The Continuum of Critical Care
Transcription
The Continuum of Critical Care
The Continuum of Critical Care This catalog provides a comprehensive overview of our critical care portfolio. The portfolio consists of tools for monitoring patients of varying clinical complexity. Each product and system employs advanced technologies to provide optimum insight and maximum efficiency within the clinical workflow. Edwards also offers educational tools and resources to help advance the care and treatment of the critically ill. Please visit www.Edwards.com/Education to access these complimentary tools, including the Quick Guide to Cardiopulmonary Care. Table of Contents Advanced Minimally Invasive Hemodynamic Monitoring FloTrac Sensor .........................................................................................................................1 PreSep Oximetry Catheters ...................................................................................................2 PediaSat Oximetry Catheters .................................................................................................3 Vigileo Monitor ......................................................................................................................4 Advanced Hemodynamic Monitoring Swan-Ganz CCO, Oximetry and CEDV Catheters ..................................................................5 Swan-Ganz Oximetry Thermodilution Catheters..................................................................6 Swan-Ganz Pacing Catheters .................................................................................................7 Swan-Ganz Standard Thermodilution and VIP Catheters ....................................................9 Swan-Ganz No Latex Catheter and Introducer...................................................................10 Swan-Ganz Femoral Vein Insertion Catheters ....................................................................11 Swan-Ganz Pulmonary Angiography Catheters .................................................................12 Swan-Ganz Monitoring Catheters .......................................................................................13 CO-Set+ Closed Injectate Delivery System...........................................................................14 IntroFlex Percutaneous Sheath Introducers ........................................................................15 Vigilance II Monitor ..............................................................................................................17 Pressure Monitoring and Closed Blood Sampling Systems TruWave Disposable Pressure Transducers and Kits ...........................................................18 VAMP Blood Sampling Systems ...........................................................................................20 TruWave Transducer/VAMP System Combination Kits .......................................................23 Pressure Monitoring Accessories .........................................................................................25 Pediatric Hemodynamic Monitoring PediaSat Oximetry Catheters ...............................................................................................27 Pediatric Swan-Ganz Catheters............................................................................................28 Pediatric Pressure Monitoring and Closed Blood Sampling System ..................................28 Central Venous Access Vantex Central Venous Catheters ........................................................................................30 Multi-Med Central Venous Catheters..................................................................................32 Customer Service and Ordering Information ..........................................................................34 Advanced Minimally Invasive Hemodynamic Monitoring Advanced Minimally Invasive Hemodynamic Monitoring FloTrac Sensor FloTrac sensor is a less-invasive hemodynamic monitoring device that provides key flow parameters (CO, SV, SVV, SVR) from an existing arterial catheter using continuous automatic tone adjustments. The complete system includes the Vigileo monitor that calculates and displays the key flow parameters. The FloTrac sensor is accurate, easy to use and less invasive: • Connects to existing arterial catheter. • Requires no additional catheters, boluses or chemical indicators enabling rapid set up. • Continuously monitors changes in the patient’s vascular tone (compliance and resistance). • Validated against the clinical gold standard Swan-Ganz pulmonary artery catheter1. • Compatible with Vigileo monitor. Model Description MHD6 FloTrac sensor with 60” (152 cm) pressure line MHD6AZ FloTrac sensor with 60” (152 cm) pressure line and VAMP adult system MHD8 FloTrac sensor with 84” (213 cm) pressure line APCO9 FloTrac sensor connecting cable 9’ (274 cm) PHYSIOTRAC PhysioTrac laser leveler 1. A Manecke G, Auger W. “Cardiac Output Determination from the Arterial Pressure Wave: Clinical Testing of a Novel Algorithm That Does Not Require Calibration.” Journal of Cardiothoracic and Vascular Anesthesia 2007; Vol 21 (1): 3-7 For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 1 Advanced Minimally Invasive Hemodynamic Monitoring PreSep Oximetry Catheters PreSep oximetry catheters are triple lumen central venous catheters with the added capability for continuously monitoring central venous oxygen saturation (ScvO2). It is integral to Early Goal-Directed Therapy (EGDT) for the management of sepsis. EGDT when used with the PreSep catheter yields significant reductions in sepsis-related mortality1. • Continuous ScvO2 monitoring to assess the balance of oxygen delivery and consumption. • Available with antimicrobial protection using Oligon material.