File - Insulation Components, Inc.

Transcription

Insulation Components, Inc.
MADE IN THE
Phone: 574-258-1885
Fax: 866-565-0359
USA
www.insulationcomponents.com
info@insulationcomponents.com
M ANUFACTURED AND STOCKED IN M ISHAWAKA, INDIANA
About Insulation Components, Inc.
Proudly Serving Distribution For Over 15 Years
We manufacture and stock a wide variety of I-Shields and ship them throughout the
United States. We also distribute other quality mechanical insulation products. Please
feel free to contact us so we may quote your product needs.
P: 574-258-1885 F: 866-565-0359
Mission Statement
To provide our customers quality products when they need them the most.
Vision Statement
To be a God honoring company in word and deed.
Core Values
Value: To provide our customers with high quality, cost efficient solutions
to their needs in a timely manner.
Dependability: to be always fair, honest and straightforward with people.
Integrity: to set up high ethical standards based on Biblical absolutes and
then adhere to them no matter what the cost.
Adaptability: To constantly adjust to our customer’s individual needs and desires.
Commitment: To never be satisfied when striving for excellence, but always
seek to improve our products and ourselves.
Call: (574) 258-1885 / Fax 866-565-0359
Our Products
I-Shields Features Include
Low economical cost. Each I-Shield individually marked with outside diameter.
Packaged in strong heavy gauge boxes or square buckets.
Each package clearly labeled with size, length, gauge and quantity.
Options of rounded edge, flared edges, alignment ribs, or plain straight I-Shields.
Stocked and ready-to-ship 2.0 - 12.5 O.D. I-Shields.
Same day or next day shipping on most orders.
Freight allowed on quantity orders.
IC I-Block Supports Features Include
Low economical cost.
Various sizes to accommodate insulation thickness.
Choice of standard softwood, hardwood or High Density Fiberglass.
Bundled inside box for ease of handling.
Each package clearly labeled with type, size and quantity.
Ship along with I-Shields for freight allowance.
Insulated I-Shields Features Include
Custom made to your specifications.
Popular sizes in stock and ready to ship.
Packaged in strong heavy gauge boxes.
Each package clearly labeled with size, length, gauge and quantity.
Fast shipping on custom sizes.
I-Tools and Accessories Features Include
Mechanical insulation industry tools to order.
Each tool packaged and clearly labeled with description and quantity.
Fast shipping on ALL tools and accessories.
Ships along with I-Shields for freight allowance.
Same day or next day shipping on most orders.
www.InsulationComponents.com
Insulation Pipe I-Shield Overview
Rounded w/Rib & Flare I-Shields
- Rounded Edge - To prevent the corner of I-Shields from cutting into the vapor barrier
during installation. Adds ease to separating I-Shields & removing them from the
package.
- Flared Edge - To prevent I-Shields from cutting into pipe insulation when applying and
to add structural strength.
- Ribs - To help secure I-Shield in place over the hanger and to alleviate the I-Shield
slipping out of place with pipe movement. They also add structural strength.
- Each I-Shield is marked with its outside diameter measurement - along with IC charts
this guarantees the proper size I-Shields is used.
- Heavy Duty Packaging with labeling - improved, stronger packaging with label
Rib & Flare I-Shields
- Flared Edge - To prevent I-Shield from cutting into pipe insulation when applying and
- Ribs - To help secure the I-Shield in place over the hanger and to alleviate the
I-Shields slipping out of place with pipe movement. They also add structural strength.
this guarantees the proper size I-Shield is used.
providing detailed information on diameter, gauge, length and pieces per carton.
Straight I-Shields
- Galvanized Finish - For superior rust proof protection.
Flared I-Shields
- Flared Edge - To prevent I-Shields from cutting into pipe insulation when applying and
Various Sized & Styled I-Shields
