Check Valves - Littlejohninc

Transcription

Check Valves
Knappco
Sure-Seal
VC3022
3” Alum Body
Flanged
Silicon seat
Spring Loaded
This will replace all
Knappco check valves in
the future.
Section C
Dry Bulk Trailer Parts
VA0009-VA0012 - 3” alum flanged
VA0013-VA0016 - 3” alum flanged spring loaded
VA0017-VA0020 - 3” alum threaded
VA0021-VA0024
- 3” alum threaded spring loaded
CHECK P-509, P-509S
BRONZE - HORIZONTAL SWING
SWING CHECK P-2519A
High
Flow Swing Check Valves
Tank Ɣ Dry Bulk Trucks Ɣ Bronze Disc
Threaded Cap Ɣ Threaded Ends
P-509
A rugged multi-purpose swing check for general tank
truck and loading rack installations. All the advantages
of the full flow afforded by swing check design.
P-509S
Same as P-509 except with Composition Disc (sizes
1/4" to 2").
C-35326
Same as P-509 except with Stainless Steel hinge pin
and side plugs.
Milwaukee
ALUMMINUM
Dry Bulk Transports Ɣ Tank Truck
Aluminum Disc With Viton® Seat
150 WOG †
3000 Series Swing Checks
• Cast aluminum bodies with bronze inspection caps.
• forChoice
of models with or without spring loaded flapper.
A rugged multi-purpose swing check
general tank
loading rack installations. All the advantages
• Safety flapper assembly - all flapper assembliesofandfullare
drilled
Full
flow afforded
by swing check •
design,
near flow design - flappers swing out of flow path for
silent operation, leak resistance and quick cap
and pinned and will not come apart.
removal; stainless steel pin and plugs. maximum flow and low resistance.
• Choice of seals: metal-to-metal, Buna or silicone rubber seals. • Large cap designs allow flapper repair/rebuild on unit.
P509-112
P2519A
1 1/2” threaded bronze - brass/viton
3” flanged
3" Threaded Ends (NPT)
P509-2
alum/alum/viton
Length
Part #
Description
7 1/8"
Metal-to-metal seal
3000TE
2” threaded
bronze
brass/viton
High Flow Swing
Check
7 1/8"
Metal-to-metal
seal andValves
spring loaded flapper
3000TESP
7 1/8"
Buna rubber seal
3000TEB
P509-3
7 1/8"
Silicone rubber seal
3000TES
7 1/8"
3000TEBSP Buna seal and spring loaded flapper
3” threaded bronze - brass/viton
7 1/8"
3000TESSP Silicone rubber seal and spring loaded flapper
3000 Series
Swing Checks
LIFT CHECK P-729
LIFT CHECK P-728
ALUMINUM
ALUMINUM
Dry Bulk Transports Ɣ Tank Trucks Ɣ 125 psi WOG †@ 100°F
25 psi @ 350°F Ɣ Spring Loaded
Composition Disc
DIMENSONS-INCHES
Threaded Ends SIZE
A
B
C
1/4
2 1/8
1 1/2
15/16
3/8
2 1/8
1 1/2
1
1/2
2 5/16
1 1/2
1 3/16
3/4
2 5/8
1 11/16
1 1/2
1
3 1/4
2
1 7/8
1 1/4
3 9/16
2 1/8
2 1/16
1 1/2
4
2 3/8
2 3/8
Vibration-proof disc construction, Viton-A* renewable
2
4 3/4
2 3/4
3
disc assures tight close at high temperature operation.
2 1/2
6 1/4
3 11/16
4
Stainless poppet stem and disc retainer, guided top
6 7/8
4 11/16
and bottom3in friction free
bushings. 4 1/4
Dry Bulk Transports Ɣ Tank Trucks Ɣ 125 psi WOG †@ 100°F
25P-2519A-3"
psi @ 350°F Ɣ Spring Loaded
MODEL
Composition Disc
Flanged Ends
DIMENSONS-INCHES
SIZE
D
3
21/32
21/32
21/32
13/16
31/32
1 1/8
1 1/4
1 5/16
1 11/16
1 11/16
A
B
C
D
E
6 7/8
4 1/16
5
4 3/4
4
F
9/16
Vibration-proof disc construction, Viton-A* renewable
disc assures DIMENSION
tight close at high
temperature operation.
