2007 laserlyte catalog

NEW FSL LASER SIGHTING SYSTEM
FSL-0650-140
This new ultra low profile laser sight utilizes DIGITAL CIRCUITRY with
a HI-DEFINITION laser module. This next generation laser gun sight
incorporates a visible low battery indicator. When your batteries are low
the laser dot pulses. The pulsing dot will still allow you to use the laser
for target acquisition and it extends your battery life by approximately
2.5 hours. The claw-type mounting system securely attaches the laser
to the rail or onto LaserLyte’s new adapter rails. The mount is precision
CNC-machined from aerospace grade aluminum for maximum strength,
precision and durability.
Taurus 24/7 Pistol With FSL Laser installed.
HK P2000-SK with FSL
FSL Laser Sight & Rear Activation Switch
Taurus 24/7 with FSL
Mossburg 500 with FSL
M4 with FSL
Laser System Specifications
Weight ....................... <1 ounce with batteries
Length......................... 1.2 inches (31.75mm)
Width.......................... 1 inch (25.4mm)
Height.......................... .375 inches (.953mm)
Laser Module.............. 650nm Hi-Definition
Power Output.............. 5mw continuous
Batteries..................... (4) 395 Silver Oxide Included
Battery Life................. Over 1.5 Hrs.
Beam Size.................... 2-3 in. @ 100 yds.
The versatility of the FSL Laser Sight allows it
to be mounted on virtually any firearm with a
rail mount or Picatinny rail, from sub compact
pistols, shotguns, AKs and M4s.
AK-47 with FSL
RAIL MOUNT ADAPTERS
FOR SELECT PISTOL MODELS
LaserLyte now introduces a rail adapter to fit on some very popular pistols: S&W Sigma VE,
Heckler & Koch USP, Bersa Thunder, Mini-Firestorm & Hi-Point. This adapter changes the
grooves on the receiver into a Picatinny/Weaver type rail, then you can mount any of our
clamping laser systems onto the rail. The laser systems are: LRS- Laser Rail System (see page
13) and the FSL- Laser System (see page 2).
The Adapters for the S&W Sigma VE, H&K USP & HK USP Compact are made out of a space
age polymer for increased strength and durability.
ADP-HKSP-140
Heckler & Koch USP
The Adapters for the Bersa Thunder, Mini-Firestorm, and the Hi-Point pistols are made out of
aerospace grade aluminum, with a hard anodized finish for increased strength and durability.
ADP-HKCP-140
Heckler & Koch
USP Compact
Rail Mount Adapter
ADP-BERS-140
ADP-SIGM-140
Bersa Thunder
(Also fits Mini-Firestorm)
Smith & Wesson Sigma VE
ADP-HIPT-140
Hi-Point
Use this adapter
with any round body
LaserLyte laser only
SHOTGUN TRI-RAIL MOUNTING SYSTEM
ADP-TRIR-140
Set up your tactical or home defense shotgun for maximum versatility and
low light performance with this new Tri-Rail Mounting System. Lightweight
and durable, this system positions three Picatinny rails at the front end of
the shotgun where flashlights and/or lasers are best located. Easily mounted
on the magazine tube of most popular 12-gauge pump action shotguns, the
Tri-Rail takes up under 1.5 inches of space ahead of the forearm. Made of
tough aircraft grade aluminum with a matte black anodized finish, the Tri-Rail
attaches in minutes with two machine screws.
Fits Any 1” Diameter Shotgun Magazine Tube.
Shown with FSL Laser.
•
•
•
•
•
•
•
•
Fits any 1 inch diameter shotgun magazine tube
Can be used with or without heat shield on shotguns
Can mount on magazine extension tubes or on stock tubes
Only takes up 1.4 inches of space
Aircraft grade aluminum.