- Each I-Shield is individually marked with outside diameter
- Each package clearly labeled with size, length, gauge and quantity
- Stainless Steel I-Shields also available on a quote to quote basis
OUR CAPABILITIES INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING:
- Various Lengths - 4", 6", 8", 9", 12", 15", 18" & 24" Straight I-Shields only
- I-Shield styles include - 12” Long w/ Rib & Flares, 12” long w/ Flare only,
straight I-Shield & 8” Long w/ Ribs
- 8” Long - Rounded edge w/ Ribs only
- 12” Long - Rounded edge w/ Rib & Flares and Rounded edge w/ flare only
- Different Degrees of I-Shields - 180°, 200° & 220° I-Shields
Call: (574) 258-1885 / Fax 866-565-0359
I-Blocks Overview
Pine wood I-Blocks
- Pine wood I-Blocks - For use of best insulation support
- Each IC I-Block Bundled - to make for fast and easy handling
- Shipped along with IC I-Shields - ships with I-Shields for freight allowance
- Heavy Duty Packaging with clear labeling - Improved, stronger packaging with label
providing detailed information on size, style, pieces/ bundle, and pieces per carton.
Hardwood I-Blocks
- Hardwood Blocks - For use of best insulation support
- Each IC Block Bundled - to make for fast and easy handling
- Shipped along with IC I-Shields - ships with I-Shields for freight allowance
- Heavy Duty Packaging with clear labeling - Improved, stronger packaging with label
providing detailed information on size, style, pieces/ bundle, and pieces per carton.
High Density Fiberglass I-Blocks
MATERIALS/ CONSTRUCTION
- 18lb. Cu./ft. Density
- Service temperature of –120° F. to +650° F.
- 0.2% by volume, 96 hrs. at 120° f. 96% RH Moisture Absorption
- Does not cause or accelerate corrosion
- Non-combustible product
- Non-Shrinkage material. Dimensionally stable.
- PH9 Alkalinity
- K= .30 (stable, non-deteriorating)
- Compressive strength of nominal 5% deflection @ 30PS
- 10% deflection @ 80PSI
- -10– Flame spread index and -10– smoke development meeting ASTM E-84 24/50.
- All units are 100% Made and Manufactured in the USA
Pine wood I-Blocks
SIZE
1/2" x 1/2" x 5"
PCS/ BOX
300
PCS/ BUNDLE
25
Hardwood I-Blocks
SIZE
1/2" x 1/2" x 5"
PCS/ BOX
300
PCS/ BUNDLE
25
1/2" x 3/4" x 5"
200
20
1/2" x 3/4" x 5"
200
20
1" x 1" x 6"
300
12
1" x 1" x 6"
300
12
1-1/2" x 1" x 6"
200
9
1-1/2" x 1"x 6"
200
9
1-1/2" x 1-1/2" x 6"
150
6
1-1/2" x 1-1/2" x 6"
150
6
2” x 1-1/2” x 6”
120
4
2" x 1-1/2" x 6"
120
4
2" x 2" x 6"
75
4
Product Catalog
Package Quantity, Standard Gauge & Size Chart
I-SHIELDS O.D.
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
LENGTH
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
GAUGE
22
22
22
22
22
22
22
22
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
PCS/BOX
100
100
50
50
30
30
30
30
30
30
30
20
20
20
20
15
15
15
15
15
15
15
15
15
10
10
10
10
10
10
10
10
10
10
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
PCS/PACKAGE
150/BUCKET
100/BUCKET
100/BUCKET
80/BUCKET
60/BUCKET
50/BUCKET
50/BUCKET
50/BUCKET
40/BUCKET
40/BUCKET
30/BUCKET
30/BUCKET
30/BUCKET
20/BOX
20/BOX
15/BOX
15/BOX
15/BOX
15/BOX
15/BOX
15/BOX
15/BOX
15/BOX
15/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
10/BOX
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
AS ORDERED
PACKAGED IN BUCKETS
OR BOXES
EACH I-SHIELD MARKED
w/ O.D. SIZE
VARIOUS SIZES & STYLES
PLEASE NOTE: YOU MUST ORDER FULL BOX QUANTITY ON STOCK ITEMS UP TO 12.5 O.D.
Call: (574) 258-1885 / Fax 866-565-0359
Specification Sheet
Rounded w/Rib & Flare I-Shields
DESCRIPTION
An INSULATION COMPONENTS Rounded w/Rib & Flare I-Shield is a 180 degree
rounded piece of galvanized coated steel used to protect piping insulation from
compressing at pipe hanger locations. IC Rounded w/Rib & Flare I-Shields come
with flared edges and ribs machined into each part. The flared edges help the I-Shield
from cutting into the pipe insulation which damages the vapor barrier. The 180° Ribs
aid in the alignment of the I-Shield. They ensure the I-Shield is placed directly below
