Our Price - CR Hollands

Transcription

Our Price - CR Hollands
Your local stockist
Sandvik QD Deep Parting & Grooving System
Sandvik introduces a new parting off concept for deep grooves and long overhangs. Insert sizes from
2mm to 4mm plus a full grade and geometry program to suit most applications. We feature the double
ended standard parting off blades in this promotion, but shank type tool holders, reinforced, single ended
and through coolant tools are also available.
WIDTH
(MM)
2.0
2.0
2.5
2.5
3.0
3.0
4.0
BLADE
HEIGHT
25.9
31.9
25.9
31.9
25.9
31.9
31.9
SEAT
SIZE
E
E
F
F
G
G
H
MAX
REACH
26
26
33
33
36
60
60
BLADE
LENGTH
110
150
110
150
110
150
150
LIST
PRICE
£82.60
£82.60
£82.60
£82.60
£82.60
£82.60
£82.60
!
BUY 10 INSERTS
& GET A BLADE
FREE OF CHARGE
Insert Selection
!
!
These are the main insert
styles for parting off, there are
additional geometries and inserts for
specific applications including side turning,
for more info see catalogue C-2900:147 ENG/01.
ORDER
CODE
QD-NE-0200-0001-CF 1145
QD-NF-0250-0001-CF 1145
QD-NG-0300-0001-CF 1145
QD-NE-0200-0002-CM 1145
QD-NF-0250-0002-CM 1145
QD-NG-0300-0002-CM 1145
QD-NH-0400-0002-CM 1145
QD-LE-0200-0501-CO 1145
QD-RE-0200-0501-CO 1145
QD-LF-0250-0501-CO 1145
QD-RF-0250-0501-CO 1145
QD-LG-0300-0501-CO 1145
QD-RG-0300-0501-CO 1145
QD-LH-0400-0502-CO 1145
QD-RH-0400-0502-CO 1145
S
Inserts sold in 10’s and priced per each insert
!
SEAT
SIZE
E
F
G
E
F
G
H
E
E
F
F
G
G
H
H
GEOMETRY
APPLICATION
POSITIVE GEOM LOW FEED
POSITIVE GEOM LOW FEED
POSITIVE GEOM LOW FEED
FIRST CHOICE UNIVERSAL GEOM
FIRST CHOICE UNIVERSAL GEOM
FIRST CHOICE UNIVERSAL GEOM
FIRST CHOICE UNIVERSAL GEOM
OPTIMIZED GEOM LEFT HAND 5°
OPTIMIZED GEOM RIGHT HAND 5°
OPTIMIZED GEOM LEFT HAND 5°
OPTIMIZED GEOM RIGHT HAND 5°
OPTIMIZED GEOM LEFT HAND 5°
OPTIMIZED GEOM RIGHT HAND 5°
OPTIMIZED GEOM LEFT HAND 5°
OPTIMIZED GEOM RIGHT HAND 5°
OUR
PRICE
£6.95
£7.18
£7.70
£6.95
£7.18
£7.70
£8.19
£6.76
£6.76
£7.00
£7.00
£7.00
£7.00
£8.19
£8.19
01453 839600
ORDER
CODE
QD-NR2E26-21D
QD-NR2E26-25A
QD-NN2F33-21A
QD-NN2F33-25A
QD-NN2G36-21A
QD-NN2G60-25A
QD-NN2H60-25A
sales@crhollands.co.uk
www.crhollands.co.uk
October – December 2014
sales@crhollands.co.uk
www.crhollands.co.uk
01453 839609
2
Sandvik New Turning Grades 4325
and 4315 For Steel
4325 is the first choice P25 grade for steel turning from roughing
to finishing, continuous and interrupted cuts in both wet and dry
applications. Grade 4325 has a wide application area, gives
improved wear resistance and has a tough substrate to withstand
difficult operations.
4315 is a P15 grade for high metal removal rates, it withstands
high temperatures, allowing high speed cutting and a longer time
in cut which is ideal for secure unmanned high volume production.
A comprehensive range of insert styles and chip-breakers are
available.
We list a selection below but a full list is available in catalogue
C-2900:147 ENG/01 please ask for a copy.
ORDER
CODE
CCMT060204-PF
CCMT060208-PM
CCMT09T304-PF
CCMT09T308-PM
DCMT070204-PF
DCMT070208-PM
DCMT11T304-PF
DCMT11T308-PM
VBMT160404-PF
VBMT160408-PM
CNMG120404-PF
CNMG120408-PM
CNMG120412-PR
DNMG150604-PF
DNMG150608-PM
DNMG150612-PR
WNMG060404-PF
WNMG060408-PM
WNMG060412-PR
WNMG080404-PF
WNMG080408-PM
WNMG080412-PR
LIST
PRICE
£6.38
£6.38
£7.42
£7.42
£6.38
£6.38
£8.56
£8.56
£11.95
£11.95
£9.24
£9.24
£9.24
£12.70
£12.70
£12.70
£8.10
£8.10
£8.12
£10.15
£10.15
£10.15
OUR
PRICE
£4.47
£4.47
£5.19
£5.19
£4.47
£4.47
£5.99
£5.99
£8.36
£8.36
£6.47
£6.47
£6.47
£8.89
£8.89
£8.89
£5.67
£5.67
£5.67
£7.10
£7.10
£7.10
U
W
o
01453 839600
Walter Tiger-Tec Silver WMP20S
WMP20S is a universal grade for stainless steel and alloy
steel offering a good level of wear resistance due to its
TigerTec® silver CVD coating.
It is suited to continuous cutting up to medium
interrupted cuts.
ORDER
CODE
CCMT060204-FM4
CCMT060208-FM4
CCMT09T304-FM4
DCMT070204-FM4
DCMT11T304-FM4
DCMT11T308-FM4
TCMT110204-FM4
TCMT16T304-FM4
TCMT16T308-FM4
CNMG120404-NM4
CNMG120408-NM4
CNMG120412-NM4
DNMG110404-NM4
DNMG110408-NM4
DNMG150604-NM4
DNMG150608-NM4
DNMG150612-NM4
WNMG060404-NM4
WNMG060408-NM4
WNMG080404-NM4
WNMG080408-NM4
LIST
PRICE
£5.60
£5.60
£5.60
£5.55
£7.80
£7.80
£6.20
£8.05
£8.05
£8.15
£8.15
£8.15
£8.60
£8.60
£11.35
£11.35
£11.35
£7.20
£7.20
£9.10
£9.10
OUR
PRICE
£2.80
£2.80
£2.80
£2.78
£3.90
£3.90
£3.10
£4.03
£4.03
£4.08
£4.08
£4.08
£4.30
£4.30
£5.68
£5.68
£5.68
£3.60
£3.60
£4.55
£4.55
A universal cutter for shoulder and slot milling, ramping, plunging,
and peripheral milling.
With through coolant this tool has a light cutting action due to the
insert geometries coupled with its notch design which reduces noise
and vibration when plunging. A comprehensive grade and geometry
