Chicago Pneumatic Tools - Air Tool Parts for All Makes and Models

Transcription

High-performance
products.
Designed for you!
Construction Equipment
Introduction
The Chicago Pneumatic Brand offers a complete line of Construction Equipment
designed to efficiently handle a broad range of applications.
Each Chicago Pneumatic (CP) tool is easy to use, comfortable to hold, and operates
at top performance over an unusually long life. CP Compressors are reliable and
easy to maintain. The range features proven designs with powerful engines from well
known manufacturers.
Chicago Pneumatic Construction Equipment distributors are tool and compressor
experts who can precisely match the performance characteristics of CP tools to your
specific job requirements.
For tools, parts and accessory information, and for service, contact a CP Construction
Equipment distributor nearest you. Find them listed on the web at www.cp.com, or by
calling a customer service representative toll-free at 800-760-4049.
Limited Warranty
Products of the Chicago Pneumatic Brand (CP) are warranted to be free from defects in
material and workmanship for one year from the date of purchase.
This warranty applies only to products purchased new from CP or its authorized dealers. Of
course, this warranty does not apply to products which have been abused, misused, modified or
repaired by someone other than CP or its Authorized Service Representatives.
If a CP product proves defective in material or workmanship within one year after purchase,
return it to any Chicago Pneumatic Authorized Service Center for CP tools, transportation
prepaid, enclosing your name and address, adequate proof of date of purchase and a short
description of the defect. CP will, at its discretion, repair or replace defective products free of
charge. Repairs or replacements are warranted as described above for the remainder of the
original warranty period. CP’s sole liability and your exclusive remedy under this warranty is
limited to repair or replacement of the defective product. There are not other warranties
expressed or implied and CP shall not be liable for incidental, consequential or special
damages, or any other damages, costs, or expenses excepting only the cost or expense of
repair or replacement as described above.
A History of Unequaled Quality
In 2009, Chicago Pneumatic Tool Company (CP)
celebrated 108 years as a pioneer and market leader
in the pneumatic tool industry. When the company
incorporated more than a century ago, pneumatic tools
were a revolutionary new technology. J.W. Duntley, an
ambitious foreman in a Milwaukee foundry, recognized
the potential in these tools and set out to pursue his
American dream.
With keen intellect and little money, he partnered with
young steel tycoon Charles Schwab to manufacture and
market air tools under the Chicago Pneumatic name. At
that time, most manufacturers specialized in creating only one type of tool. Duntley realized
that if Chicago Pneumatic could manufacture and sell a complete line of pneumatic tools, it
could provide superior service. In a sense, he had the vision for one-stop shopping for the
pneumatic tool industry long before it became the norm.
He did not, however, realize his company would have
such an impact on the world. As the industry’s most
experienced manufacturer, Chicago Pneumatic has
developed tools that were used to build and maintain some of the world’s most recognizable landmarks.
CP impact wrenches and rivet busters were used to
construct iconic and engineering marvels such as the
Empire State Building and the Golden Gate Bridge. The
company’s concrete vibrators were partially responsible
for the construction of the Hoover Dam, one of America’s
“seven modern civil engineering wonders”.
When the United States found itself embroiled in World War II, CP produced the tools
necessary to fabricate, assemble and maintain the nation’s military equipment. And in
addition to helping the nation’s defense, one Chicago Pneumatic tool became part of
an icon that symbolizes American character and courage. In the painting “Rosie the
Riveter”, by legendary illustrator Norman Rockwell, the well-recognized factory worker eats
her lunch with a CP riveting hammer lying on her lap.
Chicago Pneumatic continued to expand its global
business as the century progressed, and even began
making its mark on space travel. During the late 1960s
and early 70s, in the Apollo program, the United States
sent men into space and explored the moon. What
is arguably the most technologically advanced
organization in the world depended on Chicago
Pneumatic tools for the safety of the astronauts. NASA
used Chicago Pneumatic’s air motors in the Apollo
space capsules, employing them to rotate the capsules
upon their return to Earth, ensuring that the exit hatches
faced up and out of the sea, making exit safe for
the astronauts.
J.W. Duntley signed the incorporation papers for Chicago Pneumatic Tool Company in New
Jersey in December of 1901. More than one hundred years ago, he could not have known
that the tools his company crafted would help to build at least four of the “Top Ten Construction
Achievements” of the 20th century. Nevertheless, perhaps he did realize, all those years ago, that
the brand he built and the commitment to quality he instilled would make CP tools the first choice
of generations of people around the world.
Table of Contents
Percussion Tool Safety 4
Breakers—4-Bolt
6
Rivet Busters
9
Spike Drivers
12
Clay Diggers & Picks 12
Scabblers
13
Combi Drills / Hammers14
Sinker Drills
15
Chipping Hammers
16
Tampers
21
Pumps
22
Vibrators
24
Cut-off Saw
24
Core Drill
25
Air Line Accessories
26
Compressors
27
RCP Compressors
32
Aftermarket
33
Gas Powered Breakers 34
Chisels
36
Hydraulic Tools
37
RX Hydraulic Breakers 44
Generators
50
Percussion Tool Safety
Riveting and chipping hammers, demolition tools,
rock drills, tampers and rammers
The goal of Chicago Pneumatic is to produce tools that help you work safely and
efficiently. The most important safety device for this or any tool is the operator. Care
and good judgment are the best protection against injury.
All possible hazards cannot be covered here, but we have tried to highlight some of the
most important ones.
Before operating any Chicago Pneumatic tool, always read the safety instructions that
accompany each tool. All Chicago Pneumatic tools supplied with retainers and guards
should have these parts properly secured in place during operation.
For Additional Safety Information Consult:
• Other documents and information packed with the tool
• Your employer, union and/or trade association
• U.S. Department of Labor (OSHA); Council of the European Communities and/or local codes.
• “Safety Code for Portable Air Tools” (ANSI B186.1) is available from: American National Standards Institute, Inc., 11 W. 42nd Street, New York, NY 10036
• “Safety Requirement for hand-held non-electric power tools” is available from: European Committee for Standardization, Rue de Stassart 36, 1050 Brussels, Belgium.
Air Supply and Connection Hazards
• Air under pressure can cause severe injury.
• Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.
• Never direct air at yourself or anyone else.
• Whipping hoses can cause serious injury. Always check for damaged or loose
hoses and fittings.
• Do not use quick disconnect couplings at tool. See instructions for correct setup.
• Whenever universal twist couplings are used, lock pins must be installed.
• Do not exceed maximum air pressure of 90 psi or as stated on tool nameplate.
Projectile Hazards
• Always wear impact-resistant eye and face protection when involved with or near
the operation, repair or maintenance of the tool or when changing accessories on
the tool.
• Be sure all others in the area are wearing impact-resistant eye and face protection.
• Never operate a tool unless the accessory is retained in the tool with a proper retainer. Please refer to the appropriate parts list.
• To avoid injury, retainer parts must be replaced when they become worn, cracked or distorted.
• Wear a safety helmet.
4
Operating Hazards
• To prevent damage to both tool and accessory, accessory must be held firmly against the work surface before tool is throttled.
• Always shut off the air supply, relieve hose of air pressure and disconnect tool from air supply when changing accessories.
• Avoid direct contact with accessory and work surface during and after work as they become heated and sharp.
• Wear gloves to protect hands.
• Operators and maintenance personnel must be physically able to handle the bulk,
weight and power of the tool.
• Holding the accessory with the free hand can be a source of vibration exposure
or injury.
• To avoid injury from entanglement, do not wear loose clothing when using a
rock drill.
• Wear safety shoes, especially when collaring steels or tamping.
• Only use the machine for the jobs for which it is intended.
Accessory Hazards
• Never use any chisel as a hand struck tool. They are specifically designed and
heat-treated to be used only in air hammers.
• Select the correct shank and retainer for the tool being used.
• Never use dull accessories, as they require excessive work pressure and can break from fatigue.
• Never cool a hot accessory in water. Brittleness and early failure can result.
• Chicago Pneumatic tools and accessories must not be modified in any way.
• Chicago Pneumatic percussion tools are not intended for use with any accessories that are not listed in the catalog.
• Accessory breakage or tool damage may result from prying. Take smaller bites to avoid getting struck.
Workplace Hazards
• Slipping, tripping and falling are major causes of serious injury or death. Be aware
of excess hose left on the walking or work surface.
• High sound levels can cause permanent hearing loss. Use hearing protection as
recommended by your employer or OSHA regulation (see 29 CFR part 1910).
• Maintain a balanced body position and secure footing.
• Repetitive work motions, awkward positions and exposure to vibration can be harmful to hands and arms. If numbness, tingling, pain or whitening of skin occurs, stop using the tool and consult a physician.
• Avoid inhaling dust or handling debris from the work process that can be harmful to your health.
• Proceed with care in unfamiliar surroundings. Hidden hazards may exist, such as
electric or other utility lines.
• Chicago Pneumatic tools are not intended for use in explosive atmospheres and are not insulated for contact with electric power sources.
• A used machine shall be treated and disposed of in such a way that the greatest
possible part of the material can be recycled and the influence on the environment
is kept as low as possible.
5
Breakers
Breakers — 4-Bolt High Performance Models
Model
Part number
Standard
hex chuck size
(in)
Retainer
type
Length
Weight
(in)
(lb)
Shipping
weight
(lb)
CP 0112—30-pound class—air consumption at 90 psi: 45 cfm
CP 0112
8900 0030 23
1 x 41/4
Latch
20
30
36
CP 0112 EX
8900 0030 24
1 x 41/4
Latch
303/8
33
39
CP 0112 S
8900 0030 25
CP 1210
8900 0030 01
1 x 41/4
Latch
211/8
44
47
CP 1210S
8900 0030 03
1 x 41/4
Latch
211/8
48
49
CP 1210S
8900 0030 09
11/4 x 6
Latch
23
49
CP 1210S
8900 0030 07
11/8 x 6
Latch
23
49
CP 1210 SVR
8900 0030 05
1 x 4 /4
Latch
23 /2
51
CP 1210 SVR
8900 0030 08
11/8 x 6
Latch
251/2
55
CP 1210 SVR
8900 0030 10
11/4 x 6
Latch
251/2
55
1
1
57
CP 1230
T022073
11/8 x 6
Latch
261/2
65
66
CP 1230 S
T022158
11/8 x 6
Latch
261/2
68
68
CP 1230 SVR
T024227
11/8 x 6
Latch
271/2
76
81
CP 1230
T022074
11/4 x 6
Latch
261/2
65
66
CP 1230 S
T022159
11/4 x 6
Latch
261/2
68
68
CP 1230 SVR
T024239
11/4 x 6
Latch
271/2
76
81
89
CP 1240
T022075
11/8 x 6
Latch
283/4
83
CP 1240 S
T022221
1 /8 x 6
Latch
283/4
86
92
CP 1240 SVR
T024536
11/8 x 6
Latch
30
95
98
CP 1240
T022076
11/4 x 6
Latch
283/4
83
89
CP 1240 S
T022222
11/4 x 6
Latch
283/4
86
92
CP 1240 SVR
T024535
11/4 x 6
Latch
30
95
98
1
EX = Extended handle for trench work; S = Silenced models; SVR = Silenced Vibration + reduced models
CP Four-bolt breakers require minimal servicing to maintain peak operating
efficiency over extended periods of rugged use.
Oversized springs, side bolts and anvil minimize repairs.
CP Breakers can be ordered with mufflers, or mufflers can be purchased
separately.
6
Breakers — 4-Bolt High Performance Models
Standard model