DESCRIPTION
Stainless
poppet
and disc retainer, guided top
Diameter
Boltstem
Circle
and bottom in friction-free bushings. Similar Lift
For 3" Square Flange
Check with Quick Coupler Outlet is also available.
Number
of Version
Bolt Holes
For
Threaded
see P-728.
Square
Flanged
(TTMA)
• Cast aluminum bodies with bronze inspection caps.
• Choice3"of
models
with
or without spring loaded flapper.
Length
Part #
Description
• Safety flapper assembly - all flapper assemblies are drilled
• Metal-to-metal
Full flow seal
design - flappers swing out6 of
7/8"flow path for
3001SQN
P729
6 7/8"
Metal-to-metal
and spring
flapper
3001SQSP
maximumsealflow
and loaded
low resistance.
and pinned and will not come apart.
6 7/8"
Buna rubber seal
3001SQB
P728
3” flanged
• Choice of seals: metal-to-metal,
Buna or silicone rubber
seals. • Silicone
Largerubber
capseal
designs allow
flapper repair/rebuild
on unit.
6 7/8"
3001SQS
C
D
E
F
Size of Bolt Holes
P-728
† Non-Shock
Threaded version.
NOTE: P-2519-4" Also Available - Consult Factory.
6 7/8"
3001SQBSP Buna seal and spring loaded flapper
3” threaded
alum/alum/viton
6 7/8"
flapper
3001SQSSP Silicone rubber seal and spring loaded
alum/alum/viton
spring
loaded
Flow Swing
Check Valves 3" Round
Flanged (TTMA)
3" Threaded Ends (NPT) Part #
Length
Description
spring loaded
Length
Description
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change
design, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com
High
MILWAUKEE VALVE
25
MILWAUKEE VALVE
23
DIMENSIONS-INCHES
ANGLE LIFT CHECK P-717F
Part
#
ALUMINUM
SIZE
125 psi WOG at 100°F Ɣ 25 psi WOG at 350°F
DIMENSIONS-INCHES
Square Bolted Cap Ɣ Square Flange
3000N
3000SP
3000B
loaded 3000S
flapper
3000BSP
of models
with
3000SSP
3
A
B
C
D
5
6 7/8 4 3/4 6 3/4
FLANGE SPECIFICATIONS-INCHES
Metal-to-metal seal
Metal-to-metal seal and spring loaded flapper
1/8"
Buna rubber7 seal
Silicone rubber
seal
7 1/8"
Buna seal and spring loaded flapper
7 1/8"
or
without
spring
loaded
Silicone
rubber
seal and
spring
loadedflapper.
flapper
33
SIZE
FLANGE
B.C. DIA.
B.H. DIA.
5 5/8"
5 5/8"
Metal-to-metal
sealSwing Checks
3000TE
5 5/8"
3000
Series
5 5/8"
Metal-to-metal seal and spring
3000TESP
5 5/8"
Buna
rubber seal
3000TEB
uminum bodies with bronze
inspection
caps.
• Choice
5 5/8"
7
1/8"
Silicone
apper assembly - all 3000TES
flapper assemblies
arerubber
drilledseal • Full flow design - flappers swing out ofGaskets
flow can
path
for on page 11.
be found
7 1/8"
Buna seal and spring loaded
flapper
ned and will not come3000TEBSP
apart.
maximum
flow and low resistance.
7 1/8"
Siliconerubber
rubberseals.
seal and
spring
loaded
flapper
3000TESSP
of seals: metal-to-metal,
Buna or silicone
• Large
cap
designs
allow flapper
repair/rebuild on unit.
t#
E
ESP
EB
ES
EBSP
ESSP
SIZE
A
B
3
5
†Non-Shock
C
6 3/4
4 9/16
D
6 3/4
*Registered E.I. DuPont Trademark
Lightweight, positive closing, Viton-A* renewable disc.
Stainless steel poppet stem and disc retainers. Guided
top and bottom in friction free bearings.
3
4 3/4 Sq.
†Non-Shock
5
9/16
MILWAUKEE VALVE
NOTE: This valve was formerly identified by drawing
number C-35417-F.
Valve must be mounted in upright position.
