300-460-Exam-Dumps

Actual Cisco 300-460 Exam Dumps Updated 2019
20% Discount on Cisco 300-460 Exam Dumps. For more info https://www.dumps4success.com/300460.html
Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) Exam 300-460
preparation is not a piece of cake for the professionals or full-time office workers as you actually need to
invest time and mind for its preparation. No doubt EN is very effort taking and difficult exam but it is not
impossible to clear it. Dumps4Success offers Cisco Implementing and Troubleshooting the Cisco Cloud
Infrastructure (CLDINF) Exam 300-460 exam dumps that includes guidelines and information according to
the Cisco 300-460 exam. The Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure
(CLDINF) Exam 300-460 exam dumps involve content and instructions which are explicitly designed to
assist you in getting through the 300-460 exam.
The 300-460 Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) Exam
exam practice material includes everything that covers the Cisco course content and prepares the
candidate for all the possibilities in the future. It includes study material, a pattern of Cisco
Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) Exam 300-460 exam, sample
question papers and tips to make the Cisco Implementing and Troubleshooting the Cisco Cloud
Infrastructure (CLDINF) Exam journey successful for you. We hope that you’ll find our services very useful
for your upcoming exam.
300-460 Exam Preparation Material For Best
Result:
Our Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) Exam 300-460
exam dumps has been designed to enlighten the candidate about the whole thing. We make it sure that
candidate is well aware of Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure
(CLDINF) Exam 300-460 exam scope. The whole plan focuses on the preparation and guidance of a
candidate until they are satisfied. The Cisco Implementing and Troubleshooting the Cisco Cloud
Infrastructure (CLDINF) Exam 300-460 exam dumps includes all the important areas which you need to
focus on if you want to get Cisco certification. Dumps4Success believes that the student deserves to
know every challenge regarding Cisco Implementing and Troubleshooting the Cisco Cloud Infrastructure
(CLDINF) Exam 300-460 exam which he/she has to face in future. If we acknowledge everything clearly in
the start then it becomes easy for the candidate to prepare himself.
100 % Success Cisco 300-460 Exam Dumps:
The 300-460 exam is prepared by experts who have been in this field for years. They are well aware of
the pattern of exam and relevant study material. In fact, many of the writers have designed the Cisco
Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) Exam 300-460 themselves.
https://www.dumps4success.com/
They are expert in training a beginner to get an adequate understanding of Cisco course outline. So, with
the help of Dumps4Success guide, you are very much likely to get Cisco certification in the first attempt.
300-460 Cisco Implementing and Troubleshooting
the Cisco Cloud Infrastructure (CLDINF) Exam
Exam Quick Tips:
Many students rely on the internet for the preparation of Cisco Implementing and Troubleshooting the
Cisco Cloud Infrastructure (CLDINF) Exam 300-460 exam. Well, you can get study materials from the
internet but it is always the possibility that you are missing out something. On the other hand
Dumps4Success is offering you complete package in one deal. You do not have to look into different
websites and libraries to collect all the study material. You can get everything just a click away with this
guide. Rather than wasting your time & effort on finding different sources for EN, you can just rely on our
guidebook to assist you in every way.
100% Money Back Guarantee:
Dumps4Success cares about the candidate and want to facilitate them in every way. Although our plan
will help you in getting more than passing marks for Cisco 300-460 exam, if the candidate is unable to
pass the 300-460 exam after taking the sessions of our 300-460 exam dumps, then we can refund your
money under certain terms & conditions.
https://www.dumps4success.com/
20% Discount on Cisco 300-460 Exam Dumps. For more info https://www.dumps4success.com/300460.html
https://www.dumps4success.com/
Version: 9.0
Question: 1
In which two ways can a cloud administrator dynamically increase a VMFS datastore? (Choose two.)
A. Add a new local storage disk on ESXi and restart VMFS service.
B. Expand the datastore within the extent.
C. Rescan all hosts to see the current storage and modify the extent.
D. Add an extent (LUN).
Answer: BD
Question: 2
Which three boot policies can be created for Cisco UCS Manager in Cisco UCS Director? (Choose three.)
A. VLAN boot
B. UEFI secure boot
C. iSCSI boot
D. NFS boot
E. SAN boot
F. FCOE boot
Answer: ACE
Reference:
Various boot options are:
SAN Boot
LAN Boot
Local Disk Boot
Virtual Media Boot
iSCSI Boot
Question: 3
During which process are Cisco UCS UUID, MAC, and WWPN identifiers allocated from the pool?
A. service profile instantiation
B. server boot time
C. service profile assignment to a server
https://www.dumps4success.com/
D. service profile template creation
Answer: C
Question: 4
A Cisco UCSM administrator is tasked with modifying the boot order in a service profile. Which option
lists the steps required to accomplish this task?
A. In the Navigation pane, click the Servers tab.
On the Servers tab, expand Servers > Service Profiles.
Click the service profile for which you want to change boot order.
Click Boot Order Wizard to change the existing boot policy.
B. In the Navigation pane, click the Servers tab.
On the Servers tab, expand Servers > Service Profiles.
Click the service profile for which you want to change boot order.
Click Boot Security.
Click Modify Boot Policy to change the existing policy.
