Pro Audio Accessory Catalog

Transcription

Pro Audio Accessory Catalog
2011
Professional
Audio Accessories
Catalog
replacement diaphragms
2
replacement diaphragms
TEI has the voice coil you are looking for. We carry quality replacement voice coils for EV, JBL, Peavey, etc.
ask your TEI representative, we have it!
31-RK850
31-RK3545
Specifications:
• 8 ohm • Diaphragm diameter 4 ¼” (108-mm)
• Voice coil 2 7/8” (73-mm) Aluminum edge-wound
• Titanium dome • Spring loaded terminals
Replacement for: Pro Beat, BNC and Mackie, RCF.
Specifications:
• 8 ohm • Diaphragm diameter 2 ¾” (70-mm)
• Voice coil 1.75” (44-mm) Copper edge-wound
• Titanium dome • Spring loaded terminals
Replacement for: Mackie - Behringer - Cerwin Vega - EAW - Gemini
and Turbo Sound
31-RK990
21-2445 / 21-2445-16
Specifications:
• 8 ohm • Diaphragm diameter 5” (127-mm)
• Voice coil 3 7/8” (100 -mm) Aluminum edge-wound • Titanium dome
Replacement for: Pro Beat and JBL
Specifications:
• 8 ohm / 16 ohm • Diaphragm diameter 5” (127-mm)
• Voice coil 3 7/8” (100-mm) Aluminum edge-wound • Titanium dome
Replacement for: JBL - Radian and Peavey
31-EVDH1
31-RK720
Specifications:
• 8 ohm • Diaphragm diameter 4 ¼” (105-mm)
• Voice coil 2 7/8” (72-mm) Aluminum edge-wound • Titanium dome
Replacement for: Electro-Voice
Specifications:
• 8 ohm • Diaphragm diameter 4 ¼” (105-mm)
• Voice coil 3” (75-mm) Aluminum edge-wound • Titanium dome
Replacement for: JBL - Radian and Peavey
31-VC50
21-2418
Specifications:
• 8 ohm • Diaphragm diameter 2” (50-mm)
• Voice coil 1 ¼” (34-mm) Aluminum edge-wound • Titanium dome
Replacement for: Electro-Voice
Specifications:
• 8 ohm • Diaphragm diameter 3” (77mm)
• Voice coil diameter 13/4” (44mm)
• Copper edge-wound coil • Titanium dome
Replacement for: JBL – 2418H
21-2516
21-VC101
Specifications:
• 8 ohm • Diaphragm diameter 2 9/16” (-mm)
• Voice coil 1.75” (44-mm) Aluminum edge-wound
• Polyurethane dome • Spring loaded terminals
Replacement for: BNC DE250,DE160 Specifications:
• 8 ohm • Diaphragm diameter 1 3/4” (45-mm)
• Voice coil 1” (25-mm) Copper edge-wound
Replacement for: Foster – N30, 025H30, 025H27 ,H25N30, FT300H,
PAS, Carvin, Yamaha, P-Audio, Peavey
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
31-RK450 / 21-2425
21-2422
Specifications: • 8 ohm • Diaphragm diameter 4 3/8” (110-mm)
• Voice coil 1 3/4” (45-mm) Aluminum edge-wound • Titanium dome
Replacement for: Pro Beat and Altec
Specifications: • 8 ohm • Diaphragm diameter 3¼” (83-mm)
• Voice coil 2” (50-mm) Copper edge-wound • Titanium dome
Replacement for: Peavey
31-VC30
31-RK330
Specifications: • 8 ohm • Diaphragm diameter 2 11/16” (68-mm)
• Voice coil 1” (25-mm) Aluminum edge-wound • Titanium dome
Replacement for: Pro Beat and JBL
Specifications: • 16 ohm • Diaphragm diameter 3 ½” (88.9-mm)
• Voice coil 1” (25-mm) Copper edge-wound • Titanium dome
Replacement for: Pro Beat, Eminence and Yamaha
31-RK407
Specifications: • 8 ohm • Diaphragm diameter 2 ¼” (57-mm)
• Voice coil 1” (25-mm) Copper edge-wound • Titanium dome
Replacement for: KLIPSCH
21-2404 / 31-RK155
Specifications: • 8 ohm / 16 ohm • Diaphragm diameter 3” (75-mm)
• Voice coil 1 ¾” (45-mm) Copper edge-wound • Titanium dome
Replacement for: Pro Beat and JBL
31-RK405
31-RK165
Specifications: • 8 ohm • Diaphragm diameter 1 ¾” (45-mm)
• Voice coil 1” (25 -mm) Copper edge-wound • Phenolic dome
Replacement for: Foster, Fostex, Ampeg, Yamaha, Carvin,
Crate and Roland
Specifications: • 8 ohm • Diaphragm diameter 5 ¼” (107mm)
• Voice coil diameter 2 7/8” (74mm)
• Copper edge-wound coil
Replacement for: Pro Beat 31-ST155, ST150 and JBL
RECONING KITS
31-2560
31-2860
Specifications:
• 8 ohm
• Cone diameter 15”
• Voice coil 4” (102-mm)
Aluminum edge-wound
Replacement for: Pro Beat and JBL
Specifications:
• 8 ohm
• Cone diameter 18”
• Voice coil 4” (102-mm)
Aluminum edge-wound
Replacement for: Pro Beat and JBL
31-2582
31-2882
Specifications:
• 8 ohm
• Cone diameter 15”
• Voice coil 3 15/16” (100-mm) Aluminum edge-wound
Replacement for: Peavey Black Widow
Specifications:
• 8 ohm
• Cone diameter 18”
• Voice coil 3 15/16” (100-mm) Aluminum edge-wound
Replacement for: Peavey Black Widow
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
reconing kits & replacement diaphragms
replacement diaphragms (Continued)
3
PROBEAT PRO AUDIO SPEAKERS / RECONING KITS
RECONING KITS (continued)
Model
31-2030
10" Recone Kit
Description
Model
31-2240
12" Recone Kit
Model
31-2540
15" Recone Kit
31-2230
12" Recone Kit
31-2528
15" Recone Kit
31-2580
18" Recone w/Basket
CONE HEIGHT:
2"
IMPEDANCE:
8ohm
POWER HANDLING: 200W
FREQ. RESPONSE:
80-5K
VC DIAMETER:
3" Aluminum
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1030
CONE HEIGHT:
2"
IMPEDANCE:
8ohm
POWER HANDLING: 200W
FREQ. RESPONSE:
80-5K
VC DIAMETER:
3" Aluminum
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1230
Description
CONE HEIGHT:
3"
IMPEDANCE:
8ohm
POWER HANDLING: 300W
FREQ. RESPONSE:
42-4.5K
VC DIAMETER:
3" Copper
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1240
CONE HEIGHT:
4"
IMPEDANCE:
8ohm
POWER HANDLING: 200W
FREQ. RESPONSE:
33-4K
VC DIAMETER:
2.5" Copper
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1528
CONE HEIGHT:
3-3/4"
IMPEDANCE:
8ohm
POWER HANDLING: 300W
FREQ. RESPONSE:
38-4K
VC DIAMETER:
3" Copper
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1540
Model
31-2845
Description
10" Recone Kit
CONE HEIGHT:
5"
IMPEDANCE:
8ohm
POWER HANDLING: 400W
FREQ. RESPONSE:
30-3K
VC DIAMETER:
3" Copper
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-1845
CONE HEIGHT:
IMPEDANCE:
8ohm
POWER HANDLING: 600W
FREQ. RESPONSE:
39-3K
VC DIAMETER:
4" Aluminum
V.C. FORMER:
Kapton
REPLACEMENT FOR: Pro Beat 31-2580
CAST ALUMINUM PRO AUDIO SPEAKERS
31-1860
18" 8 ohm 600W RMS Freq. Range 30-3K 100 oz. Magnet
4" Aluminum V.C. Reconing Kit #31-2860
31-1560
15" 8 ohm 600W RMS Freq. Range 35-2.5K 100 oz. Magnet
4" Aluminum V.C. Reconing Kit #31-2560
31-1230
12" 8 ohm 200W RMS Freq. Range 80-5K 80 oz. Magnet
3" Aluminum V.C. Reconing Kit # 31-2230
31-1030
10" 8 ohm 200W RMS Freq. Range 80-5K 80 oz. Magnet
3" Aluminum V.C. Reconing Kit #31-2030
31-1560
31-1030
STAMP METAL FRAME PRO AUDIO SPEAKERS
31-1540
15" 8 ohm 300W RMS Freq. Range 38-4K 90 oz. Magnet
3" Copper V.C. Reconing Kit #31-2540
31-1540
ECONOMY STAMP METAL FRAME AUDIO SPEAKERS
32-1020
32-1228
32-1530
32-1530
4
Description
10" 8 ohm 200W Program Power Freq. Range 70hz-8Khz.
