PB1028539 - Hutchinson Mayrath

Transcription

8” & 10” SWING AWAY
PORTABLE AUGER
GEAR DRIVE MODEL
PARTS BOOK
Effective May 21 ,2012
Publication No. PB1028539
THIS PARTS BOOK IS FOR ALL OF THE 8” & 10” SWING AWAY PORTABLE AUGER
GEAR DRIVE MODEL STARTING AT DATE OCTOBER 14, 2005 AND
SERIAL NUMBER 914303 TO PRESENT
***FOR INTERNAL USE ONLY***
P.O. Box 629 514 W. Crawford Clay Center, KS 67432
Phone 785-632-2161 1-800-523-6993 FAX 785-632-5964
POLICIES AND PROCEDURES
PRICES:
Prices in effect at time of shipment will apply. Prices are subject to change without notice. All prices are
F.O.B. Clay Center, Kansas. Orders shipped from locations other than Clay Center, Kansas will be subject
to additional charges, such as back freight and/or additional freight.
SERVICE
CHARGE:
A service charge will be assessed on all past due balances as permitted by state law not to exceed 1-1/2%
per month.
MIINMUM
ORDER:
BACK
ORDERS:
Processing and handling costs necessitate a minimum charge of $15.00 net on all orders.
DAMAGED
GOODS:
It is the consignee’s responsibility to check all shipments thoroughly upon receipt of goods. If any damage
is discovered, it must be noted on the freight bill of lading before signing. The consignee must make
necessary claims against the respective freight line. All damage claims must be submitted within 30 days
of delivery receipt.
SHORTAGES:
All shortages must be noted at time of delivery receipt. Shortages must be noted on the freight bill of lading
Back orders will be shipped as they become available. Contact Hutchinson/Mayrath Customer Service for
alternative shipping options or if cancellation is desired.
before signing. Hutchinson/Mayrath must be advised of all concealed shortages upon discovery. Once
notified of concealed shortages Hutchinson/Mayrath will advise corrective action to be taken.
RETURN OF
GOODS:
All returns must be approved by Hutchinson/Mayrath prior to shipment. All return requests will be issued a
return authorization number. NO RETURNS WILL BE ACCEPTED WITHOUT A RETURN AUTHORIZATION
NUMBER AND PRIOR AUTHORIZATION FROM THE FACTORY. All returns must be shipped prepaid. A 15%
restocking charge will be applied to all returned merchandise. Custom products may not be returned for
credit. Only current products in new and saleable condition may be returned. No safety devices may be
returned for credit.
MODIFICATIONS:
It is the policy of Hutchinson/Mayrath to improve its product whenever possible and practical to do so. We
reserve the right to make changes, improvements and modifications at any time without incurring the obligation
to make such changes, improvements and modifications on any equipment sold previously.
LIMITED
WARRANTY:
(a) For a period of (1) year after receipt of goods by the original consumer buyer, Hutchinson/Mayrath will
supply free of charge replacement parts for parts that prove defective in workmanship or material. Defective
parts must be returned freights prepaid to a specified Hutchinson/Mayrath location. Only Hutchinson/Mayrath
original repair parts may be used for warranty repairs.
(b) This limited warranty does not extend to parts designed to wear in normal operation and be replaced
periodically, or to damage caused by negligence, accident, abuse or improper installation or operation.
(c) GOODS NOT MANUFACTURED BY HUTCHINSON/MAYRATH CARRY ONLY THE MANUFACTURER’S
WARRANTY.
(d) THIS UNDERTAKING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE OWNER’S & OPERATOR’S MANUALS AND
THE ITEMS LISTED BELOW WILL RESULT IN THE VOIDING OF THIS LIMITED WARRANTY.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
LIMITATION
OF LIABILITY:
Improper assembly, including failure to properly install all safety equipment.
Improper installation (power & wiring included)
Unauthorized alterations of goods.
Goods operated when obviously in need of repair.
Use of unauthorized repair parts.
Irresponsible operation.
Used to handle materials other than free flowing, non-abrasive and dry materials, as intended.
Damaged through abusive use or accident.
BUYER AGREES THAT IN NO EVENT SHALL HUTCHINSON/MAYRATH HAVE LIABILITY FOR DIRECT
DAMAGES IN EXCESS OF THE CONTRACT PRICE OF THE GOODS IN RESPECT TO WHICH CLAIM IS
MADE. BUYER FURTHER AGREES THAT IN NO EVENT SHALL HUTCHINSON/MAYRATH ON ANY CLAIM OF
ANY KIND HAVE LIABILITY FOR LOSS OF USE, LOSS OF PROFITS, OR FOR ANY INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
PARTS LIST
Page PB- 0
The first edition of the Parts Book was released 5- 2012
NOTE: Serial number or date ranges applicable to each model or model variation are given.
Equipment with serial numbers or dates nearing the beginning or ending numbers or dates
may include components from and earlier or later model or model variation. Carefully examine the auger and the parts list to identify the correct parts.
05-2012
PB 1028539-PB 0
Page PB- 1
PARTS LIST
SAFETY SIGNS AND DECALS
AUGER COMPONENTS
SN 914303 to PRESENT
10” x 62’ SWING-AWAY AUGER
(Shown)
03527A1
05-2012
PB 1028539-PB 1
PARTS LIST
Page PB- 2
(Refer to pages PB-3 thru PB-7)
REF.
NO.
1
PART
NO.
1001973
QTY.
1
2
1001980
1
3
1001974
1
4
1004460
1
5
1001981
1
6
1001985
1
7
1001987
Vary
8
1001984
1
9
1001926
1
10
1001983
1
11
1001986
1
12
1005324
1
13
1001975
1
14
1001976
2
15
13-10021
1
16
13-10022
1
17
18
1004461
1005362
1
1
19
1013783
1
20
1013531
1
21
1022104
1
--
1021179
4
--
1021180
--
--
1022181
3
05-2012
DESCRIPTION
SIZE
CAUTION - GENERAL STATEMENTS 1-8
4-3/4" x 8"
(On Main Auger Housing)
DANGER - BEWARE OF POWER LINES
4" x 8"
WARNING - ESCAPING HYDRAULIC OIL
4" x 7-1/2"
CAUTION - ROTATING WINCH HANDLE
4" x 7-3/8"
(One on side of Inlet Hopper)
DANGER - UPENDING HAZARD
4-1/2" x 6-1/4"
DANGER - ROTATING AUGER
4-1/2" x 6-1/4"
(On Incline Tube)
DANGER - DO NOT OPERATE WITH COVER OPEN!
4" x 5-1/2"
(One on Inlet Hopper Clean-out Door)
(One on side of Incline Tube Spout)
DANGER - DO NOT ATTEMPT DISASSEMBLY
4" x 6"
DANGER - CYLINDER STATEMENT
4" x 8"
(One on side of Hydraulic Cylinder)
DANGER - ROTATING DRIVELINE
4" x 6-1/4"
(One on back of Inlet Hopper)
DANGER - ROTATING AUGER INSIDE OF HOPPER
4" x 5-1/2"
DANGER - “ STOP”, IF ANY GUARDS, SHIELDS...
4" x 6"
WARNING - THE TRANSPORT WIDTH
4" x 6"
(On 62’ and 72’ Models Only)
WARNING - PINCH POINT
4" x 5-1/2"
(One on both sides of Undercarriage Frame)
3-3/8" x 5"
(One on PTO Driveline Shield)
DANGER - SHIELD MISSING
2-1/2" x 8-7/8"
(Under PTO Driveline Shield)
OPERATOR’S MANUAL INSIDE
1-1/2" x 7-1/2"
BEFORE TRANSPORTING
2" x 5-1/2"
(On Lift Arm)
NOTICE - DO NOT ATTACH PTO
5-1/4" x 7"
(On back of Inlet Hopper)
GREASE
1" x 2"
WARNING - WINCH OPERATION
3/4" x 7"
(On Winch Handle)
RED REFLECTIVE DECAL
2" x 9"
(On back of Axle and back of Upper Undercarriage Attachment)
YELLOW REFLECTIVE DECAL
2" x 9"
10 on 62’ Models, 12 On 72’ Models & 14 On 82’ Models
(Along sides of auger housing and undercarriage,
on forward facing brackets attached to undercarriage)
ORANGE FLOURESCENT DECAL
2" x 9"
(On back of axle)
PB 1028539-PB 2
Page PB- 3
PARTS LIST
Check all safety signs and replace any that are worn, missing or
illegible. The safety sign locations are shown below. Copies of
the Safety Signs are shown on this page and the next two
pages. Safety signs may be obtained from you dealer or oredered
from the factory.
02632A1-N1
05-2012
02612A1-A
PB 1028539-PB 3
PARTS LIST
Page PB- 4
As
REF. PART
PART
REF.
NO. NO.
NO.
NO.
1001973
11
1001973
As
QTY.
QTY.
