here - Resource Recovery Systems, Inc.

Transcription

elcome to the Wood Beaver
Forestry Equipment Catalog
™
Thank you for taking the time to inquire about the WOOD BEAVER Forestry Products.
Resource Recovery Systems has been with the forestry industry for over 15 years, servicing
& selling all types of forestry equipment. We are the North American Distributor for the
Finland based forestry equipment manufacturer, Maaselän Kone Oy.
We are excited to introduce the Hakki Pilke “Wood Beaver” Forest machinery equipment line.
We looked for a unit that was small, affordable, well built and versatile all in one processor
and we found it with the Wood Beaver Firewood Processors. The processors are manufactured in Finland and the manufacture produces over 3500 units a year and are by far the
largest manufacture of Firewood Processors in the world.
There are a variety of models to fit everyone’s need. From hydraulic splitters to chainsaw or
circular saw operated cutting models. All models are PTO driven, but can be upgraded to a
19hp diesel or 24hp gas motor. They have the fastest splitting time on the market, only 2.8
seconds!
Our best selling unit is the 1X37, an all in one in-feed, saw, splitter and conveyor. We entered this machine at the 2007 Sawmill & Woodlot Firewood Processing Competition in
South Carolina. The 1X37 processed 2.375 full cords in 18 min. 10 sec. (7.84 cords/hr) with
a setup time of 1 min. 20 sec. and a tear-down time of 54.4 sec. Proving to be the fastest
and most affordable processor on the market!
The Resource Recovery sales team is always there ready to help, whether its with information before the sale and during the sale or support after the sale with warranty or technical
questions.
Enclosed are a pricing sheet and a DVD. You can also view the machines on the web at
WOODBEAVER.NET. We look forward to serving you, and answering any questions you may
have, 1-800-569-6813 or E-mail: sales@rrsinc.net.
Regards,
Resource Recovery Systems, Inc.
Scott, Jeni, Mark, Mike, Larry, Becky, Kari and Mike.
2
THE FIREWOOD
FACTORY
WITHIN MINUTES OF ARRIVING
ON SITE
THE MACHINE IS READY FOR
OPERATION
Three easy to operate hydraulic control levers control the:
- infeed and cross of the
wood.
- the height adjustment of the
splitting blade.
- the raising and lowering and
side shift of the discharge
conveyor.
The infeed conveyor is raised
and lowered using a self locking hand winch.
Logs, to measure:
Precise optical
measuring of the log
length.
The hydraulic actuated clamp
roll keeps the log firmly on
the cross cut deck.
TECHNICAL SPECIFICATIONS:
Saw Bar:
Power Demand:
Optional 12 way wedge
The discharge conveyor folds
and shifts hydraulically both
vertical and horizontally.
Radial stacking
conveyor. The
discharge conveyor
is moved hydraulically through an arc
of 7’2”.
20” (404)
40+ PTO HP / 15KW
540 PTO
Output bulk/hour:
2-3+ cords/hour
Splitting Blade (Standard) 8-Way splitting blade
Optional 4, 6, 8 & 12 Way Wedge
Max diameter of logs: 18.5"
Hydraulic pressure:
2500 PSI
Volume of oil tank:
33 gallon – oil included as
Standard
Length of conveyor in work position: 13’
Length of infeed conveyor:
8’ 5”
*Hydraulic Radial Stacking Conveyor
Weight:
3500 lbs.
Optional Equipment:
- Hydraulic Log-lifter
- Hydraulic Log-stand
- Hydraulic operated infeed deck
- Optional Multispeed
3
Cutting:
Positive mechanical power transfer.
Cutting chain can be stopped at any
time.
Splitting:
Green Speed splitting system Technology for high productivity
with minimum power regardless of log
diameter.
Service points are
Inclined feed
Spring loaded
conveniently
conveyor holds the
pressure wheel holds
accessible under pro- log in the right place. the log in place.
tective covers.
Safety:
