Warthog Catalogue

Transcription

Warthog Catalogue

13og
0l
2ata
C
The Industry’s mosT
&
Powerful
Durable tools
page 24
page 25
StoneAge is proud to offer a new line of Hydro-excavation
jetting tools. Three options available for different applications
•HX-101 - Single Head Assembly
•HX-103S - Triple Straight Head Assembly
•HX-200 - Hydro-X Lance Assembly
Maximimze your tool lineup. Inexpensive add-ons to get
the most out of your tools.
•Manhole cleaner Warthog WG-1 Conversion Kit
•Descaling heads Removal of Scale and Minerals
•Centralizers for 6-36” Diameter Lines
New! Hydro-X Kits
WARTHOG ACCESSORIES
Catalog Contents
WARTHOG
sEWER TOOLS
BY sTONEaGE
Specialists in High Pressure Waterblasting Equipment, our mission is to lead the world in providing
innovative sewer cleaning tools and superior customer service.
over 60
Dealers in
12 countries
StoneAge dealers are highly specialized in their respective fields, and are able to supply a complete range
of high pressure pumps, systems, accessories.
www.sewernozzles.com
One of the most comprehensive websites in the industry. Featuring Tool Manuals, Jetting Charts, Service Videos and
worldwide Dealer listings.
2
1-866-795-1586 | www.sewernozzles.com
catalog contents
The WARTHOG Line
2-6”
(51-152 mm)
This catalog is color-coded in sections by pipe size as shown below
small lines
Pages 4-7
WV-1/4 2-4” Lines. For cart and trailer jetters. New, high-speed rotation technology for small
lines with light to moderate blockages. Pages 4-5.
WT-3/8-C 3-6” Lines. For cart and trailer jetters. Now standard with carbide buttons for longer
head life. Pages 6-7.
your warthog
maximize
NEW!
8-36”
(203-914 mm)
4-18”
(102-457 mm)
Medium Lines
Pages 8-17
WS-1/2 4-8” Lines. For trailer jetters. Sold with a 2 ft. whip hose standard. Also jointed and
rigid models, plus inlet options. Pages 8-9
WH-1/2 6-18” Lines. A real workhorse with 1/2” and 3/4“ inlet options, both inlets available in
NPT or BSPP. Pages 10-11.
WHP-3/4 6-18” Lines. Maximum Puller WHP-3/4. Designed for more pulling power. Pages
12-13.
large Lines
Pages 18-23
WG-1 & WGP-1 (Puller) 8-36” Lines. WG-1 Classic and the Maximum Puller
WGP-1. Designed for more pulling power. Pages 18-21.
WD 1-1/4 8-36” Lines. For Municipal jetters. This is a high flow model with up to 120
gpm (450 lpm) flows. Pages 22-23.
Hydro Excavation
Page 24
Hydro-x Hydro-Excavation provides safe access to buried utilities by potholing or trenching with
high pressure water. Page 24.
accessories
Pages 25-27
manhole cleaner Our latest modification kit to convert your Warthog into an effective
Manhole Cleaner. Page 25.
Centralizers Several different styles available including multi-wheeled models for cleaning
extra lare pipes. Page 25.
descaling jets Your existing Warthog can easily be converted into a powerful descaling
tool by simply changing the head. Pages 26-27.
www.stoneagetools.com | 1-866-795-1586
3
2”-4” Lines
Patented high-speed rotation combined with low maintenance creates a powerful tool for 2”-4” lines.
WV-1/4
WV-1/4
2”-4” Lines (51-102 mm)
2”-4” Lines with Elbows
Up to 5k psi (350 bar)
3-8 gpm Flows (11-30 l/min)
High-Speed Technology
The WV-1/4 uses the new flow-through technology and features a revolutionary
high-speed design with no high pressure seals or bearings to service. It cleans lines as
small as 2” with long sweeping elbows. This new design also features permanent, predrilled orifices. The tool operates from 2-5k psi (140-350 bar) and 3-8 gpm (11-30 l/
min). It has a 1/4” NPT pipe thread inlet and if a 1/4” NPT hose fitting is used the tool
can pass through long radius elbows in 2” and larger lines.
Contact StoneAge for more information on the hose requirements. There are no
maintenance or overhaul kits due to the low maintenance design. For more information
and video clips of the tool at work visit our web at www.sewernozzles.com.
Now rated up to 5000 psi (350 bar)
WV-1/4 Specs
Maximum Pressure
5k psi
350 bar
Operating Pressure
2-5k psi
140-350 bar
Rotation Speed
Flow
WV-1/4 Tool Head Options
Part Number
4
Front Jet
Back Jets
Flow
WV-1/4-A
.024 in.
.6 mm
2 x .052 in. 1.3 mm
7-8 gpm
26-30 l/min
WV-1/4-B
.020 in.
.5 mm
2 x .039 in. 1.0 mm
5-6 gpm
15-23 l/min
3-8 gpm
Flow Rating
Pulling Force
Inlet Connection
11.4-30.3 l/min
0.8 Cv
4-9 lb
40 N
1/4 NPT or BSPP
Tool Diameter
with Centralizer
1.3 in.
33 mm
Length
2.0 in.
51 mm
WV-1/4-C
.018 in.
.45 mm
2 x .032 in.
.8 mm
4-4.5 gpm 15-17 l/min
Nozzle Ports
WV-1/4-D
.018 in.
.45 mm
2 x .028 in.
.7 mm
3-3.5 gpm 11-13 l/min
Weight Complete
High-Speed
3 Drilled
0.45 lb
0.20 kg
2”-4” Lines
WV-1/4
small lines
This model comes with permanent, pre-drilled orifices. See the chart on the opposite page for standard head options.
WV 040*
Head
WV 003
Body
WV 001
Shaft
WV 002-P4*
Inlet Nut
WV 010
Retaining Ring
WV 008
O-Ring
*See charts on the opposite page for inlet nut and jetting options.
This is a low-maintenance tool. There are no maintenance or overhaul kits. However, the WV 612 tool kit is available for easy tool disassembly.
Van-Pac System
Courtesy of Harben, Inc.
Safety First!
If a WV-1/4 is being used in pipes larger than 4” in diameter, a rigid
stinger should be installed between the tool inlet and the hose end.
Otherwise the tool can turn around inside the line (as shown below) and
come back toward the operator, causing serious injury or death.
Potential Hazard!
Stinger not in use here.
Tool is backing out of
the pipe.
WV-1/4 in 8” pipe.
5
3”-6” Lines
WT-3/8-C with extended-life carbide buttons, now standard on every model.
WT-3/8-C
WT-3/8-C
3”-6” Lines (76-152 mm)
Our smaller classic WARTHOG models have all the powerful features of the larger tools
but can negotiate elbows and clean-outs commonly found in laterals at homes, buildings,
restaurants and other light commercial facilities. The WT-3/8-c is designed
specifically to handle 3”-6” lines and clean-outs. This tool is most
commonly used on small capacity pumps and cart jetters. We’ve
added permanent carbide buttons to the WT-3/8-C model,
specifically designed to handle demanding applications.
Pipes made of cast iron and those that have sand or silt can
act as abrasive agents that can aggressively wear out the tool.
Our carbide buttons are available in all offsets and add up to
5 times the life compared to previous WT-3/8 models. It also
features replaceable AP2 nozzles.
Spartan Soldier
Courtesy of Spartan
Maintenance & Overhaul Kits
Classic Workhorse Model
WT-3/8-C Specs
Maximum Pressure
5k psi 350 bar
Operating Pressure
1500-5k psi 100-350 bar
Rotation Speed
Flow
6
WT 600 - Service Kit
WT 610 - Overhaul Kit
WT 602 - Seal Kit
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1 RJ 011-K
Brass Seat
1 RJ 012-KTO H.P. Seal & O-Ring
1 WT 014
Wave Spring
BC 410
BJ 026
BJ 048-S
BJ 062-S
GP 025-P2
RJ 011-K
RJ 012-KTO
WT 014
Syringe Assembly
Port Plug
Visc. Fluid Slow, 6oz.
Antiseize, 2g
Hex Socket Plug
Brass Seat
H.P. Seal & O-Ring
Wave Spring