A universal cutter for shoulder and slot milling, ramping, plunging, and peripheral milling.
INSERT ORDER
Wprogram make this tool ideal for most applications.
CODE
Type A with plain shank, Type B with Weldon Shank.
XDKT 070304SR-F50 CTP1235
a
yp
p
yp
ORDER
CODE
C211.10.R.01-07-A-20
C211.12.R.02-07-A-20
C211.16.R.03-07-A-32-165
C211.16.R.04-07-A-25
C211.16.R.04-07-B-25
C211.20.R.04-07-A-40-200
C211.20.R.05-07-A-25
C211.20.R.05-07-B-25
C211.25.R.05-07-A20-50-225
C211.25.R.06-07-A20-32
C211.25.R.06-07-B20-32
C211.32.R.08-07-A25-40
C211.32.R.08-07-B25-40
DIA
SHANK
LGTH
TEETH
10
12
16
16
16
20
20
20
25
25
25
32
32
10
12
16
16
16
20
20
20
20
20
20
25
25
61
66.5
165
74.5
74.5
200
77
77
225
84
84
98
98
1
2
3
4
4
4
5
5
5
6
6
8
8
OFFER
PRICE*
£50
£50
£50
£50
£50
£50
£50
£50
£50
£50
£50
£50
£50
XDKT 070304SR-F50 CTP2235
XDKT 070304SR-F50 SR226+
XDKT 070304SR-M50 CTP1235
XDKT 070304SR-M50 CTP2235
XDKT 070304SR-M50 SR226+
XDKT 070308SR-F50 CTP1235
XDKT 070308SR-F50 CTP2235
XDKT 070308SR-F50 SR226+
XDKT 070308SR-M50 CTP1235
XDKT 070308SR-M50 CTP2235
XDKT 070308SR-M50 SR226+
XDKT 070304FR-F20 CTW4615
XDKT 070308FR-F20 CTW4615
XDKT 070304ER-F40 CTC5235
XDKT 070304ER-F40 CTC5240
XDKT 070308ER-F40 CTC5235
XDKT 070308ER-F40 CTC5240
ISO /
APPLICATION
P35 M30
P40 M40
P25 M25 K20
P35 M30
P40 M40
P25 M25 K20
P35 M30
P40 M40
P25 M25 K20
P35 M30
P40 M40
P25 M25 K20
K15 (C. IRON)
K15 (C. IRON)
M35 (HRSA)
M40 (Ti)
M35 (HRSA)
M40 (Ti)
OUR
PRICE
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£5.50
£6.32
£6.32
£6.73
£6.73
£6.73
£6.73
INSERT ORDER
CODE
XDKT 11T302FR-F20 CTW4615
XDKT 11T304FR-F20 CTW4615
XDKT 11T308FR-F20 CTW4615
XDKT 11T320FR-F20 CTW4615
XDKT 11T304ER-F40 CTC5235
XDKT 11T304ER-F40 CTC5240
XDKT 11T308ER-F40 CTC5235
XDKT 11T308ER-F40 CTC5240
XDKT 11T312ER-F40 CTC5235
XDKT 11T312ER-F40 CTC5240
XDKT 11T316ER-F40 CTC5235
XDKT 11T316ER-F40 CTC5240
ISO /
APPLICATION
K15 (C. IRON)
K15 (C. IRON)
K15 (C. IRON)
K15 (C. IRON)
M35 (HRSA)
M40 (Ti)
M35 (HRSA)
M40 (Ti)
M35 (HRSA)
M40 (Ti)
M35 (HRSA)
M40 (Ti)
OUR
PRICE
£8.39
£8.39
£8.39
£8.39
£8.81
£8.81
£8.81
£8.81
£8.81
£8.81
£8.81
£8.81
These cutters take XDKT 07 inserts. *offer price valid when 20 inserts purchased at same time
ORDER
CODE
C211.12.R.01-11-B-20
C211.16.R.02-11-A15-32-165
C211.16.R.02-11-A-25
C211.16.R.02-11-A-32-165
C211.16.R.02-11-B-25
C211.20.R.02-11-A19-40-200
C211.20.R.02-11-A-25
C211.20.R.02-11-A-40-200
C211.20.R.02-11-B-25
C211.20.R.03-11-A-25
C211.20.R.03-11-A-32-165
C211.20.R.03-11-B-25
C211.25.R.02-11-A-50-225
C211.25.R.03-11-A24-50-225
C211.25.R.03-11-A-32
C211.25.R.03-11-A-50-225
C211.25.R.03-11-B-32
C211.25.R.04-11-A-32
C211.25.R.04-11-A-40-165
C211.25.R.04-11-B-32
DIA
SHANK
LGTH
TEETH
12
16
16
16
16
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
16
15
16
16
16
19
20
20
20
20
20
20
25
24
25
25
25
25
25
25
75
165
75
165
75
200
77
200
77
77
165
77
225
225
90
225
90
90
165
90
1
2
2
2
2
2
2
2
2
3
3
3
2
3
3
3
3
4
4
4
OFFER
PRICE*
£30
£30
£30
£30
£30
£40
£40
£40
£40
£40
£40
£40
£50
£50
£50
£50
£50
£50
£50
£50
Inserts with 2.0, 2.5 & 3.2mm rad also available – please ask
sales@crhollands.co.uk
www.crhollands.co.uk
Ceratizit Maximill C211
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
3
BUY 20
INSERTS
& GET A CUTTER
FOR £30, £40 OR £50
01453 839600
These cutters take XDKT 11 inserts. *offer price valid when 20 inserts purchased at same time
W
o
01453 839609
4
MA Ford Series 893 HSS TiN 3 Flute 90° Countersink Set
Comprising 6.3mm, 8.3mm, 10.4mm, 12.4mm, 16.5mm & 20.5mm diameter tools.
Suitable for most materials.
Order Code:
MAFORD-893 6PC 90 DEG
sales@crhollands.co.uk
www.crhollands.co.uk
Our Price: £37.07
C
S
C
SPrecitool
90°
Chamfering Cutter
Europa Drill & Tap Set
M3-M12
4 flute Alcrona coated solid carbide, weldon
style shank.
Ideal for chamfering and deburring in most
materials.
7 taps from M3 – M12 and
TiN coated tapping drills in
sturdy box. Available in spiral
point and sprial flute
DIA
4MM
6MM
8MM
10MM
12MM
ORDER CODE
PREC-178725-4
PREC-178725-6
PREC-178725-8
PREC-178725-10
PREC-178725-12
PRICE
£14.20
£15.63
£18.48
£24.61
£39.80
ORDER CODE
UNIGOLDSP1
UNIGOLDSF1
01453 839600
Sandvik Coromill Milling Cutter Bodies
We offer a 25% discount on Sandvik Coromill cutter
bodies in the following styles:
390 & 490 for 90° shoulder milling, 245 & 345 for 45° face
milling, 419 for high feed milling and 200 & 300 for face/profile
milling with round inserts.
All cutters have inserts and geometries to suit
a wide range of materials including Steel,
Stainless steel, HRSA’s, cast iron and
non-ferrous metals.
TYPE
SPIRAL POINT
SPIRAL FLUTE
OUR PRICE
£39.99
£39.99
Din 471 full form right hand inserts.
3/8” IC size fits 3ER/16ER ISO threading tool holders.
Inserts priced each but sold in 2’s.
ORDER
CODE