11
As
22
1001980
1001980
11
33
1001974
1001974
11
44
1004460
1004460
11
55
1001981
1001981
11
66
1001985
1001985
11
77
1001987
1001987
Vary
Vary
88
1001984
1001984
11
99
1001926
1001926
11
DESCRIPTION
DESCRIPTION
CAUTION
- GENERAL
STATEMENTS
1-8
CAUTION
- GENERAL
STATEMENTS
1-8
(On
Main
Auger
Housing)
DANGER
- BEWARE
OF
POWER
LINES
DANGER
- BEWARE
OF
POWER
LINES
(OnMain
MainAuger
AugerHousing)
Housing)
(On
WARNING
- ESCAPING
HYDRAULIC
OIL
WARNING
- ESCAPING
HYDRAULIC
OIL
(OnMain
MainAuger
AugerHousing)
Housing)
(On
CAUTION
- ROTATING
WINCH
HANDLE
CAUTION
- ROTATING
WINCH
HANDLE
(Oneononside
sideofofInlet
InletHopper)
Hopper)
(One
DANGER
- UPENDING
HAZARD
DANGER
- UPENDING
HAZARD
(OnMain
MainAuger
AugerHousing)
Housing)
(On
DANGER
- ROTATING
AUGER
DANGER
- ROTATING
AUGER
(OnIncline
InclineTube)
Tube)
(On
DANGER
- DO
NOT
OPERATE
WITH
COVER
OPEN!
DANGER
- DO
NOT
OPERATE
WITH
COVER
OPEN!
(Oneononside
sideofofInlet
InletHopper)
Hopper)
(One
(OneononInlet
InletHopper
HopperClean-out
Clean-outDoor)
Door)
(One
(One
on
side
of
Incline
Tube
Spout)
(One on side of Incline Tube Spout)
DANGER
- DO
NOT
ATTEMPT
DISASSEMBLY
DANGER
- DO
NOT
ATTEMPT
DISASSEMBLY
(OnMain
MainAuger
AugerHousing)
Housing)
(On
DANGER
- CYLINDER
STATEMENT
DANGER
- CYLINDER
STATEMENT
(Oneononside
sideofofHydraulic
HydraulicCylinder)
Cylinder)
(One
SIZE
SIZE
4-3/4"
x 8"
4-3/4"
x 8"
x 8"
4"4"
x 8"
x 7-1/2"
4"4"
x 7-1/2"
x 7-3/8"
4"4"
x 7-3/8"
4-1/2"
x 6-1/4"
4-1/2"
x 6-1/4"
4-1/2"
x 6-1/4"
4-1/2"
x 6-1/4"
x 5-1/2"
4"4"
x 5-1/2"
x 6"
4"4"
x 6"
x 8"
4"4"
x 8"
02612A2-B
05-2012
PB 1028539-PB 4
Page PB- 5
PARTS LIST
from
the factory.
02632A1-N1
05-2012
02612A2-B
02612A4-G1
PB 1028539-PB 5
PARTS LIST
Page PB- 6
REF. PART
NO. NO.
QTY.
10
1001983
1
11
1001986
1
12
1005324
1
13
1001975
1
14
1001976
2
15
13-10021
1
16
13-10022
1
17
1004461
1
DESCRIPTION
(One on back of Inlet Hopper)
DANGER - ROTATING AUGER INSIDE OF HOPPER
DANGER - “ STOP”, IF ANY GUARDS, SHIELDS...
WARNING - THE TRANSPORT WIDTH
(On 62’ and 72’ Models Only)
WARNING - PINCH POINT
(One on both sides of Undercarriage Frame)
(One on PTO Driveline Shield)
DANGER - SHIELD MISSING
(Under PTO Driveline Shield)
OPERATOR’S MANUAL INSIDE
SIZE
4" x 6-1/4"
4" x 5-1/2"
4" x 6"
4" x 6"
4" x 5-1/2"
3-3/8" x 5"
2-1/2" x 8-7/8"
1-1/2" x 7-1/2"
02612A4-G1
05-2012
PB 1028539-PB 6
PARTS LIST
Page PB- 7
from the factory.
REF.
NO.
18
PART
NO.
1005362
QTY.
1
19
1013783
1
20
1013531
1
21
1022104
1
--
1021179
4
--
1021180
--
--
1022181
3
DESCRIPTION
SIZE
BEFORE TRANSPORTING
2" x 5-1/2"
(On Lift Arm)
NOTICE - DO NOT ATTACH PTO
5-1/4" x 7"
GREASE
1" x 2"
WARNING - WINCH OPERATION
3/4" x 7"
(On Winch Handle)
RED REFLECTIVE DECAL
2" x 9"
(On back of Axle and back of Upper Undercarriage Attachment)
YELLOW REFLECTIVE DECAL
2" x 9"
10 on 62’ Models, 12 On 72’ Models & 14 On 82’ Models
(Along sides of auger housing and undercarriage,
on forward facing brackets attached to undercarriage)
ORANGE FLOURESCENT DECAL
2" x 9"
(On back of axle)
02632A1-N1
05-2012
02612A4-G1
PB 1028539-PB 7
PARTS LIST
Page PB- 8
THIS PAGE WAS LEFT BLANK
05-2012
PB 1028539-PB 8
PARTS LIST
Page PB- 9
MAIN AUGER COMPONENTS 8” SWING AWAY
(Refer to Pages PB-9 thru PB-14)
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB 9
PARTS LIST
Page PB- 10
REF.
NO.
PART
NO.
DESCRIPTION
Truss Side (32" long)
11
866015-1
5/8" Dia.x 11" Eyebolt
106398
Truss Crossbrace (28" long)
12
3153A91
5/16" Cable Clamp
3
1011200
Truss Side (43 1/2" long)
13
D1170
5/8" Non-lock Nut
4
--1011202
Truss Crossbrace
f/8" x 62’ & 72’ (23 1/2" long)
14
106207-1
10" Half Clamp
18
1025341
3/8" Cable x 72’-0" long
5
1011201
Truss Crossbrace (35 3/4" long)
19
1025342
6
4841
3/8" U-Bolt
(f/62’, 72’ & 82’ Lower Truss)
20
1028314
Lower Housing Rigid Truss
7
3010L11
3/8" Cable Clamp
8
8A
1004137
862027
9
52475
10
1004463
REF.
NO.
PART
NO.
1
106399
2
DESCRIPTION
HUTCHINSON HOUSING
REF.
NO.
PART
NO.
25
Tube Housing - Upper
1013627-220
f/8" x 52’ (galv.)
1013627-260
f/8" x 52’ (painted)
26
1015176-220
1015176-260
f/8" x 62’ (galv.)
(See following page for Housings with
Internal Bearings)
27
1013483-120
1013483-160
f/8" x 72’ (galv.)
REF.
NO.
PART
NO.
28
10” Only
25
1013627-320
f/8" x 52’ (galv.)
1013627-360
29
Tube Housing - Center
1013484-220
f/8" x 72’ (galv.)
1013484-260
26
1015176-320
1015176-360
30
10” Only
31
10” Only
32
Tube Housing - Lower
1013635-120
f/8" x 52’ (galv.)
1013635-160
33
1015175-120
1015175-160
f/8" x 62’ (galv.)
34
1013485-120
1013485-160
f/8" x 72’ (galv.)
35
10” Only
36
--
8309A
1014153
MAYRATH HOUSINGS
27
DESCRIPTION
1013483-120
1013483-160
f/8" x 62’ (galv.)“
f/8" x 62’ (painted)“
f/8" x 72’ (galv.)
28
10” Only
29
1013484-320
f/8" x 72’ (galv.)
1013484-360
Tube Housing - Upper Middle
Tube Housing - Lower Middle
Tube Housing -Upper Middle
30
10” Only
31
10” Only
32
1013635-120
1013635-160
f/8" x 52’ (galv.)
33
1015175-120
1015175-160
f/8" x 62’ (galv.)
34
1013485-120
1013485-160
f/8" x 72’ (galv.)
35
10” Only
36
--
8309A
1014153
Tube Housing-Lower Middle
05-2012
DESCRIPTION
8" Connecting Band
Reinforcing Strap
f/8" Connecting Band
8" Connecting Band
Reinforcing Strap
PB 1028539-PB 10
PARTS LIST
Page PB- 11
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB 11
PARTS LIST
Page PB- 12
MAYRATH HOUSINGS
FOR INTERNAL BEARINGS
REF.
NO.
PART
NO.
25
1013650-320
f/8" x 52’ (galv.)
26
1015845-320
f/8" x 62’ (galv.)
27
1013652-120
f/8" x 72’ (galv.)
28
10” Only
29
1013653-320
f/8" x 72’ (galv.)
30
10” Only
31
10” Only
32
1013654-120
f/8" x 52’ (galv.)
33
1015844-120
f/8" x 62’ (galv.)
34
1013656-120
f/8" x 72’ (galv.)
35
10” Only
36
--
8309A
1014153
REF.
NO.
PART
NO.
DESCRIPTION
1
--1028491
Head Plate
f/8" (f/1" Bearing)
2
--6818D
Head Bearing
1" Bearing
3
--1028492
Head Cover
f/8"
DESCRIPTION
HUTCHINSON HOUSINGS
REF.
NO.
PART
NO.
25
1013650-220
f/8" x 52’ (galv.)
26
1015845-220
f/8" x 62’ (galv.)
