Call for papers
Transcription
Call for papers
The International Conference Management of Technology – Step to Sustainable Production (MOTSP 2015) will take place from 10–12 June, 2015 in Brela (near Makarska) Croatia, as a joint project organized by the Croatian Association for PLM and the Croatian Ergonomic Society. University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture University of North, Koprivnica, Croatia with support of University of Primorska, Faculty of Management, Koper University of Zagreb, Faculty of Graphic Arts University of Skopje, Faculty of Mechanical Engineering University of Maribor, Faculty for Mechanical Engineering Politecnico di Torino Institute for Innovation and Development of University of Ljubljana are organizing th 7 International Scientific Conference Management of Technology Step to Sustainable Production MOTSP2015 SECOND CALL June 10-12, 2015 Brela, Makarska, Croatia According to the Scientific Committee recommendations and special accordance between MOTSP 2015 and journals Technical Gazette (the issue will be published at the beginning of the year 2016), Transaction of FAMENA and International Journal of Industrial Engineering, PLM and Sustainable Production the authors of the selected papers will be invited to extend their papers for publication in the mentioned journals. Organisation • Faculty of Mechanical Engineering and Naval Architecture University of Zagreb Ivana Lučića 5, 10000 Zagreb, Croatia Phone: +385 1 6168 340 Fax: +385 1 6157 123 • University of North Trg Žarka Dolinara 1, 48 000 Koprivnica, Croatia • Croatian Association for PLM Ivana Lučića 1, 10000 Zagreb, Croatia • Croatian Ergonomics Society Ivana Lučića 5, 10000 Zagreb, Croatia SCIENTIFIC COMMITTE Barić G. (Croatia) Jerbić B. (Croatia) Bachman B. (USA) Kladarić I. (Croatia) Bouras A. (France) Kondić Ž. (Croatia) Božič S. (Slovenia) Krajnik P. (Sweden) Canen A.G. (Brazil) Kunica Z. (Croatia) Ćosić P. (Croatia) Majetić D. (Croatia) Dolinšek S. (Slovenia) Menipaz E. (Israel) Đukić G. (Croatia) Milčić D. (Croatia) Gečevska V. (Macedonia) Milković M. (Croatia) Guenther H.O. (Germany) Opalić M. (Croatia) Guzović Z. (Croatia) Ozturk, A (China) Hršak D. (Croatia) Petković D. (BiH) Ikonić M. (Croatia) Poppeova V. (Slovakia) Raos P. (Croatia) Renko S. (Croatia) Savescu D. (Romania) Sawik T. (Poland) Sušić A. (Croatia) Sihn W. (Austria) Šercer M. (Croatia) Štefanić N. (Croatia) Štorga M. (Croatia) Tropša V. (Croatia) Wang E.M.Y. (Taiwan) Wang Y.C. (Taiwan) ORGANIZING COMMITTEE Predrag Ćosić (Chairman) Goran Đukić Gordana Barić Aleksandar Sušić Tihomir Opetuk SPONSORING ORGANIZATIONS • Ministry of Science, Education and Sports, Croatia • University of North, Trg Žarka Dolinara 1, 48 000 Koprivnica, Croatia • Fund for Environment Protection and Energy Efficiency, Croatia • Croatian Employment Service, Croatia PARTNER ORGANISATIONS • Center for Virtual Production, Faculty of Mechanical Engineering, Kragujevac, Serbia • Institute for Innovation and Development of University of Ljubljana, Slovenia MAIN TOPICS • Management of Technology • Production, Operation Management • Strategic, Engineering Management • Industrial Engineering –– Operational Research –– Logistics –– Production Economics –– Decision and Risk Analysis –– Manufacturing Costs –– Supply Chain Management, Total Quality Management –– Forecasting, Technology Foresight –– Business Intelligence –– Maintenance, etc • Ergonomics –– Aesthetic Ergonomics –– Applied Ergonomics –– Cognitive Ergonomics –– Design and Product Ergonomics –– Ergonomic Database, Knowledge and Considerations –– Industrial Ergonomics, etc. • Rapid Prototyping and Manufacturing • Computer Integrated Manufacturing CAD, CAM, CAPP, CAQ • Robotics and Mechatronics • Sustainable Production –– Product Lifecycle Management (PLM) –– Green Production (BAT) –– Clean Production –– Eco Design –– LCM (Life Cycle Management) & Decision Supports –– LCA (Life Cycle Assessment) –– LCI (Life Cycle Inventory) –– LCIA (Life Cycle Impact