Danfoss Drives A/S

.
Danfoss Drives A/S
Global Course Catalogue 2015
This catalogue displays the eLessons and Learning Bites available on Danfoss Learning.
You can register to the courses at your convenience using the Danfoss Learning platform.
Advanced Harmonics
This eLesson is designed to assist personnel interested in providing sales support
or technical assistance for harmonic issues in general.
Individual concepts are presented on a page and that page is listed in a table of
contents. The student can do the entire presentation or go directly to the area of
primary interest.
Basic Fieldbus
This eLesson is designed for personnel who want to gain basic knowledge about
Fieldbus installations.
First step in understanding Fieldbus technology. This is a basic introduction to
Fieldbus technologies. We will outline fieldbus protocols and standards, Fieldbus
options available, application examples and basic selling points.
Basic Harmonics
This eLesson is designed to provide basic knowledge about harmonic distortion,
cause and the solutions.
Definition of harmonics: Time Domain/Frequency domain signal analysis
Calculation of total harmonic distortion THD Harmonic producing loads Standards
and recommendations Harmonic mitigation techniques.
Basic MCO
This eLesson is designed personnel interested in learning more about motion
control functions in relations to VLT AutomationDrive.
A basic introduction to MCO covering basic sales and technical information.
Includes: product type, hardware, software, product features, typical MCO
application system, application examples, benefits and selling points.
Frequency Converters Applications
This eLesson is designed to provide basic application information on frequency
converters. Designed for sales or technical personnel, to introduce basic
understanding of drive usage or applications.
The course is designed to give the student general application information.
Associated courses include detailed information, FC Motors and FC Installations.
Frequency Converters Installations
This eLesson is designed for sales or technical personnel, to introduce basic
understanding of how to properly install drives.
The course is designed to give the student general drive / motor information.
Associated courses include detailed information, FC Applications and FC Motors.
Frequency Converters Introduction
This eLesson is designed for sales or technical personnel, to introduce basic
understanding of how to properly install drives.
The course is designed to give the student general drive / motor information.
Associated courses include detailed information, FC Applications and FC Motors.
Frequency Converters Motors
This eLesson is designed for sales or technical personnel, to introduce basic
understanding of drive and motor usage.
The course is designed to give the student general drive / motor information.
Associated courses include detailed information, FC Applications and FC
Installations.
Low Harmonic Drive
This eLesson is designed for personnel interested in providing sales support or
technical assistance for low harmonic drives.
Low Harmonic Drives is designed to assist the student with learning about low
harmonic drives. Individual concepts are presented on a page and that page is
listed in a table of contents.
Closed Loop Controls
This eLesson is designed for personnel interested in knowing more about Closed
Loop Controls.
This e-lesson describes the variety of possible feedback and the control algorithm
(in popular called PID) inside the VLT® Frequency Converter.
The e-lesson is mainly designed with terms from HVAC.
PE History
This eLesson is designed for personnel interested in learning about the history of
Danfoss Power Electronics.
This course is about the history of Danfoss Power Electronics. It gives a description
of the foundation of Danfoss, how it has expanded and the first products. The
course describes the evolution of the VLT drives production and the many
variants of VLT products.
Smart Logic Controller
This eLesson is designed for personnel interested in knowing more about the
Smart Logic Controller.
Smart Logic Controller SLC is a function build in to most of the drives series from
Danfoss. The CLC is a very useful tool of functionality, which gives you a lot of
possibilities (further described in the eLesson)
In this e-lesson you will learn about the functionality and get instruction in easy
programming.