the hanger and help to alleviate the I-Shield slipping out of place with pipe movement.
The Rounded edge prevents the I-Shield from cutting into the vapor barrier. It is
suggested that wood I-Blocks be used along with the I-Shield to guarantee the
Rounded Edge I-Shield Features:
proper support. (see IC Wood I-Block Product Data Sheet)
w/ Rib & Flare, Flared & No Flare (Straight)
FEATURES
?
Rouned Edge - To prevent corner of I-Shield from cutting into vapor barrier during installation. Adds ease to
separating I-Shields and removing them from the package.
?
Flared Edge - To prevent the I-Shield from cutting into pipe insulation when applying and to add structural strength
?
Ribs - To help secure I-Shield in place over the hanger and to alleviate the I-Shield slipping out of place with pipe
movement. They also add structural strength.
?
Each I-Shield marked with its outside diameter measurement - along with IC charts this guarantees the proper
size I-Shield is used.
?
Heavy Duty Packaging with clear labeling - Improved, stronger packaging with label providing detailed
information on diameter, gauge, length, and pieces per carton.
APPLICATIONS
INSULATION COMPONENTS I-Shields are made for use on plumbing
and HVAC mechanical piping systems with temperatures ranging from
-120i to +500i F. IC I-Shields are ideal for use on medium and low
compressive strength pipe insulations and insulations which have a
vapor barrier which is either field or factory applied. Such insulations
include but are not limited to: rubber, polyethylene, fiberglass, urethane,
Styrofoam and calcium silicate.
NOTE:
When applied with the correct wood I-Block (See IC Wood I-Block Product Data Sheet)
IC I-Shields are made to withstand 5 PSI compressive strength on a maximum span
of 10 linear feet.
RECOMMENDED INSTALLATION INSTRUCTIONS
Begin by lifting the appropriately sized IC I-Shield upward towards the insulated pipe to just outside the hanger location.
Proceed by sliding the I-Shield underneath the hanger until the hanger is in the middle of the I-Shield.
ENGINEERING GUIDE SPECIFICATION
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC GALVANIZED STEEL
I-SHIELD SHALL BE INSTALLED. ALSO EACH I-SHIELD SHALL BE MARKED BY THE O.D. OF THE PIPE
INSULATION.
Specification Sheet
Rib & Flare I-Shields
DESCRIPTION
An INSULATION COMPONENT I-Shield is a 180 degree piece of
galvanized coated steel used to protect piping insulation from compressing
at pipe hanger locations. IC I-Shields come with flared edges and ribs machined
into each part. The flared edges help the I-Shield from cutting into the pipe
insulation which damages the vapor barrier. The Ribs aid in the alignment
of the I-Shield. They ensure the I-Shield is placed directly below the hanger
and help to alleviate the I-Shield slipping out of place with pipe movement.
It is suggested that wood I-Blocks be used along with I-Shields
to guarantee the proper support. (see IC Wood I-Block product data sheet)
FEATURES
?
Flared Edge - To prevent the I-Shield from cutting into pipe insulation when applying and to add structural strength
?
Ribs - To help secure I-Shield in place over the hanger and to alleviate the I-Shield slipping out of place with pipe
movement. They also add structural strength.
?
Each I-Shield is marked with its outside diameter measurement - along with IC charts this guarantees the proper size
I-Shield is used
?
APPLICATIONS
compressive strength pipe insulations and insulations which have a vapor
barrier which is either field or factory applied. Such insulations include but
are not limited to: rubber, polyethylene, fiberglass, urethane, Styrofoam
and calcium silicate.
NOTE:
of 10 linear feet.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC GALVANIZED STEEL I-SHIELD
SHALL BE INSTALLED. ALSO EACH I-SHIELD SHALL BE MARKED BY THE O.D. OF THE PIPE INSULATION.
Call: (574) 258-1885 / Fax 866-565-0359
Specification Sheet
Straight I-Shields
DESCRIPTION
An INSULATION COMPONENT I-Shield is a 180 degree rounded
piece of galvanized coated steel used to protect piping insulation
