3D Micro Flyer

3D_Micro_2013_engl:A4 Quer Flyer
12.03.2013
18:17 Uhr
Seite 1
Angled Device for 3D Micro
The angled device enables you to
Angled device for
3D Micro,
code-no. 003661.
Dimensions:
70x79x124 mm,
weight 435 g.
mount the camera in vertical position.
It is connected using the Linhof
Quickfix I adapter for the 3D Micro.
The camera fits onto the Quickfix I at
3D Micro
an angle of 90 degrees.
The turning knobs of the segment
metal and therefore torsion free.
camera continuously and vertically for
This gives stability and reliability,
guaranteed perfect parallelism to the
even with heavy cameras. Additional
subject every time.
bracing makes working with the
The device itself is fitted with a pano-
camera vibration free.
ramic movement plate under the
The Linhof Quickfix Adapter Plates
Quickfix I. The tilting of the camera
KB Linhof code-no. 003878 means
is guaranteed at all angles.
that it can be used with 35 mm SLR
The angled device is made of solid
cameras.
Linhof Technorama
617s III attached to
3D Micro with the
angled device for
precisely directed
vertical shots.
Linhof 3D Micro
with attached
angled device and
Quickfix I adapter.
Highlight-Tower, Munich. Photography: Kaj Simon
guides allow the adjustment of the
Precise vertical
photographs – in
reproductions
or for shooting at
close range.
LINHOF PRÄZISIONS - SYSTEMTECHNIK GMBH
RUPERT - MAYER - STRASSE 45 | 81379 MÜNCHEN | GERMANY
TEL. +49.89.724920 | FAX +49.89.72492250
info@linhof.de | www.linhof.de
02/2013
1887 - 2012: 125 YEARS LINHOF
MADE IN GERMANY
12.03.2013
18:17 Uhr
Seite 2
Linhof 3D Micro
All adjustments can be controlled and
The Linhof 3D Micro is a levelling
The vertical positioning of the camera
11
head developed by Linhof guaran-
can be controlled with two spirit
10
teeing extremely precise camera
levels, an important component
adjustments. It can be used for
for architectural photography and
digital and analogue photography,
product shots.
in the studio and on location.
The 3D Micro is designed to be used
Two levelling segments have been
with precision cameras, such as
mounted crosswise resulting in two
Technikas, Techno, Technorama 612
precise segment guides for tilt and
and Technorama 617 and all other
lateral levelling thus avoiding the
cameras up to 10 kg.
12
repeated with precise scales.
1
2
3
9
4
5
8
6
7
migration of the image when
pivoting.
Two rubber-coated turning knobs
The 3D Micro, code 003660, is
allow self-aligning micro movements
equipped with the Linhof Quickfix I
of 12 degrees to both sides as well
permitting a “clicclac” attachment to
as front and rear.
the camera.
Above the movement axis an addi-
Linhof 3D Micro
– now also available
with a dovetail-track
to accept the quick
change plates from
Arca, Novoflex a.s.o.
(code 003662).
tional panoramic plate has been
added to allow accurate panoramic
shots. The bottom panoramic plate
allows precise positioning of the
camera to the subject.
121 mm
The Linhof Techno and
3D Micro – a perfect team
for professional work.
Even with the most
extreme uneven terrain
– the 3D Micro is levelled
with its seamless precision
drives and brings the
camera into the required
position.
101 mm
3D_Micro_2013_engl:A4 Quer Flyer
Linhof 3D Micro
Linhof code 003660.
Dimensions with
controls:
121x104x101 mm,
weight 1010 g,
weight Quickfix I
adapter plate 64 g.
The 3D Micro, code 003662, is
available with a dovetail-track to
accept the quick change plates from
Arca, Novoflex a.s.o.
In both variants, a safe and rapid
adaptation of the camera is given.
Parts and functions
1 3/8” camera screw,
interchangeable
with 1/4” camera screw
2 integrated Quickfix I adapter
3 clamping lever Quickfix I
4 rack and pinion drive
5 lower swing and tilt segment
6 base panorama rotation
7 locking knob of panorama
rotation
8 rack and pinion drive
9 top swing and tilt segment
10 panorama rotation
11 Spirit level on Quickfix I
12 locking knob of panorama
rotation
Linhof 3D Micro
with extended swing
and tilt segments
and integrated
Linhof Quickfix I
(code 003660).
