docMed-Con Sterilizing Catalogue 2015 - Med
download 
Report Transcription
Med-Con Sterilizing Catalogue 2015 - Med
TABLE OF CONTENTS Sterilization Wraps...................................................................................3-8 Tray Liners..................................................................................................9 Stericlin® Light Blue Tint Rolls - Flat........................................................10 Stericlin® Gusseted Rolls.........................................................................11 Stericlin® Light Blue Tint Pouches - Flat.............................................12-13 Stericlin® Light Blue Tint Pouches - Gusseted.........................................14 Stericlin® Blue Line Laminated Non-Woven Pouches and Rolls.........15-16 Stericlin® Tyvek Pouches and Rolls.........................................................17 Seal Seam Integrity Test Kit......................................................................18 Dust Cover Bags……................................................................................19 Stericlin® Indicator Strips..........................................................................20 Stericlin® Bowie & Dick Testpack, single use...........................................21 Adhesive Tapes – with and without indicator….........................................22 Sterilope and Guardian Steam Paper Sterilization Bags......................23-24 Polystar and PMS Heat Sealers and PMS Roll Holder and cutter…....25-26 Belintra Storage and Logistic Systems….............................................27-38 Intrarack…………......................................................................................28 Uflex III Modular Racking System ............................................................29 Medicart …………….................................................................................30 Modular Transport Trolleys and Ward Trolleys.........................................31 Stainless Steel Transport Baskets and Shelves………....….....................32 Polycarbonate Baskets and Dividers….....................................................33 Label Holders and Steri-ID Tag.................................................................34 Stainless Steel Instrument Baskets ……………...................................35-37 Height Adjustable Packing tables..............................................................38 Renosem Plasma Sterilizers................................................................39-40 Terms and Conditions..........................................................................41-42 STERILIZATION WRAPS Med-Con Sterile Barriers Systems are proudly finished in Australia from Ahlstrom Fabrics. Ahlstrom is constantly improving components and developing manufacturing techniques, providing the medical community with the most advanced fabrics. Controlled non-woven construction provides unsurpassed fabric uniformity. The combination of different fibres, manufacturing processes and sequential wrapping techniques create a bacterial barrier to prevent the migration of micro-organisms. Med-Con Sterile Barrier Systems have excellent fluid repellency and provide a barrier against particles. Our nonwoven fabrics not only repel water and blood but also low tension liquids. Our product range is available in several different qualities, with the right strength for every application. The right strength for each application. Med-Con wraps reduce the risk of puncturing or tearing. They are available in a range of sizes and resistances that cover every application. The right softness for easier wrapping. Med-Con wraps are soft and smooth and non-slip, allowing fast wrapping, therefore saving time and improving efficiency. They wrap perfectly around a wide variety of items. The right permeability during Sterilization.. Med-Con wraps are more compatible with the majority of sterilizers. They deliver optimal integrity during all phases of the steam sterilization process - pre-vacuum, air removal, steam penetration and drying cycle. Fully permeable to ETO, Med-Con wraps do not impede rapid aeration of contents during desorption time. They allow for alternative sterilization with gamma radiation and E-beam processes for future commercial sterilization processing. Plasma Wrap is the newest addition to our fabric range and is designed specifically for gas plasma sterilization. The right barrier during storage. Med-Con fabrics ensure sterility of package contents until opened. There is no more effective fluid barrier. Our new range provides superior fluid repellency from simple water to the most demanding low-tension surface liquids. Liquid repellency helps avoid contamination by preventing bacteria passing through a wet area. There are no more advanced particles barriers. The manufacturing process, sequential wrapping method and accurate product selection, create a tortuous path to prevent the migration of micro-organisms. The right visual. The even uniformity allows for the immediate detection of pinholes and other eventualities that compromise the packaging integrity and sterility of medical devices. The lowest lint generation in their class. Med-Con Medical wraps resist potential damage from scuffing and rubbing, therefore providing the lowest lint generation in their class. Memory Free. When packages wrapped in Med-Con non-woven fabrics are opened they stay open, without closing back along crease lines. Med-Con wraps enable staff to remove the pack contents with a reduced risk of contamination. The lack of memory reduces any potential for spring back of the wraps. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 3 of 42 ROBUST - EXTRA HEAVY DUTY BARRIER Sheet form wraps are made from blended cellulose non-woven barrier fabric. Complies with European and Australian Standards AS:1079.5 - 2003 AS:4187 – 2003 ISO 11607-1 EN: 868 The heavy weight wrap is intended for use in large sized to extra heavy weight bundles. orthopaedic or cardiac bundles are best wrapped in Robust. Larger Bundles can be presented in Robust wrap as an inner or outer wrap. Sequential wrapping remains the clinical choice of each Health Care Facility. If the individual Health Care facility chooses to single wrap then this heavy-duty weight wrap will meet the criteria for this purpose as defined by AS 4187-2003. AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven wrapping materials for goods undergoing Sterilization in health care facilities. According to this standard, blended non woven wrapping materials for goods undergoing sterilization in health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed the minimum requirements of AS 1079.5-2003. ARTG No. 135954 Sterilization Wraps – Robust Heavy to extra heavy weight, drapable, repellent, cost effective - designed for medium -large bundles and linen packs as both a inner and outer wrap Code Description Colour Ctn Qty 567012 Robust wrap 90cm x 90cm Blue 150 567006 Robust wrap 100cm x 100cm Blue 100 567009 Robust wrap 100cm x 140cm Blue 100 567013 Robust wrap 120cm x 120cm Blue 100 567007 Robust wrap 120cm x 140cm Blue 100 567014 Robust wrap 140cm x 180cm Blue 50 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 4 of 42 ENDURANCE - HEAVY DUTY BARRIER Sheet form wraps are made from blended cellulose non-woven barrier fabric. Complies with European and Australian Standards. AS:1079.5 - 2003 AS:4187 – 2003 ISO 11607-1 EN: 868 This heavy weight wrap is intended for use for large heavy weight bundles. Heavy weight and bulky packs are ideally suited for Endurance wrap. These bundles can be presented in Endurance wrap as an inner or outer wrap. Sequential wrapping remains the clinical choice of each Health Care facility the benefits of colour choices in this heavy weight product range allow for sequential wrapping to offer practical advantages during aseptic presentation. If the individual Health Care Facility chooses to single wrap then the heavy weight wraps such as Endurance will meet the criteria for this purpose as defined by AS 4187-2003. AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven wrapping materials for goods undergoing Sterilization in health care facilities. According to this standard, blended non woven wrapping materials for goods undergoing sterilization in health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed the minimum requirements of AS 1079.5-2003. ARTG No. 135954 Sterilization Wraps – Endurance Medium to Heavy weight, Drapable, repellent and cost effective - designed for medium -large bundles and linen packs as both an inner and outer Wrap Code Description Colour Ctn Qty 568001 Endurance wrap 50cm x 50cm Green 500 568005 Endurance wrap 50cm x 100cm Green 500 568008 Endurance wrap 60cm x 60cm Green 500 568009 Endurance wrap 75cm x 75cm Green 300 568013 Endurance wrap 90cm x 90cm Green 250 568007 Endurance wrap 100cm x 75cm Green 300 568002 Endurance wrap 100cm x 100cm Green 250 568000 Endurance wrap 100cm x 150cm Green 150 568014 Endurance wrap 120cm x 120cm Green 125 568031 Endurance wrap 130cm x 150cm Green 100 568030 Endurance wrap 140cm x 100cm