Brian Crower

contents
ENGINE MAKE
Honda/Acura B16A, B18C, B17A (DelSol, Integra, Civic Si)............................. 1
Honda/Acura B18A, B18B, B20B (Integra, CR-V)............................................ 2
Honda H22, H22A (Prelude)............................................................................ 3
Honda/Acura K20A2, K20Z3, K24A2 (RSX-S, Civic Si, TSX)............................. 4
Honda/Acura K20A3, K24A1, K24A4 (Civic Si, RSX, Accord)........................... 5
Honda F20C, F22C (S2000)............................................................................ 6
Mitsubishi 4G63 (Eclipse)............................................................................... 7
Mitsubishi 4G63 (Evo VIII)............................................................................... 8
Dodge SRT-4 (Neon)....................................................................................... 9
Nissan SR20DE-T (S13, S14, S15 Silvia)....................................................... 10
Nissan KA24DE (240SX)............................................................................... 11
Nissan/Infiniti VQ35DE (350z, G35) . ........................................................... 12
Nissan RB26/RB25 (Skyline)........................................................................ 13
Nissan TB48 (Patrol)..................................................................................... 14
Toyota 2JZGTE (Supra MK IV)......................................................................... 15
Lexus 2JZGE (IS300)..................................................................................... 16
2007 CATALOG
Toyota 7MGTE (Supra MK III)..........................................................................17
Ford 4.6L/5.4L Modular (Mustang, Lightning)............................................... 18
Subaru EJ205 (WRX)..................................................................................... 19
Subaru EJ257 (STi)....................................................................................... 20
Spring/Retainer Kits, Valve Springs, Titanium Retainers................................ 21
Crankshafts, Connecting Rods, Pistons....................................................22-23
HONDA CIVIC Si / ACURA INTEGRA
ACURA INTEGRA / HONDA CR-V
b16a/b18c/b17a
b18a/b18b/b20b
CAMSHAFTS
Cold Valve Lash: .006" int / .008" exh
DESCRIPTION
STAGE
2
2
3
STAGE
STAGE
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
Forced Induction Specification
BC0011
Short duration profile builds cylinder
pressure by reducing overlap, high lift
108°
for more air intake. Requires kit BC0010.
290°/292°
280°/284°
260°/262°
232°/234°
202°/200°
178°/180°
.465"/.450"
.322"/.307"
.206"/.190"
11.81/11.43
8.18/7.80
5.23/4.82
BC0010
or
BC0010S
Normally Aspirated Specification
BC0012
Hot street/strip or road race spec. Use with
CAI, H, E, ECU, A/F mods. Excellent street
102°
manners and idle quality. Requires kit BC0010.
306°/300°
236°/232°
228°/226°
Normally Aspirated Specification
BC0013
Intended for fully built engine. Extensive
modifications, high compression pistons and 102°
tuning recommended. Requires kit BC0010.
310°/308°
256°/256°
256°/256°
USDM B16A2 (’99-’00)
Stock
280°/276°
219°/214°
.417"/.373"
10.59/9.47
USDM B18C1 (’94-’00)
Stock
290°/278°
230°/216°
.423"/.380"
10.74/9.65
JDM B16A (Type R)
Stock
294°/286°
233°/224°
.449"/.417"
11.40/10.59
254°/248°
216°/214°
194°/192°
260°/254°
220°/220°
220°/220°
.472"/.472"
.364"/.351"
.264"/.252"
.496"/.496"
.443"/.443"
.428"/.428"
11.99/11.99
9.25/8.92
6.70/6.40
12.60/12.60
11.25/11.25
10.87/10.87
BC0010
or
BC0010S
BC0010
or
BC0010S
TIMING EVENTS
12
5
BTDC
ATDC
40
49
ABDC
BBDC
29
18
BTDC
ATDC
45
50
ABDC
BBDC
32
21
BTDC
ATDC
48
53
ABDC
BBDC
Rocker Ratio: 1.55:1 mid, 1.5:1 sec, 1.45:1 pri
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers are CNC machined from 6AL4V round bar titanium or steel alloy for longevity.
KIT #
BC0010
BC0010S
SPRING #
BC1010
BC1010
RETAINER #
BC2010 Ltd Street/Race
BC2011 High Mileage
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
DESCRIPTION
PART #
DESCRIPTION
Dual spring, titanium retainer
Dual spring, steel alloy retainer
BC3010
BC3011
BC3012
BC3013
BC3014
BC3015
33.0mm Intake (standard head diameter)
28.0mm Exhaust (standard head diameter)
33.5mm Intake (+.5mm head diameter)
28.5mm Exhaust (+.5mm head diameter)
34.0mm Intake (+1mm head diameter)
29.0mm Exhuast (+1mm head diameter)
Spring Pressure:
BC1010 Seat: 1.350" @ 80 lbs / Open: 0.900" @ 220 lbs / Coil Bind: 0.765" (no machine work required)
Mandatory to check valve guide to retainer clearance prior to operation.
For high mileage, daily driver applications (15,000+ miles annually), BC highly recommends the steel retainer for added longevity.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
STROKER
KITS
The B Series stroker kit from Brian Crower features:
• BC 4340 forged steel crankshaft (84.5mm B16A, 92 or 95mm B18C), 35 lbs.
• Choice of 4340 steel connecting rods w/ARP fasteners for proven reliability.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for ultimate strength and minimal flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• ACL Race Series rod, main and thrust bearings included (BC4020).
• Fully system balanced and ready to install.
• 50% deposit required to get started.
KIT #
CRANK #
ROD #
PISTON #
BEARING #
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
STAGE
2
2
STAGE
Forced Induction Specification
Short duration profile builds cylinder
pressure by reducing overlap, high lift
for more air intake. Requires kit BC0020.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0021
280°/280°
204°/204°
.470"/.470"
11.94/11.94
BC0020
107°
Normally Aspirated Specification
BC0022
Hot street/strip or road race profile. Use
with CAI, H, E, A/F modifications for optimum 108°
horsepower and torque. Requires kit BC0020.
300°/300°
USDM B18A1 (’90-’93)
Stock
270°/276°
186°/190°
.392"/.380"
USDM B18B1 (’92-’00)
Stock
274°/278°
183°/184°
.393"/.380"
9.98/9.65
USDM B20B (’97-’98)
Stock
278°/276°
190°/194°
.397"/.382"
10.08/9.70
222°/220°
.423"/.413"
10.74/10.49
BC0020
TIMING EVENTS
-1
-9
ATDC
BTDC
25
33
ABDC
BBDC
7
-2
BTDC
BTDC
35
42
ABDC
BBDC
9.95/9.65
Rocker Ratio: 1.75:1
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Dual spring, titanium retainer
BC3020
BC3021
BC3022
BC3023
31.0mm Intake (standard head diameter)
28.0mm Exhaust (standard head diameter)
31.5mm Intake (+.5mm head diameter)
28.5mm Exhaust (+.5mm head diameter)
PART #
DESCRIPTION
BC8001
BC8003
M.I.D. - B18 Series - 84mm to 85mm Bore
M.I.D. - B18 Series - Drag Kit - 86mm to 87mm Max
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0020
SPRING #
BC1020
RETAINER #
BC2020
Spring Pressure:
BC1020 Seat: 1.400" @ 70 lbs / Open: 0.905" @ 210 lbs / Coil Bind: 0.815" (no machine work required)
Factory installed height = Intake 1.320" / Exhaust: 1.425", BC spring inst at 1.400" on intake and exhaust.
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
STROKER
KITS
The B Series stroker kit from Brian Crower features:
• BC 4340 forged steel crankshaft (92 or 95mm stroke), 35 lbs.
• Choice of 4340 steel connecting rods w/ARP fasteners for proven reliability.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for ultimate strength and minimal flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• ACL Race Series rod, main and thrust bearings included (BC4020).
• Fully system balanced and ready to install.
• 50% deposit required to get started.
Rather than piece together your bottom end with a variety
of mismatched parts, order a BC stroker kit that not only
increases your overall displacement for more horsepower
and torque, but also delivers strength and reliability using
only the highest quality parts. Lightweight crank available (7 lbs less).
DESCRIPTION
BC0018
BC5018
BC6028
BC7018
BC4020
84.5mm w/BC625+
BC0019
BC5018
BC6018
BC7018
BC4020
84.5mm w/bROD
BC0026
BC5020
BC6048
BC7029
BC4020
92mm w/Long Rod
BC0027
BC5019
BC6048
BC7029
BC4020
95mm w/Long Rod
BC0028
BC5019
BC6029
BC7029
BC4020
95mm w/BC625+
BC0029
BC5019
BC6019
BC7029
BC4020
95mm w/bROD
For LightWeight crank (27 lbs), specify "LW" after stroker kit part number (ex. BC0018LW).
Stock Specifications:
B16A 81mm Bore x 77.4mm Stroke - 7.995" Block Height
B18C 81mm Bore x 87.2mm Stroke - 8.350" Block Height
BC Stroker Specifications:
1.87L 84mm Bore x 84.5mm Stroke (choice of bore and compression from 8.5 - 14:1)
2.10L 84mm Bore x 95mm Stroke (choice of bore and compression from 8.5 - 14:1)
CAMSHAFTS
KIT #
PART #
DESCRIPTION
BC8000
BC8002
BC8001
BC8003
M.I.D. - B16A - 84mm to 85mm Bore
M.I.D. - B16A - Drag Kit - 86mm to 87mm Max Bore
M.I.D. - B18 Series - 84mm to 85mm Bore
M.I.D. - B18 Series - Drag Kit - 86mm to 87mm Max
Sleeves come in sets of four. MID = Modular Integrated Deck
1
CRANK #
ROD #
PISTON #
BEARING #
DESCRIPTION
BC0026
BC5020
BC6048
BC7029
BC4020
92mm w/Long Rod
BC0027
BC5019
BC6048
BC7029
BC4020
95mm w/Long Rod
BC0028
BC5019
BC6029
BC7029
BC4020
95mm w/BC625+
BC0029
BC5019
BC6019
BC7029
BC4020
95mm w/bROD
For LightWeight crank (27 lbs), specify "LW" after stroker kit part number (ex. BC0018LW).
Stock Specifications:
B18A/B 81mm Bore x 89mm Stroke - 8.350" Block Height
B20B/Z 84mm Bore x 89mm Stroke - 8.350" Block Height
BC Stroker Specifications:
2.16L 85mm Bore x 95mm Stroke (choice of bore and compression from 8.5 - 14:1)
2.04L 84mm Bore x 92mm Stroke (choice of bore and compression from 8.5 - 14:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
Sleeves come in sets of four. MID = Modular Integrated Deck
See Price List for complete shelf listings
2
HONDA PRELUDE
HONDA CIVIC Si / ACURA RSX-S, TSX
h22/h22a
k20a/k20z
CAMSHAFTS
Cold Valve Lash: .006" int / .008" exh
DESCRIPTION
STAGE
2
2
3
STAGE
STAGE
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
Forced Induction Specification
BC0031
Short duration profile builds cylinder
pressure by reducing overlap, high lift
110°
for more air intake. Requires kit BC0030.
304°/306°
214°/216°
210°/216°
233°/235°
184°/192°
176°/184°
.464"/.448"
.324"/.312"
.262"/.247"
11.78/11.38
8.23/7.92
6.65/6.27
BC0030
or
BC0030S
Normally Aspirated Specification
BC0032
Hot street/strip or road race specification.
Use with CAI, H, E, ECU, A/F mods. Excellent 103°
street manners. Requires kit BC0030.
