HB17 HIGHBANKER/ DREDGE COMBO ASSEMBLY INSTRUCTIONS

HB17 HIGHBANKER/ DREDGE COMBO ASSEMBLY INSTRUCTIONS

P.O. Box 1139
615 Cass St. Owosso, MI 48867
www.honcoophighbaker.com
Toll Free Phone: 1-888-988-2122
Phone: 1-989-723-3404
Email: Honcoopgold@earthlink.net
HB17 HIGHBANKER/ DREDGE COMBO
ASSEMBLY INSTRUCTIONS
P.O. Box 1139
615 Cass St. Owosso, MI 48867
www.honcoophighbanker.com
1-888-988-2122
HONCOOP HIGHBANKER
Attach the 4 legs (heavy wall
tubing to the back of the
highbanker).
Page 2
Page 23
1-888-988-2122
For a quickie cleanup, lift the
dredge tray and turn it so it rests
across the Highbanker. This is to
allow access to the Highbanker
punch hole screen and black rib
mat. Wash the moss and black
ribbed mat into the pan.
Page 22
HONCOOP HIGHBANKER
Set the header box assembly
onto the rear of the highbaner
using the 4 Phillips screws.
Page 3
1-888-988-2122
Attach the header box support
legs, with PVC support bracket
as shown (use picture as
example).
Page 4
HONCOOP HIGHBANKER
The thumb screw releases the
punch hole screen for a quickie
clean up.
Page 21
1-888-988-2122
The dredge tray is slid forward
just enough to catch the water
flow off of the water diverter.
Page 20
HONCOOP HIGHBANKER
Attach the PVC assembly with
the two unions, as shown.
Page 5
1-888-988-2122
Attach the PVC assembly bracket
with the two Phillips screws.
Page 6
HONCOOP HIGHBANKER
Place the dredge tray on top of
the cross bars of the lower riffle
tray.
Page 19
1-888-988-2122
Attach the 10’ long, 2” suction
nozzle hose to the header box
barbed hose fitting and the pressure
hose to the PVC manifold.
Page 18
HONCOOP HIGHBANKER
Attach the garden hose and the
pin lug hose fitting onto the PVC
assembly.
Page 7
1-888-988-2122
Swing the punch hole screen
hold down lever into position.
Page 8
HONCOOP HIGHBANKER
Reattach the garden hose and
whip hose to the PVC manifold.
Page 17
1-888-988-2122
HONCOOP HIGHBANKER
HB17
Dredge Combo
Assembly
Reattach the PVC manifold bracket.
Page 16
Page 9
1-888-988-2122
Remove the two screws from the
cover plate.
Page 10
HONCOOP HIGHBANKER
Reattach the PVC ball valve onto
the bottom of the PVC dredge
manifold then screw the PVC
union to the PVC union together.
Page 15
1-888-988-2122
Remove the two plastic plugs
and mount the small water
diverter with the two Phillips
screws. This diverter feeds the
dredge tray.
Page 14
HONCOOP HIGHBANKER
Place the barbed hose fitting as
shown, attach with two screws.
Page 11
1-888-988-2122
Remove PVC Highbanker
manifold bracket, and unscrew
the two PVC unions.
Page 12
HONCOOP HIGHBANKER
Then unscrew the lower ball
valve from PVC manifold.
Page 13