docDRUCKLUFTTECHNIK OTTO NEMEC
download 
Report Transcription
DRUCKLUFTTECHNIK OTTO NEMEC
DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk Catalogue Spare parts illustrated in catalogue can be ordered through e-Mail adress gusto@netax.sk and with former price offer. By ordering a filling ramps, compressors and HP reservoirs the firma DON reserve yourself a delivery period up to 28 calender days. Installing and putting the facility into operation is ussualy icluded in delivery, but it will be a part of writting contract. Delivery period for all others parts is 10 working days. The physical functionality of planned facilities we can present them (not binding) by visiting our work-room after former agreement. Used shortcut: EL GK KK LP HP PL TPA IG AG Electronics Large conic Short conic Low press High press Pressed air Technical pressure revision Internal thread External thread -1- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 01- 01 Valve RGS GK Input: G ¾ ´´ AG Output: G 5/8 ´´ IG DIN 200 / 300 bar D- 01- 02 Valve RGS KK Output: G 5/8 ´ IG DIN 200 / 300 bar D- 01- 03 Protection valve Input: without / with sinter filter A D- 01- 04 Valve RGS Input: M18 x 1,5 Output: G 5/8 ´´ DIN 200 / 300 bar B AG IG -2- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 01- 05 Valve for composit tank 6,8 L Input: M18 x 1,5 AG Output: G 5/8 ´´ IG DIN 300 bar D- 01- 06 Round Valve for 50 L PL tank Input: G ¾ ´´ AG Output: G ¼ ´´ IG DIN 350 bar D- 01- 07 Round filling valve for panel Input: G ¼ ´´ IG Output: G ¼ ´´ IG Mounting: M32 x 1,5 AG -3- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 01- 08 Filling valve for hose Input:, with deaerating (without gauge) D- 01- 09 Flip filling valve with deaerating DIN 200 / 300 bar D- 01- 10 Ball valve - rustless – 2 way Mounting hole Ø 20,4, Ø 6 / 8 mm tube D- 01- 11 Ball valve - rustless – 3 way Mounting hole Ø 20,4 Ø 6 / 8 mm tube -4- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 01- 12 Deaerat valve - swiveling Mounting hole Ø 20,4 Input: M14 x 1,5 IG Output: hose Ø6 mm (inside thread) D- 01- 13 Seat for deaerat valve D- 01- 14 Repair set for filling valve (belong to D0-1-06) D- 01- 15 Repair set for Flip filling valve -5- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 01- 16 Wrench for repair set of Flip filling valve D- 01- 17 Sealing screw for Valve A,B D- 01- 18 A Round filling valve for panell without deaerating B Round filling valve for panell with deaerating C RGS Valve GK / KK „O“ rings (various dimensions) (after writted request) -6- C DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 02- 01 Filling tube for the filling ramp Input: M16 x 1,5 Output: DIN 200 bar D- 02- 02 Filling tube for the filling ramp Input: M16 x 1,5 Output: DIN 300 bar D- 02- 03 Filling tube Input: Output: M16 x 1,5 – 60° for hose DIN 200 bar D- 02- 04 Filling tube with Flow-Stop Input: M16 x 1,5 – 60° for hose Output: DIN 200 bar D- 02- 05 Filling tube short with Flow-Stop Input: M16 x 1,5 – 60° for hose Output: DIN 200 bar -7- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 02- 06 Filling tube with Flow-Stop Input: M16 x 1,5 – 60° for hose Output: DIN 300 bar -8- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 03- 01 Metal hand-ring for sealing Ø 50 DIN 300 bar D- 03- 02 Metal hand-ring Ø 42 DIN 300 bar D- 03- 03 Metal hand-ring Ø 42 DIN 200 bar D- 03- 04 Metal hand-ring Ø 50 DIN 200 bar -9- DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 