m
d1
W
t1
t
OUR
PRICE
3ER1.10C-D471-0.35 VKX
3ER1.10C-D471-0.40 VKX
3ER1.30C-D471-0.50 VKX
3ER1.30C-D471-0.55 VKX
3ER1.60C-D471-0.70 VKX
3ER1.60C-D471-0.85 VKX
3ER1.60C-D471-1.00 VKX
3ER1.85C-D471-1.00 VKX
3ER1.85C-D471-1.25 VKX
3ER2.15C-D471-1.50 VKX
1.10
1.10
1.30
1.30
1.60
1.60
1.60
1.85
1.85
2.15
15
16-17
18-22
24-26
28-30
32-34
35
36-38
40-48
50-63
1.19
1.19
1.39
1.39
1.69
1.69
1.69
1.94
1.94
2.24
0.33
0.36
0.44
0.45
0.60
0.75
0.85
0.85
1.10
1.35
0.35
0.40
0.50
0.55
0.70
0.85
1.00
1.00
1.25
1.50
£21.81
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
Vardex O Ring Grooving inserts for Bores
Din 472 full form right hand inserts.
3/8” IC size fits 3IR/16IR ISO threading tool holders.
Inserts priced each but sold in 2’s.
ORDER
CODE
m
d1
W
t1
t
OUR
PRICE
3IR1.10C-D472-0.50 VKX
3IR1.30C-D472-0.60 VKX
3IR1.30C-D472-0.70 VKX
3IR1.30C-D472-0.85 VKX
3IR1.60C-D472-0.85 VKX
3IR1.60C-D472-1.00 VKX
3IR1.85C-D472-1.25 VKX
3IR2.15C-D472-1.50 VKX
1.10
1.30
1.30
1.30
1.60
1.60
1.85
2.15
18-22
24-26
28-30
31-34
34
35-38
40-48
50-63
1.19
1.39
1.39
1.39
1.69
1.69
1.94
2.24
0.36
0.44
0.60
0.75
0.75
0.85
1.10
1.35
0.50
0.60
0.70
0.85
0.85
1.00
1.25
1.50
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
£21.84
Vardex ISO Threading Toolholders (External)
Universal lay down threading for 3ER & 16ER inserts
Compatible with most other systems.
TOOL
LENGTH
100
128
153
173
OUR
PRICE
£60.62
£65.76
£72.21
£81.91
Shim YE3M-1.5N required for grooving inserts
Vardex ISO Threading Bars (Internal)
Universal lay down threading for 3ER &16IR inserts. Compatible with most other systems.
p
ORDER
CODE
NVR13-3
NVR16-3
AVR20-3
AVR25-3
AVR32-3
y
SHANK
DIA
20
20
20
25
32
NECK
DIA
12.7
16
20
25
32
Shim YI3M-1.5N required for grooving inserts
LENGTH
180
180
180
250
250
MIN
BORE
17
20
24
29
36
OUR
PRICE
£64.47
£60.60
£65.76
£72.23
£90.27
01453 839600
ORDER
CODE
AL16-3
AL20-3
AL25-3
AL32-3
sales@crhollands.co.uk
www.crhollands.co.uk
Vardex O Ring Grooving inserts for shafts
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
5
A
sales@crhollands.co.uk
www.crhollands.co.uk
01453 839609
6
A
ALTiN coating & 142° point angle, external
coolant required. Available in 0.1mm
increments from 3mm to 16mm. Suitable for
A
stainless steels and other difficult materials.
HPDCR Twister Performance
Carbide Drills 5XD with through coolant holes.
SIZE
3mm to 6mm
6.1mm to 8mm
8.1mm to 10mm
10.1mm to 12mm
12.1mm to 14mm
14.1mm to 16mm
ALTiN coating & 142° point angle. Available in 0.1mm
increments from
SIZE
OUR PRICE
3mm to 16mm.
3mm to 4mm
£34.84
4.1mm
to
6mm
£37.42
Suitable
for
A
6.1mm
to
8mm
£41.41
stainless steels
8.1mm to 10mm
£47.49
and other difficult 10.1mm to 12mm
£69.37
materials.
12.1mm to 14mm
£93.34
14.1mm to 16mm
OUR PRICE
£24.45
£24.80
£27.49
£41.07
£54.04
£70.31
£115.09
A
TuffCut GT2 Standard Length
Carbide Endmills
TuffCut GT3 Standard Length
Carbide Endmills
A 2 flute centre cutting high performance cutter
with 55° helix.
Particularly suited to aluminums and plastics.
A
The shank and cutter diameter are the same size.
A 3 flute centre cutting high performance cutter
with 55° helix.
Particularly suited to aluminums and plastics.
The shank and cutter diameter are the same size.
DIA
01453 839600
HPDSR Twister Performance
Carbide Drills 5XD
3mm
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
20mm
ORDER
CODE
GT2 0300
GT2 0400
GT2 0500
GT2 0600
GT2 0800
i
GT2 1000
GT2 1200
GT2 1400
GT2 1600
GT2 2000
FLUTE
LENGTH
12
15
20
20
20
25
25
30
35
40
OVERALL
LENGTH
51
51
57
64
64
73
73
84
93
105
OUR
PRICE
£13.41
£13.41
£17.07
£19.50
£24.38
£34.13
£43.88
£53.63
£75.57
£124.33
DIA
3mm
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
20mm
i
ORDER
CODE
GT3 0300
GT3 0400
GT3 0500
GT3 0600
GT3 0800
GT3 1000
GT3 1200
GT3 1400
GT3 1600
GT3 2000
FLUTE
LENGTH
12
15
20
20
20
25
25
30
35
40
OVERALL
LENGTH
51
51
57
64
64
73
73
84
93
105
OUR
PRICE
£14.63
£14.63
£19.50
£21.94
£26.82
£36.57
£46.32
£56.07
£78.01
£126.77
The new A Series tap has a variable lead flute for improved chip evacuation and a multi-layered V coating for
longer tool life. It is particularly suited to stainless steels. These powder metallurgy HSS taps offer
prolonged tool life at faster cutting speeds. Also in Metric Fine, UNC & UNF thread forms.
TAP
SIZE
M3
M4
M5
M6
M8
M10
M12
M14
M16
PITCH
MM
0.5
0.7
0.8
1.0
1.25
1.50
1.75
2.0
2.0
SHANK
DIA
4
5
5.5
6
6.2
7
8.5
10.5
12.5
SQUARE
SIZE
3.2
4
4.5
4.5
5
5.5
6.5
8
10
O/ALL
LENGTH
46
52
60
62
70
75
82
88
95
LIST
PRICE
£18.83
£19.40
£19.81
£19.98
£23.99
£29.23
£36.88
£43.47
£51.09
OUR
PRICE
£15.06
£15.52
£15.85
£15.98
£19.19
£23.38
£29.50
£34.78
£40.87
OSG A-POT Spiral Point Machine Taps For Stainless Steel & Steel
The new A Series tap has a variable lead flute for improved chip evacuation and a multi-layered V coating for