12.03.2013
18:17 Uhr
Seite 2
Linhof 3D Micro
All adjustments can be controlled and
The Linhof 3D Micro is a levelling
The vertical positioning of the camera
11
head developed by Linhof guaran-
can be controlled with two spirit
10
teeing extremely precise camera
levels, an important component
adjustments. It can be used for
for architectural photography and
digital and analogue photography,
product shots.
in the studio and on location.
The 3D Micro is designed to be used
Two levelling segments have been
with precision cameras, such as
mounted crosswise resulting in two
Technikas, Techno, Technorama 612
precise segment guides for tilt and
and Technorama 617 and all other
lateral levelling thus avoiding the
cameras up to 10 kg.
12
repeated with precise scales.
1
2
3
9
4
5
8
6
7
migration of the image when
pivoting.
Two rubber-coated turning knobs
The 3D Micro, code 003660, is
allow self-aligning micro movements
equipped with the Linhof Quickfix I
of 12 degrees to both sides as well
permitting a “clicclac” attachment to
as front and rear.
the camera.
Above the movement axis an addi-
Linhof 3D Micro
– now also available
with a dovetail-track
to accept the quick
change plates from
Arca, Novoflex a.s.o.
(code 003662).
tional panoramic plate has been
added to allow accurate panoramic
shots. The bottom panoramic plate
allows precise positioning of the
camera to the subject.
121 mm
The Linhof Techno and
3D Micro – a perfect team
for professional work.
Even with the most
extreme uneven terrain
– the 3D Micro is levelled
with its seamless precision
drives and brings the
camera into the required
position.
101 mm
3D_Micro_2013_engl:A4 Quer Flyer
Linhof 3D Micro
Linhof code 003660.
Dimensions with
controls:
121x104x101 mm,
weight 1010 g,
weight Quickfix I
adapter plate 64 g.
The 3D Micro, code 003662, is
available with a dovetail-track to
accept the quick change plates from
Arca, Novoflex a.s.o.
In both variants, a safe and rapid
adaptation of the camera is given.
Parts and functions
1 3/8” camera screw,
interchangeable
with 1/4” camera screw
2 integrated Quickfix I adapter
3 clamping lever Quickfix I
4 rack and pinion drive
5 lower swing and tilt segment
6 base panorama rotation
7 locking knob of panorama
rotation
8 rack and pinion drive
9 top swing and tilt segment
10 panorama rotation
11 Spirit level on Quickfix I
12 locking knob of panorama
rotation
Linhof 3D Micro
with extended swing
and tilt segments
and integrated
Linhof Quickfix I
(code 003660).
3D_Micro_2013_engl:A4 Quer Flyer
12.03.2013
18:17 Uhr
Seite 1
Angled Device for 3D Micro
The angled device enables you to
Angled device for
3D Micro,
code-no. 003661.
Dimensions:
70x79x124 mm,
weight 435 g.
mount the camera in vertical position.
It is connected using the Linhof
Quickfix I adapter for the 3D Micro.
The camera fits onto the Quickfix I at
3D Micro
an angle of 90 degrees.
The turning knobs of the segment
metal and therefore torsion free.
camera continuously and vertically for
This gives stability and reliability,
guaranteed perfect parallelism to the
even with heavy cameras. Additional
subject every time.
bracing makes working with the
The device itself is fitted with a pano-
camera vibration free.
ramic movement plate under the
The Linhof Quickfix Adapter Plates
Quickfix I. The tilting of the camera
KB Linhof code-no. 003878 means
is guaranteed at all angles.
that it can be used with 35 mm SLR
The angled device is made of solid
cameras.
Linhof Technorama
617s III attached to
3D Micro with the
angled device for
precisely directed
vertical shots.
Linhof 3D Micro
with attached
angled device and
Quickfix I adapter.
Highlight-Tower, Munich. Photography: Kaj Simon
guides allow the adjustment of the
Precise vertical
photographs – in
reproductions
or for shooting at
close range.
LINHOF PRÄZISIONS - SYSTEMTECHNIK GMBH
RUPERT - MAYER - STRASSE 45 | 81379 MÜNCHEN | GERMANY
TEL. +49.89.724920 | FAX +49.89.72492250
info@linhof.de | www.linhof.de
02/2013
1887 - 2012: 125 YEARS LINHOF
MADE IN GERMANY