from compressing at pipe hanger locations. It is suggested that
wood I-Blocks be used along with the I-Shield to guarantee the
proper support. (See IC Wood I-Block product data sheet)
FEATURES
?
Galvanized Finish - For superior rust proof protection.
?
I-Shield is used
?
APPLICATIONS
compressive strength pipe insulations and insulations which have a
vapor barrier which is either field or factory applied. Such insulations
include but are not limited to: rubber, polyethylene, fiberglass, urethane,
Styrofoam and calcium silicate.
NOTE:
of 10 linear feet.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC GALVANIZED STEEL
I-SHIELD SHALL BE INSTALLED. ALSO EACH I-SHIELD SHALL BE MARKED BY THE O.D. OF THE PIPE
INSULATION.
Specification Sheet
Flared I-Shields
DESCRIPTION
An INSULATION COMPONENT I-Shield is a 180 degree rounded piece of
galvanized coated steel used to protect piping insulation from compressing
at pipe hanger locations. IC I-Shields come with flared edges and ribs machined
into each part. The flared edges help the I-Shield from cutting into the pipe
insulation which damages the vapor barrier. The Ribs aid in the alignment
of the I-Shield. They ensure the I-Shield is placed directly below the hanger
and help to alleviate the I-Shield slipping out of place with pipe movement.
It is suggested that wood I-Blocks be used along with the I-Shield to
guarantee the proper support. (see IC Wood I-Block product data sheet)
FEATURES
?
Flared Edge - To prevent I-Shield from cutting into pipe insulation when applying and to add structural strength
?
I-Shield is used
?
APPLICATIONS
compressive strength pipe insulations and insulations which have a vapor
barrier which is either field or factory applied. Such insulations include but
are not limited to: rubber, polyethylene, fiberglass, urethane, Styrofoam
and calcium silicate.
NOTE:
of 10 linear feet.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC GALVANIZED STEEL I-SHIELD
SHALL BE INSTALLED. ALSO EACH I-SHIELD SHALL BE MARKED BY THE O.D. OF THE PIPE INSULATION.
Call: (574) 258-1885 / Fax 866-565-0359
Specification Sheet
IC MSS Series I-Shields
DESCRIPTION
An IC MSS Series I-Shield is a 180 degree rounded piece of galvanized coated
steel used to protect piping insulation from compressing at pipe hanger locations.
These I-Shields resist crushing the insulation at the point of support when the
insulation has more than 5% deformation at 30 psi. These specifically designed
I-Shields are conformed with Federal Specification WW-H-171 (Type 41),
Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 40);install in
accordance with ANSI/MSS-SP-69. It is suggested that wood blocks be used
along with the I-Shield to guarantee the proper support.
(see IC Wood I-Block product data sheet)
FEATURES
?
Galvinized Finish - For superior rust proof protection
?
Manufactured in 18-gauge through 12-gauge thickness to meet every ANSI/ MSS application.
?
Each I-Shield is marked with its outside diameter measurement - along with IC charts this guarantees
that the proper size I-Shield is used
?
Individually Inspected - For superior quality control
?
?
information on diameter, gauge, length, and pieces per carton
APPLICATIONS
IC I-Shields are made for use on plumbing and HVAC mechanical
piping systems with temperatures ranging from -120i to +500i F. IC Pipe
I-Shields are ideal for use on medium and low compressive strength pipe
insulations and insulations which havea vapor barrier which is either field
or factory applied. Such insulations include but are not limited to: rubber,
polyethylene, fiberglass, urethane, Styrofoam and calcium silicate.
NOTE:
When applied with the correct wood block (See IC Wood I-Block Product Data Sheet)
IC Pipe I-Shields are made to withstand 15 PSI compressive strength on a maximum span
of 10 linear feet.
PRODUCT DIMENSIONS
IC MSS Series I-Shields are ordered to conform
to the sizing requirements of MSS SP-58 shown below.
This table is based upon insulation compressive