27
1013652-120
f/8" x 72’ (galv.)
28
10” Only
29
1013653-220
f/8" x 72’ (galv.)
30
10” Only
31
10” Only
32
1013654-120
f/8" x 52’ (galv.)
33
1015844-120
f/8" x 62’ (galv.)
34
1013656-120
f/8" x 72’ (galv.)
35
10” Only
36
--
8309A
1014153
8" Connecting Band
Reinforcing Strap
DESCRIPTION
8" Connecting Band
Reinforcing Strap
HEAD BEARING
DETAIL
0400180P
05-2012
PB 1028539-PB 12
PARTS LIST
Page PB- 13
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB13
PARTS LIST
Page PB- 14
8" FLIGHT SECTIONS
REF.
NO.
PART
NO.
DESCRIPTION
37
1013636
1013640
Flight - Upper
f/8" x 52’ (21’-2 3/8" long) - 7 ga.
f/8" x 52’ (21’-2 3/8" long) - 1/4"
38
1013637
1013641
f/8" x 62’ (31’-2 3/8" long) - 7 ga.
f/8" x 62’ (31’-2 3/8" long) - 1/4"
39
1013638
1013642
f/8" x 72’ (11’-2 3/8" long) - 7 ga.
f/8" x 72’ (11’-2 3/8" long) - 1/4"
40
---
41
1013722
1013723
42
---
43
---
44
1013480
1013481
---
45
8" OPTIONAL INTERNAL BEARING
FLIGHT COMPONENTS
REF.
NO.
PART
NO.
DESCRIPTION
51
33276
Bolt 5/8" x 1 1/2" long
52
1012295
8" Internal Bearing Cover Plate (7 1/4" long)
53
1013767
54
60522
Internal Bearing Hanger w/Bronze Bushing
---
8379C
1012297
Replacement Bronze Bushing only
Positioning Bar for Internal Bearing
Flight - Center
f/8" x 72’ (29’-11 5/8" long) - 7 ga.
f/8" x 72’ (29’-11 5/8" long) - 1/4"
Flight -Upper Middle
10” Only
Flight -Lower Middle
10” Only
Flight - Lower
f/8" x 52’, 62’ & 72’ (30’-2 5/8" long) 7 ga.
f/8" x 52’, 62’ & 72’ (30’-2 5/8" long) - 1/4"
8" FLIGHT FOR OPTIONAL
INTERNAL BEARING UNITS
MISCELLANEOUS FLIGHT COMPONENTS
REF.
NO.
--
REF.
NO.
PART
NO.
52806
Weld-in Bushing f/8" (1 1/4" I.D. x 4 3/8" long)
Flight - Upper (10’-8 1/4" long)
f/ 7 ga. Flight
f/1/4" Flight
--
1011164
Weld-in Connecting Stub f/8" Std.
--
1011166
Weld-in Internal Bearing Connecting Stub (8")
Flight - Intermediate (9’-9 3/4" long)
f/7 ga. Flight
f/1/4" Flight
--
1013718
Weld-in Head Stub f/8"
1011315
1011316
--
8384D
Intake Repair Flight f/8" (1/4" thick)
1013647
1013649
Flight - Lower (10’-7" long)
f/7 ga. Flight
f/1/4" Flight
PART
NO.
DESCRIPTION
1013646
1013648
46
47
48
DESCRIPTION
8" FLIGHT CONNECTING BOLTS
REF.
NO.
PART
NO.
49
1009499
Connecting Bolt 7/16" x 3" long (grade 8)
black Hex Head Capscrews
50
1011181
Stover Type Locknut 7/16"
05-2012
DESCRIPTION
PB 1028539-PB 14
PARTS LIST
Page PB- 15
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB 15
PARTS LIST
Page PB- 16
REF.
NO.
1
PART
NO.
106399
2
106398
Truss Crossbrace (28" long)
3
1011200
Truss Side (43 1/2" long)
4
---
DESCRIPTION
Truss Side (32" long)
Truss Crossbrace
1011211
f/10" x 62’, 72’ & 82’ (24 5/8" long)
REF.
NO.
11
PART
NO.
866015-1
DESCRIPTION
5/8" Dia.x 11" Eyebolt
12
--3153A91
3010L11
5/16" Cable Clamp
3/8" Cable Clamp (f/10" x 82’ Auger
only)
5
1011201
Truss Crossbrace (35 3/4" long)
13
D1170
5/8" Non-lock Nut
6
4841
3/8" U-Bolt
(f/62’, 72’ & 82’ Lower Truss)
14
106207-1
10" Half Clamp
7
3010L11
3/8" Cable Clamp
18
1025341
8
8A
1004137
862027
19
1025342
20
1028314
Lower Housing Rigid Truss
9
52475
10
1004463
MAYRATH HOUSINGS
(See following page for Housings with
Internal Bearings)
REF.
NO.
25
DESCRIPTION
1013639-320
f/10" x 52’ (galv. - 14 ga. Housing)
1013639-330
1013639-360
1015850-320
1015850-330
1015850-360
27
1013498-120
1013498-130
1013498-160
1025202-130
1025202-170
f/10"
f/10"
f/10"
f/10"
f/10"
29
30
31
REF.
NO.
25
PART
NO.
26
28
HUTCHINSON HOUSING
x 72’ (galv. - 14 ga. Housing)
x 72’ (painted)“
x 82’ (painted - 12 ga. Housing)
1013499-320
1013499-330
1013499-360
1025203-330
1025203-370
Tube Housing -Upper Middle
f/10" x 82’ (painted - 12 ga. Housing)
1028402-130
1028402-170
Tube Housing-Lower Middle
26
PART
NO.
DESCRIPTION
1013639-220
1013639-230
1013639-260
1015850-220
1015850-230
1015850-260
27
1013498-120
1013498-130
1013498-160
28
1025202-130
1025202-170
Housing)
29
1013499-220
1013499-230
1013499-260
f/10"
f/10"
f/10"
f/10"
f/10"
x 72’ (painted)
x 82’ (painted - 12 ga.
30
f/10" x 82’ (painted - 12 ga.
31
f/10" x 82’ (painted - 12 ga.
1025203-230
1025203-270
Housing)
1028402-130
1028402-170
Housing)
32
1013643-120
1013643-130
1013643-160
32
1013643-120
1013643-130
1013643-160
33
33
1015849-120
1015849-130
1015849-160
1015849-120
1015849-130
1015849-160
34
34
1028345-120
1028345-130
1028345-160
1013500-120
1013500-130
1013500-160
35
35
1028403-130
1028403-170
1028403-130
1028403-170
Housing)
f/10" x 82’ (painted - 12 ga.
36
1012D
05-2012
10" Connecting Band
36
1012D
10" Connecting Band
PB 1028539-PB16
PARTS LIST
Page PB- 17
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB 17
PARTS LIST
Page PB- 18
MAYRATH HOUSINGS
HUTCHINSON HOUSINGS
REF.
NO.
REF.
NO.
25
PART
NO.
DESCRIPTION
1013657-320
1013657-330
25
PART
NO.
DESCRIPTION
1013657-220
1013657-230
26
1015848-320
1015848-330
26
1015848-220
1015848-230
27
1013659-120
1013659-130
1025206-130
1025206-170
f/10"
f/10"
f/10"
f/10"
27
1013659-120
1013659-130
28
1025206-130
1025206-170
f/10" x 82’ (painted- 12 ga. Housing)
28
29
30
31
32
33
34
35
36
x
x
x
x
72’
72’
82’
82’
(galv. - 14 ga. Housing)
(painted - 12 ga. Housing)
1013660-320
1013660-330
29
1013660-220
1013660-230
1025207-330
1025207-370
30
1025207-230
1025207-270
1028406-130
1028406-170
31
1028406-130
1028406-170
1013661-120
1013661-130
32
1013661-120
1013661-130
1015847-120
1015847-130
33
1015847-120
1015847-130
1028547-120
1028547-130
34
1013663-120
1013663-130
1028407-130
1028407-170
35
1028407-130
1028407-17
36
1012D
1012D
10" Connecting Band
REF.
NO.
1
PART
NO.
--1028346
DESCRIPTION
Head Plate
f/10" (f/1 1/4" Bearing)
2
--8325A
Head Bearing
1 1/4" Bearing
3
--1028360
Head Cover
f/10"
10" Connecting Band
HEAD BEARING
DETAIL
0400180P
05-2012
PB 1028539-PB 18
PARTS LIST
Page PB- 19
DETAIL A
DETAIL B
DETAIL C
02854A5
05-2012
0400171
02851A2
PB 1028539-PB 19
PARTS LIST
Page PB- 20
10" FLIGHT SECTIONS
10" OPTIONAL INTERNAL BEARING
FLIGHT COMPONENTS
REF.
NO.
PART
NO.
37
1013619
1013624
38
1013621
1013625
f/10" x 62’ (31’-2" long) - 7 ga.
f/10" x 62’ (31’-2" long) - 1/4"
39
1013623
1013626
f/10" x 72’ (11’-2" long) - 7 ga.
f/10" x 72’ (11-2" long) - 1/4"
40
1025324
1025328
f/10" x 82’ (16’-2" long) - 7 ga.
f/10" x 82’ (16-2" long) - 1/4"
1013673
1013674
Flight - Center
f/10" x 72’ (29’-11 5/8" long) - 7 ga.
f/10" x 72’ (29’-11 5/8" long) - 1/4"
MISCELLANEOUS FLIGHT COMPONENTS
41
REF.
