Lockinex

Transcription

Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Lockinex
TM
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Lockinex Stainless Steel
Balustrade & Handrail System
.
Stainless Steel Brackets
& Tube
.
.
.
ne
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Grade 304
Lockinex (UK) Ltd. Lockinex Works, Hammonds Drive, Eastbourne, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Page 1 of 11 (Lockinex Stainless) 02/14
ne
x
Lo
c
Lo
c
ki
ex
ki
n
ki
n
ex
ki
n
Great Service, Great Quality,
Great Prices.
Lo
c
Lo
c
ki
n
Easy To Install
ex
ki
ex L
oc
Lo
c
.
ki
n
Aesthetically Pleasing
Lo
c
.
ex
BS 4592-0:2006
+A1:2012
Section 5.5.3
(General duty)
ne
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Lo
c
ki
Satin finish
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-503-42.4-SF (To suit 42.4mm x 2mm tube)
62
To suit 42.4mm dia. tube.
25
90
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
90
12
110
95
58
ne
ne
x L
x
Lo
o
ck
ck
in
i
n
e
e
x L
x
Lo
oc
ck
k
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
42
6
All measurements in (mm)
Lo
c
ki
Adjustable handrail support bracket. Fixed from behind the supporting structure.
1 x M8 x 15mm bolt is supplied for this purpose. The maximum material thickness
using this standard bolt is 8mm. (The user must supply longer bolts if required)
Inox-506-42.4-SF (To suit 42.4mm x 2mm tube)
80
80
ki
To suit 42.4mm dia. tube.
Lo
c
25
Apply
adhesive
6
38
42.4
All measurements in (mm)
ne
x
Lo
c
ki
ex
Lo
c
ki
n
ex
Lo
c
Lo
c
ki
n
ex
Tube mounted handrail support bracket with adjustable saddle.
Use adhesive to fix to the supporting tube.
ki
n
ex
42
ki
n
Lo
c
13
62
Page 2 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Hammonds Drive, Eastbourne, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Lockinex
TM
Inox-509-42.4-SF (To suit 42.4mm x 2mm tube)
12
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
82
5mm counter
sunk holes
79
8
58
All measurements in (mm)
Lo
c
ki
ne
ne
x L
x
Lo
oc
ck
k
in
i
ne
e
x L
x
Lo
o
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Wall mounted handrail support bracket.
Ready for welding to handrail tube.
Inox-512-42.4-SF (To suit 42.4mm x 2mm tube)
To suit 42.4mm dia. tube.
Lo
c
69
62
Apply
adhesive
12
25
6
42
All measurements in (mm)
Lo
c
ki
ex
Lo
c
ki
n
ex
Lo
c
ki
n
ex
Tube mounted handrail support bracket with saddle.
Use adhesive to fix to the supporting tube.
ki
n
Lo
c
Lo
c
ki
n
ex
38
42.4
ne
x
ki
15
Page 3 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-515-42.4-SF (To suit 42.4mm x 2mm tube)
To suit 42.4mm dia. tube.
87
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
100
14
25
25
42.4mm
Dia.
62 42
ne
ex
x
Lo
ck
ki
in
ne
e
x
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
6
Lo
c
ki
Saddle height can be adjusted
by loosening grub screw and
lowering or raising the support
stem. Adjustment range is 85mm.
Minimum recommended
project for bottom of stem is
10mm.
An M8 threaded hole must be
created in the wall of the tube
in order to accept the M8 bolt
to make a fixing point.
M8 Grade 304 stainless
steel fixing bolt.
All measurements in (mm)
Handrail support bracket with adjustable support.
Drill supporting tube and thread hole to accept M8 bolt (Supplied)
Inox-518-42.4-SF (To suit 42.4mm x 2mm tube)
ne
x
39
ki
ex
ki
n
ex
ki
n
ex
42.4
All measurements in (mm)
Lo
c
Lo
c
Tube plug. Use soft hammer to fix into end of tube, apply adhesive if necessary.
Lo
c
ki
n
Lo
c
Lo
c
ki
n
ex L
oc
Lo
c
ki
n
Once the M8 threaded hole
has been created in the wall of the tube
and the M8 bolt has fixed the cap to the
tube, slide the main section over
the end of the cap and secure by
tightening the grub screw.
Page 4 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-521-42.4-SF (For tubular connections to suit 42.4mm x 2mm tube)
68
29
9mm Fixing hole
for connection to tube.
An M8 threaded hole must be created
in the wall of the tube in order to accept
the M8 bolt and make a fixing point. The
M8 fixing bolt will go through the
9mm fixing hole and screw into the tube.