* • Easy to insert using same insertion technique as that of central lines. • Pressure monitoring and high flow rates. • Compatible with Edwards oximetry monitors and optical module. Proximal Lumen Sheath Distal Lumen Optical Module Connector Suture Ring Suture Wings Medial Lumen Model Description Integrated Antimicrobial Protection* Size (F) # Lumens Length (cm) X3820HKCDC PreSep oximetry catheter CDC kit** N 8.5 3 20 X3820KCDC PreSep oximetry catheter CDC kit N 8.5 3 20 X3816HKCDC PreSep oximetry catheter CDC kit** N 8.5 3 16 X3816KCDC PreSep oximetry catheter CDC kit N 8.5 3 16 XA3820HKCDC PreSep Oligon oximetry catheter CDC kit** Y 8.5 3 20 XA3820KCDC PreSep Oligon oximetry catheter CDC kit Y 8.5 3 20 XA3816HKCDC PreSep Oligon oximetry catheter CDC kit** Y 8.5 3 16 XA3816KCDC PreSep Oligon oximetry catheter CDC kit Y 8.5 3 16 XA3816HKSAF PreSep Oligon oximetry catheter safety kit** Y 8.5 3 16 XA3816KSAF PreSep Oligon oximetry catheter safety kit Y 8.5 3 16 XA3820HKSAF PreSep Oligon oximetry catheter safety kit** Y 8.5 3 20 XA3820KSAF PreSep Oligon oximetry catheter safety kit Y 8.5 3 20 1. Rivers EP et al. Early Goal-Directed Therapy in the Treatment of Severe Sepsis and Septic Shock. New England Journal of Medicine 2001; 345 (19):1368-77 * PreSep Oligon oximetry catheters contain an integrated Oligon antimicrobial material. The activity of the antimicrobial material is localized at the catheter surfaces and is not intended for treatment of systemic infections. In vitro testing demonstrated that the Oligon material provided broad-spectrum effectiveness (≥ 3 log reduction from initial concentration within 48 hours) against the organisms tested: Staphylococcus aureus, Staphylococcus epidermidis, Klebsiella pneumoniae, Enterococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, Acinetobacter calcoaceticus, Corynebacterium diphtheriae, Enterobacter aerogenes, GMRSa, Pseudomonas aeruginosa, Candida glabrata and VRE (Enterococcus faecium). ** All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. All model numbers with “CDC” contain ChloraPrep retractable safety scalpel, needle locking devices and double sterile barrier with CSR wrap. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 2 Advanced Minimally Invasive Hemodynamic Monitoring PediaSat Oximetry Catheters PediaSat oximetry catheters are pediatric central venous catheters with the added capability for continuously monitoring central venous oxygen saturation (ScvO2). • Continuously monitors ScvO2 to assess the balance of oxygen delivery and consumption. • Sized for pediatrics. • Easy to insert using same insertion technique as that of central lines. • Offers high flow rates and convenient administration of fluids. • Compatible with Edwards optical module and Edwards monitors including: Vigileo, Vigilance II and Explorer monitors and SAT-2 device. PediaSat Double Lumen Catheters Model Description Size (F) # Lumens Length (cm) XT245HK PediaSat oximetry catheter kit* 4.5 2 5 XT245K PediaSat oximetry catheter kit 4.5 2 5 XT248HK PediaSat oximetry catheter kit* 4.5 2 8 XT248K PediaSat oximetry catheter kit 4.5 2 8 Size (F) Unit of Measure Length (cm) 5.5 3 8 PediaSat Triple Lumen Catheters Model Description XT358HK PediaSat oximetry catheter kit* XT358K PediaSat oximetry catheter kit 5.5 3 8 XT3515HK PediaSat oximetry catheter kit* 5.5 3 15 XT3515K PediaSat oximetry catheter kit 5.5 3 15 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 3 Advanced Minimally Invasive Hemodynamic Monitoring Vigileo Monitor Vigileo monitor is a single monitor solution for fluid optimization and tissue oxygenation. It allows for the continuous monitoring of essential hemodynamic information, providing rapid insight on a minimally invasive, easy-to-use platform. The Vigileo monitor works with: • The FloTrac sensor to measure and display key flow parameters (CO, SV, SVV, SVR). • The PreSep catheter to provide central venous oxygen saturation (ScvO2). TM 74 CO ScvO2 ScvO2 12 100 6 50 0 0 ? Vigileo Vi gileo TM Model Description MHM1 Vigileo monitor (110 V) MHM1E Vigileo monitor (220 V) MHAPLMNT Vigileo monitor pole mount kit For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 4 Advanced Hemodynamic Monitoring Swan-Ganz CCO Catheters Swan-Ganz continuous cardiac output, SvO2 and CEDV catheters are to be used with the Vigilance II monitor to properly display the specified parameters. Swan-Ganz CCO catheters allow for continuous calculation of cardiac output. Thermistor @ 4 cm Thermistor Connector Thermal Filament Balloon Inflation Valve Balloon Thermal Filament Connector PA Distal Lumen VIP Port @ 30 cm Proximal Injectate Lumen Hub Optical Module Connector Proximal Injectate Port @ 26 cm VIP Lumen Hub Model Description Size (F) Unit of Measure Advanced Hemodynamic Monitoring PA Distal Lumen Hub Length (cm) 139F75 Continuous cardiac output (CCO) VIP catheter 7.5 CS (5) 110 139HF75P Continuous cardiac output (CCO) VIP catheter* 7.5 CS (5) 110 Swan-Ganz CCOmbo Catheters Swan-Ganz CCOmbo catheters are the abbreviated name for Swan-Ganz CCO/SvO2 thermodilution catheters, which are designed to continuously monitor both cardiac output and mixed venous oxygen saturation (SvO2). Model Description Size (F) Unit of Measure Length (cm) 744F75 Continuous cardiac output catheter with SvO2 7.5 EA 110 744HF75 Continuous cardiac output catheter with SvO2* 7.5 EA 110 746F8 Continuous cardiac output VIP catheter with SvO2 8 EA 110 746HF8 Continuous cardiac output VIP catheter with SvO2* 8 EA 110 Swan-Ganz Combo V Catheters Swan-Ganz CCOmbo V catheters are designed to enable continuous monitoring of hemodynamic pressures, continuous cardiac output, mixed venous oxygen saturation (SvO2), and continuous end diastolic volume (EDV). Model Description Size (F) Unit of Measure Length (cm) 774F75 Continuous cardiac output catheter with SvO2 and EDV 7.5 EA 110 774HF75 Continuous cardiac output catheter with SvO2 and EDV* 7.5 EA 110 777F8 Continuous cardiac output VIP catheter with SvO2 and EDV 8 EA 110 777HF8 Continuous cardiac output VIP catheter with SvO2 and EDV* 8 EA 110 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 5 Swan-Ganz Oximetry Thermodilution Catheters Swan-Ganz oximetry thermodilution catheters continuously monitor mixed venous oxygen saturation. • Swan-Ganz oximetry thermodilution catheters enable monitoring of hemodynamic pressures, cardiac output, and continuous mixed venous oxygen saturation. • Swan-Ganz VIP oximetry thermodilution catheters provide an additional (VIP) lumen that allows for continuous infusion. • Swan-Ganz Paceport oximetry thermodilution catheters are intended for use in patients who require hemodynamic monitoring when temporary transvenous pacing is anticipated. Thermistor Thermistor Connector Balloon Inflation Valve Optical Module Connector Balloon Advanced Hemodynamic Monitoring Distal Lumen RV Port @ 19 cm Distal Lumen Hub RV Paceport Lumen Hub (Pacing/Infusion) Model