SNR ball bearing units with cast iron or pressed - NTN

Transcription

couvGBc:couv
4/12/08
15:38
Page 2
TC 09 GBc
© SNR 2006
SNR ball bearing units with cast
iron or pressed steel housings
Industry
couvGBc:couv
4/12/08
15:38
Page 3
General
SNRNos
ballpaliers
bearings’alignent…
unitssur
toutes
attentes.
more
than
just vos
conventional
More than just conventional - not only words for
us! Since more than 35 years SNR is a leading
manufacturer of ball bearing units and thus has a
large pool of experience in various applications for
machine and plant construction.
Besides an extensive conventional standard range SNR developed a variety of special custom-built
solutions.
That means different surface treatments, as e.g.
special painting, zinc or nickel coating, various
fixing or sealing systems for the bearing inserts,
particular dimensions or housing design - just more
than only conventional
In this catalogue you will find the SNR standard
range for ball bearing units with cast iron and pressed steel housings.
Housings are made of grey cast iron or sheet steel.
The surface of the grey cast iron housings is passivated and painted for protection against corrosion. Pressed steel housings are zinc-plated.
In addition there is an option to provide grey cast
iron housing units with open or closed protective
caps made of stainless steel.
The SNR standard range also includes bearing
units for high and low temperature.
In case the capacity of the series 200 is not sufficient, the engineer can select different bearing
units of the series 300. Here various shaft fixing
options are available, too.
In cases, where the customer can't find an appropriate bearing for his application in this catalogue
or the catalogues "SNR bearing units of stainless
steel" or "SNR bearing units with thermoplastic
housings" there still is the option to design a
custom-built solution together with SNR.
In those cases please contact one of our sales offices. Finally you will find:
SNR ball bearing units more than just conventional.
SNR bearing inserts are equipped with forged rings.
This forming technology is favourable for bearing
life.
The inserts are deep groove ball bearings with spherical outer rings that can compensate misalignment
and flexion of shafts to a certain extent. Fixing to
the shaft is by means of set screws, eccentric lokking collar or adapter sleeve. SNR gives in addition the option for mounting in floating position.
For surroundings with strong contamination bearing inserts with triple lip seal L3 are available.
Although great care was taken during the preparation of this publication we cannot accept any responsibility for any mistakes or
omissions. Subject to technical change.
1ere partie GBc:Vorlage-GB
4/12/08
14:53
Page 3
SNR Industry
3
Contents
Page
1. General
Foreword
Overview, range of units
Designation scheme
Prefixes and suffixes
Housing designs
....................................
...................................
....................................
....................................
....................................
2
4-5
6
7
8-9
2. SNR Ball Bearing Units
Grey cast iron ball bearing units
Design
Materials/Surfaces
Load capacity
Pressed steel housings
Design
Materials/Surfaces
Load capacity
Bearing inserts
Design
Materials
Options for shaft fixing
Tightening torques
Seals
Operating temperature
Bearing clearance
Axial load capacity of bearing inserts
Load ratings and speed limits
Life calculation
Protective caps
Designs
Materials
Fixing on the housing
Assembly
Seals
Units
Designs
Assembly
Lubrication and maintenance
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
...................................
10
11
12 - 13
14
15
15
16 - 17
18
19 - 21
22
23
24
24
25
25
26 - 28
29
29
29
30
30
...................................
...................................
...................................
...................................
...................................
...................................
...................................
31
31 - 33
34
...................................
...................................
36 - 159
160 - 183
3. Dimension tables
Ball bearing units
Bearing inserts
4. Tolerances and Fixing of housings
Tolerances for grey cast iron housings
Tolerances for pressed steel housings
Fixing of housings
Tolerances of bearing inserts
...................................
...................................
...................................
...................................
184 - 189
190 - 191
192
193 -195
...................................
196
...................................
...................................
197
198
5. Custom-built bearing units
Custom-built bearing units
6. Tables
Conversion table inch – mm
Conversion table mm – inch
4/12/08
14:54
Page 4
General
UK200+H
164
Protective
caps
Page
EX200
163
Page
ES200
162
Page
US200
161
Page
UC200
160
Page
Inserts
Page
Page
Nos paliers
Overview,
ranges’alignent…
of units
toutes
vos attentes.
Greysur
cast iron
units, series
200
Take-up-, cartridge- and
hanger units
Flanged units
Pillow block units
Housings
SNR Industry
4
PE
UCPE
36 USPE
36 ESPE
36 EXPE
36 UKPE+H
36 CO/CC
36
PLE
UCPLE
40 USPLE
40 ESPLE
40 EXPLE
40 UKPLE
40 CO/CC
40
P
UCP
44 USP
44 ESP
44 EXP
44 UKP+H
44 CO/CC
44
PH
UCPH
52 USPH
52 ESPH
52 EXPH
52 UKPH+H
52 CO/CC
52
PAE
UCPAE
56 USPAE
56 ESPAE
56 EXPAE
56 UKPAE+H
56 CO/CC
56
PG
UCPG
60 USPG
60 ESPG
60 EXPG
60 UKPG+H
60 CO/CC
60
PA
UCPA
64 USPA
64 ESPA
64 EXPA
64 UKPA+H
64
FE
UCFE
68 USFE
68 ESFE
68 EXFE
68 UKFE+H
68 CO/CC
68
F
UCF
72 USF
72 ESF
72 EXF
72 UKF+H
72 CO/CC
72
FCE
UCFCE
80 USFCE
80 ESFCE
80 EXFCE
80 UKFCE+H
80
FC
UCFC
84 USFC
84 ESFC
84 EXFC
84 UKFC+H
84 CO/CC
84
96 UKFLE+H
96 CO/CC
96
FEE
USFEE
88 ESFEE
88
FTE
USFTE
94 ESFTE
94
96 USFLE
96 ESFLE
96 EXFLE
FLE
UCFLE
FL
UCFL
100 USFL
100 ESFL
100 EXFL
100 UKFL+H
100 CO/CC 100
FLZ
UCFLZ
108 USFLZ
108 ESFLZ
108 EXFLZ
108 UKFLZ+H
108
FD
USFD
112 ESFD
112
FAE
USFAE
114 ESFAE
114
FA
UCFA
116 USFA
116 ESFA
116 EXFA
116 UKFA+H
116 CO/CC 116
T
UCT
120 UST
120 EST
120 EXT
120 UKT+H
120 CO/CC 120
T+WB
UCT+WB 128 UST+WB 128 EST+WB
128 EXT+WB 128 UKT+H+WB 128 CO/CC 128
SP
UCSP
132 USSP
132 ESSP
132 EXSP
132 UKSP+H
132 CO/CC 132
SPR
1 – 24
136
C
UCC
138 USC
138 ESC
138 EXC
138 UKC+H
138
EHE
UCEHE
146 USEHE
146 ESEHE
146 EXEHE
146 UKEHE+H
146
4/12/08
14:54
Page 5
SNR Industry
5
Take-up- and
cartridge units
Flanged
units
Pillow
block
units
EX300
166
UK300+H
167
Page
UC300
165
Page
Inserts
Page
Page
Grey cast iron units, series 300
Housings
P
UCP
44
EXP
44
UKP+H
44
F
UCF
72
EXF
72
UKF+H
72
FS
UCFS
90
EXFS
90
UKFS+H
90
FL
UCFL
100
EXFL
100
UKFL+H
100
T
UCT
120
EXT
120
UKFL+H
120
C
UCC
138
EXC
138
UKC+H
138
Page
ES200
162
Page
Pressed steel units, series 200
150
ESPP
150
USPF
152
ESPF
152
PFL
USPFL
154
ESPFL
154
PFT
USPFT
156
ESPFT
156
PFE
USPFE
158
ESPFE
158
Flanged units
Pillow
block
units
Inserts
Page
US200
161
PP
USPP
PF
Housings
168
169
CES200
170
CEX200
Page
CUS200
Page
CUC200
Page
Bearing
Inserts
Page
Bearing inserts with cylindrical outer ring
171
4/12/08
14:55
Page 6
General
Designation scheme
Ball bearing units
Bearing inserts
SNR ball bearing units are defined by the
insert, housing type, and shaft diameter.
The various inserts of SNR ball bearing units
are determined by the initial letters (e.g., “UC”)
The insert is described first for SNR ball bearing
unit designations (e.g., “UC”).
UC205
UCP205
Next is the specification of the housing
type (e.g., “P”).
Detailed information about the different designs
can be found on page 16 and 17.
The first digit describes the diameter series
(200 or 300)
UC205
UCP205
The first digit describes the diameter series
(200 or 300)
UCP205
The last two digits define the bore. The digits
are 1/5 of the bore diameter
(e.g., “04” = 20 mm, “06” = 30 mm).
An exception to this are the smaller bore diameters of 12 to 17 mm.
Finally, the code gives the necessary
information about the shaft diameter
(e.g., “205” = 25 mm shaft diameter).
UCP205
Further technical characteristics are described
by suffixes (see page 7).
Detailed information about the different housing
designs can be found on page 8 and 9 of this
catalogue.
Example
Pillow block units
UCP205CC (one closed and one open protective cap)
UCP205CO (two open protective caps)
Flanged untis
UCF205CC (one closed protective cap)
UCF205CO (one open protective cap)
UC205
Bore
code
01
02
03
04
05
06
:
10
Shaft
diameter
12 mm
15 mm
17 mm
20 mm
25 mm
30 mm
:
50 mm
inch dimension series
The last two digits are a code for the bore
diameter in inches. Exact specifications for diameter can be found in the dimension tables for
bearing inserts starting on page 160.
UC205-16
SNR Industry
6
4/12/08
14:55
Page 7
SNR Industry
7
Prefixes and suffixes
Prefixes and
suffixes
Description
C3
Radial internal clearance larger than normal
C4
Radial internal clearance larger than C3
CC
Closed protective cap made of stainless steel
CO
Open protective cap made of stainless steel with double lip seal
G2
SNR relubrication system
H
Adapter sleeve for bearing inserts with tapered bore
L3
Triple lip seal
M
Metric tapped bore
N
Groove in housing for fixing protective caps
PN
Nickel-plated housing surface
PZ
Zinc-plated housing surface
S
Material stainless steel (Prefix)
T04
Bearing inserts for operating temperatures down to –40 °C
T20
Bearing inserts for operating temperatures up to +200 °C
4/12/08
14:55
Page 8
General
Designation scheme
Housing designs
Design
C200
C300
EHE200
F200
F300
FA200
FAE200
FC200
FCE200
FD200
FE200
FEE200
FL200
FL300
FLE200
FLZ200
FS300
FTE200
SNR Industry
8
Description
Cylindrical cartridge housing made of grey cast iron,
relubricatable
Cylindrical cartridge housing made of grey cast iron,
relubricatable
Hanger housing made of grey cast iron with metric
fixing threads, relubricatable
Square flanged housing made of grey cast iron
with 4 fixing holes, relubricatable
Oval flanged housing made of grey cast iron
with 1 fixing hole and 1 slot, relubricatable
with 1 fixing hole and 1 slot, relubricatable
Round flanged housing made of grey cast iron with centring
rim and 4 fixing holes, relubricatable
Flat oval flanged housing made of grey cast iron
with 2 fixing or tapped bores, relubricatable
Oval flanged housing made of grey cast iron with centring
Square flanged housing made of grey cast iron with
centring rim and 4 fixing holes, relubricatable
Triangular flanged housing made of grey cast iron
Dimension lists
starting on page
138
138
146
72
72
116
114
84
80
112
68
88
100
100
96
108
90
94
4/12/08
14:55
Page 9
SNR Industry
9
Housing designs
Design
P200
P300
PA200
PAE200
PE200
PF200
PFE200
PFL200
PFT200
PG200
PH200
PLE200
PP200
SP200
SPR
T200
T300
WB200
Description
Dimension lists
starting on page
Pillow block housing made of grey cast iron with 2 slotted
holes for fixing, relubricatable
Pillow block housing made of grey cast iron with 2 tapped bores
for fixing from below, relubricatable
Pillow block housing made of grey cast iron with 2 sloted
Round flanged housing made of steel plate
with 3 or 4 fixing holes, not relubricatable
Rectangular Take-up housing made of sheet steel
with 4 slots for fixing, not relubricatable
Oval flanged housing made of sheet steel
with 2 fixing holes, not relubricatable
Triangular flanged housing made of steel steel
with 3 fixing holes, not relubricatable
Pillow block housing made of grey cast iron for raised shaft center
with 2 slotted holes for fixing, relubricatable
Pillow block housing made of sheet steel with 2 fixing
holes, not relubricatable
Conveyor belt tensioner housing made of grey cast iron,
relubricatable
Frame for Conveyor belt tensioner housing made of steel
Take-up housing made of grey cast iron with taking up for
threaded rod and nut, guide groove on both sides, relubricatable
Take-up housing made of grey cast iron with taking up for
threaded rod and nut, guide groove on both sides, relubricatable
Stretcher frame for T200 take-up housing made of steel
44
44
64
56
36
152
158
154
156
60
52
40
150
132
136
120
120
128
4/12/08
14:55
Page 10
SNR Ball Bearing Units
The advantages of SNR grey cast iron
ball bearing units
• Corrosion protection by passivated
and painted surfaces
• Relubricatable
• Self-aligning
• Series 300 in addition for heavy loads
• Comprehensive standard range of units
SNR bearing units are available as pillow block-, flanged-, take-up-, cartridge or hanger unit. These
offer varying options for fixing, such as through bores or tapped bores. All SNR grey cast iron
bearing units have tapped bores for the mounting of lubricating nipples.
Design
Delivery condition
Misalignment
SNR grey cast iron bearing units are supplied
pre-assembled. The fitted insert is lubricated
for life (for further information, refer to the
section “Lubrication and maintenance” starting
on page 34). The tapped bore for mounting of
the lubricating nipple is closed with a plastic
plug. The appropriate lubricating nipple is
separately attached to the unit.
SNR grey cast iron bearing units are self-aligning,
due to their spherically-designed bearing seat.
The mounted insert allows an angular movement
in all directions. That is why shaft misalignment
is compensated up to a certain degree. This selfalignment should only be necessary once, and
must not occur permanently in operation.
if bearing unit should be relubricated
α=±2°
if bearing unit should not be relubricated
α=±5°
bearing units with protective caps
α=±1°
SNR Industry
10
4/12/08
14:56
Page 11
SNR Industry
11
Materials/Surfaces
Painting
Passivation
Grey cast
iron
Material
SNR cast iron housings, depending on type,
are made of quality grey cast iron GG20 or
GG25.
Surfaces
SNR cast iron housings are passivated and
then painted in RAL 5010.
Painting in another colour is available on
request. There is also the option to get SNR
housings zinc or nickel plated.
Would you prefer a custom-built housing?
Does your application require other materials
such as nodular graphite iron or cast steel?
Should your housing be zinc or nickel plated
or do you need your housing in another
colour?
Contact us, we have a lot of experience in
special custom-built solutions. Flexible
production also allows for manufacturing
small quantities.
You will be convinced by our short term of
delivery times.
SNR ball bearing units – more than just
conventional!
4/12/08
14:56
Page 12
Load capacity
SNR housings permit the complete utilization of the bearing insert load rating. The specified radial
dynamic load rating of the inserts can be presumed as the maximum radial load capacity of the unit.
For the housings of the T200 and T300 series the radial dynamic load rating must be multiplied by
a factor of 0.3.
The maximum axial load capacity of the inserts is 0.5 x C0r (radial static load rating).
The following safety factors must be taken into consideration for various types of stress:
Type of stress
Constant load
Dynamic load
Moderate shock load
High shock load
SNR Industry
12
Safety factor
1
1 – 1.5
2
>3
4/12/08
14:56
Page 13
SNR Industry
13
Radial dynamic load carrying capacity [kN]
Radial dynamic load ratings (Cr) for
inserts of the series
UC200 / UC300 / US200 / ES200
EX200 / EX300 / UK200 / UK300
Bore diameter [mm]
4/12/08
14:56
Page 14
Pressed steel ball bearing units
Design
SNR pressed steel ball bearing units are
available as pillow block-, flanged- or take-up
units. The housings are provided with bores for
assembly. Pressed steel ball bearing units are
not relubricatable.
Delivery condition
Misalignment
SNR pressed steel housings are supplied preassembled. The bearing inserts are lubricated
for life. They are attached to the housings.
SNR pressed steel ball bearing units are selfaligning due to their spherically designed
bearing seat. The built-in inserts can be moved
in all directions. Shaft misalignment is
compensated up to 6 degrees.
Pressed steel bearing units
α=±5°
SNR Industry
14
4/12/08
14:56
Page 15
SNR Industry
15
Materials / Surfaces
Sheet steel
Zinc-coating
Material
Surfaces
SNR pressed steel ball bearing units are made
of cold rolled sheet steel.
SNR pressed steel ball bearing units are zincplated.
Load capacity
Maximum load capacity of the housing in radial direction:
Flanged unit:
Pillow block unit:
Cr x 0.25
Cr x 0.10
Maximum load capacity of the housing in axial direction:
Flanged unit:
Pillow block unit:
Cr x 0.10
Cr x 0.10
Cr = radial dynamic load rating of the bearing insert used.
4/12/08
14:57
Page 16
Bearing Inserts
Designs
The internal design of bearing inserts correspond to the standard deep groove ball bearings of the
6200 and 6300 series. However, they have expanded inner rings for easier fixing on shafts or
conical bores for assembly with adapter sleeves.
All bearing inserts are sealed on both sides and are available both with cylindrical as well as with
spherical outer rings.
UC200/UC300 series (spherical outer ring)
• relubricatable
• extended inner ring on both sides
• fixing to shaft using set screws
• optional design as floating bearing
• seals on both sides with additional slingers
• also available with triple seals
CUC200 series (cylindrical outer ring)
• slot in outer ring for fixing in housing by
retaining snap ring
• groove in outer ring with lubrication holes
• otherwise, design like UC200
US200 series (spherical outer ring)
• relubricatable
• extended inner ring on one side
• fixing to shaft using set screws
• optional design as floating bearing
• seals on both sides
CUS200 series (cylindrical outer ring)
• not relubricatable
• groove in the outer ring for fixing in housing using
retaining snap ring
• otherwise, design like US200
ES200 series (spherical outer ring)
• relubricatable
• extended inner ring on one side
• fixing to shaft using eccentric locking collar
CES200 series (cylindrical outer ring)
• groove in outer ring for fixing in housing by
retaining snap ring
• otherwise, design like ES200
SNR Industry
16
4/12/08
14:57
Page 17
SNR Industry
17
Designs
EX200/EX300 series (spherical outer ring)
• relubricatable
• extended inner ring on both sides
• fixing to shaft using eccentric locking collar
seals on both sides with additional slingers
CEX200 series (cylindrical outer ring)
• groove in outer ring with lubrication holes
• otherwise, design like EX200
UK200/UK300 series (spherical outer ring)
• relubricatable
• inner ring with tapered bore for mounting of
adapter sleeve
• fixing to shaft using adapter sleeve
• seals on both sides with additional slingers
6200SEE series (spherical outer ring)
• dimensions and tolerances like deep groove ball bearings
of 6200 series
• fixing to shaft using fit adjustment
Delivery conditions
SNR ball bearing inserts are supplied ready for use. The inserts are already lubricated for life with a suitable
bearing grease. Under normal operating conditions, it is not necessary to relubricate them.
The necessary components for fixing the inserts on the shaft are included in the scope of delivery.
SNR ball bearing inserts are either mounted into the respective housing or are supplied separately as
bearing insert.
4/12/08
15:22
Page 18
Bearing Inserts
Materials
Inner and outer rings as well as the balls of the SNR ball bearing inserts are made of hardened
100 Cr6 bearing steel.
Inserts are generally supplied with riveted two-piece steel plate cages.
The seals are made of nitrile rubber and zinc-plated sheet metal.
Fixing to the shaft
One advantage of the SNR ball bearing units are the minimum demands that this type of bearing arrangement
makes on the shaft. It must neither be hardened nor ground and the surface quality too has few requirements.
2
We recommend shaft materials having tensile strength of at least 500 N/mm . The maximal admissible speed
is depending not only on the bearing geometry but also on the tolerance of the shaft diameter, as can be seen
in the following diagram.
Series
Series
Series
Series
Series
Speed [min-1]
Series
Series
Series
Insert size
For most applications, threaded pins provide a sufficiently secure fixing of the inner ring to the shaft. For
eccentric locking collars, it is recommended to use shafts manufactured according to h6-h9 for the bearing
seats. If tapered adapter sleeves are used, the shaft tolerance h9 to h11 is sufficient. If severe operating
conditions are encountered, such as vibrations or shocks, a slight interference fit is preferred.
SNR Industry
18
4/12/08
15:22
Page 19
SNR Industry
19
Options for shaft fixing
Fixing
hexagon socket
set screw
Features
Application
• 2 set screws displaced
by 120° with hexagon
socket and knurled
cup point
• normal loads
• low to medium speeds
• easy to disassemble
Eccentric locking • Fixing using an
collar
eccentric locking collar
and hexagon socket set
screw
• normal loads
with consistent
direction of rotation
• not suitable for
reversing operation
• low to medium
speeds
Adapter sleeve
• Tapered adapter sleeve
with lock washer
and groove nut
• Concentric
shaft fixing
• higher speeds
• suitable for reversing
operation
• particularly smooth
running
Fit adjustment
• Fixing using
shaft fit adjustment
• medium to high
speeds
• normal to high
loads
• little structural space
Floating bearing
screw
• Stud bolt in shaft
slot, can be moved
in the axial direction
• low speeds and
loads
• large degree of linear
expansion
(e.g., due to
variable temperatures)
Exact specifications for the individual fixing options can be found on the following pages.
4/12/08
15:22
Page 20
Bearing inserts
Set screws for bearing inserts
Metric
Set
screw
M5
M6
M8
M10
M12
M14
M16
M18
M20
Bearing insert
x
x
x
x
x
x
x
x
x
0.8
1
1
1.25
1.25
1.5
1.5
1.5
1.5
UC
US
ES
EX
CUC
CUS
CES
CEX
201-206
207-209
210-212
213-218
305-306
307
308-309
310-314
315-316
317-319
320-324
326-328
201-203
204-207
208-210
211-212
201-206 201-206
207-210 207-210
211-212 211-215
216-218
Max. tightening
torque
[Nm]
305-307
308-312
313-314
315-317
318-320
3.5
5.5
11.5
22.0
33.0
42.0
64.0
75.0
120.0
Hexagon
socket
WA
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
Inch
Set
screw
Bearing insert
UC
CUC
10# - 32 UNF
1/4 - 28 UNF
5/16 -24 UNF
3/8 -24 UNF
7/16 -20 UNF
201-08
206-20
207-22
209-28
210-30
213-40
214-44
217-52
1/2 -20 UNF
218-56
5/8 -18 UNF
3/4 -16 UNF
SNR Industry
20
305-14
306-19
307-20
307-23
308-24
309-28
310-30
314-44
315-47
315-48
317-52
320-64
US
ES
EX
CUS
CES
CEX
201-08
203-11
204-12
206-20
207-22
211-35
212-36
212-39
201-08
205-16
206-18
210-31
211-32
212-39
201-08
205-16
206-18
210-31
211-32
215-48
217-52
218-56
Max. tightening
torque
[Nm]
305-14
307-23
308-24
312-39
313-40
314-44
315-48
317-52
318-56
320-64
Hexagon
socket
WA
3.2
3/32
3.7
1/8
8.0
5/32
16.8
3/16
27.1
7/32
33.9
1/4
54.5
5/16
65.2
3/8
4/12/08
15:23
Page 21
SNR Industry
21
Dimensions, floating
bearing screws
WA
Dimensions of the shaft slot.
Designation
floating bearing
screw
Thread
WA
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
3
3
3
3
4
4
5
5
5
6
6
6
6
8
8
8
8
10
Designation
Bearing insert
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
06
06
06
06
06
06
08
08
08
10
10
10
12
12
12
12
12
12
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
110
110
090
075
075
090
105
105
105
110
125
135
125
145
145
155
175
175
3.0
4.5
3.5
3.5
3.5
4.5
4.5
4.5
5.0
5.5
6.0
6.5
6.5
6.5
6.5
7.5
8.5
7.5
4
4
4
4
4
4
6
6
6
7
7
7
7
9
9
9
9
9
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
075
090
100
110
105
115
110
125
135
145
155
175
200
215
235
250
300
330
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M10x1.25
M10x1.25
M10x1.25
M12x1.25
M12x1.25
M12x1.25
M14x1.5
M16x1.5
M16x1.5
M18x1.5
M18x1.5
M20x1.5
Fitting dimensions
for floating bearing screws,
300 series
Fitting dimensions
for floating bearing screws,
200 series
Fitting dimensions
[mm]
Screw
h
w
06
06
06
06
08
08
10
10
10
12
12
12
14
16
16
18
18
20
Designation
Bearing insert
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
UC
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
Screw
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
SH
06
06
08
10
10
12
12
12
12
12
14
14
16
16
16
18
18
18
18
20
20
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Fitting dimensions
[mm]
h
w
090
110
115
125
135
145
155
155
175
175
200
200
215
235
235
250
250
300
300
330
330
4.5
4.5
5.0
5.0
5.5
5.5
6.0
5.5
6.5
6.0
7.5
6.5
7.5
9.0
8.0
8.0
7.5
11.5
9.0
10.0
8.5
4
4
6
7
7
9
9
9
9
9
10
10
12
12
12
13
13
13
13
15
15
4/12/08
15:23
Page 22
Tightening torques for groove nuts
with adapter sleeve fixing
Bearing insert
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
205
206
207
208
209
210
211
212
213
215
216
217
218
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
UK
305
306
307
308
309
310
311
312
313
315
316
317
318
319
320
322
324
326
328
Tightening
torque
[Nm]
20
30
40
50
60
70
95
125
150
350
400
450
550
650
800
1050
1350
1650
1900
Hook spanner
DIN 1810 A
size
38-45
45-50
52-55
58-62
65-70
65-70
68-75
80-90
85-92
98-105
98-105
110-115
120-130
120-130
120-130
135-145
155-165
155-165
180-195
The designation of the corresponding adapter sleeve is listed in the
dimension tables.
SNR Industry
22
4/12/08
15:23
Page 23
SNR Industry
23
Seals
Description
Applications
Seal with slinger
Two-piece sealing system consisting • Additional mechanical
of sheet metal washer with single lip protection of the seal from
nitrile rubber seal vulcanised on it
foreign matter
and an additional sheet metal
• Medium to high speeds
slinger
Single lip seal
Seal consisting of sheet metal
washer with sealing lip vulcanised
on it made of nitrile rubber
• Normal ambient
conditions
• Medium to high speeds
Triple lip seal
One-piece seal consisting of steel
plate washer with triple lip seal
vulcanised on it
• Surroundings with strong
contamination
• Low to medium speeds
High temperature seal
• Temperatures up to +200 °C
Two-piece contactless steel plate
seal
4/12/08
15:23
Page 24
Xoxoxo
SNR
Ball Bearing Units
Operating temperature
Standard ball bearing inserts are suitable for all applications in the temperature range
of –20 °C to +100 °C.
SNR high temperature inserts were specially designed for applications with operating temperatures
above the range mentioned previously. They have a steel plate cage like standard inserts. However,
they are equipped with a high temperature grease and can be used up to + 200 °C. The suffix for
these inserts is “T20” and is added to the bearing designation on orders , e.g., “UCP206T20”.
For applications below the normal temperature range (down to –40 °C), we supply bearing inserts
with the designation “T04”. They also have a steel plate cage but are filled with a low temperature
grease. On orders, the designation is also added to the end, e.g., “UCP206T04”.
For further specifications about the lubricants used, refer to the section “Lubrication and
maintenance” starting on page 34.
Bearing clearance
Standard ball bearing inserts are manufactured with an increased bearing clearance of group C3.
Inserts for high or low temperature applications have C4 bearing clearance.
The bearing clearance values can be found in the following tables:
Inserts with cylindrical
bore
Bore
nominal size
[mm]
above up to
10
18
24
30
40
50
65
80
100
120
SNR Industry
24
18
24
30
40
50
65
80
100
120
140
Inserts with tapered
bore
Radial bearing clearance
[µm]
normal
C3
C4
min. max. min. max. min. max.
3
5
5
6
6
8
10
12
15
18
18
20
20
20
23
28
30
36
41
48
11
13
13
15
18
23
25
30
36
41
25
28
28
33
36
43
51
58
66
81
18
20
23
28
30
38
46
53
61
71
33
36
41
46
51
61
71
84
97
114
Bore
nominal size
[mm]
above up to
24
30
40
50
65
80
100
120
30
40
50
65
80
100
120
140
Radial bearing clearance
[µm]
normal
C3
C4
min. max. min. max. min. max.
13
15
18
23
25
30
36
41
28
33
36
43
51
58
66
81
23
28
30
38
46
53
61
71
41
46
51
61
71
84
97
114
32 50
39 60
43 68
54 84
64 99
74 114
89 134
109 159
4/12/08
15:23
Page 25
SNR Industry
25
Axial load capacity of bearing inserts
The axial load capacity of the inserts depends largely on the type of fixing on the shaft. The inner
design of the raceways and balls is of little importance in most cases. A further factor is the shaft
tolerance used.
In order to attain the largest possible axial load capacity for the respective type of fixing, it is
necessary that the fixing element (e.g., threaded pin, adapter sleeve) is secured at the specified
tightening torque.
For running conditions with strong vibrations or shock loads it is recommended to set the inner ring
against a shaft shoulder and to secure with a groove nut and lock washer as necessary. In this case,
the axial load carrying capacity of the inserts can be fully utilised like with standard deep groove
ball bearings. This can amount to up to 0.5-times the radial static load rating C0r. Such an
application should be examined closely taking into consideration the respective load conditions.
Load carrying capacity and speed limits
Load carrying capacity and speed limits of the bearing inserts are specified in the dimension
tables starting on page 160. The effect of shaft tolerances on speed limits is shown in the
diagram on page 18.
4/12/08
15:25
Page 26
Life calculation
Bearing life calculation
The inner design of bearing inserts for SNR ball bearing units are identical to deep groove ball
bearings. They are manufactured out of the same material, have the same degree of precision, and
are subject to the same strict production controls.
The calculation of bearing life and load ratings are performed using the calculation methods in
accordance with ISO 281 and ISO 76.
Determining bearing sizes
Before calculating the life of bearing units, the loads occurring must be determined. The required
bearing size essentially depends on the load and the speed. If the load occurs mostly while the
bearing rotates, this is referred to as dynamic load. However, if the load acts mainly during stand
still, at very low speeds, or with slight rotating movements, this is referred to as static load.
It is unimportant how the externally applied forces have their effect on the insert. The specification
dynamic or static only refer to the operating condition of the bearing.
Dynamic equivalent load
If both radial and axial forces are applied to a bearing insert, these must be converted to an
equivalent load (P) necessary for the calculation, as follows:
P = X • Fr + Y • F a
P
Fr
Fa
X
Y
=
=
=
=
=
Fa
SNR Industry
26
[kN]
dynamic equivalent load [kN]
actual radial load [kN]
actual axial load [kN]
radial factor
axial factor
C0r
e
0.014
0.028
0.056
0.084
0.110
0.170
0.280
0.420
0.560
0.19
0.22
0.26
0.28
0.30
0.34
0.38
0.42
0.44
X
1
Fa
Fr
≤e
Y
0
X
Fa
Fr
0.56
>e
Y
2.30
1.99
1.71
1.55
1.45
1.31
1.15
1.04
1.00
e
= limiting value
C0r = radial static load rating
(see dimension tables for
ball bearing units)
4/12/08
15:25
Page 27
SNR Industry
27
Static equivalent load
For a simultaneously occurring radial and axial static load, an equivalent load (P0) must be
determined:
P0= X0 • Fr + Y0 • Fa
but: P0 = Fr,
[kN]
Fa
if
Fr
≤ 0.8
P0 = static equivalent load
X0 = static radial factor
Y0 = static axial factor
[kN]
For all bearing inserts, the following applies:
X0 = 0.6
Y0 = 0.5
Using the ratio ƒs it can be checked if sufficient static dimensioning for the insert has been
ensured:
ƒs =
C0r
P0
Some standard
ƒs = 0.7
ƒs = 1.0
ƒs = 2.0
values are:
minimal demands for running smoothness and rotating movement
occasional rotating bearing, normal demands for running smoothness
high demands for running smoothness
It should be noted that this ratio does not provide any assurance against a break or similar, but
instead, it is assurance against excessive local deformation in the rolling contact (ball/raceway).
Calculating bearing life
When calculating bearing life for bearing units, the following applies:
L10 =
( CrP )
3
[10 6 revolutions]
If the bearing life should be specified in hours, the following applies:
L10h =
( CrP )
n = speed
3
·
10 6
60n
[min-1]
[h]
4/12/08
15:25
Page 28
Life calculation
Example calculation
The bearing life of a UCP210 ball bearing unit under the following conditions:
Radial load:
Axial load:
Normal operating condition speed:
UCP210 ball bearing unit data:
Fr
Fa
n
Cr
C0r
=
=
=
=
=
2 kN
1.7 kN
1800 min-1
35.1 kN
23.2 kN
Dynamic equivalent bearing load:
P=X
with
Fr + Y • Fa
•
Fa
C0r
=
[kN]
Fa
1.7 kN
=
Fr
2 kN
1.7 kN
= 0.073 and
23.2 kN
= 0.85
From Table 1:
with Fa/C0r = 0.073, e is determined to be ≈ 0.28
with Fa/Fr = 0.85 > e = 0.28
→ X=0.56
Y=1.55
P = 0.56 • 2 kN + 1.55 •1.7 kN = 3.76 kN
L10h =
Cr
3
6
(P ) ( )
10
60n
•
[h]
it follows
L10h =
3
10
( ) ( 60x1800
)
35.1
3.76
6
•
= 7532 h
The theoretical bearing life of the bearing unit, under normal operating conditions, is 7532 hours.
SNR Industry
28
4/12/08
15:26
Page 29
SNR Industry
29
Protective caps
Designs
In order to obtain protection from rotating shafts, increased sealing action, or additional mechanical
protection of the bearing units in harsh ambient conditions, it is possible to equip many of the SNR
ball bearing units with protective caps made of stainless steel. These are available closed or open
with a double lip seal for diameter lines 201 to 213.
SCC – closed protective
cap for shaft ends
SCO – open protective cap with double
lip seal for through shafts
Materials
The protective caps are manufactured from stainless steel. The double lip seal is made of silicon
rubber.
Fixing on the housing
There is no need for special tools to assemble
the protective caps on the housing. The cap is
inserted in a groove in the housing, and is
sufficiently secured by the resulting press fit.
Caution: Housings with a corresponding
groove must be ordered with the
specific Suffix “N”, e.g.:
“UCP.206.N”
4/12/08
15:27
Page 30
Protective caps
Protective cap assembly
Protective cap assembly
Seals
The double lip seal of the SNR protective cap
is manufactured from silicon rubber, and is
suitable for operating temperatures up to a
maximum of +200 ºC.
SNR Industry
30
Protective cap disassembly
4/12/08
15:28
Page 31
SNR Industry
31
Units
Designs
SNR ball bearing units are supplied as a ready-to-fit assembly. If relubrication is necessary, the
included lubricating nipple must be mounted.
The spherical bearing seatings of the housings are manufactured in two different ISO tolerances.
Bore diameters of up to 180 mm are manufactured in the tolerance class J7, which performes a firm
seat for the bearing inserts.
Larger bore diameters are manufactured in the tolerance class H7. In this cases the insert is
secured by a locking pin in the outer ring.
Assembly
SNR pillow blocks and inserts with set screw fixing
1. Release set screws and slide
bearing unit onto the shaft.
2. Screw down the housing on a flat
surface. Mount the housing on the
other end of the shaft in the same
manner.
3. Screw down the set screws at the
recommended tightening torque.
SNR pillow blocks and inserts with eccentric locking collar
1. Slide the unit onto the shaft. Do
not tighten the eccentric locking
collar.
2. Tighten the screws slightly. Mount
the unit on the other end of the shaft
in the same manner. Securely tighten
the screws.
3. Preferably tighten the eccentric
locking collar by hand in the direction
of the shaft rotation.
4/12/08
15:30
Page 32
Assembly
4. Tighten the eccentric locking collar
with mandrel and hammer.
5. Tighten the set screws.
SNR pillow blocks and inserts with adapter sleeve fixing
SNR Industry
32
1. Slide the adapter sleeve onto the
shaft.
2. Slide the unit onto the shaft.
4. Mount the lock washer and groove
nut and then tighten at the
recommended tightening torque.
5. Secure the adapter sleeve (bend
the tab of the lock washer into a slot
in the groove nut).
3. Align the unit on the shaft, then
screw on the housing securely.
4/12/08
15:30
Page 33
SNR Industry
33
Additional information about assembly
In order to prevent possible damage to the
bearing insert due to improper assembly, the
housing must first be screwed down onto its
respective base or onto the frame before the
inner rings of the inserts are tightened into their
final position on the shaft. Otherwise,
undesirable axial distortion could result and
thus premature failure of the bearing.
The ends of the shaft should be provided with a
chamfer for easier assembly.
It must be ensured that the set screws of the
bearing inserts are screwed out far enough so
that they do not project in the inner ring bore.
Otherwise, assembly can be difficult or the
shaft could even be damaged. Normally the
bearing inner rings are slid onto the shaft with a
tight loose fit. If for individual cases an interference fit proves to be essential, the inner rings
should be fit using a suitable piece of pipe,
preferably made of brass or plastic.
When assembly is finished, the shaft is initially
turned by hand in order to ensure rotation
without problems.
In operation, cast iron housings should be
stressed by pressure force and not by tension,
if possible. Take-up units must be positioned in
that way, that the straining screw presses
against the housing during adjustment.
Grey cast iron housings are not suitable for
highly alternating or axial dynamic loads. In
such cases, housings made of cast steel or
nodular graphite iron should be used.
Mountings with large bearing spread and
bearings which are exposed to additional axial
loads because of highly variable temperatures,
require special measures, such as mounting a
floating bearing screw.
We also supply the respective assembly tools
for all bearing inserts, as well as for standard
bearings.
Direct hammer impacts on the inserts or the
housing must be avoided because they can
damage the bearing.
Securing the housing
If exact positioning of the bearing unit is
required, some of the housing types can be
secured using available centring, or straight or
tapered pins.
Housing types with possible positions of the pin
bores can be found in the tables starting on
page 190.
4/12/08
15:30
Page 34
Lubrication and maintenance
SNR ball bearing units are filled with the
required amount of grease at the factory. Thus
additional lubrication during assembly is not
necessary.
Relubrication is not necessary for normal
operating conditions.
Under severe conditions, such as continuous
operation at high speeds, high temperatures
(above +70 °C operating temperature), heavy
loads, or very humid or dirty surroundings,
regular relubrication is necessary.
Relubrication is dependent on the insert size.
Relubrication should be performed during
operation (rotating insert under operating
temperature). Press the suitable grease into the
unit until a fresh collar of grease is formed on
the seals.
Caution: The old grease must be allowed to
emerge without hindrance.
Relubrication system
Grey cast iron housings are equipped with a
lubrication groove within the spherical bore.
The inserts have 4 lubrication holes in the outer
ring which are arranged offset.
SNR Industry
34
Because of the arrangement of the lubrication
holes, SNR inserts can be mounted in nearly all
housings with lubrication groove and then be
relubricated.
4/12/08
15:30
Page 35
SNR Industry
35
Lubricating nipple
The lubricating nipple used is made of steel and is
zinc plated.
The following sizes of the lubricating nipple are
used:
M6x1, M8x1, M10x1 and R1/8“
Specifications about suitable lubricating nipples for
individual housings can be found in the dimension
tables.
Delivery condition: Lubricating nipples are
supplied together with the bearing units. They are
not mounted. The lubrication hole in the housings
is closed with a plastic plug.
Grease
SNR ball bearing inserts are lubricated for life at the factory. If relubrication is necessary because
of severe operating conditions, grease having the same base and consistency should be used.
