Lindberg/Hawk 2009

Transcription

Lindberg/Hawk 2009

2009
New & Current
RELEASES
©2009 J. Lloyd International, Inc. • 4520 20th Ave. SW • Cedar Rapids, IA 52404
(319) 390-8888 • FAX (319) 390-8896 • www.lindberg-models.com • www.hawkmodels.com
Engines Kits
11081 Ford Flathead Engine 1/6 scale
Unassembled Model Kit
The Ford flathead V8 includes over 60 highly detailed parts
• Rubber belts connect moving parts
• Parts are prepainted
• Perfectly detailed engine components
11083 Ford Model T Engine 1/6 scale
Unassembled Model Kit
The original engine that powered the cars and started the
revolution in U.S. transportation. Replicated here in exact detail.
• Parts are prepainted
• Perfectly detailed engine components
11090 1948 Transparent Ford Flathead V8 Engine
Unassembled Plastic Model Kit 1/4 th scale
A working model of the famous Ford Flathead V8 Engine,
complete with motor sound recorded from an operating engine
• Fully visible working valves, pistons and crankshaft
• Electric drive motor powered by three AA batteries (not included)
• Over 170 parts
• Motor sound has been recorded off of
a real operating engine
• Detailed parts come prepainted
• Display stand included
MOTOR
SOUND!
(recorded
from a real
engine)
6
www.lindberg-models.com • www.hawkmodels.com
©2009 J. Lloyd International, Inc. • 4520 20th Ave. SW • Cedar Rapids, IA 52404 • (319) 365-5842 • FAX (319) 365-5902
Preassembled Engines and Kits
For the collector that does not have the time to build, these two
engines are offered prepainted and preassembled.
11082 1948 Ford Flathead 1/6 scale
Preassembled Model
11084 Ford Model T
Preassembled Model
Dodge HEMI® Engine Kits
1/4 scale precision diecast replicas that may
include over 125 parts.
Features include
• Diecast crankcase with plastic parts
• Crankshaft that rotates
• Display base
11055 A990 Race Dodge
HEMI® Kit 1/4 scale
11053 426 Street Version
Dodge HEMI® Kit 1/4 scale
11057 426 Super Stock
Dodge HEMI® Kit
1/4 scale
7
Coca-Cola® Officially Licensed Kits & Train
The World’s Number One Licensed Brand.
Now available in a select line of 1/24th scale plastic model kits from Lindberg.
72201 Dodge Little Red Coke® Pickup Kit
1/24th scale
72198 Coke® ‘34 Ford Pickup Kit
1/24th scale
73078 Coke® ‘69 Dodge L-700
with Box Trailer and Load Kit
1/24th scale
32014 Coca Cola® Holiday Express Collector’s G-scale Train Set
•
•
•
•
•
•
Fully Assembled Collectible
Heavy Die-cast Engine with Working Headlight and Smokestack
Tender Car with Removable Load and Side rails
Box Car • Gondola • Caboose
Flat Car with Buddy “L” Delivery Truck
20 Piece Combination Snap-Fit Track 12 Curved and 8 Straight Track included
©The Coca-Cola Company. COCA-COLA, COKE, the Contour Bottle design, the Red Disc Icon, the Dynamic Ribbon
device and the COCA-COLA Santa are trademarks of The Coca-Cola Company. All rights reserved.
Final graphics and product specs are subject to change pending the approval of The Coca-Cola Company.
*
8
Cars and Trucks
Unassembled Plastic Model Kits Scale noted
72133 ‘34 Ford Coupe 1/32
72134 ‘30 Ford Model A Pickup 1/32
72140 ‘40 Ford Convertible 1/32
72135 ‘52 Chevy® Fastback 1/32 scale
72137 ‘37 Chevy® Convertible 1/32 scale
72138 ‘57 Chevy® Ragtop 1/32 scale
72139 ‘32 Chevy® Pickup 1/32 scale
11
Cars & Vintage Racers
72141 ‘49 Ford Tudor 1/32
72142 ‘36 Ford Roadster 1/32
72146 ‘25 Ford T Street Rod 1/32
72147 1915 Ford Couplet 1/32
72148 ‘32 Lincoln Convertible 1/32
72150 ‘32 Ford B Roadster 1/32
72337 1914 Stutz Racer 1/16 scale
12
72338 1914 Mercedes Racer 1/16 scale
www.lindberg-models.com • www.hawkmodels,com
Cars & Trucks
Unassembled Plastic Model Kits
This authentic 1/24 scale model of the 1929 Mercedes
Benz SSK, has a removable hood and features chrome
plated parts, clear plastic windshield and headlights,
rubber-like tires and comes molded in three colors.
72326 1929 Mercedes Benz SSK 1/24
73050 California Custom Chevy®
Pickup 1/24 scale
72158 Dodge “Little Red Wagon”™ 1/25
72177 Ford F-150 Off Road 4x4 1/25
72149 Ford F-150 Flareside 4x4 1/25
73073 Peterbilt® 359 1/20 scale
13
Big Rigs
73077 L700 with Crushed Cars 1/25 scale
73068 ‘69 Dodge L-700 Tilt Cab™ , Flat Bed Trailer, and 40 Ford Coupe 1/25
73074 Chrome Tanker with Cab 1/25 scale
14
Scale noted
73067 ‘69 Dodge L-700
Tilt Cab 1/25
73060 Flat Bed Trailer 1/25 scale
73061 Semi Trailer 1/25 scale
73071 L-700 Tilt Cab with
Box Trailer and Cargo Boxes
1/25
73072 Skelly Tanker
with Cab 1/25 scale
15
Cars & Trucks
73039 Competition Coupe Dragster 1/8 scale
OVER
TWO FEET
LONG!
Build 1 0F 3 WAYS!
72155 ‘34 Ford Custom Pickup 1/25
72156 ‘64 Dodge “Color Me Gone” 1/25
72161 ‘64 Dodge “Ramchargers” 1/25
72163 ‘61 Impala®SS409® Hardtop 1/25
16
Cars
Build 1 0F 3 WAYS!
72165 ‘32 Ford Roadster (3 in 1) 1/25
72166 Cougar II 1/25
72169 Mustang II 1/25
72171 ‘67 Oldsmobile® 442®W-30® 1/25
72174 ‘64 Dodge “Maverick”™ 1/25
72175 Don Nickolson’s Impala® 1/25
72179 1929 Custom Rod 1/25
72181 ‘66 Chevy® Chevelle™SuperSport®1/25
