CURRICULUM VITAE - Back to Main Page

Transcription

T.C. KADİR HAS UNIVERSITY
Faculty of Engineering and Natural Sciences
Department of Industrial Engineering
2015
Zeki AYAĞ, Ph.D., P.Eng.
Full Professor
Director, Graduate School of Science and Engineering
Kadir Has Campus, 34083 Cibali, Istanbul, TURKEY
Phone: (90) 212 533 6532/Ext. 1708, Fax: (90) 212 533 5753, E-mail: zekia@khas.edu.tr
Personal URL: http://www.zekiayag.org
Curriculum Vitae
[Detailed]
Zeki Ayağ, Ph.D., P.Eng.
Updated: 2016-02-03
Table of Contents
1.
2.
3.
4.
5.
6.
7.
8.
Contact Information
Educational Philosophy
Bibliography
Personal Information
Education
Research Interests
Skills
Professional Experience
8.1. Academic
8.2. Industrial
8.3. Internships
9. Publications
9.1. Refereed Journal Articles
9.2. Refereed Proceedings
9.3. Poster Representations
9.4. Invited Talks
9.5. Presentations
9.6. Theses (unpublished)
9.7. Books and Lecture Notes
9.8. Others
9.9. Citations by Total
9.10. Citations by Others
10. Grants and Funded Project Work
11. Editorial and Refereeing Responsibilities
11.1. Editorial
11.2. Refereeing
11.3. Evaluating Tasks
12. Memberships and Professional Affiliations
13. Student Supervision
13.1. Student Counseling
13.2. Undergraduate Thesis Supervised
13.3. Undergraduate Thesis Read as Committee Member
13.4. Graduate Thesis Supervised
13.5. Graduate Thesis Read as Committee Member
13.6. Graduate Thesis Monitored
14. Other Professional Activities
14.1. Organizations Activities
14.2. Sessions Chaired at Organizations
14.3. Scientific Committee Member
14.4. Others
15. Sports and Cultural Activities
16. Awards
17. References
For lately updated CV - Please visit to http://www.zekiayag.org
2
3
4
5
6
7
9
11
12
12
18
21
22
22
24
32
32
33
33
33
34
35
38
159
160
160
160
162
163
165
165
165
166
166
167
167
168
168
168
169
171
172
173
175
1. Contact Information
[Business]
KADİR HAS UNIVERSITY
Kadir Has Campus, Kadir Has Caddesi, 34083 Cibali, Istanbul, TURKEY
Phone: (90) 212 533 6532 / Ext.1708
Fax: (90) 212 533 5753
E-mail: zekia@khas.edu.tr
Personal URL: http://www.zekiayag.org
Graduate School of Science and Engineering
Main Campus (Block B), 4th Floor, No. 43
Kadir Has Campus, 34083 Cibali, Fatih
Istanbul, TURKEY
Tel: (90) 212 533 6532/Ext.1708
Secretaryship: 1349, Fax: (90) 212 533 6361
E-mail: fbe@khas.edu.tr
3
2. Educational Philosophy
Teaching is the art of making students think. My instruction is highly interactive. This exchange
of ideas helps both the instructor and students gain from the exchange. Some of the best ideas
come from a fresh perspective. My teaching philosophy emphasizes connecting the subject
matter to what is happening in the real world. The text is supplemented with appropriate
journals, newspaper articles, and cases. Current topics in line with the subject matter are
discussed. My experience in industry allows me to keep the course work relevant and
interesting. The students should have a sense that they can use this course work to help advance
their careers.
A good professor must know what he or she wants the students to come away with at the end
of the course. The specifics of this goal will shape the choices of assignments and supplemental
materials. The input of the dean and consultation with the instructors of any immediate pre- or
post-requisite courses need to be considered here. Assignments should be challenging and make
an impression.
Good presentation is the key to successful instructional learning. The subject matter should be
second nature to the professor. He or she should be able to answer basic questions without
referring to the text or supplemental materials. The day’s topic should be discussed in a
conversational tone. Notes should be only a reference and rarely read from directly.
A good professor makes the expectations he or she has of the students known at the beginning
of the course. Grading should be fair and properly distributed among assignments and exams.
One poor mark should not cause a student to give up. There should be an opportunity to
improve. A good professor should make it clear he or she is available to students for one on one
consultation when necessary. Poorly performing students should be especially encouraged to
take advantage of this opportunity.
Finally, one must have a love for teaching to succeed. This means constant examination and
improvement of the process. My teaching skills are constantly re-examined to be improved
upon. It is an iterative cycle of process improvement.
4
3. Bibliography
Zeki AYAĞ is currently working as a Full Professor at Industrial Engineering Department of
KADIR HAS UNIVERSITY. He was also Department Chair of Industrial Engineering
Department between 2006 and 2015, and Director of Graduate School of Science and
Engineering after have been serving as Assistant/Associate Professor between 2005 and 2016
at the same university. He holds an undergraduate degree in Industrial Engineering Department
of Faculty of Business Administration, a Master’s in Engineering Management Program of
Industrial Engineering, and a Ph.D. degree in Industrial Engineering Program of Industrial
Engineering at ISTANBUL TECHNICAL UNIVERSITY (I.T.U). Before joining to KADIR
HAS UNIVERSITY, he worked as an Assistant Professor in ISTANBUL KULTUR
UNIVERSITY for almost 2 years. In addition to his academic experience, he has national and
international industrial experience such as; CAD Engineer in MAGNA INTERNATIONAL,
INC., Cam-Slide Mfg. (CANADA), Engineering Designer in MOLD-MASTERS LTD.
(CANADA), Construction Department Chief in MAKINA TAKIM ENDUSTRISI A.S., and
Quality Assurance Engineer in PIMAS A.S. He also worked as a full-time Research and
Teaching Assistant in the IE Department at I.T.U. for 4 years. He taught many courses, such as
Operations Research I and II, Systems Simulation, Multiple-Criteria Decision Making, Facility
Design and Plant Layout, Integrated Enterprise Systems, Computer Integrated Manufacturing
(CIM) and so on. His research interests include Multiple-Criteria Decision Making (MCDM),
Analytic Hierarchy/Network Process (AHP/ANP), Fuzzy Logic, Simulation of Manufacturing
Systems, New Product Development (NPD). He has published many articles in leading
periodical journals indexed by SCI®) and SCI-Expanded®, such as International Journal of
Production Research, Journal of Intelligent Manufacturing, IIE Transactions, Journal of
Engineering Design and Journal of Intelligent and Fuzzy Systems and so on. He is also an active
referee for the leading journals such as International Journal of Production Research and
Computer and Industrial Engineering, International Journal of Approximate Reasoning,
Information Sciences, Journal of Engineering Design and so on, and for conferences such as
International Conference on Information Systems (ICIS 2005). He has also given many
seminars on his interest fields with numerous publications in conference and congress
proceedings. He is a licensed Professional Engineer (P. Eng.) from both Society of Professional
Engineers in Ontario (PEO) in CANADA, and Chamber of Mechanical Engineers of Turkey
(TMMOB). He is Senior Member of Institute of Industrial Engineers (IIE). He has also various
memberships such as Operational Research Society, TURKEY (YAD), Turkish Industrial
Engineers Group (TURK IE), Society of Fuzzy Systems, TURKEY (BUSIDE), International
Society on Multiple Criteria Decision Making (MCDM), International Association of Engineers
(IAENG), IAENG Society of Industrial Engineering, IAENG Society of Operations Research,
IAENG Society of Artificial Intelligence, IAENG Society of Information System Engineering
and so on. He is also listed in various editions of Who is Who in Engineering in the World, and
Leading Engineers of the World. He is also Associate Editor in Advances in Fuzzy Systems,
Editorial Board Member of International Journal of Production Research, Associate Editor of
Journal of Intelligent Manufacturing, and in different capacities for other journals.
5
4. Personal Information
Citizenship:
Military Obligations :
Language Facility:
Turkish/Canadian [Dual]
Completed
Turkish [mother tongue], English [fluent], German [basic]
6
5. Education
P.Eng. REGISTERED PROFESSIONAL ENGINEER
[2001] Association of Professional Engineers of the Province of Ontario (PEO),
CANADA
Ph.D.* ISTANBUL TECHNICAL UNIVERSITY
[2003] Institute of Science and Technology
Department of Industrial Engineering [ABET Substantially Equivalent Program]
Industrial Engineering Program
Thesis A step-by-step implementation and analysis model for computer integrated
manufacturing (CIM) systems
Article The article produced from this study was published in International Journal of
Research, a journal indexed by ISI Science Citation Index (SCI®):
[from thesis] Production
Ayag, Z. (2002) “An analytic-hierarchy-process based simulation model for
implementation and analysis of computer-aided systems “, International Journal
of Production Research, Vol.40, No.13, 3053-3073.
Advisor Prof.Dr. Murat DİNÇMEN
Committee members: Prof.Dr. Bülent DURMUŞOĞLU, Prof.Dr. Ali R.
KAYLAN, Prof.Dr. Gündüz ULUSOY, Prof.Dr. Ataç SOYSAL
Degree 93.5 out of 100 (Excellent)
M.Sc.* ISTANBUL TECHNICAL UNIVERSITY
[1991] Institute of Science and Technology
Thesis The simulation of a mold manufacturing facility using SIMAN
Committee members: Prof.Dr. Ramazan EVREN, Prof.Dr. Mehmet TANYAŞ
Degree 91.6 out of 100 (Excellent)
B.Sc.* ISTANBUL TECHNICAL UNIVERSITY
[1989] Faculty of Business Administration
Thesis A survey on simulation applications in production systems
Degree 68.2 out of 100 (Well)
*The degrees accredited by the Canadian Engineering Accreditation Board (CEAB)
of the Canadian Council of Professional Engineers (CCPE) in 2001
7
[Theses]
Ph.D.
Title: A step-by-step implementation model of a computer integrated manufacturing (CIM)
system and its analysis using simulation technique
Abstract: In this study, a systematic framework for a step-by-step implementation and analysis
of a computer integrated manufacturing (CIM) system consisting of various computer-aided
systems (CAx) systems (or modules) is described, where analytic hierarchy process (AHP),
simulation and benchmarking techniques are effectively used together. As the AHP technique
developed by Thomas L. Saaty in 1980, one of the most popular multiple-criteria decision
making (MCDM) methods is utilized for the evaluation and ranking of hardware and software
components for a CAx system (e.g. CAD) to be implemented in a company, a simulation
generator integrated with this technique (called AHP-based simulation approach) is used for
further analysis in order to try the high-ranked alternatives of the AHP, and measure their
benefits on company’s modelled production organization. This integrated approach provides us
to obtain more reliable solution through AHP and simulation. The approach is also applied for
a leading company in Turkey.
M.Sc.
Title:A simulation study of a mold-making facility using SIMAN
Abstract: The subject of this thesis is related to a simulation study done in the mold-making
facility of SIEMENS A.G. Kartal Factory, a leading company in Turkey as well as in the world.
In this study, first the current system (or mold-making facility) is analyzed and then related data
for simulation study is gathered. Since acquiring reliable data from real system was an
important problem therefore the real life system was examined for a short period in order to
generate the required data. As a simulation language, SIMAN was chosen due to its outstanding
capability and advantages of modeling, and then real system was modeled under a set of
assumptions. Next the model is run and the results were obtained. The results of both the model
and real system was also compared in terms of some performance criteria to make sure that the
model works correct and produces reliable results. Later, some scenarios were tried on the
model to get some results for the decision-maker to make a decision for this mold-making
facility (i.e. optimal number of machines in each machine group, their efficiency and so on).
B.Sc.
Title: A survey on simulation applications in production systems
Abstract: The subject of this undergraduate study is to review simulation applications on
production systems in literature. After reviewing outstanding studies that were realized between
1985 and 1989, some of them were chosen to analyze more in detail. And then, they were
categorized into their subjects and written in the format of the thesis. Shortly, this thesis presents
different simulation studies applied for various production systems, such as flexible
manufacturing systems (FMS), flexible assembly systems (FAS), job shop manufacturing, mass
production systems and transfer lines and so on.
8
6. Research Interests
My main research interests lie in the areas of fuzzy logic based multiple-criteria decision
making methods; analytic hierarchy process, analytic network process, simulation of discrete
manufacturing systems, new product development, concept evaluation, and computer
integrated manufacturing. I strongly believe that the interplay of these elements provides a very
fruitful and challenging research domain, both from a theoretical and practical viewpoint.
As part of my Ph.D. dissertation, I worked on the development of “a step-by-step
implementation model of a computer integrated manufacturing (CIM) system and its analysis
using simulation technique”. Because; manufacturing organizations in the developing countries
are under intense competitive pressures. Major changes are being experienced with respect to
resources, markets, manufacturing processes, and product strategies. As result of international
competition, only the most productive and cost-effective industries will survive. That’s why; in
this study, a systematic structure for a step-by-step implementation and analysis of a computer
integrated manufacturing (CIM) system consisting of various computer-aided systems (CAx)
systems is described, where analytic hierarchy process (AHP), simulation and benchmarking
techniques are used effectively together. As AHP technique is used for the evaluation and
selection of the hardware and software components for a CAx system to be implemented in a
company, a simulation generator integrated with this technique is used for further analysis to
measure its benefits on company’s modelled production organization. In final part of the study,
the proposed model was applied to a company, Makina Takım Endüstrisi A.Ş., a leading
company on design and manufacturing all kinds of cutting tools in Turkey, as a case study in
order to prove its applicability on a real-life system.
As a product of my Ph.D. study, the following article was published: Ayag, Z., 2002, “An
analytic-hierarchy-process based simulation model for implementation and analysis of
computer-aided systems, International Journal of Production Research, Vol. 40, No. 13, pp.
3053-3073.
As of today, I also published many articles and conference papers in outstanding journals and
proceedings since my Ph.D. completed in 2003.
I am currently interested in mostly new product development environment; for instance, I have
been working on how to evaluate concept design alternatives through multiple-criteria decision
making methods integrated with/out fuzzy logic.
9
Multiple-Criteria Decision Making (MCDM)
Fuzzy Logic-Based Multiple-Criteria Decision Making
(F-MCDM)
Concept Evaluation in a New Product Development
(NPD) Environment
Simulation of Discrete-Manufacturing Systems
Computer Integrated Manufacturing (CIM) Systems
10
7. Skills
[Computer]








SAP R/3 Enterprise 4.7 x 2.00, IAS CANIAS, and familiar with others.
AutoCAD, I-DEAS Master Series, CATIA, and familiar with others.
MS-Cobol, QBasic, Fortran
Microsoft Word, Excel, PowerPoint, FrontPage, Project and Visio
ARENA Simulation Software
LINGO, MINITAB
Lotus Notes 5.0, Outlook and Outlook Express, Web Design with MS-Word and
FrontPage
Good knowledge of Windows and PC-based systems
[Machine and Measurement Tools]


Practically knowledge of various measurement tools,
Practically knowledge of conventional and CNC machine tools and programming.
11
8. Professional Experience
8.1. Academic
Kadir Has University [2005-Present]
Industrial Engineering Department
Feb’16-P
Apr’14-P
Apr’14-P
Nov’15-P
May’09-P
May’09-Feb’15
May’09-Mar’15
Dec’08-P
Nov’08-Feb’16
Jul’06-Dec’08
May’06-Feb’15
May’06-Feb’15
Jan’06-May’06
Sep’05-P
Sep’05-Nov’08
Full Professor
Director, Graduate School of Science and Engineering
Senator, University Senate
Member, University Quality Commission
Executive Board Member, Graduate School of Science and
Engineering
Head, Graduate Program in Industrial Engineering
Faculty Executive Board
Board Member, Graduate School of Science and Engineering
Associate Professor
Vice Director, Graduate School of Science and Engineering
Chairman
Faculty Board Member
Vice Chairman
Faculty Academic Board
Assistant Professor
Honored as an Associate Professor on November 28th of 2008, by the High Education Council
of Turkey (YÖK)
Committee Members: Prof.Dr. Gündüz Ulusoy, Prof.Dr. Füsun Ülengin, Prof.Dr. Nesim
Erkip, Prof.Dr. Erdal Erel, Prof.Dr. Refik Güllü.
a. Teaching
Courses
Strategic Management in the 21st
Century (Int’l Summer School at
Konkuk University, South Korea)
Type
Level
Undergraduate
Terms
Jul-Aug’11
IE 598 Graduate Seminar
(Coordinator)
Core
Graduate
Fall’10
Spring’11
Fall’12
Spring’13
Fall’13
Spring’14
Fall’14
Spring’15
12
IE 599 Master’s Thesis
Core
(Coordinator till 2015, and Advisor)
Graduate
IE 211 Introduction to System
Analysis
Core
Undergraduate
(Sophomore)
IE 241 Manufacturing Processes
Core
IE 311 Operations Research I
Core
Undergraduate
(Sophomore)
Undergraduate
(Junior)
IE 312 Operations Research II
Core
IE 317 Multiple-Criteria Decision
Making
Technical
Elective
IE 321 Factory Design and Plant
Layout
Core
Undergraduate
(Junior)
IE 331 Management Information
Systems
IE 332 Systems Simulation
Core
Undergraduate
(Junior)
Undergraduate
(Junior)
IE 344 Introduction to
Manufacturing Processes
IE 348 Computer Integrated
Manufacturing
Technical
Elective
Technical
Elective
Core
13
Undergraduate
(Junior)
Undergraduate
(Junior)
Undergraduate
(Junior)
Undergraduate
(Junior)
Fall’10
Spring’11
Fall’11
Spring’12
Fall’12
Spring’13
Fall’13
Spring’14
Fall’14
Spring’15
Spring’16
Fall’05
Fall’11
Fall’12
Fall’10
Fall’05
Fall’06
Fall’07
Summer’13
Summer’14
Spring’06
Fall’07
Fall’08
Fall’09
Fall’05
Fall’06
Fall’07
Fall’08
Fall’09
Fall’10
Fall’11
Fall’12
Fall’13
Fall’14
Fall’15
Fall’05
Spring’06
Spring’08
Spring’09
Summer’09
Spring’10
Fall’11
Spring’12
Spring’07
Spring’06
Spring’07
IE 401 Production Planning and
Control
IE 422 Strategic Planning
Core
Undergraduate
(Senior)
Undergraduate
(Senior)
IE 423 Integrated Enterprise
Systems
GE 400 Final Project (Coordinator
till 2015, and Advisor)
Technical
Elective
Core
Undergraduate
(Senior)
Undergraduate
(Senior)
GE 401 Engineering Problem
Solving and Project Management
IE 102 Principles of Industrial
Engineering
Core
Undergraduate
(Senior)
Undergraduate
(Freshman)
Core
Core
Spring’08
Spring’09
Spring’10
Spring’11
Spring’12
Summer’08
Spring’11
Spring’12
Summer’12
Spring’13
Spring’16
Spring’08
Spring’07
Spring’08
Spring’09
Spring’10
Spring’11
Spring’12
Spring’13
Fall’13
Spring’14
Spring’15
Spring’16
Fall’12
Fall’13
Spring’14
b. Teaching Staff Mobility (TSP)
Level
Course/Seminar
Universidad de La Coruña, Escuela
Universitaria Politécnica, Spain.
International Summer School at
Konkuk University, South Korea
Copenhagen University, College of
Engineering, Department of
Production Engineering, Denmark
Vilnius Gediminas Technical
University, Faculty of Business
Management, Lithuania
Mondragon University, Faculty of
Engineering, Spain
(U: Undergrad;
G: Graduate;
F: Faculty)
Program
Type
Erasmus
Seminar U
April’10
Exchange
Summer
U
Course
JulyAugust’11
Erasmus
Seminar U
May’12
Erasmus
Seminar U
April’13
Erasmus
Seminar U+G+F
May’14
14
Dates
c. Administrative Duties [Sep’05-Present]
Duties
Bologna Coordinator for the Graduate School of Science and Engineering
(BEK)
University Quality Commission Member
Academic Evaluation and Quality Development Committee (ADEK)
Department Bologna Accreditation Coordinator
Department MÜDEK (ABET) Accreditation Coordinator
Member of Faculty Promotional Activities Committee
Minor Program Department Coordinator
Member of Student Information Management System (BYS)
Improvement Committee
Faculty “Final Project” Coordinator
Graduate Program Coordinator for the M.Sc. Program “Industrial
Engineering”
Academic Counselor for Graduate Students
Member of Faculty Course and Program Changes Committee
Department “Final Project” Coordinator
Industrial Engineering Lab.Coordinator
ERASMUS Selection Committee Member
Member of Course and Program Changes Committee for the Graduate
School of Science and Engineering
Academic Counselor for Undergraduate Students
Double Major Program Department Coordinator
Transfer Students Department Coordinator
Dates
(2015-Present)
(2016-Present)
(2015-2016)
(2013-2015)
(2012-2015)
(2012-2015)
(2010-2015)
(2010-2012)
(2010-2011)
(2009-2015)
(2009-2015)
(2006-2015)
(2006-2015)
(2006-2011)
(2006-2008)
(2006-2008)
(2005-Present)
(2005-2015)
(2005-2015)
d. Miscellaneous
[Presentations]








Panelist, “Introduction to Urban Engineering”, Tuesday Seminars, Graduate School of
Social Sciences, in collaboration with Faculty of Engineering and Natural Sciences,
November 2013, Kadir Has University.
“Engineering and Innovation”, the second part of faculty seminar series for
prospective students, March 2013, Kadir Has University.
“Engineering Your Future”, a presentation for adoption and orientation of English
Preparatory School students, February 2011, Kadir Has University.
MÜDEK and Towards Certification-I: MÜDEK and Accreditation Process, May
2010, Kadir Has University.
MÜDEK and Towards Certification-II: MÜDEK Evaluation Criteria I, May 2010,
Kadir Has University.
MÜDEK and Towards Certification-III: MÜDEK Evaluation Criteria II, June 2010,
Kadir Has University.
MÜDEK and Towards Certification-IV: Self Assessment Report and MÜDEK
Evaluation, June 2010, Kadir Has University.
“Definition and History of Engineering”, a presentation for adoption and orientation of
English Preparatory School students, April 2010, Kadir Has University.
15




“Introduction of the IE Department at Kadir Has University”, a presentation for the
Advisory Board Meeting, October 2009, Kadir Has University.
“Introduction to Engineering”, a presentation for adoption and orientation of English
Preparatory School students, March 2009, Kadir Has University.
“Definition and History of Engineering”, a presentation for adoption and orientation of
English Preparatory School students, April 2008, Kadir Has University.
“History of Engineering”, a presentation for adoption and orientation of English
Preparatory School students, March 2007, Kadir Has University.
[Training]





SAP Educational Software training, 2014, in-campus training, Kadir Has University.
Blackboard training (new version), 2012, in-campus training, Kadir Has University.
Seminar on non-ethical behaviors in writing scientific publications, by Prof.Dr. Emin
Kansu, 2007, Kadir Has University.
Seminar on strategic planning in public sector–high education institutions, by Dr.
Kadri Mirze, 2006, in-campus training, Kadir Has University.
Blackboard training, 2006, in-campus training, Kadir Has University.
[Workshops]






Workshop on “Kadir Has University’s Strategy 2014-2018, for a Focus on Research”,
by Prof.Dr. Volkan Ediger, May 2014, Kadir Has University.
Workshop on “Kadir Has University’s Strategy for a Focus on Research (III)”, by
Prof.Dr. Volkan Ediger, January 2013, Selimpasa Campus, Kadir Has University.
Workshop on “Kadir Has University’s Strategy for a Focus on Research (II)”, by
Prof.Dr. Volkan Ediger, January 2012, Sile, Kadir Has University.
Workshop on “Kadir Has University’s Strategy for a Focus on Research (I)”, by
Prof.Dr. Volkan Ediger, December 2011, Selimpasa Campus, Kadir Has University.
Workshop on how to get certified by MÜDEK (Association for Evaluation and
Accreditation of Engineering Programs), May 2010, Ankara.
Workshop on determining vision, mission, objectives, goals, activities and strategies,
as a part of strategic planning of Kadir Has University, by Dr. Kadri Mirze, 2006, incampus workshop, Kadir Has University.
Istanbul Kültür University [2003-2005]
Faculty of Engineering and Architecture
Industrial Engineering Department
Assistant Professor
a. Teaching
Courses
IE 211 Production Planning and Control
IE 009 Computer Integrated Manufacturing
Type
Core
Core
Level
Term
Graduate
Fall’04
Undergraduate Spring’04
Fall’04
Elective Undergraduate Spring’04
Summer’04
Spring’05
Summer’05
IE 011 Enterprise Resource Planning
16
Summer’04
Spring’05
Summer’05
Core
Summer’04
Spring’05
Summer’05
Core
Spring’05
Elective Undergraduate Summer’04
Fall’04
Summer’05
IE 842 Decision Support and Artificial
Intelligence
Core
IE 855 Quality Engineering
IE 890 Final Project
IE 754 Supply Chain Management
b. Departmental Services






Academic Committee Member in the Department
Prepared a draft for Engineering Management graduate program
Academic Committee Member in the Faculty
Implemented ERP software: SAP R/3
ERP Coordinator for SAP R/3 and IAS-CANIAS
Web Coordinator of the Department
University of Toronto [June-August 1998]
Visiting Researcher as Ph.D. Candidate, UNIVERSITY OF TORONTO, Ontario, CANADA
Istanbul Technical University [1989-1993]
Faculty of Business Administration
Research and Teaching Assistant
a. Courses Assisted













Computer Integrated Manufacturing (CIM)
Computer Programming using BASIC
Computer Programming using MS-COBOL
Data Processing in Industrial Systems
Facility Planning
Introduction to Industrial Engineering
Introduction to Measurement and Machine Tools
Machine and Cutting Tools
Production Planning and Control
Quality Control
Statistics
System Simulation
Technical Drawing
b. Departmental Services
17





Scheduled and realized CNC programming trainings for senior students in CNC
laboratory
Organized any seminar, congress and symposium held in the faculty as a member of
its organization committee
Carried out all organizational tasks and responsibilities assigned in the faculty, as well
as I.E. Department
Contributed to seminars and symposiums as a lecturer on my interest fields
Established CNC laboratory for CNC programming training in the I.E. Department.
c. Training


I-DEAS 6.0 CAD Course, Momentum, 1993, Istanbul, TURKEY.
Advanced English Course organized for the University Assistants by High Education
Council of TURKEY (YÖK), and given by English Preparation School of Marmara
University, July-August 1990.
8.2. Industrial
Magna International, Inc. [2000-2003]
CAD Engineer, MAGNA INTERNATIONAL, Inc., Cam-Slide Mfg., Ontario, CANADA
Department of Product Engineering







Developed concept drawings for product development and/or program improvement
and utilized information pertaining to measurements & technical requirements to design
tools equipment, plan layouts, fixture design and primary products for new launches
and in response to product changes which affect production.
Designed new automotive seating systems (seat frame & mechanisms) mostly consist
of metal stamped parts by bolting and welding, and modified existing systems, by using
SDRC I-DEAS Master Series/C3P 7.0-8.0 for Ford Motor Co. on UNIX operating
system of a SUN workstation.
Modified and plotted any individual seating part, assembly and their drawings by using
PDGS 26.20, and converted data files to C3P from PDGS 26.20.
Prepared drawings from multiple views (three dimensional, sectional profiles, assembly
and sub-assembly drawings) and transferring data between different CAD systems,
designing parts, creating drawings, plotting drawings and analyzing interference in
assembly and sub-assembly systems.
Exchanged CAD data files with suppliers and in-site employees through internet.
Knowledge of FORD CAD & Drafting Specifications.
Regular communication with members of the Engineering R&D staff to receive
direction in design and with the manufacturing engineering team, suppliers and
customers, to ensure customer requirements are met and to ensure the feasibility of
designs in the manufacturing process.
Projects


The development of adjustable airbag system for 2003 Model FORD cars. In this
system, the blown-up speed of airbag can be adjusted to the seating position of the
occupant by using the sensor placed at the bottom of the seat.
The development of child seat to the occupant seat for more safety.
Training

IBM CATIA V4, Basics & Solid Design (5 days), Maverick Solutions Inc., 2000,
18


Toronto, CANADA
IBM CATIA V4, Generative Drafting (2 days), Maverick Solutions Inc., 2000, Toronto,
CANADA
PDGS 26.20 Training (5 days), Virtual Services Inc., 2000, in Dearborn-Detroit, MI,
U.S.A.
Mold-Masters Ltd. [1998-2000]
Engineering Designer, MOLD-MASTERS LTD., Ontario, CANADA
Department of Engineering, International Operations






The final checking & approving of the drawings (assembly/manufacturing) designed by
designers and checked by engineering checkers before being sent to customer
(assembly) and manufacturing plant (manufacturing).
Designed highly-complicated custom hot runner and bridge systems for plastics
injection molding systems, and produced their assembly and manufacturing drawings
in cooperation with application engineers according to customer & manufacturing plant
specifications by using SDRC I-DEAS Master Series 6.0-7.0 and WEBER Synergy
CAD Tool (variational CAD package).
Assisted to new designers & engineering students on how to use CAD tools effectively
in hot runner design.
Created, modified and released BOM (Bill-of-Material) for orders, and helped to be
work orders tracked, organized and managed using SAP R/3 on Windows NT operating
system.
Created IGES files for standard hot runner assembly systems and sent to customers as
zipped by WinZip, created manifold IGES files for custom hot runner orders to generate
their NC program for CNC machining in CAM department.
Created the system tiff files to attach them to the relevant sales orders, so that they can
be not only viewed later, but also used for quoting process on future orders.
Projects

Automation of drawing checking operations in company’s engineering department:
Decreased the drawing checking time together with eliminating paper waste in order to
improve drawing lead times in the engineering department.
Training


WEBER-Synergy (5 days), Variational CAD tool, in-site training, 1999.
SAP R/3 (Navigation, configuration products - process overview, sales inquires,
engineering BOM (Bill-of-Material) maintenance and document management), in-site
training, 2000.
Makina Takim Endustrisi A.S. [1995-1998]
Construction Department Chief, MAKINA TAKIM ENDUSTRISI A.S., Kocaeli, TURKEY



Implemented CAD system with over $ 100,000 investment in order to design any kind
of cutting tool using SDRC I-DEAS Master Series 6.0 (2D & 3D) running on UNIX
operating system of HP workstation.
Trained designers and engineers on how to use I-DEAS Master Series 6.0 more
efficiently in cutting tool design.
Managed cutting tool design process to not only implement existing products, but also
19








develop new products in design department of this firm, that has over $ 45 million sales.
Approved final custom cutting tool drawings for manufacturing which before they are
released.
Helped to 2 designers and an engineer to develop for custom-made carbide-tipped tool
holders using I-DEAS Master Series 6.0 in cooperation with sales engineers, in
addition to my supervisory tasks.
Prepared a couple of national cutting tool standards regarding twist drills, spot drills,
centre drills sub-land twist drills so on, as an expert on these subjects in Turkish
Standardization Institution (TSE)
Developed a couple of computer programs using MS-Cobol & QBasic to solve technical
problems causing loss of design and manufacturing time, which were manually done
before.
Kept up-to-date of ISO 9000 documents and procedures on design issues in the
department.
Kept alert the department against internal and external audits.
Assisted to “Continuous Improvement Program“ to be successful in this company.
Followed up and updated the technical documents and standards as per ISO 9000
system.
Projects



As a reporter in TSE, prepared an national standard regarding various cutting tools based
on their ISO standards (ISO 5468 : 92, ISO 235 : 80, ISO 3292 : 95, ISO 3291 : 95, ISO
494 : 75, ISO 5419 : 82, ISO/DIS 10899 : 75, ISO 10898 : 92, ISO 3314 : 75, ISO 3438
: 75, ISO 3439 : 75, ISO 4780, ISO 296 ), 1996, Ankara, TURKEY
Established “CAD system for EDS I-DEAS Master Series“ for cutting tool design in
Makina Takim Endustrisi A.S., Kocaeli, TURKEY.
Developed an computer software using QBasic to calculate “the best gear configuration
used in manufacturing of relief angle of taps with twist channels“ in Makina Takim
Endustrisi A.S., Kocaeli, TURKEY
Training




AMD (AutoCAD Mechanical Desktop 2.0 & Genius 14) (2 days), Sayisal Grafik,
1998, TURKEY
EDS I-DEAS Master Series-3D Solid Modeling Course (5 days), Momentum, Istanbul,
TURKEY, 1996
Machining Economy & Cutting tools (4 days), Makina Takim Endustrisi A.S.,
Istanbul, TURKEY, 1997
EDS I-DEAS Master Series-2 D Drafting Course (2 days), Momentum, 1996,
TURKEY
Enka Holding A.S., Pimas A.S. [1993-1995]
Quality Assurance - QA Engineer, ENKA HOLDING A.S. - PIMAS A.S., Kocaeli, TURKEY


As Project Coordinator at Manufacturing Plant to establish ISO 9001 Quality
Assurance System in the plant with 90 million $ (in 1994), that designs and
manufacturers plastics window profiles with their accessories by extrusion technology.
Managed all the training activities on ISO 9000 & Total Quality Management (TQM)
for white and blue collar employees at all organizational levels of the plant.
20