The greases for SNR ball bearing units have the following technical characteristics:
Range of
application for
grease
Grease base
Viscosity
Speed
Temperature range Consistency
DIN 51 818 characteristic at 40°C
[°C]
[mm2/s]
NLGI class
(n • dm)
–1
[min • mm]
Standard
Lithium soap
–20 to +120
II
500 000
100
High
temperatures
(e.g., “T20”)
Perfluorpolyether
oil and PTFE
–40 to +260
II
300 000
400
Lithium soap
–60 to +120
III
–
25
Low
temperatures
(e.g., “T04”)
TC09GBc:Maßtabellen
INDUSTRY
4/12/08
15:44
Page 1
Pillow block unit
General
Housing
PE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPE200
d
Main dimensions [mm]
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
130
125
125
130
130
125
125
130
130
125
125
130
130
130
130
130
130
130
130
130
130
158
158
158
158
158
163
163
163
163
163
179
179
179
179
179
192
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
33,3
33,3
33,3
36,5
36,5
36,5
36,5
36,5
42,9
42,9
42,9
42,9
42,9
47,6
47,6
47,6
47,6
47,6
49,2
49,2
49,2
49,2
49,2
54,0
19
18
18
19
19
18
18
19
19
18
18
19
19
19
19
19
21
21
21
21
21
25
25
25
25
25
27
27
27
27
27
30
30
30
30
30
32
32
30
30
32
32
30
30
32
32
30
30
32
32
32
32
32
36
36
36
36
36
40
40
40
40
40
45
45
45
45
45
48
48
48
48
48
48
97
95
95
97
97
95
95
97
97
95
95
97
97
97
97
97
103
103
103
103
103
118
118
118
118
118
126
126
126
126
126
138
138
138
138
138
150
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
22
22
22
22
22
21
21
21
21
21
26
26
26
26
26
29
40,0
38,0
38,0
40,0
40,0
38,0
38,0
40,0
40,0
38,0
38,0
40,0
40,0
40,0
40,0
40,0
39,0
39,0
39,0
39,0
39,0
47,0
47,0
47,0
47,0
47,0
49,0
49,0
49,0
49,0
49,0
53,0
53,0
53,0
53,0
53,0
54,5
14,5
10,0
10,0
14,5
14,5
10,0
10,0
14,5
14,5
10,0
10,0
14,5
14,5
14,5
14,5
14,5
14,5
14,5
14,5
14,5
14,5
17,0
17,0
17,0
17,0
17,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
21,5
64
57
57
64
64
57
57
64
64
57
57
64
64
64
64
64
70
70
70
70
70
82
82
82
82
82
93
93
93
93
93
99
99
99
99
99
107
18,5
20,5
22,5
24,5
26,0
35
38
43
46
50
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
36
UCPE201
USPE201
ESPE201
EXPE201
UCPE202
USPE202
ESPE202
EXPE202
UCPE203
USPE203
ESPE203
EXPE203
UCPE204
USPE204
ESPE204
EXPE204
UKPE205H
UCPE205
USPE205
ESPE205
EXPE205
UKPE206H
UCPE206
USPE206
ESPE206
EXPE206
UKPE207H
UCPE207
USPE207
ESPE207
EXPE207
UKPE208H
UCPE208
USPE208
ESPE208
EXPE208
UKPE209H
4/12/08
15:44
Page 2
SNR Industry
37
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
44,6
40,6
***
***
44,6
40,6
***
***
44,6
40,6
***
***
44,6
44,6
***
***
47,8
47,8
47,8
***
***
52,8
52,8
52,8
***
***
57,4
57,4
57,4
***
***
66,8
66,8
66,8
***
***
67,8
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
PE204
PE203
PE203
PE204
PE204
PE203
PE203
PE204
PE204
PE203
PE203
PE204
PE204
PE204
PE204
PE204
PE205
PE205
PE205
PE205
PE205
PE206
PE206
PE206
PE206
PE206
PE207
PE207
PE207
PE207
PE207
PE208
PE208
PE208
PE208
PE208
PE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,5
0,4
0,5
0,6
0,5
0,4
0,5
0,6
0,5
0,4
0,5
0,6
0,5
0,5
0,5
0,6
0,8
0,7
0,7
0,7
0,8
1,2
1,1
1,1
1,1
1,2
1,6
1,5
1,5
1,6
1,7
1,9
1,8
1,8
1,8
2,0
2,3
* = Equipped with two open protective caps for passing shafts: Suffix CO see example on page 6
** = Equipped with one open and one closed protective cap for shaft ends: Suffix CC see example on page 6
*** = Protective caps for bearing inserts with eccentric locking collar available on request.
aft
dia
me
ter
Sh
t
*
UCPE200CO(CC)
We
igh
UKPE200H
Op
tiveen pr
c o
Clo apstecs
tive ed
ca prot
Dyn ps eca
rati mic lo **
ng
ad
ins
Be
arin
g
Ho
us
ing
ert
EXPE200
Sta
t
rat ic loa
ing d
ESPE200
USPE200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:44
Page 3
Pillow block unit
General
Housing
PE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPE200
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
192
192
192
192
200
200
200
200
200
222
222
222
222
222
240
240
240
240
240
260
260
260
265
260
260
290
265
265
290
290
330
330
330
54,0
54,0
54,0
54,0
57,2
57,2
57,2
57,2
57,2
63,5
63,5
63,5
63,5
63,5
69,9
69,9
69,9
69,9
69,9
79,4
79,4
79,4
82,5
79,4
79,4
89,0
82,5
82,5
89,0
89,0
101,6
101,6
101,6
32
32
32
32
34
34
34
34
34
35
35
35
35
35
42
42
42
42
42
44
44
44
48
44
44
55
48
48
55
55
55
55
55
48
48
48
48
54
54
54
54
54
60
60
60
60
60
60
60
60
60
60
65
65
65
66
65
65
78
66
66
78
78
85
85
85
150
150
150
150
158
158
158
158
158
176
176
176
176
176
190
190
190
190
190
203
203
203
210
203
203
232
210
210
232
232
268
268
268
14
14
14
14
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
26
22
22
26
26
27
27
27
29
29
29
29
23
23
23
23
23
30
30
30
30
30
28
28
28
28
28
28
28
28
30
28
28
34
30
30
34
34
35
35
35
54,5
54,5
54,5
54,5
61,0
61,0
61,0
61,0
61,0
68,0
68,0
68,0
68,0
68,0
71,0
71,0
71,0
71,0
71,0
77,0
77,0
77,0
78,0
77,0
77,0
90,0
78,0
78,0
90,0
90,0
99,0
99,0
99,0
21,5
21,5
21,5
21,5
21,5
21,5
21,5
21,5
21,5
22,5
22,5
22,5
22,5
22,5
25,0
25,0
25,0
25,0
25,0
27,5
27,5
27,5
27,5
27,5
27,5
30,0
27,5
27,5
30,0
30,0
35,0
35,0
35,0
107,0
107,0
107,0
107,0
115,0
115,0
115,0
115,0
115,0
124,5
124,5
124,5
124,5
124,5
140,0
140,0
140,0
140,0
140,0
156,0
156,0
156,0
164,0
156,0
156,0
175,0
164,0
164,0
175,0
175,0
200,0
200,0
200,0
27,5
29,0
31,0
32,0
35,5
39,0
42,0
-
55,0
59,0
62,0
65,0
73,0
78,0
86,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
74,6
85,7
77,8
92,1
82,6
95,2
96,0
72,5
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
25,4
34,1
30,2
34,1
33,3
37,3
33,3
37,3
39,7
24,5
[mm]
45
50
55
60
65
70
75
80
90
SNR Industry
38
UCPE209
USPE209
ESPE209
EXPE209
UKPE210H
UCPE210
USPE210
ESPE210
EXPE210
UKPE211H
UCPE211
USPE211
ESPE211
EXPE211
UKPE212H
UCPE212
USPE212
ESPE212
EXPE212
UKPE213H
UCPE213
EXPE213
UKPE215H
UCPE214
EXPE214
UKPE216H
UCPE215
EXPE215
UCPE216
EXPE216
UKPE218H
UCPE218
EXPE218
4/12/08
15:44
Page 4
SNR Industry
39
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
98,0
96,8
105,0
102,0
110,0
120,0
120,0
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
67,8
67,8
***
***
74,6
74,6
74,6
***
***
75,2
75,2
75,2
***
***
87,8
87,8
87,8
***
***
88,8
88,8
***
-
PE209
PE209
PE209
PE209
PE210
PE210
PE210
PE210
PE210
PE211
PE211
PE211
PE211
PE211
PE212
PE212
PE212
PE212
PE212
PE213
PE213
PE213
PE215
PE214
PE214
PE216
PE215
PE215
PE216
PE216
PE218
PE218
PE218
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
UK215 + H2315
UC214
EX214
UK216 + H2316
UC215
EX215
UC216
EX216
UK218 + H2318
UC218
EX218
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
66,00
62,00
62,00
72,50
66,00
66,00
72,50
72,50
96,00
96,00
96,00
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
49,50
45,00
45,00
54,20
49,50
49,50
54,20
54,20
71,50
71,50
71,50
2,2
2,1
2,2
2,4
2,9
2,7
2,7
2,7
2,9
3,5
3,4
3,4
3,2
3,7
4,8
4,8
4,6
4,5
5,1
7,3
6,1
6,6
6,8
6,1
6,6
9,4
6,9
7,5
9,0
9,3
13,6
13,3
13,8
aft
dia
me
ter
t
*
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
UCPE200CO(CC)
We
igh
ins
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
82,0
86,5
91,5
98,0
111,0
-
D2
Be
arin
g
ing
Ho
us
D1
UKPE200H
Sh
EXPE200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESPE200
ert
USPE200
d
[mm]
45
50
55
60
65
70
75
80
90
INDUSTRY
4/12/08
15:44
Page 5
Pillow block unit
General
Housing
PLE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPLE200
d
L
H
A1
A
J
N
N1
H1
H2
s1
B
B1
s
D1
126,5
119,0
119,0
126,5
126,5
119,0
119,0
126,5
126,5
119,0
119,0
126,5
126,5
126,5
126,5
126,5
139,0
139,0
139,0
139,0
139,0
161,5
161,5
161,5
161,5
161,5
166,0
166,0
166,0
166,0
166,0
180,5
31,8
27,0
27,0
31,8
31,8
27,0
27,0
31,8
31,8
27,0
27,0
31,8
31,8
31,8
31,8
31,8
33,3
33,3
33,3
33,3
33,3
39,7
39,7
39,7
39,7
39,7
46,2
46,2
46,2
46,2
46,2
49,2
22,5
20,5
20,5
22,5
22,5
20,5
20,5
22,5
22,5
20,5
20,5
22,5
22,5
22,5
22,5
22,5
24,5
24,5
24,5
24,5
24,5
27,5
27,5
27,5
27,5
27,5
30,5
30,5
30,5
30,5
30,5
34,5
32,0
30,0
30,0
32,0
32,0
30,0
30,0
32,0
32,0
30,0
30,0
32,0
32,0
32,0
32,0
32,0
36,5
36,5
36,5
36,5
36,5
41,5
41,5
41,5
41,5
41,5
44,5
44,5
44,5
44,5
44,5
51,0
94,5
88,5
88,5
94,5
94,5
88,5
88,5
94,5
94,5
88,5
88,5
94,5
94,5
94,5
94,5
94,5
104,2
104,2
104,2
104,2
104,2
119,0
119,0
119,0
119,0
119,0
129,0
129,0
129,0
129,0
129,0
137,5
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
14
17,0
14,0
14,0
17,0
17,0
14,0
14,0
17,0
17,0
14,0
14,0
17,0
17,0
17,0
17,0
17,0
17,0
17,0
17,0
17,0
17,0
24,5
24,5
24,5
24,5
24,5
21,5
21,5
21,5
21,5
21,5
24,5
12,5
11,0
11,0
12,5
12,5
11,0
11,0
12,5
12,5
11,0
11,0
12,5
12,5
12,5
12,5
12,5
12,8
12,8
12,8
12,8
12,8
14,5
14,5
14,5
14,5
14,5
16,0
16,0
16,0
16,0
16,0
18,5
63,7
54,0
54,0
63,7
63,7
54,0
54,0
63,7
63,7
54,0
54,0
63,7
63,7
63,7
63,7
63,7
67,8
67,8
67,8
67,8
67,8
79,5
79,5
79,5
79,5
79,5
91,5
91,5
91,5
91,5
91,5
98,5
18,5
20,5
22,5
24,5
35,0
38,0
43,0
46,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
-
[mm]
12
15
17
20
25
30
35
SNR Industry
40
UCPLE201
USPLE201
ESPLE201
EXPLE201
UCPLE202
USPLE202
ESPLE202
EXPLE202
UCPLE203
USPLE203
ESPLE203
EXPLE203
UCPLE204
USPLE204
ESPLE204
EXPLE204
UKPLE205H
UCPLE205
USPLE205
ESPLE205
EXPLE205
UKPLE206H
UCPLE206
USPLE206
ESPLE206
EXPLE206
UKPLE207H
UCPLE207
USPLE207
ESPLE207
EXPLE207
UKPLE208H
4/12/08
15:44
Page 6
SNR Industry
41
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
44,6
40,6
***
***
44,6
40,6
***
***
44,6
40,6
***
***
44,6
42,6
***
***
47,8
47,8
47,8
***
***
52,8
52,8
52,8
***
***
57,4
57,4
57,4
***
***
66,8
PLE204
PLE203
PLE203
PLE204
PLE204
PLE203
PLE203
PLE204
PLE204
PLE203
PLE203
PLE204
PLE204
PLE204
PLE204
PLE204
PLE205
PLE205
PLE205
PLE205
PLE205
PLE206
PLE206
PLE206
PLE206
PLE206
PLE207
PLE207
PLE207
PLE207
PLE207
PLE208
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
0,5
0,4
0,5
0,6
0,5
0,4
0,5
0,6
0,5
0,4
0,5
0,6
0,5
0,5
0,5
0,6
0,8
0,7
0,7
0,7
0,8
1,2
1,1
1,1
1,1
1,2
1,6
1,5
1,5
1,6
1,7
1,9
aft
dia
me
ter
t
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
UCPLE200CO(CC)
We
igh
ins
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
G
Be
arin
g
ing
Ho
us
D2
UKPLE200H
Sh
EXPLE200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESPLE200
ert
USPLE200
d
[mm]
12
15
17
20
25
30
35
INDUSTRY
4/12/08
15:44
Page 7
Pillow block unit
General
Housing
PLE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPLE200
d
L
H
A1
A
J
N
N1
H1
H2
s1
B
B1
s
D1
180,5
180,5
180,5
180,5
197,5
197,5
197,5
197,5
197,5
214,0
214,0
214,0
214,0
214,0
219,5
219,5
219,5
219,5
219,5
245,0
245,0
245,0
245,0
245,0
49,2
49,2
49,2
49,2
52,4
52,4
52,4
52,4
52,4
55,6
55,6
55,6
55,6
55,6
61,3
61,3
61,3
61,3
61,3
68,3
68,3
68,3
68,3
68,3
34,5
34,5
34,5
34,5
35,0
35,0
35,0
35,0
35,0
36,0
36,0
36,0
36,0
36,0
39,5
39,5
39,5
39,5
39,5
50,8
50,8
50,8
50,8
50,8
51,0
51,0
51,0
51,0
54,0
54,0
54,0
54,0
54,0
55,0
55,0
55,0
55,0
55,0
60,0
60,0
60,0
60,0
60,0
79,4
79,4
79,4
79,4
79,4
137,5
137,5
137,5
137,5
151,5
151,5
151,5
151,5
151,5
164,0
164,0
164,0
164,0
164,0
170,5
170,5
170,5
170,5
170,5
193,7
193,7
193,7
193,7
193,7
14
14
14
14
14
14
14
14
14
14
14
14
14
14
18
18
18
18
18
18
18
18
18
18
24,5
24,5
24,5
24,5
24,0
24,0
24,0
24,0
24,0
27,0
27,0
27,0
27,0
27,0
26,0
26,0
26,0
26,0
26,0
29,1
29,1
29,1
29,1
29,1
18,5
18,5
18,5
18,5
18,4
18,4
18,4
18,4
18,4
19,3
19,3
19,3
19,3
19,3
23,2
23,2
23,2
23,2
23,2
28,6
28,6
28,6
28,6
28,6
98,5
98,5
98,5
98,5
106,4
106,4
106,4
106,4
106,4
114,0
114,0
114,0
114,0
114,0
128,0
128,0
128,0
128,0
128,0
138,1
138,1
138,1
138,1
138,1
26,0
27,5
29,0
31,0
-
50,0
55,0
59,0
62,0
-
49,2
34,0
43,7
56,3
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
19,0
9,0
11,0
21,4
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
53,0
53,0
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
-
[mm]
40
45
50
55
60
SNR Industry
42
UCPLE208
USPLE208
ESPLE208
EXPLE208
UKPLE209H
UCPLE209
USPLE209
ESPLE209
EXPLE209
UKPLE210H
UCPLE210
USPLE210
ESPLE210
EXPLE210
UKPLE211H
UCPLE211
USPLE211
ESPLE211
EXPLE211
UKPLE212H
UCPLE212
USPLE212
ESPLE212
EXPLE212
4/12/08
15:44
Page 8
SNR Industry
43
60,3
60,3
65,0
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
66,8
66,8
***
***
67,8
67,8
67,8
***
***
74,6
74,6
74,6
***
***
75,2
75,2
75,2
***
***
87,8
87,8
87,8
***
***
PLE208
PLE208
PLE208
PLE208
PLE209
PLE209
PLE209
PLE209
PLE209
PLE210
PLE210
PLE210
PLE210
PLE210
PLE211
PLE211
PLE211
PLE211
PLE211
PLE212
PLE212
PLE212
PLE212
PLE212
UC208
US208
ES208
EX208
UK209 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
Cr
C0r
[kN]
[kN]
[kg]
29,60
29,60
29,60
29,60
31,85
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
18,20
18,20
18,20
18,20
20,80
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
1,8
1,8
1,8
2,0
2,3
2,2
2,1
2,2
2,4
2,9
2,7
2,7
2,7
2,9
3,5
3,4
3,4
3,2
3,7
4,8
4,8
4,6
4,5
5,1
Sh
t
*
Dz
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
UCPLE200CO(CC)
We
igh
ins
Be
arin
g
ing
Ho
us
D2
UKPLE200H
aft
dia
me
ter
EXPLE200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESPLE200
ert
USPLE200
d
[mm]
40
45
50
55
60
INDUSTRY
4/12/08
15:44
Page 9
Pillow block unit
General
Housing
P200 relubricatable
P300 relubricatable
Sh
aft
dia
me
ter
Un
it
UCP200
UCP300
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
140
175
140
140
140
140
165
175
175
180
165
165
165
165
167
180
180
210
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
33,3
33,3
33,3
36,5
45,0
36,5
36,5
36,5
36,5
42,9
45,0
45,0
50,0
42,9
42,9
42,9
42,9
47,6
50,0
50,0
56,0
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
26
32
26
26
26
26
30
32
32
36
30
30
30
30
31
36
36
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
45
38
38
38
38
48
45
45
50
48
48
48
48
48
50
50
56
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
105
132
105
105
105
105
121
132
132
140
121
121
121
121
127
140
140
160
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
17
13
13
13
13
17
17
17
17
17
17
17
17
17
17
17
17
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
20
19
19
19
19
21
20
20
20
21
21
21
21
21
20
20
25
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
54
42
42
42
42
54
54
54
54
54
54
54
54
54
54
54
60
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
15
16
16
16
16
18
15
15
18
18
18
18
18
19
18
18
20
65
62
62
65
65
62
62
65
65
62
62
65
65
65
65
65
70
85
70
70
70
70
83
85
85
95
83
83
83
83
94
95
95
106
18,5
21,5
20,5
23,0
22,5
25,5
35,0
35,0
38,0
38,0
43,0
43,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,0
46,8
38,1
30,0
35,7
48,3
43,0
50,0
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,0
16,7
15,9
8,0
9,0
18,2
17,0
17,5
-
[mm]
12
15
17
20
25
30
SNR Industry
44
UCP201
USP201
ESP201
EXP201
UCP202
USP202
ESP202
EXP202
UCP203
USP203
ESP203
EXP203
UCP204
USP204
ESP204
EXP204
UKP205H
UKP305H
UCP205
USP205
ESP205
EXP205
UKP206H
UCP305
EXP305
UKP306H
UCP206
USP206
ESP206
EXP206
UKP207H
UCP306
EXP306
UKP307H
4/12/08
15:44
Page 10
SNR Industry
45
EXP200
EXP300
UKP200H
UKP300H
D2
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
35,4
40,3
40,3
44,6
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,0
38,1
38,1
45,0
42,8
45,0
44,5
44,5
52,0
50,0
52,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
45,0
45,0
***
***
45,0
45,0
***
***
45,0
45,0
***
***
45,0
45,0
***
***
48,0
48,0
48,0
***
***
53,0
53,0
53,0
***
***
60,0
-
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
-
P204
P203
P203
P204
P204
P203
P203
P204
P204
P203
P203
P204
P204
P204
P204
P204
P205
P305
P205
P205
P205
P205
P206
P305
P305
P306
P206
P206
P206
P206
P207
P306
P306
P307
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UK305 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC305
EX305
UK306 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC306
EX306
UK307 + H2307
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
C0r
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
22,36
14,00
14,00
14,00
14,00
19,50
22,36
22,36
27,00
19,50
19,50
19,50
19,50
25,70
27,00
27,00
33,50
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
11,50
7,88
7,88
7,88
7,88
11,20
11,50
11,50
15,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
19,20
0,7
0,7
0,7
0,8
0,7
0,6
0,7
0,8
0,7
0,6
0,7
0,8
0,7
0,7
0,7
0,8
0,8
1,6
0,8
0,8
0,8
0,9
1,4
1,4
1,5
2,0
1,4
1,3
1,4
1,5
1,8
1,9
2,1
2,8
Sh
t
Cr
[kN]
aft
dia
me
ter
*
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UCP200CO(CC)
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESP200
ert
USP200
d
[mm]
12
15
17
20
25
30
INDUSTRY
4/12/08
15:44
Page 11
Pillow block unit
General
Housing
P200 relubricatable
P300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCP200
UCP300
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
167
167
167
167
184
210
210
220
184
184
184
184
190
220
220
245
190
190
190
190
206
245
245
275
206
206
206
206
219
275
275
310
47,6
47,6
47,6
47,6
49,2
56,0
56,0
60,0
49,2
49,2
49,2
49,2
54,0
60,0
60,0
67,0
54,0
54,0
54,0
54,0
57,2
67,0
67,0
75,0
57,2
57,2
57,2
57,2
63,5
75,0
75,0
80,0
31
31
31
31
34
38
38
42
34
34
34
34
37
42
42
45
37
37
37
37
39
45
45
48
39
39
39
39
40
48
48
51
48
48
48
48
54
56
56
60
54
54
54
54
54
60
60
67
54
54
54
54
60
67
67
75
60
60
60
60
60
75
75
80
127
127
127
127
137
160
160
170
137
137
137
137
146
170
170
190
146
146
146
146
159
190
190
212
159
159
159
159
171
212
212
236
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
20
17
17
17
17
20
20
20
20
20
20
20
20
20
20
20
20
21
21
21
21
23
25
25
27
23
23
23
23
23
27
27
30
23
23
23
23
25
30
30
35
25
25
25
25
25
35
35
38
54
54
54
54
52
60
60
60
52
52
52
52
60
60
60
65
60
60
60
60
65
65
65
75
65
65
65
65
70
75
75
85
19
19
19
19
19
20
20
22
19
19
19
19
20
22
22
24
20
20
20
20
22
24
24
27
22
22
22
22
22
27
27
30
94
94
94
94
100
106
106
116
100
100
100
100
108
116
116
129
108
108
108
108
114
129
129
143
114
114
114
114
126
143
143
154
24,5
27,5
26,0
30,0
27,5
32,0
29,0
34,0
46,0
46,0
50,0
50,0
55,0
55,0
59,0
59,0
42,9
32,0
38,9
51,1
48,0
51,6
49,2
34,0
43,7
56,3
52,0
57,1
49,2
41,2
43,7
56,3
57,0
58,7
51,6
43,5
43,7
62,7
61,0
66,6
-
17,5
8,5
9,5
18,8
19,0
18,3
19,0
9,0
11,0
21,4
19,0
19,8
19,0
10,2
11,0
21,4
22,0
19,8
19,0
10,9
11,0
24,6
22,0
24,6
-
[mm]
35
40
45
50
SNR Industry
46
UCP207
USP207
ESP207
EXP207
UKP208H
UCP307
EXP307
UKP308H
UCP208
USP208
ESP208
EXP208
UKP209H
UCP308
EXP308
UKP309H
UCP209
USP209
ESP209
EXP209
UKP210H
UCP309
EXP309
UKP310H
UCP210
USP210
ESP210
EXP210
UKP211H
UCP310
EXP310
UKP311H
4/12/08
15:44
Page 12
SNR Industry
47
48,0
48,0
48,9
53,0
53,0
56,5
57,2
57,2
61,8
61,8
61,8
68,7
-
D2
55,6
55,6
58,0
55,0
58,0
60,3
60,3
65,0
63,5
65,0
63,5
63,5
70,0
70,0
70,0
69,9
69,9
75,0
76,2
75,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
60,0
60,0
***
***
69,0
69,0
69,0
***
***
69,0
69,0
69,0
***
***
76,0
76,0
76,0
***
***
77,0
-
Dz
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
-
P207
P207
P207
P207
P208
P307
P307
P308
P208
P208
P208
P208
P209
P308
P308
P309
P209
P209
P209
P209
P210
P309
P309
P310
P210
P210
P210
P210
P211
P310
P310
P311
UC207
US207
ES207
EX207
UK208 + H2308
UC307
EX307
UK308 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UC308
EX308
UK309 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC309
EX309
UK310 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC310
EX310
UK311 + H2311
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
Cr
C0r
[kN]
[kN]
[kg]
25,70
25,70
25,70
25,70
29,60
33,50
33,50
40,56
29,60
29,60
29,60
29,60
31,85
40,56
40,56
53,00
31,85
31,85
31,85
31,85
35,10
53,00
53,00
62,00
35,10
35,10
35,10
35,10
43,55
62,00
62,00
71,50
15,20
15,20
15,20
15,20
18,20
19,20
19,20
24,00
18,20
18,20
18,20
18,20
20,80
24,00
24,00
31,80
20,80
20,80
20,80
20,80
23,20
31,80
31,80
37,80
23,20
23,20
23,20
23,20
29,20
37,80
37,80
44,80
1,8
1,7
1,8
1,9
2,2
2,6
2,7
3,4
2,1
2,1
2,1
2,3
2,5
3,3
3,5
4,8
2,4
2,4
2,4
2,6
3,1
4,6
4,7
6,2
3,0
2,9
3,0
3,2
3,7
6,1
6,3
7,9
aft
dia
me
ter
t
*
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UCP200CO(CC)
Sh
UKP200H
UKP300H
ert
EXP200
EXP300
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESP200
USP200
d
[mm]
35
40
45
50
INDUSTRY
4/12/08
15:45
Page 13
Pillow block unit
General
Housing
P200 relubricatable
P300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCP200
UCP300
d
L
H
A1
A
219
219
219
219
241
310
310
330
241
241
241
241
265
330
330
340
265
265
275
340
340
380
266
266
292
360
360
400
275
275
310
380
380
420
63,5
63,5
63,5
63,5
69,8
80,0
80,0
85,0
69,8
69,8
69,8
69,8
76,2
85,0
85,0
90,0
76,2
76,2
82,6
90,0
90,0
100,0
79,4
79,4
88,9
95,0
95,0
106,0
82,6
82,6
95,2
100,0
100,0
112,0
40
40
40
40
44
51
51
54
44
44
44
44
46
54
54
57
46
46
48
57
57
63
48
48
51
60
60
66
48
48
53
63
63
69
60
60
60
60
70
80
80
85
70
70
70
70
70
85
85
90
70
70
74
90
90
100
72
72
78
90
90
110
74
74
83
100
100
110
J
N
N1
L1
H1
H2
s1
171
171
171
171
184
236
236
250
184
184
184
184
203
250
250
260
203
203
217
260
260
290
210
210
232
280
280
300
217
217
247
290
290
320
20
20
20
20
20
20
20
25
20
20
20
20
25
25
25
25
25
25
25
25
25
27
25
25
25
27
27
27
25
25
25
27
27
33
25
25
25
25
25
38
38
38
25
25
25
25
29
38
38
38
29
29
31
38
38
40
31
31
31
40
40
40
31
31
31
40
40
45
70
70
70
70
70
85
85
95
70
70
70
70
77
95
95
105
77
77
85
105
105
110
83
83
91
105
105
110
85
85
96
110
110
120
22
22
22
22
25
30
30
32
25
25
25
25
27
32
32
33
27
27
28
33
33
35
27
27
30
35
35
40
28
28
32
35
35
40
126
126
126
126
138
154
154
165
138
138
138
138
150
165
165
176
150
150
163
176
176
198
156
156
175
187
187
210
163
163
187
198
198
220
31,0
36,5
32,0
38,5
35,5
42,5
39,0
44,5
40,0
48,0
B
B1
s
[mm]
55
60
65
70
75
SNR Industry
48
UCP211
USP211
ESP211
EXP211
UKP212H
UCP311
EXP311
UKP312H
UCP212
USP212
ESP212
EXP212
UKP213H
UCP312
EXP312
UKP313H
UCP213
EXP213
UKP215H
UCP313
EXP313
UKP315H
UCP214
EXP214
UKP216H
UCP314
EXP314
UKP316H
UCP215
EXP215
UKP217H
UCP315
EXP315
UKP317H
55,6
45,3
48,4
71,3
62,0
66,0
73,0
62,0
65,1
53,7
49,3
77,7
65,0
71,0
79,4
65,0
65,1
85,7
73,0
75,0
85,7
73,0
74,6
85,7
78,0
78,0
92,1
78,0
77,8
92,1
82,0
82,0
- 100,0
82,0
-
22,2
11,8
12,0
27,7
25,0
27,8
25,4
14,9
12,0
30,9
26,0
31,0
25,4
34,1
30,0
32,5
30,2
34,1
33,0
34,2
33,3
37,3
32,0
37,3
-
4/12/08
15:45
Page 14
SNR Industry
49
UKP200H
UKP300H
D1
69,0
69,0
74,9
74,9
74,9
81,0
82,0
87,5
86,5
94,0
91,5
100,5
-
D2
76,2
76,2
80,0
83,0
80,0
84,2
84,2
85,0
89,0
85,0
86,0
98,0
97,0
98,0
96,8
105,0
102,0
105,0
102,0
110,0
113,0
110,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
77,0
77,0
***
***
89,0
89,0
89,0
***
***
89,0
89,0
***
-
P211
P211
P211
P211
P212
P311
P311
P312
P212
P212
P212
P212
P213
P312
P312
P313
P213
P213
P215
P313
P313
P315
P214
P214
P216
P314
P314
P316
P215
P215
P217
P315
P315
P317
UC211
US211
ES211
EX211
UK212 + H2312
UC311
EX311
UK312 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC312
EX312
UK313 + H2313
UC213
EX213
UK215 + H2315
UC313
EX313
UK315 + H2315
UC214
EX214
UK216 + H2316
UC314
EX314
UK316 + H2316
UC215
EX215
UK217 + H2317
UC315
EX315
UK317 + H2317
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
C0r
[kN]
[kg]
43,55
43,55
43,55
43,55
52,50
71,50
71,50
81,60
52,50
52,50
52,50
52,50
57,20
81,60
81,60
93,86
57,20
57,20
66,00
93,86
93,86
113,36
62,00
62,00
72,50
104,26
104,26
122,85
66,00
66,00
83,20
113,36
113,36
132,60
29,20
29,20
29,20
29,20
32,80
44,80
44,80
51,80
32,80
32,80
32,80
32,80
40,00
51,80
51,80
60,50
40,00
40,00
49,50
60,50
60,50
76,80
45,00
45,00
54,20
68,00
68,00
86,50
49,50
49,50
63,80
76,80
76,80
96,50
3,7
3,6
3,4
3,9
5,0
7,6
8,0
9,5
5,0
4,8
4,7
5,4
6,1
9,5
9,8
11,2
6,1
6,6
6,9
11,2
11,6
15,9
6,6
7,1
9,4
13,1
13,6
19,2
7,3
8,0
11,3
15,2
16,2
21,4
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
UCP200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXP200
EXP300
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESP200
USP200
d
[mm]
55
60
65
70
75
INDUSTRY
4/12/08
15:45
Page 15
Pillow block unit
General
Housing
P200 relubricatable
P300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCP200
UCP300
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
292
292
327
400
400
430
310
310
420
420
470
327
327
430
430
490
470
470
490
490
520
490
520
570
600
570
620
600
620
88,9
88,9
101,6
106,0
106,0
118,0
95,2
95,2
112,0
112,0
125,0
101,6
101,6
118,0
118,0
140,0
125,0
125,0
140,0
140,0
150,0
140,0
150,0
160,0
180,0
160,0
200,0
180,0
200,0
51
51
55
66
66
72
53
53
69
69
75
55
55
72
72
81
75
75
81
81
83
80
83
88
94
88
92
94
92
78
78
88
110
110
110
83
83
110
110
120
88
88
110
110
120
120
120
120
120
140
120
140
140
140
140
140
140
140
232
232
262
300
300
330
247
247
320
320
360
262
262
330
330
380
360
360
380
380
400
380
400
450
480
450
500
480
500
25
25
27
27
27
33
25
25
33
33
36
27
27
33
33
36
36
36
36
36
40
36
40
40
40
40
40
40
40
31
31
33
40
40
45
31
31
45
45
50
33
33
45
45
50
50
50
50
50
55
50
55
55
55
55
55
55
55
91
91
100
110
110
120
96
96
120
120
125
100
100
120
120
130
125
125
130
130
135
130
135
140
140
140
140
140
140
30
30
34
40
40
45
32
32
40
40
45
34
34
45
45
50
45
45
50
50
55
50
55
65
75
65
75
75
75
175
175
200
210
210
235
187
187
220
220
250
200
200
235
235
275
250
250
275
275
300
280
300
320
355
320
390
355
390
42,0
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
86,0
86,0
90,0
97,0
105,0
112,0
121,0
131,0
-
82,6
95,2
86,0
106,4
85,7
73,2
96,0
109,5
96,0
72,5
96,0
115,9
103,0
122,3
108,0
128,6
112,0
117,0
126,0
135,0
145,0
s
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
50
UCP216
EXP216
UKP218H
UCP316
EXP316
UKP318H
UCP217
EXP217
UCP317
EXP317
UKP319H
UCP218
EXP218
UCP318
EXP318
UKP320H
UCP319
EXP319
UCP320
EXP320
UKP322H
UCP321
UCP322
UKP324H
UKP326H
UCP324
UKP328H
UCP326
UCP328
33,3
37,3
34,0
40,5
34,1
23,4
40,0
42,0
39,7
24,5
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
4/12/08
15:45
Page 16
SNR Industry
51
EXP200
EXP300
98,0
107,9
105,1
114,0
111,0
120,0
126,5
134,5
140,5
149,0
163,0
177,0
190,0
D2
110,0
120,0
119,0
120,0
119,0
127,0
125,0
120,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
G
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
-
P216
P216
P218
P316
P316
P318
P217
P217
P317
P317
P319
P218
P218
P318
P318
P320
P319
P319
P320
P320
P322
P321
P322
P324
P326
P324
P328
P326
P328
UC216
EX216
UK218 + H2318
UC316
EX316
UK318 + H2318
UC217
EX217
UC317
EX317
UK319 + H2319
UC218
EX218
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
-
-
C0r
[kN]
[kg]
72,50
72,50
96,00
122,85
122,85
143,00
83,20
83,20
132,60
132,60
156,00
96,00
96,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
54,20
54,20
71,50
86,50
86,50
108,00
63,80
63,80
96,50
96,50
122,00
71,50
71,50
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
8,9
9,3
13,7
19,0
20,1
25,2
10,8
11,2
21,4
22,5
30,8
13,5
13,9
25,1
26,3
37,8
30,5
32,0
38,1
39,9
51,3
38,5
47,9
61,5
79,9
58,8
96,3
75,0
90,4
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
-
UCP200CO(CC)
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UKP200H
UKP300H
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
n
*
rat amic
ing loa *
d
Sta
t
rat ic loa
ing d
ESP200
ert
USP200
d
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:45
Page 17
Pillow block unit
General
Housing
PH200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPH200
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
80
80
80
80
80
90
90
90
90
90
95
95
95
95
95
100
22
19
19
22
22
19
19
22
22
19
19
22
22
22
22
22
24
24
24
24
24
28
28
28
28
28
30
30
30
30
30
34
40
38
38
40
40
38
38
40
40
38
38
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
70
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
105
105
105
105
105
121
121
121
121
121
127
127
127
127
127
137
13
12
12
13
13
12
12
13
13
12
12
13
13
13
13
13
13
13
13
13
13
17
17
17
17
17
17
17
17
17
17
17
19
16
16
19
19
16
16
19
19
16
16
19
19
19
19
19
19
19
19
19
19
21
21
21
21
21
21
21
21
21
21
25
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
48
50
50
50
50
50
56
56
56
56
56
56
56
56
56
56
58
15
13
13
15
15
13
13
15
15
13
13
15
15
15
15
15
16
16
16
16
16
18
18
18
18
18
19
19
19
19
19
19
101
97
97
101
101
97
97
101
101
97
97
101
101
101
101
101
114
114
114
114
114
130
130
130
130
130
140
140
140
140
140
149
18,5
20,5
22,5
24,5
35,0
38,0
43,0
46,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
-
[mm]
12
15
17
20
25
30
35
SNR Industry
52
UCPH201
USPH201
ESPH201
EXPH201
UCPH202
USPH202
ESPH202
EXPH202
UCPH203
USPH203
ESPH203
EXPH203
UCPH204
USPH204
ESPH204
EXPH204
UKPH205H
UCPH205
USPH205
ESPH205
EXPH205
UKPH206H
UCPH206
USPH206
ESPH206
EXPH206
UKPH207H
UCPH207
USPH207
ESPH207
EXPH207
UKPH208H
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
140
140
140
140
140
165
165
165
165
165
167
167
167
167
167
184
4/12/08
15:45
Page 18
SNR Industry
53
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
44,6
40,6
***
***
44,6
40,6
***
***
44,6
40,6
***
***
44,6
44,6
***
***
47,8
47,8
47,8
***
***
52,8
52,8
52,8
***
***
57,4
57,4
57,4
***
***
66,8
PH204
PH203
PH203
PH204
PH204
PH203
PH203
PH204
PH204
PH203
PH203
PH204
PH204
PH204
PH204
PH204
PH205
PH205
PH205
PH205
PH205
PH206
PH206
PH206
PH206
PH206
PH207
PH207
PH207
PH207
PH207
PH208
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
0,9
0,7
0,7
1,0
0,9
0,7
0,7
1,0
0,8
0,7
0,7
1,0
0,9
0,8
0,9
0,9
1,2
1,2
1,2
1,2
1,2
1,8
1,7
1,7
1,7
1,8
2,3
2,2
2,2
2,3
2,4
2,9
aft
dia
me
ter
t
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
UCPH200CO(CC)
Sh
UKPH200H
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXPH200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESPH200
USPH200
d
[mm]
12
15
17
20
25
30
35
INDUSTRY
4/12/08
15:45
Page 19
Pillow block unit
General
Housing
PH200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPH200
d
L
H
A1
A
J
N
N1
L1
H1
H2
s1
B
B1
s
184
184
184
184
190
190
190
190
190
206
206
206
206
206
100
100
100
100
105
105
105
105
105
110
110
110
110
110
34
34
34
34
36
36
36
36
36
36
36
36
36
36
70
70
70
70
70
70
70
70
70
70
70
70
70
70
137
137
137
137
146
146
146
146
146
159
159
159
159
159
17
17
17
17
17
17
17
17
17
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
58
58
58
58
62
62
62
62
62
65
65
65
65
65
19
19
19
19
20
20
20
20
20
22
22
22
22
22
149
149
149
149
157
157
157
157
157
165
165
165
165
165
26,0
27,5
-
50,0
55,0
-
49,2
34,0
43,7
56,3
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
19,0
9,0
11,0
21,4
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
[mm]
40
45
50
SNR Industry
54
UCPH208
USPH208
ESPH208
EXPH208
UKPH209H
UCPH209
USPH209
ESPH209
EXPH209
UKPH210H
UCPH210
USPH210
ESPH210
EXPH210
4/12/08
15:45
Page 20
SNR Industry
55
53,0
53,0
57,2
57,2
61,8
61,8
-
D2
60,3
60,3
65,0
63,5
63,5
70,0
69,9
69,9
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
66,8
66,8
***
***
67,8
67,8
67,8
***
***
74,6
74,6
74,6
***
***
Dz
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
PH208
PH208
PH208
PH208
PH209
PH209
PH209
PH209
PH209
PH210
PH210
PH210
PH210
PH210
UC208
US208
ES208
EX208
UK209 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
t
*
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UCPH200CO(CC)
Cr
C0r
[kN]
[kN]
[kg]
29,60
29,60
29,60
29,60
31,85
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
18,20
18,20
18,20
18,20
20,80
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
2,8
2,8
2,8
3,0
3,3
3,1
3,1
3,1
3,3
3,8
3,6
3,6
3,6
3,8
aft
dia
me
ter
UKPH200H
Sh
EXPH200
ert
ESPH200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
USPH200
d
[mm]
40
45
50
INDUSTRY
4/12/08
15:45
Page 21
Pillow block unit
General
Housing
PAE200 relubricatable
Sh
aft
dia
me
ter
Un
it
UCPAE200
d
L
L1
H
H1
A1
A
J
N
E
H2
s1
B
B1
s
65
63
63
65
65
63
63
65
65
63
63
65
65
65
65
65
70
70
70
70
70
98
98
98
98
98
103
103
103
103
103
116
116
116
116
116
120
18,0
17,5
17,5
18,0
18,0
17,5
17,5
18,0
18,0
17,5
17,5
18,0
18,0
18,0
18,0
18,0
21,0
21,0
21,0
21,0
21,0
22,0
22,0
22,0
22,0
22,0
22,5
22,5
22,5
22,5
22,5
27,0
27,0
27,0
27,0
27,0
29,0
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
33,3
33,3
33,3
36,5
36,5
36,5
36,5
36,5
42,9
42,9
42,9
42,9
42,9
47,6
47,6
47,6
47,6
47,6
49,2
49,2
49,2
49,2
49,2
53,9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
13
13
13
13
13
14
19
18
18
19
19
18
18
19
19
18
18
19
19
19
19
19
21
21
21
21
21
25
25
25
25
25
27
27
27
27
27
30
30
30
30
30
32
32
30
30
32
32
30
30
32
32
30
30
32
32
32
32
32
36
36
36
36
36
38
38
38
38
38
45
45
45
45
45
47
47
47
47
47
48
50,8
47,0
47,0
50,8
50,8
47,0
47,0
50,8
50,8
47,0
47,0
50,8
50,8
50,8
50,8
50,8
50,8
50,8
50,8
50,8
50,8
76,2
76,2
76,2
76,2
76,2
82,6
82,6
82,6
82,6
82,6
88,9
88,9
88,9
88,9
88,9
95,3
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
15,0
15,0
15,0
15,0
15,0
15,0
64
57
57
64
64
57
57
64
64
57
57
64
64
64
64
64
70
70
70
70
70
82
82
82
82
82
93
93
93
93
93
99
99
99
99
99
107
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
56
UCPAE201
USPAE201
ESPAE201
EXPAE201
UCPAE202
USPAE202
ESPAE202
EXPAE202
UCPAE203
USPAE203
ESPAE203
EXPAE203
UCPAE204
USPAE204
ESPAE204
EXPAE204
UKPAE205H
UCPAE205
USPAE205
ESPAE205
EXPAE205
UKPAE206H
UCPAE206
USPAE206
ESPAE206
EXPAE206
UKPAE207H
UCPAE207
USPAE207
ESPAE207
EXPAE207
UKPAE208H
UCPAE208
USPAE208
ESPAE208
EXPAE208
UKPAE209H
4/12/08
15:45
Page 22
SNR Industry
57
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
44,6
40,6
***
***
44,6
40,6
***
***
44,6
40,6
***
***
44,6
44,6
***
***
47,8
47,8
47,8
***
***
52,8
52,8
52,8
***
***
57,4
57,4
57,4
***
***
66,8
66,8
66,8
***
***
67,8
ins
Be
arin
g
ing
Ho
us
D1
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
PAE204
PAE203
PAE203
PAE204
PAE204
PAE203
PAE203
PAE204
PAE204
PAE203
PAE203
PAE204
PAE204
PAE204
PAE204
PAE204
PAE205
PAE205
PAE205
PAE205
PAE205
PAE206
PAE206
PAE206
PAE206
PAE206
PAE207
PAE207
PAE207
PAE207
PAE207
PAE208
PAE208
PAE208
PAE208
PAE208
PAE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UCPAE200CO(CC)
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,5
0,3
0,4
0,6
0,5
0,3
0,4
0,6
0,4
0,4
0,4
0,5
0,5
0,4
0,4
0,5
0,6
0,6
0,6
0,6
0,6
1,0
1,0
0,9
1,0
1,1
1,4
1,3
1,3
1,3
1,4
1,7
1,6
1,6
1,6
1,8
2,0
aft
dia
me
ter
UKPAE200H
Sh
EXPAE200
Op
e
tive n pro
t
Clo caps ecsed *
tive
c prot
Dy aps ecn
**
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
We
igh
t
ESPAE200
ert
USPAE200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:45
Page 23
Pillow block unit
General
Housing
PAE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPAE200
d
L
L1
H
H1
A1
A
J
N
E
H2
s1
B
B1
s
120
120
120
120
135
135
135
135
135
150
150
150
150
150
150
150
150
150
150
29,0
29,0
29,0
29,0
33,5
33,5
33,5
33,5
33,5
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
53,9
53,9
53,9
53,9
57,2
57,2
57,2
57,2
57,2
64,0
64,0
64,0
64,0
64,0
69,9
69,9
69,9
69,9
69,9
14
14
14
14
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
32
32
32
32
34
34
34
34
34
35
35
35
35
35
42
42
42
42
42
48
48
48
48
54
54
54
54
54
60
60
60
60
60
60
60
60
60
60
95,3
95,3
95,3
95,3
101,6
101,6
101,6
101,6
101,6
118,0
118,0
118,0
118,0
118,0
118,0
118,0
118,0
118,0
118,0
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
15,0
15,0
15,0
15,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
20,0
107
107
107
107
115
115
115
115
115
125
125
125
125
125
140
140
140
140
140
27,5
29,0
31,0
-
55,0
59,0
62,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
[mm]
45
50
55
60
SNR Industry
58
UCPAE209
USPAE209
ESPAE209
EXPAE209
UKPAE210H
UCPAE210
USPAE210
ESPAE210
EXPAE210
UKPAE211H
UCPAE211
USPAE211
ESPAE211
EXPAE211
UKPAE212H
UCPAE212
USPAE212
ESPAE212
EXPAE212
4/12/08
15:45
Page 24
SNR Industry
59
UKPAE200H
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
-
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
67,8
67,8
***
***
74,6
74,6
74,6
***
***
75,2
75,2
75,2
***
***
87,8
87,8
87,8
***
***
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
PAE209
PAE209
PAE209
PAE209
PAE210
PAE210
PAE210
PAE210
PAE210
PAE211
PAE211
PAE211
PAE211
PAE211
PAE212
PAE212
PAE212
PAE212
PAE212
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
1,9
1,9
1,9
2,1
2,6
2,5
2,4
2,5
2,7
3,3
3,2
3,2
3,0
3,5
4,0
4,0
3,8
3,7
4,4
aft
dia
me
ter
Sh
t
ins
Be
arin
g
ing
Ho
us
D1
UCPAE200CO(CC)
We
igh
EXPAE200
Op
tiveen pr
c ot
Clo aps ecsed *
tive
capprote
s cDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESPAE200
ert
USPAE200
d
[mm]
45
50
55
60
INDUSTRY
4/12/08
15:45
Page 25
Pillow block unit
General
Housing
PG200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPG200
d
L
H
A1
A
J
N
E
L1
H1
H2
s1
B
B1
s
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
30,2
30,2
33,3
33,3
33,3
33,3
33,3
36,5
36,5
36,5
36,5
36,5
42,9
42,9
42,9
42,9
42,9
47,6
47,6
47,6
47,6
47,6
49,2
49,2
49,2
49,2
49,2
53,9
20
13
13
20
20
13
13
20
20
13
13
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
27
27
27
27
27
30
30
30
30
30
33
38
30
30
38
38
30
30
38
38
30
30
38
38
38
38
38
38
38
38
38
38
48
48
48
48
48
48
48
48
48
48
54
54
54
54
54
54
49
38
38
49
49
38
38
49
49
38
38
49
49
49
49
49
50
50
50
50
50
60
60
60
60
60
68
68
68
68
68
78
78
78
78
78
85
M8
M6
M6
M8
M8
M6
M6
M8
M8
M6
M6
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
16
15
15
16
16
15
15
16
16
15
15
16
16
16
16
16
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
22
22
22
22
22
21
17
17
21
21
17
17
21
21
17
17
21
21
21
21
21
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
40
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
17
17
17
17
17
20
20
20
20
20
20
20
20
20
20
20
64
57
57
64
64
57
57
64
64
57
57
64
64
64
64
64
70
70
70
70
70
83
83
83
83
83
93
93
93
93
93
98
98
98
98
98
106
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
60
UCPG201
USPG201
ESPG201
EXPG201
UCPG202
USPG202
ESPG202
EXPG202
UCPG203
USPG203
ESPG203
EXPG203
UCPG204
USPG204
ESPG204
EXPG204
UKPG205H
UCPG205
USPG205
ESPG205
EXPG205
UKPG206H
UCPG206
USPG206
ESPG206
EXPG206
UKPG207H
UCPG207
USPG207
ESPG207
EXPG207
UKPG208H
UCPG208
USPG208
ESPG208
EXPG208
UKPG209H
70
55
55
70
70
55
55
70
70
55
55
70
70
70
70
70
75
75
75
75
75
85
85
85
85
85
100
100
100
100
100
110
110
110
110
110
120
4/12/08
15:45
Page 26
SNR Industry
61
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
44,6
40,6
***
***
44,6
40,6
***
***
44,6
40,6
***
***
44,6
42,6
***
***
47,8
47,8
47,8
***
***
52,8
52,8
52,8
***
***
57,4
57,4
57,4
***
***
66,8
66,8
66,8
***
***
67,8
PG204
PG203
PG203
PG204
PG204
PG203
PG203
PG204
PG204
PG203
PG203
PG204
PG204
PG204
PG204
PG204
PG205
PG205
PG205
PG205
PG205
PG206
PG206
PG206
PG206
PG206
PG207
PG207
PG207
PG207
PG207
PG208
PG208
PG208
PG208
PG208
PG209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,6
0,3
0,4
0,7
0,6
0,3
0,4
0,7
0,4
0,3
0,4
0,7
0,6
0,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
1,1
1,1
1,0
1,1
1,2
1,6
1,5
1,5
1,6
1,7
1,9
1,8
1,8
1,8
2,0
2,3
aft
dia
me
ter
t
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
UCPG200CO(CC)
Sh
UKPG200H
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXPG200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
n
*
rat amic
ing loa *
d
Sta
t
rat ic loa
ing d
ESPG200
USPG200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:45
Page 27
Pillow block unit
General
Housing
PG200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPG200
d
L
H
A1
A
J
N
E
L1
H1
H2
s1
B
B1
s
120
120
120
120
135
135
135
135
135
140
140
140
140
140
150
150
150
150
150
53,9
53,9
53,9
53,9
57,2
57,2
57,2
57,2
57,2
63,5
63,5
63,5
63,5
63,5
69,8
69,8
69,8
69,8
69,8
33
33
33
33
35
35
35
35
35
34
34
34
34
34
40
40
40
40
40
54
54
54
54
60
60
60
60
60
60
60
60
60
60
70
70
70
70
70
85
85
85
85
95
95
95
95
95
100
100
100
100
100
105
105
105
105
105
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
40
40
40
40
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
20
20
20
20
21
21
21
21
21
25
25
25
25
25
25
25
25
25
25
106
106
106
106
114
114
114
114
114
126
126
126
126
126
138
138
138
138
138
27,5
29,0
31,0
-
55,0
59,0
62,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
[mm]
45
50
55
60
SNR Industry
62
UCPG209
USPG209
ESPG209
EXPG209
UKPG210H
UCPG210
USPG210
ESPG210
EXPG210
UKPG211H
UCPG211
USPG211
ESPG211
EXPG211
UKPG212H
UCPG212
USPG212
ESPG212
EXPG212
4/12/08
15:45
Page 28
SNR Industry
63
D1
D2
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
-
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
67,8
67,8
***
***
74,6
74,6
74,6
***
***
75,2
75,2
75,2
***
***
87,8
87,8
87,8
***
***
PG209
PG209
PG209
PG209
PG210
PG210
PG210
PG210
PG210
PG211
PG211
PG211
PG211
PG211
PG212
PG212
PG212
PG212
PG212
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
2,2
2,1
2,2
2,4
2,9
2,8
2,8
2,8
3,0
3,5
3,5
3,4
3,2
3,7
4,7
4,7
4,5
4,4
5,0
aft
dia
me
ter
t
*
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
UCPG200CO(CC)
Sh
UKPG200H
We
igh
Be
arin
g
Ho
us
ing
ins
ert
EXPG200
Op
tiveen p
c ro
Clo aps tectivesed
capprot
s ecDy
n
*
rat amic
ing loa *
d
Sta
t
rat ic loa
ing d
ESPG200
USPG200
d
[mm]
45
50
55
60
INDUSTRY
4/12/08
15:45
Page 29
Pillow block unit
General
Housing
PA200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCPA200
d
L
H
A1
A
J
N
E
L1
H1
H2
s1
B
B1
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
30,2
36,5
36,5
36,5
36,5
36,5
42,9
42,9
42,9
42,9
42,9
47,6
47,6
47,6
47,6
47,6
49,2
49,2
49,2
49,2
49,2
54,2
22
19
19
22
22
19
19
22
22
19
19
22
22
22
22
22
23
23
23
23
23
25
25
25
25
25
27
27
27
27
27
28
28
28
28
28
32
40
36
36
40
40
36
36
40
40
36
36
40
40
40
40
40
38
38
38
38
38
48
48
48
48
48
48
48
48
48
48
54
54
54
54
54
60
52
48
48
52
52
48
48
52
52
48
48
52
52
52
52
52
56
56
56
56
56
66
66
66
66
66
80
80
80
80
80
84
84
84
84
84
90
M10
M8
M8
M10
M10
M8
M8
M10
M10
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
M14
13
9
9
13
13
9
9
13
13
9
9
13
13
13
13
13
15
15
15
15
15
18
18
18
18
18
20
20
20
20
20
20
20
20
20
20
25
22
20
20
22
22
20
20
22
22
20
20
22
22
22
22
22
27
27
27
27
27
30
30
30
30
30
30
30
30
30
30
32
32
32
32
32
42
11
10
10
11
11
10
10
11
11
10
10
11
11
11
11
11
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
62
57
57
62
62
57
57
62
62
57
57
62
62
62
62
62
72
72
72
72
72
84
84
84
84
84
95
95
95
95
95
100
100
100
100
100
108
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
s
[mm]
12
15
17
20
25
30
35
40
SNR Industry
64
UCPA201
USPA201
ESPA201
EXPA201
UCPA202
USPA202
ESPA202
EXPA202
UCPA203
USPA203
ESPA203
EXPA203
UCPA204
USPA204
ESPA204
EXPA204
UKPA205H
UCPA205
USPA205
ESPA205
EXPA205
UKPA206H
UCPA206
USPA206
ESPA206
EXPA206
UKPA207H
UCPA207
USPA207
ESPA207
EXPA207
UKPA208H
UCPA208
USPA208
ESPA208
EXPA208
UKPA209H
76
70
70
76
76
70
70
76
76
70
70
76
76
76
76
76
84
84
84
84
84
94
94
94
94
94
110
110
110
110
110
116
116
116
116
116
120
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
4/12/08
15:45
Page 30
SNR Industry
65
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
45,6
42,6
64
56
45,6
42,6
64
56
45,6
42,6
64
56
45,6
45,6
64
64
48
48
48
65,2
65,2
51,8
51,8
51,8
70
70
60
60
60
78,6
78,6
68,4
68,4
68,4
80,6
80,6
70,2
Dz
54
46
***
***
54
46
***
***
54
46
***
***
54
54
***
***
60
60
60
***
***
70
70
70
***
***
80
80
80
***
***
88
88
88
***
***
95
PA204
PA203
PA203
PA204
PA204
PA203
PA203
PA204
PA204
PA203
PA203
PA204
PA204
PA204
PA204
PA204
PA205
PA205
PA205
PA205
PA205
PA206
PA206
PA206
PA206
PA206
PA207
PA207
PA207
PA207
PA207
PA208
PA208
PA208
PA208
PA208
PA209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,6
0,4
0,4
0,7
0,6
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,5
0,5
0,6
0,8
0,7
0,7
0,7
0,8
1,1
1,1
1,0
1,1
1,2
1,5
1,5
1,4
1,5
1,6
1,8
1,8
1,7
1,8
1,9
2,2
* = Equipped with one open protective caps for passing shafts: Suffix CO see example on page 6