03- 05 Rubber- metal hand-ring Ø 42 DIN 200 bar D- 03- 06 Metal hand-ring Ø 75 DIN 300 bar, AG 5/8“ - 10 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 04- 01 Backlash valve Input: Output: A EO Ø6S G ¼ ´´ IG A D- 04- 02 Reduction Input: G ¼ ´´ AG Output: G 5/8 ´´ IG, DIN 200 bar D- 04- 03 Reduction Input: G ¼ ´´ AG Output: G 5/8 ´´ IG, DIN 300 bar B EO Ø8S G ¼ ´´ IG B - 11 - C G ¼ ´´ IG G ¼ ´´ IG C DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 04- 04 Reduction for hose inlet Input: M16 x 1,5 AG Output: G 5/8 ´´ IG, DIN 200 bar D- 04- 05 Reduction for hose inlet Input: M16 x 1,5 AG Output: G 5/8 ´´ IG, DIN 300 bar D- 04- 06 Reduction Input: G ¼ ´´ AG 1. Output: G 5/8 ´´ IG, DIN 300 bar 2. Output: SV 225 D- 04- 07 Adapter Input: G ¾ ´´ IG Output: G 5/8 ´´ IG - 12 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 04- 08 Adapter Input: G ¾ ´´ AG Output: M22 x 1,5 AG D- 04- 09 Oxygen adapter for Nitrox Input: G 5/8 ´´ IG Output: G 5/8 ´´ IG DIN 200 bar D- 04- 10 Cover cap G 5/8 ´´ IG, without chain D- 04- 11 Cover cap anchoring - 13 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 04- 12 Cover cap for oxygen G ¾ ´´, without chain D- 04- 13 Connection 90° DIN 300 bar Input: G 5/8 ´´ IG Output: G 5/8 ´´ AG DIN 300 bar D- 04- 14 Double connection Input: 2 x G 5/8 ´´ IG Output: 1 x G 5/8 ´´ AG DIN 200 bar D- 04- 15 Double connection for oxygen Input: 2 x G ¾ ´´ AG Output: 1 x G ¾ ´´ IG DIN 200 bar - 14 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 04- 16 Adapter Input: M22 x 1,5 AG Output: G 5/8 ´´ IG DIN 200 bar D- 04- 17 Adapter Input: M22 x 1,5 AG Output: G 5/8 ´´ IG DIN 300 bar - 15 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 05- 01 HP Press reducer– steepless, adjustable DIN 0 – 350 bar D- 05- 02 Fixing ring for HP Press reducer (D-05-01) D- 05- 03 HP Press reducer – fix adjusted Adjust range up to 300 bar D- 05- 04 LP Press reducer 0 – 16 bar Input: 5/8 ´´ , 200 bar Otput: ¼ ´´ - 16 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 05- 05 LP Press reducer 0 – 20 bar Input: G 5/8 ´´ AG Output: Quick coupling D- 05- 05 Safety valve without ( TÜV ) PN 225 / 350 bar, DN 5 D- 05- 06 Safety valve holder A - 17 - B DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk ( without TÜV ) D- 05- 07 Safety valve PN 225 bar D- 05- 08 Pneumatic swivel with 2 way valve - 18 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 06- 01 Check gauge with deaerating Input: G 5/8 ´´ D- 06- 02 Check gauge for oxygen with deaerating Input: G 3/4 ´´ DIN 400 bar - 19 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 06- 03 Check gauge Ø 100 Inlet: in the rear DIN 400 bar, with glycerine D- 06- 04 Check gauge Ø 63 Inlet: in the rear DIN 400 bar, with glycerine D- 06- 05 Check gauge Ø 100 Inlet: in the rear DIN 16 bar, with glycerine - 20 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 06- 06 Check gauge Ø 63 Inlet: below DIN 100 bar, with glycerine D- 06- 07 Check gauge Ø 63 Inlet: below DIN 100 bar D- 06- 08 Check gauge Ø 100 Inlet: below DIN 400 bar, with glycerine D- 06- 09 Rubber cap for Check gauge Ø 63 - 21 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 01 Press switch 30 – 500 bar, 240V / 1,5 A D- 07- 02 Timer 0,05 Sec – 300 Hr. 24V, 42 – 48 V, 110 – 240 V - 22 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 03 Magnetic valve 330 bar, 220V / 50 Hz, 7,7 W D- 07- 04 Magnetic valve 230V / 50 Hz D- 07- 05 Condense automatic D- 