eriX.advanced

eriX.advanced
Communications Management for
Command & Control centres and Mobile Command vehicles
Seamless
integration
eriX.advanced is a scalable system for misson critical communications. It integrates services
like telephony-, radio-, and intercom despatching, alerting as well as facility control and resource
management for public safety vehicles and responders. The emergency processes can be distributed to any number of workstations. Each of them can consist of up to 8 channels of voice
recording and documentation. In addition, all key processes are automatically logged.
The individual eriX.advanced workstations can be linked together other and to other subsystems via LAN and there are interfaces to command & control systems.
Key features
•• Simple operation (universal touch user interface)
•• Connection of analogue radio devices
•• Connection of Motorola, Sepura and other TETRA radio devices
•• Analogue and digital alerting
•• Telephony via VoIP/SIP
•• Integrated voice documentation up to eight channels per workstation
•• Full integration of building management (including EIB/KNX) via LAN
•• Installation on any Windows 7/8 operating system
•• Innovative, fault tolerant system (FTS) architecture, no server needed
Touchscreen
Audio-Interface
LAN
TETRA BOS
radio devices
POCSAG
receivers
Analogue
radio devices
www.swissphone.com
GSM / SMS
Building
automation
FMS / SDS
Voice
documentation
Digital
alerting
Analogue
alerting
Dispatch system
interface
EN 04.2014 psB26 v2 BIK
Simple operation
The eriX.advanced software is developed to ensure quick and simple operation for the user. This
way, users do not need to undergo extensive, complicated training. At the same time, the simple
operating concept increases the level of operator acceptance.
Top voice quality
eriX.advanced offers a high level of voice quality thanks to a newly developed audio interface
(AIF) unit. All analogue signals are digitalised and handled by using a digital signal processor. This
way, it is possible to simply and flexibly route all audio paths to any of the four built in speaker
amplifiers and other communications devices.
Telephony
eriX.advanced uses Voice over IP (VoIP) for telephony, but still providing analogue und digital
(e.g. ISDN) ports. As a result, there are no limitations to the telephone system. All telephone data
can be transmitted compatibly thanks to the global standard SIP protocol. It is also possible
to connect door/intercom systems via this protocol. eriX.advanced also features a convenient
telephone book with a time-saving participant search function.
Radio or PA
eriX.advanced can control and simultaneously listen to up to 16 radio- or public address (PA)
channels. The radio devices are connected to the system unit (SM1) via audio- and data interface
using specific or standard protocols (e.g. PEI).
Status monitor
eriX.advanced integrates a flexible status monitor software (e.g. FMS) to track and monitor up
to several hundred operating resources including a history and printing function. It is possible to
automatically or manually capture and display the status of resources such as vehicles or personnel.
Alerting
eriX.advanced enables analogue and digital alerting in accordance with the POCSAG standard. It is possible to trigger pagers, sirens and vehicle based radio communication systems (like
FDM.X) with both alerting methods. The emergency services can be alerted with just a few clicks.
IDEA encryption can be integrated into the digital alarm in order to protect against unauthorised
access.
Building automation
eriX.advanced provides high modularity in building automation thanks to various different plugin units. It does not matter whether conventional relay technology or networking via EIB/KNX
Instabus is used. An important feature is that building automation is connected by LAN, allowing
every workstation and distributed Touchpanels to control the hardware.
Interfaces
eriX.advanced consists of several data interfaces, among these is the XML-based Command
& Control (C&C) interface. This way, these systems can exchange communication and status information, five-tone, POCSAG and telephony data with eriX.advanced. The «FMS 32» interface
allows you to link additional software programs.
I.SEARCH
As an option, the I.SEARCH paging and information system can be connected to eriX.advanced
for local notification and alerting. The digital POCSAG standard makes it possible to transmit predefined texts to digital pagers or send any texts to the pagers via email input.
Swissphone Wireless AG
Fälmisstrasse 21
CH-8833 Samstagern
Tel: +41 44 786 77 70
Fax:+41 44 786 77 71
info@swissphone.com
www.swissphone.com
Swissphone
Telecommunications GmbH
Industriestr. 51
D-79194 Gundelfingen
Tel: +49 761 59 05 0
Fax:+49 761 59 05 100
vertrieb@swissphone.de
www.swissphone.de
Swissphone Austria GmbH
Dresdnerstr. 68
A-1200 Wien
Tel: +43 1 493 13 41
Fax:+43 1 493 13 41 17
office@swissphone.at
www.swissphone.at