300-370-Exam-Dumps

Actual Cisco 300-370 Exam Dumps Updated 2019
20% Discount on Cisco 300-370 Exam Dumps. For more info https://www.dumps4success.com/300370.html
Troubleshooting Cisco Wireless Enterprise Networks Exam 300-370 preparation is not a piece of cake for
the professionals or full-time office workers as you actually need to invest time and mind for its
preparation. No doubt EN is very effort taking and difficult exam but it is not impossible to clear it.
Dumps4Success offers Troubleshooting Cisco Wireless Enterprise Networks Exam 300-370 exam dumps
that includes guidelines and information according to the Cisco 300-370 exam. The Troubleshooting
Cisco Wireless Enterprise Networks Exam 300-370 exam dumps involve content and instructions which
are explicitly designed to assist you in getting through the 300-370 exam.
The 300-370 Troubleshooting Cisco Wireless Enterprise Networks Exam exam practice material includes
everything that covers the Cisco course content and prepares the candidate for all the possibilities in the
future. It includes study material, a pattern of Troubleshooting Cisco Wireless Enterprise Networks Exam
300-370 exam, sample question papers and tips to make the Troubleshooting Cisco Wireless Enterprise
Networks Exam journey successful for you. We hope that you’ll find our services very useful for your
upcoming exam.
300-370 Exam Preparation Material For Best
Result:
Our Troubleshooting Cisco Wireless Enterprise Networks Exam 300-370 exam dumps has been designed
to enlighten the candidate about the whole thing. We make it sure that candidate is well aware of
Troubleshooting Cisco Wireless Enterprise Networks Exam 300-370 exam scope. The whole plan focuses
on the preparation and guidance of a candidate until they are satisfied. The Troubleshooting Cisco
Wireless Enterprise Networks Exam 300-370 exam dumps includes all the important areas which you
need to focus on if you want to get Cisco certification. Dumps4Success believes that the student
deserves to know every challenge regarding Troubleshooting Cisco Wireless Enterprise Networks Exam
300-370 exam which he/she has to face in future. If we acknowledge everything clearly in the start then
it becomes easy for the candidate to prepare himself.
100 % Success Cisco 300-370 Exam Dumps:
The 300-370 exam is prepared by experts who have been in this field for years. They are well aware of
the pattern of exam and relevant study material. In fact, many of the writers have designed the
Troubleshooting Cisco Wireless Enterprise Networks Exam 300-370 themselves. They are expert in
training a beginner to get an adequate understanding of Cisco course outline. So, with the help of
Dumps4Success guide, you are very much likely to get Cisco certification in the first attempt.
https://www.dumps4success.com/
300-370 Troubleshooting Cisco Wireless Enterprise
Networks Exam Exam Quick Tips:
Many students rely on the internet for the preparation of Troubleshooting Cisco Wireless Enterprise
Networks Exam 300-370 exam. Well, you can get study materials from the internet but it is always the
possibility that you are missing out something. On the other hand Dumps4Success is offering you
complete package in one deal. You do not have to look into different websites and libraries to collect all
the study material. You can get everything just a click away with this guide. Rather than wasting your
time & effort on finding different sources for EN, you can just rely on our guidebook to assist you in every
way.
100% Money Back Guarantee:
Dumps4Success cares about the candidate and want to facilitate them in every way. Although our plan
will help you in getting more than passing marks for Cisco 300-370 exam, if the candidate is unable to
pass the 300-370 exam after taking the sessions of our 300-370 exam dumps, then we can refund your
money under certain terms & conditions.
20% Discount on Cisco 300-370 Exam Dumps. For more info https://www.dumps4success.com/300370.html
https://www.dumps4success.com/
Version: 9.0
Question: 1
Refer to the exhibit.
A client reports being unable to log into the wireless network According to the output, which network
information should be verified?