07- 06 Piston for magentic valves for D-07-04 - 23 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 07 Collecting strip for condensate 2 – way D- 07- 08 Deaerating Valve with check gauge 400 bar Without armature screw D- 07- 09 Air filter Ø 65 x 70 – N 260 (Bauer, Poseidon, Coltri, Nemec ) D- 07- 10 Air filter Ø 160 x 76 N500 - 24 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 11 Noise silencer Input: ½´´ IG D- 07- 12 Silencer for oil separator Input: 5/8´´ D- 07- 13 Oil level gauge, 1 Block D- 07- 14 Oil level gauge, 2 Blocks - 25 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 15 Kompressor oil 1 L. Mineral D- 07- 16 Silicone vaseline 200 Gr. D- 07- 17 Silentblock Ø 50 x 50 D- 07- 18 Rubber foot - 26 - 1 L. Synthetic DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 07- 19 Suck hosepipe Ø 30 mm (inner) D- 07- 19 Digital wet measurement D- 08- 01 Filter cartridge D 45-200 length: 200 mm, rechargeable D- 08- 02 Filter cartridge D 45-380 length: 380 mm, rechargeable - 27 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 08- 03 Filter cartridge D 70-500 length: 500 mm, rechargeable D- 08- 04 Filter cartridge D 70-500 EL length: 500 mm, rechargeable D- 08- 05 Filter cartridge D 70-700 length: 700 mm, rechargeable D- 08- 06 Filter cartridge D 70-700 EL length: 700 mm, rechargeable D- 08- 07 Oil separator N 280-A length: 280 mm with / without TÜV - 28 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 08- 08 Filter corpus complete N 620 F length: 500 mm, 300 bar, volume 2,1 L. with / without TÜV N D- 08- 09 EL Filter corpus complete N 835 F length: 700 mm, 300 bar, volume 2,85 L. with / without TÜV - 29 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk N EL D- 08- 10 Head of filter cartridge for D 70 EL D- 08- 11 Head of filter cartridge for D 70 D- 08- 12 Filter spring for D 45 - 30 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 08- 13 Filter spring for D 70 D- 08- 14 Filter separator plate for D 45 D- 08- 15 Filter separator plate for D 70 D- 08- 16 Filter separator felt for D 70 Ø 67 mm D- 08- 17 Filter separator foamy material for D 70 EL Ø 67 mm D- 08- 18 Filter separator felt for D 70 EL Ø 63 mm - 31 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 08- 18 Filter separator felt for D 45 Ø 42 mm D- 08- 19 Steel bracket for filter D 70 D- 08- 20 Plate for filter D 70 D- 08- 21 Molecular sieve 1 – 1,5 mm - 32 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 08- 22 Active charcoal D- 08- 23 Transmitting hose for air Input: 5/8´´ IG Output: 5/8´´ AG D- 08- 24 Transmitting hose for air without tightening screw 200 / 300 bar Input: M16 x 1,5 IG Output: M16 x 1,5 IG D- 08- 25 Steel bracket for 50 L. reservoirs tanks, complete 200 / 300 bar - 33 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 10- 01 Fill ramp to build in 2x 300 bar, 2x 200 bar D- 10- 02 Extern fill ramp 2x 300 bar, 4x 200 bar D- 10- 03 Compressor N 260 Booster - 34 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk E – Motor, 380 V, 50 Hz, 5,5 Kw condensing automatic, air output: 260 – 1200 l / min, ... D- 10- 04 Compressor N 260 Booster - silenced E – Motor, 380 V, 50 Hz, 5,5 kW air output: 260 – 1200 l / min, condensing automatic with timer and also after turn off , ... - 35 - DON-Drucklufttechnik s.r.o. Tel.: +421 2 5479 3123, Handy: +421 905 488 740 e-Mail: gusto@netax.sk D- 10- 05 Reservoirs steel tanks N SS 100 2 x 50 L/ 360 bar N SS 200 4 x 50 L/ 360 bar - 36 -
