CATALOGUE MEDIUM TO HEAVY DUTY IDLER

Transcription

CATALOGUE
PULLE
MEDIUM TO
Sandvik Materials Handling
HEAVY DUT
Y IDLER
YS, ID
LERS
AND M
AT E R
IALS
HAND
LING
SYSTE
MS
INDEX
3 ROLL INLINE CARRY & IMPACT
PAGE 3
3 ROLL INLINE PLAIN P/A TRAINER
PAGE 5
SINGLE ROLL FLAT CARRY & IMPACT
PAGE 7
SINGLE ROLL PLAIN & DISC FLAT RETURN
PAGE 9
SINGLE ROLL PLAIN P/A RETURN TRAINER
PAGE 11
2 ROLL PLAIN & DISC VEE RETURN
PAGE 13
2 ROLL PLAIN SUSPENDED VEE RETURN
PAGE 15
3 ROLL SUSPENDED CARRY & IMPACT
PAGE 17
ACCESSORIES
PAGE 19
WEIGH IDLERS
PAGE 22
ORDERING INFORMATION
PAGE 23
SANDVIK IDLER SELECTION DATA SHEET
PAGE 24
IMPORTANT NOTE FOR ALL DESIGNERS AND DRAFTSPERSONS
The information contained in this catalogue is dimensional only
To ensure any product selection performed provides the end users with the
lowest total cost of ownership we have provided at page 24 of this catalogue
a design submission sheet. If you require Sandvik to design/select equipment
please complete the submission sheet and forward to your nearest Sandvik office.
This selection process may result in some dimensions of the selected equipment
differing from those stated in this catalogue.
In the interest of product development, Sandvik reserves the right to change critical
data at any time without prior notice. Dimensions shown are nominal only. Certified
drawings are available on request.
THE BENEFITS OF SANDVIK CONVEYOR IDLERS
It was in 1958 that Sandvik Engineers saw the need to improve the design of materials
handling equipment. Systems needed to be capable of handling larger tonnages at higher
speeds for mining and industry to achieve economies in operation. The challenge was met
by a design for conveyor idlers which incorporated the many features found in Sandvik
idlers ever since. The designs and features were unique at that time and many remain
so even today.
Sandvik have continued research work with new technologies and materials to develop
the current range of Sandvik idlers which have the following features.
Idlers
Sandvik idler philosophy seeks to achieve a balance of relatively conservative designs,
functionality, practicality, quality and economy. The application of this concept
strengthened Sandvik position in the industry as a market leader and diversified the
equipment range. The success of the Product has resulted in Sandvik idlers being the
industry standard for many years.
Rollers
Sandvik rollers are robust assemblies of carefully fabricated shells and precision bearings
fitted to high tolerance shafts. The Sandvik Standard roller range matches the shell, shaft
and bearings into a sound unit for a variety of applications.
Sandvik standard rolls are designed on sound engineering principles with particular
attention to achieving:
•
•
•
•
•
•
better balance
increased bearing life
less shell wear
reduced power consumption
lower vibration levels
and quieter running
Bearings
All conveyor idler rolls require the bearing and shaft assembly to operate under
deflection conditions. The shaft is only supported at each end and therefore must accept
the load from the shell to the bearings at each end. This results in shaft bending and
angular deflection at the bearings.
Sandvik use Single Row Deep Groove Precision Ball Bearings because they:
• Satisfy deflection criteria without unreasonable increases in shaft diameters
between the bearings.
• Will accept the axial thrust component of the load generated by conveyor belt
movement across the roller face or where rollers are inclined in the wing position.
• Permit practical shaft diameters which satisfy bearing deflection criteria and allow
manufacturers to use normal dynamic capacity ratings to assess B10 bearing life.
• Retain grease at the bearing faces thus permitting an extended period of operation
without having to relubricate the roll.
• If the angular deflection limits are exceeded, the effect on ball bearings is less
critical than for other bearing types.
Lubrication
Sandvik rolls are Factory greased to ensure correct quantity. The grease used is specially
formulated for its lubricating and sealing properties.
A range of special greases are also available for extreme hot or cold climatic conditions.
Sandvik Breather
Sandvik Materials Handling developed the unique breather system which still features in
our heavy duty range of conveyor rolls. Each roller has a breather device through which
cyclic induction and expulsion of air caused by temperature change can take place, thus
removing the opportunity for contaminants to enter the grease reservoir and bearing
assembly.
Drag
Roll drag is an important consideration as it can increase power consumption, starting
tensions and in some cases, can affect the life of the roll shell. The latter being due to belt
drag over the top of the roll thereby causing flat spots on the shell face. Sandvik roller
designs optimize seal efficiency, correct bearing fits and lubrication to maintain drag at
acceptable levels – without compromising roller life or capacity.
Total Indicator Runout (T.I.R.)
Shell to End Cap Weld
Precision drawn end caps are welded to the tube with purpose-built machines. The
shell tube is clamped at the ends during welding to maintain concentricity and minimize
distortion. The result is minimum run-out, high balance quality rolls are produced.
Tube
The roller shell tube is produced to Sandvik’s own specification. The tube is carefully
rolled and electric resistance welded and drawn to control concentricity and that the weld
is scarfed inside and out.
Sealing
All Sandvik rollers incorporate multi-labyrinth sealing to protect the bearings.
The grease filled multi-labyrinth seal retards the ingress of contaminants to the bearing.
In addition to the labyrinth seal, the outer seal has minimal clearance where the seal
meets the shaft. This seal is further protected by an external weather seal. Internal seals
to exclude foreign matter can enter the bearing cavity from the rear.
Sandvik seal components are manufactured from precision rolled steel coil. To ensure
long life and resistance to corrosion all Sandvik rolls are assembled with galvanised outer
seals.
The Sandvik multi-labyrinth seal has been continuously refined to become the most
effective seal in the business.
PAGE 1
Excessive T.I.R. causes noisy belt flap, structural vibrations, roll imbalance and
reduced bearing life. Sandvik roll shells are checked regularly during manufacture to
ensure they comply with quality standards established by Sandvik Materials Handling.
The high level of balance achieved by Sandvik begins with the quality of the electric
resistance welded high speed conveyor tube used in all Sandvik rolls.
Balance
Destructive vibration can arise from imbalance of rollers producing fluctuating loads on
the idler and supporting structure.
Excessive imbalance can cause hammer on the bearings and loosening of bearing and
seal fits. Sandvik rollers to a range of balance requirements from commercial quality
through to dynamically balanced for demanding high speed – low noise applications.
Every roll is test run after final assembly at an equivalent belt speed of nine (9) metres
per second.
Shafts
A common cause of bearing failure is excessive shaft deflection. Sandvik roller designs
limit the extent of deflection to within the allowable limits of the bearing. Shaft diameters
are selected for the idler assembly under full load operating conditions.
Finish
Sandvik standard paint finishes include solvent washed and spray painted alkyd yellow
enamel on rolls; frames and structural members are painted with dipping enamel or
galvanized as standard.
Need special Idlers?
The variety of idler types is seemingly endless. The basic frame mounted trough, impact
and return idlers have multitudes of configurations, combinations and variants such as
suspended (catenary), retractable, jack down, fold down.
As maintenance and operation issues are identified, Sandvik has developed new solutions
and designs to make light work of trouble spots.
Alternative Materials
Sandvik rolls are available in a variety of materials to suit particularly arduous applications,
materials such as Aluminium, and high chromium alloys are available.
Alloy rollers are ideally suited for use in salt applications or other highly corrosive
materials handling systems. As well has having reduced dead weight, light weight
Aluminium rolls offer less resistance to belt acceleration and provides less resistance
on the conveyor normal running state, as a result of reduced mass of rotating parts.
These standard aluminium rolls are fitted with special seals which are corrosion resistant.
Use of these rolls will significantly reduce supporting structures, particularly on mobile
stacking and loading installations and are easier to handle manually.
Low Noise
Noise generation is becoming an increasingly important consideration as industry
becomes more environmentally conscious. Sandvik have developed a range of alternative
rolls to address this issue. Each application will be different and may require different roll
solutions.
Base frame cross members are designed for optimum strength weight ratio whilst
providing adequate support for the rolls under load conditions.
Self Cleaning
The inverted angle base frame has a self cleaning action by virtue of its sloping upper
surfaces. This feature eliminates the possibility of rolls jamming due to material build up.
Welding
Jig welding of the base frames ensures slotted mounting brackets are accurately aligned.
This has the effect of reducing installation costs and belt wear. All roll supports are
welded to provide smooth weld surfaces for the application of protective coatings. Welds
are cleaned prior to surface treatment.
Blasting
All frames and brackets are abrasive blasted prior to surface treatment. This process
removes mill scale and any oil and grease to ensure good coverage and adhesion of the
surface coatings.
Inspection
MANUFACTURERS OF HIGH QUALITY CONVEYOR EQUIPMENT
All frames are inspected prior to commencing the welding run to confirm accuracy of
major dimensions. Selected frames are removed from the productions run at intervals and
subjected to full dimension checks and weld quality inspection.
Frame outer slopers are designed to prevent
material build up around the shell end
thereby avoiding premature shell wear due
to roll jamming.
coatings. Welds are cleaned prior to surface
treatment.
SANDVIK IDLER STANDARD DATA Blasting
Base frame cross members are designed for
optimum strength weight ratio whilst
All frames and brackets are shot blasted
The inverted angle base frame has a self
Shot blasting is to AS 1627, Part 4-1989,
class 2.
treatment.
process
Sandvik
idlers
are manufactured
to to
thesurface
standards
listedThis
below.
These
providing
adequate
support for theand
rolls suppliedprior
removes mill scale and any oil and grease to
under load
conditions.
standards
have
been developed over 40 years ensure
of research
and experience
in conveyor
good coverage
and adhesion
of the
design to satisfy customer requirements. Quality
controls
and systems are in place in
surface
coatings.
Self Cleaning
accordance
with AS/NZS I.S.O. 9001 - 2000.
cleaning
action by virtue
of its sloping upper
Idler
Mounting
Centres
This feature eliminates the
surfaces.
Inspection
rolls jamming
due1535
to material
To possibility
generallyofconform
to ISO
and accepted Australian practice, the mounting hone
build up.
All on:
frames are inspected prior to
centres listed in the dimensional tables are based
Welding
commencing the welding run to confirm
accuracy of major dimensions. Selected
BELT WIDTH + 250mm for belts up to and including
mm.
frames1200
are removed
from the productions
BELT
forframes
belts over
1200 mm run
up to
including
mm. to full
Jig WIDTH
welding +of300mm
the base
ensures
at and
intervals
and 1500
subjected
slotted
mounting
brackets
dimension checks and weld quality
BELT
WIDTH
+ 400mm
for are
beltsaccurately
1600 mm and over.
aligned. This has the effect of reducing
installation costs and belt wear. All roll
inspection.
Mounting
foot
slots
are smooth
sizedweld
throughout the range to suit M12 bolts.
supports are
welded
to provide
for thethe
application
of protective
Wesurfaces
recommend
use of M12
large flat washers for attachment to the structure.
A wide variety of alternate finishes are available. The most common alternative is hot dip
galvanising, which can be applied to frames and rollers.
IMPORTANT POINTS TO CONSIDER WHEN
SELECTING IDLER ROLLERS
• Shaft diameters must be large enough to limit angular deflection at bearings to
within bearing supplier recommendations.
• Design of seals must prevent ingress of dirt and water vapour to the bearing cavity.
• Utilise rollers with the minimum external seal gap.
• Choose rollers with large grease cavity.
• Select the roller with a low mass of rotating parts.
• Choose rollers where shell ends are integral with the shell and are pocket-free.
• Maximum performance is achieved where the roller load capacities of shells, shell
ends, and bearings are balanced.
• Ensure minimum run-out to prevent vibration transmission to belt.
• Provided for vibration-free running and future capacity increases by selecting high
balance rollers.
• Belt protection is enhanced by selecting rollers with well-rounded corners.
• All components of the idler are expected to run for millions of revolutions and
should be precision made to closest possible tolerances.
• Utilise precision ball bearings to retain grease and give long maintenance free life.
• Rollers requiring frequent regreasing through grease nipples are subject to ingress
of dirt and water to the bearing.
• Rollers with internal rubbing seals such as sealed-for-life bearings with felt or
neoprene rubbing seals are subject to wear and eventual bearing failure.
• Rollers should be tightly fitted to a rigid base designed to shed dirt by minimising
material buildup.
• Rollers operating in the open or subject to hosing down during inhouse house
keeping should be fitted with weather seals.
• Select rolls in which labyrinth sealing has a minimum grease shear area.
Manufacturing Tolerance
Nominal O.D of Roll – Steel Shell+/- 0.3 mm
Rubber Disc
+/- 0.8 mm
Thickness of Steel shell
+/- 0.5 mm
Roll face length
+/- 1.5 mm
Centre roll height above base line +/- 2.0 mm
Transverse hole centers
+/- 2.0 mm
Longitudinal hole centers
+/- 2.0 mm
Return bracket drop height
+/- 2.0 mm
Trough angle
+/- 1∞
Roll corner radius
3.0 mm minimum
Corner weld penetration 80% Min
Total Indicator Reading (TIR) Runout max
Prok Standard Roller
Up to 750 mm long
Above 750 mm long
Out of Balance
Standard Rolls
Weigh Rolls
2-7
0.65 mm
0.000867 x length
0.056 Nm
Class G16 of
AS3709
Low Noise rollers are available on request.
Features of the Sandvik Base Frame
Idler bases are designed to provide a minimum gap between rollers, and give added
Protection to the conveyor belt. Frame outer slopers are designed to prevent material
build up around the shell end thereby avoiding premature shell wear due to roll
jamming.
PAGE 2
3 ROLL INLINE CARRY & IMPACT
SERIES 25
CODE NUMBER
ROLL DIAMETER 127
A
B
20 °
30 °
BEARING SIZE 6305
35 °
45 °
E
C
D
C
D
C
D
C
D
862
347
808
368
776
403
707
818
422
746
F
TOTAL
26.0
SERIES 45
CODE NUMBER
ROLL DIAMETER 152
A
B
20 °
30 °
BEARING SIZE 6307
35 °
45 °
E
F
MASS Kgs.
432 45 °716
E
140
F
230
MASS Kgs.
17.4
41.3
C
448
D
750
150
237
R.P
18.0
TOTAL
43.4
780
920
432
476
716
844
140
150
230
237
17.4
19.8
41.3
47.2
412
459
817
991
448
504
750
909
150
165
237
246
18.0
21.0
43.4
53.0
960
1102
434
473
920
1057
476
522
844
970
150
165
237
246
19.8
22.2
47.2
55.3
433
483
1034
1247
459
514
991
1197
504
570
909
1098
165
180
246
257
21.0
24.3
53.0
62.8
1179
1481
446
509
1102
1389
473
544
1057
1334
522
607
970
1223
165
180
246
257
22.2
26.7
55.3
68.5
415
443
1332
1499
483
520
1247
1406
514
556
1197
1350
570
619
1098
1238
180
200
257
265
24.3
27.0
62.8
76.9
1650
1800
433
459
1481
1634
509
544
1389
1534
544
582
1334
1474
607
653
1223
1351
180
200
257
265
26.7
29.1
68.5
81.7
500
567
1700
2000
443
486
1499
1692
520
574
1406
1589
556
614
1350
1527
619
687
1238
1399
200
240
265
285
27.0
30.0
76.9
94.0
45113-1500-00
45113-1800-00
547
631
1800
2200
459
508
1634
1876
544
606
1534
1764
582
651
1474
1696
653
732
1351
1554
200
240
265
285
29.1
32.7
81.7
105.1
75.4
45113-1600-00
45113-2000-00
567
706
2000
2400
486
553
1692
2092
574
662
1589
1969
614
713
1527
1893
687
804
1399
1735
240
280
285
304
30.0
36.0
94.0
134.6
82.0
45113-1800-00
45113-2200-00
631
785
2200
2600
508
580
1876
2319
606
702
1764
2184
651
758
1696
2102
732
860
1554
1926
240
280
285
304
32.7
39.6
105.1
145.9
45113-2000-00
706
2400
553
Note: “RP” is an abbreviation for Rotating Parts.
2092
662
1969
713
1893
804
1735
“00” – Insert required Troughing Angle: 20˚, 30˚, 35˚ or 45˚.
280
304
36.0
134.6
45113-2200-00
2319
280
304
39.6
145.9
280
1000
305
25113-0800-00
296
1050
317
CODE NUMBER
25113-0900-00
A
333
B
1150
°
330 20 1015
381 30 °953
405 35 °915
448 45 °835
E
150
F
212
MASS Kgs.
11.7
30.1
CODE NUMBER
45113-0750-00
A
284
B
1000
334 20 °877
377 30 °816
397 35 °780
25113-1000-00
360
1250
C
348
D
1092
C
403
D
1026
C
430
D
987
C
476
D
900
165
221
R.P
12.6
TOTAL
34.9
45113-0800-00
298
1050
C
346
D
917
C
391
D
854
C
412
D
817
25113-0750-00
25113-1050-00
280
385
1000
1300
305
357
862
1164
347
416
808
1095
368
444
776
1053
403
494
707
960
140
165
205
221
10.5
13.2
26.0
37.8
45113-0750-00
45113-0900-00
284
337
1000
1150
334
359
877
1029
377
411
816
960
397
434
25113-0800-00
25113-1200-00
296
438
1050
1450
317
386
908
1317
362
453
852
1240
384
485
818
1192
422
542
746
1088
150
180
212
232
10.8
14.7
27.8
43.7
45113-0800-00
45113-1000-00
298
364
1050
1250
346
378
917
1107
391
433
854
1034
25113-0900-00
25113-1350-00
333
490
1150
1650
330
404
1015
1467
381
479
953
1382
405
515
915
1330
448
579
835
1214
150
180
212
232
11.7
16.2
30.1
48.1
45113-0900-00
45113-1050-00
337
389
1150
1300
359
386
1029
1179
411
446
25113-1000-00
25113-1400-00
360
496
1250
1700
348
414
1092
1484
403
490
1026
1398
430
527
987
1345
476
591
900
1228
165
200
221
240
12.6
16.2
34.9
56.1
45113-1000-00
45113-1200-00
364
442
1250
1450
378
415
1107
1332
25113-1050-00
25113-1500-00
385
543
1300
1800
357
430
1164
1619
416
514
1095
1526
444
554
1053
1469
494
624
960
1342
165
200
221
240
13.2
17.7
37.8
61.8
45113-1050-00
45113-1350-00
389
494
1300
1650
386
433
25113-1200-00
25113-1600-00
438
563
1450
2000
386
457
1317
1677
453
544
1240
1581
485
585
1192
1522
542
658
1088
1390
180
240
232
260
14.7
18.0
43.7
75.4
45113-1200-00
45113-1400-00
442
500
1450
1700
25113-1350-00
25113-1800-00
490
627
1650
2200
404
479
1467
1861
479
576
1382
1756
515
622
1330
1691
579
704
1214
1545
180
240
232
260
16.2
19.8
48.1
82.0
45113-1350-00
45113-1500-00
494
547
25113-1400-00
496
1700
414
25113-1500-00
543
1800
430
1484
490
1398
527
1345
591
1228
1619
514
1526
554
1469
624
1342
200
240
16.2
56.1
45113-1400-00
45113-1600-00
200
240
17.7
61.8
25113-1600-00
563
2000
457
1677
544
1581
585
1522
658
1390
240
260
18.0
25113-1800-00
627
2200
479
1861
576
1756
622
1691
704
1545
240
260
19.8
Note:
ROLL
908 DIAMETER
362
852 127
384
“RP” is an abbreviation for Rotating Parts.
SERIES 30
CODE NUMBER
205
10.5
25113-0750-00
SERIES 25
140
MASS Kgs.
R.P
SERIES 45
BEARING
150
212 SIZE
10.8 6305
27.8
ROLL DIAMETER 152
35 °
2102
C
D
C
D
C
D
C
D
856
359
798
379
764
413
691
30113-0800-00
299
1050
330
806
431
730
CODE NUMBER
30113-0900-00
A
336
B
1150
°
342 20 1009
393 30 °943
416 35 °904
458 45 °819
E
150
F
225
MASS Kgs.
18.9
37.3
CODE NUMBER
50113-0750-00
A
284
B
1000
346 20 °868
389 30 °803
407 35 °765
30113-1000-00
363
1250
C
361
D
1087
C
415
D
1017
C
441
D
975
C
486
D
885
165
234
R.P
20.1
TOTAL
43.9
50113-0800-00
298
1050
C
358
D
908
C
403
D
841
C
422
D
802
30113-0750-00
30113-1050-00
283
388
1000
1300
317
369
856
1159
359
428
798
1085
379
455
764
1041
413
503
691
945
140
165
218
234
16.8
21.3
32.3
45.9
50113-0750-00
50113-0900-00
284
337
1000
1150
346
372
868
1020
389
422
803
947
407
445
30113-0800-00
30113-1200-00
299
441
1050
1450
330
398
902
1311
374
465
842
1230
395
497
806
1181
431
552
730
1073
150
180
225
245
17.4
23.7
34.4
52.7
50113-0800-00
50113-1000-00
298
364
1050
1250
358
390
908
1098
403
445
841
1021
30113-0900-00
30113-1350-00
336
493
1150
1650
342
416
1009
1461
393
491
943
1372
416
526
904
1318
458
589
819
1198
150
180
225
245
18.9
25.8
37.3
57.7
50113-0900-00
50113-1050-00
337
389
1150
1300
372
398
1020
1170
422
457
30113-1000-00
30113-1400-00
363
499
1250
1700
361
426
1087
1478
415
502
1017
1388
441
538
975
1334
486
601
885
1213
165
200
234
253
20.1
26.1
43.9
65.7
50113-1000-00
50113-1200-00
364
442
1250
1450
390
427
1098
1323
30113-1050-00
30113-1500-00
388
546
1300
1800
369
442
1159
1614
428
526
1085
1516
455
565
1041
1458
503
634
945
1326
165
200
234
253
21.3
28.2
45.9
72.3
50113-1050-00
50113-1350-00
389
494
1300
1650
398
445
30113-1200-00
30113-1600-00
441
566
1450
2000
398
469
1311
1671
465
556
1230
1571
497
596
1181
1510
552
668
1073
1375
180
240
245
273
23.7
29.1
52.7
86.2
50113-1200-00
50113-1400-00
442
500
1450
1700
30113-1350-00
30113-1800-00
493
630
1650
2200
416
491
1318
1679
589
714
1198
1529
50113-1350-00
50113-1500-00
494
547
50113-1400-00
50113-1600-00
50113-1500-00
50113-1800-00
ROLL DIAMETER 152
35113-0750-00
30113-1600-00
CODE NUMBER
286
566
A
1000
2000
B
335
469 20 1671
°879
378
817
556 30 °1571
397
782
596 35 °1510
432
718
668 45 °1375
35113-0800-00
30113-1800-00
300
630
1050
2200
346
491
C
392
588
C
412
633
C
449
714
C
218
758
317
SERIES 35
140
MASS Kgs.
2184
1000
CODE NUMBER
A
B
°
30113-1400-00
499
1700
426 20 1478
502 30 °1388
538 35 °1334
601 45 °1213
Note: “RP” is an abbreviation for Rotating Parts. “00” – Insert required Troughing Angle: 20˚, 30˚, 35˚ or 45˚.
C
D
C
D
C
D
C
D
30113-1500-00
546
1800
442
1614
526
1516
565
1458
634
1326
F
702
283
1461DIAMETER
491
1372 152
526
ROLL
1856
588
1746
633
E
580
30113-0750-00
ROLL
902 DIAMETER
374
842 152
395
45 °
2600
B
SERIES 35
30 °
785
D
A
SERIES 30
20 °
BEARING SIZE 6305
C
D
C
ROLLD DIAMETER
152
C
Note:
R.P
TOTAL
16.8
32.3
SERIES 50
CODE NUMBER
SERIES 50
BEARING
150
225 SIZE
17.4 6305
34.4
180
245 SIZE
25.8 6306
57.7
BEARING
240
273
31.8
94.0
E
200
F
253
MASS Kgs.
26.1
65.7
R.P
TOTAL
200
253 SIZE
28.2 6306
72.3
BEARING
C
860
D
1926
ROLL DIAMETER 178
A
B
20 °
30 °
F
MASS Kgs.
441 45 °698
E
140
F
243
MASS Kgs.
30.3
54.2
C
458
D
732
150
250
R.P
31.5
TOTAL
56.9
765
905
441
485
698
826
140
150
243
250
30.3
34.2
54.2
61.9
422
469
802
976
458
513
732
891
150
165
250
259
31.5
36.3
56.9
68.3
947
1089
445
484
905
1042
485
531
826
951
150
165
250
259
34.2
38.4
61.9
71.5
445
495
1021
1234
469
525
976
1182
513
579
891
1079
165
180
259
270
36.3
42.3
68.3
80.5
1170
1472
457
521
1089
1376
484
555
1042
1319
531
616
951
1205
165
180
259
270
38.4
46.2
71.5
88.3
427
455
1323
1490
495
532
1234
1393
525
566
1182
1335
579
628
1079
1219
180
200
270
278
42.3
46.8
80.5
96.7
1650
1800
445
471
1472
1625
521
555
1376
1521
555
593
1319
1459
616
662
1205
1333
180
200
270
278
46.2
50.4
88.3
103.0
500
567
1700
2000
455
498
1490
1683
532
585
1393
1576
566
625
1335
1512
628
696
1219
1381
200
240
278
298
46.8
51.9
96.7
115.9
547
631
1800
2200
471
520
1625
1867
555
617
1521
1751
593
661
1459
1681
662
741
1333
1535
200
240
278
298
50.4
56.7
103.0
129.4
1683
2083
585
674
1576
1956
625
723
1512
1879
696
813
1381
1717
240
280
298
317
51.9
62.7
115.9
161.0
1681
2087
741
869
1535
1907
E
280
F
317
MASS Kgs.
62.7
161.0
C
45 °
BEARING SIZE 6307
E
C
D
C
ROLLD DIAMETER
178
35 °
R.P 6307
TOTAL
BEARING SIZE
D
C
D
R.P 6307
TOTAL
BEARING SIZE
140
240
E
230
273
F
17.1
38.3
29.1
86.2
MASS Kgs.
50113-1600-00
50113-2000-00
567
706
2000
2400
498
565
751
1529
D
150
240
237
273
17.7
31.8
R.P
40.4
94.0
TOTAL
50113-1800-00
50113-2200-00
631
785
2200
2600
520
592
35113-0900-00
1150
35113-0750-00
286
1000 Pa360
335
Note:
“RP” is an abbreviat339
ion for Rotating
rts.
1031
411
962
435
922
477
879– Insert
378required
817Troughing
397 Angle:
78220˚, 30˚,
43235˚ or845
718
“00”
45˚.
150
140
237
230
19.5
17.1
43.6
38.3
35113-1000-00
35113-0800-00
366
300
1250
1050
378
346
1109
919
434
392
1036
856
459
412
993
819
505
449
911
751
165
150
246
237
20.7
17.7
49.1
40.4
CODE NUMBER
A
B
°
50113-2000-00
706
2400
565 20 2083
674 30 °1956
723 35 °1879
813 45 °1717
C
D
C
D
C
D
C
D
50113-2200-00
785
2600
592
2310
713
2171
769
2087
869
1907
35113-1050-00
35113-0900-00
391
339
1300
1150
386
360
1181
1031
446
411
1104
962
473
435
1059
922
522
477
971
845
165
150
246
237
21.9
19.5
51.1
43.6
54113-0750-00
286
1000
335
378 30 °817
397 35 °782
432
718
CODE NUMBER
B
°879– Insert
Note:
“RP” is an abbreviatioAn for Rotating
Parts. 20“00”
required Troughing Angle:
20˚, 30˚, 35˚45or° 45˚.
140
E
230
F
18.3
44.0
MASS Kgs.
35113-1200-00
35113-1000-00
444
366
1450
1250
416
378
1333
1109
484
434
1249
1036
515
459
1199
993
571
505
1099
911
180
165
257
246
24.3
20.7
58.3
49.1
54113-0800-00
300
1050
346
C
919
D
392
C
856
D
412
C
819
D
449
C
751
D
150
237
18.9
R.P
46.4
TOTAL
35113-1350-00
35113-1050-00
496
391
1650
1300
433
386
1483
1181
510
446
1391
1104
545
473
1336
1059
608
522
1225
971
180
165
257
246
26.4
21.9
63.7
51.1
54113-0900-00
54113-0750-00
339
286
1150
1000
360
335
1031
879
411
378
962
817
435
397
922
782
477
432
845
718
150
140
237
230
20.7
18.3
50.2
44.0
35113-1400-00
35113-1200-00
502
444
1700
1450
443
416
1500
1333
521
484
1407
1249
556
515
1352
1199
620
571
1239
1099
200
180
265
257
26.7
24.3
71.8
58.3
54113-1000-00
54113-0800-00
366
300
1250
1050
378
346
1109
919
434
392
1036
856
459
412
993
819
505
449
911
751
165
150
246
237
21.9
18.9
56.0
46.4
35113-1500-00
35113-1350-00
549
496
1800
1650
459
433
1636
1483
544
510
1536
1391
583
545
1476
1336
653
608
1352
1225
200
180
265
257
28.8
26.4
78.7
63.7
54113-1050-00
54113-0900-00
391
339
1300
1150
386
360
1181
1031
446
411
1104
962
473
435
1059
922
522
477
971
845
165
150
246
237
22.8
20.7
58.3
50.2
35113-1600-00
35113-1400-00
569
502
2000
1700
486
443
1693
1500
574
521
1590
1407
615
556
1528
1352
687
620
1401
1239
240
200
285
265
29.7
26.7
90.7
71.8
54113-1200-00
54113-1000-00
444
366
1450
1250
416
378
1333
1109
484
434
1249
1036
515
459
1199
993
571
505
1099
911
180
165
257
246
25.2
21.9
66.1
56.0
35113-1800-00
35113-1500-00
633
549
2200
1800
508
459
1878
1636
606
544
1765
1536
651
583
1697
1476
733
653
1555
1352
240
200
285
265
32.4
28.8
101.8
78.7
54113-1350-00
54113-1050-00
496
391
1650
1300
433
386
1483
1181
510
446
1391
1104
545
473
1336
1059
608
522
1225
971
180
165
257
246
27.6
22.8
72.1
58.3
35113-2000-00
35113-1600-00
708
569
2400
2000
553
486
2094
1693
663
574
1970
1590
713
615
1895
1528
805
687
1736
1401
280
240
304
285
35.7
29.7
130.7
90.7
54113-1400-00
54113-1200-00
502
444
1700
1450
443
416
1500
1333
521
484
1407
1249
556
515
1352
1199
620
571
1239
1099
200
180
265
257
27.6
25.2
80.0
66.1
35113-2200-00
35113-1800-00
787
633
2600
2200
580
508
2321
1878
702
606
2186
1765
759
651
2103
1697
861
733
1927
1555
280
240
304
285
39.0
32.4
145.3
101.8
54113-1500-00
54113-1350-00
549
496
1800
1650
459
433
1636
1483
544
510
1536
1391
583
545
1476
1336
653
608
1352
1225
200
180
265
257
29.7
27.6
85.6
72.1
35113-2000-00
2400 Part
553
Note:
“RP” is an abbreviati708
on for Rotating
s.
2094– Insert
663required
1970
713 Angle:
1895
80535˚ or1736
“00”
Troughing
20˚, 30˚,
45˚.
280
304
35.7
130.7
54113-1600-00
54113-1400-00
569
502
2000
1700
486
443
1693
1500
574
521
1590
1407
615
556
1528
1352
687
620
1401
1239
240
200
285
265
30.6
27.6
97.9
80.0
35113-2200-00
2321
280
304
39.0
145.3
54113-1800-00
54113-1500-00
633
549
2200
1800
508
459
1877
1636
606
544
1765
1536
651
583
1697
1476
733
653
1555
1352
240
200
285
265
33.6
29.7
109.3
85.6
54113-2000-00
54113-1600-00
708
569
2400
2000
553
486
2094
1693
663
574
1970
1590
713
615
1895
1528
805
687
1736
1401
280
240
304
285
36.9
30.6
139.1
97.9
54113-2200-00
54113-1800-00
787
633
2600
2200
580
508
2321
1877
702
606
2186
1765
759
651
2103
1697
860
733
1927
1555
280
240
304
285
40.2
33.6
150.7
109.3
Note:
on for Rotating
s.
54113-2000-00
2400 Part
553
“00”
Troughing
20˚, 30˚,
45˚.
2094– Insert
663required
1970
713 Angle:
1895
80535˚ or1736
280
304
36.9
139.1
54113-2200-00
2321
280
304
40.2
150.7
Note:
787
2600
580
SERIES 40
CODE NUMBER
SERIES 40
919
1856
D
702
856
1746
D
2186
759
819
1679
D
2103
861
1927
ROLL DIAMETER 178
A
B
20 °
30 °
35 °
C
D
C
ROLLD DIAMETER
178
C
40113-0750-00
CODE NUMBER
286
A
1000
B
347 20 °870
389 30 °804
40113-0800-00
300
1050
359
C
910
D
403
C
40113-0900-00
40113-0750-00
339
286
1150
1000
372
347
1022
870
425
389
40113-1000-00
40113-0800-00
366
300
1250
1050
390
359
1100
910
40113-1050-00
40113-0900-00
391
339
1300
1150
399
372
40113-1200-00
40113-1000-00
444
366
1450
1250
428
390
40113-1350-00
40113-1050-00
496
391
1650
1300
40113-1400-00
40113-1200-00
502
444
40113-1500-00
40113-1350-00
C
E
D
F
MASS Kgs.
R.P
TOTAL
BEARING SIZE
6306
408 35 °767
441 45 °699
843
D
423
C
804
D
458
C
949
804
445
408
907
767
486
441
445
403
1023
843
470
423
978
804
514
458
1172
1022
458
425
1091
949
484
445
1044
907
1325
1100
495
445
1236
1023
525
470
1184
978
446
399
1474
1172
521
458
1378
1091
555
484
1321
1044
617
532
1700
1450
456
428
1492
1325
532
495
1394
1236
567
525
1337
1184
THREE
PLAIN
1206
180
270
31.5
953 ROLL
165
259
26.1
TROUGH
629
1221
200
278
31.8
580OFFSET
1081
180
270
28.8
549
496
1800
1650
472
446
1627
1474
556
521
1523
1378
594
555
1461
1321
662
617
1334
1206
200
180
278
270
34.2
31.5
40113-1600-00
40113-1400-00
569
502
2000
1700
499
456
1685
1492
586
532
1577
1394
625
567
1513
1337
697
629
1382
1221
240
200
298
278
40113-1800-00
40113-1500-00
633
549
2200
1800
520
472
1869
1627
618
556
1752
1523
662
594
1682
1461
742
662
1537
1334
240
200
298
278
40113-2000-00
40113-1600-00
708
569
2400
2000
565
499
2085
1685
674
586
1957
1577
724
625
1880
1513
814
697
1718
1382
280
240
40113-2200-00
40113-1800-00
787
633
2600
2200
592
520
2312
1869
714
618
2173
1752
769
662
2089
1682
870
742
1909
1537
280
240
Note:
2173
769
2089
2186
759
2103
860
1927
250
150
140
250
243
23.4
20.7
47.5
41.6
CODE NUMBER
892
733
165
150
259
250
24.9
21.3
53.0
44.0
532
486
953
827
165
150
259
250
26.1
23.4
55.3
47.5
SERIES 55
55113-1200-00
CODE NUMBER
444
A
1450
B
416 20 1333
°
484 30 1249
°
515 35 1199
°
571 45 °1099
180
E
257
F
25.8
72.1
MASS Kgs.