312°/310°
220°/220°
216°/218°
Normally Aspirated Specification
BC0033
Intended for fully built engine. Extensive
modifications and tuning capabilities are
102°
highly recommended. Requires kit BC0030.
318°/316°
228°/226°
224°/224°
USDM H22A1 (’94-’96)
Stock
288°/308°
JDM H22 (’92-’96)
Stock
JDM H22A (Type S)
Stock
255°/248°
200°/198°
198°/196°
263°/255°
216°/212°
198°/194°
.470"/.469"
.325"/.308"
.280"/.264"
.470"/.470"
.360"/.354"
.268"/.256"
11.94/11.91
8.25/7.82
7.11/6.70
11.94/11.94
9.14/8.99
6.80/6.50
BC0030
or
BC0030S
BC0030
or
BC0030S
TIMING EVENTS
10.5
3.5
BTDC
ATDC
42.5
51.5
ABDC
BBDC
28.5
17
BTDC
ATDC
46.5
51
ABDC
BBDC
33.5
21.5
BTDC
ATDC
49.5
53.5
ABDC
BBDC
BC1030
BC1030
STAGE
Normally Aspirated Race Spec
BC0043
314°/310° 244°/240° .525"/.518" 13.34/13.15
Intended for fully built engine. Extensive
256°/256° 190°/190° .369"/.369"
9.37/9.37
modifications, high compression pistons.
250°/250° 184°/184° .323"/.323"
8.20/8.20
Also works on K24 all motor. Req kit BC0040.
BC0040
BC0040X
BC0040S
BC0040SX
.456"/.420"
11.58/10.67
USDM K24A2 (TSX)
Stock
310°/302°
.469"/.438"
11.91/11.12
JDM K20A (DC5)
Stock
320°/318°
USDM K20A2 (RSX-S)
Stock
302°/305°
219°/215°
.483"/.431"
12.27/10.95
210°/212°
.451"/.453"
11.45/11.50
224°/219°
.483"/.424"
12.27/10.77
Rocker Ratio: 1.75:1 mid, 1.7:1 sec, 1.7:1 pri.
RETAINER #
BC2010 Ltd Street/Race
BC2011 High Mileage
DESCRIPTION
PART #
DESCRIPTION
Dual spring, titanium retainer
Dual spring, steel alloy retainer
BC3030
BC3031
BC3034
BC3035
35.0mm Intake (standard head diameter)
30.0mm Exhaust (standard head diameter)
36.0mm Intake (+1mm head diameter)
31.0mm Exhaust (+1mm head diameter)
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
ROD #
PISTON #
BC5039
BC5039
BC5035
BC5035
BC6038
BC6039
BC6038
BC6039
BC7039
BC7039
BC7039
BC7039
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Dual spring, seat, titanium ret
Dual spring, seat, steel retainer
Dual spring, titanium retainer
Dual spring, steel retainer
BC3040
BC3041
BC3042
BC3043
BC3044
BC3045
35.0mm Intake (standard head diameter)
30.0mm Exhaust (standard head diameter)
35.5mm Intake (+.5mm head diameter)
30.5mm Exhaust (+.5mm head diameter)
36.0mm Intake (+1mm head diameter)
31.0mm Exhaust (+1mm head diameter)
PART #
DESCRIPTION
BC8005
BC8006
M.I.D. - K20 Series - 87mm to 90mm Max Bore
M.I.D. - K24 Series - 87mm to 90mm Max Bore
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers are CNC machined from 6AL4V round bar titanium or steel alloy for longevity.
BC0040
BC0040S
BC0040X
BC0040SX
SPRING #
RETAINER #
SEAT #
BC1040
BC1040
BC1040
BC1040
BC2010
BC2011
BC2010
BC2011
BC2904
BC2904
No Seat
No Seat
Spring Pressure:
BC1040 Seat: 1.590" @ 80 lbs / Open: 1.110" @ 250 lbs / Coil Bind: 1.030" (no machine work required)
For high mileage, daily driver applications (15,000+ miles annually), BC highly recommends the steel retainer for added longevity.
STROKER
KITS
The K Series stroker kit from Brian Crower features:
KIT #
DESCRIPTION
50mm w/BC625+
50mm w/bROD
55mm w/BC625+
55mm w/bROD
Stock Specifications:
H22A 87mm Bore x 90.7mm Stroke - 8.655" Block Height / 50mm (93-96) / 55mm (97-01)
BC Stroker Specifications:
2.49L 89mm Bore x 100mm Stroke (choice of bore and compression from 9:1 - 14:1)
TIMING EVENTS
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
Note: Keeper groove angles have changed, 05-up may require keeper number BC2940
• BC 4340 billet steel crankshaft (92mm K20, 102mm K24 stroke).
• Premium 4340 steel billet, custom connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• High strength ACL copper-lead rod and main bearings included (BC4020).
• Fully system balanced and ready to install.
The BC stroker kit for the Honda/Acura K Series engine platform incorporates
the wider B16A bearing (.935" width) that offers more surface area than the
.740" width bearing found in the OEM K Series crank and rod combination. The
added surface area increases bearing life, especially at extended rpm.
Note: This kit requires custom connecting rods (modified BE bore and BE width).
• BC 4340 billet steel crankshaft (100mm stroke in 50 or 55mm main).
• Choice of 4340 steel connecting rods w/ARP fasteners for proven reliability.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for ultimate strength and minimal flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• 50% deposit required to get started.
• ACL Race Series bearings sold separately (BC4030 - 50mm / BC4035 - 55mm main)
Turn your big block Honda into a 2.49L monster with a BC stroker kit.
Big gains in horsepower and torque without sacrificing high rpm
potential. Custom CP pistons are made to order so this kit is designed
for turbo, supercharger and or nitrous (low compression) as well as all
motor (14:1+)...depending on your particular requirements.
CRANK #
KIT #
BC0040
BC0040X
BC0040S
BC0040SX
232°/228°
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
LIFT (mm)
Normally Aspirated Specification
BC0042
304°/300° 234°/228° .525"/.472" 13.34/11.99
Hot street/strip or road race spec. Use with
252°/252° 186°/186° .357"/.357"
9.07/9.07
CAI, H, E, ECU, A/F mods. Excellent street
246°/246° 178°/178° .313"/.313"
7.95/7.95
manners and idle quality. Requires kit BC0040.
230°/230°
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
LIFT (inches)
BC0040
BC0040X
BC0040S
BC0040SX
306°/310°
STROKER
KITS
The H22 stroker kit from Brian Crower features:
BC0036
BC0037
BC0038
BC0039
STAGE
DUR @ .050"
Forced Induction Specification
BC0041
296°/300° 222°/224° .520"/.497" 13.21/12.62
Short duration profile builds cylinder
248°/248° 182°/182° .367"/.367"
9.32/9.32
pressure by reducing overlap, high lift
245°/245° 182°/182° .325"/.325"
8.25/8.25
for more air intake. Requires kit BC0040.
296°/300°
Spring Pressure:
BC1030 Seat: 1.460" @ 88 lbs / Open: 0.950" @ 220 lbs / Coil Bind: 0.790" (no machine work required)
For high mileage, daily driver applications (15,000+ miles annually), BC highly recommends the steel retainer for added longevity.
KIT #
2
2
3
ADV DURATION
11.38/10.54
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers are CNC machined from 6AL4V round bar titanium or steel alloy for longevity.
BC0030
BC0030S
STAGE
CAM #
.448"/.415"
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
SPRING #
Cold Valve Lash: .010" int / .012" exh
DESCRIPTION
231°/234°
Rocker Ratio: 1.55:1 mid, 1.5:1 sec, 1.45:1 pri
KIT #
CAMSHAFTS
PART #
DESCRIPTION
BC8004
M.I.D. - H22 Series - 87mm to 90mm Max Bore
Sleeves come in sets of four. MID = Modular Integrated Deck
3
See Price List for complete shelf listings
BC0044
BC0045
BC0048
BC0049
CRANK #
ROD #
PISTON #
BEARING #
BC5048
BC5048
BC5049
BC5049
BC6058
BC6048
BC6059
BC6049
BC7048
BC7048
BC7049
BC7049
BC4020
BC4020
BC4020
BC4020
DESCRIPTION
92mm w/LW Rods
92mm w/HD Rods
102mm w/LW Rods
102mm w/HD Rods
Stock Specifications:
K20A/Z 86mm Bore x 86mm Stroke - 8.350" Block Height
K24A 87mm Bore x 99mm Stroke - 9.114" Block Height
BC Stroker Specifications:
2.35L K20A/Z = 90mm Bore x 92mm Stroke (choice of bore and compression from 9:1 - 14:1)
2.60L K24A = 90mm Bore x 102mm Stroke (choice of bore and compression from 9:1 - 14:1)
Sleeves come in sets of four. MID = Modular Integrated Deck
4
See Price List for complete shelf listings
HONDA CIVIC Si, ACCORD / ACURA RSX
HONDA s2000
k20a3/k24a
f20c/f22c
CAMSHAFTS
Cold Valve Lash: .010" int / .012" exh
DESCRIPTION
STAGE
2
2
STAGE
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
N/A Street & Forced Induction
BC0051
284°/284° 193°/193° .410"/.410" 10.41/10.41
Short duration profile builds cylinder
pressure by reducing overlap, high lift
for more air intake. Requires kit BC0050.
BC0050
or
BC0040
BC0040S
Normally Aspirated Race Spec
BC0052
296°/284° 206°/193° .429"/.410" 10.89/10.41
Hot street/strip or road race specification.
Use with CAI, H, E, ECU, A/F mods. Excellent
street manners. Requires kit BC0050.
BC0050
or
BC0040
BC0040S
USDM K20A3 (Base RSX/Civic)
Stock
270°/276°
181°/173°
.372"/.383"
9.45/9.73
USDM K24A (Accord/CR-V)
Stock
270°/276°
181°/173°
.372"/.383"
9.45/9.73
TIMING EVENTS
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
Rocker Ratio: 1.75:1 mid, 1.7:1 sec, 1.7:1 pri
No valve timing events due to variable intake cam.
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
Dual spring, seat, titanium ret
Dual spring, seat, steel retainer
BC3040
BC3041
BC3042
BC3043
BC3044
BC3045
35.0mm Intake (standard head diameter)
30.0mm Exhaust (standard head diameter)
35.5mm Intake (+.5mm head diameter)
30.5mm Exhaust (+.5mm head diameter)
36.0mm Intake (+1mm head diameter)
31.0mm Exhaust (+1mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers are CNC machined from 6AL4V round bar titanium or steel alloy for longevity.
BC0050
BC0040
BC0040S
BC1050
BC1040
BC1040
RETAINER #
SEAT #
BC2050
BC2010
BC2904
BC2011
BC2904
Spring Pressure:
BC1050 Seat: 1.567" @ 78 lbs / Open: 1.100" @ 206 lbs / Coil Bind: 0.972" (no machine work required)
BC1040 Seat: 1.580" @ 84 lbs / Open: 1.100" @ 250 lbs / Coil Bind: 1.030" (no machine work required)
For high mileage, daily driver applications (15,000+ miles annually), BC highly recommends the steel retainer for added longevity.
STROKER
KITS
The K Series stroker kit from Brian Crower features:
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
Specify one set intake, one set exhaust when ordering. K20A2, K20A3, K24A1 use same valves.
Valve guides vary and may require honing to size.
Note: Keeper groove angles have changed, 05-up may require keeper number BC2940
The BC stroker kit for the Honda/Acura K Series engine platform incorporates
the wider B16A bearing (.935" width) that offers more surface area than the
.740" width bearing found in the OEM K Series crank and rod combination. The
added surface area increases bearing life, especially at extended rpm.
