BWT PERMAQ Compact 41 - BWT Best Water Technology
Transcription
BWT PERMAQ Compact 41 - BWT Best Water Technology
BWT PERMAQ® Compact 41 Product data sheet 09/2014 Reverse osmosis system Reverse osmosis system with everything in one stainless steel cabinet Benefits: Water quality with conductivity of <20 µS/cm Simple and compact Can be fitted with a conductivity meter The combination with a mixed-bed system can provide an even lower conductivity (<0.5 µS/cm) Installation kit for quick and easy connection Features: Reliable and maintenance-friendly This compact system is the perfect solution for small humidifiers, instrument washers and autoclaves where a low conductivity (< 20 µS/cm) is required and where space is limited. The system is particularly suited for applications with a varied flow. Normally, such consumption patterns create wear on the pump, especially as a result of the many starts and stops, but the integrated 11-litre hydrophore protects and ensures stable operation for varying consumption patterns. Typical application areas: Smaller dishwashers Glass washers Autoclaves Humidification systems Smaller systems that require a small amount of permeate water Simple reverse osmosis system The system’s size makes it easy to position when space is limited Built-in control - no additional electronics required Manometer for reading the pressure The system will automatically stop if there is no inlet pressure Automatic backwash of the membrane after each stop Alarm output Integrated mixing valve for adjusting the conductivity - the possibility to supply water quality according to special needs The flexible design allows for expansion with: Conductivity meter with alarm function – giving the system the best possible protection Demineralisation filter as a further treatment providing even lower conductivity (< 0.5 µS/cm) Installation - quick and simple connection BWT HOH A/S Geminivej 24 • DK-2670 Greve Tel.: +45 43 600 500 bwt@bwt.dk • www.bwt.dk Der tages forbehold for trykfejl og tekniske ændringer. BWT PERMAQ® Compact 41 Product data sheet 09/2014 Reverse osmosis system Technical data: BWT PERMAQ Compact 41 Unit Nominal permeate performance * l/t Salt reduction % > 98.0 Water utilisation WCF (min/max) ** % 40 / 75 l 2.5/3.5 Permeate tank volume Inlet pressure (min/max) 130 bar 2.0 / 7.0 V / Hz 230 / 50 A 10 Power consumption kW 0.6 Protection class IP 54 ” ¾ Outlet mm 10 Drain ” ¾ Width mm 295 Depth mm 560 Height mm 445 Iron and manganese (Fe+Mn) mg/l < 0.1 Electrical connection Fuse Inlet Weight, approx. kg Product number * For water quality of: 10°C, 3 bar, TDS ≤ 500 mg/l ± 15%, SDI ≤ 3.0, oxidants ≤ 0.05 mg/l. ** Based on a water quality of TDS ≤ 500 mg/l, without softening as a pre-treatment. BWT HOH A/S Geminivej 24 • DK-2670 Greve Tel.: +45 43 600 500 bwt@bwt.dk • www.bwt.dk Der tages forbehold for trykfejl og tekniske ændringer. 42 421090410