MLC 104 IP Plus

MediaLink
MLC 104 IP Plus
MEDIALINK® CONTROLLER
WITH IP LINK®
Simplified remote control for A / V systems
➤ Bi-directional RS-232 port for
universal display control
➤ Integrated IP Link provides:
- Proactive maintenance
- Event scheduling
- Remote technical support
- Theft alerts
➤ Three digital I/O ports
➤ Dedicated IR Port
➤ Support for optional IRCM - Infrared
Control Modules
➤ IR learning capability
➤ RS-232 port for MediaLink Switcher
support
➤ Configurable backlit buttons
➤ Volume control with five
level-status LEDs
➤ Versatile mounting options
MLC 104 IP PLUS
Introduction
Extron MediaLink is a family of economical
and control of all connected A/V and room
IP Link® Remote Monitoring and Control
easy-to-install and easy-to-use products that
devices into one, easy-to-use system. There
Extron IP Link technology is a key feature
work together to connect, control, and switch
are no complicated remotes to lose or worry
of two MediaLink Controller models, the
A/V presentation equipment in small classrooms
about, no batteries to wear out, and no confusing
MLC 104 IP Plus and MLC 226 IP. Extron’s Free
and conference rooms. All MediaLink Controllers,
menus to memorize. In facilities where brands
GlobalViewer™ Web-based application, enables
MediaLink Switchers, and accessories are
and types of projectors, DVD players, and VCRs
you to remotely control and monitor MediaLink
designed to simplify installation and operation
may vary from room to room, controlling the A/V
Controllers, attached projectors, and other
of presentation systems. The complexity often
system with a MediaLink Controller is always the
connected A/V devices from any computer on
associated with A/V integration is replaced with
same no matter where it is installed, enabling a
your network. It can be used to simplify and
standardized and simple one-touch functionality
user to walk in and begin a presentation without
automate resource management and technical
that provides a complete system solution.
uncertainty or delay.
support tasks, such as turning displays on and
Centralized Room Control
MediaLink System Configuring
alerts. Altogether, IP Link and GlobalViewer
Extron’s MediaLink Controllers simplify system
Configuring the MediaLink System is simple and
provide a cost-effective means of centralizing
management and monitoring by centralizing
intuitive using Extron’s free software. There’s no
A/V system management and monitoring, thus
all of the control elements of a complete
need for intricate programming, special codes,
enabling a higher level of A/V system support
A/V system.
scripts, or proprietary languages. MediaLink
that reduces demands on personnel.
off, reporting lamp hours, and sending theft
configuration is as easy as navigating through
MediaLink Controllers are compatible with a
a graphical user interface and making the
variety of projectors and displays and eliminate
appropriate selections to suit the needs of the
the learning curve often associated with operating
application.
complicated control systems. These selfcontained controllers consolidate functionality
MLC 104 IP PLUS
Introduction
Versatile Mounting Options
Multiple Switching Options
MediaLink Accessories
MediaLink Controllers and MediaLink Switchers
Extron offers over a dozen MediaLink Switchers,
There are several MediaLink accessories
are housed in secure, tamper-resistant enclosures.
ranging in size from two to six inputs. Each
available to complete the MediaLink family.
They maintain the same control layout regardless
MediaLink Switcher allows for system expansion
Secondary
of where they are mounted: lecterns, desks, walls,
where more inputs are required than what a
MediaLink Controller’s front panel and offer a
A/V equipment racks, or wall boxes. Mounting kits
display can handle. Some MediaLink Switchers
second access point within a room to control
are available to accommodate various installation
also feature integrated mono or stereo audio
switching, volume, and the display. Other
requirements. These kits provide supplemental
amplifiers with microphone input, as well as an
accessories include IRCM AAPs for VCR and DVD
functionality
and
control
with
Control
Panels
duplicate
the
additional
output for assisted listening systems. MediaLink
control, IR remotes, faceplates, mud rings, and
buttons, knobs, and openings for Architectural
Switchers are specifically designed to be used
junction boxes.
Adapter Plates that enable the addition of
in conjunction with MediaLink Controllers to
signal pass-through connections or device
facilitate low-cost integration and expansion;
control modules.
they may also be used as stand-alone switchers.