** = Equipped with one closed protective cap for shaft ends: Suffix CC see example on page 6
*** = Protective cap for inserts with eccentric locking collar available on request.
aft
dia
me
ter
Sh
t
Op
tiveen p
caprote
* cClo
tivesed
capprot
ecDy
**
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ins
ert
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
Be
arin
g
ing
Ho
us
D1
UKPA200H
EXPA200
We
igh
ESPA200
USPA200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:45
Page 31
Pillow block unit
General
Housing
PA200 relubricatable
Sh
aft
dia
me
ter
Un
it
UCPA200
d
L
H
A1
A
J
N
E
L1
H1
H2
s1
B
B1
120
120
120
120
130
130
130
130
130
140
140
140
140
140
150
150
150
150
150
54,2
54,2
54,2
54,2
57,2
57,2
57,2
57,2
57,2
63,5
63,5
63,5
63,5
63,5
69,9
69,9
69,9
69,9
69,9
32
32
32
32
32
32
32
32
32
33
33
33
33
33
36
36
36
36
36
60
60
60
60
60
60
60
60
60
66
66
66
66
66
68
68
68
68
68
90
90
90
90
94
94
94
94
94
104
104
104
104
104
114
114
114
114
114
M14
M14
M14
M14
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
42
42
42
42
35
35
35
35
35
47
47
47
47
47
52
52
52
52
52
13
13
13
13
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
108
108
108
108
116
116
116
116
116
125
125
125
125
125
138
138
138
138
138
27,5
29,0
31,0
-
55,0
59,0
62,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
s
[mm]
45
50
55
60
SNR Industry
66
UCPA209
USPA209
ESPA209
EXPA209
UKPA210H
UCPA210
USPA210
ESPA210
EXPA210
UKPA211H
UCPA211
USPA211
ESPA211
EXPA211
UKPA212H
UCPA212
USPA212
ESPA212
EXPA212
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
4/12/08
15:45
Page 32
SNR Industry
67
D1
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
-
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
70,2
70,2
84,4
84,4
75,6
75,6
75,6
91
91
77
77
77
103,8
103,8
90
90
90
111,2
111,2
Dz
95
95
***
***
100
100
100
***
***
110
110
110
***
***
120
120
120
***
***
PA209
PA209
PA209
PA209
PA210
PA210
PA210
PA210
PA210
PA211
PA211
PA211
PA211
PA211
PA212
PA212
PA212
PA212
PA212
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
2,1
2,1
2,1
2,3
2,7
2,6
2,5
2,6
2,8
3,3
3,2
3,1
2,9
3,5
4,1
4,1
3,9
3,8
4,5
Sh
t
Cr
aft
dia
me
ter
UKPA200H
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXPA200
Op
tiveen p
caprote
* cClo
tivesed
capprot
ecDy
**
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESPA200
USPA200
d
[mm]
45
50
55
60
INDUSTRY
4/12/08
15:46
Page 33
Flanged unit
General
Housing
FE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFE200
d
L
J
A
A1
A2
e
N
s1
B
B1
s
D1
29,5
31,0
31,0
29,5
29,5
31,0
31,0
29,5
29,5
31,0
31,0
29,5
29,5
29,5
29,5
29,5
30,0
30,0
30,0
30,0
30,0
33,5
33,5
33,5
33,5
33,5
36,0
36,0
36,0
36,0
36,0
39,5
39,5
39,5
39,5
39,5
40,0
10,0
9,5
9,5
10,0
10,0
9,5
9,5
10,0
10,0
9,5
9,5
10,0
10,0
10,0
10,0
10,0
11,0
11,0
11,0
11,0
11,0
12,0
12,0
12,0
12,0
12,0
12,5
12,5
12,5
12,5
12,5
13,0
13,0
13,0
13,0
13,0
13,0
37,3
33,0
39,1
45,5
37,3
33,0
39,1
45,5
37,3
33,0
39,1
45,5
37,3
37,0
42,4
45,5
37,5
38,7
38,5
42,4
45,9
40,5
42,2
42,0
46,7
50,1
43,5
46,4
44,5
50,4
53,3
48,5
54,2
49,0
56,7
58,9
50,0
19,0
17,0
17,0
19,0
19,0
17,0
17,0
19,0
19,0
17,0
17,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
19,0
20,0
20,0
20,0
20,0
20,0
21,0
21,0
21,0
21,0
21,0
24,0
24,0
24,0
24,0
24,0
24,0
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
68
UCFE201
USFE201
ESFE201
EXFE201
UCFE202
USFE202
ESFE202
EXFE202
UCFE203
USFE203
ESFE203
EXFE203
UCFE204
USFE204
ESFE204
EXFE204
UKFE205H
UCFE205
USFE205
ESFE205
EXFE205
UKFE206H
UCFE206
USFE206
ESFE206
EXFE206
UKFE207H
UCFE207
USFE207
ESFE207
EXFE207
UKFE208H
UCFE208
USFE208
ESFE208
EXFE208
UKFE209H
86
76
76
86
86
76
76
86
86
76
76
86
86
86
86
86
95
95
95
95
95
108
108
108
108
108
118
118
118
118
118
130
130
130
130
130
137
63,5
54,0
54,0
63,5
63,5
54,0
54,0
63,5
63,5
54,0
54,0
63,5
63,5
63,5
63,5
63,5
70,0
70,0
70,0
70,0
70,0
82,5
82,5
82,5
82,5
82,5
92,0
92,0
92,0
92,0
92,0
101,5
101,5
101,5
101,5
101,5
105,0
4/12/08
15:46
Page 34
SNR Industry
69
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
42,8
42,8
***
***
42,8
42,8
***
***
42,8
42,8
***
***
42,8
42,8
***
***
42,9
42,9
42,9
***
***
46,9
46,9
46,9
***
***
50,2
50,2
50,2
***
***
57,9
57,9
57,9
***
***
58,4
UKFE200H
FE204
FE203
FE203
FE204
FE204
FE203
FE203
FE204
FE204
FE203
FE203
FE204
FE204
FE204
FE204
FE204
FE205
FE205
FE205
FE205
FE205
FE206
FE206
FE206
FE206
FE206
FE207
FE207
FE207
FE207
FE207
FE208
FE208
FE208
FE208
FE208
FE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
C0r
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,7
0,4
0,5
0,8
0,7
0,4
0,5
0,8
0,5
0,4
0,5
0,8
0,7
0,6
0,7
0,7
0,8
0,8
0,8
0,8
0,9
1,2
1,2
1,1
1,2
1,3
1,6
1,6
1,5
1,6
1,7
2,1
2,1
2,0
2,1
2,2
2,4
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
UCFE200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXFE200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFE200
USFE200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:46
Page 35
Flanged unit
General
Housing
FE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFE200
d
L
J
A
A1
A2
e
N
s1
B
B1
s
D1
137
137
137
137
143
143
143
143
143
162
162
162
162
162
175
175
175
175
175
188
188
188
197
188
188
197
197
197
197
197
235
235
235
105,0
105,0
105,0
105,0
111,0
111,0
111,0
111,0
111,0
130,0
130,0
130,0
130,0
130,0
143,0
143,0
143,0
143,0
143,0
150,0
150,0
150,0
153,0
150,0
150,0
153,0
153,0
153,0
153,0
153,0
187,0
187,0
187,0
40,0
40,0
40,0
40,0
44,0
44,0
44,0
44,0
44,0
48,5
48,5
48,5
48,5
48,5
53,5
53,5
53,5
53,5
53,5
56,0
56,0
56,0
59,0
56,0
56,0
61,0
59,0
59,0
61,0
61,0
45,0
45,0
45,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
15,0
15,0
15,0
15,0
15,0
16,0
16,0
16,0
16,0
16,0
18,0
18,0
18,0
20,0
18,0
18,0
20,0
20,0
20,0
20,0
20,0
22,0
22,0
22,0
54,2
55,0
56,7
58,9
55,5
60,6
60,6
60,7
66,1
60,0
64,4
64,5
67,4
74,6
65,0
73,7
72,8
71,3
80,8
70,0
77,7
89,6
76,8
82,4
89,6
80,3
85,8
96,1
90,6
99,2
65,8
80,1
70,3
24,0
24,0
24,0
24,0
28,0
28,0
28,0
28,0
28,0
31,0
31,0
31,0
31,0
31,0
34,0
34,0
34,0
34,0
34,0
38,0
38,0
38,0
41,3
38,0
38,0
41,3
41,3
41,3
41,3
41,3
23,8
23,8
23,8
14,0
14,0
14,0
14,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
23,0
18,0
18,0
23,0
23,0
23,0
23,0
23,0
23,0
23,0
23,0
27,5
29,0
31,0
32,0
35,5
39,0
42,0
-
55,0
59,0
62,0
65,0
73,0
78,0
86,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
74,6
85,7
77,8
92,1
82,6
95,2
96,0
72,5
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
25,4
34,1
30,2
34,1
33,3
37,3
33,3
37,3
39,7
24,5
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
82,0
86,5
91,5
98,0
111,0
-
[mm]
45
50
55
60
65
70
75
80
90
SNR Industry
70
UCFE209
USFE209
ESFE209
EXFE209
UKFE210H
UCFE210
USFE210
ESFE210
EXFE210
UKFE211H
UCFE211
USFE211
ESFE211
EXFE211
UKFE212H
UCFE212
USFE212
ESFE212
EXFE212
UKFE213H
UCFE213
EXFE213
UKFE215H
UCFE214
EXFE214
UKFE216H
UCFE215
EXFE215
UCFE216
EXFE216
UKFE218H
UCFE218
EXFE218
4/12/08
15:46
Page 36
SNR Industry
71
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
98,0
96,8
105,0
102,0
110,0
120,0
120,0
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
58,4
58,4
***
***
65,8
65,8
65,8
***
***
69,1
69,1
69,1
***
***
78,4
78,4
78,4
***
***
77,4
77,4
***
-
FE209
FE209
FE209
FE209
FE210
FE210
FE210
FE210
FE210
FE211
FE211
FE211
FE211
FE211
FE212
FE212
FE212
FE212
FE212
FE213
FE213
FE213
FE215
FE214
FE214
FE216
FE215
FE215
FE216
FE216
FE218
FE218
FE218
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
UK215 + H2315
UC214
EX214
UK216 + H2316
UC215
EX215
UC216
EX216
UK218 + H2318
UC218
EX218
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
66,00
62,00
62,00
72,50
66,00
66,00
72,50
72,50
96,00
96,00
96,00
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
49,50
45,00
45,00
54,20
49,50
49,50
54,20
54,20
71,50
71,50
71,50
2,2
2,2
2,2
2,4
2,7
2,6
2,5
2,6
2,8
3,7
3,7
3,6
3,4
3,9
4,9
4,9
4,7
4,6
5,2
6,1
6,0
6,6
6,9
6,2
6,7
7,5
6,3
6,9
7,1
7,4
10,7
10,4
10,9
* = Equipped with one open protective caps for passing shafts:Suffix CO see example on page 6
*** = Protective cap for bearing inserts with eccentric locking collar at request
Sh
t
*
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
UCFE200CO(CC)
aft
dia
me
ter
UKFE200H
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXFE200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFE200
USFE200
d
[mm]
45
50
55
60
65
70
75
80
90
INDUSTRY
4/12/08
15:46
Page 37
Flanged unit
General
Housing
F200 relubricatable
F300 relubricatable
Sh
aft
dia
me
ter
Un
it
UCF200
UCF300
d
L
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
86
76
76
86
86
76
76
86
86
76
76
86
86
86
86
86
95
108
95
95
95
95
108
108
108
125
108
108
108
108
117
125
125
135
64
54
54
64
64
54
54
64
64
54
54
64
64
64
64
64
70
80
70
70
70
70
83
80
80
95
83
83
83
83
92
95
95
100
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
27,0
29,0
27,0
27,0
27,0
27,0
31,0
29,0
29,0
32,0
31,0
31,0
31,0
31,0
34,0
32,0
32,0
36,0
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
15
13
13
13
13
15
15
15
16
33,3
31,0
37,1
41,5
33,3
31,0
37,1
41,5
33,3
31,0
37,1
41,5
33,3
33,0
38,4
41,5
34,5
37,5
35,7
35,5
39,4
42,9
38,5
39,0
46,1
41,0
40,2
40,0
44,7
48,1
41,5
44,0
50,5
45,5
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
18
16
16
18
18
18
18
18
19
18
18
20
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
16
12
12
12
12
12
16
16
16
12
12
12
12
14
16
16
19
18,5
21,5
20,5
23,0
22,5
25,5
35,0
35,0
38,0
38,0
43,0
43,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,0
46,8
38,1
30,0
35,7
48,3
43,0
50,0
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,0
16,7
15,9
8,0
9,0
18,2
17,0
17,5
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
35,4
40,3
40,3
44,6
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,0
38,1
38,1
45,0
42,8
45,0
44,5
44,5
52,0
50,0
52,0
[mm]
12
15
17
20
25
30
SNR Industry
72
UCF201
USF201
ESF201
EXF201
UCF202
USF202
ESF202
EXF202
UCF203
USF203
ESF203
EXF203
UCF204
USF204
ESF204
EXF204
UKF205H
UKF305H
UCF205
USF205
ESF205
EXF205
UKF206H
UCF305
EXF305
UKF306H
UCF206
USF206
ESF206
EXF206
UKF207H
UCF306
EXF306
UKF307H
4/12/08
15:46
Page 38
SNR Industry
73
UKF200H
UKF300H
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
36,6
36,3
***
***
36,6
36,3
***
***
36,6
36,3
***
***
36,6
36,6
***
***
39,2
39,2
39,2
***
***
44,2
44,2
44,2
***
***
48,3
-
F204
F203
F203
F204
F204
F203
F203
F204
F204
F203
F203
F204
F204
F204
F204
F204
F205
F305
F205
F205
F205
F205
F206
F305
F305
F306
F206
F206
F206
F206
F207
F306
F306
F307
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UK305 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC305
EX305
UK306 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC306
EX306
UK307 + H2307
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
C0r
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
22,36
14,00
14,00
14,00
14,00
19,50
22,36
22,36
27,00
19,50
19,50
19,50
19,50
25,70
27,00
27,00
33,50
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
11,50
7,88
7,88
7,88
7,88
11,20
11,50
11,50
15,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
19,20
0,6
0,4
0,5
0,7
0,6
0,4
0,5
0,7
0,5
0,4
0,5
0,7
0,6
0,6
0,6
0,7
0,8
1,2
0,8
0,8
0,8
0,9
1,2
1,1
1,2
1,6
1,1
1,1
1,1
1,2
1,6
1,6
1,7
2,2
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
-
UCF200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXF200
EXF300
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESF200
USF200
d
[mm]
12
15
17
20
25
30
INDUSTRY
4/12/08
15:46
Page 39
Flanged unit
General
Housing
F200 relubricatable
F300 relubricatable
Sh
aft
dia
me
ter
Un
it
UCF200
UCF300
d
L
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
34,0
34,0
34,0
34,0
36,0
36,0
36,0
40,0
36,0
36,0
36,0
36,0
38,0
40,0
40,0
44,0
38,0
38,0
38,0
38,0
40,0
44,0
44,0
48,0
40,0
40,0
40,0
40,0
43,0
48,0
48,0
52,0
15
15
15
15
15
16
16
17
15
15
15
15
16
17
17
18
16
16
16
16
16
18
18
20
16
16
16
16
18
20
20
20
44,4
42,5
48,4
51,3
45,5
49,0
53,3
50,5
51,2
46,0
53,7
55,9
48,0
56,0
60,3
55,0
52,2
53,0
54,7
56,9
49,5
60,0
63,9
60,0
54,6
54,6
54,7
60,1
54,0
67,0
70,0
64,0
19
19
19
19
21
20
20
23
21
21
21
21
22
23
23
25
22
22
22
22
22
25
25
28
22
22
22
22
25
28
28
30
14
14
14
14
16
19
19
19
16
16
16
16
16
19
19
19
16
16
16
16
16
19
19
23
16
16
16
16
19
23
23
23
24,5
27,5
26,0
30,0
27,5
32,0
29,0
34,0
46,0
46,0
50,0
50,0
55,0
55,0
59,0
59,0
42,9
32,0
38,9
51,1
48,0
51,6
49,2
34,0
43,7
56,3
52,0
57,1
49,2
41,2
43,7
56,3
57,0
58,7
51,6
43,5
43,7
62,7
61,0
66,6
-
17,5
8,5
9,5
18,8
19,0
18,3
19,0
9,0
11,0
21,4
19,0
19,8
19,0
10,2
11,0
21,4
22,0
19,8
19,0
10,9
11,0
24,6
22,0
24,6
-
48,0
48,0
48,9
53,0
53,0
56,5
57,2
57,2
61,8
61,8
61,8
68,7
-
55,6
55,6
58,0
55,0
58,0
60,3
60,3
65,0
63,5
65,0
63,5
63,5
70,0
70,0
70,0
69,9
69,9
75,0
76,2
75,0
[mm]
35
40
45
50
SNR Industry
74
UCF207
USF207
ESF207
EXF207
UKF208H
UCF307
EXF307
UKF308H
UCF208
USF208
ESF208
EXF208
UKF209H
UCF308
EXF308
UKF309H
UCF209
USF209
ESF209
EXF209
UKF210H
UCF309
EXF309
UKF310H
UCF210
USF210
ESF210
EXF210
UKF211H
UCF310
EXF310
UKF311H
117
117
117
117
130
135
135
150
130
130
130
130
137
150
150
160
137
137
137
137
143
160
160
175
143
143
143
143
162
175
175
185
92
92
92
92
102
100
100
112
102
102
102
102
105
112
112
125
105
105
105
105
111
125
125
132
111
111
111
111
130
132
132
140
4/12/08
15:46
Page 40
SNR Industry
75
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
48,3
48,3
***
***
55,2
55,2
55,2
***
***
56,3
56,3
56,3
***
***
59,3
59,3
59,3
***
***
62,8
-
Dz
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
-
F207
F207
F207
F207
F208
F307
F307
F308
F208
F208
F208
F208
F209
F308
F308
F309
F209
F209
F209
F209
F210
F309
F309
F310
F210
F210
F210
F210
F211
F310
F310
F311
UC207
US207
ES207
EX207
UK208 + H2308
UC307
EX307
UK308 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UC308
EX308
UK309 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC309
EX309
UK310 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC310
EX310
UK311 + H2311
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
Cr
C0r
[kN]
[kN]
[kg]
25,70
25,70
25,70
25,70
29,60
33,50
33,50
40,56
29,60
29,60
29,60
29,60
31,85
40,56
40,56
53,00
31,85
31,85
31,85
31,85
35,10
53,00
53,00
62,00
35,10
35,10
35,10
35,10
43,55
62,00
62,00
71,50
15,20
15,20
15,20
15,20
18,20
19,20
19,20
24,00
18,20
18,20
18,20
18,20
20,80
24,00
24,00
31,80
20,80
20,80
20,80
20,80
23,20
31,80
31,80
37,80
23,20
23,20
23,20
23,20
29,20
37,80
37,80
44,80
1,5
1,5
1,5
1,6
2,0
2,0
2,1
2,8
1,9
1,9
1,9
2,1
2,3
2,7
2,8
3,5
2,1
2,1
2,1
2,3
2,7
3,3
3,5
4,5
2,5
2,5
2,5
2,7
3,4
4,4
4,6
5,5
aft
dia
me
ter
Sh
t
We
igh
ins
Be
arin
g
ing
Ho
us
G
*
UCF200CO(CC)
Sta
t
rat ic loa
ing d
UKF200H
UKF300H
ert
EXF200
EXF300
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
n
**
rat amic
ing loa
d
ESF200
USF200
d
[mm]
35
40
45
50
INDUSTRY
4/12/08
15:46
Page 41
Flanged unit
General
Housing
F200 relubricatable
F300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCF200
UCF300
d
L
J
A
162
162
162
162
175
185
185
193
175
175
175
175
187
193
193
208
187
187
200
208
208
236
193
193
208
226
226
250
200
200
220
236
236
260
130
130
130
130
143
140
140
150
143
143
143
143
149
150
150
166
149
149
159
166
166
184
152
152
165
178
178
196
159
159
175
184
184
204
43,0
43,0
43,0
43,0
48,0
52,0
52,0
56,0
48,0
48,0
48,0
48,0
50,0
56,0
56,0
58,0
50,0
50,0
56,0
58,0
58,0
66,0
54,0
54,0
57,0
61,0
61,0
68,0
56,0
56,0
63,0
66,0
66,0
74,0
A1
A2
e
N
s1
18 58,4
18 58,5
18 61,4
18 68,6
18 60,0
20 71,0
20 75,2
22 69,5
18 68,7
18 67,8
18 66,3
18 75,8
22 62,0
22 78,0
22 81,5
22 71,5
22 69,7
22 81,6
22 69,5
22 78,0
22 86,2
25 81,5
22 75,4
22 82,6
22 73,0
25 83,0
25 94,0
27 82,5
22 78,5
22 88,8
24 76,0
25 89,0
25 101,7
27 92,0
25
25
25
25
29
30
30
33
29
29
29
29
30
33
33
33
30
30
34
33
33
39
31
31
34
36
36
38
34
34
36
39
39
44
19
19
19
19
19
23
23
23
19
19
19
19
19
23
23
23
19
19
19
23
23
25
19
19
23
25
25
31
19
19
23
25
25
31
31,0
36,5
32,0
38,5
35,5
42,5
39,0
44,5
40,0
48,0
B
B1
s
D1
D2
[mm]
55
60
65
70
75
SNR Industry
76
UCF211
USF211
ESF211
EXF211
UKF212H
UCF311
EXF311
UKF312H
UCF212
USF212
ESF212
EXF212
UKF213H
UCF312
EXF312
UKF313H
UCF213
EXF213
UKF215H
UCF313
EXF313
UKF315H
UCF214
EXF214
UKF216H
UCF314
EXF314
UKF316H
UCF215
EXF215
UKF217H
UCF315
EXF315
UKF317H
55,6
45,3
48,4
71,3
62,0
66,0
73,0
62,0
65,1
53,7
49,3
77,7
65,0
71,0
79,4
65,0
65,1
85,7
73,0
75,0
85,7
73,0
74,6
85,7
78,0
78,0
92,1
78,0
77,8
92,1
82,0
82,0
- 100,0
82,0
-
22,2 69,0
11,8 69,0
12,0
76,2
27,7
76,2
80,0
25,0 74,9
27,8
83,0
80,0
25,4 74,9
14,9 74,9
12,0
84,2
30,9
84,2
85,0
26,0 81,0
31,0
89,0
85,0
25,4 82,0
34,1
86,0
98,0
30,0 87,5
32,5
97,0
98,0
30,2 86,5
34,1
96,8
- 105,0
33,0 94,0
34,2
- 102,0
- 105,0
33,3 91,5
37,3
- 102,0
- 110,0
32,0 100,5
37,3
- 113,0
- 110,0
4/12/08
15:46
Page 42
SNR Industry
77
62,8
62,8
***
***
73,2
73,2
73,2
***
***
74,3
74,3
***
-
Dz
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
F211
F211
F211
F211
F212
F311
F311
F312
F212
F212
F212
F212
F213
F312
F312
F313
F213
F213
F215
F313
F313
F315
F214
F214
F216
F314
F314
F316
F215
F215
F217
F315
F315
F317
UC211
US211
ES211
EX211
UK212 + H2312
UC311
EX311
UK312 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC312
EX312
UK313 + H2313
UC213
EX213
UK215 + H2315
UC313
EX313
UK315 + H2315
UC214
EX214
UK216 + H2316
UC314
EX314
UK316 + H2316
UC215
EX215
UK217 + H2317
UC315
EX315
UK317 + H2317
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
Cr
C0r
[kN]
[kN]
[kg]
43,55
43,55
43,55
43,55
52,50
71,50
71,50
81,60
52,50
52,50
52,50
52,50
57,20
81,60
81,60
93,86
57,20
57,20
66,00
93,86
93,86
113,36
62,00
62,00
72,50
104,26
104,26
122,85
66,00
66,00
83,20
113,36
113,36
132,60
29,20
29,20
29,20
29,20
32,80
44,80
44,80
51,80
32,80
32,80
32,80
32,80
40,00
51,80
51,80
60,50
40,00
40,00
49,50
60,50
60,50
76,80
45,00
45,00
54,20
68,00
68,00
86,50
49,50
49,50
63,80
76,80
76,80
96,50
3,4
3,3
3,1
3,6
4,4
5,2
5,6
6,3
4,4
4,2
4,1
4,8
5,6
6,4
6,7
7,9
5,6
6,1
6,4
7,9
8,3
11,1
6,3
6,8
7,4
9,5
10,0
13,0
5,8
6,5
9,2
10,4
11,4
15,7
Sh
t
*
We
igh
ins
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
Be
arin
g
ing
Ho
us
G
UCF200CO(CC)
aft
dia
me
ter
UKF200H
UKF300H
ert
EXF200
EXF300
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
n
**
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESF200
USF200
d
[mm]
55
60
65
70
75
INDUSTRY
4/12/08
15:46
Page 43
Flanged unit
General
Housing
F200 relubricatable
F300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCF200
UCF300
d
L
J
A
A1
A2
e
N
s1
208
208
235
250
250
280
220
220
260
260
290
235
235
280
280
310
290
290
310
310
340
310
340
370
410
370
450
410
450
165
165
187
196
196
216
175
175
204
204
228
187
187
216
216
242
228
228
242
242
266
242
266
290
320
290
350
320
350
57,0
57,0
68,0
68,0
68,0
76,0
63,0
63,0
74,0
74,0
94,0
68,0
68,0
76,0
76,0
94,0
94,0
94,0
94,0
94,0
96,0
94,0
96,0
110,0
115,0
110,0
125,0
115,0
125,0
22
22
25
27
27
30
24
24
27
27
30
25
25
30
30
32
30
30
32
32
35
32
35
40
45
40
55
45
55
83,3
91,9
82,0
90,0
103,9
92,0
87,6
83,6
100,0
111,5
111,0
96,3
86,5
100,0
116,3
113,0
121,0
134,5
125,0
137,6
121,0
127,0
131,0
130,0
134,0
140,0
148,0
146,0
161,0
34
34
40
38
38
44
36
36
44
44
59
40
40
44
44
59
59
59
59
59
60
59
60
65
65
65
75
65
75
23
23
23
31
31
35
23
23
31
31
35
23
23
35
35
38
35
35
38
38
41
38
41
41
41
41
41
41
41
42,0
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
B
B1
s
D1
D2
33,3
37,3
34,0
40,5
34,1
23,4
40,0
42,0
39,7
24,5
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
98,0
107,9
105,1
114,0
111,0
120,0
126,5
134,5
140,5
149,0
163,0
177,0
190,0
110,0
120,0
119,0
120,0
119,0
127,0
125,0
120,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
78
UCF216
EXF216
UKF218H
UCF316
EXF316
UKF318H
UCF217
EXF217
UCF317
EXF317
UKF319H
UCF218
EXF218
UCF318
EXF318
UKF320H
UCF319
EXF319
UCF320
EXF320
UKF322H
UCF321
UCF322
UKF324H
UKF326H
UCF324
UKF328H
UCF326
UCF328
82,6
95,2
86,0
86,0
- 106,4
86,0
85,7
73,2
96,0
- 109,5
90,0
96,0
72,5
96,0
- 115,9
97,0
- 103,0
- 122,3
- 108,0
- 128,6
105,0
- 112,0
- 117,0
112,0
121,0
- 126,0
131,0
- 135,0
- 145,0
4/12/08
15:46
Page 44
SNR Industry
79
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
-
Dz
-
F216
F216
F218
F316
F316
F318
F217
F217
F317
F317
F319
F218
F218
F318
F318
F320
F319
F319
F320
F320
F322
F321
F322
F324
F326
F324
F328
F326
F328
UC216
EX216
UK218 + H2318
UC316
EX316
UK318 + H2318
UC217
EX217
UC317
EX317
UK319 + H2319
UC218
EX218
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
-
-
Cr
C0r
[kN]
[kN]
[kg]
72,50
72,50
96,00
122,85
122,85
143,00
83,20
83,20
132,60
132,60
156,00
96,00
96,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
54,20
54,20
71,50
86,50
86,50
108,00
63,80
63,80
96,50
96,50
122,00
71,50
71,50
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
7,0
7,3
11,8
12,8
13,9
18,1
8,8
9,1
15,7
16,8
21,6
11,6
12,1
18,1
19,3
25,6
21,3
22,8
25,8
27,6
42,6
30,2
39,3
51,9
68,5
49,2
90,7
63,6
84,7
aft
dia
me
ter
t
*
We
igh
ins
Be
arin
g
ing
Ho
us
G
UCF200CO(CC)
Sh
UKF200H
UKF300H
ert
EXF200
EXF300
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
n
**
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESF200
USF200
d
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:46
Page 45
Flanged unit
General
Housing
FCE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFCE200
d
L
J
A
A1
A2
W
[mm]
12
15
17
20
25
30
35
40
SNR Industry
80
H3
e
N
s1
B
B1
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,5
2,5
2,5
2,5
2,0
2,0
2,0
2,0
2,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
2,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
9,0
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
14,0
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
h8
UCFCE201
USFCE201
ESFCE201
EXFCE201
UCFCE202
USFCE202
ESFCE202
EXFCE202
UCFCE203
USFCE203
ESFCE203
EXFCE203
UCFCE204
USFCE204
ESFCE204
EXFCE204
UKFCE205H
UCFCE205
USFCE205
ESFCE205
EXFCE205
UKFCE206H
UCFCE206
USFCE206
ESFCE206
EXFCE206
UKFCE207H
UCFCE207
USFCE207
ESFCE207
EXFCE207
UKFCE208H
UCFCE208
USFCE208
ESFCE208
EXFCE208
UKFCE209H
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
125
125
125
125
125
135
135
135
135
135
145
145
145
145
145
155
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
90
90
90
90
90
100
100
100
100
100
110
110
110
110
110
120
120
120
120
120
130
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
20,0
20,0
20,0
20,0
20,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
23,0
23,0
23,0
23,0
23,0
25,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
8,0
9,0
9,0
9,0
9,0
9,0
9,5
9,5
9,5
9,5
9,5
10,0
10,0
10,0
10,0
10,0
11,5
11,5
11,5
11,5
11,5
12,0
16,3
14,0
20,1
24,5
16,3
14,0
20,1
24,5
16,3
14,0
20,1
24,5
16,3
16,0
21,4
24,5
21,0
17,2
17,0
20,9
24,4
22,5
20,2
20,0
24,7
28,1
23,5
24,4
22,5
28,4
31,3
25,5
29,2
24,0
31,7
33,9
28,0
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
70
70
70
70
70
80
80
80
80
80
90
90
90
90
90
100
100
100
100
100
105
4/12/08
15:46
Page 46
SNR Industry
81
s
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
FCE204
FCE203
FCE203
FCE204
FCE204
FCE203
FCE203
FCE204
FCE204
FCE203
FCE203
FCE204
FCE204
FCE204
FCE204
FCE204
FCE205
FCE205
FCE205
FCE205
FCE205
FCE206
FCE206
FCE206
FCE206
FCE206
FCE207
FCE207
FCE207
FCE207
FCE207
FCE208
FCE208
FCE208
FCE208
FCE208
FCE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,6
0,5
0,5
0,7
0,6
0,5
0,5
0,6
0,6
0,5
0,5
0,6
0,5
0,5
0,5
0,6
0,8
0,8
0,8
0,8
0,8
1,0
1,0
0,9
1,0
1,1
1,3
1,2
1,2
1,3
1,4
1,7
1,6
1,6
1,7
1,8
2,0
Sh
We
igh
t
aft
dia
me
ter
UKFCE200H
Dy
n
rat amic
ing loa
d
ins
Be
arin
g
Ho
us
ing
ert
EXFCE200
Sta
t
rat ic loa
ing d
ESFCE200
USFCE200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:46
Page 47
Flanged unit
General
Housing
FCE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFCE200
d
L
J
A
A1
A2
W
[mm]
45
50
55
60
65
70
75
80
90
SNR Industry
82
H3
e
N
s1
B
B1
2,0
2,0
2,0
2,0
1,0
1,0
1,0
1,0
1,0
0,0
0,0
0,0
0,0
0,0
1,0
1,0
1,0
1,0
1,0
0,0
0,0
0,0
0,0
0,0
0,0
-2,0
0,0
0,0
-2,0
-2,0
-4,0
-4,0
-4,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
23,0
23,0
23,0
27,5
29,0
31,0
32,0
35,5
39,0
42,0
-
55,0
59,0
62,0
65,0
73,0
78,0
86,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
74,6
85,7
77,8
92,1
82,6
95,2
96,0
72,5
h8
UCFCE209
USFCE209
ESFCE209
EXFCE209
UKFCE210H
UCFCE210
USFCE210
ESFCE210
EXFCE210
UKFCE211H
UCFCE211
USFCE211
ESFCE211
EXFCE211
UKFCE212H
UCFCE212
USFCE212
ESFCE212
EXFCE212
UKFCE213H
UCFCE213
EXFCE213
UKFCE215H
UCFCE214
EXFCE214
UKFCE216H
UCFCE215
EXFCE215
UCFCE216
EXFCE216
UKFCE218H
UCFCE218
EXFCE218
155
155
155
155
165
165
165
165
165
185
185
185
185
185
195
195
195
195
195
215
215
215
215
215
215
220
220
220
220
220
265
265
265
130
130
130
130
135
135
135
135
135
150
150
150
150
150
160
160
160
160
160
177
177
177
177
177
177
184
184
184
184
184
220
220
220
25,0
25,0
25,0
25,0
25,5
25,5
25,5
25,5
25,5
27,5
27,5
27,5
27,5
27,5
30,5
30,5
30,5
30,5
30,5
33,0
33,0
33,0
33,0
33,0
33,0
33,0
33,0
33,0
33,0
33,0
37,0
37,0
37,0
12,0
12,0
12,0
12,0
13,0
13,0
13,0
13,0
13,0
15,0
15,0
15,0
15,0
15,0
16,0
16,0
16,0
16,0
16,0
18,0
18,0
18,0
18,0
18,0
18,0
18,5
18,0
18,0
18,5
18,5
22,5
22,5
22,5
28,2
29,0
30,7
32,9
28,5
31,6
31,6
31,7
37,1
29,0
33,4
33,5
36,4
43,6
32,0
38,7
37,8
36,3
45,8
32,0
39,7
51,6
35,5
44,4
51,6
37,0
44,5
54,8
51,3
59,9
38,0
60,3
50,5
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
6
6
6
6
6
6
6
6
6
6
6
3
3
3
105
105
105
105
110
110
110
110
110
125
125
125
125
125
135
135
135
135
135
150
150
150
150
150
150
160
160
160
160
160
190
190
190
4/12/08
15:46
Page 48
SNR Industry
83
s
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
25,4
34,1
30,2
34,1
33,3
37,3
33,3
37,3
39,7
24,5
D1
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
82,0
86,5
91,5
98,0
111,0
-
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
98,0
96,8
105,0
102,0
110,0
120,0
120,0
G
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M8x1
M8x1
M6x1
M6x1
M6x1
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FCE209
FCE209
FCE209
FCE209
FCE210
FCE210
FCE210
FCE210
FCE210
FCE211
FCE211
FCE211
FCE211
FCE211
FCE212
FCE212
FCE212
FCE212
FCE212
FCE213
FCE213
FCE213
FCE215
FCE214
FCE214
FCE216
FCE215
FCE215
FCE216
FCE216
FCE218
FCE218
FCE218
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
UK215 + H2315
UC214
EX214
UK216 + H2316
UC215
EX215
UC216
EX216
UK218 + H2318
UC218
EX218
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
66,00
62,00
62,00
72,50
66,00
66,00
72,50
72,50
96,00
96,00
96,00
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
49,50
45,00
45,00
54,20
49,50
49,50
54,20
54,20
71,50
71,50
71,50
1,9
1,8
1,9
2,1
2,4
2,2
2,2
2,2
2,4
3,2
3,1
3,1
2,9
3,4
3,9
3,9
3,7
3,6
4,2
5,0
4,9
5,5
5,8
5,1
5,6
6,1
5,5
6,1
5,6
5,9
9,8
9,6
10,0
aft
dia
me
ter
Sh
We
igh
t
UKFCE200H
Dy
n
rat amic
ing loa
d
Be
arin
g
ing
ins
ert
EXFCE200
Sta
t
rat ic loa
ing d
ESFCE200
USFCE200
Ho
us
d
[mm]
45
50
55
60
65
70
75
80
90
INDUSTRY
4/12/08
15:46
Page 49
Flanged unit
General
Housing
FC200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFC200
d
L
J
A
A1
A2
A4
[mm]
12
15
17
20
25
30
35
40
SNR Industry
84
H3
e
N
s1
B
B1
s
D1
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
10
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
16
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
h8
UCFC201
USFC201
ESFC201
EXFC201
UCFC202
USFC202
ESFC202
EXFC202
UCFC203
USFC203
ESFC203
EXFC203
UCFC204
USFC204
ESFC204
EXFC204
UKFC205H
UCFC205
USFC205
ESFC205
EXFC205
UKFC206H
UCFC206
USFC206
ESFC206
EXFC206
UKFC207H
UCFC207
USFC207
ESFC207
EXFC207
UKFC208H
UCFC208
USFC208
ESFC208
EXFC208
UKFC209H
100
90
90
100
100
90
90
100
100
90
90
100
100
100
100
100
115
115
115
115
115
125
125
125
125
125
135
135
135
135
135
145
145
145
145
145
160
78
70
70
78
78
70
70
78
78
70
70
78
78
78
78
78
90
90
90
90
90
100
100
100
100
100
110
110
110
110
110
120
120
120
120
120
132
25,5
23,0
23,0
25,5
25,5
23,0
23,0
25,5
25,5
23,0
23,0
25,5
25,5
25,5
25,5
25,5
27,0
27,0
27,0
27,0
27,0
31,0
31,0
31,0
31,0
31,0
34,0
34,0
34,0
34,0
34,0
36,0
36,0
36,0
36,0
36,0
38,0
6
5
5
6
6
5
5
6
6
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
10
28,3
26,0
32,1
36,5
28,3
26,0
32,1
36,5
28,3
26,0
32,1
36,5
28,3
28,0
33,4
36,5
28,5
29,7
29,5
33,4
36,9
30,5
32,2
32,0
36,7
40,1
33,5
36,4
34,5
40,4
43,3
35,5
41,2
36,0
43,7
45,9
36,0
20,5
19,0
19,0
20,5
20,5
19,0
19,0
20,5
20,5
19,0
19,0
20,5
20,5
20,5
20,5
20,5
21,0
21,0
21,0
21,0
21,0
23,0
23,0
23,0
23,0
23,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
26,0
62
55
55
62
62
55
55
62
62
55
55
62
62
62
62
62
70
70
70
70
70
80
80
80
80
80
90
90
90
90
90
100
100
100
100
100
105
4/12/08
15:47
Page 50
SNR Industry
85
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
36,5
34,0
***
***
36,5
34,0
***
***
36,5
34,0
***
***
36,5
36,5
***
***
39,1
39,1
39,1
***
***
44,1
44,1
44,1
***
***
48,8
48,8
48,8
***
***
55,1
55,1
55,1
***
***
56,7
FC204
FC203
FC203
FC204
FC204
FC203
FC203
FC204
FC204
FC203
FC203
FC204
FC204
FC204
FC204
FC204
FC205
FC205
FC205
FC205
FC205
FC206
FC206
FC206
FC206
FC206
FC207
FC207
FC207
FC207
FC207
FC208
FC208
FC208
FC208
FC208
FC209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
aft
dia
me
ter
t
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
UCFC200CO(CC)
Sh
UKFC200H
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXFC200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFC200
USFC200
d
[kg] [mm]
0,7
0,5
0,5
0,8
0,7
0,5
0,5
0,7
0,6
0,5
0,5
0,7
0,6
0,6
0,6
0,7
1,0
1,0
0,9
0,9
1,0
1,3
1,3
1,2
1,3
1,4
1,7
1,7
1,6
1,7
1,8
2,1
2,0
2,0
2,0
2,2
2,6
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:47
Page 51
Flanged unit
General
Housing
FC200 relubricatable
Sh
aft
dia
me
ter
Un
it
UCFC200
d
L
J
A
A1
A2
A4
[mm]
45
50
55
60
65
70
75
80
85
90
SNR Industry
86
H3
e
N
s1
B
B1
10
10
10
10
10
10
10
10
10
13
13
13
13
13
17
17
17
17
17
16
16
16
18
17
17
18
18
18
18
18
18
22
18
18
22
22
16
16
16
16
16
16
16
16
16
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
23
19
19
23
23
23
23
23
23
23
23
27,5
29,0
31,0
32,0
35,5
39,0
40,0
42,0
-
55,0
59,0
62,0
65,0
73,0
78,0
82,0
86,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
74,6
85,7
77,8
92,1
82,6
95,2
85,7
73,2
96,0
72,5
s
D1
h8
UCFC209
USFC209
ESFC209
EXFC209
UKFC210H
UCFC210
USFC210
ESFC210
EXFC210
UKFC211H
UCFC211
USFC211
ESFC211
EXFC211
UKFC212H
UCFC212
USFC212
ESFC212
EXFC212
UKFC213H
UCFC213
EXFC213
UKFC215H
UCFC214
EXFC214
UKFC216H
UCFC215
EXFC215
UKFC217H
UCFC216
EXFC216
UKFC218H
UCFC217
EXFC217
UCFC218
EXFC218
160
160
160
160
165
165
165
165
165
185
185
185
185
185
195
195
195
195
195
205
205
205
220
215
215
240
220
220
250
240
240
265
250
250
265
265
132
132
132
132
138
138
138
138
138
150
150
150
150
150
160
160
160
160
160
170