Note: This kit requires custom connecting rods (modified BE bore and BE width).
BC0044
BC0045
BC0048
BC0049
STAGE
2
3
STAGE
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
Forced Induction / All Motor Street
BC0061
Short duration profile builds cylinder
pressure by reducing overlap, high lift
for more air intake. OEM spring OK.
310°/308°
250°/242°
238°/234°
232°/228°
176°/174°
170°/168°
.512"/.492"
.335"/.335"
.313"/.318"
13.00/12.50
8.50/8.50
7.95/8.08
BC0040
or
BC0040S
Normally Aspirated Specification
BC0062
Intended for fully built engine. Extensive
mods, ECU tuning and high compression
pistons are recommended. Requires kit BC0040.
314°/310°
256°/256°
250°/250°
USDM F20C (s2000 ’00-’03)
Stock
300°/298°
226°/222°
.476"/.439"
12.10/11.14
USDM F22C (s2000 ’04-up)
Stock
296°/296°
224°/222°
.466"/.454"
11.84/11.53
244°/240°
190°/190°
184°/184°
.525"/.518"
.369"/.369"
.323"/.323"
13.34/13.15
9.37/9.37
8.20/8.20
BC0040
or
BC0040S
TIMING EVENTS
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
CRANK #
ROD #
PISTON #
BEARING #
BC5048
BC5048
BC5049
BC5049
BC6058
BC6048
BC6059
BC6049
BC7048
BC7048
BC7049
BC7049
BC4020
BC4020
BC4020
BC4020
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Dual spring, seat, titanium ret
Dual spring, seat, steel retainer
BC3060
BC3061
BC3064
BC3065
36.0mm Intake (standard head diameter)
31.0mm Exhaust (standard head diameter)
37.0mm Intake (+1mm head diameter)
32.0mm Exhaust (+1mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers are CNC machined from 6AL4V round bar titanium or steel alloy for longevity.
BC0040
BC0040S
SPRING #
RETAINER #
SEAT #
BC1040
BC1040
BC2010
BC2011
BC2904
BC2904
Spring Pressure:
BC1040 Seat: 1.580" @ 84 lbs / Open: 1.100" @ 250 lbs / Coil Bind: 1.030" (no machine work required).
For high mileage, daily driver applications (15,000+ miles annually), BC highly recommends the steel retainer for added longevity.
BC0068
DESCRIPTION
PART #
DESCRIPTION
BC8005
BC8006
M.I.D. - K20 Series - 87mm to 90mm Max Bore
M.I.D. - K24 Series - 87mm to 90mm Max Bore
Sleeves come in sets of four. MID = Modular Integrated Deck
See Price List for complete shelf listings
5
CRANK #
ROD #
PISTON #
BC5069
BC6068
BC7069
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
ADJUSTABLE
CAM GEARS
BC adjustable cam gears feature anodized, 6061 T6 aluminum hubs,
STROKER
KITS
The F Series (s2000) stroker kit from Brian Crower features:
KIT #
92mm w/LW Rods
92mm w/HD Rods
102mm w/LW Rods
102mm w/HD Rods
Stock Specifications:
K20A/Z 86mm Bore x 86mm Stroke - 8.350" Block Height
K24A 87mm Bore x 99mm Stroke - 9.114" Block Height
BC Stroker Specifications:
2.35L K20A/Z = 90mm Bore x 92mm Stroke (choice of bore and compression from 9:1 - 14:1)
2.60L K24A = 90mm Bore x 102mm Stroke (choice of bore and compression from 9:1 - 14:1)
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
CNC machined to exacting tolerances, 4140 steel, cold rolled (39 tooth)
and heat treated gears and 6 bolt hold downs featuring 12 point nuts.
• BC 4340 billet steel crankshaft (97mm stroke).
• BC 4340 steel billet BC625+ connecting rods w/ARP Custom Age 625+ bolts.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series bearings sold separately (BC4060 - F20C and F22C)
The BC stroker kit for the Honda F Series engine platform incorporates a
97mm stroke that fits both the early model F20C as well as the late model
F22C. Depending on bore size that you decide, the BC kit will take you up
to a 2.47L with 90mm bore. As usual, each BC kit features custom CP
aluminum forged pistons, high strength alloy wrist pins, ring pack and locks.
Available in any desired bore and compression ratio for use in F.I. or NA.
• BC 4340 billet steel crankshaft (92mm K20, 102mm K24 stroke).
• Premium 4340 steel billet, custom connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• High strength ACL copper-lead rod and main bearings included (BC4020).
• Fully system balanced and ready to install.
KIT #
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
Rocker Ratio: 1.72:1 mid, 1.7:1 sec, 1.7:1 pri
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
SPRING #
CAMSHAFTS
PART #
DESCRIPTION
BC8860
s2000 Adjustable Cam Gears (pair)
PART #
DESCRIPTION
BC8007
M.I.D. - F20C - 87mm to 90mm Max Bore
DESCRIPTION
97mm stroke
Stock Specifications:
F20C 87mm Bore x 84mm Stroke - 8.815" Block Height
F22C 87mm Bore x 90.7mm Stroke - 8.815" Block Height
BC Stroker Specifications:
2.47L 90mm Bore x 97mm Stroke (choice of bore and compression from 9:1 - 13.5:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
See Price List for complete shelf listings
6
Sleeves come in sets of four. MID = Modular Integrated Deck. Not available for F22C Block.
MITSUBISHI ECLIPSE / EAGLE TALON
MITSUBISHI EVOLUTION VIII
4g63
4g63
CAMSHAFTS
Cold Valve Lash: .000" int / .000" exh
DESCRIPTION
STAGE
2
3
4
STAGE
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0101
272°/272°
212°/212°
.401"/.381"
10.18/9.66
BC0100
106°
Race/Limited Specification
BC0102
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 106°
mods recommended. Requires kit BC0100.
280°/280°
Full Race Specification
BC0103
Huge valve lift profile designed for the serious
racer. Extensive modifications and tuning
108°
necessary. Requires kit BC0100.
288°/288°
USDM 4G63 (Eclipse/Talon Turbo)
Stock
248°/248°
200°/200°
.349"/.350"
8.86/8.89
USDM 4G63 (Eclipse Non Turbo)
Stock
256°/248°
208°/204°
.365"/.349"
9.27/8.86
218°/216°
.422"/.418"
10.71/10.60
BC0100
222°/222°
.468"/.468"
11.87/11.87
BC0100
TIMING EVENTS
4
-4
BTDC
BTDC
28
36
ABDC
BBDC
7
-2
BTDC
BTDC
31
38
ABDC
BBDC
7
-1
BTDC
BTDC
35
43
ABDC
BBDC
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0100
SPRING #
BC1100
RETAINER #
BC2100
PART #
DESCRIPTION
BC3100
BC3101
BC3102
BC3103
BC3104
BC3105
34.0mm Intake (standard head diameter)
30.5mm Exhaust (standard head diameter)
34.5mm Intake (+.5mm head diameter)
31.0mm Exhaust (+.5mm head diameter)
35.0mm Intake (+1mm head diameter)
31.5mm Exhaust (+1mm head diameter)
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
• BC 4340 billet (7 bolt) or 4340 forged (6 bolt) crankshaft (102mm stroke).
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• High strength steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series bearings sold separately (BC4100 - 7 bolt / BC4105 - 6 bolt)
The BC stroker kit for the Mitsubishi 4G63 engine platform incorporates
a 102mm stroke crank. Depending on bore size that you decide,
the BC kit will take you up to a 2.4L with 86mm bore. The 4G63 kit
utilizes premium steel billet connecting rods in your choice of fastener
(ARP2000 or Custom Age 625+ for severe-duty). As usual, each BC kit
features custom CP pistons, steel alloy wrist pins, full ring pack and locks.
CRANK #
ROD #
PISTON #
BC5105
BC5105
BC5109
BC5109
BC5110
BC6104
BC6105
BC6108
BC6109
BC6110
BC7105
BC7105
BC7109
BC7109
BC7110
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
DESCRIPTION
STROKER
KITS
The 4G63 stroker kit from Brian Crower features:
BC0105
BC0106
BC0108
BC0109
BC0110
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
Single spring, titanium retainer
Spring Pressure:
BC1100 Seat: 1.550" @ 84 lbs / Open: 1.000" @ 235 lbs / Coil Bind: 0.935" (no machine work required)
KIT #
Cold Valve Lash: .000" int / .000" exh
DESCRIPTION
STAGE
2
3
4
STAGE
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0111
272°/272°
206°/206°
.415"/.388"
10.54/9.86
BC0100
106°
Race Specification
BC0112
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 106°
mods recommended. Requires kit BC0100.
280°/280°
Race Specification
BC0113
Huge valve lift profile designed for the serious
racer. Extensive modifications and tuning
108°
necessary. Requires kit BC0100.
288°/288°
USDM 4G63 (Evolution VIII)
Stock
248°/248°
200°/200°
.386"/.367"
9.80/9.32
USDM 4G63 (Evolution IX Mivac)
Stock
256°/248°
206°/200°
.396"/.367"
10.05/9.32
218°/216°
222°/222°
.425"/.408"
.468"/.468"
10.80/10.36
11.87/11.87
BC0100
BC0100
TIMING EVENTS
1
-7
BTDC
BTDC
25
33
ABDC
BBDC
7
-2
BTDC
BTDC
31
38
ABDC
BBDC
7
-1
BTDC
BTDC
35
43
ABDC
BBDC
Rocker Ratio: 1.7:1
Evo IX Mivec camshafts coming soon.
Rocker Ratio: 1.7:1
KIT #
CAMSHAFTS
DESCRIPTION
7
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3100
BC3101
BC3102
BC3103
BC3104
BC3105
34.0mm Intake (standard head diameter)
30.5mm Exhaust (standard head diameter)
34.5mm Intake (+.5mm head diameter)
31.0mm Exhaust (+.5mm head diameter)
35.0mm Intake (+1mm head diameter)
31.5mm Exhaust (+1mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0100
SPRING #
BC1100
RETAINER #
BC2100
Spring Pressure:
BC1100 Seat: 1.550" @ 84 lbs / Open: 1.000" @ 235 lbs / Coil Bind: 0.935" (no machine work required)
STROKER
KITS
The 4G63 stroker kit from Brian Crower features:
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
• BC 4340 billet steel, 7 bolt crankshaft (102mm stroke).
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• High strength steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series rod and main bearings sold separately (BC4100 - Evo)
The BC stroker kit for the Mitsubishi 4G63 engine platform incorporates
a 102mm stroke crank. Depending on bore size that you decide,
the BC kit will take you up to a 2.4L with 86mm bore. The 4G63 kit
utilizes premium steel billet connecting rods in your choice of fastener
(ARP2000 or Custom Age 625+ for severe-duty). As usual, each BC kit
features custom CP pistons, steel alloy wrist pins, full ring pack and locks.