580
514
1081
892
180
165
270
259
28.8
24.9
62.8
53.0
55113-1350-00
496
1650
433
C
1483
D
510
C
1391
D
545
C
1336
D
608
C
1225
D
180
257
28.2
R.P
78.7
TOTAL
68.8
55.3
55113-1400-00
55113-1200-00
502
444
1700
1450
443
416
1500
1333
521
484
1407
1249
556
515
1352
1199
620
571
1239
1099
200
180
265
257
28.5
25.8
87.1
72.1
76.9
62.8
55113-1500-00
55113-1350-00
549
496
1800
1650
459
433
1636
1483
544
510
1536
1391
583
545
1476
1336
653
608
1352
1225
200
180
265
257
30.3
28.2
92.5
78.7
84.1
68.8
55113-1600-00
55113-1400-00
569
502
2000
1700
486
443
1693
1500
574
521
1590
1407
615
556
1528
1352
687
620
1401
1239
240
200
285
265
31.2
28.5
105.1
87.1
35.4
31.8
96.4
76.9
55113-1800-00
55113-1500-00
633
549
2200
1800
508
459
1878
1636
606
544
1765
1536
651
583
1697
1476
733
653
1555
1352
240
200
285
265
34.2
30.3
117.4
92.5
38.7
34.2
107.8
84.1
55113-2000-00
55113-1600-00
708
569
2400
2000
553
486
2094
1693
663
574
1970
1590
713
615
1895
1528
805
687
1736
1401
280
240
304
285
37.2
31.2
147.8
105.1
317
298
42.3
35.4
140.6
96.4
55113-2200-00
55113-1800-00
787
633
2600
2200
580
508
2321
1878
702
606
2186
1765
759
651
2103
1697
861
733
1927
1555
280
240
304
285
40.8
34.2
160.3
117.4
317
298
46.5
38.7
152.5
107.8
55113-2400-00
55113-2000-00
848
708
2800
2400
641
553
2497
2094
773
663
2353
1970
834
713
2264
1895
944
805
2074
1736
350
280
344
304
43.5
37.2
222.1
147.8
317
42.3
140.6
873
787
2900
2600
649
580
2330
2103
961
861
2135
1927
350
280
344
304
44.7
40.8
228.5
160.3
“00”
Troughing
20˚, 30˚,
45˚.
E – Insert
F required
MASS
Kgs.
2497
773
2353
834 Angle:
2264
94435˚ or2074
350
344
43.5
222.1
350
344
44.7
228.5
NUMBER
870CODE
1909
280
MANUFACTURERS
OF HIGH
EQUIPMENT
21.3
44.0
SERIES
55 QUALITY CONVEYOR
ROLL DIAMETER
152
R.P
TOTAL
Note:
317 A 46.5 B 152.5
20 °
15105-0600-00
E
15105-0650-00
25
30
191
750
226
850
F
246
900
250
577
645
355
341
735
237
379
815165 350
777
246
985 245349
916180 371
1063
990
281
833
322
771
212
280
1000
75 x 75 x 6EA15105-0800-00
165
296
221
1050 165
286
879 234330
90 x 90 x 6EA15105-0900-00
180
100 x 100 x 8EA
200
232
333
1150 180
299
125 x 125 x 8EA
260
360
1250
15105-1050-00150 x 150 x 10EA
385
-
1300
-317
15105-1200-00
438
1450
335
15105-1000-00
Note:
240
240
200
308
240
C
2900
593
679
150
150
624
305
65 x 65 x 5EA
15105-0750-00
D
873
321
735
205
140
C
310
269
140
218
225
253
362
273
E
140
150
200
240
30 °
35 °
C
D
C
ROLLD DIAMETER
152
C
D
649
528is an abbrev
290 iati500
316 Pa453
SERIES
“RP”
on for Rotating
rts.
55 x 55 x 5EA
20 °
278
Note:
35,45,54
& 55 295
262
677
40,50 F
E
B
Note:
iati
on for Rotating
s.
30“RP”
° is an abbrev
35
°848
°rt
55113-2400-00
2800 45Pa
641
15105-0500-00
A
55113-2500-00
55113-2200-00 127
ROLL DIAMETER
Nominated E and F dimensions are based on standard base angle sizes.
These dimensions will vary with a in base angle size as tabulated
C
D below.
C
D
55113-2500-00
ANGLE
PAGE 3
702
150
SERIES 280
15
714
580
827
699
2312
592
2600
733
D
40113-2200-00
2600
787
R.P
280
317
68.7 TOTAL
175.0
BEARING
SIZE
6308
243
F
2085– Insert
674required
1957
724 Angle:
1880
81435˚ or1718
“00”
Troughing
20˚, 30˚,
45˚.
20.7
41.6
MASS Kgs.
ROLL DIAMETER 152
240
298 SIZE
56.7 6308
129.4
BEARING
280
317
68.7
175.0
140
E
40113-2000-00
2400 Part
565
Note:
on for Rotating
s.
787
1867DIAMETER
617
1751 152
661
ROLL
2310
713
2171
769
SERIES 54
BEARING SIZE 6306
45 °
D
SERIES 54
387
F
341
538
2569
785
2421
848
2321
702 SIZE
2186 6205
759
BEARING
2569
60
8.4
20.3
183
9.0
21.2
183
9.9
23.4
707
165
60 259183
10.5
25.1
180
796
60 270183
11.4
27.3
60
183
12.3
31.5
150
668
60
390
257
875
416
946
435
285
TOTAL
848
2330
183
E
60
265
R.P
2421
140
200
861
240
F
243
250
278
298
1135 - 375
1058
280 401
1012
304
453
921
280
60 317183
12.9
33.1
1288
1203
1152
491
1049
60
14.4
36.6
401
431
D
C
961
183
BEARING SIZE 6309
E
D
2135
60 – Insert
183required
7.5Troughing
18.2Angle: 20˚, 30˚, 35˚ or 45˚.
“00”
586
230
785
45 °
F
MASS Kgs.
R.P
TOTAL
BEARING SIZE
6309
3 ROLL INLINE CARRY
SERIES 59 & IMPACT
ROLL DIAMETER 178
CODE NUMBER
A
B
20 °
CODE NUMBER
B
45 °
E
D
C
D
C
D
C
D
F
MASS Kgs.
R.P
TOTAL
59113-0750-00
286
1000
347
870
389
804
408
767
441
699
140
243
31.2
56.9
59113-0800-00
300
1050
359
910
403
843
423
804
458
733
150
250
32.1
59.6
Nominated E and F dimensions are based on
standard base angle sizes. These dimensions
will vary with a in base angel size as
tabulated below.
59113-0900-00
339
1150
372
1022
423
949
445
907
486
827
150
250
35.1
64.6
59113-1000-00
366
1250
390
1100
445
1023
470
978
514
892
165
259
37.2
71.3
59113-1050-00
391
1300
399
1172
458
1091
484
1044
532
953
165
259
39.0
74.5
ANGLE
SERIES
59113-1200-00
444
1450
428
1325
495
1236
525
1184
580
1081
180
270
43.2
84.1
59 & 60
59113-1350-00
496
1650
446
1474
521
1378
555
1321
617
1206
180
270
47.1
91.9
59113-1400-00
502
1700
456
1492
532
1394
567
1337
629
1221
200
278
47.7
100.3
E
F
55 x 55 x 5EA
140
243
65 x 65 x 5EA
150
250
59113-1500-00
549
1800
472
1627
556
1523
594
1461
662
1334
200
278
51.3
106.9
75 x 75 x 6EA
165
259
59113-1600-00
569
2000
499
1685
586
1577
625
1513
697
1382
240
298
52.8
119.8
90 x 90 x 6EA
180
270
100 x 100 x 8EA
200
278
59113-1800-00
633
2200
520
1869
618
1752
662
1682
742
1537
240
298
57.6
133.6
125 x 125 x 8EA
240
298
59113-2000-00
708
2400
565
2085
674
1957
724
1880
814
1718
280
317
63.3
169.4
150 x 150 x 10EA
280
317
59113-2200-00
787
2600
592
2312
714
2173
769
2089
870
1909
280
317
69.3
184.0
ROLL DIAMETER 178
A
BEARING SIZE 6308
35 °
C
Angle:
“00”– Inser
trequired
Troughing
Note: “RP”isan abbreviation
forRotating
Parts.
SERIES 59
30 °
20 °
30 °
BEARING SIZE 6308
35 °
45 °
E
C
D
C
D
C
D
C
D
F
SERIES 60
MASS Kgs.
ROLL DIAMETER 178 IMPACT
CODE NUMBER
R.P
TOTAL
A
B
20 °
30 °
35 °
BEARING SIZE 6309
E
45 °
C
D
C
D
C
D
C
D
F
MASS Kgs.
R.P
TOTAL
59113-0750-00
286
1000
347
870
389
804
408
767
441
699
140
243
31.2
56.9
60113-1000-00
366
1250
390
1100
445
1023
470
978
514
892
165
259
37.8
76.4
59113-0800-00
300
1050
359
910
403
843
423
804
458
733
150
250
32.1
59.6
60113-1050-00
391
1300
399
1172
458
1091
484
1044
532
953
165
259
39.6
79.9
59113-0900-00
339
1150
372
1022
423
949
445
907
486
827
150
250
35.1
64.6
60113-1200-00
444
1450
428
1325
495
1236
525
1184
580
1081
180
270
43.8
90.1
59113-1000-00
366
1250
390
1100
445
1023
470
978
514
892
165
259
37.2
71.3
60113-1350-00
496
1650
446
1474
521
1378
555
1321
617
1206
180
270
47.7
98.2
59113-1050-00
391
1300
399
1172
458
1091
484
1044
532
953
165
259
39.0
74.5
60113-1400-00
502
1700
456
1492
532
1394
567
1337
629
1221
200
278
48.3
106.9
59113-1200-00
444
1450
428
1325
495
1236
525
1184
580
1081
180
270
43.2
84.1
60113-1500-00
549
1800
472
1627
556
1523
594
1461
662
1334
200
278
51.9
114.1
59113-1350-00
496
1650
446
1474
521
1378
555
1321
617
1206
180
270
47.1
91.9
60113-1600-00
569
2000
499
1685
586
1577
625
1513
697
1382
240
298
53.4
127.3
59113-1400-00
502
1700
456
1492
532
1394
567
1337
629
1221
200
278
47.7
100.3
60113-1800-00
633
2200
520
1869
618
1752
662
1682
742
1537
240
298
58.2
139.0
59113-1500-00
549
1800
472
1627
556
1523
594
1461
662
1334
200
278
51.3
106.9
569
2000
499
1685
586
1577
625
1513
697
1382
240
298
52.8
119.8
708
A
787
2400
B
2600
565
59113-1600-00
60113-2000-00
CODE NUMBER
60113-2200-00
280
E
280
317
F
317
59113-1800-00
633
2200
520
1869
618
1752
662
1682
742
1537
240
298
57.6
133.6
59113-2000-00
708
2400
565
2085
674
1957
724
1880
814
1718
280
317
63.3
169.4
59113-2200-00
787
2600
592
2312
714
2173
769
2089
870
1909
280
317
69.3
184.0
350
140
350
150
357
233
357
240
63.9
MASS
69.9
R.P
74.7
24.0
76.5
24.6
174.2
Kgs.
189.4
TOTAL
253.0
50.9
260.3
53.2
forRotating
Parts.
SERIES 60
CODE NUMBER
B
20 °
30 °
BEARING SIZE 6309
35 °
E
45 °
C
D
C
D
C
D
C
D
892
165
F
MASS Kgs.
R.P
TOTAL
259
37.8
76.4
60113-1000-00
366
1250
390
1100
445
1023
470
978
514
60113-1050-00
391
1300
399
1172
458
1091
484
1044
532
953
165
259
39.6
79.9
60113-1200-00
444
1450
428
1325
495
1236
525
1184
580
1081
180
270
43.8
90.1
60113-1350-00
496
1650
446
1474
521
1378
555
1321
617
1206
180
270
47.7
98.2
60113-1400-00
502
1700
456
1492
532
1394
567
1337
629
1221
200
278
48.3
106.9
60113-1500-00
549
1800
472
1627
556
1523
594
1461
662
1334
200
278
51.9
114.1
60113-1600-00
569
2000
499
1685
586
1577
625
1513
697
1382
240
298
53.4
127.3
60113-1800-00
633
2200
520
1869
618
1752
662
1682
742
1537
240
298
58.2
60113-2000-00
CODE NUMBER
60113-2200-00
708
A
787
2400
B
2600
565
E
280
F
317
350
140
350
150
357
221
357
228
MASS
69.9
R.P
74.7
23.4
76.5
24.6
150
228
27.0
SERIES 30
ROLL
DIAMETER
159
IMPACT
2085
674
1957
724
1880
814
139.0
150
240
27.3
57.8
45114-1000-00
366
1250
381
1106
437
1032
462
989
507
906
165
249
29.4
66.7
45114-1050-00
391
1300
390
1178
449
1101
476
1055
525
966
165
249
31.3
70.1
45114-1200-00
444
1450
419
1331
487
1245
518
1195
573
1094
180
260
34.8
79.8
45114-1350-00
496
1650
437
1481
513
1388
548
1332
610
1220
180
260
39.3
88.6
45114-1400-00
502
1700
447
1498
524
1404
559
1348
622
1234
200
268
39.6
98.8
45114-1500-00
549
1800
463
1633
547
1532
586
1472
656
1348
200
268
42.3
105.2
45114-1600-00
569
2000
490
1691
577
1587
617
1524
690
1396
240
288
44.4
120.8
45114-1800-00
633
2200
511
1875
609
1762
654
1693
735
1550
240
288
48.0
134.3
45114-2000-00
708
2400
556
2091
666
1967
716
1891
807
1731
280
307
54.6
172.9
45114-2200-00
787
2600
583
2319
705
2183
761
2099
863
1922
280
307
60.0
188.2
Angle:20˚,30˚,35˚or45˚.
“00”– Inser
trequired
Troughing
SERIES 50
CODE NUMBER
Kgs.
189.4
TOTAL
253.0
47.7
260.3
49.9
BEARING SIZE 6307
2085
674
1957
724
1880
814
1718
20 °
30 °
35 °
45 °
2312
714
2173
769
2089
870
1909
C
D
C
D
C
D
D
2488
784
2340
844
2250
953
2056
876
381
814
400
778
435
713
2560
797
2408
859
2315
971
2116
916
395
852
415
815
452
746
“00”– Inser
trequired
Troughing
Angle:20˚,30˚,35˚or45˚.
1029
414
959
437
918
479
841
forRotating
Parts.
BEARING
SIZE
6307
280
317
63.9
174.2
1718
20 °
30 °
35 °
45 °
592
2312
714
2173
769
2089
870
1909
D
C
D
C
D
C
D
C
60113-2400-00
848
2800
653
2488
784
2340
844
2250
953
2056
686
30114-0750-00
282
1000
320
853
362
794
381
759
415
60113-2500-00
873
2900
662
2560
797
2408
859
2315
971
2116
724
30114-0800-00
298
1050
333
899
377
837
398
801
434
trequired
Troughing
Angle:20˚,30˚,35˚or45˚.
forRotating
Parts. “00”– Inser
814
30114-0900-00
335
1150
345
1006
395
938
419
899
460
592
C
60113-2400-00
848
2800
653
45114-0750-00
286
1000
338
60113-2500-00
873
2900
662
45114-0800-00
300
1050
350
forRotating
Parts.
45114-0900-00
339
1150
363
Angle:
“00”– Inser
trequired
Troughing
A
SERIES 45
A
B
20 °
30 °
35 °
BEARING SIZE 6307
E
45 °
C
D
C
D
C
D
C
D
F
MASS Kgs.
R.P
TOTAL
50114-0750-00
286
1000
347
870
389
804
408
767
441
699
140
243
27.3
53.9
50114-0800-00
300
1050
359
910
403
843
423
804
458
733
150
250
27.6
56.2
54.5
50114-0900-00
339
1150
372
1022
423
949
445
907
486
827
150
250
30.9
61.4
30114-1000-00
362
1250
364
1083
418
1012
443
970
488
879
165
237
29.4
63.0
50114-1000-00
366
1250
390
1100
445
1023
470
978
514
892
165
259
33.9
70.6
30114-1050-00
387
1300
372
1155
430
1080
458
1036
506
939
165
237
31.5
66.7
50114-1050-00
391
1300
399
1172
458
1091
484
1044
532
953
165
259
36.0
74.6
30114-1200-00
440
1450
401
1308
468
1225
499
1176
554
1067
180
248
34.8
76.3
50114-1200-00
444
1450
428
1325
495
1236
525
1184
580
1081
180
270
39.6
84.3
30114-1350-00
492
1650
419
1458
494
1367
529
1313
591
1193
180
248
39.0
85.0
50114-1350-00
496
1650
446
1474
521
1378
555
1321
617
1206
180
270
44.7
94.0
30114-1400-00
498
1700
429
1475
505
1384
540
1329
603
1207
200
256
39.3
95.2
50114-1400-00
502
1700
456
1492
532
1394
567
1337
629
1221
200
278
45.0
104.2
30114-1500-00
545
1800
445
1610
528
1512
567
1453
636
1321
200
256
1461
662
1334
200
278
48.3
110.9
30114-1600-00
565
2000
472
1668
558
1567
599
1505
670
1369
240
276
44.4
119.0
50114-1600-00
569
2000
499
1685
586
1577
625
1513
697
1382
240
298
50.7
126.8
30114-1800-00
629
2200
494
1852
590
1742
636
1674
716
1523
240
276
49.2
130.7
50114-1800-00
633
2200
520
1869
618
1752
662
1682
742
1537
240
298
54.6
140.6
50114-2000-00
708
2400
565
2085
674
1957
724
1880
814
1718
280
317
62.1
180.4
50114-2200-00
787
2600
592
2312
714
2173
769
2089
870
1909
280
317
68.1
196.3
forRotating
Parts.
“00”– Inser
trequired
Troughing
Angle:
THREE ROLL PLAIN
OFFSET TROUGH
BEARING SIZE 6307
SERIES 45
CODE NUMBER
A
B
C
D
C
D
C
D
C
D
45114-0750-00
286
1000
338
876
381
814
400
778
435
45114-0800-00
300
1050
350
916
395
852
415
815
45114-0900-00
339
1150
363
1029
414
959
437
45114-1000-00
366
1250
381
1106
437
1032
462
45114-1050-00
391
1300
390
1178
449
1101
45114-1200-00
444
1450
419
1331
487
1245
45114-1350-00
496
1650
20 °
437
30 °
1481
513
35 °
1388
E
F
R.P
TOTAL
713
140
233
24.0
50.9
452
746
150
240
24.6
53.2
918
479
841
150
240
27.3
57.8
989
507
249
29.4
66.7
476
1055
CODE NUMBER
525
966
165
249
518
1195
573
260
1332
15105-0500-00
610
1220
180
268
548
45 °
SERIES
15
906
165
1094
180
260
45114-1400-00
502
1700
447
1498
524
1404
559
1348
15105-0600-00
622
1234
200
45114-1500-00
549
1800
463
1633
547
1532
586
1472
15105-0650-00
656
1348
200
268
45114-1600-00
569
2000
490
1691
577
1587
617
1524
15105-0750-00
690
1396
240
288
45114-1800-00
633
2200
511
1875
609
1762
654
1693
15105-0800-00
735
1550
240
288
45114-2000-00
708
2400
556
2091
666
1967
716
1891
15105-0900-00
807
1731
280
307
45114-2200-00
787
2600
583
2319
705
2183
761
2099
15105-1000-00
863
1922
280
307
forRotating
Parts.
15105-1050-00
Angle:20˚,30˚,35˚or45˚.
“00”– Inser
trequired
Troughing
15105-1200-00
Note:
A
B
20 °
30 °
35 °
forRotating
Parts.
A
31.3
B
191
226
246
39.3
39.6
ANGLE
79.8
SERIES
30 IMPACT
45 IMPACT
E
55 x 55 x 5EA
140
65 x 65 x 5EA
150
ROLL DIAMETER
127
75 x 75 x 6EA
9030x °90 x 6EA
20 °
70.1
34.8
“00”– Inser
trequired
Troughing
Angle:
Nominated E and F dimensions are based on standard base angle sizes.
These dimensions will vary with a in base angle size as tabulated below.
MASS Kgs.
C
D
C
35 °
100 x 100 x 8EA
D
C
D
125 x 125 x 8EA
200
E
F
E
F
221
140
233
140
243
228
150
240
150
250
249
165
259
248
E
180 Kgs.
MASS
260
180
270
200
268
200
278
288
240
298
307
280
317
BEARING
SIZE1656205
237
165
180
50 IMPACT
F
45 °
F
256
C
D
316
453
60
7.5
240
276
R.P
240
TOTAL
750
250
88.6
577
278
528
290
500
-
183
850
262
98.8
677
295
624
310
593
341
538
60
183
8.4
20.3
900
150 x 150 x 10EA
-
280
18.2
269
105.2
735
305
679
321
645
355
586
60
183
9.0
21.2
280
1000
281
44.4
120.8
833
322
771
341
735
379
668
60
183
9.9
23.4
296
1050
286
48.0
134.3
879
330
815
350
777
390
707
60
183
10.5
25.1
333
1150
299
54.6
172.9
985
349
916
371
875
416
796
60
183
11.4
27.3
360
1250
308
60.0
188.2
1063
362
990
387
946
435
861
60
183
12.3
31.5
42.3
385
1300
317
1135
375
1058
401
1012
453
921
60
183
12.9
33.1
438
1450
335
1288
401
1203
431
1152
491
1049
60
183
14.4
36.6
SERIES 50
CODE NUMBER
MANUFACTURERS
OF HIGH QUALITY
CONVEYOR
50114-1500-00
549
1800
472
1627 EQUIPMENT
556
1523
594
42.3
101.5
BEARING SIZE 6307
E
45 °
C
D
C
D
C
D
C
D
F
MASS Kgs.
R.P
TOTAL
50114-0750-00
286
1000
347
870
389
804
408
767
441
699
140
243
27.3
53.9
50114-0800-00
300
1050
359
910
403
843
423
804
458
733
150
250
27.6
56.2
PAGE 4
SERIES 35
ROLL DIAMETER 152
CODE NUMBER
A
B
20 °
J
30 °
M
J
M
CODE NUMBER
ROLL DIAMETER 127
A
B
20 °
30 °
BEARING SIZE 6305
35 °
45 °
E
J
M
J
M
J
M
J
M
F
TOTAL
M
J
M
F
MASS Kgs.
R.P
TOTAL
1000
446
1227
490
1185
513
1166
551
1117
140
238
17.1
68.8
35116-0800-00
300
1050
458
1267
509
1241
534
1220
568
1151
150
245
17.7
71.3
35116-0900-00
339
1150
468
1361
523
1330
550
1306
596
1245
150
245
19.5
75.4
35116-1000-00
366
1250
489
1457
551
1421
581
1394
631
1324
165
254
20.7
87.0
35116-1050-00
391
1300
494
1510
558
1472
589
1444
634
1356
165
254
21.9
89.8
35116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
265
24.3
105.3
35116-1350-00
496
1650
541
1813
617
1742
655
1704
720
1610
180
265
26.4
113.6
35116-1400-00
502
1700
555
1849
638
1792
678
1753
746
1652
200
273
26.7
120.9
35116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
273
28.8
129.9
35116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
293
29.7
147.1
35116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
293
32.4
161.4
35116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
312
35.7
190.0
35116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
312
39.0
208.2
ROLL DIAMETER 178
CODE NUMBER
R.P
E
J
286
SERIES 40
MASS Kgs.
45 °
35116-0750-00
Note:
SERIES 25
BEARING SIZE 6306
35 °
A
B
20 °
30 °
BEARING SIZE 6306
35 °
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
25116-0750-00
280
1000
431
1199
475
1159
499
1161
537
1092
140
213
10.5
55.4
40116-0750-00
283
1000
446
1227
490
1185
513
1166
551
1117
140
251
20.7
72.1
25116-0800-00
296
1050
444
1245
490
1203
515
1203
556
1131
150
220
10.8
57.6
40116-0800-00
299
1050
458
1267
509
1241
534
1220
568
1151
150
258
21.3
74.9
25116-0900-00
333
1150
453
1333
508
1304
530
1284
575
1206
150
220
11.7
60.6
40116-0900-00
336
1150
468
1361
523
1330
550
1306
596
1245
150
258
23.4
79.3
25116-1000-00
360
1250
475
1430
536
1395
561
1372
610
1285
165
229
12.6
71.5
40116-1000-00
363
1250
489
1457
551
1421
581
1394
631
1324
165
267
24.9
90.9
25116-1050-00
385
1300
480
1483
538
1429
569
1422
621
1331
165
229
13.2
75.2
40116-1050-00
388
1300
494
1510
558
1472
589
1444
634
1356
165
267
26.1
94.0
25116-1200-00
438
1450
509
1635
576
1573
611
1562
669
1459
180
240
14.7
89.4
40116-1200-00
441
1450
524
1663
591
1598
625
1567
683
1484
180
278
28.8
109.8
25116-1350-00
490
1650
527
1785
602
1716
641
1699
706
1584
180
240
16.2
96.7
40116-1350-00
493
1650
541
1813
617
1742
655
1704
720
1610
180
278
31.5
118.7
25116-1400-00
496
1700
540
1821
623
1766
658
1732
732
1628
200
248
16.2
103.9
40116-1400-00
499
1700
555
1849
638
1792
678
1753
746
1652
200
286
31.8
126.0
25116-1500-00
543
1800
549
1918
636
1860
673
1822
751
1713
200
248
17.7
111.6
40116-1500-00
546
1800
564
1946
651
1886
693
1844
765
1738
200
286
34.2
135.3
25116-1600-00
563
2000
533
2013
676
1950
716
1908
801
1789
240
268
18.0
130.4
40116-1600-00
566
2000
598
2041
691
1975
736
1929
813
1814
240
306
35.4
152.8
25116-1800-00
627
2200
608
2217
708
2124
759
2093
845
1944
240
268
19.8
140.1
40116-1800-00
630
2200
623
2245
723
2150
773
2098
859
1969
240
306
38.7
167.4
40116-2000-00
546
2400
661
2423
775
2338
829
2280
924
2136
280
325
42.3
199.9
40116-2200-00
566
2600
684
2632
804
2510
863
2455
965
2298
280
325
46.5
215.4
Note:
Note:
SERIES 30
CODE NUMBER
ROLL DIAMETER 152
A
B
20 °
30 °
SERIES 45
BEARING SIZE 6305
35 °
45 °
E
J
M
J
M
J
M
J
M
F
TOTAL
ROLL DIAMETER 152
CODE NUMBER
MASS Kgs.
R.P
A
B
20 °
30 °
BEARING SIZE 6307
35 °
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
30116-0750-00
283
1000
431
1199
475
1159
499
1161
537
1092
140
226
16.8
61.7
45116-0750-00
284
1000
446
1227
490
1185
513
1166
551
1117
140
238
17.4
71.8
30116-0800-00
299
1050
444
1245
490
1203
515
1203
556
1131
150
233
17.4
64.2
45116-0800-00
298
1050
458
1267
509
1241
534
1220
568
1151
150
245
18.0
74.3
30116-0900-00
336
1150
453
1333
508
1304
530
1284
575
1206
150
233
18.9
67.8
45116-0900-00
337
1150
468
1361
523
1330
550
1306
596
1245
150
245
19.8
79.0
30116-1000-00
363
1250
475
1430
536
1395
561
1372
610
1285
165
242
20.1
80.5
45116-1000-00
364
1250
489
1457
551
1421
581
1394
631
1324
165
254
21.0
90.9
30116-1050-00
388
1300
480
1483
538
1429
569
1422
621
1331
165
242
21.3
83.3
45116-1050-00
389
1300
494
1510
558
1472
589
1444
634
1356
165
254
22.2
94.0
30116-1200-00
441
1450
509
1635
576
1573
611
1562
669
1459
180
253
23.7
98.4
45116-1200-00
442
1450
524
1663
591
1598
625
1567
683
1484
180
265
24.3
109.8
30116-1350-00
493
1650
527
1785
602
1716
641
1699
706
1584
180
253
25.8
106.3
45116-1350-00
494
1650
541
1813
617
1742
655
1704
720
1610
180
265
26.7
118.4
30116-1400-00
499
1700
540
1821
623
1766
658
1732
732
1628
200
261
26.1
113.5
45116-1400-00
500
1700
555
1849
638
1792
678
1753
746
1652
200
273
27.0
126.0
30116-1500-00
546
1800
549
1918
636
1860
673
1822
751
1713
200
261
28.2
122.1
45116-1500-00
547
1800
564
1946
651
1886
693
1844
765
1738
200
273
29.1
132.9
30116-1600-00
566
2000
533
2013
676
1950
716
1908
801
1789
240
281
29.1
141.2
45116-1600-00
567
2000
598
2041
691
1975
736
1929
813
1814
240
293
30.0
150.4
30116-1800-00
630
2200
608
2217
708
2124
759
2093
845
1944
240
281
31.8
152.1
45116-1800-00
631
2200
623
2245
723
2150
773
2098
859
1969
240
293
32.7
164.7
45116-2000-00
706
2400
661
2423
775
2338
829
2280
924
2136
280
312
36.0
193.9
45116-2200-00
785
2600
684
2632
804
2510
863
2455
965
2298
280
312
39.6
208.8
Note:
Note:
SERIES 35
CODE NUMBER
ROLL DIAMETER 152
A
B
20 °
30 °
SERIES 50
BEARING SIZE 6306
35 °
45 °
E
J
M
J
M
J
M
J
M
F
ROLL DIAMETER 178
CODE NUMBER
MASS Kgs.
R.P
TOTAL
A
B
20 °
30 °
BEARING SIZE 6307
35 °
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
35116-0750-00
286
1000
446
1227
490
1185
513
1166
551
1117
140
238
17.1
68.8
50116-0750-00
284
1000
446
1227
490
1185
513
1166
551
1117
140
251
30.3
84.7
35116-0800-00
300
1050
458
1267
509
1241
534
1220
568
1151
150
245
17.7
71.3
50116-0800-00
298
1050
458
1267
509
1241
534
1220
568
1151
150
258
31.5
87.8
35116-0900-00
339
1150
468
1361
523
1330
550
1306
596
1245
150
245
19.5
75.4
50116-0900-00
337
1150
468
1361
523
1330
550
1306
596
1245
150
258
34.2
93.7
35116-1000-00
366
1250
489
1457
551
1421
581
1394
631
1324
165
254
20.7
87.0
50116-1000-00
364
1250
489
1457
551
1421
581
1394
631
1324
165
267
36.3
106.2
35116-1050-00
391
1300
494
1510
558
1472
589
1444
634
1356
165
254
21.9
89.8
50116-1050-00
389
1300
494
1510
558
1472
589
1444
634
1356
165
267
38.4
110.2
35116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
265
24.3
50116-1200-00
442
1450
524
1663
591
1598
625
1567
683
1484
180
278
42.3
127.5
35116-1350-00
496
1650
541
1813
617
1742
655
1704
720
113.6
50116-1350-00
494
1650
541
1813
617
1742
655
1704
720
1610
180
278
46.2
138.2
35116-1400-00
502
1700
555
1849
638
1792
678
1753
THREE
ROLL
PLAIN
1610
180
265
26.4
P/A 1652
OFFSET
746
200 TRAINER
273
26.7
105.3
120.9
50116-1400-00
500
1700
555
1849
638
1792
678
1753
746
1652
200
286
46.8
145.8
35116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
273
28.8
129.9
50116-1500-00
547
1800
564
1946
651
1886
693
1844
765
1738
200
286
50.4
154.2
35116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
293
29.7
147.1
50116-1600-00
567
2000
598
2041
691
1975
736
1929
813
1814
240
306
51.9
172.3
35116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
293
32.4
161.4
50116-1800-00
631
2200
623
2245
723
2150
773
2098
859
1969
240
306
56.7
189.0
35116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
312
35.7
190.0
50116-2000-00
706
2400
661
2423
775
2338
829
2280
924
2136
280
325
62.7
220.3
35116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
312
39.0
208.2
50116-2200-00
785
2600
684
2632
804
2510
863
2455
965
2298
280
325
68.7
237.9
Note:
SERIES 10
ROLL DIAMETER
102
SIZE
6204Angle: 20˚, 30˚, 35˚ or 45˚.
Note: “RP” is an
abbrevOFFSET
iation for Rotating Parts. BEARING
“00” – Insert required
Troughing
CODE NUMBER
SERIES 40
CODE NUMBER
B
20 °
30 °
B
20 °
J
ROLL DIAMETER 178
A
A
J
M
J
M
J
M
45 °
E
M
J
M
J
M
776
394
766
402
738
427
724
60
F 151 MASS
650 Kgs. 372
810
398
798
412
786
438
764
169 R.P 700 TOTAL
378
855
407
847
423
833
451
BEARING133SIZE6006306369
45 °
E
10108-0400-00
35 °
J
10108-0350-00
35 °
30 °
M
J 10108-0450-00
M
F
MASS Kgs.