NO.
PART
NO.
DESCRIPTION
1025325
1025329
Flight -Upper Middle
f/10" x 82’ (20’-3 3/4" long) - 7 ga.
f/10" x 82’ (20’-3 3/4" long) - 1/4"
--
1014501
Weld-in Bushing f/10" Intake (6" long)
--
52809
Weld-in Bushing f/10" (1 1/2" I.D. x 4 3/8" long)
1013673
1013674
Flight -Lower Middle
f/10" x 82’ (29’-11 5/8" long) - 7 ga.
f/10" x 82’ (29’-11 5/8" long) - 1/4"
--
1011165
Weld-in Connecting Stub f/10" Std.
--
1011167
Weld-in Internal Bearing Connecting Stub (10")
44
1013495
1013496
Flight - Lower
f/10" x 52’, 62’ & 72’ (30’-2 5/8" long) - 7 ga.
f/10" x 52’, 62’ & 72’ (30’-2 5/8" long) - 1/4"
--
1013672
Weld-in Head Stub f/10"
--
40057
Intake Repair Flight f/10" (3/8" thick)
45
1025327
1025331
42
43
DESCRIPTION
Flight - Upper
f/10" x 52’ (21’-2" long) - 7 ga.
f/10" x 52’ (21’-2" long) - 1/4"
REF.
NO.
PART
NO.
DESCRIPTION
51
33276
Bolt 5/8" x 1 1/2" long (grade 5) plated
52
1012296
53
1013768
54
---
4010A91
1051D
1012298
Internal Bearing Hanger w/Bronze Bushing
Replacement Bronze Bushing only
Positioning Bar for Internal Bearing
f/10" x 82’ (15’-7 1/2" long) - 7 ga.
f/10" x 82’ (15’-7 1/2" long) - 1/4"
10" FLIGHT FOR OPTIONAL
INTERNAL BEARING UNITS
REF.
NO.
46
47
48
PART.
NO.
DESCRIPTION
1013628
1013630
Flight - Upper (10’-8 /14" long)
f/7 ga. Flight
f/1/4" Flight
1011320
1011321
Flight - Center (9’-9 3/4" long)
f/7 ga. Flight
f/1/4" Flight
1013629
1013631
Flight - Lower (10’-7" long)
f/7 ga. Flight
f/1/4" Flight
10" FLIGHT CONNECTING BOLTS
REF.
NO.
PART
NO.
DESCRIPTION
49
1009504
Connecting Bolt 1/2" x 3 1/2" long
(Grade 8) black Hex Head Capscrew
50
1011182
Stover Type Locknut 1/2"
05-2012
03-2012
PB 1028539-PB 20
PARTS LIST
Page PB- 21
UNDERCARRIAGE AND
HYDRAULIC LIFT COMPONENTS
REF.
NO.
1
PART
NO.
DESCRIPTION
REF.
NO.
PART
NO.
DESCRIPTION
7
1007989
Undercarriage Mount
8
8
--862026
106383
Undercarriage Upper Frame Mounting Pin
f/8" (1" x 10" long)
f/10” ( 1” x 12 1/4” long)
1010980
1007782
Undercarriage Frame
f/8" x 52’
(w/Axle and Lower Arms)
f/8" x 62’
f/8" x 72’
--1004560
1007996
1007996
Upper Lift Arm Frame“
f/8" x 52’
f/8" x 62’
f/8" x 72’
9
1004291
Upper Frame Mounting Bushing f/10" Only
10
3
--1003963
1003788
BoLt-Together Axle
f/8" x 62’ (111" long)
f/8" x 72’ (120" long)
--6393D
107225
Wheel Rim
15" x 4.5 KB 4-Bolt f/52’ & 62’
15" x 6 LB 5-Bolt f/72’
11
---
4
--1028502
1028503
Bolt-Together Lower Arm
f/8" x 62’
f/8" x 72’
1004368-1
1004369-1
Hydraulic Cylinder
(See Page PB-25 for parts breakdown)
4" x 24" Stroke f/52’
4" x 36" Stroke f/62’ & 72’
5
1001563
12
Spindle & Hub Assembly 4-Bolt
f/8" x 52’-62’
--1006328
1006330
Hydraulic Hose
f/8" x 52’ (24’-6" long)
f/8" x 62’ & 72’
(31’-6" long)
5
1003104
1005886
Shut-off Valve
106413
90° Street El 1/2" Pipe
6
--1010978
1007780
1007780
Spindle & Hub Assembly 5-Bolt
13
f/8" x 72’
(See Page PB-24 for parts breakdown) 14
Undercarriage Support Bracket
15
f/8" x 52’
f/8" x 62’
f/8" x 72’
1006324
Hydraulic Mounting Clamp
2
--1010979
02065A3-P
05-2012
PB 1028539-PB 21
PARTS LIST
10” x 82’ AUGER
UNDERCARRIAGE AND
HYDRAULIC LIFT COMPONENTS
REF.
PART
NO.
NO.
1028271
Right Hand Arm Weldment
2
1028272
Left Hand Arm Weldment
3
1028282
Cylinder Mount Tube
1028229
SN 914303 to PRESENT with the exception
REF NO 4 (See note below)
DESCRIPTION
1
4
Page PB- 22
Cross Brace Lower Frame
REF.
PART
NO.
NO.
DESCRIPTION
16
1025368
Hydraulic Hose 3/8" x 44’-6" long
SN 914303 to SN 929403
17
1006324
Hydraulic Mounting Clamp
4
1024605
18
106413
90° 1/2" Elbow Fitting
19
1010462
Hydraulic Hose 3/8" x 1’-6"
5
1024604
Support Stand
20
1004732
Hydraulic 1/2" Tee Fitting
6
1024598
Lower Arm Tube
21
1025415
Reflector Plate Assembly
7
1028268
Upper Lift Frame
22
1025533
Pivot Bushing 1-5/8" x 11/16"
8
1025172
Axle Tube
23
1021198
Bushing 1-1/2" O.D. x 14/16" long
9
1028314
Lower Undercarriage Mount/Under
24
1025548
Lower Pivot Bracket
25
1025551
Lower Pivot X-Brace
10
1025316
Upper Undercarriage Mount
26
1025552
Lower Pivot Cross Support
11
1003104
Hub/Spindle Assembly
27
1005886
Shut-off Valve
12
107225
Wheels
13
1024322
Spacer Tube Upper Carriage Mount
28
106207-1
10" Half Clamp
14
1025392
Upper Carriage Mount Bolt 1-1/4" x 24"
29
1027146
Retainer Washer
15
1004369
Hydraulic Cylinder 4" Bore x 36"
Cross Brace Lower Frame
Truss
03550A2
05-2012
PB 1028539-PB 22
PARTS LIST
Page PB- 23
8” & 10” SWING AWAY AUGER
SPINDLE & HUB ASSEMBLIES
4-BOLT
(2-1/16" x 10")
f/8" x 52’-62’
& 10" x 52’-62’
5-BOLT
(2-3/8" x 14")
f/8" x 72’
& 10" x 72’ & 82’
REF.
--
DESCRIPTION
Spindle & Hub Assy.
1001563
1003104
1
Spindle
1001002
1001004
2
Grease Seal
106245
107233
3
Inner Cone
(Timken No.)
3079R1
(LM67048)
3078R1
(LM48548)
4
Inner Cup
3148R1
3147R1
5
Hub
**90174
*1006987
6
Outer Cup
(Timken No.)
40552
(LM11910)
3148R1
(LM67010)
7
Outer Cone
(Timken No.)
40551
(LM11949)
3079R1
(LM67048)
8
8
Lug Bolt
Lug Nut
106241
--
-107235
9
Washer
106252
107229
10
Slotted Hex Nut
106250 (5/8")
11
Cotter Pin
D1146
(5/32" x 1-1/4")
12
Hub Cap
106244
6360C (3/4")
107230
(5/32" x 1-3/4")
107234
01496A1
05-2012
PB 1028539-PB 23
PARTS LIST
Page PB- 24
HYDRAULIC CYLINDER
4” BORE x 24” STROKE
COMPLETE NO. 1004368-1
USED ON 8” x 52’
& 10” x 52’
REF.
NO. DESCRIPTION
1
Rod Clevis
4” BORE x 36” STROKE
COMPLETE NO. 1004369-1
USED ON 8” x 62’ & 72’
& 10” x 62’, 72’ & 82’
HUTCHINSON/
MAYRATH
MONARCH
PART NO.
PART NO.
1028822
492652
HUTCHINSON/
MAYRATH
MONARCH
PART NO.
PART NO.