CP 1210, 1230 and 1240
CP1210S
CP 0112 and CP 1210
CP 1230 and CP 1240
The CP 0112 (30-pound class) and CP 1210
(35-pound class) demolition tools are lightweight yet rugged. They’re designed for light
to medium construction and plant maintenance
work such as demolition of floors, pavement,
bridge maintenance, asphalt, frozen ground
and masonry walls. They’re very popular for
bridge deck jobs. CP 0112 EX has an extended handle for trench work.
The CP 1230 (60-pound class) and CP 1240
(90-pound class) demolition tools are engineered to deliver the power and durability
necessary for a variety of construction and
plant maintenance applications such as
breaking heavy and reinforced concrete,
frozen ground, asphalt, boulders and pavement.
Features
•
•
•
•
•
•
Alloy steel forgings provide excellent durability
Four-bolt backhead design withstands rugged use
Integral oiler provides continuous lubrication
Heavy-duty front headsprings on CP 1210 reduce reaction back to operator
CP 1210S is equipped with a silencer to
reduce sound level
Vibration reduced handle (SVR) is available
on the CP 1210 SVR
Features
•
•
•
•
•
•
•
•
Alloy steel forgings provide excellent durability
Four-bolt backhead design withstands
rugged use
Integral oiler provides continuous lubrication
Heavy-duty front headsprings reduce reaction
back to operator
Reversible piston reduces maintenance cost
Air inlet swivel for easy maneuverability
CP 1230S and CP 1240S are equipped with
silencers
Vibration reduced handle (SVR) available on
the CP 1230 SVR and CP 1240 SVR
Breakers can be ordered with
mufflers or mufflers can be
purchased separately.
Vibration reduced models (VRS)
are also silenced.
1210 SVR
1230 SVR
1240 SVR
7
Breakers
Replacement Parts
Retainer latch kits include:
Side bolt kits include:
latch, latch bushing, bolt or pin, and other
parts needed to safely and easily replace
worn or broken latches
two each of side rod bolts, nuts, springs and
lock washers
Contents of Latch Kits
Product
CP 1210
CP 1230
CP 1240
Contents
Contents of Side Bolt Kits
Model
CP 1210
(Steel spring)
1”
CP1210
(PU spring)
1-1/8” and 1-1/4”
CP 1230
CP 1240
Kit article no.
3303 0050 44
3303 0050 45
3303 0050 56
3303 0050 57
2 x side bolt
R 110217
R 110217
R 047970
F 037790
2 x nut - side bolt
R 110218
R 110217
R 047970
F 037789
2 x lock washer - nut
R 041073
R 041073
R 090584
R 096059
2 x front head spring
R 093698
3303 0050 33
R 047971
R 092915
Contents
8
River Busters
Rivet Busters for both metal and concrete applications
Pound for pound, there is no hammer with
more hitting power than a rivet buster. Even
a paving breaker would need to be at least
twice as heavy to deliver an equivalent blow.
This super-power can still be controlled
thanks to low blow frequency and teasing
throttle. That’s why the rivet buster is one of
the favorite tools of demolition contractors in
the US. Users have discovered many new
applications for rivet busters for working in
both concrete and steel. No longer is the buster used e
xclusively by iron workers for form
ing and cutting rivets, but it has now found its
way into the hands of operators who need the
most powerful tool for the job.
Concrete applications
•Bridge deck work, where weight of breakers
is restricted
•De-capping foundation pillars, where
concrete is very hard
•Medium to heavy concrete demolition
•As an alternative to paving breakers where high
hitting power is required but applied in
a restrained space or working horizontally
Special Jumbo Shank steel accessories
for rivet busters
Metal applications
•Cutting and removing large rivets and bolts with
narrow chisels and backout punch, or other special steel and accessories
•Cutting metal tanks or plates
(3/16” thick, 5 mm) with ripper chisel
•Industrial applications such as foundries or the
petrochemical industry with beryllium chisels
9
Rivet Busters with CPS
Rivet Busters with CPS
Key features
Originally designed for cutting and forming metal rivets, the CP buster is now used for concrete
demolition and has become one of the stars of the CP range. It has a low frequency blow with
hitting power equivalent to a paving breaker twice its weight. The new CPS includes a stepped
piston and step cylinder to prevent accidental ejection of the piston.
“D” handle
4611 P - 11” OPEN HANDLE
4611 D - 11” D-HANDLE
4608 P - 8” OPEN HANDLE
4608 D - 8” D-HANDLE
• Teasing throttle for progressive hitting
frequency gives better control of such a
powerful machine
• Special Boyer valve makes the cylinder
stroke effectively longer for more hitting
power
• Boyer valve’s high quality design makes
the blow more consistent
• Forged steel handle for long life in rugged conditions
• Stepped piston of hardened steel
Open grip handle
• New buffer ring is now 90 durometer
rubber for extra life
• Stepped piston to prevent accidental
ejection of the piston
• Choice of cylinders:
11” cylinder (720 bpm)
8” cylinder (1080 bpm)
• Choice of handle:
Open grip with outside trigger
“D” handle with inside trigger
• 1/2 ” inlet bushing
With each buster, it is recommended that you also purchase these additional consumable items:
a rubber bumper (3303 0051 03), lower sleeve (P072333), upper sleeve (P156988), retainer spring (P073942)
and whip hose (9246 0203 64).
CPS Control Power System
The wear indicating groove (l) on the lower
sleeve indicates that the bumper is completely
worn out and needs to be replaced.
When the bumper is 75% worn out, the
bleeding ports (J) are opened due to the
outward movement of the upper and lower
sleeves, causing the piston to stop in its lower
position and the air to the exhaust above
retainer.
Rubber bumper
3303 0051 03
A. Lower sleeve
B. Bumper
C. Upper sleeve
Continuing to use the buster when the automatic stop function has triggered may cause
damage to the sleeves and possibly the
cylinder.
Part no.
Model
Weight
(lb)
Blows
per minute
(bpm)
Cylinder
stroke
(in)
Length
(in)
Air
consumption
(cfm)
8900 0001 49
4608 P
30
1080
8
23
45
1
/2
8900 0001 50
4611 P
33
720
11
26
45
1
/2
8900 0001 51
4608 D
31
1080
8
23
45
1
/2
8900 0001 52
4611 D
34
720
11
26
45
1
/2
10
Air inlet
(in)
Chuck size
(Jumbo Shank)
Handle
Cylinder
.890” x 1.125” Taper
Open grip-Outside trigger
Short cylinder
.890” x 1.125” Taper
Open grip-Outside trigger
Long cylinder
.890” x 1.125” Taper
“D” handle-Inside trigger
Short cylinder
.890” x 1.125” Taper
“D” handle-Inside trigger
Long cylinder
HEAVY DUTY
DUTY RIVET
RIVET BUSTER
BUSTER STEEL
STEEL
HEAVY
HEAVY DUTY RIVET BUSTER STEEL
Jumbo 11X
1.3/4
1.3/4
3/4
3/4
1.3/4
Jumbo 11X
1.1/8
1.1/8
Jumbo 11X
3/4
7/8
2.3/8
2.3/8
1.1/8
7/8
7/8
HEAVY DUTY RIVET BUSTER STEEL
Type of
Type
bodyof
body
Type of Working End
Type of Working End
Jumbo 11X
Type of
of Working
End STEEL
HEAVY DUTY Type
RIVET
BUSTER
body
Part Number
Part Number
Part Number
Type of
body
Narrow
Narrow
Narrow
Chisel
Chisel
Chisel
Narrow
Moil
Chisel
Point
Loose
Loose
Loose
Rivet
Rivet
Rivet
Buster
Buster
Loose
Buster
Narrow
Rivet
Tight
Tight
Chisel
Buster
Rivet
Tight
Rivet
Buster
Rivet
Buster
Tight
Buster
Drift
Rivet
Loose
Pin
Buster
Rivet
Driver
Drift
Pin
Drift
Pin
Buster
Driver
Driver
Ripper
Drift
Pin
Tight
Driver
Rivet
Ripper
Buster
Ripper
Backout
Punch
Ripper
Drift
Pin
Backout
Backout
Driver
Punch
Punch
Backout
Punch
Ripper
Length
o/a
2.3/8
1.3/4
Length
o/a
inches
Blade
width
inches
inches
Length
incheso/a
3083 4140 10
3083
20
3083 4140
4140
3083
414000
00
3083
4140
20
3083
4140 10
Part Number
3083
4140 10
3083 4140 20
3083 4141
4140 00
20
3083
3083 4141 00
3083
4141
00
3083 4141 10
3083
10
3083 4141
4141 10
3083
4141
20
3083
4141 20
00
3083
3083 4141
4141 20
3083
4140
00
3083 4141 10
3083
4140
10
4142
00
3083
414100
20
3083 4142
4142
3083
00
3083
20
4142
10
3083 4140
4142 10
3083 4142 10
3083 4146
4146
3083
20
3083
414220
00
3083
4146
20
3083 4141
4142 00
10
3083
3083 4145
4145
3083
00
3083
414600
20
3083
4141
10
3083
4145
00
3083 4145 10
3083
4145
10
3083
20
3083 4141
4145 20
3083
4145
10
3083
4145
20
3083 4145
4145 20
00
3083
3083
414500
10
3083 4142
4143
3083
00
3083 4142
4145 10
20
3083
3083 4146
4143 20
00
3083 4143 00
3083 4144 00 3083
3083 4145
4143 00
00
3083 4145 10
3083 4145
4144 20
00
3083
00
3083 4144
4148 10
3083 4148 20
9246 0203 69
- 7NPT
- - 5oz
Lubricator comp 3/4”
Lubricator comp 3/4” NPT - 8oz
9246 0203 68
Lubricator comp 3/4” NPT - 11oz
8900 0050 01
Water separator 3/4” NPT thread
8099 0202 43
Airoline oil 1L
9246 0203 64
Whip hose with swivel 1/2” NPT
9246 0203 61
Whip hose w/5 oz- oiler
7 - and swivel
9246 0203 91
Whip hose w/11 oz oiler and swivel
Price
Price
lbs.
Weight
lbs.
$
Price
$
7/8
Tip
width/
inches
Bladesize
(in)
Blade width
1
inches
1
1 1
1 1
1
11 1
1
1.1/8
11 1/8
1.1/8
1.1/8
1 1/8
1.1/8
1
1
1.1/8
1.1/8/8
1.1/8
1.1/8
1 1
1 /8
1.1/8
1.1/8
11 1/8
1.1/8
1.1/8
11 1/8
1.1/8
1.1/8
1.1/8
1.1/8
7
1.1/8
/8 dia.
1.1/8
1.1/8
1.1/8
1.1/8
7/8
dia.
7/8 dia.
1.1/8
7/8
dia.
1.1/8
1.1/8
/8
/8
3
/4
1/23/4
1/2
7/8
dia.
5/87/8
5/87/ 3/4 8
5
5
3083
414440
00
3083 4148
3083
4147
00
3083 4143
4148 50
4147
3083
00
3083
10
3083 4147
4148 70
3083
4147
10
3083 4147
4148 80
3083
20
3083
4147
00
1/2
3083 4147 20
3/4
3083
4147
30
3/4
3083 4147
4147 30
10
5/8
3083
3/4
3083
4147
40
7/8
3083 4147
4147 40
20
3/4
3083
7/8
3083
4144
00
3083
4147
50
7/8
3083
4147
30
3/4
3083 4147 50
7/8
Consumables and accessories
3083
4147
60
1
3083 4147
4147 60
40
7/8
3083
1
3083
4147
70
1
3083
4147
50
7/8
Consumables and accessories for rivet busters
using
jumbo
steels
70
1
3083 4147 00
1/2
Backout
3083
4147
60
1
Part no.
Description 3083 4147 10
5/8
Punch
3083
4147
70
1
3/4
P 072 333
Lower sleeve 3083 4147 20
3083
4147
30
3/4
P 156 988
Upper sleeve
3083 4147 40
7/8
3303 0051 03
Rubber bumper
3083 4147 50
7/8
P 073 942
Retainer Spring (standard
3083 4147 60
1
9246 0203 72
Air swivel 1/2” NPT
3083
4147
70
1
-79246 0206 64
Weight
Weight
3/4
1.1/8
Description
Type of Part Number
3083 4140 00
Moil
body
Moil
3083
4140 00
Point
3083 4140 10
Point
Moil
Moil
point
Type of Working End
Point
Blade width
Blade width
Length inches
10overall
10 (in)
2.3/8
12
12
18
10 10
18
Length
o/a
12 12
18
18
10
inches
10
12 10
12 12
18
10 18
18
10
12
12
10
18
10 10
18
12 12
12
18
10 18
18
12
10
10
18 10
12
10 12
12
18
12 18
18
10
18
12 7 1/2
10
18
12
18
7.1/2
7.1/2
lbs. Weight $
2
28.05
2
28.05
2.1/2 (lbs.)33.65
2.1/2
33.65
4
2 46.00
28.05
42
Weight
Price
1 46.00
2.1/2 2 /233.65
4
46.00
24
28.05
lbs.
$
2
28.05
2
2.1/2
33.65
2.1/2 2 1/233.65
4
46.00
28.05
42 4 46.00
2
28.05
2.1/2
33.65
2.1/2
24 2 33.65
31.40
46.00
2
31.40
4 2 1/246.00
2.1/2
37.00
2.1/2
37.00
4 57.20
4
31.40
42
57.20
2.1/2
37.00
2
28.05
24 2 44.90
57.20
2.1/2
2 2 1/233.65
44.90
2.1/2
53.85
4
4 46.00
2.1/2
53.85
4
67.30
44.90
42
67.30
1
2.1/2
53.85
2 1 /231.40
4
67.30
2.1/2
37.00
4
1.1/2
1.1/2
9
10
7.1/2
12
18
9
9 10
12
9 10
9.3/412
9.3/4
7.1/2
9.3/410
9.3/412
9.1/2
9.3/4
9.1/2
12
9.3/4
12
9.1/2
9.1/2
9.1/2
9
12
12
12
9.1/2
9.1/2
9.1/2
12
12
12
9.3/4
9.1/2
9.3/4
12
9.1/2
12
9.1/2
12
9.1/2
12
Line oilers
57.20
53.85
53.85
1 /4
3
2
44.90
1.1/2
53.85
2.1/2
53.85
4
67.30
1.3/4
50.50
1.3/4 1 3/450.50
Water separator
1 /4
3
1.3/4 2 50.50
1.1/2 3 35.90
35.90
1.1/2 2 3/453.85
1.3/4 2 /438.15
1.3/4 3 38.15
1.3/4
38.15
1.1/2 38.15
35.90
1.3/4
2.1/2
35.90
1.3/4 35.90
38.15
2.1/2
2
38.15
1.3/4
38.15
2
38.15
1.3/4
50.50
2.3/4
37.00
2.1/2
35.90
2.3/4
37.00
2.1/2
40.40
2
38.15
2.1/2
40.40
2.3/4
47.10
2.3/4 35.90
37.00
2.3/4
47.10
1.1/2
2.1/2
40.40
1.3/4
38.15
2.3/4 38.15
47.10
1.3/4
2.1/2
35.90
2
38.15
2.3/4
37.00
2.1/2
40.40
2.3/4
47.10
RedX Hose
8900 0050 08
-7-
11
Spike Drivers, Clay Diggers and Picks
Spike Drivers
Chicago Pneumatic spike drivers are rugged, powerful tools which can be used
for driving spikes in railroad, construction and plant maintenance applications.
CP 1230 SPDR
CP 1240 SPDR
•
•
•
•
•
•
•
Heat-treated alloy steel components
for excellent durability
Spike driver front hood
Built in lubricator
Model
Lightweight and compact for
easy handling
High power-to-weight ratio
Spike driver front hood
Built in lubricator
Part number
Length
(in)
Max head
diameter
(in)
Weight
(lb)
Shipping
weight
(lb)
CP 1230—Air consumption at 90 psi: 63 cfm
CP 1230 SPDR
T021612
241/2
17/8
60
65
CP 1230 S SPDR
T021613
241/2
17/8
60
65
CP 1230 S SPDR
CP 1240 SPDR
T021042
241/2
17/8
81
86
CP 1240 S SPDR
T021041
24 /2
1 /8
81
86
1
7
CP 1240 S SPDR
Clay Diggers and Picks
Clay diggers and picks are well suited for trenching and tunneling. Their light weight