R.P
TOTAL
177
3.9
39.0
60
177
4.2
40.3
808
60
177
4.5
41.4
40116-0750-00
283
1000
446
1227
490
1185
513
1166
55110108-0500-00
1117
140
251 186 20.7 750 72.1384
910
415
893
132
878
463
848
60
177
4.8
42.7
40116-0800-00
299
1050
458
1267
509
1241
534
1220
56810108-0600-00
1151
150
258 221 21.3 850 74.9395
1012
433
984
452
970
488
933
60
177
5.4
45.2
40116-0900-00
336
1150
468
1361
523
1330
550
1306
59610108-0650-00
1245
150
258 241 23.4 900 79.3399
1050
443
1043
458
1006
495
967
60
177
5.7
46.5
40116-1000-00
363
1250
489
1457
551
1421
581
1394
63110108-0750-00
1324
165
267 275 24.91000 90.9411
1148
455
1119
478
1096
519
1049
60
177
6.3
49.0
40116-1050-00
388
1300
494
1510
558
1472
589
1444
63410108-0800-00
1356
165
267 291 26.11050 94.0416
1194
463
1163
487
1138
530
1088
60
177
6.6
51.2
40116-1200-00
441
1450
524
1663
591
1598
625
1567
68310108-0900-00
1484
180
278 328 28.81150 109.8429
1300
481
1264
508
1236
556
1177
60
177
7.5
53.7
40116-1350-00
493
1650
541
1813
617
1742
655
1704
72010108-1000-00
1610
180
278 355 31.51250 118.7441
1397
501
1355
529
1324
583
1256
60
177
7.8
65.1
40116-1400-00
499
1700
555
1849
638
1792
678
1753
74610108-1050-00
1652
200
286 380 31.81300 126.0443
1432
507
1406
538
1373
593
1302
60
177
8.4
66.8
40116-1500-00
546
1800
564
1946
651
1886
693
1844
76510108-1200-00
1738
200
286 433 34.21450 135.3461
1584
529
1534
562
1496
624
1416
60
177
9.3
71.6
40116-1600-00
566
2000
598
2041
691
1975
736
1929
813
1814
240
306
35.4
152.8
forRotating
Parts.
40116-1800-00
630
2200
623
2245
723
2150
773
2098
859
1969
240
306
38.7
167.4
40116-2000-00
546
2400
661
2423
775
2338
829
2280
924
2136
280
325
42.3
199.9
40116-2200-00
PAGE
5
566
2600
684
2632
804
2510
863
2455
965
2298
280
325
46.5
215.4
Note:
SERIES 11
ROLL DIAMETER 114 OFFSET
CODE NUMBER
“00”– Inser
trequired
Troughing
Angle:20˚,30˚,35˚or45˚.
A
B
20 °
30 °
35 °
BEARING SIZE 6204
45 °
E
F
MASS Kgs.
SERIES 54
CODE NUMBER
ROLL DIAMETER 152
A
B
20 °
30 °
SERIES 59
BEARING SIZE 6308
35 °
45 °
E
J
M
J
M
J
M
J
M
F
ROLL DIAMETER 178
CODE NUMBER
MASS Kgs.
R.P
TOTAL
A
B
20 °
30 °
BEARING SIZE 6308
35 °
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
54116-0750-00
286
1000
446
1227
490
1185
513
1166
551
1117
140
238
18.3
74.5
59116-0750-00
286
1000
446
1227
490
1185
513
1166
551
1117
140
251
31.2
87.4
54116-0800-00
300
1050
458
1267
509
1241
534
1220
568
1151
150
245
18.9
77.3
59116-0800-00
300
1050
458
1267
509
1241
534
1220
568
1151
150
258
32.1
90.5
54116-0900-00
339
1150
468
1361
523
1330
550
1306
596
1245
150
245
20.7
82.0
59116-0900-00
339
1150
468
1361
523
1330
550
1306
596
1245
150
258
35.1
96.4
54116-1000-00
366
1250
489
1457
551
1421
581
1394
631
1324
165
254
21.9
93.9
59116-1000-00
366
1250
489
1457
551
1421
581
1394
631
1324
165
267
37.2
109.2
54116-1050-00
391
1300
494
1510
558
1472
589
1444
634
1356
165
254
22.8
97.0
59116-1050-00
391
1300
494
1510
558
1472
589
1444
634
1356
165
267
39.0
113.2
54116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
265
25.2
113.1
59116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
278
43.2
131.1
54116-1350-00
496
1650
541
1813
617
1742
655
1704
720
1610
180
265
27.6
122.0
59116-1350-00
496
1650
541
1813
617
1742
655
1704
720
1610
180
278
47.1
141.8
54116-1400-00
502
1700
555
1849
638
1792
678
1753
746
1652
200
273
27.6
129.6
59116-1400-00
502
1700
555
1849
638
1792
678
1753
746
1652
200
286
47.7
149.4
54116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
273
29.7
136.8
59116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
286
51.3
158.1
54116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
293
30.6
154.3
59116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
306
52.8
176.2
54116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
293
33.6
168.9
59116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
306
57.6
193.2
54116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
312
36.9
198.4
59116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
325
63.3
228.7
54116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
312
40.2
213.6
59116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
325
69.3
246.9
Note:
SERIES 55
CODE NUMBER
ROLL DIAMETER 152
A
B
Note:
20 °
30 °
SERIES 60
BEARING SIZE 6309
35 °
45 °
E
J
M
J
M
J
M
J
M
F
ROLL DIAMETER 178
CODE NUMBER
MASS Kgs.
R.P
TOTAL
A
B
20 °
30 °
BEARING SIZE 6309
35 °
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
55116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
265
25.8
119.1
60116-1000-00
366
1250
489
1457
551
1421
581
1394
631
1324
165
267
37.8
114.3
55116-1350-00
496
1650
541
1813
617
1742
655
1704
720
1610
180
265
28.2
128.6
60116-1050-00
391
1300
494
1510
558
1472
589
1444
634
1356
165
267
39.6
118.6
55116-1400-00
502
1700
555
1849
638
1792
678
1753
746
1652
200
273
28.5
136.2
60116-1200-00
444
1450
524
1663
591
1598
625
1567
683
1484
180
278
43.8
137.1
55116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
273
30.3
143.7
60116-1350-00
496
1650
541
1813
617
1742
655
1704
720
1610
180
278
47.7
148.1
55116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
293
31.2
161.5
60116-1400-00
502
1700
555
1849
638
1792
678
1753
746
1652
200
286
48.3
156.0
55116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
293
34.2
177.0
60116-1500-00
549
1800
564
1946
651
1886
693
1844
765
1738
200
286
51.9
165.3
55116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
312
37.2
207.1
60116-1600-00
569
2000
598
2041
691
1975
736
1929
813
1814
240
306
53.4
183.7
55116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
312
40.8
223.2
60116-1800-00
633
2200
623
2245
723
2150
773
2098
859
1969
240
306
58.2
198.6
55116-2400-00
848
2800
745
2808
880
2703
944
2633
1056
2430
350
352
43.5
306.9
60116-2000-00
708
2400
661
2423
775
2338
829
2280
924
2136
280
325
63.9
233.5
55116-2500-00
873
2900
761
2917
897
2788
964
2715
1080
2504
350
352
44.7
314.6
60116-2200-00
787
2600
684
2632
804
2510
863
2455
965
2298
280
325
69.9
252.3
60116-2400-00
848
2800
745
2808
880
2703
944
2633
1056
2430
350
365
74.7
337.8
60116-2500-00
873
2900
761
2917
897
2788
964
2715
1080
2504
350
365
76.5
346.4
Note:
Note:
THREE ROLL PLAIN
P/A OFFSET TRAINER
SERIES 10
CODE NUMBER
A
B
20 °
30 °
35 °
BEARING SIZE 6204
45 °
E
J
M
J
M
J
M
J
M
F
MASS Kgs.
R.P
TOTAL
10108-0350-00
133
600
369
776
394
766
402
738
427
724
60
177
3.9
39.0
10108-0400-00
151
650
372
810
398
798
412
786
438
764
60
177
4.2
40.3
10108-0450-00
169
700
378
855
407
847
423
833
451
808
60
177
4.5
41.4
10108-0500-00
186
750
384
910
415
893
132
878
463
848
60
177
4.8
42.7
10108-0600-00
221
850
395
1012
433
984
452
970
488
933
60
177
5.4
45.2
10108-0650-00
241
900
399
1050
443
1043
458
1006
495
967
60
177
5.7
46.5
10108-0750-00
275
1000
411
1148
455
1119
478
1096
519
1049
60
177
6.3
49.0
10108-0800-00
291
1050
416
1194
463
1163
487
1138
530
1088
60
177
6.6
51.2
10108-0900-00
328
1150
429
1300
481
1264
508
1236
556
1177
60
177
7.5
53.7
10108-1000-00
355
1250
441
1397
501
1355
529
1324
583
1256
60
177
7.8
65.1
10108-1050-00
380
1300
443
1432
507
1406
538
1373
593
1302
60
177
8.4
66.8
10108-1200-00
433
1450
461
1584
529
1534
562
1496
624
1416
60
177
9.3
71.6
forRotating
Parts.
SERIES 11
CODE NUMBER
“00”– Inser
trequired
Troughing
Angle:20˚,30˚,35˚or45˚.
A
B
20 °
30 °
35 °
BEARING SIZE 6204
45 °
E
F
MASS Kgs.
PAGE 6
SERIES 35
CODE NUMBER
ROLL DIAMETER 152
A
B
B
CODE NUMBER
60
171
14.0
25.4
35155-0800
902
1050
60
171
14.7
26.6
35155-0900
1002
1150
60
171
16.2
30.6
35155-1000
1102
1250
60
171
17.6
33.2
35155-1050
1152
1300
60
171
18.4
34.5
35155-1200
1302
1450
60
171
20.6
40.5
35155-1350
1502
1650
60
171
23.5
46.0
35155-1400
1552
1700
60
171
24.2
47.4
35155-1500
1652
1800
60
171
25.6
55.2
35155-1600
1852
2000
60
171
28.6
61.3
35155-1800
2052
2200
60
171
31.5
67.4
ROLL
DIAMETER
114
SERIES 40
BEARING
SIZE
6305
E
TOTAL
1000
SERIES
ROLL DIAMETER
127 05
A
MASS Kgs
R.P.
852
Note:
CODE NUMBER
F
35155-0750
SINGLE ROLL PLAIN
FLAT CARRY.
SERIES 25
BEARING SIZE 6306
E
A
F
MASS BKgs
R.P.
E
CODE NUMBER
BEARING
SIZE
6205 178
ROLL
DIAMETER
A F
MASS
B Kgs
R.P.
TOTAL
BEARING SIZE 6306
E
F
TOTAL
MASS Kgs
R.P.
TOTAL
25155-0750
846
1000 05155-0500
60
595
158
8.6 75017.9
60
40155-0750
852152
5.4 1000 10.2
60
184
16.6
28.0
25155-0800
896
1050 05155-0600
60
695
158
9.1 85018.8
60
40155-0800
902152
6.1 1050 12.2
60
184
17.5
29.3
25155-0900
996
1150 05155-0650
60
745
158
10.0 90020.5
60
40155-0900
152
1002
6.5 1150 12.9
60
184
19.2
33.6
25155-1000
1096
1250 05155-0750
60
845
158
10.9 1000
23.8
60
40155-1000
152
1102
7.3 1250 14.3
60
184
20.9
36.4
25155-1050
1146
1300 05155-0800
60
895
158
11.4 1050
24.8
60
40155-1050
152
1152
7.7 1300 15.0
60
184
21.8
37.8
25155-1200
1296
1450 05155-0900
60
995
158
12.8 1150
27.6
60
40155-1200
152
1302
8.5 1450 17.6
60
184
24.3
44.3
25155-1350
1496
1650 05155-1000
60
1095
158
14.6 1250
33.7
60
40155-1350
152
1502
9.3 1650 19.1
60
184
27.8
50.3
25155-1400
1546
1700 05155-1050
60
1145
158
15.1 1300
34.7
60
40155-1400
152
1552
9.7 1700 19.8
60
184
28.6
51.8
25155-1500
1646
1800 05155-1200
60
1295
158
16.0 1450
36.8
60
40155-1500
152
1652
10.91800 22.0
60
184
30.3
59.9
25155-1600
1846
2000 Note:
17.8
40.8
40155-1600
1852
2000
60
184
33.8
66.5
25155-1800
2046
2200
19.6
48.3
40155-1800
2052
2200
60
184
37.2
73.1
Note:
60
iation for Rotating158
“RP” is an abbrev
Parts.
60
158
Note:
CODE NUMBER
SERIES 45
ROLL
DIAMETER
102
BEARING
SIZE
6305
SERIES
ROLL DIAMETER
152 10
SERIES 30
A
B
CODE NUMBER
E
A
F
MASS BKgs
R.P.
CODE NUMBER
E
ROLL
DIAMETER
BEARING
SIZE
6204 152
A F
B Kgs
MASS
R.P.
TOTAL
BEARING SIZE 6307
E
F
TOTAL
MASS Kgs
R.P.
TOTAL
30155-0750
849
1000 10155-0350
60
441
171
13.8 60023.1
45155-0750
60
850144
3.2 1000 6.8
60
171
14.1
26.9
30155-0800
899
1050 10155-0400
60
491
171
14.5 65024.2
45155-0800
60
900144
3.5 1050 7.8
60
171
14.8
28.2
30155-0900
999
1150 10155-0450
60
541
171
MANUFACTURERS
OF HIGH QUALITY
CONVEYOR1150
EQUIPMENT
45155-0900
1000
16.0 70027.9
60
144
3.8
8.4
60
171
16.3
30.8
30155-1000
1099
1250 10155-0500
60
591
171
17.4 75030.4
45155-1000
60
1100
144
4.1 1250 8.9
60
171
17.7
35.2
30155-1050
1149
1300 10155-0600
60
691
171
18.2 85031.6
45155-1050
60
1150
144
4.7 1300 10.0
60
171
18.5
36.6
30155-1200
1299
1450 10155-0650
60
741
171
20.4 90035.2
45155-1200
60
1300
144
5.0 1450 11.4
60
171
20.7
40.7
30155-1350
1499
1650 10155-0750
60
841
171
23.3 1000
42.4
45155-1350
60
1500
144
5.6 1650 12.6
60
171
23.6
48.9
30155-1400
1549
1700 10155-0800
60
891
171
24.0 1050
43.7
45155-1400
60
1550
144
5.9 1700 13.1
24.3
50.4
30155-1500
1649
1800 10155-0900
60
991
171
25.5 1150
46.3
45155-1500
60
1650
144
6.5 1800 14.3
25.8
53.3
30155-1600
1849
2000 10155-1000
60
1091
171
28.4 1250
54.5
45155-1600
60
1850
144
7.1 2000 16.9
60
171
28.7
61.5
30155-1800
2049
2200 10155-1050
60
1141
171
31.3 1300
60.0
45155-1800
60
2050
144
7.5 2200 17.5
60
171
31.6
67.6
Note:
1291
10155-1200
Note:
1450
Note:
60 is an abbreviation for Rotating
144 Parts.
“RP”
CODE NUMBER
CODE NUMBER
ROLL DIAMETER 152
A
19.5
SERIES 11
SERIES 35
8.4
SINGLE
60 ROLL PLAIN171
P/A RETURN
TRAINER
60
171
B
2 - 30
ROLL DIAMETER 114
A
B
C
BEARING SIZE 6204
D
E
SERIES
50 RESERVES THE ROLL DIAMETER
IN THE INTEREST
OF PRODUCT
DEVELOPMENT,
PROK GROUP
BEARING
SIZE 6306
RIGHT TO CHANGE CRITICAL DATA AT ANY TIME WITHOUT PRIOR NOTICE.
CODE NUMBER750
A
B
11163-0500
594
248
830
60
E
F
MASS Kgs
NOMINAL
ONLY. CERTIFIED DRAWINGS ARE AVAILABLE ON REQUEST.
DIMENSIONS
SHOWN ARE
11163-0600
R.P. TOTAL
694
850
248
930
F
178
MASS Kgs
R.P.
BEARING SIZE 6307
TOTAL
25E
5.3
42.4 F
MASS Kgs
60
25
6.1
45.2
R.P.
TOTAL
35155-0750
852
1000
60
171
11163-0650
14.0
25.4
50155-0750
744
900
850
248
980
1000
60
60
25
6.5
46.5 184
24.5
36.0
35155-0800
902
1050
60
171
11163-0750
14.7
26.6
50155-0800
844
1000
900
248
1080
1050
60
60
25
7.3
50.1 184
25.8
37.7
35155-0900
1002
1150
60
171
11163-0800
16.2
30.6
50155-0900
894
1050
1000
248
1130
1150
60
60
25
7.7
51.5 184
28.3
42.8
35155-1000
1102
1250
60
171
11163-0900
17.6
33.2
50155-1000
994
1150
1100
248
1230
1250
60
60
25
8.5
54.4 184
30.9
46.5
35155-1050
1152
1300
60
171
11163-1000
18.4
34.5
50155-1050
1094
1250
1150
248
1330
1300
60
60
25
9.3
57.2 184
32.2
48.3
35155-1200
1302
1450
60
171
11163-1050
20.6
40.5
50155-1200
1144
1300
1300
248
1380
1450
60
60
25
9.7
62.2 184
36.0
56.0
35155-1350
1502
1650
60
171
11163-1200
23.5
46.0
50155-1350
1294
1450
1500
255
1530
1650
60
60
25
10.9
65.4 184
41.1
64.6
35155-1400
1552
1700
60
171
24.2 “RP”47.4
Note:
is an abbreviation 50155-1400
for Rotating Parts.
35155-1500
1652
1800
60
171
25.6
55.2
35155-1600
1852
2000
60
171
28.6
35155-1800
2052
2200
60
171
31.5
Note:
1550
1700
60
184
42.3
65.6
50155-1500
1650
1800
60
184
44.9
69.4
61.3
50155-1600
1850
2000
60
184
49.9
82.7
67.4
50155-1800
2050
2200
60
184
55.1
91.0
Note:
SERIES 12
CODE NUMBER
SERIES 40
CODE NUMBER
ROLL DIAMETER 178
A
B
ROLL DIAMETER 127
A
B
C
BEARING SIZE 6204
D
E
F
BEARING SIZE 6306
E
F
MASS Kgs
R.P.
TOTAL
12163-0500
MASS Kgs
596
750
248
830
60
32
6.2
43.3
12163-0600
R.P. TOTAL
696
850
248
930
60
32
7.1
46.2
40155-0750
852
1000
60
184
12163-0650
16.6
28.0
746
900
248
980
60
32
7.6
47.5
40155-0800
902
1050
60
184
12163-0750
17.5
29.3
846
1000
248
1080
60
32
8.5
51.3
40155-0900
1002
1150
60
184
12163-0800
19.2
33.6
896
1050
248
1130
60
32
9.0
52.8
40155-1000
1102
1250
60
184
12163-0900
20.9
36.4
996
1150
248
1230
60
32
9.9
55.7
40155-1050
1152
1300
60
184
12163-1000
21.8
37.8
1096
1250
248
1330
60
32
10.8
58.7
40155-1200
1302
1450
60
184
12163-1050
24.3
44.3
1146
1300
248
1380
60
32
11.3
60.1
40155-1350
1502
1650
60
184
12163-1200
27.8
50.3
1296
1450
255
1530
60
32
12.6
67.1
40155-1400
1552
1700
60
184
12163-1350
28.6
51.8
1496
1650
277
1730
60
32
14.5
86.6
40155-1500
1652
1800
60
184
12163-1400
30.3
59.9
1546
1700
277
1780
60
32
14.9
88.5
40155-1600
1852
2000
60
184
33.8 “RP”66.5
Note:
is an abbreviation for Rotating Parts.
40155-1800
2052
2200
60
184
Note:
37.2
73.1
PAGE 7
IN THE INTEREST OF PRODUCT DEVELOPMENT, PROK GROUP RESERVES THE
SINGLE ROLL PLAIN
FLAT CARRY.
SERIES
ROLL DIAMETER
152 05
SERIES 54
CODE NUMBER
A
B
CODE NUMBER E
ROLL
DIAMETER
114
SERIES 59
BEARING
SIZE
6308
A
F
B
MASS Kgs
R.P.
TOTAL
E
CODE NUMBER
BEARING
6205 178
ROLLSIZE
DIAMETER
A
F
MASS
B Kgs
R.P.
BEARING SIZE 6308
E
F
TOTAL
MASS Kgs
R.P.
TOTAL
54155-0750
852
1000
05155-0500
60
595 171
14.4
750
27.3
60
59155-0750
852 152
5.41000 10.2
60
184
24.7
40.7
54155-0800
902
1050
05155-0600
60
695 171
15.1
850
30.1
60
59155-0800
902 152
6.11050 12.2
60
184
26.0
42.7
54155-0900
1002
1150
05155-0650
60
745 171
16.5
900
32.9
60
59155-0900
1002152
6.51150 12.9
60
184
28.6
46.7
54155-1000
1102
1250
05155-0750
60
845 171
18.0
1000
35.6
60
59155-1000
1102152
7.31250 14.3
60
184
31.1
52.2
54155-1050
1152
1300
05155-0800
60
895 171
18.7
1050
39.1
60
59155-1050
1152152
7.71300 15.0
60
184
32.4
54.2
54155-1200
1302
1450
05155-0900
60
995 171
20.9
1150
43.5
60
59155-1200
1302152
8.51450 17.6
60
184
36.2
65.8
54155-1350
1502
1650
05155-1000
60
1095 171
23.8
1250
51.2
60
59155-1350
1502152
9.31650 19.1
60
184
41.3
74.8
54155-1400
1552
1700
05155-1050
60
1145 171
24.6
1300
52.7
60
59155-1400
1552152
9.71700 19.8
60
184
42.5
77.1
54155-1500
1652
1800
05155-1200
60
1295 171
26.0
1450
55.8
60
59155-1500
1652152
10.9
1800 22.0
60
184
45.1
81.6
54155-1600
1852
2000 Note:
28.9
68.1
59155-1600
1852
2000
60
184
50.1
96.2
54155-1800
2052
2200
31.8
74.9
59155-1800
2052
2200
60
184
55.2
105.9
Note:
60
171
Note:
SERIES
ROLL DIAMETER
152 10
SERIES 55
CODE NUMBER
A
B
55155-1000
1102
1250
55155-1050
1152
1300
55155-1200
1302
1450
55155-1350
1502
1650
55155-1400
1552
1700
55155-1500
1652
1800
55155-1600
1852
2000
55155-1800
2052
2200
Note:
“RP” is an60abbreviation for Rotating
171Parts.
CODE NUMBER
10155-0350
10155-0400
10155-0450
10155-0500
10155-0600
10155-0650
10155-0750
10155-0800
E
60
60
60
60
60
60
60
60
ROLL
DIAMETER
102
SERIES 60
BEARING
SIZE
6309
A
441
491
541
591
691
741
841
891
F
B
MASS Kgs
A
F
MASS
B Kgs
R.P.
BEARING SIZE 6309
E
F
TOTAL
TOTAL
171
18.2
600
39.4
60
60155-1000
1102144
3.21250
6.8
60
171
18.9
650
45.7
60
60155-1050
1152144
3.51300
7.8
60
MASS Kgs
R.P.
TOTAL
184
31.3
57.1
184
32.6
59.3
MASS Kgs
41.5
75.2
171
MANUFACTURERS
OF
HIGH QUALITY
CONVEYOR
EQUIPMENT
700
60 45
3.81450 8.4
SERIES
159
60155-1200
1302144 ROLL DIAMETER
21.1
50.9
171
24.0
750
57.7
CODE NUMBER
60
60155-1350
A 144
1502
B
4.11650
8.9
E
60
F
184
171
24.8
850
59.5
60
60155-1400
1552144
4.71700 10.0
60
184
R.P.
42.8
TOTAL
77.5
171
26.2
900
62.9
45156-0600
60
60155-1500
685 144
1652
850 11.4
5.01800
60
60
174
184
16.9
45.3
26.9
82.0
171
29.1
1000
75.3
45156-0650
60
60155-1600
735 144
1852
900 12.6
5.62000
60
60
174
184
18.4
50.4
28.9
96.6
171
32.1
1050
82.8
45156-0750
60
60155-1800
835 144
2052
5.91000
2200 13.1
20.4
55.5
33.2
106.2
BEARING
SIZE
184
36.4 6307
66.1
60
SINGLE
60
60 ROLL PLAIN174
184
P/A RETURN
TRAINER
60
174
991
1150
21.9
35.2
1091
1250
45156-0800
885 144
60
45156-0900
985 144
60
6.51050 14.3
10155-1000
7.11150 16.9
60
174
23.9
38.4
10155-1050
1141
1300
45156-1000
60
1085144
7.51250 17.5
60
174
26.4
42.0
10155-1200
1291
1450
45156-1050
60
1135144
8.41300 19.5
60
174
27.8
45.9
45156-1200
1285
1450
60
174
31.3
51.4
45156-1350
1485
1650
60
174
36.3
61.6
60
BEARING
SIZE 6204174
37.3
63.4
CODE NUMBER
45156-1400
45156-1500
A
1535
ROLL DIAMETER
114
B
1700
F60
MASS Kgs 174
39.8
67.3
60
R.P.
TOTAL174
44.7
77.5
60
60
25
5.3
42.4 174
49.2
85.2
930
60
25
6.1
45.2
1635
C
D
1800
1835 THE
2000
45156-1600
IN THE INTEREST OF PRODUCT DEVELOPMENT,
PROK GROUP RESERVES
2035
2200
45156-1800
11163-0500
248
830
ONLY. CERTIFIED594
DRAWINGS 750
ARE AVAILABLE
ON REQUEST.
DIMENSIONS SHOWN ARE NOMINAL
2 - 30
ROLL DIAMETER 159
A
BEARING
6204 178
ROLLSIZE
DIAMETER
R.P.
SERIES 11
CODE NUMBER
E
CODE NUMBER
10155-0900
Note:
SERIES 45
B
11163-0600
694
11163-0650
11163-0750
BEARING SIZE
6307
11163-0800
E
F
E
850
248
744
900
248
980
60
25
6.5
46.5
844
1000
248
1080
60
25
7.3
50.1
25
7.7
51.5
60
E
25
8.5
54.4
60
25
9.3
57.2
60
60
25
9.7
62.2
60
60
25
10.9
65.4
SERIES 50
1050
ROLL
178
1130 DIAMETER
60
894
248
MASS Kgs
11163-0900
CODE NUMBER
994
1150
A
248
1230
R.P. TOTAL
11163-1000
1094
1250
248
1330
45156-0600
685
850
60
174
16.9
26.9
11163-1050
50156-0600
1144
1300
685
248
1380
45156-0650
735
900
60
174
18.4
28.9
11163-1200
50156-0650
1294
1450
735
255
1530
45156-0750
835
1000
60
174
45156-0800
885
1050
60
174
20.4
33.2
50156-0750
21.9
35.2
50156-0800
45156-0900
985
1150
60
174
23.9
38.4
45156-1000
1085
1250
60
174
26.4
45156-1050
1135
1300
60
174
45156-1200
1285
1450
60
45156-1350
1485
1650
45156-1400
1535
45156-1500
B
850
900
BEARING SIZE 6307
F
MASS Kgs
R.P.
TOTAL
184
19.1
29.1
184
20.1
31.3
835
1000
60
184
23.0
35.9
885
1050
60
184
24.8
38.1
50156-0900
985
1150
60
184
27.0
41.5
42.0
50156-1000
1085
1250
60
184
29.9
47.4
27.8
45.9
50156-1050
1135
1300
60
184
31.6
49.7
174
31.3
51.4
50156-1200
1285
1450
60
184
35.5
55.6
60
174
36.3
61.6
50156-1350
1485
1650
60
184
41.2
66.6
1700
60
174
42.4
68.4
1635
1800
60
174
60
BEARING
SIZE 6204184
45156-1600
1835
2000
60
174
45156-1800
2035
2200
60
174
SERIES 50
CODE NUMBER
ROLL DIAMETER 178
A
B
63.4
37.3
SERIES
12
39.8 NUMBER
67.3
CODE
44.7
F
50156-1500
A
1535
ROLL DIAMETER
127
B
1635
C
1700
D
1800
F60
MASS Kgs 184
45.2
72.7
60
R.P.
TOTAL184
50.9
83.7
60
60
32
6.2
43.3 184
56.0
91.9
E
77.5
50156-1600
49.2
85.2
12163-0500
50156-1800
596
750
2035
248
830
12163-0600
696
850
248
930
60
32
7.1
46.2
12163-0650
746
900
248
980
60
32
7.6
47.5
12163-0750
846
1000
248
1080
60
32
8.5
51.3
896
1050
248
1130
60
32
9.0
52.8
MASS Kgs
12163-0900
996
1150
248
1230
60
32
9.9
55.7
R.P. TOTAL
12163-1000
1096
1250
248
1330
60
32
10.8
58.7
BEARING SIZE
6307
12163-0800
E
50156-1400
1835
2000
2200
50156-0600
685
850
60
184
19.1
29.1
12163-1050
1146
1300
248
1380
60
32
11.3
60.1
50156-0650
735
900
60
184
20.1
31.3
12163-1200
1296
1450
255
1530
60
32
12.6
67.1
50156-0750
835
1000
60
184
23.0
35.9
12163-1350
1496
1650
277
1730
60
32
14.5
86.6
50156-0800
885
1050
60
184
24.8
38.1
12163-1400
1546
1700
277
1780
60
32
14.9
88.5
50156-0900
985
1150
60
184
50156-1000
1085
1250
60
184
27.0
41.5
29.9
47.4
50156-1050
1135
1300
60
184
31.6
49.7
50156-1200
1285
1450
60
184
35.5
55.6
50156-1350
1485
1650
60
184
41.2
66.6
50156-1400
1535
1700
60
184
42.4
68.4
PAGE 8
SERIES 35
ROLL DIAMETER 152
CODE NUMBER
A
E
SERIES 25
CODE NUMBER
A
ROLL DIAMETER 127
A
B
E
05161-0500
05161-0600
60
38
14.0
22.4
35161-0800
902
1050
60
38
14.8
23.5
60
38
16.2
27.0
35161-1000
1102
1250
60
38
17.7
29.3
35161-1050
1152
1300
60
38
18.4
30.4
35161-1200
1302
1450
60
38
20.6
33.9
35161-1350
1502
1650
60
38
23.5
40.6
35161-1400
1552
1700
60
38
24.2
41.8
35161-1500
1652
1800
60
38
25.7
44.2
35161-1600
1852
2000
60
38
28.6
52.0
35161-1800
2052
2200
60
38
31.5
57.1
BEARING SIZE 6305
595
695
F
F
CODE NUMBER
60
A
19
SERIES 40
MASS Kgs
750
R.P. TOTAL
850
8.7
15.5
900
9.1
16.2
1000
10.0
18.9
1050
10.9
20.5
1150
11.4
21.3
1250
12.8
23.6
1300
14.6
29.0
1450
15.1
29.8
60
40161-0750
60
40161-0800
60
40161-0900
60
40161-1000
60
40161-1050
60
40161-1200
60
40161-1350
60
40161-1400
19
852
19
902
19
1002
19
1102
19
1152
19
1302
19
1502
19
1552
16.0
31.6
40161-1500
1652
846
1000
25161-0800
896
1050
25161-0900
996
1150
25161-1000
1096
1250
25161-1050
1146
1300
25161-1200
1296
1450
25161-1350
1496
1650
25161-1400
1546
25161-1500
1646
1700
Note:
1800
25161-1600
1846
2000
60
25
17.8
35.1
40161-1600
25161-1800
2046
2200
60
25
19.7
41.5
40161-1800
05161-0650
60
05161-0750
60
05161-0800
60
05161-0900
60
05161-1000
60
05161-1050
60
05161-1200
745
845
895
995
1095
1145
1295
25
BEARING SIZE 6205
E
25161-0750
Note:
60
B
25
25
25
25
25
25
60
25
60
25
Note:
SERIES 10
CODE NUMBER
ROLL DIAMETER 152
A
B
10161-0350
10161-0400
30161-0750
849
1000
30161-0800
899
1050
30161-0900
999
1150
30161-1000
1099
1250
30161-1050
1149
1300
30161-1200
1299
1450
30161-1350
1499
1650
30161-1400
1549
1700
30161-1500
1649
1800
30161-1600
1849
2000
30161-1800
2049
2200
Note:
Note:
E
60
10161-0450
60
10161-0500
60
10161-0600
60
10161-0650
60
10161-0750
60
10161-0800
60
10161-0900
60
10161-1000
60
10161-1050
60
10161-1200
B
BEARING SIZE 6305
441
491
541
591
691
741
841
891
991
1091
1141
1291
F
38
38
38
38
38
38
38
38
38
38
60
38
MASS Kgs
600
R.P. TOTAL
650
13.8
20.6
700
14.6
21.6
750
16.0
24.9
850
17.5
27.1
900
18.2
28.1
1000
20.4
31.4
1050
23.3
37.7
1150
24.0
38.8
1250
25.5
41.1
1300
28.4
45.7
1450
31.3
53.2
5.4
6.1
B
A
B
BEARING SIZE 6306
E
F
TOTAL
16.6
25.0
60
51
17.5
27.5
60
51
19.2
30.0
60
51
20.9
32.6
60
51
21.8
33.8
60
51
24.3
39.5
60
51
27.8
44.9
60
51
28.6
46.2
1800
60
51
30.4
48.9
1852
2000
60
51
33.8
57.2
2052
2200
60
51
37.2
62.8
7.3
7.7
8.5
9.3
9.7
10.9
BEARING SIZE 6204
E
F
CODE NUMBER
60
A
11
60
45161-0750
60
45161-0800
60
45161-0900
60
45161-1000
60
45161-1050
60
45161-1200
60
45161-1350
60
45161-1400
60
45161-1500
60
45161-1600
60
45161-1800
MASS Kgs
ROLLR.P.
DIAMETER
152
TOTAL
3.2
11
850
11
900
11
1000
11
1100
11
1150
11
1300
11
1500
11
1550
11
1650
11
1850
11
2050
3.5
3.8
B
1000
1050
4.7
5.0
5.6
5.9
6.5
7.2
7.5
8.4
1250
BEARING SIZE 6307
E
6.3
6.8
7.3
9.1
9.6
1300
11.4
1450
11.9
1650
13.0
1700
14.1
1800
14.6
2000
16.2
2200
F
MASS Kgs
R.P.
TOTAL
60
38
14.1
25.1
60
38
14.8
26.3
60
38
16.3
28.7
60
38
17.8
31.1
60
38
18.5
32.3
60
38
20.7
36.0
60
38
23.6
40.8
24.3
44.5
25.8
47.0
SINGLE
60 ROLL PLAIN 38
P/A RETURN
TRAINER38
60
60
38
28.7
52.2
60
38
31.6
60.8
SERIES 11
ROLL
DIAMETER 152
2 - 40
MASS Kgs
51
6.5
ROLL DIAMETER 114
BEARING SIZE 6204
CODE NUMBER
A
C
D
DATA AT ANY TIME
WITHOUTB PRIOR NOTICE.
RIGHT TO CHANGE CRITICAL
DIMENSIONS SHOWN ARE NOMINAL ONLY. CERTIFIED DRAWINGS ARE AVAILABLE ON REQUEST.
SERIES 35
F
R.P.
11.2
1000
11.9
1050
13.1
1150
13.8
1250
15.0
1300
16.3
1450
18.2
1650
20.2
1700
60
SERIES 45
Note:
BEARING SIZE 6306
E
10.0
4.1 EQUIPMENT
7.7
MANUFACTURERS OF HIGH QUALITY CONVEYOR
1150
CODE NUMBER
MASS Kgs
ROLLR.P.
DIAMETER
178
TOTAL
ROLL DIAMETER 102
A
CODE NUMBER
SERIES 30
TOTAL
1000
ROLL DIAMETER 114
CODE NUMBER
MASS Kgs
R.P.