1028822
492652
2
Clevis Pin
1028823
134953
1028823
134953
3
Clevis Pin Clip
1028824
134952
1028824
134952
4
Port Adapter
1028825
642643
1028825
642643
5
Breather
1028826
110559
1028826
110559
6
*End Cap O-Ring
7
*Piston O-Ring
8
*Rod O-Ring
9
*Rod Wiper Seal
10 *End Cap Back-up Washers
11 *Piston Back-up Washers
12 *Rod Seal Back-up Washers
*Only available as part of Seal Kit.
Seal Kit #1028827
Seal Kit #1028828
0400196
05-2012
PB 1028539-PB 24
PARTS LIST
Page PB- 25
8” & 10” SWING AWAY AGUER MAIN AUGER INLET
HOPPER COMPONENTS
11
5
6
22
1
24
7
23
8
15
10
9
25
13
26
23
28
14
12
27
4
2
3
28
14
16
This Swivel Hitch used on the
1041302 Intake (8” x 72’)
1041300 Intake (10” x 72’)
20 21
Ref.
No.
1
(1)
(1)
(1)
(1)
2
(2)
3
Part
No.
1041325
1041302
1041326
1041300
1041303
1013274-2
1012163-2
1011096
(3) 1017958
4
5
6
7
8
9
10
(10)
11
12
1011572
1040768
1011213
1039139
1040836
1040757
1013422
1013423
1004287
1041086
05-2012
17
This Swivel Hitch used on the
1041303 Intake (10” x 82’)
20 21
18 19
17
18 19
Ref. Part
No. No.
Description
Inlet Hopper f/ 8” x 52’ & 62’ Models
Inlet Hopper f/ 8” x 72’ w/ Swvl. Hitch
Inlet Hopper f/ 10” x 52’ & 62’ Models
Inlet Hopper f/ 10” x 72’ w/ Swvl. Hitch
Inlet Hopper f/ 10” x82’ w/ Swvl. Hitch
Gearbox, Lower f/ 8” Models
Gearbox, Lower f/ 10” Models
(See page PB30 for details)
PTO Driveline, 14R Category 3 - 50°
PTO Driveline, 35R Category 3 - 50°
(10” x 82’ Models Only)
Jack Assembly
Access Door, Intake Hopper
PTO Driveline Bracket
PTO Driveline Storage Hook
Seal f/ Lower Gearbox Upper Shaft
Seal Mount f/ Lower Gearbox
Cover Plate f/ 8” Models
Cover Plate f/ 10” Models
Canister f/ Operator’s Manual
Clean-out Cover
13
14
15
16
17
1013675
1025343
1013526
1013529
1040774
(17) 1041350
18
19
20
21
22
23
24
25
26
27
28
02818A4A
1010485
33139
3305A1
D1166
1004460
1001987
1013783
1001986
1001983
8371C
41132
Description
Rubber Washer f/ Gearbox Shaft
Bracket, Gearbox Mount
Cover, Grease Zerk Access
Shield, PTO to Gearbox
Swivel Hitch Weldment
(8” x 72’ & 10” x 72’ Models)
Swivel Hitch Weldment
(10” x 82’ Models)
Bolt, 5/8-11 x 4” G5 PLT
Nut, 5/8-11 Nylon Lock PLT
Clevis Pin, 5/8”
Hair Pin
Decal, Caution: Winch Handle
Decal, Danger: Do Not Operate...
Decal, PTO Grease Information
Decal, Danger: Rotating Auger...
Decal, Danger: Rotating Driveline
Key, 1/4” sq. x 1 1/2” long
Key, No. 809 Woodruff
PB 1028539-PB 25
PARTS LIST
8” & 10” SWING AWAY AGUER
MAIN AUGER INLET
HOPPER COMPONENTS
REF.
NO.
1
PART
NO.
1011096
Page PB- 26
REF NO 8 (See note below)
DESCRIPTION
PTO Drive Assembly- 14R
REF.
NO.
8
PART
NO.
1027698
DESCRIPTION
U-Joint Assembly (10" Model)
-1035052
U-Joint Repair Kit (12R)
(zerk on the end cap)
-40515
( zerk in center)
9
1013526
Grease Zerk Access Cover
1017958
PTO Drive Assembly - 35R - (10" x 82’ only)
2
8371C
1/4" x 1-1/2" Square Key
3
--
1013529
1013799
Shield
3/8" Thumb Head Bolt x 3/4" long (for shield)
10
1013675
Rubber Washer
4
1039139
PTO Driveline Storage Hook
11
1025343
Gearbox Mounting Angle
5
1004287
Manual Can
12
6
1011213
PTO Driveline Bracket
1013274-1
8" Lower Gearbox Assembly
(See Page PB-31 or PB-32 for parts breakdown.)
1012163-1
10" Lower Gearbox Assembly
(See Page PB -31 or PB-32 for parts breakdown.)
7
1013460
1013465
1025195
8" Inlet Hopper
10" Inlet Hopper (52’, 62’ & 72’ Models)
10" Inlet Hopper (82’ Model only)
13
1013422
1013423
8" Cover Plate
10" Cover Plate
14
1004738
Clean-out Cover
15
1011572
Jack Assembly
16
1005443
Washer 2" O.D. x 13/32" I.D.
17
41132
No. 809 Woodruff Key
18
1025396
Spacer Bushing
19
1028818
Washer 1" x 13/32" I.D. x 1/4" Galv.
8
1012156
U-Joint Assembly (8" Model)
SN 42001 to PRESENT
-1024648
U-Joint Repair Kit - (6R)
(zerk on the end cap)
SN 420001to SN 929403
--
40523
U-Joint Repair Kit - (6R)
(zerk in center)
02818A4
05-2012
PB 1028539-PB 26
PARTS LIST
Page PB- 27
ALL 8” MODELS & 10” X 36’ - 52’ - 62’ & 72’ MODELS SWING AWAY AUGER
PTO DRIVELINE
TRACTOR
MANUFACTURED BY WEASLER
END
AUGER
END
USED ON 8” & 10"
SPECIFICATIONS:
U-JOINT TYPE - 14R
AUGER END 1 1/4" BORE
WITH 1/4" KEYSEAT
TRACTOR END 1 3/8 - 6B SPLINE
CATEGORY 3 - 50°
NOTE: Repair parts for PTO
drivelines can also be
purchased directly from:
Weasler Engineering,Inc.
P.O. Box 558
West Bend, WI 53095
414-338-2161
REF.
NO.
-1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DESCRIPTION
PTO Driveline, Complete
.
Joint & Tube Half Assembly
with Guard (Tractor End)
Inner Guard
(Includes Ref. No. 4)
Inner Safety Sign
Inner Shield Bearing Retainer
14R U-Joint Cross Repair Kit
Yoke & Ball Shear Assembly
Shear Bolt and Nut Kit f/8"
Shear Bolt and Nut Kit f/10"
Spring Lock Flange Repair Kit
Joint & Shaft Half Assembly
with Guard (Auger End)
.375 - 16 x .38 long Setscrew
End Yoke
50° CV Center Housing
Outer Shield Nylon Bearing Kit
Outer Safety Sign
Outer Guard
HUTCHINSON/
MAYRATH
PART NO.
WEASLER
PART NO.
1011096
230-17956
1015288
92-17956
1011343
96-17956
13-10022
1010565
40524
1004751
1011178
1004779
1003674
1015287
13-10022
19-11104
03-10134
26-11674
(See Note A)
(See Note B)
26-10133
93-17956
33170
1011342
1011344
1010565
13-10021
1011345
11-10215
14131-1856
14191-1951
19-11104
13-10021
97-17956
NOTE A: Shear Bolt Kit f/8" includes (6) 3/8" - 16 x 1" long Grade 2 hex head bolts and locknuts.
NOTE B: Shear Bolt Kit f/10" includes (6) 3/8" - 16 x 1" long Grade 5 hex head bolts and locknuts.
02633A1-Q
05-2012
PB 1028539-PB 27
10” X 82” MODEL
PARTS LIST
Page PB- 28
PTO DRIVELINE
TRACTOR
END
MANUFACTURED BY WEASLER
AUGER
END
drivelines can also be
purchased directly from:
Weasler Engineering,Inc.
P.O. Box 558
West Bend, WI 53095
414-338-2161
REF.
NO.
-1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DESCRIPTION
PTO Driveline, Complete
Inner Guard
Inner Safety Sign
Inner Shield Bearing Retainer
35R U-Joint Cross Repair Kit
Shear Bolt and Nut Kit f/10" x 82’
End Yoke
50° CV Center Housing
Outer Shield Nylon Bearing Kit
Outer Safety Sign
Outer Guard
USED ON 10" x 82’ MODEL
SPECIFICATIONS:
U-JOINT TYPE - 35R
AUGER END 1-1/4" BORE
WITH 1/4" KEYSEAT
TRACTOR END 1-3/8 - 6B SPLINE
CATEGORY 3 - 50° CV
HUTCHINSON/
MAYRATH
PART NO.
WEASLER
PART NO.
1017958
1026018
240-17662
93-17662
1026019
96-17662
13-10022
1026020
1026021
1026022
1018892
1026023
1026024
13-10022
19-11105
03-10135
26-13640
(See Note A)
26-10015
93-17662
33170
1026025
1026026
1010565
13-10021
1026027
11-10215
35261-1954
35271-1880
19-11104
13-10021
H40EXT
NOTE A: Shear Bolt Kit f/10" includes (6) 3/8" - 16 x 1" long Grade 8 hex head bolts and locknuts.
