LDFN14720

PRODUCT DATASHEET
STELLA series
last update 13/7/2015
DETAILS
Product Number
FN14720_STELLA-FRESNEL
Family
STELLA
Type
Lens
Color
clear
Diameter
85 mm
Height
23 mm
Style
round
Optic Material
Silicone
Holder Material
Fastening
screw
Status
ready
ROHS Comliant
Yes
Date Updated
1/07/2015
OPTICAL PROPERTIES
Viewing
Light
Effi-
LED
Angle
Beam
ciency
cd/lm
Connector
Soleriq P13
25 deg
Streetligh...
89 %
1.900
-
CLU046
36 deg
Streetligh...
86 %
1.100
-
September 2nd 2015 14:08 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1
Ledil Oy
Salorankatu 10
24240 SALO, Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
A
B
C
D
E
22.75
F
G
H
4
4
A
90
Isometric view
Scale: 1:1
A
3
3
3.1
2
2
75
Venting pipe:
Piercing this membrane
will Allow lens breathing
INDEX PART NO DESCRIPTION
Section view A-A
Scale: 5:1
1
F14627
C13322
Tolerances if not otherwise shown
According to DIN ISO 2768-1
Linear measures: class V
Please note that due to the elasticity of
products made of silicone actual measured
values may vary, and therefore typical
tolerance values may not be applied.
THIRD ANGLE PROJECTION:
1
This drawing is the property
of LEDiL Oy. It may not be
reproduced, copied or
communicated without a written
agreement with LEDiL Oy.
G
COLOUR
Optical grade LSR
black
PA
Ledil Oy
Salorankatu 10
FIN 24240 SALO
Finland
DRAWING TITLE
FN14720_STELLA-FRESNEL
SIZE
1
PART NUMBER
FN14720
A3
SCALE
H
STELLA-FRESNEL
STELLA-FRAME
MATERIAL
1:1 WEIGHT
34,65 g
B
SHEET
A
1/1
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
GENERAL INFORMATION
- Product series especially designed & optimized for series of LEDs.
- Special care taken to make light distribution as uniform as possible.
Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly
recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL
products being used outside of the recommended temperature range.