852
Note:
SERIES 05
F
35161-0750
MANUFACTURERS OF HIGH QUALITY
CONVEYOR
EQUIPMENT
35161-0900
1002
1150
SINGLE ROLL PLAIN
FLAT RETURN
BEARING SIZE 6306
B
SERIES 50
E
F
ROLL DIAMETER 178
MASS Kgs
11163-0500
CODE NUMBER750
594
248A
830
R.P. TOTAL
11163-0600
694
850
248
930
B
MASS Kgs
BEARING SIZE 6307
R.P.
TOTAL
60
25E
5.3
42.4
60
25
6.1
45.2
F
R.P.
MASS Kgs
TOTAL
35161-0750
852
1000
60
38
14.0
22.4
11163-0650
50161-0750
744
900
850
248
980
1000
60
2560
6.5
46.5 51
24.5
35.5
35161-0800
902
1050
60
38
14.8
23.5
11163-0750
50161-0800
844
1000
900
248
1080
1050
60
2560
7.3
50.1 51
25.8
37.2
35161-0900
1002
1150
60
38
16.2
27.0
11163-0800
50161-0900
894
1050
1000
248
1130
1150
60
2560
7.7
51.5 51
28.3
40.7
35161-1000
1102
1250
60
38
17.7
29.3
11163-0900
50161-1000
994
1150
1100
248
1230
1250
60
2560
8.5
54.4 51
30.9
44.2
35161-1050
1152
1300
60
38
18.4
30.4
11163-1000
50161-1050
1094
1250
1150
248
1330
1300
60
2560
9.3
57.2 51
32.2
46.0
35161-1200
1302
1450
60
38
20.6
33.9
11163-1050
50161-1200
1144
1300
1300
248
1380
1450
60
2560
9.7
62.2 51
36.0
51.3
35161-1350
1502
1650
60
38
23.5
40.6
11163-1200
50161-1350
1294
1450
1500
255
1530
1650
60
2560
10.9
65.4 51
41.1
60.6
35161-1400
1552
1700
60
38
50161-1400
Rotating Parts.
Note:24.2 “RP”41.8
is an abbreviation for
35161-1500
1652
1800
60
38
25.7
44.2
35161-1600
1852
2000
60
38
28.6
35161-1800
2052
2200
60
38
31.5
Note:
1550
1700
60
51
42.4
62.5
50161-1500
1650
1800
60
51
44.9
66.1
52.0
50161-1600
1850
2000
60
51
50.0
73.5
57.1
50161-1800
2050
2200
60
51
55.1
84.2
Note:
SERIES 12
CODE NUMBER
SERIES 40
CODE NUMBER
ROLL DIAMETER 178
A
B
ROLL DIAMETER 127
A
B
C
BEARING SIZE 6204
D
E
F
BEARING SIZE 6306
E
F
MASS Kgs
R.P.
TOTAL
MASS Kgs
12163-0500
596
750
248
830
60
32
6.2
43.3
R.P. TOTAL
12163-0600
696
850
248
930
60
32
7.1
46.2
40161-0750
852
1000
60
51
16.6
25.0
12163-0650
746
900
248
980
60
32
7.6
47.5
40161-0800
902
1050
60
51
17.5
27.5
12163-0750
846
1000
248
1080
60
32
8.5
51.3
40161-0900
1002
1150
60
51
19.2
30.0
12163-0800
896
1050
248
1130
60
32
9.0
52.8
40161-1000
1102
1250
60
51
20.9
32.6
12163-0900
996
1150
248
1230
60
32
9.9
55.7
40161-1050
1152
1300
60
51
21.8
33.8
12163-1000
1096
1250
248
1330
60
32
10.8
58.7
40161-1200
1302
1450
60
51
24.3
39.5
12163-1050
1146
1300
248
1380
60
32
11.3
60.1
40161-1350
1502
1650
60
51
27.8
44.9
12163-1200
1296
1450
255
1530
60
32
12.6
67.1
40161-1400
1552
1700
60
51
28.6
46.2
12163-1350
1496
1650
277
1730
60
32
14.5
86.6
40161-1500
1652
1800
60
51
30.4
48.9
12163-1400
1546
1700
277
1780
60
32
14.9
88.5
40161-1600
1852
2000
60
51
Note:33.8 “RP”57.2
is an abbreviation for Rotating Parts.
40161-1800
2052
2200
60
51
Note:
37.2
62.8
PAGE 9
SINGLE ROLL PLAIN
FLAT RETURN
SERIES 05
ROLL DIAMETER 114
CODE NUMBER
SERIES 54
A
ROLL DIAMETER 152
CODE NUMBER
A
B
E
05161-0500
B
BEARING SIZE 6308
F
595
MASS Kgs
750
R.P. TOTAL
850
14.4
26.8
900
15.1
28.1
1000
16.6
30.7
1050
18.0
33.2
1150
18.7
34.5
1250
20.9
38.4
1300
23.9
43.5
1450
24.6
44.8
CODE NUMBER
60
60
59161-0750
60
59161-0800
60
59161-0900
60
59161-1000
60
59161-1050
60
59161-1200
60
59161-1350
60
59161-1400
19
852
19
902
19
1002
19
1102
19
1152
19
1302
19
1502
19
1552
26.0
50.2
59161-1500
1652
54161-0750
852
54161-0800
902
54161-0900
1002
54161-1000
1102
54161-1050
1152
54161-1200
1302
54161-1350
1502
54161-1400
1552
54161-1500
1652
54161-1600
1852
2000
60
38
29.0
55.7
59161-1600
54161-1800
2052
2200
60
38
31.9
61.2
59161-1800
38
745
38
845
38
895
38
995
1095
1145
1295
38
38
38
38
Rotating Parts.
38
Note:
SERIES 10
ROLL DIAMETER 152
CODE NUMBER
A
55161-1000
1102
55161-1050
1152
55161-1200
1302
55161-1350
1502
55161-1400
1552
55161-1500
1652
55161-1600
1852
55161-1800
2052
Note:
B
E
10161-0350
10161-0400
1250
10161-0450
1300
10161-0500
1450
10161-0600
1650
10161-0650
1700
10161-0750
1800
10161-0800
2000
10161-0900
2200
10161-1000
B
BEARING SIZE 6309
F
441
MASS Kgs
600
R.P. TOTAL
650
18.2
37.5
700
19.0
38.9
750
21.2
43.3
850
24.1
49.1
900
24.8
50.6
1000
26.3
53.5
1050
29.2
61.7
1150
32.1
67.8
1250
491
60
38
541
60
38
591
60
60
38
741
60
38
841
60
38
891
60
38
991
60
1091
5.4
6.1
38
TOTAL
51
24.7
37.2
60
51
26.0
39.0
60
51
28.6
42.7
60
51
31.1
46.4
60
51
32.4
48.2
60
51
36.2
55.9
60
51
41.3
63.6
60
51
42.5
68.3
1800
60
51
45.1
72.3
1852
2000
60
51
50.2
82.6
2052
2200
60
51
55.2
90.9
7.3
7.7
8.5
9.3
9.7
10.9
BEARING SIZE 6204
E
F
SERIES 60
CODE NUMBER
60
A
11
60
60161-1000
60
60161-1050
60
60161-1200
60
60161-1350
CODE 60
NUMBER
60161-1400
60
60161-1500
60
45162-0600
60161-1600
60
45162-0650
60161-1800
60
45162-0750
11
1102
11
1152
11
1302
11
1502
11
A
1552
11
1652
685 11
1852
735 11
2052
835 11
MASS Kgs
ROLLR.P.
DIAMETER
178
TOTAL
3.2
3.5
B
BEARING SIZE 6309
E
6.3
F
MASS Kgs
R.P.
TOTAL
1000
7.2
6.8
1250
7.3
1300
7.7
1450
9.1
1650
9.6
E
1700
11.4
1800
11.9
60
2000
13.0
60
2200
14.1
60
7.5
14.6
60
38
153
875
17.1
28.5
8.4
16.2
60
38
153
975
18.9
31.3
3.8
60
51
31.4
50.6
60
51
32.6
52.6
51
36.5
5.0
58.6
51
41.6
MASS
42.8
R.P.
45.4
14.2
50.5
14.8
55.3
16.6
B
5.6
850
5.9
900
6.5
F
66.6
Kgs
68.6
TOTAL
72.6
23.7
83.6
24.7
97.7
27.5
38
60
60
60
60
BEARING SIZE 6307
G
51
153
51
675
51
725
51
825
153
SINGLE
ROLL PLAIN
60
P/A38RETURN 153
TRAINER
38
H
1141
1300
1291
1450
60
45162-0900
985
45162-1000
1085
1250
60
38
153
1075
20.7
34.1
45162-1050
1135
1300
60
38
153
1125
21.3
35.1
45162-1200
1285
1450
60
38
153
1275
23.7
38.9
45162-1350
1485
1650
60
38
153
1425
26.6
43.8
45162-1400
1535
1700
60
1475
27.2
44.8
1575
29.6
50.9
1675
32.6
56.0
1875
35.5
61.2
11
1150
CODE NUMBER
A WITHOUT BPRIOR NOTICE.
C
D
DATA AT ANY TIME
RIGHT TO CHANGE CRITICAL
45162-1500 ARE AVAILABLE
1635 ON REQUEST.
1800
DIMENSIONS SHOWN ARE NOMINAL ONLY. CERTIFIED DRAWINGS
11163-0600
11163-0650
744
900
248
11163-0750
844
1000
248
11163-0800
894
1050
248
994
1150
CODE NUMBER
1094
1250
BEARING SIZE 6307
750
850
685
850
60
38
153
675
45162-0650
735
900
60
38
153
725
45162-0750
835
1000
60
38
153
825
50162-0750
16.6
27.5
45162-0800
885
1050
60
38
153
875
17.1
28.5
45162-0900
985
1150
60
38
153
975
18.9
45162-1000
1085
1250
60
38
153
1075
45162-1050
1135
1300
60
38
153
45162-1200
1285
1450
60
38
45162-1350
1485
1650
60
45162-1400
1535
1700
45162-1500
1635
45162-1600
45162-1800
F
G
H
2035
SERIES 50
45162-0600
E
1835
45162-1600
594
45162-1800
694
11163-0500
11163-0900
MASS Kgs
11163-1000
R.P. TOTAL
11163-1050
14.2
23.7
11163-1200
14.8
24.7
1144
50162-0600
1294
50162-0650
1300
1450
A
685
735
248
248
248
248
248
255
2000
2200
830
930
60
60
60
BEARING SIZE 6204
E
60
60
38
38
38
38
F
25
25
850
900
Kgs
TOTAL
42.4
45.2
980
60
25
6.5
46.5
1080
60
25
7.3
50.1
1130
60
25
7.7
51.5
25
8.5
G
9.3
54.4
9.7
153
10.9
153
62.2
ROLL DIAMETER 178 DISC
B
153
MASS
204
R.P.
204
5.3
204
6.1
1230
1330
1380
1530
E
60
60
60
60
60
60
F
51
51
25
25
25
BEARING SIZE 6307
57.2
65.4
H
MASS Kgs
R.P.
TOTAL
675
16.5
26.0
725
17.1
27.1
835
1000
60
51
153
825
19.2
30.1
50162-0800
885
1050
60
51
153
875
19.8
31.2
31.3
50162-0900
985
1150
60
51
153
975
21.9
34.3
20.7
34.1
50162-1000
1085
1250
60
51
153
1075
24.1
37.3
1125
21.3
35.1
50162-1050
1135
1300
60
51
153
1125
24.5
38.4
153
1275
23.7
38.9
50162-1200
1285
1450
60
51
153
1275
27.2
42.5
38
153
1425
26.6
43.8
50162-1350
1485
1650
60
51
153
1425
30.4
47.6
60
38
153
1475
1475
31.0
51.1
1800
60
38
204
1575
1575
34.1
55.3
1835
2000
60
38
204
1675
1675
37.3
60.8
2035
2200
60
38
204
1875
1875
40.5
66.2
SERIES 50
SERIES 12
ROLL DIAMETER 127
50162-1400
A
50162-1500
32.6
56.0
12163-0500
35.5
61.2
12163-0600
50162-1600
596
50162-1800
696
12163-0650
746
900
248
980
60
32
7.6
47.5
12163-0750
846
1000
248
1080
60
32
8.5
51.3
12163-0800
896
1050
248
1130
60
32
9.0
52.8
996
1150
248
1230
60
32
9.9
55.7
1096
1250
248
1330
60
32
10.8
58.7
1146
1300
248
1380
60
32
11.3
60.1
1296
1450
255
1530
60
32
12.6
67.1
1496
1650
277
1730
60
32
14.5
86.6
1546
1700
277
1780
60
32
14.9
88.5
BEARING SIZE 6307
B
750
850
E
F
G
H
850
60
51
153
675
735
900
60
51
153
725
50162-0750
835
1000
60
51
153
825
50162-0800
885
1050
60
51
153
875
50162-0900
985
1150
60
51
153
975
21.9
34.3
50162-1000
1085
1250
60
51
153
1075
24.1
37.3
50162-1050
1135
1300
60
51
153
1125
24.5
38.4
50162-1200
1285
1450
60
51
153
1275
27.2
42.5
50162-1350
1485
1650
60
51
153
1425
30.4
47.6
A
B
50162-0600
685
50162-0650
2 - 48
1535
1635
1835
2035
C
248
248
1700
1800
2000
2200
D
830
930
60
BEARING SIZE 6204
27.2
44.8
CODE NUMBER
29.6
50.9
12163-0900
MASS Kgs
12163-1000
R.P. TOTAL
12163-1050
16.5
26.0
12163-1200
17.1
27.1
12163-1350
19.2
30.1
12163-1400
19.8
31.2
CODE NUMBER
MASS Kgs
R.P.
10161-1200
B
F
10161-1050
2 - 40
A
11.2
1000
11.9
1050
13.1
1150
13.8
1250
15.0
1300
16.3
1450
18.2
1650
20.2
1700
60
6.5
SERIES 11
ROLL DIAMETER 114
CODE NUMBER
BEARING SIZE 6308
E
10.0
Note: 60“RP” is an abbreviation for Rotating
Parts.
45162-0800
885 11
1050
Note:
SERIES 45
B
4.1
MANUFACTURERS OF HIGH QUALITY CONVEYOR
EQUIPMENT
60
SERIES 45
ROLL4.7
DIAMETER 152 DISC
38
691
MASS Kgs
ROLLR.P.
DIAMETER
178
TOTAL
A
19
ROLL DIAMETER 102
A
CODE NUMBER
SERIES 55
F
SERIES 59
05161-0600
1000
60
05161-0650
1050
60
05161-0750
1150
60
05161-0800
1250
60
05161-0900
1300
60
05161-1000
1450
60
05161-1050
1650
60
05161-1200
1700
60
“RP” is an abbreviation for
Note:
1800
60
Note:
695
BEARING SIZE 6205
E
60
60
60
E
60
60
51
51
51
51
F
32
32
153
MASS
204
R.P.
204
6.2
204
7.1
Kgs
TOTAL
43.3
46.2
PAGE 10
SERIES 35
CODE NUMBER
ROLL DIAMETER 152
A
B
C
BEARING SIZE 6306
D
E
1000
260
1080
60
46
14.0
62.4
35163-0800
902
1050
260
1130
60
46
14.8
64.2
260
1230
60
46
16.2
69.3
35163-1000
1102
1250
260
1330
60
46
17.7
73.2
35163-1050
1152
1300
260
1380
60
46
18.4
75.1
35163-1200
1302
1450
267
1530
60
46
20.6
82.0
35163-1350
1502
1650
289
1730
60
46
23.5
105.7
35163-1400
1552
1700
289
1780
60
46
24.2
108.1
35163-1500
1652
1800
310
1880
60
46
25.7
125.3
35163-1600
1852
2000
310
2080
60
46
28.6
138.7
35163-1800
2052
2200
330
2280
60
46
31.5
160.2
SERIES 25
CODE NUMBER
A
ROLL DIAMETER 127
A
B
C
05163-0500
D
595
B
846
1000
25163-0800
896
1050
25163-0900
996
1150
25163-1000
1096
1250
25163-1050
1146
1300
25163-1200
1296
1450
25163-1350
1496
1650
25163-1400
1546
1700
25163-1500
1646
1800
25163-1600
1846
2000
298
2080
25163-1800
2046
2200
318
2280
E
CODE NUMBER
A
B
30163-0750
849
1000
30163-0800
899
1050
30163-0900
999
1150
30163-1000
1099
1250
30163-1050
1149
1300
30163-1200
1299
1450
30163-1350
1499
1650
30163-1400
1549
1700
30163-1500
1649
1800
30163-1600
1849
2000
30163-1800
2049
2200
C
10163-0350
289
1780
60
59
28.6
112.5
108.6
40163-1500
1652
1800
310
1880
60
59
30.4
130.0
60
34
17.8
117.7
40163-1600
1852
2000
310
2080
60
59
33.8
143.9
60
34
19.7
140.4
40163-1800
2052
2200
330
2280
60
59
37.2
165.9
34
34
34
34
34
52.5
54.0
58.3
61.5
63.0
68.8
90.7
92.7
930
980
1080
1130
1230
1330
1380
1530
CODE NUMBER
60
40163-0750
40163-0800
40163-0900
40163-1000
40163-1050
40163-1200
40163-1350
40163-1400
441
B
C
BEARING SIZE 6305
E
600
10163-0400
491
650
248
1080
60
541
700
10163-0450
248
1130
60
10163-0500
591
750
248
1230
60
10163-0600
691
850
248
1330
60
741
900
10163-0650
248
1380
60
841
1000
10163-0750
255
1530
60
891
1050
10163-0800
277
1730
60
991
1150
10163-0900
277
1780
60
1091
1250
10163-1000
298
1880
60
1141
1300
10163-1050
298
2080
60
10163-1200
1291
1450
318
2280
60
Note:
F
46
46
46
46
46
46
46
46
46
46
46
MASS
248
R.P.
248
13.8
248
14.6
248
16.0
248
17.5
248
18.2
248
20.4
248
23.3
248
24.0
248
25.5
248
28.4
255
31.3
Kgs
TOTAL
57.6
CODE NUMBER
A
2 - 50
B
60
60
60
60
60
60
60
59.5
27
852
27
902
27
1002
27
1102
27
1152
27
1302
27
1502
27
1552
6.1
1000
6.5
1050
7.3
1150
7.7
1250
8.5
1300
9.3
1450
9.7
1650
10.9
1700
36.2
39.0
40.4
43.2
44.7
47.5
50.4
53.0
58.5
D
E
680
730
780
E
SERIES 45
CODE NUMBER
60
45163-0750
45163-0800
68.1
69.8
76.6
99.4
101.7
118.1
128.3
152.1
930
980
1080
1130
1230
1330
1380
1530
45163-1000
45163-1050
45163-1200
45163-1350
45163-1400
45163-1500
45163-1600
45163-1800
Note:
F
D
E
F
MASS Kgs
R.P.
TOTAL
260
1080
60
59
16.6
65.0
260
1130
60
59
17.5
68.2
260
1230
60
59
19.2
72.3
260
1330
60
59
20.9
76.5
260
1380
60
59
21.8
78.5
267
1530
60
59
24.3
87.6
289
1730
60
59
27.8
110.0
BEARING SIZE 6204
D
60
60
F
MASS Kgs
ROLL DIAMETER 152
A
19
R.P.
B
3.2
TOTAL
19
850
19
900
19
1000
19
1100
19
1150
19
1300
19
1500
19
1550
19
1650
19
1850
19
2050
3.5
1000
3.8
1050
4.1
1150
4.7
1250
5.0
1300
5.6
1450
5.9
1650
6.5
1700
7.2
1800
7.5
2000
8.4
2200
38.3
37.0
39.6
60
60
60
60
60
60
60
60
43.8
45.0
48.4
49.4
52.4
55.1
56.3
61.4
C
BEARING SIZE 6307
D
E
F
MASS Kgs
R.P.
TOTAL
260
1080
60
46
14.1
65.1
260
1130
60
46
14.8
67.0
60
46
16.3
71.0
260
1330
60
46
17.8
75.0
260
1380
60
46
18.5
77.0
267
1530
60
46
20.7
84.1
289
1730
60
46
23.6
105.9
46
24.3
110.8
46
25.8
128.1
SINGLE
ROLL
1780
60 PLAIN
P/A1880
RETURN TRAINER
60
289
310
310
2080
60
46
28.7
138.9
330
2280
60
46
31.6
163.9
ROLL DIAMETER 114
A
C
D
DATANUMBER
AT ANY TIME WITHOUT
PRIORB NOTICE.
RIGHT TO CHANGE CRITICAL CODE
NOMINAL ONLY.
CERTIFIED
ARE AVAILABLE
ON REQUEST.ROLL
DIMENSIONS
SHOWN ARE BEARING
SERIES
50
DIAMETER 152
SIZE
6306 DRAWINGS
C
C
SERIES 11
ROLL
60
B
5.4
27
830
40.8 EQUIPMENT
MANUFACTURERS
OF60HIGH QUALITY CONVEYOR
45163-0900
260
1230
64.3
SERIES 35
A
ROLL DIAMETER 102
A
D
BEARING SIZE 6306
16.0
SERIES 10
CODE NUMBER
MASS Kgs
ROLL
DIAMETER 178
R.P.
TOTAL
34
34
TOTAL
830
Note:
ROLL DIAMETER 152
F
SERIES 40
34
34
Kgs
E
MASS
248
R.P.
248
8.7
248
9.1
248
10.0
248
10.9
248
11.4
248
12.8
248
14.6
255
15.1
750
F
BEARING SIZE 6205
D
SERIES 30
Note:
C
BEARING SIZE 6305
05163-0600
695
850
248
1080
60
05163-0650
745
900
248
1130
60
05163-0750
845
1000
248
1230
60
05163-0800
895
1050
248
1330
60
05163-0900
995
1150
248
1380
60
05163-1000
1095
1250
255
1530
60
05163-1050
1145
1300
277
1730
60
05163-1200
1295
1450
277
1780
60
Note:
298
1880
60
25163-0750
Note:
ROLL DIAMETER 114
CODE NUMBER
TOTAL
852
Note:
SERIES 05
MASS Kgs
R.P.
35163-0750
35163-0900
1002 EQUIPMENT
1150
CONVEYOR
SINGLE ROLL PLAIN
P/A RETURN TRAINER
F
MASS Kgs
11163-0500
CODE NUMBER 750
594
R.P. TOTAL
11163-0600
694
BEARING SIZE 6204
E
F
DIAMETER 178
C
BEARING SIZE 6307
TOTAL
25
E
5.3
42.4
A 248
B 830
850
248
930
60
25
6.1
45.2
60
D
MASS Kgs
R.P.
F
MASS Kgs
R.P.
TOTAL
35163-0750
852
1000
260
1080
60
46
14.0
62.4
11163-0650
50163-0750
744
900
850 248
1000 980
260 60
1080 25
60
6.5
46.5
59
24.5
75.5
35163-0800
902
1050
260
1130
60
46
14.8
64.2
11163-0750
50163-0800
844
1000
900 248
10501080
260 60
1130 25
60
7.3
50.1
59
25.8
77.9
35163-0900
1002
1150
260
1230
60
46
16.2
69.3
11163-0800
50163-0900
894
1050
1000 248
11501130
260 60
1230 25
60
7.7
51.5
59
28.3
83.0
35163-1000
1102
1250
260
1330
60
46
17.7
73.2
11163-0900
50163-1000
994
1150
1100 248
12501230
260 60
1330 25
60
8.5
54.4
59
30.9
88.1
35163-1050
1152
1300
260
1380
60
46
18.4
75.1
11163-1000
50163-1050
1094
1250
1150 248
13001330
260 60
1380 25
60
9.3
57.2
59
32.2
90.7
35163-1200
1302
1450
267
1530
60
46
20.6
82.0
11163-1050
50163-1200
1144
1300
1300 248
14501380
267 60
1530 25
60
9.7
62.2
59
36.0
99.4
35163-1350
1502
1650
289
1730
60
46
23.5
105.7
11163-1200
50163-1350
1294
1450
1500 255
16501530
289 60
1730 25
60
10.9
65.4
59
41.1
125.7
35163-1400
1552
1700
289
1780
60
46
50163-1400
24.2
108.1
1550
1700
289
1780
60
59
42.4
128.8
35163-1500
1652
1800
310
1880
60
46
25.7
125.3
50163-1500
1650
1800
310
1880
60
59
44.9
147.2
35163-1600
1852
2000
310
2080
60
46
28.6
138.7
50163-1600
1850
2000
310
2080
60
59
50.0
160.2
35163-1800
2052
2200
330
2280
60
46
31.5
160.2
50163-1800
2050
2200
330
2280
60
59
55.1
187.3
Note:
Note:
SERIES 12
SERIES 40
CODE NUMBER
CODE NUMBER
ROLL DIAMETER 178
A
B
C
BEARING SIZE 6306
D
E
F
ROLL DIAMETER 127
A
B
C
BEARING SIZE 6204
D
E
F
MASS Kgs
R.P.
TOTAL
MASS Kgs
12163-0500
596
750
248
830
60
32
6.2
43.3
R.P. TOTAL
12163-0600
696
850
248
930
60
32
7.1
46.2
40163-0750
852
1000
260
1080
60
59
16.6
65.0
12163-0650
746
900
248
980
60
32
7.6
47.5
40163-0800
902
1050
260
1130
60
59
17.5
68.2
12163-0750
846
1000
248
1080
60
32
8.5
51.3
40163-0900
1002
1150
260
1230
60
59
19.2
72.3
12163-0800
896
1050
248
1130
60
32
9.0
52.8
40163-1000
1102
1250
260
1330
60
59
20.9
76.5
12163-0900
996
1150
248
1230
60
32
9.9
55.7
40163-1050
1152
1300
260
1380
60
59
21.8
78.5
12163-1000
1096
1250
248
1330
60
32
10.8
58.7
40163-1200
1302
1450
267
1530
60
59
24.3
87.6
12163-1050
1146
1300
248
1380
60
32
11.3
60.1
40163-1350
1502
1650
289
1730
60
59
27.8
110.0
12163-1200
1296
1450
255
1530
60
32
12.6
67.1
40163-1400
1552
1700
289
1780
60
59
28.6
112.5
12163-1350
1496
1650
277
1730
60
32
14.5
86.6
40163-1500
1652
1800
310
1880
60
59
30.4
130.0
12163-1400
1546
1700
277
1780
60
32
14.9
88.5
40163-1600
1852
2000
310
2080
60
59
33.8
143.9
40163-1800
2052
2200
330
2280
60
59
Note:
37.2
165.9
PAGE 11
SINGLE ROLL PLAIN
P/A RETURN TRAINER
SERIES 05
SERIES 54
CODE NUMBER
ROLL DIAMETER 114
CODE NUMBER
A
ROLL DIAMETER 152
A
B
C
05163-0500
D
595
B
E
852
1000
54163-0800
902
1050
54163-0900
1002
1150
54163-1000
1102
1250
54163-1050
1152
1300
54163-1200
1302
1450
54163-1350
1502
1650
54163-1400
1552
1700
54163-1500
1652
1800
54163-1600
1852
2000
310
2080
54163-1800
2052
2200
330
2280
SERIES 59
CODE NUMBER
60
CODE NUMBER
A
B
55163-1000
1102
1250
55163-1050
1152
1300
55163-1200
1302
1450
55163-1350
1502
1650
55163-1400
1552
1700
55163-1500
1652
1800
55163-1600
1852
2000
55163-1800
2052
2200
C
10163-0350
10163-0400
260
10163-0450
260
10163-0500
267
10163-0600
289
10163-0650
289
10163-0750
310
10163-0800
310
10163-0900
330
10163-1000
1330
1380
1530
1730
1780
1880
2080
2280
441
491
541
591
691
741
841
891
991
1091
39.0
E
F
MASS Kgs
1800
310
1880
60
59
45.1
153.4
60
46
29.0
142.4
59163-1600
1852
2000
310
2080
60
59
50.2
169.3
60
46
31.9
164.3
59163-1800
2052
2200
330
2280
60
59
55.2
194.0
46
46
46
73.0
77.1
79.2
86.5
108.6
111.0
1080
1130
1230
1330
1380
1530
59163-0750
59163-0800
59163-0900
59163-1000
59163-1050
59163-1200
59163-1350
59163-1400
B
C
60
60
60
60
60
60
60
60
BEARING SIZE 6309
E
60
60
60
60
60
60
60
60
600
650
700
750
850
900
1000
1050
1150
1250
F
46
46
46
46
46
46
46
46
MASS
248
R.P.
248
18.2
248
19.0
248
21.2
248
24.1
248
24.8
248
26.3
248
29.2
248
32.1
248
Kgs
TOTAL
81.4
83.6
36.2
40.4
43.2
44.7
47.5
50.4
53.0
58.5
114.2
116.9
134.6
148.4
170.9
TOTAL
260
1080
60
59
24.7
77.2
260
1130
60
59
26.0
79.7
260
1230
60
59
28.6
85.0
260
1330
60
59
31.1
90.3
260
1380
60
59
32.4
92.9
267
1530
60
59
36.2
104.0
289
1730
60
59
41.3
128.7
289
1780
60
59
42.5
134.6
680
730
780
E
SERIES 60
CODE NUMBER
60
F
MASS Kgs
ROLL DIAMETER 178
TOTAL
R.P.
B
3.2
A
19
37.0
19
3.5
1102
1250
19
3.8
60163-1050
1152
1300
60
19
4.1
60163-1200
1302
1450
60
19
4.7
60163-1350
1502
1650
60
19
5.0
60163-1400
1552
1700
60
19
5.6
60163-1500
1652
1800
60
19
5.9
60163-1600
1852
2000
60
19
6.5
60163-1800
2052
2200
60
19
7.2
60
19
7.5
60163-1000
60
38.3
60
39.6
C
BEARING SIZE 6309
D
E
930
980
1080
1130
1230
1330
1141
1300
248
1380
10163-1200
1291
1450
255
1530
60
19
43.8
45.0
48.4
49.4
52.4
55.1
MASS Kgs
R.P.
TOTAL
94.5
1330
60
59
31.4
260
1380
60
59
32.6
97.3
60
59
36.5
106.7
289
1730
60
59
41.6
131.7
289
1780
60
59
42.8
134.9
310
1880
60
59
45.4
153.7
310
2080
60
59
50.5
169.7
59
55.3
200.8
SINGLE
ROLL60 PLAIN
2280
P/A RETURN TRAINER
330
56.3
8.4
F
260
830
40.8 EQUIPMENT
MANUFACTURERS
OF HIGH QUALITY CONVEYOR
267
1530
91.4
R.P.
BEARING SIZE 6204
D
61.4
SERIES 11
2 - 50
6.1
1000
6.5
1050
7.3
1150
7.7
1250
8.5
1300
9.3
1450
9.7
1650
10.9
1700
BEARING SIZE 6308
D
1652
46
68.8
980
10163-1050
Note:
27
852
27
902
27
1002
27
1102
27
1152
27
1302
27
1502
27
1552
C
59163-1500
46
66.8
930
ROLL DIAMETER 102
D
TOTAL
A
27
131.3
A
CODE NUMBER
R.P.
B
5.4
26.0
SERIES 10
ROLL DIAMETER 152
MASS Kgs
ROLL DIAMETER 178
46
46
TOTAL
830
Note:
SERIES 55
F
46
46
Kgs
E
MASS
248
R.P.
248
14.4
248
15.1
248
16.6
248
18.0
248
18.7
248
20.9
248
23.9
255
24.6
750
F
BEARING SIZE 6205
D
BEARING SIZE 6308
05163-0600
695
850
260
1080
60
05163-0650
745
900
260
1130
60
05163-0750
845
1000
260
1230
60
05163-0800
895
1050
260
1330
60
05163-0900
995
1150
260
1380
60
05163-1000
1095
1250
267
1530
60
05163-1050
1145
1300
289
1730
60
05163-1200
1295
1450
289
1780
60
Note:
310
1880
60
54163-0750
C
ROLL DIAMETER 114
A
C
DATANUMBER
AT ANY TIME WITHOUT
PRIORB NOTICE.
RIGHT TO CHANGE CRITICAL CODE
BEARING SIZE 6204
D
E
F
MASS Kgs
R.P.
TOTAL
11163-0500
594
750
248
830
60
25
5.3
42.4
11163-0600
694
850
248
930
60
25
6.1
45.2
11163-0650
744
900
248
980
60
25
6.5
46.5
11163-0750
844
1000
248
1080
60
25
7.3
50.1
11163-0800
894
1050
248
1130
60
25
7.7
51.5
11163-0900
994
1150
248
1230
60
25
8.5
54.4
11163-1000
1094
1250
248
1330
60
25
9.3
57.2
11163-1050
1144
1300
248
1380
60
25
9.7
62.2
11163-1200
1294
1450
255
1530
60
25
10.9
65.4
Note:
SERIES 12
CODE NUMBER
ROLL DIAMETER 127
A
B
C
BEARING SIZE 6204
D
E
F
MASS Kgs
R.P.