20 oz. Magnet
12" 8 ohm 200W Program Power Freq. Range 55hz-5Khz.
20 oz. Magnet
15" 8 ohm 300W Program Power Freq. Range 40hz-4Khz.
30 oz. Magnet
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
31-ST990
31-ST720
31-ST500
31-CD30
31-ST990
31-ST330
31-CD30
31-ST330
2" Throat Titanium Bolt-on Driver 8 ohm Freq. Range 500-18Khz
125W Power Capacity. Replacement Diaphragm (RK990)
2" Throat Titanium Bolt-on Driver 8 ohm Freq. Range 800-20Khz
100W Power Capacity. Replacement Diaphragm (RK720)
2" Throat Titanium Bolt-on Driver 8 ohm Freq. Range 800-20Khz
90W Power Capacity. Replacement Diaphragm (RK850)
1" Throat Screw-on Driver 13/8" Threads Freq. Range 1.5K-20Khz
65W Power Capacity. 16 ohm Replacement Diaphragm (RK330)
1" Throat Screw-on Driver 13/8" Threads Freq. Range 1.5K-15Khz
30W Power Capacity. 8 ohm Replacement Diaphragm (VC30)
31-ST500
PRO HIGH FREQUENCY HORNS
ABS Glass Filled Poly Carbonate Horns
31-216
31-228
31-216
31-229
31-327
Pro Bolt-on Horn 12.44" x 12.44" x 5.24" Throat Diameter 11/2" Coverage Angle (H x V) - 6db: 100o x 100o Cut Off Freq. 500 hz
Pro Bolt-on Horn 10.63" x 17.5" x 7.8" Throat Diameter 2"
Coverage Angle (H x V) - 6db: 60o x 40o Cut Off Freq. 500 hz
PROBEAT PRO AUDIO SPEAKERS
PRO HIGH FREQUENCY DRIVERS
Pro Bolt-on Horn 171/2" x 11" x 91/4" Throat Diameter 2"
Coverage Angle (H x V) - 6db: 60o x 40o Cut Off Freq. 500 hz
Pro Bolt-on Horn 191/2" x 12" x 91/4" Throat Diameter 1"
Coverage Angle (H x V) - 6db: 60o x 40o Cut Off Freq. 500 hz
31-327
PRO AUDIO HORN ADAPTERS
31-2110
31-2115
Horn Adapter Converts a 1" 3 Hole Bolt-on Horn to 1 3⁄8"
Female Threads
31-2115
Converts a 1 1⁄2" or 2" Bolt-on Horn to a 1" 3 Hole Bolt on Horn
31-2111
Adapter converts 1" bolt Driver to 1 3⁄8" screw-on Driver
31-2111
31-2110
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
5
ORTOFON / SHURE cartridges & replacement stylus
6
ortofon dj cartridges
SHURE cartridges
REPLACEMENT STYLUS AND cartridges
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
EX-NTNL2FC
EX-NTNL4FC
EX-NTNL4FX
EX-NTNL8FC
EX-NTNL2MP
EX-NTNL4MP
EX-NTNL4MPR
EX-NTNL8MPR
EX-NTNLT4MP
EX-NTNLT8MP
EX-NTNL4MMX
EX-NTNL8MM
2 pole cable connector, quick lock, chuck type strain
relief for cables 6 - 10 mm
diameter.
4 pole chassis connector,
black round G-size flange,
3/16" flat tabs.
4 pole cable connector,
chuck type strain relief for
cables 6 - 10 mm diameter.
8 pole chassis connector,
nickel metal square G-size
flange, 3/16" flat tabs.
4 pole cable connector,
chuck type strain relief, dark
grey bushing
4 pole male chassis
connector, metal housing,
solder or ¼" flat tabs
8 pole cable connector,
strain relief for cables 8 - 20
mm diameter, 30A per
contact.
8 pole male chassis
connector, Nickel housing,
solder or ¼" flat tabs
2 pole chassis connector,
black D-size flange,
countersunk thru holes,
3/16" flat tabs.
4 pole chassis connector,
black D-size flange,
countersunk thru holes,
3/16" flat tabs.
4 pole lockable coupler, links 8 pole speakON coupler
two NL2/4F*s together for
cable extension.
AUDIO XLR CONNECTORS
EX-NTNC3FX
EX-NTNC3FXX
EX-NTNC3FXXB
EX-NTNC3MX
EX-NTNC3MXX
EX-NTNC3MXXB
EX-NTNC3MDL1
EX-NTNC3MDV
EX-NTNC3FDH
EX-NTNC3FDL1
EX-NTNC3FDV
EX-NTNC3FP1
3 pole female cable
connector, Nickel housing,
silver contacts
3 pole male receptacle,
solder contacts, Nickel
housing, silver contacts
3 pole female cable
connector, Nickel
housing, silver contacts
3 pole male
receptacle, vertical PCB
mount, Nickel housing,
silver contacts
3 pole female cable
connector, black metal
housing, gold contacts
3 pole female receptacle,
horizontal PCB mount,
Nickel housing, silver
contacts
3 pole male cable
connector, Nickel
housing, silver contacts
3 pole female receptacle,
solder cups, Nickel
housing, silver contacts
3 pole male cable
connector, Nickel
housing, silver contacts
NEUTRIK CONNECTORS
SPEAKON LOCKABLE SPEAKER CONNECTORS
3 pole male cable connector,
black metal housing, gold
contacts
3 pole female receptacle,
vertical PCB mount, black
metal housing, silver
contacts
3 pole female receptacle,
solder contacts, Nickel
housing, silver contacts
PRO 1/4" POWER PLUGS
EX-NTNP2C
2 pole 1/4" professional phone
plug, Nickel housing, Nickel
contacts
EX-NTNP3C
3 pole 1/4" professional phone
plug, Nickel housing, Nickel
contacts.
