Dewatering-Clarifying Screener
Transcription
Dewatering-Clarifying Screener
Product Information Dewatering-Clarifying Screener KASON CORPORATION 67-71 East Willow St. Millburn, NJ 07041-1416 USA Tel: 973-467-8140 Fax: 973-258-9533 E-mail: info@kason.com KASON CORPORATION, EUROPE Units 12 & 13 Park Hall Business Village Park Hall Road Longton, Stoke-on-Trent Staffordshire ST3 5XA Tel: 01782-597540 Fax: 01782-597549 E-mail: sales@kasoneurope.co.uk SEPARATOR ENGINEERING LTD. 6025 Boul Thimens Saint Laurent Quebec CANADA H4S 1V8 Toll Free (Canada only): 877-694-4441 Tel: 514-667-6777 Fax: 514-745-2074 E-mail: info@separatorengineering.com www.kason.com DD-0756 Dewatering-Clarifying Screener This Vibroscreen® Dewatering-Clarifying Screener with anti-blinding spray-wash system separates solid materials from liquids at high rates on a batch or continuous basis. The unit contains a 48 in. (1219 mm) diameter screen in a cylindrical housing supported on a circular base by rugged springs. An imbalanced weight gyratory motor affixed to the housing imparts vibration, causing solid particles to move across the screen and exit through an upper discharge spout, as liquid flows through screen apertures onto a tapered pan and exits through a lower discharge spout. A manifold positioned above the screen feeds eight nozzles that spray liquid in wide conical patterns continuously or on a timed cycle, preventing solids from blinding the screen. The unit functions both as a "dewatering screener" when separating a small-to-medium percentage of liquid from a large percentage of solids, and as a "clarifier" when separating a small percentage of solids from a large percentage of liquids. It is constructed of epoxy-coated carbon steel, and available in stainless steel to 3-A, FDA, BISSC and other sanitary standards, as well as to UL, ATEX, CSA and CE electrical standards. The unit is offered in diameters from 18 to 100 in. (460 to 2540 mm) with four to 12 spray-wash nozzles depending on screen diameter. The spray-wash system can also be retrofitted to circular vibratory screeners of any make and model. Options: • Designs for Sanitary Applications • "Air-Lift" Quick Screen Change System • "Clamshell Lid" Quick Screen Change System • Clean-In-Place (CIP) Design, Construction and Finish • Design, Construction and Finish to Pharmaceutical Specifications • Gap-Free Design • E-Z ForceTM Weight Adjustment System • Ball Tray Anti-Blinding Device • Kleen Screen Anti-Blinding Device • Ultrasonic Anti-Blinding Device for fine powders • Auto-Lube Automatic Lubrication System for gyratory motors • Wiper Blade Assembly • Four-Finger Flex Wiper Anti-Blinding Device • Bag Dump/Dust Collector configurations • See Thru Cover • High Capacity "KASCADE" Internal Recycle Screening Decks