Prepared an organization handbook of the company that contains all tasks and
responsibilities of employees at every organization level, organizational charts,
information regarding profiles and statistics of employees etc.
Production planning and control activities for some suppliers for the materials (i.e. raw,
semi-product, product).
Training






Introduction to ISO/TS 16949 Quality Assurance System, in-site training, 2002
Steps of Passing to Application of ISO 9000 Standards, MESS, May 11th, 1994
Internal Auditing, MESS, July 18-19, 1994
Preparation and Application to ISO 9000, Quality Improvement Center, Sep 15-17th,
1994.
ISO 9000 Procedure Writing, MESS, May 13th, 1994
Calibration, ISO Consulting, March 30th, 1995
8.3. Internships




[Truck Manufacturer] - OTOYOL A.S., joint venture of FIAT, ITALY (heavy & light
truck assembly plant), Summer 1984
[Machine Tool Manufacturer] - TEZSAN A.S., Summer 1988
[Telecommunication & Electronic Device Manufacturer] - SIEMENS A.G., TURKEY
for M.Sc. thesis study (1990–1991)
[University] Istanbul Technical University (ITU)-Machine Tools Workshop, Istanbul,
TURKEY (Summer 1985)
21
9. Publications
9.1. Refereed Journal Articles
[Publication Dates-newest to oldest. Please send an e-mail (zekia@khas.edu.tr) to have a copy of the articles published].
More information on publications and citations, please visit the ResearchID®, and also see Google Scholar®,
Microsoft Academic Search®
[Working Papers]
[1] AYAG, Z. (2016) “A multiple-criteria decision making tool for evaluating design
packages in a product innovation process”
[2] AYAG, Z. (2016) “Quality function deployment and analytic hierarchy process in a
new product design”
[3] AYAG, Z. (2016) “QFD methodology for evaluating supply chain strategies in
automotive industry”
[4] AYAG, Z. (2016) “A multiple-criteria decision making method for evaluating solar
power plant location alternatives”
[In-Review]
[5] AYAG, Z. (2014) “An intelligent approach to employee performance evaluation”
[International Journal of Industrial Engineering: Theory, Applications and Practice]
[SCI-E®] [In-Review]
[6] AYAG, Z. (2014) “QFD-based approach for effective management for ground
operations of an airline company” [European Journal of Industrial Engineering]
[SCI-E®] [In-Review]
[In-Press]
[7] SAMANLIOGLU, F., AYAG, Z. (2015) “Fuzzy ANP-based PROMETHEE II
approach for machine tool selection problem” [International Journal of Intelligent
and Fuzzy Systems] [SCI-E®] [In-Press]
[8] AYAG, Z. (2014) “An integrated approach to concept evaluation in a new product
development” [Journal of Intelligent Manufacturing] [SCI-E®] [In-Press]
[9] AYAG, Z., SAMANLIOGLU, F. (2014) “An intelligent approach to supplier
evaluation in automotive sector” [Journal of Intelligent Manufacturing] [SCI-E®]
[In-Press]
[10] AYAG, Z. (2015) “A fuzzy ANP approach to evaluate computer simulation
packages” [International Journal of Business and Systems Research] [In-Press]
22
[Published]
[11] AYAG, Z. (2015) “CAD software evaluation for product design to exchange data in
a supply chain network”, International Journal of Supply Chain Management, Vol.4,
No.1, 30-38
[12] AYAG, Z. (2014) “A fuzzy analytic hierarchy process to evaluate computer-aided
manufacturing software alternatives”, Turkish Journal of Fuzzy Systems, Vol.5,
No.2, 114-127
[13] AYAG, Z. (2014) “An intelligent approach to prioritize logistics requirements in
food industry”, International Journal of Supply Chain Management, Vol.3, No.4, 2938
[14] AYAG, Z., SAMANLIOGLU, F., BUYUKOZKAN, G. (2013) “A fuzzy QFD
approach to determine supply chain management strategies in the dairy industry”,
Journal of Intelligent Manufacturing, Vol.24, No.6, 1111-1122 [SCI-E®].
[15] AYAG, Z., OZDEMIR, R.G. (2012) “Evaluating machine tool alternatives through
modified TOPSIS and alpha-cut based fuzzy ANP”, International Journal of
Production Economics, Vol.140, 630-636 [SCI-E®].
[16] AYAG, Z., OZDEMIR, R.G. (2011) “An intelligent approach to machine tool
selection through fuzzy analytic network process”, Journal of Intelligent
Manufacturing, Vol.22, No.2, 163-177 [SCI-E®].
[17] OZDEMIR, R.G., AYAG, Z. (2011) “An integrated approach to evaluating
assembly-line design alternatives with equipment selection“, Production Planning
and Control, Vol.22, No.2, 194-206 [SCI-E®].
[18] AYAG, Z. (2010) “A combined fuzzy AHP-simulation approach to CAD software
selection”, International Journal of General Systems, Vol.39, No.7, 731-756 [SCI®].
[19] AYAG, Z., OZDEMIR, R.G. (2009) “A hybrid approach to concept selection
through fuzzy analytic network process”, Computers and Industrial Engineering,
Vol.56, No.1, 368-379 [SCI-E®].
[20] AYAG, Z., OZDEMIR, R.G. (2007) “A combined fuzzy AHP-goal programming
approach to assembly-line selection“, Journal of Intelligent and Fuzzy Systems,
Vol.18, No.4, 345-362 [SCI-E®].
[21] AYAG, Z., OZDEMIR, R.G. (2007) “An analytic hierarchy process-based approach
to concept evaluation in a new product development environment”, Journal of
Engineering Design, Vol.18, No.3, 209-226 [SCI-E®].
[22] AYAG, Z. (2007) “A hybrid approach to machine tool selection through AHP and
simulation“, International Journal of Production Research, Vol.45, No.9, 2029-2050
[SCI®].
23
[23] AYAG, Z., OZDEMIR, R.G. (2007) “An intelligent approach to ERP software
selection through fuzzy ANP”, International Journal of Production Research, Vol.45,
No.10, 2169-2194 [SCI®].
[24] AYAG, Z., OZDEMIR, R.G. (2006) “A fuzzy AHP approach to evaluating machine
tool alternatives“, Journal of Intelligent Manufacturing, Vol.17, No.2, 179-190 [SCIE®].
[25] AYAG, Z. (2005) “A fuzzy AHP-based simulation approach to concept evaluation
in a NPD environment“, IIE Transactions, Vol.37, No.9, 827-842 [SCI®].
[26] AYAG, Z. (2005) “An integrated approach to evaluating conceptual design
alternatives in a new product development environment“, International Journal of
Production Research, Vol.43, No.4, 687-713 [SCI®].
[27] AYAG, Z. (2002) “An analytic-hierarchy-process based simulation model for
implementation and analysis of computer-aided systems“, International Journal of
Production Research, Vol.40, No.13, 3053-3073 [SCI®].
9.2. Refereed Proceedings
[28] OZDEMIR, R.G., AYAG, Z. (2015) “Integrated fuzzy Monte Carlo simulation
model and branch and bound algorithm for solving scheduling in filling process”,
The 4rd International Fuzzy Systems Symposium (FUZZYSS’15), November 5-6,
2015, İstanbul, TURKEY.
[29] AYAG, Z. (2015) “A multiple-criteria decision making method for evaluating solar
power plant location alternatives”, The 9th International Management Conference
(IMC’15), November 5-6, 2015, Bucharest, ROMANIA.
[30] AYAG, Z. (2014) “Quality function deployment approach to evaluate supply chain
strategies in Turkish automotive industry”, The 14th International Conference-The
International Institute of Social and Economic Sciences (IISES’14), October 28-31,
2014, La Valetta, MALTA.
[31] AYAG, Z. (2014) “QFD approach to determine supply chain management
strategies in automotive sector”, The 2nd International Conference on Tourism,
Transport, and Logistics (ICTTL’14), April 3-4, 2014, Prague, CZECH REPUBLIC.
[32] AYAG, Z. (2013) “Technology management in new product development
environment”, IX. Workshop on Industrial and Management Engineering, The
Chamber of Mechanical Engineers in Turkey: Eskisehir Branch, December 6-7,
Eskisehir, TURKEY [in-Turkish]
[33] AYAG, Z., OZDEMIR, R.G. (2013) “A fuzzy AHP-based approach to employee
performance evaluation”, The 3rd International Fuzzy Systems Symposium
(FUZZYSS’13), October 24-25, 2013, İstanbul, TURKEY.
[34] DURAK, M.Y., OZDEMIR, R.G., FAKI, F., AYAG, Z. (2013) “Selection of subcontractor for cutting operation in textile industry using fuzzy TOPSIS”, The 3rd
24
International Fuzzy Systems Symposium (FUZZYSS’13), October 24-25, 2013,
İstanbul, TURKEY.
[35] AYAG, Z. (2013) “An intelligent approach to computer-aided design software
evaluation”, The 3rd International Fuzzy Systems Symposium (FUZZYSS’13),
October 24-25, 2013, İstanbul, TURKEY.
[36] AYAG, Z. (2013) “A quality function deployment application for airline ground
operations management”, The 1st International Sustainable Airline Management
Conference (ISAMC’14), August 29, İstanbul, TURKEY.
[37] AYAG, Z. (2012) “An intelligent approach to CAM software selection”, The 2nd
International Conference on Communications, Computing and Control Applications
(CCCA’12), December 6-8, 2012, Marseilles, FRANCE [Listed by Web of
Science®].
[38] YUCEKAYA, A., AYAG, Z., SAMANLIOGLU, F. (2012) “Option pricing for
electricity commodity in Turkish Power Market”, The 3rd International Conference
on Industrial Engineering and Operations Management (IEOM’12), July 3-6, 2012,
Istanbul, TURKEY.
[39] YUCEKAYA, A., SAMANLIOGLU, F., AYAG, Z. (2012) “Compressed air energy
storage systems: Current, future and operational analysis”, The 5th International
Mechanical Engineering Forum, 20-22 June, 2012, Prague, CZECH REPUBLIC.
[40] AYAG, Z., OZDEMIR, R.G. (2012) “CAD software selection through fuzzy AHP”,
The 5th International Mechanical Engineering Forum, 20-22 June, 2012, Prague,
CZECH REPUBLIC.
[41] OZDEMIR, R.G., AYAG, Z. (2012) “A two stage approach for distribution network
design problem in cosmetic and cleaning industry”, The 25th European Conference
on Operational Research (Euro’12), July 8-11, Vilnius, LITHUANIA.
[42] AYAG, Z. (2012) “Concept evaluation through multiple-criteria decision making
methods: An evaluation and new approaches”, The 8th International DAAAM Baltic
Conference (DAAAM’12), April 19-21, 2012, Tallinn, ESTONIA.
[43] AYAG, Z., SAMANLIOGLU, F., YUCEKAYA, A. (2012) “Intelligent approach to
simulation software evaluation”, The 3rd International Conference on Industrial
Engineering and Operations Management (IEOM’12), July 3-6, 2012, Istanbul,
TURKEY.
[44] SAMANLIOGLU, F., YUCEKAYA, A., AYAG, Z. (2012) “A network model for
location-routing decisions of a logistics company”, ISERC Annual Conference and
Expo 2012 (ISERC’12), May 19-23, Florida, USA.
[45] SAMANLIOGLU, F., AYAG, Z., YUCEKAYA, A. (2012) “A fuzzy TOPSIS
Approach for nuclear power plant site selection”, The 3rd Annual Conference of the
European Decision Sciences Institute (EDSI’12), June 24-27, Istanbul, TURKEY.
25
[46] AYAG, Z., SAMANLIOGLU, F., YUCEKAYA, A. (2011) “Concept evaluation in
a NPD environment: An integrated approach”, The 2nd International Fuzzy Systems
Symposium (FUZZYSS`11), November 17-18, 2011, Ankara, TURKEY.
[47] YUCEKAYA, A., AYAG, Z., SAMANLIOGLU, F. (2011) “Evaluating the energy
dependency of Balkan countries and the effect of the natural gas pipelines”,
International Balkan Annual Conference (IBAC’11), May 9-13, Skopje,
MACEDONIA.
[48] SAMANLIOGLU, F., AYAG, Z., YUCEKAYA, A., ELIBOL, D., DEPE, I.,
OZDEMIR, G., DAVARCI, C.E. (2011) “A location-routing model for regional
blood banks”, IX. International Logistics and Supply Chain Congress (LMSCM’11), October 27-29, Yasar University, Izmir, TURKEY.
[49] YUCEKAYA, A., AYAG, Z. (2011) “Analyzing energy plans of Turkey in the light
of increasing energy demand and fuel costs”, VIII. Workshop on Industrial and
Management Engineering, The Chamber of Mechanical Engineers in Turkey: Bursa
Branch, November 24-26, Bursa, TURKEY [in-Turkish].
[50] AYAG, Z., YUCEKAYA, A. (2011) “Evaluating ERP software investments in
terms of project management and risk factors”, VIII. Workshop on Industrial and
Management Engineering, The Chamber of Mechanical Engineers in Turkey: Bursa
Branch, November 24-26, Bursa, TURKEY [in-Turkish].
[51] OZDEMIR, R.G., AYAG, Z., KARACA, N. (2011) “A production planning
approach under assembly-line balancing constraints in textile sector”, XI. National
Production Research Symposium (UAS`11), June 23-24, Istanbul Ticaret
University, Istanbul, TURKEY [in-Turkish]
[52] YUCEKAYA, A., AYAG, Z., SAMANLIOGLU, F. (2011) “Price taker bidding for
power plants in Turkish Power Market”, The 3rd International Conference on
Applied Operational Research (ICAOR`11), August 24-27, Bahcesehir University,
Istanbul, TURKEY.
[53] SAMANLIOGLU, F., AYAG, Z., YUCEKAYA, A., KILIC, A., BALKUVAR, I.,
CIKRIKCI, Z. (2011) “A mathematical model for ambulance location and
deployment”, The 3rd International Conference on Applied Operational Research
(ICAOR`11), August 24-27, Bahcesehir University, Istanbul, TURKEY.
[54] AYDEMIR, T., KARA, D.G., KOCABACAK, I., YILDIRIM, B., AYAG, Z. (2011)
“Evaluating bank alternatives through ANP”, XXXI. Operation Research and
Industrial Engineering National Congress (YA/EM`11), July 5-7, Sakarya
University, Kocaeli, TURKEY [in-Turkish]
[55] OZDEMIR, R.G., Z., AYAG, Z., OZDEMIR, A., AKSU, G. (2011) “An
mathematical approach for hierarchical production planning in food packaging
industry”, XXXI. Operation Research and Industrial Engineering National Congress
(YA/EM`11), July 5-7, Sakarya University, Kocaeli, TURKEY [in-Turkish]
26
[56] YUCEKAYA, A., AYAG, Z. (2011) “Cost and SO2 minimizing coal resource
selection for power plants”, The 21st International Conference on Multiple Criteria
Decision Making (MCDM’11), June 13-17, 2011, Jyvaskyla, FINLAND.
[57] AYAG, Z., YUCEKAYA, A. (2011) “Alpha-cut fuzzy analytic network process
based approach to evaluate simulation software packages”, The 11th International
Symposium on the Analytic Hierarchy Process and Analytic Network Process
(ISAHP’11), June 15-18, 2011, Sorrento, Naples, ITALY.
[58] AYAG, Z. (2011) “Evaluating simulation software alternatives through ANP”, The
2th International Conference on Industrial Engineering and Operations Management
(IEOM’11), January 22-24, 2011, Kuala Lumpur, MALAYSIA.
[59] YUCEKAYA, A., AYAG, Z., SAMANLIOGLU, F. (2010) “Economic evaluation
of wind power investments through multi-year simulation and operational
constraints”, 2. International Conference on Nuclear and Renewable Energy
Resources (NURER’10), July 4-7, Gazi University, Ankara, TURKEY.
[60] GUN, E., CETINTAS, F., OZDEMIR, R.G., AYAG, Z. (2010) “Estimation model
to determine optimal lot size for a two-stage inventory system”, X. National
Production Research Symposium (UAS’10), September 16-18, Girne American
University, Girne, CYPRUS [in-Turkish]
[61] YUCEKAYA, A., AYAG, Z., SAMANLIOGLU, F. (2010) “ERP software selection
through AHP in a project-based production company”, X. National Production
Research Symposium (UAS’10), September 16-18, Girne American University,
Girne, CYPRUS [in-Turkish]
[62] SAMANLIOGLU, F., AYAG, Z., YUCEKAYA, A. (2010) “Multiple-criteria
crossdocking model with flexible time window ”, X. National Production Research
Symposium (UAS’10), September 16-18, Girne American University, Girne,
CYPRUS [in-Turkish]
[63] AYAG, Z., SAMANLIOGLU, F., YUCEKAYA, A. (2010) “Fuzzy AHP approach
to CAD software selection problem”, X. National Production Research Symposium
(UAS’10), September 16-18, Girne American University, Girne, CYPRUS [inTurkish]
[64] GOKOLUK, S.S., TASDEMIR, E.E., KIRGOZ, D., CAKIR, H., YUCEKAYA, A.,
AYAG, Z., SAMANLIOGLU, F. (2010) “A mixed integer multi-period capital
budgeting model for investment companies”, XXX. Operation Research and
Industrial Engineering National Congress (YA/EM`10), June 30- July 2, Sabancı
University, Istanbul, TURKEY.
[65] ALACAN, M., OZAL, C., CETINKAYA, I., ALTIOK, I., KOL, G., YUCEKAYA,
A., AYAG, Z., SAMANLIOGLU, F. (2010) “A personnel supply planning system
for hospital call centers”, XXX. Operation Research and Industrial Engineering
National Congress (YA/EM`10), June 30- July 2, Sabancı University, Istanbul,
TURKEY [in-Turkish]
27
[66] SAMANLIOGLU, F., SEZENLER, E., AYAG, Z., YUCEKAYA, A. (2010) “A
hazardous waste location-routing problem”, XXX. Operation Research and
Industrial Engineering National Congress (YA/EM`10), June 30- July 2, Sabancı
[67] ELIBOL, D., DEPE, I., OZDEMIR, G., DAVARCI, C.E., SAMANLIOGLU, F.,
AYAG, Z., YUCEKAYA, A. (2010) “A logistics, location and routing problem of
Istanbul Kızılay blood banks”, XXX. Operation Research and Industrial Engineering
National Congress (YA/EM`10), June 30- July 2, Sabancı University, Istanbul,
TURKEY [in-Turkish]
[68] ALEV, K., CIKRIKCI, Z., BALKUVAR, I., SAMANLIOGLU, F., AYAG, Z.,
YUCEKAYA, A. (2010) “A location problem of first aid ambulances”, XXX.
Operation Research and Industrial Engineering National Congress (YA/EM`10),
June 30- July 2, Sabancı University, Istanbul, TURKEY [in-Turkish]
[69] KAYAKUS, O., ERGIN, D., SAMANLIOGLU, F., AYAG, Z., YUCEKAYA, A.
(2010) “A mathematical model of pandemic influenza A/H1N1”, XXX. Operation
Research and Industrial Engineering National Congress (YA/EM`10), June 30- July
2, Sabancı University, Istanbul, TURKEY [in-Turkish]
[70] DUMAN, B., ERDEM, M., ISIK, E.N., OZKAYA, E., AYAG, Z.,
SAMANLIOGLU, F., YUCEKAYA, A. (2010) “Cloth selection problem for
passenger seats in public transport vehicles through TOPSIS”, XXX. Operation
Research and Industrial Engineering National Congress (YA/EM`10), June 30- July
2, Sabancı University, Istanbul, TURKEY [in-Turkish]
[71] HAS, M., TASKIRAN, I., TURKYILMAZ, M., AYAG, Z., SAMANLIOGLU, F.,
YUCEKAYA, A. (2010) “Evaluating shopping center location alternatives through
ANP: A case study”, XXX. Operation Research and Industrial Engineering National
Congress (YA/EM`10), June 30- July 2, Sabancı University, Istanbul, TURKEY [inTurkish]
[72] AYAG, Z., SAMANLIOGLU, F., YUCEKAYA, A. (2010) “Fuzzy analytic network
process approach to shopping center location selection problem”, VIII. International
Logistics and Supply Chain Congress (LM-SCM’10), November 4-5, Maltepe
[73] OZDEMIR, R.G., AYAG, Z. (2010) “Fuzzy ANP-based modified TOPSIS for
machine tool selection problem”, XVI. International Working Seminar on
Production Economics (IWSPE’10), March 1-5, Innsbruck, AUSTRIA.
[74] SAMANLIOGLU, F., AYAG, Z. (2010) “Determining master schedule of surgical
operations by integer programming: A case study”, IIE Annual Conference and
Expo 2010 (IERC’10), June 5-9, Cancun, MEXICO.
[75] AYAG, Z., SAMANLIOGLU, F., (2010) “Analytic Network Process (ANP) for
solar power plant location problem”, IIE Annual Conference and Expo 2010
(IERC’10), June 5-9, Cancun, MEXICO.
28
[76] AYAG, Z., OZDEMIR, R.G. (2009) “Fuzzy ANP-based modified TOPSIS for
concept selection problem”, I. International Fuzzy Systems Symposium
(FUZZSS’09), TOBB University of Economics and Technology, October 1-2,
Ankara, TURKEY.
[77] AYAG, Z., BUYUKOZKAN, G., SAMANLIOGLU, F. (2009) “A fuzzy QFD
approach to determine logistics requirements in food industry”, VII. International
Logistics and Supply Chain Congress (LM-SCM’09), Nov 5-6, Istanbul, TURKEY.
[78] AYAG, Z., SAMANLIOGLU, F. (2009) “Concept selection in a NPD environment
through AHP/ANP: A comparative study“, IIE Annual Conference and Expo 2009
(IERC’09), May 30-June 3, Miami, U.S.A.
[79] SAMANLIOGLU, F., AYAG, Z. (2009) “A cross-docking model with soft time
windows“, IIE Annual Conference and Expo 2009 (IERC’09), May 30-June 3,
Miami, U.S.A.
[80] AYAG, Z., SAMANLIOGLU, F., OZPAMUK, T., ERTEM, S.,
GUMULCINELIOGLU, C. (2009) “Fuzzy analytic hierarchy process (FAHP) to
evaluate solar power plant location alternatives”, XXIX. Operation Research and
Industrial Engineering National Congress (YA/EM`09), 22-24 June, Bilkent
University, Ankara, TURKEY.
[81] SAMANLIOGLU, F., AYAG, Z., ESEN, E.E., GUNDUZ, A., POLAT, M.O.,
TAVSANLI, S., OZAK, F. (2009) “Route improvement for a courier truck: A case
study”, XXIX. Operation Research and Industrial Engineering National Congress
(YA/EM`09), 22-24 June, Bilkent University, Ankara, TURKEY.
[82] BUYUKOZKAN, G., AYAG, Z., CAKA, E., OZGUNDUZ, G., SAHIN, G. (2008)
”Determining the supply chain strategies in food industry: A proposed model and its
application”, VIII. National Production Research Symposium (UAS’08), 24-25
October, organized by Istanbul University and Istanbul Kültür University, Istanbul,
TURKEY [in-Turkish]
[83] AYAG, Z., OZDEMIR, R.G. (2008) “The evaluation of ERP software through fuzzy
replacement analysis and analytic network process“, XXVIII. Operation Research
and Industrial Engineering National Congress (YA/EM`08), 30 June-2 July,
Galatasaray University, Istanbul, TURKEY.
[84] SAMANLIOGLU, F., AYAG, Z., ERCAN, B.B., YETİM, M. (2008) “Application
of a bi-objective ambulance location model“, XVIII. Operation Research and
Industrial Engineering National Congress (YA/EM`08), 30 June-2 July, Galatasaray
[85] SAMANLIOGLU, F., AYAG, Z. (2008) “OR/MS research in hazardous waste
management“, XXVIII. Operation Research and Industrial Engineering National
Congress (YA/EM`08), 30 June-2 July, Galatasaray University, Istanbul, TURKEY.
[86] AYAG, Z., SAMANLIOGLU, F., TURKMEN, E., OZTURK, V., KOTEK, H.
(2008) “Facility site location through analytic network process)“, XXVIII.
29
Operation Research and Industrial Engineering National Congress (YA/EM`08), 30
June-2 July, Galatasaray University, Istanbul, TURKEY [in-Turkish]
[87] AYAG, Z., SAMANLIOGLU, F., DALGIC, M.S., EKSI, M., EROL, Y.A. (2008)
“A software development for product costing through activity-based costing“,
XXVIII. Operation Research and Industrial Engineering National Congress
(YA/EM`08), 30 June-2 July, Galatasaray University, Istanbul, TURKEY [inTurkish]
[88] OZDEMIR, R.G., AYAG, Z. (2008) “Equipment selection in an assembly-line
design through fuzzy replacement analysis and analytic network process”, XV.
International Working Seminar on Production Economics (IWSPE’08), March 3-7,
Innsbruck, AUSTRIA.
[89] DANACI SAKALAR, T., AYAG, Z. (2008) “Technology road-mapping for
effective new product development process”, II. National System Engineering
Congress, Yıldız University, February 6-8, Istanbul, TURKEY [in-Turkish]
[90] OZDEMIR, R.G., AYAG, Z. (2007) “An integrated approach to assembly-line
selection”, IX. International Symposium on Analytic Hierarchy Process
(ISAHP’2007), August 3-6, Viña del Mar, CHILE.
[91] DANACI, T., AYAG, Z. (2007) “Technology management for effective new
product development process”, VI. Workshop on Industrial and Management
Engineering, The Chamber of Mechanical Engineers in Turkey: Bursa Branch,
November 9-10, Bursa, TURKEY [in-Turkish]
[92] AYAG, Z., BUYUKOZKAN, G., TUFEKCIOGLU, M., GUREL, S., OZDEMIR, S.
(2007) “An ANP-based application for supplier selection in automotive industry“,
XXVII. Operation Research and Industrial Engineering National Congress
(YA/EM`07), 2-4 July, Dokuz Eylul University, Izmir, TURKEY [in-Turkish]
[93] AYAG, Z., OZDEMIR, R. G. (2007) “Enterprise resource planning (ERP) system
investments and analysis”, Dynamics 2007-Management of Investments and Project
Risks, National Project Management Congress, 13-14 April, Kadir Has University,
Istanbul, TURKEY [in-Turkish]
[94] OZDEMIR, R. G., AYAG, Z., KULA, U., INCE, O. (2006) “A case study in supply
chain management using 0-1 integer goal programming“, XXVI. Operation
Research and Industrial Engineering National Congress (YA/EM`06), 3-5 July,
Kocaeli University, Kocaeli, TURKEY [in-Turkish]
[95] AYAG, Z., OZDEMIR, R.G., YELKEN, B. (2005) “An effective implementation of
an enterprise resource planning (ERP) system with an assessment in a Turkish firm“,
The 3rd International Logistics and Supply Chain Congress, 23-24 November,
Galatasaray University, Istanbul, TURKEY.
[96] INCE, O., AYAG, Z., OZDEMIR, R.G. (2005) “A simulation approach to
minimizing total cost in the supply chain“, The 3rd International Logistics and
30
Supply Chain Congress, 23-24 November, Galatasaray University, Istanbul,
TURKEY.
[97] INCE, O., AYAG, Z., OZDEMIR, R. G. (2005) “The determining of buffer size
capacity in assembly lines)“, XXV. Operation Research and Industrial Engineering
National Congress (YA/EM`05), 4-6 July, Koc University, Istanbul, TURKEY [inTurkish]
[98] GULTAS, I., OZDEMIR, R. G., AYAG, Z. (2005) “Using of investment analysis
techniques for equipment selection in assembly lines under demand
uncertainty“,XXV. Operation Research and Industrial Engineering National
Congress (YA/EM`05), 4-6 July, Koc University, Istanbul, TURKEY [in-Turkish]
[99] AYAG, Z. (2004) “An approach to evaluating machine tool alternatives using
simulation and AHP“, The 4th International Symposium on Intelligent
Manufacturing Systems (SAU’04), 6-8 September, Sakarya University, Sakarya,
TURKEY.
[100] AYAG, Z., OZDEMIR, R. G., YILMAZ A. (2004) “A step-by-step model for
implementing hardware infrastructure of ERP systems“, XXIV. Operation Research
and Industrial Engineering National Congress (YA/EM`04), 15-18 June, Cukurova
University, Adana, TURKEY [in-Turkish]
[101] AYAG, Z., OZDEMIR, R. G., UGUZ H. (2004) “A decision support system for
evaluating ERP packages“, XXIV. Operation Research and Industrial Engineering
National Congress (YA/EM`04), 15-18 June, Cukurova University, Adana,
TURKEY [in-Turkish]
[102] AYAG, Z., OZDEMIR, R. G., BESER M. (2004) “An approach for competitive
advantage by improving integration between marketing and production”, XXIV.
Operation Research and Industrial Engineering National Congress (YA/EM`04), 1518 June, Cukurova University, Adana, TURKEY [in-Turkish]
[103] OZDEMIR, R. G., AYAG, Z., DURSUNOGLU, M. (2004) “A simulation-based
model for capacity improvement in manufacturing systems”, XXIV. Operation
Research and Industrial Engineering National Congress (YA/EM`04), 15-18 June,
Cukurova University, Adana, TURKEY [in-Turkish]
[104] OZDEMIR, R. G., AYAG, Z., CAKIR, D. (2004) “A line balancing method for setup time reduction”, XXIV. Operation Research and Industrial Engineering National
Congress (YA/EM`04), 15-18 June, Cukurova University, Adana, TURKEY [inTurkish]
[105] OZDEMIR, R. G., AYAG, Z., OZTURK, I. (2004) “An economic error measure for
demand forecasting”, XXIV. Operation Research and Industrial Engineering
National Congress (YA/EM`04), 15-18 June, Cukurova University, Adana,
TURKEY [in-Turkish]
[106] AYAG, Z., DINCMEN, M., DURMUSOGLU, M. B., ERTAY, T. (1991) “Expert
simulation systems in production systems”, Symposium of Computer Use and
31
Automation in Industry, I.T.U. in cooperation with Alumni of Berlin Technical
University (TU Berlin) and KOSGEB, Istanbul, TURKEY [in-Turkish]
[107] ERKUT, H., POLAT, S., BOZDAG, C. E., CEYLAN C., BAYRAKTAR, C. A.,
AYAG, Z. (1992) “Investigation of inflation–productivity–interest relationships
using system dynamics modeling“, Advances in Simulation’ 92 Symposium, 6-7
July, Bogazici University, Istanbul, TURKEY [in-Turkish]
[108] AKHUN, M., AYAG, Z., ERTAY, T. (1992) “Simulation of production systems
based on expert systems”, Advances in Simulation ’92 Symposium, 6-7 July,
Bogazici University, Istanbul, TURKEY [in-Turkish]
[109] AYAG, Z., DINCMEN, M. (1993) “Expert systems in industry and an expert system
design for quality control”, XV. Operation Research and Industrial Engineering
National Congress (YA/EM`1993), 7-9 July, Istanbul, TURKEY [in-Turkish]
9.3. Poster Presentations
[110] “Cross docking mathematical model”, The Workshop on Women in Industrial
Engineering Academia 2012 (WIEA’12), May 30-June 1, 2012, Kadir Has
University, Istanbul, TURKEY [with Dr. F. Samanlıoglu]
9.4. Invited Talks
[111] Concept evaluation in a new product development environment through multiplecriteria decision making methods: A review and new approaches, Kadir Has
University, Faculty of Engineering and Natural Sciences, Dec 5, 2014, Istanbul,
TURKEY.
[112] Product design evaluation in a new product development environment, Mondragon
University, Faculty of Engineering, Erasmus Teaching Staff Mobility (TSM)
Program, May 2-7, 2014, Bilbao, SPAIN.
[113] Strategic Management in the 21st Century, Vilnius Gediminas Technical University,
Faculty of Business Management, Erasmus Teaching Staff Mobility (TSM)
Program, April 15-19, 2013, Vilnius, LITHUANIA.
[114] Product design evaluation in a new product development environment, Copenhagen
University, College of Engineering, Erasmus Teaching Staff Mobility (TSM)
Program, May 8-11, 2012, Copenhagen, DENMARK.
[115] Multiple-criteria decision making methods for concept selection in a new product
development environment, Universidad de La Coruña, Escuela Universitaria
Politécnica, Erasmus Teaching Staff Mobility (TSM) Program, April 5-9, 2010,
Ferrol - A Coruña, SPAIN [Planned]
[116] A step-by-step implementation and analysis model of a computer integrated
manufacturing (CIM) system-The overview of CAD/CAM systems: An application
in a Turkish firm, March 1998, Istanbul Technical University, Istanbul, TURKEY
[Turkish]
32
manufacturing (CIM) system: An application in a Turkish firm), March 1997,
Istanbul Technical University, Istanbul, TURKEY[Turkish]
[118] A step-by-step implementation and analysis of a CIM) system: An application),
April 1997, Istanbul Technical University, Istanbul, TURKEY [Turkish]
[119] Introduction to computer-aided process planning (CAPP)), November 1997, Istanbul
Technical University, Istanbul, TURKEY [Turkish]
9.5. Presentations
[120] Innovation in the world: How the South Korea has developed by innovation? India,
China and Silicon Valley, Conference on Innovation and Competitive Advantage,
April 2008, Kadir Has University, Istanbul, TURKEY [in-Turkish]
manufacturing (CIM), 1998, Ph.D. Seminar, Institute of Science and Technology,
Istanbul Technical University, Istanbul, TURKEY [in-Turkish]
[122] The adaptation to the changing: the strategies for excellence, In-House Seminar,
1997, Makina Takim Endustrisi A.S., Kocaeli, TURKEY [in-Turkish]
[123] The implementing of a computer-aided design (CAD) and documentation system,
In-House Seminar, 1997, Makina Takim Endustrisi A.S., Kocaeli, TURKEY [inTurkish]
[124] The developing of a computer software to calculate the required gear group for tap
manufacturing, In-House Seminar, 1996, Makina Takim Endustrisi A.S., Istanbul,
TURKEY [in-Turkish]
9.6. Theses [unpublished]
[125] Ph.D. Thesis: A step-by-step implementation and analysis model for a computer
integrated manufacturing (CIM) system, 2003, Istanbul Technical University,
Istanbul, TURKEY [Turkish]
[126] M.Sc. Thesis: The simulation of a mold manufacturing facility using SIMAN, 1991,
Istanbul Technical University, Istanbul, TURKEY [Turkish]
[127] B.Sc. Thesis: A survey on simulation applications in production systems), 1989,
Istanbul Technical University, Istanbul, TURKEY [Turkish]
9.7. Books and Lecture Notes
[128] Book Chapter: “Fuzzy Analytic Hierarchy Process in Industrial Engineering”, the
Book on Fuzzy Analytic Hierarchy Process, CRC Press, Taylor & Francis Group,
2015 [In-Preparation]
33
[129] Lecture Notes: Introduction to Enterprise Resources Planning (ERP) Systems, based
on the class presentations, Spring 2004 [unpublished]
[130] Translation of Chapter X into Turkish – “Resisting Globalization: Critique and
Action”, in a book of The Globalization Reader, Edited by F. J. LECHNER and J.
BOLI, Second Edition, Blackwell Publishing, 2003.
[131] The booklet of the Workshop on Women in Industrial Engineering Academia 2012(WIEA’12), Kadir Has University, in collaboration with Auburn and Wichita State
Universities.
[132] The Journal Article Book “AHP/ANP Applications in Industrial Engineering:
Selected Works”: Pre-Prints: Volume I, 2014 [unpublished]
[133] The Journal Article Book “AHP/ANP Applications in Industrial Engineering:
Selected Works”: Pre-Prints: Volume II, 2014 [unpublished]
[134] The Conference Paper Book “Applications in Industrial Engineering: Selected
Works”: Pre-Prints: Volume I, 2014 [unpublished]
[135] The Conference Paper Book “Applications in Industrial Engineering: Selected
Works”: Pre-Prints: Volume II, 2014 [unpublished]
[136] Introduction of the Book “AHP/ANP Applications to Concept Evaluation in a New
Product Development”: Pre-Prints: The First Edition, 2014 [Unpublished]
9.8. Others
[137] Article: “Effective project and risk management for a successful ERP
implementation”, MakinaTEK, May 2007 [with T. Danacı] [in-Turkish]
[138] Article: “One of the outstanding professions: industrial engineering”, Kadir Has
Bulletin, April-May 2010, pp. 35-37 [in-Turkish]
[139] Article: “A new century, changing world and industrial engineering”, Panorama
Khas, Summer 2011, No.3, pp. 27-29 [in-Turkish]
34
9.9. Citations by Total: ISI Web of Knowledge (as of December 31st, 2015)
35
36
37
9.10. Citations by Others: List by ISI Web of Knowledge (as of December 31st 2015)
Web of Science™
Page 1 (Records 1 -- 50)
[1]
Record 1 of 50
By: Dagdeviren, M (Dagdeviren, Metin); Yavuz, S (Yavuz, Serkan); Kilinc, N (Kilinc, Nevzat)
Author Identifiers:
Author
ResearcherID Number
DAGDEVIREN, METIN
ORCID Number
0000-0003-2121-5978
Title: Weapon selection using the AHP and TOPSIS methods under fuzzy environment
Source: EXPERT SYSTEMS WITH APPLICATIONS
Volume: 36
Issue: 4
Pages: 8143-8151
DOI: 10.1016/j.eswa.2008.10.016
Published: MAY 2009
Times Cited in Web of Science Core Collection: 116
Times Cited in BIOSIS Citation Index: 17
Times Cited in Chinese Science Citation Database: 6
Times Cited in Russian Science Citation Index: 0
Times Cited in SciELO Citation Index: 1
Total Times Cited: 121
ISSN: 0957-4174
Accession Number: WOS:000264528600097
Record 2 of 50
By: Ertugrul, I (Ertugrul, Irfan); Karakasoglu, N (Karakasoglu, Nilsen)
Title: Performance evaluation of Turkish cement firms with fuzzy analytic hierarchy process and TOPSIS
methods
Volume: 36
Issue: 1
Pages: 702-715
DOI: 10.1016/j.eswa.2007.10.014
Published: JAN 2009
ISSN: 0957-4174
Record 3 of 50
38
By: Jahangirian, M (Jahangirian, Mohsen); Eldabi, T (Eldabi, Tillal); Naseer, A (Naseer, Aisha);
Stergioulas, LK (Stergioulas, Lampros K.); Young, T (Young, Terry)
Author Identifiers:
Author
ResearcherID Number
Jahangirian, Mohsen D-1299-2011
Eldabi, Tillal
ORCID Number
0000-0002-0045-4075
Title: Simulation in manufacturing and business: A review
Source: EUROPEAN JOURNAL OF OPERATIONAL RESEARCH
Volume: 203
Issue: 1
Pages: 1-13
DOI: 10.1016/j.ejor.2009.06.004
Published: MAY 16 2010
ISSN: 0377-2217
Record 4 of 50
By: Ertugrul, I (Ertugrul, Irfan); Karakasoglu, N (Karakasoglu, Nilsen)
Title: Comparison of fuzzy AHP and fuzzy TOPSIS methods for facility location selection
Source: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume: 39
Issue: 7-8
Pages: 783-795
DOI: 10.1007/s00170-007-1249-8
Published: NOV 2008
ISSN: 0268-3768
Record 5 of 50
By: Gungor, Z (Gungor, Zulal); Serhadlioglu, G (Serhadlioglu, Guerkan); Kesen, SE (Kesen, Saadettin
Erhan)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Kesen, Saadettin F-1726-2011
Title: A fuzzy AHP approach to personnel selection problem
Source: APPLIED SOFT COMPUTING
Volume: 9
39
Issue: 2
Pages: 641-646
DOI: 10.1016/j.asoc.2008.09.003
Published: MAR 2009
ISSN: 1568-4946
Record 6 of 50
By: Dagdeviren, M (Dagdeviren, Metin)
Author Identifiers:
Author
ResearcherID Number
DAGDEVIREN, METIN
ORCID Number
0000-0003-2121-5978
Title: Decision making in equipment selection: an integrated approach with AHP and PROMETHEE
Source: JOURNAL OF INTELLIGENT MANUFACTURING
Volume: 19
Issue: 4
Pages: 397-406
DOI: 10.1007/s10845-008-0091-7
Published: AUG 2008
ISSN: 0956-5515
Record 7 of 50
By: Sipahi, S (Sipahi, Seyhan); Timor, M (Timor, Mehpare)
Title: The analytic hierarchy process and analytic network process: an overview of applications
Source: MANAGEMENT DECISION
Volume: 48
Issue: 5-6
Pages: 775-808
DOI: 10.1108/00251741011043920
Published: 2010
ISSN: 0025-1747
40
Record 8 of 50
By: Amiri, MP (Amiri, Morteza Pakdin)
Title: Project selection for oil-fields development by using the AHP and fuzzy TOPSIS methods
Volume: 37
Issue: 9
Pages: 6218-6224
DOI: 10.1016/j.eswa.2010.02.103
Published: SEP 2010
ISSN: 0957-4174
Record 9 of 50
By: Tseng, ML (Tseng, Ming-Lang); Divinagracia, L (Divinagracia, Louie); Divinagracia, R
(Divinagracia, Rochelle)
Author Identifiers:
Author
ResearcherID Number
Tseng, Ming Lang M-9051-2014
ORCID Number
0000-0002-2702-3590
Title: Evaluating firm's sustainable production indicators in uncertainty
Source: COMPUTERS & INDUSTRIAL ENGINEERING
Volume: 57
Issue: 4
Pages: 1393-1403
DOI: 10.1016/j.cie.2009.07.009
Published: NOV 2009
ISSN: 0360-8352
Record 10 of 50
By: Vinodh, S (Vinodh, S.); Ramiya, RA (Ramiya, R. Anesh); Gautham, SG (Gautham, S. G.)
Author Identifiers:
Author
S, Vinodh
ResearcherID Number
ORCID Number
0000-0002-9705-1343
Title: Application of fuzzy analytic network process for supplier selection in a manufacturing organisation
41
Volume: 38
Issue: 1
Pages: 272-280
DOI: 10.1016/j.eswa.2010.06.057
Published: JAN 2011
ISSN: 0957-4174
Record 11 of 50
By: Tuzkaya, G (Tuzkaya, G.); Ozgen, A (Ozgen, A.); Ozgen, D (Ozgen, D.); Tuzkaya, UR (Tuzkaya, U.
R.)
Author Identifiers:
Author
ResearcherID Number
Tuzkaya, Gulfem
ORCID Number
0000-0001-7683-4405
Title: Environmental performance evaluation of suppliers: A hybrid fuzzy multi-criteria decision approach
Source: INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY
Volume: 6
Issue: 3
Pages: 477-490
Published: SUM 2009
ISSN: 1735-1472
Record 12 of 50
By: Aragones-Beltran, P (Aragones-Beltran, Pablo); Pastor-Ferrando, JP (Pascual Pastor-Ferrando, Juan);
Garcia-Garcia, F (Garcia-Garcia, Fernando); Pascual-Agullo, A (Pascual-Agullo, Amadeo)
Author Identifiers:
Author
ResearcherID Number
Aragones-Beltran, Pablo
L-8764-2013
Pastor-Ferrando, Juan-Pascual M-6983-2013
ORCID Number
0000-0003-0538-9409
0000-0001-7125-9464
Title: An Analytic Network Process approach for siting a municipal solid waste plant in the Metropolitan
Area of Valencia (Spain)
Source: JOURNAL OF ENVIRONMENTAL MANAGEMENT
Volume: 91
Issue: 5
Pages: 1071-1086
DOI: 10.1016/j.jenvman.2009.12.007
42
Published: MAY 2010
ISSN: 0301-4797
eISSN: 1095-8630
PubMed ID: 20080331
Record 13 of 50
By: Buyukozkan, G (Buyukozkan, Gulcin); Cifci, G (Cifci, Gizem); Guleryuz, S (Guleryuz, Sezin)
Title: Strategic analysis of healthcare service quality using fuzzy AHP methodology
Volume: 38
Issue: 8
Pages: 9407-9424
DOI: 10.1016/j.eswa.2011.01.103
Published: AUG 2011
ISSN: 0957-4174
eISSN: 1873-6793
Record 14 of 50
By: Buyukozkan, G (Buyukozkan, Gulcin); Cifci, G (Cifci, Gizem)
Title: A combined fuzzy AHP and fuzzy TOPSIS based strategic analysis of electronic service quality in
healthcare industry
Volume: 39
Issue: 3
Pages: 2341-2354
DOI: 10.1016/j.eswa.2011.08.061
Published: FEB 15 2012
ISSN: 0957-4174
Record 15 of 50
43
By: Naghadehi, MZ (Naghadehi, Masoud Zare); Mikaeil, R (Mikaeil, Reza); Ataei, M (Ataei,
Mohammad)
Title: The application of fuzzy analytic hierarchy process (FAHP) approach to selection of optimum
underground mining method for Jajarm Bauxite Mine, Iran
Volume: 36
Issue: 4
Pages: 8218-8226
DOI: 10.1016/j.eswa.2008.10.006
Published: MAY 2009
ISSN: 0957-4174
Record 16 of 50
By: Zhai, LY (Zhai, Lian-Yin); Khoo, LP (Khoo, Li-Pheng); Zhong, ZW (Zhong, Zhao-Wei)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Khoo , Li Pheng A-3817-2011
Zhong, Z.W.
A-3813-2011
Title: Design concept evaluation in product development using rough sets and grey relation analysis
Volume: 36
Issue: 3
Pages: 7072-7079
DOI: 10.1016/j.eswa.2008.08.068
Part: 2
Published: APR 2009
ISSN: 0957-4174
eISSN: 1873-6793
Record 17 of 50
By: Lee, H (Lee, Hakyeon); Kim, C (Kim, Chulhyun); Cho, H (Cho, Hyunmyung); Park, Y (Park,
Yongtae)
Title: An ANP-based technology network for identification of core technologies: A case of
telecommunication technologies
Volume: 36
44
Issue: 1
Pages: 894-908
DOI: 10.1016/j.eswa.2007.10.026
Published: JAN 2009
ISSN: 0957-4174
Record 18 of 50
By: Onut, S (Onut, Semih); Kara, SS (Kara, Selin Soner); Efendigil, T (Efendigil, Tugba)
Author Identifiers:
Author
ResearcherID Number
onut, Semih
ORCID Number
0000-0002-9503-1314
Title: A hybrid fuzzy MCDM approach to machine tool selection
Volume: 19
Issue: 4
Pages: 443-453
DOI: 10.1007/s10845-008-0095-3
Published: AUG 2008
ISSN: 0956-5515
Record 19 of 50
By: Zheng, GZ (Zheng, Guozhong); Zhu, N (Zhu, Neng); Tian, Z (Tian, Zhe); Chen, Y (Chen, Ying); Sun,
BH (Sun, Binhui)
Author Identifiers:
Author
李, 涵
ResearcherID Number
ORCID Number
B-4995-2012
Title: Application of a trapezoidal fuzzy AHP method for work safety evaluation and early warning rating
of hot and humid environments
Source: SAFETY SCIENCE
Volume: 50
Issue: 2
Pages: 228-239
DOI: 10.1016/j.ssci.2011.08.042
Published: FEB 2012
45
ISSN: 0925-7535
Record 20 of 50
By: Promentilla, MAB (Promentilla, Michael Angelo B.); Furuichi, T (Furuichi, T.); Ishii, K (Ishii, K.);
Tanikawa, N (Tanikawa, N.)
Title: A fuzzy analytic network process for multi-criteria evaluation of contaminated site remedial
countermeasures
Source: JOURNAL OF ENVIRONMENTAL MANAGEMENT
Volume: 88
Issue: 3
Pages: 479-495
DOI: 10.1016/j.jenvman.2007.03.013
Published: AUG 2008
ISSN: 0301-4797
eISSN: 1095-8630
PubMed ID: 17467879
Record 21 of 50
By: Lin, YH (Lin, YuanHsu); Cheng, HP (Cheng, Hui-Ping); Tseng, ML (Tseng, Ming-Lang); Tsai, JCC
(Tsai, Jim C. C.)
Author Identifiers:
Author
ResearcherID Number
Tseng, Ming Lang M-9051-2014
ORCID Number
0000-0002-2702-3590
Title: Using QFD and ANP to analyze the environmental production requirements in linguistic
preferences
Volume: 37
Issue: 3
Pages: 2186-2196
DOI: 10.1016/j.eswa.2009.07.065
Published: MAR 15 2010
46
ISSN: 0957-4174
Record 22 of 50
By: Sevkli, M (Sevkli, Mehmet)
Author Identifiers:
Author
ResearcherID Number
Sevkli, Mehmet G-2364-2011
ORCID Number
0000-0002-3127-793X
Title: An application of the fuzzy ELECTRE method for supplier selection
Source: INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
Volume: 48
Issue: 12
Pages: 3393-3405
DOI: 10.1080/00207540902814355
Published: 2010
ISSN: 0020-7543
Record 23 of 50
By: Tsai, WH (Tsai, W-H); Chou, WC (Chou, W-C); Hsu, W (Hsu, W.)
Title: The sustainability balanced scorecard as a framework for selecting socially responsible investment:
an effective MCDM model
Source: JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY
Volume: 60
Issue: 10
Pages: 1396-1410
DOI: 10.1057/jors.2008.91
Published: OCT 2009
ISSN: 0160-5682
Record 24 of 50
By: Li, TS (Li, Te-Sheng); Huang, HH (Huang, Hsing-Hsin)
Title: Applying TRIZ and Fuzzy AHP to develop innovative design for automated manufacturing systems
(Retracted article. See vol. 42, pg. 5402, 2015)
Volume: 36
Issue: 4
47
Pages: 8302-8312
DOI: 10.1016/j.eswa.2008.10.025
Published: MAY 2009
ISSN: 0957-4174
eISSN: 1873-6793
Record 25 of 50
By: Tuzkaya, G (Tuzkaya, Guelfem); Gulsun, B (Gulsun, Bahadir); Kahraman, C (Kahraman, Cengiz);
Ozgen, D (Ozgen, Dogan)
Author Identifiers:
Author
Tuzkaya, Gulfem
ResearcherID Number
ORCID Number
0000-0001-7683-4405
Title: An integrated fuzzy multi-criteria decision making methodology for material handling equipment
selection problem and an application
Volume: 37
Issue: 4
Pages: 2853-2863
DOI: 10.1016/j.eswa.2009.09.004
Published: APR 2010
ISSN: 0957-4174
Record 26 of 50
By: Punniyamoorthy, M (Punniyamoorthy, M.); Mathiyalagan, P (Mathiyalagan, P.); Parthiban, P
(Parthiban, P.)
Title: A strategic model using structural equation modeling and fuzzy logic in supplier selection
Volume: 38
Issue: 1
Pages: 458-474
DOI: 10.1016/j.eswa.2010.06.086
Published: JAN 2011
48
ISSN: 0957-4174
Record 27 of 50
By: Tsai, WH (Tsai, Wen-Hsien); Chou, WC (Chou, Wen-Chin); Lai, CW (Lai, Chien-Wen)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
lyp, maggie G-1471-2011
Title: An effective evaluation model and improvement analysis for national park websites: A case study of
Taiwan
Source: TOURISM MANAGEMENT
Volume: 31
Issue: 6
Pages: 936-952
DOI: 10.1016/j.tourman.2010.01.016
Published: DEC 2010
ISSN: 0261-5177
Record 28 of 50
By: Chin, KS (Chin, Kwai-Sang); Tang, DW (Tang, Da-Wei); Yang, JB (Yang, Jian-Bo); Wong, SY
(Wong, Shui Yee); Wang, HW (Wang, Hongwei)
Author Identifiers:
Author
ResearcherID Number
wang, hongwei G-3843-2013
ORCID Number
0000-0002-6206-7353
Title: Assessing new product development project risk by Bayesian network with a systematic probability
generation methodology
Volume: 36
Issue: 6
Pages: 9879-9890
DOI: 10.1016/j.eswa.2009.02.019
Published: AUG 2009
ISSN: 0957-4174
49
Record 29 of 50
By: Yazgan, HR (Yazgan, Harun Resit); Boran, S (Boran, Semra); Goztepe, K (Goztepe, Kerim)
Author Identifiers:
Author
ResearcherID Number
yazgan, harun
B-2579-2013
yazgan, harun resit
ORCID Number
0000-0002-8791-0458
Title: An ERP software selection process with using artificial neural network based on analytic network
process approach
Volume: 36
Issue: 5
Pages: 9214-9222
DOI: 10.1016/j.eswa.2008.12.022
Published: JUL 2009
ISSN: 0957-4174
Record 30 of 50
By: Wong, BK (Wong, Bo K.); Lai, VS (Lai, Vincent S.)
Title: A survey of the application of fuzzy set theory in production and operations management: 19982009
Source: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS
Volume: 129
Issue: 1
Pages: 157-168
DOI: 10.1016/j.ijpe.2010.09.013
Published: JAN 2011
ISSN: 0925-5273
Record 31 of 50