6 bolt w/BC625+
6 bolt w/bRODS
7 bolt w/BC625+
7 bolt w/bRODS
4G64 Block - 106mm stroke
Stock Specifications:
4G63 85mm Bore x 88mm Stroke - 9.010" Block Height
4G64 86mm Bore x 100mm Stroke - 9.252" Block Height
BC Stroker Specifications:
2.4L 86mm Bore x 102mm Stroke (choice of bore and minimum compression of 8.5:1)
2.6L 86.5mm Bore x 106mm Stroke (choice of bore and minimum compression of 8.5:1)
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
KIT #
BC0108
BC0109
BC0110
See Price List for complete shelf listings
CRANK #
ROD #
PISTON #
BC5109
BC5109
BC5110
BC6108
BC6109
BC6110
BC7109
BC7109
BC7110
DESCRIPTION
7 bolt w/BC625+
7 bolt w/bRODS
4G64 Block - 106mm stroke
Stock Specifications:
4G63 85mm Bore x 88mm Stroke - 9.010" Block Height
4G64 86mm Bore x 100mm Stroke - 9.252" Block Height
BC Stroker Specifications:
2.4L 86mm Bore x 102mm Stroke (choice of bore and minimum compression of 8.5:1)
2.6L 86.5mm Bore x 106mm Stroke (choice of bore and minimum compression of 8.5:1)
8
See Price List for complete shelf listings
NISSAN S13 & S14/S15
DODGE NEON / DSM
sr20de(t)
srt-4
CAMSHAFTS
Cold Valve Lash: .000" int / .000" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0161
264°/264°
186°/184°
.350"/.310"
8.89/7.87
BC0160
Race Specification
BC0162
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU
mods recommended. Requires kit BC0160.
272°/272°
USDM SRT-4 (Neon)
256°/256°
Stock
194°/186°
172°/174°
.389"/.383"
.327"/.260"
9.88/9.73
BC0160
TIMING EVENTS
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
CAMSHAFTS
Cold Valve Lash: .000" int / .000" exh
DESCRIPTION
STAGE
2
3
STAGE
8.30/6.60
Rocker Ratio: 1.75:1
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
Street/Strip Specification
BC0201 (S13) 264°/264°
Plug and play application. Short duration BC0205 (S14)
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
216°/216°
.475"/.475"
12.06/12.06
BC0200
Race Specification
BC0202 (S13)
Longer duration profile for added rpm.
BC0206 (S14)
Intended for fully built engine. Tuning and ECU
mods recommended. Requires kit BC0200.
224°/224°
272°/272°
.494"/.494"
12.55/12.55
JDM SR20DET (S14 Black Top)
Stock
248°/248°
191°/191°
.370"/.370"
9.40/9.40
JDM SR20DET (S13 Red Top)
Stock
256°/248°
203°/194°
.399"/.370"
10.13/9.40
BC0200
TIMING EVENTS
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
Rocker Ratio: 1.57:1
BC0201 and BC0202 are compatible with S13 (Red Top). BC0205 and BC0206 are compatible with NVCS intake cam (S14/S15). Note: The above profiles will also work well with solid follower applications.
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3200
BC3201
BC3204
BC3205
BC3207
BC3209
34.15mm Intake (standard head diameter) - FWD/RWD
30.15mm Exhaust (standard head diameter) - FWD
35.15mm Intake (+1mm head diameter) - FWD/RWD
31.15mm Exhaust (+1mm head diameter) - FWD
30.15mm Exhaust (standard head diameter) - RWD
31.15mm Exhaust (+1mm head diameter) - RWD
PART #
DESCRIPTION
BC8020
SR20 Series - 86mm to 90mm Bore
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
PART #
DESCRIPTION
BC3160
BC3161
BC3164
BC3165
BC3166
BC3167
BC3168
BC3169
35mm Intake (Std - single groove keeper)
28.5mm Exhaust (Std - single groove keeper)
36mm Intake (+1mm - single groove keeper)
29.5mm Exhaust (+1mm - single groove keeper)
35mm Intake (Std - triple groove keeper)
28.5mm Exhaust (Std - triple groove keeper)
36mm Intake (+1mm - triple groove keeper)
29.5mm Exhaust (+1mm - triple groove keeper)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers and spring seats are CNC machined from 6AL4V titanium to exacting tolerances.
BC0160
BC0159
SPRING #
BC1100
BC1100
RETAINER #
DESIGN
DESCRIPTION
BC2160 Single Groove Keeper Single spring, titanium retainer
BC2159 Triple Groove Keeper Single spring, titanium retainer
Spring Pressure:
BC1100 Seat: 1.500" @ 92 lbs / Open: 1.100" @ 210 lbs / Coil Bind: 0.920" (when used with BC2160 retainer)
BC1100 Seat: 1.550" @ 84 lbs / Open: 1.100" @ 204 lbs / Coil Bind: 0.970" (when used with BC2159 retainer)
swirl polished for ultimate air flow. Available in 2.0L/Neon single groove
keeper design and OEM SRT-4 triple groove keeper design.
BC0200
BC0208
BC0209
designed for high horsepower forced induction engines and available in choice of
ARP2000 fasteners or premium grade, ARP Custom Age 625+ for severe-duty use.
ROD #
PISTON #
BC6168
BC6169
BE WIDTH
PE BORE
ARP BOLT
5.945"
5.945"
2.086"
2.086"
1.031"
1.031"
0.866" Cust Age 625+
0.866"
ARP2000
CP7500
CP7501
BC2200
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size. RWD exh features 7mm stem tapered to 6mm tip.
BORE SIZE
OVERSIZE
COMPRESSION
PIN BORE
DESCRIPTION
87.5mm
88mm
Standard
+.5mm/.020"
8.5:1
8.5:1
0.866"
0.866"
Turbo
Turbo
CRANK #
ROD #
PISTON #
BC5208
BC5209
BC6208
BC6209
BC7209
BC7209
DESCRIPTION
w/BC625+ Rods
w/bRODS
Stock Specifications:
SR20 86mm Bore x 86mm Stroke - 8.317" Block Height
BC Stroker Specifications:
2.35L 90mm Bore x 91mm Stroke (choice of bore and minimum compression of 9.6:1)
Note: If running over 650 flywheel horsepower, highly recommend BC625+ rods (Kit BC6208).
Crankshafts, connecting rods and pistons with all hardware are sold separately.
Sleeves come in sets of four.
See Price List for complete shelf listings
9
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
• BC 4340 billet steel crankshaft (91mm stroke).
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series rod, main, thrust bearings sold separately (BC4200)
The BC stroker kit for the Nissan SR20DE(T) engine incorporates a
91mm stroke, steel billet crankshaft. Depending on bore size that you
decide, the BC kit will take you up to a 2.35L with a 90mm bore,
recommend 89mm bore for big boost (20 lbs +) applications.
The SR20DE(T) kit utilizes premium steel billet connecting rods. As
usual, each BC kit features custom CP pistons, wrist pins, full ring pack.
and locks. Big time horsepower and torque gains.
Made from premium 2618 aluminum forgings that are application specific, CP
pistons feature CNC craftsmanship, made to only the highest tolerances. Each set
includes pistons, 5100 series steel alloy wrist pins, full ring pack and wire locks.
BE BORE
Spring Pressure:
BC1200 Seat: 1.550" @ 90 lbs / Open: 1.025" @ 220 lbs / Coil Bind: 0.910" (no machine work required)
KIT #
C-TO-C
BC1200
RETAINER #
STROKER
KITS
The SR20DE(T) stroker kit from Brian Crower features:
Note: Single groove valves require keeper/lock part number BC2960
4340
STEEL BILLET RODS
Built from rugged 4340 billet steel, BC Pro Billet rods for the Dodge SRT-4 are
SPRING #
10
NISSAN 350Z / INFINITI G35
NISSAN 240SX/S13 & S14
vq35de
ka24de
CAMSHAFTS
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0211
264°/264°
218°/218°
.375"/.375"
9.52/9.52
BC0210
114°
Race Specification
BC0212
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0210.
272°/272°
USDM KA24DE (240SX)
256°/256°
Stock
226°/226°
203°/207°
.401"/.401"
.344"/.357"
10.19/10.19
BC0210
TIMING EVENTS
-1
-9
BTDC
BTDC
39
47
ABDC
BBDC
3
-5
BTDC
BTDC
43
51
ABDC
BBDC
CAMSHAFTS
STAGE
2
3
STAGE
8.73/9.06
Bucket Diameter: 1.218"
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Dual spring, titanium retainer/seat
BC3210
BC3211
37.10mm Intake (+.5mm head diameter)
31.80mm Exhaust (+.5mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers and spring seats are CNC machined from 6AL4V titanium to exacting tolerances.
BC0210
SPRING #
RETAINER #
SEAT #
BC1010
BC2210
BC2921
Spring Pressure:
BC1010 Seat: 1.400" @ 73 lbs / Open: 1.000" @ 200 lbs / Coil Bind: 0.940" (no machine work required)
Maximum lift on stock valve springs is .380".
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Oversize head diameter only.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0221
264°/264°
222°/222°
.426"/.426"
10.82/10.82
BC0220
Race Specification
BC0222
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU
mods recommended. Requires kit BC0220.
272°/272°
VQ35DE (Nissan 350Z)
Stock
256°/256°
208°/208°
.375"/.375"
9.52/9.52
VQ35DE (Infiniti G35)
Stock
258°/256°
210°/208°
.378"/.375"
9.60/9.52
KIT #
BC0218
BC0219
CRANK #
ROD #
PISTON #
BC5219
BC5219
BC6218
BC6219
BC7219
BC7219
11.59/11.59
-
-
ABDC
BBDC
BC0220
DESCRIPTION
-
BBDC
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3220
BC3221
BC3224
BC3225
37.0mm Intake (standard head diameter)
31.0mm Exhaust (standard head diameter)
38mm Intake (+1mm head diameter)
32mm Exhaust (+1mm head diameter)
PART #
DESCRIPTION
BC8022
M.I.D. - VQ35DE - 95mm to 100mm Max Bore
BC0220
BC0225
BC0226
BC0229
See Price List for complete shelf listings
SPRING #
BC1220
RETAINER #
BC2220
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
CRANK #
ROD #
PISTON #
BC5225
BC5225
BC5229
BC6228
BC6229
BC6225
BC7229
BC7229
BC7229
DESCRIPTION
86.4mm stroke w/BC625+ Rods
86.4mm stroke w/bRODS
88mm stroke w/Custom Rods
Stock Specifications:
VQ35 95.5mm Bore x 81.4mm Stroke - 8.440" Block Height
BC Stroker Specifications:
4.15L 100mm Bore x 88mm Stroke (choice of bore and minimum compression of 9:1 to 14:1)
4.10L 100mm Bore x 86.4mm Stroke (choice of bore and minimum compression of 9:1 to 14:1)
Note: Kits are available unbalanced also, specify "U" after kit part number if self balancing.
Crankshafts, connecting rods and pistons with all hardware are sold separately.
Sleeves come in sets of six. MID = Modular Integrated Deck
11
ATDC
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
KIT #
Stock Specifications:
KA24DE 89mm Bore x 96mm Stroke - 9.725" Block Height
BC Stroker Specifications:
2.65L 91mm Bore x 102mm Stroke (choice of bore and minimum compression of 8.5:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
BTDC
ABDC
• BC 4340 billet steel crankshaft (88mm or 86.4mm stroke).
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy, upgraded wrist pins come standard.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install or sold for self balancing.
• ACL Race Series rod, main, thrust bearings sold separately (BC4220)
The BC stroker kit for the Nissan VQ35DE engine platform incorporates a
88mm or 86.4mm stroke, billet crank. Depending on bore size that you
decide, the BC kit will take you up to a 4.15L with 100mm bore. As
usual, each BC kit features custom CP aluminum forged pistons,
9310 alloy wrist pins, ring pack and buttons. Available in any desired bore
and compression ratio for use in turbo or normally aspirated.
w/BC625+ Rods
w/bRODS Rods
ATDC
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STROKER
KITS
The Nissan/Infiniti VQ35DE stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (102mm stroke) that is fully counterweighted.