TOTAL
12163-0500
596
750
248
830
60
32
6.2
43.3
12163-0600
696
850
248
930
60
32
7.1
46.2
12163-0650
746
900
248
980
60
32
7.6
47.5
12163-0750
846
1000
248
1080
60
32
8.5
51.3
12163-0800
896
1050
248
1130
60
32
9.0
52.8
12163-0900
996
1150
248
1230
60
32
9.9
55.7
12163-1000
1096
1250
248
1330
60
32
10.8
58.7
12163-1050
1146
1300
248
1380
60
32
11.3
60.1
12163-1200
1296
1450
255
1530
60
32
12.6
67.1
12163-1350
1496
1650
277
1730
60
32
14.5
86.6
12163-1400
1546
1700
277
1780
60
32
14.9
88.5
Note:
PAGE 12
TWO ROLL PLAIN
INLINE VEE
RETURN
SERIES 05
ROLL DIAMETER 114
CODE NUMBER
SERIES 25
SERIES
25
CODE NUMBER
CODE NUMBER
A
A
ROLL DIAMETER 127
05169-0600-00
ROLL
5° DIAMETER 127
10°
B
A
B
C
5°
D
F
C
25169-1200-00
648
1450
C
51
D
1332
F
215
C
42
25169-1200-00
25169-1350-00
648
724
1450
1650
51
49
1332
1483
215
231
42
37
25169-1350-00
25169-1400-00
724
741
1650
1700
49
48
1483
1517
231
233
25169-1400-00
25169-1500-00
741
792
1700
1800
48
48
1517
1619
25169-1500-00
25169-1600-00
792
842
1800
2000
48
44
1619
1718
25169-1600-00
25169-1800-00
842
939
2000
2200
44
44
25169-1800-00
25169-2000-00
939
1044
2200
2400
25169-2000-00
25169-2200-00
1044
1144
25169-2200-00
25169-2400-00
25169-2400-00
25169-2500-00
B
05169-0650-00
729
280
60
7.0
21.1
35
858
243
25
834
294
60
7.8
23.0
34
895
248
23
870
300
60
8.2
23.7
41.8
202
34
45169-1800-00
998
257
23
943
971
2200
314
69
60
1934
9.0
418
1000
44
876
195
1274
437
354
1050
4360
13.6
914
33.4
197
1421
489
388
1150
4360
15.0
1017
B
C
1457
308
05169-0900-00
1308
283
31
24
37
36
1457
308
05169-1000-00
1491
312
24
21
1421
542
1454
388
1250
394
60
4460
15.0
1123
15.4
41.8
206
42.6
35
45169-1800-00
45169-2000-00
1102
265
24
943
1048
1073
2200
2400
327
69
69
60
233
248
36
36
1491
312
05169-1050-00
21
21
1454
562
394
1300
4360
15.4
1163
42.6
209
48.4
34
45169-2000-00
1142
270
22
45169-2200-00
1048
1112
1148
2400
334
2600
248
265
36
27
05169-1200-00
1591
332
1690
358
647
1552
1450
420
4460
1332
16.4
215
48.4
35
1309
283
24
45169-2200-00
1276
1148
354
2600
2800
1718
1912
265
274
27
26
05169-1350-00
1690
358
21
7
1881
376
7
5
723
1649
1836
1650
454
4260
1483
17.2
231
60.8
31
1459
1423
44
44
1912
2121
274
301
26
27
1881
2088
376
411
5
6
740
1836
2039
1700
41
1517
233
29
1492
312
15
1246
1307
44
44
2121
2320
301
309
27
27
2088
411
6
5
1800
41
1619
248
29
1593
332
2900
3000
2400
2600
791
1307
1346
1144
1244
2600
2800
44
44
2320
2519
309
318
27
26
2285
429
5
4
2232
841
553
2000
3760
22.8
1718
90.8
265
20
1691
358
1244
1303
2800
2900
44
44
2519
2637
318
342
26
28
446
4
2425
938
580
2200
3760
24.6
1912
97.2
274
19
45169-3000-00
1882
376
-1
1591
332
05169-1400-00
05169-1500-00
2285
429
05169-1600-00
2482
446
05169-1800-00
2482
2598
Note:
F
D
1274
1552
1649
2039
2232
2425
A
49
40
30169-1600-00
30169-1800-00
845
942
2000
2200
56
56
1719
1912
265
274
40
39
30169-1800-00
30169-2000-00
942
1047
2200
2400
56
56
1912
2121
274
301
30169-2000-00
30169-2200-00
1047
1147
2400
2600
56
56
2121
2320
30169-2200-00
30169-2400-00
1147
1247
2600
2800
56
56
30169-2400-00
30169-2500-00
1247
1306
2800
2900
56
57
3000
3400
69
35169-2800-00
Note:
Rotating Pa69
“RP” is an abbrevi1448
rts.
ation for 3200
1550
3400
69
B
SERIES 40
A
848
B
2000
82
40169-1800-00
945
2200
C
82
40169-1600-00
40169-2000-00
848
1050
2000
2400
82
83
40169-1800-00
40169-2200-00
945
1150
2200
2600
82
40169-2000-00
40169-2400-00
1050
1248
2400
2800
83
82
40169-2200-00
40169-2500-00
1150
1309
2600
2900
82
83
40169-2400-00
40169-2600-00
1248
1348
2800
3000
82
40169-2500-00
40169-2800-00
1309
1448
2900
3200
83
82
40169-2600-00
40169-3000-00
1348
1550
3000
3400
82
40169-2800-00
Note:
ation for 3200
Rotating Pa82
rts.
1550
3400
82
527
554
60
60
34.0
37.0
107.2
115.4
2240
2427
554
580
60
60
37.0
39.8
115.4
123.3
388
60
12.8
37.6
1456
394
60
13.0
318
342
38.4
52
54
2485
2605
446
475
30
32
2427
2545
580
613
60
60
39.8
41.6
123.3
153.6
14
1554
420
60
13.8
342
346
43.8
54
51
2605
2682
475
484
32
29
2545
2620
613
626
60
60
41.6
42.8
153.6
158.1
1
1651
454
60
14.6
56.2
346
354
51
51
2682
2879
484
502
29
28
2620
2813
626
653
60
60
42.8
45.6
158.1
167.7
1548
1839
3400
481
69
60
3140
16.2
363
61.2
354
51
51
2879
3080
502
519
28
28
2813
3010
653
680
60
60
45.6
48.6
167.7
182.4
1548
3400
69
3140
363
51
3080
519
28
3010
“00” – Insert required Troughing Angle: 5˚, 10˚, or 15˚.
680
60
48.6
182.4
308
17
45169-2400-00
45169-2500-00
45169-2500-00
45169-2600-00
45169-2600-00
45169-2800-00
45169-2800-00
2800
2900
1346
1446
69
70
70
69
3000
3200
1446
2538
2660
2660
2737
69
69
3200
2737
2937
69
2937
60
25.6
125.6
Note:
B
5°
BEARING SIZE 6204
10°
15°
E
C
D
F
C
D
F
C
D
F
MASS Kgs.
50
857SERIES
243
17
50
CODE248
NUMBER
894SERIES
15
27
26
15°
BEARING SIZE 6307
BEARING
E SIZE
MASS6307
Kgs.
C
15°
485
D
1150
F
35E
MASS Kgs.
1015
202
R.P
TOTAL
26
NUMBER15
997CODE257
971A
B
314
60C
5°
6.8
D
21.6
F
C
10°
D
F
C
15°
D
F
E
MASS
Kgs.
R.P
TOTAL
538
D
1250
F
36
1120
R.P
206
TOTAL
27
1101
265
15
50169-1600-00
1074
846
327
2000
60
C
82
7.6
D
1739
23.1
F
265
C
66
D
1693
F
358
C
46
D
1647
F
454
60
R.P
48.8
TOTAL
93.7
1456
308
43
36
23.8
265
1329
215
27
1308
283
16
1276
354
60
8.8
27.0
1693
1884
358
376
46
44
1647
1835
454
481
60
60
48.8
53.8
93.7
112.8
36
34
36
66
65
308
312
1450
274
1456
1490
643
1481
231
23
1458
308
9
1423
388
60
9.8
33.0
1884
2097
376
411
44
45
1835
2038
481
527
60
60
53.8
59.2
112.8
132.4
34
33
34
65
61
312
332
1650
274
301
1490
1590
719
1515
233
21
1491
312
6
394
60
10.0
33.8
411
429
45
44
2038
2231
527
554
60
60
59.2
64.2
132.4
142.6
27.6
1616
71.2
248
21
1591
1555
420
60
10.6
39.0
2288
2481
429
446
44
42
2231
2420
554
580
60
60
64.2
69.2
142.6
152.9
10169-1600-00
1880
376
20
18
3360
65
65
358
454
1800
309
318
1689
1645
787
837
1832
2000
481
2960
1716
30.4
265
80.0
12
50169-2200-00
50169-2400-00
332
6
50169-2400-00
50169-2500-00
1690
358
-8
1456
2097
2288
33
20
33
61
65
332
1700
301
309
1590
736
1307
1651
2900
454
83
60
2657
11.2
318
342
65
66
2481
2601
446
475
42
45
2420
2538
580
613
60
60
69.2
72.4
152.9
184.4
39
40
1880
376
10169-1800-00
2086
411
18
18
1832
934
2035
481
2200
526
2960
60
30.4
1909
33.4
80.0
274
96.9
12
50169-2500-00
1881
375
-9
50169-2600-00
1307
1839
1346
2900
481
3000
83
60
82
2657
12.4
2735
45
42
2538
2613
613
626
60
60
72.4
74.4
184.4
189.7
301
309
40
39
2086
Note:
2283
1346
1446
3000
3200
82
82
2735
2934
42
41
2613
2806
626
653
60
60
74.4
79.4
189.7
206.1
2320
2519
309
318
39
39
2283
2480
429
446
17
16
1446
1548
3200
3400
82
82
2934
3138
41
40
2806
3003
653
680
60
60
79.4
84.6
206.1
218.4
2519
2637
318
342
39
40
2480
2597
446
475
16
18
2422
580
60
39.2
112.0
50169-3000-00
1548
3400
82
3138
363
64
3075
519
40
3003
2536
613
60
41.0
140.8
Note: “RP” is an abbreviation for Rotating Parts. “00” – Insert required Troughing Angle: 5˚, 10˚, or 15˚.
2637
342
40
2597
475
18
2536
613 CHANGE
60 CRITICAL
41.0
140.8
Note: WITHOUT
“RP” is an PRIOR
abbreviatNOTICE.
ion for Rotating Parts. “00” – Insert required Troughing Angle: 5˚, 10˚, or 15˚.
DATA AT ANY TIME
RIGHT TO
“00” – Insert 2required
- 58 Troughing Angle: 5˚, 10˚, or 15˚.
680
60
84.6
218.4
10169-1050-00
1307
283
10169-1200-00
10169-1350-00
10169-1400-00
1689
358
10169-1500-00
1270
354
60
21.8
43.0
558
3560
1160
209
26
1140
270 CONVEYOR
14
1112
334
60
7.8
MANUFACTURERS
QUALITY
EQUIPMENT
1270 1300
354
21.8 OF
43.0HIGH
50169-1600-00
846
2000
82
1739
50169-1800-00
943
2200
82
1932
1417
388
60
24.0
50.8
1417
1450
1450
1548
1548
1645
388
394
394
420
420
454
60
60
24.0
24.6
60
60
24.6
26.0
60
26.0
60
27.6
411is an abbrev
18 iat2035
526 Part
60
“RP”
ion for Rotating
s.
429
17
2228
553
60
2228
2422
553
580
50.8
51.8
51.8
58.0
58.0
71.2
50169-1800-00
50169-2000-00
50169-2000-00
50169-2200-00
943
1048
1048
1148
36.4
39.2
104.4
112.0
CODE NUMBER
15°
F
E
A
B
MASS Kgs.
5°
C
R.P 6306
TOTAL
BEARING SIZE
C
D
F
11169-0600-00
5°
10°
15°
1743
265
53
1699
358
34
1656
454
11169-0650-00
F
D
F
C
D
F
C
D
1936
274
52
1890
376
32
1843
481
11169-0750-00
1743
265
1699
358
34
1656
454
2146
301
53
2097
411
33
2046
527
11169-0800-00
1936
274
52
1890
376
1843
481
2345
309
53
2294
429
32
2239
554
11169-0900-00
2146
301
53
2097
411
33
2046
527
2540
318
52
2487
446
30
2429
580
11169-1000-00
2345
309
53
2294
429
32
2239
554
2662
342
54
2607
475
33
2547
613
11169-1050-00
2540
318
2487
446
30
2429
580
2739
346
52
2684
484
29
2622
626
11169-1200-00
2662
342
54
2607
475
33
2547
613
2939
354
51
2881
502
28
2815
653
11169-1350-00
2739
346
52
2684
484
29
2622
626
3142
363
51
3082
519
28
3012
680
11169-1400-00
2939
354required
51Troughing
2881 Angle:
502
653
5˚, 10˚,28
or 15˚. 2815
“00” – Insert
11169-1500-00
3142
363
51
3082
519
28
3012
680
11169-1600-00
11169-1800-00
E
60
60
60
60
60
60
60
60
60
60
60
341
363
417
436
488
541
561
646
722
739
790
840
937
850
42
MASS Kgs.
28.0
67.7
900
42
R.P
TOTAL
30.8
86.8
1000
42
28.0
67.7
33.8
103.8
1050
41
30.8
86.8
36.8
111.6
1150
41
33.8
103.8
39.6
119.3
1250
42
36.8
111.6
41.4
153.2
1300
41
39.6
119.3
42.6
157.7
1450
42
41.4
153.2
45.4
167.3
1650
40
42.6
157.7
48.4
177.2
1700
39
45.4
167.3
39
1800
48.4
177.2
2000
35
2200
35
D
724
767
875
913
1016
1122
1162
1331
1483
1517
1618
1718
1911
82
82
2800
CODE NUMBER
15°
F
E
A
B
MASS Kgs.
BEARING SIZE 6306
C
D
F
12169-0600-00
5°
10°
15°
1741
265
66
1695
358
46
1649
454
12169-0650-00
D
F
C
D
F
C
D
F
1934
274
65
1886
376
45
1837
481
12169-0750-00
1741
265
1695
358
46
1649
454
2143
301
66
2093
411
45
2039
527
12169-0800-00
1934
274
1886
376
1837
481
2343
309
65
2290
429
45
2233
554
12169-0900-00
2143
301
66
2093
411
45
2039
527
2538
318
65
2483
446
43
2422
580
12169-1000-00
2343
309
65
2290
429
2233
554
2659
342
67
2603
475
45
2540
613
12169-1050-00
2538
318
65
2483
446
43
2422
580
2737
346
64
2680
484
42
2615
626
12169-1200-00
2659
342
67
2603
475
45
2540
613
2936
354
64
2877
502
41
2808
653
12169-1350-00
2737
346
2680
484
42
2615
626
3140
363
64
3077
519
41
3005
680
12169-1400-00
2936
354required
64Troughing
2877 Angle:
502
653
“00” – Insert
5˚, 10˚,41
or 15˚. 2808
12169-1500-00
3140
363
64
3077
519
41
3005
680
12169-1600-00
12169-1800-00
Note:
E
60
60
60
60
60
60
60
60
60
60
60
343
365
419
438
490
543
563
648
724
741
792
842
939
2200
41
2536
51.0
TWO
ROLL PLAIN
342
66
2601
475
57.4
346
64
2678
484
INLINE
VEE
346
64
2678
484
354
64
2875
502
RETURN
354
363
64
64
2875
3075
502
519
BEARING
SIZE152
6204
ROLL
DIAMETER
A
15°
B
SERIES 54
E
5°
ROLL DIAMETER 152
BEARING SIZE 6308
E
MASS Kgs.
F
R.P 6308
TOTAL
BEARING
SIZE
454
E
60
MASS Kgs.
28.6
76.5
F
481
60
R.P
31.4
TOTAL
93.8
454
527
60
28.6
34.6
76.5
111.4
481
554
60
31.4
37.4
93.8
119.8
527
580
60
34.6
40.4
111.4
128.1
554
613
60
37.4
42.0
119.8
158.6
580
626
60
40.4
43.2
128.1
163.1
613
653
60
42.0
46.2
158.6
172.9
626
680
60
43.2
49.2
163.1
183.2
653
60
46.2
172.9
680
60
49.2
183.2
5°
C
R.P
TOTAL
850
48
MASS Kgs.
33.2
72.9
900
48
R.P
TOTAL
36.4
92.6
1000
48
33.2
72.9
40.0
110.0
1050
48
36.4
92.6
43.4
118.4
1150
48
40.0
110.0
46.8
130.3
1250
48
43.4
118.4
49.0
160.8
1300
48
46.8
130.3
50.2
165.5
1450
49
49.0
160.8
53.8
175.5
1650
47
50.2
165.5
57.2
186.0
1700
46
53.8
175.5
1800
46
57.2
186.0
2000
42
2341
2536
82
SERIES 12
ROLL DIAMETER
SERIES 55127
BEARING SIZE 6306
10°
2141
2341
MASS Kgs.
10°
15°
D
F
C
D
F
R.P
TOTAL
C
D
F
C
D
F
C
D
189
33
708
230
24
687
273
60
6.6
19.0
CODE NUMBER
A
B
5°
10°
15°
54169-1600-00
848
2000
69
1743
265
53
1699
358
34
1656
191
33
751
235
23
730
280
60
7.0
19.7
C
D
F
C
D
F
C
D
54169-1800-00
945
2200
69
1936
274
52
1890
376
32
1843
195
33
858
243
23
834
294
60
7.8
21.4
54169-1600-00
848
2000
69
1743
265
1699
358
34
1656
54169-2000-00
1050
2400
70
2146
301
53
2097
411
33
2046
197
32
895
248
21
871
300
60
8.2
22.1
54169-1800-00
945
2200
1936
274
52
1890
376
1843
54169-2200-00
1150
2600
69
2345
309
53
2294
429
32
2239
202
32
998
257
21
971
314
60
9.0
23.8
54169-2000-00
1050
2400
70
2146
301
53
2097
411
33
2046
54169-2400-00
1248
2800
69
2540
318
52
2487
446
30
2429
206
33
1102
265
22
1073
327
60
9.8
25.5
54169-2200-00
1150
2600
69
2345
309
53
2294
429
32
2239
54169-2500-00
1309
2900
70
2662
342
54
2607
475
33
2547
209
32
1141
270
20
1112
334
60
10.2
26.2
54169-2400-00
1248
2800
2540
318
2487
446
30
2429
54169-2600-00
1348
3000
69
2739
346
52
2684
484
29
2622
215
33
1309
283
22
1276
354
60
11.4
29.6
54169-2500-00
1309
2900
70
2662
342
54
2607
475
33
2547
54169-2800-00
1448
3200
69
2939
354
51
2881
502
28
2815
231
29
1458
308
15
1423
388
60
12.6
36.0
54169-2600-00
1348
3000
2739
346
52
2684
484
29
2622
54169-3000-00
1550
3400
69
3142
363
51
3082
519
28
3012
233
28
1491
312
13
1456
394
60
13.0
36.8
54169-2800-00
354required
51Troughing
2881 Angle:
502
Note:
Rotating Pa69
5˚, 10˚,28
or 15˚. 2815
rts. 2939
“00” – Insert
ation for 3200
28
1592
332
13
1554
420
60
13.8
42.2
248
54169-3000-00
1550
3400
69
3142
363
51
3082
519
28
3012
19
1691
358
-1
1651
454
60
14.6
56.0
265
1882
376
-3
1838
481
60
16.0
61.2
274
18
CODE NUMBER
F
C
10°
1932
2141
82
82
2600
2800
1246
50169-2800-00
50169-3000-00
82
82
2400
2600
1148
1246
96.9
50169-2600-00
50169-2800-00
“033.4
0” – Insert
required Troughing
Angle: 5˚, 10˚, or 15˚.
36.4
104.4
60
60
2200
2400
SERIES 11
ROLL DIAMETER
SERIES 54114
BEARING SIZE 6306
10°
D DIAMETER
F
C
D
ROLL
178
CODE NUMBER
40169-1600-00
2044
2240
31
30
318
C
43
5°
C
32
31
429
446
45169-3000-00
1000
36 SIZE
873 6305
195
BEARING
433
1050
35E SIZE
911
197
15° BEARING
MASS6305
Kgs.
ROLL DIAMETER 178
A
411
429
2292
2485
125.6
Note:
“025.6
0” – Insert
required Troughing
Angle:“RP”
5˚, 1is
0˚,an
orabbrev
15˚. iation for Rotating Parts.
414
Note:
SERIES 40
2095
2292
52
52
2538
283
D DIAMETER
F
C
D
ROLL
152
1348
1550
53
52
31.0
309
69
TOTAL
73.1
1307
5°
35169-2600-00
35169-3000-00
301
28.2
309
11.6
2343
ROLL DIAMETER 102
A
ROLL DIAMETER 152
70
69
2144
10.2
2343
60
69
1246
18.1
248
265
2900
3200
69
60
69
45169-2400-00
B
300
1620
1719
1309
1448
90.0
107.2
294
61
56
35169-2500-00
35169-2800-00
31.0
34.0
871A
1800
2000
69
60
60
834
795
845
2800
3000
481
527
17.4
30169-1500-00
30169-1600-00
1248
1348
1842
2044
5.4
49
49
35169-2400-00
35169-2600-00
32
32
178
60 ROLL
6.0 DIAMETER
19.6
178
5° DIAMETER
10°
60 ROLL
6.2
20.3
233
248
69
70
376
411
60
1518
1620
2600
2900
1888
2095
280
61
61
1150
1309
52
53
730
1700
1800
35169-2200-00
35169-2500-00
274
301
27.3
16
744
795
70
69
73.1
90.0
1934
2144
9.8
235
30169-1400-00
30169-1500-00
2400
2800
28.2
31.0
751
50
49
1050
1248
60
60
27
231
233
35169-2000-00
35169-2400-00
454
481
191
1484
1518
69
1654
1842
765
61
61
2200
2600
34
32
35
1650
1700
945
1150
358
376
900
727
744
35169-1800-00
35169-2200-00
1697
1888
360
30169-1350-00
30169-1400-00
69
70
53
52
1741
10169-0650-00
55
50
2000
2400
613
97.2
265
69
TOTAL
215
231
848
1050
24.6
274
25.6
2000
5.0
1333
1484
35169-1600-00
35169-2000-00
60
90.8
MASS
Kgs.
R.P
TOTAL
R.P
28.2
R.P
63
61
C
69
22.8
E
60
60
1450
1650
69
60
84.3
F
F
454
273
651
727
2200
21.0
15°
D
D
1654
687
30169-1200-00
30169-1350-00
B
2000
60
66.4
84.3
C
C
34
17
10169-1000-00
D
F
945
19.0
21.0
F
F
358
230
10°
10169-0900-00
D
F
A
848
60
60
66.4
10°
D
D
1697
707
C
35169-1800-00
19.0
C
C
53
27
C
55
CODE NUMBER
35169-1600-00
580
60
60.8
BEARING SIZE 6307
BEARING
E SIZE
MASS6307
Kgs.
F
D
1741
189
F
C
553
17.2
15°
F
265
846
5°
D
C
C
69
722
F
215
SERIES 35
526
16.4
60
45169-1600-00
B
2000
36
5°
D
B
481
526
60
33.4
A
846
850
D
1333
A
481
13.6
CODE NUMBER
45169-1600-00
338
C
SERIES 35
454
60
TOTAL
10169-0600-00
C
63
420
SERIES 10
B
30169-2500-00
1306
2900
57
354
R.P
475is an abbrev
6
613 Part
60
“RP”
iat2539
ion for Rotating
s.
10169-0750-00
ROLL DIAMETER 152
ROLL
10169-0800-00
5° DIAMETER 152
10°
B
F
MASS Kgs.
R.P
TOTAL
A
C
31
1450
PAGE 13
273
25
F
A
Note:
687
235
F
1308
283
05169-0800-00
651
40169-3000-00
MASS Kgs.
R.P
TOTAL
ROLL
DIAMETER
152
60
6.6
20.2
ROLL
5° DIAMETER 152
10°
D
05169-0750-00
30169-1200-00
CODE NUMBER
E
F
D
752
35
CODE NUMBER
Note:
D
35
191
35169-3000-00
F
C
SERIES
45
708
230
26
SERIES
45
CODE NUMBER
C
768
E
15°
10°
D
CODE NUMBER
F
44
Note:
Note:
D
900
2637
342
28
2598
475
6
2539
CODE NUMBER
C
364
15°
D
BEARING SIZE 6205
10°
BEARING
SIZE
6305
342
850
44
724
189
15° BEARING
E SIZE
MASS6305
Kgs.
25169-2500-00
1303
2900
44
SERIES 30
SERIES
30
CODE NUMBER
5°
D
725
768
876
914
1017
1123
1163
1332
1484
1518
1619
1719
1912
SERIES 55
10°
BEARING
SIZE152
6204
ROLL
DIAMETER
MASS Kgs.
10°
15°
R.P
TOTAL
C
D
F
C
D
F
C
D
189
40
708
230
30
686
273
60
7.8
20.0
CODE NUMBER
A
B
5°
10°
15°
55169-1600-00
848
2000
69
1743
265
53
1699
358
34
1656
191
39
751
235
29
728
280
60
8.2
20.9
C
D
F
C
D
F
C
D
55169-1800-00
945
2200
69
1936
274
52
1890
376
32
1843
195
40
858
243
30
832
294
60
9.2
22.8
55169-1600-00
848
2000
69
1743
265
1699
358
34
1656
55169-2000-00
1050
2400
70
2146
301
53
2097
411
33
2046
197
39
895
248
28
869
300
60
9.6
23.5
55169-1800-00
945
2200
1936
274
52
1890
376
1843
55169-2200-00
1150
2600
69
2345
309
53
2294
429
32
2239
202
39
997
257
28
970
314
60
10.4
25.2
55169-2000-00
1050
2400
70
2146
301
53
2097
411
33
2046
55169-2400-00
1248
2800
69
2540
318
52
2487
446
30
2429
206
39
1102
265
28
1072
327
60
11.4
27.1
55169-2200-00
1150
2600
69
2345
309
53
2294
429
32
2239
55169-2500-00
1309
2900
70
2662
342
54
2607
475
33
2547
209
38
1141
270
27
1111
334
60
11.8
27.8
55169-2400-00
1248
2800
2540
318
2487
446
30
2429
55169-2600-00
1348
3000
69
2739
346
52
2684
484
29
2622
215
40
1309
283
29
1275
354
60
13.4
31.6
55169-2500-00
1309
2900
70
2662
342
54
2607
475
33
2547
55169-2800-00
1448
3200
69
2939
354
51
2881
502
28
2815
231
35
1458
308
22
1422
388
60
14.8
38.2
55169-2600-00
1348
3000
2739
346
52
2684
484
29
2622
55169-3000-00
1550
3400
69
3142
363
51
3082
519
28
3012
233
34
1492
312
19
1455
394
60
15.0
39.0
55169-2800-00
354required
51Troughing
2881 Angle:
502
Note:
ation for 3200
Rotating Pa69
rts. 2939
“00” – Insert
5˚, 10˚,28
or 15˚. 2815
248
34
1592
332
19
1553
420
60
16.0
46.0
55169-3000-00
1550
3400
69
3142
363
51
3082
519
28
3012
265
25
1691
358
5
1650
454
60
17.0
58.4
274
24
1882
376
3
1837
481
60
18.8
63.8
CODE NUMBER
F
C
D
A
F
B
15°
C
D
5°
E
F
ROLL DIAMETER 152
2 - 59
BEARING SIZE 6309
E
MASS Kgs.
F
R.P 6309
TOTAL
BEARING
SIZE
454
E
60
MASS Kgs.
29.0
83.3
F
481
60
R.P
31.8
TOTAL
101.2
454
527
60
29.0
35.0
83.3
119.6
481
554
60
31.8
37.8
101.2
128.6
527
580
60
35.0
40.8
119.6
137.5
554
613
60
37.8
42.6
128.6
168.4
580
626
60
40.8
43.6
137.5
173.3
613
653
60
42.6
46.6
168.4
183.9
626
680
60
43.6
49.6
173.3
194.6
653
60
46.6
183.9
680
60
49.6
194.6
SERIES 59
ROLL DIAMETER 178
CODE NUMBER
A
B
5°
D
F
C
D
F
C
D
F
A
B
5°
C
D
F
C
1741
265
66
1695
358
46
1649
454
60
49.4
97.3
59169-1800-00
945
2200
82
1934
274
65
1886
376
45
1837
481
60
54.4
116.6
59169-2000-00 CONVEYOR
1050
2400 EQUIPMENT
83
2143
301
66
2093
411
45
2039
527
60
59.6
136.6
59169-2200-00
1150
2600
82
2343
309
65
2290
429
45
2233
554
60
64.8
147.0
59169-2400-00
1248
2800
82
2538
318
65
2483
446
43
2422
580
60
69.8
161.7
59169-2500-00
1309
2900
83
2659
342
67
2603
475
45
2540
613
60
72.8
193.8
59169-2600-00
1348
3000
82
2737
346
64
2680
484
42
2615
626
60
74.8
199.3
59169-2800-00
1448
3200
82
2936
354
64
2877
502
41
2808
653
60
80.0
211.7
59169-3000-00
1550
3400
82
3140
363
64
3077
519
41
3005
680
60
85.0
230.0
ROLL DIAMETER 114
B
5°
F
C
D
F
850
44
724
189
35
708
230
26
687
273
60
900
44
768
191
35
SERIES
60
752
235
25
729
280
60
195
35
858
243
25
834
294
60
7.8
23.0
197
34
895
248
23
870
300
60
8.2
23.7
C
D
F
C
D
F
418
1000
44
876
437
1050
43
914
1695
358
MASS Kgs.
D
05169-0750-00
D
E
C
364
C
15°
F
05169-0650-00
F
BEARING SIZE 6205
10°
D
342
15°
C
05169-0600-00
D
TOTAL
82
A
10°
R.P
2000
SERIES 05
CODE NUMBER
MASS Kgs.
848
Note:
ROLL DIAMETER 178
E
59169-1600-00
TWO ROLL PLAIN
INLINE VEE
RETURN
SERIES 59
15°
C
CODE NUMBER
BEARING SIZE 6308
10°
BEARING SIZE 6308
F
E
MASS Kgs.
R.P
TOTAL
49.4
CODE NUMBER
A
B
R.P
TOTAL
6.6
20.2
ROLL
DIAMETER
178
7.0
21.1
5°
C
D
BEARING SIZE 6309
10°
F
15°
E
MASS Kgs.
R.P
TOTAL
59169-1600-00
848
2000
82
1741
265
66
05169-0900-00
46
489
1649
1150
43
1017
202
97.3
34
60169-1600-00
998
257
23
848
971
2000
314
6082
1741
9.0
265
25.6
66
1695
358
46
1649
454
60
49.8
103.9
59169-1800-00
945
2200
82
1934
274
65
1886
376
05169-1000-00
45
1837
542
481
1250
4460
54.4
1123
116.6
206
35
1102
265
24
60169-1800-00
1073
945
327
2200
6082
9.8
1934
27.3
274
65
1886
376
45
1837
481
60
54.8
124.0
59169-2000-00
1050
2400
83
2143
301
66
05169-1050-00
2093
411
45
562
2039
1300
527
4360
1163
59.6
209
136.6
34
1142
270
22
60169-2000-00
1112
1050
334
2400
6083
10.2
2143
28.2
301
66
2093
411
45
2039
527
60
60.0
144.6
59169-2200-00
1150
2600
82
2343
309
65
05169-1200-00
2290
429
45
647
2233
1450
554
4460
1332
64.8
215
147.0
35
1309
283
24
1276
354
60
11.6
31.0
65
2290
429
45
2233
554
60
65.2
155.8
59169-2400-00
1248
2800
82
2538
318
65
05169-1350-00
2483
446
43
723
1650
42
1483
69.8
231
31
1459
308
17
1423
388
60
12.8
37.6
2422
580
60
70.2
167.1
342
67
2603
475
45
72.8
193.8
60
5°
13.8
43.8
346
64
C
64
50
64
49
484
F
502
358
519
376
42
C
41
29
41
27
60
E
60
3200
1150
3400
1250
2540
15°
2615
D
2808
1619
3005
1806
613
1448
490
1550
543
2603
10°
2680
D
2877
1661
3077
1852
45
484
B
420
475
2680
A
1554
67
64
C
64
37
64
38
CODE 332
NUMBER14
1593
342
346
F
354
202
363
206
29
59169-2800-00
15170-0900-00
59169-3000-00
15170-1000-00
2659
5°
2737
D
2936
977
3140
1083
60
43
83
394
446
2900
B
3000
1456
2483
1309
A
1348
1492
65
59169-2500-00
CODE NUMBER
59169-2600-00
29
318
SERIES 15
05169-0800-00
ROLL DIAMETER 127
05169-1400-00
82
C
82
48
82
49
10°
05169-1500-00
2422
740
2540
15°
791
454
580
60
60
161.7
BEARING
1700
41 SIZE
1517 6205
233
613
1800
60
41E
MASS Kgs.
1619
248
42
2615
626
60
2000
37
841
C
D
F
41
2808
653
60
938
3760
28
930 2200
314
519
41
3005
680
60
“RP”
ion for Rotating
s.
265is an abbrev
28 iat1032
327 Part
60
74.8
60169-2200-00
60169-2400-00
1150
2600
1248
SERIES
45
312
15
60169-2500-00
82
2800
1309
82
2900
199.3
60169-2600-00
1348
265
20
1691
358
1
1651
TOTAL
211.7
60169-2800-00
1448
1882
376
-1
1839
274
19
30.6
45170-1600-00
831
85.0
230.0
60169-3000-00
1550
“014.8
0” – Insert
required Troughing
Angle: 5˚, 10˚, or 15˚. 928
32.3
45170-1800-00
2343
2538
ROLL
152 DISC
13.0 DIAMETER
38.4
83
3000
309
2659
82
2737
05169-1600-00
D
F
1718
R.P
454
60
C
14.6
D
56.2
F
05169-1800-00
957
257
1912
14.2
3200
481
2000
82
60
68
2936
16.2
1704
354
61.2
265
3400
2200
82
67
3140
1898
363
274
2877
3077
Note:
1062
502
80.0
BEARING SIZE 6307
626
F
653
454
680
481
60
60
60
60
73.2
199.2
MASS Kgs.
75.2
204.9
R.P
TOTAL
80.4
217.7
31.6
76.5
85.6
230.6
35.2
94.2
15170-1050-00
563
1300
48
1123
209
37
1101
270
27
1071
334
60
15.2
33.0
Note: “RP” is an abbrev1033
iation for2400
Rotating Pa
“00” – Insert
45170-2000-00
68rts. 2107
301 required
49 Troughing
2059 Angle:
4115˚, 10˚,28or 15˚.2009
527
60
39.0
112.2
15170-1200-00
648
1450
49
1292
215
38
1268
29
354
60
17.2
36.6
45170-2200-00
1133
2600
68
2306
309
49
2256
429
27
2204
554
60
41.2
119.6
15170-1350-00
724
1650
47
1443
231
34
SERIES 10
1235
1418
308
22
CODE NUMBER
1382
A
B388
60
18.2
5°
43.0
45170-2400-00
10°
1231
15°
2800
68
E
2501 Kgs.
318
MASS
49
2449
446
25
2391
580
60
44.8
128.3
15170-1400-00
741
1700
46
1477
233
33
1452
19
1415
394
C60
18.4
D
47.1
F
C
C
1292
D
2900
F
68
2623
R.P
342
TOTAL
50
2569
475
28
2509
613
60
46.2
158.2
15170-1500-00
792
1800
42
1579
248
33
10169-0600-00
1552
332
19
338
1513
850
420
3660
722
20.0
189
50.0
27
707
230
17
45170-2600-00
687
1331
273
3000
60
67
5.0
2700
17.4
346
48
2646
484
24
2584
626
60
48.4
163.7
15170-1600-00
842
2000
42
1678
265
24
10169-0650-00
1650
358
5
360
1610
900
454
3560
765
20.8
191
62.2
27
751
235
16
45170-2800-00
730
1431
280
3200
60
67
5.4
2900
18.1
354
48
2843
502
23
2778
653
60
50.6
172.7
15170-1800-00
939
2200
42
1872
274
23
1842
1000
36
873
195
27
857
243
17
834
294
60
6.0
19.6
26
894
248
15
871
300
60
6.2
20.3
48
3044
519
23
2975
680
60
54.2
188.0
A
B
15°
485
1150
35E
MASS Kgs.