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
45
6mm Diameter
pin with 8mm
diameter plastic
sleeve.
ne
ex
x
Lo
ck
ki
in
ne
e
x
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
ex
Recommended drilling
distance from edge of
glass is 28mm (Approx).
Recommended drill size is
approx. 9.5mm Dia.
Pin used to retain glass.
*Rubber gasket
(to suit 8mm, 10mm
or 12mm thick glass).
Lo
c
ki
42.4mm
Dia.
*Glass (8mm,10mm
or 12mm thick).
5mm Gap.
84
Inox-900 - For 8mm Glass
Inox-902 - For 10mm Glass
ki
n
Inox-904- For 12mm Glass
36
ne
x
ex
*Please specify glass thickness when ordering the glass clamp.
ex
ex
35
All measurements in (mm)
ki
Lo
c
ki
n
Lo
c
Lo
c
ki
n
Glass clamp with rubber gaskets and retaining safety pin.
The body of the clamp is mechanically fixed to the supporting structure.
Suitable for clamping, 8, 10 & 12mm thick glass (specify when ordering).
ki
n
Lo
c
Lo
c
ki
n
ex L
oc
Lo
c
Rubber gasket details.
Page 5 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-523-42.4-SF (For flat surface fixing)
62
29
9mm Fixing hole
for connection to tube.
An M8 threaded hole must be created
in the wall of the tube in order to accept
the M8 bolt and make a fixing point. The
M8 fixing bolt will go through the
9mm fixing hole and screw into the tube.
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
45
6mm Diameter
pin with 8mm
diameter plastic
sleeve.
ne
ne
x L
x
Lo
o
ck
ck
in
i
ne
e
x L
x
Lo
o
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
ex
Recommended drilling
distance from edge of
glass is 28mm (Approx).
Recommended drill size is
approx. 9.5mm Dia.
Lo
c
ki
Pin used to retain glass.
*Rubber gasket
(to suit 8mm, 10mm
or 12mm thick glass).
*Glass (8mm,10mm
or 12mm thick).
5mm Gap.
66
Inox-900 - For 8mm Glass
Inox-902 - For 10mm Glass
Inox-904- For 12mm Glass
Lo
c
ki
Rubber gasket details.
36
ne
x
ex
ex
ex
*Please specify glass thickness when ordering the glass clamp.
All measurements in (mm)
ki
Lo
c
ki
n
Lo
c
Lo
c
ki
n
Glass clamp with rubber gaskets and retaining safety pin.
The body of the clamp is mechanically fixed to the supporting structure.
Suitable for clamping, 8, 10 & 12mm thick glass (specify when ordering).
ki
n
Lo
c
Lo
c
ki
n
ex
35
Page 6 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-525-42.4-SF (To suit 42.4mm x 2mm tube)
Cover plate details
Base plate details
1.5 thick
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
42.6
28
90
85
All measurements in (mm)
Post base clamp with optional cover plate. (Order separate)
Inox-906-Cover Plate
Inox-527-42.4-SF (To suit 42.4mm x 2mm tube)
ne
ne
x L
x
Lo
oc
ck
k
in
i
n
e
e
x
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
100
Lo
c
ki
Apply
adhesive
All measurements in (mm)
Post base clamp. The upright tube requires 2 holes to be drilled to align with the existing
threaded screw holes in the clamp. Remove screws, slide the tube over the spigot. Insert
screws through aligned holes and tighten. As the screws contact the slot they expand
the spigot inside. Apply adhesive for added security.
Lo
c
ki
Inox-529-42.4-SF-100mm (To suit 42.4mm x 2mm tube)
ne
x
ex
ki
n
ex
All
Allmeasurements
measurementsinin(mm)
(mm)
ki
Lo
c
Lo
c
Post base clamp. The upright tube is welded to the underside of this bracket.
Optional cover plate available (order separately).
Lo
c
Lo
c
Lo
c
Inox-908-Cover Plate
ki
n
ex
ki
n
ki
n
ex
100 dia.
Page 7 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
TM
Inox-532-42.4-SF (To suit 42.4mm x 2mm tube)
150
Slots 20 x 13mm
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
100
All measurements in (mm)
Side mounted post base clamp.
Inox-535-42.4-SF (To suit 42.4mm x 2mm tube)
ki
Apply
adhesive
ne
x
Lo
ck
in
e
x
Lo
ck
in
180
Lo
c
122
Apply
adhesive
25
All measurements in (mm)
ne
e
x
x Lo
Lo
ck
ck
in
in
e
e
x
x Lo
Lo
ck
ck
in
in
In line handrail swivel connector. Use adhesive to fix to handrails.