Installing for EMC
This course will take you through the best practices for installing FCs that are
compliant with EMC standards
Introduction to EMC
This course introduces the concept of electromagnetic compatibility along with
its emission, immunity and interference. This course also provides an overview of
EMC standards that are applicable
Planning for EMC
This course takes you through the process of planning an installation to be
compliant with EMC standards
Introduction to VLT Automation Drive FC360
This elesson will give you an introduction for FC51. It will cover Specification
Frame size Input and output terminals User interface Key features Literature
Service policy Positioning Industries and applications
VLT HVAC Basic FC101 Introduction
This elesson will give you an introduction for FC51. It will cover Specification I/O
terminals Local control panel Special features Literature Service policy Positioning
Industry and applications
VLT Micro Drive FC51 Introduction
This elesson will give you an introduction for FC51. It will cover - Specification - I/O
terminals - LCP - Key features - Literature - Service policy - Positioning - Industry
and applications
VLT DriveMotor FCm-FCP106
This elesson is to introduce the product specifications and features. It covers the
following content: FCP106 Overview FCP106 Enclosure Hard ware Fieldbus EMC
MHI FCM and mounting of FCP Wall mount Options Type code Technical literature
Service strategy Function release Schedule FC comparison
Functional Safety do’s and don’t’s
Do's and don't's for Sales and Service
Service Training – Disassembling C-Frame
How to disassemble VLT C-Frame Safety instructions before you start Please note:
we are aware that this elesson contains a minor speak failure - a new version will
be published asap.
MCT10 – SafePlugin
This video will help service technicians, people who work with Danfoss Safety
Options and those who want to refresh their knowledge on how to program MCT10. At the end of the video, you will learn about: - How to select the safe plugin How to understand the different page-tabs - Which programming and function
can be set? - How to configure/write to the Option - After programming - how will
these setting react? - Live demo
Danfoss VLT Soft Starters (basic information)
Why soft starter - A short description about the different types
Control Principles
This elesson is to give a general introduction of frequency converter control
principles. It includes the following topics: Control structure, PWM principle, Scalar
control, Vector control.
Motor Types
This elesson module is to give a general introduction for different types of motor.
It covers Squirrel Cage AC motor, wound rotor AC motor, Permanent Magnet
Synchronous motor, Servo Motor, Reluctance Motor, Brushless DC motor.
Long Conveyor Belt
This elesson is to introduce the basic knowledge of a long conveyor and the
danfoss drive solution for long conveyor in mining industry. It covers the
following topics: - Basics for long conveyors in mining - Danfoss solution Successful cases sharing & lost project cases - Competitor solutions
Basic Introdution to PLC
In this course, you will learn Short history of binary key and codes and basic use in
PLC. Also you will learn how to do the following:• Describe the milestones in the
development of the binary system. • Convert between binary, decimal, and
hexadecimal forms. • Explain the difference between a binary code and hits key
and binary systems for calculation. • Explain how logic gates are used. This course
will take you approximately 45 minutes to complete.
Alarms and Warnings
The course is designed for sales or technical support person who wants to get a
basic overview about Warnings, Alarms and diagnostic information, which the
drives display will show/give you
Basic Troubleshooting
The course is designed to give the student general understanding of
troubleshooting, how to start, which tools are useful, and to give the student a
basic guideline for troubleshooting in a service case.
Basic Programming
The course is designed for sales or technical support person who wants to know
about the various interface functions, and programming of the (LCP - Local
Control Panel) on the drive.
Commissioning using SmartStart
SmartStart is a new developed Quick meny available in VLT FC series. This elearning is a tutorial for the SmartStart in VLT HVAC-Drive FC102, and giudes you
trough the procedures. There is a similar SmartStart function available in VLT
AutomationDrive and VLT AQUA Drive
Frequency – Learning Bite
We all talk about frequency, and sell frequency converters, what are the
definitions for frequency: This learning bite explains important characteristic
about the term frequency.
RMS, Peak and average values – Learning Bite
Are you sometime feeling a bit lost in conversation about measuring and data on
a AC system? This learning bite gives you a shout definition to the typical used
mathematic formulas used for AC voltage and current.
Time and frequency domain – Learning Bite
Why is visualization in frequency domain some time more easy to handle than
time domain? When you analyze a AC power system for harmonics, the frequency
domain can give much valuable information. Learn here how and why.
Crest factor – Learning Bite
Do you want to know more about measurements on AC systems, specially
waveform distortion? This learning bite explains about the crest factor, which
explains the ratio between the Peak value and the RMS value (Root Mean Square)
Power factor – Learning Bite
Are you frustrated about the terms: Power factor, cosф, displacement power
factor? This learning bite gives you the formulas and definitions normally used.