EX-NTNJ3FP6C-B
Locking 1/4" phone jack, D-size
shell, black metal housing and
gold contacts
EX-NTNJ3FC6
Professional locking 1/4" cable jack
for secure in-line connections.
Nickel housing, silver contacts.
EX-NTRNJ3FP6C
Locking 1/4" phone jack,
D-size shell, nickel metal
housing and silver contacts
POWER CON CONNECTORS
NAC3FCA
Cable connector
(power-in)
NAC3MPA
Chassis connector
(power-in)
NAC3FCB
Cable connector
(power-out)
NAC3MPB
Chassis connector
(power-out)
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
NAC3MM
Coupler for linking a NAC3MPA
(power in) to NAC3MPB-1 (power out)
7
pRO AUDIO CABLES/ “Y” ADAPTERS
PRO AUDIO CABLES
Dual Gold RCA Male
to Dual Gold RCA Male
13-656MC Set of 6 multicolor
3 ft 1/4" to 1/4"
BalanceD Patch Cables
NEW
60-653MXC
3 ft. XLR Male to XLR Female
Patch Cable
NEW
60-292 i-Pod Pro Audio Cable
Stereo MIni Male to Male
60-706MFN
6 ft. XLR Male to XLR Female
60-715NT
15 ft. XLR Male to XLR Female
60-725NT
25 ft. XLR Male to XLR Female
60-750NT
50 ft. XLR Male to XLR Female
60-792RAG 20 ft. Male 1/4"
to right angle Male 1/4"
“Y” Adapters
PRO
PRO
INSERT CABLE
60-705
Male 1/4" Balanced
to 2 Male Mono 1/4"
60-707
6 ft. 3 pin XLR Male
to Male TRS 1/4" Plug
60-708
6 ft. 3 pin XLR Female
to MaleTRS 1/4" Plug
NEW
60-829
8
13-672
13-681G 3 feet
13-682G 6 feet
13-683G 15 feet
6 ft. Gold 1/4" Mono Male
to RCA Male
60-19120 20 ft. 1/4" Mono Male
to 1/4" Mono Male
60-791SG
20 ft. Male 1/4"
to Male 1/4"
PRO
1/4" Mono Male to two 1/4" Mono Female
13-821 Standard 6" cable
1/4" Mono Female to two 1/4" Mono Male
13-822 Standard 6" cable
NEW
Male XLR to 2 Female XLR
60-830
Female XLR to 2 Male XLR
Stereo Mini Male to dual RCA Males
13-288 Standard 39" cable
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
STAGE SNAKES WITH CART
60-PBO850XLR
60-PBS168150RL 22 Gauge 16 x 8 x 150'
60-PBS248150RL 22 Gauge 24 x 8 x 150'
SNAKE BREAKOUTS
60-PBO850XLR
8 channel x 50 ft.
male to female XLR
60-BO1250XLR
12 channel x 50 ft.
male to female XLR
60-PBS168150RL
STANDARD STAGE SNAKES
60-PBS8450 (New) 22 Gauge 8 x 4 x 50'
60-PBS16450 (New) 22 Gauge 16 x 4 x 50'
60-PBS84100
22 Gauge 8 x 4 x 100'
60-PBS164150
22 Gauge 16 x 4 x 150'
60-PBS244150
22 Gauge 24 x 4 x 150'
60-PBS8540
MULTI CABLE TESTERDIRECT BOX
Multi Cable Tester
60-CT700
Unit is setup to test 3 Pin XLR,
5 Pin XLR, 1/4" stereo or mono,
mini 3.5m stereo or mono,
Neutrik 4 Pin, BNC and RCA
Passive Direct Box
60-PDI101
Balance XLR output jacks,
ground lift switch, input jack,
parallel feed through jack
(unbalance), and attenuator
slide switch.
pro speaker wire
60-SPC212330
12 Gauge x 2 conductors wire with rubber jacket 330 ft. spool.
60-SPC214330
14 Gauge x 2 conductors wire with rubber jacket 330 ft. spool. (New)
60-SPC414330
14 Gauge x 4 conductors wire with rubber jacket 330 ft. spool.
60-SPC412330
12 Gauge x 4 conductors wire with black rubber jacket 330 ft. spool.
60-SPC812330
12 Gauge x 8 conductors wire with black rubber jacket 330 ft. spool.
60-TL1250
60-TL1250 Female 4 pin twist lock to female 4 pin twist lock 50 ft.
PROBEAT STAGE SNAKES/PRO SPEAKER WIRE
Stage snakes
60-JB1250
60-JB1250 1⁄4" male to 1⁄4" male jumbo 12 gauge 50 ft.
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
9
PRO XLR CONNECTORS / AUDIO ADAPTERS / CABLES
PRO XLR CONNECTORS AND ADAPTERS
PRO XLR CONNECTOR
60-372MC
60-082 Male XLR to Male 1⁄4" balance
60-373FC
60-370F MIKE CABLE ADAPTERS
60-081 Female XLR to Male 1⁄4" balance
3 pin Male
Chassis Mount XLR
60-371M 3 Pin Male XLR
3 pin Female
Chassis Mount XLR
3 Pin Female XLR
60-076 3 pin Male XLR to 1⁄4" mono Female
AUDIO ADAPTERS
13-575 -Gold
RCA Female Coupler
13-275G
Dual RCA Coupler
13-242
Stereo Mini Male to
Stereo 1/4" Female
13-236MD
1
/4" Female Coupler
13-290
Mini Stereo Male to
Dual Females Stereo
13-235 - Metal
13-239 - Molded
1
/4" Male To RCA Jack Adapter
AUDIO CONNECTORS
12-606
/4" Right Angle - Male Mono
1
12-618
Gold - Male RCA Plug
13-681G 3 feet
13-682G 6 feet
13-683G 15 feet
10
PRO Chassis Mount
XLR Connector
12-685
/4" Stereo Male - Gold Tip
1
12-604
/4" Mono Male - Gold Tip
1
12-500GBK
12-200GR
12-200GBK
Gold - Black
Gold - Economy Type Dual - Banana Plug
Dual Gold RCA Male
to Dual Gold RCA Male
NEW
12-502
/4" Jumbo Mono Male
1
12-500GR
Gold - Red
Jumbo Dual Banana Plug
60-292 i-Pod Pro Audio Cable
Stereo MIni Male to Male
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
PRO MIKE CABLES
3 pin XLR Male to 3 pin XLR Female
20 Ga. x 2 cond. 95% braided shield
20 Gauge Dual Conductor
with 95% Braided Shield
60-IMP500DM 500 ft.