C. In the Navigation pane, click the Servers tab.
On the Servers tab, expand Servers > Service Profiles.
Click the service profile for which you want to change boot order.
Click Modify Boot Policy to change the existing boot policy.
D. In the Navigation pane, click the Servers tab.
On the Servers tab, expand Servers > Service Profiles.
Click the service profile for which you want to change boot order.
Click Boot Order and the Modify Boot Policy wizard displays.
Change the existing boot policy.
Answer: D
Question: 5
Which option lists the number of segments that are supported by VxLAN as standardized in RFC7348 and
the number of bytes of overhead that are added to the original frame?
A. 1 million; 50
B. 16 million; 50
C. 1 million; 48
D. 16 million; 48
Answer: B
Reference:
https://tools.ietf.org/html/rfc7348
https://www.dumps4success.com/
Question: 6
Which option lists the steps to configure a Cisco UCS B-Series server for jumbo frames and the Cisco
Discovery Protocol?
A. On the Servers tab, set CDP enabled under the vNIC interface.
Set the vHBA MTU to 9000.
Assign the network control policy to the vHBA.
B. On the Servers tab, create a network control policy with CDP enabled.
On the vNIC select the jumbo-frame checkbox.
Assign the network control policy to the vNIC.
C. On the LAN tab, create a network control policy with CDP enabled.
Create a vNIC with an MTU of 9000.
Assign the network control policy to the vNIC.
D. On the LAN tab, create a vHBA template with an MTU of 9216.
Select the CDP checkbox.
Assign the network control policy to the vHBA.
Answer: D
Question: 7
With which three types of zoning can a Cisco UCS domain be configured? (Choose three.)
A. cloud-based Fibre Channel zoning
B. Cisco UCS local Fibre Channel zoning
C. hybrid-based Fibre Channel zoning
D. switch-based Fibre Channel zoning
E. no zoning
F. vBlock-based Fibre Channel zoning
Answer: BDE
Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/
b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_011011.pdf
Question: 8
Which three statements about server pools are true? (Choose three.)
A. Cisco USC Director Displays only the managed servers in a server pool, but the size of the pool
includes all servers.
B. Servers pools cannot be assigned to a Cisco USC Director group.
C. A given server can belong only to a specific server pool.
https://www.dumps4success.com/
D. A server pool contains a set of servers that share the same attributes such as server type, amount of
memory, local storage, type of CPU, or local drive configuration.
E. A server pool only includes servers from a specific chassis in the system.
F. If your system implements multitenansy through organizations, you can designate one ore more server
pools to be used by a specific organization.
Answer: ADF
Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/ucs-mgmt-guide/4-0/
b_Cisco_UCS_Director_UCS_Management_Guide_40/
b_Cisco_UCS_Director_UCS_Management_Guide_40_chapter_0110.html
Question: 9
A Cisco USC Director administrator is configuring his pod on the Physical > Compute Tab. Which three
tabs are available under this menu? (Choose three.)
A. UCS Chassis
B. Datastore Capacity Report
C. CloudSense
D. Chargeback
E. Compute Servers
F. Compute Accounts
Answer: AEF
Reference:
https://www.dumps4success.com/
Question: 10
Which four options are required on a DCHP server to enable PXE boot? (Choose four.)
A. boot server host name (TFTP server hostname or IP address)
B. subnet mask
C. DNS server
D. lease time
E. domain name
F. bootfile name
G. router (Gateway)
Answer: ABCG
Reference:
Refer
to
table
1
of
the
link:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucsdirector/bma-install-config/41/b_ucsd_bma_install_config_guide_41/b_ucsd_bma_install_config_guide_41_chapter_0100.html
Question: 11
A Cisco USC Director administrator is viewing the workflow input and output status of a service request.
Which option lists the steps that accomplish this task?
A. On the menu bar, choose Organizations > My Approvals.
Choose a user group.
Click the Service Request tab.
https://www.dumps4success.com/
Choose a service request.
Click View Details, and choose the Log tab.
B. On the menu bar, choose Organizations > Virtual Resources.
Click the Service Requests tab.
Choose the service request.
Click View Details, and choose the Input/Output tab.
C. On the menu bar, choose Organizations > Service Requests.
Click the Service Requests tab.
Choose the service request.
Click View Details, and choose the Input/Output tab.
D. On the menu bar, choose Organizations > Service Requests.
Choose a user group.
Click the Service Request tab.
Choose a service request.
Click View Details, and choose the Log tab.
Answer: D
Reference:
http://www.cisco.com/c/en/us/td/docs/cloud-systems-management/intercloud-fabric/2-12/userguide/icf/b_Cisco_Intercloud_Fabric_User_Guide_Release_2_1_2/b_Cisco_Intercloud_Fabric_Us
er_Guide_Release_2_0_chapter_01000.html
https://www.dumps4success.com/
Thank You for trying 300-460 PDF Demo
To try our 300-460 practice exam software visit link below
https://www.dumps4success.com/300-460.html
Start Your 300-460 Preparation
20OFF
” for special 20%
[Limited Time Offer] Use Coupon “
discount on your purchase. Test your 300-460 preparation with actual
exam questions.
https://www.dumps4success.com/