Mount lasers or flashlights, works great with FSL
Perfect for home defense
1913 type rail system, Picatinny
Mossberg 500 shotgun with
Tri-Rail mount installed
UNIVERSAL STANDARD & SUPER-BRIGHT
LASER BORE ALIGNMENT KIT
Quickly sight in any rifle or pistol from .22 to .50 caliber with this single
universal kit (4 inch minimum barrel required). It comes complete with four
adapters to adjust across all these caliber ranges. Simple and very easy
to use, this Laser Bore Alignment Kit allows the adjustment of any scope
or iron sights to within a couple of inches of bull at up to 100 yards. It can
easily be packed and taken to camp for a quick check of sights.
Available in Standard 650nm and Super-Bright 635nm models, the internal
Laser module utilizes a special lens system to produce the smallest,
brightest and most concise dot for extremely accurate adjustment.
The patented (U.S. Patent No. 6,421,947) one-piece design Laser Bore
Tool is precision CNC machined from
aircraft aluminum and hardened with
a very durable finish to maintain
the precision surfaces. Each unit is
calibrated at the factory, utilizing
high-precision alignment tooling.
(12-20 gauge shotgun adapter also
available, see page 10.)
.22 caliber rifle barrel with laser bore tool installed.
Both kits come complete with four
adapters (covering any caliber from
.22 cal. to .50 cal.), carrying pouch,
batteries and instructions.
Comes complete with four adapters from
.22 to .50 caliber.
Taurus .44 Magnum Raging Bull pistol
with Laser Bore Tool installed
.22 caliber rifle with Laser Bore
Tool installed into the barrel
.416 caliber rifle with Laser Bore
Tool installed into the barrel
LBS-0006-140:
Alignment Kit
BAK-55NC-140:
Universal Laser Bore
Universal Super-Bright
Laser Bore Alignment Kit
Laser System Specifications
Weight..............................2.25 ounces
Length..............................6.5 inches
Module (Standard)...........650nm diode
Module (Super-Bright).....635nm diode
Range (Standard).............Up to 500 yards at night
Range (Super-Bright).......Up to 1000 yards at night
Power Output...................5mw
Batteries..........................(3) A-76 Included
Battery Life......................Over 1.5 Hrs.
Beam Size.........................2-3 inches @ 100 yds.
SUPER HI-PRECISION UNIVERSAL
LASER BORE SIGHTING SYSTEM
The Most Accurate Way
to Bore Sight Your Firearm
The Super Hi-Precision Laser bore sighting tool features a 635nm
Super-Bright Laser module that projects a beam that diverges
to approximately 2.5 inches at 100 yards. When the Laser dot is
projected on a target, it is used as the point-of-aim for adjusting the
riflescope reticle or iron sights. This system is designed to be simple,
fast and effective, and allows bore sighting accuracy of any firearm,
from .22 to .50 caliber (4 inch minimum barrel required).
LaserLyte engineers have developed a unique calibration system that
offers perfect alignment of the Laser to the central axis of the bore
for near-perfect bore sighting accuracy—even before firing the first
shot. The result is not only faster, easier sight-in sessions, but also
reduced ammunition consumption during the process. Bore sighting
can be done indoors or outdoors—even in broad daylight—at distances
from 25 feet to 30 yards.
.22 caliber rifle barrel with Hi-Precision Laser Bore tool installed
For increased versatility, a Shotgun Bore Adapter for 12 to 20 gauge
shotguns, slug guns, and Turkey Guns is included. (See page 10 for
full description)
The Laser Scope Leveler, which is also provided, integrates a bubble
level to provide a benchmark for “squaring” up your scope and rifle.
(See page 11 for full description)
PLB-0001-140
Comes Complete With:
•
•
•
•
•
•
•
•
•
635nm Laser
Stainless Steel Arbor
Brass Tapered Rotating Bushing
Laser Scope Leveler
12 – 20 Gauge Shotgun Bore Adapter
Daylight Laser Target
Delrin® Cal. Adapters with Brass Bushings
Set of Adapter Screws
(3) A-76 Batteries
PLB-0002-140
Due to the precision of the Hi-Precision Laser Bore Sighting
System, LaserLyte also offers a Double Set designed for checking
barrel regulation on double rifles. Includes two Hi-Precision Bore
Tools, Custom Case and Daylight Target.