Protective covers (splitting and
cutting) must be closed for the machine to work. Opening the covers
will stop the machine.
Splitting axe with
last release - axe can
be changed
rapidly.
The length measuring
stopper moves providing a
smooth cut and allowing
the piece to fall neatly into
the chute.
Saw Bar:
Power Demand:
Conveyor belt is run
by a hydraulic motor at the top of the
conveyor, which the
speed is adjusted on
the control panel.
The splitting channel has a grid underneath which
allows the split
firewood to stay
clean of splinters
and waste wood.
Radial stacking
conveyor.
4
18” (3/8”, 68 links)
20 HP / 10 kW
540 PTO
Output bulk/hour:
1-2 full cords/hour (based on 128 cu ft.)
2 and 4 way Splitting Blade included as Standard
Optional:
6 & 8 Way Wedge
Max diameter of logs:
17.5"
Splitting Force:
8,378 to 29,101 lbs
Hydraulic pressure:
2800 PSI
Volume of oil tank:
17 gallon –oil included as Standard
Length of feed conveyor:
7’ 2”
Weight:
2,348 lbs.
Optional Equipment:
- Hydraulic adjustable splitting blade
- Portable power pack
Cutting:
Splitting:
Positive mechanical power transfer. Splitting executed by two splitting units. Maximum
Cutting chain can be stopped at any production regardless of the size of the wood has been
time.
achieved by using the power and speed transformer.
Safety:
Protective covers (splitting and
cutting) must be closed for the
machine to work. Opening the
covers will stop the machine.
Inclined feed
conveyor holds the
log in the right
place.
Service points are
conveniently
accessible under protective covers.
The length measuring stopper moves
providing a smooth
cut and allowing
The piece to fall
neatly into the chute.
Spring loaded
pressure wheel
holds the log in
place.
Saw Bar:
Power Demand:
Conveyor belt is run
by a hydraulic motor at the top of the
conveyor, which the
speed is adjusted on
the control panel.
The splitting channel has a grid underneath which
allows the split
firewood to stay
clean of splinters
and waste wood.
16” (.325” , 66 links)
20 HP / 10 kW
540 PTO
Output bulk/hour:
1-2 Full cords/hour (based on 128 cu ft.)
2 and 4 way Splitting Blade included as Standard
Optional:
6 Way Wedge
15.5”
Splitting Force:
12,787 and 21,164 lbs
Hydraulic pressure:
2800 PSI
Volume of oil tank:
17 gallon –oil included as Standard
7’ 2”
Weight:
2,348 lbs.
Dual Splitting Axes
can be changed rap- Optional Equipment:
idly.
5
Firewood
Faster, Safer, Easier
Wood Beaver 1X Easy All functions of the machine
are operated hydraulically:
log feed, cross-cutting and
height adjustment of the
splitting blade.
Infeed Conveyor:
The Feed Conveyor carries the log
into the machine. The log infeed
can be stopped and reversed. Foot
operated splitting for the last piece
of log.
Adjustable Folding Discharge
Conveyor:
The 13’ conveyor folds easily for
transport. Conveyor height is adjusted with a hand operated selflocking winch.
Interchangeable Wedge
Standard wedge the wood
can be split into 2 or 4 pieces. A 6 way wedge is an
option.
6
During cutting the
measuring disc deflects, enabling the log
to drop down
unobstructed.
Maintenance:
The sawbar cover is opened
using a wrench. This
allows easy access for
maintenance.
Saw Bar:
Power Demand:
16”
15 HP / 7.5 KW
540 PTO
Output bulk/hour:
1-2+ cords/hour
2 & 4 way Splitting Blade (Standard)
Optional:
6 Way Wedge
15.5"
Splitting force:
7.0 Ton
Hydraulic pressure:
2600 PSI
Flow of hydraulic pump:
11.6 GPM
Volume of oil tank:
10.5 gallon –oil
included as standard
7’ 2”
Weight:
1500 lbs.
Optional Equipment:
- Portable Power pack
Circular saw cutting and hydraulic splitting. A machine with
its own hydraulics, using a tractor engine or an optional
electric engine as a power source. Logs can be slit into 2, 4