Weight: 15 lbs.
60-653MXC 3 ft. Cable
60-706MFN 6 ft. Cable
60-715NT 15 ft. Cable
60-725NT
60-750NT
60-IMP250DM 250 ft.
Weight: 8 lbs.
25 ft. Cable
50 ft. Cable
microphone STANDS AND ACCESSORIES
60-170BK5 - Black
60-1705 MC - Red, Blue, Yellow, & Green
60-3093
TEI Mike Stand
with Round Base
And Boom
60-060
Desk Mike Stand
Tripod Type 5/8" thread
11/2" in Diameter x 2 3/4" Height
60-101
Universal Microphone Clip
with Brass thread.
Color: Black
Height: 33" to 60"
Boom: 32V
Weight: 12 lbs
60-103
Mike Swivel Mount
Brass Insert Adjustable 5/8"
60-063
13" Gooseneck with 5/8" thread
60-069
19" Gooseneck with 5/8" thread
60-213
13" Gooseneck with Male & Female
3 Pin XLR Connectors
60-302
Desktop Mike Stand
Adjustable.
Height: 9- /2" - 16"
Base: 6" Diameter
1
60-BG3030
Mike Stand Bag
Color: Black
Material: Nylon
60-061
Chrome
Gooseneck Base
with 5/8" thread
microphone CABLES / STAND / accessories
microphone cables
60-061BK Black
85-BG3032
Universal Bag
Designed for Sound and Lighting
Professionals. For storage and safe
transportation of your valuable products.
Color: Black
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
Material: Nylon
11
CAMLOCK CONNECTORS / ADAPTERS
Inline 400A Connectors
83-CL40FB
83-CL40MB
83-CLS40FB
83-CLS40MB
• 2 piece Hard shell design for easy assembly.
• Offers superior durability and safety.
• 400 Amp/600 Volt
• Cable size 2/0 to 4/0
• Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•2 piece Hard shell design for easy
assembly.
•Offers superior durability and safety.
•400 Amp/600 Volt
•Cable size 2/0 to 4/0
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•400 Amp/600Volt
•Solid Santoprene boot weatherproof.
•Non-conductive retaining screw.
•Cable size 2/0 to 4/0.
•Assemble with simple hand tools.
•CLS connectors mate with all cam type
connectors.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•400 Amp/600Volt
•Solid Santoprene boot weatherproof.
•Non-conductive retaining screw.
•Cable size 2/0 to 4/0.
•Assemble with simple hand tools.
•CLS connectors mate with all cam type
connectors
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
Female Brass Inline Hard Shell Cam-lock Male Brass Inline Hard Shell Cam-lock
Female Inline Brass cam-lock
Male Inline Brass cam-lock.
CHASSIS MOUNT 400A Connectors
83-CL40FRB
83-CL40MRB
83-CL40FRSB
83-CL40MRSB
•400A/600V, Cable size 2/0 to 4/0.
•Mounting holes are drilled to accept #10 bolts.
•Super Tough nylon housing. UV resistant.
•Will not chip or crack under extreme
temperature.
•Self tapping SS mounting screws.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•400A/600V, Cable size 2/0 to 4/0.
•Mounting holes are drilled to accept #10 bolts.
•Super Tough nylon housing. UV resistant.
•Will not chip or crack under extreme
temperature.
•Self tapping SS mounting screws.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•400A/600Volt
•Mounting holes are drilled to accept #10 bolts.
•Super Tough nylon housing. UV resistant.
•Will not chip or crack under extreme
temperature.
•Self tapping SS mounting screws.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•400A/600Volt.
•Mounting holes are drilled to accept #10 bolts.
•Super Tough nylon housing. UV resistant.
•Will not chip or crack under extreme
temperature.
•Self tapping SS mounting screws.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
Female Panel Mount Brass w/double set
screw
Male Panel Mount Brass w/double set
screw
Female Panel Mount Brass w/threaded
stud
Male Panel Mount Brass w/threaded
stud
INLINE/CHASSIS 150A CONNECTORS
83-CLM2F
83-CLM2M
83-CLMFR2
83-CLMMR2
•Solid Santoprene boot, weatherproof.
•150 Amp/600 Volt Brass double set screw.
•Cable size #8 to #2.
•Santoprene housing w/nylon retaining screw.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•Solid Santoprene boot, weatherproof.
•150 Amp/600 Volt Male Inline "mini" cam-lock.
•Brass w/double set screw.
•Cable size #8 to #2.
•Santoprene housing w/nylon retaining screw.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•150A/600Volts Brass threaded stud.
•Cable size #8 to #2
•Super Tough Nylon Housing, UV resistant.
•Self Tapping SS mounting screws.
•Mounting Holes are drilled to accept #10 bolts.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•150A/600Volts Brass threaded stud.
•Cable size #8 to #2
•Super Tough Nylon Housing, UV resistant.
•Self Tapping SS mounting screws.
•Mounting Holes are drilled to accept #10 bolts.
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
Female Inline "mini" cam-lock
Male Inline "mini" cam-lock
Female Panel Mount "mini" cam-lock
Male Panel Mount "mini" cam-lock
CAMLOCK ADAPTERS
83-CA3ME
83-CA3F
83-CLT2M
83-CLT2F
Available in Black, White, Red, Blue, and
Green.
Available in Black, White, Red, Blue, and
Green.
Available in Black, White, Red, Blue, and
Green.
Available in Black, White, Red, Blue, and
Green.
1 Female to 3 - Way Male adapter 400A.
12
1 Male to 3 - Way Female adapter 400A. 1 Female to 2 Male adapter 400A.
1 Male to 2 Female adapter 400A
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
83-CDFF
83-CDMM
CL40WTC-L-125
CL40WTC-L-187
•Couples together two male terminated ends
•400A/600V Adapter
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•Couples together two female terminated
ends
•400A/600V Adapter
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•For all 400A cam-type Rear panel mounts.
•Weatherproof stainless steel, thermoplastic
spring hinge cover
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
•For all 400A cam-type Front panel mounts.
•Weatherproof stainless steel, thermoplastic
spring hinge cover,
•Colors: A-Black, B-White, C-Red, D- Blue,
E-Green
Double Female Cam-lock Adapter
Double Male Cam-lock Adapter
83-CAMLOCKPLATE
Snap Back Plastic Cover *3R Rated
Snap Back Plastic Cover *3R Rated
83-CLSPRESS
19" Rack Mount panel for 5 camlock connectors
CLS Inline Cam Pressing Tool
DMX CABLES / ADAPTERS
Premade Pro
DMX Cables
83-TEIDMX3C330
Bulk 22ga. X 2 conductor with a 95% braided shield.
Black rubber jacket, 330’ per roll.
