PernixData FVP Adds Velocity to Veeam Backup Service for Zitcom
Transcription
PernixData FVP Adds Velocity to Veeam Backup Service for Zitcom
CASE STUDY PernixData FVP Adds Velocity to Veeam Backup Service for Zitcom Zitcom A/S is a cloud and managed hosting provider in the Nordic region, providing customized and business-specific cloud solutions based on individual companies’ needs and requirements. Stefan Rosenlund is a co-founder of Zitcom and responsible for their hosting business. They had performance issues with their Veeam storage backend based on: INDUSTRY: Service Provider RESULTS: •Backup window reduced by over 200% • Dell MD3200i storage arrays and MD1200 disk shelves with 120 TB storage •Latency reduction from over 200 ms to < 14 ms • Dell PowerEdge R510 servers, each with two Intel S3500 480 GB SSDs • 4 TB datastore bandwidth saved daily As part of their cloud-based offerings, Zitcom provides customers with Veeam managed • Over 1 billion I/Os saved in under 70 days service backups. “We needed to build a cost-effective backend storage system for Veeam. While we had the arrays with plenty of capacity, we needed them to perform better as they could no longer keep up with the amount of data being processed at peak periods. We were experiencing high write latency and even higher read latency, resulting in our daily backups taking more than 24 hours. Therefore, we needed a solution to take care of all the writes. By implementing PernixData FVP as a “middle layer’, all the writes are taken out of the equation, in turn, freeing up resources on the backend to take care of the reads. “This illustrates the perfect use case to mitigate IOPs on a VM image backup platform utilizing low cost backend storage that provides us profitability and outstanding performance for our customers.” The introduction of FVP into Zitcom’s environment has reduced the Veeam backup window by 200% and reduced latency to less than 14 ms. “[PernixData FVP software] provides us profitability and outstanding performance for our customers.” Performance Realtime VM IOPS (Sum) 467 VM Throughput (Sum) 82398 KBps VM Latency (Avg) 13.48 ms “It was way cheaper to buy FVP to add write capacity than it was to buy additional shelves of cheap storage.” Historical (Since Oct 27, 2014 6:45:37 PM) IOs Saved from Datastore 1,113,782,675 Datastore Bandwidth Saved 300.02 TB Writes Accelerated 2,003,206,941 FVP Network Savings 0 Bytes Figure 1. PernixData FVP saves Zitcom approximately 4 TB datastore bandwidth every day Figure 2. Purple: datastore latency. Blue: VM observed. Orange: local latency Implementing PernixData FVP software into their environment, Zitcom has saved a considerable amount in CAPEX, “It was way cheaper to buy FVP to add write capacity than it was to buy additional shelves of cheap storage,” concluded Mr. Rosenlund. www.pernixdata.com | 1-855-PERNIX-D | @PernixData Copyright © 2015 PernixData, Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. PernixData, , FVP, Flash Hypervisor, FVP Cluster and Flash Cluster are trademarks of PernixData, Inc. in the United States and/or other jurisdictions. All other brands, products, marks and names mentioned herein may be trademarks or service marks of, and are used to identify, products or services of their respective owners.