Green 150 568018 Endurance wrap 140cm x 180cm Green 75 568011 Endurance wrap 150cm x 180cm Green 75 568003 Endurance wrap 50cm x 100m roll Green 2 568004 Endurance wrap 1000cm x 100m roll Green 1 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 5 of 42 PERFORMANCE - MEDIUM DUTY BARRIER Sheet form wraps are made from blended cellulose non-woven barrier fabric. Complies with European and Australian Standards. AS:1079.5 - 2003 AS:4187 – 2003 ISO 11607-1 EN: 868 This medium weight wrap is intended for use in medium weight bundles. Medium weight and bulky packs are ideally suited for Performance wrap. These bundles can be presented in Performance wrap as an inner or outer wrap. Sequential wrapping remains the clinical choice of each Health Care facility. The benefits of colour choices in this medium weight product range allow for sequential wrapping to offer practical advantages during aseptic presentation. If the individual Health Care Facility chooses to single wrap then the medium weight wraps such as Performance will meet the criteria for this purpose as defined by AS 4187-2003. AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non-woven wrapping materials for goods undergoing Sterilization in health care facilities. According to this standard, blended non woven wrapping materials for goods undergoing sterilization in health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed the minimum requirements of AS 1079.5-2003. ARTG No. 135954 Sterilization Wraps – Performance Drapable, repellent, cost effective, designed for Medium bundles and linen packs as both a inner and outer Wrap Code Description Colour Ctn Qty 561001 Performance wrap 50cm x 50cm Blue 500 561005 Performance wrap 50cm x 100cm Blue 500 561003 Performance wrap 50cm x 100 m roll Blue 2 561008 Performance wrap 60cm x 60cm Blue 500 561009 Performance wrap 75cm x 75cm Blue 300 561013 Performance wrap 90cm x 90cm Blue 250 561007 Performance wrap 100cm x 75cm Blue 300 561002 Performance wrap 100cm x 100cm Blue 250 561000 Performance wrap 100cm x 150cm Blue 150 561004 Performance wrap 100cm x 100m roll Blue 1 561014 Performance wrap 120cm x 120cm Blue 125 561031 Performance wrap 130cm x 150cm Blue 100 561030 Performance wrap 140cm x 100cm Blue 150 561018 Performance wrap 140cm x 180cm Blue 75 561011 Performance wrap 150cm x 180cm Blue 75 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 6 of 42 ECONOMY AND ULTRA WRAP - STANDARD DUTY BARRIER Sheet form wraps are made from blended cellulose non-woven barrier fabric. Complies with European and Australian Standards. AS:1079.5 - 2003 AS:4187 – 2003 ISO 11607-1 EN: 868 The standard weight wrap is intended for use in small to medium sized bundles, or general-purpose use. These bundles can be presented in Economy or Ultra wrap as an inner or outer wrap. Sequential wrapping remains the clinical choice of each Health Care facility. If the individual health Care facility chooses to single wrap then the standard weight wraps will meet the criteria for this purpose as defined by AS 4187-2003. AS 1079.5 2003 Packaging for Items - Sterile, for Patient Care Part 5: non-reusable, non woven wrapping materials for goods undergoing Sterilization in health care facilities. According to this standard, blended non woven wrapping materials for goods undergoing sterilization in health care facilities must conform to a minimum of 60 minutes minimum time for fluid penetration according to the official mason jar test (INDA Standard Test Method IST 80.5-92). All grades exceed the minimum requirements of AS 1079.5-2003. ARTG No. 135954 Sterilization Wraps – Economy Standard weight, repellent, cost effective, designed for small items and linen packs as both a inner and outer Wrap Code Description Colour Ctn Qty 569025 Economy Wrap 40cm x 40cm Blue 1000 569000 Economy Wrap 50cm x 50cm Blue 1000 569001 Economy Wrap 60cm x 60cm Blue 500 569003 Economy Wrap 75cm x 75cm Blue 300 569005 Economy Wrap 80cm x 80cm Blue 300 569007 Economy Wrap 90cm x 90cm Blue 250 569010 Economy Wrap 100cm x 100cm Blue 250 569012 Economy Wrap 120cm x 120cm Blue 125 569014 Economy Wrap 100cm x 140cm Blue 150 569015 Economy Wrap 130cm x 150cm Blue 100 569017 Economy Wrap 140cm x 140cm Blue 75 569018 Economy Wrap 140cm x 180cm Blue 75 569019 Economy Wrap 120cm x 140cm Blue 100 569021 Economy Wrap 100cm x 100cm roll Blue 1 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 7 of 42 ECONOMY AND ULTRA WRAP - STANDARD WEIGHT ARTG No. 135954 Sterilization Wraps - Ultra Wrap Standard weight, repellent, cost effective, designed for small items and linen packs as both a inner and outer Wrap Code Description Colour Ctn Qty 562001 Ultra Wrap 50cm x 50cm Green 500 562008 Ultra Wrap 60cm x 60cm Green 500 562009 Ultra Wrap 75cm x 75cm Green 300 562013 Ultra Wrap 90cm x 90cm Green 250 562019 Ultra Wrap 60cm x 100m roll Green 1 562002 Ultra Wrap 100cm x 100cm Green 250 562000 Ultra Wrap 100cm x 150cm Green 150 562004 Ultra Wrap 100cm x 100m Green 1 562014 Ultra Wrap 120cm x 120cm Green 125 562016 Ultra Wrap 120cm x 150cm Green 125 562011 Ultra Wrap 150cm x 180cm Green 75 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 8 of 42 TRAY LINERS Functions and Advantages of a Tray Liner • Tray liners by Med-Con are specifically designed to provide a soft, low linting, highly absorbent fabric that absorbs seven times its own weight in water. This is essential in assisting with wicking excessive moisture from trays, instruments and bowl sets. • Low in Lint - all high quality tray liners provide protection from fabric that generates lint. Modern non-woven fabrics have replaced products in theatres, which have the potential to produce lint such as paper and cotton. • Less labour intensive - reduction in costs associated with maintenance and laundering of linen. • Multiple applications - prevents tearing of wraps from abrasion between the tray corners and storage shelving when used between the wrap and tray. Reduces wear and tear on instruments during processing and transport increasing the useful life of instruments and reducing risk of potential for wet load. • Can be used in Steam and ETO sterilization Tray Liners Code 515020 515021 515022 515024 515023 515031 515032 515033 515034 Description Tray liners 10cm x 27cm Tray liners 24cm x 27cm Tray liners 24cm x 37cm Tray liner 27cm x 30cm Tray liners 27cm x 50cm Tray liner 27cm x 40cm Tray liner 27cm x 60cm Tray liner 50cm x 60cm Tray liner 75cm x 60cm Colour White White White White White White White White White Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 500 500 500 400 500 200 200 200 200 9 of 42 STERICLIN® LIGHT BLUE TINT ROLLS - FLAT STERICLIN® FLAT ROLLS ISO 11607- 2 ; EN 868-3 and -5 for laminates Construction: 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6. • light blue tinted transparent film Polyester / Polypropylene (PETP/PP). • heat sealable, sterilization resistant colours, water based. • non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm Special features i/d of core 76 mm, inside core QC-label with batch-Number etc. Printing details: Indicators, description / size, article Number and batch Number after the backslash, manufacturer and brand name are printed onto the paper, covered by the seal. Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization! Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing temperature should be in the range of 180°-200°C. Sizes: Flat reels are available in 9 standard widths, length 200m. Method of use STERICLIN® see-through reels should be cut off, according to the item to be packed. Make a bottom seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab of 15 to 20mm. A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the seal. To remove content peel apart the film and the paper. STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO 9001. The CE-kitemark is printed onto the outer carton. ARTG No. 135955 Reels – printed, with Indicator Light Blue Tint Rolls – Flat Code Description 800301 50mm x 200 metres 800302 75mm x 200 metres 800303 100mm x 200 metres 800304 150mm x 200 metres 800305 200mm x 200 metres 800306 250mm x 200 metres 800307 300mm x 200 metres 800308 380mm x 200 metres 800409 420mm x 200metres Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 10 of 42 STERICLIN® GUSSETED ROLLS STERICLIN® GUSSETED ROLLS ISO 11607- 2 ; EN 868-3 and -5 for laminates Construction: 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6. • light blue tinted transparent film Polyester / Polypropylene (PETP/PP). • heat sealable, sterilization resistant colours, water based. • non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm Special features i/d of core 76 mm inside core QC-label with batch-Number etc. Printing details: Indicators, description / size, article Number and batch Number after the backslash, manufacturer and brand name are printed onto the paper, covered by the seal. Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization! Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing temperature should be in the range of 180°-200°C. Sizes: Gusseted reels are available in 7 standard widths, length 100m. Method of use STERICLIN® see-through reels should be cut off, according to the item to be packed. Make a bottom seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab of 15 to 20mm. A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the seal. To remove content peel apart the film and the paper. STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO 9001. The CE-kitemark is printed onto the outer carton. ARTG No. 135955 Light Blue Tint Rolls – Gusseted Code Width x Length x Gusset Height 800402 75mm x 100 metres x 25mm 800403 100mm x 100 metres x 50mm 800404 150mm x 100 metres x 50mm 800405 200mm x 100 metres x 50mm 800406 250mm x 100 metres x 65mm 800407 300mm x 100 metres x 65mm Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 1 roll 1 roll 1 roll 1 roll 1 roll 1 roll 11 of 42 STERICLIN® LIGHT BLUE TINT POUCHES - FLAT SEE-THROUGH POUCHES ISO 11607- 2 ; EN 868-3 and -5 for laminates Product Specifications • 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6. • heat sealable, sterilization resistant colours, solvent free. • Light blue tinted transparent film Polyester / Polypropylene (PETP/PP). Product design • Non-toxic steam-, E.T.O.-gas- and Formaldehyde- indicators are placed outside the filling area – • no danger of migration of indicator ink onto sterile goods! • Sealed edges - no dust sedimentation between film and paper! • Chevron seal for easy peeling. • Thumb-cut-out for easy filling and easy peeling. Sealing For see-through pouches and reels commercial continuous sealing devices are most suitable. The sealing temperature should be in the range of 180 - 200°C. Printing details: • Description / size • Article Number and Batch Number after the backslash • Manufacturer and brand name Method of sterilization Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasma-Sterilization! Method of use STERICLIN® see-through pouches should be filled from below, sharp or pointed items should be protected in order to avoid damaging the pouch. A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the seal. The pouches should be placed in a container (e.g. sterilization basket) so that they support one another. A sterilization basket is optimally filled when the pouches stand upright and you can push your hand comfortably between the pouches. To remove content peel apart the film and the paper. STERICLIN® pouches are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO 9001. The CE-kitemark is printed onto the outer carton. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 12 of 42 STERICLIN® LIGHT BLUE TINT POUCHES FLAT cont’d… ARTG No. 135955 Light Blue Tint Pouches – Flat Code Description 802495 55mm x 200mm 801933 75mm x 150mm 801956 75mm x 200mm 801901 75mm x 250mm 801207 75mm x 300mm 801921 100mm x 150 mm 801922 100mm x 200mm 801902 100mm x 250mm 801939 100mm x 300mm 801941 100mm x 360mm 801955 100mm x 400mm 801944 100mm x 520mm 801940 150mm x 200mm 801942 150mm x 270mm 801943 150mm x 300mm 802497 150mm x 380mm 803960 200mm x 610mm (scope packs) 801929 200mm x 400mm 801904 220mm x 300mm 803964 220mm x 420mm (scope packs) 801945 250mm x 400mm 801930 250mm x 480mm 801928 300mm x 570mm 801905 320mm x 500mm 801957 360mm x 580mm Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 13 of 42 STERICLIN® LIGHT BLUE TINT POUCHES - GUSSETED STERICLIN® GUSSETED POUCHES ISO 11607- 2 ; EN 868-3 and -5 for laminates Construction 70 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6. • light blue tinted transparent film Polyester / Polypropylene (PETP/PP). • heat sealable, sterilization resistant colours, water based. • non-toxic STEAM, E.T.O.-GAS and FORMALDEHYDE indicators at intervals of 135 mm Special features i/d of core 76 mm inside core QC-label with batch number etc. Printing details: Indicators, description / size, article number and batch number after the backslash, manufacturer and brand name are printed onto the paper, covered by the seal. Method of sterilization: Steam, E.T.O.-gas, formaldehyde - not for gamma-rays or plasmaSterilization! Sealing: For see-through reels commercial continuous sealing devices are most suitable. The sealing temperature should be in the range of 180°-200°C. Sizes: Flat reels are available in 10 standard widths, length of 200m or 100m, gusseted reels are available in 7 standard widths, length 100m. Method of use: STERICLIN® see-through reels should be cut off, according to the item to be packed. Make a bottom seal right at the end of the tube. Fill the pouch and seal at the top end leaving a peel tab of 15 to 20mm. A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the seal. To remove content peel apart the film and the paper. STERICLIN® reels are in accordance with DIN EN 868-5. VP STERICLIN® is certified to EN ISO 9001. The CE-kitemark is printed onto the outer carton. ARTG No. 135955 Light Blue Tint Pouches – Gusseted Code Width x Length x Gusset Height 801931 300mm x 610mm x 65mm 801959 410mm x 610mm x 65mm 801950 150mm x 400mm x 50mm 801949 100mm x 300mm x 50mm Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 500 500 1000 2000 14 of 42 STERICLIN® BLUE LINE SEE THROUGH LAMINATED NON-WOVEN POUCHES AND ROLLS The pouches specialized for heavy weight goods STERICLIN® Blue Line see-through non-woven pouches and reels are the packaging solution for heavy, bulky and over length goods like metal bowls and retractors. The pouches are manufactured from 60-g/m2 strong non-woven subsequently sealed on a compound film. Three indicators for steam, EO- and formaldehyde-sterilization are printed on, of course apart the filling area. The Blue Line combines all the advantages of the paper-film-see-through-pouch with the advantages of non-woven material. E.g. because of the increased softness of the non-woven material the pouches are much easier and faster filled than pouches made of paper and film. Instructions for use: STERICLIN® Blue Line see-through non-woven pouches were designed tor stand much higher stresses than normal pouches. Nevertheless it is necessary to follow some essential rules by using this packaging material. Filling: STERICLIN® Blue Line see-through pouches should be filled only up to three quarter of their overall space. Sharp or pointed items should be protected separately in order to avoid damage to the pouch. An empty space of at least 5 cm from the seal area should be maintained in order to avoid stress on the seal. Avoid any kind of folding - this potentially weakens the laminate material! Bowl type medical devices should be packed with the hollow side to the non-woven side of the pouch in order to ensure the best possible steam penetration Sealing: For see-through pouches commonly available continuous sealing devices are most suitable. The sealing temperature should be in the range of 180° - 190°C. Place inside the sterilization basket: Smaller packs should be placed in a container (e.g. sterilization basket) so that they support one another. Place the pouches film-to-film and non-woven to non-woven. Larger packs must be laid with the non-woven on the downside. This eases steam penetration and drying. Always take heed of the Sterilizers manufacturers instructions for use, correspondingly use validated configurations. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 15 of 42 STERICLIN® BLUE LINE -SEE THROUGH LAMINATED NON-WOVEN POUCHES AND ROLLS cont’d… After sterilization: Check the change of colour of the indicator after the sterilization process and look for any kind of damage on the package. If the packs are still wet 30 minutes after the sterilization process they are not storable and must be newly packed. Open: To maintain an easy opening of the pouch with a heavy load there are specially marked and shaped seals on both edges of the pouch. Lay down the pouch for the opening procedure on a table, open the sealed edges – these prevent dust sedimentation – and peel apart the film and the non-woven. Storage: Store the pouches away from dampness, soiling, vermin, mechanical strains, extreme temperatures and ultraviolet rays. Store separately from un-sterile Goods. Refer to Australian Standards and DIN 58953 part 7 and other norms for storage conditions. ARTG No. 135955 Code 801591 801593 801595 801980 801981 801620 801642 Description Blue Line see through non-woven pouch, 27 x 36 cm Blue Line see through non-woven pouch, 32 x 45 cm Blue Line see through non-woven pouch, 40 x 52 cm Blue Line see through non-woven pouch, 50 x 60 cm Blue Line see through non-woven pouch, 57 x 72 cm Blue Line see through non-woven rolls, 20cm x 100 metres Blue Line see through non-woven rolls, 42cm x 100 metres Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 500 500 250 250 250 1 roll 1 roll 16 of 42 STERICLIN® TYVEK POUCHES AND ROLLS ® POUCHES and Rolls made of TYVEK and PETP/PE ISO 11607- 2; EN 868-10 and -5 for laminates; CE mark Method of Sterilization: • H2O2-plasma-low-temperature Sterilization; Pouches are printed with Plasma-Indicator. • ETO-Gas, Formaldehyde and γ-rays-Sterilization not for steam Sterilization ! Advantages of TYVEK® (registered trademark of DuPont): • effective barrier against bacteria • extremely tough, puncture and tear resistant • easy