Femco Powerpoint

No-Spill Systems Inc.
(888)466-7745 Ext 26
info@nospillsystems.com
bob@nospillsystems.com
(888)466-7745 Ext.21

Remove factory plug and
clean the threads in the
oil pan
Use a torque wrench to
install the No-Spill drain
plug to the torque specs
on the packaging
 Standard Design System



Remove the dust cap
The No-Spill valve
remains closed


Connect the drainer
Let the fluid drain
 Made from solid brass to produce accurate threads and
sealing.
 Viton O-rings are used for fluid sealing, and stainless steel is
used for the spring.




Over 1500 sizes and thread combinations
including UNF, UNS, Metric, BSP, NPT
Sizes ranges from 12mm to 2 inches
(Custom sizes are available based on qty.)
Available for all makes and models of
engines, transmissions, reefer units( TK &
Carrier),hydraulic tanks, and fuel tanks.
Simply provide engine and/or equipment
list and we will provide the appropriate part
numbers.
KENWORTH NORTHEAST GROUP, INC.
Standard Design System
STANDARD DESIGN
DRAIN PLUG
Drainer threaded onto
Drain Plug
STANDARD 1002
DRAINER
USE PREFIX “ C” IF CUSTOMER
WANTS A CHAIN
1002
3 DRAINER
OPTIONS
1046
1004
1009C
Thread on to
Drain Plug
Attach
your
suction
hose
SC3040
1016
Use the above parts when your customer has
the Standard Design drain plugs and wants to
hook up to a vacuum system.
Todd P. McGuire
Vice President Parts Sales
Kenworth Northeast
Cell: (413) 214-8822
Office: (413) 245-7597
Fax: (781) 341-7252
Email: tmcguire@kenworthne.com
Website: www.kenworthne.com
KENWORTH NORTHEAST
GROUP, INC
Speed Click System
Speed click Drain plug
SC3044 Clicker
Engaged into Plug
This is commonly used
as Gravity Drain
SC3094 Clicker with SC3040
Non Return Valve set up for a
Vac system
Optional Drainers
for Speed Click
Gravity
Drain
SC3046
Clicker
SC3096 Clicker
SC3048
Clicker
For Vac
Systems
SC 3098 Clicker
Plug and Sampler
Oil Sampler
HOW TO OBTAIN A OIL SAMPLE
Plug and Sampler
attached
Plug and Sampler
attached showing the
valve being opened
•Warm up the engine to operating temperature, then turn off.
•Remove the dust cap from the No-Spill Systems drain plug.
•Thread the sampler onto the bottom of the No-Spill Systems
drain plug.
•When the sampler is attached to the No-Spill Systems drain
plug, the valve will open slightly to release a small amount of oil
to be collected as the sample.
•Detach the sampler when you have enough oil by unscrewing it
from the No-Spill Systems Drain plug. The valve will return to the
"closed" position.
•Replace the dust cap to the No-Spill Systems drain plug.





Use any of the 3 No-Spill Designs with a
vacuum or suction system
Use Sampler for quick Oil Sampling
Cap Chains are available on all Standard
and Speed Click plugs
Dust Caps and Extender Drainers are
available for “hard to reach” applications
Magnets are available on Compact Design
plugs (they are already on Standard and
Speed Click)
•No-Spill™ Systems has been in the business of fluid draining
technology for over 27 years, manufacturing high quality products that
make changing fluids easier, safer in addition to helping our
environment by eliminating oil spills.
•Our products come with a lifetime warranty.
•All of our parts are made in North America. In fact, the brass used in
our manufacturing process is sourced in Ohio by Americans.
•We are ISO 9001 certified and NAFTA approved