300-320-Exam-Dumps

Actual Cisco 300-320 Exam Dumps Updated 2019
20% Discount on Cisco 300-320 Exam Dumps. For more info https://www.dumps4success.com/300320.html
Cisco Designing Cisco Network Service Architectures Exam 300-320 preparation is not a piece of cake for
the professionals or full-time office workers as you actually need to invest time and mind for its
preparation. No doubt EN is very effort taking and difficult exam but it is not impossible to clear it.
Dumps4Success offers Cisco Designing Cisco Network Service Architectures Exam 300-320 exam dumps
that includes guidelines and information according to the Cisco 300-320 exam. The Cisco Designing Cisco
Network Service Architectures Exam 300-320 exam dumps involve content and instructions which are
explicitly designed to assist you in getting through the 300-320 exam.
The 300-320 Cisco Designing Cisco Network Service Architectures Exam exam practice material includes
everything that covers the Cisco course content and prepares the candidate for all the possibilities in the
future. It includes study material, a pattern of Cisco Designing Cisco Network Service Architectures Exam
300-320 exam, sample question papers and tips to make the Cisco Designing Cisco Network Service
Architectures Exam journey successful for you. We hope that you’ll find our services very useful for your
upcoming exam.
300-320 Exam Preparation Material For Best
Result:
Our Cisco Designing Cisco Network Service Architectures Exam 300-320 exam dumps has been designed
to enlighten the candidate about the whole thing. We make it sure that candidate is well aware of Cisco
Designing Cisco Network Service Architectures Exam 300-320 exam scope. The whole plan focuses on
the preparation and guidance of a candidate until they are satisfied. The Cisco Designing Cisco Network
Service Architectures Exam 300-320 exam dumps includes all the important areas which you need to
focus on if you want to get Cisco certification. Dumps4Success believes that the student deserves to
know every challenge regarding Cisco Designing Cisco Network Service Architectures Exam 300-320
exam which he/she has to face in future. If we acknowledge everything clearly in the start then it
becomes easy for the candidate to prepare himself.
100 % Success Cisco 300-320 Exam Dumps:
The 300-320 exam is prepared by experts who have been in this field for years. They are well aware of
the pattern of exam and relevant study material. In fact, many of the writers have designed the Cisco
Designing Cisco Network Service Architectures Exam 300-320 themselves. They are expert in training a
beginner to get an adequate understanding of Cisco course outline. So, with the help of Dumps4Success
guide, you are very much likely to get Cisco certification in the first attempt.
https://www.dumps4success.com/
300-320 Cisco Designing Cisco Network Service
Architectures Exam Exam Quick Tips:
Many students rely on the internet for the preparation of Cisco Designing Cisco Network Service
Architectures Exam 300-320 exam. Well, you can get study materials from the internet but it is always
the possibility that you are missing out something. On the other hand Dumps4Success is offering you
complete package in one deal. You do not have to look into different websites and libraries to collect all
the study material. You can get everything just a click away with this guide. Rather than wasting your
time & effort on finding different sources for EN, you can just rely on our guidebook to assist you in every
way.
100% Money Back Guarantee:
Dumps4Success cares about the candidate and want to facilitate them in every way. Although our plan
will help you in getting more than passing marks for Cisco 300-320 exam, if the candidate is unable to
pass the 300-320 exam after taking the sessions of our 300-320 exam dumps, then we can refund your
money under certain terms & conditions.
20% Discount on Cisco 300-320 Exam Dumps. For more info https://www.dumps4success.com/300320.html
https://www.dumps4success.com/
Version: 27.0
Question: 1
Where should loop guard the implemented in a campus network design?
A. Ports configured with port fast
B. Alternate ports only
C. Ports configured with root guard
D. Alternate, backup and root ports
Answer: D
Question: 2
Refer to the exhibit.
An engineer must apply IP addressing to five new WAN sites and choses the new subnets pictured. The
previous administrator applied the addressing at Headquarters. Whitch option is the minimum summary
range to cover the existing WAN sites while also allowing for three additional WAN sites of the same
size, for future growth?
A. 10.0.60.0/18
B. 10.0.64.0/21
C. 10.0.64.0/17
https://www.dumps4success.com/
D. 10.0.0.0/17
E. 10.0.64.0/18
Answer: E
Question: 3
Which two options are features of a scalable cluster design utilizing Cisco ASA firewalls?
(Choose two)
A. Each cluster supports up to 10 ASA devices.
B. The design supports up to 100 Gbps of aggregate traffic.
C. Each member of the cluster can forward every traffic flow.
D. The design supports up to 1 Terabyte of aggregate traffic.
E. The ASA cluster actively load balances traffic flows.
Answer: BC
Question: 4
Which action should be taken when implementing a preferred IPS design?