.470 Nitro Express Double Rifle with double set PLB kit installed
For any firearm, from .22 to .50 Caliber
Laser System Specifications
Weight.......................... 2.25 ounces
Length.......................... 6.5 inches
Laser Module............... 635nm
Power Output............... 5mw
Batteries...................... (3) A-76 Included
Battery Life.................. Over 1.5 Hrs.
Beam Size..................... 2-3 inches @ 100 yds.
Shotgun Bore Adapter Included (see page 10)
Laser Scope Leveler Included (see page 11)
12– 20 GAUGE BORE ADAPTER &
.17­ – .22 CALIBER LASER BORE SIGHTER
12-20 GAUGE BORE ADAPTER
BAK-1220-300
Made from CNC-machined Dupont
Delrin®, the adapter holds the same
accuracy as the Laser bore tools and
will not mar your shotgun bore. Comes
complete with instructions.
This adapter works with the Universal Super-Bright Bore
Alignment Kit, the Hi-Precision Universal Laser Bore
Sighter and the Universal Laser Bore Sighter to allow the
quick and easy sighting-in of any 12–20 gauge shotgun,
slug guns and turkey guns.
.17­–.22 CALIBER
LASER BORE SIGHTER
LBS-1722-140
Each kit includes a Laser Bore Tool, 2 adapters,
batteries and instructions
10
Here’s a LaserLyte Laser Bore Sighting Kit
designed to work with the very popular .17
& .204 caliber firearms as well as air rifles.
Each kit includes 2 adapters to work with any
caliber from .17 to .22, including .204, etc.
(4 inch minimum barrel required).
Laser System Specifications
Weight.......................... <1.0 ounce
Length ......................... 4.7 inches
Laser Module............... 650nm
Power Output............... 5mw
Batteries ..................... (3) A-76 Included
Battery Life.................. Over 1.5 Hrs.
Beam Size..................... 2-3 inches @ 100 yds
LASER SCOPE LEVELER
SLA-0001-140
LaserLyte’s Laser Scope Leveler provides the ultimate in scope mounting
precision for the highest level of sight-in consistency. Designed to be used
with any LaserLyte Laser Bore Sighter, this unique accessory assures that
the reticle is “square” before you tighten the scope in its mounts.
Simply attach the Laser Scope Leveler to a Laser Bore Sighter, insert
in bore and you can match the horizontal crosshair to the projected
horizontal Laser beam.
The Laser Scope Leveler integrates a bubble level to provide
a benchmark for squaring up your scope and rifle.
The Line Generating Lens converts the bore
sighter’s precise Laser beam into an exact projected
horizontal line for aligning the reticle crosshairs.
Tighten scope mounts and then you’re ready for sight-in!
The scope’s windage and elevation adjustments require the reticle
crosshairs to be level–or square–for exact sight-in accuracy.
11
QD LASER SYSTEM FOR SELECT PISTOLS
WITH MOUNTING RAILS
For Glock, Beretta, HK P2000, Taurus 24/7, Springfield Armory
and Smith & Wesson SW99 Pistols With Mounting Rails
LaserLyte’s Quick Detachable Laser System attaches quickly and
securely to Glock, Beretta, Springfield Armory, Taurus, HK and Smith
& Wesson SW99 pistols with rails.
The QD mount utilizes two cross locking pins to securely attach
the Laser sight to the pistol’s mounting rails. The two cross locking
pins are operated by two buttons: when depressed they release the
Lasersight for quick removal. To install, depress buttons, slide the
mount on the mounting rails and release buttons.
The QD mount allows for great repeatability and will not
mar the finish of any firearm.
Precision CNC-machined from Dupont Delrin® (a high wear resistance
polymer), the QD mount allows for great repeatability and will not mar
the finish of any firearm.
This mount includes our universal Laser module (in Standard or SuperBright models) with an ambidextrous end cap slide switch. When
installed, the position of the switch is directly in front of the trigger
guard allowing for easy one-handed operation. The mount with Laser
weighs only 1.8 ounces.