BJ 026
BJ 048-S
RJ 011-K
RJ 012-KTO
WT 006
WT 007
WT 008
WT 010
WT 014
WT 032
WT 030
Port Plug
Visc. Fluid Slow, 6oz.
Brass Seat
H.P. Seal & O-Ring
Seal
Bearing, Ball
O-Ring
Seal
Wave Spring
Retaining Ring
O-Ring
WT 612 - Tool Kit
1 BA 100
1 WT 105
Retaining Ring Pliers
Tool
300-500 rpm
5-12 gpm 20-45 l/min
Flow Rating
0.75 Cv
Pulling Force
5-20 lb 22-90 N
Inlet Connection
3/8 NPT or BSPP
Tool Diameter
1.9 in. 48 mm
Length
3.0 in. 76 mm
Nozzle Ports
Weight Complete
3 x 1/8 NPT
1.2 lb .54 kg
The WT-3/8-C is your tool of choice for cutting
roots, clearing ice and removing blockages.
3”-6” Lines
WT-3/8-C
WT 001
Shaft
WT 032
Retaining Ring
WT 002
Sleeve
WT 010
Shaft Seal
WT 014
Wave Spring
WT 007
Bearings
RJ 012-KTO
H.P. Seal
WT 033
Retaining Ring
RJ 011-K
Brass Seat
WT 006
Shaft Seal
WT 008
O-Ring
AP2
Nozzles
WT 040-R60 or
WT 040-R31 Head
BJ 026
Port Plug
small lines
WT 030
O-Ring
WT 050
Carbide Buttons
WT-3/8-C Jetting Chart
Pump PressurePump Output
2000 psi / 140 bar
150 ft Hose
w/ 3/8” ID
2000 psi / 140 bar
300 ft Hose
w/ 3/8” ID
4000 psi / 280 bar
150 ft Hose
w/ 3/8” ID
AP2 022
AP2 038
6 gpm
22 l/min
R60
AP2 024
AP2 042
7 gpm
26 l/min
R60
AP2 026
AP2 047
8 gpm
30 l/min
R31
AP2 026
AP2 052
9 gpm
34 l/min
R31
AP2 029
AP2 052
10 gpm
38 l/min
R31
AP2 029
AP2 057
11 gpm
42 l/min
R31
AP2 029
AP2 063
12 gpm
45 l/min
R31
AP2 029
AP2 069
5 gpm
19 l/min
R60
AP2 022
AP2 038
6 gpm
22 l/min
R60
AP2 024
AP2 042
7 gpm
26 l/min
R60
AP2 026
AP2 047
8 gpm
30 l/min
R31
AP2 026
AP2 052
9 gpm
34 l/min
R31
AP2 029
AP2 057
38-45 l/min
R31
AP2 029
AP2 063
5 gpm
19 l/min
R60
AP2 022
AP2 035
6 gpm
22 l/min
R60
AP2 024
AP2 038
7 gpm
26 l/min
R60
AP2 026
AP2 042
8 gpm
30 l/min
R60
AP2 026
AP2 042
9 gpm
34 l/min
R31
AP2 029
AP2 047
R31
AP2 029
AP2 052
12 gpm
45 l/min
R31
AP2 029
AP2 057
5 gpm
19 l/min
R60
AP2 022
AP2 035
6 gpm
22 l/min
R60
AP2 024
AP2 038
7 gpm
26 l/min
R60
AP2 026
AP2 042
8 gpm
30 l/min
R31
AP2 026
AP2 047
9 gpm
34 l/min
R31
AP2 029
AP2 047
10 gpm
38 l/min
R31
AP2 029
AP2 052
11 gpm
42 l/min
R31
AP2 029
AP2 057
12 gpm
45 l/min
R31
AP2 029
AP2 063
5 gpm
19 l/min
R60
AP2 022
AP2 032
6 gpm
22 l/min
R60
AP2 024
AP2 035
7 gpm
26 l/min
R60
AP2 026
AP2 038
8 gpm
30 l/min
R31
AP2 026
AP2 042
9 gpm
34 l/min
R31
AP2 029
AP2 042
R31
AP2 029
AP2 047
10-11 gpm 38-42 l/min
4000 psi / 280 bar
300 ft Hose
w/ 3/8” ID
Rear Jets (2) 150˚
R60
10-11 gpm / 38-42 l/min
3000 psi / 210 bar
300 ft Hose
w/ 3/8” ID
Front Jet 15˚
19 l/min
10-12 gpm
3000 psi / 210 bar
150 ft Hose
w/ 3/8” ID
Head Offset
5 gpm
12 gpm
45 l/min
R31
AP2 029
AP2 052
5 gpm
19 l/min
R60
AP2 022
AP2 032
6 gpm
22 l/min
R60
AP2 024
AP2 035
7 gpm
26 l/min
R60
AP2 026
AP2 038
8 gpm
30 l/min
R31
AP2 026
AP2 042
9 gpm
34 l/min
R31
AP2 029
AP2 042
10 gpm
38 l/min
R31
AP2 029
AP2 047
42-45 l/min
R31
AP2 029
AP2 052
11-12 gpm
7
4”-8” Lines
The WS-1/2 features several inlet options, including jointed and rigid models, with or without a whip hose.
WS-1/2
4”-8” Lines
WS-1/2
4”-8” Lines (102-204 mm)
The WS-1/2 is designed to handle 4”-8” lines and is most commonly
used with trailer jetters. Operators use these tools to clean lines in
restaurants, hospitals, multi-story apartment buildings, residential, and
other applications. You can expect to remove grease, cut roots, ice and soil
blockages. It is also available in a 1/2” BSPP inlet option.
WS-1/2-J &
WS-1/2-J-BSPP
Jointed Inlet Models
These jointed options allow the inlet hose to bend to the side which
shortens the rigid length of the tool and makes access into clean outs
and limited access applications much easier. Inlet ports for this model
are available in either a 1/2” NPT or BSPP.
3 Models Available
WS-1/2 Specs
Maximum Pressure
5k psi
350 bar
Operating Pressure
1500-5k psi
100-350 bar
Rotation Speed
Flow
200-500 rpm
8-20 gpm
30-76 l/min
Flow Rating
1.3 Cv
WS-P8
Optional Rigid Inlets
Pulling Force
9-27 lb
Tool Diameter
1.9 in.
48 mm
The WS-P8 is an excellent option for straight pipes. The need for a
whip hose is eliminated, allowing you to connect the hose directly to the
tool. It is available with a female 1/2” NPT or BSPP connection. In this
configuration 4” 90˚ bends are no longer negotiable.
Length
4.4 in.
112 mm
Inlet Connection
1/2 NPT & BSPP
Nozzle Ports
Weight Complete
40-120 N
3 x 1/8 NPT
2.95 lb
We now offer an optional 35 ft. hose
with a 1/2” NPT inlet. WS 020-35
8
1.33 kg
4”-8” Lines
WS 080
Centralizer
WS 020
Hose Assembly
RJ 011
Seat
RJ 012-TO
H.P. Seal
WS 021
Weep Seal
WS 001
Shaft
WS-1/2-J
WS 029
Shaft Seal
WS 003
Body
WS 010
Shaft Seal
BJ 026
Port Plug
RJ 008
O-Ring
WS 040-R3 or
WS 040-R5 Head
WS-P8
Inlet Area Parts
Inlet Area Parts
WS 202 WS 208
Face
O-Ring
TJ 007
Bearings
WS 002
Inlet Nut
medium lines
WS-1/2
WS 203
Nipple
WS 210
O-Ring
WS 201
Nut
RJ 008
O-Ring
WS 020
Hose
RJ 008
O-Ring
WS 010
Seal
WS 002-P8
Inlet Nut
WS 210
O-Ring
WS-1/2 Service & Overhaul Kits
WS 600 -Service Kit
1
1
1
1
1
1
BC 410
BJ 048-S
BJ 062-S
GP 025-P2
RJ 011
RJ 012-TO
Syringe Assembly
Visc. Fluid, 6oz.
Antiseize, 2g
Hex Socket Plug
Brass Seat
H.P. Seal & O-Ring
WS 610 -Overhaul Kit
1 BJ 026
Port Plug
1 BJ 048-S Visc. Fluid, 6oz.
1 BJ 062-S Antiseize, 2g
1 RJ 008
O-Ring
1 RJ 011
Brass Seat
1 RJ 012-TO H.P. Seal & O-Ring
3 TJ 007
Ball Bearings 1 WS 010
Small Seal
1 WS 021-S Weep Seal
1 WS 029
Large Seal
WS 610-J -Overhaul Kit
1 BJ 026
Port Plug
1 BJ 048-S Visc. Fluid, 6oz.
1 RJ 008
O-Ring
1 RJ 011
Brass Seat
3 TJ 007
Ball Bearings 1 WS 010
Small Seal
1 WS 029
Large Seal
1 WS 208
O-Ring
2 WS 210
O-Rings
WS 612 -Tool Kit
1 TJ 064
Fill Tube
1 WS 105
Tool
WS 602 -Seal Kit
1 RJ 011
Brass Seal
9
4”-8” Lines
WS-1/2
WS-1/2 Jetting Chart
Pump Pressure
2000 psi / 140 bar
500 ft Hose
w/ 1/2” ID
Pump Output
3,000 psi / 210 bar
500 ft Hose
w/ 1/2” ID
3,500 psi / 240 bar
500 ft Hose
w/ 1/2” ID
4000 psi / 280 bar
500 ft Hose
w/ 1/2” ID
10
Front Jet 15˚
Rear Jets (2) 150˚
8 gpm
30 l/min
R5
AP2 026
AP2 052
10 gpm
40 l/min
R5
AP2 029
AP2 057
12 gpm
45 l/min
R5
AP2 032
AP2 063
14 gpm
50 l/min
R3
AP2 032
AP2 075
R3
AP2 035
AP2 098
16-18 gpm 60-75 l/min
2,500 psi / 170 bar
500 ft Hose
w/ 1/2” ID
Head Offset
8 gpm
30 l/min
R5
AP2 026
AP2 047
10 gpm
40 l/min
R5
AP2 029
AP2 057
12 gpm
45 l/min
R3
AP2 032
AP2 063
14 gpm
50 l/min
R3
AP2 032
AP2 069
16 gpm
60 l/min
R3
AP2 035
AP2 075
18 gpm
70 l/min
R3
AP2 038
AP2 082
8 gpm
30 l/min
R5
AP2 026
AP2 047
10 gpm
40 l/min
R5
AP2 029
AP2 052
12 gpm
45 l/min
R3
AP2 032
AP2 057
14 gpm
50 l/min
R3
AP2 032
AP2 063
16 gpm
60 l/min
R3
AP2 035
AP2 069
18 gpm
70 l/min
R3
AP2 038
AP2 075
8 gpm
30 l/min
R5
AP2 026
AP2 042
10 gpm 40 l/min
R5
AP2 029
AP2 047
12 gpm 45 l/min
R3
AP2 029
AP2 052
14 gpm 50 l/min
R3
AP2 032
AP2 063
16 gpm 60 l/min
R3
AP2 035
AP2 069
18 gpm 70 l/min
R3
AP2 038
AP2 075
8 gpm
30 l/min
R5
AP2 026
AP2 042
10 gpm 40 l/min
R5
AP2 029
AP2 047
12 gpm 45 l/min
R3
AP2 032
AP2 052
14 gpm 50 l/min
R3
AP2 032
AP2 057
16 gpm 60 l/min
R3
AP2 035
AP2 063
18 gpm 70 l/min
R3
AP2 038
AP2 069
medium lines
4”-8” Lines