By: Azadegan, A (Azadegan, Arash); Porobic, L (Porobic, Lejla); Ghazinoory, S (Ghazinoory, Sepehr);
Samouei, P (Samouei, Parvaneh); Kheirkhah, AS (Kheirkhah, Amir Saman)
Title: Fuzzy logic in manufacturing: A review of literature and a specialized application
Volume: 132
Issue: 2
50
Pages: 258-270
DOI: 10.1016/j.ijpe.2011.04.018
Published: AUG 2011
ISSN: 0925-5273
Record 32 of 50
By: Turrin, M (Turrin, Michela); von Buelow, P (von Buelow, Peter); Stouffs, R (Stouffs, Rudi)
Author Identifiers:
Author
ResearcherID Number
Stouffs, Rudi C-8243-2012
ORCID Number
0000-0002-4200-5833
Title: Design explorations of performance driven geometry in architectural design using parametric
modeling and genetic algorithms
Source: ADVANCED ENGINEERING INFORMATICS
Volume: 25
Issue: 4
Pages: 656-675
DOI: 10.1016/j.aei.2011.07.009
Published: OCT 2011
ISSN: 1474-0346
Record 33 of 50
By: Geng, XL (Geng, Xiuli); Chu, XN (Chu, Xuening); Xue, DY (Xue, Deyi); Zhang, ZF (Zhang,
Zaifang)
Author Identifiers:
Author
Xue, Deyi
ResearcherID Number
ORCID Number
0000-0001-5285-8867
Title: An integrated approach for rating engineering characteristics' final importance in product-service
system development
Volume: 59
Issue: 4
Pages: 585-594
DOI: 10.1016/j.cie.2010.07.002
Published: NOV 2010
51
ISSN: 0360-8352
Record 34 of 50
By: Aragones-Beltran, P (Aragones-Beltran, P.); Chaparro-Gonzalez, F (Chaparro-Gonzalez, F.); PastorFerrando, JP (Pastor-Ferrando, J. P.); Rodriguez-Pozo, F (Rodriguez-Pozo, F.)
Author Identifiers:
Author
ResearcherID Number
L-8764-2013
Pastor-Ferrando, Juan-Pascual M-6983-2013
ORCID Number
0000-0003-0538-9409
0000-0001-7125-9464
Title: An ANP-based approach for the selection of photovoltaic solar power plant investment projects
Source: RENEWABLE & SUSTAINABLE ENERGY REVIEWS
Volume: 14
Issue: 1
Pages: 249-264
DOI: 10.1016/j.rser.2009.07.012
Published: JAN 2010
ISSN: 1364-0321
Record 35 of 50
By: Bhattacharya, A (Bhattacharya, Arijit); Abraham, A (Abraham, Ajith); Vasant, P (Vasant, Pandian);
Grosan, C (Grosan, Crina)
Author Identifiers:
Author
Abraham, Ajith
Vasant, Pandian
Grosan, Crina
Vasant, Pandian
Bhattacharya, Arijit
ResearcherID Number
A-1416-2008
A-3484-2009
B-8435-2011
E-6501-2013
C-7029-2009
ORCID Number
0000-0002-0169-6738
0000-0001-5698-297X
Title: Evolutionary artificial neural network for selecting flexible manufacturing systems under disparate
level-of-satisfaction of decision maker
Source: INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND
CONTROL
Volume: 3
Issue: 1
Pages: 131-140
Published: FEB 2007
Conference Title: 3rd International Symposium on Management Engineering (ISME 2006)
52
Conference Date: MAR 10-12, 2006
Conference Location: Waseda Univ, Tokyo, JAPAN
Conference Host: Waseda Univ
ISSN: 1349-4198
eISSN: 1349-418X
Record 36 of 50
By: Liu, HT (Liu, Hao-Tien); Tsai, YI (Tsai, Yieh-Iin)
Title: A fuzzy risk assessment approach for occupational hazards in the construction industry
Volume: 50
Issue: 4
Special Issue: SI
Pages: 1067-1078
DOI: 10.1016/j.ssci.2011.11.021
Published: APR 2012
ISSN: 0925-7535
Record 37 of 50
By: Ju, YB (Ju, Yanbing); Wang, AH (Wang, Aihua); Liu, XY (Liu, Xiaoyue)
Title: Evaluating emergency response capacity by fuzzy AHP and 2-tuple fuzzy linguistic approach
Volume: 39
Issue: 8
Pages: 6972-6981
DOI: 10.1016/j.eswa.2012.01.061
Published: JUN 15 2012
ISSN: 0957-4174
Record 38 of 50
53
By: Geng, XL (Geng, Xiuli); Chu, XN (Chu, Xuening); Zhang, ZF (Zhang, Zaifang)
Title: A new integrated design concept evaluation approach based on vague sets
Volume: 37
Issue: 9
Pages: 6629-6638
DOI: 10.1016/j.eswa.2010.03.058
Published: SEP 2010
ISSN: 0957-4174
Record 39 of 50
By: Hambali, A (Hambali, A.); Sapuan, SM (Sapuan, S. M.); Ismail, N (Ismail, N.); Nukman, Y (Nukman,
Y.)
Author Identifiers:
Author
ResearcherID Number
Yusoff, Nukman
B-5302-2010
Sapuan, Mohd Sapuan A-3506-2009
ORCID Number
0000-0002-7389-2164
0000-0003-0627-7951
Title: Application of analytical hierarchy process in the design concept selection of automotive composite
bumper beam during the conceptual design stage
Source: SCIENTIFIC RESEARCH AND ESSAYS
Volume: 4
Issue: 4
Pages: 198-211
Published: APR 2009
ISSN: 1992-2248
Record 40 of 50
By: Michalos, G (Michalos, George); Makris, S (Makris, Sotiris); Mourtzis, D (Mourtzis, Dimitris)
Title: An intelligent search algorithm-based method to derive assembly line design alternatives
Source: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
Volume: 25
Issue: 3
Pages: 211-229
DOI: 10.1080/0951192X.2011.627949
Published: 2012
54
ISSN: 0951-192X
Record 41 of 50
By: Zheng, GZ (Zheng, Guozhong); Jing, YY (Jing, Youyin); Huang, HX (Huang, Hongxia); Zhang, XT
(Zhang, Xutao); Gao, YF (Gao, Yuefen)
Title: Application of Life Cycle Assessment (LCA) and extenics theory for building energy conservation
assessment
Source: ENERGY
Volume: 34
Issue: 11
Pages: 1870-1879
DOI: 10.1016/j.energy.2009.07.035
Published: NOV 2009
ISSN: 0360-5442
Record 42 of 50
By: Sharma, S (Sharma, Sanjay); Agrawal, N (Agrawal, Narayan)
Title: Selection of a pull production control policy under different demand situations for a manufacturing
system by AHP-algorithm
Source: COMPUTERS & OPERATIONS RESEARCH
Volume: 36
Issue: 5
Pages: 1622-1632
DOI: 10.1016/j.cor.2008.03.006
Published: MAY 2009
ISSN: 0305-0548
Record 43 of 50
By: Akay, D (Akay, Diyar); Kulak, O (Kulak, Osman); Henson, B (Henson, Brian)
Author Identifiers:
55
Author
ResearcherID Number
ORCID Number
AKAY, Diyar C-1516-2008
Title: Conceptual design evaluation using interval type-2 fuzzy information axiom
Source: COMPUTERS IN INDUSTRY
Volume: 62
Issue: 2
Special Issue: SI
Pages: 138-146
DOI: 10.1016/j.compind.2010.10.007
Published: FEB 2011
ISSN: 0166-3615
Record 44 of 50
By: Azadeh, A (Azadeh, A.); Anvari, M (Anvari, M.); Ziaei, B (Ziaei, B.); Sadeghi, K (Sadeghi, K.)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Azadeh, Ali C-5517-2015
Title: An integrated fuzzy DEA-fuzzy C-means-simulation for optimization of operator allocation in
cellular manufacturing systems
Volume: 46
Issue: 1-4
Pages: 361-375
DOI: 10.1007/s00170-009-2088-6
Published: JAN 2010
ISSN: 0268-3768
Record 45 of 50
By: Lee, H (Lee, Hakyeon); Seol, H (Seol, Hyeonju); Sung, N (Sung, Nakhwan); Hong, YS (Hong, Yoo
S.); Park, Y (Park, Yongtae)
Title: An analytic network process approach to measuring design change impacts in modular products
Source: JOURNAL OF ENGINEERING DESIGN
Volume: 21
Issue: 1
Pages: 75-91
56
Article Number: PII 795267362
DOI: 10.1080/09544820802232517
Published: 2010
ISSN: 0954-4828
Record 46 of 50
By: Aghdaie, MH (Aghdaie, Mohammad Hasan); Hashemkhani Zolfani, S (Hashemkhani Zolfani,
Sarfaraz); Zavadskas, EK (Zavadskas, Edmundas Kazimieras)
Title: Decision Making in Machine Tool Selection: An Integrated Approach with SWARA and COPRASG Methods
Source: INZINERINE EKONOMIKA-ENGINEERING ECONOMICS
Volume: 24
Issue: 1
Pages: 5-17
DOI: 10.5755/j01.ee.24.1.2822
Published: 2013
ISSN: 1392-2785
eISSN: 2029-5839
Record 47 of 50
By: Duran, O (Duran, Orlando)
Author Identifiers:
Author
Duran, Orlando
ResearcherID Number
ORCID Number
0000-0001-8734-6052
Title: Computer-aided maintenance management systems selection based on a fuzzy AHP approach
Source: ADVANCES IN ENGINEERING SOFTWARE
Volume: 42
Issue: 10
Pages: 821-829
DOI: 10.1016/j.advengsoft.2011.05.023
Published: OCT 2011
57
ISSN: 0965-9978
Record 48 of 50
By: Lin, LZ (Lin, Ling-Zhong); Hsu, TH (Hsu, Tsuen-Ho)
Title: Designing a model of FANP in brand image decision-making
Volume: 11
Issue: 1
Pages: 561-573
DOI: 10.1016/j.asoc.2009.12.015
Published: JAN 2011
ISSN: 1568-4946
Record 49 of 50
By: Anojkumar, L (Anojkumar, L.); Ilangkumaran, M (Ilangkumaran, M.); Sasirekha, V (Sasirekha, V.)
Title: Comparative analysis of MCDM methods for pipe material selection in sugar industry
Volume: 41
Issue: 6
Pages: 2964-2980
DOI: 10.1016/j.eswa.2013.10.028
Published: MAY 2014
ISSN: 0957-4174
eISSN: 1873-6793
Record 50 of 50
By: Kang, HY (Kang, He-Yau); Lee, AHI (Lee, Amy H. I.); Yang, CY (Yang, C. -Y.)
Title: A fuzzy ANP model for supplier selection as applied to IC packaging
Volume: 23
Issue: 5
Pages: 1477-1488
DOI: 10.1007/s10845-010-0448-6
Published: OCT 2012
58
ISSN: 0956-5515
Web of Science™
[2]
Record 1 of 50
By: Rezaeiniya, N (Rezaeiniya, Nahid); Hashemkhani Zolfani, S (Hashemkhani Zolfani, Sarfaraz);
Zavadskas, EK (Zavadskas, Edmundas Kazimieras)
Title: GREENHOUSE LOCATING BASED ON ANP-COPRAS-G METHODS - AN EMPIRICAL
STUDY BASED ON IRAN
Source: INTERNATIONAL JOURNAL OF STRATEGIC PROPERTY MANAGEMENT
Volume: 16
Issue: 2
Pages: 188-200
DOI: 10.3846/1648715X.2012.686459
Published: 2012
ISSN: 1648-715X
eISSN: 1648-9179
Record 2 of 50
By: Taha, Z (Taha, Zahari); Rostam, S (Rostam, Sarkawt)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
taha, zahari F-6356-2015
Title: A hybrid fuzzy AHP-PROMETHEE decision support system for machine tool selection in flexible
manufacturing cell
Volume: 23
Issue: 6
Special Issue: SI
Pages: 2137-2149
DOI: 10.1007/s10845-011-0560-2
Published: DEC 2012
59
ISSN: 0956-5515
Record 3 of 50
By: Giner-Santonja, G (Giner-Santonja, German); Aragones-Beltran, P (Aragones-Beltran, Pablo); NiclosFerragut, J (Niclos-Ferragut, Joaquin)
Author Identifiers:
Author
ResearcherID Number
Aragones-Beltran, Pablo L-8764-2013
ORCID Number
0000-0003-0538-9409
Title: The application of the analytic network process to the assessment of best available techniques
Source: JOURNAL OF CLEANER PRODUCTION
Volume: 25
Pages: 86-95
DOI: 10.1016/j.jclepro.2011.12.012
Published: APR 2012
ISSN: 0959-6526
Record 4 of 50
By: Yilmaz, B (Yilmaz, Burcu); Dagdeviren, M (Dagdeviren, Metin)
Author Identifiers:
Author
ResearcherID Number
DAGDEVIREN, METIN
ORCID Number
0000-0003-2121-5978
Title: A combined approach for equipment selection: F-PROMETHEE method and zero-one goal
programming
Volume: 38
Issue: 9
Pages: 11641-11650
DOI: 10.1016/j.eswa.2011.03.043
Published: SEP 2011
ISSN: 0957-4174
60
Record 5 of 50
By: Lee, H (Lee, Hakyeon); Kim, C (Kim, Chulhyun); Park, Y (Park, Yongtae)
Title: Evaluation and management of new service concepts: An ANP-based portfolio approach
Volume: 58
Issue: 4
Pages: 535-543
DOI: 10.1016/j.cie.2009.11.016
Published: MAY 2010
ISSN: 0360-8352
Record 6 of 50
By: Yung, KL (Yung, K. L.); Ko, SM (Ko, S. M.); Kwan, FY (Kwan, F. Y.); Tam, HK (Tam, H. K.);
Lam, CW (Lam, C. W.); Ng, HP (Ng, H. P.); Lau, KS (Lau, K. S.)
Title: Application of function deployment model in decision making for new product development
Source: CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS
Volume: 14
Issue: 3
Pages: 257-267
DOI: 10.1177/1063293X06068392
Published: SEP 2006
ISSN: 1063-293X
Record 7 of 50
By: Liu, G (Liu, Gang)
Author Identifiers:
Author
ResearcherID Number
Liu, Gang
F-8485-2012
Rodriguez, Osvaldo M-4989-2015
ORCID Number
0000-0003-4315-4520
Title: Development of a general sustainability indicator for renewable energy systems: A review
Source: RENEWABLE & SUSTAINABLE ENERGY REVIEWS
Volume: 31
Pages: 611-621
DOI: 10.1016/j.rser.2013.12.038
61
Published: MAR 2014
ISSN: 1364-0321
Record 8 of 50
By: Samvedi, A (Samvedi, Avinash); Jain, V (Jain, Vipul); Chan, FTS (Chan, Felix T. S.)
Title: An integrated approach for machine tool selection using fuzzy analytical hierarchy process and grey
relational analysis
Volume: 50
Issue: 12
Pages: 3211-3221
DOI: 10.1080/00207543.2011.560906
Published: 2012
ISSN: 0020-7543
Record 9 of 50
By: Mardani, A (Mardani, Abbas); Jusoh, A (Jusoh, Ahmad); Zavadskas, EK (Zavadskas, Edmundas
Kazimieras)
Title: Fuzzy multiple criteria decision-making techniques and applications - Two decades review from
1994 to 2014
Volume: 42
Issue: 8
Pages: 4126-4148
DOI: 10.1016/j.eswa.2015.01.003
ISSN: 0957-4174
eISSN: 1873-6793
Record 10 of 50
62
By: Jung, H (Jung, Hosang)
Title: A fuzzy AHP-GP approach for integrated production-planning considering manufacturing partners
Volume: 38
Issue: 5
Pages: 5833-5840
DOI: 10.1016/j.eswa.2010.11.039
Published: MAY 2011
ISSN: 0957-4174
Record 11 of 50
By: Nguyen, HT (Huu-Tho Nguyen); Dawal, SZM (Dawal, Siti Zawiah Md); Nukman, Y (Nukman,
Yusoff); Aoyama, H (Aoyama, Hideki)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Aoyama, Hideki D-7842-2014
Title: A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with
consideration of the interactions of attributes
Volume: 41
Issue: 6
Pages: 3078-3090
DOI: 10.1016/j.eswa.2013.10.039
Published: MAY 2014
ISSN: 0957-4174
eISSN: 1873-6793
Record 12 of 50
By: Lee, C (Lee, Changyong); Lee, H (Lee, Hakyeon); Seol, H (Seol, Hyeonju); Park, Y (Park, Yongtae)
Author Identifiers:
Author
曹, 黎侠
ResearcherID Number
ORCID Number
F-8177-2014
Title: Evaluation of new service concepts using rough set theory and group analytic hierarchy process
Volume: 39
63
Issue: 3
Pages: 3404-3412
DOI: 10.1016/j.eswa.2011.09.028
ISSN: 0957-4174
Record 13 of 50
By: Taha, Z (Taha, Zahari); Rostam, S (Rostam, Sarkawt)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
taha, zahari F-6356-2015
Title: A fuzzy AHP-ANN-based decision support system for machine tool selection in a flexible
manufacturing cell
Volume: 57
Issue: 5-8
Pages: 719-733
DOI: 10.1007/s00170-011-3323-5
Published: NOV 2011
ISSN: 0268-3768
Record 14 of 50
By: Fang, F (Fang, Fang); Zeng, RJ (Zeng, Raymond J.); Sheng, GP (Sheng, Guo-Ping); Yu, HQ (Yu,
Han-Qing)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Zeng, Raymond A-1095-2010
Yu, Han-Qing
F-7925-2010
Sheng, Guo-Ping F-2074-2010
Title: An integrated approach to identify the influential priority of the factors governing anaerobic H-2
production by mixed cultures
Source: WATER RESEARCH
Volume: 44
Issue: 10
Pages: 3234-3242
64
DOI: 10.1016/j.watres.2010.03.001
Published: MAY 2010
ISSN: 0043-1354
PubMed ID: 20347115
Record 15 of 50
By: Shelton, J (Shelton, Jeffrey); Medina, M (Medina, Michael)
Title: Integrated Multiple-Criteria Decision-Making Method to Prioritize Transportation Projects
Source: TRANSPORTATION RESEARCH RECORD
Issue: 2174
Pages: 51-57
DOI: 10.3141/2174-08
Published: 2010
ISSN: 0361-1981
Record 16 of 50
By: Parameshwaran, R (Parameshwaran, R.); Srinivasan, PSS (Srinivasan, P. S. S.); Punniyamoorthy, M
(Punniyamoorthy, M.); Charunyanath, ST (Charunyanath, S. T.); Ashwin, C (Ashwin, C.)
Title: Integrating fuzzy analytical hierarchy process and data envelopment analysis for performance
management in automobile repair shops
Source: EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING
Volume: 3
Issue: 4
Pages: 450-467
Published: 2009
ISSN: 1751-5254
Record 17 of 50
By: Isalou, AA (Isalou, A. A.); Zamani, V (Zamani, V.); Shahmoradi, B (Shahmoradi, B.); Alizadeh, H
(Alizadeh, H.)
Author Identifiers:
65
Author
ResearcherID Number
Shahmoradi, Behzad G-5625-2015
ORCID Number
0000-0002-2120-4518
Title: Landfill site selection using integrated fuzzy logic and analytic network process (F-ANP)
Source: ENVIRONMENTAL EARTH SCIENCES
Volume: 68
Issue: 6
Pages: 1745-1755
DOI: 10.1007/s12665-012-1865-y
Published: MAR 2013
ISSN: 1866-6280
Record 18 of 50
By: Lee, AHI (Lee, Amy H. I.); Kang, HY (Kang, He-Yau); Chang, CC (Chang, Chao-Cheng)
Title: AN INTEGRATED INTERPRETIVE STRUCTURAL MODELING-FUZZY ANALYTIC
NETWORK PROCESS-BENEFITS, OPPORTUNITIES, COSTS AND RISKS MODEL FOR
SELECTING TECHNOLOGIES
Source: INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING
Volume: 10
Issue: 5
Pages: 843-871
DOI: 10.1142/S0219622011004592
Published: SEP 2011
ISSN: 0219-6220
Record 19 of 50
By: Ozgen, A (Ozgen, Arzum); Tuzkaya, G (Tuzkaya, Gulfem); Tuzkaya, UR (Tuzkaya, Umut R.);
Ozgen, D (Ozgen, Dogan)
Author Identifiers:
Author
Tuzkaya, Gulfem
ResearcherID Number
ORCID Number
0000-0001-7683-4405
Title: A Multi-Criteria Decision Making Approach for Machine Tool Selection Problem in a Fuzzy
Environment
Source: INTERNATIONAL JOURNAL OF COMPUTATIONAL INTELLIGENCE SYSTEMS
Volume: 4
Issue: 4
66
Pages: 431-445
Published: JUN-AUG 2011
ISSN: 1875-6883
Record 20 of 50
By: Azadeh, A (Azadeh, Ali); Kor, H (Kor, Hamrah); Hatefi, SM (Hatefi, Seyed-Morteza)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Title: A hybrid genetic algorithm-TOPSIS-computer simulation approach for optimum operator
assignment in cellular manufacturing systems
Source: JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
Volume: 34
Issue: 1
Special Issue: SI
Pages: 57-74
DOI: 10.1080/02533839.2011.552966
Published: JAN 2011
ISSN: 0253-3839
eISSN: 2158-7299
Record 21 of 50
By: Yang, WZ (Yang, W. Z.); Xie, SQ (Xie, S. Q.); Ai, QS (Ai, Q. S.); Zhou, ZD (Zhou, Z. D.)
Title: Recent development on product modelling: a review
Volume: 46
Issue: 21
Pages: 6055-6085
DOI: 10.1080/00207540701343895
Published: 2008
67
ISSN: 0020-7543
Record 22 of 50
By: Tadic, S (Tadic, Snezana); Zecevic, S (Zecevic, Slobodan); Krstic, M (Krstic, Mladen)
Title: A novel hybrid MCDM model based on fuzzy DEMATEL, fuzzy ANP and fuzzy VIKOR for city
logistics concept selection
Volume: 41
Issue: 18
Pages: 8112-8128
DOI: 10.1016/j.eswa.2014.07.021
Published: DEC 15 2014
ISSN: 0957-4174
eISSN: 1873-6793
Record 23 of 50
By: Ozgen, D (Ozgen, Dogan); Gulsun, B (Gulsun, Bahadir)
Title: Combining possibilistic linear programming and fuzzy AHP for solving the multi-objective
capacitated multi-facility location problem
Source: INFORMATION SCIENCES
Volume: 268
Pages: 185-201
DOI: 10.1016/j.ins.2014.01.024
ISSN: 0020-0255
eISSN: 1872-6291
Record 24 of 50
By: Nixon, JD (Nixon, J. D.); Dey, PK (Dey, P. K.); Ghosh, SK (Ghosh, S. K.); Davies, PA (Davies, P.
A.)
Title: Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical
analytical network process
Source: ENERGY
Volume: 59
Pages: 215-223
DOI: 10.1016/j.energy.2013.06.052
68
Published: SEP 15 2013
ISSN: 0360-5442
Record 25 of 50
By: Buyukozkan, G (Buyukozkan, Gulcin); Arsenyan, J (Arsenyan, Jbid); Ruan, D (Ruan, Da)
Title: Logistics tool selection with two-phase fuzzy multi criteria decision making: A case study for
personal digital assistant selection
Volume: 39
Issue: 1
Pages: 142-153
DOI: 10.1016/j.eswa.2011.06.017
Published: JAN 2012
ISSN: 0957-4174
Record 26 of 50
By: Lopez-Ortega, O (Lopez-Ortega, Omar); Rosales, MA (Rosales, Marco-Antonio)
Title: An agent-oriented decision support system combining fuzzy clustering and the AHP
Volume: 38
Issue: 7
Pages: 8275-8284
DOI: 10.1016/j.eswa.2011.01.008
Published: JUL 2011
ISSN: 0957-4174
Record 27 of 50
By: Wang, CH (Wang, Chun-Hsien); Lu, IY (Lu, Iuan-Yuan); Chen, CB (Chen, Chin-Bein)
Title: Integrating hierarchical balanced scorecard with non-additive fuzzy integral for evaluating high
technology firm performance
69
Volume: 128
Issue: 1
Special Issue: SI
Pages: 413-426
DOI: 10.1016/j.ijpe.2010.07.042
Published: NOV 2010
ISSN: 0925-5273
Record 28 of 50
By: Zheng, GZ (Zheng, Guozhong); Jing, YY (Jing, Youyin); Huang, HX (Huang, Hongxia); Shi, GH
(Shi, Guohua); Zhang, XT (Zhang, Xutao)
Title: Developing a fuzzy analytic hierarchical process model for building energy conservation assessment
Source: RENEWABLE ENERGY
Volume: 35
Issue: 1
Pages: 78-87
DOI: 10.1016/j.renene.2009.07.008
Published: JAN 2010
ISSN: 0960-1481
Record 29 of 50
By: Vinodh, S (Vinodh, S.); Varadharajan, AR (Varadharajan, Ashwin R.); Subramanian, A
(Subramanian, Abhishek)
Author Identifiers:
Author
S, Vinodh
ResearcherID Number
ORCID Number
0000-0002-9705-1343
Title: Application of fuzzy VIKOR for concept selection in an agile environment
Volume: 65
Issue: 5-8
Pages: 825-832
DOI: 10.1007/s00170-012-4220-2
Published: MAR 2013
70
ISSN: 0268-3768
Record 30 of 50
By: Soroor, J (Soroor, Javad); Tarokh, MJ (Tarokh, Mohammad J.); Khoshalhan, F (Khoshalhan, Farid);
Sajjadi, S (Sajjadi, Sara)
Title: Intelligent evaluation of supplier bids using a hybrid technique in distributed supply chains
Source: JOURNAL OF MANUFACTURING SYSTEMS
Volume: 31
Issue: 2
Pages: 240-252
DOI: 10.1016/j.jmsy.2011.09.002
Published: APR 2012
ISSN: 0278-6125
Record 31 of 50
By: Lo, YF (Lo, Ying-Fu); Wen, MH (Wen, Ming-Hui)
Title: A fuzzy-AHP-based technique for the decision of design feature selection in Massively Multiplayer
Online Role-Playing Game development
Volume: 37
Issue: 12
Pages: 8685-8693
DOI: 10.1016/j.eswa.2010.06.059
Published: DEC 2010
ISSN: 0957-4174
Record 32 of 50
By: Liu, C (Liu, Chen); Ramirez-Serrano, A (Ramirez-Serrano, Alejandro); Yin, GF (Yin, Guofu)
Title: An optimum design selection approach for product customization development
Volume: 23
Issue: 4
71
Pages: 1433-1443
DOI: 10.1007/s10845-010-0473-5
Published: AUG 2012
ISSN: 0956-5515
Record 33 of 50
By: Yu, J (Yu, Jie); Liu, Y (Liu, Yue); Chang, GL (Chang, Gang-Len); Ma, WJ (Ma, Wanjing); Yang, XG
(Yang, Xiaoguang)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Ma, Wanjing F-5400-2014
Title: Locating Urban Transit Hubs: Multicriteria Model and Case Study in China
Source: JOURNAL OF TRANSPORTATION ENGINEERING-ASCE
Volume: 137
Issue: 12
Pages: 944-952
DOI: 10.1061/(ASCE)TE.1943-5436.0000275
Published: DEC 2011
ISSN: 0733-947X
Record 34 of 50
By: Quintana, G (Quintana, Guillem); Ciurana, J (Ciurana, Joaquim)
Title: Cost estimation support tool for vertical high speed machines based on product characteristics and
productivity requirements
Volume: 134
Issue: 1
Pages: 188-195
DOI: 10.1016/j.ijpe.2011.06.013
Published: NOV 2011
72
ISSN: 0925-5273
Record 35 of 50
By: Caballero-Luque, A (Caballero-Luque, Antonio); Aragones-Beltran, P (Aragones-Beltran, Pablo);
Garcia-Melon, M (Garcia-Melon, Monica); Dema-Perez, C (Dema-Perez, Carlos)
Author Identifiers:
Author
ResearcherID Number
Aragones-Beltran, Pablo L-8764-2013
Garcia Melon, Monica
L-5200-2014
ORCID Number
0000-0003-0538-9409
0000-0001-8101-4049
Title: ANALYSIS OF THE ALIGNMENT OF COMPANY GOALS TO WEB CONTENT USING ANP
Source: INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING
Volume: 9
Issue: 3
Pages: 419-436
DOI: 10.1142/S0219622010003889
Published: MAY 2010
ISSN: 0219-6220
Record 36 of 50
By: Erginel, N (Erginel, Nihal)
Title: Construction of a fuzzy QFD failure matrix using a fuzzy multiple-objective decision model
Volume: 21
Issue: 6
Pages: 677-692
DOI: 10.1080/09544820902810261
Published: 2010
ISSN: 0954-4828
Record 37 of 50
By: Kilic, HS (Kilic, Huseyin Selcuk); Zaim, S (Zaim, Selim); Delen, D (Delen, Dursun)
Title: Selecting "The Best" ERP system for SMEs using a combination of ANP and PROMETHEE
methods
73
Volume: 42
Issue: 5
Pages: 2343-2352
DOI: 10.1016/j.eswa.2014.10.034
Published: APR 1 2015
ISSN: 0957-4174
eISSN: 1873-6793
Record 38 of 50
By: Zhou, JL (Zhou, Jian-Lan); Bai, ZH (Bai, Ze-Hua); Sun, ZY (Sun, Zhi-Yu)
Title: A hybrid approach for safety assessment in high-risk hydropower-construction-project work
systems
Volume: 64
Pages: 163-172
DOI: 10.1016/j.ssci.2013.12.008
Published: APR 2014
ISSN: 0925-7535
eISSN: 1879-1042
Record 39 of 50
By: Karahalios, H (Karahalios, Hristos)
Title: The contribution of risk management in ship management: The case of ship collision
Volume: 63
Pages: 104-114
DOI: 10.1016/j.ssci.2013.11.004
Published: MAR 2014
ISSN: 0925-7535
eISSN: 1879-1042
74
Record 40 of 50
By: Meng, C (Meng, Chao); Xu, D (Xu, Dong); Son, YJ (Son, Young-Jun); Kubota, C (Kubota, Chieri);
Lewis, M (Lewis, Myles); Tronstad, R (Tronstad, Russell)
Title: An integrated simulation and AHP approach to vegetable grafting operation design
Source: COMPUTERS AND ELECTRONICS IN AGRICULTURE
Volume: 102
Pages: 73-84
DOI: 10.1016/j.compag.2014.01.007
Published: MAR 2014
ISSN: 0168-1699
eISSN: 1872-7107
Record 41 of 50
By: Stanujkic, D (Stanujkic, Dragisa); Magdalinovic, N (Magdalinovic, Nedeljko); Milanovic, D
(Milanovic, Dragan); Magdalinovic, S (Magdalinovic, Srdjana); Popovic, G (Popovic, Gabrijela)
Title: An Efficient and Simple Multiple Criteria Model for a Grinding Circuit Selection Based on
MOORA Method
Source: INFORMATICA
Volume: 25
Issue: 1
Pages: 73-93
Published: 2014
ISSN: 0868-4952
eISSN: 1822-8844
Record 42 of 50
By: Lupo, T (Lupo, Toni)
Author Identifiers:
Author
ResearcherID Number
Lupo, Toni N-5797-2015
ORCID Number
0000-0003-3807-9263
Title: Handling stakeholder uncertain judgments in strategic transport service analyses
Source: TRANSPORT POLICY
Volume: 29
Special Issue: SI
Pages: 54-63
75
DOI: 10.1016/j.tranpol.2013.04.002
Published: SEP 2013
ISSN: 0967-070X
Record 43 of 50
By: Shidpour, H (Shidpour, H.); Shahrokhi, M (Shahrokhi, M.); Bernard, A (Bernard, A.)
Title: A multi-objective programming approach, integrated into the TOPSIS method, in order to optimize
product design; in three-dimensional concurrent engineering
Volume: 64
Issue: 4
Pages: 875-885
DOI: 10.1016/j.cie.2012.12.016
Published: APR 2013
ISSN: 0360-8352
Record 44 of 50
By: Moalagh, M (Moalagh, Morteza); Ravasan, AZ (Ravasan, Ahad Zare)
Title: Developing a practical framework for assessing ERP post-implementation success using fuzzy
analytic network process
Volume: 51
Issue: 4
Pages: 1236-1257
DOI: 10.1080/00207543.2012.698318
ISSN: 0020-7543
Record 45 of 50
By: Chou, CH (Chou, Chen-Hui); Liang, GS (Liang, Gin-Shuh); Chang, HC (Chang, Hung-Chung)
76
Title: A fuzzy AHP approach based on the concept of possibility extent
Source: QUALITY & QUANTITY
Volume: 47
Issue: 1
Pages: 1-14
DOI: 10.1007/s11135-011-9473-6
Published: JAN 2013
ISSN: 0033-5177
Record 46 of 50
By: Augustine, M (Augustine, Manu); Yadav, OP (Yadav, Om Prakash); Jain, R (Jain, Rakesh); Rathore,
APS (Rathore, Ajay Pal Singh)
Title: Concept convergence process: A framework for improving product concepts
Volume: 59
Issue: 3
Pages: 367-377
DOI: 10.1016/j.cie.2010.05.009
Published: OCT 2010
ISSN: 0360-8352
Record 47 of 50
By: Lee, AHI (Lee, Amy H. I.); Lin, CY (Lin, Chun-Yu); Wang, SR (Wang, Shu-Ru); Tu, YM (Tu, YingMei)
Title: The construction of a comprehensive model for production strategy evaluation
Source: FUZZY OPTIMIZATION AND DECISION MAKING
Volume: 9
Issue: 2
Pages: 187-217
DOI: 10.1007/s10700-010-9077-y
Published: JUN 2010
77
ISSN: 1568-4539
Record 48 of 50
By: Pastor-Ferrando, JP (Pastor-Ferrando, J. P.); Aragones-Beltran, P (Aragones-Beltran, P.); HospitalerPerez, A (Hospitaler-Perez, A.); Garcia-Melon, M (Garcia-Melon, M.)
Author Identifiers:
Author
Pastor-Ferrando, Juan-Pascual
Garcia Melon, Monica
Hospitaler, Antonio
ResearcherID Number
L-8764-2013
M-6983-2013
L-5200-2014
H-8956-2015
ORCID Number
0000-0003-0538-9409
0000-0001-7125-9464
0000-0001-8101-4049
0000-0001-7108-3104
Title: An ANP- and AHP-based approach for weighting criteria in public works bidding
Volume: 61
Issue: 6
Pages: 905-916
DOI: 10.1057/jors.2010.13
Published: JUN 2010
ISSN: 0160-5682
Record 49 of 50
By: Yeh, TM (Yeh, Tsu-Ming); Pai, FY (Pai, Fan-Yun); Liao, CW (Liao, Cheng-Wei)
Title: Using a hybrid MCDM methodology to identify critical factors in new product development
Source: NEURAL COMPUTING & APPLICATIONS
Volume: 24
Issue: 3-4
Pages: 957-971
DOI: 10.1007/s00521-012-1314-6
Published: MAR 2014
ISSN: 0941-0643
eISSN: 1433-3058
Record 50 of 50
By: Zhou, GY (Zhou, Guo-Yan); Wu, E (Wu, En); Tu, ST (Tu, Shan-Tung)
Title: Optimum selection of compact heat exchangers using non-structural fuzzy decision method
78
Source: APPLIED ENERGY
Volume: 113
Special Issue: SI
Pages: 1801-1809
DOI: 10.1016/j.apenergy.2013.07.041
Published: JAN 2014
ISSN: 0306-2619
eISSN: 1872-9118
Web of Science™
[3]
Record 1 of 50
By: Altun, K (Altun, Koray); Dereli, T (Dereli, Turkay); Baykasoglu, A (Baykasoglu, Adil)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Baykasoglu, Adil B-9749-2012
Title: Development of a framework for customer co-creation in NPD through multi-issue negotiation with
issue trade-offs
Volume: 40
Issue: 3
Special Issue: SI
Pages: 873-880
DOI: 10.1016/j.eswa.2012.05.043
ISSN: 0957-4174
Record 2 of 50
By: Ic, YT (Ic, Yusuf Tansel); Yurdakul, M (Yurdakul, Mustafa); Eraslan, E (Eraslan, Ergun)
Title: Development of a component-based machining centre selection model using AHP
Volume: 50
79
Issue: 22
Pages: 6489-6498
DOI: 10.1080/00207543.2011.653011
Published: 2012
ISSN: 0020-7543
Record 3 of 50
By: Demirel, T (Demirel, Tufan); Musdal, H (Musdal, Hande); Demirel, NC (Demirel, Nihan Cetin);
Yucenur, GN (Yucenur, G. Nilay)
Title: Multi-Criteria Evaluation of Land Cover Policies Using Fuzzy AHP and Fuzzy ANP: The Case of
Turkey
Source: HUMAN AND ECOLOGICAL RISK ASSESSMENT
Volume: 15
Issue: 4
Pages: 746-764
DOI: 10.1080/10807030903051168
Published: 2009
Conference Title: 1st International Conference on Risk Analysis and Crisis Response
Conference Date: SEP 25-26, 2007
Conference Location: Shanghai Maritime Univ, Shanghai, PEOPLES R CHINA
Sponsor(s): China Assoc Disaster Prevent, Risk Anal Council; Natl Disaster Reduct Ctr; Minist Civil
Affairs China; Soc Risk Anal; Soc Risk Anal Europe; Soc Risk Anal Japan
Conference Host: Shanghai Maritime Univ
ISSN: 1080-7039
Record 4 of 50
By: Akay, D (Akay, Diyar); Kulak, O (Kulak, Osman)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Title: Evaluation of product design concepts using grey-fuzzy information axiom
Source: JOURNAL OF GREY SYSTEM
Volume: 19
Issue: 3
Pages: 221-234
Published: 2007
80
ISSN: 0957-3720
Record 5 of 50
By: Ung, ST (Ung, S. T.); Williams, V (Williams, V.); Chen, HS (Chen, H. S.); Bonsall, S (Bonsall, S.);
Wang, J (Wang, J.)
Title: Human error assessment and management in port operations using fuzzy AHP
Source: MARINE TECHNOLOGY SOCIETY JOURNAL
Volume: 40
Issue: 1
Pages: 73-86
Published: SPR 2006
ISSN: 0025-3324
Record 6 of 50
By: Kahraman, C (Kahraman, Cengiz); Onar, SC (Onar, Sezi Cevik); Oztaysi, B (Oztaysi, Basar)
Title: Fuzzy Multicriteria Decision-Making: A Literature Review
Volume: 8
Issue: 4
Pages: 637-666
DOI: 10.1080/18756891.2015.1046325
Published: JUL 4 2015
ISSN: 1875-6891
eISSN: 1875-6883
Record 7 of 50
By: Chen, YC (Chen, Yen-Cheng); Yu, TH (Yu, Tung-Han); Tsui, PL (Tsui, Pei-Ling); Lee, CS (Lee,
Ching-Sung)
Title: A fuzzy AHP approach to construct international hotel spa atmosphere evaluation model
81
Volume: 48
Issue: 2
Pages: 645-657
DOI: 10.1007/s11135-012-9792-2
Published: MAR 2014
ISSN: 0033-5177
eISSN: 1573-7845
Record 8 of 50
By: Zhang, WQ (Zhang, Weiqian); Wang, WQ (Wang, Weiqiang); Wang, SB (Wang, Shoubing)
Title: Environmental performance evaluation of implementing EMS (ISO 14001) in the coating industry:
case study of a Shanghai coating firm
Volume: 64
Pages: 205-217
DOI: 10.1016/j.jclepro.2013.08.028
ISSN: 0959-6526
eISSN: 1879-1786
Record 9 of 50
By: Lennon, E (Lennon, Elizabeth); Farr, J (Farr, John); Sesser, R (Sesser, Ronald)
Title: Evaluation of multi-attribute decision making systems applied during the concept design of new
microplasma devices
Volume: 40
Issue: 16
Pages: 6321-6329
DOI: 10.1016/j.eswa.2013.05.049
Published: NOV 15 2013
ISSN: 0957-4174
82
Record 10 of 50
By: Tavana, M (Tavana, Madjid); Zandi, F (Zandi, Faramak); Katehakis, MN (Katehakis, Michael N.)
Title: A hybrid fuzzy group ANP-TOPSIS framework for assessment of e-government readiness from a
CiRM perspective
Source: INFORMATION & MANAGEMENT
Volume: 50
Issue: 7
Pages: 383-397
DOI: 10.1016/j.im.2013.05.008
Published: NOV 2013
ISSN: 0378-7206
eISSN: 1872-7530
Record 11 of 50
By: Wang, CH (Wang, Chih-Hsuan); Shih, CW (Shih, Chih-Wen)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Wang, Chih E-8235-2015
Title: Integrating conjoint analysis with quality function deployment to carry out customer-driven concept
development for ultrabooks
Source: COMPUTER STANDARDS & INTERFACES
Volume: 36
Issue: 1
Special Issue: SI
Pages: 89-96
DOI: 10.1016/j.csi.2013.07.010
Published: NOV 2013
ISSN: 0920-5489
eISSN: 1872-7018
Record 12 of 50
By: Wang, CH (Wang, Chih-Hsuan); Hsueh, OZ (Hsueh, One-Zen)
Author Identifiers:
83
Author
ResearcherID Number
ORCID Number
Title: A novel approach to incorporate customer preference and perception into product configuration: A
case study on smart pads
Source: COMPUTER STANDARDS & INTERFACES
Volume: 35
Issue: 5
Pages: 549-556
DOI: 10.1016/j.csi.2013.01.002
Published: SEP 2013
ISSN: 0920-5489
Record 13 of 50
By: Song, WY (Song, Wenyan); Ming, XG (Ming, Xingguo); Wu, ZY (Wu, Zhenyong)
Title: An integrated rough number-based approach to design concept evaluation under subjective
environments
Volume: 24
Issue: 5
Pages: 320-341
DOI: 10.1080/09544828.2012.732994
ISSN: 0954-4828
Record 14 of 50
By: Ataei, M (Ataei, Mohammad); Mikaeil, R (Mikaeil, Reza); Hoseinie, SH (Hoseinie, Seyed Hadi);
Hosseini, SM (Hosseini, Seyed Mehdi)
Author Identifiers:
Author
mikaeil, reza
ResearcherID Number
ORCID Number
0000-0001-8404-3216
Title: Fuzzy analytical hierarchy process approach for ranking the sawability of carbonate rock
Source: INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
Volume: 50
Pages: 83-93
DOI: 10.1016/j.ijrmms.2011.12.002
84
Published: FEB 2012
ISSN: 1365-1609
Record 15 of 50
By: Chen, LC (Chen, Li-Chieh); Chu, PY (Chu, Po-Ying)
Title: Developing the index for product design communication and evaluation from emotional
perspectives
Volume: 39
Issue: 2
Pages: 2011-2020
DOI: 10.1016/j.eswa.2011.08.039
ISSN: 0957-4174
Record 16 of 50
By: Larrode, E (Larrode, Emilio); Moreno-Jimenez, JM (Maria Moreno-Jimenez, Jose); Muerza, MV
(Muerza, M. Victoria)
Author Identifiers:
Author
ResearcherID Number
Moreno Jimenez, Jose Maria D-9166-2014
Muerza, Victoria
ORCID Number
0000-0002-5037-6976
0000-0002-2405-4375
Title: An AHP-multicriteria suitability evaluation of technological diversification in the automotive
industry
Volume: 50
Issue: 17
Special Issue: SI
Pages: 4889-4907
DOI: 10.1080/00207543.2012.657975
Published: 2012
85
ISSN: 0020-7543
eISSN: 1366-588X
Record 17 of 50
By: Liu, C (Liu, Chen); Ramirez-Serrano, A (Ramirez-Serrano, Alejandro); Yin, GF (Yin, Guofu)
Title: Customer-driven product design and evaluation method for collaborative design environments
Volume: 22
Issue: 5
Special Issue: SI
Pages: 751-764
DOI: 10.1007/s10845-009-0334-2
Published: OCT 2011
ISSN: 0956-5515
Record 18 of 50
By: Ozgen, A (Ozgen, Arzum); Tanyas, M (Tanyas, Mehmet)
Title: Joint selection of customs broker agencies and international road transportation firms by a fuzzy
analytic network process approach
Volume: 38
Issue: 7
Pages: 8251-8258
DOI: 10.1016/j.eswa.2011.01.005
Published: JUL 2011
ISSN: 0957-4174
Record 19 of 50
By: Chan, SL (Chan, S. L.); Ip, WH (Ip, W. H.)
Author Identifiers:
Author
IP, W.H.
ResearcherID Number
J-2941-2013
ORCID Number
0000-0001-6609-0713
Title: A Scorecard-Markov model for new product screening decisions
Source: INDUSTRIAL MANAGEMENT & DATA SYSTEMS
86
Volume: 110
Issue: 7
Pages: 971-992
DOI: 10.1108/02635571011069068
Published: 2010
ISSN: 0263-5577
eISSN: 1758-5783
Record 20 of 50
By: Onut, S (Onut, Semih); Efendigil, T (Efendigil, Tugba)
Title: A theorical model design for ERP software selection process under the constraints of cost and
quality: A fuzzy approach
Source: JOURNAL OF INTELLIGENT & FUZZY SYSTEMS
Volume: 21
Issue: 6
Pages: 365-378
DOI: 10.3233/IFS-2010-0457
Published: 2010
ISSN: 1064-1246
Record 21 of 50
By: Vinodh, S (Vinodh, S.); Gautham, SG (Gautham, S. G.); Ramiya, RA (Ramiya, R. Anesh);
Rajanayagam, D (Rajanayagam, D.)
Author Identifiers:
Author
S, Vinodh
ResearcherID Number
ORCID Number
0000-0002-9705-1343
Title: Application of fuzzy analytic network process for agile concept selection in a manufacturing
organisation
Volume: 48
Issue: 24
Pages: 7243-7264
DOI: 10.1080/00207540903434963
Published: 2010
87
ISSN: 0020-7543
Record 22 of 50
By: Beikkhakhian, Y (Beikkhakhian, Yokabed); Javanmardi, M (Javanmardi, Mohammad); Karbasian, M
(Karbasian, Mahdi); Khayambashi, B (Khayambashi, Bijan)
Title: The application of ISM model in evaluating agile suppliers selection criteria and ranking suppliers
using fuzzy TOPSIS-AHP methods
Volume: 42
Issue: 15-16
Pages: 6224-6236
DOI: 10.1016/j.eswa.2015.02.035
Published: SEP 2015
ISSN: 0957-4174
eISSN: 1873-6793
Record 23 of 50
By: Tsai, WH (Tsai, Wen-Hsien); Lee, PL (Lee, Pei-Ling); Shen, YS (Shen, Yu-Shan); Hwang, ETY
(Hwang, Elliott T. Y.)
Title: A combined evaluation model for encouraging entrepreneurship policies
Source: ANNALS OF OPERATIONS RESEARCH
Volume: 221
Issue: 1
Pages: 449-468
DOI: 10.1007/s10479-011-1029-6
Published: OCT 2014
ISSN: 0254-5330
eISSN: 1572-9338
Record 24 of 50
By: Jo, H (Jo, Hyunjei); Noh, SD (Noh, Sang Do); Cho, Y (Cho, Yongju)
88
Title: An Agile Operations Management System for Green Factory
Source: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURINGGREEN TECHNOLOGY
Volume: 1
Issue: 2
Pages: 131-143
DOI: 10.1007/s40684-014-0018-z
Published: APR 2014
ISSN: 2288-6206
eISSN: 2198-0810
Record 25 of 50
By: Pei, Z (Pei, Zhi)
Title: Simplification of fuzzy multiple attribute decision making in production line evaluation
Source: KNOWLEDGE-BASED SYSTEMS
Volume: 47
Pages: 23-34
DOI: 10.1016/j.knosys.2013.03.010
Published: JUL 2013
ISSN: 0950-7051
Record 26 of 50
By: Huang, HZ (Huang, Hong-Zhong); Liu, Y (Liu, Yu); Li, YF (Li, Yanfeng); Xue, LH (Xue, Lihua);
Wang, ZL (Wang, Zhonglai)
Title: New evaluation methods for conceptual design selection using computational intelligence
techniques
Source: JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
Volume: 27
Issue: 3
Pages: 733-746
DOI: 10.1007/s12206-013-0123-x
Published: MAR 2013
89
ISSN: 1738-494X
Record 27 of 50
By: Vandaele, NJ (Vandaele, Nico J.); Decouttere, CJ (Decouttere, Catherine J.)
Title: Sustainable R&D portfolio assessment
Source: DECISION SUPPORT SYSTEMS
Volume: 54
Issue: 4
Special Issue: SI
Pages: 1521-1532
DOI: 10.1016/j.dss.2012.05.054
Published: MAR 2013
ISSN: 0167-9236
Record 28 of 50
By: Chang, AY (Chang, An-Yuan); Hu, KJ (Hu, Kuo-Jen); Hong, YL (Hong, Yun-Lin)
Author Identifiers:
Author
Hu, Kuo-Jen
ResearcherID Number
ORCID Number
0000-0002-9740-1702
Title: An ISM-ANP approach to identifying key agile factors in launching a new product into mass
production
Volume: 51
Issue: 2
Pages: 582-597
DOI: 10.1080/00207543.2012.657804
Published: 2013
ISSN: 0020-7543
Record 29 of 50
By: Mexas, MP (Mexas, Mirian Picinini); Quelhas, OLG (Goncalves Quelhas, Osvaldo Luiz); Costa, HG
(Costa, Helder Gomes)
Author Identifiers:
90
Author
ResearcherID Number
Costa, Helder C-5754-2008
ORCID Number
0000-0001-9945-0367
Title: Prioritization of enterprise resource planning systems criteria: Focusing on construction industry
Volume: 139
Issue: 1
Pages: 340-350
DOI: 10.1016/j.ijpe.2012.05.025
Published: SEP 2012
ISSN: 0925-5273
Record 30 of 50
By: Yu, J (Yu, Jie); Liu, Y (Liu, Yue)
Title: Prioritizing highway safety improvement projects: A multi-criteria model and case study with
SafetyAnalyst
Volume: 50
Issue: 4
Special Issue: SI
Pages: 1085-1092
DOI: 10.1016/j.ssci.2011.11.018
Published: APR 2012
ISSN: 0925-7535
Record 31 of 50
By: Hashemkhani Zolfani, S (Hashemkhani Zolfani, Sarfaraz); Rezaeiniya, N (Rezaeiniya, Nahid);
Saparauskas, J (Saparauskas, Jonas)
Title: SELECTING THE BEST MULTI-ROLE ARTIST OF ROCK BANDS OF IRAN IN 2000s BY
APPLYING ANP AND TOPSIS GREY
Source: ECONOMIC COMPUTATION AND ECONOMIC CYBERNETICS STUDIES AND
RESEARCH
Volume: 46
Issue: 2
Pages: 193-211
Published: 2012
91
ISSN: 0424-267X
eISSN: 1842-3264
Record 32 of 50
By: Jung, H (Jung, Hosang)
Title: An available-to-promise process considering production and transportation uncertainties and
multiple performance measures
Volume: 50
Issue: 7
Pages: 1780-1798
DOI: 10.1080/00207543.2011.561373
Published: 2012
ISSN: 0020-7543
Record 33 of 50
By: Schniederjans, MJ (Schniederjans, Marc J.); Cao, Q (Cao, Qing); Gu, VC (Gu, Vicky Ching)
Title: An operations management perspective on adopting customer-relations management (CRM)
software
Volume: 50
Issue: 14
Pages: 3974-3987
DOI: 10.1080/00207543.2011.613865
Published: 2012
ISSN: 0020-7543
Record 34 of 50
By: Liu, JG (Liu, Jingang); Yang, F (Yang, Feng); Wan, H (Wan, Hong); Fowler, JW (Fowler, John W.)
Author Identifiers:
92
Author
ResearcherID Number
Fowler, John E-9426-2011
ORCID Number
0000-0002-7112-8031
Title: Capacity planning through queueing analysis and simulation-based statistical methods: a case study
for semiconductor wafer fabs
Volume: 49
Issue: 15
Pages: 4573-4591
DOI: 10.1080/00207543.2010.501828
Published: 2011
ISSN: 0020-7543
Record 35 of 50
By: Zhu, GN (Zhu, Guo-Niu); Hu, J (Hu, Jie); Qi, J (Qi, Jin); Gu, CC (Gu, Chao-Chen); Peng, YH (Peng,
Ying-Hong)
Title: An integrated AHP and VIKOR for design concept evaluation based on rough number
Source: ADVANCED ENGINEERING INFORMATICS
Volume: 29
Issue: 3
Pages: 408-418
DOI: 10.1016/j.aei.2015.01.010
Published: AUG 2015
ISSN: 1474-0346
eISSN: 1873-5320
Record 36 of 50
By: Lin, CH (Lin, Chinho); Madu, CN (Madu, Christian N.); Kuei, CH (Kuei, Chu-hua); Tsai, HL (Tsai,
Hua-Ling); Wang, KN (Wang, Kuai-ni)
Title: Developing an assessment framework for managing sustainability programs: A Analytic Network
Process approach
Volume: 42
Issue: 5
Pages: 2488-2501
DOI: 10.1016/j.eswa.2014.09.025
93
ISSN: 0957-4174
eISSN: 1873-6793
Record 37 of 50
By: Chang, B (Chang, Betty); Kuo, C (Kuo, Chin); Wu, CH (Wu, Chih-Hung); Tzeng, GH (Tzeng, GwoHshiung)
Title: Using Fuzzy Analytic Network Process to assess the risks in enterprise resource planning system
implementation
Volume: 28
Pages: 196-207
DOI: 10.1016/j.asoc.2014.11.025
Published: MAR 2015
ISSN: 1568-4946
eISSN: 1872-9681
Record 38 of 50
By: Parameshwaran, R (Parameshwaran, R.); Baskar, C (Baskar, C.); Karthik, T (Karthik, T.)
Title: An integrated framework for mechatronics based product development in a fuzzy environment
Volume: 27
Pages: 376-390
DOI: 10.1016/j.asoc.2014.11.013
Published: FEB 2015
ISSN: 1568-4946
eISSN: 1872-9681
Record 39 of 50
By: Mardani, A (Mardani, Abbas); Jusoh, A (Jusoh, Ahmad); Nor, KMD (Nor, Khalil M. D.); Khalifah, Z
(Khalifah, Zainab); Zakwan, N (Zakwan, Norhayati); Valipour, A (Valipour, Alireza)
94
Title: Multiple criteria decision-making techniques and their applications - a review of the literature from
2000 to 2014
Source: ECONOMIC RESEARCH-EKONOMSKA ISTRAZIVANJA
Volume: 28
Issue: 1
Pages: 516-571
DOI: 10.1080/1331677X.2015.1075139
Published: 2015
ISSN: 1331-677X
eISSN: 1848-9664
Record 40 of 50
By: Do, TTH (Thi-Thu-Huyen Do); Schnitzer, H (Schnitzer, Hans); Le, TH (Thanh-Hai Le)
Title: A decision support framework considering sustainability for the selection of thermal food processes
Volume: 78
Pages: 112-120
DOI: 10.1016/j.jclepro.2014.04.044
ISSN: 0959-6526
eISSN: 1879-1786
Record 41 of 50
By: Jakovljevic, Z (Jakovljevic, Zivana); Petrovic, PB (Petrovic, Petar B.); Mikovic, VD (Mikovic,
Vladimir Dj.); Pajic, M (Pajic, Miroslav)
Title: Fuzzy inference mechanism for recognition of contact states in intelligent robotic assembly
Volume: 25
Issue: 3
Pages: 571-587
DOI: 10.1007/s10845-012-0706-x
Published: JUN 2014
95
ISSN: 0956-5515
eISSN: 1572-8145
Record 42 of 50
By: Moghimi, R (Moghimi, Rohollah); Anvari, A (Anvari, Alireza)
Title: An integrated fuzzy MCDM approach and analysis to evaluate the financial performance of Iranian
cement companies
Volume: 71
Issue: 1-4
Pages: 685-698
DOI: 10.1007/s00170-013-5370-6
Published: MAR 2014
ISSN: 0268-3768
eISSN: 1433-3015
Record 43 of 50
By: Soltani, Ali; Marandi, Ebrahim Zargari; Ivaki, Yousef Esmaili
Title: Bus route evaluation using a two-stage hybrid model of Fuzzy AHP and TOPSIS
Title: Avaliação de linhas de ônibus com uso de um modelo híbrido de dois estágios com Fuzzy AHP e
TOPSIS
Source: Journal of Transport Literature
Volume: 7
Issue: 3
Pages: 34-58
DOI: 10.1590/S2238-10312013000300003
Published: 2013-07
ISSN: 2238-1031
Accession Number: SCIELO:S2238-10312013000300003
Record 44 of 50
By: Kang, YY (Kang, Yuyun); Tang, DB (Tang, Dunbing)
Author Identifiers:
Author
kang, yuyun
ResearcherID Number
ORCID Number
0000-0002-0114-5928
96
Title: Matrix-based computational conceptual design with ant colony optimisation
Volume: 24
Issue: 6
Pages: 429-452
DOI: 10.1080/09544828.2012.756461
ISSN: 0954-4828
Record 45 of 50
By: Noorizadeh, A (Noorizadeh, Abdollah); Mahdiloo, M (Mahdiloo, Mahdi); Saen, RF (Saen, Reza
Farzipoor)
Title: Using DEA cross-efficiency evaluation for suppliers ranking in the presence of non-discretionary
inputs
Source: INTERNATIONAL JOURNAL OF SHIPPING AND TRANSPORT LOGISTICS
Volume: 5
Issue: 1
Pages: 95-111
DOI: 10.1504/IJSTL.2013.050595
Published: 2013
ISSN: 1756-6517
Record 46 of 50
By: Percin, S (Percin, Selcuk); Min, H (Min, Hokey)
Title: Optimal machine tools selection using quality function deployment and fuzzy multiple objective
decision making approach
Volume: 24
Issue: 1
Pages: 163-174
DOI: 10.3233/IFS-2012-0542
Published: 2013
97
ISSN: 1064-1246
Record 47 of 50
By: Velmurugan, R (Velmurugan, Ramaiyan); Selvamuthukumar, S (Selvamuthukumar, Subramanian)
Author Identifiers:
Author
ResearcherID Number
Selvamuthukumar, Subramanian D-8360-2014
ORCID Number
0000-0003-1382-954X
Title: The analytic network process for the pharmaceutical sector: Multi criteria decision making to select
the suitable method for the preparation of nanoparticles
Source: DARU-JOURNAL OF PHARMACEUTICAL SCIENCES
Volume: 20
Article Number: 59
DOI: 10.1186/2008-2231-20-59