makes them ideal for overhead work and light demolition.
CP 0111
CP 0222
•
•
•
•
•
•
Heat-treated alloy steel components
for excellent durability
Latch retainer
Lightweight and compact for
easy handling
Latch retainer
CP 0222
Model
Part
number
Standard
hex chuck
(in)
Bore and
stroke
(in)
Throttle
type
Length
Weight
(in)
(lb)
CP 0111—Air consumption at 90 psi: 45 cfm, 3/8” (NPT) air inlet thread
CP 0111 CHIT
8900 0001 41
CP 0111 CHLA
8900 0001 20
/8 x 31/4
1.63 x 3.5
inside trigger
221/2
29
1 x 41/4
1.63 x 3.5
outside trigger
221/2
29
1.6 x 3.38
inside trigger
191/2
22
7
CP 0222 CHIT
12
8900 0001 21
/8 x 31/4
7
CP 0111
Scabblers
Scabblers
Scabblers are ideal for cleaning and roughing concrete and construction joints. They can also
be used to produce ornamental or contrasting finishes on building structures.
CP 0006
CP 0066
•
•
•
•
•
•
•
Lightweight, compact tool with
contoured grip handle reduces
operator fatigue and increases output
Tungsten carbide-tipped pistons
last longer and are easily replaced
Back head grip gives in-line thrust
Chamfered cylinder block increases
visibility of the work piece permitting
close operation in tight corners
Lightweight, compact tool with
contoured grip handle reduces
operator fatigue and increases output
Tungsten carbide-tipped pistons
last longer and are easily replaced
Chamfered cylinder block increases
visibility of the work piece permitting
close operation in tight corners
CP 0006
Replacement parts
Replacement pistons
Model
Piston caps
(order one for each replacement piston)
Model
Part number
bpm
per piston
Bore
Stroke
(in)
(in)
Weight
Length
Part number
CP 0006
F064604
CP 0066
R145921
Model
Height (pistons
extended)
(in)
Width
(in)
Part number
CP 0006
F826706
CP 0066
R147614
Number/type
of pistons
All models—Air consumption at 90 psi: 29 cfm, 1/2” (NPT) air inlet thread
CP 0006*
T022137
3000
1
1
10
16
7
4
Three 4-point carbide tipped
CP 0066*
T024412
3000
0
1
10
11
5
2
3
*Use whip hoses on page 11 for Rivet Busters
13
Rock Drills
Combi Drills / Hammers
These versatile tools are both a drill and a chipping hammer. A push of the rotation
release button easily and quickly converts the tool to a hammer.
The CP 0009 and CP 0014RR rotary hammers are designed for a wide variety
of construction and maintenance applications such as driving or setting masonry
anchors and drilling holes in concrete, bricks or rock. As a hammer, these tools can
be used for chipping, scarifying, scaling and cleaning welds.
Drilling rates in hard rock and concrete
(use as guide only)
Model
Drill rate
(in/min)
Hole diameter
(in)
CP 0009
12
11/4
CP 0014 RR
18
13/4
All Models
• Excellent power-to-weight ratio helps
drill holes faster and easier than
comparable electric rotary hammers
• Built-in oiler provides continuous
lubrication
• Teasing throttle for precise control
• Rotation release button converts tool
to a hammer (except on CP 0009AC)
• Cushioned piston for smooth
operation and long tool life
• Muffler available to reduce noise
CP 0009
CP 0009
• Right hand rotation
• With an adaptor, can be used with
electric hammer drill bits
• Spline version available
• Adapter (R137586) round to SDS
CP 0014
CP 0014
• Superior drilling rates
• Greater drilling capacity compared to
plug hole drills
• Designed for production drilling
of small holes
Model
Mufflers
Model
Part no.
CP 0009 A
F815350
CP 0009 AC
F826972
CP 0009 F
F815350
CP 0014 RR
F827044
Part
number
Net
weight
(lb)
Overall
length
(in)
Type
of chuck
(in)
CP 0009 A
T022083
8
143/4
round shank
3
CP 0009 AC*
Z0027413
8
143/4
round shank
3
CP 0009 F
T022511
8
143/4
spline drive
T022173
15
181/2
spring hex shank
Chuck size
(in)
/4 x 33/4
/4 x 33/4
CP 0014 RR—Air consumption at 90 psi: 32 cfm, 3/8” (NPT) air inlet thread
CP 0014 RR
* without stop rotation, round shank steels, eliminate rotation.
14
/8 x 31/4
7
Sinker Drills
Chicago Pneumatic sinker drills are ideal for a range of drilling applications. Their
streamlined design incorporates smooth contours, a side exhaust and a “flat back”
that makes them easy to handle in quarry, mine, drilling and doweling work. The
design also provides a main valve and cylinder-porting concept that helps maintain
constant drilling speed throughout a long service life. Working parts are continually
protected with an effective lubrication system. Standard and silenced versions are
available in a range of weights and sizes to fit any requirement.
CP 0022
30-pound class
The CP 0022 provides drilling capability
for holes up to 13/4” diameter, 8 feet
deep. This is the ideal choice where a
lightweight and powerful tool is needed
in public works, utilities and drilling from
scaffolding. Also the correct choice
where air supply is limited. CP 0022 can
also be equipped with 3/4” x 41/4” bushing
and spring
CP 0032A
CP 0022
CP 0032A
All Models
Comfort handle options
•
•
•
•
•
•
•
•
CP 0022, CP 0032A, and CP 0069 can
also be equipped with a comfort handle
(order kit: R154915).
Forged steel housings withstand
rugged use
Cushioned piston reduces shock
Multiposition throttle for easy starting
of holes
Blower lever for deep hole cleaning on
CP 0032 and CP 0069
Integral oiler provides continuous
lubrication
3
/4” (NPT) air inlet swivel improves
maneuverability
Double-grip handles
Left hand rotation
Model
Part
number
Mufflers
Model
Part number
CP 0032A
R125569
CP 0069
R278142
Net
weight
(lb)
Overall length
with retainer
(in)
Standard hex.
chuck size
(in)
CP 0022—30-pound class—Air consumption at 90 psi: 56 cfm
CP 0022
8900 0020 01
28
197/8
7
CP 0022
8900 0020 02
28
19 /8
7
7
/8 x 31/4
/8 x 41/4
45-50-pound class
Choose the CP 0032A for holes up to
2” diameter and 10 feet deep. A top
performer in its class, the CP 0032A is
highly effective in general excavation
work, quarry drilling, bench mining
and other jobs requiring a sinker drill in
the 45-pound class. The tool’s durable
“beavertail” retainer helps it deliver
increased contact and reduces collar
wear.
Use with part number R147457 - Water
Kit for use with flushing water
CP 0069
60-pound class
The CP 0069 is suited for drilling 21/2”
diameter holes 20 feet deep. The heavyduty CP 0069 sinker is a hard-hitting
tool that combines high drilling speed
with excellent hole cleaning ability.
Its trouble-free “beavertail” retainer
provides greater front-end durability and
increased collar contact to reduce wear.
Drilling rates in hard rock
(use as guide only)
Model
CP 0032—45- to 50-pound class—Air consumption at 90 psi: 103 cfm
CP 0032A .87
T022318
54
22
7
CP 0032A .87 A
T022117
54
23
7
CP 0032A-1
T022319
54
23
1 x 41/4
/8 x 31/4
/8 x 41/4
Drill rate
(in/min)
Hole diameter
(in)
CP 0022
6.0
15/8
CP 0032
9.0
13/4
CP 0069
10.2
13/4
CP 0069—60-pound class—Air consumption at 90 psi: 130 cfm
CP 0069
T006661
64
241/4
7
CP 0069
T022259
64
24 /4
1 x 41/4
CP 0069 - wet
T025423
64
241/4
7
1
/8 x 41/4
/8 x 41/4
15
Chipping Hammers
Chipping Hammers
CP 0012 handle based on
the well known CP 0009 design
With 2”, 3” and 4” cylinder options, Chicago
Pneumatic offers a very complete range of
chipping hammers for all types of construction
and industrial applications. Introducing CP
0012, a new 12 lb. hammer for light chipping,
and additional features on the classics – CP
4123 and CP 4125 hammers – for extra
toughness and reliability.
CP 0012
CP 4123 with simplate valve
CP 4123
CP 4125
•
•
•
•
•
•
Unique ring valve as standard for harder
blow in tough applications or dirty
environments
Chrome plated cylinder for extra durability
Spline locking to prevent loosening of
handle or cylinder
•
•
Available in 2”, 3” or 4” cylinder
stroke versions
Choice of bushing:
.680” Round chisel rotates freely
.580” Hex prevents chisel rotation
Classic simplate valve
Heat treated cylinder
Now with spline lock instead
of clip locking mechanism
CP 4123 and CP 4125
CP 4125 now has a unique
ring valve design as standard
•
•
•
•
Powerful, yet compact and lightweight
Rugged construction, hardened steel
cylinder and handle
Teasing throttle for precise control
Open grip handle with self closing
outside trigger
CP 4130
CP 4125 special heat treated
cylinders with chrome plated bores
for extra durability
CP 4130 four bolt flange for increased durability, strength and ease
of service
•
•
•
•
•
•
•
Locking mechanism with four high
strength ½” bolts
”D” handle with outside trigger and
extra safety mechanism
Muffler assembly as standard
Simplate valve for smooth operation
Strong and reliable
Available in 3” or 4” cylinder stroke versions
Choice of bushing:
CP 4132
Chipping hammers for construction and industrial applications
CP 0012
The CP 0012 is the new addition to the CP range of pneumatic hammers
for light chipping and scaling duties. Since the CP 0012 is light and has
medium hitting power, it is very easy to handle and control for more precise
jobs. Typical applications include alteration work, hole making and trimming.
CP 4123
The most popular CP chipping hammer of all times, the CP 4123 is used
for a wide variety of construction and industrial applications, from light to
medium chipping to heavy cutting. Choose the cylinder size that best suits
your particular application.
CP 4125
The extra features of the CP 4125 make it more suitable for tough construction
and industrial applications, including foundries, shipyards, refineries, or
fabrication shops. Even in hot, dirty working conditions, the reliable CP 4125
will consistently hit hard and last longer than conventional hammers.
CP 4130
The CP 4130 hammer is designed to tackle punishing jobs with the hard
hitting power that you expect from CP. It is used for medium-duty to heavy-duty
chipping, cutting and trimming operations. The four bolt handle provides
higher air flow and durability.
CP 4132
A durable 4-bolt chipping hammer with inside trigger and standard retainer.
Available in two cylinder sizes to suite your particular application.
Part no.
Model
Old model name
Weight
(lb)
8900 0001 02
3
CP 0012 2ßR
–
–
12
Cylinder
stroke
 Length
2
Air
consumption
(cfm)
Muffler included
as standard
Chuck size
(in)
Blows per
minute
(bpm)
16
2600
20
yes
.680” Rnd
(in)
8900 0001 03
CP 0012 2H
12
2
16
2600
20
yes
.580” Hex
8900 0001 04
CP 4123 2R
CP 4123 PYRA
13
2
127/8
2400
25
–
.680” Rnd
8900 0001 05
CP 4123 2H
CP 4123 PYRE
13
2
127/8
2400
25
–
.580” Hex
8900 0001 06
CP 4123 3R
CP 4123 PYSA
14 /4
3
147/8
1920
26
–
.680” Rnd
1
8900 0001 07
CP 4123 3H
CP 4123 PYSE
141/4
3
147/8
1920
26
–
.580” Hex
8900 0001 08
CP 4123 4R
CP 4123 PYTA
151/2
4
151/2
1500
27
–
.680” Rnd
8900 0001 09
CP 4123 4H
CP 4123 PYTE
151/2
4
151/2
1500
27
–
.580” Hex
8900 0001 10
CP 4125 2R
CP 4125 PALA
13
2
131/4
2400
26
–
.680” Rnd
8900 0001 11
CP 4125 2H
CP 4125 PALE
13
2
131/4
2400
26
–
.580” Hex
8900 0001 12
CP 4125 3R
CP 4125 PAMA
14 /4
3
14 /4
1920
27
–
.680” Rnd
8900 0001 13
CP 4125 3H
CP 4125 PAME
141/4
3
141/4
1920
27
–
.580” Hex
8900 0001 14
CP 4125 4R
CP 4125 PANA
151/2
4
151/4
1500
28
–
.680” Rnd
8900 0001 15
CP 4125 4H
CP 4125 PANE
151/2
4
151/4
1500
28
–
.580” Hex
8900 0001 16
CP 4130 3R
CP 4130 3RO
18 /2
3
16 /2
1920
26
yes
.680” Rnd
8900 0001 17
CP 4130 3H
CP 4130 3HO
181/2
3
161/2
1920
26
yes
.580” Hex
8900 0001 18
CP 4130 4R
CP 4130 4RO
191/2
4
173/4
1500
27
yes
.680” Rnd
8900 0001 19
CP 4130 4H
CP 4130 4HO
191/2
4
173/4
1500
27
yes
.580” Hex
9245 9998 00
CP 4132 3R
15
3
17
1800
33.23
9245 9997 99
CP 4132 3H
15
3
17
1800
33.23
.580” Hex
9245 9998 98
CP 4132 4R
15
4
17
1800
33.23
.680” Rnd
9245 9998 80
CP 4132 4H
15
4
17
1800
33.23
.580” Hex
1
1
1
1
.680” Rnd
/8” air inlet. All CP hammers are supplied with oval collar retainer as standard. More retainer options are available on page 20.
17
Chipping Hammers
Chipping Hammers New Models
NEW! CP 0017
• Designed for years of trouble-free service
• Closed aluminum handle with inside trigger for
maximum effectiveness and operator comfort
• Oil-resistant neoprene exhaust deflectors
• Available with choice of .580 or .680 round
bushings
Model
Part Number
Air
consumption
(CFM)
Blows
per minute
Chuck size
Length
Net weight
(in)
(in)
(lb)
CP 0017
8900 0001 36
32
2200
.680 round
151/4
19
CP 0017
8900 0001 37
32
2200
.580 hex
151/4
19
NEW! CP 4131
•
•
•
•
•
Lightweight
Easy to use and maintain
Choice of bushing:
Ball type retainer
D handle with outside trigger
Model
Part Number
Bore and Stroke
(in)
Blows per minute
Bushing size
(in)
Overall length*
(in)
Net weight
(lb)
CP 4131 3R
8900 0001 33
3
1900
.680 round
