Prices SEPTEMBER 2016 SIROMER and JINMA PARTS

AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
Lifestyle machinery with low, fair price tags
59 Bindaree Road, Legana Tasmania 7277
Prices
OCTOBER 2016
Batteries and parts
Tractor Implements
Sundries
Workshop items
1
Email: sales@agtrek.com.au
www.agtrek.com.au
Mob. 0407 522 296
page 1
page 2
page 3
pages 4 & 5
Now available
+ & - TERMINAL
POSITIONS TO SUIT
Batteries for your tractor.
We have two sizes in stock
Model 80D26L 70 A/H
$126.50 incl. GST
and
Model 95D31L 90 A/H
$133.50 incl. GST
$126.50
$133.50
Need a battery for your car, boat, commercial vehicle or other application?
Ask for a quote ……..
SIROMER and JINMA PARTS
Many parts in stock …..If you have a question
regarding parts, don’t hesitate to ask.
AUGERS on special until sold
150mm (6”)
$165
230mm (9”)
$185
300mm (12”)
$225
450mm (18”)
$395
Gearbox connection suits
50.8mm (2”) with two pins/bolts
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
2
Lifestyle machinery with low, fair price tags
Prices OCTOBER 2016
0.9m TM90 Slasher (3’ suits mini tractors)
$1150
Post Hole Diggers are sold out but we still have augers
150mm auger
$165
230mm auger
$185
300mm auger
$225
450mm auger
$395
1.5m Finish Mower FM150
$1265
1.8m finish mower FM180
$1395
1.5m Mower $1265
1.8m Mower $1395
1.5m Box Blade $790
1.8m Grader Blade
with rippers $895
1.5m Box blade
$795
1.8m Grader Blade with RIPPERS
$895
0.95m Rotary Tiller
$1050
0.9m Slasher
$1150
Bale Spear
0.95m Rotary Tiller
$1050
Bale Spear
$199
LW7 3P/L backhoe (self contained) tractors 30hp-50hp
Overturn single furrow plough
$3990
$395
These prices are for CASH or DIRECT DEPOSIT.
$199
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
3
Lifestyle machinery with low, fair price tags
59 Bindaree Road, Legana Tasmania 7277
Prices
OCTOBER 2016
Email: sales@agtrek.com.au
www.agtrek.com.au
Mob. 0407 522 296
TRACTOR BACKHOES self contained for
3 p/l with hydraulic pump driven by PTO.
In stock LW7 3PL backhoe 35hp to 50hp
$3990 comes with 16” bucket
Cat 1 pins
WE CAN DELIVER AND ASSIST WITH
ATTACHMENT TO YOUR TRACTOR
Backhoes fit ALL tractors, old and new
Rear hydraulic remotes are not required
LUBRICANTS
20ltr GW 15W-40 engine oil
$95
20ltr GW 80W-90 gear lube
$107
20ltr GW Agritrans
$112
20ltr Gulf Western Superdraulic 32
$82
20ltr Gulf Western Superdraulic 46
$82
5ltr Valvoline 2 Stroke Motor oil
$23
450g cartridge Gulf Western
BlackTak Molyplex grease
$11
8.3-24 inner tube (JM204, 204S)
$52
6.0-12 inner tube (JM204, 204S) $17.50
6.00–12 Jinma/Siromer front wheel
complete with tire and tube
$105
Excellent hydraulics
and fabrication
PTO shaft
$90
Std. 35mm 6 spline each end to suit all medium
duty implements on tractors to around 50hp 1000mm closed length, easy to shorten
50mm chrome towball
2.5t
$6
50mm chrome towball
3.5t
$8
DELIVERY FEES within Tasmania for large items
are based on distance from Legana……
0km to 50km
$30
50km to 100km
$50
100km to 150km
$75
150km to 200km
$100
200km to 250km
$125
Small items will be delivered by Fastway couriers to your
door at cost.
PTO shaft with safety clutch
$190
Siromer and Jinma oil filters
Diesel fuel/Engine oil/Hydraulic
all $12
Suits 20hp, 25hp & 28hp tractors with
Laidong engine 2006 on……..
AGTREK was established in 2007 to provide
Tasmanians with access to good value equipment for
hobby farms, landscaping and property maintenance.
Lifestyle machinery with low, fair price tags
4
Prices OCTOBER 2016
Hand Shear for steel
Manual Steel shear
Multi-purpose Shear
Handy units for the small workshop or
hobby fabricator. Shears will need to be
fastened to a floor, or steel base with some
mass to it (if you intend to move it about).
Lever arm is included
Three models:
PBS-8
Maximum Capacities
Steel Round
Steel Square
Steel Flat
Steel Angle
Steel plate
Steel T
Net Weight of unit
(mm)
16
16
100 x 10
40 x 6
8
40 x 6
42kg
$279 incl. GST
PBS-7
Maximum Capacities
Steel Round
Steel Square
Steel Flat
Steel Angle
Steel plate
Steel T
Net Weight of unit
(mm)
22
20
90 x 14
60 x 6
10
60 x 6
98kg
$395 incl. GST
PBS-9
Maximum Capacities
Steel Round
Steel Square
Steel Flat
Steel Angle
Steel plate
Steel T
Net Weight of unit
(mm)
22
20
90 x 14
60 x 6
10
60 x 6
130kg
Max punch material thickness 8mm
Standard punch and die supplied is 16mm diameter
$595 incl. GST
PBS-9 combines PBS-7 and hole punching capacity