A. the Failed Attempts log on the authentication server
B. that the AP has IP connectivity to the authentication server
C. that the user has an account on the authentication server
D. that the authentication and accounting configuration are correct
Answer: B
Question: 2
Refer to the exhibit.
https://www.dumps4success.com/
A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues
appear in the output? (Choose two)
A. The AP has the incorrect RADIUS server address
B. There is a problem with the client supplicant
C. The AP has lost IP connectivity to the authentication server
D. The authentic at ion server is misconfigured on the controller
E. The EAP client timeout value should be increased
F. The authentication server is misconfigured in the WLAN
Answer: AC
Question: 3
An engineer must open a support case with Cisco TAC. Which two commands verify the model and serial
number of a controller? (Choose two)
A. show sysinfo
B. show udi
C. show inventory
D. show boot
E. show tech-support
Answer: AB
Question: 4
While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband
jammer is not sending its Interferer Security Trap correctly. The engineer determines that the default
seventy level has been changed. Which value does the engineer select to reset the seventy level to its
factory setting?
A. informational
B. major
C. minor
https://www.dumps4success.com/
D. warning
E. critical
Answer: D
Question: 5
An engineer is using various techniques to discover and isolate rogues on the network. For which
technique must the engineer consider legal ramifications?
A. rogue AP containment
B. RF detection
C. switch port tracing
D. wire detection
E. Cisco Prime Infrastructure location services
Answer: A
Question: 6
Which Cisco WLC debug command allows you to determine if the certificate process is failing in the
CAPWAP messages?
A. debug pm pki enable
B. debug cert events enable
C. debug capwap events enable
D. debug capwap packet enable
E. debug capwap errors enable
Answer: E
Question: 7
Which channel width is the maximum that can be obtained by bonding two 802.11 ac subchannels
according to US regulations?
A. 160 MHz
B. 120 MHz
C. 84 MHz
D. 240 MHz
Answer: A
Explanation:
To increase throughput, 802.11ac introduces two new channel widths. All 802.11ac devices are required
https://www.dumps4success.com/
to support 80 MHz channels, which doubles the size of the spectral channel over 802.11n. It further adds
a 160 MHz channel option for even higher speeds. Due to the limitations of finding contiguous 160 MHz
spectrum, the standard allows for a 160 MHz channel to be either a single contiguous block or two
noncontiguous 80 MHz channels.
References:
Question: 8
Scenario
The big Engineering IT team has been in the lab to test some new features that the existing network
does not support. The AP Groups, AP Failover, and Local Web Auth features are having problems. In this
test environment, the controllers support the only Composite Structural Engineering and Aerodynamic
Engineering groups. All SSIDs must omit the department name.
Refer to the exhibit. The diagram is the floor plan for the Big Engineering office and the distribution of
the departments. These tables show how the controllers have been configured.
Note, not all menu items, text boxes, or radio buttons are active.
BE-GA
Controller Management Interfaces
Composite and Structural Engineering (CSE)
WLANs
https://www.dumps4success.com/
AP Groups-CSE-WLANs
AE-User Names and Passwords
You review the configuration of the test network controller. Which four changes must be made to resolve
the problems? (Choose four.)
When you review the configuration of the test network controller what needs to be changed to resolve
the problems? (Choose four.)
A. Change the High Availability Primary Controller Management Interface IP address.
B. Remove the current WLANs and replace them with WLANs that have the same SSID names as on the
AE-2504A controller.
C. Add the Local Net User names and passwords
D. Change the Layer 2 security to none and Layer 3 Security to Web Policy for the CSE-Contractors WLAN
E. Remove me current WLAN from the CSE-WLAN AP Group and add all three of the WLANs configured
in the CSE-2504A
F. Add the CSE APs to the CSE-WLANs AP-Group.
Answer: B, C, D, F
Question: 9
Which two statements about the WLAN are true? (Choose two)
https://www.dumps4success.com/
Refer to the exhibit.
A. The client has a 5 GHz connection.
B. The client has authenticated.
C. The client is 802.11n capable.
D. The Cisco device is a 3600 series AP.
E. 802 11b data rates are disabled in this WLAN
Answer: CE
https://www.dumps4success.com/
https://www.dumps4success.com/
Thank You for trying 300-370 PDF Demo
To try our 300-370 practice exam software visit link below
https://www.dumps4success.com/300-370.html
Start Your 300-370 Preparation
20OFF
” for special 20%
[Limited Time Offer] Use Coupon “
discount on your purchase. Test your 300-370 preparation with actual
exam questions.
https://www.dumps4success.com/