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series rod, main, thrust bearings sold separately (BC4210)
The BC stroker kit for the Nissan KA24DE engine platform incorporates
a 102mm stroke crankshaft. Depending on bore size that you decide,
the BC kit will take you up to a 2.65L with 91mm bore. The KA24 kit
utilizes premium steel billet connecting rods. As usual, each BC kit features
custom CP pistons, highest quality, steel alloy wrist pins, full ring pack and
buttons and choice of rods, BC625+ for severe-duty or the bROD for budget.
.459"/.459"
BTDC
Bucket Diameter: 1.200"
Fits 2003-up, non Rev-Up engine. No valve timing events due to variable intake cam.
Spring Pressure:
BC1220 Seat: 1.425" @ 80 lbs / Open: 0.990" @ 192 lbs / Coil Bind: 0.900" (no machine work required)
STROKER
KITS
The KA24 stroker kit from Brian Crower features:
234°/234°
TIMING EVENTS
See Price List for complete shelf listings
12
NISSAN SKYLINE
NISSAN PATROL 4.8L
STROKER
KITS
The Nissan Skyline RB25/RB26 stroker kit from Brian Crower features:
CAMSHAFTS
tb48
rb25/rb26
STAGE
2
3
STAGE
The BC stroker kit for the Nissan Skyline RB25/RB26 engine platform
incorporates a 79mm stroke, steel billet crank. Depending on bore
size that you decide, the BC kit will take you up to a 2.85L with 87.5mm
bore (Darton sleeved block). As usual, each BC kit features custom CP
aluminum forged pistons, 9310 alloy wrist pins, ring pack and buttons.
Available in any desired bore and compression ratio.
KIT #
BC0239
CRANK #
ROD #
BC5239
BC6238
PISTON #
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
• BC 4340 billet steel crankshaft (79mm stroke).
• 4340 steel billet, Pro Series connecting rods with ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy wrist pins.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series rod, main, thrust bearings sold separately (BC4230)
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0251
264°/264°
230°/222°
.406"/.401"
10.31/10.19
BC0250
114°
Race Specification
BC0252
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0250.
272°/272°
TB48 (Nissan Patrol)
256°/256°
Stock
234°/230°
214°/206°
.406"/.425"
.392"/.376"
10.31/10.79
BC0250
TIMING EVENTS
5
-7
BTDC
BTDC
45
49
ABDC
BBDC
7
-3
BTDC
BTDC
47
53
ABDC
BBDC
9.95/9.55
Bucket Diameter: 1.200"
DESCRIPTION
BC7239 79mm stroke
Stock Specifications:
RB26 86mm Bore x 73.7mm Stroke - 7.427" Block Height
RB25 86mm Bore x 71.7mm Stroke - 7.427" Block Height
BC Stroker Specifications:
2.85L 87.5mm Bore x 79mm Stroke (choice of bore and minimum compression of 8.5:1 to 9.5:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
PART #
DESCRIPTION
BC8023
RB26 - 87mm to 87.5mm Max Bore
Sleeves come in sets of six.
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3250
BC3251
BC3252
BC3253
Stainless Intake Valves (set/12) - (Std - 38.5mm)).
Stainless Exhaust Valves (set/12) - (Std - 33.5mm).
Stainless Intake Valves (set/12) - (+1mm - 39.5mm)).
Stainless Exhaust Valves (set/12) - (+1mm - 34.5mm).
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0250
SPRING #
BC1250
RETAINER #
BC2250
Spring Pressure:
BC1250 Seat: 1.550" @ 80 lbs / Open: 1.050" @ 220 lbs / Coil Bind: 0.900" (no machine work required)
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
STROKER
KITS
The Nissan Patrol TB48 stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (108mm stroke).
• 4340 steel billet, custom Pro Series connecting rods w/ARP 220,000 psi fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy wrist pins.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• ACL Race Series rod and main bearings (Big Block Chevrolet).
• Fully system balanced and ready to install.
The BC stroker kit for the Nissan Patrol TB48 engine platform
incorporates a 108mm stroke, steel billet crank. Depending on bore
size that you decide, the BC kit will take you up to a 5.15L with 100.5mm
bore. As usual, each BC kit features custom CP aluminum forged pistons,
9310 alloy wrist pins, ring pack and buttons. Available in any desired bore
and compression ratio for use in turbo or normally aspirated.
KIT #
BC0259
CRANK #
ROD #
PISTON #
BEARING #
BC5259
BC6258
BC7259
BC4250
DESCRIPTION
108mm stroke
Stock Specifications:
TB48 99.5mm Bore x 102mm Stroke - 10.059" Block Height
BC Stroker Specifications:
5.15L 100.5mm Bore x 108mm Stroke (choice of bore and minimum compression of 9:1 to 14:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
See Price List for complete shelf listings
13
See Price List for complete shelf listings
14
TOYOTA SUPRA MK IV
LEXUS IS300
2jzgte
2jzge
CAMSHAFTS
Cold Valve Lash: .006" int / .008" exh
DESCRIPTION
STAGE
2
3
3
STAGE
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0301
264°/264°
218°/222°
.375"/.375"
9.52/9.52
BC0300
114°
Race Specification
BC0302
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0300.
272°/272°
Full Race Specification
BC0303
Giant lift profile for ultimate cylinder fill rates.
Intended for full race motor running race fuel. 114°
Requires kit BC0300.
280°/280°
2JZGTE (Toyota Supra ’93-’98)
248°/248°
Stock
228°/229°
.406"/.415"
10.31/10.54
BC0300
232°/232°
200°/204°
.425"/.425"
.339"/.346"
10.79/10.79
BC0300
TIMING EVENTS
-1
-7
BTDC
BTDC
39
49
ABDC
BBDC
4
-3.5
BTDC
BTDC
44
52.5
ABDC
BBDC
6
-2
BTDC
BTDC
46
54
ABDC
BBDC
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
KIT #
BC0300
SPRING #
BC1300
RETAINER #
BC2300-24
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
swirl polished for ultimate air flow. Hardened tips for greater longevity.
Standard and oversize head design available.
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3300
BC3301
BC3302
BC3303
33.6mm Intake (standard head diameter)
29.0mm Exhaust (standard head diameter)
34.6mm Intake (+1mm head diameter)
30.0mm Exhaust (+1mm head diameter)
Spring Pressure:
BC1300 Seat: 1.325" @ 80 lbs / Open: 0.980" @ 158 lbs / Coil Bind: 0.810" (no machine work required)
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
STROKER
KITS
The Toyota 2JZGTE stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (94mm stroke).
• Choice of 4340 steel billet connecting rods (BC625+, Carrillo, Manley)
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy, upgraded wrist pins come standard.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• Oil pump drive gear sold separately (BC8830)
• ACL Race Series bearings sold separately (BC4300)
The BC stroker kit for the Toyota 2JZGTE engine platform is used by
the top teams in Sport Compact drag racing. Incorporates a 94mm
stroke, steel billet crank. Depending on bore size that you decide, the
BC kit will take you up to a 3.4L with 87mm bore. As usual, each BC
kit features custom CP aluminum forged pistons, 9310 alloy wrist
pins, ring pack and buttons. Built for high horsepower and torque.
KIT #
BC0309
BC0308
CRANK #
ROD #
PISTON #
BC5309
BC5309
BC6309
CA6308
BC7309
BC7309
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0311
264°/264°
218°/218°
.344"/.344"
8.74/8.74
BC0300
114°
Race Specification
BC0312
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0300.
272°/272°
2JZGE (Lexus IS300)
248°/248°
Stock
229°/231°
.375"/.380"
9.52/9.65
BC0300
200°/194°
.337"/.327"
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
8.56/8.31
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3300
BC3301
BC3302
BC3302
33.6mm Intake (standard head diameter)
29.0mm Exhaust (standard head diameter)
34.6mm Intake (+1mm head diameter)
30.0mm Exhaust (+1mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0300
SPRING #
BC1300
RETAINER #
BC2300-24
Spring Pressure:
BC1300 Seat: 1.325" @ 80 lbs / Open: 0.980" @ 158 lbs / Coil Bind: 0.810" (no machine work required)
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size.
STROKER
KITS
The Toyota 2JZGTE stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (94mm stroke).
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy, upgraded wrist pins come standard.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• Oil pump drive gear sold separately (BC8830)
• ACL Race Series bearings sold separately (BC4300)
The BC stroker kit for the Toyota 2JZGTE engine platform is used by
the top teams in Sport Compact drag racing. Incorporates a 94mm
stroke, steel billet crank. Depending on bore size that you decide, the
BC kit will take you up to a 3.4L with 87mm bore. As usual, each BC
kit features custom CP aluminum forged pistons, 9310 alloy wrist
pins, ring pack and buttons. Built for high horsepower and torque.
BC0309
BC0308
CRANK #
ROD #
PISTON #
BC5309
BC5309
BC6309
CA6308
BC7309
BC7309
DESCRIPTION
BC625+ Rod
Carrillo Rod
Stock Specifications:
2JZGE 86mm Bore x 86mm Stroke - 8.620" Block Height
DESCRIPTION
BC625+ Rod
Carrillo Rod
For LightWeight crank (15 lbs less), specify "LW" after stroker kit part number (ex. BC0309LW).
BC Stroker Specifications:
3.4L 87mm Bore x 94mm Stroke (choice of bore and minimum compression of 8.5:1 up to 13.5:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
Stock Specifications:
2JZGTE 86mm Bore x 86mm Stroke - 8.620" Block Height
For LightWeight crank (15 lbs less), specify "LW" after stroker kit part number (ex. BC0309LW).
See Price List for complete shelf listings
15
BTDC
Bucket Diameter: 1.200"
No valve timing events due to variable intake cam.
KIT #
BC Stroker Specifications:
3.4L 87mm Bore x 94mm Stroke (choice of bore and minimum compression of 8.5:1 to 9:1)
Crankshafts, connecting rods and pistons with all hardware are sold separately.
TIMING EVENTS
8.61/8.79
Bucket Diameter: 1.200"
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
CAMSHAFTS
16
See Price List for complete shelf listings
FORD MODULAR
TOYOTA SUPRA MK III
4.6/5.4
7mgte
CAMSHAFTS
Cold Valve Lash: .008" int / .010" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0321
264°/264°
220°/220°
.336"/.336"
8.53/8.53
BC0320
Race Specification
BC0322
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU
mods recommended. Requires kit BC0320.
272°/272°
USDM 7MGTE (’87-’92 MKIII)
256°/256°
Stock
226°/226°
.342"/.342"
201°/201°
8.68/8.68
.297"/.297"
BC0320
TIMING EVENTS
-
-
BTDC
ATDC
-
-
ABDC
BBDC
-
-
BTDC
ATDC
-
-
ABDC
BBDC
7.54/7.54
Bucket Diameter: 0.980"
STROKER
KITS
The Ford Modular (4.6L and 5.4L) stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (3.800" stroke - 4.6L or 4.415" stroke - 5.4L).
• Manley 4340 steel billet, H-Beam or Pro Series connecting rods with ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 9310 nickel carbon steel alloy wrist pins.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• Fully system balanced and ready to install.
• ACL Race Series rod, main, thrust bearings sold separately (BC4400 - 4.6L & 5.4L)
The BC stroker kit for the Ford Modular (4.6L and 5.4L) engine platform
incorporates a 3.800" stroke, 4340 steel billet crank. Depending on bore
size that you decide, the BC kit will take you up to a 2.85L with 87.5mm
bore (Darton sleeved block). As usual, each BC kit features custom CP
aluminum forged pistons, 9310 alloy wrist pins, ring pack and buttons.