170
170
184
177
177
200
184
184
208
200
200
220
208
208
220
220
38,0
38,0
38,0
38,0
40,0
40,0
40,0
40,0
40,0
42,0
42,0
42,0
42,0
42,0
48,0
48,0
48,0
48,0
48,0
49,0
49,0
49,0
55,0
52,0
52,0
58,0
55,0
55,0
63,0
58,0
58,0
68,0
63,0
63,0
68,0
68,0
10
10
10
10
14
14
14
14
14
13
13
13
13
13
15
15
15
15
15
15
15
15
17
16
16
18
17
17
20
18
18
20
20
20
20
20
40,2
41,0
42,7
44,9
37,5
42,6
42,6
42,7
48,1
42,0
46,4
46,5
49,4
56,6
48,0
56,7
55,8
54,3
63,8
48,0
55,7
67,6
53,5
61,4
68,6
57,0
62,5
72,8
58,0
67,3
75,9
64,0
69,6
65,6
78,3
68,5
26,0
26,0
26,0
26,0
28,0
28,0
28,0
28,0
28,0
30,0
30,0
30,0
30,0
30,0
36,0
36,0
36,0
36,0
36,0
35,0
35,0
35,0
39,0
38,0
38,0
42,0
39,0
39,0
45,0
42,0
42,0
50,0
45,0
45,0
50,0
50,0
105
105
105
105
110
110
110
110
110
125
125
125
125
125
135
135
135
135
135
145
145
145
160
150
150
170
160
160
180
170
170
190
180
180
190
190
19,0 57,2
10,2 57,2
11,0
21,4
19,0 61,8
10,9 61,8
11,0
24,6
22,2 69,0
11,8 69,0
12,0
27,7
25,4 74,9
14,9 74,9
12,0
30,9
25,4 82,0
34,1
30,2 86,5
34,1
33,3 91,5
37,3
33,3 98,0
37,3
34,1 105,1
23,4
39,7 111,0
24,5
-
4/12/08
15:47
Page 52
SNR Industry
87
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
98,0
96,8
105,0
102,0
110,0
110,0
120,0
119,0
120,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
56,7
56,7
***
***
59,3
59,3
59,3
***
***
62,8
62,8
62,8
***
***
73,2
73,2
73,2
***
***
74,5
74,5
***
-
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
FC209
FC209
FC209
FC209
FC210
FC210
FC210
FC210
FC210
FC211
FC211
FC211
FC211
FC211
FC212
FC212
FC212
FC212
FC212
FC213
FC213
FC213
FC215
FC214
FC214
FC216
FC215
FC215
FC217
FC216
FC216
FC218
FC217
FC217
FC218
FC218
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
UK215 + H2315
UC214
EX214
UK216 + H2316
UC215
EX215
UK217 + H2317
UC216
EX216
UK218 + H2318
UC217
EX217
UC218
EX218
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
66,00
62,00
62,00
72,50
66,00
66,00
83,20
72,50
72,50
96,00
83,20
83,20
96,00
96,00
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
49,50
45,00
45,00
54,20
49,50
49,50
63,80
54,20
54,20
71,50
63,80
63,80
71,50
71,50
2,5
2,4
2,5
2,7
3,0
2,9
2,8
2,9
3,1
3,9
3,9
3,8
3,6
4,1
4,9
5,0
4,7
4,6
5,3
5,6
5,5
6,1
6,4
6,4
6,9
9,5
7,2
7,8
11,1
9,0
9,4
13,4
10,6
11,0
13,2
13,6
Sh
t
*
We
igh
ins
Be
arin
g
ing
Ho
us
D2
UCFC200CO(CC)
aft
dia
me
ter
UKFC200H
ert
EXFC200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
n
**
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESFC200
USFC200
d
[mm]
45
50
55
60
65
70
75
80
85
90
INDUSTRY
4/12/08
15:47
Page 53
Flanged unit
General
FEE200 relubricatable
Un
it
Sh
aft
dia
me
ter
Housing
d
L
J
A
A1
A2
A4
[mm]
25
30
35
40
45
50
60
SNR Industry
88
H3
e
N
B1
9,5
9,5
10,5
10,5
9,0
9,0
11,5
11,5
11,5
11,5
12,5
12,5
17,0
17,0
9,0
9,0
9,0
9,0
11,5
11,5
11,5
11,5
14,0
14,0
14,0
14,0
14,0
14,0
27,0
30,9
30,0
35,7
32,0
38,9
34,0
43,7
41,2
43,7
43,5
43,7
53,7
49,3
h8
USFEE205
ESFEE205
USFEE206
ESFEE206
USFEE207
ESFEE207
USFEE208
ESFEE208
USFEE209
ESFEE209
USFEE210
ESFEE210
USFEE212
ESFEE212
115
115
127
127
135
135
145
145
155
155
165
165
195
195
92
92
105
105
110
110
120
120
130
130
136
136
165
165
23,5
23,5
27,0
27,0
28,0
28,0
31,0
31,0
31,5
31,5
32,5
32,5
40,5
40,5
9,0
9,0
9,5
9,5
10,0
10,0
11,5
11,5
12,0
12,0
13,0
13,0
16,0
16,0
29,0
32,9
32,5
37,2
32,5
38,4
36,5
44,2
42,5
44,2
45,1
45,2
55,8
54,3
20,5
20,5
24,0
24,0
24,0
24,0
27,0
27,0
27,5
27,5
28,5
28,5
36,5
36,5
75
75
85
85
90
90
100
100
105
105
115
115
140
140
4/12/08
15:47
Page 54
SNR Industry
89
USFEE200
s
7,5
7,5
8,0
9,0
8,5
9,5
9,0
11,0
10,2
11,0
10,9
11,0
14,9
12,0
D1
34,0
40,3
48,0
53,0
57,2
61,8
74,9
-
D2
38,1
44,5
55,6
60,3
63,5
69,9
84,2
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FEE205
FEE205
FEE206
FEE206
FEE207
FEE207
FEE208
FEE208
FEE209
FEE209
FEE210
FEE210
FEE212
FEE212
US205
ES205
US206
ES206
US207
ES207
US208
ES208
US209
ES209
US210
ES210
US212
ES212
Cr
C0r
[kN]
[kN]
[kg]
14,00
14,00
19,50
19,50
25,70
25,70
29,60
29,60
31,85
31,85
35,10
35,10
52,50
52,50
7,88
7,88
11,20
11,20
15,20
15,20
18,20
18,20
20,80
20,80
23,20
23,20
32,80
32,80
0,8
0,8
1,1
1,2
1,4
1,5
1,8
1,9
2,1
2,1
2,5
2,5
4,3
4,2
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
Dy
n
rat amic
ing loa
d
ins
Be
arin
g
ing
ert
ESFEE200
Ho
us
d
[mm]
25
30
35
40
45
50
60
INDUSTRY
4/12/08
15:47
Page 55
Flanged unit
General
Housing
FS300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFS300
d
L
J
A
A1
A2
A4
[mm]
20
25
30
35
40
45
50
55
60
65
70
75
SNR Industry
90
H3
e
N
s1
9
9
9
10
10
10
11
11
11
13
13
13
14
14
14
16
16
16
17
17
17
19
19
19
15
15
15
21
18
18
18
21
21
24
16
16
16
16
16
16
19
19
19
19
19
19
19
19
19
23
23
23
23
23
23
23
23
23
23
23
23
25
25
25
31
25
25
31
21,5
23,0
25,5
27,5
30,0
32,0
34,0
36,5
38,5
42,5
44,5
48,0
B
B1
s
h8
UKFS305H
UCFS305
EXFS305
UKFS306H
UCFS306
EXFS306
UKFS307H
UCFS307
EXFS307
UKFS308H
UCFS308
EXFS308
UKFS309H
UCFS309
EXFS309
UKFS310H
UCFS310
EXFS310
UKFS311H
UCFS311
EXFS311
UKFS312H
UCFS312
EXFS312
UKFS313H
UCFS313
EXFS313
UKFS315H
UCFS314
EXFS314
UKFS316H
UCFS315
EXFS315
UKFS317H
110
110
110
125
125
125
135
135
135
150
150
150
160
160
160
175
175
175
185
185
185
195
195
195
208
208
208
236
226
226
250
236
236
260
80
80
80
95
95
95
100
100
100
112
112
112
125
125
125
132
132
132
140
140
140
150
150
150
166
166
166
184
178
178
196
184
184
204
29
29
29
32
32
32
36
36
36
40
40
40
44
44
44
48
48
48
52
52
52
56
56
56
58
58
58
66
61
61
68
66
66
74
13
13
13
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
20
20
20
22
22
22
22
22
22
25
25
25
27
25
25
27
30,5
32,0
39,1
33,0
36,0
42,5
36,5
40,0
44,3
40,5
46,0
50,3
44,0
49,0
52,9
48,0
55,0
58,0
51,0
58,0
62,2
55,5
64,0
67,4
53,5
60,0
68,2
63,5
65,0
75,9
62,5
71,0
83,7
72,0
22
22
22
24
24
24
27
27
27
30
30
30
33
33
33
36
36
36
39
39
39
42
42
42
40
40
40
48
43
43
48
48
48
54
80
80
80
90
90
90
100
100
100
115
115
115
125
125
125
140
140
140
150
150
150
160
160
160
175
175
175
200
185
185
210
200
200
220
35,0
38,0
46,8
38,0
43,0
50,0
43,0
48,0
51,6
46,0
52,0
57,1
50,0
57,0
58,7
55,0
61,0
66,6
59,0
66,0
73,0
62,0
71,0
79,4
65,0
75,0
85,7
73,0
78,0
92,1
78,0
82,0
- 100,0
82,0
-
15,0
16,7
17,0
17,5
19,0
18,3
19,0
19,8
22,0
19,8
22,0
24,6
25,0
27,8
26,0
30,95
30,0
32,5
33,0
34,15
32,0
37,3
-
4/12/08
15:47
Page 56
SNR Industry
91
38,0
42,8
45,0
50,0
52,0
55,0
58,0
63,5
65,0
70,0
70,0
76,2
75,0
83,0
80,0
89,0
85,0
97,0
98,0
102,0
105,0
113,0
110,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
FS305
FS305
FS305
FS306
FS306
FS306
FS307
FS307
FS307
FS308
FS308
FS308
FS309
FS309
FS309
FS310
FS310
FS310
FS311
FS311
FS311
FS312
FS312
FS312
FS313
FS313
FS313
FS315
FS314
FS314
FS316
FS315
FS315
FS317
UK305 + H2305
UC305
EX305
UK306 + H2306
UC306
EX306
UK307 + H2307
UC307
EX307
UK308 + H2308
UC308
EX308
UK309 + H2309
UC309
EX309
UK310 + H2310
UC310
EX310
UK311 + H2311
UC311
EX311
UK312 + H2312
UC312
EX312
UK313 + H2313
UC313
EX313
UK315 + H2315
UC314
EX314
UK316 + H2316
UC315
EX315
UK317 + H2317
Cr
C0r
[kN]
[kN]
[kg]
22,36
22,36
22,36
27,00
27,00
27,00
33,50
33,50
33,50
40,56
40,56
40,56
53,00
53,00
53,00
62,00
62,00
62,00
71,50
71,50
71,50
81,60
81,60
81,60
93,86
93,86
93,86
113,36
104,26
104,26
122,85
113,36
113,36
132,60
11,50
11,50
11,50
15,20
15,20
15,20
19,20
19,20
19,20
24,00
24,00
24,00
31,80
31,80
31,80
37,80
37,80
37,80
44,80
44,80
44,80
51,80
51,80
51,80
60,50
60,50
60,50
76,80
68,00
68,00
86,50
76,80
76,80
96,50
1,4
1,2
1,3
1,8
1,8
1,9
2,5
2,3
2,4
3,2
3,1
3,2
4,0
3,9
4,0
5,0
4,9
5,1
6,0
5,7
6,1
7,4
7,5
7,8
8,8
8,8
9,2
13,1
11,0
11,5
15,1
12,4
13,5
17,3
Sh
t
We
igh
Sta
t
rat ic loa
ing d
Dy
n
rat amic
ing loa
d
ins
ert
35,4
35,4
44,6
48,9
56,5
61,8
68,7
74,9
81,0
87,5
94,0
100,5
-
D2
Be
arin
g
ing
Ho
us
D1
aft
dia
me
ter
UKFS300H
EXFS300
d
[mm]
20
25
30
35
40
45
50
55
60
65
70
75
INDUSTRY
4/12/08
15:47
Page 57
Flanged unit
General
Housing
FS300 relubricatable
Sh
aft
dia
me
ter
Un
it
UCFS300
d
L
J
A
A1
A2
A4
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
92
H3
e
N
s1
B
18
18
24
24
24
39
24
24
39
39
39
39
39
35
39
35
35
35
35
45
35
45
31
31
35
31
31
35
35
35
38
35
35
38
38
41
38
41
41
41
41
41
41
41
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
86,0
90,0
97,0
105,0
112,0
121,0
131,0
-
B1
s
h8
UCFS316
EXFS316
UKFS318H
UCFS317
EXFS317
UKFS319H
UCFS318
EXFS318
UKFS320H
UCFS319
EXFS319
UCFS320
EXFS320
UKFS322H
UCFS321
UCFS322
UKFS324H
UKFS326H
UCFS324
UKFS328H
UCFS326
UCFS328
250
250
280
260
260
290
280
280
310
290
290
310
310
340
310
340
370
410
370
450
410
450
196
196
216
204
204
228
216
216
242
228
228
242
242
266
242
266
290
320
290
350
320
350
68
68
76
74
74
94
76
76
94
94
94
94
94
96
94
96
110
115
110
125
115
125
27
27
30
27
27
30
30
30
32
30
30
32
32
35
32
35
40
45
40
55
45
55
70,0
83,9
72,0
80,0
91,5
91,0
80,0
96,3
93,0
101,0
114,5
105,0
117,6
96,0
107,0
106,0
100,0
104,0
110,0
118,0
116,0
131,0
48
48
56
54
54
74
56
56
74
74
74
74
74
71
74
71
80
85
80
95
85
95
210
210
240
220
220
250
240
240
260
250
250
260
260
300
260
300
330
360
330
400
360
400
86,0
106,4
96,0
109,5
96,0
115,9
103,0
122,3
108,0
128,6
112,0
117,0
126,0
135,0
145,0
34,0
40,5
40,0
42,0
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
4/12/08
15:47
Page 58
SNR Industry
93
119,0
120,0
127,0
125,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
G
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
FS316
FS316
FS318
FS317
FS317
FS319
FS318
FS318
FS320
FS319
FS319
FS320
FS320
FS322
FS321
FS322
FS324
FS326
FS324
FS328
FS326
FS328
UC316
EX316
UK318 + H2318
UC317
EX317
UK319 + H2319
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
Cr
C0r
[kN]
[kN]
[kg]
122,85
122,85
143,00
132,60
132,60
156,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
86,50
86,50
108,00
96,50
96,50
122,00
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
14,9
16,0
21,3
17,3
18,4
25,2
21,2
22,4
29,1
24,9
26,4
29,4
31,2
41,6
29,8
38,3
54,4
72,8
51,7
98,7
67,9
92,8
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
ins
107,9
114,0
120,0
134,5
126,5
134,5
140,5
149,0
176,1
163,0
177,0
190,0
D2
Be
arin
g
ing
Ho
us
D1
Dy
n
rat amic
ing loa
d
UKFS300H
ert
EXFS300
d
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:47
Page 59
Flanged unit
General
FTE200 relubricatable
Sh
aft
dia
me
ter
Un
it
Housing
d
H
J
A
A1
A2
H2
e
N
31
31
31
31
31
31
35
35
36
36
44
44
48
48
51
51
55
55
55
55
76,1
76,1
76,1
76,1
76,1
76,1
89,5
89,5
96,0
96,0
116,0
116,0
129,7
129,7
140,0
140,0
160,0
160,0
160,0
160,0
20
20
20
20
20
20
20
20
22
22
24
24
27
27
30
30
33
33
33
33
11
11
11
11
11
11
11
11
12
12
12
12
16
16
16
16
16
16
16
16
26,0
32,1
26,0
32,1
26,0
32,1
29,0
34,4
32,1
36,0
35,0
39,7
39,1
45,0
43,8
51,5
50,2
51,9
51,8
51,9
81
81
81
81
81
81
92
92
97
97
117
117
128
128
137
137
150
150
150
150
10,0
10,0
10,0
10,0
10,0
10,0
11,0
11,0
12,6
12,6
13,0
13,0
15,6
15,6
18,8
18,8
19,2
19,2
19,2
19,2
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,0
11,0
11,0
11,0
13,5
13,5
13,5
13,5
14,0
14,0
14,0
14,0
[mm]
12
15
17
20
25
30
35
40
45
50
SNR Industry
94
USFTE201
ESFTE201
USFTE202
ESFTE202
USFTE203
ESFTE203
USFTE204
ESFTE204
USFTE205
ESFTE205
USFTE206
ESFTE206
USFTE207
ESFTE207
USFTE208
ESFTE208
USFTE209
ESFTE209
USFTE210
ESFTE210
4/12/08
15:47
Page 60
SNR Industry
95
22,0
28,6
22,0
28,6
22,0
28,6
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
34,0
43,7
41,2
43,7
43,5
43,7
s
6,0
6,5
6,0
6,5
6,0
6,5
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
9,0
11,0
10,2
11,0
10,9
11,0
D1
24,6
24,6
24,6
29,0
34,0
40,3
48,0
53,0
57,2
61,8
-
D2
28,6
28,6
28,6
33,3
38,1
44,5
55,6
60,3
63,5
69,9
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FTE202
FTE202
FTE202
FTE202
FTE202
FTE202
FTE204
FTE204
FTE205
FTE205
FTE206
FTE206
FTE207
FTE207
FTE208
FTE208
FTE209
FTE209
FTE210
FTE210
US201
ES201
US202
ES202
US203
ES203
US204
ES204
US205
ES205
US206
ES206
US207
ES207
US208
ES208
US209
ES209
US210
ES210
Cr
C0r
[kN]
[kN]
9,55
9,55
9,55
9,55
9,55
9,55
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
29,60
29,60
31,85
31,85
35,10
35,10
4,78
4,78
4,78
4,78
4,78
4,78
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
18,20
18,20
20,80
20,80
23,20
23,20
aft
dia
me
ter
Sh
t
We
igh
Be
arin
g
ing
Ho
us
B1
Sta
t
rat ic loa
ing d
ert
Dy
n
rat amic
ing loa
d
ESFTE200
ins
USFTE200
d
[kg] [mm]
0,4
0,4
0,4
0,4
0,4
0,4
0,6
0,6
0,6
0,6
1,0
1,1
1,4
1,5
1,7
1,7
2,1
2,1
2,0
2,1
12
15
17
20
25
30
35
40
45
50
INDUSTRY
4/12/08
15:47
Page 61
Flanged unit
General
Housing
FLE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFLE200
d
L
H
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
30,3
26,0
26,0
30,3
30,3
26,0
26,0
30,3
30,3
26,0
26,0
30,3
30,3
30,3
30,3
30,3
29,3
29,3
29,3
29,3
29,3
32,1
32,1
32,1
32,1
32,1
33,7
33,7
33,7
33,7
33,7
37,5
37,5
37,5
37,5
37,5
37,5
10,0
9,5
9,5
10,0
10,0
9,5
9,5
10,0
10,0
9,5
9,5
10,0
10,0
10,0
10,0
10,0
11,0
11,0
11,0
11,0
11,0
12,0
12,0
12,0
12,0
12,0
12,5
12,5
12,5
12,5
12,5
13,0
13,0
13,0
13,0
13,0
13,0
37,3
33,0
33,0
37,3
37,3
33,0
33,0
37,3
37,3
33,0
33,0
37,3
37,3
37,0
42,4
45,5
37,5
38,7
38,5
42,4
45,9
40,5
42,2
42,0
46,7
50,1
43,5
46,4
44,5
50,4
53,3
48,5
54,2
49,0
56,7
58,9
50,0
19
17
17
19
19
17
17
19
19
17
17
19
19
19
19
19
19
19
19
19
19
20
20
20
20
20
21
21
21
21
21
24
24
24
24
24
24
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
[mm]
12
15
17
20
25
30
35
40
SNR Industry
96
UCFLE201
USFLE201
ESFLE201
EXFLE201
UCFLE202
USFLE202
ESFLE202
EXFLE202
UCFLE203
USFLE203
ESFLE203
EXFLE203
UCFLE204
USFLE204
ESFLE204
EXFLE204
UKFLE205H
UCFLE205
USFLE205
ESFLE205
EXFLE205
UKFLE206H
UCFLE206
USFLE206
ESFLE206
EXFLE206
UKFLE207H
UCFLE207
USFLE207
ESFLE207
EXFLE207
UKFLE208H
UCFLE208
USFLE208
ESFLE208
EXFLE208
UKFLE209H
61
57
57
61
61
57
57
61
61
57
57
61
61
61
61
61
70
70
70
70
70
80
80
80
80
80
92
92
92
92
92
105
105
105
105
105
111
112
99
99
112
112
99
99
112
112
99
99
112
112
112
112
112
124
124
124
124
124
142
142
142
142
142
155
155
155
155
155
172
172
172
172
172
180
90,0
76,5
76,5
90,0
90,0
76,5
76,5
90,0
90,0
76,5
76,5
90,0
90,0
90,0
90,0
90,0
99,0
99,0
99,0
99,0
99,0
116,5
116,5
116,5
116,5
116,5
130,0
130,0
130,0
130,0
130,0
143,5
143,5
143,5
143,5
143,5
148,5
4/12/08
15:47
Page 62
SNR Industry
97
EXFLE200
UKFLE200H
41,8
41,8
***
***
41,8
41,8
***
***
41,8
41,8
***
***
41,8
41,8
***
***
43,9
43,9
43,9
***
***
46,9
46,9
46,9
***
***
50,2
50,2
50,2
***
***
57,9
57,9
57,9
***
***
58,4
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
FLE204
FLE203
FLE203
FLE204
FLE204
FLE203
FLE203
FLE204
FLE204
FLE203
FLE203
FLE204
FLE204
FLE204
FLE204
FLE204
FLE205
FLE205
FLE205
FLE205
FLE205
FLE206
FLE206
FLE206
FLE206
FLE206
FLE207
FLE207
FLE207
FLE207
FLE207
FLE208
FLE208
FLE208
FLE208
FLE208
FLE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
Sh
t
aft
dia
me
ter
*
We
igh
ins
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
Be
arin
g
ing
Ho
us
G
UCFLE200CO(CC)
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFLE200
ert
USFLE200
d
[kg] [mm]
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,4
0,5
0,5
0,6
0,6
0,6
0,6
0,7
0,9
0,8
0,8
0,9
0,9
1,2
1,1
1,1
1,2
1,3
1,7
1,6
1,6
1,6
1,8
1,9
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:47
Page 63
Flanged unit
General
Housing
FLE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFLE200
d
L
H
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
111
111
111
111
116
116
116
116
116
134
134
134
134
134
138
138
138
138
138
160
160
160
160
160
160
160
160
180
180
180
180
190
190
190
190
190
222
222
222
222
222
238
238
238
238
238
258
258
258
258
258
258
258
258
148,5
148,5
148,5
148,5
157,0
157,0
157,0
157,0
157,0
184,0
184,0
184,0
184,0
184,0
202,0
202,0
202,0
202,0
202,0
216,0
216,0
216,0
216,0
216,0
216,0
216,0
216,0
37,5
37,5
37,5
37,5
41,6
41,6
41,6
41,6
41,6
45,8
45,8
45,8
45,8
45,8
50,4
50,4
50,4
50,4
50,4
57,0
57,0
57,0
57,0
57,0
57,0
57,0
57,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
15,0
15,0
15,0
15,0
15,0
16,0
16,0
16,0
16,0
16,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
54,2
55,0
56,7
58,9
55,5
60,6
60,6
60,7
66,1
60,0
64,4
64,5
67,4
74,6
65,0
73,7
72,8
71,3
80,8
70,0
77,7
89,6
73,5
82,4
89,6
82,5
92,8
24
24
24
24
28
28
28
28
28
31
31
31
31
31
34
34
34
34
34
38
38
38
38
38
38
38
38
14,0
14,0
14,0
14,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
18,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
21,0
27,5
29,0
31,0
32,0
35,5
-
55,0
59,0
62,0
65,0
73,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
74,6
85,7
77,8
92,1
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
25,4
34,1
30,2
34,1
33,3
37,3
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
82,0
86,5
91,5
-
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
98,0
96,8
102,0
[mm]
45
50
55
60
65
70
75
SNR Industry
98
UCFLE209
USFLE209
ESFLE209
EXFLE209
UKFLE210H
UCFLE210
USFLE210
ESFLE210
EXFLE210
UKFLE211H
UCFLE211
USFLE211
ESFLE211
EXFLE211
UKFLE212H
UCFLE212
USFLE212
ESFLE212
EXFLE212
UKFLE213H
UCFLE213
EXFLE213
UKFLE215H
UCFLE214
EXFLE214
UCFLE215
EXFLE215
4/12/08
15:47
Page 64
SNR Industry
99
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
Z
58,4
58,4
***
***
65,8
65,8
65,8
***
***
69,1
69,1
69,1
***
***
82,4
82,4
82,4
***
***
82,9
82,9
***
-
UKFLE200H
FLE209
FLE209
FLE209
FLE209
FLE210
FLE210
FLE210
FLE210
FLE210
FLE211
FLE211
FLE211
FLE211
FLE211
FLE212
FLE212
FLE212
FLE212
FLE212
FLE213
FLE213
FLE213
FLE215
FLE214
FLE214
FLE215
FLE215
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
UK215 + H2315
UC214
EX214
UC215
EX215
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
C0r
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
66,00
62,00
62,00
66,00
66,00
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
49,50
45,00
45,00
49,50
49,50
1,8
1,8
1,8
2,0
2,3
2,1
2,1
2,1
2,3
3,5
3,4
3,4
3,2
3,7
3,7
3,7
3,5
3,4
4,0
4,1
4,0
4,6
4,9
5,4
5,9
5,2
5,8
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
UCFLE200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXFLE200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFLE200
USFLE200
d
[mm]
45
50
55
60
65
70
75
INDUSTRY
4/12/08
15:47
Page 65
Flanged unit
General
Housing
FL200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFL200
UCFL300
d
L
H
60
57
57
60
60
57
57
60
60
57
57
60
60
60
60
60
68
80
68
68
68
68
80
80
80
90
80
80
80
80
90
90
90
100
113
99
99
113
113
99
99
113
113
99
99
113
113
113
113
113
130
150
130
130
130
130
148
150
150
180
148
148
148
148
161
180
180
185
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
25,5
27,0
29,0
27,0
27,0
27,0
27,0
31,0
29,0
29,0
32,0
31,0
31,0
31,0
31,0
34,0
32,0
32,0
36,0
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
15
13
13
13
13
14
15
15
16
33,3
31,0
37,1
41,5
33,3
31,0
37,1
41,5
33,3
31,0
37,1
41,5
33,3
33,0
38,4
41,5
34,5
37,5
35,7
35,5
39,4
42,9
38,5
39,0
46,1
41,0
40,2
40,0
44,7
48,1
41,5
44,0
50,5
45,5
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
18
16
16
18
18
18
18
18
19
18
18
20
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
16
19
16
16
16
16
16
19
19
23
16
16
16
16
16
23
23
23
18,5
21,5
20,5
23,0
22,5
25,5
35,0
35,0
38,0
38,0
43,0
43,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,0
46,8
38,1
30,0
35,7
48,3
43,0
50,0
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,0
16,7
15,9
8,0
9,0
18,2
17,0
17,5
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
35,4
40,3
40,3
44,6
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,0
38,1
38,1
45,0
42,8
45,0
44,5
44,5
52,0
50,0
52,0
[mm]
12
15
17
20
25
30
SNR Industry
100
UCFL201
USFL201
ESFL201
EXFL201
UCFL202
USFL202
ESFL202
EXFL202
UCFL203
USFL203
ESFL203
EXFL203
UCFL204
USFL204
ESFL204
EXFL204
UKFL205H
UKFL305H
UCFL205
USFL205
ESFL205
EXFL205
UKFL206H
UCFL305
EXFL305
UKFL306H
UCFL206
USFL206
ESFL206
EXFL206
UKFL207H
UCFL306
EXFL306
UKFL307H
90,0
76,5
76,5
90,0
90,0
76,5
76,5
90,0
90,0
76,5
76,5
90,0
90,0
90,0
90,0
90,0
99,0
113,0
99,0
99,0
99,0
99,0
117,0
113,0
113,0
134,0
117,0
117,0
117,0
117,0
130,0
134,0
134,0
141,0
4/12/08
15:47
Page 66
SNR Industry
101
EXFL200
EXFL300
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
36,5
35,8
***
***
36,5
35,8
***
***
36,5
35,8
***
***
36,5
36,5
***
***
39,1
39,1
39,1
***
***
45,2
45,2
45,2
***
***
48,2
-
FL204
FL203
FL203
FL204
FL204
FL203
FL203
FL204
FL204
FL203
FL203
FL204
FL204
FL204
FL204
FL204
FL205
FL305
FL205
FL205
FL205
FL205
FL206
FL305
FL305
FL306
FL206
FL206
FL206
FL206
FL207
FL306
FL306
FL307
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UK305 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC305
EX305
UK306 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC306
EX306
UK307 + H2307
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
C0r
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
22,36
14,00
14,00
14,00
14,00
19,50
22,36
22,36
27,00
19,50
19,50
19,50
19,50
25,70
27,00
27,00
33,50
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
11,50
7,88
7,88
7,88
7,88
11,20
11,50
11,50
15,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
19,20
0,5
0,4
0,4
0,6
0,5
0,3
0,4
0,5
0,4
0,4
0,4
0,5
0,4
0,4
0,4
0,5
0,7
1,1
0,6
0,6
0,6
0,7
1,0
0,9
1,0
1,4
0,9
0,9
0,9
1,0
1,2
1,4
1,5
1,9
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
-
UCFL200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
UKFL200H
UKFL300H
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
n
**
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESFL200
USFL200
d
[mm]
12
15
17
20
25
30
INDUSTRY
4/12/08
15:47
Page 67
Flanged unit
General
Housing
Un
it
Sh
aft
dia
me
ter
UCFL200
UCFL300
d
L
H
J
A
A1
A2
e
N
s1
B
B1
s
D1
D2
90
90
90
90
100
100
100
112
100
100
100
100
108
112
112
125
108
108
108
108
115
125
125
140
115
115
115
115
130
140
140
150
161
161
161
161
175
185
185
200
175
175
175
175
188
200
200
230
188
188
188
188
197
230
230
240
197
197
197
197
224
240
240
250
130,0
130,0
130,0
130,0
144,0
141,0
141,0
158,0
144,0
144,0
144,0
144,0
148,0
158,0
158,0
177,0
148,0
148,0
148,0
148,0
157,0
177,0
177,0
187,0
157,0
157,0
157,0
157,0
184,0
187,0
187,0
198,0
34,0
34,0
34,0
34,0
36,0
36,0
36,0
40,0
36,0
36,0
36,0
36,0
38,0
40,0
40,0
44,0
38,0
38,0
38,0
38,0
40,0
44,0
44,0
48,0
40,0
40,0
40,0
40,0
43,0
48,0
48,0
52,0
14
14
14
14
14
16
16
17
14
14
14
14
16
17
17
18
16
16
16
16
16
18
18
19
16
16
16
16
18
19
19
20
44,4
42,5
48,4
51,3
45,5
49,0
53,3
50,5
51,2
46,0
53,7
55,9
48,0
56,0
60,3
55,0
52,2
53,0
54,7
56,9
49,5
60,0
63,9
60,0
54,6
54,6
54,7
60,1
54,0
67,0
70,0
64,0
19
19
19
19
21
20
20
23
21
21
21
21
22
23
23
25
22
22
22
22
22
25
25
28
22
22
22
22
25
28
28
30
16
16
16
16
16
23
23
23
16
16
16
16
19
23
23
25
19
19
19
19
19
25
25
25
19
19
19
19
19
25
25
25
24,5
27,5
26,0
30,0
27,5
32,0
29,0
34,0
46,0
46,0
50,0
50,0
55,0
55,0
59,0
59,0
42,9
32,0
38,9
51,1
48,0
51,6
49,2
34,0
43,7
56,3
52,0
57,1
49,2
41,2
43,7
56,3
57,0
58,7
51,6
43,5
43,7
62,7
61,0
66,6
-
17,5
8,5
9,5
18,8
19,0
18,3
19,0
9,0
11,0
21,4
19,0
19,8
19,0
10,2
11,0
21,4
22,0
19,8
19,0
10,9
11,0
24,6
22,0
24,6
-
48,0
48,0
48,9
53,0
53,0
56,5
57,2
57,2
61,8
61,8
61,8
68,7
-
55,6
55,6
58,0
55,0
58,0
60,3
60,3
65,0
63,5
65,0
63,5
63,5
70,0
70,0
70,0
69,9
69,9
75,0
76,2
75,0
[mm]
35
40
45
50
SNR Industry
102
UCFL207
USFL207
ESFL207
EXFL207
UKFL208H
UCFL307
EXFL307
UKFL308H
UCFL208
USFL208
ESFL208
EXFL208
UKFL209H
UCFL308
EXFL308
UKFL309H
UCFL209
USFL209
ESFL209
EXFL209
UKFL210H
UCFL309
EXFL309
UKFL310H
UCFL210
USFL210
ESFL210
EXFL210
UKFL211H
UCFL310
EXFL310
UKFL311H
4/12/08
15:47
Page 68
SNR Industry
103
UKFL200H
UKFL300H
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
48,2
48,2
***
***
55,1
55,1
55,1
***
***
56,3
56,3
56,3
***
***
60,1
60,1
60,1
***
***
63,7
-
FL207
FL207
FL207
FL207
FL208
FL307
FL307
FL308
FL208
FL208
FL208
FL208
FL209
FL308
FL308
FL309
FL209
FL209
FL209
FL209
FL210
FL309
FL309
FL310
FL210
FL210
FL210
FL210
FL211
FL310
FL310
FL311
UC207
US207
ES207
EX207
UK208 + H2308
UC307
EX307
UK308 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UC308
EX308
UK309 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC309
EX309
UK310 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC310
EX310
UK311 + H2311
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
Cr
C0r
[kN]
[kN]
[kg]
25,70
25,70
25,70
25,70
29,60
33,50
33,50
40,56
29,60
29,60
29,60
29,60
31,85
40,56
40,56
53,00
31,85
31,85
31,85
31,85
35,10
53,00
53,00
62,00
35,10
35,10
35,10
35,10
43,55
62,00
62,00
71,50
15,20
15,20
15,20
15,20
18,20
19,20
19,20
24,00
18,20
18,20
18,20
18,20
20,80
24,00
24,00
31,80
20,80
20,80
20,80
20,80
23,20
31,80
31,80
37,80
23,20
23,20
23,20
23,20
29,20
37,80
37,80
44,80
1,2
1,1
1,2
1,3
1,6
1,7
1,8
2,3
1,5
1,5
1,5
1,6
2,0
2,2
2,3
3,3
1,9
1,8
1,9
2,1
2,4
3,1
3,3
4,1
2,2
2,2
2,2
2,4
3,1
4,0
4,2
4,9
aft
dia
me
ter
Sh
t
*
Dz
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
-
UCFL200CO(CC)
We
igh
ins
Be
arin
g
Ho
us
ing
ert
EXFL200
EXFL300
Op
tiveen p
c ro
Clo ap tecs
tive ed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFL200
USFL200
d
[mm]
35
40
45
50
INDUSTRY
4/12/08
15:48
Page 69
Flanged unit
General
Housing
Un
it
Sh
aft
dia
me
ter
UCFL200
UCFL300
d
L
H
J
A
130
130
130
130
140
150
150
160
140
140
140
140
155
160
160
175
155
155
164
175
175
195
160
160
180
185
185
210
164
164
190
195
195
220
224
224
224
224
250
250
250
270
250
250
250
250
258
270
270
295
258
258
275
295
295
320
265
265
290
315
315
355
275
275
305
320
320
370
184,0
184,0
184,0
184,0
202,0
198,0
198,0
212,0
202,0
202,0
202,0
202,0
210,0
212,0
212,0
240,0
210,0
210,0
225,0
240,0
240,0
260,0
216,0
216,0
233,0
250,0
250,0
285,0
225,0
225,0
248,0
260,0
260,0
300,0
43,0
43,0
43,0
43,0
48,0
52,0
52,0
56,0
48,0
48,0
48,0
48,0
50,0
56,0
56,0
58,0
50,0
50,0
55,0
58,0
58,0
66,0
54,0
54,0
58,0
61,0
61,0
68,0
55,0
55,0
63,0
66,0
66,0
74,0
A1
A2
e
N
s1
18 58,4
18 58,5
18 61,4
18 68,6
18 60,0
20 71,0
20 75,2
22 69,5
18 68,7
18 67,8
18 66,3
18 75,8
20 62,0
22 78,0
22 81,4
25 71,5
20 69,7
20 81,6
22 69,5
25 78,0
25 86,2
30 81,5
20 75,4
20 82,6
22 73,0
28 83,0
28 93,9
32 82,5
22 78,5
22 88,8
22 76,0
30 89,0
30 101,7
32 92,0
25
25
25
25
29
30
30
33
29
29
29
29
30
33
33
33
30
30
34
33
33
39
31
31
34
36
36
38
34
34
36
39
39
44
19
19
19
19
23
25
25
31
23
23
23
23
23
31
31
31
23
23
23
31
31
35
23
23
25
35
35
38
23
23
25
35
35
38
31,0
36,5
32,0
38,5
35,5
42,5
39,0
44,5
40,0
48,0
B
B1
s
D1
D2
22,2 69,0
11,8 69,0
12,0
27,7
25,0 74,9
27,8
25,4 74,9
14,9 74,9
12,0
30,9
26,0 81,0
31,0
25,4 82,0
34,1
30,0 87,5
32,5
30,2 86,5
34,1
33,0 94,0
34,2
33,3 91,5
37,3
32,0 100,5
37,3
-
76,2
76,2
80,0
83,0
80,0
84,2
84,2
85,0
89,0
85,0
86,0
98,0
97,0
98,0
96,8
105,0
102,0
105,0
102,0
110,0
113,0
110,0
[mm]
55
60
65
70
75
SNR Industry
104
UCFL211
USFL211
ESFL211
EXFL211
UKFL212H
UCFL311
EXFL311
UKFL312H
UCFL212
USFL212
ESFL212
EXFL212
UKFL213H
UCFL312
EXFL312
UKFL313H
UCFL213
EXFL213
UKFL215H
UCFL313
EXFL313
UKFL315H
UCFL214
EXFL214
UKFL216H
UCFL314
EXFL314
UKFL316H
UCFL215
EXFL215
UKFL217H
UCFL315
EXFL315
UKFL317H
55,6
45,3
48,4
71,3
62,0
66,0
73,0
62,0
65,1
53,7
49,3
77,7
65,0
71,0
79,4
65,0
65,1
85,7
73,0
75,0
85,7
73,0
74,6
85,7
78,0
78,0
92,1
78,0
77,8
92,1
82,0
82,0
- 100,0
82,0
-
4/12/08
15:48
Page 70
SNR Industry
105
UKFL200H
UKFL300H
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
63,7
63,7
***
***
74,0
74,0
74,0
***
***
74,3
74,3
***
-
FL211
FL211
FL211
FL211
FL212
FL311
FL311
FL312
FL212
FL212
FL212
FL212
FL213
FL312
FL312
FL313
FL213
FL213
FL215
FL313
FL313
FL315
FL214
FL214
FL216
FL314
FL314
FL316
FL215
FL215
FL217
FL315
FL315
FL317
UC211
US211
ES211
EX211
UK212 + H2312
UC311
EX311
UK312 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC312
EX312
UK313 + H2313
UC213
EX213
UK215 + H2315
UC313
EX313
UK315 + H2315
UC214
EX214
UK216 + H2316
UC314
EX314
UK316 + H2316
UC215
EX215
UK217 + H2317
UC315
EX315
UK317 + H2317
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
C0r
[kN]
[kg]
43,55
43,55
43,55
43,55
52,50
71,50
71,50
81,60
52,50
52,50
52,50
52,50
57,20
81,60
81,60
93,86
57,20
57,20
66,00
93,86
93,86
113,36
62,00
62,00
72,50
104,26
104,26
122,85
66,00
66,00
83,20
113,36
113,36
132,60
29,20
29,20
29,20
29,20
32,80
44,80
44,80
51,80
32,80
32,80
32,80
32,80
40,00
51,80
51,80
60,50
40,00
40,00
49,50
60,50
60,50
76,80
45,00
45,00
54,20
68,00
68,00
86,50
49,50
49,50
63,80
76,80
76,80
96,50
3,0
2,9
2,7
3,3
3,8
4,6
5,0
5,7
3,9
3,6
3,5
4,2
4,8
5,8
6,1
7,4
4,8
5,3
5,7
7,3
7,8
10,2
5,4
5,9
7,5
8,7
9,3
12,8
5,4
6,0
9,0
9,5
10,6
14,4
Sh
t
Cr
[kN]
aft
dia
me
ter
*
Dz
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
UCFL200CO(CC)
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
tic
rat load
ing
ins
Be
arin
g
Ho
us
ing
ert
EXFL200
EXFL300
We
igh
ESFL200
USFL200
d
[mm]
55
60
65
70
75
INDUSTRY
4/12/08
15:48
Page 71
Flanged unit
General
Housing
Un
it
Sh
aft
dia
me
ter
UCFL200
UCFL300
d
L
H
J
180
180
205
210
210
235
190
190
220
220
250
205
205
235
235
270
250
250
270
270
300
270
300
330
360
330
400
360
400
290
290
320
355
355
385
305
305
370
370
405
320
320
385
385
440
405
405
440
440
470
440
470
520
550
520
600
550
600
233,0
233,0
265,0
285,0
285,0
315,0
248,0
248,0
300,0
300,0
330,0
265,0
265,0
315,0
315,0
360,0
330,0
330,0
360,0
360,0
390,0
360,0
390,0
430,0
460,0
430,0
500,0
460,0
500,0
A
A1
A2
e
N
s1
B
B1
22
22
23
32
32
36
22
22
32
32
40
23
23
36
36
40
40
40
40
40
42
40
42
48
50
48
60
50
60
83,3
91,9
82,0
90,0
103,9
92,0
87,6
83,6
100,0
111,5
111,0
96,3
86,5
100,0
116,3
113,0
121,0
134,5
125,0
137,6
121,0
127,0
131,0
130,0
134,0
140,0
148,0
146,0
161,0
34
34
40
38
38
44
36
36
44
44
59
40
40
44
44
59
59
59
59
59
60
59
60
65
65
65
75
65
75
25
25
25
38
38
38
25
25
38
38
41
25
25
38
38
44
41
41
44
44
44
44
44
47
47
47
51
47
51
42,0
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
86,0
86,0
90,0
97,0
105,0
112,0
121,0
131,0
-
82,6
95,2
86,0
106,4
85,7
73,2
96,0
109,5
96,0
72,5
96,0
115,9
103,0
122,3
108,0
128,6
112,0
117,0
126,0
135,0
145,0
s
D1
D2
33,3
37,3
34,0
40,5
34,1
23,4
40,0
42,0
39,7
24,5
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
98,0
107,9
105,1
114,0
111,0
120,0
126,5
134,5
140,5
149,0
163,0
177,0
190,0
110,0
120,0
119,0
120,0
119,0
127,0
125,0
120,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
106
UCFL216
EXFL216
UKFL218H
UCFL316
EXFL316
UKFL318H
UCFL217
EXFL217
UCFL317
EXFL317
UKFL319H
UCFL218
EXFL218
UCFL318
EXFL318
UKFL320H
UCFL319
EXFL319
UCFL320
EXFL320
UKFL322H
UCFL321
UCFL322
UKFL324H
UKFL326H
UCFL324
UKFL328H
UCFL326
UCFL328
58,0
58,0
68,0
68,0
68,0
76,0
63,0
63,0
74,0
74,0
94,0
68,0
68,0
76,0
76,0
94,0
94,0
94,0
94,0
94,0
96,0
94,0
96,0
110,0
115,0
110,0
125,0
115,0
125,0
4/12/08
15:48
Page 72
SNR Industry
107
-
Dz
-
FL216
FL216
FL218
FL316
FL316
FL318
FL217
FL217
FL317
FL317
FL319
FL218
FL218
FL318
FL318
FL320
FL319
FL319
FL320
FL320
FL322
FL321
FL322
FL324