TCP/IP
Network
GlobalViewer®
A/V Resource
Management and
Remote Control
Application
RS-232 or
IR Projector
control
1
R
VC
Y
LA
2
SP
DI
D
OFF
DV
ON
3
PC
ME
4
LU
VO
IG
NF
CO
4 IP
MLC
Extro
Plus
10
n
Extron MLC 104 IP Plus
Audio
MediaLink® Controller
Projector on/off control
S-Video
Video
LE
EB
TR
2
15
ER
MPA IFI
SS
BA
Extron
FF 120T
L
PL
VE
R AM
LE
REO
STE
WE
NI
MI
PO
Extron
MPA 152
Projector input switching
Projector volume control
RGBHV
Mini Power Amplifier
Audio
L
DUA O
MON
Plenum Flat Field
Ceiling Speakers
DVD/VCR
Combo
Enhanced Classroom Application with MediaLink Controller
Laptop
MLC 104 IP PLUS
MLC 104 IP Plus
The MLC 104 IP Plus MediaLink Controller with
built-in IP Link Ethernet Control is an easy-touse control panel for any small classroom or
meeting room. It is designed to control a wide
range of smaller A/V systems and enables Webbased remote diagnostics, asset management,
and support. The MLC 104 IP Plus standardizes
the control interface for all systems, making them
simple to use. Standardization also makes setup
and maintenance easier to support.
IP Link Ethernet Control
The flexible MLC 104 IP Plus acts as an extended
remote control panel. It is not a switcher;
instead, as a controller, it tells the display
when to switch between its various inputs.
Presenters with little or no training can walk into
any multimedia classroom equipped with the
MLC 104 IP Plus and operate the A/V system.
The MLC 104 IP Plus includes universal display
control for a display’s power, input switching, and
volume control. For one-button functionality, the
MLC 104 IP Plus features backlit buttons that
can be custom-labeled for easy identification.
Because the buttons illuminate, they are helpful for
presenters in low-light environments.
Universal Projector Control
The MLC 104 IP Plus is also capable of learning IR
commands for centralized control of external source
devices, such as DVD players and VCRs, when used
with an optional IRCM - Infrared Control Module.
Especially vital for high traffic areas, the
MLC 104 IP Plus is housed in a secure two-gang
enclosure. It has the same look and functionality
regardless of where it is mounted: a lectern,
desk, wall, rack, or wall box.
®
The MLC 104 IP Plus is equipped with Extron’s
IP Link®, an IP integration technology specifically
engineered to meet the needs of professional A/V
environments — from small K-12 classrooms to
large universities and businesses. The MLC 104 IP
Plus is fully supported by our Free GlobalViewer®
Web-based A/V resource management application
and GlobalViewer® Enterprise server-based A/V
resource management software.
Each MLC 104 IP Plus is equipped with a
dedicated port for communicating with virtually
any projector or display via IR or bidirectional
RS-232. Hundreds of device drivers are available
for download at no charge from our Web site at
www.extron.com.
Room Control
External devices such as lighting, screens,
projector lifts, or other products can be controlled
via three digital I/O ports and the dedicated IR
port on the MLC 104 IP Plus. Each digital I/O port
is configurable as a digital input or digital output
and can interface with a variety of devices, such
as sensors, switches, LEDs, and relays. The
dedicated IR port is ideal for control of display
devices and source equipment, such as VCRs
and DVD players.
the touch of a single button can trigger commands
to turn on a projector, select the projector’s
computer video input, and select a source input
on a MediaLink Switcher.
Configurable, Backlit Buttons
With the MLC 104 IP Plus, presenters with little
or no training can walk into any multimedia
classroom and operate the A/V system. The
backlit buttons on all MediaLink Controllers are
configurable to control input switching, power,
and volume. Because the buttons illuminate,
they are simple to see and operate in low-light
environments.
Control Modules
A wide selection of Extron Control Modules
is available for customized remote control of
external devices such as VCRs, DVD players, and
audio tape decks, as well as screens, lighting,
and basic audio adjustments. Integrating DVD
and VCR Control Modules into a MediaLink
system eliminates the clutter and confusion that
comes with multiple handheld remote controls.
Versatile Mounting Options
Several mounting options are available for
the MLC 104 IP Plus. Additional mounting kits
are available for local input expansion, or to
accommodate installations in lecterns, external
wall boxes, equipment racks, or desks.