Assessment) –– Extended Products –– SLCA (Social Life Cycle Assessment) –– Renewable Sources of Energy –– Energy Efficiency and Audit –– Eco Labeling –– Recycling –– Reverse Logistics • Artificial Intelligence • Total Cost Assessment • Financial Sustainability • Social Responsibility et all. GENERAL INFORMATION Deadline for abstract submission: • January 30th, 2015 Submission of paper titles and abstracts (up to 100 words) using abstract submission form at www.motsp2015.org Notification of acceptance of abstracts: • January 30th, 2015 Final submission of full papers: • April 15th, 2015 Notification of acceptance of full papers: • May 15th, 2015 CORRESPONDENCE ADDRESS CaPLM – Croatian Association for PLM Ivana Lučića 1, 10 000 Zagreb, Croatia • Chairman: Prof. Predrag Ćosić, PhD, FMENA, Department of Industrial Engineering • Secretary: Gordana Barić, M.Sc., FMENA, Department of Industrial Engineering Ass. Prof. Goran Đukić, PhD, FMENA, Department of Industrial Engineering Prof. Aleksandar Sušić, PhD, FMENA, Croatian Ergonomics Society E-mail: motsp2015@fsb.hr Url: www.motsp2015.org THE MOTSP 2015 CONFERENCE AWARDS 1. Award For the best paper in the young researchers category 2.The best paper presentation award 3.The MOTSP 2015 best paper award THE MOTSP 2015 SPECIAL AWARD The first five participants paying the conference fee will be awarded with a surprise excursion. INFORMATION FOR PARTICIPANTS Conference Venue Bluesun hotel Soline ***, Brela Trg Gospe od Karmela 1, 21322 Brela, Croatia Url: www.hotelsolinebrela.com Registration Bluesun hotel Soline Registration should be acknowledged at the reception desk on: • June 9th, 2015 18:00 - 20:00 Welcome drink • June 10th, 2015 08:00 - 09:00 Payment • Early conference fee until May 20th 2015: EUR 260 • Late conference fee after May 20th and before May 25th 2015: EUR 310 Presentation Presentations should take 15 minutes. Authors will have the possibility of using all necessary equipment for the presentations (Power Point). All the accepted papers will be published in the Conference Proceedings to be distributed during the Conference. According to the Scientific Committee recommendations, the authors of the selected papers will be invited to extend their papers for publication in the following journals (some of them are included in databases CC, SCI, SCI – Expanded): • Metallurgy, Journal for Theory and Practice in Metallurgy • Transaction of FAMENA • Technical Gazette • International Journal of Industrial Engineering, PLM and Sustainable Production • Advances in Production Engineering and Management • Journal of Mechanical Engineering • UP FM – Management • UP FM – Management Global Transition • Polimeri • Flexible Services and Manufacturing Journal • Journal of Intelligent Manufacturing • International Journal of Product Lifecycle Management • Annals of Faculty Engineering Hunedoara – International Journal of Engineering • International Journal of Transitions and Innovation Systems • Acta Mechanica Slovaca – The Technical University of Košice Conference language: English Mostly of presented papers would be nominated for publication in one of the journals which are mentioned in this call. Arriving Arriving by plane: Airport ”Resnik’’, Split Alternative airport: Zagreb, Dubrovnik Accomodation reservation in Brela, Bluesun hotel Soline, conference dinner and excursion Participants and accompany persons of MOTSP 2015 have a special offer from Bluesun hotel Soline and reservation. For information, please contact before May 20th, 2015, only: Tourist agency, Sunce Global d.o.o., Trpinjska 9, 10 000 Zagreb, Croatia Miss Natalija Đukanović or Miss Edita Galić Url: www.bluesunhotels.com E-mail: natalija.dj@bluesunhotels.com T +385 91 2862 200 Accomodation Single room (half board): 85 EUR per person (all taxis are included in price) Double room (half board): 65 EUR per person (all taxis are included in price) Gala dinner and excursion • Conference dinner: June 11th 2015: 60 EUR, • Excursion – Dubrovnik: June 12th 2015: 60 EUR.