strength of 15 P.S.I. in clevis hangers. Higher compressive
strength insulations can result in shorter I-Shield lengths.
Consult your project specification.
Specification Sheet
Routed Fiberglass I-Fittings
DESCRIPTION
An IC Routed Fiberglass Fittings will fit any standard long or short radius 90° or 45°
butt weld or socket elbow found in normal piping schemes. In addition to standard
short and long elbows, IC can also fabricate mitered elbows. Fabricated from Owens
Corning 703 Board Insulation; routed into fiberglass fittings. Elbows are produced to
fit NPS & tubing sizes for industrial applications ranging in temperature from
0ºF to 450ºF, (-18ºC to 232ºC). IC 90/45 elbows have excellent thermal and acoustical
performance with lowering operating costs.
FEATURES
?
Density: between 3.0 lb./cu. Ft.
?
Water absorption: <2% by weight at 120º F (49ºC)
?
Shrinkage/expansion: None. Dimensionally stable
?
Temperature application: From -20° to +650° F.
?
Surface burning characteristics: (ASTM E 84 Test Method)
?
Flame spread: 25 or less/ Smoke Developed: 50 or less
?
Specifications:
Insulation ASTM C 612 Type IA and IB
New York City MEA No. 227-83
CAN/CGSB-51.10-Type I, Class I
?
All units are Asbestos-free and are 100% made and assembled in the U.S.A.
APPLICATIONS
?
Two-piece, routed design minimizes guesswork in estimates of labor and fitting costs.
?
All L.R. Weld Elbows fit standard aluminum & plastic covers.
?
New design SR Screwed Style Elbows are designed to fit aluminum and plastic covers.
?
Fabricated insulators are designed to insulate heating, cooling, or process piping systems.
?
The I-Fittings are applied by placing two premolded matching half-sections over the pipe fitting, and
joining them together using tape, wire, or adhesive (applied to the seams). After being joined, the fitting insulator is
ready for jacketing, vapor barrier coating, or other finishes.
FORMS AVAILABLE:
?
All pipe sizes are based on ASTM C585
?
IC 90/45’s are available in single layer.
?
Sizes range from 1/2” to 24” pipe.
FACING AVAILABLE:
Upon Request
WHEREVER A PIPE ELBOW NEEDS INSULATION, THE IC HIGH DENSITY FIBERGLASS I-FITTING SHALL BE
INSTALLED. ALSO EACH IC HIGH DENSITY I-FITTING PACKAGE SHALL BE MARKED BY THE SIZE OF
THE PIPE INSULATION AND THE O.D. FOR EASY SELECTION OF COVERING.
NOTE: For sizing see IC Sizing Chart
Call: (574) 258-1885 / Fax 866-565-0359
Specification Sheet
High Density Fiberglass I-Blocks
DESCRIPTION
INSULATION COMPONENTS FIBERGLASS I-BLOCK SUPPORTS are 18lb. cu./ft.
density molded fiberglass which is light yellowish tan in color. Fiberglass I-Blocks are
designed to be used along with the IC I-Shields to ensure that the pipe insulation does
not compress at each hanger location. Fiberglass I-Block Supports enhances thermal
and vibration control properties of the entire insulation system.
ALL units are 100% manufacurtured in the USA
FEATURES
MATERIALS/ CONSTRUCTION
?
18lb. Cu./ft. Density
?
Service temperature of –120° F. to +650° F.
?
0.2% by volume, 96 hrs. at 120° f. 96% RH Moisture Absorption
?
Does not cause or accelerate corrosion
?
Non-combustible product
?
Non-Shrinkage material. Dimensionally stable.
?
PH9 Alkalinity
?
K= .30 (stable, non-deteriorating)
?
Compressive strength of nominal 5% deflection @ 30PS
?
10% deflection @ 80PSI
?
-10– Flame spread index and -10– smoke development meeting ASTM E-84 24/50.
?
All units are 100% Made and Manufactured in the USA
INSULATION COMPONENTS Fiberglass I-Block Supports are placed inside the pipe insulation at ALL hanger location.
Before applying the pipe insulation, simply notch out the insulation with a insulation knife and replace it with the appropriate
sized fiberglass I-Block support. (SEE SIZING CHART FOR RECOMMENDED I-BLOCK SIZE) Proceed by applying the pipe
insulation to the pipe and then inserting the appropriate IC I-Shields.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE FIBERGLASS I-BLOCKS SHALL BE
INSTALLED WITH THE APPROPRIATE IC I-SHIELD. ALSO, THE THICKNESS OF THE FIBERGLASS I-BLOCK