Available in any desired bore and compression ratio.
KIT #
BC0408
BC0409
BC0428
BC0429
CRANK #
ROD #
PISTON #
DESCRIPTION
BC5409
BC5409
BC5429
BC5429
BC6408
BC6409
BC6428
BC6429
BC7409
BC7409
BC7429
BC7409
4.6L w/Manley Turbo-Tuff
4.6L w/Manley H-Beam
5.4L w/Manley Turbo-Tuff
5.4L w/Manley H-Beam
Stock Specifications:
4.6L 3.552" Bore x 3.540" Stroke - 8.937" Block Height
5.4L 3.552" Bore x 4.165" Stroke - 10.079" Block Height
BC Stroker Specifications:
4.6L to 5.47L - 3.740" Bore x 3.800" Stroke (choice of bore and compression, bore is achieved w/sleeved block)
5.4L to 6.36L - 3.740" Bore x 4.415" Stroke (choice of bore and compression, bore is achieved w/sleeved block)
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3320
BC3321
BC3322
BC3323
BC3324
BC3325
32mm Intake (Std head diameter)
27.5mm Exhaust (Std head diameter)
32.5mm Intake (+.5mm head diameter)
28mm Exhaust (+.5mm head diameter)
33mm Intake (+1mm head diameter)
28.5mm Exhaust (+1mm head diameter)
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC retainers and spring seats are CNC machined from 6AL4V titanium to exacting tolerances.
BC0320
SPRING #
BC1320
RETAINER #
BC2320
Spring Pressure:
BC1320 Seat: 1.325" @ 60 lbs / Open: 0.950" @ 153 lbs / Coil Bind: 0.880" (no machine work required)
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Oversize head diameter only.
See Price List for complete shelf listings
4340
STEEL BILLET RODS
Built from rugged 4340 billet steel, BC rods for the 7MGTE are designed for high
horsepower forced induction applications. Available in your choice of ARP fasteners,
either ARP2000 for budget considerations or Custom Age 625+ for severe-duty.
Made from premium 2618 aluminum forgings that are application specific, CP
pistons feature CNC craftsmanship, made to only the highest tolerances. Each set
includes pistons, 9310 nickel carbon alloy wrist pins, full ring pack and wire locks.
ROD #
PISTON #
BORE SIZE
OVERSIZE
COMPRESSION
PIN BORE
DESCRIPTION
CP7470
84mm
+1mm
8.4:1
0.866"
Turbo
BC6328
BC6329
C-TO-C
BE BORE
BE WIDTH
PE BORE
5.980"
5.980"
2.166"
2.166"
0.977"
0.977"
0.866" Cust Age 625+
0.866"
ARP2000
BOLTS
17
18
PART #
DESCRIPTION
BC8040
BC8046
M.I.D. - 4.6L - 92mm to 95mm Max Bore
M.I.D. - 5.4L - 92mm to 95mm Max Bore
Sleeves come in sets of eight. MID = Modular Integrated Deck
SUBARU STi
SUBARU WRX
ej257
ej205
CAMSHAFTS
Cold Valve Lash: .006" int / .008" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0601
272°/272°
220°/220°
.400"/.400"
10.16/10.16
BC0600
114°
Race Specification
BC0602
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0600.
280°/280°
USDM EJ205 (’02-’04 WRX)
Stock
256°/256°
205°/205°
.365"/.361"
JDM EJ207
Stock
256°/256°
205°/210°
.325"/.339"
234°/234°
.410"/.410"
TIMING EVENTS
0
-8
BTDC
BTDC
40
48
ABDC
BBDC
CAMSHAFTS
Cold Valve Lash: .006" int / .008" exh
DESCRIPTION
STAGE
2
3
STAGE
Street/Strip Specification
Plug and play application. Short duration
for nice street manners, slight lope at idle.
Excellent all purpose spec. OEM spring OK.
CAM #
ADV DURATION
DUR @ .050"
LIFT (inches)
LIFT (mm)
KIT #
BC0621
272°/272°
220°/220°
.400"/.400"
10.16/10.16
BC0600
114°
Race Specification
BC0622
Longer duration profile, added rpm potential.
Intended for fully built engine. Tuning and ECU 114°
mods recommended. Requires kit BC0600.
280°/280°
9.27/9.17
USDM EJ257 (’05-up STi)
Stock
256°/256°
204°/208°
.378"/.385"
9.60/9.78
8.25/8.61
JDM EJ254
Stock
256°/256°
211°/209°
.374"/.371"
9.50/9.42
10.80/10.80
BC0600
7
-1
BTDC
BTDC
47
55
ABDC
BBDC
234°/234°
.410"/.410"
10.41/10.41
BC0600
TIMING EVENTS
0
-8
BTDC
BTDC
40
48
ABDC
BBDC
7
-1
BTDC
BTDC
47
55
ABDC
BBDC
Bucket Diameter: 1.220"
The above cams work with AVCS.
Bucket Diameter: 1.220"
The above intake cams will not work with AVCS (EJ207 or EJ257).
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
VALVE
SPRING/RETAINER KIT
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean,
STAINLESS
STEEL VALVES
BC valves are made from premium stainless steel, fully machined and
KIT #
DESCRIPTION
PART #
DESCRIPTION
KIT #
DESCRIPTION
PART #
DESCRIPTION
Single spring, titanium retainer
BC3600
BC3601
BC3604
BC3605
36.0mm Intake (standard head diameter)
32.0mm Exhaust (standard head diameter)
37.0mm Intake (+1mm head diameter)
33.0mm Exhaust (+1mm head diameter)
BC0600
Single spring, titanium retainer
BC3600
BC3601
BC3604
BC3605
36.0mm Intake (standard head diameter)
32.0mm Exhaust (standard head diameter)
37.0mm Intake (+1mm head diameter)
33.0mm Exhaust (+1mm head diameter)
PART #
DESCRIPTION
BC8062
EJ25 (STi) - 99.5mm to 102mm Max Bore
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
BC0600
SPRING #
BC1600
RETAINER #
BC2300-16
Spring Pressure:
BC1600 Seat: 1.420" @ 60 lbs / Open: 1.000" @ 160 lbs / Coil Bind: 0.860" (no machine work required)
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size. EJ20 and EJ25 valves are the same.
STROKER
KITS
The EJ20 stroker kit from Brian Crower features:
chrome silicone alloy and feature proprietary processing procedures for consistent pressures.
BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
SPRING #
BC1600
RETAINER #
BC2300-16
Spring Pressure:
BC1600 Seat: 1.420" @ 60 lbs / Open: 1.000" @ 160 lbs / Coil Bind: 0.860" (no machine work required)
Specify one set intake, one set exhaust when ordering.
Valve guides vary and may require honing to size. EJ20 and EJ25 valves are the same.
STROKER
KITS
The EJ25 stroker kit from Brian Crower features:
• BC 4340 billet steel crankshaft (83mm stroke). Not a reworked OEM EJ25 crank.
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• ACL Race Series bearings sold separately (BC4600).
• Fully system balanced and ready to install.
• BC 4340 billet steel crankshaft (79mm stroke). Not an OEM EJ25 crank.
• Choice of 4340 steel billet connecting rods w/ARP fasteners.
• CP aluminum forged pistons (any bore size, any compression ratio).
• 5100 series steel alloy wrist pins for added longevity and reduced flex.
• Ductile iron plasma top rings, tapered second ring, low tension oil rings.
• ACL Race Series bearings sold separately (BC4600).
• Fully system balanced and ready to install.
The BC stroker kit for the Subaru EJ20 engine incorporates a proven
79mm stroke, steel billet crankshaft, not a factory STi or EJ25 crank.
Depending on bore size that you decide, the BC kit will take you up to
a 2.29L with a safe 96mm bore (Darton). As usual, each BC kit features
custom CP forged aluminum pistons, premium alloy wrist pins, full ring
pack and buttons. Big time power and torque gains.
The BC stroker kit for the Subaru EJ25 engine incorporates a big
83mm stroke, steel billet crankshaft, not a reworked EJ25 crank.
Depending on bore size that you decide, the BC kit will take you up to
a 2.71L with a safe 102mm bore (Darton). As usual, each BC kit features
custom CP forged aluminum pistons, premium alloy wrist pins, full ring
pack and buttons. Big time power and torque gains.
KIT #
DESCRIPTION
KIT #
w/BC625+ Rods
w/bROD
BC0628
BC0629
BC0608
BC0609
CRANK #
ROD #
PISTON #
BC5609
BC5609
BC6608
BC6609
BC7609
BC7609
Stock Specifications:
EJ20 92mm Bore x 75mm Stroke - 7.913" Block Height
BC Stroker Specifications:
2.29L 96mm Bore x 79mm Stroke (choice of bore and minimum compression of 8.5:1)
Note: If running over 650 flywheel horsepower, highly recommend BC625+ rods (BC6608).
Crankshafts, connecting rods and pistons with all hardware are sold separately.
See Price List for complete shelf listings
swirl polished for ultimate air flow. Dished head for added weight savings
and increased valve control at high rpm. Standard and oversize head.
PART #
DESCRIPTION
BC8060
EJ20 (WRX) - 92mm to 96mm Max Bore
Sleeves come in sets of four.
19
CRANK #
ROD #
PISTON #
BC5629
BC5629
BC6608
BC6609
BC7629
BC7629
DESCRIPTION
w/BC625+ Rods
w/bROD
Stock Specifications:
EJ25 99.5mm Bore x 79mm Stroke - 7.913" Block Height
BC Stroker Specifications:
2.71L 102mm Bore x 83mm Stroke (choice of bore and minimum compression of 8.5:1)
Note: If running over 650 flywheel horsepower, highly recommend BC625+ rods (BC6608).
Crankshafts, connecting rods and pistons with all hardware are sold separately.
See Price List for complete shelf listings
Sleeves come in sets of four.
20
SPRING/RETAINER
KITS
BC valve spring and titanium retainers kits are system matched to work in
4340
STEEL BILLET RODS
Made from premium, 4340 steel billet material, BC connecting rods are
unison to deliver better valve control at extended rpm's and allow for greater
lift camshafts for added performance and reliability.
RETAINER #
ENGINE MAKE
BC0010
BC0020
BC0030
BC0040
BC0040S
BC0040X
BC0040SX
BC0050
BC0100
BC0159 BC0160
BC0200
BC0210
BC0220
BC0240
BC0250
BC0300
BC0320
BC0600
Honda/Acura B16A/B18C
Dual
Acura B18A/B
Dual
Honda H22
Dual
Honda K20A2/Z3 Dual, Ti Ret, Seat
Honda K20A2/Z3
Dual, Steel Ret, Seat
Honda K20A2/Z3Dual, Ti Ret, No Seat
Honda K20A2/Z3Dual,Steel Ret,No Seat
Honda K20A3/K24A
Single
Mitsubishi/DSM 4G63
Single
Dodge SRT-4 (Triple Groove)
Single
Dodge Neon (Single Groove) Single
Nissan SR20DE(T)
Single
Nissan KA24DE Dual w/Seat
Nissan VQ35DE
Single
Nissan SR20VE
Dual
Nissan TB48 (Patrol)
Single
Toyota 2JZGTE/GE
Single
Toyota 7MGTE/GE
Single
Subaru EJ205 / EJ257
Single
VALVE
SPRINGS
Designed for high rpm, BC valve springs are wound from only the highest grade,
super clean, chrome silicone alloy and feature proprietary processing procedures
(chamfer, debur, etc...) for consistent pressures over long term, high rpm usage.