1015
202
26
997
257
15
971
314
60
6.8
21.6
C
538
D
1250
F
36
1120
R.P
206
TOTAL
27
1101
265
15
1074
327
60
7.6
23.1
46
558
1300
35
1160
209
26
1140
270
14
1112
334
60
7.8
23.8
643
1450
36
1329
215
27
1308
283
16
1276
354
60
8.8
27.0
719
1650
34
1481
231
23
1458
308
9
1423
388
60
9.8
33.0
736
1700
33
1515
233
21
1491
312
6
1456
394
60
10.0
33.8
787
1800
33
1616
248
21
1591
332
6
1555
420
60
10.6
39.0
167.1
12
1690
1651
454
60
SERIES 60
CODE NUMBER
312
10169-0750-00
376
ROLL DIAMETER 178
10169-0800-00
5°
C
D
4
10°
10169-0900-00
F
C
10169-1000-00
D
F
10169-1050-00
60169-1600-00
848
2000
82
1741
265
66
60169-1800-00
945
2200
82
1934
274
65
60169-2000-00
1050
2400
83
2143
301
66
60169-2200-00
1150
2600
82
2343
309
65
60169-2400-00
1248
2800
82
2538
318
60169-2500-00
CODE NUMBER
60169-2600-00
1309
A
1348
2900
B
3000
83
2659
5°
2737
D
2936
1293
3140
1444
SERIES 30
283
1695
358
10169-1200-00
1886
376
45
2093
411
45
2290
429
45
65
2483
446
43
342
67
2603
475
10169-1800-00
346
F
354
215
363
231
64
C
64
51
64
47
10169-1350-00
10169-1400-00
10169-1500-00
10169-1600-00
ROLL DIAMETER 152
DISC
414
1797
433
481
ROLL DIAMETER 102
60
22.8
68.0
BEARING
1050
35 SIZE
911 6309
197
D45170-2500-00
F
45170-3000-00
BEARING SIZE 6204
1533
3400
68
3103
363
MANUFACTURERS
1649
454
60
49.8 OF
103.9HIGH QUALITY CONVEYOR EQUIPMENT
1837
2039
2233
2422
837
481
527
554
580
60
54.8
60
124.0
60.0
60
144.6
65.2
60
155.8
70.2
2000
29
1716
265
BEARING
SIZE
6307
358
-8
50
SERIES
11.2
51.0
TWO
ROLL178
PLAIN
DISC
ROLL
DIAMETER
60
12.4
57.4
5°
10°
INLINE VEE
C
D
F RETURN
C
D
F
45
2540 2200
613
73.2 274
199.2 12
934
2960
1909
1881
375
-9
1839
481
MASS Kgs.
15°
E
CODE NUMBER
A
B
484is an abbrev
42 iat2615
626 Part
60
204.9
“RP”
ion for Rotating
s. “075.2
0” – Insert
required Troughing Angle: 5˚, 10˚, or 15˚.
TOTAL
F
R.P
F
C
D
60169-2800-00
1448
3200
502
41
2808
653
60
80.4
217.7
1232
354
60
24.6
37.6
30170-1200-00
633
1450
283
38
50170-1600-00
831
2000
81
1702
60169-3000-00
1550
3400
519
41
3005
680
60
85.6
230.6
60OF PRODUCT
27.6
45.2
30170-1350-00
709
1650
308
31
1379
388
50170-1800-00
928
2200
80
1895
IN
THE INTEREST
DEVELOPMENT,
PROK GROUP RESERVES
THE
Note: “RP” is an abbreviation for Rotating Parts. “00” – Insert required Troughing Angle: 5˚, 10˚, or 15˚. RIGHT TO CHANGE CRITICAL DATA AT ANY TIME WITHOUT PRIOR NOTICE.
60
28.0
46.0
30170-1400-00
726
1700
59
1478
233
45
1450
312
29
1411
394
50170-2000-00
1033
2400
81
2104
60
30.4
52.6
30170-1500-00
777
1800
59
1580
248 2 - 5845
1551
332
28
1510
420
50170-2200-00
1133
2600
81
2304
82
C
82
61
82
59
10°
2680
Note:
D
2877
1267
3077
1417
30170-1600-00
827
2000
54
1679
265
36
1649
358
15
30170-1800-00
924
2200
54
1872
274
35
1840
376
13
1607
454
SERIES
11
1794
481
30170-2000-00
1029
2400
54
2081
301
36
2047
412
CODE NUMBER
527
13
1997
30170-2200-00
1129
2600
54
2280
309
36
2244
429
12
30170-2400-00
1229
2800
54
2479
318
36
2441
447
30170-2500-00
1288
2900
55
2597
341
37
2557
475
SERIES 45
CODE NUMBER
553
2190
11169-0600-00
580
11
2383
11169-0650-00
613
13
2497
11169-0750-00
A
B
5°
60
31.6
60
60
35.2
A
60
60
60
64.8
38.8
363
417
44.8
5°
86.9
C
92.6
850
99.4
42
900
42
46.0
127.0
1000
42
60
36.4
81.3
274
62
1847
376
40
1799
481
60
40.6
99.6
301
62
2054
411
40
2002
527
60
44.8
118.2
309
62
2251
429
39
2195
554
60
47.2
125.6
318
61
2444
446
38
2384
580
60
51.2
134.9
40
2502
613
60
52.6
164.8
37
2578
626
60
55.4
170.7
36
2771
653
60
57.8
179.7
35
2968
680
60
62.0
195.8
BEARING
SIZE
6204475
342
63
2564
2620
15°
E
50170-2600-00
D
F
C
50170-2800-00
724
189
33
50170-3000-00
767
191
33
MASS Kgs.
1331
3000
80
2698
346
61
2641
484
F
R.P
TOTAL
D
F
C
D
1431
3200
80
2897
354
61
2838
502
708
230
24
687
273
60
6.6
19.0
1533
3400
81
3101
363
61
3039
519
751
235
23
730
280
60
7.0
19.7
875
195
33
858
243
23
834
294
60
7.8
21.4
913
197
32
895
248
21
871
300
60
8.2
22.1
41
1016
202
32
998
257
21
971
314
60
9.0
23.8
11169-1000-00
541
1250
42
1122
206
33
1102
265
22
1073
327
60
9.8
25.5
1162
209
32
1141
270
20
1112
334
60
10.2
26.2
15°
11169-1200-00
F
C
D
F
C
D
F
11169-1350-00
E
646
MASS Kgs.
1450
42
1331
215
33
1309
283
22
1276
354
60
11.4
29.6
722
R.P
TOTAL
1650
40
1483
231
29
1458
308
15
1423
388
60
12.6
36.0
739
31.6
76.5
1700
39
1517
233
28
1491
312
13
1456
394
60
13.0
36.8
790
35.2
94.2
1800
39
1618
248
28
1592
332
13
1554
420
60
13.8
42.2
840
39.0
112.2
35
2000
1718
265
19
1691
358
-1
1651
454
60
14.6
56.0
937
41.2
119.6
35
2200
1911
274
18
1882
376
-3
1838
481
60
16.0
61.2
68
1704
265
50
1661
358
29
1619
454
11169-1400-00
60
45170-1800-00
928
2200
67
1898
274
49
1852
376
27
1806
481
11169-1500-00
60
45170-2000-00
1033
2400
68
2107
301
49
2059
411
28
2009
527
11169-1600-00
60
45170-2200-00
1133
2600
68
2306
309
49
2256
429
27
2204
554
11169-1800-00
60
45170-2400-00
1231
2800
68
2501
318
49
2449
446
25
45170-2500-00
1292
2900
68
2623
342
50
2569
475
2391
580
60
44.8
128.3
28
2509
613
60
46.2
158.2
45170-2600-00
1331
3000
67
2700
346
48
2646
484
24
45170-2800-00
1431
3200
67
2900
354
48
2843
502
23
45170-3000-00
1533
3400
68
3103
363
48
3044
519
23 CODE
2975NUMBER
680
2584
626
2778
653
SERIES
12
60
48.4
163.7
60
50.6
172.7
60 A 54.2 B 188.0
5°
15°
E
D
F
C
D
F
C
D
F
R.P
TOTAL
343
850
48
725
189
40
708
230
30
686
273
60
7.8
20.0
12169-0650-00
365
900
48
768
191
39
751
235
29
728
280
60
8.2
20.9
12169-0750-00
419
1000
48
876
195
40
858
243
30
832
294
60
9.2
22.8
12169-0800-00
438
1050
48
914
197
39
895
248
28
869
300
60
9.6
23.5
12169-0900-00
490
1150
48
1017
202
39
997
257
28
970
314
60
10.4
25.2
12169-1000-00
543
1250
48
1123
206
39
1102
265
28
1072
327
60
11.4
27.1
1163
209
38
1141
270
27
1111
334
60
11.8
27.8
C
D
F
C
D
F
C
F
D
12169-1350-00
E
648
MASS Kgs.
1450
49
1332
215
40
1309
283
29
1275
354
60
13.4
31.6
724
TOTAL
R.P
1650
47
1484
231
35
1458
308
22
1422
388
60
14.8
38.2
741
36.4
81.3
1700
46
1518
233
34
1492
312
19
1455
394
60
15.0
39.0
792
40.6
99.6
1800
46
1619
248
34
1592
332
19
1553
420
60
16.0
46.0
842
44.8
118.2
2000
42
1719
265
25
1691
358
5
1650
454
60
17.0
58.4
939
47.2
125.6
2200
41
1912
274
24
1882
376
3
1837
481
60
18.8
63.8
50170-1600-00
831
2000
81
1702
265
62
1656
358
41
1612
454
12169-1400-00
60
50170-1800-00
928
2200
80
1895
274
62
1847
376
40
1799
481
12169-1500-00
60
50170-2000-00
1033
2400
81
2104
301
62
2054
411
40
2002
527
12169-1600-00
60
50170-2200-00
1133
2600
81
2304
309
62
2251
429
39
2195
554
12169-1800-00
60
50170-2400-00
1231
2800
81
2499
318
61
2444
446
38
50170-2500-00
1292
2900
81
2620
342
63
2564
475
60
51.2
134.9
2384
580
60
52.6
164.8
40
2502
613
50170-2600-00
1331
3000
80
2698
346
61
2641
484
37
2578
626
60
50170-2800-00
1431
3200
80
2897
354
61
2838
502
36
2771
653
60
50170-3000-00
1533
3400
81
3101
363
61
3039
519
35
2968
55.4
F
MASS Kgs.
12169-0600-00
15°
12169-1200-00
D
BEARING SIZE 6204
10°
C
BEARING 563
SIZE1300
630748
C
ROLL DIAMETER 127
12169-1050-00
10°
454
41
D
5°
1612
1150
C
B
41
1050
2000
A
81
TOTAL
358
488
831
CODE NUMBER
2900
10°
2499
R.P
1656
436
BEARING 561
SIZE1300
630741
81
MASS Kgs.
62
11169-0900-00
45170-1600-00
SERIES 50
2800
E
265
11169-0800-00
11169-1050-00
10°
1231
ROLL DIAMETER
1141292
50170-2500-00
71.0
B
41.2
341
50170-2400-00
BEARING SIZE 6307
15°
170.7
57.8
179.7
IN THE
INTEREST
OF PRODUCT DEVELOPMENT, PROK GROUP RESERVES THE
CHANGE CRITICAL DATA AT ANY TIME WITHOUT PRIOR NOTICE.
680
60 RIGHT
62.0 TO195.8
PAGE 14
2 - 59
SERIES 35
ROLL DIAMETER 152
CODE NUMBER
A
B
BEARING SIZE 6306
C
10°
SERIES
25
30
35
40
45
50
25
25
28
28
39
39
CRS
30
30
45
45
45
45
M10
M10
M12
M12
M16
M16
Bolt Size
MASS Kgs.
R.P
TOTAL
35178-1600-00
848
892
91
172
1904
1869
28.0
44.2
35178-1800-00
945
989
108
197
2095
2056
30.8
48.6
35178-2000-00
1050
1094
126
224
2302
2259
33.8
53.4
35178-2200-00
1150
1194
143
250
2499
2452
36.8
61.4
35178-2400-00
1248
1292
160
275
2692
2641
39.6
66.2
35178-2500-00
1309
1353
171
291
2812
2759
41.4
69.0
35178-2600-00
1348
1392
177
301
2889
2835
42.6
71.0
35178-2800-00
1448
1492
195
327
3086
3028
45.4
75.8
35178-3000-00
1550
1594
213
353
3287
3225
48.4WIDTH
85.6
SHACKLE
Shackle Width
D
Note:
15°
10°
15°
“00” – Insert required Troughing Angle: 10˚ or 15˚.
Note Consult your Prok representative for more details
SERIES 05
SERIES 25
CODE NUMBER
ROLL DIAMETER 127
A
B
ROLL DIAMETER 114
CODE NUMBER
A
BEARING SIZE 6305
C
D
B
SERIES 40
MASS Kgs.
05178-0600-00
CODE NUMBER
342
10°
15°
10°
15°
R.P
TOTAL
05178-0650-00
364
A
648
669
62
123
1430
1405
13.6
20.9
05178-0750-00
40178-1600-00
418
848
25178-1350-00
724
745
75
142
1580
1552
40178-1800-00
437
945
25178-1400-00
741
762
78
147
1614
1585
40178-2000-00
489
1050
25178-1500-00
792
813
87
160
1714
1683
40178-2200-00
542
1150
25178-1600-00
842
863
95
173
1813
1780
40178-2400-00
562
1248
25178-1800-00
939
960
112
198
2004
1967
40178-2500-00
647
1309
25178-2000-00
1044
1065
130
225
2210
2169
40178-2600-00
723
1348
25178-2200-00
1144
1165
148
251
2407
2362
40178-2800-00
740
1448
25178-2400-00
1244
1265
165
277
2604
2555
40178-3000-00
791
1550
25178-2500-00
1303
1324
175
292
2720
2669
15.0
24.7
05178-0800-00
15.4
25.1
05178-0900-00
16.4
26.7
05178-1000-00
17.2
28.1
05178-1050-00
19.0
31.1
05178-1200-00
21.0
36.7
05178-1350-00
22.8
40.1
05178-1400-00
24.6
43.1
05178-1500-00
25.6
45.1
05178-1600-00
Note:
938
CODE NUMBER
A
B
A
C
D
10°
15°
10°
15°
651
669
49
110
30178-1350-00
727
745
62
129
1580
1552
30178-1400-00
744
762
65
134
1614
1585
30178-1500-00
795
813
74
147
1714
1683
30178-1600-00
845
863
83
160
1813
1780
30178-1800-00
942
960
100
185
2004
1967
30178-2000-00
1047
1065
118
212
2210
2169
30178-2200-00
1147
1165
135
238
2407
2362
30178-2400-00
1247
1265
152
264
2604
2555
30178-2500-00
1306
1324
163
279
2720
2669
CODE NUMBER
CODE NUMBER
338
MASS Kgs.
10178-0600-00
R.P
TOTAL
10178-0650-00
21.8
29.1
10178-0750-00
24.0
33.7
10178-0800-00
24.6
34.3
10178-0900-00
26.0
36.3
10178-1000-00
27.6
38.5
10178-1050-00
30.4
42.3
10178-1200-00
33.4
49.3
10178-1350-00
36.4
53.5
10178-1400-00
39.2
57.9
10178-1500-00
41.0
60.3
10178-1600-00
SERIES 11
CODE NUMBER
CODE NUMBER
A
B
10°
15°
35178-1600-00
848
892
91
172
35178-1800-00
945
989
108
197
35178-2000-00
1050
1094
126
224
35178-2200-00
1150
1194
143
250
35178-2400-00
1248
1292
160
275
35178-2500-00
1309
1353
171
291
35178-2600-00
1348
1392
177
301
35178-2800-00
1448
1492
195
327
35178-3000-00
1550
1594
213
353
Note:
B
B
363
1869
2056
2259
2452
2641
2759
2835
3028
3225
15°
40178-1600-00
848
892
77
158
40178-1800-00
945
989
94
183
40178-2000-00
1050
1094
113
210
40178-2200-00
1150
1194
130
236
40178-2400-00
1248
1292
147
262
40178-2500-00
1309
1353
158
277
40178-2600-00
1348
1392
164
288
40178-2800-00
1448
1492
182
313
40178-3000-00
1550
1594
199
340
Note:
33.2
12.9
49.4
459
989
32
94
75
183
1017
2095
999
2056
8.2
36.4
13.3
54.4
511
1094
41
113
88
210
1119
2302
1100
2259
9.0
40.0
14.7
59.6
564
1194
50
130
102
236
1224
2499
1202
2452
9.8
43.4
15.9
68.2
584
1292
54
147
107
262
1263
2692
1241
2641
10.2
46.8
16.5
73.4
669
1353
68
158
129
277
1430
2812
1405
2759
11.6
49.0
18.5
76.6
745
1392
81
164
149
288
1580
2889
1552
2835
12.8
50.2
20.5
78.8
762
1492
84
182
153
313
1614
3086
1585
3028
13.0
53.8
20.9
84.0
813
1594
93
199
167
340
1714
3287
1683
3225
13.8
57.2
22.3
94.4
1780
14.6
23.5
1967
16.2
25.9
119
B
205
B
B
364
728
728
745
745
796
796
846
846
943
943
1048
1048
1148
1148
1246
1246
1307
1307
1346
1346
1446
1446
1548
1548
440
459
511
564
22
58
10°
10°
63
57
57
77
70
70
82
73
73
96
82
82
109
91
91
115
108
108
137
126
126
156
143
143
161
160
160
174
171
171
187
178
178
212
195
195
213
213
26
698
698
35
774
774
39
791
791
48
842
842
57
892
892
60
989
989
75
1094
1094
88
1194
1194
91
1292
1292
100
1353
1353
109
1392
1392
126
1492
1492
1594
1594
669
745
762
813
863
960
BEARING SIZE 6204
15°
E
R.P
TOTAL
6.6
19.0
834
294
B
B 60
7.8
913
197
32
895
248
21
871
50178-1200-00
652
1016 50178-1200-00
202
32
998
257 65221
971
50178-1350-00
728
1122 50178-1350-00
206
33
1102
265 72822
1073
50178-1400-00
745
1162 50178-1400-00
209
32
1141
270 74520
1112
50178-1500-00
796
1331 50178-1500-00
215
33
1309
283 79622
1276
50178-1600-00
846
1483 50178-1600-00
231
29
1458
308 84615
1423
50178-1800-00
943
1517 50178-1800-00
233
28
1491
312 94313
1456
50178-2000-00
1048
28
1592
332 104813
1554
1618 50178-2000-00
248
50178-2200-00
1148
1718 50178-2200-00
265
19
1691
358 1148-1
1651
50178-2400-00
1246
1882
376 1246-3
1838
1911 50178-2400-00
274
18
50178-2500-00
1307
50178-2500-00
1307
50178-2600-00
1346
50178-2600-00
1346
50178-2800-00
1446
50178-2800-00
1446
50178-3000-00
1548
50178-3000-00
1548
300
C
D
F
C
189
33
708
230
24
767
SERIES
50
SERIES
191
33 50 751
235
875
858
243
23
A
A 23
CODE NUMBER
CODE
195 NUMBER
33
5°
10°
60
698
314 698 60
774
327 774 60
791
334 791 60
842
354 842 60
892
388 892 60
989
394 989 60
1094
420 109460
1194
454 119460
1292
481 129260
1353
1353
1392
1392
1492
1492
1594
1594
8.2
9.0
9.8
10.2
11.4
12.6
13.0
13.8
14.6
16.0
C
21.4 C
10°
10°
22.1
44
44
23.8
57
57
25.5
60
60
26.2
69
69
29.6
78
78
36.0
94
94
36.8
113
113
42.2
130
130
56.0
147
147
61.2
158
158
164
164
182
182
199
199
BEARING SIZE 6204
15°
E
F
C
D
F
R.P
TOTAL
48
725
189
40
708
230
30
686
273
60
7.8
20.0
365
900
48
768
191
39
751
235
29
12169-0650-00
D
MASS Kgs.
419
1000
48
876
195
40
858
243
30
12169-0750-00
10°
15°
R.P
TOTAL
438
1050
48
914
197
39
895
248
28
12169-0800-00
1904
1869
33.2
49.4
490
1150
48
1017
202
39
997
257
28
12169-0900-00
2095
2056
36.4
54.4
543
1250
48
1123
206
39
1102
265
28
12169-1000-00
2302
2259
40.0
59.6
563
1300
48
1163
209
38
1141
270
27
12169-1050-00
2499
2452
43.4
68.2
648
1450
49
1332
215
40
1309
283
29
12169-1200-00
2692
2641
46.8
73.4
724
1650
47
1484
231
35
1458
308
22
12169-1350-00
2812
2759
49.0
76.6
741
1700
46
1518
233
34
1492
312
19
12169-1400-00
2889
2835
50.2
78.8
792
1800
46
1619
248
34
1592
332
19
12169-1500-00
3086
3028
53.8
84.0
842
2000
42
1719
265
25
1691
358
5
12169-1600-00
3287
3225
57.2
94.4
41
1912VARIOUS
274 METHODS
24
1882
376
3
12169-1800-00
REFER TO PAGE 19 939
OF THIS2200
CATALOGUE
FOR
OF ATTACHMENT
728
280
60
8.2
20.9
832
294
60
9.2
22.8
869
300
60
9.6
23.5
970
314
60
10.4
25.2
1072
327
60
11.4
27.1
1111
334
60
11.8
27.8
1275
354
60
13.4
31.6
1422
388
60
14.8
38.2
1455
394
60
15.0
39.0
1553
420
60
16.0
46.0
1650
454
60
17.0
58.4
1837
481
60
18.8
15°
15°
108
108
128
128
132
132
145
145
158
158
183
183
211
211
236
236
262
262
278
278
288
288
314
314
340
340
63.8
MASS Kgs.
BEARING
SIZE 6307
BEARING
R.P SIZE
TOTAL6307
15°
824
10°
10°
866
1522
1522
971
1672
1672
1008
1705
1705
1108
1806
1806
1210
1904
1904
1249
2095
2095
1413
2302
2302
1560
2499
2499
1593
2692
2692
1691
2812
2812
1788
2889
2889
1975
3086
3086
3287
3287
D
D
5.0
15°
15°
5.4
1494
1494
6.0
1641
1641
6.2
1674
1674
6.8
1772
1772
7.6
1869
1869
7.8
2056
2056
8.8
2259
2259
9.8
2452
2452
10.0
2641
2641
10.6
2759
2759
11.2
2835
2835
12.4
3028
3028
3225
3225
MASS Kgs.
MASS Kgs.
8.2
R.P
TOTAL
R.P
TOTAL
8.6
22.4
38.2
22.4
38.2
9.6
24.6
41.8
24.6
41.8
10.0
25.2
42.6
25.2
42.6
10.8
26.6
45.0
26.6
45.0
11.8
28.2
47.6
28.2
47.6
12.2
31.0
52.2
31.0
52.2
13.8
34.0
57.2
34.0
57.2
16.0
37.0
62.2
37.0
62.2
16.4
39.8
66.8
39.8
66.8
17.4
41.6
74.0
41.6
74.0
18.4
42.8
76.0
42.8
76.0
22.2
45.6
81.2
45.6
81.2
48.6
86.4
48.6
86.4
.
BEARING
BEARING SIZE
SIZE 6307
6307
MASS Kgs.
D
840
15°
15°
883
122
122
989
141
141
1027
146
146
1129
159
159
1233
172
172
1273
197
197
1440
224
224
1590
250
250
1623
275
275
1724
291
291
1823
301
301
2013
327
327
353
353
ROLL
DIAMETER
178
ROLL
DIAMETER
730
280
60
7.0 178
19.7
C
850
10°
MASS Kgs.
60
F
D
C
C
TWO ROLL PLAIN
INLINE VEE
RETURN
584
10°
BEARING SIZE 6204
F
343
2004
C
ROLL
152
ROLL DIAMETER
DIAMETER
152
10°
15°
D
Note:
PAGE 15
1869
7.8
ROLL DIAMETER 127
A
BEARING SIZE 6306
C
1904
962
C
12169-0600-00
10°
158
979
273
900
42
MASS Kgs.
417
1000
42
R.P
TOTAL
436
1050
41
28.0
44.2
488
1150
41
30.8
48.6
541
1250
42
33.8
53.4
561
1300
41
36.8
61.4
646
1450
42
39.6
66.2
722
1650
40
41.4
69.0
739
1700
39
42.6
71.0
39
1800
790
45.4
75.8
2000
35
840
48.4
85.6
35
2200
937
11169-0650-00
D
11169-0750-00
10°
11169-0800-00
1904
11169-0900-00
2095
11169-1000-00
2302
11169-1050-00
2499
11169-1200-00
2692
11169-1350-00
2812
11169-1400-00
2889
11169-1500-00
3086
11169-1600-00
3287
11169-1800-00
CODE NUMBER
A
77
70
687
724
SERIES 12
CODE NUMBER
TOTAL
892
29
F
42
850
ROLL DIAMETER 178
R.P
11.5
440
D
D
341
15°
5°
C
11169-0600-00
Note:
SERIES 40
15°
7.0
386
ROLL DIAMETER 114
A
BEARING SIZE 6306
C
A
A
360
45178-1200-00
45178-1200-00
414
45178-1350-00
45178-1350-00
433
45178-1400-00
45178-1400-00
485
45178-1500-00
45178-1500-00
538
45178-1600-00
45178-1600-00
558
45178-1800-00
45178-1800-00
643
45178-2000-00
45178-2000-00
719
45178-2200-00
45178-2200-00
736
45178-2400-00
45178-2400-00
787
45178-2500-00
45178-2500-00
837
45178-2600-00
45178-2600-00
934
45178-2800-00
45178-2800-00
45178-3000-00
45178-3000-00
10178-1800-00
ROLL DIAMETER 152
10°
858
MANUFACTURERS
OF HIGH QUALITY CONVEYOR 652
EQUIPMENT
1430
1405
652
30178-1200-00
SERIES 35
816
15°
873
“00” – Insert102
required Troughing
15˚.
179Angle: 10˚ or
1813
6.6
MASS Kgs.
10.9
830
10°
56
B
SERIES
SERIES 45
45
BEARING SIZE 6305
D
50
19
ROLL DIAMETER 102
CODE NUMBER
ROLL DIAMETER 152
C
MASS Kgs.
BEARING
R.P SIZE
TOTAL6306
15°
15
960
SERIES 10
SERIES 30
B
10°
386
“RP” 841
is an abbreviation for Rotating 863
Parts.
05178-1800-00
D
ROLL DIAMETER
178
10°
15°
364
25178-1200-00
BEARING SIZE 6205
C
2 - 59
10°
10°
1522
1522
1672
1672
1705
1705
1806
1806
1904
1904
2095
2095
2302
2302
2499
2499
2692
2692
2812
2812
2889
2889
3086
3086
3287
3287
D
D
15°
15°
1494
1494
1641
1641
1674
1674
1772
1772
1869
1869
2056
2056
2259
2259
2452
2452
2641
2641
2759
2759
2835
2835
3028
3028
3225
3225
MASS
MASS
R.P
R.P
39.0
39.0
42.8
42.8
43.6
43.6
46.2
46.2
48.8
48.8
53.8
53.8
59.2
59.2
64.2
64.2
69.2
69.2
72.4
72.4
74.2
74.2
79.4
79.4
84.6
84.6
Kgs.
Kgs.
TOTAL
TOTAL
54.6
54.6
60.0
60.0
61.2
61.2
64.8
64.8
68.2
68.2
75.0
75.0
82.4
82.4
89.4
89.4
100.2
100.2
104.8
104.8
107.6
107.6
115.0
115.0
122.4
122.4
SERIES 54
ROLL DIAMETER 152
CODE NUMBER
A
B
BEARING SIZE 6308
C
SERIES
54
59
34
34
CRS
Bolt Size
45
45
M16
M16
MASS Kgs.
15°
10°
15°
R.P
TOTAL
54178-1600-00
848
892
92
174
1918
1882
28.6
51.3
54178-1800-00
945
989
109
199
2109
2070
31.4
56.3
54178-2000-00
1050
1094
127
226
2316
2272
34.6
61.7
54178-2200-00
1150
1194
144
252
2513
2466
37.4
66.9
54178-2400-00
1248
1292
161
277
2706
2655
40.4
71.9
54178-2500-00
1309
1353
177
293
2826
2773
42.0
75.1
54178-2600-00
1348
1392
179
303
2903
2848
43.2
77.1
54178-2800-00
1448
1492
196
329
3100
3041
46.2
87.1
54178-3000-00
1550
1594
214
355
3301
3238
49.2WIDTH
92.7
SHACKLE
Shackle Width
D
10°
Note:
SERIES 05
SERIES 54
CODE NUMBER
ROLL DIAMETER 152
A
B
ROLL DIAMETER 114
CODE NUMBER
A
BEARING SIZE 6308
C
D
B
SERIES 59
MASS
Kgs.
05178-0600-00
CODE NUMBER
342
10°
15°
10°
15°
R.P
TOTAL
05178-0650-00
364
A
BEARING SIZE 6205
C
D
ROLL DIAMETER
178
10°
15°
MASS Kgs.
BEARING
R.P SIZE
TOTAL6308
10°
C
15°
364
B 15
830
816
6.6
MASS Kgs.
10.9
386
19
5610°
15°
873
10°
858
15°
7.0
50
D
R.P
11.5
TOTAL
54178-1600-00
848
892
92
174
1918
1882
28.6
51.3
05178-0750-00
59178-1600-00
418
848
440
89229
7079
160
979
1918
962
1882
7.8
49.4
12.9
72.1
54178-1800-00
945
989
109
199
2109
2070
31.4
56.3
05178-0800-00
59178-1800-00
437
945
459
98932
7596
185
1017
2109
999
2070
8.2
54.4
13.3
79.1
54178-2000-00
1050
1094
127
226
2316
2272
34.6
61.7
05178-0900-00
59178-2000-00
489
1050 511
212
1119
2316
1100
54178-2200-00
1150
1194
144
252
2513
2466
37.4
66.9
05178-1000-00
59178-2200-00
CODE NUMBER
542
1150
A 564
1194
B50
131
102
238
C 1224
2513
1202 D
2466
9.8
64.8
98.1
MASS Kgs.
15.9
54178-2400-00
1248
1292
161
277
2706
2655
40.4
71.9
05178-1050-00
59178-2400-00
562
1248 584
1292
54
148
10°
107
264
15°
1263
2706
10°
1241
2655
15°
10.2
69.8
R.P
16.5
105.7
TOTAL
54178-2500-00
1309
1353
177
293
2826
2773
42.0
75.1
05178-1200-00
59178-2500-00
55178-1600-00
647
1309
848 669
1353
892
68
164
92
129
279
174
1430
2826
1918
1405
2773
1882
11.6
72.8
29.0
18.5
114.9
58.3
54178-2600-00
1348
1392
179
303
2903
2848
43.2
77.1
05178-1350-00
59178-2600-00
55178-1800-00
723
1348
945 745
1392
989
81
166
109
149
289
199
1580
2903
2109
1552
2848
2070
12.8
74.8
31.8
20.5
118.1
63.9
54178-2800-00
1448
1492
196
329
3100
3041
46.2
87.1
05178-1400-00
59178-2800-00
55178-2000-00
740
1448
1050 762
1492
1094
84
183
127
153
315
226
1614
3100
2316
1585
3041
2272
13.0
79.8
35.0
20.9
126.1
70.1
54178-3000-00
1550
1594
214
355
3301
3238
49.2
92.7
05178-1500-00
59178-3000-00
55178-2200-00
791
1550
1150 813
1594
1194
93
201
144
167
342
252
1714
3301
2513
1683
3238
2466
13.8
85.0
37.8
22.3
134.3
75.9
05178-1600-00
55178-2400-00
1248 863
Note:
“RP”841
is an abbreviation for Rotating
Parts.
2706
1780
2655
14.6
40.8
23.5
81.5
2826
1967
2773
16.2
42.6
25.9
85.1
87.5
Note:
SERIES 55
05178-1800-00
SERIES
Shackle Width
CRS
Bolt Size
SERIES 59
CODE NUMBER
55
60
Note
Note
45
45
Note
Note
ROLL DIAMETER 178
A
SERIES 10
B
15°
D
10°
848
892
79
160
59178-1800-00
945
989
96
185
2109
212
2316
238
2513
SERIES 55
1094
114
ROLL DIAMETER
152
1050
59178-2200-00
CODE NUMBER
1150
A
1194
B
131
59178-2400-00
1248
1292
148
10°
264
15°
59178-2500-00
55178-1600-00
1309
848
1353
892
164
92
59178-2600-00
55178-1800-00
1348
945
1392
989
59178-2800-00
55178-2000-00
1448
1050
59178-3000-00
55178-2200-00
1550
1150
55178-2400-00
1248 Parts.
Note:
“RP” is an abbreviation for Rotating
55178-2600-00
1348
55178-2800-00
55178-3000-00
15°
205177
293
2004
1392
179
303
2903
2848
43.6
1448
1492
196
329
3100
3041
46.6
93.3
1550
1594
214
355
3301
3238
49.6
103.1
ROLL DIAMETER
102required Troughing Angle: 10˚ orBEARING
SIZE 6204
“00” – Insert
15˚.
A IDLER ACCESSORIES IN THIS
B
C METHODS OF ATTACHMENT.
D
REFER
CATALOGUE FOR VARIOUS
2070
R.P
TOTAL
338
364
22
58
840
824
5.0
8.2
R.P
TOTAL
10178-0650-00
360
386
26
63
883
866
5.4
8.6
10178-0750-00
414
440
35
77
989
971
6.0
9.6
54.4
79.1
10178-0800-00
433
459
39
82
1008
6.2
10.0
511
ROLL DIAMETER
178
48
96
1027
1129
1108
564
B57
109
C 1233
1210 D
7.6
MASS Kgs.
11.8
15°
1273
10°
1249
15°
7.8
R.P
12.2
TOTAL
160
1440
1918
1413
1882
8.8
49.8
13.8
78.9
185
1590
2109
1560
2070
9.8
54.8
16.0
86.7
2272 SIZE
59.6 6309
90.5
BEARING
10178-0900-00
SERIES
48560
2466
64.8
98.1
MASS Kgs.
10178-1000-00
2706
10°
2655
15°
69.8
105.7
R.P
TOTAL
10178-1050-00
558
584
279
174
2826
1918
2773
1882
72.8
114.9
29.0
58.3
10178-1200-00
60178-1600-00
643
848 669
166
109
289
199
2903
2109
2848
2070
74.8
118.1
31.8
63.9
10178-1350-00
60178-1800-00
719
945 745
1492
1094
183
127
315
226
3100
2316
3041
2272
79.8
126.1
35.0
70.1
10178-1400-00
60178-2000-00
736
1050 762
1594
1194
201
144
342
252
3301
2513
3238
2466
85.0
134.3
37.8
75.9
10178-1500-00
60178-2200-00
787
C
1292
“00” – Insert
required Troughing161
Angle: 10˚ or277
15˚.