83-TEIDMX5C330
Bulk 22ga. X 4 conductor with a 95% braided shield.
Black rubber jacket, 330’ per roll.
83-AD3M5F
5 Pin Female XLR to
3 Pin Male XLR Adapter
83-AD5M3F
3 Pin Female XLR to
5 Pin Male XLR Adapter
3PIN Male to Female
XLR connectors,
22ga. x 2 Conductors
with 95% braided shield.
Available in the following sizes:
83-TEIDMX63 - 6'
83-TRIDMX253 - 25'
83-TEIDMX753 - 75'
83-MDMX
83-TEIDMX153 - 15'
83-TEIDMX503 - 50'
83-TEIDMX1003 - 100'
83-FDMX
5 Pin Male Inline XLR
5 Pin Female Inline XLR
PRO WIRELESS DMX SYSTEM
85-06250 - Transmitter
PRO DMX SPLITTER
85-DMX81
TEI is proud to introduce our new professional (8) eight output / (2) two input DMX splitter. This is definitely a tool that
no production company, programmer, or DJ should be without. Each of the outputs of this device are optically isolated
to guarantee great performance while also protecting your
equipment from unnecessary mishaps, and also keeping all
your fixtures organized.
SPECIFICATIONS:
• Input’s: (2) 3pin XLR inputs 1M/1F
• Output’s: (8) 3pin XLR Female
• Input Voltage: 100V-240V, 50/60Hz
• Power consumption: 26W at 100% output
• Size: 10.90" L x 5.70" W x 2.75" H / 277 x 145 x 70 mm
• Weight: 4.4lbs./2kgs.
85-06251 - Receiver
TEI is proud to introduce our new professional wireless DMX512 receiver and
transmitter system. Both units operate on the reliable 2.4 Gigahertz frequency
and allow the operator up to 1000’ line of sight seamless transmission. Both the
transmitter and receiver are very compact in size making this system the perfect
system that no production company, programmer, or DJ should be without. For
more information on this products contact your TEI representative today. Receivers and transmitters are sold separately.
SYSTEM SPECIFICATIONS:
•
•
•
•
•
•
•
•
•
•
•
Transmitter Input DMX Signal Port: (1) 3pin Chassis Mount Male XLR
Receiver Output Signal Port: (1) 3pin XLR Female Inline Connector
Maximum System Communication distance: 1000’ Line of sight
Operating Frequency: 2.4Ghz ISM, 512Channels (Frequency Section)
Max. Simultaneous DMX Groups Permitted: (7) Total
Maximum transmitting power rate: 20dBm
Input Voltage: 5VDC 500ma for both Receiver and Transmitter
Transmitter Size: 2.5."H x 4.50"L x 2.5"D / 63.5 x 114.3 x 63.5mm
Receiver Size: 0.75"H x 4.75"L x 0.75"D / 19.05 x 120.65 x 19.05mm
Transmitter Weight: 0.50 lbs./.227 kgs. Approx
Receiver Weight: 0.18 lbs./.082 kgs.
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
CAMLOCK ADAPTERS/ACCESSORIES/DMX CABLES/ADAPTERS
CAMLOCK ADAPTERS / COVERS
13
AC / CAMLOCK PLATES AND CONNECTORS
EDISON/SOCAPEX/STAGE PIN CONNECTORS AND ACCESSORIES
83-SOCA4
83-ACPLATE12
19” Rack mount AC panel for 12 single gang
outlets.
STAGE PINS
Socapex 19” rackmount panel accommodates
4 male or female chassis connectors.
83-EDSPXPLATE
19” Rack mount panel accommodates 2-socapex
and 6 single gang AC outlets.
Panel Mount Socapex
AC Connectors
Twist Lock Connectors
83-C19SM
83-206CBL
L6-20A 3-pin
Female inline
83-MSP
Male 20 amp. Stage Pin
83-306CBL
L6-30A 3-pin
Female inline
83-206PBL
L6-20A 3-pin
Male inline
83-306PBL
83-SPCHF
L6-30A 3-pin
Male inline
Female 20 amp. Panel Mount
19" Pin male chassis
mount connector.
83-C19SF
19" Pin female chassis
mount connector.
83-MLRPATCH
Female 19 pin chassis
socapex connector
with 36" 12ga. leads.
Inline Socapex
83-C19LFL
19" Pin inline
female connector.
83-206FO
L6-20A 3-pin
Female chassis
83-306FO
L6-30A 3-pin
Female chassis
83-FSP
Female 20 amp. Stage Pin
83-C19LML
19" Pin inline
male connector.
Socapex Cables
3-Pin Edison Connectors
83-5269
15A U-ground
Female inline
83-STGPLATE
19” Rack mount panel for 12 stage pin
connectors.
83-5266
15A U-ground
Male inline
TEI’s super flexible multiconductor socpaex type cables are
American made and available is assorted lengths in either
14/14, 14/19, 12/14, or 12/19 cable.
Breakins / Breakouts
83-MSP100
Bates 100 Amp 125V Male Stage Pin
Connector
• 100Amp Double Set Screw (Standard)
• Impact resistant case
• Thermal resistant (500°F) nylon material.
14
83-5352
20A/125V Duplex A/C Outlet
TEI’s breakin and breakout cables are available in 1K or 2K
versions in standard 6’ lengths and terminated in either
edison, twistlock, or stagepin male or female connectors.
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
22-CR45ANG
45° Corner Unit
22-CR36
22-CREND
36" Heavy Duty Cable Ramp
Can hold up to 6000 lbs.
End Ramp
22-EC36R
36" Light-Duty cable ramp.
5 cable measuring 13⁄16 "Anti-slip ribbed surface.
CABLE RAMPS/SHELVES AND PANELS
Blank Rack Panels
Utility Shelves
Provide a quick and easy method for
rack mounting equipment that cannot
normally be mounted in a rack
Order #
For use in making custom panels & patch bays
or to fill empty spaces in racks. They are made
of steel with flanges on the top and bottom for
extra strength
Rack Height Shelf Width Depth Wt. Capacity Weight
Spaces mm/inch mm/inch mm/inch
kg/lb
kg/lb
22-2084
1
2
3
4
2-2085
2
22-2086
22-2087
44.4/1.75
88.9/3.50
133/5.25
178/7.00
441/17.38
441/17.38
441/17.38
441/17.38
279/11.00
279/11.00
375/14.75
406/16.00
16/35
23/50
34/75
41/90
Horizontal Slot Vent Panels
Steel rack panels prepunched with horizontal slots
to allow air to circulate in rack enclosure
Available in two size to fit one or two rack spaces
Order #
Rack Material Color
Space
22-2098
22-2099
1
2
steel
steel
Height
mm/inch
black 44.4/1.75
black 89/3.50
Order #
2.1/4.6
2.4/5.3
3.6/8.0
4.5/10.0
Width
mm/inch
Weight
kg/lb
483/19
483/19
.29/63
.47/1.05
22-2088
22-2089
22-2090
22-2091
Rack Material Color
Spaces
1
2
3
4
steel
steel
steel
steel
mm/inch
Height
Width Weight
kg/lb
kg/lb
black 44.4/1.75 483/19 .36/.80
black 88.9/3.50 483/19 .64/1.40
black 133/5.25 483/19 .95/2.10
black 178/19 483/19 .27/2.80
XLR
CABLE RAMPS/SHELVES AND PANELS
CABLE RAMPS
2096 –
12 Female XLRs
Series
“D’’
2097 –
12 Neutrik Series ‘‘D’’
Prepunched
Steel Jack Panels
Order #
Configuration
Weight kg/lb
22-2096
12 Female XLRs
.27/.60
22-2097
12 Neutrik Series"D"
.27/.60
Low Noise Five Blade
Fan Panels
Cooling Fan
115V
D00
A.C.