Quality valve springs are critical in the prevention of premature valve float.
Retainers are available in bulk
purchases (500 pcs or more). Contact
BC for pricing and availability.
TITANIUM
RETAINERS
The ultimate in lightweight high performance, BC titanium retainers typically
ENGINE MAKE
BC2010
BC2011
BC2020
BC2050
BC2100
BC2159
BC2160
BC2200
BC2205
BC2210 BC2220
BC2250
BC2300
BC2320
BC2600
Honda/Acura B16A/B18C, H22, K20/K24, F20C/F22C
Steel - Honda B16A/B18C, H22, K20/K24, F20C/F22C
Acura B18A / B18B - set/16
Acura K20A3 / K24A - set/16
Mitsubishi 4G63 (1st/2nd Gen, Evo) - Set/16
Dodge SRT-4 (Triple Groove Valve/Locks) - Set/16
Dodge/DSM Neon (Single Groove Valve) - Set/16
Nissan SR20DET - set/16
Nissan SR20VE - set/16
Nissan KA24 - set/16
Nissan VQ35DE - set/24
Nissan TB48 - set/24
Toyota 2JZGTE / 2JZGE - set/24
Toyota 7MGTE - set/24
Subaru EJ205 / EJ257 - set/16
Honda B16A / Acura B18C / Nissan KA24 - set/16
Acura B18A / B18B - set/16
Honda H22 / H22A / Nissan SR20VE - set/16
Honda K Series (K20/K24), F20C/F22C - Set/16
Honda K20A3 / K24A - Set/16
Mitsubishi 4G63 (1st/2nd Gen, Evo) - Set/16
Nissan SR20DET - set/16
Nissan VQ35DE - set/24
Nissan TB48 - set/24
Toyota 2JZGTE / 2JZGE - set/24
Toyota 7MGTE - set/24
Subaru EJ205 / EJ257 - set/16
TYPE
Dual
Dual
Dual
Dual
Single
Single
Single
Single
Single
Single
Single
Single
The above valve springs are available in bulk purchases (500 pcs or more). Contact BC for pricing.
installation and operation, all products sold by Brian Crower Inc. are sold
without any expressed warranty or any implied warranty of merchantability
or fitness for a particular purpose. Brian Crower Inc. shall not, under any
circumstances, be liable for any special, incidental or consequential damages,
including, but not limited to, damages or loss of other property or equipment,
loss of profits or revenue, cost of purchased or replacement goods, or claims
of customers of the purchaser which may arise and/or result from the sale,
installation or use of these parts. Brian Crower Inc. reserves the right to
make product improvements or changes without notice and without incurring
liability with respect to similar products previously manufactured.
STEM SIZE
5.5mm
5.5mm
6.5mm
5.5mm
6.5mm
6.0mm
6.0mm
6.0mm
6.0mm
7.0mm
6.0mm
6.0mm
6.0mm
6.0mm
6.0mm
ENGINE MAKE
BC1010
BC1020
BC1030
BC1040
BC1050
BC1100
BC1200
BC1220
BC1250
BC1300
BC1320
BC1600
WARRANTY
DISCLAIMER
Due to the nature of performance applications and lack of control during
weigh in approximately 40% less than the factory OEM steel units. CNC
machined for premium 6AL4V titanium bar stock to exacting tolerances,
RETAINER #
SPRING #
Brian Crower Inc. warranties are void when said Brian Crower product in question has been physically altered, improperly installed or used or otherwise
damaged due to no fault of Brian Crower Inc. or has not been used for the
said purpose it was intended or for which it was designed. Brian Crower Inc.
does not warrant the performance of the products due to Brian Crower Inc.
lack of control during product installation and usage.
These products are designed primarily for off highway use. Check State and
Federal laws and emissions regulations.
21
Please visit www.briancrower.com for complete details.
available in two distinct styles depending on horsepower, budget and engine
application, but both include the exclusive BC oiling groove in the pin bushing
for added oiling. The bROD Series is intended for moderate boost applications
and all motor race applications where peak horsepower is not going to exceed
700 at the flywheel. Utilizes venerable ARP2000 fasteners. The BC625+
Series rods are designed for high horsepower, high boost and extreme rpm
applications where nothing but the best rod will do. Features include ARP's
premium Custom Age 625+ bolt rated to 280,000 p.s.i. for ultimate fastening
capabilities as well as aluminum-bronze bushings to insure long, reliable
service, no matter what the boost, nitrous or rpm.
ROD #
BC6018
BC6028
BC6026
BC6025
BC6019
BC6029
BC6038
BC6039
BC6044
BC6048*
BC6049*
BC6045
BC6049*
BC6059*
BC6068
BC6069
BC6104
BC6105
BC6108
BC6109
BC6168
BC6169
BC6208
BC6209
BC6218
BC6219
BC6225
BC6228
BC6229
BC6238
BC6258
BC6259
BC6309
BC6328
BC6329
ENGINE MAKE
C-TO-C
Honda B16A - bROD 5.290"
Honda B16A - 625+ 5.290"
Acura B18C - bROD 5.433"
Acura B18C - 625+ 5.433"
Acura B18A/B - bROD 5.394"
Acura B18A/B - 625+ 5.394"
Honda H22 - 625+ 5.636"
Honda H22 - bROD 5.636"
Honda K20A/Z - 625+ 5.473"
Honda K20A/Z - Cust 5.473"
Honda K20A/Z - LW 5.473"
Honda K24 - 625+ 5.985"
Honda K24 - Custom 5.985"
Honda K24 - LW Cust 5.985"
Honda F22C - 625+ 5.893"
Honda F20C - 625+ 6.023"
Mits 4G63 (1g) - 625+ 5.906"
Mits 4G63 (1g) - bROD 5.906"
Mits 4G63 (2g) - 625+ 5.906"
Mits 4G63 (2g) - bROD 5.906"
Dodge SRT-4 - 625+ 5.945"
Dodge SRT-4 - bROD 5.945"
Nissan SR20 - 625+ 5.366"
Nissan SR20 - bROD 5.366"
Nissan KA24 - 625+ 6.495"
Nissan KA24 - bROD 6.495"
Nissan VQ35 - Custom 5.560"
Nissan VQ35 - 625+ 5.675"
Nissan VQ35 - bROD 5.675"
Nissan RB26 - 625+ 4.783"
Nissan TB48 - Pro
6.436"
Nissan TB48 - Custom 6.535"
Toyota 2JZ - 625+
5.590"
Toyota 7M - 625+
5.980"
Toyota 7M - bROD
5.980"
BE BORE
BE WIDTH
PE BORE
PE WIDTH
1.890"
1.890"
1.890"
1.890"
1.890"
1.890"
2.008"
2.008"
2.008"
1.890"
1.890"
2.008"
1.890"
1.890"
2.008"
2.008"
1.890"
1.890"
1.890"
1.890"
2.086"
2.086"
2.008"
2.008"
2.086"
2.086"
2.165"
2.165"
2.165"
2.008"
2.362"
2.325"
2.166"
2.166"
2.166"
0.935"
0.935"
0.858"
0.858"
0.935"
0.935"
0.935"
0.935"
0.740"
0.935"
0.935"
0.740"
0.935"
0.935"
0.940"
0.940"
1.115"
1.115"
1.038"
1.038"
1.038"
1.038"
0.896"
0.896"
0.973"
0.973"
0.818"
0.818"
0.818"
0.858"
1.290"
0.991"
1.020"
0.977"
0.977"
0.827"
0.827"
0.827"
0.827"
0.827"
0.827"
0.866"
0.866"
0.866"
0.866"
0.866"
0.866"
0.866"
0.866"
0.905"
0.905"
0.827"
0.827"
0.866"
0.866"
0.866"
0.866"
0.866"
0.866"
0.827"
0.827"
0.866"
0.866"
0.866"
0.827"
0.905"
0.990"
0.866"
0.866"
0.866"
0.710"
0.710"
0.710"
0.710"
0.710"
0.710"
0.900"
0.900"
0.900"
0.900"
0.900"
0.900"
0.900"
0.900"
0.940"
0.940"
1.115"
1.115"
1.038"
1.038"
1.038"
1.038"
0.858"
0.858"
1.000"
1.000"
0.858"
0.858"
0.858"
0.858"
1.025"
0.991"
1.000"
1.010"
1.010"
*Indicates rod does not match OEM specifications and will not fit OEM crankshaft.
4340
STEEL CRANKSHAFTS
BC billet stroker crankshafts are made from only the highest grade, 4340
steel bar stock to guarantee the strongest part available at any price. CNC
machined on state-of-the-art mills and nitrided for added longevity, BC
billet crankshafts feature large radius journals for added strength at high
horsepower, ground to exacting tolerances for long lasting service.
CRANK #
ENGINE MAKE
BC5018*
BC5018LW*
BC5019*
BC5019LW*
BC5020*
BC5020LW*
BC5035
BC5039
BC5048
BC5049
BC5069
BC5105*
BC5109
BC5110
BC5209
BC5219
BC5225
BC5225U
BC5229
BC5229U
BC5239
BC5259
BC5309
BC5309LW
BC5409
BC5429
BC5609
BC5629
Honda B16A
Honda B16A - LightWeight (-7 lbs)
Honda B18A/B, B20B, B18C
Honda B18A/B, B20B, B18C - LightWeight (-7 lbs)
Honda B18A/B, B20B, B18C
Honda B18A/B, B20B, B18C - LightWeight (-7 lbs)
Honda H22/H22A (55mm main - 1997-2001)
Honda H22/H22A (50mm main - 1993-1996)
Honda/Acura K20A/K20Z (Custom Crank Pin)
Honda K24A1/K24A2 (Custom Crank Pin)
Honda F20C/F22C
Mitsubishi 4G63 (6 Bolt)
Mitsubishi 4G63/Evo (7 Bolt)
Mitsubishi 4G64 Block w/4G63 Head (7 Bolt)
Nissan SR20DE(T)
Nissan KA24DE - Fully Counterweighted
Nissan VQ35DE - Fully Balanced
Nissan VQ35DE - Unbalanced
Nissan VQ35DE - Fully Balanced
Nissan VQ35DE - Unbalanced
Nissan RB26/RB25
Nissan TB48 - Big Block Chevy Pin
Toyota 2JZGTE/2JZGE
Toyota 2JZGTE/2JZGE - Lightweight (-15 lbs)
Ford 4.6L
Ford 5.4L
Subaru EJ20
Subaru EJ25
*Indicates 4340 forging
STROKE
84.5mm
84.5mm
95mm
95mm
92mm
92mm
100mm
100mm
92mm
102mm
97mm
102mm
102mm
106mm
91mm
102mm
86.4mm
86.4mm
88mm
88mm
79mm
108mm
94mm
94mm
3.800"
4.415"
79mm
83mm
SEMI
& PRIVATE LABEL CAMS
BC Inc. can supply semi finished cam core suitable for final grinding or private
22
label, finished ground cams, CNC machined on state-of-the-art Schaudt grinders.
Private label requires minimum quantity of 50 pairs or 100 cams.
SHELF(continued)
SHELF
PISTONS
CP stocking pistons are made from premium 2618 aluminum forgings that
are application specific. CP pistons feature CNC craftsmanship, made to only
the highest tolerances, made using the highest quality materials. Each set
includes pistons, 5100 series alloy wrist pins (9310 pin upgrade available for
high HP use), ring pack with ductile iron plasma top rings, tapered second
rings, low tension oil rings and spiral locks. Most shelf units are in stock and
ready to ship.