Macro Capability
The backlit source selection and room control
buttons of the MediaLink Controllers can be
configured to execute multiple actions through
serial RS-232 and IR control ports. For instance,
Classroom
Computer Lab
Lecture Hall
Free GlobalViewer® works in conjunction with the MLC 104 IP Plus to support and control A/V systems in a
single building or across an entire campus.
MLC 104 IP PLUS
Overview
Faceplate options
Black, white, and RAL9010 White models are
standard options. Brushed aluminum finish
mounting kits are also available.
Display ON/OFF
Front Panel
Security Lockout
Discrete, backlit buttons
simplify system operations
and eliminate the need for an
external display remote
Four digit “PIN” prevents
unauthorized system use
Source Selection
Used to select the input on a projector
or switcher. Can also be configured
to perform other functions, such as
projector auto image
Volume control
Five level status LEDs
provide visual representation
of the display’s or switcher’s
volume setting
Backlit Buttons
Illuminated buttons are easy to
custom-label for identification
and are helpful for presenters
in low-light environments
Variety of Mounting
Options Available
Can be mounted virtually
anywhere, including a lectern,
A/V equipment rack, or on a wall
Inactivity Timer for Display Shut-Off
Adjustable timer controls automatic shutdown
to conserve energy, prevent plasma burn-in,
or extend projector lamp life
MLC 104 IP Plus
Front Panel
Configuration Port
Allows for configuration of
the MLC 104 IP Plus via the
front panel
IP Link®
Enables remote monitoring,
control, and asset management
Easy to Configure
Simple, one-time setup
with easy-to-use,
configuration software
Display Control
Allows for bidirectional
serial RS-232 display control
Optional IR
Control Modules
Switcher Control
Optional Control Modules enable
operation and customized control
of source devices such as VCRs
or DVD players
Provides control of an
optional MediaLink Switcher
via bidirectional serial RS-232
MLC 104 IP Plus
Back Panel
Dedicated IR Port
Digital I/O Ports
For controlling a source
device, such as a DVD
player or VCR
Control of room devices such
as lighting, screen settings,
and drapes
MLC 104 IP PLUS
MLC 104 IP Plus MediaLink Controllers
MLC 104 IP Plus
MediaLink Controller with IP Link
MLC 104 IP Plus DV+
MediaLink Controller with IP Link and Integrated DVD
and VCR IR Control
UNIQUE FEATURES
• Two-gang faceplate
• Dual-function DVD and VCR IR control
MLC - MediaLink Controller with IP Link and
Lectern Faceplate
MediaLink Controller with IP Link and AAP Opening
UNIQUE FEATURES
UNIQUE FEATURES
• Four-gang faceplate
MLC 104 IP Plus L
MLC 104 IP Plus AAP
• Four-gang faceplate
• Opening for up to four single space AAP - Architectural
Adapter Plates - AAPs sold separately
MLM 104 2GWP
Two-Gang Wall Mounting Kit for the MLC 104 IP Plus
UNIQUE FEATURES
UNIQUE FEATURES
• Replacement faceplates to match room décor
• Low profile, 3.2" (8.1 cm) tall faceplate fits into a
compact space on a lectern or desk
• Available in Black & White, or Brushed Aluminum
• Mounts in a rack or wall using an Extron UCM RAAP
Universal Controller Mounting Kit
SECONDARY CONTROL PANELS FOR THE MLC 104 IP PLUS
Optional Secondary Control Panels provide a second access point within a room to control switching, projector, and audio volume by duplicating the front panel
buttons of the MLC 104 IP Plus MediaLink Controllers. Secondary Control Panel models are available in black, white, or RAL9010 white.
SCP 104
Secondary Control Panels for MLC 104 IP Plus
SCP 104 AAP
Secondary Control Panel with AAP Opening for
MLC 104 IP Plus
UNIQUE FEATURES
• Two-gang faceplate
SCP 104 L
Secondary Control Panel with Lectern Faceplate for
MLC 104 IP Plus
UNIQUE FEATURES
UNIQUE FEATURES
• Four-gang faceplate
• Low profile, 3.2" (8.1 cm) tall faceplate fits into a
compact space on a lectern or desk
• Opening for up to four single space AAP - Architectural
Adapter Plates — AAPs sold separately
• Mounts in a rack or wall using an Extron UCM RAAP
Universal Controller Mounting Kit
MLC 104 IP PLUS
Graphical User Interface
Source Selection Buttons
Buttons can be custom-labeled with user defined text
Logo Graphics
Insert your full color school
or department logo here
Display Power On/Off
FPO
Control your display power, plus
up to two additional functions
Custom Color Scheme
Pick from a selection of
colors to coordinate with
school colors
Audio Control
Simple push button control
of audio volume and mute
functions
Online Help
Room Name
The classroom description
is automatically displayed
from GlobalViewer
configuration setup
Displays online reference
screens that show how to use
the presentation system and
controller functions
One of the free templates that can be downloaded from the Extron Web site
Graphical User Interface Option
be able to provide remote interactive support
GUI Customization Service: Extron Does The
Technology enhanced classrooms provide an
for all users from within the free GlobalViewer
Work For You
instructor with new tools to teach and interact
management environment.