longer tool life. It is particularly suited to stainless steels. These powder metallurgy HSS taps offer
prolonged tool life at faster cutting speeds. Also in Metric Fine, UNC & UNF thread forms.
TAP
SIZE
M3
M4
M5
M6
M8
M10
M12
M14
M16
PITCH
MM
0.5
0.7
0.8
1.0
1.25
1.50
1.75
2.0
2.0
SHANK
DIA
4
5
5.5
6
6.2
7
8.5
10.5
12.5
SQUARE
SIZE
3.2
4
4.5
4.5
5
5.5
6.5
8
10
O/ALL
LENGTH
46
52
60
62
70
75
82
88
95
LIST
PRICE
£18.26
£18.75
£19.24
£19.49
£23.33
£28.49
£35.86
£42.74
£50.27
OUR
PRICE
£14.61
£15.00
£15.39
£15.59
£18.66
£22.79
£28.69
£34.19
£40.22
sales@crhollands.co.uk
www.crhollands.co.uk
OSG A-SFT Spiral Flute Machine Taps For Stainless Steel & Steel
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
7
01453 839600
F
F
01453 839609
8
Steel Shank Toolholders
For ISO negative rake inserts
95 degree approach, right
hand for CNMG inserts
ORDER CODE
ECLNR-2020K12
ECLNR-2525M12
ECLNR-3232P12
OUR PRICE
£27.00
£30.00
£36.00
For ISO positive rake inserts
95 degree approach, right
hand for CCMT inserts
ORDER CODE
SCLCR0808K06
SCLCR1010K06
SCLCR1212K09
SCLCR1616K09
SCLCR2020K09
SCLCR2525M09
sales@crhollands.co.uk
www.crhollands.co.uk
LENGTH
125
150
170
LENGTH
125
125
125
125
125
150
OUR PRICE
£18.00
£18.00
£20.00
£23.00
£26.00
£29.00
ORDER CODE
EDJNR-2020K15
EDJNR-2525M15
LENGTH
150
170
OUR PRICE
£27.00
£30.00
For ISO positive rake inserts
93 degree approach, right
hand for DCMT inserts
ORDER CODE
SDJCR0808K07
SDJCR1010K07
SDJCR1212K07
SDJCR1616K11
SDJCR2020K11
SDJCR2525M11
LENGTH
125
125
125
125
125
150
OUR PRICE
£18.00
£18.00
£20.00
£23.00
£26.00
£29.00
ORDER
O
RDER CODE
CODE
S
VJBR1616K16
SVJBR1616K16
SVJBR2020K16
S
VJBR2020K16
SVJBR2525M16
SVJBR2525M16
!
!
LENGTH
125
125
150
OUR
PRICE
O
UR P
RICE
£23.00
.00
£26.00
.00
£29.00
.00
For ISO negative rake inserts
95 degree approach, right
hand for WNMG inserts
ORDER CODE
EWLNR-2020K06
EWLNR-2525M06
EWLNR-2020K08
EWLNR-2525M08
EWLNR-3232P08
LENGTH
125
150
125
150
170
OUR PRICE
£27.00
£30.00
£27.00
£30.00
£36.00
Steel Shank Boring Bars
For ISO negative rake inserts
95 degree approach, right hand for CNMG inserts
BAR DIA
20
25
32
40
50
MIN BORE
25
32
40
50
63
LENGTH
200
200
350
300
500
ORDER CODE
S20R-MCLNR12
S25R-MCLNR12
S32U-ECLNR12
S40T-ECLNR12
S50Y-ECLNR12
OUR PRICE
£40.00
£46.00
£75.00
£90.00
£115.00
For ISO negative rake inserts
95 degree approach, right hand for WNMG inserts
BAR DIA
20
25
32
40
50
MIN BORE
25
32
40
50
63
LENGTH
200
200
350
400
500
ORDER CODE
S20R-EWLNR06
S25R-EWLNR08
S32U-EWLNR08
S40V-EWLNR08
S50Y-EWLNR08
OUR PRICE
£45.00
£53.00
£75.00
£90.00
£115.00
MCLNR style have traditional single clamp not illustrated
For ISO positive rake centre screw inserts 93 Degree
approach, right hand style for DCMT inserts
01453 839600
For ISO positive rake inserts
93 degree approach, right
hand for VBMT inserts
For ISO negative rake inserts
93 degree approach, right
hand for DNMG inserts
BAR DIA
10
12
16
20
25
MIN BORE
13MM
16MM
20MM
25MM
32MM
O’ALL LNGTH
125MM
150MM
180MM
200MM
200MM
ORDER CODE
S10K-SDUCR07
S12M-SDUCR07
S16Q-SDUCR07
S20R-SDUCR11
S25R-SDUCR11
OUR PRICE
£16.00
£16.00
£24.00
£30.00
£38.00
For ISO positive rake centre screw inserts 95 degree
approach, right hand style for CCMT inserts
BAR DIA
8
10
12
16
20
25
For ISO positive rake centre screw inserts 91 Degree
approach, right hand style for TCMT inserts
BAR DIA
10
12
16
20
25
MIN BORE
12MM
14MM
18MM
22MM
32MM
O’ALL LNGTH
125MM
150MM
180MM
200MM
200MM
ORDER CODE
S10K-STFCR11-12
S12M-STFCR11-14
S16Q-STFCR11-18
S20S-STFCR16-22
S25R-STFCR16
OUR PRICE
£22.00
£22.00
£28.00
£32.00
£40.00
MIN BORE
10MM
12MM
14MM
18MM
22MM
32MM
LENGTH
125MM
150MM
180MM
200MM
200MM
125MM
ORDER CODE
S08K-SCLCR06-10
S10K-SCLCR06-12
S12M-SCLCR06-14
S16Q-SCLCR09-18
S20S-SCLCR09-22
S25R-SCLCR09
OUR PRICE
£16.00
£16.00
£16.00
£24.00
£30.00
£38.00
BAR DIA
8
10
12
16
MIN BORE
10MM
12MM
14MM
14M
M
18MM
18M
M
LENGTH
125MM
150MM
180MM
180M
M
200MM
200M
M
ORDER CODE
C08K-SCLCR06-10
C10M-SCLCR06-12
C12Q-SCLCR06-14
C1
2Q-SCLCR06-14
C16R-SCLCR09-18
C1
6R-SCLCR09-18
OUR PRICE
£45.00
£45.00
££56.00
56.00
££85.00
85.00
Carbide Shank Boring Bars
For ISO positive rake centre screw inserts 93° approach, right hand style for DCMT inserts
BAR
BA
R DIA
D IA
10
12
16
MIN B
MIN
BORE
ORE
13MM
13M
MM
16MM
16M
MM
20MM
20M
MM
LENGTH
LENGTH
150MM
180MM
18
0MM
200MM
ORDER
OR
DE
ER C
CODE
ODE
C10M-SDUCR07
C1
0MM-SDUCR07
C12Q-SDUCR07
C1
2Q-SDUCR07
C16R-SDUCR07
C1
6R-SDUCR07
OUR P
PRICE
R IC E
££45.00
45 00
45.
££56.00
56.00
££85.00
85.00
Headed Sleeves For Boring Bars
Precision ground reduction bush to mount bar in turret.
Form A is open slot, form B is with grub screws
p
ORDER CODE
DIA X BORE X LGTH
SLEEVE 20 X 8 X 50 B
SLEEVE 20 X 10 X 50 B
