docLine Set Submittal
download 
Report Transcription
SUBMITTAL ILS**** Refrigerant Line Set Kits for Samsung Mini Splits Job Name Purchaser Submitted to Unit Designation Location Engineer Reference Schedule # Approval Construction Construction • Copper tube cut to length finished with factory flare type connection (length noted in Table 1). • Flare nuts are provided for both lines. • Line sets shall be sealed to prevent ingress of dirt and moisture. Insulation • Factory installed on both suction and liquid lines (thickness noted in table Table 1). • Color: Black • Insulation shall be tested to the appropriate ASTM standards (details in Table 2) Wire • Both power and control wiring shall be provided. • Wiring type shall be stranded and color coded as required. • Power wiring shall be supplied in an armored conduit and conform to UL 1569 and resistant to moisture and sunlight. • Control wiring shall be shielded to protect control signal from Electro Magnetic interference. Packaging • Cardboard box, shall be marked with line set model number Table 1 - Line set dimensional details Description Item Name "Liquid" line diameter Suction diameter Length (feet) Insulation Wall Thickness ILS2506 ILS2507 ILS2509 ILS2510 ILS5006 ILS5007 ILS5009 ILS5010 1/4" 1/4" 1/4" 3/8" 1/4" 1/4" 1/4" 3/8" 3/8" 1/2" 5/8" 5/8" 3/8" 1/2" 5/8" 5/8" 25 25 25 25 50 50 50 50 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/8" Table 2 - Insulation details Insulation Physical Properties Cell structure Density (LBS/FT) Thermal conductivity Service TEMP UV weather resistance Ozone resistance Water vapor permeability Water absorption Flammability Smoke density ILS-092014A Details 4/6 LBS/FT 75° 0.257 40° F to 220° F Excellent No cracking 0.10 PERM-IN(0.15 x 10-12) 0.2 25/50 Self extinguishing Excellent www.Quietside.com 888-699-6067 Page 1 of 1 Test Method ASTM D 1667 ASTM C177 ASTM G-23 ASTM D 1171 ASTM C355 ASTM C 109 ASTM E-84 ASTM D 635
Similar documents
Willseal 600 ASTM E-84
Description willseal 600 is a precompressed, selfexpandinq polyurethone foam joint sealant that is designed to seal against rain, wind, sound, draft and dust. Unlike other conventional meth ods, willseal 600 is not susceptible to breakdowns caused by excessive joint movements, joint strain, surface contamination, aging and general tensile stress-caused failures. It does not dry out, shrink or deteriorate. There's no mixing, no masking, no staining and no mess, willseal 600 can be installed under many weather and temperatureconditions.
Material Open cell polyurethone flexible foam impregnated with a flame retardant modified acrylic. Supplied precom pressed with PSA on one side.
Tested Physical Properties illbruck willseal 600
Property Test Method Value Color Black/Grey Density ASTM D 3574 5.5-6.5 Ib/ft3l90-110kg/m3) ThermalConductivity ASTMC518 0.28 - 0.30 Btu-in/hr.=F-ft2 Thermal Resistance ASTM C 518 3.3 - 3.6 hr-^F-flVBtu Tensile Strength ASTM D 3574 21 psi min. TemperotureStability Range Short Term LongTerm -40°C/-40°F to 120°C/248°F - 40°C/-40°F to 90°C/194"F Elongation ASTM D 3574 120%+/-20% Compression Set ASTM D 3574 4.2% max. Staining and Bleeding DIN 18 542 Meets DIN requirements Resistonce to UV and Moisture DIN 18542 Meets DIN requirements Shelf Life 2 years Water Resistance ASTM E 331 12 psf ASTM E 547 12psf Fire Testing ASTM E 84' Flame Spread;0, Smoke Developed: 5 Compatibility with conven tional construction materials DIN 52423 Nosigns ofcorrosion wereobservedon zinc, steel,galvanizedsteel,aluminium and copper; no odverse effects with concrete, aerated con crete, brick,some natural stone, PVC,Plexiglos ond wood; for other materials consultillbruck Ideal Storage Temperature 34 °F-68°F Performance Guorantee 10 year worronty^ on performance