®
within the presentation environment. Many
Ordering a custom GUI for your organization is as
easy as contacting an Extron Customer Support
instructors prefer the flexibility of not only
Extron offers two ways to create a custom GUI
Representative and describing what you need.
controlling the environment via an in-room
for your installation. You can create your own
For a small fee, Extron will take care of all the
controller mounted on a wall or lectern, but also
using our free templates or let Extron software
details.
from a control page on a computer monitor or
developers do the work for you with our
wireless device. Now, you can economically
economical GUI Customization Service.
deliver a graphically rich control environment in
Our software development team will create a
mockup of your customized GUI. When you are
each and every room, along with the powerful
Download Free Templates and Do It Yourself
completely satisfied with the design mockup,
management capability of a network-enabled
Our free user interface software development
Extron software programmers will develop
MediaLink Controller.
kit includes modifiable templates that can
your custom GUI according to your exact
be downloaded from the Extron Web site at
specifications. The files will be fully tested using
Extron’s graphical user interfaces, or GUIs,
www.extron.com/gui. The kit includes Adobe
the same model of MLC 104 IP Plus controller
are functional, intuitive, and easy to use.
Photoshop template files and code samples
used in your A/V system. When the testing is
The integrated IP Link Web server in the
that you can use to create and deploy your
done, an Extron Application Engineer will send
MLC 104 IP Plus controller makes adding a
own custom GUI. A detailed “getting started”
you your GUI files and work with you to install the
high-quality, customized user interface easy and
guide is also included with instructions on
GUI on your system.
enables control from any networked PC or laptop
modifying the template files and code, how basic
using either a mouse or touch-monitor in the
communication is handled by the system, and
room. Your AV/IT facility support team will still
loading and testing the base templates.
MLC 104 IP PLUS
Free Global Configurator Software
MEDIALINK PRODUCTS ARE SIMPLE AND EASY TO CONFIGURE…
NO PROGRAMMING KNOWLEDGE IS REQUIRED
®
Extron’s free Global Configurator puts all of the
most commonly used system monitoring and control
options at your fingertips. One of the costliest
aspects of building an A/V asset management
system, in terms of human resources and time,
is programming. A/V system programming can
be a complex task that requires the skills of an
experienced programmer.
Extron’s configuration approach offers tremendous
benefits over traditional system programming
methods, particularly for those who have mediumto-large installations to connect, monitor, and
maintain. Configuring the MLC 104 IP Plus is as
simple as selecting choices from intuitive, dropdown menus instead of writing, compiling, and debugging complicated computer source code. Should
system changes need to be made in the future,
such as a new VCR or DVD player, an experienced
programmer is not required.
Nearly Anyone Can Configure A System
System Changes Take Less Time
Non-programmers can use our free Global
Configurator software to build a complete A/V asset
management and monitoring system, freeing up
programmers for other projects.
Configuration means that initial system setup time
is reduced and there’s no need to delay making
changes because you are waiting for a hard-to-find
programming resource.