D
MASS Kgs.
MASS
Kgs.
10178-0600-00
MANUFACTURERS
1918
1882
49.4 OF
72.1 HIGH QUALITY CONVEYOR EQUIPMENT
59178-1600-00
59178-2000-00
1353
119
BEARING SIZE 6308
C
10°
1309 960
Note:
2272
59.6 6309
90.5
BEARING
SIZE
9.0
14.7
1292
“00” – Insert
required Troughing
Angle: 10˚1813
or277
15˚.
102
179161
55178-2500-00
938
CODE NUMBER
1094
ROLL DIAMETER
152
41
88114
CODE NUMBER
538
A
10°
15°
10°
15°
10°
60
TWO
ROLL 115
PLAIN
892
75
13779
INLINE
VEE
989
88RETURN
15696
BEARING
SIZE
6.8
10.8 6309
1094
91
161114
212
1623
2316
1593
2272
10.0
60.0
16.4
95.1
1150 813
1194
100
174131
238
1724
2513
1691
2466
10.6
65.2
17.4
103.1
2706
2655
40.8
81.5
10178-1600-00
60178-2400-00
837
1248 863
1292
109
187148
264
1823
2706
1788
2655
11.2
70.2
18.4
111.1
55178-2500-00
1309
1353
177
293
2826
2773
42.6
85.1
10178-1800-00
60178-2500-00
934
1309 960
1353
126
212159
279
2013
2826
1975
2773
12.4
73.2
22.2
115.9
55178-2600-00
1348
1392
179
303
2903
2848
43.6
87.5
60178-2600-00
1348
1392
166
289
2903
2848
75.2
119.1
55178-2800-00
1448
1492
196
329
46.6
93.3
315
3100
3041
80.4
127.1
55178-3000-00
1550
1594
214
355
3100
SERIES
113041
342
3301
3238
85.6
139.1
Note:
CODE3301
NUMBER
3238
A 49.6 B 103.1
60178-2800-00
ROLL DIAMETER
114
5°
60178-3000-00
C
D
Note:F
1492 SIZE 6204
183
BEARING
1448
1550
10°
1594E
15°
D iation F
C Parts.
D
“RP”Cis an abbrev
for Rotating
201
MASS Kgs.
TOTAL
“00” –F Insert required R.P
Troughing
Angle: 10˚ or 15˚.
11169-0600-00
REFER IDLER ACCESSORIES IN THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT.
341
850
42
724
189 REFER
33 IDLER
708ACCESSORIES
230
24IN THIS687
273 FOR60VARIOUS
6.6 METHODS
19.0 OF ATTACHMENT.
CATALOGUE
11169-0650-00
363
900
42
767
191
33
751
235
23
730
280
60
7.0
19.7
11169-0750-00
417
1000
42
875
195
33
858
243
23
834
294
60
7.8
21.4
11169-0800-00
436
1050
41
913
197
32
895
248
21
871
300
60
8.2
22.1
11169-0900-00
488
1150
41
1016
202
32
998
257
21
971
314
60
9.0
23.8
11169-1000-00
541
1250
42
1122
206
33
1102
265
22
1073
327
60
9.8
25.5
1162
209
32
1141
270
20
1112
334
60
10.2
26.2
646 MASS
1450Kgs. 42
1331
215
33
1309
283
22
1276
354
60
11.4
29.6
SERIES 60
CODE NUMBER
ROLL DIAMETER 178
A
B
BEARING561
SIZE1300
630941
11169-1050-00
C
11169-1200-00D
10°
15°
10°
11169-1350-00
15° 722 R.P1650TOTAL40
1483
231
29
1458
308
15
1423
388
60
12.6
36.0
60178-1600-00
848
892
79
160
1918
11169-1400-00
1882 739 49.81700 78.939
1517
233
28
1491
312
13
1456
394
60
13.0
36.8
60178-1800-00
945
989
96
185
2109
11169-1500-00
2070 790 54.81800 86.739
1618
248
28
1592
332
13
1554
420
60
13.8
42.2
60178-2000-00
1050
1094
114
212
2316
11169-1600-00
2272 840 60.02000 95.135
1718
265
19
1691
358
-1
1651
454
60
14.6
56.0
60178-2200-00
1150
1194
131
238
2513
11169-1800-00
2466 937 65.22200 103.135
1911
274
18
1882
376
-3
1838
481
60
16.0
61.2
60178-2400-00
1248
1292
148
264
60178-2500-00
1309
1353
159
279
60178-2600-00
1348
1392
166
289
60178-2800-00
1448
1492
183
315
60178-3000-00
1550
1594
201
342
Note:
Note:
2706
2655
70.2
111.1
2826
2773
73.2
115.9
2848
75.2
119.1
3100
SERIES
123041
2903
80.4
127.1
CODE3301
NUMBER
3238
A 85.6 B 139.1
ROLL DIAMETER 127
5°
BEARING SIZE 6204
10°
15°
E
C
D
F
C
D
F
C
D
F
MASS Kgs.
R.P
TOTAL
12169-0600-00
REFER IDLER ACCESSORIES IN THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT.
343
850
48
725
189
40
708
230
30
686
273
60
7.8
20.0
12169-0650-00
365
900
48
768
191
39
751
235
29
728
280
60
8.2
20.9
12169-0750-00
419
1000
48
876
195
40
858
243
30
832
294
60
9.2
22.8
12169-0800-00
438
1050
48
914
197
39
895
248
28
869
300
60
9.6
23.5
12169-0900-00
490
1150
48
1017
202
39
997
257
28
970
314
60
10.4
25.2
12169-1000-00
543
1250
48
1123
206
39
1102
265
28
1072
327
60
11.4
27.1
12169-1050-00
563
1300
48
1163
209
38
1141
270
27
1111
334
60
11.8
27.8
12169-1200-00
648
1450
49
1332
215
40
1309
283
29
1275
354
60
13.4
31.6
12169-1350-00
724
1650
47
1484
231
35
1458
308
22
1422
388
60
14.8
38.2
12169-1400-00
741
1700
46
1518
233
34
1492
312
19
1455
394
60
15.0
39.0
12169-1500-00
792
1800
46
1619
248
34
1592
332
19
1553
420
60
16.0
46.0
12169-1600-00
842
2000
42
1719
265
25
1691
358
5
1650
454
60
17.0
58.4
41
1912VARIOUS
274 METHODS
24
1882
376
3
12169-1800-00
REFER TO PAGE 19 939
OF THIS2200
CATALOGUE
FOR
OF ATTACHMENT
1837
481
60
18.8
63.8
Note:
.
PAGE 16
2 - 59
SERIES
25
30
35
40
45
50
54
59
Shackle Width
25
25
28
28
34
34
39
39
CRS @ 35˚
30
30
45
45
45
45
45
45
CRS @ 45˚
35
45
45
45
50
50
50
50
M10
M10
M12
M12
M16
M16
M16
M16
Bolt Size
SERIES
25 your Prok representativeROLL
127
Note Consult
for more DIAMETER
details
CODE NUMBER
A
B
BEARING SIZE 6305
C
D
116
143
194
1005
954
317
B
354
65
124
152
205
1051
997
77
20°
87
59
95
65
113
77
131
87
133
95
149
113
156
131
178
133
142
30°
156
116
168
124
195
142
221
156
224
168
247
195
257
221
289
224
173
35°
189
143
203
152
233
173
263
189
266
203
293
233
305
263
341
266
231
45°
250
194
268
205
305
231
341
250
345
268
378
305
392
341
438
345
1157
20°
1235
1005
1307
1051
1459
1157
1609
1235
1627
1307
1762
1459
1820
1609
2004
1627
D
CODE NUMBER
A
B
45174-0750-00
284
45174-0800-00
45174-0750-00
889
1098
30°
1172
954
1240
997
1385
1098
1527
1172
1543
1240
1672
1385
1726
1527
1901
1543
1059
35°
1130
919
1196
961
1336
1059
1474
1130
1490
1196
1614
1336
1667
1474
1836
1490
979
45°
1044
851
1104
889
1232
979
1358
1044
1372
1104
1486
1232
1534
1358
1688
1372
10.8
MASS
11.7
R.P
12.6
10.5
13.2
10.8
14.7
11.7
16.2
12.6
16.2
13.2
17.7
14.7
18.0
16.2
19.8
16.2
Note:
20˚, 30˚,
35˚ or 1672
45˚.
25174-1500-00
543Rotating Parts.564“00” – Insert
149required
247Troughing
293 Angle:
378
1762
1614
1486
17.7
25174-1600-00
563
584
156
257
305
392
1820
1726
1667
1534
25174-1800-00
627
648
178
289
341
438
2004
1901
1836
1688
Note:
59
A
961
360
280
385
296
438
333
490
360
496
385
543
438
563
490
627
496
301
CODE NUMBER
SERIES
45
10.5
25174-1000-00
25174-0750-00
25174-1050-00
25174-0800-00
25174-1200-00
25174-0900-00
25174-1350-00
25174-1000-00
25174-1400-00
25174-1050-00
25174-1500-00
25174-1200-00
25174-1600-00
25174-1350-00
25174-1800-00
25174-1400-00
30°
SERIES 45
851
296
A
333
20°
16.0
919
25174-0800-00
CODE NUMBER
25174-0900-00
45°
TOTAL
R.P
280
35°
BEARING SIZE 6305
45°
SERIES 25
30°
MASS Kgs.
35°
25174-0750-00
20°
ROLL DIAMETER 127
381
301
406
317
459
354
511
381
517
406
564
459
584
511
648
517
SERIES 30
CODE NUMBER
C
B
D
20°
30°
330
63
20°
298
284
344
330
45174-0900-00
45174-0800-00
337
298
45174-1000-00
45174-0900-00
30°
35°
45°
R.P TOTAL
MASS Kgs.
127
30°
156
35°
213
45°
1136
20°
1079
30°
1042
35°
962
45°
17.4
R.P
30.3
TOTAL
67
63
134
127
164
156
223
213
1177
1136
1117
1079
1079
1042
996
962
18.0
17.4
31.5
30.3
383
344
81
67
153
134
187
164
251
223
1289
1177
1223
1117
1182
1079
1090
996
19.8
18.0
34.2
31.5
364
337
410
383
90
81
167
153
202
187
270
251
1367
1289
1297
1223
1253
1182
1155
1090
21.0
19.8
36.3
34.2
45174-1050-00
45174-1000-00
389
364
435
410
98
90
179
167
217
202
288
270
1439
1367
1365
1297
1319
1253
1216
1155
22.2
21.0
38.1
36.3
45174-1200-00
45174-1050-00
442
389
488
435
117
98
206
179
247
217
325
288
1592
1439
1510
1365
1459
1319
1344
1216
24.3
22.2
42.0
38.1
45174-1350-00
45174-1200-00
494
442
540
488
134
117
232
206
277
247
362
325
1741
1592
1652
1510
1596
1459
1469
1344
26.7
24.3
45.6
42.0
45174-1400-00
45174-1350-00
500
494
546
540
136
134
235
232
280
277
366
362
1758
1741
1669
1652
1612
1596
1484
1469
27.0
26.7
46.2
45.6
45174-1500-00
45174-1400-00
547
500
593
546
152
136
258
235
307
280
399
366
1894
1758
1797
1669
1736
1612
1597
1484
29.1
27.0
49.5
46.2
28.9
45174-1600-00
45174-1500-00
567
547
613
593
159
152
268
258
319
307
413
399
1951
1894
1852
1797
1788
1736
1645
1597
30.0
29.1
51.0
49.5
18.0
29.8
45174-1800-00
45174-1600-00
631
567
677
613
181
159
300
268
355
319
459
413
2135
1951
2026
1852
1957
1788
1800
1645
32.7
30.0
55.5
51.0
19.8
34.9
45174-2000-00
45174-1800-00
706
631
752
677
207
181
338
300
398
355
512
459
2352
2135
2232
2026
2155
1957
1981
1800
36.0
32.7
61.2
55.5
45174-2200-00
45174-2000-00
785
706
831
752
234
207
377
338
444
398
567
512
2579
2352
2447
2232
2364
2155
2172
1981
39.6
36.0
70.5
61.2
Note:
20˚, 30˚,
35˚ or 2447
45˚.
45174-2200-00
234required
377Troughing
444 Angle:
567
2579
2364
2172
39.6
70.5
Note:
MASS Kgs.
45°
R.P
TOTAL
SERIES 50
869
16.8
22.3
A
961
907
CODE NUMBER
A
B
1098
30°
1172
954
1240
997
1385
1098
1527
1172
1543
1240
1672
1385
1726
1527
1901
1543
1059
35°
1130
919
1196
961
1336
1059
1474
1130
1490
1196
1614
1336
1667
1474
1836
1490
997
45°
1062
869
1122
907
1250
997
1376
1062
1390
1122
1504
1250
1552
1376
1706
1390
17.4
MASS
18.9
R.P
20.1
16.8
21.3
17.4
23.7
18.9
25.8
20.1
26.1
21.3
28.2
23.7
29.1
25.8
31.8
26.1
CODE NUMBER
SERIES
50
50174-0750-00
284
50174-0800-00
50174-0750-00
Note:
20˚, 30˚,
35˚ or 1672
45˚.
30174-1500-00
137required
235Troughing
281 Angle:
370
1762
1614
1504
28.2
30174-0800-00
CODE NUMBER
30174-0900-00
299
A
336
30174-1000-00
30174-0750-00
30174-1050-00
30174-0800-00
30174-1200-00
30174-0900-00
30174-1350-00
30174-1000-00
30174-1400-00
30174-1050-00
30174-1500-00
30174-1200-00
30174-1600-00
30174-1350-00
30174-1800-00
30174-1400-00
363
283
388
299
441
336
493
363
499
388
546
441
566
493
630
499
SERIES 35
SERIES 35
30174-1600-00
CODE NUMBER
30174-1800-00
CODE NUMBER
566
A
630
A
20°
30°
35°
45°
20°
30°
301
46
104
130
186
1005
954
317
B
354
52
112
139
197
1051
997
64
20°
74
46
82
52
100
64
119
74
121
82
137
100
144
119
166
121
130
30°
144
104
156
112
183
130
209
144
212
156
235
183
245
209
277
212
160
35°
176
130
190
139
220
160
250
176
254
190
281
220
292
250
329
254
223
45°
242
186
260
197
297
223
333
242
337
260
370
297
384
333
430
337
1157
20°
1235
1005
1307
1051
1459
1157
1609
1235
1627
1307
1762
1459
1820
1609
2004
1627
ROLL DIAMETER 152
381
301
406
317
459
354
511
381
517
406
564
459
584
511
648
517
C
ROLL DIAMETER 152
584
144
245
292
ROLL
DIAMETER
B
C 152
648
B
166
20°
277
329
30° C 35°
BEARING SIZE 6305
D
23.2
Kgs.
25.3
TOTAL
26.8
22.3
29.8
23.2
33.1
25.3
36.1
26.8
36.4
29.8
41.5
33.1
42.7
36.1
46.9
36.4
41.5
BEARING SIZE 6306
1667
1552
29.1
42.7
BEARING
SIZE
D
MASS6306
Kgs.
384
1820
1726
430
45°
2004
20°
1901
1836
30° D 35°
1706
45°
31.8
46.9
MASS TOTAL
Kgs.
R.P
45°
953
R.P
17.1
TOTAL
26.6
C
D
35°
283
SERIES 30
D
MASS Kgs.
BEARING
SIZE
6307
20°
919
30174-0750-00
BEARING SIZE 6307
45°
BEARING SIZE 6305
C
B
ROLL
DIAMETERC152
35°
ROLL DIAMETER 152
A
16.6
Kgs.
18.1
TOTAL
19.3
16.0
20.5
16.6
24.1
18.1
26.5
19.3
26.8
20.5
28.9
24.1
29.8
26.5
34.9
26.8
ROLL DIAMETER 152
ROLL DIAMETER 178
B
ROLL
DIAMETERC178
20°
30°
330
50
20°
298
284
344
330
50174-0900-00
50174-0800-00
337
298
50174-1000-00
50174-0900-00
BEARING SIZE 6307
D
MASS Kgs.
BEARING
SIZE
6307
35°
45°
20°
30°
35°
45°
R.P TOTAL
MASS Kgs.
114
30°
143
35°
200
45°
1136
20°
1079
30°
1042
35°
962
45°
30.3
R.P
43.2
TOTAL
54
50
121
114
151
143
210
200
1177
1136
1117
1079
1079
1042
996
962
31.5
30.3
44.7
43.2
383
344
68
54
140
121
174
151
238
210
1289
1177
1223
1117
1182
1079
1090
996
34.2
31.5
48.9
44.7
364
337
410
383
77
68
154
140
189
174
257
238
1367
1289
1297
1223
1253
1182
1155
1090
36.3
34.2
51.6
48.9
50174-1050-00
50174-1000-00
389
364
435
410
85
77
166
154
204
189
275
257
1439
1367
1365
1297
1319
1253
1216
1155
38.4
36.3
54.3
51.6
50174-1200-00
50174-1050-00
442
389
488
435
104
85
193
166
234
204
312
275
1592
1439
1510
1365
1459
1319
1344
1216
42.3
38.4
59.7
54.3
50174-1350-00
50174-1200-00
494
442
540
488
121
104
219
193
264
234
349
312
1741
1592
1652
1510
1596
1459
1469
1344
46.2
42.3
65.4
59.7
50174-1400-00
50174-1350-00
500
494
546
540
123
121
222
219
267
264
353
349
1758
1741
1669
1652
1612
1596
1484
1469
46.8
46.2
66.0
65.4
50174-1500-00
50174-1400-00
547
500
593
546
139
123
245
222
294
267
386
353
1894
1758
1797
1669
1736
1612
1597
1484
50.4
46.8
70.8
66.0
50174-1600-00
50174-1500-00
567
547
613
593
146
139
255
245
306
294
400
386
1951
1894
1852
1797
1788
1736
1645
1597
51.9
50.4
72.9
70.8
50174-1800-00
50174-1600-00
631
567
677
613
168
146
287
255
342
306
446
400
2135
1951
2026
1852
1957
1788
1800
1645
56.7
51.9
79.8
72.9
50174-2000-00
50174-1800-00
706
631
752
677
194
168
325
287
385
342
499
446
2352
2135
2232
2026
2155
1957
1981
1800
62.4
56.7
90.9
79.8
50174-2200-00
50174-2000-00
785
706
831
752
221
194
364
325
431
385
554
499
2579
2352
2447
2232
2364
2155
2172
1981
68.4
62.4
99.6
90.9
Note:
20˚, 30˚,
35˚ or 2447
45˚.
50174-2200-00
221required
364Troughing
431 Angle:
554
2579
2364
2172
68.4
99.6
C
D
Note:
45˚.
20°
30°Troughing
35° Angle:
45°20˚, 30˚,
20°35˚ or 1079
30°
35174-0750-00
63 required
127
156
211
1136
35°
1042
35174-0750-00
35174-0800-00
286
300
330
344
63
67
127
134
156
164
211
221
1136
1177
1079
1117
1042
1079
953
987
17.1
17.7
26.6
27.5
35174-0800-00
35174-0900-00
300
339
344
383
67
81
134
153
164
187
221
249
1177
1289
1117
1223
1079
1182
987
1081
17.7
19.5
27.5
29.9
35174-0900-00
35174-1000-00
339
366
383
410
81
90
153
167
187
202
249
268
1289
1367
1223
1297
1182
1253
1081
1146
19.5
20.7
29.9
31.7
CODE NUMBER
A
B
20°
30° C 35°
45°
20°
35°
45°
MASS TOTAL
Kgs.
R.P
35174-1000-00
35174-1050-00
366
391
410
435
90
98
167
179
202
217
268
286
1367
1439
1297
1365
1253
1319
1146
1207
20.7
21.9
31.7
33.2
54174-0750-00
286
330
20°
65
30°
130
35°
160
45°
216
20°
1149
30°
1091
35°
1054
45°
975
R.P
18.3
TOTAL
33.3
35174-1050-00
35174-1200-00
391
444
435
488
98
117
179
206
217
247
286
323
1439
1592
1365
1510
1319
1459
1207
1335
21.9
24.3
33.2
36.8
54174-0750-00
54174-0800-00
286
300
330
344
65
70
130
137
160
168
216
226
1149
1190
1091
1129
1054
1091
975
1009
18.3
18.9
33.3
34.5
35174-1200-00
35174-1350-00
444
496
488
540
117
134
206
232
247
277
323
360
1592
1741
1510
1652
1459
1596
1335
1460
24.3
26.4
36.8
42.2
54174-0800-00
54174-0900-00
300
339
344
383
70
83
137
157
168
191
226
254
1190
1302
1129
1235
1091
1194
1009
1103
18.9
20.7
34.5
37.5
35174-1350-00
35174-1400-00
496
502
540
546
134
136
232
235
277
280
360
364
1741
1758
1652
1669
1596
1612
1460
1475
26.4
26.7
42.2
42.5
54174-0900-00
54174-1000-00
339
366
383
410
83
93
157
170
191
206
254
273
1302
1380
1235
1309
1194
1265
1103
1168
20.7
21.9
37.5
39.6
35174-1400-00
35174-1500-00
502
549
546
593
136
152
235
258
280
307
364
397
1758
1894
1669
1797
1612
1736
1475
1588
26.7
28.8
42.5
45.8
54174-1000-00
54174-1050-00
366
391
410
435
93
101
170
183
206
221
273
291
1380
1452
1309
1377
1265
1331
1168
1229
21.9
22.8
39.6
41.4
35174-1500-00
35174-1600-00
549
569
593
613
152
159
258
268
307
319
397
411
1894
1951
1797
1852
1736
1788
1588
1636
291
328
1452
1605
1377
1522
1331
1471
1229
1357
22.8
25.2
41.4
45.6
35174-1600-00
35174-1800-00
569
633
613
677
159
181
268
300
319
355
411
457
1951
2135
1852
2026
1788
1957
1636
1791
54174-1050-00
391 CONVEYOR
435
101
183
221
28.8
45.8
54174-1200-00
444
488
119
209
251
29.7
47.0
MANUFACTURERS
OF HIGH QUALITY
EQUIPMENT
35174-1800-00
35174-2000-00
633
708
677
752
181
207
300
338
355
398
457
510
2135
2352
2026
2232
1957
2155
35174-2000-00
35174-2200-00
708
787
752
831
207
234
338
377
398
444
510
565
2352
2579
2232
2447
2155
2364
A
CODE NUMBER
A
B
20°
30° C 35°
45°
20°
444
496
488
540
119
137
209
235
251
281
328
365
1605
1754
1522
1664
1471
1608
1357
1482
25.2
27.6
45.6
49.5
1791
1972
32.4
35.7
54.5
59.9
54174-1350-00
54174-1400-00
496
502
540
546
137
139
235
238
281
284
365
369
1754
1771
1664
1681
1608
1624
1482
1497
27.6
49.5
50.1
1972
2163
35.7
39.0
59.9
65.6
54174-1400-00
54174-1500-00
502
549
546
593
139
155
238
262
284
311
369
402
1771
1907
1681
1809
1624
1748
1497
1610
27.6
29.7
50.1
53.7
65.6
54174-1500-00
54174-1600-00
549
569
593
613
155
162
262
272
311
323
402
416
1907
1964
1809
1864
1748
1800
1610
1658
29.7
30.6
53.7
55.2
54174-1600-00
54174-1800-00
569
633
613
677
162
184
272
304
323
359
416
462
1964
2148
1864
2038
1800
1969
1658
1813
30.6
33.6
55.2
60.0
54174-1800-00
54174-2000-00
633
708
677
752
184
210
304
341
359
402
462
515
2148
2365
2038
2244
1969
2167
1813
1994
33.6
36.9
60.0
66.0
54174-2000-00
54174-2200-00
708
787
752
831
210
237
341
381
402
448
515
570
2365
2592
2244
2459
2167
2376
1994
2185
36.9
40.2
66.0
76.2
54174-2200-00
237required
381Troughing
448 Angle:
570
2592
Note:
20˚, 30˚,
35˚ or 2459
45˚.
2376
2185
40.2
76.2
40174-0750-00
286
330
20°
50
30°
114
35°
143
45°
198
20°
1136
40174-0750-00
40174-0800-00
286
300
330
344
50
54
114
121
143
151
198
208
1136
1177
40174-0800-00
40174-0900-00
300
339
344
383
54
68
121
140
151
174
208
236
1177
1289
40174-0900-00
40174-1000-00
339
366
383
410
68
77
140
154
174
189
236
255
40174-1000-00
40174-1050-00
366
391
410
435
77
85
154
166
189
204
255
273
40174-1050-00
40174-1200-00
391
444
435
488
85
104
166
193
204
234
273
310
40174-1200-00
40174-1350-00
444
496
488
540
104
121
193
219
234
264
40174-1350-00
40174-1400-00
496
502
540
546
121
123
219
222
264
267
40174-1400-00
40174-1500-00
502
549
546
593
123
139
222
245
267
294
40174-1500-00
40174-1600-00
549
569
593
613
139
146
245
255
294
306
40174-1600-00
40174-1800-00
569
633
613
677
146
168
255
287
306
342
40174-1800-00
40174-2000-00
633
708
677
752
168
194
287
325
342
385
40174-2000-00
40174-2200-00
708
787
752
831
194
221
325
364
385
431
40174-2200-00
787
831
221
364
431
Note: “RP” is an abbreviation for Rotating Parts. “00” – Insert required Troughing
Note:
“00” – Insert required Troughing
BEARING SIZE 6306
BEARING
SIZE
D
MASS6306
Kgs.
30° D
35°
45°
MASS TOTAL
Kgs.
R.P
30°
1079
35°
1042
45°
953
R.P
20.7
TOTAL
29.9
1079
1117
1042
1079
953
987
20.7
21.3
29.9
31.1
1117
1223
1079
1182
987
1081
21.3
23.4
31.1
33.8
1081
1146
23.4
24.9
A
24.9
26.1
35.6
37.4
SERIES
15
1289
1223
1182
1367
1297
1253
CODE NUMBER
1367
1297
1253
1439
1365
1319
1439
1365
1319
1592
1510
1459
15174-0500-00
310
1592
1510
1459
347
1741
1652
1596
15174-0600-00
347
1741
1652
1596
351
1758
1669
1612
15174-0650-00
351
1758
1669
1612
384
1894
1797
1736
15174-0750-00
384
1894
1797
1736
398
1951
1852
1788
15174-0800-00
398
1951
1852
1788
444
2135
2026
1957
15174-0900-00
444
2135
2026
1957
497
2352
2232
2155
15174-1000-00
497
2352
2232
2155
552
2579
2447
2364
15174-1050-00
552
2579
2447
2364
Angle: 20˚, 30˚, 35˚ or 45˚.
15174-1200-00
Angle: 20˚, 30˚, 35˚ or 45˚.
15174-1350-00
1146
1207
1207
1335
1335
1460
1460
1475
1475
1558
1558
1636
1636
1791
1791
1972
1972
2163
2163
26.1
28.8
191
28.8
31.5
226
31.5
31.8
246
31.8
34.2
280
34.2
35.4
296
35.4
38.4
333
38.4
42.3
360
42.3
46.5
385
46.5
438
Note:
SERIES 59
CODE NUMBER
SERIES
59
ROLL
DIAMETER
127
CODE NUMBER
33.8
35.6
37.4
41.3
41.3
47.3
47.3
47.6
47.6
51.2
51.2
52.7
52.7
60.5
60.5
66.5
66.5
72.8
72.8
B
212
247
267
301
317
354
381
406
459
490
511
15174-1400-00
496
517
15174-1500-00
543
564
15174-1600-00
563
584
15174-1800-00
627
648
ROLL DIAMETER 178
B
ROLL
DIAMETERC178
BEARING
SIZE
6205
B
20°
30° C 35°
A
PAGE 17
SERIES 20
CODE NUMBER
20174-0500-00
ROLL DIAMETER 152
A
194
B
212
BEARING SIZE 6308
D
MASS6308
Kgs.
BEARING
SIZE
A
45°
20°
30° D
C
D
MASS Kgs.
20°
30°
35°
45°
20°
30°
59174-0750-00
286
330
52
117
147
203
1149
1091
20°
30°
35°
45°
20°
30°
35°
45°
R.P TOTAL
59174-0750-00
286
330
52
117
147
203
1149
1091
59174-0800-00
300
344
57
124
155
213
1190
1129
29
71
92
131
748
710
685
636
7.5
11.8
59174-0800-00
300
344
57
124
155
213
1190
1129
59174-0900-00
339
383
70
144
178
241
1302
1235
41
89
112
155
849
806
777
720
8.4
13.3
59174-0900-00
339
383
70
144
178
241
1302
1235
59174-1000-00
366
410
80
157
193
260
1380
1309
48
99
123
169
907
860
829
769
9.0
13.9
59174-1000-00
366
410
80
157
193
260
1380
1309
59174-1050-00
391
435
88
170
208
278
1452
1377
59
116
143
194
1005
954
919
851
9.9
15.4
59174-1050-00
391
435
88
170
208
278
1452
1377
59174-1200-00
444
488
106
196
238
315
1605
1522
65
124
152
205
1051
997
961
889
10.5
16.0
59174-1200-00
444
488
106
196
238
315
1605
1522
59174-1350-00
496
540
124
222
268
352
1754
1664
77
142
173
231
1157
1098
1059
979
11.4
17.5
59174-1350-00
496
540
124
222
268
352
1754
1664
59174-1400-00
502
546
126
225
271
356
1771
1681
87
156
189
250
1235
1172
1130
1044
12.3
18.7
59174-1400-00
502
546
126
225
271
356
1771
1681
59174-1500-00
549
593
142
249
298
389
1907
1809
95
168
203
268
1307
1240
1196
1104
12.9
19.9
59174-1500-00
549
593
142
249
298
389
1907
1809
59174-1600-00
569
613
149
259
310
403
1964
1864
113
195
233
305
1459
1385
1336
1232
14.4
22.0
59174-1600-00
569
613
149
259
310
403
1964
1864
59174-1800-00
633
677
171
291
346
449
2148
2038
131
221
263
341
1609
1527
1474
1358
15.9
24.1
59174-1800-00
633
677
171
291
346
449
2148
2038
59174-2000-00
708
752
197
328
389
502
2365
2244
345
1627
1543
1490
1372
15.9
24.4
224
266
133
59174-2000-00
708
752
197
328
389
502
2365
2244
59174-2200-00
787
831
224
368
435
557
2592
2459
378
1762
1672
1614
1486
17.1
26.2
247
293
149
59174-2200-00
224required
368Troughing
435 Angle:
557
2592
Note:
20˚, 30˚,
35˚ or 2459
45˚.
392
1820
1726
1667
1534
17.7
27.1
257
305
156
178
289
341
438
2004
1901
1836
1688
19.5
29.8
REFER TO PAGES 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT
Note:
30° D
54174-1200-00
54174-1350-00
ROLL DIAMETER 178
ROLL
DIAMETERC178
B
BEARING SIZE 6308
MASS6308
Kgs.
BEARING SIZE
47.0
54.5
THREE ROLL PLAIN
2364
2163
39.0
SUSPENDED
SERIES 40
SERIES
40
CODE NUMBER
ROLL DIAMETER 152
ROLL DIAMETER 152
29.7
32.4
35174-2200-00
787
831
234
377
444
565
2579
2447
Note:
SERIES 54
SERIES 54
Note:
Angle: 20˚, 30˚, 35˚ or 45˚. D
CODE NUMBER
A Rotating Parts.B “00” – Insert required Troughing
C
BEARING SIZE 6205
C
D
MASS Kgs.
20°
30°
35°
45°
20°
30°
35°
45°
R.P
TOTAL
16
59
79
123
748
710
685
654
12.3
16.6
35°
45°
MASS TOTAL
Kgs.
R.P
35°
1054
45°
975
R.P
31.2
TOTAL
46.2
1054
1091
975
1009
31.2
32.1
46.2
47.7
1091
1194
1009
1103
32.1
35.1
47.7
51.9
1194
1265
1103
1168
35.1
37.2
51.9
54.9
1265
1331
1168
1229
37.2
39.9
54.9
57.6
1331
1471
1229
1357
39.9
43.2
57.6
63.6
1471
1608
1357
1482
43.2
47.1
63.6
69.3
1608
1624
1482
1497
47.1
47.7
69.3
69.9
1624
1748
1497
1610
47.7
51.3
69.9
75.0
1748
1800
1610
1658
51.3
52.5
75.0
80.1
1800
1969
1658
1813
52.5
57.6
80.1
87.6
1969
2167
1813
1994
57.6
63.3
87.6
96.3
2167
2376
1994
2185
63.3
69.3
96.3
109.5
2376
2185
69.3
109.5
SERIES 55
ROLL DIAMETER 152
CODE NUMBER
A
B
D
Shackle Width
CRS @ 35˚
CRS @ 45˚
45°
35°
45°
R.P
TOTAL
55174-1200-00
444
494
383
490
1857
1681
25.8
75.7
55174-1350-00
496
546
413
527
1995
1807
28.2
80.2
55174-1400-00
502
552
416
531
2010
1821
28.5
80.8
55174-1500-00
549
599
443
565
2134
1934
30.6
84.7
55174-1600-00
569
619
455
579
2187
1983
31.2
86.5
55174-1800-00
633
683
491
624
2356
2137
34.2
92.9
55174-2000-00
708
758
534
677
2554
2318
37.5
98.8
55
Note
Note
45
45
50
55174-2200-00
787
837
580
733
2762
2509
40.8
105.7
50
Note
55174-2400-00
848
898
615
776
2923
2656
43.5
111.1
55174-2500-00
873
923
629
794
2989
2716
44.7
116.5
Note
Bolt Size
60
Note Consult your Prok representative
for more details
SERIES 55
CODE NUMBER
Note:
ROLL DIAMETER 152
A
B
MASS Kgs.
35°
SERIES
BEARING SIZE 6309
C
C
BEARING SIZE 6309
SERIES 60
D
CODE NUMBER
MASS Kgs.
35°
45°
35°
45°
R.P
TOTAL
ROLL DIAMETER 178
A
B
BEARING SIZE 6309
C
D
MASS Kgs.