17
Cars
72162 San Francisco Cable Car 1/25
18
72151 ‘71 Ford Mustang 1/25
72176 ‘64 Dodge 330 1/25
72182 ‘61 Impala® Convertible 1/25
72183 ‘64 Plymouth Belvedere 1/25
72712 Chrysler Atlantic 1/25
73069 1972 Dodge Challenger 1/25
Cars and Trucks
72195 ‘53 Ford Convertible 1/25
72196 ‘25 Ford 5 Window Tall T 1/24
72321 ‘53 Ford Indy Pace Car
Convertible 1/25
72323 ‘37 Cord Convertible 1/25
72322 ‘48 Lincoln Continental 1/25
72331 ‘34 Ford Roadster Pickup 1/24
72330 ‘32 Ford Pickup 1/24
72325 ‘31 Bugatti Royal Victoria 1/24
19
Cars and Trucks
72324 ‘35 Auburn Convertible 1/25
72332 1910 Ford Model T 1/16
72335 AMC Gremlin Grabber 1/20
72334 Ford Custom Model “T” Pickup 1/24
72714 Dodge Dakota Sport Pickup 1/25
72197 LaFrance 900 Series
Pumper 1/32
The American LaFrance Company was
started around 1872 by Asa and Truckson
LaFrance. The American LaFrance 900 Series Custom Pumper was built at the Elmira
New York Plant. The standard 900 Pumper
comes equipped with twinflow pumps
rated at 750 gallons/minute. It’s a complete
one-man “nerve center” control panel.
20
Highly Detailed Car Kits
These model kits are for the experienced builder and feature
• Detailed chassis
• Chrome plated parts
• Vinyl tires
• Detailed interior
73063 1937 Ford Custom Convertible 1/24
73051 1938 Ford Custom Coupe 1/24
73064 1938 Ford Custom Van 1/24
73065 2008 Dodge Super Bee 1/24
21
Ford Crown Victoria Police Cars
1/25th scale Unassembled Plastic Model Kits
The Crown Victoria sedan was completely
redesigned by Ford in 1992 and production
continued into 1997.
72715 Unmarked;Design Your Own 1/25
22
72776 Illinois State Police 1/25
72777 California Highway Patrol 1/25
72778 Tennessee State Police 1/25
72779 North Carolina Police 1/25
72780 Alabama State Police 1/25
72781 Georgia State Police 1/25
Dodge Charger Police Cars
• Fully detailed engines, chassis and pushbar
• Complete police interiors including computer
and restraining or passenger barrier
• Complete set of decals on decorated versions
72796 Undecorated Dodge Charger
ALL EIGHT LIGHT BARS INCLUDED
Code 3-360
Tomar - “The Blade”
Code 3-Javelin
Vector (V-bar)
Code 3-MX 7000
Whelen Edge Ultra
Federal Signal-Arjent
Whelen Patriot LED
72782 North Carolina State Patrol 1/24
72783 Illinois State Patrol 1/24
72784 Florida State Patrol 1/24
72785 Texas State Trooper 1/24
72786 Philadelphia Police 1/24
72787 Los Angeles Police 1/24
23
Dodge Monster Trucks
Hall Brothers Racing, Inc. is owned
and operated by Tim and Mark Hall.
Involved in racing since 1978, their
innovative design enabled them to
win the 2003, 2004, 2005 and 2006
Monster National Championships.
In 2005, the Raminator Monster
Truck took top honors as Truck of the
Year, at the Monster Truck Racing
Association (MTRA) banquet.
Tim is responsible for much of
the design work and builds and tunes
the supercharged, alcohol-burning
Dodge HEMI® engines, which are
critical to successful monster trucks.
Raminator’s championship pilot,
Mark is shop foreman, responsible
for fabrication and welding on the
trucks. Mark is instrumental in the
design work and 2005 “Driver-of-theYear” for the fourth time.
The Hall Brothers Race Team is
rounded out by race drivers Dale Benear and Geremie Dishman, MTRA
2004 Rookie of the Year. In 2004, the
73014 Dodge Raminator 1/24
24
Rammunition, won the 2004 “Most
Improved Team award.
Geremie, winner of the MTRA
2004 Rookie of the Year, looks forward to 2006. He claims having the
power of an incredible 565-cubicinch supercharged HEMI® engine
under the hood of the Rammunition
can make the difference between
winning and losing. For more on
racing and a public appearance
schedule, visit raminator.com.
73015 Dodge Rammunition 1/24
Car Display Cases
• Crystal Clear—no unsightly molding points
• Simulated Metal Base
• Stackable
14101 Single Case 10 5/8” x 4 7/8”x 4”
14102 Value pack, 2 cases for 1/24 or 1/25 scale
Cars not included
14105 Motorized Rotating Display
Turntable with mirror base for 1/32 scale cars
Car not included
25
Large 1/8 Scale Cars
Unassembled Plastic Model Kit
The Big Red Rod has been created for the experienced builder.
One of the most challenging kits, it features an operational
steering mechanism and precision tooling.
• Precision tooling
• Operational steering
• Body molded in color
• Ford official licensed product
73044 Big Red “T” Rod 1/8
26
TM
Can be assembled
using an optional
ragtop
73046 Bobtail “T” 1/8
Bodies molded in color • Precision tooling • Operational steering • Ford official licensed product
73047 Tall “T“ 1/8 scale
27
73048 Exterminator Dragster
This model is two feet long (60.96 cm) and features an operating steering mechanism.
The kit includes optional parts, allowing the builder to choose which version to build.
Choose from a twin engine dragster single engine streamliner with blower top mounted,
front mounted, carbs or an open flame dragster. Numerous other variations with
component parts included in this kit.
Twin Engine Powerhouse