DISPLAY
DVD & VCR CONTROL
ON
OFF
VCR
1
DVD
2
PC
3
DVD
Tx
VCR
STATUS
POWER
N
R
E T E
ON
/O
FF
SELEC
C
A NC EL
T
E
M
SOURC
VOLUME
EN
U
AUTO
T
ADJUS
PWR ON: 02 00 01 00
TITLE
MENU
ENTER
TV/VCR
TUNER
PREV/REW PLAY NEXT/FWD PAUSE
CONFIG
Projector Manufacturers
Manual
Extron
DISPLAY
MUTE
STOP
4
MLC 104 IP PLUS DV+
Extron
MLC 104 IP Plus DV+
DISPLAY
ON
OFF
VOLUME
VCR
1
DVD
2
PC
3
VCR's Remote
CONFIG
PC
4
Projector
MLC 104 IP PLUS
Extron
MLC 104 IP Plus
Extron offers hundreds of drivers from many major
projector and display manufacturers
Extron-provided software allows
for customized projector control
IR Learning for VCR and DVD control
Free Projector Drivers
Custom Serial RS-232 Control
IR Learning
Extron creates and administers a wide selection of
commonly used projector control drivers. These IR
and serial RS-232 drivers allow MediaLink Controllers
to communicate with a display device. They enable
control of basic projector functions such as power,
input selection, and volume adjustment. Go to the
Extron Web site at www.extron.com to download
drivers for the latest and most popular projectors.
In environments where customizable projector
control is needed, integrators can easily enter in
their own RS-232 commands. RS-232 commands
can be assigned to any button using the provided
configuration software. The MediaLink Controllers
will work with virtually any projector.
Serial RS-232 is the preferred method of control;
however, many ultra portable projectors can only
support IR control. Various MediaLink Controller
models can learn IR commands from virtually any
IR controllable device. IR learning can also be used
in conjunction with optional IRCM Control Modules
that control source devices such as VCRs, DVD
players, and audio tape decks.
MLC 104 IP PLUS
Free GlobalViewer Software
®
Free GlobalViewer®, a Web-based asset management software application for the MLC 104 IP Plus MediaLink Controller, is a powerful, flexible way to manage,
monitor, and control these and other Extron IP Link products and the devices connected to them over a standard TCP/IP network. Together, GlobalViewer and
MediaLink Controllers with IP Link are ideal for use by schools and universities, corporate offices, government facilities, and even multi-building presentation
environments.
The MLC 104 IP Plus is equipped with Extron’s IP Link, an IP integration technology specifically engineered to meet the needs of A/V presentation environments.
Free GlobalViewer is designed to work with MediaLink and other Extron products that include IP Link technology. It facilitates key asset management functions
and is scalable from small to large scale systems. Free GlobalViewer requires no per-seat charges or license fees.
Control Screen
Monitor Screen
Schedule Screen
Remotely control basic functions such as
power, volume, and input selection
Remotely monitor power and
projector lamp hours
Conveniently schedule projector shutdown or e-mail alerts for lamp
replacement, filter cleaning, and other maintenance
Sort Options
Web-Based
View devices by
location or device type
Runs in a standard
Microsoft® Internet
Explorer Web browser
Location Tree View
Custom Button Text
Organize devices on eight
user-configurable levels,
e.g., Building/Floor/Room
Button label text can
be changed to suit
system requirements
KEY FEATURES
Available for free from www.extron.com
Extron Global Configurator can be downloaded from the Extron Web site free of charge. There are no per seat charges and no licensing fees.
No programming skills required
Menu-driven wizards guide users through the entire process of organizing system resources, building a network configuration, and uploading
configuration files to the system.
Integrated IP Link device management capabilities
Provides full management and control of IP Link devices within Global Configurator, including setting IP properties, passwords, mail server
settings, etc.
GlobalViewer host hierarchy for multiple levels of administration
Allows the creation of hierarchal tree views, in which each administrator can access only a subset of an organization’s IP Link devices, while the
global administrator can access all devices.
Device configuration copy and paste
Enables replication of an existing IP Link device configuration to one or more similar IP Link devices. Makes it easy to duplicate schedule and
monitor settings to multiple devices.
Printable wiring diagrams
Gives a user the ability to print a detailed wiring diagram of each configured IP Link device and its connected sources in Microsoft Word Format.
MLC 104 IP PLUS
Free GlobalViewer Software
Remote Technical Support
Proactive Maintenance
Event Scheduling
Technicians can troubleshoot systems remotely
because Free GlobalViewer provides real-time
status of connected devices. Information such as
connection status, power state, or current input
selection is displayed in a central location. For
many connected devices, technicians can toggle
power On/Off, switch sources, control volume
and more, without leaving their office. Many
common problems can be resolved without a trip
to where the equipment is located.
Free GlobalViewer can store information about
connected devices such as serial numbers,
owner identification, maintenance history,
usage data, and installed firmware versions.