Trailer Jetter Courtesy of US Jetting
11
6”-18” Lines
The tool of choice for smaller municipal lines and larger residential lines.
WH-1/2
& WH-3/4
WH-1/2 & 3/4
6”-18” Lines (152-457 mm)
2 Inlet Options
6”-18” Lines
The WH-1/2 and the WH-3/4 are the same tool offered with different inlet
ports, either 1⁄2” or 3⁄4” NPT or BSPP. The WH models are best for 6”-18” lines
(152-457 mm). These tools are most commonly used with small capacity combination
trucks and large trailer jetters. Descaling Heads are available for both models. Please
see page 26 for examples.
WH-1/2 & WH-3/4 Specs
Maximum Pressure
Operating Pressure
8k psi
1500-8k psi
Rotation Speed
Flow
Inlet Connection
Trailer Jetter Courtesy of Mongoose
150-300 rpm
40-170 l/min
3.0 Cv
18-50 lb
80-220 N
1/2 NPT or BSPP & 3/4 NPT or BSPP
Length
7.5 in.
191 mm
Diameter Incl. Cent.
3.4 in.
86 mm
Nozzle Ports
Weight Complete
12
100-550 bar
10-50 gpm
Flow Rating
Pulling Force
550 bar
3 x 1/8 NPT
4.7 lb
2.1 kg
6”-18” Lines
WH-1/2 & WH-3/4
RJ 021-S
Weep Seal
WH 002-P12 or
WH 002-P8 Inlet Nut
RJ 008
O-Ring
WH 010
Shaft Seal
WH 080
Centralizer
RJ 014
Wave Spring
TJ 007
Bearing
WH 001
Shaft
TJ 011
Seat
WH 012
H.P. Seal
TJ 007
Bearing
WH 010
Shaft Seal
WH 003
Body
medium lines
WH 040-R45
Head
AP2 Nozzle
WH-1/2 & WH-3/4 Service & Overhaul Kits
WH 600 - Service Kit
1 BJ 048-F
Viscous Fluid Fast, 6oz.
1 BJ 062-S
Antiseize, 2g
1 GP 025-P2
Hex Socket Plug
1 TJ 011
Brass Seat
1 WH 012-O
H.P. Seal & O-Ring
WH 610 - Overhaul Kit
1 BJ 048-F
1 BJ 062-S
Antiseize, 2g
1 RJ 008
O-Ring
1 TJ 011
Brass Seat
1 WH 012-O
H.P. Seal & O-Ring
2 TJ 007
Ball Bearing 2 WH 010
Shaft Seal
1 RJ 021-S
Weep Seal
1 RJ 014
Wave Spring
WH 612 - Tool Kit
1 TJ 064
Fill Tube
1 WH 105
Tool
WH 602 - Seal Kit
1 TJ 011
Brass Seat
WH 012-O
H.P. Seal & O-Ring
Combination Truck Courtesy of Vactor
13
6”-18” Lines
WH-1/2 & WH-3/4
WH-1/2 Jetting Chart
Pump PressurePump OutputHead Offset
2000 psi (140 bar)
500 ft Hose
w/ 1/2” ID
3000 psi (210 bar)
500 ft Hose
w/ 1/2” ID
4000 psi (280 bar)
500 ft Hose
w/ 1/2” ID
Front Jet 15˚Rear Jets (2) 150˚
14 gpm
55 l/min
R8
AP2 032
AP2 075
16 gpm
60 l/min
R8
AP2 035
AP2 082
18 gpm
70 l/min
R8
AP2 035
AP2 090
20 gpm
75 l/min
R8
AP2 035
AP2 098
12 gpm
45 l/min
R8
AP2 029
AP2 057
14 gpm
55 l/min
R8
AP2 032
AP2 063
16 gpm
60 l/min
R8
AP2 035
AP2 069
18 gpm
70 l/min
R8
AP2 038
AP2 075
20 gpm
75 l/min
R8
AP2 038
AP2 082
12 gpm
45 l/min
R8
AP2 032
AP2 052
14 gpm
50 l/min
R8
AP2 032
AP2 057
16 gpm
60 l/min
R8
AP2 035
AP2 063
18 gpm
65 l/min
R6
AP2 038
AP2 069
20 gpm
75 l/min
R6
AP2 038
AP2 075
25 gpm
95 l/min
R6
AP2 038
AP2 082
WH-3/4 Jetting Chart
2000 psi / 140 bar
500 ft Hose
w/ 3/4” ID
3000 psi / 210 bar
500 ft Hose
w/ 3/4” ID
4000 psi / 280 bar
500 ft Hose
w/ 3/4” ID
14
20 gpm
95 l/min
R6
AP2 038
AP2 082
30 gpm
115 l/min
R45
AP2 042
AP2 106
40 gpm
150 l/min
R3
AP2 047
AP2 135
20 gpm
75 l/min
R6
AP2 038
AP2 075
25 gpm
95 l/min
R45
AP2 042
AP2 082
30 gpm
115 l/min
R45
AP2 042
AP2 090
35 gpm
130 l/min
R3
AP2 042
AP2 106
40 gpm
150 l/min
R3
AP2 047
AP2 115
45 gpm
170 l/min
R3
AP2 047
AP2 125
20 gpm
75 l/min
R45
AP2 038
AP2 069
25 gpm
95 l/min
R45
AP2 042
AP2 075
30 gpm
115 l/min
R3
AP2 042
AP2 082
35 gpm
130l/min
R3
AP2 042
AP2 090
40 gpm
150 l/min
R3
AP2 047
AP2 098
6”-18” Lines
Tool TalK-Maximizing Your Pump’s Power
Hose
Pressure
Drop
A fourth important
factor is to balance
hose pressure drop
Trailer Jetter
for the pump being used.
Courtesy of O’Brien
Hose pressure drop is a direct,
proportional loss in power caused by
friction as water molecules slide across the wall of the hose and against
other water molecules in the hose. The only way to reduce pressure drop
is to use a shorter or a larger-diameter hose. Sewer cleaning requires
relatively long hoses and large-diameter hose is heavier and therefore more
difficult to pull through the pipe. So even in the best case, 20 to 25 percent
of a jetter’s power is lost to hose pressure drop. If you notice more powerful
jetting with a shorter hose, that’s because there is less pressure drop. It
can make sense to buy shorter lengths as replacements.
Managing the Numbers
Safety
The second important principle is to use the fewest jets possible. If one
good jet doesn’t cut through the deposits, then more of them will not do
better. Greater power is delivered to the surface with fewer, more powerful
jets, rotated to cover the entire surface in a helical jet path. For example, in
a nozzle using three or five jets, each jet is 2 to 2.5 times as powerful as
the non-rotating alternative.
Controlled Rotation
medium lines
Preserving Jet Quality
The first prerequisite for a successful job is excellent quality jets. A jet is the
stream of water after it has been forced through an orifice via high pressure.
The orifice is nothing more than a shaped restriction in the flow channel that
forces the water to accelerate,
converting potential energy
(pressure) into kinetic energy
(velocity). The orifice shape,
materials and upstream flow
turbulence are all important
to delivering maximum energy
to the work. The powerful,
cohesive, high-velocity jet is
Trailer Jetter
Courtesy of Jetters Northwest
established in the first 8 to 25
orifice diameters downstream
from the orifice. Farther away, the outside surface of the jet is slowed
by drag through the air. Even the best jet deteriorates with air drag. It is
possible, though, to lose as much as half the jet’s power at the start due to
excessively turbulent flow upstream of the nozzle tip.
Finally, safety should always be a top priority on the job and that’s
especially true when working with high pressure jetting nozzles. To prevent
a tool from “backing out” and turning toward the operator, we recommend
using a rigid pipe “stinger”. Centralizers can also eliminate the possibility of
tool turn around, as well as improving performance by allowing for nipple
extensions to deliver the jet power closer to the pipe wall, and protecting
the head of the tool from hitting the side walls.
Thirdly, the bigger the diameter of pipe, the slower the rotation
required. Large pipes or vessels may require air-motor-powered
gearboxes to keep rotation slow enough to maintain the necessary
transverse velocity at the wall. A good rule of thumb is to provide about 15
mph transverse jet velocity along the surface being cleaned. This rule works
whether the tool is cleaning a one-inch diameter heat exchanger tube, a 12
in. sewer pipe or a 40-foot-diameter crude oil storage facility.
Combination Truck Courtesy of VAC-CON
15
6”-18” Lines
The Whp-3/4 is excellent for longer lines and moderate inclines.
Whp-3/4
Whp-3/4
6”-18” Lines (152-457 mm)
Up to 40% More Thrust*
The new WhP-3/4 has been designed to produce more thrust than existing tools available
today. The rear facing jets have been angled more sharply and the centralizer fins have been
trimmed back. The result is more pulling power to handle longer lines, extra distance and