• Body molded in white
• Twin chrome engines
• Rubber-like tires
Spoke and Wire Tires included
28
Large 1/12 Scale Car
73043 Fiat Dragster
1/12 scale
• Body molded in white
• Operating coil spring suspension
• Rubber-like tires and chrome plated parts
29
Missles, Spacecraft and Aliens
nose cone cutaway
91003 Mars Probe
Communication Satellite 1/200
This model of the Mars Probe Communication Satellite has three stages, enabling the
satellite to be launched beyond Earth into
Mars orbit. The purpose of this satellite is to
relay information on Mars and outer space
back to Earth. This valuable information is
transmitted back to us, by means of radio
and TV signals. The actual rocket this
model represents is approximately 200 ft.
high and the power of its thrust is measured
in the millions of pounds.
91009 Mars Probe
Landing Module 1/200
91008 Space Base and Satellite Explorer
30
91004 Alien 1/5
91002 Space Shuttle with
Booster Rockets 1/200
91005
Roswell UFO 1/48
91007 Space Shuttle 1/200
91006 Area 51 UFO 1/48
76014 Transparent Alien™
The Transparent Roswell Alien™
Model is truly out of this world!
It resembles the Roswell alien reportedly found in Roswell,
New Mexico. Alien model and base
stands over 19” tall.
Package size: 10”x 20”x 4 ¾”.
31
Armor
Both the Tiger 1 and the Panther G machines
were designed and built to stand up against
the Russian T 34. Each carried a crew of 5. Of
the two tanks, the Tiger 1 was heavier and
slower (56.9 tons/38 km/h). The Panther was
lighter and faster (44.8 tons/55 km/h) with a
75mm gun and a 16hp/ton power ratio. The
Tiger had an 88mm gun and with the same
690hp engine; but only had a 12.3 hp/ton
power ratio.
Over 6000 Panthers (various models) were
built throughout the war, but only 1,355 of
the various Tigers were produced.
76081 Tiger 1 Tank 1/48
76083 Panther G Tank 1/72
76086 German 8 Ton 1/2-Track
Weapons Carrier 1/72 scale
The workhorse of the German army, the
German 8 ton 1/2 track served as a weapons
carrier and personnel carrier. It was able to
carry a variety of weapons of various sizes.
76002 M46 Patton Tank 1/35 scale
The first of the Patton series tanks, the M46 Patton
was one of the U.S army's main battle tanks of the
Cold War, designed to replace the previous M26
Pershings and M4 Shermans.
The tank was named after General George S.
Patton, commander of the U.S. Third Army
during World War II, and an American
advocate for the use of tanks in battle.
32
16001 Digger
16002 Davey
16003 Drag Hag
16004 Daddy
16005 Endsville Eddie
16006 Freddy Flameout
33
The Hawk® Weird-Ohs® line consists of 12 model kits.
These model kits are the real thing, made from the
original molds – and fun to put together!
34
16007 Huey’s Hut Rod
16008 Leaky Boat Louie
16009 Killer McBash
16010 Francis the Foul
16016 Wade A. Minut
16017 Sling Rave Curvette
15004 Frantic Cats
15001 Totally Fab
15002 Frantic Banana
15003 Steel Pluckers
35
As cool today as they were in the ‘60’s!
16015 Woodie on a Surfari
16011 Hot Dogger Hangin’ Ten
16013 Hodad Makin’ the Scene
36
16012 Beach Bunny Catchin’ Rays
16014 Hot Dogger & Surf Bunny Riding Tandem
Weird-Ohs® Monster Trucks
Dodge and HEMI are trademarks of Chrysler
LLC. Dodge Ram and its trade dress are used
under license by J. Lloyd International, Inc.
© Chrysler LLC 2009
5000
LIMITED
EDITION
73016 Weird-Ohs®
“WADE A. MINUT”™
Monster Truck KIT
73017 Weird-Ohs®
“DAVEY”™
Monster Truck KIT
5000
LIMITED
EDITION
73018 Weird-Ohs®
“HUEY’S HUT ROD”™
Monster Truck KIT
5000
LIMITED
EDITION
Each Monster Truck Kit includes Five
Limited Edition Collectible Weird-Ohs®
trading card reproductions from the ‘60’s—
plus additional Weird-Ohs® decals!
Two card displays are available with
packs of eight collectible cards.
24 packs in each display.
16070 Weird-Ohs®
Card Display
16073 Weird-Ohs®
Baseball Card Display
37
Cars
1/24 Assembled and Unassembled
Diecast Collectibles
Assembled
includes Crystal Clear
Display Case
Unassembled Diecast
Collectibles include:
• Opening hood
• Pre-painted in high gloss finish
• Custom street rod interiors
• Detailed chassis with separate
exhaust system
• Custom wheels with super low
Insani Sedan™ 1/24
Assembled
77002 Dk. Blue Metallic
Unassembled
80203 Black
Chezoom™ 1/24
Assembled
77008 Turquoise
Unassembled
80101 Black
Rumba Tub™ 1/24
Assembled
77022 Red
Unassembled
80301 Black
Beach Reacher™ 1/24
Assembled
Haulucination™ 1/24
Assembled
77013 Red
Swoop Coupe™ 1/24
Assembled
38
Unassembled
80401 Red Metallic
Unassembled
80501 Orange
Metallic
Assembled
77010 Black
Unassembled
80602 Black
Buikool™ 1/24
Unassembled
80701 Orange Metallic
Cars
1/24 Assembled and Unassembled
‘70 Ford Torino GT 1/24
Assembled
66013 Orange
66014 Yellow
Unassembled
10201 Orange
10202 Yellow
Assembled Diecast Kits include:
• Authentic high-gloss factory colors
• Opening hood, doors and trunk
• Decorated interiors
• Engine details, including spark plug wires
• Crystal clear display case included
‘49 Mercury Convertible 1/24
