Fuel Prep Safety 1st Brochure
Transcription
Fuel Prep Safety 1st Brochure
Spill on Clothing If Fuel Prep™ Biocide comes in contact with your skin during use, immediately remove all contaminated clothing and wash exposed skin areas with soap and water. See Product Material Safety Data Sheet (MSDS) SECTION 4, First Aid Measures, for further information. Product Stewardship The Penray Companies, Inc. is committed to the safe use of all of its products. Fuel Prep™ Biocide These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Neutralization & Spill Clean-up See Material Safety Data Sheet (MSDS) Section 6 “Accidental Release Measures” and the “SPILL DEACTIVATION PROCEDURE - Instructions for Cleanup of Spills” brochure for instructions on clean-up of spills. For additional information please contact The Penray Companies, Inc at (800) 373-6729. For Additional Information: The Penray Companies, Inc. Wheeling, IL 60090 (800) 373-6729 Website: www.penray.com Printed in USA November 2014 Safety First Fu e l P re p™ B i o c i d e - Safety First Whatever the activity, safety always has the highest priority at The Penray Companies, Inc. In addition to the safety of our own employees, we are equally concerned with product safety and the safe handling of our products by our customers. Fuel Prep™ Biocide is registered with the United States Environmental Protection Agency (USEPA) EPA Reg. No. 65597-1-66596. When used as directed, Fuel Prep™ Biocide presents no health hazards. However the product, as supplied, can cause severe eye burns, severe skin irritation, or both and therefore requires special care when handling. Please refer to the Safety Data Sheet (SDS) for additional information. Fuel Prep™ Biocide is valuable in providing the following benefits: • Quickly kills microorganisms in contaminated fuel systems. • Prevents microbial growth and keeps fuel systems clean for extended periods of time. • Fully compatible with fuels, fuel additives and fuel system components. • Infinitely soluble in the water where the bugs live, but will move through the fuel to treat contaminated water on vertical surfaces or with the fuel to offer complete system protection downstream. HA N DL I NG C ONC E N T R AT E D F U E L P R E P ™ B I O C I D E When Fuel Prep™ Biocide is mechanically injected or manually administered into a fuel system or a tank the following protective clothing is recommended: Eye Protection: Wear chemical splash safety goggles and face shield. Eye protection worn must be compatible with respiratory protection system employed. Hand Protection: Wear impervious gloves such as Butylrubber or nitrile- rubber gloves. Gloves should be removed and replaced immediately if there is any indication of degradation or chemical breakthrough. Wash the outside of gloves before removing and disposing of gloves. Note: Material is a possible skin sensitizer. Skin & Body Protection: Mixers, loaders, applicators, and other handlers exposed to this product must wear: long-sleeved shirt and long pants; socks and shoes; and a chemical resistant apron. Respiratory Protection: Typical use of this material does not result in workplace exposures that exceed the exposure limits listed in the Exposure Limit Information Section. Industrial & Personal Hygiene: Users of Fuel Prep™ Biocide should practice good industrial and personal hygiene. After handling Fuel Prep™ Biocide you should always wash your hands thoroughly, especially before eating, drinking, smoking, or applying cosmetics. Additional Protective Measures: Ensure that eyewash stations and safety showers are close to the workstation location. CONTACT WITH CONCENTRATED FUEL PREP ™ BIOCIDE & FIRST AID Fuel Prep™ Biocide does not present any human health hazards in fuel when used as directed. However, the full-strength product presents two potential hazards: severe skin irritation and severe eye burns. Therefore, the following First Aid procedures are recommended when exposure occurs: IF SWALLOWED: If swallowed, DO NOT induce vomiting. If the victim is alert have him rinse their mouth with water. Never give anything by mouth to a person who is unconscious or drowsy. Seek immediate medical attention. IF ON SKIN (Hair): In case of contact with skin, immediately remove contaminated clothing and flush affected areas with soap and water for at least 15-20 minutes. Seek immediate medical attention. Launder contaminated clothing before reuse. Discard contaminated clothing that cannot be decontaminated, such as leather shoes and belts. IF INHALED: Move to fresh air. Get medical attention, if irritation or other symptoms develop and persist. If breathing is difficult, have qualified person administer oxygen and seek immediate medical attention. If breathing has stopped, administer artificial respiration and seek immediate medical attention. IF IN EYES: In case of eye contact, flush eyes immediately with plenty of water for at least 15-20 minutes. Remove contact lenses, if present and easy to do after the first 5 minutes. Continue rinsing. Seek immediate medical attention.