FL326
FL324
FL328
FL326
FL328
UC216
EX216
UK218 + H2318
UC316
EX316
UK318 + H2318
UC217
EX217
UC317
EX317
UK319 + H2319
UC218
EX218
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
-
-
Cr
C0r
[kN]
[kN]
[kg]
72,50
72,50
96,00
122,85
122,85
143,00
83,20
83,20
132,60
132,60
156,00
96,00
96,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
54,20
54,20
71,50
86,50
86,50
108,00
63,80
63,80
96,50
96,50
122,00
71,50
71,50
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
7,1
7,4
11,2
12,5
13,6
17,1
8,5
8,9
14,4
15,5
21,6
10,9
11,4
17,0
18,3
25,9
21,3
22,8
26,1
27,9
35,9
25,0
32,6
47,7
61,3
45,0
83,6
56,4
77,6
Sh
t
*
We
igh
ins
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
Z
Be
arin
g
ing
Ho
us
G
UCFL200CO(CC)
aft
dia
me
ter
UKFL200H
UKFL300H
ert
EXFL200
EXFL300
Op
tiveen p
c ro
Clo ap tecs
tive ed
capprot
ecDy
nam
*
rat
ing ic loa *
d
Sta
t
rat ic loa
ing d
ESFL200
USFL200
d
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:48
Page 73
Flanged unit
General
Housing
FLZ200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFLZ200
d
L
H
J
A
A1
A2
A4
[mm]
12
15
17
20
25
30
35
40
SNR Industry
108
H3
e
N
s1
B
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
17
17
17
17
17
17
17
17
17
17
20
20
20
20
20
20
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
11,5
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
h8
UCFLZ201
USFLZ201
ESFLZ201
EXFLZ201
UCFLZ202
USFLZ202
ESFLZ202
EXFLZ202
UCFLZ203
USFLZ203
ESFLZ203
EXFLZ203
UCFLZ204
USFLZ204
ESFLZ204
EXFLZ204
UKFLZ205H
UCFLZ205
USFLZ205
ESFLZ205
EXFLZ205
UKFLZ206H
UCFLZ206
USFLZ206
ESFLZ206
EXFLZ206
UKFLZ207H
UCFLZ207
USFLZ207
ESFLZ207
EXFLZ207
UKFLZ208H
UCFLZ208
USFLZ208
ESFLZ208
EXFLZ208
UKFLZ209H
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
60,5
70,0
70,0
70,0
70,0
70,0
83,0
83,0
83,0
83,0
83,0
94,0
94,0
94,0
94,0
94,0
105,0
105,0
105,0
105,0
105,0
111,0
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
112,5
124,0
124,0
124,0
124,0
124,0
142,0
142,0
142,0
142,0
142,0
155,0
155,0
155,0
155,0
155,0
172,0
172,0
172,0
172,0
172,0
180,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
90,0
99,0
99,0
99,0
99,0
99,0
116,5
116,5
116,5
116,5
116,5
130,0
130,0
130,0
130,0
130,0
143,5
143,5
143,5
143,5
143,5
148,5
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,0
32,5
32,5
32,5
32,5
32,5
30,0
30,0
30,0
30,0
30,0
32,5
32,5
32,5
32,5
32,5
36,0
36,0
36,0
36,0
36,0
36,5
10,0
8,0
8,0
10,0
10,0
8,0
8,0
10,0
10,0
8,0
8,0
10,0
10,0
10,0
10,0
10,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,0
12,5
12,5
12,5
12,5
12,5
13,0
13,0
13,0
13,0
13,0
13,0
37,3
35,0
41,1
45,5
37,3
35,0
41,1
45,5
37,3
35,0
41,1
45,5
37,3
37,0
42,4
45,5
37,5
38,7
38,5
42,4
45,9
37,5
39,2
39,0
43,7
47,1
39,5
42,4
40,5
46,4
49,3
44,5
50,2
45,0
52,7
54,9
46,0
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
28,5
29,0
29,0
29,0
29,0
29,0
27,0
27,0
27,0
27,0
27,0
28,5
28,5
28,5
28,5
28,5
32,0
32,0
32,0
32,0
32,0
32,5
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
60
60
60
60
60
80
80
80
80
80
90
90
90
90
90
100
100
100
100
100
105
4/12/08
15:48
Page 74
SNR Industry
109
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
s
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FLZ204
FLZ203
FLZ203
FLZ204
FLZ204
FLZ203
FLZ203
FLZ204
FLZ204
FLZ203
FLZ203
FLZ204
FLZ204
FLZ204
FLZ204
FLZ204
FLZ205
FLZ205
FLZ205
FLZ205
FLZ205
FLZ206
FLZ206
FLZ206
FLZ206
FLZ206
FLZ207
FLZ207
FLZ207
FLZ207
FLZ207
FLZ208
FLZ208
FLZ208
FLZ208
FLZ208
FLZ209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,4
0,5
0,5
0,7
0,7
0,6
0,7
0,7
1,0
0,9
0,9
0,9
1,0
1,2
1,2
1,1
1,2
1,3
1,7
1,6
1,6
1,6
1,8
1,9
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
ins
Be
arin
g
ing
Ho
us
B1
UKFLZ200H
EXFLZ200
ert
ESFLZ200
Dy
n
rat amic
ing loa
d
USFLZ200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:48
Page 75
Flanged unit
General
Housing
FLZ200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFLZ200
d
L
H
J
A
A1
A2
A4
[mm]
45
50
55
60
SNR Industry
110
H3
e
N
s1
B
20
20
20
20
24
24
24
24
24
30
30
30
30
30
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
14,0
18,0
18,0
18,0
18,0
18,0
27,5
31,0
-
55,0
62,0
-
h8
UCFLZ209
USFLZ209
ESFLZ209
EXFLZ209
UKFLZ210H
UCFLZ210
USFLZ210
ESFLZ210
EXFLZ210
UKFLZ212H
UCFLZ212
USFLZ212
ESFLZ212
EXFLZ212
111,0
111,0
111,0
111,0
116,0
116,0
116,0
116,0
116,0
138,0
138,0
138,0
138,0
138,0
180,0
180,0
180,0
180,0
190,0
190,0
190,0
190,0
190,0
238,0
238,0
238,0
238,0
238,0
148,5
148,5
148,5
148,5
157,0
157,0
157,0
157,0
157,0
202,0
202,0
202,0
202,0
202,0
36,5
36,5
36,5
36,5
41,0
41,0
41,0
41,0
41,0
49,0
49,0
49,0
49,0
49,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
13,0
16,0
16,0
16,0
16,0
16,0
50,2
51,0
52,7
54,9
51,5
56,6
56,6
56,7
62,1
61,0
69,7
68,8
67,3
76,8
32,5
32,5
32,5
32,5
37,0
37,0
37,0
37,0
37,0
45,0
45,0
45,0
45,0
45,0
105
105
105
105
105
105
105
105
105
130
130
130
130
130
4/12/08
15:48
Page 76
SNR Industry
111
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
65,1
53,7
49,3
77,7
s
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
25,4
14,9
12,0
30,9
D1
57,2
57,2
61,8
61,8
74,9
74,9
-
D2
63,5
63,5
70,0
69,9
69,9
80,0
84,2
84,2
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FLZ209
FLZ209
FLZ209
FLZ209
FLZ210
FLZ210
FLZ210
FLZ210
FLZ210
FLZ212
FLZ212
FLZ212
FLZ212
FLZ212
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK212 + H2312
UC212
US212
ES212
EX212
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
52,50
52,50
52,50
52,50
52,50
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
32,80
32,80
32,80
32,80
32,80
1,8
1,8
1,8
2,0
2,3
2,2
2,1
2,2
2,4
3,5
3,5
3,3
3,2
3,9
aft
dia
me
ter
Sh
t
We
igh
ins
Be
arin
g
ing
Ho
us
B1
UKFLZ200H
Sta
t
rat ic loa
ing d
EXFLZ200
Dy
n
rat amic
ing loa
d
ESFLZ200
ert
USFLZ200
d
[mm]
45
50
55
60
INDUSTRY
4/12/08
15:48
Page 77
Flanged unit
General
FD200 relubricatable
Un
it
Sh
aft
dia
me
ter
Housing
d
L
H
J
A
A2
e
N1
N
58,7
58,7
58,7
58,7
58,7
58,7
66,5
66,5
71,0
71,0
84,0
84,0
94,0
94,0
104,0
104,0
81,0
81,0
81,0
81,0
81,0
81,0
90,5
90,5
97,0
97,0
112,5
112,5
126,0
126,0
148,0
148,0
63,5
63,5
63,5
63,5
63,5
63,5
71,4
71,4
76,2
76,2
90,5
90,5
100,0
100,0
119,0
119,0
15,0
15,0
15,0
15,0
15,0
15,0
17,0
17,0
17,5
17,5
20,5
20,5
22,0
22,0
24,0
24,0
24,4
30,5
24,4
30,5
24,4
30,5
27,5
32,9
29,4
33,3
33,4
38,1
35,9
41,8
37,1
44,8
8,4
8,4
8,4
8,4
8,4
8,4
9,5
9,5
9,9
9,9
11,4
11,4
12,4
12,4
12,05
12,05
M6
M6
M6
M6
M6
M6
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
6,5
6,5
6,5
6,5
6,5
6,5
9,0
9,0
9,0
9,0
11,0
11,0
11,0
11,0
14,0
14,0
B1
s
D1
[mm]
12
15
17
20
25
30
35
40
USFD201
ESFD201
USFD202
ESFD202
USFD203
ESFD203
USFD204
ESFD204
USFD205
ESFD205
USFD206
ESFD206
USFD207
ESFD207
USFD208
ESFD208
Type code for the execution with mounting thread: e. g.: USFD204M10
SNR Industry
112
22,0
28,6
22,0
28,6
22,0
28,6
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
34,0
43,7
6,0
6,5
6,0
6,5
6,0
6,5
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
9,0
11,0
24,6
24,6
24,6
29,0
34,0
40,3
48,0
53,0
-
4/12/08
15:48
Page 78
SNR Industry
113
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FD203
FD203
FD203
FD203
FD203
FD203
FD204
FD204
FD205
FD205
FD206
FD206
FD207
FD207
FD208
FD208
US201
ES201
US202
ES202
US203
ES203
US204
ES204
US205
ES205
US206
ES206
US207
ES207
US208
ES208
Cr
C0r
[kN]
[kN]
[kg]
9,55
9,55
9,55
9,55
9,55
9,55
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
29,60
29,60
4,78
4,78
4,78
4,78
4,78
4,78
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
18,20
18,20
0,3
0,3
0,3
0,3
0,3
0,3
0,4
0,4
0,5
0,5
0,7
0,7
1,0
1,0
1,3
1,3
aft
dia
me
ter
Sh
t
We
igh
Dy
n
rat amic
ing loa
d
ins
ert
28,6
28,6
28,6
33,3
38,1
44,5
55,6
60,3
Be
arin
g
ing
D2
Sta
t
rat ic loa
ing d
ESFD200
USFD200
Ho
us
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:48
Page 79
Flanged unit
General
FAE200 relubricatable
Sh
aft
dia
me
ter
Un
it
Housing
d
L
H
J
J1
A
A1
A2
L1
[mm]
20
25
30
35
SNR Industry
114
USFAE204
ESFAE204
USFAE205
ESFAE205
USFAE206
ESFAE206
USFAE207
ESFAE207
61
61
70
70
80
80
90
90
112
112
124
124
142
142
155
155
90
90
99
99
117
117
128
128
30,0
30,0
37,5
37,5
40,0
40,0
45,0
45,0
20,0
20,0
22,5
22,5
24,0
24,0
26,5
26,5
10,0
10,0
11,0
11,0
12,0
12,0
12,5
12,5
28,5
33,9
32,0
35,9
35,0
39,7
38,5
44,4
52
52
63
63
65
65
75
75
w
H3
+0,2
+0,2
2,0
2,0
3,5
3,5
3,0
3,0
4,5
4,5
50,8
50,8
63,5
63,5
73,0
73,0
82,5
82,5
e
10,5
10,5
12,5
12,5
13,0
13,0
15,0
15,0
4/12/08
15:48
Page 80
SNR Industry
115
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
s
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
D1
29,0
34,0
40,3
48,0
-
D2
33,3
38,1
44,5
55,6
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
FAE204
FAE204
FAE205
FAE205
FAE206
FAE206
FAE207
FAE207
US204
ES204
US205
ES205
US206
ES206
US207
ES207
Cr
C0r
[kN]
[kN]
[kg]
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
0,4
0,5
0,5
0,5
0,8
0,8
1,1
1,2
aft
dia
me
ter
Sh
t
We
igh
ert
Dy
n
rat amic
ing loa
d
ins
11,5
11,5
11,5
11,5
11,5
11,5
14,0
14,0
B1
Be
arin
g
ing
Ho
us
N
Sta
t
rat ic loa
ing d
ESFAE200
USFAE200
d
[mm]
20
25
30
35
INDUSTRY
4/12/08
15:48
Page 81
Flanged unit
General
Housing
FA200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCFA200
d
L
H
J
J1
A
A1
A2
L1
e
N
s1
B
B1
s
60
57
57
60
60
57
57
60
60
57
57
60
60
60
60
60
68
68
68
68
68
80
80
80
80
80
90
90
90
90
90
100
100
100
100
100
108
102
95
95
102
102
95
95
102
102
95
95
102
102
102
102
102
125
125
125
125
125
144
144
144
144
144
161
161
161
161
161
175
175
175
175
175
181
78
75
75
78
78
75
75
78
78
75
75
78
78
78
78
78
98
98
98
98
98
117
117
117
117
117
130
130
130
130
130
144
144
144
144
144
148
40
37
37
40
40
37
37
40
40
37
37
40
40
40
40
40
51
51
51
51
51
58
58
58
58
58
66
66
66
66
66
71
71
71
71
71
72
25,5
22,0
22,0
25,5
25,5
22,0
22,0
25,5
25,5
22,0
22,0
25,5
25,5
25,5
25,5
25,5
27,0
27,0
27,0
27,0
27,0
31,0
31,0
31,0
31,0
31,0
34,0
34,0
34,0
34,0
34,0
36,0
36,0
36,0
36,0
36,0
38,0
12
9
9
12
12
9
9
12
12
9
9
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
16
18
33,3
29,0
35,1
41,5
33,3
29,0
35,1
41,5
33,3
29,0
35,1
41,5
33,3
33,0
38,4
41,5
34,5
35,7
35,5
39,4
42,9
38,5
40,2
40,0
44,7
48,1
41,5
44,4
42,5
48,4
51,3
45,5
51,2
46,0
53,7
55,9
48,0
54
47
47
54
54
47
47
54
54
47
47
54
54
54
54
54
65
65
65
65
65
72
72
72
72
72
82
82
82
82
82
87
87
87
87
87
90
15
13
13
15
15
13
13
15
15
13
13
15
15
15
15
15
16
16
16
16
16
18
18
18
18
18
19
19
19
19
19
21
21
21
21
21
22
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
15
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
116
UCFA201
USFA201
ESFA201
EXFA201
UCFA202
USFA202
ESFA202
EXFA202
UCFA203
USFA203
ESFA203
EXFA203
UCFA204
USFA204
ESFA204
EXFA204
UKFA205H
UCFA205
USFA205
ESFA205
EXFA205
UKFA206H
UCFA206
USFA206
ESFA206
EXFA206
UKFA207H
UCFA207
USFA207
ESFA207
EXFA207
UKFA208H
UCFA208
USFA208
ESFA208
EXFA208
UKFA209H
4/12/08
15:49
Page 82
SNR Industry
117
EXFA200
D2
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
36,5
33,0
***
***
36,5
33,0
***
***
33,0
33,0
***
***
36,5
36,5
***
***
39,1
39,1
39,1
***
***
44,1
44,1
44,1
***
***
48,3
48,3
48,3
***
***
55,1
55,1
55,1
***
***
56,3
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
FA204
FA203
FA203
FA204
FA204
FA203
FA203
FA204
FA204
FA203
FA203
FA204
FA204
FA204
FA204
FA204
FA205
FA205
FA205
FA205
FA205
FA206
FA206
FA206
FA206
FA206
FA207
FA207
FA207
FA207
FA207
FA208
FA208
FA208
FA208
FA208
FA209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
C0r
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,5
0,4
0,5
0,6
0,6
0,4
0,5
0,6
0,5
0,5
0,5
0,6
0,5
0,5
0,6
0,6
0,7
0,7
0,7
0,7
0,8
1,2
1,2
1,1
1,2
1,3
1,6
1,6
1,5
1,6
1,7
2,1
2,0
2,0
2,0
2,1
2,4
Sh
t
Cr
[kN]
aft
dia
me
ter
*
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UCFA200CO(CC)
UKFA200H
ert
ESFA200
Op
tiveen p
c ro
Clo ap tectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
USFA200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:49
Page 83
Flanged unit
General
Housing
FA200 relubricatable
Sh
aft
dia
me
ter
Un
it
UCFA200
d
L
H
J
J1
A
A1
A2
L1
e
N
s1
B
B1
s
108
108
108
108
115
115
115
115
115
130
130
130
130
130
140
140
140
140
140
181
181
181
181
190
190
190
190
190
219
219
219
219
219
250
250
250
250
250
148
148
148
148
157
157
157
157
157
184
184
184
184
184
202
202
202
202
202
72
72
72
72
76
76
76
76
76
86
86
86
86
86
92
92
92
92
92
38,0
38,0
38,0
38,0
40,0
40,0
40,0
40,0
40,0
43,0
43,0
43,0
43,0
43,0
48,0
48,0
48,0
48,0
48,0
18
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
20
52,2
53,0
54,7
56,9
49,5
54,6
54,6
54,7
60,1
54,0
58,4
58,5
61,4
68,6
60,0
68,7
67,8
66,3
75,8
90
90
90
90
94
94
94
94
94
104
104
104
104
104
118
118
118
118
118
22
22
22
22
22
22
22
22
22
25
25
25
25
25
29
29
29
29
29
15
15
15
15
15
15
15
15
15
16
16
16
16
16
23
23
23
23
23
27,5
29,0
31,0
-
55,0
59,0
62,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
[mm]
45
50
55
60
SNR Industry
118
UCFA209
USFA209
ESFA209
EXFA209
UKFA210H
UCFA210
USFA210
ESFA210
EXFA210
UKFA211H
UCFA211
USFA211
ESFA211
EXFA211
UKFA212H
UCFA212
USFA212
ESFA212
EXFA212
4/12/08
15:49
Page 84
SNR Industry
119
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
-
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
56,3
56,3
***
***
59,3
59,3
59,3
***
***
62,8
62,8
62,8
***
***
73,3
73,3
73,3
***
***
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
FA209
FA209
FA209
FA209
FA210
FA210
FA210
FA210
FA210
FA211
FA211
FA211
FA211
FA211
FA212
FA212
FA212
FA212
FA212
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
Cr
C0r
[kN]
[kN]
[kg]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
2,3
2,3
2,3
2,5
2,9
2,7
2,7
2,7
2,9
3,6
3,5
3,5
3,3
3,8
4,2
4,2
4,0
3,9
4,6
aft
dia
me
ter
Sh
t
*
We
igh
ins
Be
arin
g
ing
Ho
us
D1
UCFA200CO(CC)
UKFA200H
ert
EXFA200
Op
tiveen p
c rot
Clo ap ectivesed
capprot
ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESFA200
USFA200
d
[mm]
45
50
55
60
INDUSTRY
4/12/08
15:49
Page 85
Take-up unit
Housing
T200 relubricatable
T300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200
UCT300
d
L
H
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
97
122
97
97
97
97
113
122
122
137
113
113
113
113
129
137
137
150
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
102
89
89
100
102
102
102
102
102
100
100
111
J1
J2
A
A1
L1
L2
L3
L4
L5
H1
N
N1
s1
B
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
76
12
80
12
76
12
76
12
76
12
76
12
89
12
80
12
80
16
90
12
89
12
89
12
89
12
89
12
89
16
90
16
90
16 100
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
36
32
32
32
32
37
36
36
41
37
37
37
37
37
41
41
45
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
24
26
24
24
24
24
28
26
26
28
28
28
28
28
30
28
28
32
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
35,5
36,5
43,5
36,5
36,5
36,5
36,5
41,5
43,5
43,5
48,0
41,5
41,5
41,5
41,5
46,0
48,0
48,0
54,0
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
14
10
10
10
10
10
14
14
16
10
10
10
10
13
16
16
17
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
62
76
62
62
62
62
70
76
76
85
70
70
70
70
78
85
85
94
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
65
51
51
51
51
57
65
65
74
57
57
57
57
64
74
74
80
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
18
16
16
16
16
16
18
18
20
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
62
51
51
51
51
56
62
62
70
56
56
56
56
64
70
70
75
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
26
19
19
19
19
22
26
26
28
22
22
22
22
22
28
28
30
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
36
32
32
32
32
37
36
36
41
37
37
37
37
37
41
41
45
18,5
21,5
20,5
23,0
22,5
25,5
35
35
38
38
43
43
[mm]
12
15
17
20
25
30
SNR Industry
120
UCT201
UST201
EST201
EXT201
UCT202
UST202
EST202
EXT202
UCT203
UST203
EST203
EXT203
UCT204
UST204
EST204
EXT204
UKT205H
UKT305H
UCT205
UST205
EST205
EXT205
UKT206H
UCT305
EXT305
UKT306H
UCT206
UST206
EST206
EXT206
UKT207H
UCT306
EXT306
UKT307H
4/12/08
15:49
Page 86
SNR Industry
121
UKT200H
UKT300H
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,0
46,8
38,1
30,0
35,7
48,3
43,0
50,0
-
s
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,0
16,7
15,9
8,0
9,0
18,2
17,0
17,5
-
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
35,4
40,3
40,3
44,6
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,0
38,1
38,1
45,0
42,8
45,0
44,5
44,5
52,0
50,0
52,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
43,7
43,7
***
***
43,7
43,7
***
***
43,7
43,7
***
***
43,7
43,7
***
***
47,5
47,5
47,5
***
***
52,5
52,5
52,5
***
***
59,1
-
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
-
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T205
T305
T205
T205
T205
T205
T206
T305
T305
T306
T206
T206
T206
T206
T207
T306
T306
T307
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UK305 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC305
EX305
UK306 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC306
EX306
UK307 + H2307
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
22,36
14,00
14,00
14,00
14,00
19,50
22,36
22,36
27,00
19,50
19,50
19,50
19,50
25,70
27,00
27,00
33,50
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
11,50
7,88
7,88
7,88
7,88
11,20
11,50
11,50
15,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
19,20
0,8
0,7
0,7
0,9
0,8
0,6
0,7
0,8
0,7
0,7
0,7
0,8
0,7
0,7
0,7
0,8
0,8
1,4
0,8
0,8
0,8
0,9
1,3
1,3
1,3
1,8
1,2
1,2
1,2
1,3
1,6
1,8
1,9
2,5
aft
dia
me
ter
t
*
Sh
ins
Be
arin
g
ing
Ho
us
B1
UCT200CO(CC)
We
igh
EXT200
EXT300
Op
tiveen pr
Clo capotectivesed s
capprot
s ecDy
n
*
rat amic
ing loa *
d
Sta
t
rat ic loa
ing d
EST200
ert
UST200
d
[mm]
12
15
17
20
25
30
INDUSTRY
4/12/08
15:49
Page 87
Take-up unit
General
Housing
T200 relubricatable
T300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200
UCT300
d
L
H
J1
J2
A
A1
L1
L2
L3
L4
L5
H1
N
N1
s1
B
129
129
129
129
144
150
150
162
144
144
144
144
144
162
162
178
144
144
144
144
149
178
178
192
149
149
149
149
171
192
192
207
102
102
102
102
114
111
111
124
114
114
114
114
117
124
124
138
117
117
117
117
117
138
138
151
117
117
117
117
146
151
151
163
12
12
12
12
16
16
16
18
16
16
16
16
16
18
18
18
16
16
16
16
16
18
18
20
16
16
16
16
22
20
20
22
89
89
89
89
102
100
100
112
102
102
102
102
102
112
112
125
102
102
102
102
102
125
125
140
102
102
102
102
130
140
140
150
37
37
37
37
49
45
45
50
49
49
49
49
49
50
50
55
49
49
49
49
49
55
55
61
49
49
49
49
64
61
61
66
30
30
30
30
33
32
32
34
33
33
33
33
35
34
34
38
35
35
35
35
37
38
38
40
37
37
37
37
38
40
40
44
46,0
46,0
46,0
46,0
46,5
54,0
54,0
55,5
46,5
46,5
46,5
46,5
45,5
55,5
55,5
61,5
45,5
45,5
45,5
45,5
47,0
61,5
61,5
65,0
47,0
47,0
47,0
47,0
58,5
65,0
65,0
69,5
13
13
13
13
16
17
17
19
16
16
16
16
16
19
19
20
16
16
16
16
16
20
20
22
16
16
16
16
19
22
22
23
78
78
78
78
88
94
94
100
88
88
88
88
87
100
100
110
87
87
87
87
90
110
110
118
90
90
90
90
106
118
118
127
64
64
64
64
83
80
80
89
83
83
83
83
83
89
89
97
83
83
83
83
86
97
97
106
86
86
86
86
95
106
106
115
16
16
16
16
19
20
20
22
19
19
19
19
19
22
22
24
19
19
19
19
19
24
24
27
19
19
19
19
25
27
27
29
64
64
64
64
83
75
75
83
83
83
83
83
83
83
83
90
83
83
83
83
83
90
90
98
83
83
83
83
102
98
98
105
22
22
22
22
29
30
30
32
29
29
29
29
29
32
32
34
29
29
29
29
29
34
34
37
29
29
29
29
35
37
37
39
37
37
37
37
49
45
45
50
49
49
49
49
49
50
50
55
49
49
49
49
49
55
55
61
49
49
49
49
64
61
61
66
24,5
27,5
26,0
30,0
27,5
32,0
29,0
34,0
46
46
50
50
55
55
59
59
[mm]
35
40
45
50
SNR Industry
122
UCT207
UST207
EST207
EXT207
UKT208H
UCT307
EXT307
UKT308H
UCT208
UST208
EST208
EXT208
UKT209H
UCT308
EXT308
UKT309H
UCT209
UST209
EST209
EXT209
UKT210H
UCT309
EXT309
UKT310H
UCT210
UST210
EST210
EXT210
UKT211H
UCT310
EXT310
UKT311H
4/12/08
15:49
Page 88
SNR Industry
123
17,5
8,5
9,5
18,8
19,0
18,3
19,0
9,0
11,0
21,4
19,0
19,8
19,0
10,2
11,0
21,4
22,0
19,8
19,0
10,9
11,0
24,6
22,0
24,6
-
D1
48,0
48,0
48,9
53,0
53,0
56,5
57,2
57,2
61,8
61,8
61,8
68,7
-
D2
55,6
55,6
58,0
55,0
58,0
60,3
60,3
65,0
63,5
65,0
63,5
63,5
70,0
70,0
70,0
69,9
69,9
75,0
76,2
75,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
Z
59,1
59,1
***
***
68,6
68,6
68,6
***
***
68,6
68,6
68,6
***
***
74,1
74,1
74,1
***
***
75,6
-
Dz
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
-
T207
T207
T207
T207
T208
T307
T307
T308
T208
T208
T208
T208
T209
T308
T308
T309
T209
T209
T209
T209
T210
T309
T309
T310
T210
T210
T210
T210
T211
T310
T310
T311
UC207
US207
ES207
EX207
UK208 + H2308
UC307
EX307
UK308 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UC308
EX308
UK309 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC309
EX309
UK310 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC310
EX310
UK311 + H2311
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
-
Cr
C0r
[kN]
[kN]
[kg]
25,70
25,70
25,70
25,70
29,60
33,50
33,50
40,56
29,60
29,60
29,60
29,60
31,85
40,56
40,56
53,00
31,85
31,85
31,85
31,85
35,10
53,00
53,00
62,00
35,10
35,10
35,10
35,10
43,55
62,00
62,00
71,50
15,20
15,20
15,20
15,20
18,20
19,20
19,20
24,00
18,20
18,20
18,20
18,20
20,80
24,00
24,00
31,80
20,80
20,80
20,80
20,80
23,20
31,80
31,80
37,80
23,20
23,20
23,20
23,20
29,20
37,80
37,80
44,80
1,6
1,5
1,6
1,7
2,4
2,3
2,4
3,0
2,3
2,3
2,3
2,5
2,5
3,0
3,1
4,2
2,3
2,3
2,4
2,5
2,7
4,0
4,2
4,1
2,5
2,5
2,5
2,7
4,0
4,0
4,2
6,4
aft
dia
me
ter
t
*
Sh
ins
42,9
32,0
38,9
51,1
48,0
51,6
49,2
34,0
43,7
56,3
52,0
57,1
49,2
41,2
43,7
56,3
57,0
58,7
51,6
43,5
43,7
62,7
61,0
66,6
-
s
Be
arin
g
ing
Ho
us
B1
UCT200CO(CC)
UKT200H
UKT300H
We
igh
EXT200
EXT300
Op
tiveen p
r
Clo capsotecs
tive ed
capprot
s ecDy
nam
*
rat
ing ic loa *
d
Sta
t
rat ic loa
ing d
EST200
ert
UST200
d
[mm]
35
40
45
50
INDUSTRY
4/12/08
15:49
Page 89
Take-up unit
General
Housing
T200 relubricatable
T300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200
UCT300
d
L
H
J1
J2
A
A1
L1
L2
L3
L4
L5
H1
N
N1
s1
B
171
171
171
171
194
207
207
220
194
194
194
194
224
220
220
238
224
224
232
238
238
262
224
224
235
252
252
282
232
232
260
262
262
298
146
146
146
146
146
163
163
178
146
146
146
146
167
178
178
190
167
167
167
190
190
216
167
167
184
202
202
230
167
167
198
216
216
240
22
22
22
22
22
22
22
22
22
22
22
22
26
22
22
26
26
26
26
26
26
26
26
26
26
26
26
30
26
26
30
26
26
32
130
130
130
130
130
150
150
160
130
130
130
130
151
160
160
170
151
151
151
170
170
192
151
151
165
180
180
204
151
151
173
192
192
214
64
64
64
64
64
66
66
71
64
64
64
64
70
71
71
80
70
70
70
80
80
90
70
70
70
90
90
102
70
70
73
90
90
102
38
38
38
38
42
44
44
46
42
42
42
42
44
46
46
50
44
44
48
50
50
55
46
46
51
52
52
60
48
48
54
55
55
64
58,5
58,5
58,5
58,5
68,0
69,5
69,5
73,5
68,0
68,0
68,0
68,0
76,5
73,5
73,5
79,0
76,5
76,5
79,5
79,0
79,0
85,0
76,5
76,5
79,5
85,0
85,0
94,0
79,5
79,5
83,5
85,0
85,0
98,0
19
19
19
19
19
23
23
25
19
19
19
19
21
25
25
27
21
21
21
27
27
27
21
21
21
27
27
30
21
21
29
27
27
32
106
106
106
106
119
127
127
135
119
119
119
119
137
135
135
146
137
137
140
146
146
160
137
137
140
155
155
174
140
140
162
160
160
183
95
95
95
95
102
115
115
123
102
102
102
102
121
123
123
134
121
121
121
134
134
150
121
121
121
140
140
160
121
121
157
150
150
170
25
25
25
25
32
29
29
31
32
32
32
32
32
31
31
32
32
32
32
32
32
36
32
32
32
36
36
42
32
32
38
36
36
42
102
102
102
102
102
105
105
113
102
102
102
102
111
113
113
116
111
111
111
116
116
132
111
111
111
130
130
150
111
111
124
132
132
152
35
35
35
35
35
39
39
41
35
35
35
35
41
41
41
43
41
41
41
43
43
46
41
41
41
46
46
53
41
41
48
46
46
53
64
64
64
64
64
66
66
71
64
64
64
64
70
71
71
70
70
70
70
70
70
85
70
70
70
85
85
98
70
70
73
85
85
98
31,0
36,5
32,0
38,5
35,5
42,5
39,0
44,5
40,0
48,0
62
62
65
65
73
73
78
78
82
82
[mm]
55
60
65
70
75
SNR Industry
124
UCT211
UST211
EST211
EXT211
UKT212H
UCT311
EXT311
UKT312H
UCT212
UST212
EST212
EXT212
UKT213H
UCT312
EXT312
UKT313H
UCT213
EXT213
UKT215H
UCT313
EXT313
UKT315H
UCT214
EXT214
UKT216H
UCT314
EXT314
UKT316H
UCT215
EXT215
UKT217H
UCT315
EXT315
UKT317H
4/12/08
15:49
Page 90
SNR Industry
125
55,6
45,3
48,4
71,3
66,0
73,0
65,1
53,7
49,3
77,7
71,0
79,4
65,1
85,7
75,0
85,7
74,6
85,7
78,0
92,1
77,8
92,1
82,0
100,0
-
s
D1
D2
G
22,2 69,0
M6x1
11,8 69,0
M6x1
12,0
76,2 M6x1
27,7
76,2 M6x1
80,0 M6x1
25,0 74,9
M6x1
27,8
83,0 M6x1
80,0 M6x1
25,4 74,9
M6x1
14,9 74,9
M6x1
12,0
84,2 M6x1
30,9
84,2 M6x1
85,0 M6x1
26,0 81,0
M6x1
31,0
89,0 M6x1
85,0 M6x1
25,4 82,0
M6x1
34,1
86,0 M6x1
98,0 M10x1
30,0 87,5
M6x1
32,5
97,0 M6x1
98,0 M10x1
30,2 86,5
M10x1
34,1
96,8 M10x1
- 105,0 M10x1
33,0 94,0
M10x1
34,2
- 102,0 M10x1
- 105,0 M10x1
33,3 91,5
M10x1
37,3
- 102,0 M10x1
- 110,0 M10x1
32,0 100,5
M10x1
37,3
- 113,0 M10x1
- 110,0 M10x1
Z
75,6
75,6
***
***
88,6
88,6
88,6
***
***
88,6
88,6
***
-
*
Dz
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
-
T211
T211
T211
T211
T212
T311
T311
T312
T212
T212
T212
T212
T213
T312
T312
T313
T213
T213
T215
T313
T313
T315
T214
T214
T216
T314
T314
T316
T215
T215
T217
T315
T315
T317
UC211
US211
ES211
EX211
UK212 + H2312
UC311
EX311
UK312 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC312
EX312
UK313 + H2313
UC213
EX213
UK215 + H2315
UC313
EX313
UK315 + H2315
UC214
EX214
UK216 + H2316
UC314
EX314
UK316 + H2316
UC215
EX215
UK217 + H2317
UC315
EX315
UK317 + H2317
aft
dia
me
ter
ins
Be
arin
g
ing
Ho
us
B1
UCT200CO(CC)
UKT200H
UKT300H
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
-
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
-
Sh
EXT200
EXT300
Op
tiveen p
c ro
Clo aps tecs
tive ed
capprot
s ecDy
nam
*
rat
ing ic loa *
d
Sta
t
rat ic loa
ing d
We
igh
t
EST200
ert
UST200
Cr
C0r
[kN]
[kN]
[kg]
[mm]
43,55
43,55
43,55
43,55
52,50
71,50
71,50
81,60
52,50
52,50
52,50
52,50
57,20
81,60
81,60
93,86
57,20
57,20
66,00
93,86
93,86
113,36
62,00
62,00
72,50
104,26
104,26
122,85
66,00
66,00
83,20
113,36
113,36
132,60
29,20
29,20
29,20
29,20
32,80
44,80
44,80
51,80
32,80
32,80
32,80
32,80
40,00
51,80
51,80
60,50
40,00
40,00
49,50
60,50
60,50
76,80
45,00
45,00
54,20
68,00
68,00
86,50
49,50
49,50
63,80
76,80
76,80
96,50
3,9
3,8
3,6
4,2
4,7
6,1
6,5
7,5
4,7
4,5
4,4
5,1
6,8
7,6
7,9
9,5
6,8
7,3
7,6
9,5
9,9
13,2
6,9
7,4
8,7
11,1
11,7
16,2
7,2
7,9
11,2
12,5
13,5
19,0
55
d
60
65
70
75
INDUSTRY
4/12/08
15:49
Page 91
Take-up unit
General
Housing
T200 relubricatable
T300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200
UCT300
d
L
H
J1
J2
A
A1
L1
L2
L3
L4
L5
H1
N
N1
s1
B
235
235
282
282
312
260
260
298
298
322
312
312
345
322
322
345
345
385
347
385
432
465
432
515
465
515
184
184
230
230
255
198
198
240
240
270
255
255
290
270
270
290
290
320
290
320
355
385
355
415
385
415
26
26
30
30
32
30
30
32
32
35
32
32
35
35
35
35
35
38
35
38
45
50
45
50
50
50
165
165
204
204
228
173
173
214
214
240
228
228
260
240
240
260
260
285
260
285
320
350
320
380
350
380
70
70
102
102
110
73
73
102
102
110
110
110
120
110
110
120
120
130
120
130
140
150
140
155
150
155
51
51
60
60
66
54
54
64
64
72
66
66
75
72
72
75
75
80
75
80
90
100
90
100
100
100
79,5
79,5
94,0
94,0
104,5
83,5
83,5
98,0
98,0
107,0
104,5
104,5
110,0
107,0
107,0
110,0
110,0
127,5
112,0
127,5
152,0
165,0
152,0
187,5
165,0
187,5
21
21
30
30
32
29
29
32
32
33
32
32
34
33
33
34
34
40
34
40
44
47
44
52
47
52
140
140
174
174
192
162
162
183
183
197
192
192
210
197
197
210
210
235
212
235
267
285
267
315
285
315
121
121
160
160
175
157
157
170
170
180
175
175
200
180
180
200
200
215
200
215
230
240
230
255
240
255
32
32
42
42
46
38
38
42
42
46
46
46
48
46
46
48
48
52
48
52
60
65
60
70
65
70
111
111
150
150
160
124
124
152
152
165
160
160
175
165
165
175
175
185
175
185
210
220
210
230
220
230
41
41
53
53
57
48
48
53
53
57
57
57
59
57
57
59
59
65
59
65
70
75
70
80
75
80
70
70
98
98
106
73
73
98
98
106
106
106
115
106
106
115
115
125
115
125
140
150
140
160
150
160
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
86,0
90,0
97,0
105,0
112,0
121,0
131,0
-
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
126
UCT216
EXT216
UCT316
EXT316
UKT318H
UCT217
EXT217
UCT317
EXT317
UKT319H
UCT318
EXT318
UKT320H
UCT319
EXT319
UCT320
EXT320
UKT322H
UCT321
UCT322
UKT324H
UKT326H
UCT324
UKT328H
UCT326
UCT328
4/12/08
15:49
Page 92
SNR Industry
127
UKT200H
UKT300H
33,3
37,3
34,0
40,5
34,1
23,4
40,0
42,0
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
D1
98,0
107,9
105,1
114,0
120,0
126,5
134,5
140,5
149,0
176,1
163,0
177,0
190,0
D2
110,0
119,0
120,0
119,0
127,0
125,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
G
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
*
Z Dz
-
-
T216
T216
T316
T316
T318
T217
T217
T317
T317
T319
T318
T318
T320
T319
T319
T320
T320
T322
T321
T322
T324
T326
T324
T328
T326
T328
UC216
EX216
UC316
EX316
UK318 + H2318
UC217
EX217
UC317
EX317
UK319 + H2319
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
-
-
Cr
C0r
[kN]
[kN]
72,50
72,50
122,85
122,85
143,00
83,20
83,20
132,60
132,60
156,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
54,20
54,20
86,50
86,50
108,00
63,80
63,80
96,50
96,50
122,00
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
aft
dia
me
ter
ins
82,6
95,2
86,0
106,4
85,7
73,2
96,0
109,5
96,0
115,9
103,0
122,3
108,0
128,6
112,0
117,0
126,0
135,0
145,0
s
Be
arin
g
ing
Ho
us
B1
UCT200CO(CC)
Sh
EXT200
EXT300
ert
EST200
Op
tiveen p
Clo caprsotec
tivesed
capprote
s cDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
We
igh
t
UST200
d
[kg] [mm]
8,2
8,6
16,0
17,1
21,6
10,8
11,1
18,9
20,0
26,2
21,5
22,7
30,4
25,9
27,4
30,6
32,4
41,9
31,6
38,6
56,6
72,7
53,9
89,2
67,8
83,2
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:49
Page 93
Take-up unit
General
Housing
T200+WB relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200+WB
d
L
H
J
m
m1
A
A2
A4
L2
P
T
e
N
SW
s1
B
B1
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
317
337
337
337
337
337
429
429
429
429
429
520
520
520
520
520
520
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
199
212
212
212
212
212
212
212
212
212
212
233
233
233
233
233
233
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
166
166
166
166
166
166
166
166
166
166
192
192
192
192
192
192
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
117
127
127
127
127
127
173
173
173
173
173
219
219
219
219
219
219
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
22
22
22
22
22
22
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
47,3
45,0
51,1
55,5
47,3
45,0
51,1
55,5
47,3
45,0
51,1
55,5
47,3
47,0
52,4
55,5
47,5
48,7
48,5
52,4
55,9
50,5
52,2
52,0
56,7
60,1
52,5
55,4
53,5
59,4
62,3
54,5
60,2
55,0
62,7
64,9
56,0
367
367
367
367
367
367
367
367
367
367
367
367
367
367
367
367
368
368
368
368
368
396
396
396
396
396
490
490
490
490
490
591
591
591
591
591
590
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
95
95
95
95
95
99
99
99
99
99
108
108
108
108
108
108
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