PISTON #
ENGINE MAKE
CP7000
CP7001
CP7100
CP7101
CP7005
CP7006
CP7105
CP7106
CP7010
CP7011
CP7014
CP7012
CP7015
CP7016
CP7013
CP7110
CP7111
CP7113
CP7112
CP7115
CP7116
CP7114
CP7115X
CP7116X
CP7135
CP7136
CP7123X
CP7124X
CP7020
CP7021
CP7022
CP7017
CP7018
CP7019
CP7117
CP7118
CP7119
CP7120
CP7121
CP7122
Honda B16A
Honda B16A
Honda B16A
Honda B16A
Acura B18A/B
Acura B18A/B
Acura B18A/B
Acura B18A/B
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda/Acura B18C1
Honda B18C5
Honda B18C5
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
Honda/Acura B Series
BORE
COMPRESSION RATIO
81.0mm (STD)
81.5mm (+.020")
81.0mm (STD)
81.5mm (+.020")
81.0mm (STD)
81.5mm (+.020")
81.0mm (STD)
81.5mm (+.020")
81.0mm (STD)
81.5mm (+.020")
82.0mm (+.040")
83.0mm (+.080")
81.0mm (STD)
81.5mm (+.020")
83.0mm (+.080")
81.0mm (STD)
81.5mm (+.020")
82.0mm (+.040")
83.0mm (+.080")
81.0mm (STD)
81.5mm (+.020")
82.0mm (+.040")
81.0mm (STD)
81.5mm (+.020")
81.0mm (STD)
81.5mm (+.020")
85.0mm (+.040")
86.0mm (+.080")
84.0mm (STD)
84.5mm (+.020")
85.0mm (+.040")
84.0mm (STD)
84.5mm (+.020")
85.0mm (+.040")
84.0mm (STD)
84.5mm (+.020")
85.0mm (+.040")
84.0mm (STD)
84.5mm (+.020")
85.0mm (+.040")
9.0:1
9.0:1
10.5:1
10.5:1
9.0:1
9.0:1
10.5:1
10.5:1
9.0:1
9.0:1
9.0:1
9.0:1
9.8:1
9.8:1
9.8:1
11.0:1
11.0:1
11.0:1
11.0:1
12.5:1
12.5:1
12.5:1
12.5:1
12.5:1
11.5:1
11.5:1
+7.7cc
+7.7cc
9.0:1
9.0:1
9.0:1
9.7:1
9.7:1
9.7:1
11.5:1
11.5:1
11.5:1
12.5:1
12.5:1
12.5:1
23
PISTON #
ENGINE MAKE
CP7060
CP7061
CP7062
CP7040
CP70401
CP70402
CP70403
CP70404
CP7140
CP71401
CP71402
CP71403
CP71404
CP71405
CP7142X
CP71421X
CP71422X
CP71423X
CP71424X
CP71425X
CP7045
CP70451
CP70452
CP70453
CP7145
CP71451
CP71452
CP71453
CP71454
CP7147X
CP71471X
CP71472X
CP71473X
CP71474X
CP7030
CP7031
CP7034
CP7130
CP7131
CP7032
CP7500
CP7501
CP7200
CP7202
CP7201
CP7203
CP7205
CP7207
CP7206
CP7208
CP7210
CP7211
Honda F20C
87.0mm (STD)
Honda F20C
87.5mm (+.020")
Honda F20C
88.0mm (+.040")
Honda/Acura K20A/Z
86.0mm (STD)
Honda/Acura K20A/Z 86.5mm (+.020")
Honda/Acura K20A/Z 87.0mm (+.040")
Honda/Acura K20A/Z 88.0mm (+.080")
Honda/Acura K20A/Z 89.0mm (+.120")
Honda/Acura K20A/Z
86.0mm (STD)
Honda/Acura K20A/Z 86.5mm (+.020")
Honda/Acura K20A/Z 87.0mm (+.040")
Honda/Acura K20A/Z 88.0mm (+.080")
Honda/Acura K20A/Z 89.0mm (+.120")
Honda/Acura K20A/Z 90.0mm (+.160")
Honda/Acura K20A/Z
86.0mm (STD)
Honda/Acura K20A/Z 86.5mm (+.020")
Honda/Acura K20A/Z 87.0mm (+.040")
Honda/Acura K20A/Z 88.0mm (+.080")
Honda/Acura K20A/Z 89.0mm (+.120")
Honda/Acura K20A/Z 90.0mm (+.160")
Honda K24 w/K20A
87.0mm (STD)
Honda K24 w/K20A
87.5mm (+.020")
Honda K24 w/K20A
88.0mm (+.040")
Honda K24 w/K20A
89.0mm (+.080")
Honda K24 w/K20A
87.0mm (STD)
Honda K24 w/K20A
87.5mm (+.020")
Honda K24 w/K20A
88.0mm (+.040")
Honda K24 w/K20A
89.0mm (+.080")
Honda K24 w/K20A
90.0mm (+.120")
Honda K24 w/K20A
87.0mm (STD)
Honda K24 w/K20A
87.5mm (+.020")
Honda K24 w/K20A
88.0mm (+.040")
Honda K24 w/K20A
89.0mm (+.080")
Honda K24 w/K20A
90.0mm (+.120")
Honda H22
87.0mm (STD)
Honda H22
87.5mm (+.020")
Honda H22
88.0mm (+.040")
Honda H22
87.0mm (STD)
Honda H22
87.0mm (STD)
Honda H23
87.5mm (+.020")
Dodge SRT-4
87.5mm (STD)
Dodge SRT-4
87.5mm (+.020")
Mitsubishi 4G63 (1g) 85.5mm (+.020")
Mitsubishi 4G63 (1g) 86.0mm (+.040")
Mitsubishi 4G63 (2g) 85.5mm (+.020")
Mitsubishi 4G63 (2g) 86.0mm (+.040")
4G63(1g) -100mm stroke 85.5mm (+.020")
4G63(1g) -100mm stroke 86.0mm (+.040")
4G63(2g) -100mm stroke 85.5mm (+.020")
4G63(2g) -100mm stroke 86.0mm (+.040")
Mits 6G72 (3000GT)
91.8mm (+.030")
Mits 6G72 (3000GT)
91.8mm (+.030")
BORE
COMPRESSION RATIO
9.0:1
9.0:1
10.5:1
9.0:1
9.0:1
9.0:1
9.0:1
9.0:1
11.5:1
11.5:1
11.5:1
11.5:1
11.5:1
11.5:1
12.5:1
12.5:1
12.5:1
12.5:1
12.5:1
12.5:1
9.0:1
9.0:1
9.0:1
9.0:1
11.5:1
11.5:1
11.5:1
11.5:1
11.5:1
12.5:1
12.5:1
12.5:1
12.5:1
12.5:1
9.0:1
9.0:1
9.0:1
10.0:1
11.5:1
9.0:1
8.5:1
8.5:1
9.0:1
9.0:1
9.0:1
9.0:1
9.0:1
9.0:1
9.0:1
9.0:1
8.0:1
9.0:1
SHELF(continued)
PISTON #
ENGINE MAKE
CP7299
CP7300
CP7307
CP7308
CP7309
CP7310
CP7311
CP7320
CP7321
CP7324
CP7325
CP7326
CP7329
CP73241
CP7327
CP7328
CP73291
CP7330
CP7335
CP7336
CP7337
CP7338
CP73371
CP73381
CP7400
CP7410
CP7420
CP7421
CP7459
CP7460
CP7461
CP7449
CP7450
CP7451
CP7470
Nissan KA24DE
Nissan KA24DE
Nissan RB25DET
Nissan RB25DET
Nissan RB26DETT
Nissan RB26DETT
Nissan RB26DETT
Nissan SR20DE
Nissan SR20DE
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan SR20DET
Nissan VG30DE
Nissan VG30DETT
Nissan VG30DETT
Nissan VQ35DE
Nissan VQ35DE
Nissan VQ35DE
Nissan VQ35DE
Subaru EJ205 (WRX)
Subaru EJ25 (II)
Subaru EJ257 (STi)
Subaru EJ257 (STi)
Toyota 2JZGTE
Toyota 2JZGTE
Toyota 2JZGTE
Toyota 3SGTE
Toyota 3SGTE
Toyota 3SGTE/5SFE
Toyota 7MGTE
BRIAN CROWER, INC.
P.O. BOX 19066
SAN DIEGO CA 92159
P: 619-825-8719
F: 619-825-9675
info@briancrower.com
www.briancrower.com
BORE
COMPRESSION RATIO
89.0mm (STD)
89.5mm (+.020")
86.0mm (STD)
86.5mm (+.020")
86.0mm (STD)
86.5mm (+.020")
87.0mm (+.040")
86.5mm (+.020")
87.0mm (+.040")
86.0mm (STD)
86.5mm (+.020")
87.0mm (+.040")
90.0mm (+.157")
86.0mm (STD)
86.5mm (+.020")
87.0mm (+.040")
90.0mm (+.157")
87.5mm (+.020")
87.5mm (+.020")
88.0mm (+.040")
95.5mm (STD)
96.0mm (+.020")
95.5mm (STD)
96.0mm (+.020")
92.5mm (+.020")
100.0mm (+.020")
99.5mm (STD)
100mm (+.020")
86.0mm (STD)
86.5mm (+.020")
87.0mm (+.040")
86.0mm (STD)
86.5mm (+.020")
87.5mm (+.040")
84.0mm (+.040")
9.0:1
9.0:1
8.5:1
8.5:1
8.5:1
8.5:1
8.5:1
10.5:1
10.5:1
9.0:1
9.0:1
9.0:1
9.0:1
8.5:1
8.5:1
8.5:1
8.5:1
10.5:1
8.5:1
8.5:1
8.5:1
8.5:1
11.0:1
11.0:1
8.5:1
8.5:1
8.2:1
8.2:1
8.5:1
8.5:1
8.5:1
9.0:1
9.0:1
8.5:1
8.4:1
STROKER/CUSTOM
PISTONS
CP custom pistons are made to order with 2618 aluminum forgings that are
application specific. Choose any desired bore size and compression ratio,
as well as added features like 9310 alloy wrist pin upgrade (5100 series is
standard), anti-detonation grooves, lateral and/or vertical gas ports, and
chamfered pin boss. All customs include premium ring pack with ductile iron
plasma top rings, tapered second rings, low tension oil rings and spiral locks.
Custom pistons require 50% deposit prior to production.
24
PISTON #
ENGINE MAKE
BC7000
BC7001
BC7005
BC7006
BC7018
BC7029
BC7039
BC7048
BC7049
BC7069
BC7109
BC7110
BC7209
BC7219
BC7229
BC7239
BC7259
BC7309
BC7409
BC7429
BC7609
BC7629
Popular 4 Cyl Appl
Popular 4 Cyl w/9310 pins
Popular 6 Cyl Appl
Popular 6 Cyl w/9310 pins
Honda B16 Stroker
Honda B18/B20 Stroker
Honda H22 Stroker
Honda/Acura K20 Stroker
Honda/Acura K24 Stroker
Honda F20C/F22C Stroker
Mitsubishi 4G63 Stroker
Mitsubishi 4G64 Stroker
Nissan SR20DE Stroker
Nissan KA24DE Stroker
Nissan VQ35DE w/9310
Nissan RB26 w/9310 pins
Nissan TB48 w/9310 pins Toyota 2JZGTE Stroker w/9310
Ford 4.6L Stroker
Ford 5.4L Stroker
Subaru EJ205 Stroker
Subaru EJ257 Stroker
BORE
COMPRESSION RATIO
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify
Specify