Glock 19 with QD Laser
System installed
QDL-65GB-730: Standard Laser Fits Glock (with
rails), Beretta-92, Springfield Armory XD (excluding
sub-compact) & HK P2000
QDL-63GB-730: Super-Bright Laser Fits Glock
(with rails), Beretta-92, Springfield Armory XD
(excluding sub-compact) & HK P2000
QDL-65SW-730: Standard Laser Fits
Smith & Wesson SW99 & Taurus 24/7
QDL-63SW-730: Super-Bright Laser Fits
Smith & Wesson SW99 & Taurus 24/7
12
Simply depress the button on side of
mount to attach to rail.
Laser System Specifications
Weight................................. 1.8 ounces including batteries
Power Output....................... 5mw continuous
Module (Standard)............... 650nm diode
Module (Super-Bright)......... 635nm diode
Range (Standard)................. Up to 500 yards at night
Range (Super-Bright)........... Up to 1000 yards at night
Batteries............................. (3) A-76 batteries (included)
Battery Life.. ........................ Over 1.5 hours continuous
Beam Size............................ Approximately 3 inches at
100 yards
Adjustment.. ......................... 10 foot movement for windage
and elevation at 100 yards
UNIVERSAL RAIL-MOUNT LASER SYSTEM
Pistols:
Fits most pistols with an integrated Picatinny or Weaver-type rail system.
This Laser sight will also fit all adapters for pistols that provide a Picatinny
or Weaver-based rail system. Some pistols may require Laserlyte’s new
Adapter Rail (see page 4).
Long Guns:
Fits all rifles, carbines and shot guns with a Picatinny or
Weaver-based rail system.
HK P2000 with Universal Rail-Mount Laser installed.
LRS-0650-SSW: Laser Rail-Mount
System with Slide Switch
LaserLyte’s Universal Rail-Mount Laser Systems have been designed to fit
virtually all Weaver/Picatinny type handgun rails and mounting bases. They
are being offered in several configurations, including a wireless ambidextrous
slide switch, a 6-inch straight cord with pressure switch, and an extendable
curly cord with pressure switch. This Laser sight utilizes a unique claw-type
system that securely attaches the Laser sight to the pistol’s mounting rails.
LRS-0635-SSW: Super-Bright Laser
Rail-Mount System with Slide Switch
LRS-0650-CCW: Laser Rail-Mount
System with Curly Cord Switch
LRS-0635-CCW: Super-Bright Laser RailMount System with Curly Cord Switch
LRS-0650-SCS: Laser Rail-Mount System
with Straight Cord Switch
LRS-0635-SCS: Super-Bright Laser Rail-
Laser Rail-Mount System on
AR/M4 w/Curly Cord Switch
Mount System with Straight Cord Switch
Laser System Specifications
Rail-Mount Laser on HK
P2000-SK w/Slide Switch
Simply slide mount on pistol rail and tighten
mounting screws
Weight................................. 1.2 ounces including batteries
Length.. ................................ Less than 2.75 inches
Power Output....................... <5mw continuous
Module (Standard)............... 650nm diode
Module (Super-Bright)......... 635nm diode
Range (Standard)................. Up to 500 yards at night
Range (Super-Bright)........... Up to 1000 yards at night
Batteries............................. (3) A-76 batteries (included)
Battery Life.. ........................ Over 1.5 hours continuous
Beam Size............................ Approximately 3 inches at
100 yards
Adjustment.. ......................... 10 foot movement for windage
and elevation at 100 yards
13
UNIVERSAL RIFLE, SHOTGUN
LASER SYSTEM
RIFLE AND SHOTGUN
LASER SYSTEM
RLS-0650-140: Standard
RLS-0635-140: Super-Bright
MNT-0900-180: Mounting Kit Only
The Universal Rifle and Shotgun
Laser System is offered in both
our Standard 650nm Laser and the
Super-Bright 635nm Laser. Each
system includes 2 sets of clamps,
which allow the mounting of the
Laser to any 1/2- to 1-inch barrel
or magazine tube. The Laser comes
with a curly cord remote switch,
extendable from 10 to 36 inches.