or 6 pieces and removing the cutting blade the small logs
can be cut into desired lengths. Cutting with a circular saw.
Firewood production
made easy!
Equipped with PTO shaft and 3mm Loading Conveyor.
Crosscut table:
Measurement:
Emergency stop:
Ergonomically correct, balanced crosscut table is fitted
with contoured log support rollers.
Log length can be measured
quickly and easily and pre-set to
the desired length. The log stop
deflects as the log is cut, allowing the wood to fall unobstructed
into the splitting chute.
In an emergency, all functions of
the machine can be stopped using a foot operated pedal.
Circular Saw:
Power Demand:
Splitting Mechanism:
As the log drops into the
splitting chute it activates the
splitting mechanism.
When not in use, the conveyor is folded and locked
in the vertical
position. The machine is
now compact for easy
transport and storage.
27.5” (700 mm)
15-25 PTO, HP / 7.5KW
540 PTO
Output bulk/hour:
1 + cords/hour
Splitting Blade (Standard) A blade that splits into
2 or 4 pieces
11.8"
Hydraulic pressure:
2600 PSI
Flow of hydraulic pump:
11.6 GPM
Volume of oil tank:
10.5 gallon –oil
included as Standard
Length of conveyor in work position: 10.5’
7’ 2”
* Includes Hakki Conveyor
Weight:
1000 lbs.
Optional Equipment:
- Log Rack
-Blades: Tungsten Carbide Tipped Blade
Standard Blade - Hardened Steel
7
NEW! Hydraulic sawbar, hydraulic discharge
conveyor and hydraulic splitting.
Compact size makes it easy to move and transport. Hawk is available with a combustion engine (Honda), tractor drive or electric drive.
Transportation:
Compact size Easy transport Fast
into operating condition
6-way blade:
A 6-way blade produces firewood in an instant.
Discharge:
Hydraulic Sawbar.
Hydraulic discharge conveyor
Sawbar:
Power Demand:
13”
540 PTO / 15 PTO HP or
13 HP Gas Honda
Output bulk/hour:
1 + cords/hour
Splitting Blade (Standard) A blade that splits into 2 & 4 pieces
Optional:
6 Way Wedge
11.5"
Hydraulic Pressure:
2900 PSI
6’
* Includes Hakki Conveyor
Weight:
1000 lbs.
8
The traditional way of wood splitting. Cut the log with the
circular saw and use the splitting cone to split it.
Powered by tractor engine, electric drive or combustion
engine.
HAKKI PILKE eagle for large and small logs. It is easy to
use & transport.
Emergency stop in accordance
with CE safety regulations. Stops
in 5 seconds.
Ergonomically correct splitting
rack for small and large logs.
6.5 horsepower combustion
engine
4 KW electric drive.
Circular Saw:
Power Demand:
27.5”
540 PTO or
6.5 HP Gas Honda
Output bulk/hour:
1 cords / hour
Splitting Blade (Standard) A splitting screw with
changeable tip
11.5"
Weight:
400 lbs.
Options:
6.5 hp Gas Honda
9
100
A solution for splitting large logs.
Instant adjustment of the height of the splitting
blade enables splitting into two or four pieces.
The length of the splitting motion is adjustable
according to the length of the log.
Splitting with just one motion and without
splinters.
Adjustment of the splitting
blade
Splitting Blade:
The height of the splitting blade
can be easily adjusted (four-way
splitting is possible) The splitting
action can be steplessly adjusted
according to the length of the log.
10
Easy to control:
No splinters:
Pull the levers together and the
splitting starts. Returns back into
starting position automatically.
With a single splitting motion the
log is halved splinterlessly.
Hydraulics required:
Required oil flow and oil pressure:
Splitting cylinder diameter:
Adjustable Splitting Length from 10” to 42”
Single function
5.28 gal/min, 2610 PSI
70mm/ 2.75 in
Triple your profits with a
Wood Beaver™
Firewood Bundler
The Wood Beaver Firewood Wrapper System is designed to quickly
stretch-wrap bundles of firewood. These machines are