and clean peeling without linting • low absorption, quick de-absorption of EtO gas Construction: • TYVEK® 1073 B with water resistant coating • Polyester/Polyethylene-compound film 12/50 µ • Printed with Plasma-Indicator, colour change from Blue to Red Sealing: • 120° - 130°C ARTG No. 135955 Codes 801972 801977 802498 801974 801976 801961 801962 801963 801964 801965 801966 801967 Description 75mm x 200mm pouches 100mm x 270mm pouches 150mm x 300mm pouches 200mm x 400mm pouches 250mm x 480mm pouches 75 mm x 100 metres 100mm x 100 metres 150mm x 100 metres 200mm x 100 metres 250mm x 100 metres 300mm x 100 metres 380mm x 100 metres Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 1000 500 500 500 500 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 17 of 42 SEAM SEAL INTEGRITY TEST KIT Description: The seal seam, which is a daily occurrence on your heat sealer, has to meet several requirements: EN 868-5 requires a consistent seal seam which has to be a minimum strength of 1.5 Newton per 15 mm seal seam - before and after sterilization. ISO 11607-1 goes on further: This standard requires a validation of the sealing and packing process. Several tests regarding see-through packaging materials have to be done. Among these, has the user to prove the completeness and integrity of the seal seam after sterilisation, transport and storage. With the seal seam integrity test from stericlin® you get a simple tool to check these requirements. Daily checking of the seal seams produced by your heat sealer is quite simply by means of a specially designated testing solution. With the seal seam test from stericlin® it is possible to cover a large part of the testing required for the validation of your sealing- and packing process according to ISO 11607. Application: 1. Use the pipette to take some testing solution from the bottle. 2. Sprinkle the seal seam between paper and film completely with the fluid (see picture). The pipette should not touch the seal seam to prevent mechanical damage to the seal. 3. Using the stop watch wait 20 seconds after the fluid has been applied then check the seal seam visually. The fluid must not penetrate the seal seam. Note: a longer contact time than 20 seconds will falsify the result! 4. Let the samples dry and document the result of the test on the documentation sheet. Clean the pipettes after use with water and let dry completely. ARTG No. 136968 Code 804650 Description Seal Seam Integrity Test Kit – Soln, droppers and beaker. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Qty 1 18 of 42 DUST COVER BAGS Description: Dust covers are made of transparent Polyethylene-film. Manufactured from low-density polyethylene materials to protect sterile packaging from contamination during transport and storage. Sterile packs must be cool and dry before packed into dust-cover-bags. The dust covers offer departments a choice in Sealing. 1. Heat Sealable 2. Self Sealing and may be re sealed up to ten times. Code 803030 803038 803039 803031 803032 803040 803033 803034 Description 200 x 300 mm + 50 mm 250 x 400mm + 50 mm 250 x 1500 mm + 50 mm 300 x 500 mm + 50 mm 420 x 700 mm + 50 mm 600 x 500 mm + 50 mm 600 x 750 mm + 50 mm 200 x 750 mm + 50 mm unprinted Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 1000 500 500 500 500 100 100 500 19 of 42 STERICLIN® INDICATOR STRIPS Indicator, Sterilization: chemical strip, class 1, for pre-vacuum steam Sterilization Indicator strips with Class 1 Chemical Indicators for STEAM, ETO and FORMALDEHYDE sterilization EN 867-2 / ISO 11140-1 Application: For identification of sterile goods, by indicating to users that the item has been processed. Mode of application: Add the indicator strip to the sterilization goods. Sterilize with standard cycle. Evaluation: Examine the colour of the indicator under sufficient light conditions and assess the colour change. A distinct colour change shows that the important sterilization parameters have been achieved. The typical colour changes are: Steam Formaldehyde E.T.O. pink ⇒ black brownish violet ⇒ green white ⇒ yellow Colour Change: If the colour change is incomplete some or all of the important sterilization parameters have not been reached. Consider the concerned batch as <non-sterile>, check your Sterilizer. Safety advises, Storage and Shelf life from date of manufacture: Do not interfere with the indicator ink directly or indirectly. The indicators are destined for single use only. The indicators have to be protected against direct UV-light and have to be stored at a temperature of 15°C - 25°C with a relative humidity of 35 - 50 %. Shelf life for indicator products is 2 years from date of manufacture. Manufacturing date and expiry date are stated on the product labelling. Sterilization monitoring products with chemical indicators are not classified as medical products under the rules of the European Medical Device Directive and therefore are not subject to CE-marking! ARTG No. 137090 Code 804092 804079 804098 Description Steam – 150 x 30 Steam/Self Adhesive – 150 x 30 ETO – 150 x 30 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 250 pcs 250 pcs 250 pcs 20 of 42 STERICLIN® BOWIE & DICK TESTPACK, ONE TIME USE Bowie & Dick – Class 2 Indicator Single Use Test Pack DIN EN 867-3, EN 867-4 The Sterilope Bowie & Dick indicator test sheet / pack fulfils the performance requirements of EN 867-3 respective EN 867-4 • Colour change from blue to pink • The indicator ink does not contain any heavy metals! • Shelf life: 4 years from date of manufacture • Reproducible test results: single use test packs can not be prepared in a different or false way ® The outer label provides space for identification remarks: • Sterilizer / Machine number • Date • The outer indicator dot shows clearly whether the pack has been processed or not. ARTG No. 137090 Sterilope Bowie & Dick Testpack Code Description 801971 Bowie & Dick testpack Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 20 21 of 42 ADHESIVE TAPES – WITH AND WITHOUT INDICATOR High Temperature Adhesive Tapes for STEAM ETO and DRY HEAT sterilization. Adhesive Tapes with Chemical Indicators for STEAM, ETO and DRY HEAT sterilization Application: For fixing of sterile packs made of wrapping paper and / or non-wovens. For identification of sterilized/ non-sterilized packs. Evaluation: Examine the colour of the indicator in sufficient light and assess the colour-change. A distinct colour change shows the important sterilization parameters have been achieved. The typical colour changes are: Steam Green ⇒ brown/blk E.T.O. Dark red ⇒ green Dry Heat Green ⇒ yellow Colour Change: If the colour change is incomplete some or all of the important sterilization parameters have not been met. Therefore the batch should be considered as ‘non-sterile’ - check your sterilizer. Safety advice: Do not compromise the tape directly or indirectly by use of solvent pens. The indicator tapes are designed for single use only. Storage and shelf life: The tapes and indicator tapes must be protected against direct UV-light and must be stored at a temperature of 15°C - 25°C and a relative humidity of 40 - 60%. All tapes with and without indicator have a shelf life of 2 years after date of manufacture. Please note: CE marking is not applicable for indicator products, because this product is not considered a medical product under the clause of the EC-directive 93/42/EWG. ARTG No. 137090 Adhesive tapes width x 50m/roll Code Description 802096 Plain Adhesive Tapes– 19mm 802097 Plain Adhesive Tapes – 25mm Adhesive tapes with indicator width x 50m/roll Code Description 802093 STEAM – 25mm 802084 STEAM – 19mm 802083 STEAM extra strong adhesive – 19mm Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 48 reels 36 reels Ctn Qty 36 48 48 22 of 42 STERILOPE AND GUARDIAN STEAM PAPER STERILIZATION BAGS Paper Bags with heat seal top CE / EN 868 • 60 g/m² sterilization paper conforming to EN 868-3 and DIN 58953, parts 2 and 6. • heat sealable, sterilization resistant adhesives and colours, solvent free. • non-toxic steam indicator. Sizes: standard sizes with either heat seal-top or plain top (without heat-seal-coating). Manufacturer's trademark, dimension, order Number Double folded, heat sealed and glued bottom seal Method of sterilization: Steam, E.T.O.-gas, formaldehyde, gamma-rays - not for plasma-Sterilization! Method of use: Paper bags should only be filled to 3/4 of their capacity. A free space of at least 3 cm from the seal area should be maintained in order to avoid stress on the seal. After sealing, the filled bags should be placed in a container (e.g. sterilization basket), so they support by one another. Sealing: The sealing temperature should be approx. 