17 1/2
19
CP 4131 3H
8900 0001 34
3
1900
.580 hex
17 /2
19
CP 4131 features a thread on ball
type retainer as standard
18
Z8389857 Ball type retainer
safely secures accessories
1
Accessories
Steel for chipping hammers and clay diggers
Use the most effective steel for your application. Shown b
elow are a selection of
the most common types of steel used for the hammers presented in this brochure.
For the complete assortment of air line a
ccessories, see pages 20 and 26.
Chipping hammer steel (CP 0012, CP 4123, CP 4125, CP 4130, CP 4131, CP 4132)
Hex .580” shank
Description
Tip width/
blade size
Length
overall
Oval collar
Part no.
Round .680” shank
Round collar
Part no.
Oval collar
Part no.
Round collar
Part no.
Moil point
Wide chisel
Other lengths of steel accessories are available upon request. See catalog 9800 0362 93 for ordering numbers.
Clay digger steel (CP 0111 and CP 0222)
CP 0111—Hex 1” x 41/4” shank
Description
Tip width/
blade size
(in)
Moil point
Narrow chisel
Wide chisel
Bushing tool
CP 0222—Hex 7/8” x 31/4” shank – CP 0222
Length
overall
(in)
Flat to flat
15
3083 4030 00
Part no.
Tip width
blade size
(in)
Length
overall
(in)
Flat to flat
14
3083 4050 00
Part no.
18
3083 4030 10
18
3083 4050 10
24
3083 4030 20
24
3083 4050 20
17/8
15
3083 3309 00
1
14
3083 3303 00
1
1 /8
18
3083 4031 10
1
18
3083 4051 10
11/8
24
3083 4031 20
1
24
3083 3304 00
3x2
15
3083 3310 00
3 x 11/4
14
3083 3305 00
3x2
18
3083 4032 10
3 x 11/4
18
3083 4052 10
3x2
24
3083 4032 20
3 x 11/4
24
3083 4052 20
2 sq
9
3083 4036 00
2 sq
9
3083 4056 00
Other lengths of steel accessories are available upon request. See CP Accessories Price List for ordering numbers.
Wide chisel
Bushing tool
19
Accessories
For chipping hammers,
clay diggers and air line
Economy-type retainer
Line oilers
Model
Part no.
Description
Chipping hammer accessories
(CP 0012, CP 4123, CP 4125, CP 4130, CP 4131, CP 4132)
Retainers
Quick change retainer
Retainer springs
9245 9970 02
Ecomomy-type retainer, round collar
P114062
Quick change retainer, oval collar
P092869
AT Lug-type retainer, oval collar
9245 9983 14
Ball-type retainer, round collar
Water separator
P135246
Polyurethane
P070994
Wire
P139189
Heavy duty wire
Mufflers
P125052
CP 4123/CP 4125 muffler assembly
Hose swivels
9246 0203 70
CP 4123/CP 4125/CP 4132 7/8”-24 inlet thread
9246 0203 71
9246 0203 72
AT Lug-type retainer
Economy-type retainer, oval collar
9246 00205 01
CP 4130/CP 4131 7/8”-24 inlet thread with
/8” male pipe thread
3
CP Busters, Tampers, Saw 1/2” NPT air inlet thread
Muffler
Clay digger accessories (CP 0111 and CP 0222)
Mufflers
F814133
CP 0111 muffler assembly
R141765
CP 0222 muffler assembly
Air line accessories
In-line oilers
9246 0203 69
Lubricator 5 oz, w/Universal Couplings
Water separator
Ball-type retainer
9246 0203 68
8900 0050 01
3
Air-oil
/4” NPT thread
5 litre
Lubricator
CP’s Lubricator 43 uses the ejector principle to create controlled lubrication. Pick-up
assures oil supply regardless of the lubricator’s position.
NEW! Lubricator 43
• Accepts mineral or synthetic oil
• Fitted with US universal claw couplings
• 1” inner hose diameter
Model
Part No.
Max. working
pressure
(psi)
Oil tank
volume
(pints)
Dosage—
free air
(lb/feet3)
Weightempty
(lb)
232
2.75
.6 x 105 - 15 x 105
6.6
Air flow range: up to 300 cfm; Pressure drop at 90 psi at max flow: 4 psi
Lubricator 43
20
8900 0050 07
Tampers
Backfill Tampers
Chicago Pneumatic backfill tampers quickly and effectively compact soil around
foundations and other structures and are indispensable for compacting backfill
in trenches.
The CP 0003 is well equipped to handle light to medium applications
while the CP 0004RV is ideal for heavier jobs.
CP 0003 and CP 0004
•
•
•
•
•
•
•
•
•
Maximum power—slow, powerful blows
efficiently and quickly compact all types of
backfill, including clay and soils containing
high percentages of finely crushed or
powdered material
Heat-treated cylinder and chrome plated
piston significantly extend tool life
Adjustable packing maintains a positive
air seal
Aluminum butt held with clamp screw for
quick, easy replacement
Exhaust deflector directs air, moisture and oil
away from operator
Integral oiler continuously lubricates tool
during operation
Well-balanced, smooth-operating tool is
easily guided by one person
1
/2” (NPT) air inlet thread
For quieter operation, optional mufflers are
available
Model
Part
number
Valve
type
CP 0004
CP 0003
Bore
and stroke
Blows per
minute
(in)
Net weight
Overall
length
(lb)
(in)
Piston rod
Body dia.
(in)
Butt size
(in)
CP 0003
T019307
Simplate
117/16 x 6
800
30
52
7
5
Ring
21/4 x 6
780
42
50
1
61/4
/8
CP 0004
T022292
Accessories
Backfill tamper butts
Diameter
(in)
Material
CP 0003
CP 0004RV
21/2
Aluminum
-
P138879
5
Aluminum
P089008
-
1
6 /4
Aluminum
-
P089050
6
Iron
3303 0050 82
61/4
Iron
Pole Butt
Iron
Tamper butts for CP 0003 and CP 0004
3303 0050 81
3303 0050 84
3303 0050 83
Mufflers
Description
Part no.
CP 0003
P126126
CP 0004RV
P125807
21
Pumps
Sump pumps
Chicago Pneumatic’s CP 0010 and CP 0020
sump pumps are designed for high performance
and durability which makes them ideal for
removing water from trenches, ditches,
manholes, industrial sumps and excavations.
Both models will pump down to within only
7/8” from base.
CP 0010
CP 0020
Caution! CP 0010 and CP 0020
pumps are not intended for pumping
flammable fluids and must not be used
for doing so.
Model
Part
number
Min. water
depth
(in)
Overall
height
(in)
Height
w/o valve
(in)
Water
discharge
(NPT-in)
Net
weight
(lb)
Min. opening
pump will enter
(in)
Air inlet
thread size
(NPT-in)
Recommended
hose size
(in)
Motor
CP 0010
T022224
7/8
17 1/2
13 3/4
2
33
8 1/4 x 9
3/4
3/4
3
CP 0020
T022185
7/8
16
11 3/4
2 1/2
58
9 x 11 3/4
1
1
4
All Models
• Single-stage centrifugal units driven by
powerful vane motors
• Double seals protect bearings and motor
from water and mud
• Integral oiler provides continuous lubrication
• Integral strainer, air inlet valve
• Bronze impeller
• Cast-iron housing
• Air inlet valve
CP 0010 has exhaust pipe
1” NPT x 16” long (S038723).
CP 0020 has exhaust pipe
11/4” NPT x 18” long (C086080).
CP 0010 Performance—Air consumption at 90 psi: 100 cfm
Total
Head
(ft)
Discharge rate
40 psi
(gal/min)
60 psi
(gal/min)
80 psi
(gal/min)
90 psi
(gal/min)
100 psi
(gal/min)
10
160
220
240
245
255
20
140
205
230
240
250
30
120
185
215
230
245
40
90
160
200
215
230
50
60
135
175
195
210
60
10
105
155
175
195
70
-
80
130
150
170
24.3
-
60
95
125
155
90
-
-
75
105
125
100
-
-
55
75
95
CP 0020 Performance—Air consumption at 90 psi: 110 cfm
Total
Head
(ft)
22
(hp)
Discharge rate
40 psi
(gal/min)
60 psi
(gal/min)
80 psi
(gal/min)
100 psi
(gal/min)
10
230
285
325
340
20
195
265
315
330
30
150
245
300
320
40
130
220
280
305
50
100
190
260
280
60
65
165
230
260
70
-
125
200
225
80
-
80
160
190
90
-
-
-
155
Sludge pump
CP 0077 sludge pumps easily handle water containing
15% solids and particles up to 1” in size. They are suitable
for pumping sea water and certain corrosive chemicals.
CP 0077
• Has no motor or diaphragm to wear out
because it operates on venturi/ejector
principle
• Exhaust muffler reduces sound level
Caution! CP 0077 pumps are not
intended for pumping flammable fluids.
CP 0077 Performance at 90 psi,
zero suction head
Total head
(ft)
Discharge rate
(gal/min)
25
90
50
78
75
68
100
60
150
48
175
36
Model
Part number
CP 0077
Maximum suction lift
(ft at 90 psi)
Maximum
head
(ft)
Discharge
outlet
(NPT)
Air Inlet
thread size
(NPT)
20**
175**
21/2
3
Recommended
hose size
(in)
Net
weight
(lb)
1
152
CP 0077
T024005
/4
** Includes friction head from hose.
Accessories for CP 0077
Part number
Description
Inlet Hose Nipple
F027762
3” unthreaded x 21/2” BSP
Outlet Nipples
R146385
21/2” NPT (both ends)
R146383
21/2” NPT street elbow
23
Vibrators, Pneumatic Saw
Concrete Vibrators
Chicago Pneumatic’s CP 2190 heavy
duty concrete vibrator is designed for
removing air pockets from pourings of
low slump concrete in columns, footings,
slabs and walls. It has a greater radius
of influence which translates to a
greater amount of work accomplished
in a shorter period of time. And, unlike
electric concrete vibrators, there is no
chance of shock or need for extension
cords.
Model
CP 2190
CP 2190
•
•
•
•
•
Variable speed throttle
In-line lubricator
Auxiliary air hose
Locked motor end plates
1
/2” NPT air connection
Part
number
Air
consumption
(CFM)
Radius of
influence
(in)
Capacity
(cu. yds/hr)
Vibration
per
minute
T019308
65
15 - 16
40
12,000
Head dimensions
Diameter
(in)
Length
(in)
21/2
133/4
Net
weight
(lb)
Length w/o
aux. hose
(in)
Average
cfm
27
118
65
Cut-off Saw
Avoid the daily maintenance associated
with gas-powered saws.
The CP 0044 is an extremely durable
and powerful air tool driven by a direct
drive, 4 hp motor. It is designed to cut a
variety of surfaces including concrete,
asphalt and stone.
The CP 0044 is engineered for precise
balance so less effort is needed to get
the job done. A built-in oiler provides
continuous lubrication so more time
is spent on the job and less time on
servicing. Also designed with safety in
mind, the CP 0044 features a standard
lock-off trigger to help prevent accidental
starting. Plus, the blade guard can be
operated with one hand.
Model
CP 0044
•
•
•
•
•
•
•
•
Chicago Pneumatic 4 hp motor
One-hand operation blade guard
Integral oiler
Lock-off trigger
Direct drive operation
Two position handle
Well balanced and
extremely durable
1” diameter arbor accepts
industry standard blades
Part
number
Air
consumption
(CFM)
Blade arbor
diameter
(in)
No load
(rpm)
Weight
with blade
(lb)
Overall
length
(in)
Max. cutting
depth
(in)
Blade
cap
(in)
T024421
85
1
4800
28
261/2
4
14
24
CP 0044
Core Drill
Heavy Duty Core Drill
Chicago Pneumatic’s CP 0315 Core Drill is a
powerful, hand-held rotary drill with a threaded
output shaft onto which a water swivel and core
bit can be fitted. It was originally designed for
hand cutting holes in reinforced concrete junction boxes for fiber optic cables. It is now being
used in many other sectors of the construction
industry for cutting holes in concrete, brickwork
and stone and where access or position restricts
the use of rig-mounted units. It is also ideal for
use in hazardous environments where use of
electrical tools is forbidden.
CP 0315
• Core diameter range: 21/2” to 6”
• Powerful 1.2 hp air motor
• Self-closing twist throttle operation with
one-hand control
• Governor controlled motor holds speed at heavy loads while increasing power
• Integral oil reservoir ensures correct
oiling during use
• External grease fitting for easy lubrication
• Breast-plate for operator comfort during horizontal drilling
• Light weight promotes stable operation
• Optional adapter (C013048) is available
for standard drilling operation
Model
Part No.
Free
speed
(rpm)
Output
shaft
Air inlet
size
(in)
Length
Weight
(in)
(lb)
/2 bsp
13
14
CP 0315
T024733
750
/64” - 16 tpi
45
1
Core Drill Accessories
Description
Part no.
Water swivel— /64” input box thread, /2” BSP output pin thread
8900 0050 04
Adapter—convert from 1/2” BSP output pin thread to 11/4” UNC output pin thread
8900 0050 05
45
1
25
Accessories
Air line
Description
Part no.
CP oiler & separator kit
9245 0204 13
CP water separator
8900 0050 01
lubricator 43 1” NPT
8900 0050 07
CP Red-X hose set US 3/4 ” x 50’
8900 0050 08
whip hose - 10FT 7/8” - 24 swivel (TEX 317 - 419)
9246 0203 62
whip hose - 10FT 3/8” NPT swivel (All CP chip hammers)
9246 0203 63
whip hose - 10FT - 3/8” NPT swivel & 5oz oiler (all CP chip hammers)
9246 0203 65
whip hose - 10FT - 7/8” - 24 swivel & 5oz oiler (TEX 317-419)
9246 0203 66
lubricator comp /4” NPT - 5oz
9246 0203 69
lubricator comp 3/4” NPT - 8oz
9246 0203 64
lubricator comp 3/4” NPT - 11oz
9246 0203 68
CP Airolene Plus tool oil .5L
8099 0202 41
CP Airolene Plus tool oil 1L
8099 0202 43
CP Airolene Plus tool oil 5L
8099 0202 49
CP Airolene Plus rockdrill oil 1L
8099 0201 02
CP Airolene Plus rockdrill oil 4L
8099 0201 03
inlet swivel /8” X 24 (CP 4123/CP 4125/CP 4132)
9246 0203 70
3
7
inlet swivel 3/8” NPT (CP 4130/CP 4131)
9246 0203 71
inlet swivel - 1/2” pipe - rivet busters
9246 0203 72
coupling - 1/2” universal hose end
9246 0204 35
coupling - /4” universal hose end
9246 0204 36
coupling - 1” universal hose end
9246 0204 37
coupling - 1/2” universal female
9246 0204 38
coupling - 3/4” universal female
9246 0204 39
coupling - 1” universal female
