Venetian Blinds - Integration in Motion

NEW!
Venetian Blinds
with Intelligent Tilt Alignment
™
Introducing Venetian Blinds with Intelligent Tilt Alignment
™
Lutron Venetian blinds provide independent control of blind height and slat angle,
putting a new tilt on the timeless look of this traditional window covering.
Superior functionality is revolutionizing the category of automated horizontal blinds.
Now you can have optimal privacy, while still preserving your view and controlling
the amount of sunlight in a space. With one button press you can change the amount
or angle of light streaming into a room—for unmatched versatility any time of day.
•
Set your favorite blind height and tilt angle for the slats (called a preset)—shades will automatically
adjust to that height and tilt angle with the touch of a button.
•
You can also set more than one preset, giving you a range of options for automatically adjusting blinds.
•
Intelligent Tilt Alignment ensures that the slat angle between adjacent blinds remains
within 1/16th of an inch of each other for a clean look.
•
Venetian blind controls (keypads and remotes) feature buttons for adjusting slat tilt angle.
With one touch, you can precisely position the slats.
Control Options
Venetian blinds are available for Sivoia® QS
and Sivoia QS Wireless systems.
GRAFIK Eye® QS
QS wireless keypads are only available
in Designer style (shown actual size).
QS wired keypads are only available in
architectural insert and non-insert style.
Pico® wireless control
(shown actual size)
IR remotes
(shown actual size)
Lutron | 01
Style Options
Sophisticated style options give every space a signature look.
Venetian blinds are available in a variety of slat colors and finishes:
• Genuine hardwoods – Elite Collection
• Painted and stained hardwoods – Premium Collection
• Brushed and painted aluminums – Aluminum Collection
Custom color matching is available exclusively for the Elite Collection.
Customers own material (COM) may be used; contact
shadingquotes@lutron.com for details.
Slat Options
Decorative Tapes (optional)
Decorative tapes conceal lift
cords and increase light-blocking
performance when slats are
closed, all while adding a colorful
accent to a Venetian blind.
02 | Lutron
Valance Styles
Add an elegant, finished look to a Venetian blind by specifying one of our four
standard valance styles. This optional top treatment fits easily over the blind’s
brackets and headrail for a complete and seamless installation.
Camelot
Cavalier
Majesty
Queen
Anne
Lutron | 03
Available Tools
World-class support makes specification simple.
CO
M
Int Vene IN
ell
ige tian G S
nt blin OO
Til
t A ds w N !
lig
nm ith
en
tT
M
| residential shading solutions
The Avant Collection
TM
Avant Collection™ brochure
P/N 367-1678
Venetian binder
P/N VENETIAN-BINDER
Lutron
®
Venetia
n blind
Mount
Brackets
Lutron®
Venetian Blind
ing opt
Venetian
options
Blind
ions
can be
Chassis
inside mou
nted, or
outside
Specificat
ion
085-26
mounted
2 2 12.29.1
0
on the
Chassis Specification
trim or
above
the trim.
Lutron Venetian
Blind Chassis
®
085-262 1 12.29.10
Lutron | Venetian blinds
•
•
•
2 ¼ in
(57 mm)
•
Outside
Bracke
t dimens
ions
Headra
1 5/8 in
(41 mm)
2 ¼ in
(57 mm)
A wide variety slat finishes available in hardwood
and aluminum
Decorative tapes available to conceal operational cords while
adding a colorful accent to the blinds
Four optional valance styles are available to conceal the
headrail
Aluminum headrail provides clean minimalist look
for applications without a valance
•
•
•
•
•
•
•
•
•
•
Independent lift control adjusts height of blinds and
provides access to the window without affecting tilt
Tilt can be adjusted independent of lift to vary the privacy
level at any blind position
Intelligent Tilt AlignmentTM ensures tilt position
between adjacent shades will remain within 1/16 th
of an inch
Blinds go to a pre-determined height and tilt angle when
a preset is recalled
Multiple presets can be defined for the same blind
or group of blinds
Compatible with Sivoia QS and Sivoia QS Wireless systems
Venetian blind components designed for ultra-quiet
operation (will not exceed 44 dBa measured 3 ft
(1m) from drive unit)
Simple installation for both inside mount and outside
mount applications
Provides maximum window coverage – symmetrical
light gaps on both sides for a clearance of 1/4 in
(8 mm) per side between blind and window jam
Hardwood slat blinds available in sizes up to 80 ft² (7.4 m²)
max 96 in (2438 mm) wide x 120 in (3048 mm) high
Aluminum slat blinds available in sizes up to 120 ft² (11.1 m²)
max 144 in (3658 mm) wide x 120 in (3048 mm) high
mount
on trim
il dimens
ions
•
Outside
mount
above
trim
•
•
2
2
Installing the brackets
2.1
Outside mount (trim mount shown)
2.2
Inside mount
2.1.1
Center the brackets over the window and space them apart a
distance equal to the headrail width + ½ in (13mm). Assure they
are level and plumb.
2.2.1
Mount the brackets inside the jamb as shown.
Wire location:
Outside Mount on trim: 2 in (50 mm) from end of system ½ in (13 mm)
above top of bracket
Outside Mount above trim: 2 in (50 mm) from end of system ½ in
(13 mm) below top of bracket
Inside Mount: 2 in (50 mm) from end of system
Tip: Inserting screw(s) into the trim underneath the bracket provides
necessary support when mounting brackets on contoured trim.