Assembled
Unassembled
66007 Calabash Yellow
10701 Alberta Blue
66009 Tampico Red Metallic 10702 Tampico Red
Unassembled Diecast Kits include:
‘49 Mercury Coupe 1/24
Assembled
66028 Brown
• Prepainted metal body
• Opening hood, doors and trunk
• Super detailed engines
• Posable wheels
• Over 75 precision-molded parts
Unassembled
10804 Brown
‘67 Dodge Charger 1/24
‘71 Plymouth HEMI® Cuda 1/24
Assembled
66024 Yellow
66023 Purple Metallic
Unassembled
10901 Sublime Green
10904 Purple Metallic
Assembled
66035 Red
66036 Black
66061 Blue
Unassembled
11301 Black
39
Historical
1/16 scale
This faithful replication of an Old West stagecoach, includes four horses complete with
harness, reins and hitch chains. A
driver and shotgun rider are included,
along with three passenger and hold-up man.
The model shown, built by Richard
Melillo, shows several creative details not included in the kit to capture a 3-D ”Moment
in Time.” After creating a base he added actual mud, rocks and dirt. The arrow is a
straight pin with paper feathers. He makes
his own rope to “tie on” the luggage by twisting together embroidery floss. He added bits
of metal tape to the wheel edges.
To make the shotgun rider appear to be
turning around, he manipulated body parts
before painting. After doing extensive research, Richard “ages” his model with paint
to help tell the story exactly as it might have
appeared.
70351 Concord Stage Coach 2’ 6” (76 cm) 1/16 Base not included
Figure (not base) included
40
41
Historical Artillery
1/16 scale
At the Campaign of Second
Manassas (August 27-September
1,1862), the Confederate Army
of North Virginia, under General
Robert E. Lee, overran and
captured a Union Artillery
Battery. Major General John
Pope of the Union Army of
Virginia lost twenty-six of his
best artillery men on the hilltop
known as “Battery Heights”.
After the battle, it was usual
for the winning side to take
and utilize the weapons and
any supplies available. It was a
strong victory for the South and
came as one of the few they
were to have in the rest of war.
70349 Horse Drawn Confederate
Field Artillery 1/16 Base not included
70350 Horse Drawn Union
Field Artillery 1/16 Base not included
This “vignette” represents a true
historical moment in the
American Civil War. These
detailed replications include
three soldiers, cannon and four
horses complete with harness,
reins, hitch chains and flags.
Richard Melillo, model builder,
added details like the hole in
the pants of one of the Union
riders, and splashed the riders
and artillery models with actual
mud. Instructions are included
for making a flop hat and long
pants (as shown on the Confederate soldiers).
More information on this famous battle is listed in the
government archives of battlefield history of the Civil War.
42
Motorized Ships Designed for Radio Control
70815 Blue Devil Destroyer “Fletcher Class” 36” long (91 cm) 1/125 scale
70813 PT-109 29 ½” long (74.9 cm) 1/32 scale
43
Aircraft
No. 70819 German Aircraft Carrier Graf Zeppelin
Lighted interior of hanger deck
44
Anti-aircraft guns tubs and six inch guns
1/200 scale Unassembled Plastic Model Kit
MODEL MEASURES OVER 56 INCHES LONG!
Germany’s only aircraft carrier, Graf Zeppelin, was
named in honor of Count Ferdinand Von Zeppelin.
Construction was started in 1936, and plagued with
problems, the war was over before she was completed.
She was scuttled by the Germans and later towed to
Russia by the Soviets, where she was used for target
practice until finally sunk in 1947.
The specially designed Stuka (JU87c) had folding
wings and a arresting hook. The ME 109-T had
extended squared-off wing tips, with a similar
arresting hook. Fifty-seven ME 109-T aircraft were
built and tested in over 1,500 take offs and landings.
After the construction of the aircraft was stopped,
all the completed planes were used by the Luftwaffe
elsewhere. No plane ever took off or landed on
the Graf Zeppelin.
The blueprint images shown are from photos of
the originals. Original bluprints are 27 feet in length
and stored in the German archives. The Lindberg
prototype shown here was researched and built by
Richard Melillo at www.themodelersart.com.
Model kit includes 25 Stuka and 25 ME 109T aircraft
45
Submarines
70817 Imperial Japanese Navy Submarine C-1 (class) I-20 and the HA-20 Midget Submarine
The first shots of the Pacific War began when the USS
Ward sank the HA-20 with a shot from its 3” guns three
hours prior to the Pearl Harbor attack. Five mother subs
and their midgets where lying in wait at the entrance of
Pearl Harbor on December 7th, 1941. The mother ships
I-16, I-18, I-20, I-22, I-24 all launched their midgets to go
into Pearl Harbor and sink ships. All were sunk except
HA-24, which grounded at Hickam Field Beach and was
salvaged and used as a US Bond drive incentive in
America. Its pilot was the first Japanese prisoner of war.
70818 Imperial Japanese Navy Submarine C-3 (class) I-53 with Kaiten “Kamikaze” Torpedoes