For 2" Threaded Bronze Angle Check see P-717S.
Swing Check Manifold Valves
P717F
Bayco
2” angled3"flanged
Square Flanged (TTMA)
3" high flow swing check valve complete with 2" female NPT port for mounting an air relief valve
Length
3" Threaded
Ends
(NPT)
Part #
Description
alum/alum/viton
Length
Description
6 7/8"
Metal-to-metal
seal
3001SQN
Part #
Description
spring loaded
MILWAUKEE VALVE
31
manifold - silicone flapper
6 7/8"
Metal-to-metal seal and spring
loaded3090M
flapper 3" swing check
3001SQSP
7 1/8"
Metal-to-metal
seal
3090MA
3" swing check manifold with 3" adapter - silicone flapper
ANGLE CHECK P-717SBuna rubber seal
6 7/8"
3001SQB
7 1/8" 3090MB
Metal-to-metal
seal
and spring loaded flapper
3" swing check manifold with 4" adapter - silicone flapper
Security kit for63"7/8"
swing check manifold
Silicone rubber seal
7 1/8" 3030SK
Buna rubber 3001SQS
seal
3090MS
3" swing check manifold with security kit installed - silicone flapper
7/8" with 3" adapter and security kit installed - silicone flapper
Buna seal and spring loaded 7flapper
3001SQBSP
1/8" 3090MAS 3" swing check6 manifold
Silicone rubber
seal
3090MBS
7/8" with 4" adapter and security kit installed - silicone flapper
Silicone
rubber seal and spring
loaded
flapper 3" swing check6 manifold
3001SQSSP
7 1/8"
Buna seal and
spring loaded
flapper
BRONZE
Size
A
DIMENSIONS-INCHES
B
C
D
E
125 psi WOG at 100°F Ɣ 25 psi WOG AT 350°F
2 1/2
4
4 3/4
2 1/2
4
5
Threaded Cap Ɣ CAP
Threaded
Ends
FLANGE
SPECIFICATIONS-INCHES
Size
FLANGE
BOLT DIA.
NO. BOLTS
2
4 3/4 Sq.
3/8
4
{
3091MA
3" swing check manifold with 3" adapter metal to metal flapper
3090MA
7 1/8" 3090MA-DC 3" swing check manifold with 3" adapter with dust cap and chain - silicone flapper
Silicone rubber seal and spring loaded flapper
3090F
3" swing check manifold with 4" female NPT threaded end - silicone flapper
3" Round Flanged (TTMA)3090MA-W 3" swing check manifold with 3" adapter and special bolt holes for Wittig blowers
- silicone flapper
Length
Part #
Description
P717S
3000TESP
- 3” threaded alum/brass spring loaded
3" Square Flanged (TTMA)
2” angled threaded
5 5/8" - 3” flanged alum/brass
Metal-to-metal
seal
3000N
3001SQ
Length
rt #
Description
800.355.1991
Dry Bulk
Products
5 5/8"
Metal-to-metal
seal and spring
loaded
flapper
3000SP
bronze/alum/viton
3001SQSP
- 3” flanged alum/brass spring loaded
6 7/8"
Metal-to-metal
seal
SQN
5 5/8"
Buna rubber seal
3000B
spring
loaded
3090MA
5 5/8" - 3” manifold check w/3” adapter
6 7/8"
Silicone
rubber
seal
Metal-to-metal
seal and spring
loaded
flapper
3000S
SQSP
5 5/8"
Buna seal and spring loaded flapper
6 7/8"
Buna rubber3000BSP
seal
SQB
5 5/8"
Silicone rubber seal and spring
loaded flapper
3000SSP
6 7/8"
Silicone rubber
seal
SQS
6 7/8"
SQBSP Buna seal and spring loaded flapper
7/8"be found on page 11.
SQSSP Silicone rubber seal and spring loaded flapper Gaskets6can
t#
P
Light weight, positive closing. Viton-A* renewable disc.
Guided in friction free bearing. This valve was formerly
identified by drawing number C-35417-S.
Valve must be mounted in upright position.