230
230
230
230
230
300
300
300
300
300
300
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
15
15
15
15
15
15
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
[mm]
12
15
17
20
25
30
35
40
SNR Industry
128
UCT201+WB
UST201+WB
EST201+WB
EXT201+WB
UCT202+WB
UST202+WB
EST202+WB
EXT202+WB
UCT203+WB
UST203+WB
EST203+WB
EXT203+WB
UCT204+WB
UST204+WB
EST204+WB
EXT204+WB
UKT205H+WB
UCT205+WB
UST205+WB
EST205+WB
EXT205+WB
UKT206H+WB
UCT206+WB
UST206+WB
EST206+WB
EXT206+WB
UKT207H+WB
UCT207+WB
UST207+WB
EST207+WB
EXT207+WB
UKT208H+WB
UCT208+WB
UST208+WB
EST208+WB
EXT208+WB
UKT209H+WB
4/12/08
15:49
Page 94
SNR Industry
129
s
D1
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
Z
43,7
43,7
***
***
43,7
43,7
***
***
43,7
43,7
***
***
43,7
43,7
***
***
47,5
47,5
47,5
***
***
52,5
52,5
52,5
***
***
59,1
59,1
59,1
***
***
68,6
68,6
68,6
***
***
68,6
UKT200H+WB
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T204
T205
T205
T205
T205
T205
T206
T206
T206
T206
T206
T207
T207
T207
T207
T207
T208
T208
T208
T208
T208
T209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB205
WB206
WB206
WB206
WB206
WB206
WB207
WB207
WB207
WB207
WB207
WB210
WB210
WB210
WB210
WB210
WB210
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
aft
dia
me
ter
*
Dz
54,0
46,0
***
***
54,0
46,0
***
***
54,0
46,0
***
***
54,0
54,0
***
***
60,0
60,0
60,0
***
***
70,0
70,0
70,0
***
***
80,0
80,0
80,0
***
***
88,0
88,0
88,0
***
***
95,0
UCT200CO(CC)+WB
Sh
Ten
si
fra oning
me
ins
Be
arin
g
Ho
us
ing
ert
EXT200+WB
Op
tiveen p
r
Cl capsotecsed
tivo
e c pr
Dy aps otecn
rat amic
ing loa **
d
Sta
tic
rat loa
ing d
We
igh
t
EST200+WB
UST200+WB
d
[kg] [mm]
5,2
5,1
5,1
5,3
5,2
5,1
5,1
5,3
5,2
5,1
5,1
5,3
5,2
5,1
5,2
5,2
5,2
5,2
5,2
5,2
5,3
6,3
6,2
6,2
6,2
6,3
8,4
8,4
8,3
8,4
8,5
11,8
11,7
11,7
11,8
11,9
11,9
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:49
Page 95
Take-up unit
General
Housing
T200+WB relubricatable
Un
it
Sh
aft
dia
me
ter
UCT200+WB
d
L
H
J
m
m1
A
A2
A4
L2
P
T
e
N
SW
s1
B
B1
520
520
520
520
520
520
520
520
520
542
542
542
542
542
568
568
568
568
568
606
606
606
233
233
233
233
233
233
233
233
233
301
301
301
301
301
301
301
301
301
301
322
322
322
192
192
192
192
192
192
192
192
192
240
240
240
240
240
240
240
240
240
240
260
260
260
219
219
219
219
219
219
219
219
219
230
230
230
230
230
243
243
243
243
243
260
260
260
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
60,2
61,0
62,7
64,9
57,5
62,6
62,6
62,7
68,1
67,0
71,4
71,5
74,4
81,6
69,0
77,7
76,8
75,3
84,8
70,0
77,7
89,6
590
590
590
590
593
593
593
593
593
631
631
631
631
631
651
651
651
651
651
699
699
699
108
108
108
108
108
108
108
108
108
114
114
114
114
114
127
127
127
127
127
144
144
144
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
30
30
30
30
30
30
30
30
30
38
38
38
38
38
38
38
38
38
38
38
38
38
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
19
19
19
19
19
19
19
19
19
19
24
24
24
27,5
29,0
31,0
32,0
-
55,0
59,0
62,0
65,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
55,6
45,3
48,4
71,3
65,1
53,7
49,3
77,7
65,1
85,7
[mm]
45
50
55
60
65
SNR Industry
130
UCT209+WB
UST209+WB
EST209+WB
EXT209+WB
UKT210H+WB
UCT210+WB
UST210+WB
EST210+WB
EXT210+WB
UKT211H+WB
UCT211+WB
UST211+WB
EST211+WB
EXT211+WB
UKT212H+WB
UCT212+WB
UST212+WB
EST212+WB
EXT212+WB
UKT213H+WB
UCT213+WB
EXT213+WB
4/12/08
15:49
Page 96
SNR Industry
131
EXT200+WB
s
D1
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
22,2
11,8
12,0
27,7
25,4
14,9
12,0
30,9
25,4
34,1
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
82,0
-
D2
63,5
63,5
70,0
69,9
69,9
75,0
76,2
76,2
80,0
84,2
84,2
85,0
86,0
Z
68,6
68,6
***
***
74,1
74,1
74,1
***
***
75,6
75,6
75,6
***
***
88,6
88,6
88,6
***
***
88,6
88,6
***
Ten
si
fra oning
me
e
ins
Be
arin
g
Ho
us
ing
ert
EST200+WB
UKT200H+WB
*
Dz
95,0
95,0
***
***
100,0
100,0
100,0
***
***
110,0
110,0
110,0
***
***
120,0
120,0
120,0
***
***
132,0
132,0
***
T209
T209
T209
T209
T210
T210
T210
T210
T210
T211
T211
T211
T211
T211
T212
T212
T212
T212
T212
T213
T213
T213
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC211
US211
ES211
EX211
UK212 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC213
EX213
WB210
WB210
WB210
WB210
WB210
WB210
WB210
WB210
WB210
WB211
WB211
WB211
WB211
WB211
WB212
WB212
WB212
WB212
WB212
WB213
WB213
WB213
UCT200CO(CC)+WB
Op
tiveen p
r
Clo capsotectivesed
c pr
Dy aps otecnam
rat
ing ic loa **
d
Sta
tic
rat load
ing
We
igh
t
Sh
aft
dia
me
ter
UST200+WB
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
***
Cr
C0r
[kN]
[kN]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
43,55
43,55
43,55
43,55
43,55
52,50
52,50
52,50
52,50
52,50
57,20
57,20
57,20
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
29,20
29,20
29,20
29,20
29,20
32,80
32,80
32,80
32,80
32,80
40,00
40,00
40,00
d
[kg] [mm]
11,8
11,8
11,8
12,0
12,2
12,0
12,0
12,0
12,2
18,5
18,4
18,4
18,2
18,7
20,2
20,2
20,0
19,9
20,6
25,3
25,3
25,8
45
50
55
60
65
INDUSTRY
4/12/08
15:50
Page 97
Conveyor belt tensioner unit
General
Housing
SP200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCSP200
d
L
H
L1
H1
A
s1
B
B1
s
D1
D2
G
Z
Dz
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
264
274
274
274
274
274
274
274
274
274
274
320
320
320
320
320
320
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
98
98
98
98
98
98
98
98
98
98
120
120
120
120
120
120
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
225
260
260
260
260
260
260
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
61
61
61
61
61
61
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
31
31
31
31
31
31
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
48,8
48,8
***
***
48,8
48,8
***
***
48,8
48,8
***
***
48,8
48,8
***
***
48,8
48,8
48,8
***
***
58,4
58,4
58,4
***
***
58,4
58,4
58,4
***
***
75,6
75,6
75,6
***
***
75,6
60,0
60,0
***
***
60,0
60,0
***
***
60,0
60,0
***
***
60,0
60,0
***
***
60,0
60,0
60,0
***
***
80,0
80,0
80,0
***
***
80,0
80,0
80,0
***
***
100,0
100,0
100,0
***
***
100,0
[mm]
12
15
17
20
25
30
35
40
SNR Industry
132
UCSP201
USSP201
ESSP201
EXSP201
UCSP202
USSP202
ESSP202
EXSP202
UCSP203
USSP203
ESSP203
EXSP203
UCSP204
USSP204
ESSP204
EXSP204
UKSP205H
UCSP205
USSP205
ESSP205
EXSP205
UKSP206H
UCSP206
USSP206
ESSP206
EXSP206
UKSP207H
UCSP207
USSP207
ESSP207
EXSP207
UKSP208H
UCSP208
USSP208
ESSP208
EXSP208
UKSP209H
4/12/08
15:50
Page 98
SNR Industry
133
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR1
SPR2
SPR2
SPR2
SPR2
SPR2
SPR2
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR11
SPR21
SPR21
SPR21
SPR21
SPR21
SPR21
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR12
SPR22
SPR22
SPR22
SPR22
SPR22
SPR22
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR14
SPR24
SPR24
SPR24
SPR24
SPR24
SPR24
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CO
CO
***
***
CO
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
CC
CC
***
***
CC
Cr
C0r
[kN]
[kN]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
**** = must be ordered seperately
Sh
aft
dia
me
ter
*
t
Str
et
fra cher
m
(pa e *
ge ***
136
)
ins
Be
arin
g
ing
Ho
us
203-205/47
03-205/40
03-205/40
03-205/47
03-205/47
03-205/40
03-205/40
03-205/47
03-205/47
03-205/40
03-205/40
03-205/47
03-205/47
03-205/40
03-205/40
03-205/47
03-205/52
03-205/52
03-205/52
03-205/52
03-205/52
06-207/62
06-207/62
06-207/62
06-207/62
06-207/62
06-207/72
06-207/72
06-207/72
06-207/72
06-207/72
08-210/80
08-210/80
08-210/80
08-210/80
08-210/80
08-210/85
UCSP200CO(CC)
UKSP200
We
igh
EXSP200
Op
tiveen p
caprote
s cClo
tivesed
capprote
s cDy
**
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ESSP200
ert
USSP200
d
[kg] [mm]
1,7
1,6
1,6
1,8
1,7
1,6
1,6
1,8
1,7
1,6
1,6
1,8
1,7
1,6
1,7
1,7
1,7
1,7
1,7
1,7
1,8
2,0
1,9
1,9
1,9
2,0
2,1
2,1
2,0
2,1
2,2
4,3
4,2
4,2
4,2
4,3
4,3
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:50
Page 99
Conveyor belt tensioner unit
General
Housing
SP200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCSP200
d
L
H
L1
H1
A
320
320
320
320
320
320
320
320
320
120
120
120
120
120
120
120
120
120
260
260
260
260
260
260
260
260
260
61
61
61
61
61
61
61
61
61
31
31
31
31
31
31
31
31
31
s1
B
B1
s
D1
D2
G
Z
Dz
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
57,2
57,2
61,8
61,8
-
63,5
63,5
70,0
69,9
69,9
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
75,6
75,6
***
***
75,6
75,6
75,6
***
***
100,0
100,0
***
***
100,0
100,0
100,0
***
***
[mm]
45
50
SNR Industry
134
UCSP209
USSP209
ESSP209
EXSP209
UKSP210H
UCSP210
USSP210
ESSP210
EXSP210
27,5 55,0
-
4/12/08
15:50
Page 100
SNR Industry
135
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
SPR2
SPR2
SPR2
SPR2
SPR2
SPR2
SPR2
SPR2
SPR2
SPR21
SPR21
SPR21
SPR21
SPR21
SPR21
SPR21
SPR21
SPR21
SPR22
SPR22
SPR22
SPR22
SPR22
SPR22
SPR22
SPR22
SPR22
SPR24
SPR24
SPR24
SPR24
SPR24
SPR24
SPR24
SPR24
SPR24
CO
CO
***
***
CO
CO
CO
***
***
CC
CC
***
***
CC
CC
CC
***
***
aft
dia
me
ter
*
Sh
t
Str
et
fra cher
m
(pa e **
ge **
136
)
ins
Be
arin
g
ing
Ho
us
08-210/85
08-210/85
08-210/85
08-210/85
08-210/90
08-210/90
08-210/90
08-210/90
08-210/90
UCSP200CO(CC)
UKSP200H
We
igh
EXSP200
Op
tiveen pr
capotec
s Clo
s
tive ed
capprot
s ecDy
nam
**
rat
ing ic loa
d
Sta
t
rat ic loa
ing d
ESSP200
ert
USSP200
Cr
C0r
[kN]
[kN]
d
[kg] [mm]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
4,2
4,2
4,2
4,4
4,4
4,2
4,2
4,2
4,4
**** = must be ordered seperately
45
50
15:50
Page 101
Stretcher frame
General
SPR
g
sin
hou
nat
ion
SPR1+2
De
sig
Sh
aft
dia
me
ter
Housing
for
INDUSTRY
4/12/08
d
SPR1
SPR2
SPR11
SPR21
SPR12
SPR22
SPR14
SPR24
SP203-207
SP208-210
SP203-207
SP208-210
SP203-207
SP208-210
SP203-207
SP208-210
L
L1
H
H2
m
m1
190
225
190
225
190
225
190
235
180
210
180
210
180
210
180
220
50
70
50
70
48
68
48
68
100
140
100
130
103
130
130
160
65
80
140
180
80
100
75
100
80
100
SPR12+22
SNR Industry
136
4/12/08
15:50
Page 102
SNR Industry
137
SPR11+21
A
b
T
Pmax
30
40
30
40
25
35
25
35
30
40
-
5
6
-
85
105
85
105
85
105
97
111
SPR14+24
G
M12x90
M16x110
M12x90
M16x110
M12x90
M16x110
M12x100
M16x120
N
WA
11,0
14,0
10,0
12,0
11,5
14,0
18
24
18
24
18
24
18
24
INDUSTRY
4/12/08
15:50
Page 103
Cartridge unit
Housing
C200 relubricatable
C300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCC200
UCC300
d
H
[mm]
h7
12
15
17
20
25
30
SNR Industry
138
UCC201
USC201
ESC201
EXC201
UCC202
USC202
ESC202
EXC202
UCC203
USC203
ESC203
EXC203
UCC204
USC204
ESC204
EXC204
UKC205H
UKC305H
UCC205
USC205
ESC205
EXC205
UKC206H
UCC305
EXC305
UKC306H
UCC206
USC206
ESC206
EXC206
UKC207H
UCC306
EXC306
UKC307H
72
67
67
72
72
67
67
72
72
67
67
72
72
72
72
72
80
90
80
80
80
80
85
90
90
100
85
85
85
85
90
100
100
110
A
w
s1
B
B1
s
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
22
26
22
22
22
22
27
26
26
28
27
27
27
27
28
28
28
32
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
2,5
1,5
1,5
1,5
1,5
1,5
2,5
2,5
2,5
1,5
1,5
1,5
1,5
2,0
2,5
2,5
3,0
18,5
21,5
20,5
23,0
22,5
25,5
35,0
35,0
38,0
38,0
43,0
43,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,0
46,8
38,1
30,0
35,7
48,3
43,0
50,0
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,0
16,7
15,9
8,0
9,0
18,2
17,0
17,5
-
4/12/08
15:50
Page 104
SNR Industry
139
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
35,4
34,0
34,0
35,4
40,3
40,3
44,6
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,0
38,1
38,1
45,0
42,8
45,0
44,5
44,5
52,0
50,0
52,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
C204
C203
C203
C204
C204
C203
C203
C204
C204
C203
C203
C204
C204
C204
C204
C204
C205
C305
C205
C205
C205
C205
C206
C305
C305
C306
C206
C206
C206
C206
C207
C306
C306
C307
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UK305 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC305
EX305
UK306 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC306
EX306
UK307 + H2307
Cr
C0r
[kN]
[kN]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
22,36
14,00
14,00
14,00
14,00
19,50
22,36
22,36
27,00
19,50
19,50
19,50
19,50
25,70
27,00
27,00
33,50
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
11,50
7,88
7,88
7,88
7,88
11,20
11,50
11,50
15,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
19,20
aft
dia
me
ter
Sh
We
igh
ins
Be
arin
g
ing
Ho
us
D1
t
UKC200H
UKC300H
Sta
t
rat ic loa
ing d
EXC200
EXC300
ert
ESC200
Dy
n
rat amic
ing loa
d
USC200
d
[kg] [mm]
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,4
0,4
0,6
0,5
0,5
0,5
0,5
0,7
1,5
0,7
0,7
0,7
0,7
1,0
1,4
1,4
1,7
1,0
0,9
1,0
1,1
1,1
1,7
1,8
1,9
12
15
17
20
25
30
INDUSTRY
4/12/08
15:50
Page 105
Cartridge unit
General
Housing
C200 relubricatable
C300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCC200
UCC300
d
H
[mm]
h7
35
40
45
50
SNR Industry
140
UCC207
USC207
ESC207
EXC207
UKC208H
UCC307
EXC307
UKC308H
UCC208
USC208
ESC208
EXC208
UKC209H
UCC308
EXC308
UKC309H
UCC209
USC209
ESC209
EXC209
UKC210H
UCC309
EXC309
UKC310H
UCC210
USC210
ESC210
EXC210
UKC211H
UCC310
EXC310
UKC311H
90
90
90
90
100
110
110
120
100
100
100
100
110
120
120
130
110
110
110
110
120
130
130
140
120
120
120
120
125
140
140
150
A
w
s1
B
B1
s
28
28
28
28
30
32
32
34
30
30
30
30
31
34
34
38
31
31
31
31
33
38
38
40
33
33
33
33
35
40
40
44
2,0
2,0
2,0
2,0
2,0
3,0
3,0
3,0
2,0
2,0
2,0
2,0
2,0
3,0
3,0
3,5
2,0
2,0
2,0
2,0
2,0
3,5
3,5
3,5
2,0
2,0
2,0
2,0
2,5
3,5
3,5
3,5
24,5
27,5
26,0
30,0
27,5
32,0
29,0
34,0
46,0
46,0
50,0
50,0
55,0
55,0
59,0
59,0
42,9
32,0
38,9
51,1
48,0
51,6
49,2
34,0
43,7
56,3
52,0
57,1
49,2
41,2
43,7
56,3
57,0
58,7
51,6
43,5
43,7
62,7
61,0
66,6
-
17,5
8,5
9,5
18,8
19,0
18,3
19,0
9,0
11,0
21,4
19,0
19,8
19,0
10,2
11,0
21,4
22,0
19,8
19,0
10,9
11,0
24,6
22,0
24,6
-
4/12/08
15:50
Page 106
SNR Industry
141
EXC200
EXC300
D1
48,0
48,0
48,9
53,0
53,0
56,5
57,2
57,2
61,8
61,8
61,8
68,7
-
D2
55,6
55,6
58,0
55,0
58,0
60,3
60,3
65,0
63,5
65,0
63,5
63,5
70,0
70,0
70,0
69,9
69,9
75,0
76,2
75,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
C207
C207
C207
C207
C208
C307
C307
C308
C208
C208
C208
C208
C209
C308
C308
C309
C209
C209
C209
C209
C210
C309
C309
C310
C210
C210
C210
C210
C211
C310
C310
C311
UC207
US207
ES207
EX207
UK208 + H2308
UC307
EX307
UK308 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
UC308
EX308
UK309 + H2309
UC209
US209
ES209
EX209
UK210 + H2310
UC309
EX309
UK310 + H2310
UC210
US210
ES210
EX210
UK211 + H2311
UC310
EX310
UK311 + H2311
Cr
C0r
[kN]
[kN]
[kg]
25,70
25,70
25,70
25,70
29,60
33,50
33,50
40,56
29,60
29,60
29,60
29,60
31,85
40,56
40,56
53,00
31,85
31,85
31,85
31,85
35,10
53,00
53,00
62,00
35,10
35,10
35,10
35,10
43,55
62,00
62,00
71,50
15,20
15,20
15,20
15,20
18,20
19,20
19,20
24,00
18,20
18,20
18,20
18,20
20,80
24,00
24,00
31,80
20,80
20,80
20,80
20,80
23,20
31,80
31,80
37,80
23,20
23,20
23,20
23,20
29,20
37,80
37,80
44,80
1,1
1,0
1,1
1,2
1,4
1,7
1,8
2,1
1,3
1,3
1,4
1,5
1,6
2,1
2,2
3,1
1,5
1,5
1,5
1,7
2,1
2,9
3,1
3,3
1,9
1,9
1,9
2,1
2,3
3,3
3,5
4,2
aft
dia
me
ter
Sh
t
We
igh
Dy
n
rat amic
ing loa
d
Be
arin
g
Ho
us
ing
ins
ert
UKC200H
UKC300H
Sta
t
rat ic loa
ing d
ESC200
USC200
d
[mm]
35
40
45
50
INDUSTRY
4/12/08
15:50
Page 107
Cartridge unit
General
Housing
C200 relubricatable
C300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCC200
UCC300
d
H
[mm]
h7
55
60
65
70
75
SNR Industry
142
UCC211
USC211
ESC211
EXC211
UKC212H
UCC311
EXC311
UKC312H
UCC212
USC212
ESC212
EXC212
UKC213H
UCC312
EXC312
UKC313H
UCC213
EXC213
UKC215H
UCC313
EXC313
UKC315H
UCC214
EXC214
UKC216H
UCC314
EXC314
UKC316H
UCC215
EXC215
UCC315
EXC315
UKC317H
125
125
125
125
130
150
150
160
130
130
130
130
140
160
160
170
140
140
160
170
170
190
150
150
170
180
180
200
160
160
190
190
215
A
w
s1
B
35
35
35
35
38
44
44
46
38
38
38
38
40
46
46
50
40
40
44
50
50
55
44
44
48
52
52
60
44
44
55
55
64
2,5
2,5
2,5
2,5
2,5
3,5
3,5
3,5
2,5
2,5
2,5
2,5
2,5
3,5
3,5
3,5
2,5
2,5
2,0
3,5
3,5
4,0
2,0
2,0
2,0
4,0
4,0
4,0
2,0
2,0
4,0
4,0
4,0
31,0
36,5
32,0
38,5
35,5
42,5
39,0
44,5
48,0
62,0
62,0
65,0
65,0
73,0
73,0
78,0
78,0
82,0
B1
55,6
45,3
48,4
71,3
66,0
73,0
65,1
53,7
49,3
77,7
71,0
79,4
65,1
85,7
75,0
85,7
74,6
85,7
78,0
92,1
77,8
92,1
82,0
100,0
-
s
22,2
11,8
12,0
27,7
25,0
27,8
25,4
14,9
12,0
30,9
26,0
31,0
25,4
34,1
30,0
32,5
30,2
34,1
33,0
34,2
33,3
37,3
32,0
37,3
-
4/12/08
15:50
Page 108
SNR Industry
143
76,2
76,2
80,0
83,0
80,0
84,2
84,2
85,0
89,0
85,0
86,0
98,0
97,0
98,0
96,8
105,0
102,0
105,0
102,0
113,0
110,0
G
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M10x1
M6x1
M6x1
M6x1
M10x1
M10x1
M10x1
M6x1
M6x1
M10x1
M10x1
M10x1
C211
C211
C211
C211
C212
C311
C311
C312
C212
C212
C212
C212
C213
C312
C312
C313
C213
C213
C215
C313
C313
C315
C214
C214
C216
C314
C314
C316
C215
C215
C315
C315
C317
UC211
US211
ES211
EX211
UK212 + H2312
UC311
EX311
UK312 + H2312
UC212
US212
ES212
EX212
UK213 + H2313
UC312
EX312
UK313 + H2313
UC213
EX213
UK215 + H2315
UC313
EX313
UK315 + H2315
UC214
EX214
UK216 + H2316
UC314
EX314
UK316 + H2316
UC215
EX215
UC315
EX315
UK317 + H2317
Cr
C0r
[kN]
[kN]
[kg]
43,55
43,55
43,55
43,55
52,50
71,50
71,50
81,60
52,50
52,50
52,50
52,50
57,20
81,60
81,60
93,86
57,20
57,20
66,00
93,86
93,86
113,36
62,00
62,00
72,50
104,26
104,26
122,85
66,00
66,00
113,36
113,36
132,60
29,20
29,20
29,20
29,20
32,80
44,80
44,80
51,80
32,80
32,80
32,80
32,80
40,00
51,80
51,80
60,50
40,00
40,00
49,50
60,50
60,50
76,80
45,00
45,00
54,20
68,00
68,00
86,50
49,50
49,50
76,80
76,80
96,50
2,3
2,2
2,0
2,5
2,7
3,9
4,3
4,6
2,7
2,5
2,4
3,1
3,2
4,7
5,0
5,7
3,2
3,7
4,0
5,7
6,1
9,0
5,3
5,8
6,8
8,0
8,5
9,8
5,6
6,2
8,3
9,3
11,4
aft
dia
me
ter
Sh
t
UKC300H
Dy
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
ins
ert
69,0
69,0
74,9
74,9
74,9
81,0
82,0
87,5
86,5
94,0
91,5
100,5
-
D2
Be
arin
g
ing
Ho
us
D1
UKC200H
EXC200
EXC300
We
igh
ESC200
USC200
d
[mm]
55
60
65
70
75
INDUSTRY
4/12/08
15:50
Page 109
Cartridge unit
General
Housing
C200 relubricatable
C300 relubricatable
Un
it
Sh
aft
dia
me
ter
UCC200
UCC300
d
H
[mm]
h7
80
85
90
95
100
105
110
115
120
125
130
140
SNR Industry
144
UCC216
EXC216
UCC316
EXC316
UKC318H
UCC317
EXC317
UKC319H
UCC318
EXC318
UKC320H
UCC319
EXC319
UCC320
EXC320
UKC322H
UCC321
UCC322
UKC324H
UKC326H
UCC324
UKC328H
UCC326
UCC328
170
170
200
200
225
215
215
240
225
225
260
240
240
260
260
300
260
300
320
340
320
360
340
360
A
w
s1
B
48
48
60
60
66
64
64
72
66
66
75
72
72
75
75
80
75
80
90
100
90
100
100
100
2,0
2,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
5,0
4,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
48,0
52,0
54,0
61,0
65,0
69,0
73,0
-
86,0
90,0
97,0
105,0
112,0
121,0
131,0
-
B1
82,6
95,2
86,0
106,4
96,0
109,5
96,0
115,9
103,0
122,3
108,0
128,6
112,0
117,0
126,0
135,0
145,0
s
33,3
37,3
34,0
40,5
40,0
42,0
40,0
43,6
41,0
46,8
42,0
50,0
44,0
46,0
51,0
54,0
59,0
4/12/08
15:50
Page 110
SNR Industry
145
110,0
119,0
120,0
127,0
125,0
133,0
130,0
140,0
146,0
145,0
155,0
165,0
180,0
-
G
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
C216
C216
C316
C316
C318
C317
C317
C319
C318
C318
C320
C319
C319
C320
C320
C322
C321
C322
C324
C326
C324
C328
C326
C328
UC216
EX216
UC316
EX316
UK318 + H2318
UC317
EX317
UK319 + H2319
UC318
EX318
UK320 + H2320
UC319
EX319
UC320
EX320
UK322 + H2322
UC321
UC322
UK324 + H2324
UK326 + H2326
UC324
UK328 + H2328
UC326
UC328
Cr
C0r
[kN]
[kN]
[kg]
54,20
54,20
86,50
86,50
108,00
96,50
96,50
122,00
108,00
108,00
140,00
122,00
122,00
140,00
140,00
178,00
155,00
178,00
208,00
242,00
208,00
272,00
242,00
272,00
6,4
6,7
9,6
10,7
12,9
11,3
12,5
16,2
12,9
14,1
19,0
15,9
17,4
19,2
21,0
31,6
20,2
28,3
36,2
43,9
33,5
51,5
39,0
45,5
72,50
72,50
122,85
122,85
143,00
132,60
132,60
156,00
143,00
143,00
171,60
156,00
156,00
171,60
171,60
205,00
182,00
205,00
228,00
252,00
228,00
275,00
252,00
275,00
aft
dia
me
ter
Sh
We
igh
t
UKC300H
Dy
n
rat amic
ing loa
d
ins
ert
98,0
107,9
114,0
120,0
126,5
134,5
140,5
149,0
163,0
177,0
190,0
D2
Be
arin
g
ing
Ho
us
D1
UKC200H
EXC200
EXC300
Sta
t
rat ic loa
ing d
ESC200
USC200
d
[mm]
80
85
90
95
100
105
110
115
120
125
130
140
INDUSTRY
4/12/08
15:50
Page 111
Hanger unit
General
Housing
EHE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCEHE200
d
H
[mm]
12
15
17
20
25
30
35
40
SNR Industry
146
L
H2
A
A1
L4
E
G1
s1
B
B1
s
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
91
99
99
99
99
99
114
114
114
114
114
122
122
122
122
122
135
135
135
135
135
145
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
28
28
28
28
28
32
32
32
32
32
32
32
32
32
32
36
36
36
36
36
40
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
22
22
22
22
22
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
M24
18,5
20,5
22,5
24,5
26,0
35,0
38,0
43,0
46,0
50,0
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
22,0
28,6
43,5
31,0
25,0
30,9
43,5
34,0
27,0
30,9
44,3
38,1
30,0
35,7
48,3
42,9
32,0
38,9
51,1
49,2
34,0
43,7
56,3
-
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
6,0
6,5
17,0
12,7
7,0
7,5
17,0
14,3
7,5
7,5
17,4
15,9
8,0
9,0
18,2
17,5
8,5
9,5
18,8
19,0
9,0
11,0
21,4
-
-0,5
UCEHE201
USEHE201
ESEHE201
EXEHE201
UCEHE202
USEHE202
ESEHE202
EXEHE202
UCEHE203
USEHE203
ESEHE203
EXEHE203
UCEHE204
USEHE204
ESEHE204
EXEHE204
UKEHE205H
UCEHE205
USEHE205
ESEHE205
EXEHE205
UKEHE206H
UCEHE206
USEHE206
ESEHE206
EXEHE206
UKEHE207H
UCEHE207
USEHE207
ESEHE207
EXEHE207
UKEHE208H
UCEHE208
USEHE208
ESEHE208
EXEHE208
UKEHE209H
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
64
64
64
64
64
72
72
72
72
72
76
76
76
76
76
85
85
85
85
85
90
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
70
70
70
70
70
85
85
85
85
85
90
90
90
90
90
100
100
100
100
100
110
4/12/08
15:51
Page 112
SNR Industry
147
D1
29,0
24,6
29,0
24,6
29,0
24,6
29,0
29,0
34,0
34,0
40,3
40,3
48,0
48,0
53,0
53,0
-
D2
28,6
33,3
28,6
33,3
28,6
33,3
33,3
33,3
38,0
38,1
38,1
45,0
44,5
44,5
52,0
55,6
55,6
58,0
60,3
60,3
65,0
G
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
M6x1
M6x1
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
EHE204
EHE203
EHE203
EHE204
EHE204
EHE203
EHE203
EHE204
EHE204
EHE203
EHE203
EHE204
EHE204
EHE204
EHE204
EHE204
EHE205
EHE205
EHE205
EHE205
EHE205
EHE206
EHE206
EHE206
EHE206
EHE206
EHE207
EHE207
EHE207
EHE207
EHE207
EHE208
EHE208
EHE208
EHE208
EHE208
EHE209
UC201
US201
ES201
EX201
UC202
US202
ES202
EX202
UC203
US203
ES203
EX203
UC204
US204
ES204
EX204
UK205 + H2305
UC205
US205
ES205
EX205
UK206 + H2306
UC206
US206
ES206
EX206
UK207 + H2307
UC207
US207
ES207
EX207
UK208 + H2308
UC208
US208
ES208
EX208
UK209 + H2309
Cr
C0r
[kN]
[kN]
[kg]
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
9,55
9,55
12,80
12,80
12,80
12,80
12,80
14,00
14,00
14,00
14,00
14,00
19,50
19,50
19,50
19,50
19,50
25,70
25,70
25,70
25,70
25,70
29,60
29,60
29,60
29,60
29,60
31,85
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
4,78
4,78
6,65
6,65
6,65
6,65
6,65
7,88
7,88
7,88
7,88
7,88
11,20
11,20
11,20
11,20
11,20
15,20
15,20
15,20
15,20
15,20
18,20
18,20
18,20
18,20
18,20
20,80
0,8
0,4
0,5
0,8
0,8
0,4
0,5
0,8
0,5
0,5
0,5
0,8
0,7
0,7
0,7
0,8
1,2
1,2
1,1
1,1
1,2
1,4
1,3
1,3
1,3
1,4
1,6
1,6
1,5
1,6
1,7
1,9
1,8
1,8
1,9
2,0
2,0
Sh
We
igh
t
aft
dia
me
ter
UKEHE200H
Sta
t
rat ic loa
ing d
ins
Be
arin
g
Ho
us
ing
ert
EXEHE200
Dy
n
rat amic
ing loa
d
ESEHE200
USEHE200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:51
Page 113
Hanger unit
General
Housing
EHE200 relubricatable
Un
it
Sh
aft
dia
me
ter
UCEHE200
d
H
[mm]
45
50
SNR Industry
148
L
H2
A
A1
L4
E
G1
s1
B
B1
s
145
145
145
145
145
145
145
145
145
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
46
46
46
46
46
24
24
24
24
24
24
24
24
24
M24
M24
M24
M24
M24
M24
M24
M24
M24
27,5
-
55,0
-
49,2
41,2
43,7
56,3
51,6
43,5
43,7
62,7
19,0
10,2
11,0
21,4
19,0
10,9
11,0
24,6
-0,5
UCEHE209
USEHE209
ESEHE209
EXEHE209
UKEHE210H
UCEHE210
USEHE210
ESEHE210
EXEHE210
90
90
90
90
90
90
90
90
90
110
110
110
110
110
110
110
110
110
4/12/08
15:51
Page 114
SNR Industry
149
63,5
63,5
70,0
69,9
69,9
G
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
R1/8"
EHE209
EHE209
EHE209
EHE209
EHE210
EHE210
EHE210
EHE210
EHE210
UC209
US209
ES209
EX209
UK210 + H2310
UC210
US210
ES210
EX210
Sh
We
igh
t
aft
dia
me
ter
UKEHE200H
Sta
t
rat ic loa
ing d
ins
ert
57,2
57,2
61,8
61,8
-
D2
Be
arin
g
ing
Ho
us
D1
Dy
n
rat amic
ing loa
d
EXEHE200
ESEHE200
USEHE200
Cr
C0r
[kN]
[kN]
[kg]
[mm]
31,85
31,85
31,85
31,85
35,10
35,10
35,10
35,10
35,10
20,80
20,80
20,80
20,80
23,20
23,20
23,20
23,20
23,20
1,9
1,9
1,9
2,1
2,2
2,0
2,0
2,0
2,2
45
d
50
INDUSTRY
4/12/08
15:51
Page 115
Pillow block unit
General
PP200
Un
it
Sh
aft
dia
me
ter
Housing
d
L
H
H1
H2
A
A1
85,7
85,7
85,7
85,7
85,7
85,7
98,4
98,4
108,0
108,0
117,5
117,5
128,6
128,6
22,2
22,2
22,2
22,2
22,2
22,2
25,4
25,4
28,6
28,6
33,3
33,3
39,7
39,7
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,4
2,8
2,8
3,6
3,6
4,4
4,4
43,2
43,2
43,2
43,2
43,2
43,2
49,9
49,9
55,8
55,8
65,7
65,7
77,5
77,5
25,4
25,4
25,4
25,4
25,4
25,4
31,7
31,7
31,7
31,7
37,5
37,5
41,0
41,0
15,9
15,9
15,9
15,9
15,9
15,9
21,6
21,6
21,6
21,6
25,5
25,5
28,4
28,4
J
N
B1
s
68
68
68
68
68
68
76
76
86
86
95
95
106
106
9
9
9
9
9
9
9
9
11
11
11
11
11
11
22,0
28,6
22,0
28,6
22,0
28,6
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
6,0
6,5
6,0
6,5
6,0
6,5
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
[mm]
12
15
17
20
25
30
35
SNR Industry
150
USPP201
ESPP201
USPP202
ESPP202
USPP203
ESPP203
USPP204
ESPP204
USPP205
ESPP205
USPP206
ESPP206
USPP207
ESPP207
4/12/08
15:51
Page 116
SNR Industry
151
D2
28,6
28,6
28,6
33,3
38,1
44,5
55,6
PP203
PP203
PP203
PP203
PP203
PP203
PP204
PP204
PP205
PP205
PP206
PP206
PP207
PP207
US201
ES201
US202
ES202
US203
ES203
US204
ES204
US205
ES205
US206
ES206
US207
ES207
Cr
C0r
[kN]
[kN]
[kg]
9,55
9,55
9,55
9,55
9,55
9,55
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
4,78
4,78
4,78
4,78
4,78
4,78
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,3
0,4
0,4
0,6
0,6
0,9
1,0
aft
dia
me
ter
Sh
t
We
igh
Dy
n
rat amic
ing loa
d
ert
ins
24,6
24,6
24,6
29,0
34,0
40,3
48,0
-
Be
arin
g
ing
D1
Sta
t
rat ic loa
ing d
ESPP200
USPP200
Ho
us
d
[mm]
12
15
17
20
25
30
35
INDUSTRY
4/12/08
15:51
Page 117
Flanged unit
General
Housing
PF200
PF208...212
Un
it
Sh
aft
dia
me
ter
PF203...207
d
H
J
J2
A
A1
N
B1
s
81,0
81,0
81,0
81,0
81,0
81,0
90,5
90,5
95,2
95,2
112,7
112,7
122,2
122,2
147,8
147,8
149,2
149,2
155,6
155,6
166,6
166,6
176,2
176,2
63,5
63,5
63,5
63,5
63,5
63,5
71,5
71,5
76,0
76,0
90,5
90,5
100,0
100,0
119,0
119,0
120,5
120,5
127,0
127,0
138,0
138,0
147,6
147,6
49,0
49,0
49,0
49,0
49,0
49,0
55,0
55,0
60,0
60,0
71,0
71,0
81,0
81,0
91,0
91,0
97,0
97,0
102,0
102,0
113,0
113,0
122,0
122,0
6,7
6,7
6,7
6,7
6,7
6,7
7,7
7,7
8,7
8,7
9,0
9,0
10,0
10,0
10,0
10,0
10,0
10,0
10,5
10,5
10,7
10,7
11,9
11,9
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
5,0
5,0
5,0
5,0
7,0
7,0
7,0
7,0
8,0
8,0
8,0
8,0
8,0
8,0
7,1
7,1
7,1
7,1
7,1
7,1
8,7
8,7
8,7
8,7
10,5
10,5
10,5
10,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
22,0
28,6
22,0
28,6
22,0
28,6
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
34,0
43,7
41,2
43,7
43,5
43,7
45,3
48,4
53,7
49,3
6,0
6,5
6,0
6,5
6,0
6,5
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
9,0
11,0
10,2
11,0
10,9
11,0
11,8
12,0
14,9
12,0
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
SNR Industry
152
USPF201
ESPF201
USPF202
ESPF202
USPF203
ESPF203
USPF204
ESPF204
USPF205
ESPF205
USPF206
ESPF206
USPF207
ESPF207
USPF208
ESPF208
USPF209
ESPF209
USPF210
ESPF210
USPF211
ESPF211
USPF212
ESPF212
4/12/08
15:51
Page 118
SNR Industry
153
D2
28,6
28,6
28,6
33,3
38,1
44,5
55,6
60,3
63,5
69,9
76,2
84,2
PF203
PF203
PF203
PF203
PF203
PF203
PF204
PF204
PF205
PF205
PF206
PF206
PF207
PF207
PF208
PF208
PF209
PF209
PF210
PF210
PF211
PF211
PF212
PF212
US201
ES201
US202
ES202
US203
ES203
US204
ES204
US205
ES205
US206
ES206
US207
ES207
US208
ES208
US209
ES209
US210
ES210
US211
ES211
US212
ES212
Cr
C0r
[kN]
[kN]
[kg]
9,55
9,55
9,55
9,55
9,55
9,55
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
29,60
29,60
31,85
31,85
35,10
35,10
43,55
43,55
52,50
52,50
4,78
4,78
4,78
4,78
4,78
4,78
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
18,20
18,20
20,80
20,80
23,20
23,20
29,20
29,20
32,80
32,80
0,2
0,2
0,2
0,2
0,2
0,2
0,3
0,3
0,4
0,4
0,7
0,7
0,9
1,0
1,5
1,6
1,7
1,7
1,8
1,8
2,2
2,0
2,4
2,3
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
ins
ert
24,6
24,6
24,6
29,0
34,0
40,3
48,0
53,0
57,2
61,8
69,0
74,9
-
Be
arin
g
ing
D1
Dy
n
rat amic
ing loa
d
ESPF200
USPF200
Ho
us
d
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
INDUSTRY
4/12/08
15:51
Page 119
Flanged unit
General
PFL200
Un
it
Sh
aft
dia
me
ter
Housing
d
L
H
J
J2
A
A1
N
B1
58,7
58,7
58,7
58,7
58,7
58,7
66,7
66,7
71,0
71,0
84,0
84,0
93,7
93,7
100,0
100,0
81,0
81,0
81,0
81,0
81,0
81,0
90,5
90,5
95,2
95,2
112,7
112,7
123,0
123,0
151,0
151,0
63,5
63,5
63,5
63,5
63,5
63,5
71,5
71,5
76,2
76,2
90,5
90,5
100,0
100,0
119,0
119,0
49,0
49,0
49,0
49,0
49,0
49,0
55,0
55,0
60,0
60,0
71,0
71,0
81,0
81,0
91,0
91,0
6,7
6,7
6,7
6,7
6,7
6,7
7,7
7,7
8,7
8,7
9,0
9,0
10,5
10,5
11,5
11,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
5,0
5,0
5,0
5,0
7,0
7,0
7,1
7,1
7,1
7,1
7,1
7,1
8,7
8,7
8,7
8,7
10,5
10,5
10,5
10,5
13,5
13,5
22,0
28,6
22,0
28,6
22,0
28,6
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
34,0
43,7
[mm]
12
15
17
20
25
30
35
40
SNR Industry
154
USPFL201
ESPFL201
USPFL202
ESPFL202
USPFL203
ESPFL203
USPFL204
ESPFL204
USPFL205
ESPFL205
USPFL206
ESPFL206
USPFL207
ESPFL207
USPFL208
ESPFL208
4/12/08
15:51
Page 120
SNR Industry
155
USPFL200
s
6,0
6,5
6,0
6,5
6,0
6,5
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
9,0
11,0
D1
24,6
24,6
24,6
29,0
34,0
40,3
48,0
53,0
-
D2
28,6
28,6
28,6
33,3
38,1
44,5
55,6
60,3
PFL203
PFL203
PFL203
PFL203
PFL203
PFL203
PFL204
PFL204
PFL205
PFL205
PFL206
PFL206
PFL207
PFL207
PFL208
PFL208
US201
ES201
US202
ES202
US203
ES203
US204
ES204
US205
ES205
US206
ES206
US207
ES207
US208
ES208
Cr
C0r
[kN]
[kN]
[kg]
9,55
9,55
9,55
9,55
9,55
9,55
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
29,60
29,60
4,78
4,78
4,78
4,78
4,78
4,78
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
18,20
18,20
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,3
0,4
0,4
0,6
0,6
0,9
1,0
1,1
1,2
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
Dy
n
rat amic
ing loa
d
ins
Be
arin
g
Ho
us
ing
ert
ESPFL200
d
[mm]
12
15
17
20
25
30
35
40
INDUSTRY
4/12/08
15:51
Page 121
Flanged unit
General
PFT200
Sh
aft
dia
me
ter
Un
it
Housing
d
H
H2
J
J2
A
A1
N
B1
33,3
33,3
34,2
34,2
40,2
40,2
44,2
44,2
90,5
90,5
95,2
95,2
112,7
112,7
122,2
122,2
71,5
71,5
76,0
76,0
90,5
90,5
100,0
100,0
55,0
55,0
60,0
60,0
71,0
71,0
81,0
81,0
7,2
7,2
8,7
8,7
10,5
10,5
10,5
10,5
4,0
4,0
4,0
4,0
5,0
5,0
5,0
5,0
8,7
8,7
8,7
8,7
10,5
10,5
10,5
10,5
25,0
30,9
27,0
30,9
30,0
35,7
32,0
38,9
[mm]
20
25
30
35
SNR Industry
156
USPFT204
ESPFT204