SUPPORT SHALL BE EQUAL TO THAT OF THE PIPE INSULATION THICKNESS.
SIZE
PCS/ BOX
PCS/ BUNDLE
1/2" x 1/2" x 5"
300
25
1/2" x 3/4" x 5"
200
20
1" x 1" x 6"
300
12
1-1/2" x 1" x 6"
200
9
1-1/2" x 1-1/2" x 6"
150
6
2" x 2" x 6"
120
4
IC Fiberglass Placement Chart for various sized Iron Pipe Sizes
Specification Sheet
Wood I-Blocks
DESCRIPTION
INSULATION COMPONENTS WOOD I-BLOCKS are used along with
IC I-Shields to ensure that the pipe insulation does not compress at
each hanger location. (See IC Wood I-Block product data sheet)
FEATURES
?
Choices of Hardwood or Pine wood I-Blocks - For use of best insulation support
?
Each IC I-Block Bundled - to make for fast and easy handling
?
Shipped along with IC I-Shields - ships with saddles for freight allowance
?
information on size, style, pieces/ bundle, and pieces per carton.
APPLICATIONS
INSULATION COMPONENTS Wood I-Blocks are made to support pipe sizes ranging from
1/2" to 30" outside diameter. IC Blocks are for use on plumbing and HVAC mechanical
piping systems with temperatures ranging from -120i to +350i °F.
NOTE:
When applied with the correct wood block (See IC Wood I-Block Product Data Sheet)
of 10 linear feet.
INSULATION COMPONENTS Wood I-Blocks are placed inside the pipe insulation at the hanger and IC I-Shield location.
Before applying the pipe insulation, simply notch out the insulation with a insulation knife and replace insulation piece with the
appropriate sized wood I-Block. (see sizing chart for recommended block size.) Proceed by applying the pipe insulation to the
pipe and then inserting the appropriate IC I-Shield.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC WOOD I-BLOCK
SUPPORT SHALL BE INSTALLED. ALSO EACH IC WOOD I-BLOCK SHALL BE EQUAL TO THE PIPE
INSULATION THICKNESS.
SIZE
1/2" x 1/2" x 5"
PCS/ BOX
300
PCS/ BUNDLE
25
1/2" x 3/4" x 5"
200
20
1" x 1" x 6"
300
12
1-1/2" x 1" x 6"
200
9
1-1/2" x 1-1/2" x 6"
150
6
2” x 1-1/2” x 6”
120
4
Call: (574) 258-1885 / Fax 866-565-0359
Specification Sheet
Hardwood I-Blocks
DESCRIPTION
INSULATION COMPONENTS HARDWOOD I-BLOCKS are used along with
IC I-Shields to ensure that the pipe insulation does not compress at each
hanger location. (See IC Hardwood I-Block product data sheet)
FEATURES
Choices of Hardwood or Pine wood I-Blocks - For use of best insulation support.
Each IC I-Block Bundled - to make for fast and easy handling.
Shipped along with IC I-Shields - ships with I-Shields for freight allowance
information on size, style, pieces/ bundle, and pieces per carton.
APPLICATIONS
INSULATION COMPONENTS Hardwood I-Blocks are made to support pipe sizes ranging from
1/2" to 30" outside diameter. IC I-Blocks are for use on plumbing and HVAC mechanical
piping systems with temperatures ranging from -120i to +350i °F.
NOTE:
When applied with the correct wood I-Block (See IC Hardwood I-Block Product Data Sheet)
IC Pipe I-Shields are made to withstand 5 PSI compressive strength on a maximum span
of 10 linear feet.
INSULATION COMPONENTS Hardwood I-Blocks are placed inside the pipe insulation at the hanger and IC Pipe IShield location. Before applying the pipe insulation, simply notch out the insulation with an insulation knife and replace
insulation piece with the appropriate sized wood I-Block. (see sizing chart for recommended I-Block size.) Proceed by
applying the pipe insulation to the pipe and then inserting the appropriate IC I-Shield.
WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC HARDWOOD I-BLOCK
SHALL BE INSTALLED. ALSO EACH IC WOOD I-BLOCK SHALL BE EQUAL TO THE PIPE INSULATION
THICKNESS.
SIZE
1/2" x 1/2" x 5"
PCS/ BOX
300
PCS/ BUNDLE
25
1/2" x 3/4" x 5"
200
20
1" x 1" x 6"
300
12
1-1/2" x 1"x 6"
200
9
1-1/2" x 1-1/2" x 6"
150
6
2" x 1-1/2" x 6"
120
4
2" x 2" x 6"
75
4
I-Tools Product Catalog Overview
Tackers & Staples
- Tackers and Staples shipped along with freight allowed orders.
- Top Brands of the Mechanical Insulation Industry
- Great economic brands
- Ships along with I-Shields for freight allowance
- Same day or next day on most orders