designed to wrap firewood from 12” to 24” long.
The tension spring clutch adjusts how tight the wrap stretches. The proper
tensioning of the clutch spring nearly doubles the length of the wrap. This
produces a clean, economical, self-tightening bundle easily stored & carried. Open ended bundles allow the wood to dry in storage.
Beaver Wrapper is fast, 12 to
15 sec actual wrap time plus
loading & unloading. Rates of
75 bundles and up an hour are
common for a single operator
on unit.
Hold the wrap across the
top of the wood bundle and
step on the peddle and you
are ready to go.
- Four drop thru baskets included. (Have one person filling the baskets while the other is wrapping!
- Equipped with ¼ HP (40 rpm) electric motor. HD gear reduction.
- ONLY available in 3/4” Cubic ft.
- 1-12” roll of 80 gauge wrap included & sample of handles.
- Portable mounted on 8” wheels and rolls like a two wheeler.
Width 37”, Depth 40”, Height 53”, Weight 230 lbs.
Model: Quick-Load
(F.O.B. Hartford WI)
Units can be custom built to fit your needs - CALL FOR PRICING.
Optional sizes will be quoted.
$1995.00
The Wood Beaver
Twister wrapper
makes it easy to
personalize your
product for pricing
and company
recognition.
Profit calculator for the Wood Beaver Twister Firewood Bundler
Wood packages described below are based on a .75 cubic foot bundle
170 packages per cord (each cord based on a 4' x 4' x 8' full cord) 128 cu ft
If you sell your cordwood at
$150 per cord you will get $15,000 for every 100 cords of wood sold
If you sell your packages at
Packages @ $2.00 per = $340.00 per cord or $20,000 for 100 cords
11
A 12” 1500 ft roll will wrap approximately 200 12”-13” diameter bundles with 3 turns or
150 bundles with 4 turns of wrap.
Also available for purchase: Web nylon handles
Advantages of a Wood Beaver Twister Firewood Bundle
Owning a Beaver Wrapper overcomes the problems of customers overloading bushel baskets, wheelbarrows or single
armloads.
ü
The Owner determines the size of the bundle.
ü
Wrapping with a Beaver Wrapper is faster than bagging.
ü
Wrapping with a Beaver Wrapper is faster and cleaner than tying with string.
ü
Stretch wrapping holds wood securely during handling due to its elasticity.
ü
Open-ended bundles allow the wood to dry in storage.
ü
115-volt ¼ horsepower gear motor drive.
ü
2-3 year limited Motor warranty.
ü
Can be used at remote locations with a generator.
7 most profitable & popular income plans:
ü
ü
ü
ü
ü
ü
ü
On site packaging at customer's location.
Sell packaged wood to local retail outlets.
Sell to mass merchandisers.
Shrink wrap other products.
Sell for home heating use.
Machine rental to others.
Sell to campgrounds.
Increase your speed & efficiency with a
custom turn table!
Call for pricing!
Units are palletized and shipped
regular truck freight
from Hartford, WI.
SOME ASSEMBLY REQUIRED
CALL WITH ANY QUESTIONS
1-800-569-6813
This is a great unit for minimal cost.
www.woodbeaver.net
™
12
Credit Cards ACCEPTED
VISA / MASTER CARD
Available Options
Choose from many different options to add
to your Wood Beaver Firewood Processor.
™
Wedges
1X37 Hydraulic Log Lifter
A blade for splitting logs into 6 parts.
The blade will be installed into a firewood processor instead of the standard 4-way splitting blade. The
picture shows a 1X37 6-way blade.
The wood lifting device lowers hydraulically down to the ground,
so you can easily roll the tree trunks on
to it and lift them conveniently on to
the infeed conveyor.
“Z”Wedges
2-way wedge - std
4-way wedge - std
1X37 wedges
2-way wedge - std
4-way wedge - std
6-way wedge - opt
Green Speed wedges
6-way wedge
8-way wedge
12-way wedge
60 oh wedges
4-way wedge - std
6-way wedge - opt
1X37 Log rack
Available in Manual & Hydraulic