USPFT205
ESPFT205
USPFT206
ESPFT206
USPFT207
ESPFT207
4/12/08
15:51
Page 122
SNR Industry
157
29,0
34,0
40,3
48,0
-
D2
33,3
38,1
44,5
55,6
PFT204
PFT204
PFT205
PFT205
PFT206
PFT206
PFT207
PFT207
US204
ES204
US205
ES205
US206
ES206
US207
ES207
Cr
C0r
[kN]
[kN]
[kg]
12,80
12,80
14,00
14,00
19,50
19,50
25,70
25,70
6,65
6,65
7,88
7,88
11,20
11,20
15,20
15,20
0,2
0,3
0,4
0,4
0,6
0,6
0,9
1,0
aft
dia
me
ter
Sh
t
We
igh
Dy
n
rat amic
ing loa
d
ins
ert
7,0
7,5
7,5
7,5
8,0
9,0
8,5
9,5
D1
Be
arin
g
ing
Ho
us
s
Sta
t
rat ic loa
ing d
ESPFT200
USPFT200
d
[mm]
20
25
30
35
INDUSTRY
4/12/08
15:51
Page 123
Take-up unit
General
PFE200
Un
it
Sh
aft
dia
me
ter
Housing
d
L
H
J
A
A1
A2
e
N
N1
T
B1
s
203,2
203,2
203,2
203,2
104,8
104,8
114,3
114,3
80,2
80,2
89,2
89,2
19,0
19,0
21,1
21,1
23,4
23,4
23,4
23,4
29,8
33,7
34,1
38,8
10,3
10,3
12,1
12,1
8,7
8,7
8,7
8,7
48,5
48,5
48,5
48,5
2,0
2,0
2,5
2,5
27,0
30,9
30,0
35,7
7,5
7,5
8,0
9,0
[mm]
25
30
SNR Industry
158
USPFE205
ESPFE205
USPFE206
ESPFE206
4/12/08
15:51
Page 124
SNR Industry
159
D2
38,1
44,5
PFE205
PFE205
PFE206
PFE206
US205
ES205
US206
ES206
Cr
C0r
[kN]
[kN]
[kg]
14,00
14,00
19,50
19,50
7,88
7,88
11,20
11,20
0,6
0,6
0,8
0,9
aft
dia
me
ter
Sh
t
We
igh
Sta
t
rat ic loa
ing d
ins
ert
34,0
40,3
-
Be
arin
g
ing
D1
Dy
n
rat amic
ing loa
d
ESPFE200
USPFE200
Ho
us
d
[mm]
25
30
15:51
Page 125
Bearing insert
General
Sh
aft
dia
me
ter
Ins
ert
Bearing insert with set screws
d
UC200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
We
igh
t
Sh
aft
dia
me
ter
INDUSTRY
4/12/08
D
C
B1
smax
D1
H1
m
G
a*
e1
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
UC201
UC202
UC203
UC204
UC205
UC206
UC207
UC208
UC209
UC210
UC211
UC212
UC213
UC214
UC215
UC216
UC217
UC218
47,0
47,0
47,0
47,0
52,0
62,0
72,0
80,0
85,0
90,0
100,0
110,0
120,0
125,0
130,0
140,0
150,0
160,0
16,0
16,0
16,0
16,0
17,0
19,0
20,0
21,0
22,0
23,0
25,0
27,0
28,0
30,0
30,0
33,0
35,0
37,0
31,0
31,0
31,0
31,0
34,0
38,1
42,9
49,2
49,2
51,6
55,6
65,1
65,1
74,6
77,8
82,6
85,7
96,0
* width across flats (hexagon socket)
SNR Industry
160
12,7 29,0
12,7 29,0
12,7 29,0
12,7 29,0
14,3 34,0
15,9 40,3
17,5 48,0
19,0 53,0
19,0 57,2
19,0 61,8
22,2 69,0
25,4 74,9
25,4 82,0
30,2 86,5
33,3 91,5
33,3 98,0
34,1 105,1
39,7 111,0
4,4
4,4
4,4
4,4
4,3
5,0
5,8
6,3
6,8
6,5
7,2
8,2
8,0
9,0
9,0
10,3
11,0
12,0
4,7
4,7
4,7
4,7
5,5
5,5
6,5
8,0
8,0
9,0
9,0
10,5
12,0
12,0
12,0
14,0
14,0
14,0
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M10x1,25
M10x1,25
M10x1,25
M12x1,25
M12x1,25
M12x1,25
M12x1,25
M12x1,25
M12x1,25
3,0
3,0
3,0
3,0
3,0
3,0
4,0
4,0
4,0
5,0
5,0
5,0
6,0
6,0
6,0
6,0
6,0
6,0
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,5
2,0
2,0
2,0
2,0
2,0
Cr
C0r
[kN]
[kN]
12,80
12,80
12,80
12,80
14,00
19,50
25,70
29,60
31,85
35,10
43,55
52,50
57,20
62,00
66,00
72,50
83,20
96,00
6,65
6,65
6,65
6,65
7,88
11,20
15,20
18,20
20,80
23,20
29,20
32,80
40,00
45,00
49,50
54,20
63,80
71,50
d
[kg] [mm]
0,21
0,20
0,18
0,17
0,21
0,32
0,47
0,64
0,68
0,80
1,12
1,53
1,86
2,05
2,21
2,79
3,38
4,45
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
4/12/08
15:51
Page 126
SNR Industry
Bearing insert
161
d
US200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
We
igh
t
Sh
aft
dia
me
ter
Sh
aft
dia
me
ter
Ins
ert
D
C
B1
smax
D1
H1
m
G
a*
e1
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
US201
US202
US203
US204
US205
US206
US207
US208
US209
US210
US211
US212
40,0
40,0
40,0
47,0
52,0
62,0
72,0
80,0
85,0
90,0
100,0
110,0
12,0
12,0
12,0
14,0
15,0
16,0
17,0
18,0
19,0
20,0
23,0
24,0
22,0
22,0
22,0
25,0
27,0
30,0
32,0
34,0
41,2
43,5
45,3
53,7
6,0
6,0
6,0
7,0
7,5
8,0
8,5
9,0
10,2
10,9
11,8
14,9
24,6
24,6
24,6
29,0
34,0
40,3
48,0
53,0
57,2
61,8
69,0
74,9
3,6
3,6
3,6
4,0
4,3
5,0
5,7
6,2
6,5
6,5
7,2
8,0
4,0
4,0
4,0
5,0
5,5
6,0
6,5
7,0
8,2
9,2
9,8
9,8
M5x0,8
M5x0,8
M5x0,8
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M10x1,25
M10x1,25
2,5
2,5
2,5
3,0
3,0
3,0
3,0
4,0
4,0
4,0
5,0
5,0
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
Cr
C0r
[kN]
[kN]
[kg] [mm]
d
9,55
9,55
9,55
12,80
14,00
19,50
25,70
29,60
31,85
35,10
43,55
52,50
4,78
4,78
4,78
6,65
7,88
11,20
15,20
18,20
20,80
23,20
29,20
32,80
0,09
0,08
0,10
0,13
0,17
0,27
0,42
0,60
0,65
0,76
1,07
1,30
12
15
17
20
25
30
35
40
45
50
55
60
15:51
Page 127
Bearing insert
General
d
...G2
D
C
B1
J2
B
smax
D2
H1
m
G
a*
e1
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
ES201 40
ES202 40
ES203 40
ES204 47
ES205 52
ES206 62
ES207 72
ES208 80
ES209 85
ES210 90
ES211 100
ES212 110
12
12
12
14
15
16
17
18
19
20
24
24
19,1
19,1
19,1
21,4
21,4
23,8
25,4
30,2
30,2
30,2
32,5
33,4
SNR Industry
162
13,5
13,5
13,5
13,5
13,5
15,9
17,5
18,3
18,3
18,3
20,7
22,3
28,6
28,6
28,6
30,9
30,9
35,7
38,9
43,7
43,7
43,7
48,4
49,3
6,5
6,5
6,5
7,5
7,5
9,0
9,5
11,0
11,0
11,0
12,0
12,0
28,6
28,6
28,6
33,3
38,1
44,5
55,6
60,3
63,5
69,9
76,2
84,2
3,6
3,6
3,6
4,0
4,3
5,0
5,7
6,2
6,5
6,5
7,2
8,0
5,0
5,0
5,0
5,0
5,0
6,0
6,5
6,5
6,5
6,5
8,0
8,0
M6x1
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M8x1
M8x1
M10x1,25
M10x1,25
3
3
3
3
3
3
4
4
4
4
5
5
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
t
Sha
ft d
iam
ete
r
ES200 relubricatable
We
igh
Sha
ft d
iam
ete
r
Ins
ert
Bearing insert with eccentric locking collar
Dy
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
INDUSTRY
4/12/08
Cr
C0r
[kN]
[kN]
[kg]
[mm]
d
9,55
9,55
9,55
12,80
14,00
19,50
25,70
29,60
31,85
35,10
43,55
52,50
4,78
4,78
4,78
6,65
7,88
11,20
15,20
18,20
20,80
23,20
29,20
32,80
0,14
0,13
0,13
0,15
0,19
0,33
0,50
0,65
0,69
0,80
0,87
1,20
12
15
17
20
25
30
35
40
45
50
55
60
4/12/08
15:51
Page 128
SNR Industry
Bearing insert
163
d
...G2
EX200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
Sha
ft d
iam
ete
r
Ins
ert
D
C
B1
J2
B
smax
D2
H1
m
G
a*
e1
[mm]
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
EX201
EX202
EX203
EX204
EX205
EX206
EX207
EX208
EX209
EX210
EX211
EX212
EX213
EX214
EX215
EX216
EX217
EX218
47
47
47
47
52
62
72
80
85
90
100
110
120
125
130
140
150
160
16
16
16
16
17
19
20
21
22
23
25
27
28
30
30
33
35
37
34,0
34,0
34,0
34,0
34,8
36,4
37,6
42,8
42,8
49,2
55,4
61,8
68,2
68,2
74,6
74,6
53,2
55,0
13,5
13,5
13,5
13,5
13,5
15,9
17,5
18,3
18,3
18,3
20,7
22,3
23,5
23,5
23,9
27,0
27,0
24,0
43,5
43,5
43,5
43,5
44,3
48,3
51,1
56,3
56,3
62,7
71,3
77,7
85,7
85,7
92,1
95,2
73,2
72,5
17,0
17,0
17,0
17,0
17,4
18,2
18,8
21,4
21,4
24,6
27,7
30,9
34,1
34,1
37,3
37,3
23,4
24,5
33,3 4,4
5,0
33,3 4,4
5,0
33,3 4,4
5,0
33,3 4,4
5,0
38,1 4,3
5,0
44,5 5,0
6,0
55,6 5,8
6,5
60,3 6,3
6,5
63,5 6,8
6,5
69,9 6,5
6,5
76,2 7,2
8,0
84,2 8,2
8,0
86,0 8,0
8,5
96,8 9,0
8,5
102,0 9,0
8,5
110,0 10,3 10,3
119,0 11,0 10,0
120,0 12,0 9,5
M6x1
M6x1
M6x1
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M8x1
M10x1,25
M10x1,25
M10x1,25
M10x1,25
M10x1,25
M12x1,25
M12x1,25
M12x1,25
3
3
3
3
3
3
4
4
4
4
5
5
5
5
5
6
6
6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,5
1,5
1,5
2,0
2,0
2,0
2,0
2,0
Cr
C0r
d
[kN]
[kN] [kg] [mm]
12,80
12,80
12,80
12,80
14,00
19,50
25,70
29,60
31,85
35,10
43,55
52,50
57,20
62,00
66,00
72,50
83,20
96,00
6,65
6,65
6,65
6,65
7,88
11,20
15,20
18,20
20,80
23,20
29,20
32,80
40,00
45,00
49,50
54,20
63,80
71,50
0,29
0,27
0,25
0,22
0,25
0,41
0,60
0,78
0,87
1,01
1,39
1,87
2,41
2,57
2,84
3,12
3,72
4,90
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
INDUSTRY
4/12/08
15:51
Page 129
Bearing insert
General
Bearing insert with adapter
sleeve UK200+H relubrica-
d
D C B1
c
B
d1
D1
D2
H1
[mm]
20
25
30
35
40
45
50
55
60
65
70
75
80
UK205+H 52
UK206+H 62
UK207+H 72
UK208+H 80
UK209+H 85
UK210+H 90
UK211+H 100
UK212+H 110
UK213+H 120
UK215+H 130
UK216+H 140
UK217+H 150
UK218+H 160
17
19
20
21
22
23
25
27
28
30
33
35
37
21
25
27
29
30
31
33
36
36
41
44
44
48
8,0
8,0
9,0
10,0
11,0
12,0
12,5
13,0
14,0
15,0
17,0
18,0
18,0
35
38
43
46
50
55
59
62
65
73
78
82
86
25 34,0 38
4,3
30 40,3 45
5,0
35 48,0 52
5,8
40 53,0 58
6,3
45 57,2 65
6,8
50 61,8 70
6,5
55 69,0 75
7,2
60 74,9 80
8,2
65 82,0 85
8,0
75 91,5 98
9,0
80 98,0 105 10,3
85 105,1 110 11,0
90 111,0 120 12,0
Please find the size of the appropriate hook spanner on page 22
SNR Industry
164
UK205
UK206
UK207
UK208
UK209
UK210
UK211
UK212
UK213
UK215
UK216
UK217
UK218
H2305
H2306
H2307
H2308
H2309
H2310
H2311
H2312
H2313
H2315
H2316
H2317
H2318
Cr
C0r
[kN]
[kN]
14,00
19,50
25,70
29,60
31,85
35,10
43,55
52,50
57,20
66,00
72,50
83,20
96,00
7,88
11,20
15,20
18,20
20,80
23,20
29,20
32,80
40,00
49,50
54,20
63,80
71,50
We
igh
Tot
al w
eig
h
t
ad
Sta
t
rat ic loa
ing d
Dy
n
rat amic
ing
lo
Ad
apt
er
Ins
ert
t in
ser
Sha
t
ft d
iam
ete
r
UK200 + H
sle
eve
Sha
ft d
iam
ete
r
Ins
Ad ert +
apt
er
sle
eve
UK200
d
[kg] [kg] [mm]
0,24
0,38
0,54
0,70
0,81
0,95
1,19
1,51
1,92
2,72
3,24
3,87
4,69
0,15
0,25
0,37
0,48
0,53
0,59
0,77
1,03
1,36
1,67
1,96
2,42
3,00
20
25
30
35
40
45
50
55
60
65
70
75
80
4/12/08
15:51
Page 130
SNR Industry
Bearing insert
165
...G2
D
C
B1
smax
D1
H1
m
G
a*
e1
[mm]
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
UC305
UC306
UC307
UC308
UC309
UC310
UC311
UC312
UC313
UC314
UC315
UC316
UC317
UC318
UC319
UC320
UC321
UC322
UC324
UC326
UC328
62
72
80
90
100
110
120
130
140
150
160
170
180
190
200
215
225
240
260
280
300
21
24
25
28
30
32
34
36
38
40
42
44
46
48
50
54
57
60
64
68
73
38
43
48
52
57
61
66
71
75
78
82
86
96
96
103
108
112
117
126
135
145
15
17
19
19
22
22
25
26
30
33
32
34
40
40
41
42
44
46
51
54
59
35,4
44,6
48,9
56,5
61,8
68,7
74,9
81,0
87,5
94,0
100,5
107,9
114,0
120,0
126,5
134,5
140,5
149,0
163,0
177,0
190,0
6,2
6,5
7,2
8,5
9,0
9,9
10,6
11,3
12,1
12,8
13,5
14,5
15,5
16,5
16,7
19,0
20,0
21,0
22,0
23,0
25,0
6,0
6,0
8,0
10,0
10,0
12,0
12,0
12,0
12,0
12,0
14,0
14,0
16,0
16,0
18,0
18,0
18,0
18,0
18,0
20,0
20,0
M6x1
M6x1
M8x1
M10x1,25
M10x1,25
M12x1,25
M12x1,25
M12x1,25
M12x1,25
M12x1,25
M14x1,5
M14x1,5
M16x1,5
M16x1,5
M16x1,5
M18x1,5
M18x1,5
M18x1,5
M18x1,5
M20x1,5
M20x1,5
3
3
4
5
5
6
6
6
6
6
6
6
8
8
8
9
9
9
9
10
10
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,5
3,0
3,0
3,5
3,0
3,5
3,0
3,0
3,0
4,0
4,0
Cr
C0r
[kN]
[kN]
22,36
27,00
33,50
40,56
53,00
62,00
71,50
81,60
93,86
104,26
113,36
122,85
132,60
143,00
156,00
171,60
182,00
205,00
228,00
252,00
275,00
11,50
15,20
19,20
24,00
31,80
37,80
44,80
51,80
60,50
68,00
76,80
86,50
96,50
108,00
122,00
140,00
155,00
178,00
208,00
242,00
272,00
t
Sha
ft d
iam
ete
r
We
igh
Sta
t
rat ic loa
ing d
Sh
d
Dy
n
rat amic
ing loa
d
aft
dia
me
ter
Ins
ert
d
[kg] [mm]
0,35
0,56
0,71
0,96
1,28
1,65
1,90
2,60
3,25
3,95
4,33
5,57
6,84
7,87
8,91
11,20
12,20
14,30
18,50
23,00
28,50
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
15:51
Page 131
Bearing insert
General
Sha
ft d
iam
ete
r
Ins
ert
d
Dy
n
rat amic
ing loa
d
Sta
t
rat ic loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
INDUSTRY
4/12/08
D
C
B1
J2
B
smax
D2
H1
m
G
a*
e1
[mm]
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
EX305
EX306
EX307
EX308
EX309
EX310
EX311
EX312
EX313
EX314
EX315
EX316
EX317
EX318
EX319
EX320
62
72
80
90
100
110
120
130
140
150
160
170
180
190
200
215
21
24
25
28
30
32
34
36
38
40
42
44
46
48
50
54
34,9
36,5
38,1
41,3
42,9
49,2
55,6
61,9
65,1
68,3
74,6
81,0
84,1
87,3
93,7
100,0
SNR Industry
166
15,9
17,5
17,5
20,6
20,6
22,2
22,2
23,9
27,0
30,2
31,8
31,8
31,8
36,5
36,5
36,5
46,8
50,0
51,6
57,1
58,7
66,6
73,0
79,4
85,7
92,1
100,0
106,4
109,5
115,9
122,3
128,6
16,7
17,5
18,3
19,8
19,8
24,6
27,8
31,0
32,5
34,2
37,3
40,5
42,0
43,6
46,8
50,0
42,8
50,0
55,0
63,5
70,0
76,2
83,0
89,0
97,0
102,0
113,0
119,0
127,0
133,0
140,0
146,0
6,2
6,5
7,2
8,5
9,0
9,9
10,6
11,3
12,1
12,8
13,5
14,5
15,5
16,5
16,7
19,0
6,0
6,7
6,7
8,0
8,0
8,7
9,0
9,0
11,5
12,0
13,0
13,0
13,0
14,5
14,5
14,5
M8x1
M8x1
M8x1
M10x1,25
M10x1,25
M10x1,25
M10x1,25
M10x1,25
M12x1,25
M12x1,25
M16x1,5
M16x1,5
M16x1,5
M20x1,5
M20x1,5
M20x1,5
4
4
4
5
5
5
5
5
6
6
8
8
8
8
8
9
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,5
3,0
3,0
3,0
3,0
3,5
Cr
C0r
[kN]
[kN]
d
[kg] [mm]
22,36 11,50 0,43
25
27,00 15,20 0,68
30
33,50 19,20 0,80
35
40,56 24,00 1,08
40
53,00 31,80 1,45
45
62,00 37,80 1,86
50
71,50 44,80 2,30
55
81,60 51,80 2,89
60
93,86 60,50 3,66
65
104,26 68,00 4,50
70
113,36 76,80 5,34
75
122,85 86,50 6,70
80
132,60 96,50 7,96
85
143,00 108,00 9,10
90
156,00 122,00 10,40
95
171,60 140,00 13,00 100
4/12/08
15:51
Page 132
SNR Industry
Bearing insert
167
UK300+H relubricatable
d
D
C
B1
c
B
d1
D1
D2
H1
Cr
[mm]
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
UK305+H
UK306+H
UK307+H
UK308+H
UK309+H
UK310+H
UK311+H
UK312+H
UK313+H
UK315+H
UK316+H
UK317+H
UK318+H
UK319+H
UK320+H
UK322+H
UK324+H
UK326+H
UK328+H
62
72
80
90
100
110
120
130
140
160
170
180
190
200
215
240
260
280
300
21
24
25
28
30
32
34
36
38
42
44
46
48
50
54
60
64
68
72
27
30
33
35
38
40
43
47
49
55
55
60
60
66
68
80
86
92
98
8,0
8,0
9,0
10,0
11,0
12,0
12,5
13,0
14,0
15,0
17,0
18,0
18,0
19,0
20,0
21,0
22,0
23,0
24,0
35
38
43
46
50
55
59
62
65
73
78
82
86
90
97
105
112
121
131
25
30
35
40
45
50
55
60
65
75
80
85
90
95
100
110
120
130
140
35,4
44,6
48,9
56,5
61,8
68,7
74,9
81,0
87,5
100,5
107,9
114,0
120,0
126,5
134,5
147,7
162,1
176,1
189,0
38
45
52
58
65
70
75
80
85
98
105
110
120
125
130
145
155
165
180
6,2
6,5
7,2
8,5
9,0
9,9
10,6
11,3
12,1
13,5
14,5
15,5
16,5
16,7
19,0
21,0
22,0
23,0
25,0
UK305
UK306
UK307
UK308
UK309
UK310
UK311
UK312
UK313
UK315
UK316
UK317
UK318
UK319
UK320
UK322
UK324
UK326
UK328
H2305
H2306
H2307
H2308
H2309
H2310
H2311
H2312
H2313
H2315
H2316
H2317
H2318
H2319
H2320
H2322
H2324
H2326
H2328
t in
ser
Sha
t
ft d
iam
ete
r
t
eig
h
We
igh
Tot
al w
sle
eve
Dy
nam
rat
ing ic loa
d
Sta
tic
rat loa
ing d
UK300 + H
Ins
ert
Sh
aft
dia
me
ter
Ins
ert
Ad +
apt
er
sle
eve
UK300
Ad
apt
er
Bearing insert with adapter sleeve
C0r
d
[kN]
[kN]
[kg]
22,36
27,00
33,50
40,56
53,00
62,00
71,50
81,60
93,86
113,36
122,85
132,60
143,00
156,00
171,60
205,00
228,00
252,00
275,00
11,50
15,20
19,20
24,00
31,80
37,80
44,80
51,80
60,50
76,80
86,50
96,50
108,00
122,00
140,00
178,00
208,00
242,00
272,00
0,49
0,59
0,92
1,03
1,47
1,74
2,20
2,54
3,27
5,03
5,83
6,89
7,94
9,23
10,97
17,64
21,19
27,90
34,45
[kg] [mm]
0,40
0,46
0,75
0,81
1,19
1,38
1,78
2,06
2,71
3,98
4,55
5,44
6,25
7,31
8,82
14,90
18,00
23,30
28,90
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
100
110
115
125
15:51
Page 133
Bearing insert
General
Sh
aft
dia
me
ter
Ins
ert
Bearing insert with cylindrical outer ring
and set screws
d
CUC200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
INDUSTRY
4/12/08
D
C B1
smax
D1 H1
m
N
J
N1
G
a* e1
[mm]
20
25
30
35
40
45
50
CUC204
CUC205
CUC206
CUC207
CUC208
CUC209
CUC210
47
52
62
72
80
85
90
17
17
19
20
21
22
23
31,0
34,0
38,1
42,9
49,2
49,2
51,6
12,7
14,3
15,9
17,5
19,0
19,0
19,0
SNR Industry
168
29,0
34,0
40,3
46,9
53,0
57,2
61,8
4,0
4,1
4,2
5,0
5,0
5,1
5,6
4,5
5,0
5,5
6,5
8,0
8,0
9,0
1,35
1,35
1,90
1,90
1,90
1,90
2,70
3,10
3,20
3,20
3,30
3,40
3,50
3,70
44,60 M6 x 1
49,73 M6 x 1
59,61 M6 x 1
68,81 M8 x 1
76,81 M8 x 1
81,81 M8 x 1
86,79 M10x1,25
3
3
3
4
4
4
5
0,6
0,6
0,6
1,1
1,1
1,1
1,1
Cr
C0r
d
[kN]
[kN] [kg] [mm]
12,80
14,00
19,50
25,70
29,60
31,85
35,10
6,65
7,88
11,20
15,20
18,20
20,80
23,20
0,20
0,21
0,35
0,47
0,64
0,68
0,80
20
25
30
35
40
45
50
4/12/08
15:51
Page 134
SNR Industry
Bearing insert
169
d
CUS200
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
Sha
ft d
iam
ete
r
Ins
ert
and set screws
D
C
B1
smax
D1
m
N
J
N1
G
a* e1
[mm]
20
25
30
35
40
45
50
Cr
[kN]
CUS204
CUS205
CUS206
CUS207
CUS208
CUS209
CUS210
47
52
62
72
80
85
90
14
15
16
17
18
19
20
25,0 7,0
27,0 7,5
30,0 8,0
32,0 8,5
34,0 9,0
41,2 9,5
43,5 10,0
28,3
34,0
40,0
46,9
52,4
57,6
63,2
5
5
5,5
6
8
8
9
1,35
1,35
1,90
1,90
1,90
1,90
2,70
2,38
2,38
3,18
3,18
3,18
3,18
3,70
44,60
49,73
59,61
68,81
76,81
81,81
86,79
M6
M6
M6
M6
M8
M8
M8
x
x
x
x
x
x
x
1
1
1
1
1
1
1
3
3
3
3
4
4
4
1,0
1,0
1,0
1,0
1,0
1,5
1,5
12,80
14,00
19,50
25,70
29,60
31,85
35,10
C0r
d
[kN] [kg] [mm]
6,65
7,88
11,20
15,20
18,20
20,80
23,20
0,13
0,17
0,27
0,42
0,48
0,57
0,66
20
25
30
35
40
45
50
15:51
Page 135
Bearing insert
General
Sha
ft d
iam
ete
r
Ins
ert
and eccentric locking collar
d
CES200
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
INDUSTRY
4/12/08
D C
B1
J2
B
smax D2
m
N
J
N1
G
a* e1
[mm]
20
25
30
35
40
45
50
CES204
CES205
CES206
CES207
CES208
CES209
CES210
47
52
62
72
80
85
90
14
15
16
17
18
19
20
21,5
21,5
23,8
25,4
30,2
30,2
30,2
13,5
13,5
15,9
17,5
18,3
18,3
18,3
SNR Industry
170
Cr
[kN]
31,0 7,0
31,0 7,5
35,7 8,0
38,9 8,5
43,7 9,0
43,7 9,5
43,7 10,0
33,3
38,1
44,5
55,6
60,3
63,5
69,9
5,0
5,0
6,0
6,5
6,5
6,5
6,5
1,35
1,35
1,90
1,90
1,90
1,90
2,70
2,38
2,38
3,18
3,18
3,18
3,18
3,70
44,60
49,73
59,61
68,81
76,81
81,81
86,79
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M8x1
3
3
3
4
4
4
4
1,0
1,0
1,0
1,5
1,5
1,5
1,5
12,80
14,00
19,50
25,70
29,60
31,85
35,10
C0r
d
[kN] [kg] [mm]
6,65
7,88
11,20
15,20
18,20
20,80
23,20
0,15
0,19
0,33
0,50
0,65
0,69
0,80
20
25
30
35
40
45
50
4/12/08
15:51
Page 136
SNR Industry
Bearing insert
171
d
CEX200 relubricatableand
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sha
ft d
iam
ete
r
Sha
ft d
iam
ete
r
Ins
ert
D
C
B1
J2
B
smax
D2
H1 m
N
J
N1
G
a* e1
[mm]
20
25
30
35
40
45
50
Cr
C0r
d
[kN] [kN] [kg] [mm]
CEX204
CEX205
CEX206
CEX207
CEX208
CEX209
CEX210
47
52
62
72
80
85
90
17
17
19
20
21
22
24
34,2
34,9
36,5
37,6
42,8
42,8
49,2
13,5
13,5
15,9
17,5
18,3
18,3
18,3
43,7
44,4
48,4
51,1
56,3
56,3
62,7
17,1
17,5
18,3
18,8
21,4
21,4
24,6
33,3
38,1
44,5
55,5
60,3
63,5
69,5
4,0
4,1
4,2
5,0
5,0
5,1
5,6
5,0
5,0
6,0
6,5
6,5
6,5
6,5
1,35
1,35
1,90
1,90
1,90
1,90
2,70
3,1
3,2
3,2
3,3
3,4
3,5
3,7
44,60
49,73
59,61
68,81
76,81
81,81
86,79
M6x1
M6x1
M6x1
M8x1
M8x1
M8x1
M8x1
3
3
3
4
4
4
4
1,0
1,0
1,0
1,5
1,5
1,5
1,5
12,80
14,00
19,50
25,70
29,60
31,85
35,10
6,65
7,88
11,20
15,20
18,20
20,80
23,20
0,22
0,25
0,41
0,60
0,78
0,87
1,01
20
25
30
35
40
45
50
15:52
Page 137
Bearing insert - inch
General
d
D
C
B1 smax
D1
H1
m
G
1/2
5/8
11/16
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
2
2
2
2
2
2
2
2
3/16
1/4
7/16
1/2
11/16
3/4
15/16
3
3
3
1/4
1/2
UC201-08
UC202-10
UC203-11
UC204-12
UC205-14
UC205-15
UC205-16
UC206-18
UC206-19
UC206-20
UC207-22
UC207-23
UC208-24
UC209-26
UC209-27
UC209-28
UC210-30
UC210-31
UC211-32
UC211-35
UC212-36
UC212-39
UC213-40
UC214-43
UC214-44
UC215-47
UC215-48
UC217-52
UC218-56
47
47
47
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
100
100
110
110
120
125
125
130
130
150
160
16
16
16
16
17
17
17
19
19
19
20
20
21
22
22
22
23
23
25
25
27
27
28
30
30
30
30
35
37
SNR Industry
172
a*
e1
[inch]
[inch]
31,0
31,0
31,0
31,0
34,0
34,0
34,0
38,1
38,1
38,1
42,9
42,9
49,2
49,2
49,2
49,2
51,6
51,6
55,6
55,6
65,1
65,1
65,1
74,6
74,6
77,8
77,8
85,7
96,0
12,7 29,0 4,4
12,7 29,0 4,4
12,7 29,0 4,4
12,7 29,0 4,4
14,3 34,0 4,3
14,3 34,0 4,3
14,3 34,0 4,3
15,9 40,3 5,0
15,9 40,3 5,0
15,9 40,3 5,0
17,5 48,0 5,8
17,5 48,0 5,8
19,0 53,0 6,3
19,0 57,2 6,8
19,0 57,2 6,8
19,0 57,2 6,8
19,0 61,8 6,5
19,0 61,8 6,5
22,2 69,0 7,2
22,2 69,0 7,2
25,4 74,9 8,2
25,4 74,9 8,2
25,4 82,0 8,0
30,2 86,5 9,0
30,2 86,5 9,0
33,3 91,5 9,0
33,3 91,5 9,0
34,1 105,1 11,0
39,7 111,0 12,0
4,7
4,7
4,7
4,7
5,5
5,5
5,5
5,5
5,5
5,5
6,5
6,5
8,0
8,0
8,0
8,0
9,0
9,0
9,0
9,0
10,5
10,5
12,0
12,0
12,0
12,0
12,0
14,0
14,0
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
1/2-20UNF
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/32
7/32
7/32
7/32
1/4
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,5
2,0
2,0
2,0
2,0
2,0
2,0
Cr
C0r
[kN]
[kN]
[kg]
12,80
12,80
12,80
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
43,55
43,55
52,50
52,50
57,20
62,00
62,00
66,00
66,00
83,20
96,00
6,65
6,65
6,65
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
29,20
29,20
32,80
32,80
40,00
45,00
45,00
49,50
49,50
63,80
71,50
0,21
0,20
0,18
0,17
0,21
0,21
0,20
0,34
0,31
0,30
0,48
0,45
0,68
0,78
0,74
0,70
0,87
0,82
1,27
1,10
1,67
1,45
1,94
2,02
2,06
2,30
2,13
3,32
4,56
aft
dia
me
ter
Sh
t
We
igh
Ins
ert
Sh
aft
dia
me
ter
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
INDUSTRY
4/12/08
d
[inch]
1/2
5/8
11/16
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
2
2
2
2
2
2
2
2
3/16
1/4
7/16
1/2
11/16
3/4
15/16
3
3
3
1/4
1/2
4/12/08
15:52
Page 138
SNR Industry
d
US200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sh
aft
dia
me
ter
Ins
ert
Sh
aft
dia
me
ter
173
D
C
B1
smax
D1
H1
m
G
[inch]
1/2
5/8
11/16
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
2
2
2
2
3/16
1/4
7/16
a* e1
[inch]
US201-08
US202-10
US203-11
US204-12
US205-14
US205-15
US205-16
US206-18
US206-19
US206-20
US207-22
US207-23
US208-24
US209-26
US209-27
US209-28
US210-30
US210-31
US211-32
US211-35
US212-36
US212-39
40
40
40
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
100
100
110
110
12
12
12
14
15
15
15
16
16
16
17
17
18
19
19
19
20
20
23
23
24
24
*width across flats (hexagon socket)
22,0
22,0
22,0
25,0
27,0
27,0
27,0
30,0
30,0
30,0
32,0
32,0
34,0
41,2
41,2
41,2
43,5
43,5
45,3
45,3
53,7
53,7
6,0
6,0
6,0
7,0
7,5
7,5
7,5
8,0
8,0
8,0
8,5
8,5
9,0
10,2
10,2
10,2
10,9
10,9
11,8
11,8
14,9
14,9
24,6
24,6
24,6
29,0
34,0
34,0
34,0
40,3
40,3
40,3
48,0
48,0
53,0
57,2
57,2
57,2
61,8
61,8
69,0
69,0
74,9
74,9
3,6
3,6
3,6
4,0
4,3
4,3
4,3
5,0
5,0
5,0
5,7
5,7
6,2
6,5
6,5
6,5
6,5
6,5
7,2
7,2
8,0
8,0
4,0
4,0
4,0
5,0
5,5
5,5
5,5
6,0
6,0
6,0
6,5
6,5
7,0
8,2
8,2
8,2
9,2
9,2
9,8
9,8
9,8
9,8
10-32UNF
10-32UNF
10-32UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
Cr
C0r
[kN]
[kN]
[kg]
d
9,55
9,55
9,55
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
43,55
43,55
52,50
52,50
4,78
4,78
4,78
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
29,20
29,20
32,80
32,80
0,09
0,08
0,10
0,13
0,18
0,18
0,16
0,28
0,25
0,24
0,38
0,37
0,60
0,75
0,72
0,67
0,80
0,78
1,10
1,05
1,30
1,22
[inch]
1/2
5/8
11/16
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
2
2
2
2
3/16
1/4
7/16
15:52
Page 139
General
Ins
ert
Sh
aft
dia
me
ter
d
ES200 relubricatable
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sh
aft
dia
me
ter
INDUSTRY
4/12/08
D
C
B1
J2
B
smax D2
H1
m
G
[inch]
1/2 ES201-08
5/8 ES202-10
11/16 ES203-11
3/4 ES204-12
7/8 ES205-14
15/16 ES205-15
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
ES205-16
ES206-18
ES206-19
ES206-20
ES207-22
ES207-23
ES208-24
ES209-26
ES209-27
ES209-28
ES210-30
ES210-31
ES211-32
ES211-35
ES212-36
ES212-39
40
40
40
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
100
100
110
110
12
12
12
14
15
15
15
16
16
16
17
17
18
19
19
19
20
20
24
24
24
24
19,1
19,1
19,1
21,4
21,4
21,4
21,4
23,8
23,8
23,8
25,4
25,4
30,2
30,2
30,2
30,2
30,2
30,2
32,5
32,5
33,4
33,4
SNR Industry
174
13,5
13,5
13,5
13,5
13,5
13,5
13,5
15,9
15,9
15,9
17,5
17,5
18,3
18,3
18,3
18,3
18,3
18,3
20,7
20,7
22,3
22,3
28,6
28,6
28,6
30,9
30,9
30,9
30,9
35,7
35,7
35,7
38,9
38,9
43,7
43,7
43,7
43,7
43,7
43,7
48,4
48,4
49,3
49,3
6,5
6,5
6,5
7,5
7,5
7,5
7,5
9,0
9,0
9,0
9,5
9,5
11,0
11,0
11,0
11,0
11,0
11,0
12,0
12,0
12,0
12,0
28,6
28,6
28,6
33,3
38,1
38,1
38,1
44,5
44,5
44,5
55,6
55,6
60,3
63,5
63,5
63,5
69,9
69,9
76,2
76,2
84,2
84,2
3,6
3,6
3,6
4,0
4,3
4,3
4,3
5,0
5,0
5,0
5,7
5,7
6,2
6,5
6,5
6,5
6,5
6,5
7,2
7,2
8,0
8,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
6,0
6,0
6,0
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
8,0
8,0
8,0
8,0
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
Cr
C0r
[inch]
a*
e1
[kN]
[kN]
[kg]
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
9,55
9,55
9,55
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
43,55
43,55
52,50
52,50
4,78
4,78
4,78
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
29,20
29,20
32,80
32,80
0,14
0,13
0,13
0,15
0,19
0,19
0,18
0,35
0,31
0,28
0,51
0,48
0,68
0,82
0,76
0,73
0,85
0,83
1,18
0,81
1,30
1,09
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
d
[inch]
1/2
5/8
11/16
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
2
2 3/16
2 1/4
2 7/16
4/12/08
15:52
Page 140
SNR Industry
175
d
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sh
aft
dia
me
ter
Ins
ert
Sh
aft
dia
me
ter
D
C
B1
J2
B
smax
D2
H1 m
[inch]
1/2
5/8
11/16
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
G
a*
e1
[inch]
EX201-08
EX202-10
EX203-11
EX204-12
EX205-14
EX205-15
EX205-16
EX206-18
EX206-19
EX206-20
EX207-22
EX207-23
EX208-24
EX209-26
EX209-27
EX209-28
EX210-30
EX210-31
EX211-32
EX211-35
EX212-36
EX212-39
EX213-40
EX214-43
EX214-44
EX215-47
EX215-48
EX217-52
EX218-56
47
47
47
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
100
100
110
110
120
125
125
130
130
150
160
16
16
16
16
17
17
17
19
19
19
20
20
21
22
22
22
23
23
25
25
27
27
28
30
30
30
30
35
37
34,0
34,0
34,0
34,0
34,8
34,8
34,8
36,4
36,4
36,4
37,6
37,6
42,8
42,8
42,8
42,8
49,2
49,2
55,4
55,4
61,8
61,8
68,2
68,2
68,2
74,6
74,6
53,2
55,0
13,5
13,5
13,5
13,5
13,5
13,5
13,5
15,9
15,9
15,9
17,5
17,5
18,3
18,3
18,3
18,3
18,3
18,3
20,7
20,7
22,3
22,3
23,5
23,5
23,5
23,9
23,9
27,0
24,0
43,5
43,5
43,5
43,5
44,3
44,3
44,3
48,3
48,3
48,3
51,1
51,1
56,3
56,3
56,3
56,3
62,7
62,7
71,3
71,3
77,7
77,7
85,7
85,7
85,7
92,1
92,1
73,2
72,5
17,0
17,0
17,0
17,0
17,4
17,4
17,4
18,2
18,2
18,2
18,8
18,8
21,4
21,4
21,4
21,4
24,6
24,6
27,7
27,7
30,9
30,9
34,1
34,1
34,1
37,3
37,3
23,4
24,5
33,3
33,3
33,3
33,3
38,1
38,1
38,1
44,5
44,5
44,5
55,6
55,6
60,3
63,5
63,5
63,5
69,9
69,9
76,2
76,2
84,2
84,2
86,0
96,8
96,8
102,0
102,0
119,0
120,0
4,4
4,4
4,4
4,4
4,3
4,3
4,3
5,0
5,0
5,0
5,8
5,8
6,3
6,8
6,8
6,8
6,5
6,5
7,2
7,2
8,2
8,2
8,0
9,0
9,0
9,0
9,0
11,0
10,3
5,0
5,0
5,0
5,0
5,0
5,0
5,0
6,0
6,0
6,0
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
8,0
8,0
8,0
8,0
8,5
8,5
8,5
8,5
8,5
10,0
9,5
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
7/16-20UNF
7/16-20UNF
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/32
7/32
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,5
1,5
1,5
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
Cr
C0r
d
[kN]
[kN] [kg] [inch]
12,80
12,80
12,80
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
43,55
43,55
52,50
52,50
57,20
62,00
62,00
66,00
66,00
83,20
96,00
6,65
6,65
6,65
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
29,20
29,20
32,80
32,80
40,00
45,00
45,00
49,50
49,50
63,80
71,50
0,29
0,27
0,24
0,22
0,25
0,25
0,24
0,43
0,40
0,38
0,61
0,58
0,83
0,96
0,91
0,87
1,10
1,04
1,58
1,36
2,03
1,76
2,51
2,62
2,58
2,80
2,74
3,65
5,00
1/2
5/8
11/16
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
15:52
Page 141
General
d
D
sle
eve
C B1
c B
d1 D1
D2 H1
[inch]
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
UK205+H-12
UK206+H-14
UK206+H-15
UK206+H-16
UK207+H-18
UK207+H-19
UK208+H-20
UK208+H-22
UK209+H-23
UK209+H-24
UK210+H-26
UK210+H-27
UK210+H-28
UK211+H-30
UK211+H-31
UK211+H-32
UK213+H-35
UK213+H-36
UK215+H-39
UK215+H-40
UK216+H-43
UK216+H-44
UK217+H-47
UK217+H-48
52
62
62
62
72
72
80
80
85
85
90
90
90
100
100
100
120
120
130
130
140
140
150
150
17
19
19
19
20
20
21
21
22
22
23
23
23
25
25
25
28
28
30
30
33
33
35
35
21
25
25
25
27
27
29
29
30
30
31
31
31
33
33
33
36
36
41
41
44
44
44
44
8,0
8,0
8,0
8,0
9,0
9,0
10,0
10,0
11,0
11,0
12,0
12,0
12,0
12,5
12,5
12,5
14,0
14,0
15,0
15,0
17,0
17,0
18,0
18,0
35
38
38
38
43
43
46
46
50
50
55
55
55
59
59
59
65
65
73
73
78
78
82
82
25 34,0 38
30 40,3 45
30 40,3 45
30 40,3 45
35 48,0 52
35 48,0 52
40 53,0 58
40 53,0 58
45 57,2 65
45 57,2 65
50 61,8 70
50 61,8 70
50 61,8 70
55 69,0 75
55 69,0 75
55 69,0 75
65 82,0 85
65 82,0 85
75 91,5 98
75 91,5 98
80 98,0 105
80 98,0 105
85 105,1 110
85 105,1 110
SNR Industry
176
4,3
5,0
5,0
5,0
5,8
5,8
6,3
6,3
6,8
6,8
6,5
6,5
6,5
7,2
7,2
7,2
8,0
8,0
9,0
9,0
10,3
10,3
11,0
11,0
UK205
UK206
UK206
UK206
UK207
UK207
UK208
UK208
UK209
UK209
UK210
UK210
UK210
UK211
UK211
UK211
UK213
UK213
UK215
UK215
UK216
UK216
UK217
UK217
H2305-12
H2306-14
H2306-15
H2306-16
H2307-18
H2307-19
H2308-20
H2308-22
H2309-23
H2309-24
H2310-26
H2310-27
H2310-28
H2311-30
H2311-31
H2311-32
H2313-35
H2313-36
H2315-39
H2315-40
H2316-43
H2316-44
H2317-47
H2317-48
Dy
rat nam
ing ic
Ad
apt
er
Ins
ert
Cr
C0r
[kN]
[kN]
14,00
19,50
19,50
19,50
25,70
25,70
29,60
29,60
31,85
31,85
35,10
35,10
35,10
43,55
43,55
43,55
57,20
57,20
66,00
66,00
72,50
72,50
83,20
83,20
7,88
11,20
11,20
11,20
15,20
15,20
18,20
18,20
20,80
20,80
23,20
23,20
23,20
29,20
29,20
29,20
40,00
40,00
49,50
49,50
54,20
54,20
63,80
63,80
Tot
al w
eig
ht
We
igh
t In
ser
Sh
t
aft
dia
me
ter
UK200 + H
eev
e
Ins
e
Ad rt+
apt
er
sl
Sh
aft
dia
me
ter
UK200
St
ratatic lo
ing ad
loa
d
INDUSTRY
4/12/08
d
[kg] [kg] [inch]
0,24
0,40
0,39
0,36
0,55
0,53
0,76
0,74
0,80
0,84
1,00
0,99
0,95
1,20
1,19
1,13
2,11
2,01
2,82
2,81
3,26
3,16
3,82
3,72
0,15
0,25
0,25
0,25
0,37
0,37
0,48
0,48
0,53
0,53
0,59
0,59
0,59
0,77
0,77
0,77
1,36
1,36
1,67
1,67
1,96
1,96
2,42
2,42
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
4/12/08
15:52
Page 142
SNR Industry
d
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Sh
aft
dia
me
ter
Ins
ert
Sh
aft
dia
me
ter
177
D
C
B1
smax
D1
H1
m
G
[inch]
7/8
UC305-14
15/16 UC305-15
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
3 15/16
a*
e1
[inch]
UC305-16
UC306-18
UC306-19
UC307-20
UC307-22
UC307-23
UC308-24
UC309-26
UC309-27
UC309-28
UC310-30
UC310-31
UC311-32
UC311-35
UC312-36
UC312-39
UC313-40
UC314-43
UC314-44
UC315-47
UC315-48
UC317-52
UC318-56
UC320-63
62
62
62
72
72
80
80
80
90
100
100
100
110
110
120
120
130
130
140
150
150
160
160
180
190
215
21
21
21
24
24
25
25
25
28
30
30
30
32
32
34
34
36
36
38
40
40
42
42
46
48
54
38
38
38
43
43
48
48
48
52
57
57
57
61
61
66
66
71
71
75
78
78
82
82
96
96
108
15
15
15
17
17
19
19
19
19
22
22
22
22
22
25
25
26
26
30
33
33
32
32
40
40
42
35.4
35.4
35.4
44,6
44,6
48,9
48,9
48,9
56,5
61,8
61,8
61,8
68,7
68,7
74,9
74,9
81,0
81,0
87,5
94,0
94,0
100,5
100,5
114,0
120,0
134,5
6,2
6,2
6,2
6,5
6,5
7,2
7,2
7,2
8,5
9,0
9,0
9,0
9,9
9,9
10,6
10,6
11,3
11,3
12,1
12,8
12,8
13,5
13,5
15,5
16,5
19,0
6
6
6
6
6
8
8
8
10
10
10
10
12
12
12
12
12
12
12
12
12
14
14
16
16
18
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
1/2-20UNF
1/2-20UNF
5/8-18UNF
5/8-18UNF
5/8-18UNF
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
3/16
3/16
3/16
3/16
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
1/4
1/4
5/16
5/16
5/16
1,5
1,5
1,5
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,5
2,5
2,5
3,0
3,5
3,5
Cr
C0r
[kN]
[kN]
d
[kg]
22,36 11,50 0,35
22,36 11,50 0,35
22,36 11,50 0,34
27,00 15,20 0,58
27,00 15,20 0,56
33,50 19,20 0,77
33,50 19,20 0,71
33,50 19,20 0,70
40,56 24,00 1,00
53,00 31,80 1,36
53,00 31,80 1,33
53,00 31,80 1,30
62,00 37,80 1,74
62,00 37,80 1,68
71,50 44,80 2,08
71,50 44,80 1,87
81,60 51,80 2,65
81,60 51,80 2,50
93,86 60,50 3,30
104,26 68,00 4,00
104,26 68,00 3,96
113,36 76,80 4,29
113,36 76,80 4,24
132,60 96,50 6,76
143,00 108,00 8,03
171,60 140,00 11,00
[inch]
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