0.65
BALL BEARING
38
1.50
Features
❖ Heavy
duty steel (1.5mm/16 ga.)
flanges on top and bottom for strength
❖ Standard rack width (483mm/19")
❖ Fit in three rack spaces
❖ Available to accommodate
one, two, or three fans
115V
❖ 11mm/.43"
D00
A.C.
0.65
BALL BEARING
117
4.63
FAN 4115
Order #
No. Material Color Height Width Weight
of Fans
mm/inch mm/inch kg/lb
22-2102 2 fans
steel black 133/5.25 483/19 .86/1.90
❖ For use in equipment racks
❖ 95 CFM
❖ 190 mA/13W/115V
❖ Ball bearing construction
❖ Five blades
❖ Low noise
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
117
4.63
mm
inch
mm/inch
15
ACOUSTIC FOAM/METAL/PLASTIC CORNERS
ACOUSTIC FOAM/METAL/PLASTIC CORNERS
Cabinet Corner
Flat Corner
Cabinet Corner
22-2001-black
Two-leg amp corner for use on applica-
tions where total material thickness is 19mm/.75" or greater
❖ Corner wraps around mm
inch
the inside edge of mm/inch
the cabinet
❖ For use on vinyl
Weight (kg/lb) . . . . . . . . .020/.044
covered or carpet Material . . . . . 1.2 mm/18 ga. steel
covered cabinets
Finish . . . . . . . . . . . . . . . . . . nickel
❖
22-2002-black
22-2000-nickel
❖ Industry
standard three-long corner for mm
use on vinyl or
inch
carpet covered mm/inch
cabinets
❖ Leg style and leg Weight (kg/lb) . . . . . . . . .020/.044
length match that of Material . . . . . 1.2 mm/18 ga. steel
22-2001.
Finish . . . . . . . . . . . . . . . . . . nickel
Medium 28 ga.
22-2005 -ZINC
mm
use on mid-size inch
mm/inch
cases or cabinets
❖ Only three mounting Weight (kg/lb) . . . . . . . . .058/.127
holes which speeds
Material . . . . . 1.2 mm/18 ga. steel
installation
Finish . . . . . . . . . . . . . . . . . . . . zinc
Corner
holes Weight (kg/lb) . . . .0.04kg/0.08lbs
Material . . . . . 1.2 mm/.039" steel
5mm/.20Dia
❖ Fixing
Heavy Duty
Ball Corner
22-2003
❖ For
❖ Flat
16 ga.
Ball
Corner
❖ Large
mm
inch
heavy
mm/inch
duty zinc corner
Weight (kg/lb) . . . . . . . . .095/.210
❖ For use on large Material . . . . . 1.5 mm/16 ga. steel
cases and cabinets
Finish . . . . . . . . . . . . . . . . . . . . zinc
Medium Size
Black Plastic
Large Black Plastic
Stacking
Corner
Stacking Corner
mm
inch
mm/inch
22-2004 -ZINC
Stacking Corner
22-2185
duty
stackable ball corner
❖ Color: Zinc
mm
inch
mm/inch
❖ Heavy
Fixing holes 5mm/.20"DIA
Forge Eye Bolt
with Shoulder
22-2006
❖ Polypropylene stacking corner
❖ 9mm/.35" inside radius
❖ Ideal for applications requiring a smaller corner such as smaller speaker cabinets or smaller
carpet covered units
22-2007
stacking corner
❖13mm/.51" internal radius
❖Ideal for use on speaker cabinets or
applications with carpet covering
3/8 Thread
❖Polypropylene
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . .014/.031
Material . . . . . . . . . . . . . . . . Plastic
Finish . . . . . . . . . . . . textured black
Acoustic Charcoal Foam
Thin, flexible for lining speaker grilles
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . ..037/.082
Material . . . . . . . . . . . . . . . plastic
Finish . . . . . . . . . . . textured black
22-2043
❖Pull
capacity 1,400 lbs.
duty
❖Heavy
mm
inch
mm/inch
Weight (lbs) . . . . . . . . . . . ..48 lbs.
Material . . . . . . . . . . . . . . . . . Steel
Finish . . . . . . . . . . . . . . . . . . grey
Esther Foam - 72" Length
2 lb. premium quality polyurethane packaging foam
22-2328
pores/inch density allows
sound through but keeps dust
and debris out
❖Charcoal gray color
❖Sold in 1/2" x 48" x 72" sheets
22-5335
❖20
16
Type of Foam . . . Acoustic Charcoal
Size . . . . . . . . . . . . . 1/2" x 48" x 72"
Weight (lbs) . . . . . . . . . . . . . . . 1.98
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 lbs.Ester Convoluted
Size. . . . . . . . . . . . . . . . . . . . . . 11⁄2" X 54" X 72"
Weight (lbs). . . . . . . . . . . . . . . . . . . . . . . . . . 3.93
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
4" Blue Rigid Caster
22-2370
4" Blue Swivel Caster
mm
inch
mm/inch
Heavy duty rigid caster
❖Load capacity: 90 kgs./350 lbs.
❖4"
22-2368
22-2369
❖
4" Heavy duty swivelblue caster with sual loking
brake 350 lbs. capacity.
❖
❖
❖
mm
inch
mm/inch
Weight (kg/lb) . . . 91/2.01 standard
. . . . . . . . . . . . . . . .98/2.16 large
Tire . 3 1/2" gray rubber w/alum. core
Steel Finish . . . . . . . . . . . . . . zinc
❖4"
mm
inch
mm/inch
Heavy duty swivel blue caster
lbs. capacity
❖350
Deep Recessed Caster Cup
2" Swivel Caster
22-2335
31/2" heavy duty non- marking gray
rubber tire w/Mirrolite alum. core
Dual ball bearing construction
Heavy duty steel mounting plate in
your choice of two sizes standard:
2.52"x3.63" or
large planted: 3.13"x4.13"
Load capacity: 115kgs./250 lbs.
mm
inch
mm/inch
Black Tire
Gray Tire/Aluminum Core
31/2" Swivel Caster
❖
4" Blue Swivel Caster
with Brake
22-2320
❖ 2"
black rubber tire
bearing swivel assy
❖ Heavy duty steel
mounting plate
❖ Load capacity
45kgs/100lbs
mm
inch
mm/inch
❖ Ball
Weight (kg/lb) . . . . . . . . . . 20/45
Tire . . . . . . . . . . 2" black rubber
Steel Finish . . . . . . . . . . . . zinc
22-2359
For 31/2" x 11/4" & 4" x 11/4" casters.