Published: OCT 18 2012
ISSN: 1560-8115
PubMed ID: 23352327
Record 48 of 50
By: Bosch-Mauchand, M (Bosch-Mauchand, Magali); Siadat, A (Siadat, Ali); Perry, N (Perry, Nicolas);
Bernard, A (Bernard, Alain)
Author Identifiers:
Author
Nicolas, PERRY
ResearcherID Number
ORCID Number
0000-0003-3215-4867
Title: VCS: value chains simulator, a tool for value analysis of manufacturing enterprise processes (a
value-based decision support tool)
Volume: 23
Issue: 4
Pages: 1389-1402
DOI: 10.1007/s10845-010-0452-x
Published: AUG 2012
ISSN: 0956-5515
98
Record 49 of 50
By: Sun, CC (Sun Chia-Chi)
Title: A hybrid performance evaluation system for notebook computer ODM companies
Source: AFRICAN JOURNAL OF BUSINESS MANAGEMENT
Volume: 5
Issue: 3
Pages: 987-1000
ISSN: 1993-8233
Record 50 of 50
By: Choi, YM (Choi, Young Mi)
Title: Managing Input During Assistive Technology Product Design
Source: ASSISTIVE TECHNOLOGY
Volume: 23
Issue: 2
Pages: 65-75
DOI: 10.1080/10400435.2011.567372
Published: 2011
ISSN: 1040-0435
Web of Science™
[4]
Record 1 of 50
By: Kang, HY (Kang, He-Yau)
Title: A multi-criteria decision-making approach for capacity allocation problem in semiconductor
fabrication
Volume: 49
Issue: 19
Pages: 5893-5916
DOI: 10.1080/00207543.2010.526151
Published: 2011
99
ISSN: 0020-7543
Record 2 of 50
By: Lin, CW (Lin, Ching-Wen); Wang, CH (Wang, Chih-Hung)
Title: A selection model for auditing software
Volume: 111
Issue: 5-6
Pages: 776-790
DOI: 10.1108/02635571111137304
Published: 2011
ISSN: 0263-5577
Record 3 of 50
By: Yilmaz, B (Yilmaz, Burcu); Dagdeviren, M (Dagdeviren, Metin)
Title: COMPARATIVE ANALYSIS OF PROMETHEE AND FUZZY PROMETHEE METHODS IN
EQUIPMENT SELECTION PROBLEM
Source: JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI
UNIVERSITY
Volume: 25
Issue: 4
Pages: 811-826
Published: DEC 2010
ISSN: 1300-1884
Record 4 of 50
By: Johansson, B (Johansson, Bjoern); Sudzina, F (Sudzina, Frantisek)
Edited by: Boldyreff, C (Boldyreff, C); Crowston, K (Crowston, K); Lundell, B (Lundell, B); Wasserman,
AI (Wasserman, AI)
Title: Choosing Open Source ERP Systems: What Reasons Are There For Doing So?
Source: OPEN SOURCE ECOSYSTEMS-DIVERSE COMMUNITIES INTERACTING
Book Series Title: International Federation for Information Processing
100
Volume: 299
Pages: 143-155
Published: 2009
Conference Title: 5th International Conference on Open Source Systems
Conference Date: JUN 03-06, 2009
Conference Location: Skovde, SWEDEN
Sponsor(s): IFIP WG 2 13
ISSN: 1571-5736
ISBN: 978-3-642-02031-5
Record 5 of 50
By: Li, JY (Li Jin-ying); Dong, XC (Dong Xue-chen)
Edited by: Muhin, VE (Muhin, VE); Ye, Z (Ye, Z)
Title: Research on Training Quality Evaluation of Enterprise Employees
Source: IEEC 2009: FIRST INTERNATIONAL SYMPOSIUM ON INFORMATION ENGINEERING
AND ELECTRONIC COMMERCE, PROCEEDINGS
Pages: 471-475
DOI: 10.1109/IEEC.2009.105
Published: 2009
Conference Title: 1st International Symposium on Information Engineering and Electronic Commerce
Conference Date: MAY 16-17, 2009
Conference Location: Ternopil, UKRAINE
Sponsor(s): Natl Tech Univ Ukraine; Huazhong Univ Sci & Technol; Huazhong Normal Univ; Wuhan
Univ; Ternopil Natl Econ Univ; IEEE Ukraine Sect, I&M CI Joint Chapter
ISBN: 978-0-7695-3686-6
Record 6 of 50
By: Mikaeil, R (Mikaeil, Reza); Naghadehi, MZ (Naghadehi, Masoud Zare); Ataei, M (Ataei,
Mohammad); Khalokakaie, R (Khalokakaie, Reza)
Title: A DECISION SUPPORT SYSTEM USING FUZZY ANALYTICAL HIERARCHY PROCESS
(FAHP) AND TOPSIS APPROACHES FOR SELECTION OF THE OPTIMUM UNDERGROUND
MINING METHOD
Source: ARCHIVES OF MINING SCIENCES
Volume: 54
Issue: 2
Pages: 349-368
Published: 2009
101
ISSN: 0860-7001
Record 7 of 50
By: Chen, CC (Chen, C. -C.); Yeh, TM (Yeh, T. -M.); Yang, CC (Yang, C. -C.)
Title: Performance measurement for new product development: a model based on total costs
Volume: 44
Issue: 21
Pages: 4631-4648
DOI: 10.1080/00207540500517756
Published: NOV 1 2006
ISSN: 0020-7543
Record 8 of 50
By: Yayla, AY (Yayla, Adile Yesim); Oztekin, A (Oztekin, Asil); Gumus, AT (Gumus, Alev Taskin);
Gunasekaran, A (Gunasekaran, Angappa)
Title: A hybrid data analytic methodology for 3PL transportation provider evaluation using fuzzy multicriteria decision making
Volume: 53
Issue: 20
Pages: 6097-6113
DOI: 10.1080/00207543.2015.1022266
Published: OCT 18 2015
ISSN: 0020-7543
eISSN: 1366-588X
Record 9 of 50
By: Pamucar, D (Pamucar, Dragan); Cirovic, G (Cirovic, Goran)
Title: The selection of transport and handling resources in logistics centers using Multi-Attributive Border
Approximation area Comparison (MABAC)
Volume: 42
102
Issue: 6
Pages: 3016-3028
DOI: 10.1016/j.eswa.2014.11.057
ISSN: 0957-4174
eISSN: 1873-6793
Record 10 of 50
By: Dindarloo, SR (Dindarloo, S. R.); Osanloo, M (Osanloo, M.); Frimpong, S (Frimpong, S.)
Author Identifiers:
Author
ResearcherID Number
Dindarloo, Saeid G-1316-2015
ORCID Number
0000-0002-2455-6981
Title: A stochastic simulation framework for truck and shovel selection and sizing in open pit mines
Source: JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY
Volume: 115
Issue: 3
Pages: 209-219
Published: MAR 2015
ISSN: 2225-6253
Record 11 of 50
By: Renzi, C (Renzi, C.); Leali, F (Leali, F.); Pellicciari, M (Pellicciari, M.); Andrisano, AO (Andrisano,
A. O.); Berselli, G (Berselli, G.)
Author Identifiers:
Author
ResearcherID Number
Renzi, Cristina
Pellicciari, Marcello
Leali, Francesco
N-4371-2015
ORCID Number
0000-0002-1629-0036
0000-0003-2578-4123
0000-0001-6621-5379
Title: Selecting alternatives in the conceptual design phase: an application of Fuzzy-AHP and Pugh's
Controlled Convergence
Source: INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING IJIDEM
Volume: 9
Issue: 1
Pages: 1-17
103
DOI: 10.1007/s12008-013-0187-y
Published: FEB 2015
ISSN: 1955-2513
eISSN: 1955-2505
Record 12 of 50
By: Battaia, O (Battaia, Olga); Dolgui, A (Dolgui, Alexandre); Guschinsky, N (Guschinsky, Nikolai);
Levin, G (Levin, Genrikh)
Title: Integrated configurable equipment selection and line balancing for mass production with serialparallel machining systems
Source: ENGINEERING OPTIMIZATION
Volume: 46
Issue: 10
Pages: 1369-1388
DOI: 10.1080/0305215X.2013.841904
Published: OCT 2014
ISSN: 0305-215X
eISSN: 1029-0273
Record 13 of 50
By: Battaia, O (Battaia, Olga); Dolgui, A (Dolgui, Alexandre); Guschinsky, N (Guschinsky, Nikolai);
Levin, G (Levin, Genrikh)
Title: Combinatorial techniques to optimally customize an automated production line with rotary transfer
and turrets
Source: IIE TRANSACTIONS
Volume: 46
Issue: 9
Pages: 867-879
DOI: 10.1080/0740817X.2013.849837
Published: SEP 2014
ISSN: 0740-817X
eISSN: 1545-8830
104
Record 14 of 50
By: Kim, ST (Kim, S. T.); Hong, SR (Hong, S. R.); Kim, CO (Kim, C. O.)
Title: PRODUCT ATTRIBUTE DESIGN USING AN AGENT-BASED SIMULATION OF AN
ARTIFICIAL MARKET
Source: INTERNATIONAL JOURNAL OF SIMULATION MODELLING
Volume: 13
Issue: 3
Pages: 288-299
DOI: 10.2507/IJSIMM13(3)3.266
Published: SEP 2014
ISSN: 1726-4529
eISSN: 1996-8566
Record 15 of 50
By: Li, YP (Li, Yupeng); Chu, XN (Chu, Xuening); Chu, DX (Chu, Dexin); Geng, XL (Geng, Xiuli); Wu,
XS (Wu, Xiaosong)
Title: An integrated approach to evaluate module partition schemes of complex products and systems
based on interval-valued intuitionistic fuzzy sets
Volume: 27
Issue: 7
Pages: 675-689
DOI: 10.1080/0951192X.2013.834471
ISSN: 0951-192X
eISSN: 1362-3052
Record 16 of 50
By: Lee, CKH (Lee, C. K. H.); Choy, KL (Choy, K. L.); Chan, YN (Chan, Y. N.)
Title: A knowledge-based ingredient formulation system for chemical product development in the
personal care industry
Source: COMPUTERS & CHEMICAL ENGINEERING
Volume: 65
Pages: 40-53
DOI: 10.1016/j.compchemeng.2014.03.004
105
ISSN: 0098-1354
eISSN: 1873-4375
Record 17 of 50
By: Zhou, ZY (Zhou, Zhengyin); Wang, XL (Wang, Xiaoling); Sun, RR (Sun, Ruirui); Ao, XF (Ao,
Xuefei); Sun, XP (Sun, Xiaopei); Song, MR (Song, Mingrui)
Title: Study of the comprehensive risk analysis of dam-break flooding based on the numerical simulation
of flood routing. Part II: Model application and results
Source: NATURAL HAZARDS
Volume: 72
Issue: 2
Pages: 675-700
DOI: 10.1007/s11069-013-1029-8
Published: JUN 2014
ISSN: 0921-030X
eISSN: 1573-0840
Record 18 of 50
By: Dang, JF (Dang, Jr-Fong); Hong, IH (Hong, I-Hsuan); Lin, JM (Lin, Jing-Ming)
Title: The Cournot production game with multiple firms under an ambiguous decision environment
Source: INFORMATION SCIENCES
Volume: 266
Pages: 186-198
DOI: 10.1016/j.ins.2013.12.033
ISSN: 0020-0255
eISSN: 1872-6291
Record 19 of 50
106
By: Eres, MH (Eres, Murat Hakki); Bertoni, M (Bertoni, Marco); Kossmann, M (Kossmann, Mario);
Scanlan, J (Scanlan, James)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Eres, Murat Hakki C-6377-2008
Title: Mapping customer needs to engineering characteristics: an aerospace perspective for conceptual
design
Volume: 25
Issue: 1-3
Pages: 64-87
DOI: 10.1080/09544828.2014.903387
Published: 2014
ISSN: 0954-4828
eISSN: 1466-1837
Record 20 of 50
By: Kop, Y (Kop, Yesim); Genevois, ME (Genevois, Mujde Erol); Ulukan, HZ (Ulukan, H. Ziya)
Author Identifiers:
Author
ResearcherID Number
Erol Genevois, Mujde I-9255-2012
ORCID Number
0000-0001-5324-0612
Title: End-of-Life Tyres Recovery Method Selection by Using a Two Step Methodology
Source: JOURNAL OF MULTIPLE-VALUED LOGIC AND SOFT COMPUTING
Volume: 22
Issue: 4-6
Special Issue: SI
Pages: 481-500
Published: 2014
ISSN: 1542-3980
eISSN: 1542-3999
Record 21 of 50
By: Moldovan, L (Moldovan, Liviu)
Edited by: Moldovan, L (Moldovan, L)
Title: QFD employment for a new product design in a mineral water company
107
Source: 7TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING
(INTER-ENG 2013)
Book Series Title: Procedia Technology
Volume: 12
Pages: 462-468
DOI: 10.1016/j.protcy.2013.12.515
Published: 2014
Conference Title: 7th International Conference on Interdisciplinarity in Engineering (INTER-ENG)
Conference Date: OCT 10-11, 2013
Conference Location: Tirgu Mures, ROMANIA
Sponsor(s): Petru Maior Univ Tirgu Mures
ISSN: 2212-0173
ISBN: *****************
Record 22 of 50
By: Seboni, L (Seboni, Lone); Tutesigensi, A (Tutesigensi, Apollo)
Edited by: Kocaoglu, DF (Kocaoglu, DF); Anderson, TR (Anderson, TR); Daim, TU (Daim, TU);
Kozanoglu, DC (Kozanoglu, DC); Niwa, K (Niwa, K); Perman, G (Perman, G)
Title: Development and Verification of a Conceptual Framework for Project Manager-To-Project (PM2P)
Allocations in Multi-Project Environments
Source: 2014 PORTLAND INTERNATIONAL CONFERENCE ON MANAGEMENT OF
ENGINEERING & TECHNOLOGY (PICMET)
Book Series Title: Portland International Conference on Management of Engineering and Technology
Pages: 2477-2496
Published: 2014
Conference Title: Portland International Conference on Management of Engineering & Technology
(PICMET)
Conference Date: JUL 27-31, 2014
Conference Location: Portland Int Ctr Management Engn & Technol, Japan Chapter, Kanazawa, JAPAN
Sponsor(s): Japan Minist Econ Trade & Ind, Ishikawa Prefecture; Hitachi; Toshiba; PFU; East Japan
Railway Co; Komatsu; Daikin; Takenaka; Mitani Sangyo; Eizo; Nakamura Tome Precis Ind; I O Data
Device; Hokusho; Komatsu Wall Ind; Japan Management Assoc Consultants; Matsumoto Machine Co
Ltd; Asahi Elect; Quad Vis Res Inst; Manzairaku Sake Kura Co Ltd; Houju Mem Hosp; RB Controls Co
Ltd; NIKKO Co; Tohshin Grp; Komatsu Electronics; Motorashi Seisakusho; Ishikawa IT Human
Resource Dev Ctr; Hokkoku Bank; Betsukawa; Publ Cent Hosp Matto Ishikawa; Toray Industries; Japan
Adv Inst Sci & Technol
Conference Host: Portland Int Ctr Management Engn & Technol, Japan Chapter
ISSN: 2159-5100
ISBN: 978-1-890843-29-8
108
Record 23 of 50
By: Tsai, TN (Tsai, Tsung-Nan)
Title: Selection of the optimal configuration for a flexible surface mount assembly system based on the
interrelationships among the flexibility elements
Volume: 67
Pages: 146-159
DOI: 10.1016/j.cie.2013.11.005
Published: JAN 2014
ISSN: 0360-8352
eISSN: 1879-0550
Record 24 of 50
By: Ulker, B (Ulker, Birol); Sezen, B (Sezen, Bulent)
Title: A fuzzy based self-check capable computerized MCDM aid tool
Source: KYBERNETES
Volume: 43
Issue: 5
Pages: 797-816
DOI: 10.1108/K-03-2013-0046
Published: 2014
ISSN: 0368-492X
eISSN: 1758-7883
Record 25 of 50
By: Zhang, RJ (Zhang Ruijun); Qiu, JW (Qiu Jiwei); Jia, QX (Jia Qingxuan); Wang, XW (Wang
Xiaowei); Dong, MX (Dong Mingxiao)
Title: An improved fuzzy evaluation method for design schemes based on the information axiom
Volume: 27
Issue: 11
Pages: 1067-1078
DOI: 10.1080/0951192X.2013.874583
Published: 2014
109
ISSN: 0951-192X
eISSN: 1362-3052
Record 26 of 50
By: Eldrandaly, KA (Eldrandaly, Khalid A.)
Author Identifiers:
Author
ResearcherID Number
Eldrandaly, Khalid A-7284-2008
ORCID Number
0000-0003-0802-5563
Title: Exploring multi-criteria decision strategies in GIS with linguistic quantifiers: an extension of the
analytical network process using ordered weighted averaging operators
Source: INTERNATIONAL JOURNAL OF GEOGRAPHICAL INFORMATION SCIENCE
Volume: 27
Issue: 12
Pages: 2455-2482
DOI: 10.1080/13658816.2013.815356
ISSN: 1365-8816
eISSN: 1362-3087
Record 27 of 50
By: Dang, JF (Dang, Jr-Fong); Hong, IH (Hong, I-Hsuan)
Title: The equilibrium quantity and production strategy in a fuzzy random decision environment: Game
approach and case study in glass substrates industries
Volume: 145
Issue: 2
Pages: 724-732
DOI: 10.1016/j.ijpe.2013.06.002
Published: OCT 2013
ISSN: 0925-5273
eISSN: 1873-7579
110
Record 28 of 50
By: Bosch-Mauchand, M (Bosch-Mauchand, Magali); Belkadi, F (Belkadi, Farouk); Bricogne, M
(Bricogne, Matthieu); Eynard, B (Eynard, Benoit)
Author Identifiers:
Author
Bricogne, Matthieu
ResearcherID Number
ORCID Number
0000-0002-1129-3684
Title: Knowledge-based assessment of manufacturing process performance: integration of product
lifecycle management and value-chain simulation approaches
Volume: 26
Issue: 5
Pages: 453-473
DOI: 10.1080/0951192X.2012.731611
ISSN: 0951-192X
Record 29 of 50
By: Deshpande, A (Deshpande, Amit)
Title: An empirical study to evaluate machine tool production readiness and performance
Volume: 64
Issue: 9-12
Pages: 1285-1296
DOI: 10.1007/s00170-012-4086-3
Published: FEB 2013
ISSN: 0268-3768
Record 30 of 50
By: Izadikhah, M (Izadikhah, Mohammad)
Title: Deriving fuzzy weights of criteria from inconsistent fuzzy comparison matrices by using goal
programming method
Volume: 25
Issue: 1
111
Pages: 69-80
DOI: 10.3233/IFS-2012-0615
Published: 2013
ISSN: 1064-1246
Record 31 of 50
By: Razmi, J (Razmi, Jafar); Sangari, MS (Sangari, Mohamad Sadegh)
Title: A comprehensive decision support system for ERP pre-implementation phase
Source: EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING
Volume: 7
Issue: 4
Pages: 475-496
DOI: 10.1504/EJIE.2013.055020
Published: 2013
ISSN: 1751-5254
Record 32 of 50
By: Sakthivel, G (Sakthivel, G.); Nagarajan, G (Nagarajan, G.); Ilangkumaran, M (Ilangkumaran, M.);
Kumar, SS (Kumar, S. Sathish); Suresh, KS (Suresh, K. S.)
Title: A hybrid multi-criteria decision support system for selection of optimum fuel blend
Source: INTERNATIONAL JOURNAL OF EXERGY
Volume: 12
Issue: 4
Pages: 463-490
DOI: 10.1504/IJEX.2013.055076
Published: 2013
ISSN: 1742-8297
Record 33 of 50
112
By: Vahdani, B (Vahdani, Behnam); Hadipour, H (Hadipour, Hasan); Tavakkoli-Moghaddam, R
(Tavakkoli-Moghaddam, Reza)
Author Identifiers:
Author
ResearcherID Number
Tavakkoli-Moghaddam, Reza
ORCID Number
0000-0002-6757-926X
Title: Soft computing based on interval valued fuzzy ANP-A novel methodology
Volume: 23
Issue: 5
Pages: 1529-1544
DOI: 10.1007/s10845-010-0457-5
Published: OCT 2012
ISSN: 0956-5515
Record 34 of 50
By: Mexas, MP (Mexas, Mirian Picinini); Quelhas, OLG (Goncalves Quelhas, Osvaldo Luiz); Costa, HG
(Costa, Helder Gomes)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
0000-0001-9945-0367
Title: Prioritization criteria for enterprise resource planning systems selection for civil construction
companies: a multicriteria approach
Source: CANADIAN JOURNAL OF CIVIL ENGINEERING
Volume: 39
Issue: 8
Pages: 855-866
DOI: 10.1139/L2012-071
Published: AUG 2012
ISSN: 0315-1468
Record 35 of 50
By: Soroor, J (Soroor, Javad); Tarokh, MJ (Tarokh, Mohammad J.); Abedzadeh, M (Abedzadeh, Mostafa)
Title: Automated bid ranking for decentralized coordination of construction logistics
Source: AUTOMATION IN CONSTRUCTION
Volume: 24
113
Pages: 111-119
DOI: 10.1016/j.autcon.2011.11.013
Published: JUL 2012
ISSN: 0926-5805
Record 36 of 50
By: Fatchurrohman, N (Fatchurrohman, N.); Sulaiman, S (Sulaiman, S.); Sapuan, SM (Sapuan, S. M.);
Ariffin, MKA (Ariffin, M. K. A.); Baharuddin, BTHT (Baharuddin, B. T. H. T.)
Author Identifiers:
Author
ResearcherID Number
Sapuan, Mohd Sapuan
ORCID Number
0000-0003-0627-7951
Edited by: Varatharajoo, R (Varatharajoo, R); Abdullah, EJ (Abdullah, EJ); Majid, DL (Majid, DL);
Romli, FI (Romli, FI); Rafie, ASM (Rafie, ASM); Ahmad, KA (Ahmad, KA)
Title: A New Concurrent Engineering - Multi Criteria Decision Making Technique for Conceptual Design
Selection
Source: AEROTECH IV: RECENT ADVANCES IN AEROSPACE TECHNOLOGIES
Book Series Title: Applied Mechanics and Materials
Volume: 225
Pages: 293-298
DOI: 10.4028/www.scientific.net/AMM.225.293
Published: 2012
Conference Title: AEROTECH 4 - Conference on Recent Advances in Aerospace Technologies
Conference Date: NOV 21-22, 2012
Conference Location: Kuala Lumpur, MALAYSIA
Sponsor(s): Univ Putra Malaysia; Univ Kuala Lumpur; Malaysia Convent & Exhibit Bur; Tourism
Malaysia; UNIKL MIAT
ISSN: 1660-9336
ISBN: 978-3-03785-506-5
Record 37 of 50
By: Liu, G (Liu, Gang); Rasul, MG (Rasul, M. G.); Amanullah, MTO (Amanullah, M. T. O.); Khan,
MMK (Khan, M. M. K.)
Author Identifiers:
Author
ResearcherID Number
Liu, Gang F-8485-2012
ORCID Number
0000-0003-4315-4520
114
Edited by: Xu, QJ (Xu, QJ); Ge, HH (Ge, HH); Zhang, JX (Zhang, JX)
Title: Sustainability indicator of renewable energy system based on fuzzy multi-criteria decision making
methods
Source: NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT, PTS 1-3
Book Series Title: Advanced Materials Research
Volume: 361-363
Pages: 1263-1273
DOI: 10.4028/www.scientific.net/AMR.361-363.1263
Published: 2012
Conference Title: International Conference on Energy, Environment and Sustainable Development
(ICEESD 2011)
Conference Location: Shanghai Univ Elect Power, Shanghai, PEOPLES R CHINA
Sponsor(s): Xinjiang Univ; Hebei United Univ
Conference Host: Shanghai Univ Elect Power
ISSN: 1022-6680
ISBN: 978-3-03785-268-2
Record 38 of 50
By: Olson, DL (Olson, David L.); Johansson, B (Johansson, Bjorn); de Carvalho, RA (de Carvalho,
Rogerio Atem)
Edited by: Moller, C (Moller, C); Chaudhry, S (Chaudhry, S)
Title: A Combined Method for Evaluating Criteria When Selecting ERP Systems
Source: RE-CONCEPTUALIZING ENTERPRISE INFORMATION SYSTEMS
Book Series Title: Lecture Notes in Business Information Processing
Volume: 105
Pages: 64-74
Published: 2012
Conference Title: 5th International Conference on Research and Practical Issues of Enterprise
Information systems (CONFENIS 2011)
Conference Location: Aalborg, DENMARK
ISSN: 1865-1348
ISBN: 978-3-642-28826-5
Record 39 of 50
By: Tsai, JP (Tsai, Jo-Peng); Cheng, HY (Cheng, Hsin-Yu); Wu, JH (Wu, Jen-Her); Lee, RS (Lee, RongShean)
115
Edited by: Yan, HS (Yan, HS); Zhang, JB (Zhang, JB); Wang, GL (Wang, GL); Chan, KY (Chan, KY);
Zhang, Y (Zhang, Y); Wang, CJ (Wang, CJ); Zhang, H (Zhang, H)
Title: Development of KM-Based Multi-Criteria Decision-Making Method for Evaluation of 4-axis CNC
Machine Tool
Source: HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN 2012
Volume: 163
Pages: 143-150
DOI: 10.4028/www.scientific.net/AMM.163.143
Published: 2012
Conference Title: 9th International Conference on History of Mechanical Technology and Mechanical
Design (ICHMTMD 2012)
Conference Location: Natl Cheng Kung Univ, Tainan, TAIWAN
Sponsor(s): Beihang Univ; Natl Cheng Kung Univ; Japan Soc Educ Hist Technol
Conference Host: Natl Cheng Kung Univ
ISSN: 1660-9336
ISBN: 978-3-03785-401-3
Record 40 of 50
By: Padma, T (Padma, T.); Balasubramanie, P (Balasubramanie, P.)
Title: A fuzzy analytic hierarchy processing decision support system to analyze occupational menace
forecasting the spawning of shoulder and neck pain
Volume: 38
Issue: 12
Pages: 15303-15309
DOI: 10.1016/j.eswa.2011.06.037
Published: NOV-DEC 2011
ISSN: 0957-4174
Record 41 of 50
By: Zheng, GZ (Zheng, Guozhong); Jing, YY (Jing, Youyin); Huang, HX (Huang, Hongxia); Zhang, XT
(Zhang, Xutao)
Title: Multihierarchical Gray Evaluation Method to Assess Building Energy Conservation
Source: JOURNAL OF ENERGY ENGINEERING-ASCE
Volume: 137
Issue: 2
Pages: 88-98
116
DOI: 10.1061/(ASCE)EY.1943-7897.0000041
Published: JUN 2011
ISSN: 0733-9402
Record 42 of 50
By: Ustundag, A (Ustundag, Alp); Kilinc, MS (Kilinc, Mehmet Serdar)
Title: Fuzzy Multi-Criteria Selection of Science Parks for Start-up Companies
Volume: 4
Issue: 2
Pages: 217-227
Published: APR 2011
ISSN: 1875-6883
Record 43 of 50
By: Bai, Y (Bai, Ying); Wang, DL (Wang, Dali)
Book Group Author(s): IEEE
Title: Evaluate and Identify Optimal Weapon Systems Using Fuzzy Multiple Criteria Decision Making
Source: IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ 2011)
Book Series Title: IEEE International Conference on Fuzzy Systems
Pages: 1510-1515
Published: 2011
Conference Title: IEEE International Conference on Fuzzy Systems (FUZZ 2011)
Conference Location: Taipei, TAIWAN
Sponsor(s): IEEE; IEEE Computat Intelligence Soc; Natl Chiao Tung Univ; Natl Univ Tainan; Natl
Cheng Kung Univ; Osaka Prefecture Univ; Natl Sci Council; Minist Educ; Bur Foreign Trade
ISSN: 1098-7584
ISBN: 978-1-4244-7317-5
Record 44 of 50
117
By: Wang, JS (Wang, Jen-Sheng); Liu, CH (Liu, Che-Hung); Lin, GTR (Lin, Grace T. R.)
Title: How to Manage Information Security in Cloud Computing
Source: 2011 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN, AND CYBERNETICS
(SMC)
Book Series Title: IEEE International Conference on Systems Man and Cybernetics Conference
Proceedings
Pages: 1405-1410
Published: 2011
Conference Title: IEEE International Conference on Systems, Man and Cybernetics (SMC)
Conference Location: Anchorage, AK
Sponsor(s): IEEE; IEEE Syst, Man & Cybernet Soc; IEEE Circuits & Syst Soc (CAS); IEEE Engn, Med
& Biol Soc (EMB)
ISSN: 1062-922X
ISBN: 978-1-4577-0653-0
Record 45 of 50
By: Shi, P (Shi, P.); Liu, F (Liu, F.); Yang, M (Yang, M.)
Title: A MODIFIED ANP AND ITS APPLICATION IN SIMULATION CREDIBILITY EVALUATION
Source: INTERNATIONAL JOURNAL OF SIMULATION MODELLING
Volume: 9
Issue: 4
Pages: 195-207
DOI: 10.2507/IJSIMM09(4)3.161
Published: DEC 2010
ISSN: 1726-4529
Record 46 of 50
By: Fei, J (Fei, Jun); Xu, HA (Xu, Huan)
Edited by: Xu, H (Xu, H)
Title: Assessing Computer Network Security with Fuzzy Analytic Hierarchy Process
Source: 2ND IEEE INTERNATIONAL CONFERENCE ON ADVANCED COMPUTER CONTROL
(ICACC 2010), VOL. 5
Pages: 204-208
DOI: 10.1109/ICACC.2010.5487259
Published: 2010
Conference Title: 2nd IEEE International Conference on Advanced Computer Control
118
Conference Location: Shenyang, PEOPLES R CHINA
Sponsor(s): IEEE
ISBN: 978-1-4244-5847-9
Record 47 of 50
By: Geng, XL (Geng, Xiuli); Chu, XN (Chu, Xuening); Xue, DY (Xue, Deyi); Zhang, ZF (Zhang,
Zaifang)
Book Group Author(s): ASME
Title: PRIORITIZING ENGINEERING CHARACTERISTICS OF PRODUCT-SERVICE SYSTEM
USING ANALYTIC NETWORK PROCESS AND DATA ENVELOPMENT ANALYSIS
Source: PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL
CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE,
DETC 2010, VOL 3, A AND B
Pages: 909-920
Published: 2010
Conference Title: ASME Internationl Design Engineering Technical Conferences / Computers and
Information in Engineering Conference
Conference Date: AUG 15-18, 2010
Conference Location: Montreal, CANADA
Sponsor(s): Amer Soc Mech Engineers, Design Engn Div; Amer Soc Mech Engineers, Comp & Informat
Engn Div
ISBN: 978-0-7918-4411-3
Record 48 of 50
By: Stemberger, MI (Stemberger, Mojca Indihar); Bosilj-Vuksic, V (Bosilj-Vuksic, Vesna); Jaklic, J
(Jaklic, Jurij)
Title: BUSINESS PROCESS MANAGEMENT SOFTWARE SELECTION - TWO CASE STUDIES
Source: EKONOMSKA ISTRAZIVANJA-ECONOMIC RESEARCH
Volume: 22
Issue: 4
Pages: 84-99
Published: 2010
119
ISSN: 1331-677X
Record 49 of 50
By: Fei, J (Fei, Jun); Yu, LH (Yu, Li-hua)
Edited by: Cao, B (Cao, B); Li, TF (Li, TF); Zhang, CY (Zhang, CY)
Title: Applying FAHP to Determine the Weights of Evaluation Indices for Government Websites
Satisfaction
Source: FUZZY INFORMATION AND ENGINEERING, VOLUME 2
Book Series Title: Advances in Intelligent and Soft Computing
Volume: 62
Pages: 1449-1457
Published: 2009
Conference Title: 3rd Internationa Conference on Fuzzy Information and Engineering (ICFIE 2009)
Conference Location: Chongqing Univ Sci & Technol, Chongqing, PEOPLES R CHINA
Sponsor(s): Fuzzy Informat & Engn Branch China Operat Res Soc; Fuzzy Informat & Engn Branch;
Guangzhou Univ; Mazandaran Univ; Natl Nat Sci Fdn China; Fuzzy Optimizat & Dec Making; Fuzzy
Informat & Engn
Conference Host: Chongqing Univ Sci & Technol
ISSN: 1867-5662
ISBN: 978-3-642-03663-7
Record 50 of 50
By: Hernandez, SR (Romero Hernandez, Sergio); Romero-Hernandez, O (Romero-Hernandez, Omar)
Edited by: Tomovic, MM (Tomovic, MM); Wang, S (Wang, S)
Title: Product Design Optimization: An Interdisciplinary Approach
Source: PRODUCT REALIZATION: A COMPREHENSIVE APPROACH
Pages: 169-190
DOI: 10.1007/978-0-387-09482-3_9
Published: 2009
Conference Title: International Conference on Comprehensive Product Realization
Conference Location: Beijing, PEOPLES R CHINA
ISBN: 978-0-387-09481-6
Web of Science™
120
[5]
Record 1 of 50
By: Lu, WF (Lu, W. F.); Sun, J (Sun, J.); Loh, HT (Loh, H. T.); Chua, CW (Chua, C. W.)
Title: Concept Selection for Market Potential Using Fuzzy Selection Approach
Source: IEEM: 2008 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND
ENGINEERING MANAGEMENT, VOLS 1-3
Book Series Title: International Conference on Industrial Engineering and Engineering Management
IEEM
Pages: 1699-1703
Published: 2008
Conference Title: International Conference on Industrial Engineering and Engineering Management
Conference Date: DEC 08-11, 2008
Conference Location: Singapore, SINGAPORE
Sponsor(s): IEEE Engn Management Soc, Singapore Chapter; IEEE Singapore Sect
ISBN: 978-1-4244-2629-4
Record 2 of 50
By: Shuai, JJ (Shuai, J. J.); Kao, CY (Kao, C. Y.)
Title: Building an Effective ERP Selection System for the Technology Industry
Source: IEEM: 2008 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND
ENGINEERING MANAGEMENT, VOLS 1-3
IEEM
Pages: 989-993
Published: 2008
Conference Title: International Conference on Industrial Engineering and Engineering Management
Sponsor(s): IEEE Engn Management Soc, Singapore Chapter; IEEE Singapore Sect
ISBN: 978-1-4244-2629-4
Record 3 of 50
By: Bhattacharya, A (Bhattacharya, Arijit); Abraham, A (Abraham, Ajith); Grosan, C (Grosan, Crina);
Vasant, P (Vasant, Pandian); Han, SY (Han, Sangyong)
Author Identifiers:
121
Author
Abraham, Ajith
Grosan, Crina
Vasant, Pandian
Bhattacharya, Arijit
ResearcherID Number
A-1416-2008
B-8435-2011
E-6501-2013
C-7029-2009
ORCID Number
0000-0002-0169-6738
0000-0001-5698-297X
Edited by: Wang, J (Wang, J); Yi, Z (Yi, Z); Zurada, JM (Zurada, JM); Lu, BL (Lu, BL); Yin, H (Yin, H)
Title: Meta-learning evolutionary artificial neural network for selecting flexible manufacturing systems
Source: ADVANCES IN NEURAL NETWORKS - ISNN 2006, PT 3, PROCEEDINGS
Book Series Title: Lecture Notes in Computer Science
Volume: 3973
Pages: 891-897
Published: 2006
Conference Title: 3rd International Symposium on Neural Networks (ISNN 2006)
Conference Location: Chengdu, PEOPLES R CHINA
Sponsor(s): Univ Elect Sci & Technol China; Chinese Univ Hong Kong; Asia Pacific Neural Network
Assembly; European Neural Network Soc; IEEE Circuits & Syst Soc; IEEE Computat Intelligence Soc;
Int Neural Network Soc; Natl Nat Sci Fdn China; KC Wong Educ Fdn, Hong Kong
ISSN: 0302-9743
ISBN: 3-540-34482-9
Record 4 of 50
By: Buyukozkan, G (Buyukozkan, Gulcin); Guleryuz, S (Guleryuz, Sezin)
Title: Extending Fuzzy QFD Methodology with GDM Approaches: An Application for IT Planning in
Collaborative Product Development
Source: INTERNATIONAL JOURNAL OF FUZZY SYSTEMS
Volume: 17
Issue: 4
Pages: 544-558
DOI: 10.1007/s40815-015-0065-9
Published: DEC 2015
ISSN: 1562-2479
eISSN: 2199-3211
Record 5 of 50
By: ElMaraghy, H (ElMaraghy, Hoda); Kashkoush, M (Kashkoush, Mohamed)
Title: Assembly system synthesis using association rule discovery
122
Volume: 81
Issue: 9-12
Pages: 1705-1722
DOI: 10.1007/s00170-015-7304-y
Published: DEC 2015
ISSN: 0268-3768
eISSN: 1433-3015
Record 6 of 50
By: Budak, A (Budak, Aysenur); Ustundag, A (Ustundag, Alp)
Title: Fuzzy decision making model for selection of real time location systems
Volume: 36
Pages: 177-184
DOI: 10.1016/j.asoc.2015.05.057
Published: NOV 2015
ISSN: 1568-4946
eISSN: 1872-9681
Record 7 of 50
By: Kumru, M (Kumru, Mesut); Kumru, PY (Kumru, Pinar Yildiz)
Title: A fuzzy ANP model for the selection of 3D coordinate-measuring machine
Volume: 26
Issue: 5
Pages: 999-1010
DOI: 10.1007/s10845-014-0882-y
Published: OCT 2015
ISSN: 0956-5515
eISSN: 1572-8145
123
Record 8 of 50
By: Nguyen, HT (Nguyen, Huu-Tho); Dawal, SZM (Dawal, Siti Zawiah Md); Nukman, Y (Nukman,
Yusoff); Aoyama, H (Aoyama, Hideki); Case, K (Case, Keith)
Title: An Integrated Approach of Fuzzy Linguistic Preference Based AHP and Fuzzy COPRAS for
Machine Tool Evaluation
Source: PLOS ONE
Volume: 10
Issue: 9
Article Number: e0133599
DOI: 10.1371/journal.pone.0133599
ISSN: 1932-6203
PubMed ID: 26368541
Record 9 of 50
By: Kucukkoc, I (Kucukkoc, Ibrahim); Zhang, DZ (Zhang, David Z.)
Author Identifiers:
Author
ResearcherID Number
Zhang, David
J-2713-2012
Kucukkoc, Ibrahim C-1207-2011
ORCID Number
0000-0002-1561-0923
0000-0001-6042-6896
Title: A mathematical model and genetic algorithm-based approach for parallel two-sided assembly line
balancing problem
Source: PRODUCTION PLANNING & CONTROL
Volume: 26
Issue: 11
Pages: 874-894
DOI: 10.1080/09537287.2014.994685
Published: AUG 18 2015
ISSN: 0953-7287
eISSN: 1366-5871
Record 10 of 50
By: Duran, O (Duran, Orlando)
Title: SPARE PARTS CRITICALITY ANALYSIS USING A FUZZY AHP APPROACH
124
Source: TEHNICKI VJESNIK-TECHNICAL GAZETTE
Volume: 22
Issue: 4
Pages: 899-905
Published: AUG 2015
ISSN: 1330-3651
eISSN: 1848-6339
Record 11 of 50
By: Karatop, B (Karatop, Buket); Kubat, C (Kubat, Cemalettin); Uygun, O (Uygun, Ozer)
Title: Talent management in manufacturing system using fuzzy logic approach
Volume: 86
Special Issue: SI
Pages: 127-136
DOI: 10.1016/j.cie.2014.09.015
Published: AUG 2015
ISSN: 0360-8352
eISSN: 1879-0550
Record 12 of 50
By: Yan, HB (Yan, Hong-Bin); Ma, TJ (Ma, Tieju)
Title: A fuzzy group decision making approach to new product concept screening at the fuzzy front end
Volume: 53
Issue: 13
Pages: 4021-4049
DOI: 10.1080/00207543.2014.986297
ISSN: 0020-7543
eISSN: 1366-588X
125
Record 13 of 50
By: Arunachalam, APS (Arunachalam, Adhithya Plato Sidharth); Idapalapati, S (Idapalapati, Sridhar);
Subbiah, S (Subbiah, Sathyan)
Title: Multi-criteria decision making techniques for compliant polishing tool selection
Volume: 79
Issue: 1-4
Pages: 519-530
DOI: 10.1007/s00170-015-6822-y
Published: JUL 2015
ISSN: 0268-3768
eISSN: 1433-3015
Record 14 of 50
By: Song, WY (Song, Wenyan); Wu, ZY (Wu, Zhenyong); Li, XZ (Li, Xiuzhen); Xu, ZT (Xu, Zhitao)
Title: Modularizing product extension services: An approach based on modified service blueprint and
fuzzy graph
Volume: 85
Pages: 186-195
DOI: 10.1016/j.cie.2015.03.013
Published: JUL 2015
ISSN: 0360-8352
eISSN: 1879-0550
Record 15 of 50
By: Wang, CH (Wang, Chih-Hsuan)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Title: Using the theory of inventive problem solving to brainstorm innovative ideas for assessing varieties
of phone-cameras
Volume: 85
126
Pages: 227-234
DOI: 10.1016/j.cie.2015.04.003
Published: JUL 2015
ISSN: 0360-8352
eISSN: 1879-0550
Record 16 of 50
By: Fan, BB (Fan, Beibei); Qi, GN (Qi, Guoning); Hu, XM (Hu, Xiaomei); Yu, T (Yu, Tao)
Title: A network methodology for structure-oriented modular product platform planning
Volume: 26
Issue: 3
Pages: 553-570
DOI: 10.1007/s10845-013-0815-1
Published: JUN 2015
ISSN: 0956-5515
eISSN: 1572-8145
Record 17 of 50
By: Toh, CA (Toh, Christine A.); Miller, SR (Miller, Scarlett R.)
Title: How engineering teams select design concepts: A view through the lens of creativity
Source: DESIGN STUDIES
Volume: 38
Pages: 111-138
DOI: 10.1016/j.destud.2015.03.001
Published: MAY 2015
ISSN: 0142-694X
eISSN: 1872-6909
Record 18 of 50
127
By: Wudhikarn, R (Wudhikarn, Ratapol); Chakpitak, N (Chakpitak, Nopasit); Neubert, G (Neubert,
Gilles)
Title: Use of an Analytic Network Process and Monte Carlo Analysis in New Product Formula Selection
Decisions
Source: ASIA-PACIFIC JOURNAL OF OPERATIONAL RESEARCH
Volume: 32
Issue: 2
Article Number: 1550007
DOI: 10.1142/S0217595915500074
Published: APR 2015
ISSN: 0217-5959
eISSN: 1793-7019
Record 19 of 50
By: Minetola, P (Minetola, P.); Iuliano, L (Iuliano, L.); Calignano, F (Calignano, F.)
Author Identifiers:
Author
ResearcherID Number
Minetola, Paolo
ORCID Number
0000-0002-5917-5273
Title: A customer oriented methodology for reverse engineering software selection in the computer aided
inspection scenario
Source: COMPUTERS IN INDUSTRY
Volume: 67
Pages: 54-71
DOI: 10.1016/j.compind.2014.11.002
Published: FEB 2015
ISSN: 0166-3615
eISSN: 1872-6194
Record 20 of 50
By: Bulut, E (Bulut, Emrah); Duru, O (Duru, Okan); Kocak, G (Kocak, Gazi)
Author Identifiers:
Author
Duru, Okan
ResearcherID Number
ORCID Number
0000-0001-7966-0025
Title: Rotational priority investigation in fuzzy analytic hierarchy process design: An empirical study on
the marine engine selection problem
128
Source: APPLIED MATHEMATICAL MODELLING
Volume: 39
Issue: 2
Pages: 913-923
DOI: 10.1016/j.apm.2014.07.018
Published: JAN 15 2015
ISSN: 0307-904X
eISSN: 1872-8480
Record 21 of 50
By: Anojkumar, L (Anojkumar, L.); Ilangkumaran, M (Ilangkumaran, M.); Vignesh, M (Vignesh, M.)
Title: A decision making methodology for material selection in sugar industry using hybrid MCDM
techniques
Source: INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
Volume: 51
Issue: 2
Special Issue: SI
Pages: 102-126
DOI: 10.1504/IJMPT.2015.071770
Published: 2015
ISSN: 0268-1900
eISSN: 1741-5209
Record 22 of 50
By: Azadeh, A (Azadeh, A.); Asadzadeh, SM (Asadzadeh, S. M.); Tadayoun, S (Tadayoun, S.)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Title: Optimization of operator allocation in a large multi product assembly shop through unique
integration of simulation and genetic algorithm
Volume: 76
Issue: 1-4
Pages: 471-486
DOI: 10.1007/s00170-014-6213-9
Published: JAN 2015
129
ISSN: 0268-3768
eISSN: 1433-3015
Record 23 of 50
By: Gucdemir, H (Gucdemir, Hulya); Selim, H (Selim, Hasan)
Title: Integrating multi-criteria decision making and clustering for business customer segmentation
Volume: 115
Issue: 6
Pages: 1022-1040
DOI: 10.1108/IMDS-01-2015-0027
Published: 2015
ISSN: 0263-5577
eISSN: 1758-5783
Record 24 of 50
By: Izadikhah, M (Izadikhah, Mohammad)
Title: A fuzzy goal programming based procedure for Machine Tool Selection
Volume: 28
Issue: 1
Pages: 361-372
DOI: 10.3233/IFS-141311
Published: 2015
ISSN: 1064-1246
eISSN: 1875-8967
Record 25 of 50
By: Lee, CKH (Lee, Carmen Kar Hang); Tse, YS (Tse, Y. S.); Ho, GTS (Ho, G. T. S.); Choy, KL (Choy,
K. L.)
130
Title: Fuzzy association rule mining for fashion product development
Volume: 115
Issue: 2
Pages: 383-399
DOI: 10.1108/IMDS-09-2014-0277
Published: 2015
ISSN: 0263-5577
eISSN: 1758-5783
Record 26 of 50
By: Lin, CT (Lin, Ching-Torng); Yang, YS (Yang, Yuan-Shan)
Title: A Linguistic Approach to Measuring the Attractiveness of New Products in Portfolio Selection
Source: GROUP DECISION AND NEGOTIATION
Volume: 24
Issue: 1
Pages: 145-169
DOI: 10.1007/s10726-014-9384-8
Published: JAN 2015
ISSN: 0926-2644
eISSN: 1572-9907
Record 27 of 50
By: Rizzuti, S (Rizzuti, Sergio)
Edited by: Thompson, MK (Thompson, MK); Giorgetti, A (Giorgetti, A); Citti, P (Citti, P); Matt, D
(Matt, D); Suh, NP (Suh, NP)
Title: A procedure based on robust design to orient towards reduction of information content
Source: 9TH INTERNATIONAL CONFERENCE ON AXIOMATIC DESIGN (ICAD 2015)
Book Series Title: Procedia CIRP
Volume: 34
Pages: 37-43
DOI: 10.1016/j.procir.2015.07.033
Published: 2015
Conference Title: 9th International Conference on Axiomatic Design (ICAD)
Conference Location: Florence, ITALY
131
ISSN: 2212-8271
ISBN: *****************
Record 28 of 50
By: Kajtaz, M (Kajtaz, Mladenko); Subic, A (Subic, Aleksandar); Takla, M (Takla, Monir)
Author Identifiers:
Author
Subic, Aleksandar
ResearcherID Number
ORCID Number
0000-0002-3141-8915
Title: AN EXTENDED SUBSTRUCTURING TECHNIQUE FOR EFFICIENT EVALUATION OF
NONLINEAR LOAD-BEARING STRUCTURES IN THE CONCEPTUAL DESIGN STAGE
Source: INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS
Volume: 11
Issue: 6
DOI: 10.1142/S0219876213500862
Published: DEC 2014
ISSN: 0219-8762
eISSN: 1793-6969
Record 29 of 50
By: Zhou, J (Zhou, J.); Guo, G (Guo, G.); Liu, F (Liu, F.); Dong, Y (Dong, Y.); Li, H (Li, H.); Lin, L (Lin,
L.); Yang, F (Yang, F.)
Title: A MULTI-DIMENSIONAL METHOD FOR EVALUATING A PRODUCT'S CONCEPTUAL
SCHEMES
Source: SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING
Volume: 25
Issue: 3
Pages: 184-198
Published: NOV 2014
ISSN: 2224-7890
132
Record 30 of 50
By: Sun, RR (Sun, Ruirui); Wang, XL (Wang, Xiaoling); Zhou, ZY (Zhou, Zhengyin); Ao, XF (Ao,
Xuefei); Sun, XP (Sun, Xiaopei); Song, MR (Song, Mingrui)
Title: Study of the comprehensive risk analysis of dam-break flooding based on the numerical simulation
of flood routing. Part I: model development
Source: NATURAL HAZARDS
Volume: 73
Issue: 3
Pages: 1547-1568
DOI: 10.1007/s11069-014-1154-z
Published: SEP 2014
ISSN: 0921-030X
eISSN: 1573-0840
Record 31 of 50
By: Kim, S (Kim, Sojung); Yoon, B (Yoon, Byungun)
Title: A systematic approach for new service concept generation: Application of agent-based simulation
Volume: 41
Issue: 6
Pages: 2793-2806
DOI: 10.1016/j.eswa.2013.10.012
Published: MAY 2014
ISSN: 0957-4174
eISSN: 1873-6793
Record 32 of 50
By: Wang, TC (Wang, Ti-chun); Yang, AJ (Yang, Ai-jun); Zhong, SS (Zhong, Shi-sheng)
Title: MULTI-ATTRIBUTE EXTENSION FUZZY OPTIMIZED DECISION-MAKING MODEL OF
SCHEME DESIGN
Source: TEHNICKI VJESNIK-TECHNICAL GAZETTE
Volume: 21
Issue: 2
Pages: 239-247
Published: APR 2014
133
ISSN: 1330-3651
eISSN: 1848-6339
Record 33 of 50
By: Chang, CW (Chang, Che-Wei)
Title: Develop a ranking algorithm for the green building project
Volume: 48
Issue: 2
Pages: 911-921
DOI: 10.1007/s11135-012-9812-2
Published: MAR 2014
ISSN: 0033-5177
eISSN: 1573-7845
Record 34 of 50
By: Hodgett, RE (Hodgett, Richard E.); Martin, EB (Martin, Elaine B.); Montague, G (Montague, Gary);
Talford, M (Talford, Mark)
Title: Handling uncertain decisions in whole process design
Source: PRODUCTION PLANNING & CONTROL
Volume: 25
Issue: 12
Pages: 1028-1038
DOI: 10.1080/09537287.2013.798706
Published: 2014
ISSN: 0953-7287
eISSN: 1366-5871
Record 35 of 50
By: Kang, YY (Kang, Yuyun); Tang, DB (Tang, Dunbing)
134
Title: An approach to product solution generation and evaluation based on the similarity theory and Ant
Colony Optimisation
Volume: 27
Issue: 12
Pages: 1090-1104
DOI: 10.1080/0951192X.2013.855945
Published: 2014
ISSN: 0951-192X
eISSN: 1362-3052
Record 36 of 50
By: Kaygisiz Ertug, Z (Kaygisiz Ertug, Zeliha); Girginer, N (Girginer, Nuray)
Title: A Multi Criteria Approach For Statistical Software Selection in Education
Source: HACETTEPE UNIVERSITESI EGITIM FAKULTESI DERGISI-HACETTEPE UNIVERSITY
JOURNAL OF EDUCATION
Volume: 29
Issue: 2
Pages: 129-143
Published: 2014
ISSN: 1300-5340
Record 37 of 50
By: Le, S (Le, Sun); Dong, H (Dong, Hai); Hussain, FK (Hussain, Farookh Khadeer); Hussain, OK
(Hussain, Omar Khadeer); Ma, JG (Ma, Jiangang); Zhang, YC (Zhang, Yanchun)
Author Identifiers:
Author
ResearcherID Number
Dong, Hai
E-9101-2010
Hussain, Omar P-7065-2015
ORCID Number
0000-0002-7033-5688
0000-0002-5738-6560
Title: Multicriteria Decision Making with Fuzziness and Criteria Interdependence in Cloud Service
Selection
Source: 2014 IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ-IEEE)
Book Series Title: IEEE International Fuzzy Systems Conference Proceedings
Pages: 1929-1936
Published: 2014
135
Conference Title: IEEE International Conference on Fuzzy Systems
Conference Location: Beijing, PEOPLES R CHINA
Sponsor(s): IEEE
ISSN: 1544-5615
ISBN: 978-1-4799-2072-3
Record 38 of 50
By: Su, CH (Su, Chung-Ho); Chen, KTK (Chen, Ken T-K.); Fan, KK (Fan, Kuo-Kuang)
Edited by: Meen, TH (Meen, TH); Prior, SD (Prior, SD); Lam, ADKT (Lam, ADKT)
Title: A novel hybrid FDM, AHP, TOPSIS approach for successful serious game design and evaluation
framework
Source: INNOVATION, COMMUNICATION AND ENGINEERING
Pages: 199-202
Published: 2014
Conference Title: 2nd International Conference on Innovation, Communication and Engineering (ICICE)
Conference Date: OCT 26-NOV 01, 2013
Conference Location: Qingdao, PEOPLES R CHINA
Sponsor(s): China Univ Petr; Taiwanese Inst Knowledge Innovat
ISBN: 978-1-315-81573-2; 978-1-138-00117-6
Record 39 of 50
By: Azadeh, A (Azadeh, A.); Sheikhalishahi, M (Sheikhalishahi, M.); Koushan, M (Koushan, M.)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Title: An integrated fuzzy DEA-Fuzzy simulation approach for optimization of operator allocation with
learning effects in multi products CMS
Source: APPLIED MATHEMATICAL MODELLING
Volume: 37
Issue: 24
Pages: 9922-9933
DOI: 10.1016/j.apm.2013.05.039
136
ISSN: 0307-904X
eISSN: 1872-8480
Record 40 of 50
By: Senol, MB (Senol, Mehmet Burak); Dagdeviren, M (Dagdeviren, Metin); Kurt, M (Kurt, Mustafa)
Title: A MULTI CRITERIA APPROACH FOR AIRCRAFT COCPIT INTERFACE EVALUATION
Source: JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI
UNIVERSITY
Volume: 28
Issue: 4
Pages: 685-693
Published: DEC 2013
ISSN: 1300-1884
eISSN: 1304-4915
Record 41 of 50
By: Sun, ZY (Sun, Zhiyu); Zhou, JL (Zhou, Jianlan)
Title: An Accidents Analysis and Analytic Network Process Model to Identify Faulty Behavior Risk in
Work System of Hydropower Construction
Source: SENSOR LETTERS
Volume: 11
Issue: 11
Pages: 2156-2158
DOI: 10.1166/sl.2013.2965
Published: NOV 2013
ISSN: 1546-198X
eISSN: 1546-1971
Record 42 of 50
By: Wu, C (Wu, Chong); Zhang, XY (Zhang, Xin-ying); Yeh, IC (Yeh, I-Cheng); Chen, FY (Chen, Feiyu); Bender, J (Bender, Jacob); Wang, TN (Wang, Tie-nan)
Author Identifiers:
137
Author
ResearcherID Number
Yeh, I-Cheng
ORCID Number
0000-0002-1051-7607
Title: Evaluating competitiveness using fuzzy analytic hierarchy process-A case study of Chinese airlines
Source: JOURNAL OF ADVANCED TRANSPORTATION
Volume: 47
Issue: 7
Pages: 619-634
DOI: 10.1002/atr.183
Published: NOV 2013
ISSN: 0197-6729
eISSN: 2042-3195
Record 43 of 50
By: Méxas, Mirian Picinini Picinini; Costa, Helder Gomes; Quelhas, Osvaldo Luiz Gonçalves
Author Identifiers:
Author
ResearcherID Number
ORCID Number
0000-0001-9945-0367
Title: Avaliação da importância relativa dos critérios para a seleção de Sistemas Integrados de Gestão
(ERP) para uso em empresas da construção civil
Title: Evaluation of the importance of criteria for the selection of Integrated Management Systems (ERP)
for use in civil construction companies
Source: Gestão & Produção
Volume: 20
Issue: 2
Pages: 337-356
DOI: 10.1590/S0104-530X2013000200007
Published: 2013-06
ISSN: 1806-9649
Accession Number: SCIELO:S0104-530X2013000200007
Record 44 of 50
By: Shipley, MF (Shipley, M. F.); Johnson, M (Johnson, M.); Pointer, L (Pointer, L.); Yankov, N
(Yankov, N.)
Title: A fuzzy attractiveness of market entry (FAME) model for market selection decisions
Volume: 64
138
Issue: 4
Pages: 597-610
DOI: 10.1057/jors.2012.59
Published: APR 2013
ISSN: 0160-5682
Record 45 of 50
By: Fatchurrohman, N (Fatchurrohman, N.); Sulaiman, S (Sulaiman, S.); Sapuan, SM (Sapuan, S. M.);
Ariffin, MKA (Ariffin, M. K. A.); Baharuddin, BTHT (Baharuddin, B. T. H. T.)
Author Identifiers:
Author
ResearcherID Number
Sapuan, Mohd Sapuan
ORCID Number
0000-0003-0627-7951
Edited by: Yuwono, AH (Yuwono, AH)
Title: New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study:
Metal Matrix Composite Component
Source: ADVANCES IN MATERIALS, PROCESSING AND MANUFACTURING
Volume: 789
Pages: 82-86
DOI: 10.4028/www.scientific.net/AMR.0.82
Published: 2013
Conference Title: 13th International Conference on Quality in Research (QiR 2013)
Conference Location: Yogyakarta, INDONESIA
ISSN: 1022-6680
ISBN: 978-3-03785-757-1
Record 46 of 50
By: Jindal, A (Jindal, Anil); Sangwan, KS (Sangwan, Kuldip Singh)
Title: An Integrated Fuzzy Multi-Criteria Evaluation of Sustainable Reverse Logistics Network Models
Source: 2013 IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ - IEEE 2013)
Published: 2013
Conference Title: IEEE International Conference on Fuzzy Systems (FUZZ)
139
Conference Location: Hyderabad, INDIA
