Scandic Odense 2015: MicroNanoMoulding - 18-06 - ATV

2015: MicroNanoMoulding - 18-06-2015
Scandic Odense
Actura Nanotech ApS
Michael Døssing, Technical Director
ATV-SEMAPP
Ulla Knudsen, Sekretariatsleder
Danfoss A/S
Arnim Saalbrink, Lead consultant
DTU Elektro
Aminul Islam, Associate Professor
DTU Mechanical Engineering
Maximillian Marhöfer, Ph.D. Student
Timo Wöhner, Ph.D. Student
DTU Nanotech
Marco Matteucci, Post Doc
Anders Wolff, Associate Professor
Ernst Wittner GmbH
Ernst Wittner, CEO
Fluimedix
Reza Nikbakht, Project Manager
Formatec Ceramics
Giel Ulijn, Sales Engineer
GN ReSound A/S
Finn Hansen, Senior Mechanical Design Engineer
Allan Møller Kristensen, Sr. Design Engineer
InMold Biosystems
Guggi Kofod, CEO
Knudsen Plast A/S
Per Garbos, Projektleder
Lego System A/S
Mads Diemer, Senior Engineer
Claus Fogh Hansen, Senior Lead Engineer
Michael Lundbech A/S
Michael Lundbeck, Direktør
Jens-Erik Otte, Plastingeniør
Nil Technology ApS
Theodor Nielsen, CEO and founder
Novo Nordisk A/S
Bjørn Gullak Larsen, R&D Engineer
Jørgen Pedersen, Procesingeniør
Ortofon A/S
René Elsborg, Factory Manager
1 af 2
Oticon A/S
Preben Ottosen, Project Manager, NPI Plastics
Radiometer Medical ApS
Ebbe Helt Poulsen, R&D Engineer
Torben Rydal, Mechanical Engineer
Henrik Siiger, Maskiningeniør
RHP-Technology GmbH, Powder Shaping Technologies
Thomas Wilfinger, Graduate engineer
Sarix SA
Angelo Quardroni, CEO
Solgaard Udvikling
Kurt Solgaard, Consultant
Sonion A/S
Anders Larsen, Mechanical Engineer
Tobias Teilman, Product Development Engineer
Swansea University
Peter Blaabjerg, B.Sc. Student
Ultrasion SL
Xavier Plantá, VP&CTO
Enric Sireira, Sales & Vice Managing Director
University of Bradford
Ben Whiteside, Director Polymer Micro and Nano Centre
Widex A/S
Tina Ahlberg, Mechanical Engineer
Wittmann Battenfeld ApS
Michael Juul-Andersen, Sales Manager
Martin Philipp-Pichler, Product Manager
19. juni 2015
39 deltagere
2 af 2