R.P
TOTAL
55174-1200-00
444
494
383
490
1857
1681
25.8
75.7
60174-1200-00
444
494
370
477
1857
1681
43.8
93.7
55174-1350-00
496
546
413
527
1995
1807
28.2
80.2
60174-1350-00
496
546
400
514
1995
1807
47.7
99.7
55174-1400-00
502
552
416
531
2010
1821
28.5
80.8
60174-1400-00
502
552
403
518
2010
1821
48.3
100.6
55174-1500-00
549
599
443
565
2134
1934
30.6
84.7
60174-1500-00
549
599
430
552
2134
1934
51.9
106.3
55174-1600-00
569
619
455
579
2187
1983
31.2
86.5
60174-1600-00
569
619
442
566
2187
1983
53.4
108.7
55174-1800-00
633
683
491
624
2356
2137
34.2
92.9
60174-1800-00
633
683
478
611
2356
2137
58.2
116.2
55174-2000-00
708
758
534
677
2554
2318
37.5
98.8
60174-2000-00
708
758
521
664
2554
2318
63.9
125.2
55174-2200-00
787
837
580
733
2762
2509
40.8
105.7
60174-2200-00
787
837
567
720
2762
2509
69.9
134.8
55174-2400-00
848
898
615
776
2923
2656
43.5
111.1
60174-2400-00
848
898
602
763
2923
2656
74.7
145.3
55174-2500-00
873
923
629
794
2989
2716
44.7
116.5
60174-2500-00
SERIES 45
873
923
616
ROLL
DIAMETER
159781
2989
Note:
SERIES 60
CODE NUMBER
B
BEARING SIZE 6309
C
SERIES
Shackle Width
370
496
546 @ 45˚
CRS
502
Bolt
552 Size
34
45°
34
60174-1200-00
444
60174-1350-00
60174-1400-00
60174-1500-00
549
60174-1600-00
569
619
442
566
60174-1800-00
633
683
478
60174-2000-00
708
758
521
60174-2200-00
787
837
60174-2400-00
848
898
SERIES 45
873
60174-2500-00
494
35°
CRS @ 35˚
D
45
45
MASS Kgs.
35°
45°
R.P
TOTAL
1857
1681
43.8
93.7
45
477
400
50
514
M16 1995
1807
47.7
99.7
403
M16
518
2010
1821
48.3
100.6
1934
51.9
106.3
2187
1983
53.4
108.7
611
2356
2137
58.2
116.2
664
2554
2318
63.9
125.2
567
720
2762
2509
69.9
134.8
602
763
2923
2656
74.7
145.3
923
616
ROLL
DIAMETER
159 781
2989
50
45°
35°
45°
2716
76.5
148.6
BEARING
SIZE
6307
CODE NUMBER
A Rotating Parts. B “00” – Insert required Troughing
C
Note:
Angle: 35˚ or 45˚.
ROLL DIAMETER 178
A
35°
50
Note
Prok representative
599 Consult your430
552 for more details
2134
Note:
Angle: 35˚ or 45˚.
CODE NUMBER
A Rotating Parts. B “00” – Insert required Troughing
C
45°
20°
30°
35°
45°
R.P
TOTAL
20°
30°
35°
45°
R.P
TOTAL
59
123
153
210
1136
1079
1042
962
24.0
37.5
45175-0800-00
300
344
64
130
161
220
1177
1117
1079
996
24.6
38.4
45175-0900-00
339
383
77
150
184
248
1289
1223
1182
1090
27.3
42.0
45175-1000-00
366
410
87
163
199
267
1367
1297
1253
1155
29.4
45.3
45175-1050-00
391
435
95
176
213
279
1439
1365
1319
1216
31.8
48.0
45175-1200-00
444
488
113
202
244
322
1592
1510
1459
1344
34.8
52.8
45175-1350-00
496
540
131
228
274
359
1741
1652
1596
1469
39.3
58.8
45175-1400-00
502
546
133
231
277
363
1758
1669
1612
1484
39.6
59.1
45175-1500-00
549
593
149
255
304
396
1894
1797
1736
1597
42.3
63.3
45175-1600-00
569
613
156
265
315
410
1951
1852
1788
1645
44.4
66.0
45175-1800-00
633
677
178
297
352
456
2135
2026
1957
1800
49.2
72.6
45175-2000-00
708
752
204
334
395
509
2352
2232
2155
1981
54.6
80.1
45175-2200-00
787
831
231
374
440
564
2579
2447
2364
2172
60.0
91.8
CODE NUMBER
35°
45°
330
SERIES 50
30°
35°
286
D
20°
MASS Kgs.
30°
45175-0750-00
2716
76.5
148.6
BEARING
SIZE
6307
MASS Kgs.
D
20°
ROLL DIAMETER 178
A
B
34
BEARING SIZE 6307
C
D
MASS Kgs.
20°
30°
35°
45°
20°
30°
35°
45°
R.P
TOTAL
45175-0750-00
286
330
59
123
153
210
1136
1079
1042
962
24.0
37.5
50175-0750-00
286
330
50
114
143
200
1136
1079
1042
962
27.3
40.5
45175-0800-00
300
344
64
130
161
220
1177
1117
1079
996
24.6
38.4
50175-0800-00
300
344
54
121
151
210
1177
1117
1079
996
27.6
41.4
45175-0900-00
339
383
77
150
184
248
1289
1223
1182
1090
27.3
42.0
50175-0900-00
339
383
68
140
174
238
1289
1223
1182
1090
30.9
45.6
45175-1000-00
366
410
87
163
199
267
1367
1297
1253
1155
29.4
45.3
50175-1000-00
366
410
77
154
189
257
1367
1297
1253
1155
33.3
49.2
45175-1050-00
391
435
95
176
213
279
1439
1365
1319
1216
31.8
48.0
50175-1050-00
391
435
85
166
204
275
1439
1365
1319
1216
36.0
52.5
45175-1200-00
444
488
113
202
244
322
1592
1510
1459
1344
312
1592
1510
1459
1344
39.6
57.3
45175-1350-00
496
540
131
228
274
359
1741
1652
1596
1469
50175-1200-00
444
488
104
193
234
34.8
52.8
MANUFACTURERS
OF HIGH QUALITY
CONVEYOR
EQUIPMENT
45175-1400-00
502
546
133
231
277
363
1758
1669
1612
45175-1500-00
549
593
149
255
304
396
1894
1797
1736
45175-1600-00
569
613
156
265
315
410
1951
45175-1800-00
633
677
178
297
352
456
2135
2026
1957
1800
45175-2000-00
708
752
204
334
395
509
2352
2232
2155
45175-2200-00
787
831
231
374
440
564
2579
2447
2364
SERIES 50
CODE NUMBER
B
58.8
50175-1350-00
496
540
121
219
264
349
1741
1652
1596
1469
44.7
64.2
1484
39.6
59.1
50175-1400-00
502
546
123
222
267
353
1758
1669
1612
1484
45.0
64.5
1597
42.3
63.3
50175-1500-00
549
593
139
245
294
386
1894
1797
1736
1597
48.3
68.4
66.0
50175-1600-00
569
613
146
255
306
400
1951
1852
1788
1645
50.7
72.0
49.2
72.6
50175-1800-00
633
677
168
287
342
446
2135
2026
1957
1800
56.1
79.5
1981
54.6
80.1
50175-2000-00
708
752
194
325
385
499
2352
2232
2155
1981
62.1
91.2
2172
60.0
91.8
50175-2200-00
787
831
221
364
431
554
2579
2447
2364
2172
68.1
99.9
THREE ROLL PLAIN
1852
1788
1645
44.4
SUSPENDED
ROLL DIAMETER 178
A
39.3
BEARING SIZE 6307
C
D
20°
30°
35°
45°
50175-0750-00
286
330
50
114
143
200
50175-0800-00
300
344
54
121
151
210
50175-0900-00
339
383
68
140
174
238
50175-1000-00
366
410
77
154
189
257
50175-1050-00
391
435
85
166
204
275
50175-1200-00
444
488
104
193
234
312
50175-1350-00
496
540
121
219
264
349
50175-1400-00
502
546
123
222
267
353
50175-1500-00
549
593
139
245
294
386
50175-1600-00
569
613
146
255
306
400
50175-1800-00
633
677
168
287
342
446
50175-2000-00
708
752
194
325
385
499
50175-2200-00
787
831
221
364
431
554
SERIES 15
30°
35°
20°
CODE NUMBER
1136
1079
1042
1177
1117
1079
15174-0500-00
1289
1223
1182
15174-0600-00
1367
1297
1253
15174-0650-00
1439
1365
1319
15174-0750-00
1592
1510
1459
15174-0800-00
1741
1652
1596
15174-0900-00
1758
1669
1612
15174-1000-00
1894
1797
1736
15174-1050-00
1951
1852
1788
15174-1200-00
2135
2026
1957
15174-1350-00
2352
2232
2155
15174-1400-00
2579
2447
2364
15174-1500-00
MASS Kgs.
45°
962
996
1090
1155
1216
1344
1469
1484
1597
1645
1800
1981
2172
R.P
A
27.3
27.6
191
30.9
226
33.3
246
36.0
280
39.6
296
44.7
333
45.0
360
48.3
385
50.7
438
56.1
490
62.1
496
68.1
543
ROLL DIAMETER 127
TOTAL
B
40.5
41.4
45.6
49.2
52.5
57.3
64.2
64.5
68.4
72.0
79.5
91.2
99.9
BEARING SIZE 6205
C
D
MASS Kgs.
20°
30°
35°
45°
20°
30°
35°
45°
R.P
TOTAL
212
29
71
92
131
748
710
685
636
7.5
11.8
247
41
89
112
155
849
806
777
720
8.4
13.3
267
48
99
123
169
907
860
829
769
9.0
13.9
301
59
116
143
194
1005
954
919
851
9.9
15.4
317
65
124
152
205
1051
997
961
889
10.5
16.0
354
77
142
173
231
1157
1098
1059
979
11.4
17.5
381
87
156
189
250
1235
1172
1130
1044
12.3
18.7
406
95
168
203
268
1307
1240
1196
1104
12.9
19.9
459
113
195
233
305
1459
1385
1336
1232
14.4
22.0
511
131
221
263
341
1609
1527
1474
1358
15.9
24.1
517
133
224
266
345
1627
1543
1490
1372
15.9
24.4
564
149
247
293
378
1762
1672
1614
1486
17.1
26.2
15174-1600-00
563
584
156
257
305
392
1820
1726
1667
1534
17.7
27.1
15174-1800-00
627
648
178
289
341
438
2004
1901
1836
1688
19.5
29.8
REFER TO PAGES 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT
Note:
SERIES 20
CODE NUMBER
20174-0500-00
ROLL DIAMETER 152
A
194
B
212
BEARING SIZE 6205
C
D
MASS Kgs.
20°
30°
35°
45°
20°
30°
35°
45°
R.P
TOTAL
16
59
79
123
748
710
685
654
12.3
16.6
PAGE 18
ACCESSORIES
ROLL AD APT ORS
SUGGESTED SUSPENDED
ROLL ATTACHMENT
READILY AVAILABLE TO SUIT
MOST ALTERNATIVE BRANDS
OF BASE FRAMES
CONSULT YOUR NEAREST
SMH OFFICE FOR
FURTHER DETAILS.
METHOD 1
READILY PERMITS IDLER TO BE
TAKEN OUT OF SERVICE WHILST
CONVEYOR IS RUNNING, FOR LATER
REPLACEMENT DURING PLANNED
DOWNTIME.
CONSULT YOUR NEAREST SMH
OFFICE FOR FURTHER DETAILS
OR RECOMMENDATION.
STONE GU ARDS
PROTECTS SEALS DURING
WASH DOWN
AVAILABLE IN GALVABOND.
ACTS AS ROLL RETAINER
SMH OFFICE FOR
FURTHER DETAILS.
METHOD 2
ROLL RETAINERS
RECOMMENDED FOR USE ON
SUSPENDED IMPACT BED
INSTALLATION.
CUSHION PADS SHOULD BE USED
FOR LARGE AND HIGH IMPACT
LOAD CONDITIONS.
OR RECOMMENDATION.
RETAINER PLATES AVAILABLE
FOR ALL SERIES
PREVENTS ROLLS FROM
DISLODGING IN A SEVERE
STRUCTURAL VIBRATION
ENVIRONMENT
NO SPECIAL TOOLS REQUIRED
RETAINER CLIPS AVAILABLE
FOR ALL SERIES.
MANUFACTURED FROM SPRING STEEL.
POSITIVELY LOCKS THE
ROLL ONTO THE FRAME.
NO SPECIAL TOOLS REQUIRED.
SMH OFFICE FOR
FURTHER DETAILS.
METHOD 3
OFTEN USED FOR TROUGH AND VEE TYPE
SUSPENDED IDLER INSTALLATION.
OR RECOMMENDATION.
IDLER A
METHOD 4
TR OUGH SIDE GUIDE ROLL
AVAILABLE IN VARIOUS DIAMETERS AND
LENGTHS.
CONSULT YOUR NEAREST SMH OFFICE FOR
FURTHER DETAILS.
USED FOR TROUGH AND VEE
TYPE RETURN ON SUSPENDED IDLERS.
OR RECOMMENDATION.
METHOD 5
AVAILABLE IN VARIOUS DIAMETERS AND
LENGTHS.
FURTHER DETAILS.
DOUBLE SHACKLE MOUNTING
USED FOR SUSPENDED IDLER
RETURN APPPLICATIONS.
OR RECOMMENDATION.
PR OK BeltGuideTM
USED FOR TROUGH AND RETURN TYPE
SUSPENDED IDLER APPPLICATIONS.
RETURN SIDE GUIDE ROLL
METHOD 6
• THESE ARE VERY USEFUL FOR DIFFICULT
BELT TRACKING SITUATIONS FOR FLAT OR
TROUGHED BELT CONVEYORS.
• BRACKETS ARE HANDED TO BE USED IN
PAIRS MOUNTED IN LINE ACROSS THE BELT.
• SEALED FOR LIFE CONSTRUCTION WITH
ANTI-FRICTION BEARINGS.
SIDE GUIDE IDLER FOR HEA VY
DUTY WIDE BELTS
PARTICULARLY USEFUL FOR PREVENTION OF
TORSIONAL LOADS ON STRINGERS ARISING
FROM HORIZONTAL BELT FORCES.
2 - 92
PAGE 19
ACCESSORIES
RUBBER DISC AND LAGGING
SUPERSENSITIVE TRAINER TM
Rubber disc rolls are utilised in a number of
areas of a conveyor and can be supplied in
various configurations and compounds.
AVAILABLE IN ALL SERIES, TROUGHING
ANGLES AND BELT WIDTHS.
FEA TURES:
• IN-LINE PIVOT FOR INCREASED SENSITIVITY
• LINKAGE SYSTEM FOR SERVO ROLLS
ENSURES CONSTANT GAP BETWEEN
ROLLERS AND BELT EDGE, GIVING CLOSER
CONTROL OF ACTION.
• ROBUST ANTI-FRICTION BEARING PIVOT
ASSEMBLY.
Impact Disc
These rubber disc rolls are used in the impact or
loading area of conveyors. The discs are
designed to absorb the impact and to be
resistant to excessive wear. A number of
configurations are available for different
applications culminating in the mighty bull nose
rubbers for the really tough applications.
FURTHER DETAILS.
HEA VY DUTY PO WERED
BELT TRAINING MODULE
Rubber discs are often used on return rolls for
dirty belt applications. SMH can also
supply rubber lagged rolls for this type of
application. The rubber generally prevents
material from building up on the roll.
USED IN WIDE BELT APPLICATIONS WHERE
TRAINING OF THE BELT IS A PROBLEM.
SYSTEM CONSISTS OF A BANK OF LINKED
TRAINERS THAT ARE CONTROLLED BY A
POWERED ACTUATOR.
FURTHER DETAILS.
BULL NOSE IMPACTS
PR OK PIVO T
THE UNIT IS A LARGE DIAMETER INTERLOCKING PLATE BEARING THAT
OVERCOMES A NUMBER OF POTENTIAL PROBLEMS IN TRADITIONAL
BEARING ARRANGEMENTS. THIS BEARING UNIT, IN KEEPING WITH
PROK GROUP SOBJECTIVES OF ONLY SUPPLYING PRODUCTS THAT
MEET THE HIGHEST STANDARDS OF QUALITY. WILL PROVIDE TROUBLE
FREE LONG LIFE FOR MOST DIFFICULT BEARING APPLICATION
REQUIREMENTS IN THE HARSH OPERATING ENVIRONMENTS WE
EXPERIENCE IN THE FIELD.
THE BEARING UNIT CAN BE RETRO FITTED TO MOST
EXISTING FRAMES
LAGGED ROLL
2 - 89
SMH IMPACT STATIONS
IMPACT DISCS
RUBBER DISCS TO SUIT ALL APPLICATIONS
SMH impact stations can be designed to suit your2 - 98
particular applications and will only be
recommended if it is the best solution to your
needs.
Below is a selection of rubber discs available from the SMH standard range.
Manufactured to I.S.O. 3302 Standard and Tolerances.
Our impact stations include hybrid beds that
incorporate the use of impact rolls with the
sealing capabilities of impact bars.
B
C
1651-133-060
133
52
1651-159-089
159
58
1651-178-089
178
58
The patented SMH impact bars present a
controlled collapse and recovery which will
absorb the full impact and not transmit the shock
loading to the structure. This ability to absorb the
impact helps to protect the conveyor belt from
damage. This SMH design and installation will
also ensure minimum wear to the underside of
the belt.
Supplied
inrubberorFRAS compound.
CODE No.
B
C
1652-133-060
133
25
1652-159-089
CODE No.
159
39
1652-178-089
178
39
END IMPACT
RUBBER
FLANGED
CENTRE
IMPACT
RUBBER
Supplied
UEST
B
C
1654-159-089
CODE No.
159
42
1654-178-089
178
42
Supplied
BULLNOSE
IMPACT
RUBBER
Heavy Duty Retractable Idlers
Allows rolls to be changed under loading skirt
areas without removing adjacent idlers.
No idler misalignment during roll change.
Consult your nearest SMH office for further
details or recommendations.
B
C
1653-127-060
CODE No.
127
32
1653-152-089
152
52
1653-178-089
178
52
RETURN
RUBBER
DISC
Supplied
Jack DownTM Idler
CODE No.
Rolls can be easily changed over in an impact
area. The idler frame can be readily lowered for
access purposes using a standard auto jack to
enable roll replacement.
Consult your nearest SMH Representative for
further details.
B
C
1657-159-089
159
52
1657-250-194
250
52
Supplied
inAbrasionresistant
rubberor
Flame resistant
chloroprene
rubber.
2 - 97
RETURN
RUBBER
DISC
PAGE 20
ACCESSORIES
ALUMINIUM PRODUCTS
WINDGUARDS
Sandvik Material Handling manufacture a range of these rolls for special applications.
.
Rolls are fitted with stainless outer seal. Aluminium frames can be supplied. Consult your nearest
SMH Representative f or further details.
Manufactured from galvanised heavy gauge steel
• Rigid construction
• Slotted mounting holes for easy attachment
• Rolled safety edge
• Fluted for added strength
• Supplied complete with mounting bolts.
Available in following sizes:
A
584
584
889
B
343
432
508
Large windguard for special applications.
Consult your nearest SMH representative for
specific recommendations.
Available in following sizes:
vided on request.
A
1690
2000
B
430
430
GALVANISED PRODUCTS
Galvanised frames are available throughout our standard product range, and provide a durable
long life coating for most applications.
Fully galvanised roll shells can be provided on request.
-
CHAMPION ASKIRT CLAMP
CONVEYOR
The Sandvik Materials Handling Skirt Clamp can stop your skirt spillage now. The Champion Skirt
• All parts are zinc plated for corrosion
resistance
• Available ex-stock
because
its unique design
concept
• Particularly
user friendly
in is:
awkward or difficult areas
This is the complete system that protects
• Easy to Fit
• Skirts can be adjusted easily by one man
your equipment and your products. Any skirt
system must be user friendly to ensure that
• Easy to release and adjust
• All parts are zinc plated for corrosion resistance
stainless
on
it will not(also
worksupplied
only oninthe
day its steel
installed
request)
but tomorrow, and for as long as necessary.
• Particularly user friendly in awkward or
The key is reliable and easy adjustment.
difficult
areas ex-stock
• Available
yourand
nearest
representative
for
• Skirts
cancomplete
be adjusted
easily
one
This
is the
system
thatbyprotects
your Consult
equipment
yourSMH
products.
Any skirt
details.
man must be user friendly to ensure that it will further
system
not work
only on the day its installed but
tomorrow, and for as long as necessary. The key is reliable and easy adjustment.
Consult your nearest SMH representative for further details.
CCESSORIES
PAGE 21
SMH can supply and install complete system for all conveyor applications..
• Pull wire switch is tested to SAA Code 1755 - 1986.
• Simple design ensures low maintenance.
• Robust non-metallic enclosure.
• Internal switch connections are fully shrouded for added safety during routine inspection.
2 - 101
CHAMPION
SKIRT
CLAMPits unique design concept is:
Clamp system works
well because
Easy to Fit
The •Materials
Handling Champion Skirt
Clamp can stop your skirt spillage now. The
• Easy
to release
adjust
Champion
Skirt
Clamp and
system
works well
CONVEYOR EMERGENCY PULL WIRE SWITCH SYSTEM
WEIGH IDLERS
WEIGH IDLER SPECIFICATION
LEAD ON/OFF BELT SCALE
IDLER SERIES: ______________________
BELT WIDTH: ________________________
INLINE/OFFSET: ____________________
DIMENSIONS
“LEAD ON/OFF” IDLER
A MOUNTING HOLE CENTRES
NOT APPLICABLE
B MOUNTING HOLE CENTRES
C MOUNTING HOLE CENTRES
D INSIDE STRINGERS
NOT APPLICABLE
E ROLLING HEIGHT
F ROLLER FACE
G ROLLER DIAMETER
H TROUGHING ANGLE
J ROLLER PROFILE WIDTH
K ROLLER PROFILE HEIGHT
IF PROK STANDARD REQUIRED - PLEASE INDICATE
TYPICAL WEIGHING STATION
“BELT-SCALE” IDLER
NOT APPLICABLE
IS THIS WEIGH STATION TO SUIT AN EXISTING CONVEYOR (YES/NO)?: ________________________________
IF YES, PLEASE PROVIDE THE PART NO. OF THE EXISTING TROUGH IDLER: ____________________________
Weigher Idlers
These idlers are utilised as lead-in and lead-out assemblies to the belt weigh station.
The roll shells are machined to fine tolerances on T.I.R.
These roll and bases are manufactured to suit the most stringent weigher requirements.
Available in all series and trough angles.
Weighing Idlers
These idlers are used in conjunction with the weighing beam or load cell.
The roll shells are machined to fine tolerances and are accurately balanced.
The rolls can be provided with adjusting screws at the spindle ends, to enable site adjustment of
the profile.
Available in all series and trough angles.
STANDARD BALANCING AND MACHINING OF ROLLERS (0.014 Nm & 0.19 mm T.I.R.) (YES/NO)?: __________
IF NO, PROVIDE DETAILS: __________________ Nm __________________ mm T.I.R.
PROK STANDARD BROACHING ON ROLLS (YES/NO)?: ______________________________________________
IF NO, PLEASE PROVIDE DETAILS:
__________A/F __________________ WIDTH
SPECIAL REMARKS ____________________________________________________________________________
______________________________________________________________________________________________
______________________________________________________________________________________________
2 - 86
PHOTO - COURTESY OF CONTROL SYSTEMS TECHNOLOGY
2-8
PAGE 22
ORDERING INFORMATION
NEED EXTR
RA ROLLS?
PROK IDLER SELECTION DATA SHEET
SHOULD YOU REQUIRE EXTRA ROLLS AS PR
REVIOUSLY SUPPLIED FROM THIS CATALOGUE,
WE SUGGEST YOU USE THE SELECTION TAB
BLE AND PRODUCT CODE NUMBERS BELOW.
Example: Assume you require extra rolls for an idler set previously supplied with a Code Number 45169 - 160
00 - 10 °
Refer tp page no. 2 - 63 of this catalogue and match the code number with the code number shown
n on the left side column of the page.
Note the description shown on the page header is as follows.
“ TWO ROLL PLAIN INLINE VEE RETURN ” and the tabulation header states series “ 45 ”.
Then refer to column “A” where roll facewidth or length is 846mm.
Now refer to selection table on page 2 - 94 and match the description along the top of table and se
eries “45” shown down left side column.
p
The code number for a roll only should read “45585 - 0000”. Substitute the “0000” with roll length previously
identified as 846mm,
therefore the roll only code number for re-order purposes should read “45585 - 0846”.
NEED SPECIAL REPLACEMENT ROLLS?
NEED EXTRA FRAMES?
Whilst the majority of conveyor idler requirements can be supplied from the substantial standard product
range shown in our catalogue, we recognise that there may be instances where special rolls are required.
SHOULD YOU REQUIRE EXTRA FRAMES AS PREVIOUSLY SUPPLIED FROM THIS CATALOGUE,
WE SUGGEST YOU USE THE SELECTION TABLE AND PRODUCT CODE NUMBERS BELOW.
We provide a special roll replacement service to suit most applications and general conveyor upgrades using
our unique “GREASED FOR LIFE” multi-labyrinth bearing sealing arrangement.
SELECTION TABLE: FRAMES AND BRACKETS
IN THE INTEREST OF PRODUCT DEVELOPMENT, PROK GROUP RESERVES THE RIGHT TO CHANGE CRITICAL DATA AT ANY TIM
ME WITHOUT PRIOR NOTICE. DIMENSIONS SHOWN ARE NOMINAL ONLY. CERTIFIED DRAWINGS ARE AVAILABLE ON REQUEST.
3
EXAMPLE: Select the relevant roll configuration shown on this page and enlarge the diagram to A4 size.
Complete the dimensions shown, along with the bearing size and attach the copy to your
formal enquiry.
Send your enquiry to the nearest SMH office for competitive price and delivery details.
y details
PRODUCT DESCRIPTION
SERIES WHERE USED
BELT RANGE
PRODUCT CODE NO.
THREE ROLL PLAIN OFFSET TROUGH
05, 10, 11, 12, 15
0350 / 1200
12305 - 0000 - 00
THREE ROLL PLAIN INLINE TROUGH
15, 20, 25, 30
0500 / 1800
15313 - 0000 - 00
THREE ROLL PLAIN INLINE TROUGH
35, 40, 45, 50, 54, 55, 59, 60
0750 / 2500
45313 - 0000 - 00
THREE ROLL IMPACT OFFSET TROUGH
15
0350 / 1200
12306 - 0000 - 00
THREE ROLL IMPACT INLINE TROUGH
15, 30
0500 / 1800
15314 - 0000 - 00
THREE ROLL IMPACT INLINE TROUGH
45, 50
0750 / 2200
45314 - 0000 - 00
TWO ROLL PLAIN INLINE VEE RETURN
05, 10, 11, 12, 15, 20, 25, 30
0600 / 2500
15369 - 0000 - 00
TWO ROLL PLAIN INLINE VEE RETURN
35, 40, 45, 50, 54, 55, 59, 60
1600 / 3000
45369 - 0000 - 00
TWO ROLL DISC INLINE VEE RETURN
15, 30
0900 / 2500
15369 - 0000 - 00
TWO ROLL DISC INLINE VEE RETURN
45, 50
1600 / 3000
45369 - 0000 - 00
THREE ROLL P / A OFFSET TROUGH TRAINER
05, 10, 11, 12, 15
0350 / 1200
12308 - 0000 - 00
THREE ROLL P / A INLINE TROUGH TRAINER
15, 20, 25, 30
0500 / 1800
15316 - 0000 - 00
THREE ROLL P / A INLINE TROUGH TRAINER
35, 40, 45, 50, 54, 55, 59, 60
0750 / 2500
45316 - 0000 - 00
SINGLE ROLL PLAIN P / A RETURN TRAINER
05, 10, 11, 12, 15, 20, 25, 30
0350 / 1800
15363 - 0000 - 00
SINGLE ROLL PLAIN P / A RETURN TRAINER
35, 40, 45, 50, 54, 55, 59, 60
0750 / 1800
45363 - 0000 - 00
FLAT CARRY IDLER BRACKET
05, 10, 11, 12, 15, 20, 25, 30
0350 / 1800
1036 - 14 - 095
FLAT CARRY IDLER BRACKET
35, 40, 45, 50, 54, 55, 59, 60
0750 / 1800
1036 - 22 - 095
RETURN IDLER BRACKET
05, 10, 11, 12, 15, 20, 25, 30
0350 / 1800
1035 - 14 - 038
RETURN IDLER BRACKET
35, 40, 45, 50, 54, 55, 59, 60
0750 / 1800
1035 - 22 - 038
EXAMPLE:
Assume you require extra frames for an idler set previously supplied with a
Code Number 25113 - 1200 - 35°
Refer to page no. 3 - 18 of this catalogue and match the code number with the code number
shown on left column of the page.
Note the description shown on the page header is as follows
“ THREE ROLL PLAIN INLINE TROUGH ”, and tabulation header states series “ 25 ”.
Then refer to selection table this page and match the description shown in the relevant column
and the series where used.
The frame code number is shown as 15313 - 0000 - 00.
Substitute the belt width and trough angle in lieu of “ 0000 - 00 ”
In this instance frame code number for re-order purposes should read, 15313 - 1200 - 35°
-
PAGE 23
2 - 94
SANDVIK IDLER / STRUCTURE DESIGN SHEET
Client:
Project:
Quote No.:
Date:
Prepared By:
Belt width
Belt speed
Belt type
Belt mass
Material
Bulk Density
Lump size
Design capacity
B10 life
Free fall height
Surcharge angle
Trough angle
Idler spacing
Trough
Return
Impact
Running belt tension
T1 (Carry)
T2 (Return)
Belt deviation
Carry side
Return side
Convex curve radius
Nominal Quantities
Conv. No.
Conv. No.
kg/m
kg/m3
mm
tph
hours
m
°deg
°deg
mm
mm
mm
kN
kN
mm
mm
m
Roll ø mm
Trough
ø
Impact
ø
Transition (5°/20°)
ø
Transition (15°/30°)
ø
Flat carry
ø
Flat return
ø
Vee return (rolls only)
ø
Return trainer
ø
Loadings Required:
Conv. No.
mm
m/s
YES
NO
(Please tick)
1) Convex curve considered.
2) Flooded belt considered.
3) Deviation load considered.
4) Assumptions if needed.
Minimum information required for
design selection by
Sandvik
Checked By:
-
FOR A SMH RECOMMENDATION ON IDLER SELECTION, COMPLETE THIS DATA SHEET
AND FORWARD TO YOUR NEAREST SMC OFFICE.
PAGE 24
Sandvik Materials Handling
Components
Abrasion and
Corrosion
SYSTEMS /
Modernisation
Service
Belt Management
Services
Machines /
Projects
• Rollers, pulleys
and frames
• Supply and Install Abrasion
and Corrosion resistant
rubber
• Design
• Development and
management of plant and
mine maintenance
• No brand bias as we are
independent of
manufacturers
• Conveyor systems
• Wind guards
• Safety-control devices
• Belt lifters (for easy
roller change out)
• Australian agent for the
complete range of REMA
TIP TOP products
• Belt Cover brand belt
covers
• Design, fabrication and
installation of FLEXILO
flexible rubber chutes
• Belt Cleaners
• Abrasive blasting
• Supply
• Commissioning
• Inspection
programs for conveyor
belting, idlers, cleaners,
• Trouble shooting
pulleys and drives
• Reporting and
• Skirting systems
• FLEXAL impact beds
preventative maintenance
of belting, idlers, pulleys,
cleaners, spill curtains,
chutes, structure and
associated components
• REMA Tip Top Products
• Belt Repair
• Belt Splicing
• Maintenance Services
• Shutdowns
• Abrasion and Corrosion
resistant rubber lining
services
• Conditioning Monitoring
• Pulley Rebuilds
• GORO belt fasteners
• Supply, installation and
servicing of rubber and
PVC conveyor belting
Please consult your local representative for
further information on the above
• Reconditioning,
recovering and major
repair of both steel cord
and fabric conveyor belting
• Industry relationships
with all major belt
manufacturers.
• Access to an international
database of available belts.
• Availability of redundant
belt and emergency
supply.
• Lifting and transport
equipment including
homogenization and
reclamation.
• Bucket wheel excavators
• Beltwagons
• Spreaders
• Transport crawlers
• Hopper and cable reel cars
• Extensive engineering,
technical, maintenance and
operations experience in
the mining industry.
• All types of stackers
• A comprehensive
understanding of belt
manufacturing processes
and belt design
• Combined stacker and
circular stockpiles and
covered storage (sheds or
domes)
• Significant conveyor
design capabilities
• Complete range of bulk
shiploaders
• Existing large-scale belt
supply contracts
• Feasibility studies
• Supply belt splicing kits
• Reclaimers (bucket wheel
and scraper)
• Conceptual plant layouts
• Engineering and design
• Project management
• Specialty Conveyor Belt
Fabrication
Locations
Western Australia
Victoria
Queensland
New South Wales
285 Collier Road,
BAYSWATER, WA 6053
Phone +61 8 9347 8500
Fax
+61 8 9347 8600
44 Wedgewood Road,
HALLAM VIC 3803
Phone +61 3 9703 2200
Fax
+61 3 9703 2211
60-62 Qantas Drive
Brisbane Airport QLD 4007
Phone +61 7 3637 7400
Fax
+61 7 3637 7576
Building ‘B’
230 Old Maitland Road,
NEWCASTLE, NSW 2322
Phone +61 2 4964 9942
Fax
+61 2 4964 9950
39 Oroya Street,
KALGOORLIE WA 6432
Phone +61 8 9093 2636
Fax
+61 8 9093 2635
179 Station Street
GEELONG VIC 3214
Phone +61 3 5275 8244
Fax
+61 3 5275 7899
Commercial Avenue,
MACKAY QLD 4740
Phone +61 7 4952 1400
Fax
+61 7 4952 3714
Lot 1671 Munda Way,
PORT HEDLAND WA 6724
Phone +61 8 9140 1659
Fax
+61 8 9172 1767
Tasmania
Lot 1 North Ridge Road
MT ISA
Phone +61 7 4745 0900
Fax
+61 7 4745 0901
Lot 503 Pemberton Way
Karratha Light Industrial Estate
KARRATHA WA 6714
Phone +61 8 9185 2066
Fax
+61 8 9185 3588
www.sandvik.com
8 Formby Road,
DEVONPORT TAS 7310
Phone +61 3 6424 9797
Fax
+61 3 6424 4250
Lot 6 Blakefield Road,
MUSWELLBROOK, NSW 2333
Phone +61 2 6543 1929
Fax
+61 2 6542 5823
4/6 Hambledon Hill Road
Maison Deiu
SINGLETON, NSW 2330
Phone +61 2 6572 4105
Fax
+61 2 6542 4898
South Australia
Lot 9, Charlton Road,
OLYMPIC DAM SA 5725
Phone +61 8 8671 2907
Fax
+61 8 8671 1283
SMH/C/003/REVO-MAY 04

CATALOGUE MEDIUM TO HEAVY DUTY IDLER

Transcription

Similar documents

Aus der französischen Fremdenlegion.

How to Use the PowerPoint Template

Prox Mounts - Prime Controls Co

idler catalog - Superior Industries

Belt Conveyor Idlers - Continental Conveyor

Goodman-Hewitt Products