9246 0204 40
coupling - 1/2” universal male
9246 0204 41
coupling - 3/4” universal male
9246 0204 42
coupling - 1” universal male
9246 0204 43
hose clamp- /2” 2-bolts
9246 0204 44
hose clamp-3/4” 2-bolts
9246 0204 45
hose clamp-1” 2-bolts
9246 0204 46
universal coupling gasket - 50/bag
9246 0204 82
3
1
26
safety clip
9246 0204 83
spring guard for 1/2” whip hose
9246 0204 84
whip check - hose-to-hose safety cable
9246 0204 85
whip check - hose-to-tool safety cable
9246 0204 86
Portable Compressors
Chicago Pneumatic Portable Compressors
Reliability, easy maintenance and flexibility are the main characteristics of CP Portable Compressors. The range
features proven designs with powerful engines from well-known, well-respected brands. With sound attenuated
canopies and straightforward control panels, CP Portable Compressors are quiet and easy to use.
CPS 90 PORTABLE COMPRESSORS
CPS 90
• Extremely reliable Kubota engine
• Fully galvanized canopy
• Recessed single point lifting eye
• Torsion bar suspension
• Heavy duty tires
• Folding drawbar
• Two 3/4” discharge valves
• Removable side panels
• 70 dB(a) @ 23 feet
• Curbside fuel filling
• Filter maintenance indicator
CPS 90
Free air delivery
88 cfm
Working pressure
100 psi
Max unloading pressure
125 psi
Discharge valves
(2) x 3/4”
Fuel tank capacity
8.5 gallons
Engine
Kubota (Tier 3)
Horsepower
24.4
Number of cylinders
3
Cooling system
Water
Overall: Length
116 in
Height
47 in
Width
51.5 in
Weight
1,225 lbs
Danger: Compressed air should never be supplied as breathing air unless air is properly
purified for breathing. Chicago Pneumatic assumes no responsibility or liability related to the
purchaser’s/user’s breathing system.The information contained herein is general in nature
and is not intended for specific construction, installation or application purposes.
27
CPS 185 DD PORTABLE COMPRESSOR
The CPS 185 DD portable air compressor features a proven design with serviceability in mind. The wide opening
one piece canopy opens fully for excellent service access. An efficient 48 hp Deutz engine is directly coupled to
the compressor airend eliminating the need for high speed gears required by most competitors. A simple design
and 500 hour maintenance interval provide for many years of reliable service.
CPS 185 DD
•
•
•
•
•
•
•
•
•
•
500 hour service interval
Single point lifting eye
Torsion bar suspension
Heavy duty tires
Folding drawbar
Removable side panels
Fully galvanized enclosure
48 HP Deutz engine
Curbside fuel filling
Highly efficient direct drive airend
Centralized Controls
Curbside control panel with protective
shutdown for high engine temperature,
low oil pressure and high compressor
temperature.
CPS 185 DD
Free air delivery
185 cfm
Working pressure
100 psi
125 psi
Discharge valves
(2) x 3/4”
Fuel tank capacity
21 gallons
Engine
Deutz (Interim Tier 4)
Horsepower
48
Number of cylinders
3
Cooling system
Oil
Overall: Length
125 in
Height
53 in
Width
55.5 in
Weight
1,980 lbs
Danger: Compressed air should never be supplied as breathing air unless air is properly
purified for breathing. Chicago Pneumatic assumes no responsibility or liability related to the
purchaser’s/user’s breathing system.The information contained herein is general in nature
and is not intended for specific construction, installation or application purposes.
28
CPS 185 PD PORTABLE COMPRESSOR
The new CPS 185 PD portable air compressor from Chicago Pneumatic offers many features asked for by the rental
industry. The corrosion resistant galvanneal steel canopy will ensure many years of service. A compact, lightweight
design with recessed towing lights and a rear bumper provide greater maneuverability and added safety while towing.
The CPS 185 PD features a highly efficient, direct-drive airend that provides 185 cfm of compressed air while using
only a 49HP engine. The control panel and discharge valves are conveniently located at the rear of the compressor.
CPS 185 PD
• Toolbox
• Recessed towing lights
• Rear bumper
• Electric fuel gauge
• Low fuel shutdown
• Direct drive airend
• 49 HP Perkins engine
• Galvanneal steel canopy
• Single point lifting eye
• Glow plug engine preheat
• Wide opening one piece canopy
• Protective shutdown system for
high compressor temperature,
high engine temperature,
low oil pressure, low fuel level
• Folding drawbar with adjustable
jackstand and safety chains
Centralized Controls
Control panel and discharge valves are conveniently located on
the rear of the compressor. The CPS 185 PD control panel includes
an hourmeter, discharge pressure gauge, electric fuel gauge, engine
preheat actuator and rotary start switch. The control system also
provides protective shutdowns for high engine temperature, low oil
pressure, high compressor temperature and low fuel level.
CPS 185 PD
Free air delivery
185 cfm
Working pressure
100 psi
125 psi
Discharge valves
(2) x 3/4”
Fuel tank capacity
25 gallons
Engine
Perkins (Interim Tier 4)
Horsepower
49
Number of cylinders
4
Cooling system
Water
Overall: Length
125 in
Height
57 in
Width
60 in
Weight
2,375 lbs
29
CPS 375 PORTABLE COMPRESSOR
The Chicago Pneumatic CPS 375 portable air compressor provides the strength and flexibility required for today’s
demanding applications. The sturdy A-frame drawbar, mechanically controlled Perkins engine and 500 hour maintenance
intervals assure many years of dependable service. Standard features include road lights, electric fuel gauge, low fuel
shutdown and full length lockable doors. A built-in aftercooler, water separator, primary and secondary filter package is
available as an option for applications where clean, dry compressed air is critical.
CPS 375
• 500 hour service interval
• Large tool storage box
• Unloaded starting
• Glow plug engine preheat
• Dual stage water separator
• Fuel level gauge and hour meter
• Galvanneal sheet metal enclosure w/powder coat paint
• Full length lockable doors
• A-frame drawbar with adjustable pintle eye,
retractable swivel wheel and safety chains
Danger: Compressed air should never be supplied as breathing air
unless air is properly purified for breathing. Chicago Pneumatic assumes
no responsibility or liability related to the purchaser’s/user’s breathing
system.The information contained herein is general in nature and is not
intended for specific construction, installation or application purposes.
30
CPS 375
Free air delivery
375 cfm
Working pressure
100 psi
125 psi
Discharge valves
(2) x 3/4”
(1) x 11/2”
Fuel tank capacity
38 gallons
Engine
Perkins (Tier 3)
Horsepower
111
Number of cylinders
4
Cooling system
Water
Overall: Length
145 in
Height
71 in
Width
72 in
Weight
3,860 lbs
CPS 750 PORTABLE COMPRESSORS
The Chicago Pneumatic CPS 750 portable air compressor features an extremely compact, lightweight, single-axle
design. The smaller size 750 cfm compressor with mechanical surge brakes and road lights allows for easier towing
and greater maneuverability. This compressor also features centralized fluid drains for ease of maintenance;
compressor oil, engine oil and engine coolant all drain to a common point on the rear of the compressor. The
CPS 750 uses a highly efficient airend design that only requires a 200 hp Caterpillar engine to produce 750 cfm
of air. A built-in aftercooler, water separator, primary and secondary filter package is available as an option for
applications where clean, dry compressed air is critical.
CPS 750
• 500 hour service interval
• Single axle design
• Mechanical surge brakes
• Built in thermostatic bypass valve
• Large tool storage box
• Rear bumper
• Three stage fuel filters w/ water separator
• Automatic engine preheat
• Galvanneal sheet metal enclosure
w/ powder coat paint
• A-frame drawbar with adjustable pintle eye,
retractable swivel wheel and safety chains
• Triple aluminum radiators designed for optimum compressor efficiency
• Centralized fluid drain point for compressor oil,
engine oil and coolant
• Protective shutdowns for engine and compressor
CPS 750
Free air delivery
750 cfm
Working pressure
100 psi
125 psi
Discharge valves
(2) x 3/4”
(1) x 11/2”
Fuel tank capacity
76 gallons
Engine
Caterpillar (Tier-3)
Horsepower
200
Number of cylinders
6
Cooling system
Water
Overall: Length
203 in
Height
78 in
Width
78 in
Weight
6,450 lbs
31
Reciprocating Air Compressors
1.5-13HP
Features
•
•
•
•
•
•
•
•
12 Volt Electric Start and Recoil Start
Start Key / Panel
Oil Monitor
Engine Slowdown (Pilot Valve)
Fully Enclosed Belt Guard
EZ Pull Tank Drain
ASME Tank and Safety Valves
3/4” Tank Discharge Valve
Two Stage Gasoline Drive
Part Number
RCP-1330G
HP
Model
Engine
cfm
100 psi
Tank
gal.
LxWxH
inches
8090250631
9
RCP-930G
Robin
16.0
30H
45 x 19 x 38
8090250606
10
RCP-1030G
Intek
16.0
30H
45 x 19 x 38
8090250607
11
RCP-1130G
Honda
18.5
30H
45 x 19 x 45
8090250823
12.75
RCP-1230GK
Kohler
18.5
30H
45 x 19 x 45
8090250608
12.75
RCP-1230G
Kohler
25.3
30H
45 x 19 x 45
8090250609
13
RCP-1330G
Honda
25.3
30H
45 x 19 x 45
Single Stage Electric Contractor Series
Part Number
HP
Model
8090250831
1.5
RCP-1530
8090250849
2
RCP-2030
Electrics
V / Ph.
cfm
100 psi
Tank
gal.
LxWxH
inches
14
115 / 1
5.4
2x4
46 x 23 x 26
19 / 9.5
115 / 230 / 1
6.5
2x4
46 x 23 x 26
Amps
RCP-2030
Features
• Start-Stop Pressure Switch Control
• Fully Enclosed Belt Guard
• Tank Drains and Discharge Valve
Single Stage Gasoline Drive Contractor Series
Part Number
HP
Model
Engine
Starter
cfm
100 psi
Tank
gal.
LxWxH
inches
8090250856
5.5
RCP-5530
Honda
Recoil
12.4
2x4
46 x 23 x 26
8090250864
6
RCP-6030
Robin
Recoil
12.4
2x4
46 x 23 x 26
Part Number
HP
Two Stage Gasoline Drive Contractor Series
RCP-908H
Features
• Engine Slowdown (Pilot Valve)
• Engine Oil Protection
• Fully Enclosed Belt Guard Tank Drains
and Discharge Valve
• ASME Tank and Safety Valve
32
Model
Engine
Starter
cfm
100 psi
Tank
gal.
LxWxH
inches
8090250872
9
RCP-908R
Robin
Recoil
18.6
2x5
50 x 29 x 37
8090250880
9
RCP-908H
Honda
Recoil
18.6
2x5
50 x 29 x 37
8090250898
12.75
RCP-128-I
Kohler
Elec &
Recoil
25.3
2x5
50 x 29 x 37
Aftermarket
Genuine Parts
Original Parts fit the best. Only they will guarantee the original performance of your
machine.To ensure maximum working efficiency and a long lifetime every part must
conform to specific technical standards. With the use of Original Parts you are certain
about the quality, lifetime, utilized material and the impact on other components. All
these aspects are important to make the right choice for spare parts. Therefore your
best choice is an Original Part. Built to perform and designed to protect.
CP engine oils
To maintain the quality of your compressor, use
the engine oil that is designed specifically for your
compressor engine - GenOil. This genuine oil is
a combination of supreme quality oil blended with
special additives. The benefits of using GenOil are
better corrosion protection and higher oxidation
stability which results in longer oil service intervals
and optimal engine performance.
ORIGINAL PART
CP coolant
GenCool is a superior, high-quality coolant based
on a new range of organic coolants. It reduces
the operating temperature of the engine and has
anti-freeze protection up to -40°C. The long-term
corrosion protection allows for extended service
intervals. GenCool will provide your engine with
year-round protection.
Filters
CP compressor oils
GenOil is the only approved and tested oil that
meets the quality specifications for your compressor.
Our compressor oil has been thoroughly tested to
give the optimum level of protection, lengthening
the components’ life time and keeping your cost of
ownership to an absolute minimum. GenOil keeps
the heart of your machine operating at
peak performance.
Air Filters
Lubricants
Service Kits
There is no better way to protect your
investment than to use genuine parts.
CP service packs include all required
parts for scheduled maintenance, saving
you time and money. With the convenient
use of our service kits you will extend the
life of your compressor, lower your
maintenance costs and increase
your profitability.
Coolants
33
Gas-Powered Breaker
Red Hawk
Freedom of movement, zero set-up time
From the leading supplier of demolition tools comes the Red Hawk gas-powered
breaker. Tough and well designed, the Red Hawk is ideal for small jobs or for
working in remote locations.
With no compressors, hoses or cables to set up, gas-powered breakers are ideal