Knives & Sharpeners
- Great for on the job cutting of Pipe Insulation
- Great economic brands Russell - Dexter, AccuSharp
Mechanical Insulation Gloves
- Great for on the job handling for Pipe Saddles and Steel Jacketing
Shears & Scissors
- Great for on the job Shearing and cutting of ASJ Paper
- Great economic brands like FISKARS
Caulk Guns
-
Used for the Adhesive Caulk and Silicone Caulk
Great economic brands
Ships along with I-Shields for freight allowance
Same day or next day on most orders
Snips & Hand Seamers
- Great for on the Job Cutting of Banding and Metal Jacketing
- Great economic brands Like WISS
Call: (574) 258-1885 / Fax 866-565-0359
I-Tools Product Catalog Overview
Snips & Shears
-
Great for on the Job Cutting of Banding and Metal Jacketing
Great economic brands Like WISS
Knives & Sharpeners
- Great for on the job cutting of Pipe Insulation
- Great economic brands Dexter-Russell & AccuSharp
Tape Measurers
-
Great for on the job measurements
Great economic brands like Stanley & Lufkin
Pliers & Side Cuts
- Hand tools for cutting Banding and wire ties
Adhesive Guns
-
Your Great source for Adhesive Guns for gluing Rubber Insulation
Wooden Handle Chip Brushes
- Sanded Wooden Handle
- For use with epoxy and adhesives on rubber pipe insulation
- Great Economic Prices
I-Tools Product Catalog
Chip & Dope Brushes
Features
-
Sanded Wooden Handle
For use with epoxy and adhesives on rubber pipe insulation
Great Economic Prices
DESCRIPTION
1/2" Chip/ Dope Brush
ITEM #
IC-1F
PCS/ CARTON
36
1" Chip Brush
IC-1A
36
1-1/2" Chip Brush
IC-1B
36
2" Chip Brush
IC-1C
24
3" Chip Brush
IC-1D
12
Call: (574) 258-1885 / Fax 866-565-0359
Adhesive Guns & Accessories
Features
-
Your Great source for Adhesive Guns for gluing Rubber Insulation
DESCRIPTION
1PT Black Adhesive Gun w/ Flex Spout
ITEM #
IC-18A
PCS/ CARTON
1
8oz Black Adhesive Gun w/ flex Spout
IC-18B
1
6oz Red PVC Adhesive Gun
IC-18C
1
Black Adhesive Gun w/ Brush Head
IC-18D
1
IC-18E
1
Brush Head Replacement for IC-18D
TACKERS & STAPLES
Features
-
Tackers and Staples shipped along with freight allowed orders.
Top Brands of the Mechanical Insulation Industry
Great economic brands like Bostitch & Markwell
DESCRIPTION
Arrow T50 Tacker Gun
ITEM #
IC-4A
PCS/ CARTON
1
Bostitch T6-8 Outward Clinch Tacker
IC-4C
1
Markwell G-26 Outward Clinch Tacker
IC-5A
1
Markwell G-26 Tacker Replacement Head
IC-5AA
1
Markwell G-5 Outward Clinch Tacker
IC-5B
1
Bostitch STCR5019 3/8" Staples
IC-4C38
1
Bostitch STCR5019 1/2" Staples
IC-4C12
1
Markwell STCR2619 3/8" Staples
IC-5A38
1
Markwell STCR2619 1/2" Staples
IC-5A12
1
Call: (574) 258-1885 / Fax 866-565-0359
I-ToolsProduct Catalog
Knives & Sharpeners
Features
-
Great for on the job cutting of Pipe Insulation
Great economic brands Dexter-Russell & AccuSharp
DESCRIPTION
Dexter-Russell 6" Wide Blade Boning Knife
ITEM #
IC-9A
PCS/ CARTON
1
Dexter-Russell 6" Narrow Blade Boning Knife
IC-9B
1
Dexter-Russell 6" Curved Blade Boning Knife
IC-9C
1
Dexter-Russell 6" Scalloped Boning Knife
IC-9D
1
Dexter-Russell Harrington #421 Shoe Knife
IC-9E
1
Dexter-Russell 6" Rubber Knife
IC-9F
1
IC-9G
1
Black Utility Knife
IC-10A
1
Utility Knife 100Pk Blade Replacements
IC-10B
1
Folded Utility Knife
IC-10C
1
Smith's Knife Sharpener
IC-11A
1
AccuSharp Knife and Tool Sharpener
IC-11B
1
10" Carb File w/ Red Handle
IC-11C
1
14" Tapered File w/ Wooden Handle
IC-11D
1
Pliers & Side Cuts
Features
-
Hand tools for cutting banding and wire ties
Channellocks for loosening or tightening clevis hangers
DESCRIPTION
6" Side Cut Pliers
ITEM #
IC-6A6
PCS/ CARTON
1
7" Side Cut Pliers
IC-6A7
1
7" Lineman Pliers
IC-6A7B
1
8" Lineman Pliers
IC-6A8
1
Channellock 8” Tongue & Groove Pliers
IC-6AA
1
Call: (574) 258-1885 / Fax 866-565-0359
Scissors & Shears
Features
-
Great for on the job Shearing and cutting of ASJ Paper
Great economic brands like FISKARS
DESCRIPTION
FISKARS 9" Bent Stainless Steel Shear
ITEM #
IC-8A
PCS/ CARTON
1
FISKARS 9" Industrial Shear
IC-8B
1
FISKARS 9-1/2" Titanium Shear
IC-8C
