KS45 FRP Data Sheet - Kingspan Insulated Panels

KS45 FRP
Data Sheet
Partition/Ceiling
System
Product Specification
Panel Lengths:
8’-0” to 52’-0”
Panel Joint:
Symmetrical double tongue and groove
castellated joint
Application:
Vertical - full or partial length coverage ;
single or double sided
Cover Widths:
45”
Panel Thickness:
23/4”
R-value:
7.2 per inch per ASTM C518 @ 75˚ F
8.25 per inch per ASTM C518 @ 35˚ F
Exterior Face:
Non-profiled, embossed
(pre-painted steel for partial height applications)
Interior Face:
Non-profiled, embossed
(pre-painted steel for partial height applications)
Reveal Options:
Standard 1/8” vertical application
Finish:
Class A Low Flame 0.90” Fiberglass Reinforced
Plastic (FRP) Opaque White
3”
4”
5”
6”
FRP
23/4”-6”
Interior Face
Exterior Face
FRP (Double-sided optional)
45” Coverage (1,143mm)
Introducing the KS45 FRP panel, this panel system
has been specifically designed and developed as a
Kingspan CLEANsafe finish to meet USDA and
CFIA mandates for void free applications of
Fiberglass Reinforced Plastic, FRP- for use in food
manufacturing and processing environments
resulting in a clean durable finish for the already
high performance properties of Kingspan PIR
insulated metal panel.
Panel Design
KS45 FRP factory bonded FRP panels offer consistent performance
with a durable scratch and dent resistant surface chemically bonded
to the Insulated panel free of voids. Class A 0.90” FRP with full height
to partial height coverage.
Customer Options
Choose from embossed or non-embossed smooth in Opaque White.
USDA or CFIA grade sealant or PVC trims available.
Applications
KS45 FRP factory bonded FRP panels are suitable for use as wall
and ceiling panels in food processing, production and ‘ready to eat’
packaging facilities where sanitation is of utmost importance. The tight
3/16” joint provides a clean low maintenance surface.
1
KS45 FRP
Data Sheet
Partition/Ceiling
System
KS45 Insulated Panel
Test
Procedure
Results
Fire
ASTM E84
Flame Spread: 25 or Less. Smoke Developed: 450 or Less
ULC-S102
Surface Burning Characteristics of Building Materials and Assemblies
ULC-S127
Flammability Characteristics of Non-Melting Foam Plastic Building Materials
UBC26-4
Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of
Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components
NFPA 259
Standard Test Method for Potential Heat of Building Materials
Strength
ASTM E72
Panel load / span and deflection tables are available
Thermal Transmission
mean temperature 35°F
ASTM C518
2” R = 15 / U = 0.067
2.5” R = 19 / U = 0.053
3” R = 23 / U = 0.043
4” R = 34 / U = 0.030
5” R = 41 / U = 0.024
6” R = 54 / U = 0.018
Air Infiltration
ASTM E283
Water Penetration
ASTM E331
No water penetration at 20.0 psf
Fatigue Test
Subjected to 2 million alternate cycles of
20 PSF positive and negative wind loading
No metal / foam delamination or metal fatigue
Humidity Test
Sample subjected to 100% relative
humidity at 140 °F for 1000 hours
No evidence of metal primer corrosion
Autoclave Test
Sample placed in an autoclave device and
pressurized to 2 PSI at 212°F for 21/2 hours
No evidence of delamination
Skin Delamination
0.003 CFM/ft² of Panel Area at 6.24 psf
No skin delamination with direct pull off pressure up to 1188 psf
FRP Coating
Test
Procedure
Results
Flexural Strength
ASTM D790
13.3 X 103 Psi
Flexural Modulus
ASTM D790
14.0 X 105 Psi
Tensile Strength
ASTM D738
6.3 X 103 Psi
Tensile Modulus
ASTM D738
7.7 X 105 Psi
Barcol Hardness
ASTM D2583
50
IZOD Impact Strength
ASTM D256
12 ft.lb/in
Coefficient of Linear
Thermal Expansion
ASTM D696
1.4 X 10-5
Water Absorption
ASTM D570
0.5%
Taber Abrasion Resistance Taber Test: (cs-17 wheels, 1000 g. wt., 25 cycles)
0.04%
Thickness
0.09”
Flame Spread and
Smoke Developed
ASTM E84
Class A rated:
F.S. = 20; S.D. = 100
Chemical Resistance
10% Sodium Chloride
No effect
10% Sodium Hydroxide
No effect
5% Sodium Hypochlorite No effect
Kingspan North America
DeLand, FL; (386) 626-6789 Caledon, ON, CA; (905) 951-5600
www.KingspanPanels.us www.KingspanPanels.ca
Langley, BC, CA; (604) 607-1101
For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com
Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for
information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and
Kingspan Limited and its subsidiaries accept no liability in respect thereof.
2
Issue 3: 10/2014