Proximal Injectate Port @ 30 cm Proximal Injectate Lumen Hub Description Size (F) Unit of Measure Length (cm) 110 741F75 Oximetry thermodilution catheter 7.5 EA 741HF75 Oximetry thermodilution catheter* 7.5 EA 110 782HF75 VIP oximetry thermodilution catheter* 7.5 EA 110 780HF75 Paceport oximetry thermodilution catheter* 7.5 EA 110 631HF55 Pediatric oximetry thermodilution catheter* 5.5 EA 75 040F4 Small French oximetry catheter 4 EA 40 040HF4 Small French oximetry catheter* 4 EA 40 015F4 Small French oximetry catheter 4 EA 25 015HF4 Small French oximetry catheter* 4 EA 25 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 6 Swan-Ganz Thermodilution Pacing Catheters Swan-Ganz thermodilution pacing catheters are indicated for atrial, ventricular, or A-V sequential pacing. • Thermodilution pacing catheters contain three atrial and two ventricular electrodes for atrial and ventricular pacing and atrioventricular (A-V) sequential pacing. Model Description D200F7 Pacing-TD catheter Size (F) Unit of Measure Length (cm) 7 EA 110 D200HF7 Pacing-TD catheter* 7 EA 110 D205HF7 Pacing-TD catheter, for smaller hearts* 7 EA 110 Swan-Ganz Paceport Catheters and Chandler Probes Advanced Hemodynamic Monitoring Swan-Ganz Paceport catheters are intended for use in patients who require hemodynamic monitoring when the need for temporary transvenous pacing is anticipated. Thermistor Connector Balloon Inflation Valve RV Paceport Lumen Hub (Pacing/Infusion) PA Distal Lumen Hub RV Port @ 19 cm Proximal Injectate Hub Proximal Injectate Port @ 30 cm Thermistor Balloon PA Distal Lumen Paceport Catheter Model Description Size (F) Unit of Measure Length (cm) 931F75 Paceport TD five lumen catheter 7.5 EA 110 931HF75 Paceport TD five lumen catheter* 7.5 EA 110 991HF8 A-V Paceport six lumen catheter* 8 EA 110 D98100H Chandler transluminal V-pacing probe* 2.4 EA 135 D98500H Flex-Tip transluminal A-pacing probe* 2.4 EA 135 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 7 Swan-Ganz Bipolar Pacing Catheters Swan-Ganz bipolar pacing catheters are designed for temporary right ventricular endocardial pacing. Distal Electrode Connector Balloon Proximal Electrode Connector Distal Electrode Proximal Electrode Gate Valve Model Description Size (F) Unit of Measure Length (cm) D97120F5 SVC insertion, catheter only 5 EA 90 Advanced Hemodynamic Monitoring D97130F5 Femoral insertion, catheter only, “J-Tip” 5 EA 90 D97K12F5 SVC insertion, kit, 5 EA 90 D97K13F5 Femoral insertion, kit, “J-Tip” 5 EA 90 D97140HF5 VIP kit* 5 EA 100 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 8 Swan-Ganz Thermodilution Catheters Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications. Model Description Size (F) Unit of Measure Length (cm) 132F5 Four lumen catheter 5 EA 75 096F6P Four lumen catheter 6 CS (5) 110 131F7 Standard four lumen catheter 7 CS (5) 110 131HF7 Standard four lumen catheter* 7 CS (5) 110 Swan-Ganz VIP & VIP+ Catheters Advanced Hemodynamic Monitoring The Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications. • The Swan-Ganz VIP catheters have an extra lumen in addition to the standard distal and injectate lumens to provide direct access to the right atrium. • The Swan-Ganz VIP+ catheters are equipped with two right atrium lumens. PA Distal Lumen Hub Balloon Inflation Valve (Gate Valve) RV Infusion Lumen Hub RA Infusion Port @ 31 cm RV Infusion Port @ 19 cm Thermistor Connector Proximal Injectate Lumen Hub RA Infusion Lumen Thermistor Proximal Injectate Port @ 30 cm Balloon PA Distal Lumen Model Description Size (F) Unit of Measure Length (cm) 831F75 VIP five lumen catheter 7.5 CS (5) 110 831HF75 VIP five lumen catheter* 7.5 CS (5) 110 834HF75 VIP+ six lumen catheter* 7.5 CS (5) 110 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 9 Swan-Ganz No Latex Catheter and Introducer • Catheter and introducer sheath are packaged together for maximum convenience. • ControlCath thermodilution catheters are made from a proprietary polymer blend and offer improved torque control and maneuverability over the standard Swan-Ganz thermodilution catheter. • The Swan-Ganz ControlCath synthetic thermodilution catheter “C-Tip” allows for both femoral or SVC approaches. • K9FC146F7 contains catheter model C146F7 and introducer model I505BF9. Thermistor Connector Injectate Lumen Hub Thermistor Balloon Inflation Valve Proximal Injectate Proxi Port @ @ 30 cm Port Advanced Hemodynamic Monitoring Distal Lumen Hub Balloon “C-Tip” Model Description K9FC146F7 No latex catheter and introducer Distal Lumen Port Size (F) Unit of Measure Length (cm) 7 EA 110 For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 10 Swan-Ganz Femoral Vein Insertion Catheters Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications. • Swan-Ganz Hi-Shore thermodilution catheters are slightly stiffer than the standard Swan-Ganz catheter, and may be used when more torque control and maneuverability is needed. • Swan-Ganz CardioCath thermodilution catheters are made of the same material as the Hi-Shore catheters, but are even stiffer due to the stiffening rod in one lumen. • Swan-Ganz ControlCath thermodilution catheters are made from a proprietary polymer blend and offer improved torque control and maneuverability. • The “S-Tip” configuration is designed specifically for femoral vein insertion. • The “C-Tip” configuration allows for both femoral or SVC approaches. Injectate Lumen Hub Advanced Hemodynamic Monitoring Thermistor Connector Balloon Balloon Inflation Valve Distal Lumen Port Proximal Injectate Port @ 30 cm Distal Lumen Hub Thermistor “S-Tip” Thermistor Proximal Injectate Port @ 30 cm Balloon “C-Tip” Model Distal Lumen Port Description Size (F) Unit of Measure Length (cm) 141HF7 Hi-Shore catheter* 7 CS (5) 110 141F7 Hi-Shore catheter 7 CS (5) 110 151F7 “S-Tip” catheter 7 EA 110 151HF7 “S-Tip” catheter* 7 EA 110 143HTF7 CardioCath, Hi-Shore catheter* 7 EA 110 143TF7 CardioCath, Hi-Shore catheter 7 EA 110 C144F7 ControlCath catheter, polymer blend, “C-Tip” 7 EA 110 C144HF7 ControlCath catheter, polymer blend, “C-Tip”* 7 EA 110 C145HF6 ControlCath catheter, polymer blend, “C-Tip”* 6 EA 110 S144F7 ControlCath catheter, polymer blend, “S-Tip” 7 EA 110 S144HF7 ControlCath catheter, polymer blend, “S-Tip”* 7 EA 110 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 11 Swan-Ganz Pulmonary Angiography Catheters Swan-Ganz pulmonary