for smaller jobs. An impressive range of tools make the Red Hawk extremely
flexible and the 7/8” and 4 1/4” steels make for rapid penetration of concrete.
Breaking concrete
A multi-purpose tool
With a wide range of tools, you can use the Red Hawk for everything from cutting and breaking to driving and compacting. Whether you need to just break a
small patch of concrete, or drive a tent stake, you can get the job finished with
a gasoline-powered machine in the same amount of time it takes to set up a
compressor and hoses.
Use the rugged and
versatile Red Hawk to:
Cutting asphalt
Tamping
Digging
34
• break concrete
• cut asphalt
• dig
• drive posts and fences
• drive rods and spikes
• tamp and compact soil
• tamp ballast/ties
Low emissions, vibrations and noise level
Red Hawk is a modern tool that meets evolving
regulations. Equipped with a catalytic converter
and newly designed carburetor, the machine meets
tough US EPA 1 emission regulations. In addition,
a muffler has reduced the noise level from 114 dB
to 107 dB, thereby fulfilling the European Noise
Emission Directive.
Vibration-dampening handles
Easy to start
With a choke control, carburetor and
user-friendly instructions, the Red Hawk
is easy to start.
An optional guide roller makes it easier
to pull downwards to start the machine
when it is placed higher up. Order
part number 9234 0009 38.
Easy to transport
The Red Hawk weighs in at about
50 pounds. Each comes with its own
carrying case which fits easily into
the trunk of your car.
Technical data
Model
Part Number
Weight
(lb)
Length
(in)
D
(in)
Width over handles
(in)
Tool shank
(in)
Sound level
(Acc. to ISO 3744)
Vibration level
(Acc. to ISO 8662)
Red Hawk
8318 0900 00
50.5
27.3
11.0
23.0
7/8" - 4 1/4"
107 dB
4.7 m/s2
Engine
Type
185 cc 1-cylinder,
2-stroke
Power
Cooling system
Starter system
Recommended fuel
Oil type
Oil mix
Fuel capacity
Fuel consumption
Impact rate
1kW
Forced air
Recoil
starter
Unleaded
Synthetic
two-stroke oil
2% 1:50
0.31 US Gal
0.36 US Gal/hr
2600 BPM
35
Redhawk Tools
At Chicago Pneumatic, we maintain a comprehensive range of chisels so that you can select the right tool for the job. Chicago
Pneumatic chisels are among the hardest wearing on the market. A controlled heat treatment
process imparts both strength and high wear resistance to deep surface layers while maintaining a tough shock resistant central core to resist breakage.The striking face is end-milled. This
results in better contact between the piston and the tool, improved transfer of energy, as well as
less vibration and wear on both hammer and chisel.
Tools
Tool type
Working length
Tip width
Shank H 22x108 mm
(H 7/8 x 4 1/4 in)
mm
(in.)
mm
Tie tamper
390
(15 1/2)
Tie tamper
460
(18)
Tie tamper
550
(22)
90
2
Moil point
350
(14)
Moil point
480
(19)
2.0
(4.5)
3083 3229 00
3
Wide chisel
240
(9 1/2)
45
(1 3/4)
1.2
(2.7)
3083 3231 00
Wide chisel
340
(13 1/2)
45
(1 3/4)
1.4
(3.1)
3083 3230 00
Wide chisel
380
(15)
75
(3)
2.6
(5.7)
3083 3232 00
Wide chisel
450
(18)
45
(1 3/4)
2.0
(4.5)
3083 4071 00
4
Asphalt cutter
350
(14)
125
(5)
3.0
(6.5)
9245 2812 90
5
Digging chisel
280
(11)
75
(3)
2.7
(6.0)
3083 3233 00
330
(13)
120
(4 3/4)
1
6
Digging spade
7
Wedge set 29 mm
8
Ground rod driver
Weight
(7 3/4)
1 Tie tamper
(in.)
kg
(lb)
90
(3 1/2)
3.0
(6.5)
3083 3237 00
90
(3 1/2)
3.2
(7.0)
9245 2823 30
(3 1/2)
3.9
(8.5)
9245 2822 40
1.4
(3.1)
3083 3228 00
Wedge set 34 mm
195
Part number
42
(1 11/16)
3.6
(8.0)
3083 3234 00
1.5
(3.3)
9245 2813 81
2.1
(4.6)
9245 2813 51
1.2
(2.6)
3083 3241 00
9
Clay spade
350
(14)
125
(5)
3.4
(7.5)
3083 3235 00
10
Wedge chisel
380
(15)
35
(1 3/8)
2.8
(6.2)
3083 3236 00
11
Driver blank
195
(7 3/4)
55
(2 1/8)
2.5
(5.5)
9245 2822 80
12
Shank for pad
185
(7 1/4)
1.3
(2.9)
3083 3238 00
13
Tamping pad, round
175
(7)
7.5
(16.5)
3083 3252 10
14
Tamping pad, square
175
(7)
5.7
(12.5)
3083 3239 00
15
Tamper sq., compl.
16
Driver pad, round
17
Post hole driver
190
460
18
Stake driver (2.5")
19
Shank for 2.5" stake driver 228
(7 1/2)
(18)
9
175
(7)
7.0
(15.5)
3083 3240 00
100
(4)
2.5
(5.5)
9245 2817 90
Ø 40
Ø 1 1/2
4.2
(9.2)
64
2 1/2 ID
2 Moil point
4 Asphalt cutter
6 Digging spade
7 Wedge set
8 Ground rod driver
9 Clay spade
10 Wedge chisel
11 Driver blank
12 Shank for pad
13 Tamping pad, round
14 Tamping pad, square
15 Tamper sq., compl.
16 Driver pad, round
17 Post hole driver
18 Stake driver (2.5")
19 Shank for stake driver
9245 2822 31
5.0
11.0
9245 9800 50
2.1
4.6
9245 9912 41
3 Wide chisel
Accessories
Description
Part Number
20
Guide roller
9234 0009 38
21
Carrying harness
9238 2814 10
Use only authorized parts. Any damage or
malfunction caused by the use of unauthorized
parts is not covered by Warranty or Product
Liability.
20 Guide roller
21 Carrying harness
36
Hand Held Hydraulic Tools
Hand Held Hydraulic Tools
Are you saying that hydraulic tools can make my job easier?
Absolutely. Chicago Pneumatic (CP) supplies a complete
line-up – and you won’t believe how convenient, portable
and versatile they are, particularly if you travel to a new
site every day, do the job in hours and then move on.
Take the power source, for instance. Instead of towing
a heavy compressor, you have a compact, portable
hydraulic power pack.
OK, but do these tools have the power I need?
You will be pleasantly surprised. With hydraulic tools
you get raw power from the power pack directly into the
tool. They not only feel more powerful but they actually
outperform other, comparable tools. Take our 16-inch saw.
At full throttle, you have all the power of an 18 HP engine
in your hand in a tool weighing only 23 pounds.
For building renovation, highway maintenance, utilities
and all situations where portability and flexibility can save
time and effort, hydraulic tools are the solution. Use them
anywhere, independent of electric or pneumatic supply,
in all weather conditions.
Bet they cost an arm and a leg!
No. In fact, for smaller construction and rental companies,
there are major cost advantages. For instance, for the
price of one compressor/breaker combination, you can
purchase two complete hydraulic power pack/breaker
packages.
37
Power Pack
This power pack
sure looks portable!
Exactly. Why tow a large compressor to the site if you
don’t need to? The CP hydraulic power pack couldn’t
be more convenient. For site-to-site transportation, two
people can lift it into a truck. On-site, the CP power pack
can easily be wheeled around by one person.
CP hydraulic power packs are available in gasoline,
diesel or electrically driven versions, and provide portable
power for a long list of applications in the 5-10 gpm/20002500 psi range.
How are they to operate?
Couldn’t be simpler. The thermostatically controlled oil
cooler gives fast warm-up and helps prevent the hydraulic
oil from overheating. Correct working temperature is
achieved within minutes – even during the winter. The
variable flow on/off valve allows for simple tool changes
and slow start up. A gauge shows when it’s time to
change the filter.
What about fuel consumption?
Many of the power packs are equipped with Power On
Demand. This system automatically idles the engine
when the tool is not being used and speeds it up when
the tool is activated. It saves fuel and keeps noise to
a minimum.
Power packs
Engine
Weight (incl oil)
Dimensions (LxWxH)
Oil flow
Maximum pressure
Fuel capacity
HTMA Type
Hose included
Power on Demand (POD)
Oil control: engine oil
Electric start
Part number 1)
38
lb
in
gpm
psi
US gal
PAC P9
9 HP, Honda gasoline
130
23.0x20.7x26.8
5
2200
1.5
I
NO
YES
YES
NO
1807 0080 26
PAC P13
13 HP, Honda gasoline
192
27.7x23.6x29.3
5-8
2200
1.8
I / II
NO
YES
YES
NO
1807 0110 25
PAC P18
18 HP, B&S Vanguard gasoline
243
28.3x27.6x29.3
5-10
2200
1.9
I / II / RR
NO
NO
NO
YES
1807 0160 34
PAC D10
10 HP, L
ombardini diesel
256
27.7x23.6x29.3
5
2000
1
I
NO
NO
NO
YES
1807 0110 27
Hammers, Breakers
CP hydraulic breakers
– a team of real hard-hitters
Looking for flexibility – or just raw power?
Either way, you’ve found it. CP hydraulic breakers range
from flexible, lightweight models up to super heavy duty
models hitting at 103 foot pounds and delivering an average
of 1,276 blows per minute. Whatever the job, large or small,
light or heavy, CP has the right tool in its breaker line-up.
Get more done!
The slim design of CP hydraulic breakers gives a good line
of sight to the working tool point which boosts your productivity. The tools are well balanced, with no external side
bolts and protruding machine parts that can come into
contact with the operator’s body.
Quick couplings
Hoses are fitted with flat face HTMA quick release couplings
for fast and easy connections in all work situations. The
couplings are designed to help keep hydraulic systems
clean on work sites where there are large amounts of dust
and dirt.
BRK 25 D
A powerful horizontal pick hammer
Get a grip on horizontal tasks! With an impact
energy of 18 foot pounds at 2,400 blows/min.,
the BRK 25 D D-handle hammer is the powerful
choice for horizontal work in renovation, demolition
and structural alteration. The detachable front
handle, available as an optional extra, pivots
360° for optimal positioning.
Pick hammer
Shank size
Weight
Length
Oil flow
Working pressure
Return line pressure max
Vibration level (ISO 8662-5)
Impact rate (5 gpm)
HTMA class
Part number
Hex in
lbs
in
gpm
psi
psi
m/s2
blows/min
BRK 25 D
7/8 x 3 1/4
28
24
5
1000-1300
150
10.1
2400
I
1801 1746 12
39
Hammers, Breakers
BRK 40
Lightweight , multi-purpose breakers
The perfect choice for indoor and outdoor
renovation and demolition jobs, BRK 40 breakers
have an impact energy of 48 foot pounds at
1,600 blows/min. Brickwork, frozen soil, asphalt,
and concrete are no match for these tough,
lightweight breakers. Frequently chosen by
contractors and rentals, BRK 40 breakers are
also effective for tamping and compaction and
are used by railroad companies for tie tamping
applications.
BRK 55
Medium weight, multi-purpose breakers
A favorite with rental companies, BRK 55 breakers
are the ideal choice for road building and
maintenance applications. Whether it’s asphalt,
brickwork, frozen soil, or concrete, the BRK 55
gives you reliable performance. Can be used with
both 8 gpm and 5 gpm power packs.
BRK 70
Heavy-duty, multi-purpose breakers
Get the job done, fast! BRK 70 breakers are ideal
for heavier jobs in tough materials such as aphalt,
frozen soil, and reinforced concrete. They work
at a standard flow rate of 8 gpm and at 5 gpm
with a simple adjustment.
BRK 95
Super heavy-duty breakers
Handheld breakers don’t get much more
powerful than this. With an impact energy of
103 foot pounds and an impact rate of 1,275
blows/min., in some situations, the BRK 95 can
even replace small excavators with breaker
attachments. Ideal for breaking heavy asphalt,
reinforced concrete and foundations, these
powerful machines are the rugged choice for utility
construction, street maintenance, repair of water
and gas lines and general construction jobs.
Breakers
BRK 40
BRK 40 VR
BRK 55
BRK 55 VR
BRK 70
BRK 70 VR
BRK 95
BRK 95 VR
73
Weight
lbs
41
42
46
47
56
57
71
Length
in
25
25
27
27
30
30
30
30
Oil flow
gpm
5
5
8 1)
8 1)
8 1)
8 1)
8 2)
8 2)
Working pressure
psi
1300-1600
1300-1600
1500-1800
1500-1800
1500-1800
1500-1800
1500-1800
1500-1800
Return line pressure max
psi
150
150
215
215
215
215
215
215
Vibration level (ISO 8662-5) 3) m/s2
8.3
3.5
11.4
3.3
11.4
3.4
14.2
6.0
Impact rate (5 gpm)
blows/min
1600
1600
1450
1450
1270
1270
-
-
Impact rate (8 gpm)
blows/min
-
-
2160
2160
1860
1860
1150
1150
Impact rate (10 gpm)
blows/min
-
-
-
-
-
-
1500
1500
I
I
II (I) 1)
II (I) 1)
II (I) 1)
II (I) 1)
II (RR) 2)
II (RR) 2)
-
-
-
HTMA class
Part number
25x108 (1 x 4¼)
1801 3446 11
1801 3446 10
1801 3546 05
1801 3546 04
-
Part number
28x152 (1¼ x 6)
-
-
1801 3546 83
-
1801 3646 84
Part number
28x160 (1⅛ x 6¼) 1801 3446 58
-
1801 3546 63
-
1801 3646 70
1801 3646 69
-
-
Part number
32x152 (1¼ x 6)
1801 3446 60
1801 3446 59
1801 3546 65
1801 3546 64
1801 3646 73
1801 3646 72
1801 3746 85
1801 3746 74
Part number
32x160 (1¼ x 6¼) 1801 3446 62
1801 3446 61
1801 3546 68
1801 3546 67
1801 3646 07
1801 3646 06
1801 3746 09
1801 3746 08
Can be adjusted to 5 gpm
1)
40
2)
Can be adjusted to 10.5 gpm
3)
1801 3746 75
BRK 40, BRK 55 and BRK 70 measured at 5 gpm/min, BRK 95 measured at 8 gpm/min
Cut off saws, core drills
CP hydraulic saws and drills –