SLEEVE 20 X 12 X 50 A
SLEEVE 25 X 6 X 50 B
SLEEVE 25 X 8 X 50 B
SLEEVE 25 X 10 X 50 B
SLEEVE 25 X 12 X 50 B
SLEEVE
50 A
A unique25setX 16
of Xpopular
SLEEVE
25
X
20
X
50 A
A
set of popular
I unique
SLEEVE 32 X 6 X 58 B
I SLEEVE 32 X 8 X 47 B
SLEEVE 32 X 10 X 47 B
SLEEVE 32 X 12 X 47 B
SLEEVE 32 X 16 X 60 A
SLEEVE 32 X 20 X 60 A
SLEEVE 32 X 25 X 60 A
SLEEVE 40 X 6 X 55 B
SLEEVE 40 X 8 X 55 B
SLEEVE 40 X 10 X 55 B
SLEEVE 40 X 12 X 55 B
SLEEVE 40 X 16 X 80 A
SLEEVE 40 X 20 X 80 A
SLEEVE 40 X 25 X 80 A
SLEEVE 40 X 32 X 80 A
g
OUR
PRICE
£14.00
£14.00
£14.00
£31.00
£16.00
£16.00
£16.00
£16.00 coated
VTX
£16.00 coated
VTX
£32.00
£18.00
£18.00
£18.00
£18.00
£18.00
£18.00
£35.00
£20.00
£20.00
£20.00
£20.00
£20.00
£20.00
£20.00
Note: length is measured to under the head.
inserts offering great v
inserts offering great v
sales@crhollands.co.uk
www.crhollands.co.uk
For ISO positive rake centre screw inserts 95° approach, right hand style for CCMT inserts
pp
g
y
01453 839600
Carbide Shank Boring Bars
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
9
01453 839609
10
Vardex VRX Grade, The NEW Coated ISO Threading Insert
Introductory 40% discount on size 2 and 3ER/IR inserts.
DThe premium submicron grade VRX is an AlTin PVD coated insert
giving improved wear resistance at higher speeds and improved
resistance to plastic deformation which give better and longer lasting
thread accuracy. A multi-purpose grade for steels up to 55HRc, stainless
steels, HRSA’s and non-ferrous metals. Sold in multiples of 2
inserts, request your thread pitch/TPI and state if external
List Price: £14.09 each
or internal inserts.
Our Price: £8.45 each
D
Full range of inserts also available in 10’s please ask.
sales@crhollands.co.uk
www.crhollands.co.uk
ISO Threading Toolholders (External)
Universal lay down threading for 16ER inserts
Compatible
other
systems
Full range of with
inserts most
also available
in 10’s
please ask.
ORDER CODE
SER-1616K16
SER-2020K16
SER-2525M16
SER-3232P16
SER-2525M22
LENGTH
125
125
150
170
150
OUR PRICE
£28.00
£30.00
£34.00
£40.00
£34.00
ISO Threading Bars (Internal)
Universal lay down threading for 16IR inserts
Compatible with most other systems.
ORDER
CODE
SINR-1616-16
SINR-2420S-16
SINR-3025S-16
SINR-3732S-16
SINR-3025S-22
DIA
LENGTH
16
20
25
32
25
150
180
200
250
200
MIN
BORE
16
24
30
37
30
OUR
PRICE
£28.00
£30.00
£35.00
£44.00
£38.00
01453 839600
Bison 8811 60° Running Centre
A heavy duty precision centre
with 60° steel point.
ORDER
CODE
BIS-8811-1-I
BIS-8811-2-I
BIS-8811-3-I
BIS-8811-4-I
BIS-8811-5-I
BIS-8811-6-I
BODY
DIA
38
40
56
64
85
130
MORSE
TAPER
1
2
3
4
5
6
MAX
KG
100
180
450
1000
1900
3700
MAX
RPM
5000
5000
4000
3000
2500
2000
OUR
PRICE
£60.12
£75.60
£88.29
£112.68
£164.79
£360.45
Bison 8824 Extended Point Running Centre
Standard body with an extended point for
improved access.
Tapers down from 60° to 30° at point.
ORDER
CODE
BIS-8824-2
BIS-8824-3
BIS-8824-4
BIS-8824-5
A
BIS-8824-6
A
BODY
DIA
44
48
60
75
90
MORSE
TAPER
2
3
4
5
6
NOSE DIA &
LENGTH (MM)
24 – 38.5
28 – 47.5
38 – 66.5
50 – 86.5
60.5 – 94.5
MAX
KG
90
180
350
600
1300
MAX
RPM
8000
6000
4500
4000
3000
OUR
PRICE
£110.61
£117.63
£138.33
£154.62
£272.70
Q8 Haydn Hydraulic Oil 20 Litres
High quality oil with good anti-wear, anti-rust and
anti-corrosion properties
GRADE
32
46
68
ORDER CODE
Q8-HAYDN 32-020
Q8-HAYDN 46-020
Q8-HAYDN 68-020
PRICE
£37.20
£37.20
£37.20
Q8 Dynobear 68 Slideway
Oil 20 Litres
Developed for the machine tool industry,
this oil has good wear resistance
properties and contains additives to reduce
friction and eliminate sideway judder.
Quakercool Formula 8600
A system cleaner with a highly effective
bactericide-fungicide. It generally works with
a concentration level
of 2% but up to 5%
can be used in
situations where
condition
of the old coolant
is particularly poor.
Order Code:
QUAKERCOOL 8600-005
Our Price: £26.00
Order Code:
QUAKERCOOL 8600-020
Our Price: £89.00
Our Price
£39.96
Order Code: Q8 DYNOBEAR 68-020
Peerless OG Plus Chuck
Grease (400g Cartridge)
A high temperature extreme
pressure grease, ideal for wet
conditions. It has excellent
resistance to washout, offers
great rust & corrosion
protection as well as adhesive
properties to protect rotating
parts. It can be applied by
handgun where necessary.
Order Code:
GREASE-PEERLESS OG+ 400G
Our price:
£6.75
sales@crhollands.co.uk
www.crhollands.co.uk
A high performance semi-synthetic waterA based cutting fluid for all materials
& applications. Astro-Sol XL is biologically hard, resisting the microorganisms that restrict sump life in other water based cutting fluids. It is
suitable in both soft and hard water areas and performs well without the
need for softeners, hardeners or anti-foaming additives.The product has a