A. Place the management interface on a separate VLAN
B. Place all sensors on PVLAN community ports
C. Place the management interface on the same VLAN
D. Place the monitoring interface on the inside network
Answer: A
Question: 5
How does OTV provide STP isolation?
A. By using STP root optimization
B. By using BPDU guard
C. By dropping BPDU packets
D. By using BPDU filtering
Answer: C
https://www.dumps4success.com/
Question: 6
A LAN infrastructure consists of switches from multiple vendors. Spanning Tree is used as a Layer 2 loop
prevention mechanism. All configured VLANs must be grouped in two STP instances. Which standardsbased Spanning Tree technology must be used?
A. MSTP
B. Rapid PVST
C. STP
D. RSTP
Answer: A
Question: 7
An engineer is working on an OSPF network design and wants to minimize the failure detection time and
the impact on the router CPU. Witch technology accomplishes this goal?
A. LSA pacing
B. LSA delay interval
C. BFD
D. Fast hellos
Answer: C
Question: 8
An engineer wants to assure that host can locate routers that can be used as a gateway to reach IPbased
devices on other networks. Which first hop redundancy protocol accomplishes this goal?
A. VRRP
B. GLBP
C. IRDP
D. HSRP
E. GSLB
Answer: A
Question: 9
https://www.dumps4success.com/
What added enforcement feature is available on IDS-based devices to terminate active malicious traffic?
A. Signature detection
B. TCP reset
C. SNMP alert
D. Layer 4 filtering
Answer: B
Question: 10
An CSPF router should have a maximum of how many adjacent neighbors?
A. 80
B. 60
C. 100
D. 50
Answer: B
Question: 11
While configuring a QoS policy, analysis of the switching infrastructure indicates that the switches
support 1P3Q3T egress queuing. Which option describes the egress queuing in the infrastructure?
A. The threshold configuration allows for inter-queue QoS by utilizing buffers.
B. The priority queue must contain real-time traffic and network management traffic.
C. The 1P3Q3T indicates one priority queue, three standard queues, and three thresholds.
D. The priority queue should use less than 20% of the total bandwidth.
Answer: B
Question: 12
An engineer is redesigning the infrastructure for a campus environment. The engineer must maximize
the use of the links between the core and distribution layers. By which two methods can this usage be
maximized? (Choose two.)
A. Design the links between the core and distribution layers to use RPVSTP+
B. Design with multiple unequal-cost links between the core and distribution layers.
C. Design the links between the core and distribution layers to use an IGP
D. Design the links between the core and distribution layers to use HSRP.
https://www.dumps4success.com/
E. Design with multiple equal-cost links between the core and distribution layers.
Answer: A, D
Question: 13
Which two characteristics of the 802.1X standard are true? (Choose two.)
A. This standard supports only wired LANs.
B. It can package EAP messages in Ethernet frames and not use PPP.
C. It was created by IEEE
D. It was created by IETF
E. Its EAP messages always require underlying PPP protocol
Answer: B, C
Question: 14
An engineer must create this design:
• Restrict certain networks from being advertised to remote branches connected via eBGP.
• Prohibit advertisement of the specific prefix to external peers only.
Which BGP community must be configured to meet these requirements?
A. no-advertise
B. no-export
C. internet
D. gshut
E. local-as
Answer: B
Question: 15
Which design technology allows two Cisco Catalyst chassis to use SSO and NSF to provide nonstop
communication even if one of the member chassis fails?
A. peer gateway
B. VSS
C. vPC
D. auto chassis detect
Answer: B
https://www.dumps4success.com/
Question: 16
An engineer is designing a redundant dual-homed BGP solution that should prefer one specific carrier
under normal conditions. Traffic should automatically fail over to a secondary carrier in case of a failure.
Which two BGP attributes can be used to achieve this goal for inbound traffic?
A. AS-PATH
B. weight
C. origin
D. local preference
E. MED
Answer: A, E
Question: 17
A large scale IP SLA deployment is causing memory and CPU shortages on the routers in an enterprise
network. Which solution can be implemented to mitigate these issues?
A. a shadow router
B. a CPE device that is managed by the network provider
C. a standby router for failover operation
D. an offline router for disaster recovery
Answer: A
Question: 18
An engineering team must design a firewall solution with shared hardware resources but separation of
features such as ACLs, NATs, and management between the external business partners of the
organization.
Which
ASA
deployment
mode
meets
these
requirements?