Commissioned in 1944, the I-53, one of three in its
class, was launched in 1943 from Kure Naval Dockyard.
C3 boats were fitted with inferior engines due to
wartime shortages, resulting in a reduced surface speed
of 17.75 knots and 6.5 knots submerged; however, additional fuel tanks made it possible for long-range cruises.
A Japanese version of a snorkel was first used on these
class subs.
46
With modifications, the I-53 was converted into a
kaiten carrier in November, 1945. Initially, four kaiten
could be carried, later it was increased to five. I-53 carried
19 torpedoes with six each 21” torpedo tubes on the bow.
On July 24, 1945, in the Philippine Sea, a kaiten of
the I-53 sank the Navy destroyer Escort USS Underhill
(DE 682), the only warship sunk from this type of
weapon. I-53 survived the war, and was scuttled by the
1/72nd scale Unassembled Plastic Model Kit
TOTAL LENGTH OF EACH MOTHER SUB IS 58½ INCHES!
The mother subs, designed in the mid-thirties,
continued on in the war. All were refitted by the end of
November, 1941, to carry the Midgets to Pearl Harbor.
IJN I-20 was one of five C1 type submarines developed
from the KD6 (class). With a typical compliment of 101
crew members, they could cruise at 23.5 knots when
surfaced and 8 knots while submerged. The deepest they
could submerge was 330 feet. The after casing (space aft
of the conning tower) was reserved for the fitting of one
Type A midget submarine. The U.S. forces sank all, I-22
IaN 1942, I-18, I-20, I-24 in 1943 and I-16 in 1944.
Detail of Type-1 Kaiten
(human piloted) Torpedo
The Lindberg prototype shown was built by
Richard Melillo at www.themodelersart.com
US Navy off of Goto, Japan, in April, 1946.
The Japanese began development of the Kaiten
(“Turning of the Heavens”) in early 1944. The kaiten
torpedo program was not accorded high priority until after
the Imperial Japanese Navy’s failure to defend the Marianas in 1944. The kaiten featured the combination
of a Type 93 oxygen-powered 48’4” X 24” torpedo with
a large warhead guided by a human pilot. The warhead
contained a charge of 3300 lbs. of high explosive with
a maximum speed of 30 knots.
The first Kaitens required the pilot to enter while the
mother submarine was surfaced. Later modifications
allowed for entry through a lower hatch fitted in the
kaiten. Once inside, the pilot received target data by
telephone (with break-away line) before being launched.
Actual successes were few and heavy losses were suffered
as there was no way to return to the mother ships. It was
a “one way “ mission, part of the “Kamikaze — Special
Attack” tactics. All, a failed attempt, to destroy the enemy.
47
Ships
70888 Air Force Rescue Boat 1/72
77225 Coast Guard Tug Boat 1/72
77224 President’s Liner 1/350
77226 Fire Boat 1/72
48
70886 PT 109 1/64
Unassembled Plastic Model Kit scale noted
Ships, Carriers, Destroyers and Submarines
70825 Bismarck Battleship 1/350
70826 USS Yorktown Aircraft Carrier 1/525
70827 Tirpitz Battleship 1/350
70828 HMS Hood Battleship 1/400
70830 Minesweeper 1/125
70829 Landing Ship Dock 1/288
70869 USS Missouri 1/900
49
Ships, Carriers, Destroyers and Submarines
Unassembled Plastic Model Kit scale noted
70861 USS Manchester Light Cruiser 1/600 70862 Scharnhorst German Battleship 1/762
70863 USS DeLong Destroyer Escort 1/300 70865 D-Day Invasion L.S.T. 1/245
50
70866 D-Day Invasion L.C.V.P. 1/32
70867 D-Day Invasion L.C.T. 1/125
70884 USS Nautilus Atomic Sub 1/300
070885 SS Gato Fleet Sub 1/240
www.hawkmodels.com
Sailing Ships
These kits are molded in two colors with molded billowing sails. Easy to follow rigging instructions are included.
70875 HMS Bounty 1/166
70891 Golden Hind 1/245
70892 HMS Victory 1/500
70893 USS Constitution 1/450
70894 Flying Cloud 1/500
70895 USS Constellation 1/138
www.hawkmodels,com
51
Sailing Ships
70812 Sea Witch 33” long (83.8 cm) 1/96
52
Sea Witch detail
53
Boats
This famous Mississippi steamboat, one of
the finest packets of its time, was employed
in the cotton trade between New Orleans
and Vicksburg. She was 300 feet long, had
two engines with a 10 foot stroke, a 10 foot
hold, cylinders with a 40 inch bore, and side
paddles 38 feet in diameter. This 1/163 scale
finely detailed model is 22 inches long.
70864 Robert E. Lee Steamboat 1/163
77221 Diesel Tug Boat 1/82
54
77222 North Atlantic Fishing Trawler 1/90
77220 Tuna Clipper 1/60
77223 Shrimp Boat 1/60
77257 Monitor and Merrimac 1/210, 1/300
70887 Coast Guard Patrol Boat 1/80
70860 Nantucket Light Ship 1/95
Nantucket Light Ship detail shown above
55
Famous Pirate Ships
70858 detail
C
aptain Edward Teach is
probably the most infamous
pirate in history. This model,
molded in two colors, features
billowing molded sails,
molded ratlines and detailed
to scale figures. Easy to follow
rigging instructions are also included with each kit.
70858 Blackbeard Pirate Ship 1/130
71302 Pirate’s Skull
56
70873 Captain Kidd Pirate Ship 1/130
83333 Flying Dutchman Ghost Ship