moderate inclines. It features 3 nozzle ports, including a boring jet offset at 15 degrees, and 2
jets at 162 degrees. The inlet port comes in either 3/4” npt or BSPP.
Whp-3/4 specs
Maximum Pressure
8k psi
550 bar
Operating Pressure
1500-4k psi
100-275 bar
Rotation Speed
Flow
150-300 rpm
15-50 gpm
Flow Rating
Pulling Force
Inlet Port
3.0 Cv
45-90 lb
Diameter Incl. Skid
3.4 in.
86 mm
Length
7.5 in.
190 mm
Weight Complete
16
200-400 Nm
1/2 NPT, 1/2 BSPP,
3/4 NPT, 3/4 BSPP
Nozzle Ports
Combination Truck Courtesy of Federal Signal
60-190 l/min
* With the front jet plugged.
3 x 1/8 NPT
4.7 lb
2.1 kg
6”-18” Lines
WHP-3/4
RJ 021-S
Weep Seal
RJ 008
O-Ring
WH 010
Shaft Seal
WH 102-P12 or WH 102-P8
WH 102-BSPP or WH 102-BSPP8 Inlet Nut
TJ 007
Bearing
WH 001
Shaft
TJ 007
Bearing
WH 010
Shaft Seal
WH 003
Body
TJ 011
Seat
WH 012
H.P. Seal
RJ 014
Wave Spring
AP2
Nozzle
medium lines
WHP 080
Centralizer
WHP 032
Retaining Ring
WHP 040-R5.1
Head
WHP-3/4 Jetting Chart
2000 psi / 140 bar
500 ft Hose
w/ 3/4” ID
3000 psi / 210 bar
500 ft Hose
w/ 3/4” ID
4000 psi / 280 bar
500 ft Hose
w/ 3/4” ID
30 gpm
115 l/min
R5
Plugged
AP2 106
30 gpm
115 l/min
R5
AP2 038
AP2 106
35 gpm
130 l/min
R5
Plugged
AP2 125
35 gpm
130 l/min
R5
AP2 038
AP2 125
40 gpm
150 l/min
R5
Plugged
AP2 135
40 gpm
150 l/min
R5
AP2 038
AP2 135
45 gpm
170 l/min
R5
Plugged
AP2 145
45 gpm
170 l/min
R5
AP2 042
AP2 145
25 gpm
95 l/min
R5
Plugged
AP2 090
25 gpm
95 l/min
R5
AP2 032
AP2 090
30 gpm
115 l/min
R5
Plugged
AP2 098
30 gpm
115 l/min
R5
AP2 038
AP2 098
35 gpm
130 l/min
R5
Plugged
AP2 106
35 gpm
130 l/min
R5
AP2 038
AP2 106
40 gpm
150 l/min
R5
Plugged
AP2 115
40 gpm
150 l/min
R5
AP2 042
AP2 115
20 gpm
75 l/min
R5
Plugged
AP2 075
20 gpm
75 l/min
R5
AP2 032
AP2 075
25 gpm
95 l/min
R5
Plugged
AP2 082
25 gpm
95 l/min
R5
AP2 038
AP2 082
30 gpm
115 l/min
R5
Plugged
AP2 090
30 gpm
115 l/min
R5
AP2 038
AP2 090
35 gpm
130 l/min
R5
Plugged
AP2 098
35 gpm
130 l/min
R5
AP2 038
AP2 098
17
8”-36” Lines
The WG-1 Classic is a municipal workhorse, handling 8”-36”lines (203-914 mm) with 50-80 gpm flows (190-300 l/min).
WG-1 Classic
8”-36” Lines
WG-1 Classic
8”-36” Lines (203-914 mm)
50-80 gpm Flows (190-300 l/min)
Classic Warthog Model
We offer three larger WARTHOG models to handle municipal, industrial and commercial
drain cleaning applications. By installing replaceable AP2 nozzle tips that are sized to
maximize the efficiency and effectiveness of your pump, these tools are highly productive.
They eliminate the need for using several types of specialty tools to complete the job.
The WG-1 Classic is the proven choice for municipalities who are faced with
cleaning pipes from 8”-36” (203-914 mm). Large combination trucks with 1” hose use
this tool predominately. Municipalities around the world rely on this tool to handle their
biggest challenges. Descaling head options are shown on page 26.
WG-1 Classic Specs
MODEL
Maximum Pressure
Operating Pressure
Rotation Speed
Flow
WG-1 Classic
5k psi
350 bar
1500-5k psi
50-80 gpm
Flow Rating
Pulling Force
Inlet Connection
Combination Truck
Courtesy of Hi-Vac
190-300 l/min
4.6 Cv
70-100 lb
310-450 Nm
1 NPT or BSPP
Length
9.1 in.
231 mm
4.8 in.
122 mm
Nozzle Ports
Weight Complete
18
100-350 bar
150-300 rpm
5 x 1/8 NPT
10.9 lb
4.9 kg
8”-36” Lines
WG-1 Classic
WGP 032
Retaining Ring
MJ 021-S
Weep Seal
WG 102
Inlet Nut
WG 008
O-Ring
BJ 010-D
Shaft Seal
WG 014
Wave Spring
MJ 011
Brass Seat
WG 007
Bearing
WG 001
Shaft
WG 007
Bearing
WG 080
Centralizer
HC 012-TO
H.P. Seal
BJ 010-D
Shaft Seal
WG 003
Body
WG 040-R5
Head
WG-1 & WGP-1 Service & Overhaul Kits
1
1
1
1
1
BJ 048-F Visc. Fluid Fast, 6oz.
BJ 062-SAntiseize, 2g
GP 025-P2
Hex Socket Plug
MJ 011
Brass Seat
HC 012-TO
H.P. Seal & O-Ring
WG 610 - Overhaul Kit
WG 612 - Tool Kit
2
1
1
1
1
2
1
1
1
1 HC 064
1 BJ 105
BJ 010-DShaft Seals
BJ 048-F
Visc. Fluid Fast, 6oz.
BJ 062-SAntiseize, 2g
MJ 011
Brass Seat
HC 012-TO
H.P. Seal & O-Ring
WG 007
Ball Bearings WG 008
O-Ring
WG 014
Wave Spring
MJ 021-S
Weep Seal
WG 602 - Seal Kit
1 MJ 011
1 HC 012-TO
Fill Tube
Tool
large lines
WG 600 - Service Kit Brass Seat
H.P. Seal & O-Ring
WG-1 Classic jetting chart
Pump PressurePump Output
1500 psi / 100 bar
600 ft Hose
w/ 1” ID
2000 psi / 140 bar
600 ft Hose
w/ 1” ID
2,500 psi / 170 bar
600 ft Hose
w/ 1” ID
3000 psi / 210 bar
600 ft Hose
w/ 1” ID
Head Offset15˚ Front Jet
Rear Jets (2)
Rear Jets (2)
60 gpm
225 l/min
R5
AP2 052
AP2 125
AP2 125
65 gpm
245 l/min
R5
AP2 052
AP2 125
AP2 125
80 gpm
300 l/min
R5
AP2 052
AP2 145
AP2 145
55 gpm
210 l/min
R5
AP2 047
AP2 098
AP2 106
60 gpm
225 l/min
R5
AP2 052
AP2 106
AP2 106
65 gpm
245 l/min
R5
AP2 057
AP2 115
AP2 115
80 gpm
300 l/min
R5
AP2 057
AP2 135
AP2 135
60 gpm
225 l/min
R5
AP2 052
AP2 098
AP2 106
65 gpm
245 l/min
R5
AP2 057
AP2 106
AP2 106
80 gpm
300 l/min
R5
AP2 063
AP2 125
AP2 115
50 gpm
190 l/min
R5
AP2 047
AP2 090
AP2 082
60 gpm
225 l/min
R5
AP2 052
AP2 098
AP2 090
65 gpm
245 l/min
R5
AP2 057
AP2 098
AP2 098
80 gpm
300 l/min
R5
AP2 063
AP2 106
AP2 115
19
8”-36” Lines
Note the streamlined centralizer fins, designed to accommodate the more severe rear facing jets and also provide easier retrieval of the tool in sewer lines.
WGP-1
WGP-1
50-80 gpm Flows (190-300 l/min)
8”-36” Lines (152-457 mm)
Maximum Pulling Power
Our new WGP-1 is designed to produce up to 40% more pulling power* than our
WG-1 Classic. The rear facing jets are angled more sharply and the centralizer
fins have been streamlined. We’ve also added two more centralizer fins for a total of six.
The result is more pulling power to navigate longer lines and moderate inclines, plus
easier retrieval of the tool. It features 5 jet ports, with a boring jet offset at 15˚ and four
jets at 155˚, plus the inlet port is available in either 1” NPT or BSPP. This tool will greatly
benefit contractors with operating pressures of 2,500 psi or less (172 bar or less).
Up to 40% More Thrust*
NOTE:
The Service and Overhaul Kits for this model
are the same as the WG-1. Please see page 19.
WGP-1 Specs
MODEL
Maximum Pressure
Operating Pressure
WGP-1
5k psi
1500-5k psi
Rotation Speed
Flow
350 bar
50-80 gpm
Flow Rating
Pulling Force
Inlet Connection
* With the front jet plugged.
20
450-623 N
1 NPT or BSPP
Length
9.1 in.
4.8 in.
Weight Complete
190-300 l/min
4.6 Cv
100-140 lb
Ports
Courtesy of GapVax
100-350 bar
150-300 rpm
231 mm
122 mm
5 x 1/8 NPT
10.9 lb
4.9 kg
8”-36” Lines
WGP-1
WG 080
Centralizer
MJ 021-S
Weep Seal
WG 102-x
Inlet Nut
WG 008
O-Ring
BJ 010-D
Shaft Seal
MJ 011
Brass Seat
WG 007
Bearing
WG 001
Shaft
WG 007
Bearing
BJ 010-D
Shaft Seal
WG 014
Wave Spring
HC 012-TO
H.P. Seal
AP2
Nozzles
WG 003
Body
WGP 040
Head
WGP-1 Nozzle Selection Guide
Pump Pressure
Front Jet 15˚Rear Jets (2) 155˚Rear Jets (2) 155˚
2000 psi / 140 bar
600 ft Hose
1” ID
2,500 psi / 172 bar
600 ft Hose
1” ID
Pump OutputHead Offset
60 gpm
227 l/min
R8
Plugged
AP2 115
AP2 106
60 gpm
227 l/min
R8
AP2 052
AP2 115
AP2 106
65 gpm
246 l/min
R8
Plugged
AP2 125
AP2 115
65 gpm
246 l/min
R8
AP2 057