OUR
low odour and is kind to the skin.
ORDER CODE
SIZE
PRICE
Available in 3 pack sizes to suit all size
ASTRO-SOL-25
25 LTR
£85.00
workshops. The 60 & 208 Litre sizes can ASTRO-SOL-60
60 LTR
£199.00
ASTRO-SOL-208
208 LTR
£680.00
accept standard mixer units.
01453 839600
Monroe Astro-Sol XL Soluble Cutting Oil
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
11
sales@crhollands.co.uk
www.crhollands.co.uk
01453 839609
12
Bison Quick Acting Vice
Clamping is achieved in single
rotary movement of lever, Vee
in fixed jaw to hold round
ORDER
components.
CODE
BIS-6542-80
JAW
WIDTH
80
JAW
OPENING
80
OUR
PRICE
£153.23
BIS 6542-0
100
100
£203.11
Bison 6512 Machine Vice
A sturdy plain base machine vice for milling
and drilling. Designed with lead screw
protected from swarf etc. Hardend
ground Jaws with grooves.
!
(Swivel based also available).
ORDER
CODE
BIS-6512-100
BIS-6512-125
BIS-6512-160
BIS-6512-200
BIS-6512-250
JAW
WIDTH
100
125
160
200
250
JAW
OPENING
80
95
125
160
200
OUR
PRICE
£157.40
£213.02
£306.19
£422.90
£752.72
O
i
!
Precision Machine Vice
A substantial vice designed to withstand the forces of modern C
O
A substantial vice designed to withstand the forces of
modern CNC milling. Option to purchase location
JAW
keys, various jaws and swivel base if required.
WIDTH
101mm
Repeatability within 0.025mm.
156mm
206mm
!
ORDER
CODE
SSV-100
SSV-150
SSV-200
01453 839600
Parallel Set – Hardened & Ground
Workshop quality, Accuracy +/- 0.0002”
10 pairs in case 1/8” x 6” long
Sizes: 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1.1/8”, 1.1/4”, 1.3/8”,
1.1/2”, 1.5/8”.
Order Code:
LIN-52-437-010U
Our Price:
£39.30
MAX
OPENING
153mm
226mm
265mm
OUR
PRICE
£339
£369
£499
S
Supplied with mounting screw and driving lugs.
Balanced to G6.3 12000 RPM.
ER Collet Chuck
70mm &100mm Gauge length
Balanced to G6.3 12000 RPM
S
BT40 CODE
16mm
22mm
27mm
32mm
40mm
PAG-340PF116
PAG-340PF122
PAG-340PF127
PAG-340PF132
PAG-340PF140
DIN69871 SK40
CODE
PAG-140PF116
PAG-140PF122
PAG-140PF127
PAG-140PF132
PAG-140PF140
70mm Gauge length
OUR PRICE
£31.00
£31.00
£32.00
£32.50
£41.00
Balanced to G6.3 12000 RPM.
BT40 CODE
6mm
8mm
10mm
12mm
16mm
20mm
25mm
32mm
40mm
PAG-340WLD06
PAG-340WLD08
PAG-340WLD10
PAG-340WLD12
PAG-340WLD16
PAG-340WLD20
PAG-340WLD25
PAG-340WLD32
PAG-340WLD40
DIN69871
SK40 CODE
PAG-140WLD06
PAG-140WLD08
PAG-140WLD10
PAG-140WLD12
PAG-140WLD16
PAG-140WLD20
PAG-140WLD25
PAG-140WLD32
PAG-140WLD40
BT40 CODE
ER16
ER25
ER32
PAG-340PP110
PAG-340PP116
PAG-340PP120
SIZE
BT40 CODE
ER16
ER25
ER32
PAG-340PP210
PAG-340PP216
PAG-340PP220
OUR
PRICE
£24.70
£24.00
£24.00
£24.00
£24.00
£24.00
£27.30
£28.90
£37.30
Keyless Chuck 1-13mm Capacity
One piece chuck giving improved rigidity
and less overhang.
NEW
OHand operated for tightening.
ORDER CODE
TAPER
PAG-340MPI13
PAG-140MPI13
BT40
DIN69871 SK40
BODY
DIA
50
50
GAUGE
LENGTH
98
87
Parallel shank, ideal for a multitude of uses on
manual or CNC machines.
SHANK
DIA’
6
8
10
12
16
20
25
20
32
40
SHANK
LENGTH
45
100
100
120
100
100
150
160
150
100
NUT
DIA’
16
16
22
22
32
32
42
50
50
50
HEAD
LENGTH
37.1
37.1
37.6
37.6
37.6
40.6
40
53
53
53
OUR PRICE
£28.35
£28.35
£29.50
ORDER
CODE
PAG-706PM107
PAG-708PM207
Offer
PAG-710PM210
PAG-712PM310
PAG-716PP210
PAG-720PP220
PAG-725PP316
PAG-720PP420
PAG-732PP320
PAG-740PP220
Offer Price: £12.20
DIN69871
SK40 CODE
PAG-140PP210
PAG-140PP216
PAG-140PP220
OUR PRICE
£35.70
£40.50
£40.50
OUR
PRICE
£94.00
£94.00
Straight Shank ER Collet Chucks
ER
SIZE
ER11
ER11
ER16
ER16
ER16
ER16
ER25
ER32
ER32
ER40
DIN69871 SK40
CODE
PAG-140PP110
PAG-140PP116
PAG-140PP120
100mm Gauge length
Weldon Sidelock Holder
SIZE
SIZE
OUR
PRICE
£27.50
£27.50
Price:
£32.00 £12.20
£32.00
£41.30
£38.20
£45.80
£48.10
£48.10
£48.10
01453 839600
SIZE
sales@crhollands.co.uk
www.crhollands.co.uk
Facemill Holder
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
13
S
01453 839609
14
TBT40,
d
BT50 & Din 69871 SK40 Taper Milling Chuck
Balanced to 12,000 RPM, these power chucks provide heavy duty
clamping forces for high performance milling where rigid and
accurate gripping is necessary. The chucks use a parallel
reduction sleeve for shank sizes under 20mm and 32mm
respectively which can be ordered separately, see below.
B
B
MAS BT40
PAG-340FS120
PAG-340FS132
PAG-340FS332
MAS BT50
PAG-350FS220
PAG-350FS232
BORE
DIA
20
32
32
GAUGE
LENGTH
80
85
135
HEAD
DIA
46
62
62
20
32
100
100
47
63
DIN 69871 SK40
PAG-140FS120
PAG-140FS132
PAG-140FS332
GAUGE
LENGTH
75
95
135
HEAD
DIA
46
62
62
OUR
PRICE
£156.00
£178.00
£209.00
£230.00
£240.00
01453 839600
sales@crhollands.co.uk
www.crhollands.co.uk
Reduction Sleeve SDetails:
Size 20: sleeve with head dia of 25mm, the length under the head is 50mm.