MILWAUKEE VALVE
27
For 2 1/2" Flanged Aluminum Check, P-717F
DIMENSIONS-INCHES
SIZE
A
B
C
2
2 9/16
2 7/16
2 9/16
252
Spartanburg, SC - Phone: 800.828.6555 - Fax: 864.583.1550
Cincinnati, OH - Phone: 866.879.9773 - Fax: 513.860.1355
3" Round
Flanged
(TTMA) - Fax: 708.442.9229
Chicago,
IL - Phone:
800.621.7131
Length
Description
www.littlejohninc.com
29
MILWAUKEE VALVE
Swing Check Manifold Valves
5 5/8"
Metal-to-metal seal
5 5/8"
Metal-to-metal
seal
and
spring
loaded
flapper
3" high flow swing check valve complete with 2" female NPT port for mounting an air relief valve
5 5/8"
Buna rubber seal
®
9
Knappco
VA0009-VA00012 3'' Check Valve (Flanged)
5
A
Section C
A
4
7
3
2
6
1
.562 DIA.
4 PLACES ON
5.00 DIA. B.C.
7 1/8
4 7/8
SECTION A-A
ITEM
1
2
3
4
5
6
7
PART NUMBER
4379
SEE CHART
1727 1
2
1729B
1730
1731
1734
DESCRIPTION
BODY (ALUMINUM FLANGED)
POPPET ASSY (BRASS / BUNA)
CAP (CALVANIZED STEEL)
SHAFT NUT (BRASS, PLATED)
SHAFT NUT GASKET (HI-TEMP.)
CAP GASKET (HI-TEMP.)
SHAFT (S.S.)
SEALING MEDIA / MATERIAL CHART
QTY.
1
1
1
1
1
1
1
ASSY P/N
VA0009
VA0010
VA0011
VA0012
POPPET P/N
1722A
1739A
1724A
1740A
DESCRIPTION
POPPET ASSY (S.S. / BUNA)
POPPET ASSY (BRASS / VITON)
POPPET ASSY (S.S. / VITON)
1 - ALSO AVAILABLE IN ALUM. (P/N 1733) 2 - ALSO AVAILABLE IN ALUM. (P/N 1735)
PHONE: (816) 741-6600 • (888) 526-5657 • Fax: (816) 741-1061
4304 Mattox Road • Kansas City, MO 64150 • www.knappco.com
Chicago, IL - Phone: 800.621.7131 - Fax: 708.442.9229
253
Knappco
VA00017-VA00020 3'' Check Valve (Threaded)
A
Section C
5
A
4
7
3
2
6
1
7 1/8
SECTION A-A
ITEM
1
2
3
4
5
6
7
PART NUMBER
1726
SEE CHART
1727 1
2
1729B
1730
1731
1734
DESCRIPTION
BODY (ALUMINUM THREADED)
CAP (CALVANIZED STEEL)
SHAFT NUT (BRASS, PLATED)
SHAFT NUT GASKET (HI-TEMP.)
CAP GASKET (HI-TEMP.)
SHAFT (S.S.)
SEALING MEDIA / MATERIAL CHART
QTY.
1
1
1
1
1
1
1
ASSY P/N
VA0017
VA0018
VA0019
VA0020
POPPET P/N
1722A
1739A
1724A
1740A
1 - ALSO AVAILABLE IN ALUM. (P/N 1733) 2 - ALSO AVAILABLE IN ALUM. (P/N 1735)
PHONE: (816) 741-6600 • (888) 526-5657 • Fax: (816) 741-1061
254
DESCRIPTION
POPPET ASSY (S.S. / BUNA)
POPPET ASSY (BRASS / VITON)
POPPET ASSY (S.S. / VITON)
Spartanburg, SC - Phone: 800.828.6555 - Fax:
864.583.1550
4304
Mattox Road • Kansas City, MO 64150 • www.knappco.com
Knappco
13
15
14
12
Section C
VA1015FG 3'' Check Valve
11
SECTION B-B
A
9
2
10
1
8
B
7
B
4
5
.562 DIA.
4 PLACES ON
5.00 DIA. B.C.
A
3
6
67
8
47
8
SECTION A-A
ITEM
PART NUMBER
1
2
3
4
5
6
7
8
9
10
9572
9945
9781
9894
9895
4714
9896
1159
10096
9897
QTY.