1
FISKARS 9" Multipurpose Shear
IC-8D
1
Shrink Wraps & Tapes
Features
-
Heavy gauged Shrink Wrap for wrapping skids
Clear Tape for box packaging
DESCRIPTION
Clear Box Tape 3" x 50YDS
ITEM #
IC-20A
PCS/ CARTON
24/CS
70 Gauge Stretch Wrap 5" x 1000'
IC-20A
12/CS
80 Gauge Stretch Wrap 18" x 1500'
IC-20A
4/CS
Features
-
ASJ tape used for keeping a good vapor barrier between joints
Great economic brands like Venture Tapes & Nashua
DESCRIPTION
Nashua Foil Tape 3" x 110YDS
Venture White ASJ Tape 3" x 50YDS
ITEM #
IC-14A
PCS/ CASE
1
IC-15A
Call: (574) 258-1885 / Fax 866-565-0359
1
Banders & Tensioners
Features
-
Great for on the job Banding of Tanks, piping and vessels
Great economic brands like MIP, Inc.
DESCRIPTION
MIP 1200 Economy Bander/ Tensioner
ITEM #
IC-22A
PCS/ CARTON
1
MIP 1800 Pitsol Grip Bander/ Tensioner
IC-22B
1
MIP 2100 Economy Steel Strap Cutters
IC-22C
1
Tape Measures & Folding Wooden Rule
Features
-
Great economic brands like Stanley and Lufkin
DESCRIPTION
Lufkin Tape Measure 3/4" x 12'
ITEM #
IC-3A
PCS/ CARTON
1
Lufkin Tape Measure 1" x 25'
IC-3B
1
Stanley Tape Measure 1" x 25'
IC-3C
1
Stanley Tape Measure 1" x 30'
IC-3D
1
Lufkin Folding Rule 6'
IC-3E
1
Call: (574) 258-1885 / Fax 866-565-0359
Snips & Hand Seamers
Features
-
Great for on the Job Cutting of Banding and Metal Jacketing
Great economic brands Like WISS
DESCRIPTION
WISS Snips-Left Offset Yellow Handle
ITEM #
IC-7A
PCS/ CARTON
1
WISS Snips-Right Offset Red Handle
IC-7B
1
WISS Snips-Straight Cut Green Handle
IC-7C
1
WISS Snips-Straight Pattern 9-3/4"
IC-7D
1
IC-7E
1
IC-7F
1
WISS 3” Hand Seamer
IC-7G
1
Pipe Caliper/ Divider & Mechanical Insulation Gloves
Features
-
Small and Compact for your tool pouch.
DESCRIPTION
1/2" to 12" Pipe/ Tubing Caliper
GENERAL 8" Divider
Features
-
ITEM #
IC-26A
PCS/ CARTON
1
IC-26B
1
Great for on the job handling for Pipe Saddles and Steel Jacketing
DESCRIPTION
Rubber Coated Gloves Small
ITEM #
IC-21A
PCS/ CARTON
12
Rubber Coated Gloves Medium
IC-21B
12
Rubber Coated Gloves Large
IC-21C
12
Rubber Coated Gloves X-Large
IC-21D
12
Call: (574) 258-1885 / Fax 866-565-0359
Apprentice Starter Tool Kit ITEM # IC-27A
Features
-
Great for a apprentice looking for a start up kit
Caddy Tool Bag features a 61 pocket multi functional organizer.
Great economic brands like Dexter-Russell, WISS, FISKARS and many more.
DESCRIPTION
CADDY 3.5-5 Gallon Bucket Tool Bag
ITEM #
IC-25A
PCS/ KIT
1
1/2" to 12" Pipe/ Tubing Caliper
IC-26A
1
WISS Snips-Right Offset Red Handle
IC-7B
1
WISS Snips-Straight Cut Green Handle
IC-7C
1
FISKARS 9" Multipurpose Shear
IC-8D
1
Black Utility Knife
IC-10A
1
Lufkin Tape Measure 1" x 25'
IC-3B
1
AccuSharp Knife and Tool Sharpener
IC-11B
1
IC-9G
1
Dexter-Russell 6" Wide Blade Boning Knife IC-9A
Channellock 8” Tongue & Groove Pliers
IC-6AA
1
Insulation Components, Inc. manufactures and stocks a wide variety of I-Shields and
ships throughout the United States. We also distribute other quality mechanical insulation
products. Contact us by calling 574-258-1885 so we may quote your product needs.
13301 Chippewa Blvd., Mishwaka, Indiana 46545
Phone 574-258-1885 / Fax 866-565-0359
IC Sizing Chart
IC STANDARD I-SHIELDS
O.D. Size
2.0 - 5.5
6.0 - 14.5
15.0 - 28.0
GA.
22Ga.
20Ga.
18Ga.
PACKAGED IN BUCKETS
OR BOXES
LENGTH
12”
12”
12”
FOR IC MSS SERIES
O.D. Size
1/2” - 3-1/2”
4”
5” & 6”
8” - 14”
16” - 24”
GA. LENGTH
18Ga. 12”
16Ga. 12”
16Ga. 18”
14Ga. 24”
12Ga. 24”
EACH I-SHIELD MARKED
w/ O.D. SIZE
VARIOUS SIZES & STYLES
MADE IN THE
Phone: 574-258-1885
Fax: 866-565-0359
USA
www.insulationcomponents.com
orders@insulationcomponents.com
M ANUFACTURED AND STOCKED IN M ISHAWAKA, INDIANA

File - Insulation Components, Inc.

Transcription

Similar documents

Jetons De Poker Ceramiques Casino Replica

BuildTog Flyer

Astro-Foil RI bro

Fernco Flexible Coupling Installation - Fernco

Hymax Couplings 1.5

microtherm® overstitched

Fernco Flexible Coupling Installation - Fernco

Heavy Density Pipe Insulation

Still Favored by Chocolate Factory

Specifications and Info