3 15/16
15:52
Page 143
General
Ins
ert
Sh
aft
dia
me
ter
d
Dy
n
rat amic
in
loa
d
Sta g
t
rat ic loa
ing d
We
igh
t
Sh
aft
dia
me
ter
INDUSTRY
4/12/08
D
C
B1
J2
B
smax
D2
H1
m
G
[inch]
7/8
EX305-14
15/16 EX305-15
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
3 15/16
EX305-16
EX306-18
EX306-19
EX307-20
EX307-22
EX307-23
EX308-24
EX309-26
EX309-27
EX309-28
EX310-30
EX310-31
EX311-32
EX311-35
EX312-36
EX312-39
EX313-40
EX314-43
EX314-44
EX315-47
EX315-48
EX317-52
EX318-56
EX320-63
62
62
62
72
72
80
80
80
90
100
100
100
110
110
120
120
130
130
140
150
150
160
160
180
190
215
21 34,9
21 34,9
21 34,9
24 36,5
24 36,5
25 38,1
25 38,1
25 38,1
28 41,3
30 42,9
30 42,9
30 42,9
32 49,2
32 49,2
34 55,6
34 55,6
36 61,9
36 61,9
38 65,1
40 68,3
40 68,3
42 74,6
42 74,6
46 84,1
48 87,3
54 100,0
SNR Industry
178
a*
e1
[inch]
15,9
15,9
15,9
17,5
17,5
17,5
17,5
17,5
20,6
20,6
20,6
20,6
22,2
22,2
22,2
22,2
23,9
23,9
27,0
30,2
30,2
31,8
31,8
31,8
36,5
36,5
46,8
46,8
46,8
50,0
50,0
51,6
51,6
51,6
57,1
58,7
58,7
58,7
66,6
66,6
73,0
73,0
79,4
79,4
85,7
92,1
92,1
100,0
100,0
109,5
87,3
128,6
16,7
16,7
16,7
17,5
17,5
18,3
18,3
18,3
19,8
19,8
19,8
19,8
24,6
24,6
27,8
27,8
31,0
31,0
32,5
34,2
34,2
37,3
37,3
42,0
43,6
50,0
42,8
42,8
42,8
50,0
50,0
55,0
55,0
55,0
63,5
70,0
70,0
70,0
76,2
76,2
83,0
83,0
89,0
89,0
97,0
102,0
102,0
113,0
113,0
127,0
133,0
146,0
6,2
6,2
6,2
6,5
6,5
7,2
7,2
7,2
8,5
9,0
9,0
9,0
9,9
9,9
10,6
10,6
11,3
11,3
12,1
12,8
12,8
13,5
13,5
15,5
16,5
19,0
6,0
6,0
6,0
6,7
6,7
6,7
6,7
6,7
8,0
8,0
8,0
8,0
8,7
8,7
9,0
9,0
9,0
9,0
11,5
12,0
12,0
13,0
13,0
14,0
15,0
16,0
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
7/16-20UNF
7/16-20UNF
7/16-20UNF
5/8-18UNF
5/8-18UNF
5/8-18UNF
3/4-16UNF
3/4-16UNF
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/32
7/32
7/32
5/16
5/16
5/16
3/8
3/8
Cr
[kN]
1,5
1,5
1,5
1,5
1,5
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,0
2,5
2,5
2,5
2,5
3,0
3,0
3,5
22,36
22,36
22,36
27,00
27,00
33,50
33,50
33,50
40,56
53,00
53,00
53,00
62,00
62,00
71,50
71,50
81,60
81,60
93,86
104,26
104,26
113,36
113,36
132,60
143,00
171,60
C0r
d
[kN] [kg] [inch]
11,50 0,43
11,50 0,43
11,50 0,43
15,20 0,71
15,20 0,68
19,20 0,86
19,20 0,80
19,20 0,78
24,00 1,13
31,80 1,57
31,80 1,52
31,80 1,47
37,80 1,93
37,80 1,88
44,80 2,49
44,80 2,24
51,80 2,95
51,80 2,86
60,50 3,85
68,00 4,45
68,00 4,40
76,80 5,40
76,80 5,28
96,50 7,88
108,00 9,20
140,00 12,85
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
3 15/16
4/12/08
15:52
Page 144
SNR Industry
179
UK300 + H
d
D
C
B1
c
B
d1
D1 D2
H1
Cr
[inch]
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 3/16
2 1/4
2 7/16
2 1/2
2 11/16
2 3/4
2 15/16
3
3 1/4
3 1/2
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
Tot
al w
eig
ht
We
igh
t in
ser
t
Sh
aft
dia
me
ter
Ad
apt
er
Ins
ert
sle
eve
eev
e
Ins
e
Ad rt+
apt
er
sl
Sh
aft
dia
me
ter
UK300
[kN]
UK305+H-12
UK306+H-14
UK306+H-15
UK306+H-16
UK307+H-18
UK307+H-19
UK308+H-20
UK308+H-22
UK309+H-23
UK309+H-24
UK310+H-26
UK310+H-27
UK310+H-28
UK311+H-30
UK311+H-31
UK311+H-32
UK313+H-35
UK313+H-36
UK315+H-39
UK315+H-40
UK316+H-43
UK316+H-44
UK317+H-47
UK317+H-48
UK319+H-55
UK320+H-56
62
72
72
72
80
80
90
90
100
100
110
110
110
120
120
120
140
140
160
160
170
170
180
180
200
215
21
24
24
24
25
25
28
28
30
30
32
32
32
34
34
34
38
38
42
42
44
44
46
46
50
54
27
30
30
30
33
33
35
35
38
38
40
40
40
43
43
43
49
49
55
55
55
55
60
60
66
68
8,0
8,0
8,0
8,0
9,0
9,0
10,0
10,0
11,0
11,0
12,0
12,0
12,0
12,5
12,5
12,5
14,0
14,0
15,0
15,0
17,0
17,0
18,0
18,0
19,0
20,0
35 25
38 30
38 30
38 30
43 35
43 35
46 40
46 40
50 45
50 45
55 50
55 50
55 50
59 55
59 55
59 55
65 65
65 65
73 75
73 75
78 80
78 80
82 85
82 85
90 95
97 100
35,4
44,6
44,6
44,6
48,9
48,9
56,5
56,5
61,8
61,8
68,7
68,7
68,7
74,9
74,9
74,9
87,5
87,5
100,5
100,5
107,9
107,9
114,0
114,0
126,5
134,5
38
45
45
45
52
52
58
58
65
65
70
70
70
75
75
75
85
85
98
98
105
105
110
110
125
130
6,2
6,5
6,5
6,5
7,2
7,2
8,5
8,5
9,0
9,0
9,9
9,9
9,9
10,6
10,6
10,6
12,1
12,1
13,5
13,5
14,5
14,5
15,5
15,5
16,7
19,0
UK305
UK306
UK306
UK306
UK307
UK307
UK308
UK308
UK309
UK309
UK310
UK310
UK310
UK311
UK311
UK311
UK313
UK313
UK315
UK315
UK316
UK316
UK317
UK317
UK319
UK320
H2305-12
H2306-14
H2306-15
H2306-16
H2307-18
H2307-19
H2308-20
H2308-22
H2309-23
H2309-24
H2310-26
H2310-27
H2310-28
H2311-30
H2311-31
H2311-32
H2313-35
H2313-36
H2315-39
H2315-40
H2316-43
H2316-44
H2317-47
H2317-48
H2319-55
H2320-56
22,36
27,00
27,00
27,00
33,50
33,50
40,56
40,56
53,00
53,00
62,00
62,00
62,00
71,50
71,50
71,50
93,86
93,86
113,36
113,36
122,85
122,85
132,60
132,60
156,00
171,60
C0r
d
[kN] [kg] [kg] [inch]
11,50 0,49
15,20 0,61
15,20 0,60
15,20 0,57
19,20 0,93
19,20 0,91
24,00 1,09
24,00 1,09
31,80 1,46
31,80 1,50
37,80 1,68
37,80 1,78
37,80 1,74
44,80 2,21
44,80 2,20
44,80 2,14
60,50 3,46
60,50 3,36
76,80 5,13
76,80 5,10
86,50 5,85
86,50 5,75
96,50 6,84
96,50 6,74
122,00 9,66
140,00 10,62
0,40
0,46
0,46
0,46
0,75
0,75
0,81
0,81
1,19
1,19
1,38
1,38
1,38
1,78
1,78
1,78
2,71
2,71
3,98
3,98
4,55
4,55
5,44
5,44
7,31
8,82
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
111/16
1 3/4
1 7/8
115/16
2
2 3/16
2 1/4
2 7/16
2 1/2
211/16
2 3/4
215/16
3
3 1/4
3 1/2
15:52
Page 145
General
Ins
ert
Sh
aft
dia
me
ter
d
CUC200 relubricatableand set screws
Dy
ratnamic
ing lo
ad
Sta
t
i
c
rat lo
ing ad
We
igh
t
Sh
aft
dia
me
ter
INDUSTRY
4/12/08
D C
B1 smax D1 H1 m
N
J
N1
G
[inch]
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
CUC204-12
CUC205-14
CUC205-15
CUC205-16
CUC206-18
CUC206-19
CUC206-20
CUC207-22
CUC207-23
CUC208-24
CUC209-26
CUC209-27
CUC209-28
CUC210-30
CUC210-31
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
17
17
17
17
19
19
19
20
20
21
22
22
22
23
23
31,0
34,0
34,0
34,0
38,1
38,1
38,1
42,9
42,9
49,2
49,2
49,2
49,2
51,6
51,6
SNR Industry
180
a*
e1
[inch]
12,7
14,3
14,3
14,3
15,9
15,9
15,9
17,5
17,5
19,0
19,0
19,0
19,0
19,0
19,0
29,0
34,0
34,0
34,0
40,3
40,3
40,3
46,9
46,9
53,0
57,2
57,2
57,2
61,8
61,8
4,0
4,1
4,1
4,1
4,2
4,2
4,2
5,0
5,0
5,0
5,1
5,1
5,1
5,6
5,6
4,5
5,0
5,0
5,0
5,5
5,5
5,5
6,5
6,5
8,0
8,0
8,0
8,0
9,0
9,0
1,35
1,35
1,35
1,35
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
2,70
2,70
3,1
3,2
3,2
3,2
3,2
3,2
3,2
3,3
3,3
3,4
3,5
3,5
3,5
3,7
3,7
44,60
49,73
49,73
49,73
59,61
59,61
59,61
68,81
68,81
76,81
81,81
81,81
81,81
86,79
86,79
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
3/8-24UNF
3/8-24UNF
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
Cr
C0r
d
[kN] [kN] [kg] [inch]
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
0,20
0,21
0,21
0,21
0,34
0,31
0,30
0,48
0,45
0,68
0,78
0,74
0,70
0,80
0,82
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
4/12/08
15:52
Page 146
SNR Industry
d
D
C
B1
smax
D1 m
N
J
N1
G
[inch]
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
a*
e1
[inch]
CUS204-12
CUS205-14
CUS205-15
CUS205-16
CUS206-18
CUS206-19
CUS206-20
CUS207-22
CUS207-23
CUS208-24
CUS209-26
CUS209-27
CUS209-28
CUS210-30
CUS210-31
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
14
15
15
15
16
16
16
17
17
18
19
19
19
20
20
25,0 7,0
27,0 7,5
27,0 7,5
27,0 7,5
30,0 8,0
30,0 8,0
30,0 8,0
32,0 8,5
32,0 8,5
34,0 9,0
41,2 9,5
41,2 9,5
41,2 9,5
43,5 10,0
43,5 10,0
28,3 5 1,35
34,0 5 1,35
34,0 5 1,35
34,0 5 1,35
40,0 5,5 1,90
40,0 5,5 1,90
40,0 5,5 1,90
46,9 6 1,90
46,9 6 1,90
52,4 8 1,90
57,6 8 1,90
57,6 8 1,90
57,6 8 1,90
63,2 9 2,70
63,2 9 2,70
2,38
2,38
2,38
2,38
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,70
3,70
44,60
49,73
49,73
49,73
59,61
59,61
59,61
68,81
68,81
76,81
81,81
81,81
81,81
86,79
86,79
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,5
1,5
1,5
1,5
1,5
Cr
C0r
Sh
aft
dia
me
ter
CUS200
Dy
n
rat amic
ing loa
d
Sta
tic
rat loa
ing d
We
igh
t
Ins
ert
Sh
aft
dia
me
ter
and set screws
181
d
[kN]
[kN] [kg] [inch]
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
0,13
0,18
0,18
0,18
0,28
0,25
0,24
0,38
0,37
0,60
0,75
0,72
0,67
0,80
0,78
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
INDUSTRY
4/12/08
15:52
Page 147
General
CES200
d
Dy
n
rat amic
in
loa
d
Sta g
tic
rat loa
in
d
We g
igh
t
Sh
aft
dia
me
ter
Ins
ert
Sh
aft
dia
me
ter
and eccentric locking collar
D
C
B1
J2
B
smax D2
m
N
J
N1
G
[inch]
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
111/16
1 3/4
1 7/8
115/16
CES204-12
CES205-14
CES205-15
CES205-16
CES206-18
CES206-19
CES206-20
CES207-22
CES207-23
CES208-24
CES209-26
CES209-27
CES209-28
CES210-30
CES210-31
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
14
15
15
15
16
16
16
17
17
18
19
19
19
20
20
21,5
21,5
21,5
21,5
23,8
23,8
23,8
25,4
25,4
30,2
30,2
30,2
30,2
30,2
30,2
SNR Industry
182
a*
e1 Cr
[inch]
13,5
13,5
13,5
13,5
15,9
15,9
15,9
17,5
17,5
18,3
18,3
18,3
18,3
18,3
18,3
31,0 7,0 33,3
31,0 7,5 38,1
31,0 7,5 38,1
31,0 7,5 38,1
35,7 8,0 44,5
35,7 8,0 44,5
35,7 8,0 44,5
38,9 8,5 55,6
38,9 8,5 55,6
43,7 9,0 60,3
43,7 9,5 63,5
43,7 9,5 63,5
43,7 9,5 63,5
43,7 10,0 69,9
43,7 10,0 69,9
5,0
5,0
5,0
5,0
6,0
6,0
6,0
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
1,35
1,35
1,35
1,35
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
2,70
2,70
2,38
2,38
2,38
2,38
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,18
3,70
3,70
44,60
49,73
49,73
49,73
59,61
59,61
59,61
68,81
68,81
76,81
81,81
81,81
81,81
86,79
86,79
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
C0r
d
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
0,15
0,19
0,19
0,18
0,35
0,31
0,28
0,51
0,48
0,68
0,82
0,76
0,73
0,85
0,83
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
4/12/08
15:52
Page 148
SNR Industry
183
d
CEX200 relubricatableand
Dy
ratnamic
in
Sta g load
t
rat ic lo
in a
We g d
igh
t
Sh
aft
dia
me
ter
Ins
ert
Sh
aft
dia
me
ter
D C
B1 J2
B smax D2 H1 m
N
J
N1
G
[inch]
3/4
7/8
15/16
1
1
1
1
1
1
1
1
1
1
1
1
1/8
3/16
1/4
3/8
7/16
1/2
5/8
11/16
3/4
7/8
15/16
a* e1
[inch]
CEX204-12
CEX205-14
CEX205-15
CEX205-16
CEX206-18
CEX206-19
CEX206-20
CEX207-22
CEX207-23
CEX208-24
CEX209-26
CEX209-27
CEX209-28
CEX210-30
CEX210-31
47
52
52
52
62
62
62
72
72
80
85
85
85
90
90
17
17
17
17
19
19
19
20
20
21
22
22
22
24
24
34,2
34,9
34,9
34,9
36,5
36,5
36,5
37,6
37,6
42,8
42,8
42,8
42,8
49,2
49,2
*width across flats (hexagon socket)
13,5
13,5
13,5
13,5
15,9
15,9
15,9
17,5
17,5
18,3
18,3
18,3
18,3
18,3
18,3
43,7
44,4
44,4
44,4
48,4
48,4
48,4
51,1
51,1
56,3
56,3
56,3
56,3
62,7
62,7
17,1
17,5
17,5
17,5
18,3
18,3
18,3
18,8
18,8
21,4
21,4
21,4
21,4
24,6
24,6
33,3
38,1
38,1
38,1
44,5
44,5
44,5
55,5
55,5
60,3
63,5
63,5
63,5
69,5
69,5
4,0
4,1
4,1
4,1
4,2
4,2
4,2
5,0
5,0
5,0
5,1
5,1
5,1
5,6
5,6
5,0
5,0
5,0
5,0
6,0
6,0
6,0
6,5
6,5
6,5
6,5
6,5
6,5
6,5
6,5
1,35
1,35
1,35
1,35
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
1,90
3,70
3,70
3,1
3,2
3,2
3,2
3,2
3,2
3,2
3,3
3,3
3,4
3,5
3,5
3,5
3,7
3,7
44,60
49,73
49,73
49,73
59,61
59,61
59,61
68,81
68,81
76,81
81,81
81,81
81,81
86,79
86,79
1/4-28UNF
1/4-28UNF
1/4-28UNF
1/4-28UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
5/16-24UNF
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
Cr
C0r
d
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
12,80
14,00
14,00
14,00
19,50
19,50
19,50
25,70
25,70
29,60
31,85
31,85
31,85
35,10
35,10
6,65
7,88
7,88
7,88
11,20
11,20
11,20
15,20
15,20
18,20
20,80
20,80
20,80
23,20
23,20
0,22
0,25
0,25
0,24
0,43
0,40
0,38
0,61
0,58
0,83
0,96
0,91
0,87
1,10
1,04
3/4
7/8
15/16
1
1 1/8
1 3/16
1 1/4
1 3/8
1 7/16
1 1/2
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
4/12/08
15:52
Page 149
Tolerances and Fixing of housings
Tolerances of cast iron housings
Tolerance of spherical bearing seat
Nominal size bearing seat
D1
[mm]
over
incl.
180
300
180
Fit
J7
H7
Tolerances of pillow block housings
Housing
P
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
SNR Industry
184
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
PLE
203
204
205
206
207
208
209
210
211
212
PE
203
204
205
206
207
208
209
210
211
212
214
215
216
217
218
PH / PG PA / PAE
203
203
204
204
205
205
206
206
207
207
208
208
209
209
210
210
211
212
PP
203
204
205
206
207
Tolerances
[µm]
H
J
±150
±700
±200
±1000
±300
4/12/08
15:52
Page 150
SNR Industry
185
Tolerances of cartridge housings
Housing
Tolerances [µm]
H
C200
203
204
205
206
207
208
209
210
211
212
213
214
215
216
A
max.
min.
0
-30
0
-35
0
-40
0
-46
Housing
±200
200
±300
300
Tolerances [µm]
H
C300
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
Radial
Runout
max.
A
max.
min.
0
-35
±200
0
Radial
Runout
max.
200
-40
±300
0
-46
300
0
-52
±400
0
-57
4/12/08
15:52
Page 151
Tolerances of flanged housings
Housing
F
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
SNR Industry
186
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
FE
FCE
FC
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
FEE
205
206
207
208
209
210
212
FS
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
FTE
FLE
203
204
205
206
207
208
209
210
203
204
205
206
207
208
209
210
211
212
214
215
FL
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
FLZ
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
204
205
206
207
208
209
210
212
4/12/08
15:52
Page 152
SNR Industry
187
Tolerances [µm]
FD
FA
203
204
205
206
207
208
203
204
205
206
207
208
209
210
211
212
FAE
204
205
206
207
J
e
±700
±500
H3
Radial
Runout
max.
200
h8
300
±1000
±800
400
4/12/08
15:52
Page 153
Tolerances of take-up housings
Housing
Tolerances [µm]
J1
T
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
J2
Parallelism of
guiding groove
max.
min.
max.
min.
max.
+200
0
0
-500
500
600
+300
0
0
-800
700
800
Tolerances of stretcher frames
Housing
WB
204 - 213
SNR Industry
188
Tolerances [µm]
m
±700
J
±700
e
±500
4/12/08
15:52
Page 154
SNR Industry
189
Tolerances stretcher frame accessories
Housing
Dimensions [mm]
Guiding rail
T200
204
205
206
207
208
209
210
211
212
213
J2' ±0,5
77
J1'
ds
16
q
28
20
32
11
90
o
12
103
15
24
42
14
131
20
30
56
20
152
24
60
26
Housing
Dimensions [mm]
Guiding rail
T300
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
326
326
328
nut of threaded spindle
J2' ±0,5
81
91
101
113
126
141
151
161
172
182
194
206
216
230
242
262
J1'
11
15
287
322
352
382
nut of threaded spindle
ds
22
24
26
28
30
32
34
36
38
42
q
32
38
40
46
50
55
60
64
75
26
28
46
90
34
50
95
32
52
100
36
42
46
55
60
65
70
110
120
130
140
16
18
20
24
28
30
o
12
14
16
18
20
22
24
38
42
48
52
56
4/12/08
15:52
Page 155
Fixing of housings
Pin placing
To meet an exact positioning of bearing units when mounted, the following cast iron housings are
equipped with additional supporting surface for the positioning of pins.
Housing
SNR Industry
190
Housing
Dimensions
[mm]
P
PH
a
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
203
204
205
206
207
208
209
210
5,0
5,0
6,0
6,0
6,0
9,0
9,0
10,0
10,0
10,0
9,0
9,0
9,5
11,0
11,0
11,0
5,5
6,5
8,0
9,0
10,0
10,0
12,0
13,0
12,5
13,0
13,0
15,0
15,0
15,0
20,0
20,0
20,0
22,5
25,0
29,0
29,0
b
8,0
8,0
9,0
13,0
11,0
12,0
12,0
13,0
13,0
17,0
18,5
15,0
16,0
17,0
17,0
18,0
12,5
11,5
13,0
13,0
14,0
15,0
19,0
22,5
22,0
21,0
26,0
30,0
30,0
30,0
32,0
32,0
32,0
35,0
35,0
35,0
35,0
Dimensions
[mm]
recom-
recom-
Thickness mended
of housing Pin Ø
Thickness mended
of housing
Pin Ø
9
3
9
3
9
3
10
3
12
4
12
4
14
5
14
5
15
6
15
6
15
6
20
6
20
6
20
8
20
8
20
10
9
4
11
4
12
5
13
5
14
6
15
6
16
8
17
8
17
10
20
10
20
10
22
10
22
11
24
10
24
10
26
13
26
13
29
13
34
13
39
13
42
16
15
15
16
18
19
19
20
22
22
25
27
27
28
30
32
34
16
19
21
23
25
28
31
33
36
40
40
45
45
50
50
55
55
60
70
80
80
3
3
3
3
4
4
5
5
6
6
6
6
6
8
8
10
4
4
5
5
6
6
8
8
10
10
10
10
10
10
10
13
13
13
13
13
16
F
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
324
326
328
a
6
6
6
6
7
8
8
8
8
8
9
9
9
10
10
11
6
7
8
8
8
9
10
10
11
11
11
11
11
12
12
14
14
14
14
15
17
b
30
30
34
35
38
40
43
47
47
50
52
54
54
55
58
62
37
40
46
48
48
52
55
56
56
62
65
70
70
78
80
85
85
90
95
105
120
4/12/08
15:52
Page 156
SNR Industry
191
Fixing of housings
Housing
b
Dimensions
[mm]
recom-
Housing
ØC
Dimensions
[mm]
PE
a
b
204
205
206
207
208
209
210
211
212
214
215
216
218
10,0
12,0
13,0
14,5
16,0
16,0
18,0
20,0
20,0
21,5
22,0
26,0
28,5
59,0
59,0
72,0
73,5
81,5
88,0
91,0
101,0
110,0
119,0
121,5
132,0
151,0
Thickness
of housing
14,5
14,5
17,0
19,0
19,0
21,5
21,5
22,5
25,0
27,5
27,5
30,0
35,0
recommended
Pin Ø
3
3
3
4
4
5
5
6
6
6
6
8
10
a
recom-
a
32,0
36,0
40,5
46,0
51,0
57,0
60,5
63,5
71,0
77,5
85,0
85,0
88,5
88,5
103,5
b
12
13
15
17
18
20
21
22
25
27
29
29
30
30
36
Thickness mended centering-Ø depth
of housing Pin Ø
C +0,2
t +0,2
9,5
3
44,80
3,2
10,0
3
50,80
3,2
11,0
3
63,50
3,2
12,0
3
76,20
4,0
12,5
4
88,90
4,0
13,0
4
88,90
4,0
13,0
5
98,42
4,0
13,0
5
101,60
4,0
15,0
6
107,95
4,0
16,0
6
125,40
4,0
18,0
6
161,92
4,0
18,0
6
161,92
4,0
20,0
6
161,92
4,0
20,0
6
161,92
4,0
22,0
6
179,37
4,0
b
Dimensions
[mm]
ØC
t
Housing
FE
203
204
205
206
207
208
209
210
211
212
213
214
215
216
218
a
b
14,0
14,5
16,0
17,0
17,0
19,0
21,0
22,5
26,0
26,0
28,0
28,0
30,0
t
a
28,0
31,0
35,0
42,5
50,0
55,0
58,0
60,0
70,0
75,0
85,0
85,0
85,0
a
FLE
203
204
205
206
207
208
209
210
211
212
213
214
215
Thickness mended centering-Ø depth
of housing Pin Ø
C +0,2
t +0,2
8,0
3
44,80
3,2
8,5
3
50,80
3,2
9,0
3
63,50
3,2
10,0
3
73,00
4,0
11,0
4
82,50
4,0
11,0
4
88,90
4,0
11,0
5
98,42
4,0
11,0
5
101,60
4,0
13,0
6
107,95
4,0
14,0
6
125,40
4,0
15,0
6
142,00
4,0
15,0
6
142,00
4,0
15,0
6
142,00
4,0
4/12/08
15:53
Page 157
Tolerances of pressed steel
housings
Tolerances of flanged housings
Housing
Tolerance [µm]
PF / PFT
PFL
PFE
J
203
204
205
206
207
203
204
205
206
207
208
205
206
±500
209
210
211
212
±1000
4 mounting holes from
shaft diameter 40 on
SNR Industry
192
4/12/08
15:53
Page 158
SNR Industry
193
Tolerances of bearing inserts
Tolerances of outer ring
Nominal
diameter
D
[mm]
over
incl.
min.
max.
Kea
[µm]
max.
50
80
120
150
180
250
315
-11
-13
-15
-18
-25
-30
-35
0
0
0
0
0
0
0
20
25
35
40
45
50
60
50
80
120
150
180
250
Dmp
[µm]
Tolerances of inner ring
Nominal
diameter
Tolerance
of
d
[mm]
S
[µm]
over
incl.
50
80
120
50
80
120
140
±200
±250
±300
±350
CUC/CUS/CES/CEX
Nominal diameter
d
[mm]
over
incl.
18
30
18
30
50
∆dmp
[µm]
min.
max.
+15
+18
+21
0
0
0
Kia
[µm]
max.
10
10
13
∆Bs
[µm]
min.
max.
-120
-120
-120
0
0
0
4/12/08
15:53
Page 159
Tolerances of inner ring
UC/ES/US/EX
Nominal diameter
d
[mm]
over
incl.
18
30
50
80
120
140
18
30
50
80
120
∆dmp
∆Dmp
Kia
Kea
∆Bs
=
=
=
=
=
∆dmp
[µm]
min.
max.
0
0
0
0
0
0
Kia
[µm]
max.
+15
+18
+21
+24
+28
+33
12
15
18
22
28
35
∆Bs
[µm]
min.
max.
-120
-120
-120
-150
-200
-250
0
0
0
0
0
0
Allowance of the average bore diameter in a single plane
Allowance of the average outer diameter in a single plane
Radial runout of the inner race in an assembled bearing bearing insert
Radial runout of the outer race in an assembled bearing bearing insert
Allowance of a single inner race width
Tolerances of edge clearances
Nominal size of
edge clearance
e1
[mm]
Bore
e1min
e1max
diameter
[mm]
[mm]
[mm]
over
incl. radial axial radial axial
0,6
1,0
1,1
1,5
2,0
40,0
50,0
120,0
120,0
80,0
0,6
1,0
1,1
1,5
2,0
0,6
1,0
1,1
1,5
2,0
100,0
280,0
2,5
3,0
4,0
2,5
3,0
4,0
80,0
2,5
3,0
4,0
SNR Industry
194
1,0
1,5
2,0
2,3
3,0
3,5
3,8
5,0
6,5
2,0
3,0
3,5
4,0
4,5
5,0
6,0
8,0
9,0
4/12/08
15:53
Page 160
SNR Industry
195
Tolerance of tapered bore
Nominal size
Nominal
diameter
d
[mm]
over incl.
18
30
50
80
120
α
α/2
∆α/2
30
50
80
120
180
Allowance for
nominal size
Deviation
∆dmp
∆d1mp-∆dmp
[µm]
[µm]
min.
max.
min.
max.
0
0
0
0
0
+33
+39
+46
+54
+63
0
0
0
0
0
+21
+25
+30
+35
+40
= Nominal angle of taper
= Angle of inclination at end of cone
= Deviation of angle of inclination
B
=
d
=
d1
=
∆dmp =
∆d1mp =
Allowance for
angle of taper
= 4°46'18,8''
= 2°23'9,4''
∆d1mp-∆dmp
[minutes]
=1,716 •
B
Width of inner ring
Nominal bore diameter
Bore diameter at large cone end
= d+0,083333 • B
Deviation of average bore diameter in a single plane
Deviation of bore diameter d1
4/12/08
15:53
Page 161
Custom-built bearing units
Designs
The SNR standard range of ball bearing units includes a large number of various types in e.g. different shapes and materials. In case the presented standard solutions are not sufficient for a special application, SNR can design a particular solution.
SNR already met the special requirements of numberous customers by manufacturing bearing
units in multiple variations with special materials, as e.g. cast iron or steel casting, special surface treatments, as e.g. zinc or nickel coating, or special shapes adapted to narrow spaces.
A flexible production enables us to manufacture small quantities with short time of delivery.
SNR has years of experience in realization of special solutions. In the following you find a small
selection of special ball bearing units designed in cooperation with our customers.
Examples
SNR Industry
196
4/12/08
15:53
Page 162
SNR Industry
197
Conversion table inch-mm
inch
0
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
0
0
0,397
0,794
1,191
1,588
1,984
2,381
2,778
3,175
3,572
3,969
4,366
4,763
5,159
5,556
5,953
6,350
6,747
7,144
7,541
7,938
8,334
8,731
9,128
9,525
9,922
10,319
10,716
11,113
11,509
11,906
12,303
12,700
13,097
13,494
13,891
14,288
14,684
15,081
15,478
15,875
16,272
16,669
17,066
17,463
17,859
18,256
18,653
19,050
19,447
19,844
20,241
20,638
21,034
21,431
21,828
22,225
22,622
23,019
23,416
23,813
24,209
24,606
25,003
1
2
25,400
25,797
26,194
26,591
26,988
27,384
27,781
28,178
28,575
28,972
29,369
29,766
30,163
30,559
30,956
31,353
31,750
32,147
32,544
32,941
33,338
33,734
34,131
34,528
34,925
35,322
35,719
36,116
36,513
36,909
37,306
37,703
38,100
38,497
38,894
39,291
39,688
40,084
40,481
40,878
41,275
41,672
42,069
42,466
42,863
43,259
43,656
44,053
44,450
44,847
45,244
45,641
46,038
46,434
46,831
47,228
47,625
48,022
48,419
48,816
49,213
49,609
50,006
50,403
50,800
51,197
51,594
51,991
52,388
52,784
53,181
53,578
53,975
54,372
54,769
55,166
55,563
55,959
56,356
56,753
57,150
57,547
57,944
58,341
58,738
59,134
59,531
59,928
60,325
60,722
61,119
61,516
61,913
62,309
62,706
63,103
63,500
63,897
64,294
64,691
65,088
65,484
65,881
66,278
66,675
67,072
67,469
67,866
68,263
68,659
69,056
69,453
69,850
70,247
70,644
71,041
71,438
71,834
72,231
72,628
73,025
73,422
73,819
74,216
74,613
75,009
75,406
75,803
3
76,200
76,597
76,994
77,391
77,788
78,184
78,581
78,978
79,375
79,772
80,169
80,566
80,963
81,359
81,756
82,153
82,550
82,947
83,344
83,741
84,138
84,534
84,931
85,328
85,725
86,122
86,519
86,916
87,313
87,709
88,106
88,503
88,900
89,297
89,694
90,091
90,488
90,884
91,281
91,678
92,075
92,472
92,869
93,266
93,663
94,059
94,456
94,853
95,250
95,647
96,044
96,441
96,838
97,234
97,631
98,028
98,425
98,822
99,219
99,616
100,013
100,409
100,806
101,203
4
5
6
7
8
9
10
101,600
101,997
102,394
102,791
103,188
103,584
103,981
104,378
104,775
105,172
105,569
105,966
106,363
106,759
107,156
107,553
107,950
108,347
108,744
109,141
109,538
109,934
110,331
110,728
111,125
111,522
111,919
112,316
112,713
113,109
113,506
113,903
114,300
114,697
115,094
115,491
115,888
116,284
116,681
117,078
117,475
117,872
118,269
118,666
119,063
119,459
119,856
120,253
120,650
121,047
121,444
121,841
122,238
122,634
123,031
123,428
123,825
124,222
124,619
125,016
125,413
125,809
126,206
126,603
127,000
127,397
127,794
128,191
128,588
128,984
129,381
129,778
130,175
130,572
130,969
131,366
131,763
132,159
132,556
132,953
133,350
133,747
134,144
134,541
134,938
135,334
135,731
136,128
136,525
136,922
137,319
137,716
138,113
138,509
138,906
139,303
139,700
140,097
140,494
140,891
141,288
141,684
142,081
142,478
142,875
143,272
143,669
144,066
144,463
144,859
145,256
145,653
146,050
146,447
146,844
147,241
147,638
148,034
148,431
148,828
149,225
149,622
150,019
150,416
150,813
151,209
151,606
152,003
152,400
152,797
153,194
153,591
153,988
154,384
154,781
155,178
155,575
155,972
156,369
156,766
157,163
157,559
157,956
158,353
158,750
159,147
159,544
159,941
160,338
160,734
161,131
161,528
161,925
162,322
162,719
163,116
163,513
163,909
164,306
164,703
165,100
165,497
165,894
166,291
166,688
167,084
167,481
167,878
168,275
168,672
169,069
169,466
169,863
170,259
170,656
171,053
171,450
171,847
172,244
172,641
173,038
173,434
173,831
174,228
174,625
175,022
175,419
175,816
176,213
176,609
177,006
177,403
177,800
178,197
178,594
178,991
179,388
179,784
180,181
180,578
180,975
181,372
181,769
182,166
182,563
182,959
183,356
183,753
184,150
184,547
184,944
185,341
185,738
186,134
186,531
186,928
187,325
187,722
188,119
188,516
188,913
189,309
189,706
190,103
190,500
190,897
191,294
191,691
192,088
192,484
192,881
193,278
193,675
194,072
194,469
194,866
195,263
195,659
196,056
196,453
196,850
197,247
197,644
198,041
198,438
198,834
199,231
199,628
200,025
200,422
200,819
201,216
201,613
202,009
202,406
202,803
203,200
203,597
203,994
204,391
204,788
205,184
205,581
205,978
206,375
206,772
207,169
207,566
207,963
208,359
208,756
209,153
209,550
209,947
210,344
210,741
211,138
211,534
211,931
212,328
212,725
213,122
213,519
213,916
214,313
214,709
215,106
215,503
215,900
216,297
216,694
217,091
217,488
217,884
218,281
218,678
219,075
219,472
219,869
220,266
220,663
221,059
221,456
221,853
222,250
222,647
223,044
223,441
223,838
224,234
224,631
225,028
225,425
225,822
226,219
226,616
227,013
227,409
227,806
228,203
228,600
228,997
229,394
229,791
230,188
230,584
230,981
231,378
231,775
232,172
232,569
232,966
233,363
233,759
234,156
234,553
234,950
235,347
235,744
236,141
236,538
236,934
237,331
237,728
238,125
238,522
238,919
239,316
239,713
240,109
240,506
240,903
241,300
241,697
242,094
242,491
242,888
243,284
243,681
244,078
244,475
244,872
245,269
245,666
246,063
246,459
246,856
247,253
247,650
248,047
248,444
248,841
249,238
249,634
250,031
250,428
250,825
251,222
251,619
252,016
252,413
252,809
253,206
253,603
254,000
254,397
254,794
255,191
255,588
255,984
256,381
256,778
257,175
257,572
257,969
258,366
258,763
259,159
259,556
259,953
260,350
260,747
261,144
261,541
261,938
262,334
262,731
263,128
263,525
263,922
264,319
264,716
265,113
265,509
265,906
266,303
266,700
267,097
267,494
267,891
268,288
268,684
269,081
269,478
269,875
270,272
270,669
271,066
271,463
271,859
272,256
272,653
273,050
273,447
273,844
274,241
274,638
275,034
275,431
275,828
276,225
276,622
277,019
277,416
277,813
278,209
278,606
279,003
4/12/08
15:53
Page 163
Tables
Conversion table mm-inch
mm
0
1
2
3
4
5
6
7
8
9
10
0
0,03937
0,07874
0,11811
0,15748
0,19685
0,23622
0,27559
0,31496
0,35433
mm
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
SNR Industry
198
0,39370
0,43307
0,47244
0,51181
0,55118
0,59055
0,62992
0,66929
0,70866
0,74803
100
0
0,19685
0,39370
0,59055
0,78740
0,98425
1,18110
1,37795
1,57480
1,77165
1,96850
2,16535
2,36220
2,55906
2,75591
2,95276
3,14961
3,34646
3,54331
3,74016
3,93701
4,13386
4,33071
4,52756
4,72441
4,92126
5,11811
5,31496
5,51181
5,70866
5,90551
6,10236
6,29921
6,49606
6,69291
6,88976
7,08661
7,28346
7,48031
7,67717
20
0,78740
0,82677
0,86614
0,90551
0,94488
0,98425
1,02362
1,06299
1,10236
1,14173
200
7,87402
8,07087
8,26772
8,46457
8,66142
8,85827
9,05512
9,25197
9,44882
9,64567
9,84252
10,03937
10,23622
10,43307
10,62992
10,82677
11,02362
11,22047
11,41732
11,61417
30
40
50
60
1,18110
1,22047
1,25984
1,29921
1,33858
1,37795
1,41732
1,45669
1,49606
1,53543
1,57480
1,61417
1,65354
1,69291
1,73228
1,77165
1,81102
1,85039
1,88976
1,92913
1,96850
2,00787
2,04724
2,08661
2,12598
2,16535
2,20472
2,24409
2,28346
2,32283
70
2,36220
2,40157
2,44094
2,48031
2,51969
2,55906
2,59843
2,63780
2,67717
2,71654
2,75591
2,79528
2,83465
2,87402
2,91339
2,95276
2,99213
3,03150
3,07087
3,11024
80
90
3,14961
3,18898
3,22835
3,26772
3,30709
3,34646
3,38583
3,42520
3,46457
3,50394
3,54331
3,58268
3,62205
3,66142
3,70079
3,74016
3,77953
3,81890
3,85827
3,89764
300
mm
inch
mm
inch
mm
inch
11,81102
12,00787
12,20472
12,40157
12,59843
12,79528
12,99213
13,18898
13,38583
13,58268
13,77953
13,97638
14,17323
14,37008
14,56693
14,76378
14,96063
15,15748
15,35433
15,55118
0,001
0,002
0,003
0,004
0,005
0,006
0,007
0,008
0,009
0,000039
0,000079
0,000118
0,000157
0,000197
0,000236
0,000276
0,000315
0,000354
0,01
0,02
0,03
0,04
0,05
0,06
0,07
0,08
0,09
0,000394
0,000787
0,001181
0,001575
0,001969
0,002362
0,002756
0,003150
0,003543
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
0,003937
0,007874
0,011811
0,015748
0,019685
0,023622
0,027559
0,031496
0,035433
4/12/08
15:53
Page 164
SNR Industry
199
SNR ball bearing unit range
Corrosion-resistant SNR ball bearing units with
thermoplastic housings
The ball bearing units presented in this catalogue are composed of
housings made of Thermoplastic PBT and bearing inserts of stainless or chrome steel.
The units can be equipped with protective caps of SR50
(Polypropylen), open with 2-lip seal for passing shafts or closed for
shaft ends..
The bearing units are used, among other areas, in the food- and
pharmaceutical industries with their high demands for hygiene and
corrosion resistance of the material used. For this reason all bearing units are lubricated with grease in accordance with the USDA
H1 standard. Currently this standard places the most stringent
requirements on the hygiene and purity of the materials used in the
lubricant.
SNR ball bearing units of stainless steel
SNR ball bearing units made of stainless steel are used, among
other areas, for applications with high requirements for the corrosion resistance of the components.
In these applications with severe operating conditions, as e.g.
high humidity or direct contact with agressive media, conventional bearing units meet the requirements insufficient or not at all.
SNR takes these special applications into account with an extensive standard range of ball bearing units made of stainless steel.
Furthermore SNR meets the requirements of the pharmaceuticaland food-industries according to USDA H1 (high purity of the raw
materials used in the lubricant) by filling all inserts of SNR stainless steel bearing units exclusively with grease according to this
specification.
couvGBc:couv
4/12/08
15:38
Page 1
TC 09 GBc
- © SNR 2006 -
www.snr-contact.com
Siège social : SNR ROULEMENTS - Rue des Usines - 74000 Annecy - France - RCS Annecy B 325821072 - Code NAF 291H - Code NACE 29.1
www.snr-bearings.com

SNR ball bearing units with cast iron or pressed - NTN

Transcription

Similar documents

SNR ball bearing units with cast iron or pressed steel housings

Mancais auto-alinháveis SNR

XLP2 Evaporative Condensers

Datei herunterladen - It Works Body Wraps Deutschland

Produkt SKU Nummer Einkaufspreis in $ exkl. MwSt. Einkaufspreis

TOILET SEAT OFFER