SizeS32: sleeve with head dia of 37mm, the length under the head is 60mm.
SLEEVE
DIA
BORE
DIA
ORDER
CODE
OUR
PRICE
SLEEVE
DIA
BORE
DIA
ORDER
CODE
OUR
PRICE
20
20
20
20
20
6
8
10
12
16
PAG-920BFS06
PAG-920BFS08
PAG-920BFS10
PAG-920BFS12
PAG-920BFS16
S
£18.90
£18.90
£18.90
£18.90
£18.90
32
32
32
32
32
32
32
6
8
10
12
16
20
25
PAG-932BFS06
PAG-932BFS08
PAG-932BFS10
PAG-932BFS12
PAG-932BFS16
PAG-932BFS20
PAG-932BFS25
£21.00
£21.00
£21.00
£21.00
£21.00
£21.00
£21.00
TAP
SIZE
M3
M3.5
M4
M5, M6
M10
M3
M3.5
M4
M5, M6
M8
M10
M10
M12
M14
M16
M4
M5, M6
M8
M10
M10
M12
M14
M16
M18
M20
M5, M6
M8
M10
M10
M12
M14
M16
M18
M20
M24
M27
DIA
SQ
3.5
4
4.5
6
7
3.5
4
4.5
6
8
7
10
9
11
12
4.5
6
8
7
10
9
11
12
14
16
6
8
7
10
9
11
12
14
16
18
20
2.7
3
3.4
4.9
5.5
2.7
3
3.4
4.9
6.2
5.5
8
7
9
9
3.4
4.9
6.2
5.5
8
7
9
9
11
12
4.9
6.2
5.5
8
7
9
9
11
12
14.5
16
S
S
ER Tapping Collets
COLLET
SIZE
ER16
ER16
ER16
ER16
ER16
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER25
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER32
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
ER40
Suitable for Din 371 & 376 taps
the tap
O(check diameter and square sizes) Collet holds onOffer
Price: £8.95
diameter
and
drives
from
its
square.
Effective
for
stainless
O
steel and other difficult
materials where taps
may move in collet.
Offer Price: £12.20
O
OER
Sealed Collets For Through
Coolant tools
Ideal solution for achieving through coolant with existing
ER chucks. The slits in collet are sealed to prevent
coolant loss and force coolant through the tool.
ER
COLLET SIZE
OUR PRICE
ER16
3,4,6,8,10mm
£17.50
ER25
3,4,6,8,10,12,16mm
£18.00
ER32
3,4,6,8,10,12,16,20mm
£18.50
OUR
PRICE
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£36.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
£38.15
Offer Price: £98.20
Order Code: ER11- (Size) 1.0mm – 7mm
Order Code: ER16- (Size) 1.0mm – 10mm
Order Code: ER25- (Size) 1.0mm – 16mm
Order Code: ER32- (Size) 2.0mm – 20mm
O Order Code: ER40- (Size) 3.0mm – 30mm
Offer Price: £8.95
Offer Price: £6.42
Offer Price: £7.13
Offer
NEWPrice: £7.30
Offer Price: £12.20
ER Collet Set in Tray (Class 1, 10 microns)
Order Code: ER11SET2-7 7 pc 1mm to 7mm in 1mm increments,
Order Code: ER16SET2 10 pc 1mm to 10mm in 1mm increments,
Order Code: ER25SET2 15 pc 2mm to 16mm in 1mm increments,
Order Code: ER32SET2 18 pc 3mm to 20mm in 1mm increments,
Order Code: ER40SET2 23 pc 4mm to 26mm in 1mm increments,
Offer Price: £62.95
Offer Price: £64.00
Offer Price: £98.20
Offer Price: £127.00
Offer Price: £189.83
40 and 50 Taper Tightening Fixture
With vertical and horizontal holding. Bench
mounted and suitable for BT, Din 69871, Din
2080 and SK taper spindle tooling, please specify
at time of order.
TAPER
40
50
ORDER CODE
TIGHT-40
TIGHT-50
PRICE EACH
£69.00
£99.00
sales@crhollands.co.uk
www.crhollands.co.uk
ER Collet (Class 1, 10 microns)
Bath Road, Woodchester,
Stroud, Gloucestershire GL5 5EX
15
40 Taper Tightening Pot
w
Tool Trolley
4 tool racks with 28 x ISO 40 taper positions.
2 lockable drawers and a side tray.
W650mm x H840mm x L1000mm.
52kg flat packed trolley, very sturdy and durable.
Our Price:
W
5
£319.00
Order Code: VTT-5-40
Order Code: TF-40
Our Price: £57.50
01453 839600
Economy bench vice mounted design for effective
assembly of tooling with 40 taper. Simply hold in
vice, drop taper into pot and locate on
lugs then tighten as required.
01453 839609
Draper 2kW 230V Fan Heater
Two heat settings 1kW and 2kW outputs & adjustable
thermostat. Vertical or horizontal standing with carry
handle.
Our Price:
£18.99
sales@crhollands.co.uk
www.crhollands.co.uk
Order Code: 07213
Black & Decker EPC18CAK
18v Cordless Drill Driver
Air Operated Pencil Die
Grinder Kit
Fitted with Variable speed control, reverse switch
and 10mm keyless chuck. This sturdy drill has a
24 position torque clutch for screw driving.
Supplied with 1 x 18v battery, charger and case.
For hand use with mounted points or rotary
burrs. Maximum speed 70,000 RPM, 1/8” collet,
1/4” BSP fitting.
Supplied in storage box with spanner and
selection of mounted points.
BT, Din 69871, Din 2080 and HSK s
a
Our Price:
£152.50
W
5
Our Price:
Order Code: UT1070K
V
01453 839600
£54.99
Order Code:
B/D EPC18CAK
Dormer Supercut Range
The only lubricant Dormer Tools recommends
for its range of cutting tools. For excellent
performance, increased tool life, better surface
finish and closer tolerances. Low odour, milder
on the skin, solvent free formula.
Available as a fluid, aerosol or compound.
SUPERCUT
Liquid
Stainless Liquid
Aluminium Liquid
Compound
Aerosol
SIZE
340g Bottle
340g Bottle
340g Bottle
450g Tin
300ml
ORDER CODE
DORMSCUT-00
DORMSCUT-05
DORMSCUT-06
DORMSCUT-03
DORMSCUT-02
PRICE EACH
£12.99
£12.99
£11.25
£12.99
£11.25