angiography catheters are indicated for the detection of emboli in the pulmonary vasculature. • The distal tip is closed-ended to optimize injection of contrast medium through the multi-hole side exit ports, which minimizes the occurrence of arrhythmias, intramyocardial staining, and catheter tip recoil. Balloon Inflation Valve Balloon Proximal Injection Ports Proximal Lumen Hub Advanced Hemodynamic Monitoring Model Description 191F7 Pulmonary angiography catheter Size (F) Unit of Measure Length (cm) 7 EA 110 191HF7 Pulmonary angiography catheter* 7 EA 110 191F8 Pulmonary angiography catheter 8 EA 110 191HF8 Pulmonary angiography catheter* 8 EA 110 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 12 Swan-Ganz Monitoring Catheters Swan-Ganz flow-directed monitoring catheters provide a rapid, simple, and effective method for monitoring right heart pressures. • In double lumen catheters, the lumen terminates at the distal tip of the catheter and is used to monitor pulmonary artery and wedge pressures. • Triple lumen monitoring catheters have the same capabilities as double lumen catheters with the additional (proximal) lumen for central venous pressure monitoring. Balloon Inflation Valve Balloon PA Distal Lumen Port Distal Lumen Hub Proximal Lumen Port Advanced Hemodynamic Monitoring Proximal Lumen Hub Triple Lumen Monitoring Catheter Model Description Size (F) Unit of Measure Length (cm) 110F5 123F6P Double lumen catheter 5 CS (5) 110 Double lumen catheter 6 CS (5) 110 T123F6 Double lumen catheter, “T-Tip” 6 CS (5) 110 111F7P Double lumen catheter 7 CS (5) 110 S111F7 Double lumen catheter, “S-Tip” bend 7 EA 110 T111F7 Double lumen Hi-Shore catheter, “T-Tip” 7 CS (5) 110 114F7P Triple lumen catheter, 30 cm exit proximal lumen 7 CS (5) 110 115F7P Triple lumen catheter, 20 cm exit proximal lumen 7 CS (5) 110 For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 13 CO-Set+ Closed Injectate Delivery System The CO-Set+ closed injectate delivery system works effectively with room temperature or cold injectate. • Provides simple and convenient delivery of injectate for the measurement of cardiac output by thermodilution. • Includes a 10 cc syringe with integrated contamination shield. Cooling Container Advanced Hemodynamic Monitoring 10 cc Syringe Model Description Unit of Measure 93600 Cold injectate system CS (10) 93610 Room temperature injectate system CS (10) 93611 Room temperature injectate system with 2 bonded stopcocks CS (8) CO-Set+ System Component Parts Model Description 93505 Flow-through injectate housing Unit of Measure CS (8) 93520 Cooling containers CS (6) 93521 Cooling container bracket for IV pole EA 93522 CO-Set+ system inline injectate temperature probe for Edwards monitors EA 93650 CO-Set+ system syringe, 10 cc CS (5) For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 14 IntroFlex Percutaneous Sheath Introducers IntroFlex introducers are the perfect companion for your Swan-Ganz catheters. • Sheath material resists kinking and sheath collapse, while easing insertion. • Improved taper for easier insertion. • Adjustable locking device helps secure catheter in place. • Available with or without AMC Thromboshield* coating, an antimicrobial† heparin coating. Tissue Sheath Introducer Valve Housing Catheter Touhy-Borst Proximal Adapter Strain Relief Distal Locking Adapter Contamination Shield Advanced Hemodynamic Monitoring Sideport 5 French Introducers Model Description I500F5C Kit with 5F sheath, detachable automatic Unit of Measure Useable Length (cm) CS (10) 10 CS (10) 10 Unit of Measure Useable Length (cm) CS (10) 10 CS (10) 10 Unit of Measure Useable Length (cm) CS (10) 10 CS (10) 10 valve and ChloraPrep preoperative skin preparation sites I550BF5 Kit with 5F sheath and bonded adjustable valve 6 French Introducers Model Description I500F6C Kit with 6F sheath, detachable automatic valve and ChloraPrep preoperative skin preparation sites I550BF6 Kit with 6F sheath and bonded adjustable valve 7 French Introducers Model I500F7C Description Kit with 7F sheath, detachable automatic valve and ChloraPrep preoperative skin preparation sites I550BF7 Kit with 7F sheath and bonded adjustable valve * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 15 8 French Introducers Model Description I550BF8 Kit with 8F sheath and bonded adjustable valve Unit of Measure Useable Length (cm) CS (10) 10 Unit of Measure Useable Length (cm) CS (10) 10 8.5 French Introducers Model I500F85C Description Kit with 8.5F sheath, detachable automatic valve and ChloraPrep preoperative skin preparation sites I500BF85 Kit with 8.5F sheath, bonded automatic valve CS (10) 10 I500BF85C Kit with 8.5F sheath, bonded automatic valve CS (10) 10 CS (10) 10 CS (10) 10 CS (10) 10 Unit of Measure Useable Length (cm) CS (10) 10 CS (10) 10 CS (10) 10 and ChloraPrep preoperative skin preparation sites Comprehensive Hemodynamic Monitoring SI500BF85I Safety kit with ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector I502BF85HC Kit with 8.5F heparin coated sheath, bonded automatic valve and ChloraPrep preoperative skin preparation sites* I551BF85H Kit with 8.5F heparin coated sheath and bonded adjustable valve* 9 French Introducers: High-Flow Sidearm Model Description I505BF9HC High-flow kit with 9F heparin coated sheath, bonded automatic valve and ChloraPrep preoperative skin preparation sites* I555BF9H High-flow kit with 9F heparin coated sheath, bonded adjustable valve* SI5AB9FKI Safety kit with ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 16 Vigilance II Monitor The Vigilance II monitor offers a complete picture of hemodynamic performance. • CO, SvO2, EDV, RVEF, SVR and SV parameters are continuously displayed on a single, easy-to-use unit. • Calculation and cross-correlation of hemodynamic and oxygenation parameters provide a rapid, comprehensive diagnosis. • Pseudorandom signal processing. • STAT mode provides up-to-the-minute hemodynamic assessment. • Trended indexed or non-indexed parameters are available at the touch of a button. • Service and extended warranties are available for the Vigilance II monitor. For more information Comprehensive Hemodynamic Monitoring please speak with an Edwards sales representative or call 800-822-9837. TM min Model Description VIG2 Continuous cardiac output computer system with SvO2 and CEDV capabilities Vigilance II Monitor Accessories Model