Lo
c
ki
n
Inox-538-42.4-SF (To suit 42.4mm x 2mm tube)
Apply
adhesive
Apply
adhesive
All measurements in (mm)
Lo
c
ki
In line handrail connector. Use adhesive to fix to hand rails.
Page 8 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-541-42.4-SF (To suit 42.4mm x 2mm tube)
42.4
38
50
25
Apply
adhesive
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
50
Apply
adhesive
All measurements in (mm)
90 Degree handrail connector. Use adhesive to fix to handrails.
ne
ne
x L
x
Lo
o
ck
ck
in
i
ne
e
x L
x
Lo
o
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
ex
Inox-544-42.4-SF (To suit 42.4mm x 2mm tube)
Apply
adhesive
ki
Apply
adhesive
Lo
c
Apply
adhesive
All measurements in (mm)
“T” handrail connector. Use adhesive to fix to handrails.
ki
Inox-547-42.4-SF (To suit 42.4mm x 2mm tube)
ne
x
ex
ki
n
ex
ki
n
ex
ki
n
All measurements in (mm)
ki
Lo
c
Lo
c
In line handrail connector. Comprises of two parts. Twist to offset required.
A bolt is used to secure the two parts through the connection point. Bolt can simply be
loosened when a different offset is required and re-tightened.
Lo
c
Lo
c
Lo
c
ki
n
ex
Lo
c
Connection point.
Page 9 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-550-42.4-SF (To suit 42.4mm x 2mm tube)
Apply
adhesive
Apply
adhesive
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Apply
adhesive
Apply
adhesive
All measurements in (mm)
Four Way handrail connector.
Use adhesive to fix to tubes.
ne
ne
x L
x
Lo
o
ck
ck
in
i
ne
e
x L
x
Lo
o
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
ex
Inox-553-42.4-SF (To suit 42.4mm x 2mm tube)
50
Lo
c
ki
50
Apply
adhesive
25
Apply
adhesive
Apply
adhesive
Connection point.
All measurements in (mm)
Three Way handrail connector.
Use adhesive to fix to the tube.
Glue and insert
straight
connector.
(Order separate)
Drill & Thread
tube wall.
ne
x
ex
Offer up
fitting and
connect using
bolt supplied.
ki
n
ex
Glue and connect
required length
of tube.
(Order separate)
ki
n
ex
ki
n
All measurements in (mm)
ki
Lo
c
Lo
c
Spigot tube attachment. Mechanically fixed to a tube at 90 degrees.
Using a straight connector (Inox-538.42.4-SF), insert & glue into the open end.
Slide over & glue tube to the straight connector.
Lo
c
Lo
c
Lo
c
ki
n
ex
Lo
c
ki
Inox-555-42.4-SF
(To suit 42.4mm x 2mm
tube)
Page 10 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com
Lockinex
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
TM
Inox-800-42.4-SF
Satin finish.
Stainless steel grade 304 - 42.4 mm Dimater and 2mm wall thickness.
Lo
ck
in
e
x
Lo
ck
in
e
x
Lo
ck
in
ex
Lo
ck
in
ex
Lo
ck
in
ex
Supplied in 6 mtr lengths
All measurements in (mm)
Stainless steel tube.
ne
ex
x
Lo
ck
ki
in
ne
e
x
x
Lo
Lo
ck
ck
in
i
n
ex
e
x
Lo
Lo
ck
ck
in
i
ne
ex
x
Lo
Lo
ck
ck
in
i
n
ex
ex
Inox-700-Adhesive
ki
50 ml High strength adhesive.
Lo
c
Wear suitable PPE when using this product.
1
2
3
4
5
ki
ne
x
View of completed joint.
Lo
c
ki
n
Lo
c
ki
n
Apply adhesive
to leading edge of fitting.
Insert fitting.
Rotate half turn
once left, once right.
ex
Connector inserted
into one tube end.
Lo
c
ki
n
ex
Apply adhesive
to leading edge of fitting.
Insert fitting.
Rotate half turn
once left, once right.
Lo
c
Lo
c
ki
n
Straight tube
connector shown
for demonstration
purposes.
ex
ex L
oc
Lo
c
ki
n
Quick drying, high temperature resistant adhesive and sealant.
Page 11 of 11 (Lockinex Stainless) 02/14
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW
Tel: 01323 737 626 Email: Sales@lockinex.com
Web: www.lockinex-store.com

Similar documents