02633A1-Q
05-2012
PB 1028539-PB 28
Page PB- 29
PARTS LIST
05-2012
PB 1028539-PB 29
PARTS LIST
Page PB- 30
8” & 10” SWING AWAY AUGER GEARBOX
SN _________ to PRESENT
Specifications:
Ratio 1:1
Input Shaft - 1 1/4” dia. f/ 8” Models
Input Shaft - 1 1/4” dia. to 1 1/2” dia. f/ 10” Models
Output Shaft - 1 1/4” dia.
Lower Gearbox Mounted
on Main Inlet Hopper
Complete Gearbox:
1013274-2 f/ 8” Models
1012163-2 f/ 10” Models
14
15
13
16
Item No. 9 (Seal)
at this end of shaft f/ 8” Models
Item No. 10 (Seal) f/ 10” Models
9 10
2
4
8
1
5
6
17
7
6
11
12
12
6
9
9
3
5
14
11
5
Pack this Bearing with
NGLI Grade 2 Grease
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
05-2012
Description
Housing, Mach R20A Tap 68°
Housing, Mach R20A Thru 68°
Stub Shaft/Gear
Cross Shaft/Gear
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Seal, 1.25-2.00-.312
Seal, 1.50-2.00-.313
Retaing Ring, Ext.
Bearing Thrust Washer
Bolt, 3/8-16 x 1 1/2” SHCS
Plug, 1/4-18 NPT
Plug, 1/8-27 NPT Vent
Grease Zerk
Washer, 1.937” x 1.284” x .030”
02183A6A
Gearbox f/ 8”
1013274-2
Part No.
1041209
1041195
1041205
---1041211
1041197
1041198
1041199
1041206
1041201
1041196
1041200
1041202
1041204
1041210
1041207
1041208
Gearbox f/ 10”
1012163-2
Part No.
1041209
1041195
1041205
1041203
1041211
1041197
1041198
1041199
1041206
1041201
1041196
1041200
1041202
1041204
1041210
1041207
1041208
PB 1028539-PB 30
PARTS LIST
Page PB- 31
8” & 10” SWING AWAY AUGER GEARBOX
LOWER GEARBOX MOUNTED
ON MAIN INLET HOPPER
SPECIFICATIONS: RATIO: 1 TO 1
INPUT SHAFT - 1 1/4" dia.
2
6
1
Gearbox
Part No. 1012163-1
Shown
3
(8" SWING-AWAY AUGER)
21
NPUT SHAFT - 1 1/4" dia. to 1 1/2" dia.
13
17
4
7
2
OUTPUT SHAFT - 1 1/4" dia.
( 8” & 10” Units)
1
16
15
This gearbox is purchased from Weasler. The
word “CHINA” will be inscribed on the housing.
10 11 12
8
4
5
14
Complete Gearbox Assembly for
8” Models, Order Part No. 1013274-1
19
18
8 9
8
7
1
Gearbox
1013274-1
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
*
Description
Brg. Cone #LM67048
Brg. Cup #LM67010
Spacer (.127 thick)
Snap Ring
Seal (Nat. #470163)
Woodruff Key, 1/4” x 1 1/8”
O-Ring (3.15" O.D.)
5/16" x 3/4" Capscrew
5/16" Lockwasher
Shim .003
Shim .005
Shim .014
Seal (Nat. #471808)
Seal (Nat. #470163)
Square Key 1/4" x 7/8"
Washer - Grease
1/8" NPT Vented Plug
Retainer f/Snap Ring
Snap Ring
1/8" Solid Plug (NPT Pipe)
Grease Zerk (1/8”-27)
1/4" Plug (NPT
* Pipe)
9
2
4
20
9
7
1
2
Gearbox
1012163-1
Part
No.
Part
No.
3079R1
3148R1
1023533
003538
1023279
837029
1023282
4701-1
33144
40382
40381
40380
1023278
1023279
020153
1005472
1015290
10” Only
10” Only
035913
3028R1
020009
3079R1
3148R1
1023533
003538
1023279
837029
1023282
4701-1
33144
40382
40381
40380
1023278
1023279
020153
1005472
1015290
1023543
003381
035913
3028R1
020009
* Not Shown
02183A6
05-2012
PB 1028539-PB 31
PARTS LIST
Page PB- 32
AUGER GEARBOX
SN 914303 to 929403
LOWER GEARBOX MOUNTED
ON MAIN INLET HOPPER
SPECIFICATIONS: RATIO: 1 TO 1
Gearbox
Part No. 1013274-1
Shown
INPUT SHAFT - 1 1/4" dia.
NPUT SHAFT - 1 1/4" dia. to 1 1/2" dia.
OUTPUT SHAFT - 1 1/4" dia.
( 8” & 10” Units)
This gearbox is purchased from Weasler. The
word “CHINA” will be inscribed on the housing.
Complete Part NO.1013274-1
Ref.
No.
Part
No.
Description
1
Case
2
Quill
3
End Cap f/Shaft
4
Brg. Cone #LM67048
5
Brg. Cup #LM67010
6
Spacer (.127 thick)
7
Snap Ring
8
Seal (Nat. #470163)
9
Shim .007 x 1.25 I.D.
10
Gear 68 Degree Cut
11
O-Ring (3.15" O.D.)
12
5/16" x 3/4" Capscrew
-5/16" Lockwasher
13
Shim .003
14
Shim .005
15
Shim .014
16
Seal (Nat. #471808)
17
Seal (Nat. #470163)
18
Shaft Output
19
Shaft Input
20
Square Key 1/4" x 7/8"
21
Washer - Grease
22
23
Retainer f/Snap Ring
24
Snap Ring
25
1/8" Solid Plug (NPT Pipe)
* 1/4" Plug (NPT Pipe)
* Not Shown
05-2012
1023523
1023524
1023525
3079R1
3148R1
1023533
003538
1023279
1005459
1023285
1023282
4701-1
33144
40382
40381
40380
1023278
1023279
1023530
1023532
020153
1005472
1015290
1023543
003381
035913
020009
Complete Part NO.1012163-1
Part
No.
1023523
1023524
1023525
3079R1
3148R1
1023533
003538
1023279
1005459
1023285
1023282
4701-1
33144
40382
40381
40380
1023278
1023279
1023532
1023532
020153
1005472
1015290
1023543
003381
035913
02183A6
PB 1028539-PB 32
PARTS LIST
Page PB- 33
8” & 10” SWING AWAY AUGER SWING-OUT HOPPER
LIFT COMPONENTS
(FOR FLEX HOPPER DESIGN)
5
9
1
10
11
9
4
3
4
3
2
6
8
7
REF.
PART
NO.
NO.
DESCRIPTION
1
1028343
Lift Arm Weldment w/Pulley
2
1004288
Hopper Lift Cable 3/16" x 26’
3
1005365
Hopper Hook w/Chain
4
5321C
3/16" Cable Clamp
5
1004275
1/2" Washer Head Pin (3 1/8" long)
6
1004266
Winch Mounting Plate (8” Model)
6
1023173
Winch Mount Weldment (10” Model)
7
1018619
Complete 1000# Brake Winch (w/handle)
(See page PB-34 for parts breakdown.)
--
1018620
Handle for Winch
8
1018621
Cable to Winch Keeper
9
1007890
Pulley Clevis Plate
10
1008197
Pulley Bushing (1" O.D.)
11
1008195
Cable Pulley 3" O.D. x 1" I.D.
02641A1-P1
05-2012
PB 1028539-PB 33
PARTS LIST
Page PB- 34
8” & 10” SWING AWAY AUGER WINCH
COMPLETE WINCH
ASSEMBLY - 1018619
ITEM
PART
KIT
ITEM
NO.
DESCRIPTION
NO.
NO.
NO.
PART
KIT
DESCRIPTION
NO.
NO.
1
1/4" - 20 x 1 1/2" Hex Screw
0913-03
2
1/4" Lock Washer
2524-03
17
Pawl
1891-07
18
Washer
3
1/4" wide Flat Washer
0917-07
0904-03
19
38" x 5 1/2" Pawl Bolt
4
Handle Retainer Spacer
2045-06
1907-02
20
Frame
5
0233-07
Spring
0940-00
21
9/16" - 18 Locknut
0673-03
6
Handle
1018620
22
Bearing
2680-03
7
Reel Assembly
0488-05
23
Bushing (2)
2679-09
8
10-24 Hex Nut (2)
2706-03
24
Washer
0229-03
9
Cable Keeper
2704-03
25
Pinion Gear (3)
0776-03
10
10-24 x 5/8" Carriage Bolt (2)
2705-03
26
Pinion Shaft
1869-07
11
Front Frame Spacer
1413-08
27
Brake Back-up Plate
1878-09
12
3/8" Lock Nut (2)
1873-03
28
Brake Pad (2)
0846-06
13
3/8" x 1/2" Reel Bolt
1412-02
29
Ratchet
1906-06
14
Back Frame Spacer
1866-04
30
Cover
1915-05
15
Pawl Spring
1909-05
31
10" - 32 x 1 1/2" Cover Screw (2)
2016-03
16
Pawl Spacer
1890-05
1023169
1023170
If kit number covers a combination of part numbers, parts are
sold only by kit number.