Description Unit of Measure 70CC2 Vigilance monitor patient CCO cable EA 93522 In-line injectate temperature probe EA COM2PC Power cord EA OM2 Oximetry optical module EA 9850A Bath temperature probe EA For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 17 Pressure Monitoring and Closed Blood Sampling Systems TruWave Disposable Pressure Transducers The pressure monitoring kit with the TruWave disposable pressure transducer is a sterile, single-use kit that monitors blood pressure when attached to pressure monitoring catheters. • Design features a straight, flow-through design across the pressure sensor. • Available with or without the integral flush device. • Designed with a snap-tab device for square-wave testing. Snap-Tab Device Transducer Vent Port To Patient To IV Set Test Port To Monitor TruWave Disposable Pressure Transducers Model Description Unit of Measure PX600 TruWave disposable pressure transducer, one bonded 1-way shutoff stopcock CS (20) PX600F TruWave disposable pressure transducer, 3 ml/hr flush device, vent stopcock CS (20) PX600F30 TruWave disposable pressure transducer, 30 ml/hr flush device, vent stopcock CS (20) PX600I TruWave disposable pressure transducer, bonded 1-way shutoff stopcock, CS (20) bonded 3-way vent stopcock PX601 TruWave disposable pressure transducer, 12” cable CS (20) PX604 TruWave disposable pressure transducer, 4’ cable CS (20) PX604I TruWave disposable pressure transducer, 4’ cable, bonded CS (10) 1-way shutoff stopcock, bonded 3-way vent stopcock Pressure Monitoring and Closed Blood Sampling Systems For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 18 TruWave Disposable Pressure Transducer Kits Model PX212 Description Model PX600F disposable pressure transducer, flush device, IV set Unit of Measure CS (10) (macrodrip), 12” pressure tubing, one 3-way stopcock PX260 Model PX600F disposable pressure transducer, flush device, CS (10) IV set (macrodrip), 48” and 12” pressure tubing, two 3-way stopcocks PX272 Model PX600F disposable pressure transducer, flush device, IV set CS (10) (macrodrip), 60” and 12” pressure tubing, two 3-way stopcocks PX284 Model PX600F disposable pressure transducer, flush device, IV set CS (10) (macrodrip), 72” and 12” pressure tubing, two 3-way stopcocks PX1X2 Model PX600F disposable pressure transducer, two flush devices, CS (10) bifurcated IV set (macrodrip), two sets of 48” and 12” pressure tubing, three 3-way stopcocks, one 4-way stopcock PX2X2 Model PX600F disposable pressure transducer, two flush devices, CS (10) bifurcated IV set (macrodrip), two sets of 48” and 12” pressure tubing, four 3-way stopcocks PX2X3 Two model PX600F disposable pressure transducers, three flush CS (10) devices, trifurcated IV set (macrodrip), three sets of 48” and 12” pressure tubing, five 3-way stopcocks, one 4-way stopcock PX3X3 Three model PX600F disposable pressure transducers, three flush devices, CS (10) trifurcated IV set (macrodrip), three sets of 48” and 12” pressure tubing, six 3-way stopcocks PX3X3272 Three model PX600F disposable pressure transducers, three flush devices, CS (10) trifurcated IV set (macrodrip), three sets of 60” and 12” pressure tubing, six 3-way stopcocks TruWave Disposable Pressure Transducer Pediatric Neonatal Kits Model Description PX12N TruWave disposable pressure transducer, 30 cc flush device, PX24N TruWave disposable pressure transducer, 30 cc flush device, Unit of Measure CS (10) Pressure Monitoring and Closed Blood Sampling Systems 12” pediatric tubing, two 3-way stopcocks CS (10) 24” pediatric tubing, two 3-way stopcocks PX36N TruWave disposable pressure transducer, 30 cc flush device, CS (10) 36” pediatric tubing, two 3-way stopcocks For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 19 VAMP Closed Blood Sampling System Venous Arterial blood Management Protection system is a needleless closed blood sampling system. • When attached to pressure monitoring lines, the VAMP system provides a safe and convenient method for the withdrawal of blood samples. • Designed for use with all disposable pressure transducers and for connection to central line catheters and arterial catheters. • Versatile design can be bracket mounted on an IV pole or used as an arm-mount depending on the application. • A needleless sampling port. Proximal (To Patient) Reservoir Sampling Site Shut Off Valve Distal VAMP System Kits Model Description VMP106 6” sampling kit, sample site, reservoir and two shut-off valves (may Unit of Measure CS (20) be used for venous applications without a flow controlling device) 48VMP120 20” sampling kit, sample site and arm reservoir CS (20) 48VMP160 60” sampling kit, sample site and arm reservoir CS (20) 48VMP172 72” sampling kit, sample site and arm reservoir CS (20) Pressure Monitoring and Closed Blood Sampling Systems 48VMP184 84” sampling kit, sample site and arm reservoir CS (20) 48VMP260 60” sampling kit, sample site and pole-mount reservoir CS (20) 48VMP272 72” sampling kit, sample site and pole-mount reservoir CS (20) 48VMP284 84” sampling kit, sample site and pole-mount reservoir CS (20) 48AVMP VAMP system anesthesia kit, 68” sampling kit with male/female connector CS (20) For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 20 VAMP Plus System Kits Venous Arterial blood Management Protection Plus system allows the withdrawal of blood samples from pressure monitoring lines. • Designed for use with disposable pressure transducers and for connection to central line catheters, venous catheters, and arterial catheters where the system can be flushed clear after sampling. • One-handed pole-mount provides a simple method of drawing the clearing volume. • Blood sample sites incorporate familiar needleless technology for added safety. Shut Off Valve 12 cc Reservoir Dual Sampling Sites Model VP1 Description VAMP Plus system reservoir with 60” patient tubing and one sample site Unit of Measure CS (10) located 55” from the patient VP2 VAMP Plus system reservoir with 60” patient tubing and two sample sites CS (10) Pressure Monitoring and Closed Blood Sampling Systems located 13” and 55” from the patient VAMP System Accessories Model Description Unit of Measure VMP400 VAMP system needleless cannula CS (200) VMP503H 3 cc heparin coated ABG syringe with VAMP needleless cannula* CS (50) 48VMP600 VAMP system blood transfer unit (BTU) for sample transfer to vacuum