This centralized data can be used to reduce
costs and guide future purchasing decisions.
For instance, a projector can be polled routinely
to track lamp usage and total life time. When
lamp usage reaches a predetermined number of
hours, the MLC 104 IP Plus can send an e-mail
notification.
Free GlobalViewer uses the real-time clock and
calendar in IP Link-enabled devices to maximum
value. User-defined tasks are easy to configure
and schedule with Free GlobalViewer and do
not require high-level programming skills. For
instance, an administrator may want to turn off
all projectors every Friday at close of business.
The administrator can schedule the system to
turn off all projectors at a specified time, and
raise all projection screens that were left down.
Key Benefits:
Key Benefits:
Key Benefits:
• Remote device control and access to device status
enables remote troubleshooting
• Maintenance and usage data can be used to guide
purchasing decisions
• Presentation rooms can be automatically prepared for use
prior to the scheduled start time of classes or meetings
• Users receive a quicker response and faster problem
resolution
• Service times can be proactively scheduled for optimum
use of resources
• Devices can be powered off automatically, reducing lamp
and power usage
• Centralized technical support enables better response
with fewer support staff
• Improved equipment maintenance results in increased
system uptime
• Devices can be configured to respond on schedule or to
predefined trigger events
Theft Alerts
Extron IP Link-enabled devices, such as
the MLC 104 IP Plus, are always on and
routinely poll their attached devices for status
information. If any serially controlled device
such as a projector or document camera is
physically disconnected from the network, the
MLC 104 IP Plus monitoring its status will know
immediately. In such an event, Free GlobalViewer
can be configured to send an e-mail message
notifying security personnel of the possible theft.
For immediate response, e-mails can be sent to
multiple addresses, including cell phones and
wireless PDAs.
Key Benefits:
• Monitoring is automatic; 24 hours a day, 7 days a week
• E-mail alerts can be sent to multiple e-mail addresses
simultaneously
• Reduction in losses from theft and vandalism saves
money
GLOBALVIEWER ENTERPRISE
®
GlobalViewer Enterprise server-based software is the next step up for managing larger A/V
installations. It provides an easy upgrade path for existing users of Free GlobalViewer using
configuration wizards, not programming. Compatible with most Web browsers, GlobalViewer
Enterprise provides enhanced help desk functionality as well as:
Enterprise-Wide Scheduling and Monitoring
With GlobalViewer Enterprise, it’s a snap to configure global schedules and conditional
monitors that are based on location and/or device type. Step-by-step menus simplify the
creation of a broad range of scheduled events and conditional monitors.
Data Logging and Reporting Capabilities
GlobalViewer Enterprise includes a SQL-based data repository for logging device and room
data. Data is gathered 24/7 and time-stamped for use in preparing valuable management
reports covering network connections, device usage, and A/V equipment inventory.
Multiple User Roles and Permissions
Controlling access for multiple users is made simple through the creation of customized
user roles.
Third-Party Scheduling System Integration
GlobalViewer Enterprise supports seamless integration with Microsoft Outlook® via Microsoft
Exchange® Server or several of the other popular campus scheduling applications, allowing
instant access to room availability and the power to schedule meetings, enhance room
usage reports, and even override scheduled display shut-offs automatically.
MLC 104 IP PLUS
Application Diagram
Screen
Control
GlobalViewer®
A/V Resource
Management and
Remote Control
Application
Extron
IPA T RLY4
Ethernet Control
Relay Box
1
IPA
TS C
PU 4
IN 3
2
Y4
T RL
Projector
IR to
DVD/VCR
Combo
Digital Out
& VC
DVD
Tx
OL
TR
ON
RC
RS-232
RGBHV
R
VC
R
NE
TU
D
DV
NU
ME
LE
1
TIT
2
EN
Video
OP
E
/VC
US
TV
R
TE
/FW
D
PA
XT
NE
AY
DVD
OFF
ON
ST
R
R
VC
AY
PL
DIS
PL
/REW
EV
PR
3
US
PC
ME
4 IP
MLC
4
LU
VO
IG
NF
CO
Y
LA
SP
DI UTE
M
DV+
PL
10
TCP/IP
Network
RS-232
Ex
n
tro
Extron
MLC 104 IP Plus DV+
MediaLink® Controller
Extron
MLS 304MA
MediaLink Switcher
O
ON
MR
M
TS XF
WAT
20
0V
UT
10
TP
V
70
D OU
M
CO
m
oh
IFIE
PL
AM
V
12
Tx
Rx
IR
C
4/8
CT
RE
DI
/IR
B
LC
/M
-232 MP
EA R
PR
A
RS
TS
INPU 2
DIO L
T
OUR
LINE
AU
1
IX
X/M
ST
JU
AD 2dB
-4
TO B
4d
+2
L
L
AU
DIO
TS
AU
INPU
DIO
5
VE
LE
O
LINEON
M
L
L
R
R
Mono
Amplified
Output
B
S
UT
TP G
TS
INPU
Hz
50
-60
Full-Range
Ceiling Speakers
T
OU
ITOR
OU
MON
R
V
Extron
SI 3CT LP
R
AU
6
O
VIDE
2
40
10
0-2
1
Audio
X.