A log rack that can be easily filled
from a loader. Just as easily you can
move the trunks onto the infeed
conveyor.
Hydraulic Feeding Table
-Live Deck
Fits BigX47, 1X37, and Green Speed
Models.
Hydraulic feeding table 2 m. Strong
link chains transfer the logs to the sorting mechanism by means of which the
logs are transferred to the toothed
transfer rollers. The rollers and the infeed conveyor of the machine transfer
the tree for cutting. The deck is controlled from the machine.
Extension for Hydraulic
Feeding Table
Add an additional 9.8 ft to your
feeding table.
Big X wedges
6-way wedge - opt
8-way wedge - std.
12-way wedge - opt.
60 oh Blades
-Tungsten Carbide Tipped Blade 27.5”
-Standard Blade 27.5” - Hardended Steel
1X37 Infeed Extension
Standard and Easy Models
Add an additional 3 feet to
your 1X37.
Sacking rack
Net sack
Sacking rack or support frame,
where you can drop firewood directly from the conveyor. Holds 1.1
Metric yards. (just under 1 face
cord)
Sold in packs of 50 or 100
Net sacks for firewood make
handling easier and speed up
drying. Holds 1.1 Metric yards.
(just under 1 face cord)
13
Portable Power Take-off
and Hydraulic Units
™
These units don’t only save you time, they save you money.
Uses
*Run Wood Beaver firewood processors
*Operate PTO elevators
Hydraulic Models
*Operate log splitters
*Operate hydraulic elevators
*And many other hydraulic and PTO powered equipment
Model 24-HD ELH - PTO Only “The Beaver”
Hard working unit with the power to run the 1X37 and lower models or other equipment requiring
more PTO horsepower. Approx. 325 lbs.
Model D-19-HD PTO Only
Heavy duty diesel unit. More
powerful and less expensive to run and maintain than a gas model.
Lombardini Air cooled/diesel, 3600 rpm
Approx. Dry weight: 325lbs.
PTO Adjustable Height Stand
Adjusts from 15” - 24”
Special orders please give 4 to 6 weeks processing time.
Optional Accessories:
* Light kit * Tach/proofmeter * 12V remote electric solenoid valve
Model # (indicates
horsepower)
Low RPM Full
Throttle
High RPM Full
Throttle
Starting System
Main
Frame
Width
Gallons
Per Minute
PSI
24 -HD ELH PTO
only
520
7.5:1
reduction
600
6.5:1
reduction
Electric
58”
N/A
N/A
D-19-HD
540
600
Electric
14
Price
Call for pricing
58”
N/A
N/A
Call for pricing
1-800-569-6813
www.woodbeaver.net
Hartford, Wisconsin 53027
Dealers wanted! Inquire by sending an e-mail to
sales@rrsinc.net or call Scott @ 1-800-569-6813
Financing made easy!
Resource Recovery Systems works with you to accommodate your finance needs.
We work closely with leasing companies from purchase start to finish.
* Save time and conserve your working capital
* Minimal down payment
* Flexible terms
* Prompt dependable service
P.O. Box 97
Ada, MI 49301-0097
800-589-3336
www.nelinc.com
Zach Doohen
101 N Main Ave
Suite 215
Sioux Falls, SD 57104
1- 866-769-2345
1- 605-271-7133 Fax
zach@yourcapitalpartner.com
www.yourcapitalpartner.com
Steve or Jeff
19 N. Pearl Street
Suite 2
Covington, OH 45318
800-347-4977
Terry Marc
2912 Pioneer
Rice Lake, WI 54868
1-866-885-1875
tmarc@agstar.com
Warranty:
All units come with a one (1) year warranty on parts.
Call 1-800-569-6813
for Service or Warranty issues.
Parts & Service:
We service and carry parts on all models we sell.
15
™
Distributor:
P.O. Box 270179, 1117 Western Drive
Hartford, WI 53027
1-800-569-6813
www.woodbeaver.net
Dealer:
Bundler Picture
here

here - Resource Recovery Systems, Inc.

Transcription

Similar documents

Palax Power100S Firewood Processor

Haul Master - Prairie Sky Equipment Ltd.

compact wheel loaders

Poclain low

The GOMACO Full Line Brochure

AHC Product Line - The Packaging Guide

MODEL 3040XP2 FIREWOOD PROCESSOR

Customised hydraulic systems

2014 UTV/ATV PLOWS

MODEL 2040XP2 FIREWOOD PROCESSOR