tubes CS (50) VMP700 VAMP system direct draw unit for direct line blood sampling CS (50) * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 21 VAMP Jr. System Kits The VAMP Jr. closed blood sampling system provides a safe and convenient method for withdrawing blood samples. • Designed for connection to umbilical, arterial, and central line catheters and for use with disposable and reusable pressure transducers, if desired. • The VAMP Jr. reservoir is used for drawing and retaining diluted blood (or clearing volume) from an in-line sampling site. 2cc 1cc Distal Proximal (To Patient) Needle*Less Sampling Site Shut-Off Valve Reservoir Needle*Less Shut-Off Access/Flush Site Valve Model Description Unit of Measure VMP306 2” proximal, 4” distal for neonatal application CS (20) VMP406 3” proximal, 3” distal for pediatric application CS (20) VMP426 10” proximal, 16” distal for pediatric application CS (20) VMP448 19” proximal, 29” distal for pediatric application CS (20) Pressure Monitoring and Closed Blood Sampling Systems For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 22 TruWave Transducers/VAMP System Combination Kits Model PXVMP120 Description 20” VAMP system with arm-mount reservoir with Unit of Measure CS (10) TruWave disposable pressure transducer PXVMP160 60” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP172 72” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP184 84” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP260 60” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP272 72” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP284 84” VAMP system with arm-mount reservoir with CS (10) TruWave disposable pressure transducer PXVMP2X21 60” VAMP system with arm-mount reservoir on the arterial line with two CS (10) TruWave disposable pressure transducers with two 3 ml/hr flush devices, bifurcated IV set (macrodrip), one set of 48” and 12” pressure tubing, three 3-way stopcocks PXVMP2X22 60” VAMP system with pole-mount reservoir on the arterial line with two CS (10) TruWave disposable pressure transducers with two 3 ml/hr flush devices, bifurcated IV set (macrodrip), one set of 48”and 12” pressure tubing, three 3-way stopcocks PXVMP2X31 60” VAMP system with arm-mount reservoir on the arterial line with two CS (10) TruWave disposable pressure transducers with two 3 ml/hr flush devices, trifurcated IV set (macrodrip), pressure selection stopcocks, two sets of 48” and 12” pressure tubing, five 3-way stopcocks PXVMP3X31 60” VAMP system with arm-mount reservoir on the arterial line with three CS (10) TruWave disposable pressure transducers with three 3 ml/hr flush devices, trifurcated IV set (macrodrip), two sets of 48” and 12” pressure tubing, five 3-way stopcocks 72” VAMP system with pole-mount reservoir on the arterial line with three CS (10) Pressure Monitoring and Closed Blood Sampling Systems PXVMP3X32 TruWave disposable pressure transducers with three 3 ml/hr flush devices, trifurcated IV set (macrodrip), two sets of 60” and 12” pressure tubing, five 3-way stopcocks PXAVMP VAMP sampling kit with TruWave disposable pressure transducer, CS (10) 68” total tubing, male connector PXAVMP3 VAMP sampling kit with three TruWave disposable pressure transducers, CS (10) 68” total tubing, male connector For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 23 TruWave Transducers/VAMP Plus System Combination Kits Model Description PXVP2260 TruWave disposable pressure transducer/VAMP Plus system kit with 60” Unit of Measure CS (10) patient tubing and two sample sites located 13” and 55” from the patient PXVP2272 TruWave disposable pressure transducer/VAMP Plus system kit with 72” CS (10) patient tubing and two sample sites located 13” and 55” from the patient PXVP2284 TruWave disposable pressure transducer/VAMP Plus system kit with 84” CS (10) patient tubing and two sample sites located 13” and 55” from the patient PXVP23X3 TruWave disposable pressure transducer/VAMP Plus system kit with three CS (10) TruWave transducers, 60” patient tubing and two sample sites located 13” and 55” from the patient TruWave Transducers/VAMP Jr. System Combination Kits Model Description VMP306PX 30 cc TruWave disposable pressure transducer, with 2” proximal, 4” distal VMP406PX 3 cc TruWave disposable pressure transducer, with 3” proximal, 3” distal VMP426PX 3 cc TruWave disposable pressure transducer, with 10” proximal, 16” distal VMP448PX 3 cc TruWave disposable pressure transducer, with 29” proximal, 18” distal Unit of Measure CS (10) VAMP Jr. system for neonatal application CS (10) VAMP Jr. system for pediatric application CS (10) VAMP Jr. system for pediatric application CS (10) VAMP Jr. system for pediatric application Pressure Monitoring and Closed Blood Sampling Systems For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 24 TruWave Disposable Pressure Transducer Accessories Model Description Unit of Measure DTH4 Backplate holder for disposable pressure transducers CS (10) DTSC IV pole clamp for model DTH4 backplate holder EA DTSS Arm strap for model PX-series disposable pressure transducer CS (10) AM300 Adhesive body mount for disposable pressure transducer CS (100) 59PXCAL TruCal pressure transducer simulator for TruWave disposable EA pressure transducers PHYSIOTRAC PhysioTrac laser leveler EA PXSIM Pressure transducer simulator tester tubing set for TruWave EA disposable pressure transducer used in conjunction with 59PXCAL PX1800 Reusable cable for use with TruWave disposable pressure transducers EA (monitor information must be specified when ordering) TruWave Disposable Pressure Transducer Arterial Turnarounds Model Description Unit of Measure 1WV06 6” pressure tubing, low volume, bonded to 1-way stopcock CS (20) K16906 6” pressure tubing, low volume, bonded to 3-way stopcock CS (20) K16912 12” pressure tubing, low volume, bonded to 3-way stopcock CS (20) TruWave Disposable Pressure Transducer Continuous Flush Devices Model Description Unit of Measure 55UF100 Flush device, flow rate 3 ml/hr CS (20) 55UF130 Flush device, flow rate 30 ml/hr CS (20) Model Description 54IV12 Single line macrodrip IV set with 60” main line 54IV22 Bifurcated macrodrip IV set with 36” main line and 9” extension legs CS (10) IV32 Trifurcated macrodrip IV set with 36” main line and 9” extension legs CS (20) Pressure Monitoring and Closed Blood Sampling Systems TruWave Disposable