A MA
1.0
AU
RGBHV
CO
Audio
Video
DI
O
MPU
NE
TW
TE
OR
R
K
WP
B
10
5
Extron
WPB 105
Wall Plate
DVD/VCR
Combo
RGBHV
& Audio
IR Emitter
RGBHV
From
MLC 104 IP Plus DV+
Controller
PC
Laptop
w/ Audio
MLC 104 IP PLUS
Specifications
CONTROL — HOST PORTS
Serial host port1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
Baud rate and protocol38400 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurationMini stereo jack: tip = TX, ring = RX, sleeve = GND
Ethernet host port1 RJ-45 female
Ethernet data rate10/100Base-T, half/full duplex with autodetect
Ethernet protocolARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
Ethernet default settingsLink speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
Web serverUp to 200 simultaneous sessions
7.25 MB nonvolatile user memory
Secondary control panel (SCP)(1) 3.5 mm 5-pole direct insertion captive screw connector
Program controlExtron Global Configurator for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet
IR learning frequencies30 kHz to 62 kHz
IR learning distance2" (5.1 cm) to 12" (30.5 cm) from the top panel
CONTROL — SERIAL PORTS
Display control port(1) 3.5 mm direct insertion captive screw connector, 3 pole,
for bidirectional RS-232 control (±5 V)
Switcher control port(1) 3.5 mm direct insertion captive screw connector, 3 pole,
for bidirectional RS-232 control (±5 V)
Baud rate and protocol (RS-232)115200 to 300 baud (9600 baud = default); 8 (default) or
7 data bits; 1 (default) or 2 stop bits; no parity (default), or
even or odd parity
CONTROL — IR PORT
IR control port(1) 3.5 mm direct insertion captive screw connector, 2 pole
TTL level (0 to 5 V) infrared control up to 1 MHz
DIGITAL I/O CONTROL
Number/type3 digital input/output (configurable)
Connector(1) 3.5 mm direct insertion captive screw connector, 4 pole
Pin configuration1, 2, 3 = digital inputs/outputs 1, 2, and 3; GND = GND
Digital inputs
Input voltage range0-12 VDC
Input impedance28k ohms
Programmable pullup2k ohms to +5 VDC
Threshold low to high>2.8 VDC
Threshold high to low<2.0 VDC
Digital outputs250 mA sink from 24 VDC, maximum
GENERAL
External power supply100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A,
regulated
Power input requirements
MLC 104 IP Plus DV+12 VDC, 0.305 A (includes MLC 104 IP Plus and IRCM-DV+)
All other models12 VDC, 0.285 A (0.305 A if used with an optional IRCM-DV+)
Temperature/humidityStorage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%,
noncondensing
Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%,
noncondensing
CoolingConvection, unvented
Mounting
Rack mount
All models except MLC 104 IP Plus DV+Yes, with optional rack mounting kits
Furniture or wall mountYes, all models
Enclosure type
MLC 104 IP Plus controller onlyNo faceplate, metal rear enclosure
MLC 104 IP Plus, MLC 104 IP Plus DV+High-impact plastic faceplate, metal rear enclosure
MLC 104 IP Plus in RAL9010, MLC 104
IP Plus AAP, MLC 104 IP Plus LMetal faceplate, metal rear enclosure
Enclosure dimensions
MLC 104 IP Plus faceplate4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x
0.3 cm D) (2 gang)
MLC 104 IP Plus AAP and
MLC 104 IP Plus DV+ faceplates4.5" H x 8.2" W x 0.1" D (11.4 cm H x 20.9 cm W x
0.3 cm D) (4 gang)
MLC 104 IP Plus L faceplate3.15" H x 6.5" W x 0.1" D (8.0 cm H x 16.5 cm W x 0.3 cm D)
MLC 104 IP Plus DV+ device2.7" H x 3.4" W x 1.8" D (6.9 cm H x 8.6 cm W x 4.6 cm D) and
2.7" H x 2.6" W x 0.9" D (6.9 cm H x 6.6 cm W x 2.3 cm D)
(Depth excludes knobs and buttons. Fits some 4 gang wall boxes. Allow at least 1.9" [4.8 cm] depth in the wall or furniture.)