Please order by specifying: Model Number
Name of Part or Kit
Part or Kit Number
5442-81
Repair parts ordered directly from:
Shelby Industries, Inc.
175 McDaniel Road
PO. Box 308
Shelbyvile, KY 40066-0308
Phone: 502-633-2040
FAX: 502-633-2186
03116A1
05-2012
PB 1028539-PB 34
PARTS LIST
Page PB- 35
8” SWING AWAY
SWING-OUT HOPPER COMPONENTS
(FLEX HOPPER DESIGN)
9
8
10
16 17
12
10
20
27
19
7
25
6
21
26
15
14
1
23
2
11
3
4
5
Assembly View
of Incline Flight & Stub
13
18
Connects
to U-joint
24
22
Ref. Part
No. No.
Ref. Part
No. No.
1 1036637 Swing-out Hopper f/ 8” Models
15 1018135
Flight, Incline (1/4”) f/ 8”
16 1013763
Swivel Spout f/ 8” Models
17 1015281-3
18 1005889*
Gearbox, Upper (f/ 8” & 10”)
Rubber Sleeve f/ 8” Models
19 1006564
Strap f/ Lid (8” Models)
20 90040
21 1012156
- - 1024648
Snap Fastener for Spout Door
U-Joint (6R) 8” Models
22 33136*
Nut, 3/8-16 Nylon Lock, f/ 8”
23 33068*
Bolt, 3/8-16 x 3” f/ 8”
24 33023*
Washer, 5/16” Flat f/ 8”
25 1001985
Decal, Danger: Rotating Auger
2 1028763 Flight, 1/4” f/ 8” Hopper
3 54008
Flangette f/ 1” Bearing (8” Models)
4 6382C
Bearing, 1” Bore (8” Models)
5 1024827 Tail Stub f/ Flight (8” Models)
6 552445 Stub, Bearing (8” Models)
7 1024825 Bearing Hanger (8” Models)
•Bronze Bushing, 1”
- - 6303D
8 1010333 Lid w/ Hinge (8” Models)
9 1028820 Hopper Belting (8” Models)
10 1013680 Clip, Belt Retaining
11 1004358 Wheel, 8 1/4” O.D.
U-Joint, 1” Bore (4N) 8” Models
12 6340A
13 54498
Stub, Incline Flight (8” Models)
14 1010659 Incline Tube (8” Models)
• Indented Parts Names Indicate these Parts
are Included in the Previous Assembly.
05-2012
03188A1A
PB 1028539-PB 35
8” SWING AWAY
PARTS LIST
REF. NO.
PART NO.
DESCRIPTION
1
1028759
Swing-out Hopper 3-Wheel
2
--1028763
50200
152805
Hopper Flight
f/8" (1/4" Flighting) (59-3/8" long)
Replacement Flight per Foot number
Replacement Flight Bushing
2A
54008
Flangette for 1" Bearing
2B
6382C
1018716
Bearing - 1" Bore (Ball Bearing)
Bearing - 1" Bore (Wood)
2C
--1024827
--1010333
--552445
--1024825
6303D
Flight Tail Stub
f/8" (1.65" O.D. x to 1" x 7-7/8" long)
Lid w/Hinge
f/8"
Bearing Stub
f/8" (1" x 7-1/4" long)
Bearing Hanger w/Bearing
f/8" (1" Bore)
1" Bronze Bushing only
6
--1028820
Rubber Mat
f/8” (14’-6” long)
7
8
1013680
1004358
3
4
5
--
Rubber Mat Strap
Rubber Wheel (8-1/4" O.D. x 5/8" Bore)
Only present on models with SN 924681 to Present
8A
9
1030611
--6340A
10
54498
REF NO 8A (See note below)
REF. NO.
Incline Flight Tail Stub
f/8" (1" x 6" long)
DESCRIPTION
1010659
1010660
Incline Tube
f/8" Standard
f/8" with Corn Screen
1018135
50200
52805
52806
Incline Flight
f/8" (1/4” Flighting) (125-7/8" long)
Replacement Flight Bushing lower
Replacement Flight Bushing upper
835198
Corn Screen Cover
f/8"
835199
Cover Band
f/8"
1013763
Swivel Spout
f/8"
12
13
14
15
16
1015281-1 Upper Gearbox
17
1005889
Rubber Sleeve
f/8"
1006564
Cover Strap
f/8"
18
19
20
-6/30
05-2012
PART NO.
11
Washer 1-1/8” O.D. x 5/8” I.D.
U-Joint
f/8" (1" Bore x 5" long) (4N)
Page PB- 36
-1005891
Incline Flight to Tail Stub
Stub Bolt Kit
f/8"
90040
Snap Fastener for Door
1028821
03188A1
Control Panel Kit (accessory)
02565A1-P4
03468A1
PB 1028539-PB 36
PARTS LIST
Page PB- 37
10” SWING AWAY
9
8
10
16 17
12
10
20
27
19
7
25
6
21
26
15
14
1
23
2
11
3
4
5
Assembly View
of Incline Flight & Stub
13
18
Connects
to U-joint
24
22
Ref.
No.
Part
No.
Ref. Part
No. No.
1
1036638 Swing-out Hopper f/ 10” Models
2
1036563 Flight, 1/4” f/ 10” Hopper
3
3029A2
14 1027527-160
14 1028887-160
Incline Tube (10” Models)
Incline Tube w/ Corn Screen
(10” Models Only)
15 1023555
Flight, Incline (1/4”) f/ 10”
Flangette f/ 1 1/4” Bearing (10” Models)
4
1024761 Bearing, 1 1/4” Bore (10” Models)
16 1013764
17 1015281-3
6
1013714 Stub, Bearing (10” Models)
18 1005890*
Swivel Spout f/ 10” Models
Gearbox, Upper (f/ 8” & 10”)
Rubber Sleeve f/ 10” Models
7 1027498 Bearing Hanger (10” Models)
- - 8379C
•Bronze Bushing, 1 1/4”
19 1010261
20 90040
Strap f/ Lid (10” Models)
Snap Fastener for Spout Door
8
21 1027698
- - 1035052
U-Joint (12R) 10” Models
22 33137*
Nut, 7/16-14 Nylon Lock, f/ 10”
23 33199*
Bolt, 7/16-14 x 3 1/2” f/ 10”
1010334 Lid w/ Hinge (10” Models)
9 1028188 Hopper Belting (10” Models)
10 1013680 Clip, Belt Retaining
11 1004358 Wheel, 8 1/4” O.D.
12 1013676 U-Joint, 1 1/4” Bore (6N) 10” Models
-- 40523
U-Joint Cross Repair Kit (6N)
13 1013684 Stub, Incline Flight (10” Models)
24
25
26
27
33024*
1001985
106445
106446
Washer, 3/8” Flat f/ 10”
Decal, Danger: Rotating Auger
Corn Screen (10” Models Only)
Band, Screen Cover (10” Only)
• Indented Parts Names Indicate these Parts
are Included in the Previous Assembly.
05-2012
03188A1A
PB 1028539-PB 37
PARTS LIST
10” SWING AWAY
REF. NO.
1
REF NO 8A & 11 (See note below)
PART NO.
1027499
DESCRIPTION
Swing-out Hopper 3- Wheel
2
--1036563
1030643
Hopper Flight
f/10" (1/4" Flighting) (59-1/2" long)
2A
3029A2
Flangette for 1-1/4" Bearing
2B
1024761
1024014
Bearing - 1-1/4" Bore (Ball Bearing)
Bearing - 1-1/4" Bore (Wood)
2C
--1027506
Flight Tail Stub
f/10" (1-1/4" x 7-3/4" long)
3
--1010334
Lid w/Hinge
f/10"
13
4
--1013714
Bearing Stub
f/10" (1-1/4" x 7-1/2" long)
14
5
--1027498
8379C
Bearing Hanger w/Bearing
f/10" (1-1/4" Bore)
1-1/4" Bronze Bushing only
15
6
--1028188
Rubber Mat
f/10” (15’-2” long)
7
8
1013680
1004358
Rubber Mat Strap
Rubber Wheel (8-1/4" O.D. x 5/8" Bore)
--
8A
1030611
Washer 1-1/8” O.D. x 5/8” I.D.
9
--
--1013676
40523
10
U-Joint
f/10" (1-1/4" Bore x 5" long) (6N)
U-Joint Cross Repair Kit (6N)
Incline Flight Tail Stub
1013684
05-2012
Page PB- 38
REF. NO.
11
PART NO.
DESCRIPTION
Incline Tube
1027527-160
f/10" Standard
1028887-160
f/10" w/Corn Sreen
1028887-160
f/10” w/Corn Screen
Only present on models with SN 914303 to SN 924680
1010662
f/10” w/Corn Screen
12
106445
Incline Flight
f/10" (1/4" Flighting) (132-3/16" long)
Replacement Flight complete length
for repladement of 1023555 flight
ribbon only.