DESCRIPTION
BODY
1
POPPET ARM
1
POPPET (BRONZE / SILICONE)
SCREW
1
HEX NUT
1
WASHER (BELLEVILLE)
1
SPRING PIN
1
WASHER (FLAT)
1
CAP
CAP O-RING (VITON)
1
1
1
1
1
1
1
1
1
1
ITEM
PART NUMBER
11
12
13
14
15
10077
9902
9578
9574
9944
DESCRIPTION
GLAND NUT
GLAND O-RING (VITON)
BUSHING
PIVOT ROD
SPRING
QTY.
1
1
1
1
1
REPAIR KITS
PART NUMBER
9946
DESCRIPTION
QTY.
POPPET ASSY (BRONZE / SILICONE) N/A
PHONE: (816) 741-6600 • (888) 526-5657 • Fax: (816) 741-1061
4304 Mattox Road • Kansas City, MO 64150
• www.knappco.com
Spartanburg,
SC - Phone: 800.828.6555 - Fax: 864.583.1550
255
Bayco
Section C
256
Section C
Bayco
257
Milwaukee
CHECK P-509, P-509S
REPAIR PARTS LIST
Section C
P-509 Only
No.
1
DESCRIPTION
Body
SIZE-INCHES/PART NUMBER
1/4
3/8
1/2
3/4
1516-B
1516-C
1516-D
1516-E
1
1516-F
1 1/4
1 1/2
1516-G
1516-H
2
2 1/2
1516-J
3
1516-K
1516-L
4046-L2
2
Cap
4046-D
4046-D
4046-D
4046-E
4046-F
4046-G
4046-H
4046-J
4046-K
3
Lever
44148-B
44148-B
44148-B
4404-E
4404-F
4404-G
4404-H
4404-J
4405-K
4405-L
4
Bronze Disc
38290-D
38290-D
38290-D
38290-E
38290-F
38290-G
38290-H
38290-J
3871-K
3871-L
5
Plug
4210-B
4210-B
4210-B
4210-E
4210-F
4210-F
4210-H
4210-J
4210-L
4210-L
6
Pin
5979-B
5979-B
5979-B
5979-C
5979-D
5979-E
5979-F
5979-H
5979-L
5979-L
7
Disc Retainer
52125-185
52125-185
52125-185
52125-239
52125-239
3177-K
3177-L
8
Washer
--
--
--
--
--
--
--
--
3813-K
3813-L
*9
Disc Assembly
84109-D
84109-D
84109-D
84109-E
84109-F
84109-G
84109-H
84109-J
84109-K
84109-L
52125-185 52125-185 52125-185
*Disc Assembly No. 9 includes Part Nos. 3, 4, 7, 8
P-509S Only
No.
DESCRIPTION
SIZE-INCHES/PART NUMBER
1/4
3/8
1/2
3/4
1 1/4
1 1/2
1
Body
1516-B
1516-C
1516-D
1516-E
1516-F
1
1516-G
1516-H
1516-J
2
2 1/2
--
--
2
Cap
4046-D
4046-D
4046-D
4046-E
4046-F
4046-G
4046-H
4046-J
--
--
3
Lever
4416-B
4416-G
4416-B
4416-E
4416-F
4416-G
4416-H
4416-J
--
--
5
Disc Holder
39143-D
39143-D
39143-D
39143-E
39143-F
39143-G
39143-H
39143-J
--
---
5
Plug
4210-B
4210-B
4210-B
4210-E
4210-F
4210-F
4210-H
4210-J
--
6
Pin
5979-B
5979-B
5979-B
5979-C
5979-D
5979-E
5979-F
5979-H
--
--
7
Disc Retainer
52125-185
52125-185
52125-185
52125-239
52125-239
--
--
52125-185 52125-185 52125-185
8
Disc Nut
3015-B
3015-B
3015-B
3016-B
3016-B
3014-B
3018-Z
3018-Z
--
--
9
Composition Disc
38142-D
38142-D
38142-D
38142-E
38142-F
38142-G
38142-H
38142-J
--
--
24
258
3
MILWAUKEE VALVE
Milwaukee
SWING CHECK P-2519A
Section C
REPAIR PARTS LIST
SIZE-INCHES/
No.
