Corporate Brochure

A Complete
NDT Company
Products | Inspection Services | In-house Manufacturing | Training & Certification
About Us
We are a focused company dealing into Non Destructive Testing. Our activities
include:
Ÿ Sales & Distribution of NDT Products
Ÿ Providing On-site Inspection Services
Ÿ Manufacturing of NDT Accessories
Ÿ Training & Certification
Ÿ Level III Consulting Services
At NDTS India, we constantly endeavour to fulfil our customers varied testing
needs and are deeply committed towards surpassing their expectations. We
value & cherish their valuable suggestions & assistance in identifying important
trends from time to time.
By virtue of our focus, core competencies, a committed team of professionals
and our unrelenting quest for excellence, we are fully geared to meet future
challenges.
Products
We represent many world-renowned companies and look after the marketing & distribution of their products in India. We also
support our customers with effective after sales service, technique related training and application analysis.
We cater to a wide spectrum of industries ranging from manufacturing, heavy engineering, nuclear, aviation, research &
development, refineries, petrochemicals, power stations etc.
Ultrasonic
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Thickness Gauges
Flaw Detectors
TOFD & Phased Array Equipments
Scanners
Air-Coupled Ultrasonic System
Pulser Receivers
Immersion Scanners
Portable C-Scan System
Blockage Detector
In-line Systems
Probes, Cables & Calibration Blocks
EMAT
Ÿ Portable Instruments
Ÿ Standard Sensors & Accessories
Ÿ Integrated Solutions
Eddy Current
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Conductivity Meter
Portable Flaw Detector
Probes, Cables & Calibration Blocks
Wheel Scan System
Surface & Tube Inspection Solutions
Offline & online systems for Tube, Bar
and wire
X-Ray
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Portable & Stationary X-Ray Machine
Direct Radiography (DR) Systems
Computed Radiography (CR) Systems
Laser Film Digitizer
Radiographic Accessories
Remote Visual Inspection
Ÿ
Ÿ
Ÿ
Ÿ
Videoscopes
Pipe & Tank Inspection Camera
Retrival Tools
Push Rod & Crawler Systems
Other Solutions
Thermography Cameras
Portable Harness Testers
Roll Hardness Testers
Ferrite Meter
NDE Education & Flaw Kits
Wire Rope Testers
MFL Scanners for Pipes & Tank Floor
ACFM
Simulation Software-CIVA
Servo Inclinometers
Laser Based Profile Measurement
Systems
Ÿ NDT Training Software
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Inspection Services 24X7
We provide 24X7 On-site Inspection Services and in order to understand better we have divided these services into two
categories i.e. Advance Services & Conventional Services. We deploy world-class equipment's with trained manpower as per
various affiliations (like ASNT, ISNT, BS-EN-ISO etc.) & customer requirements. Our team comprises of ASNT Level III's, Advanced
NDT Inspection Engineers & NDT Technician's.
Our strength's lies in through knowledge and experience. Our collective experience of 70 years comes in handy when we are
posed with unique challenges of providing our clients innovative solutions on NDT Inspection. By virtue or which our customers
consider us the most reliable NDT Inspection Service Provider.
The industries we have served range from Oil and Gas, Refineries, Petrochemicals, Engineering, Manufacturing and many more…
Advanced Services
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ultrasonic Phased Array
Time of Flight Diffraction (TOFD)
Corrosion Mapping
Remote Visual Inspection/Boroscopy
Thickness Mapping of Boiler Tubes with EMAT
High Temperature Thickness Gauging with EMAT
Eddy Current Testing
Remote Field Eddy Current Testing
Eddy Current Array
IRIS – Internal Rotary Inspection System
Infrared Thermography
Positive Material Identification
Wire Rope Testing
Conventional Services
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ultrasonic Flaw Detection
Ultrasonic Thickness Gauging
Magnetic Particle Inspection
Liquid Penetrant Testing
On-Site Hardness Testing
Coating Thickness Measurement
Training & Certification
We provide Level I & Level II training & certification as per IS: 13805/SNT-TC-1A/BS-EN-ISO in following streams
Ÿ Familiarization - Phased Array & TOFD
Ÿ Phased Array - Level II (as per SNT-TC-1A)
Ÿ TOFD - Level II (as per SNT-TC-1A)
Ÿ Ultrasonic Testing - Level II (as per SNT-TC-1A)
Ÿ Eddy Current Testing-Level II (as per SNT-TC-1A)
Our courses are based heavily on practical exercises, which
when combined with the recoding, reporting & answering of
quizzes, results in the understanding of a specific syllabus
segment. Upfront lecturing is reduced to a minimum and the
emphasis is on training to the precise, specific need of the
individual.
NDT Level III Consulting Services
We provide you with our fullest support and necessary information to complete your assignment through our certified and well
experienced Level III persons, within a specified time period.
Ÿ To help you in selecting the right non destructive
testing method/s and techniques suitable for the
application
Ÿ Selection of suitable equipment for specific purpose.
Ÿ Preparation of NDT inspection procedures for various
inspection methods, clients and jobs.
Ÿ Preparation of Test report formats and NDE technique
sheets.
Ÿ Preparation of written practices as per ASNT
recommended practice SNT-TC-1A / CP 189.
Ÿ Preparation of advanced NDT technique procedures
for Immersion Ultrasonic testing, Phased Array
Ultrasonic Testing, Time of Light Diffraction, Magnetic
flux leakage.
Ÿ Validation of Procedures.
Ÿ Review of all inspection procedures.
In-house Manufacturing
In order to focus on this activity, we have floated a new company named as Arora Technologies (P) Limited (ATPL) which
undertakes the following activity:
Ÿ Manufacturing of ultrasonic accessories like general purpose probes, cables, and calibration blocks
Ÿ Manufacturing of Radiography Accessories like Film illuminators, Pentrameters, IQI's, Warning lights & tapes, Hangers &
processing tanks, Flexible & rigid cassettes, Colimeters, CV tonges, lead number & letter etc.
Ÿ System Integration
Ÿ Specialized Manufacturing like Inspection Head's for the In-Service Inspection of Fuel Channels of PHWR, Drive tubes & field
cables etc.
“A customer is the most important visitor on our premises; he is not
dependent on us. We are dependent on him. He is not an interruption in
our work. He is the purpose of it. He is not an outsider in our business.
He is part of it. We are not doing him a favor by serving him. He is doing
us a favor by giving us an opportunity to do so.”
-Mahatma Gandhi
NDTS India (P) Limited
619 & 620 The Great Eastern Galleria, Plot No.20, Sector 4, Nerul, Navi Mumbai 400 706
T: +91-22 6138 0600, 2770 3913, 2770 3923, 2772 9077 F: +91-22 2770 3903 | E: info@ndts.co.in | W: www.ndts.co.in