180°C. For paper bags rotary sealing machines are most suitable. Sterile removal of contents: Scissors should be used to cut and remove the contents. It is not desirable to peel open paper bags and maintain a good aseptic presentation. Avoid tearing open bags, as this can lead to the generation of undesirable particles. STERILOPE paper bags are in accordance with EN ISO 11607 ARTG No. 135953 Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 23 of 42 Code 501001 500025 500064 500055 500067 500114 500069 500110 500135 500078 500180 500112 500022 500254 Description (length x width x height) Number1 Satchel 195mm x 128mm x 50mm Number 2 Satchel 340mm x 200mm x 33mm Number 4 Satchel 340mm x 255mm x 55mm Number 5 Satchel 270mm x 168mm x 68mm Number 7 Satchel 270mm x 70mm x 35mm Number 8 Satchel 195mm x 70mm x 35mm Number 9 Satchel 490mm x 70mm x 35mm Number 10 Satchel 155mm x 90mm x 50mm Number 13 Satchel 340mm x 165mm x 70mm Number 18 Satchel 155mm x 70mm x 38mm Number 21 Teat Cover 135mm x 74mm x 40mm Number 21 Bottle Cover, extra long 187 x 74 x 41mm Number 22 Satchel 340mm x 300mm x 64mm Number 30 Satchel 440mm x 200mm x 98mm Gram 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm Ctn Qty 2000 500 500 1000 2000 2000 1000 2000 1000 1000 2000 1000 500 500 Gram 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm 57 gsm Ctn Qty 1000 500 500 1000 1000 1000 2000 500 250 1500 GUARDIAN paper bags are in accordance with EN ISO 11607 ARTG No. 109918 Code 370001 370025 370045 370075 370095 370015 370177 370200 370254 370315 Description (length x width x height) Number 1 Satchel Number 2 Satchel Number 4 Satchel Number 7 Satchel Number 9 Satchel Number 13 Satchel Number 21 Satchel Number 22 Satchel Number 30 Satchel Number 24 Sanitary Napkin Bag Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 24 of 42 POLYSTAR HEAT SEALERS 35 75001 35 75002 620 DSM Rotary Heat Sealer 620 DSM Rotary Heat Sealer Right Hand Side Feed Left Hand Side Feed Used for • Continuous sealing of sterilization bags (paper/paper) • Sterilization of pouches (paper/plastic) Provides gold standard in heat sealing • Will Provide seal speed 6.2m/min • Heat seal width 12mm casing made of stainless steel. 35 75003 980 DSM Rotary Heat Sealer Used for • Continuously sealing sterilization film and bags (paper/paper) or (paper/plastic.) Provides gold standard in heat sealing • Seal speed 9.8m/min • Heat seal width 15mm, • Digital temperature and counter indicator • Automatic start/stop or conveying system, • casing made of stainless steel. Advantages: • . Digital thermostat • . Accuracy of temperature +/- 2 % • . Casing and table made of stainless steel • . Engine of low noise • . "GS" approved and "CE" conforms Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 25 of 42 PMS HEAT SEALERS AND ROLL DISPENSER PMS Medikal is a global supplier of Sterilization Control Products and Pack Closure Systems with state of the art, high-tech manufacturing equipment. PMS Medikal products are served in more than 60 countries worldwide on a continuous base. The manufacturing system is certified with ISO 9001 and ISO 13485; all products conform to international norms like EN 868, ISO 11607, ISO 11140 and are CE marked. Description/Application: A variety of heat sealers are available, they are extremely easy to use made with solid durable stainless steel for hygiene. One power is on and temperature is set, the decide works when needed and stops automatically when the work is done. Accurate temperature control allows sealing of Tyvek pouches. All Sealers correspond to DIN 58953-7. Multi line sealing, temperature control by microprocessor, digital LED display, adjustable seal distance and many other features. Model SS101: Rotary Heat Sealer Model SS201: Rotary Heat Sealer with Printer Model PM101: Rotary Heat Sealer Introducing Pouch Mate Automatic Cutting and Sealing Device In principle, the Pouchmate™ combines a roll dispenser and a rotary sealing device. Unlike usual roll dispenser & cutting devices, Pouchmate™ operates fully automatic. After the length and quantity adjustments are determined through the panel, Pouchmate™ will produce the ready to fill pouches from any sterilization reel in required length and quantity. The built-in rotary sealing system integrates with the automatic feeding system continuously and seals the reel right below the cutting line. The pouchmate™ medical sealing system can be also used separately for cutting or sealing operations. Model KA201: Roll Dispenser and Cutter Solve your laminate roll storage, dispensing and cutting all in the one rack. Can be used on the bench or mounted on a wall, made of Stainless steel. This robust unit has a cutting system does not generate paper dust, long life rotary knife which sharpens automatically while working. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 26 of 42 BELINTRA Application: Belintra is your reliable partner for storage and transport of instruments and medical material for pharmacy, surgery, central sterilization and cleanrooms. The effective management of logistics is vitally important in the health care industry. Efficient storage and transport practices can help to reduce the efforts required to address these issues and redirect the resources to patient care. We understand very well that our customers do not all have the same working methods or demands. That is why we prefer to work in close consultation with our customers to find the products that best meet their requirements and fit best within their environment. Benefits: Whether it is collection of dirty instrument from theatre, cleaning, washing, decontaminating, sterilizing, storage and return to theatre, or pharmacy and medication distribution, a Belintra integrated system where all parts fit together as a complete logistic system that ensures effective, safe and smooth transitions from one area of the hospital to another. Belintra storage forms the main building blocks for the FIFO system. Range: Medicarts, Open Modular Ward Trolleys, Mobile Work Stations, Modular Transport Trolleys, Closed Transport Trolleys, Linen Distribution Trolleys, Uflex III Modular Storage System, Baskets, Trays and Shelves, Intrarack, Instrument Baskets, Height Adjustable Packing Tables and an extensive variety of accessories. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 27 of 42 INTRARACK Application: Our modular IntraRACK wire-rack system will meet all your storage and transport needs throughout the entire hospital. The IntraRACK system can be used in nursing and other units to store and transport linen or other sterile and non-sterile items. The range of shelf sizes, upright heights and the optional mobile use of this system offer logistics and nursing staff a myriad of possibilities. Benefits: As both the uprights and the shelves are available in various sizes, this system will allow you to make the best possible use of the available space. The IntraRACK system is easy to install. No bolts or tools are required. The conical sleeves around the uprights ensure that the shelves remain firmly in place. As the height of the sleeves can be adjusted, you can tailor the unit to the items you wish to store in them. The racks have been designed for stationary and mobile use. For stationary use, the uprights are fitted with an adjustable foot while the mobile uprights can be fitted with swivel castors. Many accessories and options are available, tell us about your requirements and we will customize the system to suit your needs. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 28 of 42 U-FLEX STORAGE SYSTEM Description: The UFlex 3 modular storage system is a combined system was designed with functionality, durability and stability in mind. The result is a unique storage system manufactured from anodised aluminium with durable and high quality components. Each column features the potential of a wide variety of baskets and shelves as storage options. Each column comprises two uprights that are connected to each other by a set of four spacers (4 = 1 set). The stands are fitted with adjustable plastic feet. The customer can determine the distance between the rails at 68mm intervals. The loading capacity is 600kg per stand, 25 kg per location with Tourne-click rails. Shelves with the same depth offer endless combinations. It is possible to join several columns, eg. a column for baskets combined with a column of shelves. The UFlex 3 system offers ergonomic and hygienic storage solutions for sterile packs, containers or componets. Suitable for CSSD, the OR, the pharmacy, the warehouse and many other departments. The UFlex 3 system is synonymous for quality, flexibility and long life. Many types of baskets and shelves are available to customize your set-up. High quality polycarbonate baskets of various depths with dividers are available as well as economical ABS baskets; the system is modular allowing the greatest flexibility for your storage requirements. We can evaluate measure and advise the optimal setup for your budget and space. Remember you can start with just one two-column set up. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 29 of 42 MEDICART Description: Medicart with drawers is a multifunctional, modular trolley with numerous possibilities in terms of structure and applications. Medicarts have been designed in accordance with the most stringent safety standards and meet all the ergonomic and hygiene requirements. Kydex worktop continuous Kydex worktop comes with raised edges on three sides. As it is devoid of any sharp corners the worktop is easy to clean. The worktop is scratch proof, can be cleaned with ordinary cleaning products and disinfectants, and is UV and heat-resistant. The surface can be cleaned to perfection, even after coloured disinfectants, e.g. ISO Betadine, have been spilled. Runners have been fitted with a soft-closing system. As the drawer is 105% extendible, trays can easily be lifted out of the frame. Handles the drawers have been fitted with aluminium handles, which, thanks to their rounded corners, can be easily cleaned and disinfected. Locks The Medicart can also be fitted with a lock if required. Castors Studies have shown that double castors reduce rolling resistance by 50% and make the cart easier to maneuver. The Medicart comes with double Tente swivel castors, 1 of which has been fitted with a brake and 1 with a swivel lock (antistatic). Medicart Roller Shutter a multifunctional, modular cart, which distinguishes itself in terms of choice of materials, ergonomics, hygiene, durability design. The cart can be fitted with numerous internal components: from baskets to trays, in grid panels or on telescopic runners. The cart’s contents and accessories can be fully tailored to your individual needs and you also have the option of combining baskets and medication trays. Whether used for medical care or to transport and/or distribute medication, the Medicart is the most ergonomic, hygienic and patient-safe application. Available in low or high profile. • Fitted standard with ergonomic grid walls with built-in stops for modular 600 x 400 mm baskets. • Closed with a plastic roller shutter with integrated anodized aluminium handle. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 30 of 42 MODULAR TRANSPORT TROLLEYS and WARD TROLLEYS Description: Our ISO transport trolleys, based on Euronorm 400 x 600 mm, have been specifically designed to transport goods between the various units. They allow logistics staff, pharmacists and nursing staff to easily transfer modular trays from the storage system to the trolleys and vice versa. When fitted with a cover, the goods in the ISO trolley will remain protected and secure during transport. Modular transport trolleys, high gloss white polyester coated steel trolleys with high UV and solvent resistance. A BACT-O-STOP® silver based additive, which prevents the propagation of all known bacteria is added to the powder coating. Fitted with 11 pairs of U or L shaped nylon rail inserts, the trolley can accommodate all standard Euronorm trays or baskets (60 x 40 cm). Running gear: 4 non-marking Tente® rubber swivel castors Ø 125mm, 2 with brakes. 4 plastic padded corner deflectors. One, two or three column trolleys are available, optional stainless steel, push handles, shelving and telescopic rails. Description: Our range of open, modular ward trolleys distinguishes itself in terms of durability, hygiene, excellent maneuverability and load-bearing capacity. These trolleys were designed in accordance with the Euronorm standard. They all have a high-quality, powder-lacquered steel frame. Their finish is UV resistant, scratch proof and impervious to most chemical products. This trolley meets the most stringent hygiene requirements. Thanks to the addition of the additive “BACTOSTOP” to the coating of the ward trolley, the multiplication of all common bacteria is prevented. The ward trolleys have also been fitted with a number of attachment points to accommodate a range of accessories. Even long after you took delivery of the trolley, its accessories can be adjusted, by your own technical staff. Belintra uses accessories that are screwed in rather than hooked on, which prevents damage to the lacquer, noise, loss and theft. The various models allow you to cater for the most diverse nursing care situations. Please ask for more information from our Belintra Range. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 31 of 42 STAINLESS STEEL TRANSPORT BASKETS and SHELVES These stackable and nestable baskets have been designed to store wrapped instrument baskets protecting them from damage that can happen in storage and transport. They can be processed all the way from washing, to sterilization to storage. As a sterilization, transport and storage component, these stainless steel wire baskets will prove to be an invaluable tool in your instrument set sterilization process. The wire baskets can be used in all Belintra transport trolleys and storage systems. Our sterisystem highly polished wire trays are the perfect solutions if you need to sterilize, transport and store larger sterilization packs. Manufactured in accordance with the highest quality standards and finished to perfection, these wire trays meet the most stringent CSSD and OR requirements. Belintra wire trays can be used in all our transport trolleys and storage systems. Stainless Steel Wire Baskets Code Description 3000500002 Wire basket 60 x 40 x 10 cm 3000500004 Wire basket 60 x 40 x 13 cm 3000500007 Wire basket 60 x 40 x 20 cm Stainless Steel Wire Basket DIN 3000500001 Wire basket 60 x 30 x 4 cm Sterilization Basket 3000500012 Wire basket 57.5 x 28 x 27 cm Stainless Steel Wire Shelves 3000300007 Wire shelf 60 x 40 cm Ctn Qty ea ea ea ea ea ea Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 32 of 42 PC BASKETS AND DIVIDERS Description: Our modular, injection moulded polycarbonate (PC) baskets are extremely impact-resistant, durable andtransparent due to the carefully selected raw and other materials combined with continuous quality control throughout the entire production process. The standard Euronorm external dimensions, i.e. 600 x 400 mm, ensure that the trays can be used in all our storage and transport systems, medical care and medication distribution trolleys. Polycarbonate (PC) has excellent mechanical properties; baskets have a load-bearing capacity of 35kg and are extremely break-resistant when exposed to sudden, high impact situations. Polycarbonate can withstand temperatures of between -40°C and +120°C, with the result that our baskets can be sanitized at a temperature of up to 120°. In the event of contamination, the baskets can also be put through a steam tunnel. Polycarbonate (PC) dividers are slotted into the grooves, with the result that they are extremely well secured. Thanks to their design, these same PC dividers can also be used in our closed boxes. The PC dividers can be shortened to create a range of compartments. The dividers are inter-secured by means of a T connection. PC Baskets Code Description Ctn Qty 1500400010 ea Closed tray 60 x 40 x 5 cm 1500400006 ea Basket 60 x 40 x 10 cm 1500400008 ea Basket 60 x 40 x 20 cm PC Dividers Height 5 cm 1500300012 1500300017 PC Dividers Height 10 cm 1500300007 1500300013 PC Dividers Height 20 cm 1500300009 1500300015 40 x 5 cm 60 x 5 cm ea ea 40 x 10 cm 60 x 10 cm ea ea 40 x 20 cm 60 x 20 cm ea ea ABS, Medibox and Polypropylene boxes are available to use across the sterisystem. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 33 of 42 LABEL HOLDERS Description: Our Multifix label holders can be affixed to the baskets and PC dividers in an upright and in a horizontal position. The label holders come with a front and back mount to ensure that they remain firmly in place. Label holders are positioned in between the grooves of the baskets so that they do not become detached when you take a box out of the baskets. Label holders allow you to easily label trays and baskets that have been subdivided into various sections. This makes it easier to organize the contents and to optimally subdivide your trays and baskets. Label holders allow you to clearly label the contents of trays and baskets so that users can swiftly find what they are looking for. Multifix label holders can be affixed in an upright or horizontal position. Our label holders can quickly and easily are affixed to all our trays, baskets and PC dividers. Multifix label holders consist of 3 parts: a label holder, a mounting plate and a label. Multifix label holder Code Description 1500800060 Credit card size Multifix label holder Ctn Qty ea STERI-ID LOOP The Steri-ID Loop has a RFID tag imbedded; thanks to an open platform you have the opportunity to make a selection among different suppliers of RFID writing and support technologies. The imbedded tag is resistant to washing, chemicals and autoclaving, it is guaranteed for over 400 cycles. Available in 5 colours. Ask us for more information. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 34 of 42 STAINLESS STEEL INSTRUMENT BASKETS Description: Belintra sterisystem instrument baskets have been manufactured from highly polished AISI 304 L grade stainless steel. The ‘dry bottom’ of the instrument baskets ensures good evacuation of condensing liquids. The base is composed of a 5.8mm square welded mesh in 1.2mm stainless steel wire. The baskets have two handles and have a load bearing capacity of 15kg. The ultrafine punch pattern of the side panel protects fine instruments but also guarantees a good permeability during the sterilization process. The staggered perforation pattern features 2mm holes that guarantee a permeability of more than 50%. Steam and during the washing process water can readily penetrate ensuring an optimum result. The upper wire has been welded on to the sides of the basket. This results in a beautifully finished product that is devoid of any sharp edges and dispenses with the risk of perforations during unpacking. The upper wire also ensures that the top of the basket cannot become contaminated by dirt. Belintra instrument baskets are produced according to the highest quality standards; they have been tested and certified by a qualified 3rd party. Belintra instrument baskets are ‘CE medical Class I’ approved, all baskets carry a laser marked ‘CE - label ‘and a lot number. For quality-assurance purposes, all our baskets are put through a special quality control tool. To make sure that the mesh is uniform in size, the base over every basket is meticulously checked, which is vital of course if we want to ensure that your instruments remain firmly in place. For identification and traceability purposes, the instrument baskets come with a bar code zone. Steri-ID instrument Baskets: Our instrument baskets with integrated Steri-ID are made in accordance with the same quality criteria as our standard Sterisystem instrument baskets. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 35 of 42 The integrated Steri-ID RFID tag is a high quality alternative to the traditional process with barcode stickers used to keep track of the contents of instrument baskets. Stickers are easily damaged, become illegible and as such regularly need to be removed and replaced. The embedded tag however is resistant to washing and sterilization conditions in the autoclave (high temperatures, steam and vacuum) as well as to the most common chemicals used in hospitals. It is therefore guaranteed that It can be used for over 400 cycles. The embedded Steri-ID tag is based on ISO 15693 technology. Thanks to this open platform you have the opportunity to make a selection among different suppliers of RFID writing and reading technologies. Steri-ID tag can be scanned through the sterilization packaging; hence no direct viewing is required to trace the contents during the entire sterilization process. Steri-ID instrument basket is available in two standard sizes (DIN 1/1 and DIN 1/2) and five different colors. Stainless Steel Instrument Baskets DIN Code 3000600005 DIN ¼ 12 x 25 x 6 cm 3000600007 DIN ½ 24 x 25 x 6 cm 3000600012 DIN 1/1 48 x 25 x 6 cm 3000600011 DIN 1/1 high 48 x 25 x 10 cm 3000500020 DIN 1/2 high 24 x 25 x 10 cm Stainless Steel Instrument Baskets EURO 3000600026 EURO ¼ 12 x 30 x 6 cm 3000600018 EURO ½ 24 x 30 x 6 cm 3000600015 EURO 1/1 48 x 30 x 6 cm 3000600004 EURO 2 11.5 x 32 x 6 cm 3000600006 EURO 2 23 x 32 x 6 cm 3000600010 EURO 2 46 x 32 x 6 cm Steri-ID Instrument Baskets DIN 1/1 Code Tag Colour 3001200018 Yellow 48 x 25 x 6 cm 3001200019 Green 48 x 25 x 6 cm 3001200020 Black 48 x 25 x 6 cm 3001200021 Blue 48 x 25 x 6 cm 3001200022 White 48 x 25 x 6 cm Steri-ID Instrument Baskets EURO 3001200013 Yellow 24 x 25 x 6 cm 3001200014 Green 24 x 25 x 6 cm 3001200015 Black 24 x 25 x 6 cm 3001200016 Blue 24 x 25 x 6 cm 3001200017 White 24 x 25 x 6 cm Name Berta Bella Betty Belinda Brigitte Bally Babedo Brenda Bambi Barbie Beatrice Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty ea ea ea ea ea ea ea ea ea ea ea Ctn Qty ea ea ea ea ea ea ea ea ea ea 36 of 42 FINE MESH, STAINLESS STEEL INSTRUMENT BASKETS with lid Description: These fine-meshed baskets are fitted with a lid and feature a more dense mesh, which makes them very safe for the sterilisation of small instruments. Mesh size of bottom and lid: 3 x 3 mm. Perforated raised sides (Ø 2 mm hole size). 2-patented Teflon locks on lid; user-friendly and ergonomic. The baskets are made to the highest quality standards. The baskets are entirely free of welding burrs, openings and distortion of wires or weld discolouration. Fine Mesh Stainless Steel Instrument Baskets with Lid Code Description 3000700001 Instrument basket with lid 12 x 25 x 4 cm 3000700002 Instrument basket with lid 24 x 25 x 4 cm 3000700003 Instrument basket with lid 48 x 25 x 4 cm Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty ea ea ea 37 of 42 HEIGHT ADJUSTABLE TABLES Description: Each worktop is electrically height adjustable. The adjustment control with memory function allows you to store three different positions. This is very convenient when several people use the same workstation. The height is continuously adjustable between 800 and 1300mm. The table is fitted with two robust lifting pillars in anodised aluminium. Each column can sustain a weight of 150kg. In case of overload, the lifting pillars block automatically. The feet of the table are stainless steel and have levelling adjusters. The worktop is made from hygienic, water-resistant Hexpl plate, fitted with a scratch-proof HPL layer or brushed stainless steel. All materials are corrosion-resistant, resistant to the common cleaning and disinfection products as well as UV and heat. The table can be fitted with a wide range of additional features including 3 drawer unit, mains current, UTP, compressed air, a pc-arm and an upper structure. Please call us if you have any queries. Height Adjustable Tables with Stainless Steel Worktop Code Description W x D 17005 00086 Worktop 1800 x 800 mm 17005 00088 Worktop 1800 x 1000 mm 17005 00090 Worktop 2000 x 800 mm 17005 00093 Worktop 2000 x 1000 mm Ctn Qty ea ea ea ea Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 38 of 42 RENO PLASMA STERILIZERS Description/Application: Renosem Plasma Sterilizers incorporate new plasma technology developed by the Reno engineers to create an extremely penetrating and effective sterilizing cycle. Combining Radical plasma using DBD (dielectric barrier discharge) plasma technology maximizing H2O2 radical effect and sterilization efficacy and Abatement Plasma which breaks down the H2O2 gas into water vapour and Oxygen Reno Plasma Sterilizers have the user friendly interface of a wide coloured touch screen that display functional and cycle information. The chamber is rectangular providing a usable volume of more than 90%, made of solid acid proof stainless steel, it is easy to clean. Ready to use, single use sterilant cassette, reliable quantitive injection system ensures the correct dose is dispensed into the chamber. There are no drain bottles to empty or maintain as the small amount of residue left from the cycle is released via a rear vent as water vapour and oxygen. Environmentally friendly. The thermal printer provides complete cycle information. The units are just plug in, no complicated installation, plumbing or venting. Cycle time is rapid averaging around 50 minutes and with the low temperature operation, applicable to heat sensitive and fine instruments. Narrower internal diameter and longer hollow devices can be processed in the RENO plasma sterilization system. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 39 of 42 Standard 40 to 50 minutes cycle time for most instruments such as, Single-Channel Polyethylene & Teflon flexible (internal diameter > 1Ø and length < 12,000mm) or rigid endoscopes (internal diameter > 1Ø and length < 1,000mm). Flexible Single-through Lumen (one-side blocked): more than 2mm (ID) x less than 1,500mm (Length). ARTG No. 177578 Code TBA TBA TBA 440002 440003 440004 440005 440006 440007 Description Reno Plasma Sterilizer S20 Single Chamber Compact Model Reno Plasma Sterilizer S130 Single Chamber Reno Plasma Sterilizer S130D Single Chamber, Double Door Pass Through Hydrogen Peroxide Plasma Sterilant Cassette ARTG No. 221385 Plasma Sterilization Chemical Indicator Strip Plasma Sterilization Biological Indicator Biological Indicator Incubator Basket Stainless steel for Reno Series Sterilizers Thermal Printer Paper for Reno Series Sterilizers Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 Ctn Qty 1 1 1 20 x 2 250 30 1 2 5 40 of 42 Med-Con Pty. Ltd. Standard Terms And Conditions Of Sale 1. 2. Terms Apply To All Contracts These terms and conditions apply to and form part of any contract arising from the Customers acceptance of the Company’s offer and any contract arising from repeat of further orders for the same or similar goods whether given orally or otherwise. Offers (a) (b) (c) (d) (e) (f) (g) Unless otherwise agreed in writing, all prices are; Open for acceptance for a period of thirty (30) days only. F.O.B. Med-Con Pty. Ltd. Warehouse. Med-Con reserve the right to alter prices without notice. Exclusive of any costs attributable to any special delivery required by the Customer and those costs are recoverable from the Customer. Based on current labour and material costs, and any variation to those costs or to specification are recoverable from the Customer. Calculated on the basis of all goods ordered being delivered in one shipment. Net of Sales Tax 3. Acceptance The placing of an order with the Company is a full acceptance of these Terms And Conditions and any terms and conditions sought to be introduced by the Customer’s order will be disregarded and form no part of the contract. 