1
2
3
4
5
6
7
8
DESCRIPTION
Body
Cap
Lever
Plug
Pin
Retaining Ring
O-Ring
Lever Bushing
MATERIAL
Aluminum
Aluminum
Aluminum
St. Steel
St. Steel
Carbon Steel
Buna-N
Teflon *
REPAIR KITS
Disc-Lever Assembly (Incl. Lever Bushing)
PART NUMBER
3
15147-L
40290-L
445-L
42124-L
5979-L
52109-362
65118-043
4171-L
84033-L
259
ANGLE LIFT CHECK P-717-F
ANGLE CHECK P-717S
REPAIR PARTS LIST
REPAIR PARTS LIST
Milwaukee
ANGLE LIFT CHECK P-717-F
ANGLE CHECK P-717S
REPAIR PARTS LIST
REPAIR PARTS LIST
Section C
NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
Body
Cap
Disc Guide
Pinch Washer
Spring
Bearing
Cap Screw
Hex Nut
Lock Washer
Seat Disc
NO.
Gasket
1
Lock Nut
2
Disc Assembly Complete 3
PART NO.
4
5
6
7
8
9
10
11
12
13
15129-K
40258-K
84284-K
38220-K
70163-K
4165-L
4256-M
3198-C
38084-C
38180-K
DESCRIPTION
66144-K
Body
31139-H
Cap
84253-K
Disc
Guide
NO.
PART NO.
Pinch Washer
Spring
Bearing
Cap Screw
Hex Nut
Lock Washer
Seat Disc
Gasket
Lock Nut
Disc Assembly Complete
15129-K
40258-K
84284-K
38220-K
70163-K
4165-L
4256-M
3198-C
38084-C
38180-K
66144-K
31139-H
84253-K
LIFT CHECK P-728
REPAIR PARTS LIST
DESCRIPTION
PART NO.
Body
Cap
Disc Holder
Bearing
Disc Nut
Retaining Plate
Seat Disc
Spring
Disc Guide
Disc Assembly
15119-J
4061-J
39114-J
4165-L
3159-F
3884-J
38180-J
70163-J
4620-J
NO. 84459-JDESCRIPTION
1
Body
2
Cap
3
Disc Holder
4
Bearing
5
Disc Nut
6
Retaining Plate
7
Seat Disc
8
Spring
9
Disc Guide
10
Disc Assembly
PART NO.
15119-J
4061-J
39114-J
4165-L
3159-F
3884-J
38180-J
70163-J
4620-J
84459-J
LIFT CHECK P-729
MILWAUKEE VALVE
28
1
2
3
4
5
6
7
8
9
10
REPAIR PARTS LIST
MILWAUKEE VALVE
30
MILWAUKEE VALVE
28
MILWAUKEE VALVE
30
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
260
DESCRIPTION
Body
Top
Disc Guide
Pinch Washer
Cap Screw (4 req.)
Hex Nut (4 req.)
Lock Washer (4 req.)
Lock Nut
Spring
Bearing
Seat Disc
Gasket
PART NO.
NO.
1539-L
40260-L
84284-L
38220-L
4256-M
3198-C
38084-C
31139-H
70163-L
4165-L
38180-L
66146-L
84258-L
1
2
3
4
5
6
7
8
9
10
11
12
13
DESCRIPTION
PART NO.
Body
Top
Disc Guide
Pinch Washer
Cap Screw (4 req.)
Hex Nut (4 req.)
Lock Washer (4 req.)
Lock Nut
Spring
Bearing
Seat Disc
Gasket
1545-L
40266-L
84284-L
38220-L
4256-M
3198-C
38084-C
31139-H
70163-L
4165-L
38180-L
66146-L
84258-L
Cincinnati,
- Phone:
866.879.9773
- Fax: 513.860.1355
The information presented
on this sheet OH
is correct
at the time
of publication. Milwaukee
Valve reserves the right to change
design, and/or materialChicago,
specificationsIL
without
notice. For
the most current -information
access www.milwaukeevalve.com
- Phone:
800.621.7131
Fax: 708.442.9229
32
MILWAUKEE VALVE
34
MILWAUKEE VALVE

Check Valves - Littlejohninc

Transcription

Similar documents

Pneumatic Tank Services Parts Catalog - PTS

Manholes - Littlejohn, Inc.

Product Catalog

Product Sheet Brochure

Click Here to PDF catalog