Pressure Transducer IV Sets Unit of Measure CS (10) For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 25 TruWave Disposable Pressure Transducer Accessories Model Description Unit of Measure 50P106 Male/female connectors, 6” long CS (20) 50P112 Male/female connectors, 12” long CS (20) 50P124 Male/female connectors, 24” long CS (20) 50P136 Male/female connectors, 36” long CS (20) 50P148 Male/female connectors, 48” long CS (20) 50P160 Male/female connectors, 60” long CS (20) 50P172 Male/female connectors, 72” long CS (20) 50P184 Male/female connectors, 84” long CS (20) 50P200R Male/male luer lock adapter with rotating nut CS (20) 50P206 Male/male connectors, 6” long CS (20) 50P212 Male/male connectors, 12” long CS (20) 50P224 Male/male connectors, 24” long CS (20) 50P236 Male/male connectors, 36” long CS (20) 50P248 Male/male connectors, 48” long CS (20) 50P260 Male/male connectors, 60” long CS (20) 50P272 Male/male connectors, 72” long CS (20) 50P284 Male/male connectors, 84” long CS (20) TruWave Disposable Pressure Transducer Stopcocks and Caps Model Description Unit of Measure 1WSC One-way sterile stopcock CS (50) 3WSC Three-way sterile stopcock CS (50) 4WSC Four-way sterile stopcock CS (50) 59L3WSC Lipid resistant 3-way stopcock CS (20) 59L4WSC Lipid resistant 4-way stopcock CS (20) MNVC Sterile, non-vented male cap CS (50) Pressure Monitoring and Closed Blood Sampling Systems For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 26 Pediatric Hemodynamic Monitoring Pediatric Hemodynamic Monitoring PediaSat Oximetry Catheters PediaSat oximetry catheters are pediatric central venous catheters with the added capability for the continuous monitoring of central venous oxygen saturation (ScvO2). • Continuous ScvO2 monitoring to assess the balance of oxygen delivery and consumption. • Sized for pediatrics. • Easy to insert using same insertion technique as that of central lines. • Offers high flow rates and convenient administration of fluids. • Compatible with Edwards optical module and Edwards monitors including: Vigileo, Vigilance II and Explorer monitors and SAT-2 device. PediaSat Double Lumen Catheters Model Description Size (F) # Lumens Length (cm) XT245HK PediaSat oximetry catheter kit* 4.5 2 5 XT245K PediaSat oximetry catheter kit 4.5 2 5 XT248HK PediaSat oximetry catheter kit* 4.5 2 8 XT248K PediaSat oximetry catheter kit 4.5 2 8 Size (F) Unit of Measure Length (cm) 5.5 3 8 PediaSat Triple Lumen Catheters Model Description XT358HK PediaSat oximetry catheter kit* XT358K PediaSat oximetry catheter kit 5.5 3 8 XT3515HK PediaSat oximetry catheter kit* 5.5 3 15 XT3515K PediaSat oximetry catheter kit 5.5 3 15 * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 27 Pediatric Hemodynamic Monitoring Swan-Ganz Pediatric Catheters Swan-Ganz pediatric catheters serve as diagnostic tools for the physician to continuously monitor mixed venous oxygen saturation. • The Swan-Ganz pediatric catheters enable monitoring of hemodynamic pressures, cardiac output, and continuous mixed venous oxygen staturation. Thermistor Thermistor Connector Balloon Inflation Valve Optical Module Connector Balloon Distal Lumen RV Port @ 19 cm Distal Lumen Hub RV Paceport Lumen Hub (Pacing/Infusion) Model Description 040F4 040HF4 Proximal Injectate Lumen Hub Proximal Injectate Port @ 30 cm Size (F) Useable Length (cm) Small French oximetry catheter 4 40 Small French oximetry catheter* 4 40 015F4 Small French oximetry catheter 4 25 015HF4 Small French oximetry catheter* 4 25 TruWave Disposable Pressure Transducer Pediatric Neonatal Kits The pressure monitoring kit with the TruWave disposable pressure transducer is a sterile, single-use kit that monitors blood pressure when attached to pressure monitoring catheters. Model Description PX12N TruWave disposable pressure transducer, 30 cc flush device, Unit of Measure CS (10) 12” pediatric tubing, two 3-way stopcocks PX24N TruWave disposable pressure transducer, 30 cc flush device, CS (10) 24” pediatric tubing, two 3-way stopcocks PX36N TruWave disposable pressure transducer, 30 cc flush device, CS (10) 36” pediatric tubing, two 3-way stopcocks * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 28 Pediatric Hemodynamic Monitoring VAMP Jr. Closed Blood Sampling System The VAMP Jr. closed blood sampling system provides a safe and convenient method for withdrawing blood samples. • Designed for connection to umbilical, arterial, and central line catheters and for use with disposable and reusable pressure transducers, if desired. • The VAMP Jr. reservoir is used for drawing and retaining diluted blood (or clearing volume) from an in-line sampling site. 2cc 1cc Distal Proximal (To Patient) Needle*Less Sampling Site Model Shut-Off Valve Reservoir Needle*Less Shut-Off Access/Flush Site Valve Description Unit of Measure VMP306 2” proximal, 4” distal for neonatal application CS (20) VMP406 3” proximal, 3” distal for pediatric application CS (20) VMP426 10” proximal, 16” distal for pediatric application CS (20) VMP448 19” proximal, 29” distal for pediatric application CS (20) TruWave Transducers/VAMP Jr. System Combination Kits Model Description VMP306PX 30 cc TruWave disposable pressure transducer, with 2” proximal, VMP406PX 3 cc TruWave disposable pressure transducer, with 3” proximal, VMP426PX 3 cc TruWave disposable pressure transducer, with 10” proximal, Unit of Measure CS (10) 4” distal VAMP Jr. system for neonatal application CS (10) 3” distal VAMP Jr. system for pediatric application CS (10) 16” distal VAMP Jr. system for pediatric application VMP448PX 3 cc TruWave disposable pressure transducer, with 19” proximal, CS (10) 9” distal VAMP Jr. system for pediatric application For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 29 Central Venous Access Vantex Central Venous Catheters Vantex catheters with Oligon** material, are the first central venous catheters made of a biocompatible and antimicrobial** material. • The Vantex central venous catheters are the only central venous catheters extruded from polyurethane, combined with the natural elements of silver, carbon and platinum. • The Oligon material releases silver ions from the device surfaces, which kills colonizing bacteria. Proximal Lumen Sheath Distal Lumen Suture Ring Suture Wings Medial Lumen Vantex Double Lumen Catheters – 7 French Central Venous Access Model Description A2716HKIC