Sponsor(s): IEEE; IEEE Computat Intelligence Soc; IEEE Computat Intelligence Soc, Hyderabad
Chapter; IEEE Computat Intelligence Soc, Calcutta Chapter
ISSN: 1098-7584
ISBN: 978-1-4799-0020-6
Record 47 of 50
By: Peng, AH (Peng, Anhua)
Title: SPA-Based Approach to Decision Making in Conceptual Design
Source: 2013 25TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC)
Book Series Title: Chinese Control and Decision Conference
Pages: 1623-1627
Published: 2013
Conference Title: 25th Chinese Control and Decision Conference (CCDC)
Conference Location: Guiyang, PEOPLES R CHINA
Sponsor(s): IEEE; NE Univ; IEEE Ind Elect Chapter; IEEE Harbin Sect Control Syst Soc Chapter;
Guizhou Univ; IEEE Control Syst Soc; Syst Engn Soc China; Chinese Assoc Artificial Intelligence;
Chinese Assoc Automat, Tech Comm Control Theory; Chinese Assoc Aeronaut, Automat Control Soc;
Chinese Assoc Syst Simulat, Simulat Methods & Modeling Soc; Intelligent Control & Management Soc
ISSN: 1948-9439
ISBN: 978-1-4673-5532-2; 978-1-4673-5533-9
Record 48 of 50
By: Sakthivel, G (Sakthivel, G.); Ilangkumaran, M (Ilangkumaran, M.); Nagarajan, G (Nagarajan, G.);
Shanmugam, P (Shanmugam, P.)
Title: Selection of best biodiesel blend for IC engines: an integrated approach with FAHP-TOPSIS and
FAHP-VIKOR
Source: INTERNATIONAL JOURNAL OF OIL GAS AND COAL TECHNOLOGY
Volume: 6
Issue: 5
Pages: 581-612
DOI: 10.1504/IJOGCT.2013.056153
Published: 2013
140
ISSN: 1753-3309
eISSN: 1753-3317
Record 49 of 50
By: Silva, JP (Silva, Joaquim P.); Fernandes, JA (Fernandes, Jose Antonio); Goncalves, JJ (Goncalves,
Jose Joaquim); Cunha, MM (Cunha, Maria Manuela)
Edited by: Rocha, A (Rocha, A); Reis, LP (Reis, LP); Cota, MP (Cota, MP); Painho, M (Painho, M);
Neto, MC (Neto, MC)
Title: Criteria for ERP selection using an AHP approach
Source: PROCEEDINGS OF THE 2013 8TH IBERIAN CONFERENCE ON INFORMATION
SYSTEMS AND TECHNOLOGIES (CISTI 2013)
Book Series Title: Iberian Conference on Information Systems and Technologies
Published: 2013
Conference Title: 8th Iberian Conference on Information Systems and Technologies (CISTI)
Conference Location: Lisboa, PORTUGAL
ISSN: 2166-0727
ISBN: *****************
Record 50 of 50
By: Su, CH (Su, Chung-Ho); Chen, KTK (Chen, Ken T. -K.); Fan, KK (Fan, Kuo-Kuang)
Author Identifiers:
Author
曹, 黎侠
ResearcherID Number
ORCID Number
F-8177-2014
Title: Rough Set Theory Based Fuzzy TOPSIS on Serious Game Design Evaluation Framework
Source: MATHEMATICAL PROBLEMS IN ENGINEERING
DOI: 10.1155/2013/407395
Published: 2013
ISSN: 1024-123X
eISSN: 1563-5147
141
Web of Science™
[6]
Record 1 of 36
By: Tsai, CF (Tsai, Chih-Fong); Chen, ZY (Chen, Zong-Yao)
Title: Crossing the fuzzy front end chasm: Effective product project concept selection using a 2-tuple
fuzzy linguistic approach
Volume: 25
Issue: 3
Pages: 755-770
DOI: 10.3233/IFS-120682
Published: 2013
ISSN: 1064-1246
Record 2 of 36
By: Wang, WW (Wang, Weiwei); Yang, XY (Yang, Xiaoyan)
Edited by: Zhang, J (Zhang, J); Wang, ZJ (Wang, ZJ); Zhu Sr (Zhu, SR); Meng, XM (Meng, XM)
Title: An Evaluation Method of Software Interface Design Used on Home Appliances
Source: INFORMATION TECHNOLOGY APPLICATIONS IN INDUSTRY, PTS 1-4
Volume: 263-266
Pages: 1559-1563
DOI: 10.4028/www.scientific.net/AMM.263-266.1559
Part: 1-4
Published: 2013
Conference Title: International Conference on Information Technology and Management Innovation
(ICITMI2012)
Conference Location: Guangzhou, PEOPLES R CHINA
Sponsor(s): Guangdong Univ Business Studies, Informat Sci Sch
ISSN: 1660-9336
ISBN: 978-3-03785-574-4
Record 3 of 36
142
By: You, HX (You, Houxing)
Edited by: Yarlagadda, P (Yarlagadda, P); Yang, SF (Yang, SF); Lee, KM (Lee, KM)
Title: A novel approach for product design scheme evaluation with non-functional attributes
Source: INFORMATION TECHNOLOGY APPLICATIONS IN INDUSTRY II, PTS 1-4
Volume: 411-414
Pages: 2511-2515
Published: 2013
Conference Title: 2nd International Conference on Information Technology and Management Innovation
(ICITMI 2013)
Conference Location: Zhuhai, PEOPLES R CHINA
ISSN: 1660-9336
ISBN: 978-3-03785-864-6
Record 4 of 36
By: Zhou, JL (Zhou, Jian-Lan); Zhe-Hua, B (Zhe-Hua, Bai); Sun, ZY (Sun, Zhi-Yu)
Title: Safety Assessment of High-Risk Operations in Hydroelectric-Project Based on Accidents Analysis,
SEM, and ANP
Source: MATHEMATICAL PROBLEMS IN ENGINEERING
DOI: 10.1155/2013/530198
Published: 2013
ISSN: 1024-123X
eISSN: 1563-5147
Record 5 of 36
By: Disney, SM (Disney, Stephen M.); Bogataj, M (Bogataj, Marija); Tang, O (Tang, Ou)
Author Identifiers:
Author
Disney, Stephen
Tang, Ou
ResearcherID Number
ORCID Number
0000-0003-2505-9271
0000-0003-3058-7431
Title: Sixteenth international working seminar on production economics, Innsbruck, 2010
Volume: 140
Issue: 2
Special Issue: SI
143
Pages: 557-558
DOI: 10.1016/j.ijpe.2012.07.019
Published: DEC 2012
ISSN: 0925-5273
Record 6 of 36
By: Hicdurmaz, M (Hicdurmaz, Mumin)
Edited by: Cortellessa V (Cortellessa, V); Muccini, H (Muccini, H); Demirors, O (Demirors, O)
Title: A Fuzzy Multi Criteria Decision Making Approach to Software Life Cycle Model Selection
Source: 2012 38TH EUROMICRO CONFERENCE ON SOFTWARE ENGINEERING AND
ADVANCED APPLICATIONS (SEAA)
Book Series Title: EUROMICRO Conference Proceedings
Pages: 384-391
DOI: 10.1109/SEAA.2012.71
Published: 2012
Conference Title: 38th EUROMICRO Conference on Software Engineering and Advanced Applications
(SEAA) / 15th EUROMICRO Digital Systems Design (DSD)
Conference Location: Cesme, TURKEY
Sponsor(s): ASELSAN A S; Turkish Aerosp Industries, Inc (TAI); Sci & Technol Res Council Turkey
(TUBITAK); Middle E Tech Univ; IEEE Comp Soc
ISSN: 1089-6503
ISBN: 978-0-7695-4790-9
Record 7 of 36
By: Tadic, S (Tadic, Snezana); Zecevic, S (Zecevic, Slobodan); Krstic, M (Krstic, Mladen)
Edited by: Cokorilo, O (Cokorilo, O)
Title: CITY LOGISTICS TERMINAL LOCATION SELECTION USING COMBINED FUZZY AHP
AND FUZZY TOPSIS ANALYSIS
Source: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TRAFFIC AND TRANSPORT
ENGINEERING (ICTTE)
Pages: 345-357
Published: 2012
Conference Title: 1st International Conference on Traffic and Transport Engineering (ICTTE)
Conference Location: Belgrade, SERBIA
Sponsor(s): Sci Res Ctr Ltd; Int Journal Traff & Transport Engn; Kirilo Sav Inst; S E Europe Transport
Observ; Univ Belgrade, Fac Mech Engn, Innovat Ctr
144
ISBN: 978-86-916153-0-7
Record 8 of 36
By: Wang, CH (Wang, Chih-Hsuan)
Title: Facilitating customer involvement into the decision-making process of concept generation and
concept evaluation for new product development
Source: 2012 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND
ENGINEERING MANAGEMENT (IEEM)
IEEM
Pages: 2068-2072
Published: 2012
Conference Title: IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM)
Conference Location: HONG KONG
Sponsor(s): IEEE; IEEE Technol Management Council, Singapore Chapter; IEEE Singapore Sect; IEEE
Systems, Man, & Cybernet Soci Hong Kong Chapter
ISSN: 2157-3611
ISBN: 978-1-4673-2945-3
Record 9 of 36
By: Yang, QW (Yang, Qingwei); Wang, NC (Wang, Naichao); Lin, M (Lin, Ma)
Book Author(s): Jiang, ZY
Edited by: Chen, WZ (Chen, WZ); Xu, XP (Xu, XP); Dai, PQ (Dai, PQ); Chen, YL (Chen, YL)
Title: Application of Radial Basis Function Neural Network to Support Concept Evaluation
Source: ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4
Volume: 472-475
Pages: 1926-1931
Published: 2012
Conference Title: 3rd International Conference on Manufacturing Science and Engineering (ICMSE
2012)
Conference Location: Xiamen, PEOPLES R CHINA
Sponsor(s): Fujian Univ Technol; Xiamen Univ; Fuzhou Univ; Huaqiao Univ; Univ Wollongong; Fujian
Mech Engn Soc; Hong Kong Ind Technol Res Ctr
145
ISSN: 1022-6680
ISBN: 978-3-03785-370-2
Record 10 of 36
By: Zhou, JL (Zhou Jian-lan); Sun, ZY (Sun Zhi-yu)
Edited by: Jiang, CB (Jiang, CB); Yang, ZJ (Yang, ZJ)
Title: Research of hydropower construction work system safety evaluation based on SEM and ANP model
Source: ADVANCES IN HYDROLOGY AND HYDRAULIC ENGINEERING, PTS 1 AND 2
Volume: 212-213
Pages: 1030-1033
Published: 2012
Conference Title: International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE
2012)
Conference Location: Zhangjiajie, PEOPLES R CHINA
Sponsor(s): Changsha Univ Sci & Technol; Hunan Univ; Xiangtan Univ; Nanhua Univ; Hunan Univ Sci
& Technol; Hunan City Univ
ISSN: 1660-9336
ISBN: 978-3-03785-486-0
Record 11 of 36
By: Chang, KF (Chang, Kuei-Feng); Yang, HW (Yang, Hao-Wei)
Title: A study of cosmetic bundle by utilizing a fuzzy Analytic Hierarchy Process (AHP) to determine
preference of product attributers toward customer value
Source: AFRICAN JOURNAL OF BUSINESS MANAGEMENT
Volume: 5
Issue: 22
Pages: 8728-8739
ISSN: 1993-8233
146
Record 12 of 36
By: Chan, SL (Chan, S. L.); Ip, WH (Ip, W. H.); Kwong, CK (Kwong, C. K.)
Author Identifiers:
Author
IP, W.H.
ResearcherID Number
J-2941-2013
ORCID Number
0000-0001-6609-0713
Title: Closing the loop between design and market for new product idea screening decisions
Volume: 38
Issue: 6
Pages: 7729-7737
DOI: 10.1016/j.eswa.2010.12.136
Published: JUN 2011
ISSN: 0957-4174
Record 13 of 36
By: Godaliyadde, D (Godaliyadde, D.); Phylip-Jones, G (Phylip-Jones, G.); Yang, ZL (Yang, Z. L.);
Batako, AD (Batako, A. D.); Wang, J (Wang, J.); Godaliyadde, MM (Godaliyadde, M. M.)
Author Identifiers:
Author
ResearcherID Number
yang, zaili
A-6493-2013
Batako, Andre B-4581-2012
Lin, Zhao
C-8319-2011
ORCID Number
0000-0003-1385-493X
0000-0002-4613-7067
0000-0002-6131-9723
Title: A subjective risk management approach for modelling of failure induced ship vibrations
Source: JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY
Volume: 10
Issue: 2
Pages: 3-16
Published: APR 2011
ISSN: 1476-1548
Record 14 of 36
By: Cui, PJ (Cui Pengju); Li, H (Li Hua)
Edited by: Gao, QJ (Gao, QJ)
Title: The Service Quality Evaluation of Machine Tools in Manufacturing Shop
147
Source: MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1 AND
2
Volume: 228-229
Pages: 981-987
Part: 1-2
Published: 2011
Conference Title: International Academic Conference on Machinery, Materials Science and Engineering
Applications
Conference Location: Wuhan Univ Sci & Technol, Wuhan, PEOPLES R CHINA
Sponsor(s): Wuhan Univ Sci & Technol; Univ Iowa; Hubei Mech Engn Soc; Chinese Mech Engn Soc
Conference Host: Wuhan Univ Sci & Technol
ISSN: 1022-6680
ISBN: 978-3-03785-111-1
Record 15 of 36
By: He, W (He, Wei)
Edited by: Zhou X (Zhou, X)
Title: Fuzzy Logic Applications in Sacrificial Shear Keys Scheme Comparison
Source: 2011 INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL SCIENCEICEES 2011
Book Series Title: Energy Procedia
Volume: 11
Pages: 3318-3324
DOI: 10.1016/j.egypro.2011.10.689
Published: 2011
Conference Title: International Conference on Energy and Environmental Science (ICEES)
Conference Date: OCT, 2011
Sponsor(s): Singapore Inst Electron
ISSN: 1876-6102
ISBN: *****************
Record 16 of 36
By: Khaled, A (Khaled, Abdelilah); Idrissi, MAJ (Idrissi, Mohammed Abdou Janati)
Edited by: Ariwa, E (Ariwa, E); ElQawasmeh, E (ElQawasmeh, E)
Title: A Learning Driven Model for ERP Software Selection Based on the Choquet Integral: Small and
Medium Enterprises Context
148
Source: DIGITAL ENTERPRISE AND INFORMATION SYSTEMS
Book Series Title: Communications in Computer and Information Science
Volume: 194
Pages: 358-371
Published: 2011
Conference Title: International Conference on Digital Enterprise and Information Systems
Conference Location: London Metropolitan Univ, London, ENGLAND
Sponsor(s): Springer
Conference Host: London Metropolitan Univ
ISSN: 1865-0929
ISBN: 978-3-642-22602-1
Record 17 of 36
By: Lin, XH (Lin Xiao-hua); Feng, YX (Feng Yi-xiong); Tan, JR (Tan Jian-rong); An, XH (An Xianghua)
Edited by: Tian, WY (Tian, WY); Xu, LL (Xu, LL)
Title: A hybrid fuzzy DEMATEL-VIKOR method for product concept evaluation
Source: NEW TRENDS AND APPLICATIONS OF COMPUTER-AIDED MATERIAL AND
ENGINEERING
Volume: 186
Pages: 230-235
DOI: 10.4028/www.scientific.net/AMR.186.230
Published: 2011
Conference Title: International Conference on Computer-aided Material and Engineering
Conference Location: Hangzhou, PEOPLES R CHINA
Sponsor(s): Zhejiang Econom & Trade Polytechn; Inst Elect & Informat Technol
ISSN: 1022-6680
ISBN: 978-3-03785-024-4
Record 18 of 36
By: Wang, JS (Wang, Jen-Sheng); Liu, CH (Liu, Che-Hung); Shyu, JZ (Shyu, Joseph Z.); Huang, HW
(Huang, Hsiao-Wen)
Title: Applying Fuzzy AHP to Study the KSFs of Information Security Management
149
Source: IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ 2011)
Pages: 2026-2032
Published: 2011
Conference Title: IEEE International Conference on Fuzzy Systems (FUZZ 2011)
Conference Location: Taipei, TAIWAN
Sponsor(s): IEEE; IEEE Computat Intelligence Soc; Natl Chiao Tung Univ; Natl Univ Tainan; Natl
Cheng Kung Univ; Osaka Prefecture Univ; Natl Sci Council; Minist Educ; Bur Foreign Trade
ISSN: 1098-7584
ISBN: 978-1-4244-7317-5
Record 19 of 36
By: Zhang, FL (Zhang Fanglan); Yang, ML (Yang MingLang)
Edited by: Pan, YH (Pan, YH); Sun, SQ (Sun, SQ); Zhou, MQ (Zhou, MQ); Pan, FH (Pan, FH); Lin, ZK
(Lin, ZK); Hu, ZY (Hu, ZY)
Title: Using Integrated Quality Function Deployment and Ergonomics Approach for Product Design
Source: 2011 IEEE 12TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED INDUSTRIAL
DESIGN & CONCEPTUAL DESIGN, VOLS 1 AND 2: NEW ENGINES FOR INDUSTRIAL DESIGN:
INTELLIGENCE - INTERACTION - SERVICES
Book Series Title: International Conference on Computer Aided Industrial Design and Conceptual Design
CAID&CD
Pages: 782-785
Published: 2011
Conference Title: 12th IEEE International Conference on Computer-Aided Industrial Design and
Conceptual Design
Conference Location: Chongqing, PEOPLES R CHINA
Sponsor(s): IEEE ,Beijing Sect; Chongqing Acad Sci & Technol; Zhejiang Univ; Ind Design Inst, Chinese
Mech Engn Soc; Chongqing Univ; Zhejiang Univ, Modern Ind Design Inst; China Comp Soc, CAD & CG
Profess Comm; Hong Kong Polytechn Univ; Delft Univ Technol; Wright State Univ; Zhejiang Univ, City
Coll; NW Polytechn Univ, Jiang Zhen Fdn Ind Design Train Ctr; Shanxi Aviat Soc; Carnegie Mellon Univ
ISBN: 978-1-4673-0121-3
Record 20 of 36
By: Wey, WM (Wey, Wann-Ming)
Title: EVALUATING INTERDEPENDENT ARCHITECTURAL PROJECTS: AN INTEGRATED
APPROACH
Source: JOURNAL OF ARCHITECTURAL AND PLANNING RESEARCH
150
Volume: 27
Issue: 3
Pages: 204-218
Published: FAL 2010
ISSN: 0738-0895
Record 21 of 36
By: Bai, Y (Bai, Ying); Wang, DL (Wang, Dali)
Title: Applying Fuzzy Multi-Criteria Decision Making for Optimal Robots and Manipulators Selection
Source: IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE 2010)
Pages: 1803-1808
Published: 2010
Conference Title: IEEE International Symposium on Industrial Electronics (ISIE 2010)
Conference Location: Bari, ITALY
Sponsor(s): IEEE; IEEE Ind Elect Soc; IEEE Control Syst Soc; Soc Instrument & Control Engineers
ISBN: 978-1-4244-6391-6
Record 22 of 36
By: Buyukozkan, G (Buyukozkan, Gulcin); Ruan, D (Ruan, Da)
Edited by: Vanhoof, K (Vanhoof, K); Ruan, D (Ruan, D); Li, T (Li, T); Wets, G (Wets, G)
Title: A COMBINED FUZZY GROUP DECISION MAKING FRAMEWORK TO EVALUATE AGILE
SUPPLY CHAIN ENABLERS
Source: INTELLIGENT DECISION MAKING SYSTEMS
Book Series Title: World Scientific Proceedings Series on Computer Engineering and Information
Science
Volume: 2
Pages: 299-304
DOI: 10.1142/9789814295062_0047
Published: 2010
Conference Title: 4th International Conference on Intelligent Systems and Knowledge Engineering (ISKE
2009)
Conference Location: Hasselt Univ, Hasselt, BELGIUM
Sponsor(s): SCK-CEN; FWO; UGent; SW Jiaotong Univ
Conference Host: Hasselt Univ
151
ISBN: 978-981-4295-05-5
Record 23 of 36
By: Demirel, T (Demirel, Tufan); Demirel, NC (Demirel, Nihan Cetin); Ozdemir, Y (Ozdemir, Yavuz)
Edited by: Vanhoof, K (Vanhoof, K); Ruan, D (Ruan, D); Li, T (Li, T); Wets, G (Wets, G)
Title: PRIORITIZATION OF TOURISM TYPES USING FUZZY ANALYTIC NETWORK PROCESS
Source: INTELLIGENT DECISION MAKING SYSTEMS
Science
Volume: 2
Pages: 514-519
DOI: 10.1142/9789814295062_0079
Published: 2010
Conference Title: 4th International Conference on Intelligent Systems and Knowledge Engineering (ISKE
2009)
Conference Location: Hasselt Univ, Hasselt, BELGIUM
Sponsor(s): SCK-CEN; FWO; UGent; SW Jiaotong Univ
Conference Host: Hasselt Univ
ISBN: 978-981-4295-05-5
Record 24 of 36
By: Sevkli, M (Sevkli, Mehmet); Zaim, S (Zaim, Selim); Turkyilmaz, A (Turkyilmaz, Ali); Satir, M (Satir,
Metin)
Author Identifiers:
Author
ResearcherID Number
Sevkli, Mehmet G-2364-2011
ORCID Number
0000-0002-3127-793X
Title: An Application of Fuzzy Topsis Method for Supplier Selection
Source: 2010 IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS (FUZZ-IEEE 2010)
Published: 2010
Conference Title: 2010 IEEE World Congress on Computational Intelligence
Conference Location: Barcelona, SPAIN
Sponsor(s): IEEE; IEEE Computat Intelligence Soc; Int Neural Network Soc; Evolut Program Soc; IET
152
ISSN: 1098-7584
ISBN: 978-1-4244-6920-8
Record 25 of 36
By: Ustundag, A (Ustundag, Alp); Kilinc, MS (Kilinc, Mehmet Serdar); Yanik, S (Yanik, Seda)
Edited by: Ruan, D (Ruan, D); Li, TR (Li, TR); Xu, Y (Xu, Y); Chen, GQ (Chen, GQ); Kerre, EE (Kerre,
EE)
Title: FUZZY MULTICRITERIA SELECTION OF SCIENCE PARKS FOR START-UP COMPANIES
Source: COMPUTATIONAL INTELLIGENCE: FOUNDATIONS AND APPLICATIONS:
PROCEEDINGS OF THE 9TH INTERNATIONAL FLINS CONFERENCE
Science
Volume: 4
Pages: 478-483
Published: 2010
Conference Title: 9th International FLINS Conference on Computational Intelligence: Foundations and
Applications
Conference Location: Emei, PEOPLES R CHINA
ISBN: 978-981-4324-69-4
Record 26 of 36
By: Carnero, MC (Carnero, M. C.)
Author Identifiers:
Author
ResearcherID Number
Carnero, Maria del Carmen I-1128-2014
ORCID Number
0000-0002-9170-2264
Title: Selection of condition monitoring techniques using discrete probability distributions: a case study
Source: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART OJOURNAL OF RISK AND RELIABILITY
Volume: 223
Issue: O1
Pages: 99-117
DOI: 10.1243/1748006XJRR186
Published: MAR 2009
153
ISSN: 1748-006X
Record 27 of 36
By: Chen, SM (Chen, Shouming); Zheng, HL (Zheng, Hongliang)
Title: A Fuzzy AHP Approach for Evaluating New Product Projects in Mobile Commerce
Source: 2009 INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE AND
COMPUTATIONAL INTELLIGENCE, VOL I, PROCEEDINGS
Pages: 460-464
DOI: 10.1109/AICI.2009.179
Published: 2009
Conference Title: International Conference on Artificial Intelligence and Computational Intelligence
Conference Location: Shanghai, PEOPLES R CHINA
Sponsor(s): Shanghai Univ Elect Power; IEEE; Springer; APNNA; NSFC
ISBN: 978-0-7695-3816-7
Record 28 of 36
By: Li, Y (Li Yan); Zhang, F (Zhang Fan)
Edited by: Wu, JQ (Wu, JQ); Ye, ZW (Ye, ZW)
Title: Study on Performance Appraisal Method of College Teachers
Source: 2009 INTERNATIONAL SYMPOSIUM ON COMPUTER NETWORK AND MULTIMEDIA
TECHNOLOGY (CNMT 2009), VOLUMES 1 AND 2
Pages: 1361-1364
Published: 2009
Conference Title: 1st International Symposium on Computer Network and Multimedia Technology
Conference Location: Wuhan, PEOPLES R CHINA
Sponsor(s): Res Assoc Modern Educ & Comp Sci; Huazhong Normal Univ; Huazhong Univ Sci &
Technol; Wuhan Univ; Natl Technol Univ Ukraine; Harbin Inst Technol; Columbia Univ
ISBN: 978-1-4244-5272-9
Record 29 of 36
By: Li, YL (Li Yanli)
Edited by: Zeng, Q (Zeng, Q); Marinov, M (Marinov, M); Johnson, N (Johnson, N); Yang, C (Yang, C)
Title: Evaluation of Reverse Logistics Providers by AHP Approach
154
Source: PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE OF MANAGEMENT SCIENCE
AND INFORMATION SYSTEM, VOLS 1-4
Pages: 1506-1510
Published: 2009
Conference Title: International Conference of Management Science and Information System
Conference Location: Jiaozuo City, PEOPLES R CHINA
ISBN: 978-0-982-24410-4
Record 30 of 36
By: Qiao, H (Qiao Hong); Dong, XC (Dong Xuechen)
Title: Research on Training Evaluation of Enterprise Employees
Source: CCDC 2009: 21ST CHINESE CONTROL AND DECISION CONFERENCE, VOLS 1-6,
PROCEEDINGS
Pages: 75-78
Published: 2009
Conference Title: 21st Chinese Control and Decision Conference
Conference Location: Guilin, PEOPLES R CHINA
Sponsor(s): NE Univ; IEEE Ind Elect Singapore Chapter; Guilin Univ Elect Technol; IEEE Control Syst
Soc; IEEE Ind Elect Soc
ISBN: 978-1-4244-2723-9
Record 31 of 36
By: Qiao, H (Qiao Hong); Dong, XC (Dong Xue-chen); Yu, JL (Yu Jin-long)
Edited by: Chen, JX (Chen, JX); Hu, ZB (Hu, ZB)
Title: Evaluate the Personnel Training Effect of Electric Power Enterprise Based on AHP-FUZZY
Approach
Source: FIRST INTERNATIONAL WORKSHOP ON DATABASE TECHNOLOGY AND
APPLICATIONS, PROCEEDINGS
Pages: 638-641
DOI: 10.1109/DBTA.2009.69
Published: 2009
Conference Title: 1st International Workshop on Database Technology and Applications
Conference Date: APR 25-26, 2009
Conference Location: Wuhan, PEOPLES R CHINA
Sponsor(s): Wuhan Univ Sci & Technol; Huazhong Univ Sci & Technol
155
ISBN: 978-0-7695-3604-0
Record 32 of 36
By: Sudzina, F (Sudzina, Frantisek); Pucihar, A (Pucihar, Andreja); Lenart, G (Lenart, Gregor)
Edited by: Soliman, KS (Soliman, KS)
Title: ERP System Total Cost of Implementation in Slovak and Slovenian Companies
Source: INNOVATION AND KNOWLEDGE MANAGEMENT IN TWIN TRACK ECONOMIES:
CHALLENGES & SOLUTIONS, VOLS 1-3
Pages: 733-740
Published: 2009
Conference Title: 11th International-Business-Information-Management-Association Conference
Conference Date: JAN 04-06, 2009
Conference Location: Cairo, EGYPT
Sponsor(s): Int Business Informat Management Assoc
ISBN: 978-0-9821489-0-7
Record 33 of 36
By: Eraslan, E (Eraslan, Erguen); Dagdeviren, M (Dagdeviren, Metin)
Author Identifiers:
Author
ResearcherID Number
DAGDEVIREN, METIN
ORCID Number
0000-0003-2121-5978
Edited by: Xia, GP (Xia, GP); Deng, XQ (Deng, XQ)
Title: COMPARISON OF THE MULTI-CRITERIA DECISION MAKING METHODS FOR MACHINE
SELECTION PROBLEM
Source: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE ON COMPUTERS AND
INDUSTRIAL ENGINEERING, VOLS 1-3
Pages: 642-647
Published: 2008
Conference Title: 38th International Conference on Computers and Industrial Engineering
Conference Date: OCT 31-NOV 02, 2008
Conference Location: Beihang Univ, Beijing, PEOPLES R CHINA
Conference Host: Beihang Univ
156
ISBN: 978-7-121-07437-0
Record 34 of 36
By: Fei, J (Fei, Jun); Yao, RM (Yao, Ruimin); Yu, LH (Yu, Lihua)
Edited by: Ma, J (Ma, J); Yin, YL (Yin, YL); Yu, J (Yu, J); Zhou, SG (Zhou, SG)
Title: Fuzzy Analytic Hierarchy Process Application to E-government Performance Evaluation
Source: FIFTH INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS AND KNOWLEDGE
DISCOVERY, VOL 3, PROCEEDINGS
Pages: 376-380
DOI: 10.1109/FSKD.2008.443
Published: 2008
Conference Title: 5th International Conference on Fuzzy Systems and Knowledge Discovery
Conference Location: Jinan, PEOPLES R CHINA
Sponsor(s): Shandong Univ; Int Nat Computat & Knowledge Discovery Assoc
ISBN: 978-0-7695-3305-6
Record 35 of 36
By: Razmi, J (Razmi, Jafar); Sangari, MS (Sangari, Mohamad Sadegh)
Title: A hybrid multi-criteria decision making model for ERP system selection
Source: 2008 4TH INTERNATIONAL CONFERENCE ON INFORMATION AND AUTOMATION
FOR SUSTAINABILITY (ICIAFS)
Pages: 410-416
Published: 2008
Conference Title: 4th International Conference on Information and Automation for Sustainability
Conference Location: Colombo, SRI LANKA
Sponsor(s): IEEE
ISBN: 978-1-4244-2899-1
Record 36 of 36
By: Akay, D (Akay, Diyar); Kulak, O (Kulak, Osman)
Author Identifiers:
Author
ResearcherID Number
ORCID Number
Edited by: Liu, SF (Liu, SF)
157
Title: Evaluation of product design concepts using grey-fuzzy information axiom
Source: PROCEEDINGS OF 2007 IEEE INTERNATIONAL CONFERENCE ON GREY SYSTEMS
AND INTELLIGENT SERVICES, VOLS 1 AND 2
Pages: 1040-1045
Published: 2007
Conference Title: IEEE International Conference on Grey Systems and Intellignet Services
Conference Location: Nanjing, PEOPLES R CHINA
Sponsor(s): IEEE; Natl Nat Sci Fdn China; Nanjing Univ, Aeronaut & Astronaut; Grey Syst Soc China;
NUAA, Coll Econ & Management; NUAA, Inst Grey Syst Studies
ISBN: 978-1-4244-1294-5
158
10. Grants and Funded Projects
Type
Title
IBM SUR
Award
Kadir Has
University
Scientific
Research
Project
(KHAS-BAP)
Eureka Project
TSE Project
TTGV Project
Grant
Dates
Capacity
Urban Engineering Studies in Istanbul, 137,000 $
the prestigious IBM Shared University
Research (SUR) award
Development of an effective hazardous 15,000 TL
material (HAZMAT) management
system for Marmara Region through a
multiple-criteria decision making
method (with Dr. F. Samanlioglu)
20132015
Project
member
20092010
Project
member
An expert system design for quality
control in household manufacturing, in
collaboration with Istanbul Technical
University, Arçelik A.S., TEE A.S.
and Bruel Kayer Co. of Denmark (as a
member for a year of 1993)
TS 62: Twist drills, National standard
preparation, in collaboration with
Makina Takim Endustrisi A.S. and
Turkish Standardization Institute
(TSE)
The design and manufacturing of thinceramic- and TIN-coated cutting tools,
Makina Takim Endustrisi A.S.
275,000 $
1993
Project
member
N/A
19961998
Project
member
52,000 $
19961997
Project
member
159
11. Editorial and Refereeing Responsibilities
11.1. Editorial
Journals I have been servicing in different capacities, indexed by SCI® and SCI®-E
Journals
Capacity
International Journal of Production Research
(SCI®)
Journal of Intelligent Manufacturing (SCI®-E)
Editorial Board
Member
Associate Editor
Dates
[2008-P]
[20072014]
Journals I have been servicing in different capacities, indexed by other institutions
Journal
Capacity
International Journal of Economics, Commerce and
Management
Editorial Board
Member
Editorial Board
Member
Editorial Board
Member
Associate Editor
The Scientific World Journal
Science Discovery
International Journal of Fuzzy Systems and
Advanced Applications
International Journal of Supply Chain Management
International Journal of Computer Science and
Information Engineering
Asian Journal of Industrial Engineering
Advances in Fuzzy Systems
Modeling and Simulation in Engineering
Asian Journal of Information Management
Asian Journal of Marketing
Research Journal of Business Management
Editorial Board
Member
Editorial Board
Member
Associate Editor
Editorial Board
Member Board
Editorial
Member Editor
Technical
Technical Editor
Technical Editor
Dates
[2015-P]
[2013-P]
[2013-P]
[2013-P]
[2012-P]
[2010-2014]
[2008-2010]
[2007-P]
[2007-P]
[2007-2009]
[2007-2009]
[2007-2009]
Journals I have been servicing as Editorial Review Board Members
Journal
Dates
Asia Pacific Management Review
Journal of Computers
Engineering Letters
[2005-P*]
[2009-P]
[2010-P]
*P:
Present
11.2. Refereeing
For Articles in the Following Journals
International Journal of Production Economics (SCI®-E)
Asia Pacific Management Review
Asia-Pacific Journal of Operational Research
160
Academic Year
(Qty)
Up to 2009 (13)
Computers and Industrial Engineering (SCI®-E)
European Journal of Industrial Engineering
International Journal of Approximate Reasoning (SCI®)
Information Sciences (SCI®)
International Journal of Design Engineering
International Journal of Production Research (SCI®)
Journal of Engineering Design (SCI®-E)
Endüstri Mühendisliği Dergisi
International Journal of Information Technology & Decision Making
(SCI®-E)
Journal of Computers
Annals of Operations Research (SCI®-E)
Journal of the Faculty of Engineering and Architecture of Gazi
University (SCI®-E)
International
Journal of Information Technology and Decision Making
Journal of Sakarya University-Institute of Science and Engineering
International Journal of Computer Integrated Manufacturing (SCI®-E)
International Journal of Industrial and Systems Engineering (EI®)
Expert Systems with Applications (SCI®-E)
Journal of Systems Science and Systems Engineering (SCI®-E)
Universidad Nacional de Colombia Revista Ingeniería Investigación
For Papers in the Following Conferences/Congresses/Symposiums
The 5rd International Conference on Industrial Engineering and Operations
Management (IEOM’15)
The Global Conference on Engineering and Technology Management
(GCETM’14)
The 2nd International Conference on Communications, Computing and
Control Applications (CCCA’12)
The 3rd International Conference on Industrial Engineering and Operations
Management 2012 (IEOM’2012)
The 9th International Logistics and Supply Chain Congress (LM-SCM’
2011)
The 2nd International Conference on Industrial Engineering and Operations
Management 2011 (IEOM’2011)
161
2009(1)
2009(1)
2009(2)
2009(1)
2009(1)
2010(2)
2010(1)
2010(1)
2011(1)
2011(1)
2011-2012 (2)
2011-2012 (2)
2011-2012 (1)
2011-2012 (2)
2011-2012 (1)
2011-2012 (1)
2011-2012 (1)
2012-2013 (1)
2012-2013 (1)
2012-2013 (2)
2013-2014 (1)
2013-2014 (2)
2013-2014 (1)
2014-2015 (1)
Academic
Year (Qty)
2014-2015 (2)
2013-2014 (2)
2012-2013 (6)
2011-2012 (2)
2011(1)
2010(4)
International Symposium on Innovations in Intelligent Systems and
Applications (INISTA’10)
2010(3)
IIE Annual Conference and Expo 2010 (IERC’10)
2010(2)
IEEE International Symposium on Industrial Electronics (IEEE ISIE’10)
2010(1)
IIE Annual Conference and Expo 2009 (IERC’09)
2009(2)
IEEE Int’l Conf. on Cybernetics & Intelligent Syst.(CIS) and Robotics,
Automation & Mechatronics (RAM)(CIS-RAM)
2008(1)
2005(1)
International Conference on Information Systems (ICIS)
For Evaluating Proposals for the Following
Publishers
Type of Work
Academic Year (Qty)
Taylor and Francis Group
Hindawi Publishing Group
New Journal
Special Issue
2012-2013 (1)
2012-2013 (1)
2011-2012 (3)
For Personal Evaluations for the Following
Institutions
Sabancı University
Nisantası University
Type of Work
Academic Year (Qty)
Periodic View
Job Evaluation
2012-2013 (1)
2013-2014 (1)
11.3. Evaluating Tasks
Program/Project
Capacity
Organization
Task
TÜBİTAK Project (2015)
TÜBİTAK Career
Development
Project
(2012)
TÜBİTAK
Project
(20091.Term)1
TÜBİTAK Project (20092.Term)1
TÜBİTAK Project (2009,
2011)1
External
Referee
External
Referee
Panelist
TÜBİTAK
TÜBİTAK
Panelist
Referee
External
Referee
TÜBİTAK
Proposal
Evaluation
Proposal
Evaluation
Proposal
Evaluation
Proposal
Evaluation
Progress
Proposal
Reports
Evaluation
TÜBİTAK
TÜBİTAK
For R&D Facility Evaluations
Capacity
Martur Sünger ve Koltuk Tesisleri
Ticaret A.Ş. (2010)
Referee
Bosch Sanayi ve Ticaret A.Ş. (2013)
Referee
Samet Kalıp ve Madeni Eşya San. ve
Tic. A.Ş. (2015)
Referee
1
2
3
5
3
2
Assigned by
Ministry of Science, Industry and
Technology
Technology
Technology (Turkey)
Support Programme for Scientific and Technological Research Projects
The Scientific and Technical Research Council of Turkey
162
# of
Projects
1
1
12. Memberships and Professional Affiliations
Memberships/Professional Affiliations
Union of Chambers of Turkish Engineers and
Architects (UCTEA)
UCTEA Chamber of Mechanical Engineers: Branch
of Industrial Engineering
Professional Engineers in Ontario (PEO),
CANADA
Institute of Industrial Engineers (IIE)
Society of ITU (Istanbul Technical University)
Alumni
Mechanical Design and Production Society
(MATİM), TURKEY
Society of Istanbul Project Management (IPYD),
TURKEY
Operational Research Society, TURKEY (YAD)
Turkish Industrial Engineers Group (TURK IE)
Society of Fuzzy Systems, TURKEY (BUSIDE)
International Society on Multiple Criteria Decision
Making (MCDM)
International Association of Engineers (IAENG)
IAENG Society of Industrial Engineering
IAENG Society of Operations Research
IAENG Society of Artificial Intelligence
IAENG Society of Information System Engineering
Danube Adria Association for Automation and
Mfg. (DAAAM) International
IEOM Society
Decision Sciences Institute (DSI)
International Society for Environmental
Information Sciences
theIRED Institute of Research Engineers and
Doctors
Lean Enterprise Institute
International Association of Risk and Compliance
Professionals (IARCP)
International Institute of Social and Economic
Sciences (IISES)
Council of Industrial Engineering Academia
Department Heads (CIEADH of IIE)
Institute of Industrial Engineers (IIE)
American Society for Quality (ASQ)
Society of Manufacturing Engineers (SME)
Society of Modeling and Simulation International
163
Capacity
Registered Professional
Engineer
Registered Professional
Engineer (P.Eng.)
Senior Member
Member
Member
Member
Dates
[1989-P*]
[2001-P]
[2006-P]
[2006-P]
[2007-P]
[2007-P]
Member
Member
Member
Member
[2007-P]
[2007-P]
[2008-P]
Member
Member
Member
Member
Member
[2008-P]
[2008-P]
[2008-P]
[2008-P]
[2008-P]
Member
[2012-P]
Member
Member
[2014-P]
[2015-P]
Member
[2015-P]
Senior Member
[2015-P]
Member
[2015-P]
Member
[2015-P]
Member
[2015-P]
Member
[2013-2014]
Student Member
Student Member
Student Member
Member
[1999-2000]
[1999-2002]
[1999-2002]
[2007-2008]
[2008-P]
North American Fuzzy Information Processing
Society (NAFIPS)
*
P: Present
164
Member
[2007-2008]
13. Student Supervision
13.1. Student Counseling
Supervision of
Institution
Academic Counseling
Academic Year
Graduate
Students
Kadir Has
University
Students in M.Sc. in Industrial
Engineering
Undergraduate
Students
İstanbul
Kültür
University
Kadir Has
University
[2009-2010]
[2010-2011]
[2011-2012]
[2012-2013]
[2013-2014]
[2014-2015]
[2004-2005]
[Fall, Spring and Summer]
Freshman
Freshman
Sophomore and Senior
Freshman and Junior
Sophomore and Senior
Senior, Minor, Dual Degree,
Transfer and Old Students
[2005-2006]
[2006-2007]
[2007-2008]
[2008-2009]
[2009-2010]
[2010-2011]
Freshman and Sophomore,
Minor, Dual Degree, Transfer
Students
Junior, Minor, Dual Degree,
Transfer Students
Senior, Minor, Dual Degree,
Transfer Students
Minor, Dual Degree, Transfer
Students
[2011-2012]
[2012-2013]
[2013-2014]
[2014-2015]
13.2. Undergraduate Thesis Supervised
Institution
Academic Year
Number of Projects
2003-2004
2004-2005
2006-2007
2007-2008
2008-2009
2009-2010
2010-2011
2011-2012
2012-2013
9
8
1
5
3
3
3
4
4
İstanbul Kültür University
Kadir Has University
165
(Fall+Spring)
2013-2014
1+4
13.3. Undergraduate Thesis Read as Committee Member
Institution
Academic Year
Number of Projects
2003-2004
2004-2005
2006-2007
2007-2008
2008-2009
2009-2010
2010-2011
2011-2012
2012-2013
2013-2014
2014-2015
11
7
1
9
10
11
9
13
9
13
5
İstanbul Kültür University
(Fall+Spring)
13.4. Graduate Thesis Supervised
[Kadir Has University]
Completed
No.
1
2
Type of
Work
Graduation
Year
Supervised
M.Sc.
2013
Özlenen
Şentürk
Supervised
M.Sc.
2013
Thesis
Student
Capacity
Type of
Work
Graduation
Year
(Expected)
Solving of an engineering
problem through a multiplecriteria decision making
method
Yunus Ali
Erol
Supervised
M.Sc.
2016
To be determined
N.
Yağmur
Aslan
Supervised
M.Sc.
2016
Thesis
A fuzzy ANP approach to
financial performance analysis
of airlines companies
Six sigma project evaluation
under fuzziness in food industry
Student
Capacity
Sinem
Gürel
On-going
No.
1
2
166
3
To be determined
4
To be determined
D. Kemal
Supervised
Aslan
Birol Kaya Supervised
M.Sc.
2016
M.Sc.
2016
13.5. Graduate Theses Read as Committee Member
No. Thesis
1
2
3
4
5
6
7
A multi-agent architecture for
modeling and simulation in military
operation planning [in-Turkish]
Effects of work and employee
qualifications on work satisfaction
and motivation in aviation industry
[in-Turkish]
Analysis of the effects of usability
and functionality factors for
consumers’ internet banking site
selection [in-Turkish]
Warehouse selection through
choquet integral method in supply
chain management [in-Turkish]
Option pricing in electricity trading
in Turkey
Cross-dock models for supply chain
design
Advertisement sales plan
optimization and revenue
management on TV broadcasting [inTurkish]
8
Study of knowledge management
adoption in supply chain by fuzzy
MCDM approaches
9
Adoption of information technology
and its effect on quality and
performance in service industries
Student
Type of
Work
University
Year
Murat
Mala
Ph.D.
Sakarya
University
2010
Ahmet S.
Suntur
Ph.D.
İ.T.Ü.
2012
Murat
Durucu
Ph.D.
İ.T.Ü.
2012
Erkan
Çaka
M.Sc.
İ.T.Ü.
2012
Ecem
Taşdemir
Hande
Çakır
İlkay
Gültaş
Sachin K.
Patil
M.Sc.
M.Sc.
Ph.D.
Ph.D.
Ph.D.
Kadir Has
University
Kadir Has
University
İ.T.Ü.
Sardar
Vallabhbhai
National
Institute of
Technology,
Surat, India
Siksha O
Anusandhan
University,
Bhubaneswar,
Odisha, India
2013
2013
2013
2014
2015
13.6. Graduate Thesis Monitored
No. Thesis
1
To be determined [in-Turkish]
Student
Type of
Work
University
Year
Özge
Tuğrul
Ph.D.
İ.T.Ü.
2013
167
14. Other Professional Activities
14.1. Organization Activities
Capacity
(Member of/)
Organizing
Committee
Organizing
Committee
Organizing
Committee
Moderator and
Organization
Moderator and
Organization
Co-Organizer
Steering
Committee
Name of Activity
Dates
Symposium on Computer Use and 1990
Automation in Industry
XIV. Operational Research and
1991
Industrial Engineering National
Congress (YAEM`1991)
Symposium on Computer Use and 1991
Automation in Industry
6-Sigma and its Applications
Panel
Conference on Innovation and
Competitive Advantage
The Workshop on Women in
Industrial Engineering Academia
2012 (WIEA’12)
VII/VIII/IX. Istanbul Informatics
Congress on Smart Cities
Moderator
VII. Istanbul Informatics
Congress on Smart Cities: Panel
on Business Continuity and
Security in Public Sector
Co-Organizer
IEEE International Conference on
Fuzzy Systems (FUZZ-IEEE’15)
Feb
2007
Apr
2008
May
2012
Nov
2013
Nov
2014
Nov
2015
Nov
2013
Aug
2015
Place
Istanbul Technical
University, KOSGEB
and TU Berlin, Istanbul,
TURKEY
Istanbul Technical
University, TURKEY
Istanbul Technical
University, KOSGEB
and TU Berlin, Istanbul,
TURKEY
Kadir Has University,
Istanbul, TURKEY
Istanbul, TURKEY
and Auburn University,
Istanbul TURKEY
and Informatics
Association of Turkey
(TBD), Istanbul
TURKEY
and Informatics
Association of Turkey
(TBD), Istanbul
TURKEY
METU and IEEE,
Istanbul, TURKEY
14.2. Sessions Chaired at Organizations
Name of Activity
Dates
YA/EM’04 (XXIV. Operational
Research and Industrial Engineering
National Congress)
IMS’04 (The 4th Int’l Symposium on
Intelligent Manufacturing Systems)
Jun 16-18, Cukurova University, Adana,
2004
TURKEY
Sep 6-8,
2004
168
Place
Sakarya University, Sakarya,
TURKEY
YA/EM’07 (XXVII. Operational
National Congress)
YA/EM’08 (XXVIII. Operational
National Congress)
YA/EM’09 (XXIX. Operational
National Congress)
YA/EM’10 (XXX. Operational Research
and Industrial Engineering National
Congress)
IWSPE’10 (The 16th Int’l Working
Seminar on Production Economics
(Sessions: Innovation Management and
Simulation Applications)
IEOM’11 (The 2nd Int’l Conf. on
Industrial Engineering and Operations
Management)
YA/EM’11 (XXXI. Operational
National Congress)
Track Chair, The 3rd Int’l Conf. on
Industrial Eng. and Operations
FUZZYSS’13 (The 3rd Int’l Fuzzy
Systems Symposium)
Track Chair, The 4th Int’l Conf. on
Industrial Eng. and Operations
IMC’15 (The 9 the International
Management Conference)
Jul 2-4,
2007
Dokuz Eylul University, Izmir,
TURKEY
Jun 30July 2,
2008
Jun 22-24,
2009
Galatasaray University, Istanbul,
TURKEY
Jun 30July 2,
2010
Mar 1-5,
2010
Sabanci University, Istanbul,
TURKEY
Jan 22-24,
2011
Kuala Lumpur, MALAYSIA
Jul 5-7,
2011
Sakarya University, Sakarya,
TURKEY
Jul 3-6,
2012
Istanbul, TURKEY
Bilkent University, Ankara,
TURKEY
Innsbruck, AUSTRIA
Oct 24-25, Kültür University, Istanbul,
2013
TURKEY
Jan 7-9,
Bali, INDONESIA
2014
Nov 4-6,
2015
Bucharest, ROMANIA
14.3. Scientific Committee Member
Capacity
(Member of )
Academic
Advisory
Scientific
Board
Committee
Academic
Advisory
Scientific
Board
Committee
Academic
Advisory
Academic
Board
Advisory
Scientific
Board
Committee
Scientific
Committee
Academic
Advisory
Board
Name of Activity
Dates
Place
XXVII. Operation Research and
Industrial
II. SystemEngineering
EngineeringNational
National
Congress (YA/EM`07)
Congress
XXVIII. Operation Research and
Industrial
The
SeriesEngineering
of SeminarsNational
on
Congress
(YA/EM`08),
Optimization
in Industrial
XXIX. Operation
Research and
Engineering
Industrial
Engineering
National
XXX. Operation Research
and
Congress (YA/EM`09)
Industrial
Engineering
National
X. National Symposium on
Congress
(YA/EM`10)
Production
Research
(UAS’10)
VIII.
International
Logistics
and
Supply
Chain Congress
XXXI. Operation
Research and
(ILSCC’10)
Congress (YA/EM`11)
169
Jul 2-4,
2007
Feb 6-8,
2008
Jun 30Jul 2,
Jun
232008
29,
Jun 2008
2224,
2009
Jun 30Jul
Sep2,162010
18, 2010
Nov
4-5,
2010
Jul 5-7,
2011
Dokuz Eylul
University,
Izmir,
Yıldız Technical
TURKEY Istanbul,
University,
Galatasaray University,
TURKEY
Istanbul,University,
TURKEY
Kocaeli
Kocaeli,
TURKEY
Bilkent University,
Ankara,
TURKEY
Sabancı University,
Istanbul,
TURKEY
Girne American
University,
Girne,
Istanbul,
TURKEY
CYPRUS
Sakarya University,
Izmit, TURKEY
Academic
Advisory
Technical
Board
Committee
Scientific
Committee
Advisory
Committee
Scientific
Committee
Academic
Advisory
Academic
Board
Advisory
Academic
Board
Advisory
Technical
Board
Committee
Advisory
Committee
Steering
Committee
Program
Committee
Industry
Committee
Advisory
Committee
Scientific
Committee
Academic
Advisory
Board
Steering
Committee
Technical
Committee
Advisory
Committee
Industry
Committee
Program
Committee
Workshop CoChair
Program
Committee
Advisory
Committee
Industrial Engineering Software
and Applications
Congress
and
The
2nd International
Conference
Exhibition
(EMYK`11)
on
Engineering
IX.Industrial
International
Logisticsand
and
Operations
Management
Supply
Chain
Congress
The 3rd International Conference
(IEOM’11)
(ILSCC’11)
on
Engineering
and
TheIndustrial
10th International
Conference
Operations
Management
on Uncertainty
Modeling
in and
XXXII.
Operation
Research
(IEOM’12)
Knowledge
Engineering
and
Industrial
Engineering
National
XXXIII. Operation
Research
and
Decision
Making
(FLINS’12)
Congress
(YA/EM`12)
Industrial
Engineering
National
The International IIE Conference
Congress
(YA/EM`13)
(IIE`13)
The 1st International Conference
on
Operations
TheInformation,
1st International
Conference
Management
and
Statistics
on
TheInformation,
7th IstanbulOperations
Information
(ICIOMS’13)
Management
and Statistics
Technology
Congress
The Global Conference(2013)
on
(ICIOMS’13)
Engineering
and
Technology
The 4th Int’l Conf. on Industrial
Management
(GCETM’14)
Eng. and Operations
Management
(IEOM’14)
The 1st International Symposium
on
Design Engineering
TheIndustrial
15th International
Conference
(ISIDE’14)
on Fuzzy Systems (FS’14)
XXXIV. Operation Research and
Congress (YA/EM`14)
The 8th Istanbul Information
Technology Congress (2014)
The 2nd International Conference
on Information, Operations
Management and Statistics
(ICIOMS’14)
on Information, Operations
Management and Statistics
(ICIOMS’14)
The 5th Int’l Conf. on Industrial
Eng. and Operations Management
(IEOM’15)
The 2015 International Conference
on Neural Networks-Fuzzy
Systems (NN-FS’14)
IEEE International Conference on
Fuzzy Systems (FUZZ-IEEE’15)
Sep 30Oct 222,
Jan
2011
24,
Oct 2011
2729,
2011
Jul 3-6,
2012
Aug 2729, 2012
Jun
2022,
Jun 2012
2628,
2013
Jun 2628,
Sep2013
1-3,
2013
Sep 1-3,
2013
Nov 1314,
Jun 2013
2326,
2014
Jan 7-9,
2014
TMMOB-Chamber of
Mechanical
Engineers:
Kuala
Lumpur,
İzmir
Branch,
İzmir,
MALAYSIA
Izmir, TURKEY
TURKEY
İstanbul, TURKEY
Istanbul, TURKEY
Dogus University,
Istanbul,
TURKEY
IIE and Bilkent
University,
Istanbul,
IIE and Bilkent
TURKEY
University,
Istanbul,
Kuala Lumpur,
TURKEY
MALAYSIA
Kuala Lumpur,
MALAYSIA
Istanbul,
TURKEY
Istanbul Technical
University,
Istanbul,
Bali, INDONESIA
TURKEY
May 8-9,
2014
May 1517, 2014
Jun 2527, 2014
Karabuk University,
Karabuk,
TURKEY
Gdansk, POLAND
Nov 2627, 2014
Dec 810, 2014
Istanbul, TURKEY
Sydney, AUSTRILIA
Dec 810, 2014
Sydney, AUSTRILIA
Mar 3-5,
2015
Dubai, UAE
Mar 1517, 2015
Vienna, AUSTRIA
Aug 2-5,
2015
The 2nd Global Conference on
Engineering & Technology
Management (GCETM’15)
The 3rd International Conference
on Industrial Engineering
(ICIE’15)
Sep 4-5,
2015
METU and IEEE,
Istanbul TURKEY
Chicago, Illinois, USA
170
Nov 2628, 2015
Uludag University,
Bursa, TURKEY
Sardar Vallabbhai
National Institute of
Technology, Surat,
Gujrat, INDIA
Advisory
Committee
The 57th National Convention of
Indian Institution of Industrial
Engineering
Nov 2628, 2015
Advisory
Committee
The 4th International Fuzzy
Systems Symposium
(FUZZYSS’15)
The 16th International Conference
on Fuzzy Systems (FS’15)
The 9th Istanbul Information
Technology Congress (2015)
Global Joint Conference on
Industrial Engineering and Its
Application Areas (GJCIE’16)
on Advancements and Recent
Innovations in Mechanical,
Production and Industrial
Engineering (ARIMPIE’16)
The 3rd Business and Management
Conference (IISES’16)
Nov 5-6,
2015
Scientific
Committee
Steering
Committee
Scientific
Committee
Advisory
Committee
Advisory
Committee
Nov 7-9,
2015
Nov 1819, 2015
Sardar Vallabbhai
National Institute of
Technology, Surat,
Gujrat, INDIA
Yıldız Technical
University, Istanbul,
TURKEY
Rome, ITALY
Istanbul, TURKEY
Jul 1415, 2016
Istanbul, TURKEY
Apr 1516, 2016
New Delhi, INDIA
Mar 2225, 2016
Lisbon, PORTUGAL
14.4. Others