Similar documents

CÓDIGO NA LOJA DESCRIÇÃO

CÓDIGO NA LOJA DESCRIÇÃO CIRCUITO INTEGRADO AN- 6662 = M-54649 L / BA-6248

More information

Die BUCHSTAVIER - Das Dosierte Leben

Die BUCHSTAVIER - Das Dosierte Leben zusammen-, vor-, her- und hinstellten, musste dies ja so kommen. - Dies ist Werner Rabus gewidmet, der uns frei Haus diese Buchstabenkombinationen errechnete und lieferte. - Dies ist Jochen Kunzman...

More information

Coatings - SEF meccanotecnica

Coatings - SEF meccanotecnica for specific applications such as stainless steels and high temperature alloys, hardened steel and aluminium and softer alloys. We also carry a complete family of standard carbide end mills designe...

More information

TuffCut - MA Ford

TuffCut - MA Ford 1919 when Matthew A. Ford produced the first hand cut HSS rotary files made in America. Whether it’s engineering the exacting tolerances of the first circuit board drills, or developing the intrica...

More information

Tiger·tec® Silver Turning

Tiger·tec® Silver Turning GEOMETRY OVERVIEW OF WALTER P GENERATION In the Tiger·tec® Silver – ISO P generation, four geometries have been developed  in parallel and matched to each other. The range of supported applications...

More information