View reports from the MODEL module

Project:
Cronalaght demonstration - Energy calculation
Description:
Licensed user:
This project primarily illustrates how to calculate energy production, based on
either EU-Wind Atlas data, or on local measurements. Also ATLAS contra WASP is
illustrated, and the powerfull VISUAL module for excact positioning of the WTGs,
measuremasts etc. And the Auto optimization of the camera propertied - try the
Air View photo, this would be impossible to find the exact photo point without
this feature.
The data is fully renewed in WindPRO 2.8 - it turned out the coordinate system
was NOT Irish Grid, but Irish Transverse Mercator. And the turbine positions
thereby also some wrong - they was found exact on Google map. These
modifications brought many "not too well fitting" photomontages to an exact fit.
Lesson learned: If things do not fit fully, something is wrong with your data!
Also the ned 2.8 elevation grid object is demonstrated.
EMD International A/S
Niels Jernes Vej 10
DK-9220 Aalborg Ø
+45 9635 4444
Per Madsen / pma@emd.dk
Calculated:
10-06-2015 14:59/3.0.621
RESOURCE - Main result
Wind statistics
IE 30,0 m Cronalaght met mast.wws
Calculation uses following MAP files:
Name
Type
X min
Y min
X max
Y max
C:\...\WindPRO Data3.0\Samples\Cronalaght_Ireland\Cronalaght roughness WAsP
lines.map
roughness file
565.958 906.062 595.962 935.490
C:\...\WindPRO Data3.0\Samples\Cronalaght_Ireland\Heightcontours Cronalaght.wpo
windPRO orography file 578.932 917.917 591.802 926.820
Calculation setup
Radius from site for roughness maps
Radius from site for orography maps
All obstacles used
Radius
[m]
20.000
5.000
RSF file
Name
C:\...\WindPRO Data3.0\Samples\Cronalaght_Ireland\Cronalaght demonstration - Energy calculation_Res_25_Hub_40,0_2.rsf
windPRO 3.0.621 by EMD International A/S, Tel. +45 96 35 44 44, www.emd.dk, windpro@emd.dk
X min
Y min
X max
Y max
Area Resolution Tile Heights
size
[km²]
[m]
[m]
[m]
585.422 923.652 586.788 924.870
1,7
25 1000
40,0
10-06-2015 21:21 / 1
windPRO
Project:
Cronalaght demonstration - Energy calculation
Description:
Licensed user:
This project primarily illustrates how to calculate energy production, based on
either EU-Wind Atlas data, or on local measurements. Also ATLAS contra WASP is
illustrated, and the powerfull VISUAL module for excact positioning of the WTGs,
measuremasts etc. And the Auto optimization of the camera propertied - try the
Air View photo, this would be impossible to find the exact photo point without
this feature.
The data is fully renewed in WindPRO 2.8 - it turned out the coordinate system
was NOT Irish Grid, but Irish Transverse Mercator. And the turbine positions
thereby also some wrong - they was found exact on Google map. These
modifications brought many "not too well fitting" photomontages to an exact fit.
Lesson learned: If things do not fit fully, something is wrong with your data!
Also the ned 2.8 elevation grid object is demonstrated.
EMD International A/S
Niels Jernes Vej 10
DK-9220 Aalborg Ø
+45 9635 4444
Per Madsen / pma@emd.dk
Calculated:
10-06-2015 14:59/3.0.621
RESOURCE - Map Resource
Mean wind speed [m/s]
40,0 m
0,0 - 2,4
2,4 - 4,8
4,8 - 7,2
7,2 - 9,6
9,6 - 12,1
0
250
500
750
1000 m
Map: Gweedore , Print scale 1:25.000, Map center ITM East: 586.223 North: 924.262
Site Data
windPRO 3.0.621 by EMD International A/S, Tel. +45 96 35 44 44, www.emd.dk, windpro@emd.dk
10-06-2015 21:21 / 2
windPRO