“Introduction to SAP-University Alliance Program” by Seda Baydar, Program
Manager of SAP Turkey, December 2010, Kadir Has University.
Discussant for the paper: Inter-modal Freight Transportation Performance in
Emergency Situations, 16th International Working Seminar on Production Economics
(IWSPE’10), March 1-5, 2010, Innsbruck, AUSTRIA.
Participation to the roundtable for the topic “Advancing to full professor”, managed
by Dr. Alice Smith of Auburn University, Workshop on Women in Industrial
Engineering Academia 2008, July 7-11, Ankara-Istanbul TURKEY.
171
15. Sports and cultural activities







Traveling [Please see the list of countries visited]
Photography
Bodybuilding
Tennis
Jogging
Snow skiing
Watching movies and series
[List of Countries visited]
No. Countries*
Cities
Date(s)
Europe
1
Austria
2
Cyprus
3
Czech Republic
4
5
6
7
8
Denmark
England
Estonia
Finland
France
9
Germany
10
Greece
11
Italy
Innsbruck
Vienna
Kyrenia
Kyrenia
Kyrenia
Nicosia
Nicosia
Nicosia
Famagusta
Prague
Prague
Prague
Prague
Copenhagen
London
Tallinn
Helsinki
Marseilles
Cologne
Hannover
Hannover
Munich
Frankfurt
Stuttgart
Essen
Gelsenkirchen
Düsseldorf
Iserlohn
Athens
Rome
Venice
Verona
Siena
172
2010
2015
2010
2013
2014
2010
2013
2014
2010
2008
2011
2013
2015
2012
1998
2012
2010
2012
1998
1998
2015
2002
2006
2006
2015
2015
2015
2016
2013
2009
2009
2009
2009
12
13
14
15
16
Lithuania
Malta
Norway
Portugal
Romania
17
Spain
Florence
Naples
Naples
Amalfi Coast
Vilnius
La Valetta
Oslo
Lisbon
Bucharest
La Coruna
Bilbao
2009
2009
2011
2011
2013
2014
2010
2016
2015
2010
2014
Toronto
Montreal
Windsor
Ottawa
Detroit
Miami
New York
1998
1999
2000
2001
2001
2009
2009
Kuala Lumpur
Seoul
Kuwait City
Ho Chi Min City
2011
2011
2016
2011
Africa
America
18
Canada
19
United States of America
Asia
20 Malaysia
21 South Korea
22 Kuwait
23 Vietnam
Others
173
16. Awards
[Academic Awards]