All other models' device2.7" H x 3.4" W x 1.8" D (6.9 cm H x 8.6 cm W x 4.6 cm D)
(Depth excludes knob and buttons. Fits some 2 gang boxes. Allow at least 1.9" [4.8 cm] depth in the wall or furniture.)
Product weight
MLC 104 IP Plus DV+2.1 lbs (1.0 kg)
All other models1.9 lbs (0.9 kg)
Shipping weight6 lbs (3 kg)
VibrationISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
SafetyCE, c-UL, UL
EMI/EMCCE, C-tick, FCC Class A, ICES, VCCI
AccessibilityComplies with the appropriate requirements of Section 508 of
the Rehabilitation Act (29U.S.C.794d).
MTBF
30,000 hours
NOTE: All nominal levels are at ±10%.
Model
Version Description
MLC 104 IP Plus Black & White Faceplates
MLC 104 IP Plus DV+ Integrated DVD and VCR IR control,
Black & White Faceplates
MLC 104 IP Plus AAP AAP Opening, Black Faceplate
MLC 104 IP Plus AAP AAP Opening, White Faceplate
MLC 104 IP Plus L
Black Lectern Faceplate
MLC 104 IP Plus L White Lectern Faceplate
MLM 104 2GWP Brushed Aluminum
Included Accessories
MLC 104 IP Plus / MLC 104 IP Plus DVR / MLC 104 IP Plus AAP / MLC 104 IP Plus L
12V/1Amp power supply
Button labels text
Button labels icon
Optional Accessories
CM-9BLB
CFG Cable 9 DB IPA T RLY4 IRCM-DV+ IR Emitter and Shield Kit MLC IR/RS-232 MLS 100 A MLS 102 VGA MLS 304MA MPA 152 SCP 104 UC50’ (50’ / 15 m) UCM RAAP NETXC M-M
Part Number
60-818-03
60-818-82
60-818-12
60-818-13
60-818-32
60-818-33
70-822-04
70-055-01
33-954-01
33-955-01
Nine-Button Control Module - Quad Space AAP
Female-2.5 mm TRS Config. Cable
IP Link® Accessory with Four Relays Dual-Function DVD and VCR IR Control Module - Quad Space AAP
IR Emitter Kits
One Projector Communication Cable - Plenum
Four Input Stereo Audio MLS - MediaLink™ Switcher
Two Input VGA-QXGA and Four Input Stereo Audio
MLS -MediaLink™ Switcher
Four Input MLS - MediaLink™ Switcher w/ Mono Audio Amplifier
Stereo Power Amp - 15 Watts Per Channel
SCP - Secondary Control Panel for MLC 104 IP Plus Universal Projector Control Cable 50’ (15.2 m)
Universal Controller Mounting Rack Kit - Black
6' RJ-45 Crossover Cable
70-494-0X
70-335-01
60-545-03
70-220-0X
70-283-01
26-621-06
60-497-01
60-497-04
60-550-01
60-844-01
60-672-0X
26-518-01
70-344-02
26-591-01
Specifications are subject to change without notice.
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
www.extron.com
Extron USA - East
Extron Europe
Extron Middle East
Extron Asia
Extron Japan
Extron China
+800.633.9876
+800.3987.6673
+971.4.2991800
+971.4.2991880 FAX
+800.7339.8766
+81.3.3511.7655
+81.3.3511.7656 FAX
Inside China Only
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4040
+31.33.453.4050 FAX
Inside USA / Canada Only
Inside Europe Only
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
© 2010 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
+400.883.1568
+86.21.3760.1568
+86.21.3760.1566 FAX
09-2010
68-1440-01
REV. C