“Glows In The Dark” 1/130
70874 Jolly Roger Pirate Ship 1/130
70859 Sir Henry Morgan Pirate Ship 1/130
57
Pirate Guns and Pistols
1/245 scale
Journey back to the days of hidden sea
treasures and seafaring pirates. Lindberg’s
exquisite plastic model kits help you build
authentic-looking historic firearms. Fun for
model builders of all ages. Recommended
for ages 10 and up. Scale: 1/1
78001 Flintlock 1/1
78006 The Miquelet 1/1
78008 French Wheellock 1/1
78009 The Blunderbus 1/1
58
Patriotic Kits
70315 American Eagle 1/6
70314 Statue of Liberty 1/225
59
Airships
70816 Graf Zeppelin 38 1/2
(97.8 cm) 1/245
The Graf Zeppelin made its first trip to
the United States, October 11, 1928.
Carrying 63 people and cargo, it averaged 56.6 miles per hour. The flight
lasted 111 ½ hours and covered 6,000
miles. On its return trip to Germany,
it made a record breaking time of 71
hours and 12 minutes — a new record
for airships.
The Hindenburg disaster proved
to be a fatal blow toward any further
development of the great airships. The
major hazards for these airships were
weather, fire, and the resulting explosion
of burning hydrogen.
The Graf Zeppelin made its last
flight to South America in 1938 and was
retired and dismantled in 1939. The retirement of the Graf brought the era of
the great airships to an end.
This Graf Zeppelin model kit has
been specially designed for the experienced model builder. This kit has been
retooled and reissued to include interior
of control cabin.
Model features a lighted cabin interior—battery included
Graf Ferdinand Von Zeppelin
began his work with giant
airships as early as 1874
Cockpit interior
US Postal Stamp
60
New Tooling • All Parts Injection Molded
Graf Zeppelin LZ-127
Technical Specifications
Length: 776 ft. (236,52 m)
Height Overall: 110.6 ft. (33,71 m)
Total Horsepower: 2,650
Range at 68 mph: 10,400 mi
(109 km/h, 16 737 km)
Number of Engines: 5
Maximum Speed: 80 m.p.h. (129 km/h)
Overall Weight: 129 tons (108.8 mt)
Underside view
61
Airships
70821 USS Los Angeles Airship 1/245
The USS Los Angeles was a rigid airship,
designated as ZR-3. Built in 1923-1924 by the Zeppelin factory in Friedrichshafen, Germany,
the original designation was LZ-126. The airship
was given to the United States by the German Government, since it was partially funded by war reparations from World War I.
The airship was commissioned into the U.S.
Navy on November 25, 1924, at Anacostia, D.C.,
with Maurice R. Pierce in command. At the same
time, it was switched over from hydrogen to helium
gas, which reduced payload but improved safety.
The USS Los Angeles logged a total of 4,398 hours
of flight, covering a distance of 172,400 nautical
miles (319,300 km) flying from the Pacific to the Atlantic. It not only served as an observatory and ex-
perimental platform, it was a training ship for other
airships.
On August 25, 1927, while tethered at the Lakehurst high mast, a gust of wind caught the tail of the
Los Angeles and it was lifted it into colder, denser
air, just above the airship. The tail continued to lift
reaching an angle of 85 degrees. After finally descending, the ship suffered only slight damage and
was able to fly the next day.
As an economy measure, it was decommissioned in 1932, and later re-commissioned for a
brief period after the USS Akron crashed in April
1933. Struck from the Navy list in 1939, and
dismantled in its hangar, the career of the longest
serving airship ended without disaster.
LOS ANGELES was key in the development of
the low-mast mooring system for airships and
the technique of an airship-airplane hook-on,
in 1929-31.
62
Inside Hanger No. 1 at
NAS Lakehurst
Los Angeles in flight over
Washington, D.C.
Aircraft approaching ZR-3
for hook-on
The USS Los Angeles carried a light biplane
fighter aircraft, the Curtiss Sparrowhawk, which
was designed to be deployed from a larger aircraft. At 20 feet (6m) long and with only a 25
foot (7m) wingspan, the Sparrowhawk was ideal
for service with rigid-framed airships because of
its small size.
Although armed, its primary duty was
reconnaissance and observation, giving airships
it served on a much wider search area. For launching, the Sparrowhawk would free-fall
from outside the airship's hangar, and for recovery, it would hook a trapeze in mid-flight and be
mechanically pulled into the airship.
63
Aircraft
70212 F-F4D-1 Skyray 1/48
70501 F6F Hellcat 1/48
70502 P-47 Thunderbolt1/48
70503 F-86 D Sabre 1/48
70504 F-11F Tiger 1/48
70505 Japanese Zero 1/48
70506 F7U-1 Cutlass 1/48
70507 A4D-1 Skyhawk 1/48
70508 Junkers JU87 Stuka
1/48
70513 Focke Wulf FW190 1/72
70536 Convair X FY-1
VTO "POGO" 1/48
64
70541
B-70 Bomber 1/180
70542 Blue Angels F11F-1 Tiger 1/48
70544 B-1 Bomber 1/144
70551 Messerschmitt ME262 1/48 70552 F-80C Shooting Star 1/48
70553 F-86 A Sabre 1/48
70554 F-94 C Starfire 1/48
70961 MiG-21BD 1/72
Battle Damaged* 1/72
70962 F-4G Phantom 1/72
Battle Damaged*
70963 A4D Skyhawk 1/72
Battle Damaged*