Honored with the 25th Year Award in the Profession by Union of Chambers of
Turkish Engineers and Architects (TMMOB)-Chamber of Mechanical Engineers
(2014) (Plate)
Member of M.Sc. Program Team on Urban Engineering awarded by IBM, the
prestigious IBM Shared University Research (SUR) Award (2013)
Honored by the Dean of Faculty of Engineering and Natural Sciences for the Best
Design Project in the 2012-2013 Academic Year (Certificate)
Honored by the Dean of Faculty of Engineering and Natural Sciences for the Best
Design Project in the 2011-2012 Academic Year (Certificate)
Honored by Kadir Has University as “Best Academician Award of the 2010-2011
Academic Year”, presented by President H.E. Abdullah Gül (Plate)
Honored by the Chairman of Board of Trustees and Rector of Kadir Has University
for the scientific articles published in SCI® in the 2006-2007 Academic Year
(Certificate)
Honored by the Rector of Kadir Has University for the scientific articles published in
SCI® in the 2005-2006 Academic Year (Certificate)
Honored by Istanbul Kültür University for the scientific articles published in SCI® in
the 2004-2005 Academic Year (Certificate)
[Supporting Awards]



Received the supporting awards for the published journal articles from Kadir Has
University [Many times]
Received the supporting awards for the published journal articles from TÜBİTAK
(The Scientific and Technological Research Council of Turkey) [Many times]
Received the supporting awards for the published journal articles from Istanbul Kültür
University [2 times]
[Others]