AP2 115
AP2 115
80 gpm
303 l/min
R8
Plugged
AP2 145
AP2 135
80 gpm
303 l/min
R8
AP2 063
AP2 135
AP2 135
60 gpm
227 l/min
R8
Plugged
AP2 106
AP2 098
60 gpm
227 l/min
R8
AP2 052
AP2 098
AP2106
65 gpm
246 l/min
R8
Plugged
AP2 115
AP2 106
65 gpm
246 l/min
R8
AP2 057
AP2 106
AP2 106
80 gpm
303 l/min
R8
Plugged
AP2 125
AP2 125
80 gpm
303 l/min
R8
AP2 063
AP2 125
AP2 125
21
large lines
WGP 032
Retaining Ring
8”-36” Lines
WD 1-1/4 with two extra nozzle ports and high flow capacity.
WD 1-1/4
WD 1-1/4
High Flow Model For 8”-36” Lines
8”-36” Lines (152-457 mm)
80-120 gpm Flows (300-450 l/min)
High Flow Model
The WD 1-1/4 is designed to handle the same applications as the WG-1
Classic but at higher flows. The 1-1/4” inlet combined with 7 ports effectively
distribute more water. Descaling heads are not available for this model.
Super Centralizers
Available for this tool. See page 25 for details.
WD 1-1/4 Specs
MODEL
WD 1-1/4
Maximum Pressure
5k psi
Operating Pressure
1500-5k psi
Rotation Speed
Flow
Inlet Connection
Combination Truck
Courtesy of Aquatech
22
100-350 bar
150-300 rpm
80-120 gpm
Flow Rating
Pulling Force
350 bar
300-450 l/min
7.6 Cv
130-190 lb
600-850 Nm
1-1/4 NPT or BSPP
Length
9.1 in.
231 mm
4.8 in.
122 mm
Nozzle Ports
Weight Complete
7 x 1/8 NPT
11 lb
5.0 kg
8”-36” Lines
WD 1-1/4
WD 001
Shaft
WG 007
Bearing
WG 007
Bearing
BJ 211
Brass Seat
WD 021
Weep Seal
WG 008
O-Ring
WD 002
Inlet Nut
BJ 010-D
Shaft Seal
WG 003
Body
WD 040
Head
BJ 212-O
H.P. Seal
WG 080
Centralizer
WG 014
Wave Spring
BJ 010-D
Shaft Seal
Pump Pressure
2000 psi / 140 bar
600 ft Hose
w/ 1-1/4” ID
Pump Output
15˚ Head Offset
145˚
Front Jet
145˚
Rear Jets (3)
large lines
WD 1-1/4 High Flow Nozzle Guide
145˚
Rear Jets (3)
90 gpm
340 l/min
R35
AP2 063
AP2 115
AP2 106
100 gpm
380 l/min
R35
AP2 069
AP2 115
AP2 115
105 gpm
400 l/min
R35
AP2 069
AP2 115
AP2 125
110 gpm
415 l/min
R35
AP2 069
AP2 125
AP2 125
115 gpm
435 l/min
R35
AP2 075
AP2 125
AP2 135
120 gpm
455 l/min
R35
AP2 075
AP2 135
AP2 135
WD 1-1/4 Service & Overhaul Kits
WD 600 - Service Kit WD 610 - Overhaul Kit
1 BJ 048-F
1 BJ 048-F Viscous Fluid Fast, 6oz.
2 BJ 010-D Shaft Seals
1 GP 025-P2 Hex Socket Plug
1 BJ 211
Brass Seat
1 BJ 211
Brass Seat
1 BJ 212-O H.P. Seal & O-Ring
2 WG 007
Ball Bearings 1 WD 021
Seal
1 WG 008
O-Ring
1 WG 014
Wave Spring
WD 602 - Seal Kit
1 BJ 211
Brass Seat
WG 612 - Tool Kit
1 HC 064
Fill Tube
1 BJ 105
Tool
23
hydro excavation
The included high visibility urethane guards are replaceable with three bolts.
Hydro-Excavation provides a safe means to precisely
excavate an area with high pressure water.
Hydro-x
Hydro Excavation Tools
hydro-x
hydro excavation
StoneAge is proud to offer a new line of Hydro-Excavation jetting tools. Hydro-Excavation is a
safe alternative for providing access to buried utilities by potholing or trenching with high pressure
water. There are three options available for different applications.
NOTE: Each of these assemblies are jetted to match your pumps pressure and flow. The Waterjet
Technology Association recommends limiting the thrust on hand held jetting applications to no
more than 1/3 of the operators weight. Contact our Customer Service Team for any jetting questions.
HX-101 - Single Head Assembly
This option provides a replaceable single OCIH ¼ npt carbide nozzle at 0°. Using
a single nozzle allows all of your pumps power to be directed in one direction for
the most digging power. The high visibility urethane guard is replaceable with three
bolts. The head has a ½” npt inlet connection to attach to the operating wand.
HX-103S - Triple Straight Head Assembly
This option utilizes three AP2 Attack Tips which are 1/8 npt. This in-line pattern
give operators the ability to jet with a wider spray pattern to trench material
faster. The high visibility urethane guard is replaceable with three bolts. The head
has a ½” npt inlet connection to attach to the operating wand.
HX-200 - Hydro-X Lance Assembly
Similar to the HX-101, this option uses a replaceable single OCIH ¼ npt carbide
nozzle at 0°. However, this option includes a 60” lance which gives extra reach
for digging deep, focused holes. This assembly includes a guard and collar
system to protect the nozzle. The connecting point for this Lance is ½ npt male.
24
Up to 5k psi
Up to 12 gpm Flows
3 Options Available
Accessories
Manhole Cleaners
Turn your Warthog pipe cleaning tool into an effective Manhole Cleaner!
The benefit of using this design is that the jets are
directed at the manhole walls at all times which
makes it much more effective and safer than 3D
style of tools. The conversion is simple and requires
exchanging the standard WG 040 head with our
Manhole Cleaner head kits. The head
conversion kits include a head with 1/2” extension
arms and nozzles. Call our Customer Service team
for kit options. We recommend the use of manhole
cover plates for increased safety.
Saf-t-Guide manhole sewer hose roller guide with removable
Lexan protection plates by Southland Tool Mfg. Inc.
Centralizers for the WG-1 Classic
WG 286-M-P16 - straight pipes
13”-36” diameters (330-915 mm)
WG 288-S-P16 - pipes w/bends
16.5”-22” diameters (420-560 mm)
Poly-Fin
WG-070
Super Centralizers
WG-085
Available in 6”, 8”, 10” & 12”
interchangeable skid sizes.
(152 mm, 203 mm, 254 mm & 305 mm)
6.85” diameter
For 7” (178 mm) minimum pipe ID
accessories
6 and 8-Wheel Adjustable
We offer several different styles of centralizers including multi-wheeled models as shown above left, poly-fin models in the center, and
our super centralizers, shown right, that connect directly on to the body of the tool.
Ask our customer service specialists about adding extension arms for maximum effectiveness.
25
Accessories
Descaling Heads Maximize Cleaning Power
StoneAge offers optional heads that allow you to change our
standard nozzle configuation. Your existing WARTHOG can easily
be converted into a powerful descaling tool by simply changing the head.
WS 040-DS
For the WS-1/2
The descaling pattern features two additional jets at 105˚ combined with
a plugged front port to ensure maximum power. The result is enhanced
removal of scale, tuberculation, corrosion products, soap and minerals.
WH 040-DS
For the WH-1/2 & WH-3/4
WG 040-DS
For the WG-1
WS-1/2 Descaler Jetting Chart
Pump Pressure
Pump Output
8 gpm
2000 psi / 140 bar
500 ft Hose
w/ 1/2” ID
Head Offset
30 l/min
AP2 035
40 l/min
R5
Plugged
AP2 052
AP2 035
R3
Plugged
AP2 057
AP2 042
14 gpm
50 l/min
R3
Plugged
AP2 063
AP2 047
R3
Plugged
AP2 063
AP2 052
8 gpm
30 l/min
R5
Plugged
AP2 042
AP2 029
10 gpm
40 l/min
R5
Plugged
AP2 047
AP2 035
12 gpm
45 l/min
R3
Plugged
AP2 052
AP2 038
14 gpm
50 l/min
R3
Plugged
AP2 057
AP2 042
8 gpm
60 l/min
R3
Plugged
AP2 063
AP2 047
70-75 l/min
R3
Plugged
AP2 063
AP2 052
30 l/min
R5
Plugged
AP2 038
AP2 029
10 gpm 40 l/min
R3
Plugged
AP2 042
AP2 032
12 gpm 45 l/min
R3
Plugged
AP2 047
AP2 035
14 gpm 50 l/min
R3
Plugged
AP2 052
AP2 038
16 gpm 60 l/min
R3