❖ Extra deep recess keeps casters in place.
❖
mm
inch
mm/inch
RECESSED Casters
3" Corner Mount
Silver Caster
❖3" Black rubber tire
❖Heavy duty die cast
22-2355
❖2 /4" black rollerblade style wheel
❖Medium duty black plastic recessed
3
mounting cup
❖Only four mounting holes for easy installation
mm
inch
mm/inch
22-2356
zinc mounting cup,
avilable in either silver or black painted finish
❖Only four mounting holes for quick and easy
installation
❖Load capacity: 90kgs. /200lbs.
mm
inch
mm/inch
22-2367
❖3"
mm
inch
mm/inch
Gray Wheel
capacity 90 kgs/200 lbs.
❖Load
SPEAKER CONNECTOR PLATES AND RUBBER FOOTS
Dish for two Neutrik
NL4 & NL8MPR
Dish for single Neutrik
NL4 & NL8MPR
44-2018
punched for two
Cannon EP or Neutrik
Speakon
❖NL4MR/NL8MR
connectors
❖For use on vinyl covered or
carpet covered cabinets
mm
inch
mm/inch
❖Dish
mm
inch
mm/inch
Weight (kg/lb) . . . . . 0.30/0.66
Material . . . . . . . 1.2 mm/0.047
22-2017-zinc
recessed dish prepunched for two
/4" instrument jacks
for running speaker cabinets in line
locations provide space for additional
customization by the user
❖Medium
22-2118-black
1
❖Ideal
❖Hole
Nautrick dish in
black finish.
❖Single
Dual
38 mm/1.50" Diameter
Recessed Dish
Rubber Foot
22-2038
❖
44-2057-black
punched for 2
cannon E.P. or Neutrik
speakon
❖4 pole chassis
❖Dish
Material . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . black
44-2058-black
❖Dual
1/4" jack Dish
Weight (kg/lb) . . . . . . . . 16/.34
Material . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . black
❖
❖
❖
Dual
/4" Jack Dish
1
CASTER / SPEAKER PLATES / RUBBER FOOTS
Casters
Rubber composition helps prevent sliding of enclosure
Steel insert for extra fixing strength
mm
19mm/.75" height for inch
increased shock absorp-
mm/inch
tion and wearability
Protects underside of an Weight (kg/lb) . . . . . . .031/.070
enclosure and surface on Material . . rubber with steel insert
which enclosure is placed Finish . . . . . . . . . . . . . . . . black
mm
inch
mm/inch
Large Rubber Foot
64 mm/2.50" Diameter
❖ Oversized
rubber foot for heavy duty enclosures
❖ Rubber composition helps prevent sliding of enclosure
❖ Full 25.4 mm/1.00" height for maximum shock absorption and wearability
❖ Protects underside of an
enclosure and surface on which enclosure is placed
22-2037
Weight (kg/lb) . . . . . . . . . ..107/.235
Material . . . . . . . . . . . . . . . . . rubber
Finish . . . . . . . . . . . . . . . . . . . . black
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
mm
inch
17
HANDLES / TWIS TLOCK LATCH
HAndles/Twistlocks
Two-Part Recessed
Small Steel Textured
“Teardrop’’
Cabinet Handle
❖ Sleek
22-2034
22-2036
❖ Edge mount handle. Plastic dish
Weight (kg/lb) . . . . . . . . .21/.45
Material . . . . top engineered resin
Finish . . . . . . . . . . . textured black
with steel handle.
❖ Finish: Black
Medium
“teardrop’’ shape adds an
eye-catching, great new look to
any speaker cabinet
❖ Consists of two parts: recessed
housing and heavy duty grip
❖ Housing is engineered to
minimize sound reflections in
the cabinet
❖ Grip is ergonically designed for
carrying comfort
❖ Produced from top engineered
resin for terrific strength and
durability
❖ Black is standard custom colors
available by special order
❖ Custom logo can be imprinted
on the grip insert
❖ Load testing data is available
on request
Cabinet Handle
22-2035
44-2035-IMPORT
mm
inch
mm/inch
❖All steel construction
❖Heavy duty round 25mm/1" ø steel grip
finish
❖New textured black
❖Ideal for use on
speaker cabinets
Weight (kg/lb) . . . . . . . . . .55/1.21
Material . . . . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . textured black
Small Size
Heavy Duty
Recessed Handle
Plastic
Surface Mount
Handle
with Thick Grip
Pocket
Handle
IMPORT:
44-2009-black
22-2008HD-ZINC
22-2011
IMPORT:
❖Only 10 mtg holes – speeds installation
mm
❖Integral mounting: top four
inch
mtg holes affix retainer to
mm/inch
plate and then application to
surface
❖Tested to 600 N/135 lbs.
Weight (kg/lb) . . . . . . . . . . . . .36/.79
tension without significant
Material . . . . . . steel handle/rubber grip
deformation to retainer or bail Finish . . . . . . . . . . . . . . . . . . . . . . . . zinc
44-2111-zinc
❖Surface mount
❖Bail stops at 90˚
❖Heavy duty but small in size
❖Ideal for shallow cases
❖16mm/.63" ø padded grip
for comfort
All Black
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . . . . . .26/.56
Material . . . . . steel handle/rubber grip
Finish . . . . . . . . . . . . . . . . . . . . . . . zinc
New Medium
with Spring – Loaded Anchor Plate
with Spring-Loaded Anchor Plate
22-2012
rubber strap with
mm
black plastic end caps
inch
mm/inch
steel spring
insert for added strength
Weight (kg/lb) . . . . . . . . . . . . . . .08/.17
❖Attractively designed for a
Material . . . . rubber strap/steel end caps
neat, professional look
Finish . . . . . black handle/black end caps
Material . . . . . . . . . . . Plastic
Finish . . . . . . . . . . . . . . Black
Small
❖Load
❖Tempered
44-2010 - IMPORT
Link Lock Fastener
Strap Handle
❖Black
mm
inch
mm/inch
22-2041 -twist lock
22-2000 -keeper
Weight (kg/lb) . . . . ..04/.09 (Link Lock)
. . . . . . . . . . . .005/.012 (Keeper Plate)
Material . . . . . . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . . . . . . . . . zinc
Twist Lock
22-2042
Weight (kg/lb) . . . . . . .10/.22 (Twist Lock)
. . . . . . . . . . . . .007/ .015 (Keeper Plate)
Material . . . . . . . . . . . . . . . . . . . . . . Steel
Finish . . . . . . . . . . . . . . . . . . . . . . . . . Zinc
Medium
Drawlatch
Twist Catch
Twist Catch
anchor
plate automatically
compensates for up to
4mm/.16" misalignment
❖Easy Operation actuated
by fingertip pressure on the
wing-180° turn locks or
unlocks
❖Locked fastener lies flat to
side of case-wing locks in
down position
❖Two stops hold the catch in
position about 3/4" above
dish, helping to prevent
damage or injury from an
extended catch
❖Spring-Loaded
carrying capacity up to 2,000 N/450 lbs.