70964 F-100 Supersabre 1/72
Battle Damaged*
* Battle Damaged kits may also be built as undamaged.
71426 X3 Stiletto 1/48
65
Aircraft
75312 TBF Avenger 1/48
70540 B-58 Hustler Bomber 1/64
72522 F-104C Starfighter 1/48
72523 F-8J Crusader 1/48
72521 F-100D SuperSabre 1/48
75311 XF-88 VooDoo 1/48
75309 B-17 Flying Fortress 1/64
66
70509 Junkers JU-88 1/72
Aircraft
70510 Heinkel HE111
1/72
70511 Corsair F4U 1/48
70512 OA-9 Goose 1/48
67
Aircraft
70561 Gee-Bee Air Racer 1/32
68
70562 Laird Turner Meteor 1/32
72542 Curtis P6E 1/48
72561 Gloster "Gladiator" 1/48
72581 British SE 5A 1/48
72582 Stearman PT-17 1/48
72583 Curtiss Jenny 1/48
Unassembled Plastic Model Kits 1/48 scale
70557 Fairey Flycatcher 1/48 scale
British Navy Fighter
70558 Bristol Bulldog 1/48 scale
70545 Hawker Fury 1/48 scale
70546 Westland Lysander 1/48 scale
70564 Bristol Boxkite 1/48 scale
70563 1911 Avro Triplane 1/48 scale
69
Aircraft
70509 Junkers JU88 1/72
70510 Heinkel HE111 1/72
70559 Mitsubishi G4M2 Bomber 1/72
70530 Avro Vulcan Bomber 1/100
70531 Chinese MiG-15bis 1/48
70
Aircraft
70514 B-17 Flying Fortress with Chrome Finish 1/64
Ground crew and tanker included with kit
70565 Handley Page Victor 1/100
71
Aircraft
70521 Heinkel HE-100 1/72 scale
70522 Curtiss Helldiver SB2C 1/72
70523 F6F Hellcat 1/72 scale
70524 Harrier 1/72 scale
70525 P-51 Mustang 1/72 scale
72
70529 Kingfisher 1/72 scale
Unassembled Plastic Model Kit 1/72 scale
70515 Dornier DO-335 1/72 scale
70516 Arado AR 234B 1/72 scale
70517 Messerschmitt ME-410 1/72 scale
70518 Henschel HE 129B 1/72 scale
Both Models
Included!
70519 ME-163 Komet 1/72 scale
70520 Heinkel HE-162 1/72 scale
73
Aircraft
Unassembled Plastic Model Kit 1/48 scale
71140 SH-3 Sea King 1/72
71141 HH-3E Jolly Green Giant 1/72
71142 UH-1 Huey ‘Iroquois’ 1/48
71143 AH-IS Cobra 1/48
91001 Snark Intercontinental Guided Missile
Figures, ground crew and equipment included. 1/48
74
Transparent Anatomical Kits
Unassembled Clear Plastic Model Kit
Transparent models show parts of the skeletal, digestive, and cardiovascular systems
through a clear plastic shell and feature soft internal organs and an instruction manual.
A unique window box visually displays the product.
The enclosed instruction
manual helps the builder
learn about anatomy.
76009 Transparent Man™
76013 Transparent Woman™
The Transparent Man™ model with base stands over
18” tall! Includes soft internal organs and a display
stand etched with the male symbol.
Package size: 10”x 20”x 5”.
The Transparent Woman™ model stands over 18” tall
with base and includes a pregnancy option to create a
model of an expectant woman! Includes soft internal
organs and a display stand etched with the female
symbol. Package size: 10”x 20”x 5”.
75
Transparent Anatomical Kits
Unassembled Clear Plastic Model Kits
76012 Transparent
Giant American Bullfrog™
The Transparent Giant American Bullfrog kit
features a life size transparent frog body and
full size skeleton with vital organs. Included in
the kit is a frog life cycle display, small juvenile
frog, instructions, and anatomy chart.
1 to 1 scale.
76015 Transparent Horse™
The Transparent Horse is a precisely detailed kit
featuring a complete horse skeleton that is anatomically
accurate with soft internal organs. The instruction
manual helps horse lovers learn about equine anatomy.
It is 20” high by 23 ½” long. 1/4 scale.
76016 Transparent T-Rex™
The Transparent T-Rex model stands 18” tall and
is 31” long. Featuring soft internal organs and the
complete dinosaur skeleton, it also includes an
instruction manual to help learn about dinosaur
anatomy. 1/16 scale.
76
Anatomical Kits
71304 Human Skeleton 71305 Transparent
Body
71301 Brain/Skull
Combination
This model has a skull that
separates to allow the brain
into the cavity. Complete
with stand, this kit also features a movable jaw.
The human skeleton model
stands 14" high and features
a bone white plastic skeleton
with movable arms, legs and
jaw. Instructions and display
stand are included.
71307 Human Eye
The human eye model is
four times the size of an
actual human eye. The
unassembled kit comes
with full assembly
instructions and a display
stand
71306 Human
Brain/Skull
This kit is a 1/6 scale 3-D
model of the human body
with sections exposed for
observation and study. The
model shows vital organs
and the skeleton of the
human body.
The Human Brain/Skull kit
is a 3-D model kit of a halfskull with removable brain
sections. The unassembled
model kit comes with
stand and complete
assembly instructions.
71308 Human Ear
71309 Human Heart
71310 Human
Nose/Mouth
This model is larger than life
size, showing inner ear sections, and exposing canals,
drum and nerves for study.
It may be painted to match
the package photo.
This life size model of the
human heart shows heart
sections exposed for observation of inner chambers,
veins, valves and arteries. Kit
includes display stand and
full assembly instructions .
The Nose/Mouth kit is an
anatomically accurate 3-D