Plugged
AP2 057
AP2 042
18 gpm 70 l/min
R3
Plugged
AP2 063
AP2 042
20 gpm 75 l/min
R3
Plugged
AP2 063
AP2 052
8 gpm
26
AP2 042
45 l/min
16 gpm
4000 psi / 280 bar
500 ft Hose
w/ 1/2” ID
Descaling Jets (2) 100˚
10 gpm
18-20 gpm
3,500 psi / 240 bar
500 ft Hose
w/ 1/2” ID
Plugged
Rear Jets (2) 155˚
12 gpm
16-20 gpm 60-75 l/min
2,500 psi / 170 bar
500 ft Hose
w/ 1/2” ID
R5
Front Jet
30 l/min
R5
Plugged
AP2 035
AP2 029
10 gpm 40 l/min
R3
Plugged
AP2 042
AP2 029
12 gpm 45 l/min
R3
Plugged
AP2 047
AP2 032
14 gpm 50 l/min
R3
Plugged
AP2 047
AP2 042
16 gpm 60 l/min
R3
Plugged
AP2 052
AP2 042
18 gpm 70 l/min
R3
Plugged
AP2 057
AP2 047
20 gpm 75 l/min
R3
Plugged
AP2 063
AP2 047
Accessories
WH-1/2 Descaler Jetting Chart
Pump Pressure
Pump Output
2000 psi / 140 bar
500 ft Hose
w/ 1/2” ID
14 gpm
16 gpm
3000 psi / 210 bar
500 ft Hose
w/ 1/2” ID
14 gpm
16 gpm
4000 psi / 280 bar
500 ft Hose
w/ 1/2” ID
Head Offset
Front Jet
R8
Plugged
AP2 063
60 l/min
R8
Plugged
AP2 063
AP2 052
50 l/min
R8
Plugged
AP2 057
AP2 042
50 l/min
Rear Jets (2) 150˚
AP2 047
60 l/min
R8
Plugged
AP2 057
AP2 047
12 gpm 45 l/min
R8
Plugged
AP2 047
AP2 032
14 gpm 50 l/min
R8
Plugged
AP2 047
AP2 042
16 gpm 60 l/min
R8
Plugged
AP2 052
AP2 042
20 gpm 75 l/min
R8
Plugged
AP2 063
AP2 047
25 gpm 95 l/min
R8
Plugged
AP2 063
AP2 052
WH-3/4 Descaler Jetting Chart
Pump Pressure
2000 psi / 140 bar
500 ft Hose
w/ 3/4” ID
3000 psi / 210 bar
500 ft Hose
w/ 3/4” ID
4000 psi / 280 bar
500 ft Hose
w/ 3/4” ID
Pump Output
Rear Jets (2) 150˚
95 l/min
R45
Plugged
AP2 075
AP2 063
30 gpm 115 l/min
R45
Plugged
AP2 090
AP2 063
40 gpm 150 l/min
R3
Plugged
AP2 106
AP2 082
20 gpm
75 l/min
R45
Plugged
AP2 063
AP2 047
25 gpm
25 gpm
Head Offset
Front Jet
95 l/min
R45
Plugged
AP2 069
AP2 052
30 gpm 115 l/min
R3
Plugged
AP2 075
AP2 063
35 gpm 130 l/min
R3
Plugged
AP2 082
AP2 069
40 gpm 150 l/min
R3
Plugged
AP2 090
AP2 075
45 gpm 170 l/min
R3
Plugged
AP2 098
AP2 082
20 gpm 75 l/min
R45
Plugged
AP2 057
AP2 042
25 gpm 95 l/min
R3
Plugged
AP2 063
AP2 052
30 gpm 115 l/min
R3
Plugged
AP2 069
AP2 057
35 gpm 130 l/min
R3
Plugged
AP2 075
AP2 063
40 gpm 150 l/min
R3
Plugged
AP2 082
AP2 069
WG-1 Descaler Jetting Chart
1500 psi / 100 bar
500 ft Hose
w/ 1” ID
2000 psi / 140 bar
500 ft Hose
w/ 1” ID
2500 psi / 170 bar
500 ft Hose
w/ 1” ID
3000 psi / 210 bar
500 ft Hose
w/ 1” ID
Pump Output
Head Offset
Front Jet
Rear Jets
(2) at 142˚
Rear Jets
(2) at 142˚
Descaling Jets
(2) at 100˚
60 gpm 225 l/min
R5
Plugged
Plugged
AP2 135
AP2 106
65 gpm 245 l/min
R5
Plugged
Plugged
AP2 145
AP2 115
80 gpm 300 l/min
R5
Plugged
Plugged
AP2 135
AP2 125
50 gpm 190 l/min
R5
Plugged
Plugged
AP2 106
AP2 090
55 gpm 210 l/min
R5
Plugged
Plugged
AP2 115
AP2 090
60 gpm 225 l/min
R5
Plugged
Plugged
AP2 125
AP2 090
65 gpm 245 l/min
R5
Plugged
Plugged
AP2 135
AP2 098
50 gpm 190 l/min
R5
Plugged
Plugged
AP2 106
AP2 075
55 gpm 210 l/min
R5
Plugged
Plugged
AP2 106
AP2 090
60 gpm 225 l/min
R5
Plugged
Plugged
AP2 115
AP2 090
65 gpm 245 l/min
R5
Plugged
Plugged
AP2 125
AP2 090
50 gpm 190 l/min
R5
Plugged
Plugged
AP2 098
AP2 075
55 gpm 210 l/min
R5
Plugged
Plugged
AP2 106
AP2 075
60 gpm 225 l/min
R5
Plugged
Plugged
AP2 106
AP2 090
accessories
Pump Pressure
27
Terms and Conditions
TERMS AND CONDITIONS
1. Acceptance of Terms and Conditions. These Terms and Conditions shall
operate as Seller’s acceptance of Buyer’s purchase order, and such acceptance
is made expressly conditional on assent by Buyer to the Terms and Conditions.
Such assent shall be deemed to have been given unless written notice of
objection to any of such Terms and Conditions (including inconsistencies
between Buyer’s purchase order and this acceptance) is given by Buyer to Seller
promptly on receipt hereof.
a.The warranty shall not apply if the product or service (1) has been subject
to misuse, negligence or accident; (2) has not been installed or operated in
accordance with Seller’s recommendations; (3) has been operated under
more severe conditions than those specified for the particular product or
service; (4) has been operated beyond the rated capacity of the product; or
(5) has been repaired or altered outside Seller’s facilities or in any way so
as, in Seller’s judgment, to affect its stability or reliability.
Seller desires to provide its Buyer with prompt and efficient service. However,
to negotiate individually the terms of each sales contract would substantially
impair Seller’s ability to provide such service. Accordingly, products furnished
and services rendered by Seller are sold only on the Terms and Conditions stated
herein. Notwithstanding any Terms or Conditions on Buyer’s order, Seller’s
performance of any contract is expressly made conditional on Buyer’s agreement
to Seller’s Terms and Conditions of sale unless otherwise specifically agreed
to in writing by Seller. In the absence of such agreement, commencement of
performance, shipment and/or delivery shall be for Buyer’s convenience only and
shall not be deemed or construed to be an acceptance of Buyer’s Terms and
Conditions.
b.Products that Seller furnishes, but does not manufacture, carry only
the warranty of the manufacturer of such products. Where other
manufacturers’ or suppliers’ products used in Seller’s products or services
prove defective, Seller’s liability shall exist only to the extent that Seller is
able to recover from such manufacturers or suppliers for such defects.
PRODUCTS SOLD BY SELLER ARE DESIGNED AND INTENDED TO BE
USED AT HIGH PRESSURES AND SPEEDS, AND MAY BE DANGEROUS
IF OPERATED IMPROPERLY OR WITHOUT THE USE OF APPROPRIATE
SAFETY DEVICES AND GUARDS. BUYER IS CAUTIONED TO CAREFULLY
READ AND UNDERSTAND THESE TERMS AND CONDITIONS, AS THEY
HAVE IMPORTANT LEGAL CONSEQUENCES.
2. Payment/Prices. Unless other arrangements have been made in writing
between Seller and Buyer, payment for product delivered shall be made upon
receipt of invoice. The prices shown on the face hereof are those currently in
effect. Prices invoiced shall be per price list in effect at the time of shipment.
Prices are subject to increase for inclusion of any and all taxes which are
applicable and which arise from the sale, delivery or use of Seller’s products or
services and for the collection of which Seller is or may be responsible to any
governmental authority unless acceptable exemption certificates are provided
by Buyer in accordance with law. Buyer shall pay all charges for transportation
and delivery and all excise, order, occupation, use or similar taxes, duties, levies,
charges or surcharges applicable to the equipment or services being purchased,
whether now in effect or hereafter imposed by any governmental authority,
foreign or domestic.
3. Warranty. Subject to the limitations and conditions hereinafter set forth,
Seller warrants to the original Buyer that its products are free from defects
in workmanship and material for a period of six (6) months from shipment.
Seller’s obligation under this warranty shall be limited to repairing, replacing