tension
❖Spring-loaded anchor
plate automatically
compensates for up to 3
mm/ .11" misalignment
❖Easy operation actuated
by fingertip pressure on
the wing-180° degree turn
locks or unlocks
❖Locked fastener lies flat to
side of case -wing locks in
down position
with or without Keylock
44-2040
22-2040-zinc
duty twist catch in a
medium size dish
stops hold the catch in
position about 3/4" above the dish, helping to prevent
damage or injury from an
extended catch
22-2013
❖Heavy
mm
inch
mm/inch
❖Two
Weight (kg/lb) . . . . . . . . . .26/.58
Material . . . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . . . . . . zinc
22-2030
Catch in Plain Dish
Split to Hole Centre
3
19mm/ /4"
❖Butterfly
❖From
Medium
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . . 0.45/1.0
Material . . . . . . 1.2 mm/.047" steel
Finish . . . . . . . . . . . . . . . . . . . . zinc
but rugged
as hinge but allows
user to quickly remove lid
of application
❖Only four mounting holes
18
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . .048/.106
Material . . . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . . . . . zinc
Weight (kg/lb) . . . . . .113/.250
Material . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . bright nickel
Safety Cables
guarantee safety in every
installation large and small.
Models are made of heavy
duty aviation cable
to ensure safety.
❖ Lengths
available 30"
and 18"
❖To
44-2014
22-2014-zinc
❖Acts
mm
inch
mm/inch
❖Available
Roping Eye
Take-Apart Hinge
❖Small
duty drawbolt
with or without
keylock
❖Supplied with one key
❖Bright nickel finish
❖Heavy
22-2048
use in securing cases or
cabinets while in transit
❖Spring-loaded ring
❖For
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . . 37/.81
Material . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . . . black
83-SC18
83-SC30
Weight Capacity (lbs) . . . . . . . . . 700
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
Large
Hybrid Tongue
Groove
22-2070
22-2072
Brace
Tight Radius
Aluminum
⁄4" x 10'
1
⁄2" x 78"
1
Weight (kg/lb) . . . . . . . . . . . . . . . . . . . . . . .0.22/0.15
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum
Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . steel
mm
inch
mm/inch
22-2071
22-2073
mm
inch
mm/inch
Double Angle
mm
inch
mm/inch
Small
Brace
22-2076-zinc
Weight (kg/lb) . . . . . . . . . .119/.263
Material . . . . aluminum (6063 alloy)
Finish . . . . . . . . . . . . . . . . mill finish
Weight (kg/lb) . . . .kg/100 2.0lb/100 4.4
Material . . . . . . . . . . . . 1.2mm/.047" steel
Four-Hole Clamp
Two-Hole Clamp
⁄4" x 10'
1
⁄2" x 78"
1
with Rivet Protectors
with Rivet Protectors
Tight Radius
22-2074
❖Popular four-hole clamp
❖Holes are in-line mm
inch
mm/inch
allowing all fastening to the extrusion
❖Used on trunks, crates, laminated cases, fiber cases, or carpet-covered cases.
22-2075-zinc
Weight (kg/lb) . . . .kg/100 1.0lb/100 2.2
Material . . . . . . . . . . . . 1.2mm/.047" steel
22-2077
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . .015/.033
Material . . . . . . 1.2 mm/18 ga. steel
Finish . . . . . . . . . . . . . zinc or nickel
ABS Plastic
Pretapped
Rack Mount
Screw
Laminating
Sheets
Full Hole
Rack Rail
22-2056
mm
inch
mm/inch
most popular
extrusion sizes
❖Hole locations allow for
fastening to extrusions
❖Works with both rivets
and screws
❖Fits
with nylon washer
22-2470
Weight (kg/lb) . . . . . . . . . . . . . .2.04/4.50
Material . . . . . . . . . . 2.5 mm/12 ga. steel
Finish . . . . . . . . . . . . . . . . . . . . . . . . black
Weight (kg/lb) . . . . . . . . . . .065 lbs
Thickness . . . . . . . . . . . . . . . . .040"
Color . . . . . . . . . . . . . . . . . . . . black
❖ABS
plastic laminating
sheets.
22-56100
100 pieces per bag
SPEAKER MOUNTS/CLAMPS/PORTS/CABLE RAMP
1 1/2" Speaker
Mount
1 3/8" Speaker
Mount
22-2063
❖
❖
❖
❖
High quality speaker mount with a 1 3/8" opening to fit a speaker stand
Produced from top engineered mm
resin for high strength & durability
inch
Load testing data available mm/inch
on request
Black is standard, custom
Weight (kg/lb) . . . . . . . .11/.24
colors are avail. by special Material . . . . . . . top engineered
order
resinFinish . . . . . . . . . . . . . black
22-2061
High quality speaker mount with a
1 1/2" opening to fit a speaker stand
❖ Produced from top engineered resin for high strength & durability
❖ Load testing data available on request
❖ Black is standard, custom colors are available by special order
❖
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . . . . . .11/.24
Material . . . . . . top engineered resin
Finish . . . . . . . . . . . . . . . . . . . black
Angle Style
22-2051
duty formed steel
❖Professional black finish
❖Fits most speaker grilles
❖Low price
mm
inch
mm/inch
Weight (kg/lb) . . . . . . . .036/.080
Material . . . . . . . . . . . . . . . . . steel
Finish . . . . . . . . . . . . . . . . . . . black
44-2021
22-2027
22-2054
22-2028
22-2029
- 2" x 21/2"
- 3" x 11/4"
- 3" x 41/2"
- 4" x 41/2"
- 61/8" x 6"
Finish . . . . . . . . . . . . black
Front Mount
Speaker Clamp
Grille Clamp
❖Heavy
Plastic
Molded Ports
HYBRID/DOUBLE ANGLE EXTRUSION & RACK HARDWARE
FLIGHT CASE/AMP. RACK HARDWARE
22-2020
Die cast zinc alloy
❖ Black zinc chromate finish
❖ Fits the rims of most popular
high quality speakers
mm
inch
mm/inch
❖
Weight (kg/lb) . . . . . . . .036/.080
Material . . . . . . die-cast zinc alloy
Finish . . . . . . . . . . . . . . . . . . black
Visit us online at www.teilighting.com • Telephone: (305) 888-3980 • (800) 327-8811 • Fax: (305) 885-4950
19
750 West 18th Street • Hialeah, Florida 33010
(305) 888-3980 • (305) 885-4950 fax
Email: info@teilighting.com • www.teilighting.com

Similar documents

B atteries - Jan Electronics

B atteries - Jan Electronics 121A – 30A CONNECTOR - ADAPTER 30A CONNECTOR - ADAPTER

More information