model on a stand with exposed sections for observation and the study of
glands, nerves and cartilage
of the nose and mouth.
77
Anatomical Kits
A complete set of anatomically accurate kits from a heart model that actually pumps simulated blood to a
model of the human eye that can be opened to reveal the innermost workings. All of these kits are ideal for
study and school science projects. Recommended for ages 10 and up.
78
71311 Human Lung
71312 Human Tooth
71315 The Five Senses
The Human Lung model kit
has a life size anatomically
accurate model showing
inner lung sections exposed
for observation and study.
Full assembly instructions
and display stand are included with this kit.
The Human Tooth model kit
features a detailed model
eight times the size of a
human tooth. The model is
anatomically accurate and
hinged to show interior.
The Five Senses model kit contains five individual
3-D model kits of the five senses all in one package!
Completed models for the senses of touch, smell,
hearing, sight and taste measure 5"x 6" to 7”x 9”.
71316 Pumping Heart
71313 Skeletal Hand
71314 Skeletal Foot
The transparent pumping
heart finished model is 11”
high. Life-like continuous action pumps simulated
blood through the visible
heart chambers just like a
real human heart.
The skeletal hand is a fully articulated
life-size model of the human hand that
is anatomically accurate. A display stand
is included with this unassembled kit
that is made with pride in the U.S.A.
The skeletal foot model kit is of a fully articulated life-size human foot. The
anatomically accurate model kit includes
a display stand and full assembly
instructions.
Dinosaurs
Dinosaurs were some of the best examples of survival and adaption history has known.
There were land dwelling dinosaurs, dinosaurs that lived in the sea and those that flew in the air. Dinosaurs
ruled the earth longer than any other land animal (about 150 million years).
70275 Tyrannosaurus Rex
70276 Anklyosaurus
70277 Velociraptor /Raptor
70280 Hadrosaurus/Corythosaurus
70279 Triceratops
70281 Apathosaurus/Brontosaurus, with caveman
70282 Stegosaurus
79
09
0
2
W
E
N
!
RELEASE
Introducing an exciting new series of 1/25 scale
model kits from Lindberg. These kits are about
having fun using imagination to create your own
3D vignette. Each kit includes an instructional DVD
from world renowned master modeler and instructor, Richard Melillo (You can reach him on his
website with questions: www.TheModelersArt.com)
Detailed instructions on the DVD explain how
you can create your own “moment in time.”
Tips and techniques are explained, showing you
how to use everyday items you can find around
your home. Printed diorama background included,
additional 3D items shown not included.
Inclu
Model K des
it, Pr
Backgro inted
& Instruct und
i
creating onal DVD on
3D effec
ts!
72185 ‘34 Ford Pickup
72186 ‘64 Dodge Pickup
© 2009 J. Lloyd International, Inc.,4520 20th Avenue SW, Cedar Rapids, IA 52404, Phone (319) 390-8888, FAX(319)390-8896, www.j-lloyd.com
All Rights Reserved. Printed in the U.S.A. Design and specifications of this catalog are subject to change without notice. We reserve the right to
discontinue any item without previous notice. Hawk™ and America’s Oldest Model Company™ are wholly owned trademarks of J. Lloyd
International, Inc.
Thom Taylor and Thom Taylor designs are used under license to J. Lloyd International, Inc.
Keystone, Weird-Ohs, Transparent Giant American Bullfrog, Transparent Horse and Transparent T-Rex ,Chezoom, Insani Sedan, Rumba Tub,
Swoop Coupe, Beach Reacher, Haulucination and Buikool are trademarks of J. Lloyd International. Inc.
Ford Oval and nameplates are registered trademarks owned and licensed by Ford Motor Company. Manufactured by J. Lloyd International, Inc.
Chrysler, Plymouth, HEMI® and related logos, vehicle model names and trade dresses are trademarks of Chrysler LLC and are used under license.
© Chrysler LLC 2009.
Dodge and HEMI are trademarks of Chrysler LLC and are used under license by J. Lloyd International, Inc. ©Chrysler LLC2009
©The Coca-Cola Company. COCA-COLA, COKE, the Contour Bottle design, the Red Disc Icon, the Dynamic Ribbon device and the
COCA-COLA Santa are trademarks of The Coca-Cola Company. All rights reserved.
Buddy “L” is a registered trademark of Imperial Toy Company.
80
©2009 J. Lloyd International, Inc. • 4520 20th Ave. SW • Cedar Rapids, IA 52404
(319) 390-8888 • FAX (319) 390-8896 • www.lindberg-models.com • www.hawkmodels.com

Lindberg/Hawk 2009

Transcription

Similar documents

May 29, 2009

Lindberg Produkt Katalog 2007-2008 im Vertrieb von Krick

The construction of gender through Man Ray`s Le Violon d`Ingres

`Your safety 1st` during robbery

EEO Public File Report 2015

Hanging file system kits. File Frame.

PDF - Kayak Cedar Keys

July 2016.pub

Trip distance: 61 miles Time: 1 hr 21 mins, per Yahoo directions

Shuttle Parking Vendor Parking Visitor Parking Darvin Furniture