A. clustering mode
B. multicontext mode
C. transparent mode
D. routed mode
Answer: B
https://www.dumps4success.com/
Question: 19
A network team is designing a Layer 3 Data Center Interconnect between two data centers. There is a
requirement for all links of equal bandwidth be utilized have automatic failover and not use any bundling
technology. Which routing function must be used to achieve this requirement?
A. virtual links
B. virtual private LAN service
C. policy-based routing
D. BGP route reflectors
E. equal cost multipath routing
Answer: E
Question: 20
A company is multihomed to different service providers running BGP. Which action ensures that the
company AS does not become a transit AS?
A. Create a prefix list that matches the company prefix(es) and applies to both BGP neighbor definitions
in the outbound direction.
B. Create a distribute list that filters all routes except the default route and applies to a single BGP
neighbor in the outbound direction.
C. Create a route map that matches the provider BGP communities and networks and applies to both
BGP neighbor interfaces in the outbound direction.
D. Create a distribute list that filters all routes except Ihe default route and applies to both BGP neighbor
interfaces in the inbound direction.
Answer: A
Question: 21
Refer to the exhibit.
An engineering team is analyzing the WAN connection for a site that has a 50 Mbps Ethernet circuit.
https://www.dumps4success.com/
Which technology should be uses to keep the router from overrunning the carrier's 50 Mbps rate?
A. shaping
B. Access Control List
C. Committed Information Rate
D. Rate-Limit
E. Policing
Answer: C
Question: 22
An engineer is trying to minimize the number of EIGRP routes within an infrastructure. Which command
achieves automatic summarization?
A. ip summary-address eigrp 1 10.0.0.0 255.0.0.0
B. area 0 range 10.0.0.0 255.0.0.0
C. ip summary-address 10.0.0.0 255.0.0.0
D. router eigrp 1
E. eigrp stub
Answer: A
Question: 23
Transition to Named EIGRP without causing an outage?
A. router eigrp NAME
B. router eigrp 1 named NAME
C. router eigrp 1
eigrp upgrade-cli NAME
D. interface fa0/1
ip router eigrp 1 named NAME
Answer: C
Question: 24
HSRP. Router 1 (master) and Router 2 (standby), same priority. When router 1 f0/1 (outside interface)
down. With which tracking commands the Router 2 will be able to preempt ? (Choose Two)
A. Track 50
https://www.dumps4success.com/
B. Track 50 decrement 20
C. ip tracking 50 interface f0/1 reachability
D. ip tracking 50 Interface f0/1 ip routing (or line protocol)
Answer: B, D
Question: 25
Design QoS (traffic regulation mechanisms ? )(Choose Two)
A. Classification
B. Shaping
C. Policing
D. Queuing
Answer: B, C
Question: 26
With which of the following could EIGRP and OSPF achieve sub second convergence ? (Choose Two)
A. BFD
B. Triangle topology
C. Square topology
D. Ring topology
E. Tuning timers
F. IP SLA
Answer: A, B
Question: 27
NAC: Simple access control at user and device contextual level. Which features are needed ? (Choose
Two)
A. secure access control
B. TrustSec
C. ISE
D. NAC agent
Answer: C, D
https://www.dumps4success.com/
https://www.dumps4success.com/
Question: 28
Multicast has been configured and enabled within an Enterprise network. PIM spare-mode has been
enabled on all VLANs. What feature is required to stop multicast traffic from being broadcasted on the
access layer switches?
A. Multicast boundary filter
B. PIM Dense-Mode
C. IGMP snooping
D. Dynamic ARP inspection
Answer: C
Explanation:
"Cisco Group Management Protocol (CGMP), Router Group Management Protocol (RGMP), and IGMP
snooping efficiently constrain IP multicast in a Layer 2 switching environment"
Question: 29
A customer with a single Cisco Adaptive Security Appliance wants to separate multiple segments of the
ecommerce network to allow for different security policies. What firewall technology accommodates
these design requirements?
A. Routed mode
B. Virtual-context
C. Transparent mode
D. Virtual private network
E. private VLANs
F. admission control
Answer: B
Question: 30
Design for data center where you don't have to dedicate one switch per rack?
A. Top of rack
B. End of row
C. Blade Switch
D. Middle of row
https://www.dumps4success.com/
Answer: B
https://www.dumps4success.com/
Thank You for trying 300-320 PDF Demo
To try our 300-320 practice exam software visit link below
https://www.dumps4success.com/300-320.html
Start Your 300-320 Preparation
20OFF
” for special 20%
[Limited Time Offer] Use Coupon “
discount on your purchase. Test your 300-320 preparation with actual
exam questions.
https://www.dumps4success.com/