Ranked in 1019 with h-index; 11 and total citations; 827, among the listed Turkish
academics with 6 or higher h-index, according to the “Ranking Web of Universities”,
published by Webometrix as of January 2015 based on Google Scholar
Listed in various editions of Who is Who in Engineering in the World
Listed in various editions of the Leading Engineers of the World
Listed in the Who is Who in Turkey (Türkiye’de Kim Kimdir?), the on-line biography
bank [in-Turkish]
Second awarded by CEO (1998) of MTE A.Ş. for the project, “CAD system
application for cutting tool design”, Kocaeli, TURKEY
Second awarded by CEO (1997) of MTE A.Ş. for the project, “Best gear configuration
used in manufacturing of relief angle of taps with twist channels”, Kocaeli, TURKEY.
174
17. References

Prof.Dr. Cengiz KAHRAMAN
Chairman of Industrial Engineering Department
ISTANBUL TECHNICAL UNIVERSITY
Macka 34367 Istanbul
Tel: 90 212 293 1300 (2073)
Fax: 90 212 240 7260
E-Posta: kahramanc@itu.edu.tr

Tekin ÇETİNKAYA, Industrial Engineer, M.Sc.
Vice President
KIRAN CONSULTING GROUP
4204 Jutland Drive, Suite B
San Diego, California 92117
Tel: (858) 270-9950, Fax: (858) 270-9951
E-mail: tekin@kiran.com

Dr. Fu Zhao
Assistant Professor
PURDUE UNIVERSITY
School of Mechanical Engineering
Chair of Life Cycle Engineering Technical Committee
Manufacturing Engineering Division
585 Purdue Mall, West Lafayette, IN, 47907
Tel: 765-494-6637, Fax: 765-494-0539
E-mail: fzhao@purdue.edu
[Reference Letters] [Available on request]
175

CURRICULUM VITAE - Back to Main Page

Transcription

Similar documents

30th International Congress of Psychology 22

Agricultural Information and IT

To Be Honest Part 07.1

Edmundas Kazimieras ZAVADSKAS

To Be Honest Part 08

Scheduling in the Process Industry