perfect working partners
CP cut-off saws
CP core drills
You name it, CP cut-off saws will cut it
Ideal for working in confined areas
They may be light and compact, but don’t be fooled. A CP
hydraulic cut-off saw with the right blade will cut through
concrete, asphalt and steel. With our 16-inch saw at full
throttle, you have the raw power of a gasoline powered
engine in your hand.
Take a CP hydraulic core drill with you when installing
drainage, sewer and water pipes, or cable and ventilation
ducts where large, deep holes are needed. CP core drills
are well suited for drilling concrete, masonry and asphalt
materials. They can be operated freehand or mounted in
a drill stand.
The open cutting face makes the CP cut-off saw easy
to use, even under the most demanding conditions. The
simple, direct drive configuration reduces maintenance,
especially in comparison with belt-driven saws.
A water kit is available to provide a supply of cooling water
where needed.
Cut-off saws
Weight
Oil flow
Max oil pressure
Revolutions
Circumferential speed
Blade size
Arbor hole diameter
Cutting depth when used handheld
Cutting depth when mounted in cart
HTMA Type
Part number
lb
gpm
psi
rpm
ft/s
in
in
in
in
SAW 14
21.6
5-8
2500
2500-4000
151-246
14
1
5.2
3.9
I / II
1809 0140 03
SAW 16
23.4
5-10
2500
2000-4000
138-279
16
1
6.3
4.9
I / II / RR
1809 0166 13
Hydraulic control of the drill torque helps to reduce kickback
when drill bits jam. So you’re in control, even when drilling
holes of 8 inches in diameter and above. Due to the compact
design of the CP core drill, you can easily drill holes of up
to 8 inches freehand.
Core drills
Weight
Oil flow
Length without drill
Working pressure
Revolutions
Drill diameter
Thread female (drive) 1)
HTMA Type
Part number
lb
gpm
in
psi
rpm
in
COR 5
18
5-8
16
1160 - 2500
600 - 900
2-8
½" BSP
I / II
1806 1014 54
COR 15
18
5-8
16
1160 - 2500
1500 - 2250
0.5 - 3
½" BSP
I / II
1806 1014 55
1/2” BSP male x 1 1⁄4 UNC male drive adaptor included for use of larger diameter core
bits.
1)
Water Kit
Diamond blades and core bits need a constant supply of
water to cool, flush away slurry and suppress dust. On remote sites where there is no water supply, we recommend
the CP water kit, a small pressurized water container.
Item number 3371 8090 02.
41
Water pumps, OFD and hoses
It takes more than stones and debris
to stop a CP submersible pump!
CP submersible pumps
These tools are really tough
CP hydraulic submersibles are a range of rugged
pumps for continuous pumping of water on building
sites, in flooded excavations and cellars, and similar
situations. Performance is impressive in relation to
size and weight.
The 2 inch pump handles dirty water containing
small stones and debris up to 3/8 inch. The 3 inch
CP submersible trash pump can handle rocks of up
to 2 1/2 inches in diameter!
Cooled and lubricated by the hydraulic oil, they can be
left to run dry without damage.
Water pumps
Weight
Dimensions HxW
Oil flow
Working pressure
Max working pressure
Pump head max
Pump flow max
Discharge
Solid handling up to
HTMA Type
Part number
lb
in
gpm
psi
psi
ft
gal/min
in
in
WAP 2
22.6
10.5x8.5
4-6
1400
2300
82
222
2" BSP
3/8"
I
1806 1014 41
WAP 3
28
14.2x11.8
7-10
2000
2500
105
507
3" BSP
2½"
II
1806 1014 42
Accessories – for your hydraulic tools
Oil flow divider
Reduces flow and pressure, allowing you to run tools
from hydraulic-powered carriers. Use an extension hose to
connect the oil flow divider to the tool.
Oil flow divider
Max oil flow rate
Regulated oil flow rate
HTMA Type
Part number
OFD 5
15.8
5.3 - 6.6
I
1801 1633 19
OFD 8
31.0
6.6 - 8
II
1801 1643 18
Extension hoses
Add one or two 23 ft. extension hoses and you can use
up to 69 ft. of hose without significant drop in pressure.
The hoses are fitted with flat-face, quick release couplings.
Hoses
Flat face quick couplings
HTMA class
Part number
42
gpm
gpm
ft
dimension
23
½"
I / II / RR
3371 8010 87
39
½"
I / II / RR
3371 8010 89
Working tools
Working Tools
Chicago Pneumatic Construction Equipment offers a full range of working tools
for its hand held equipment.
Flat to flat (North America)
Point to Flat (North America)
7/8 x 3 1/4 in
W (in)
Moil point
Narrow chisel
Wide chisel
1 x 4 1/4 in
L (in)
Part no.
W (in)
1 1/8 x 6 in
L (in)
Part no.
W (in)
1 1/4 x 6 in
L (in)
Part no.
W (in)
L (in)
Part no.
14
3083 4050 00
15
3083 4030 00
14
3083 3267 00
14
3083 3285 00
18
3083 4050 10
18
3083 4030 10
18
3083 4015 10
18
3083 4000 10
3083 4000 20
24
3083 4050 20
24
3083 4030 20
24
3083 4015 20
24
36
3083 4050 30
36
3083 4030 30
36
3083 4015 30
36
3083 4000 30
1
14
3083 3303 00
1 1/8
15
3083 3309 00
1 1/4
14
3083 3268 00
1 3/8
14
3083 3286 00
1
18
3083 4051 10
1 1/8
18
3083 4031 10
1 1/4
18
3083 4016 10
1 3/8
18
3083 4001 10
1
24
3083 3304 00
1 1/8
24
3083 4031 20
1 1/4
24
3083 4016 20
1 3/8
24
3083 4001 20
1
36
3083 4051 30
1 1/8
36
3083 4031 30
1 1/4
36
3083 4016 30
1 3/8
36
3083 4001 30
3
14
3083 3305 00
3
15
3083 3310 00
3
15
3083 3289 00
3
15
3083 3295 00
3
18
3083 4052 10
3
18
3083 4032 00
3
18
3083 4017 00
3
18
3083 4002 00
3
24
3083 4052 20
3
24
3083 4032 10
3
24
3083 4017 10
3
24
3073 4002 10
Wedge chisel
1 3/8
15
3083 4057 00
2
15
3083 3313 00
2
16
3083 3294 00
2
16
3083 3300 00
Digging chisel
3
14
3083 3306 00
3
15
3083 3311 00
3
15
3083 3291 00
3
15
3083 3297 00
Digging spade
4 3/4
13
3083 3307 00
4 3/4
13
3083 3312 00
5
13
3083 3292 00
5
13
3083 3298 00
Asphalt cutter
5
12
3083 4053 00
5
13
3083 4033 00
5
13
3083 3290 00
5
13
3083 3296 00
Clay spade
5
17
3083 3308 00
5
16
3083 4035 00
5 1/2
15
3083 3293 00
5 1/2
8
3083 4058 00
11
3083 4037 00
9
3083 3269 00
Shaft for pad
15
3083 3299 00
9
3083 3287 00
Tamping pad, round
7
3083 3252 10
7
3083 3252 10
7
3083 3301 00
7
3083 3301 00
Tamping pad, square
7
3083 3239 00
7
3083 3239 00
6
3083 3302 00
6
3083 3302 00
8
3083 3197 00
8
3083 3197 00
4
9245 2817 90
4
9245 2817 90
Tamping pad, square
Driver pad, round
Classification of tools
Flow
5 gpm
8 gpm
10 gpm
HTMA
I
II
RR
EHTMA
C
D
E
43
RX Hydraulic Breakers
RX Hydraulic Breakers – RX means R-eliable to the X-treme
Rugged and hard-hitting
Don’t be fooled by their attractive, streamlined designed.
RX hydraulic breakers are rugged, reliable and built to
last. They have all the power you need to get the job
done…and more. Attach the matching RX breaker to the
carrier of your choice and you can power your way through
a job in no time.
Decrease downtime, increase productivity
The innovative design of the RX line of breakers helps
decrease downtime and increase productivity. The smallto-medium sized RX models have fewer components. Only
two moving parts and no side bolts make them easier to
service, maintain and repair. The larger models feature a
power control valve to increase productivity. You can set
the breaker characteristics according to the application for
higher productivity. The larger models also feature a
cutting-edge side bolt system that uses head bolts and
insert threads to distribute the thread strain equally.
Less noise means less trouble with the
neighborhood on the job site
Thanks to the RX recoil absorbing concept and the
polyurethane insulated breaker box system, RX breakers
are among the quietest you can buy and in line with
outdoor equipment directive 2000/14/EU.
RX hydraulic breakers (RX2 – RX22)
Traditional breaker with 4 side bolts and nuts
With the exception of the RX11, these RX breakers have fewer
components. Only two moving parts and no high pressure
accumulator mean less chance of failure. No side bolts make
them easier to service, maintain and repair since a multi torque
wrench isn’t needed.
The decades old traditional hydraulic breaker technology is
complex with many parts.
RX hydraulic breakers (RX25 – RX53)
The RX25-RX53 models feature a cutting-edge side bolt system
that uses head bolts and insert threads to distribute the thread
strain equally.
44
Value-for-money features
Power booster – for maximum performance
The power booster feature on RX breakers enables you
to get higher breaking performance without increasing the
hydraulic input in tougher breaking applications. While the
impact energy remains constant, the breaker increases
the blow frequency, which results in increased percussive
performance.
Power Stop function – to protect your
investment
The power stop function reduces blank firing. That protects
the breaker and carrier and increases the working life of
the components.
Power control valve – to increase productivity
Hybrid
technology
(gas/oil)
Highly efficient
internal control
valve
RX breakers (from RX25 upwards) are equipped with a
power control valve. This feature enables the operator to
set the breaker characteristics according to the application
– for higher productivity.
High impact, low noise
RX breakers comply with current and future regulations
stipulated in the Noise Emission of Outdoor Equipment
Directive 2000/14/EC.
Smart design
with few
components
No side bolts (RX2 – RX22)
The lack of side bolts on the RX2 – RX22, excluding the
RX11, makes these breakers more reliable and easier to
service and maintain. Opening a breaker for resealing can
be done with ordinary hand tools.
Cutting edge side bolts system (RX25 – RX53)
The innovative side bolt system uses head bolts and insert
threads to distribute the thread strain equally.
Dust wiper
The optional dust wiper, available on the RX14 upwards,
helps increase the lifetime of components that can wear.
Simple and reliable -- it keeps abrasive dust out and
grease in.
CP-Lube – automatic lubrication
Power stop
function
Ventilation
port
CP-Lube
for optimum
lubrication
Effective noise
and vibration
damping
Power control
valve
High performanceto-weight ratio
Double tool
retainer bars
(RX14 – RX53)
Dust wiper
Power booster
Breaker models from the RX14 upwards can be equipped
with optional automatic lubrication. CP-Lube ensures
optimal lubrication of the wear bushings and the working
tool and thus avoids unnecessary downtime.
45
Innovative technology;
reliable service and support
A respected name for more than 100 years
Since 1901 the Chicago Pneumatic name has
represented high-performance tools and equipment
designed for an extensive range of applications. Today,
Chicago Pneumatic has a global reach, with local
customer centers around the world.
Extensive investments in R&D
The innovative technology, unique design and value-formoney features of the RX hydraulic breaker line are the
direct result of our extensive investments in R&D.
Worldwide customer support
Buying an RX breaker is just the beginning. Chicago
Pneumatic distributors offer reliable service and support.
Genuine spare parts for your RX breaker are available
worldwide, with short delivery times.
46
Thirteen breakers at your service
Model
Service weight
Carrier weight class
Operating pressure
Oil flow rate
Blow
frequency
Working tool
diameter
Sound
power level
Part no.
kg
lb 1)
t
lb 2)
bar
PSI
l/min
gpm
bpm
mm
in
dB(A)
RX2
117
258
1,3-3,0
2,900-6,600
110-130
1,600-1,890
15-35
4-9
560-1700
42
1.65
109 4)/81 5)
8460 0500 38
RX3
166
366
2,1-4,5
4,600-9,900
110-140
1,600-2,030
30-50
8-13
670-1450
52
2.04
111 4)/83 5)
8460 0500 39
RX4
233
514
2,9-6,0
6,400-13,200
110-140
1,600-2,030
35-60
9-16
520-1150
62
2.44
113 4)/85 5)
8460 0500 40
RX6
284
626
4,2-9,0
9,300-19,800
110-140
1,600-2,030
45-75
12-20
530-1150
70
2.75
114 4)/86 5)
8460 0500 41
RX8
380
838
5,2-12,0
11,500-26,500
120-150
1,740-2,180
60-90
16-24
530-1050
80
3.14
115 4)/87 5)
8460 0500 42
RX11
550
1,210
9-15
19,800-33,100
120-150
1,740-2,180
70-100
18-26
590-1100
80
3.14
116 4)
3363 1095 21
RX14
800
1,760
10-17
22,000-37,500
150-170
2,180-2,470
100-120
26-32
650-850
100
3.93
3363 1049 61
RX18
1200
2,650
15-24
33,100-52,900
150-170
2,180-2,470
120-140
32-37
550-720
120
4.72
3363 1052 39
RX22
1500
3,310
17-28
37,500-61,700
150-170
2,180-2,470
140-160
37-42
520-680
135
5.31
3363 1051 01
RX25
1800
3,970
20-33
44,100-72,800
150-170
2,180-2,470
130-180
34-48
400-680 (460800) 3)
140
5.51
3363 1056 01
RX29
2200
4,850
25-40
55,100-88,200
150-170
2,180-2,470
150-200
40-53
375-600
(400-800) 3)
150
5.90
3363 1058 93
RX45
3000
6,610
29-46
63,900-101,400
160-180
2,320-2,610
210-260
55-69
380-580
(400-800)3)
165
6.49
RX53
4200
9,260
40-70
88,200-154,300
160-180
2,320-2,610
250-320
66-85
350-560
(400-800)3)
180
7.08
121 4)/91 5)
3363 1053 59
3363 1097 39
1) Breaker and breaker box with standard adapter plus working tool.