or issuing a credit for, at Seller’s option, any products or services it finds to be
defective in material or workmanship. In no event shall Seller be liable for any
incidental, consequential or indirect damages of any kind. THIS WARRANTY
SHALL BE IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY FOR MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE. No statement or recommendation made by Seller or its
representative to Buyer or User shall constitute a warranty by Seller or a waiver
or modification to any of the provisions hereof or create any liability for Seller. All
warranty claims are subject to the exclusions and limitations set forth below:
28
c.Any warranty granted by Seller to the Buyer shall be deemed void if
any goods covered by such warranty are used for any purpose not
recommended or permitted. In addition, the Buyer shall indemnify Seller
and hold Seller harmless from and against any and all claims, damages,
losses, costs, expenses and other liability of whatever nature that Seller
suffers or incurs by reason of any such unintended use.
d.Notice of defective product or service must be given in writing to Seller by
Buyer or User within fifteen (15) business days following receipt of goods.
Buyer or User shall keep such products or services in an unaltered condition
for examination by Seller’s representative. No goods may be returned for
credit or adjustment without prior written permission from Seller.
4. Product Liability. Buyer specifically acknowledges that the products being
purchased may be operated at high speeds and/or pressures, and that as such
they may be inherently dangerous if not used correctly. Buyer shall be solely
responsible for the safe operation of the products at all times and for determining
the safety devices and guards that may be required for the safe operation of
the products. Buyer shall undertake to specify and order all safety devices
and guards necessary for the safe operation of the equipment covered. All
safety devices and guards offered in Seller’s quotations are recommended for
purchase. Seller may provide necessary safety devices and guards not offered
in this quotation at an extra price in accordance with the specifications of Buyer.
Buyer shall at all times use and require its employees to use all necessary and
appropriate safety devices, guards and proper safe operating procedures. Buyer
shall not remove or modify any such devices, guards or warning signs and shall
insist on safe operating practices on the part of its personnel. In no event shall
Seller be responsible for any injuries to persons or property caused by defects
in any equipment, including by way of illustration and not limitation, any pumps,
compressors, fittings, connections, components, piping or hoses up to the point
that same are connected to the product. Buyer agrees to indemnify and to save
Seller harmless from any and all liability or obligation incurred by or against
Seller, including costs and attorneys’ fees, to or by any persons injured directly
or indirectly in the operation of the equipment furnished under the following
conditions:
a. if Buyer fails to purchase and use necessary and appropriate safety devices
and guards as determined and/or recommended by Seller;
b. if Buyer fails to maintain in good working order such safety devices and
guards as are purchased from Seller;
Terms and Conditions
c. if Buyer adds, omits, repairs, modifies, replaces or substitutes any
components on the equipment without permission from Seller;
d. if Buyer exceeds at any time the maximum safe loads, pressures or speeds
recommended by Seller for the equipment furnished hereunder without the
specific written consent of Seller; or
e. if Buyer otherwise fails to operate the product or equipment in accordance
with Seller’s printed instructions or otherwise negligently operates the
equipment.
5. Delivery. Seller is not obligated to make delivery by a specified date, but will
always use its best efforts to make delivery within the time requested. All
deliveries are based on F.O.B. Seller’s factory, unless specifically agreed
otherwise, and Buyer shall pay all shipping costs and insurance from that point.
Seller, in its sole discretion, will determine and arrange the means and manner
of transportation of the products. Responsibility of Seller shall cease and Buyer
assumes all risk of loss or damages upon Seller’s delivery to and receipt by a
common carrier. Carriers shall be responsible for goods lost or damaged in transit
and Buyer shall immediately notify the carrier in writing of such loss or damage.
At Buyer’s request Seller will offer its assistance.
THE PROPOSED SHIPMENT DATE IS AN ESTIMATE. UNDER NO
CIRCUMSTANCES SHALL SELLER HAVE ANY LIABILITY WHATSOEVER
FOR LOSS OF USE OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES
RESULTING FROM DELAY REGARDLESS OF THE REASON(S).
Shortages or errors must be reported within fifteen (15) business days from receipt
of shipment to secure adjustment. No merchandise may be returned without
securing written approval from Seller. Seller will notify Buyer promptly of any
material delay and will specify the revised delivery date as soon as practicable.
Seller shall not be liable for any delay in delivery or performance, or for any failure to
manufacture, deliver or perform due to (a) any cause beyond its reasonable control;
(b) any act of God, act of Buyer, act of civil or military authority, governmental priority,
strike or other labor disturbance, flood, epidemic, war, riot, delay in transportation or
car shortage; or (c) inability on account of any cause beyond the reasonable control
of Seller to obtain necessary materials, components, services or facilities. In the
event of any such delay, the date of delivery or of performance shall be extended for
a period equal to the time lost by reason of the delay.
6.Technical Advice. All technical advice, recommendations and services of Seller
are intended for use by persons having adequate skill, at their own risk, and
Seller assumes no responsibility, and Buyer hereby waives all claims against
Seller, for results obtained or damages incurred from the use of Seller’s advice,
recommendations and services.
of these Terms and Conditions are held to be invalid or unenforceable, such
invalidity or unenforceability shall not affect the validity or enforceability of the
other portions hereof.
8. Disputes. Buyer and Seller shall attempt in good faith promptly to resolve
any dispute arising under these Terms and Conditions by negotiations between
representatives who have authority to settle the controversy. If unsuccessful,
Buyer and Seller shall further attempt in good faith to settle the dispute by
nonbinding third-party mediation, with fees and expenses of such mediation
apportioned equally to each side. Any dispute not so resolved by negotiation
or mediation may then be submitted to a court of competent jurisdiction