4. Delivery (a) The Company will use its best endeavours to deliver or arrange for delivery of the goods to the Customer at the agreed price and time of delivery but no liability will attach to the Company if the goods are not delivered within that period. (b) The Company reserves the right to alter the agreed date by notice prior to the due date of the delivery given to the Customer where it is in the Company’s view impractical to deliver or arrange for delivery of the goods to the Customer on the specified date. (c) Any goods not taken within the period specified in paragraph (a) or on such other date as has been specified to the Customer goods are to be paid for in full within thirty (30) days from that date unless otherwise agreed in writing and any delivery or other costs incurred by the Company in connection with such goods are recoverable from the Customer. Such goods remaining in the Company’s stores under these circumstances will be at the Customer’s risk and subject to a storage charge at the option of the Company. (d) The Company reserves the right to supply by instalments. Each instalment is deemed to be sold under a separate contract and will be invoiced for payment upon the Company’s usual terms as set out in clause 7. Failure of any one delivery shall not invalidate the contract as to the other deliveries. 5. Liability - Suitability Of Goods (a) Subject to paragraph (c), no warranty is given by the Company or responsibility accepted by it that the goods sold comply with the requirements of any legislation relating to the making and/or labelling and/or packaging of goods. Compliance with the requirements of such legislation is the sole responsibility of the Customer and the Customer must indemnify the Company against all losses, claims and expenses of whatsoever nature arising from any action or proceeding of any kind resulting from non compliance. (b) Subject to paragraph (c), no condition or warranty that work done or goods supplied are or is suitable in size, shape, capacity, quality or otherwise for the Customers purpose is contained in, given by or to be implied in this contract. (c) The Customer has the benefit of the conditions and warranties implied by statute which cannot be lawfully be excluded, restricted or modified. (d) Subject to any statutory provision to the contrary, any liability of the Company to the Customer in relation to any breach of a condition or warranty referred to in paragraph (c) is limited to replacement of the goods or supply of the goods, or at the option of the Company, payment of an amount equal to the cost of replacing the goods or of acquiring equivalent goods (whichever is the lowest amount) 6. Carriers (a) Title to and risk in respect of goods delivered to a carrier for carriage to the Customer passes to the Customer when the goods are handed over or made available to the carrier agreed between the Company and the Customer. (b) The Company will use its best endeavours to notify the Customer within 24 hours of goods having been handed over or made available to a carrier but no liability will attach to the Company if notice is not given within that period, nor will failure to give notice within that period excuse the Customer from any of the obligations under this contract. (c) If there is no agreement between the Company and the Customer as to who the carrier is to be, or if the Company is otherwise to select the carrier, the Company may select any carrier as in its absolute discretion it sees fit to engage such carrier on such terms as the Company in its absolute discretion sees fit. 7. Terms (a) Subject to paragraph (b), goods will be paid for at the time of placing an order. (b) Where : (i) the Company has approved an application for commercial credit from the Customer or has otherwise agreed in writing (and that approval has not been revoked or withdrawn), and (ii) The cost of goods ordered by the Customer, plus the cost of any goods previously ordered by the Customer for which payment is outstanding, does not exceed the credit limit approved for the Customer, goods will be paid for at or before the end of the month following the month of invoice. (c) The Company may charge on overdue balances outstanding at its current bank overdraft rate plus one and one-half per cent (1 ½%) as a handling fee. (d) If payment is not received by the Company on or before the due date, the Customer will be liable for all costs incurred in recovery, including all debt collection agency fees and solicitor’s costs. 8. Default of Customer If agreement for the purposes of clause 7 (a) is not granted or is revoked or withdrawn by the Company, or the Customer Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 41 of 42 defaults in payment or commits an act of bankruptcy or, being an incorporated company, passes a resolution for winding up (except for the purposes of reconstruction) or a court makes an order to that effect, the Company reserves the right to cancel the order (so far as it remains unperformed) in all or in part, without liability on the part of the Company and all monies owing to the Company under the contract will be immediately payable. 9. Claims / Returns Any claims must be made in writing within fourteen (14) days of receipt of the goods by the Customer, except claims as to nondelivery which must be made in writing within twenty-eight (28) days of dispatch of the goods, and any claims not made within that period shall be deemed to be waived. All returns are subject to written Authorization from Med-Con Pty. Ltd. prior to return of goods. A 20% Re-Stocking Fee may apply to returned goods. 10. Variation or Waivers These terms and condition shall govern any contract unless expressly waived or varied in writing by the Company, but so as not to release the Customer from any obligation herein. 11. Force Majeure Every effort will be made to carry out every contract but the due performance of a contract is subject to variations or cancellation owing to an Act of God, internal disturbances, war, strikes, lockouts, fire, flood, riot, theft, force Majeure or any other causes beyond the Company’s control or owing to inability to procure materials or articles except at increased prices due to any of the above, but the Customer will remain liable for payment for work done to the date of cancellation. 12. Patents and Designs (a) In consideration of the Company accepting an order from the Customer, the Customer warrants and assures that no patent, copyright, trademark, design or any other right, or any legislation, is or will be infringed by reason of the Company accepting or carrying out the order and the Customer agrees to indemnify the Company against all losses, costs and expenses of whatsoever nature suffered or incurred by the Company in connection with any claim, action or proceeding by a third party. (b) The Customer acknowledges that all technical information, advice, know how, drawings, designs and samples (“the information”) submitted to the Customer are the confidential and proprietary information of the Company. (c) The Customer will keep the information secret and confidential and will not disclose it or any part thereof to any party without the express authority of the Company. This obligation of confidence does not apply to any part of the information which forms part of the public domain or enters the public domain other than by reason of default on the part of the Customer. (d) The Customer will not reproduce any part of the information in any form without the express authority of the Company. 13. Experimental Orders Preliminary work and/or work produced in an experimental way at a Customer’s request will be considered an order and may be charged to the Customer. 14. Sales Tax (a) Unless the Customer furnishes to the Company a Quotation of Certificate or an Exemption Certificate, the Company will charge to and collect from the Customer the amount of any sales tax payable in respect of the goods. (b) The Customer warrants that any Quotation of Certificate or Exemption Certificate furnished to the Company is properly and lawfully furnished and that any information contained therein is true and correct in all respects and if, without knowledge or fault on the part of the Company, a Quotation of Certificate or Exemption Certificate is improperly or unlawfully furnished or information contained therein is not true and correct, the Customer agrees to indemnify the Company against all liabilities, penalties, costs and expenses of whatsoever nature suffered or incurred by the Company as a result thereof. 15. Alleged Disputes In the event of any charges alleged to be in dispute the Customer will pay for all charges appearing on the statement of account pending an investigation of the charge or charges so disputed. 16. Governing Law This contract is governed by and will be construed in accordance with the laws of the State in which is situated the office of the Company to which the order is addressed and the Customer and the Company hereby submit to the jurisdiction of the courts of the State and all courts competent to hear from those courts. Med-Con Solutions for Bio-security For Orders – PH 03 9753 2710 or FAX 03 9753 2722 42 of 42