2) Weights apply to standard carriers only. Any variances must be approved by Chicago Pneumatic and/or the carrier manufacturer prior to attachment.
3) Power Control: The blow frequency and impact energy can be adjusted to better meet the application requirements.
4) Sound power level guaranteed.
5) Sound pressure level (r=10m).
Important: EN ISO 3744 in accordance with directive 2000/14/EC. Full details of measurement are available in the Safety and Operating Instruction
of the product.
RX hydraulic breakers – features at a glance
Optional extras
• Hybrid technology (gas/oil)
• Innovative design with less components
• Effective noise and vibration damping
• Highly efficient internal control valve
• Power booster
• Power stop function
• Power control valve (RX 25-53)
• Ventilation port*
• Dual retainer bars*
• CP-lube for optimum grease distribution*
• Dust wiper*
* From RX14 upwards
47
Original parts make your breaker even more effective
Working tools
Poor quality tools can prove to be
expensive. Pieces of low grade metal
can shear off, enter the hydraulic
system and cause serious damage to
the breaker and carrier.
Chicago Pneumatic tools are
manufactured to the highest quality
standards in a fully controlled process.
All tools are made from a nickel-chrome
alloy that has been optimized for breaking
applications. Each tool is precision
formed and temper hardened for greater
wear resistance.
Model
RX2
Chisel paste
Size
Part no.
30 x 500 g
3363 0949 10
Description
Chisel paste cartridge
(for CP-Lube)
RX3
RX4
Moil point
RX6
RX8
Chisel
RX11
RX14
Blunt tool
RX18
Wide chisel
RX22
RX25
Asphalt cutter
RX29
RX45
RX53
48
Tool type
Moil point (conical)
Working length
265 mm
10,43 in
Total length
425 mm
16,73 in
Part no.
4211 1050 01
Chisel (cross)
265 mm
10,43 in
425 mm
16,73 in
4211 1050 02
Blunt tool
265 mm
10,43 in
425 mm
16,73 in
4211 1050 03
320 mm
12,60 in
530 mm
20,87 in
4211 1051 01
Chisel (cross)
320 mm
12,60 in
530 mm
20,87 in
4211 1051 02
Blunt tool
320 mm
12,60 in
530 mm
20,87 in
4211 1051 03
350 mm
13,78 in
590 mm
23,23 in
4211 1052 01
Chisel (cross)
350 mm
13,78 in
590 mm
23,23 in
4211 1052 02
Blunt tool
350 mm
13,78 in
590 mm
23,23 in
4211 1052 03
380 mm
14,96 in
665 mm
26,18 in
4211 1053 01
Chisel (cross)
380 mm
14,96 in
665 mm
26,18 in
4211 1053 02
Blunt tool
380 mm
14,96 in
665 mm
26,18 in
4211 1053 03
415 mm
16,34 in
745 mm
29,33 in
4211 1054 01
Chisel (cross)
415 mm
16,34 in
745 mm
29,33 in
4211 1054 02
Blunt tool
415 mm
16,34 in
745 mm
29,33 in
4211 1054 03
4211 1054 01
390 mm
15,35 in
745 mm
29,33 in
Chisel (cross)
390 mm
15,35 in
745 mm
29,33 in
4211 1054 02
Blunt tool
390 mm
15,35 in
745 mm
29,33 in
4211 1054 03
495 mm
19,49 in
895 mm
35,24 in
4211 1055 38
Chisel (cross)
495 mm
19,49 in
895 mm
35,24 in
4211 1055 39
Blunt tool
495 mm
19,49 in
895 mm
35,24 in
4211 1055 36
540 mm
21,26 in
995 mm
39,17 in
4211 1055 33
Chisel (cross)
540 mm
21,26 in
995 mm
39,17 in
4211 1055 34
Blunt tool
540 mm
21,26 in
995 mm
39,17 in
4211 1055 31
565 mm
22,24 in
1050 mm
41,34 in
4211 1055 27
Chisel (cross)
565 mm
22,24 in
1050 mm
41,34 in
4211 1055 28
Blunt tool
565 mm
22,24 in
1050 mm
41,34 in
4211 1055 25
585 mm
23,03 in
1115 mm
43,90 in
4211 1055 03
Chisel (cross)
585 mm
23,03 in
1115 mm
43,90 in
4211 1055 04
Blunt tool
585 mm
23,03 in
1115 mm
43,90 in
4211 1055 01
590 mm
23,23 in
1225 mm
48,23 in
4211 1055 09
Chisel (cross)
590 mm
23,23 in
1225 mm
48,23 in
4211 1055 10
Blunt tool
590 mm
23,23 in
1225 mm
48,23 in
4211 1055 07
670 mm
26,38 in
1365 mm
53,74 in
4211 1055 15
Chisel (cross)
670 mm
26,38 in
1365 mm
53,74 in
4211 1055 16
Blunt tool
670 mm
26,38 in
1365 mm
53,74 in
4211 1055 13
4211 1055 21
735 mm
28,94 in
1500 mm
59,06 in
Chisel (cross)
735 mm
28,94 in
1500 mm
59,06 in
4211 1055 22
Blunt tool
735 mm
28,94 in
1500 mm
59,06 in
4211 1055 19
Carrier classes
RX2
200
200
ft/lb class
RX3
400
400
ft/lb class
RX4
550
550
ft/lb class
750
RX6
750
ft/lb class
RX8
1,000
1,000
ft/lb class
RX11
1,200
1,200
ft/lb class-
RX14
2,000
2,000
ft/lb class
RX18
2,500
2,500
ft/lb class-
RX22
3,500
3,500
ft/lb class
RX25
4,500
4,500
ft/lb class
RX29
5,000
5,000
ft/lb class
RX45
7,500
7,500
ft/lb class
RX53
10,000
00)
4,3
00)
70
(15
7,7
00)
67
(14
1,0
00)
64
(14
4,5
00)
61
(13
7,8
00)
58
(12
1,2
00)
55
(12
4,6
00)
8,0
52
(11
00)
49
(10
0)
1,4
,30
46
(10
0)
43
(94
,20
0)
40
(88
,50
0)
37
(81
,00
0)
34
(75
,30
0)
31
(68
,70
0)
28
(61
,10
0)
25
(55
,50
0)
22
(48
,90
0)
19
(41
,30
0)
16
(35
,60
0)
13
(28
,00
0)
10
(22
,40
)
7
(15
(2,
4
800
(lb)
)
1
(8,
ton
200
10,000
ft/lb class
49
Generators
CPG 25- CPG 120
Reliability, versatility and rugged design are
the main characteristics of CPG Generators.
The range features proven designs with powerful
engines from well-known, well-respected brands.
With Zincor steel coated canopies and 500 hour
service intervals. Chicago Pneumatic generators
can power a wide variety of critical applications
even in the most demanding weather conditions.
Model
CPG 25
CPG 45
CPG 70
CPG 90
CPG 120
Rated Standby Power
22kW/28kVA
39 kW / 50 kVA
67 kW / 84 kVA
80 kW / 100 kVA
106 kW / 133 kVA
Rated Prime Power
20 kW / 25 kVA
35 kW / 45 kVA
56 kW / 70 kVA
72 kW / 90 kVA
95 kW / 120 kVA
Voltage Selections - 3Ø
208 / 240 / 480
208 / 240 / 480
208 / 240 / 480
208 / 240 / 480
208 / 240 / 480
Voltage Selections - 1Ø
120 / 240
120 / 240
120 / 240
120 / 240
120 / 240
Amperage Capacity @ 120 volts 1Ø
2 x 72 amps
2 x 116 amps
TBD
2 x 250 amps
2 x 333 amps
72 amps
116 amps
TBD
250 amps
333 amps
69 amps
116 amps
TBD
250 amps
330 amps
60 amps
100 amps
TBD
216 amps
288 amps
30 amps
50 amps
TBD
108 amps
144 amps
Sound Pressure Level @ 23 feet @ 75% load
65 dB(A)
68 dB(A)
67 dB(A)
67 dB(A)
67 dB(A)
Fuel Tank Capacity
30 gal.
70 gal.
160 gal.
160 gal.
160 gal.
Fuel Consumption At 75% Load
1.04 gl/hr
1.9 gl/hr
TBD
4.9 gl/hr
5.9 gl/hr
Fuel Autonomy At 75% Load
29 hr
36 hr
TBD
32.6 hr
27.1 hr
Kubota
Kubota
John Deere
John Deere
John Deere
Model
Kubota2403
V3600T
4045HF285
4045HF285
4045HF285
Rated Speed
1800 rpm
1800 rpm
1800 rpm
1800 rpm
1800 rpm
Emission Compliance
EPA Interim Tier 4
EPA Interim Tier 4
EPA Tier III
EPA Tier III
EPA Tier III
Rated Output
29.6 HP @ 1800 rpm
49 HP @ 1800 rpm
99 HP @ 1800 rpm
126 HP @ 1800 rpm
158 HP @ 1800 rpm
Coolant
Water / Glycol
Water / Glycol
Water / Glycol
Water / Glycol
Water / Glycol
Cylinders
4
4
4
4
4
Displacement
2.4 L
3.6 L
4.5 L
4.5 L
4.5 L
Engine Control
Electronic
Mechanical
Electronic
Electronic
Electronic
Alternator
Leroy Somer
Stamford
Stamford
Stamford
Stamford
Model
LSA40M5
BCI184-H
TBD
UCI 224 G1
UCI 274 C1
Degree of Protection / Insulation Class
IP23 / H
IP23 / H
IP23 / H
IP23 / H
IP23 / H
Dimensions Skid (L x W x H)
70 x 33.5 x 46.4 in
82.7 x 37.5 x 53 in
112 x 44 x 67 in
112 x 44 x 67 in
112 x 44 x 67 in
Weight - Skid Wet
1,868 lbs
2,410 lbs
5,310 lbs
5,310 lbs
5,360 lbs
Dimensions w/Trailer (L x W x H)
110 x 59 x 57 in
136.2 x 62.6 x 80.1 in
176 x 78 x 80 in
176 x 78 x 80 in
176 x 78 x 80 in
Weight - w/Trailer Wet
2,121 lbs
3,162 lbs
6,560 lbs
6,560 lbs
6,610 lbs
20 amp - 125 volt GFCI duplex
2
2
2
2
2
50 amp - 125 / 250 volt twist lock
2
2
2
2
2
Engine
Convenience Receptacles
50
Generators
CPG 45
The CPG 45 portable generator from Chicago Pneumatic
provides quieter operation, reduced emissions, and lower
acquisition and operating costs. Applying insights gained from
industrial customers, rental companies, public utilities, and other
end users, Chicago Pnuematic engineers designed the CPG 45
with the most desirable features and capabilities:
Standard Features
•
•
•
•
Multi-Voltage Selector Switch
Remote Start / Stop
Digital Control System
110% Fluid Containment
Optional Features
• Diesel power from the reliable Kubota engine
• Electrical power from Stamford BCI series alternator
• Selectable 3-phase and 1-phase voltages
• 24 hour run-time fuel capacity inside the base frame
• 14 gauge galvanneal steel canopy for high durability
• Spillage free frame for environmental protection
• 120V single phase on the duplex in any voltage condition
•
•
•
•
•
•
•
•
•
Skid-Mount
Battery Charger
Electronic Governor
Coolant Heater
Ball Coupling
Spare Tire
Rear Stabilizer Jacks
Tool Box
External Fuel Connections
CPG 120 (60 Hz)
Standard Features
•
•
•
•
•
Multi-Voltage Selector Switch
Remote Start / Stop
Digital Control System
110% Fluid Containment
Electronic Governor
Optional Features
•
•
•
•
•
•
•
Skid-Mount
Battery Charger
Ball Coupling
Spare Tire
Tool Box
External Fuel Connections
Coolant Heater
Health, Safety and Environment
Chicago Pneumatic’s stringent manufacturing
standards follow ISO 9001 quality assurance
regulations. All components are produced and tested
to exacting standards for optimum performance in the
most demanding conditions.
51
Over 100 years of experience
Since 1901 the name Chicago Pneumatic has stood for innovative,
high-performance power tools. Today a wide range of pneumatic
and hydraulic construction tools, including breakers, clay diggers,
picks and busters, scabblers, rock drills, rotary and chipping
hammers, sump and sludge pumps, and a whole lot more, are
available through a worldwide sales organization.
Working tools
W (in)
Moil point
Narrow chisel
© 2011 Atlas Copco Construction Mining Technique USA LLC.
9245 9998 12c 2/11 5,000
Wide chisel
Wedge chisel
Digging chisel
Digging spade
Asphalt cutter
Clay spade
Shaft for pad
Tamping pad, round
Tamping pad, square
Tamping pad, square
Driver pad, round
1
1
1
1
3
3
3
1 3/8
3
4 3/4
5
5
7
7
4
More than
years
of experience
Flat to100
flat (North
America)
Point to Flat (North America)
Chicago
and selling
7/8
x 3 1/4 inPneumatic Tool Company
1 x 4 has
1/4 inbeen designing, manufacturing
1 1/8 x 6 in
1 1/4 x 6 in
Lpneumatic
(in)
Part
no. sinceW
(in) Today
L (in) we offer
Partano.
W (in)of products
L (in) including
Part no.
W (in)
L (in)
Part no.
tools
1901.
wide range
14neumatic
3083 and
4050 hydraulic
00
15 clay3083
4030 00
14 scabblers,
3083 3267
14
3083 3285 00
p
breakers,
diggers,
picks and busters,
rock00
18
3083 4050
18
3083 and
4030 sludge
10
18 a whole
3083 lot
4015
10
18
3083 4000 10
drills,
rotary
and10
chipping hammers,
sump
pumps, and
more.
24
3083
4050up
20 in the city that
24shares
3083
20 today Chicago
24 Pneumatic
3083 4015
24
3083 4000 20
Having
started
our4030
name,
is a20
36
3083
4050 30with sales organizations
36
3083
4030 30the world.
36
3083 4015 30
36
3083 4000 30
global
company,
around
14
3083 3303 00
1 1/8
15
3083 3309 00
1 1/4
14
3083 3268 00
1 3/8
14
3083 3286 00
18
3083 4051 10
1 1/8
18
3083 4031 10
1 1/4
18
3083 4016 10
1 3/8
18
3083 4001 10
24
3083 3304 00
1 1/8
24
3083 4031 20
1 1/4
24
3083 4016 20
1 3/8
24
3083 4001 20
36
3083 4051 30
1 1/8
36
3083 4031 30
1 1/4
36
3083 4016 30
1 3/8
36
3083 4001 30
14
3083 3305 00
3
15
3083 3310 00
3
15
3083 3289 00
3
15
3083 3295 00
18
3083 4052 10
3
18
3083 4032 00
3
18
3083 4017 00
3
18
3083 4002 00
24
3083 4052 20
3
24
3083 4032 10
3
24
3083 4017 10
3
24
3073 4002 10
15
3083 4057 00
2
15
3083 3313 00
2
16
3083 3294 00
2
16
3083 3300 00
14
3083 3306 00
3
15
3083 3311 00
3
15
3083 3291 00
3
15
3083 3297 00
13
3083 3307 00
4 3/4
13
3083 3312 00
5
13
3083 3292 00
5
13
3083 3298 00
12
3083 4053 00
5
13
3083 4033 00
5
13
3083 3290 00
5
13
3083 3296 00
17
3083 3308 00
5
16
3083 4035 00
5 1/2
15
3083 3293 00
5 1/2
15
3083 3299 00
8
3083 4058 00
11
3083 4037 00
9
3083 3269 00
9
3083 3287 00
3083 3252 10
7
3083 3252 10
7
3083 3301 00
7
3083 3301 00
3083 3239 00
7
3083 3239 00
6
3083 3302 00
6
3083 3302 00
8
3083 3197 00
8
3083 3197 00
9245 2817 90
4
9245 2817 90
Classification of tools
Flow
HTMA
EHTMA
5 gpm
I
C
8 gpm
II
D
10 gpm
RR
E
Chicago Pneumatic Construction Equipment 3700 East 68th Avenue Commerce City, CO 80022 USA Tel: (800) 760-4049 Fax: (303) 288-8828
3392 5195 93a 2500 12/08 Copyright 2008, Chicago Pneumatic Construction Tools Subject to technical modifications.
For more detailed information, please contact:
www.cp.com

Chicago Pneumatic Tools - Air Tool Parts for All Makes and Models

Transcription

Similar documents

8 Series Line Chart_611

PSI Presentation - Peaceful Schools International

Golden Cogwheel V37I1 - Psi Upsilon Society of Georgia

Chisels - Irwin Tools

an outline of the evolution of pneumatic structures - LMC

1" Impact Wrench - Racine Railroad

Weekly 10-10-14

series 400 technical details

Chisels - Irwin Tools

MetroCount 5600 Vehicle Classifier System