Bracket
Trim
Mounting screw
The Venetian Chassis Installation Guide is a complement to the
enclosed Basic Wiring and Setup Guide. The Chassis Installation
Guide describes the mechanical installation. The Basic Wiring and
Setup Guide describes the wiring and setup for basic function of
the Venetian Blind.
Tools required:
Tape Measure
Level
Slat
optblind
Lutron Venetian
ions
Slat mate
colors. rials available
Aluminum
in hard
slats availa woods and
Hardwood
ble in paint aluminum
. Hard
ed and
Elite Colle
brushed woods availa
ble in a
finishes.
Premium ction – Available
variety
of stain
Customer Collection – Avail in 5 clear coate
s and paint
’s Own
d
able in
ed
Material
23 stain natural finish
es. Cust
ed
(COM)
Aluminum
also availa finishes and
om color
31 paint
matching
Available Collection
ble. Cont
ed finish
in brush
act Cust
finishes
ed finish
available.
omer Serv es.
and 13
ice for
painted
details.
finishes.
Job Nam
e:
Job Num
ber:
Spec
i f i c at
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
1/4 in Hex-Head Driver
Power Drill
#2 Phillips Screwdriver
Drill Bits
Tip: If necessary, block out brackets to clear cranks or other hardware.
Jack screw
for support
Outside mount on trim
Outside mount above trim
Inside mount top wire exit
Inside mount side wire exit
Headrail Width + ½ in
Box contents:
(1) Left
mounting bracket
(1) Right
mounting bracket
(2) Valance
mounting clips
(8) Mounting
screws
(1) Valance
ion S
ubmi
t ta l
Model
Numbers:
3
Position the valance mounting clips on the headrail (if provided)
Wall mount on trim
(1) Venetian blind
3.1
Attach the valance mounting clips to the headrail so they are aligned
with the mounting position on the valance.
Note: If mounting directly to wall, block out brackets to clear trim.
(2) Headrail
securing screws
Blocking
Bottom rail shims
page 2
page 1
Job Number:
Specification submittal
online PDF
Headrail
!
CAUTION: Risk of falling objects. Securely install the Venetian Blind
system per the mounting instructions. Failure to do so could
result in minor or moderate injury.
Notes:
Lutron systems are intended for use with only Lutron hardware, controls,
and power supplies.
•
Codes: Install in accordance with all local and national electrical codes.
•
Environment: Ambient operating temperature: 32 °F - 104 °F
(0 °C - 40 °C), 0 - 90% humidity, non-condensing. Indoor use only.
•
Maintain sufficient clearance between the moving blind and any object.
Trim
Wall
Wall mount above trim with blocking
Installation instructions
online PDF
All marketing materials can be ordered using the shade configuration tool (SCT).
PDFs are also available online at www.lutron.com under Service and Support.
04 | Lutron
Installing the brackets (continued)
Notes:
Cable should exit from the wall or jamb on the drive side of the system
Leave 12 to 18 in (300 to 450 mm) of cable exposed
3 3/8 in
(86 mm)
3 5/8 in
(92 mm)
•
Job Name:
Choose one of the options below to drill for cable access
1.1
•
nt
Design
•
1
Inside mou
Aesthetics
•
English
Installation Guide (please read before installing)
Venetian Blinds are operated by ultra-quiet, precision control
drives. The Venetian blind drive is housed in the headrail and
provides independent control of the lift and tilt. Lift and tilt
positions can be stored as a preset and can be recalled with
the touch of a button.
Frequently Asked Questions
What systems are compatible with Venetian blinds?
Venetian blinds are available for Sivoia® QS and Sivoia QS Wireless. For integration into
RadioRA® 2, HomeWorks® QS, and Quantum® please contact shadingquotes@lutron.com.
To integrate Venetian blinds into a HomeWorks Illumination system, please see Application
Note, available online, and contact Technical Support for details.
What is the standard lead time?
The standard lead time is 30 business days.
Do Venetians have a fire retardant (FR) rating?
Wooden blinds are not FR rated. However, it is possible to treat the material or use
a non-wood material such as aluminum or a wood substitute to achieve FR rating status.
Wood substitute Venetian blinds are not standard in the Lutron line, but can be sourced
as a custom. For more information, please contact shadingquotes@lutron.com.
What is “stack”?
Stack results when the slats of the Venetian blinds amass on top of each other
when the blind is fully open, blocking the top portion of the window. To preserve
the full outdoor view, simply mount the blind above the window frame, making
sure to account for additional system height.
This parameter is reported in the shade configuration tool (SCT) and only includes
the height of the slats and bottom rail—valance and headrail are not included in this
calculation. To calculate total height from the ceiling to the base of the bottom rail,
add 3.75 inches to the reported stack height.
System specifications
Wooden slats
Width range: 24 – 96 in. (610 – 2438 mm)
Height range: 12 – 120 in. (305 – 3048 mm)
Maximum system size: 80 sq. ft. (7 sq. m)
Slat thickness: 0.125 in. (3.17 mm)
Aluminum slats
Width range: 24 – 144 in. (610 – 3658 mm)
Height range: 12 – 120 in. (305 – 3048 mm)
Maximum system size: 120 sq. ft. (11 sq. m)
Slat thickness: 0.008 in. (0.2 mm)
For specification assistance, contact shadingquotes@lutron.com.
Lutron | 05