Each Laser is easily adjusted for zero
with both a windage and elevation
screw. Each system comes complete
with Laser, batteries, mounting
hardware and instructions.
(for use with any round laser body)
Benelli Shotgun Shown with
Curly Cord Pressure Switch
Laser System Specifications
M4 Shown with Curly Cord
Pressure Switch
14
Weight.....................................1.2 ounces with batteries
Length.....................................less than 2-3/4 inches
Power Output..........................<5mw continuous
Module (Standard) .................650nm module
Module (Super-Bright)............635nm module
Range (Standard)....................Up to 500 yards at night
Range (Super-Bright)..............Up to 1000 yards at night
Batteries.................................(3) A-76 type (included)
Battery Life.............................Over 1.5 hours continuous
Beam Size................................Approx. 3 inches @ 100 yds.
Adjustment..............................10 foot movement for windage
and elevation @ 100 yards
PISTOL LASER AND
LASER BOW MOUNT SYSTEM
Each of our Universal Pistol Lasers features a two-screw windage
and elevation adjustment for easy zeroing. The Laser module
produces the maximum power output for a class IIIa product and
utilizes a special lens system to produce a very small, precise and
extremely bright dot.
The Universal Pistol Laser with Remote Switch is available in both
black and silver finish.
Shown with
Wireless Switch
Shown with Remote
Pressure Switch
PLR-0006-140: Black Remote
PLR-0006-090: Silver Remote
BLR-0007-140: Super-Bright Black Remote
BLR-0007-090: Super-Bright Silver Remote
Each Laser comes complete with 24 pre-shaped polymer inserts to
fit virtually all handguns. The remote pressure switch models come
with a self-adhesive mounting pad for placement of the switch.
CNC-machined from aircraft aluminum, it measures less than 2-3/4
inches long with the mount and weighs only 1.2 ounces.
PLW-0006-140: Black Wireless
PLW-0006-090: Silver Wireless
BLW-0007-140: Super-Bright Black Wireless
BLW-0007-090: Super-Bright Silver Wireless
LASER BOW MOUNT SYSTEM
This simple yet very effective Bow Laser System attaches to any stabilizer
from 1/2- to 1-inch in diameter. It is offered in both our Standard 650nm
Laser and the Super-Bright 635nm Laser. Each Laser comes with a remote
pressure switch attached to a 6-inch straight cord. This allows the placement
of the switch to the grip area of the riser for easy activation. The Laser
is easily adjusted for arrow impact at a specific yardage with the windage
and elevation screws. Each system comes complete with Laser, batteries,
mounting hardware and instructions.
BLS-0650-140: Standard
BLS-0635-140: Super-Bright
Mounts easily to bow stabilizers.
15
LASER BORE SIGHTER-DELUXE KIT
LBS-DLUX-140
Sighting in a rifle has never been simpler, faster
or more precise.
Comes complete with Laser Bore Sighter, Laser Scope
Leveler and 12-20 gauge Shotgun Adapter.
.22 to .50 Caliber
Laser Bore Sighter
The Deluxe Laser Bore Sighting Kit features a 650nm
laser module that projects a beam on the target, to allow
bore sighting accuracy of any firearm, from .22 to .50
caliber (4” minimum barrel required).
Rifle Barrel with Laser Bore Tool Installed
12 – 20 Gauge Shotgun Adapter
Laser Scope Leveler Line Generator
The Laser Scope Leveler Integrates
a bubble level to provide a benchmark
for squaring up your scope and rifle
Laser Scope Leveler
The Laser Scope Leveler, which integrates a bubble level
to provide a benchmark for squaring up your scope and
rifle, includes a line generating lens that converts the
bore sighter’s precise laser beam into an exact projected
horizontal line for aligning the reticle crosshairs.
12 to 20 Gauge Shotgun Adapter
Also, the 12-20 gauge bore adapter allows the quick and
easy sighting-in of any 12-20 gauge shotgun.
101 Airpark Road • Cottonwood, Arizona 86326 • USA • Phone 928.649.3201 • Fax 928.649.3970 • www.LaserLyte.com