Corn Screen Cover
f/10"
106446
Cover Band
f/10"
1013764
Swivel Spout
f/10"
1023555
53859
53859 - 130
16
1015281-1
17
1005890
Rubber Sleeve
f/10"
1010261
Cover Strap
f/10"
18
19
Upper Gearbox
-1005892
Incline Flight to Tail Stub
Stub Bolt Kit
f10"
20
21
90040
1022404
--
1028821
Control Panel Kit (accessory)
6/30
03188A1
02565A1-P4
03468A1
f/10" (1-1/4" x 5-3/4" long)
Snap Fastener for Door
10" Flight to Gearbox Bolt Kit
w/UHMW Sleeves
PB 1028539-PB 38
PARTS LIST
Page PB-39
8” & 10”
GEARBOX COMPONENTS
14
Complete Gearbox Part No. 1015281-3
Upper Gearbox Mounted in
the Incline Tube Spout
13
Ratio: 1:1 Reducer
15
9
2
4
8
1
6
6
7
11
12
12
6
9
3
11
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
5
10
5
14
Part
No.
1041209
1041390
1041398
1041399
1041211
1041197
1041198
1041199
1041206
1041393
1041196
1041200
1041202
1041204
1041210
5
Description
Housing, Mach R20A Tap 68°
Housing, Mach R20A thru 1/8” Plug
Stub Shaft/Gear
Cross Shaft/Gear
Bearing Cone (Peer No. LM67048) 1.250” dia.
Bearing Cup (Peer No. LM67010) 2.328” dia.
Bearing Cone (Peer No. JL69349) 1.4961” dia.
Bearing Cup (Peer No. JL69310) 2.4803” dia
Seal, 1.25-2.00-.312 (R) TC
Seal End Cap (2.00-.312)
Retaing Ring, External, 1.250”
Bearing Thrust Washer (No. TRB2031)
Bolt, 3/8-16 x 1 1/2” SHCS
Plug, 1/4-18 NPT SCHD W/3M
Vent Plug, 1/8-27 5PSI
02182A6A
05-2012
PB 1028539-PB 39
PARTS LIST
Page PB- 40
GEARBOX
COMPLETE PART NO. 1015281-1
UPPER GEARBOX MOUNTED
IN THE INCLINE TUBE SPOUT
(USED ON 8” & 10” GEAR DRIVE
SWING-AWAY AUGER)
OUTPUT
SHAFT
SPECIFICATIONS:
RATIO: 1.18 TO 1
INPUT SHAFT: 1-1/4” DIA.
OUTPUT SHAFT: 1-1/4” DIA.
This gearbox is purchased from
Weasler. The work “CHINA” will
be inscribed on the housing.
This gearbox is purchased from
Weasler. The work “CHINA” will
be inscribed on the housing.
INPUT
SHAFT
REF.
NO.
REF.
DESCRIPTION
PART NO.
NO.
DESCRIPTION
PART NO.
IF ANY OF THE ITEMS LISTED BELOW IN BOLD TYPE AND HAVE A NA LISTED IN FRONT OF THE PART NUMBER THEY
CANNOT BE PURCHASED FOR REPLACEMENT PARTS. IF ANY OF THESE ARE REQUESTED PLEASE SUBSTITUTE A
COMPLETE GEARBOX PART NO. 1015281-1
1
Case
NA/1023523
13
Shim .003
40382
2
Quill
NA/1023524
14
Shim .005
40381
3
End Cap f/Shaft
NA/1023525
15
Shim .014
40380
8
End Cap- Solid
NA/1023526
16
Seal (Nat. # 471808)
1023278
10
Gear 68° Cut - 17 tooth
NA/1023284
17
Seal (Nat. # 470163)
1023279
18
Shaft Output
NA/1023529
20
Square Key 1/4" x 7/8" long
020153
19
Shaft Input
NA/1023528
21
Woodruff Key #809
837029
24
Gear 68° Cut - 20 tooth
NA/1023283
22
1015290
4
Brg. Cone
3079R1
23
1/8" NPT Solid Plug
035913
5
Brg. Cup
3148R1
Not Shown
6
Spacer (.127 thick)
7
Snap Ring
9
Shim .007 x 1.25 I.D.
11
O-Ring (3.15" O.D.)
12
5/16" x 3/4" NC Capscrew
--
5/16" Lockwasher
1/4" Plug (NPT Pipe)
020009
1023533
003538
1005459
1023282
4701-1
33144
02182A6
05-2012
PB 1028539-PB 40
PARTS LIST
Page PB- 41
SIDE DRIVE KIT
REF. PART
NO. NO.
1
1027696
DESCRIPTION
.
Pin Stop Type PTO Driveline
(See Page PB-42 for parts breakdown.)
Gearbox (w/1-1/2" Input Shaft)
(See page PB-43 for parts breakdown.)
2
1013973
3
3199A1
1017967
#60 Flex Coupler Half 1-1/4" Bore - (For 8" Models)
#80 Flex Coupler Half 1-1/4” Bore - (For 10” Models)
4
3146A91
41051
#60 Flex Coupler Connecting Chain - (For 8" Models)
#80 Flex Coupler Connectin Chain - (For 10” Models)
5
6
7
8
9
1014031
1027665
1014030
862113
--1003211
1003212
Support Strap
Jack Mount Bracket
Gearbox Mount
Shield f/PTO Driveline to Gearbox Connection
PTO Driveline Support
f/8" Units
f’10” Units
10
--5033A1
5035A1
Half Band f/PTO Driveline Support (2" wide)
f/8" Units
f/10” Units
11
12
13
14
15
16
17
3338A1
5169B1
4049A1
3060A1
1011554
1027668
1027667
Retaining Pin f/PTO Driveline Support
Square Drive Key 1/4" x 1-1/4" long
Square Drive Key 3/8" x 1-1/2" long
3/8" U-bolt
Support Stand
Attachment Plate for Jack Mount Bracket
Spacer for Jack Mount Bracket
0400068
05-2012
PB 1028539-PB 41
PARTS LIST
Page PB- 42
PTO DRIVELINE FOR THE SIDE DRIVE KIT
AUGER
END
TRACTOR
END
drivelines can also be purchased
directly from:
Weasler Engineering, Inc.
P.O. Box 558
West Bend, WI 53095
REF.
NO
-1
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
PTO Driveline Complete
Roll Pin 1/4" x 1" long
Inner Safety Sign
Shield Nylon Bearing Kit
Inner Guard
U-Joint Cross Repair Kit
End Yoke
Shear Bolt & Nut Kit (See Note)
Outer Guard
Outer Safety Sign
U-JOINT TYPE - 35R
AUGER END 1-1/2” BORE
WITH 3/8” KEYSEAT
TRACTOR END 1-3/8 - 6B SPLINE
WITH SHEAR BOLT
HUTCHINSON/
MAYRATH
PART NO.
1027696
1028781
1003691
13-10022
1028784
1028785
WEASLER
PART NO.
242-22829
92-22829
11-10454
13-10022
19-15126
96-22829
1028783
1028787
33170
1028782
03-10045
35041-1572
11-10215
93-22829
1028788
1018892
1028789
1028786
26-15120
-40-30011
97-22829
13-10021
13-10021
Note: Shear Bolt Kit includes (6) 3/8" - 16 x 1" long Grade 8 hex bolts and locknuts.
01972A3
05-2012
PB 1028539-PB 42
PARTS LIST
Page PB- 43
PTO DRIVELINE FOR THE SIDE DRIVE KIT
GEARBOX
(Complete Part No. 1013973)
OUTPUT
SHAFT
INPUT
SHAFT
IF ANY OF THE ITEMS LISTED BELOW IN BOLD TYPE AND HAVE A NA LISTED IN FRONT OF THE
PART NUMBER THEY CANNOT BE PURCHASED FOR REPLACEMENT PARTS. IF ANY OF THESE
ARE REQUESTED PLEASE SUBSUTE A COMPLETE GEARBOX PART NO. 1013973.
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
Not Shown
Not Shown
Not Shown
05-2012
QTY.
REQ’D.
1
1
1
1
2
2
2
2
1
1
1
9
1
1
PART
NO.
NA/1006227
NA/1006226
NA/1014355
NA/1014359
1014364
1014365
1006224
1014366
1014367
1014368
1014369
1006232
1006230
1006231
DESCRIPTION
Housing Casting
Housing Casting
Pinion Shaft/Gear Assembly
Cross Shaft/Gear Assembly
Bearing Cone
Bearing Cone
Bearing Cup
Bearing Cone
Seal, 1 1/2"
Seal, 1 3/8"
Retaining Ring, 1 1/2”
Bolt 3/8" NC x 2 1/4" HHCS
1/2" Pipe Plug
1/2" Vent Plug
1013973P
PB 1028539-PB 43
PARTS LIST
Page PB- 44
05-2012
PB 1028539-PB 44
P.O. Box 629 514 W. Crawford Clay Center, KS 67432
Phone 785-632-2161 1-800-523-6993 FAX 785-632-5964

PB1028539 - Hutchinson Mayrath

Transcription

Similar documents

PARTS BOOK - Hutchinson Mayrath