in accordance with the terms hereof. These procedures are the exclusive
procedures for the resolution of all such disputes between the parties.
All sales, agreements for sale, offers to sell, proposals, acknowledgments and
contracts of sale, including, but not limited to, purchase orders accepted by Seller,
shall be considered a contract under the laws of the State of Colorado and the
rights and duties of all persons, and the construction and effect of all provisions
hereof shall be governed by and construed according to the laws of such state.
A state or federal court located within the State of Colorado shall have sole and
exclusive jurisdiction over any litigation concerning any such matters as well as
any alleged defects of any products or equipment covered thereby or damages
sustained as a result of such alleged defects.
If any litigation is commenced between Seller and Buyer, or their personal
representatives, concerning any provision hereof, the party prevailing in the litigation
shall be entitled, in addition to such other relief that is granted, to a reasonable sum
as and for their attorneys’ fees and costs in such litigation or arbitration.
StoneAge Trademark List
View the list of StoneAge’s trademarks and service marks and learn how the
trademarks should be used. Use of StoneAge trademarks may be prohibited,
unless expressly authorized.
http://www.stoneagetools.com/trademark-list/
StoneAge patent data
View the list of StoneAge’s current U.S. patent numbers and descriptions.
http://www.sapatents.com
7. Modification. These Terms and Conditions are intended by Seller and Buyer to
constitute a final, complete and exclusive expression of agreement and cannot be
supplemented or amended without Seller’s prior written approval. Seller’s waiver
of any breach, or failure to enforce any of the Terms and Conditions at any time,
shall not in any way affect, limit or waive Seller’s right thereafter to enforce and
compel strict compliance with every Term and Condition thereof. If any provisions
Copyright 2013 • StoneAge Inc. All Rights Reserved.
29
customer service
1-866-795-1586 (Toll Free in the U.S.)
970-259-2869 FAX: 970-259-2868 • sales@stoneagetools.com
Hours: 8:00 AM - 5:00 PM Monday - Friday (USA Mountain Time)
Technical
support
Manuals
Repairs
offers the products listed in this catalog through its dealer network only. For a list of our current dealers please visit
Our Technical Support team is available during the hours listed above. They are also available for custom
projects, see StoneAge Solutions below.
StoneAge
www.stoneagetools.com.
for all equipment are available online. They illustrate tools, identify parts, and detail maintenance and overhaul
procedures. Additional copies of the manuals, repair videos and CD’s are available at a nominal charge.
Operator’s Manuals
Repair & Maintenance Service is available by the same technicians who build and test our tools. We try to complete repairs and test
every tool within three days of receipt. Call first so we can record all the information necessary to begin work as soon as the tool arrives.
Make sure you include contact information. Send tool to:
StoneAge Inc. Attention Repairs, 466 S. Skylane Dr., Durango CO 81303, USA
Serial Number Database
is maintained on all equipment sold. If a serial number is provided when ordering parts, we can verify that
the right parts are specified.
30
Lead Time
Parts and Service Kits are available to ship same day as ordered. Standard tools can usually be shipped the next day. Custom porting
of heads usually requires 3-4 days to schedule through the factory. More complicated systems like Lancing Machines are built when ordered,
which can take several weeks depending on factory backlog. Check availability and place orders early enough to avoid scheduling conflicts.
Ordering
Call, E-Mail, or FAX your order to an authorized dealer with purchase order number, shipping and billing addresses, and delivery
date. Check datasheet to ensure specifications are complete. Advise whether we should hold shipment until all items are available.
Shipping
and invoiced with order but may be charged directly to the customer’s account with selected courier by special
instruction. Most orders are shipped via UPS or Fed Ex couriers; specify a preference if you wish. Lancing Systems, Floor Cleaners, Telebooms and
other large equipment must be shipped by truck or air freight. Either party may make the arrangements. Airline counter-to-counter delivery is not
reliable from our mountain location.
Payment
Major credit cards or bank transfers are accepted.
returns
Any parts returned for credit or warranty must be accompanied by a StoneAge RMA number. Please contact a Customer Service Specialist
to obtain an RMA number. A minimum restocking fee of 15% applies to standard items returned unused. Returns will only be accepted on
unused items returned 6 months or less from invoice date. All returns and restocking fees are subject to StoneAge final decision. Returns of
custom products and obsolete items are not accepted.
Shipping is pre-paid
Pre-payment is required to ship custom equipment.
the Stoneage team
Executives
John
KP
Administration
Jerry
Janet
Sara
Sales and shipping
Carrie
Valoree
Frank
Kent
Tim
Jack
Betsy
Travis
John
Joe
Colton
Rawlin
Todd
Doug
Jeff
fabrication, assembly and repair
Jacob
Brenda
engineering
Jeff DanielKevinAlan
Jed
Carolyn
Cody
marketing and solutions
Jim
Mike
Bill
Chris
Margaret
production, inventory and quality control
Keith
Mikey
Virgil
Tom
Stirling
Eric
Eric
Kevin
John
Kevin
Greg
Andy
Will
Chester
Eric
Julz
Bill
Chrissi
Hugh
Tom
Jim
Derek
Leighann
Teri
Charlie
Lynn
Lee
information systems
Bill
Greg
David
Ed
DeannaRon
31
Catalog Contents
u
Looking for a dealer?
All Warthogs are sold through StoneAge authorized dealers only.
Go to www.sewernozzles.com/dealers and choose your State or Country
to find a dealer near you.
United States
•Alabama
•Arizona
•Arkansas
•California
•Colorado
•Connecticut
•Delaware
•Florida
•Georgia
•Idaho
•Illinois
•Indiana
•Iowa
•Kansas
•Kentucky
•Louisiana
•Maryland
•Mass
•Michigan
•Minnesota
•Mississippi
•Missouri
•Nebraska
•New Jersey
•New York
•North Carolina
•Ohio
•Oklahoma
•Oregon
•Pennsylvania
•South Carolina
•Texas
•Utah
•Virginia
•Washington
•Wisconsin
Tools that Work.
Tools that last.
www.sewernozzles.com
32
International
•Africa
•Austrailia
•Canada
•China
•Denmark
•France
•Italy
•Netherlands
•New Zealand
•Sweden
•United Kingdom
Proudly Manufactured
in the United States
10KBP02012013

Warthog Catalogue

Transcription

Similar documents

Medicator Specifications

1" Impact Wrench - Racine Railroad

seisco quick guide - radiant floor heat

University of California at Irvine

Paper Machine Water System Audits

Proposal - Rehab LW-31 Evaluation High Chlorides

Global Precipitation Mission An opportunity for Ocean

AS AC series

Making Every Drop Count Brochure (DFC-5044)