Expanded kit with heparin, Interlink Size (F) Unit of Measure Length (cm) 7 CS (5) 16 7 CS (5) 16 7 CS (5) 20 Size (F) Unit of Measure Length (cm) 8.5 CS (5) 16 8.5 CS (5) 20 8.5 CS (5) 20 injection sites and ChloraPrep preoperative skin preparation* SA2716HKI Safety kit with heparin, ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector* A2720HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* Vantex Double Lumen Catheters – 8.5 French Model A2816HKIC Description Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* A2820HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* SA2820HKI Safety kit with heparin, ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector* Non-heparin kits also available. * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. ** Vantex catheters contain an integrated Oligon antimicrobial material. The activity of the antimicrobial material is localized at the catheter surfaces and is not intended for treatment of systemic infections. In vitro testing demonstrated that the Oligon material provided broad-spectrum effectiveness (≥ 3 log reduction from initial concentration within 48 hours) against the organisms tested: Staphylococcus aureus, Staphylococcus epidermidis, Klebsiella pneumoniae, Enterococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, Acinetobacter calcoaceticus, Corynebacterium diphtheriae, Enterobacter aerogenes, GMRSa, Pseudomonas aeruginosa, Candida glabrata and VRE (Enterococcus faecium). † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 30 Vantex Triple Lumen Catheters – 7 French Model Description A3716HKIC Expanded kit with heparin, Interlink Size (F) Unit of Measure Length (cm) 7 CS (5) 16 7 CS (5) 20 7 CS (5) 16/20 Size (F) Unit of Measure Length (cm) 8.5 CS (5) 16 8.5 CS (5) 20 Size (F) Unit of Measure Length (cm) 7 CS (4) 16/20 injection sites and ChloraPrep preoperative skin preparation* A3720HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* SA3716HKI / Safety kit with Point-Lok needle protection SA3720HKI device, ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector* Model Description A4816HKIC Expanded kit with heparin, Interlink Central Venous Access Vantex Quad Lumen Catheters – 8.5 French injection sites and ChloraPrep preoperative skin preparation* A4820HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* Vantex Safety Kit PLUS Model Description SSA3716HKI/ Safety kit with maximal barrier SSA3720HKI precautions including full body drape, cap, mask, gown and insertion checklist* Non-heparin kits also available. * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 31 Multi-Med Central Venous Catheters These versatile catheters are designed for a variety of uses. • Multiple uses include fluid administration, blood sampling and pressure monitoring. • Multi-Med catheter kits contain a guidewire insertion device. • Available with needleless injection sites - Interlink or CLC 2000 connector. • Also available with or without AMC Thromboshield* coating, an antimicrobial† heparin coating. Proximal Lumen Sheath Distal Lumen Suture Ring Medial Lumen Suture Wings Central Venous Access Multi-Med Single Lumen Catheters Model Description Size (Gauge/F) Unit of Measure Length (cm) M12013K M11620HKIC 20 ga x 5 1/8” (13 cm) expanded kit 3F/20g CS (5) 13 16 ga x 8” (20 cm) expanded kit with 5F/16g CS (5) 20 6F/14g CS (5) 20 Size (F) Unit of Measure Length (cm) 7 CS (5) 16 7 CS (5) 20 heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* M11420HKIC 14 ga x 8” (20 cm) expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* Multi-Med Double Lumen Catheters – 7 French Model Description M2716HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* M2720HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* Non-heparin kits also available. * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 32 Multi-Med Double Lumen Catheters – 8.5 French Model Description M2816HKIC Expanded kit with heparin, Interlink injection Size (F) Unit of Measure Length (cm) 8.5 CS (5) 16 8.5 CS (5) 20 Size (F) Unit of Measure Length (cm) 7 CS (5) 16 7 CS (5) 16 7 CS (5) 20 7 CS (5) 20 Size (F) Unit of Measure Length (cm) 8.5 CS (5) 16 8.5 CS (5) 20 sites and ChloraPrep preoperative skin preparation* M2820HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* Multi-Med Triple Lumen Catheters – 7 French Model Description M3716HKIC Expanded kit with heparin, Interlink injection SM3716HKI Safety kit with ChloraPrep preoperative skin sites and ChloraPrep preoperative skin preparation* preparation, SafetyGlide needles, Futura safety M3720HKIC Expanded kit with heparin, Interlink injection Central Venous Access scalpel and CLC 2000 connector* and ChloraPrep preoperative skin preparation sites* SM3720HKI Safety kit with ChloraPrep preoperative skin preparation, SafetyGlide needles, Futura safety scalpel and CLC 2000 connector* Multi-Med Quad Lumen Catheters Model Description M4816HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* M4820HKIC Expanded kit with heparin, Interlink injection sites and ChloraPrep preoperative skin preparation* * All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis, Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus. † Decreases viable microbe count on surface of product during handling and placement. For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 33 Customer Service and Ordering Information Ordering Information Mailing Address Edwards Lifesciences One Edwards Way Irvine, CA 92614 Telephone General Offices Customer Service Customer Service (fax) Technical Support 24-Hour Emergency Assistance 949-250-2500 800-424-3278 (or 949-250-2500) 800-422-9329 (or 949-250-3489) 800-822-9837 (or 949-250-2222) Electronic Edwards Lifesciences is a partner of the Global Healthcare Exchange (GHX). You may also place orders on-line with My Account, Edwards web ordering system, at www.Edwards.com. For more information about buying our products using My Account or GHX, please speak with a Customer Service Representative. Web Site www.Edwards.com/CriticalCare In Canada Edwards Lifesciences, Inc. 800-268-3993 Terms and Conditions Prices subject to change without prior notice. All applicable taxes will be charged. Payment Net 30 days except in Canada where payment terms are in accordance with those stated on the invoice. Freight FOB shipping point (prepaid and billed). All merchandise should be inspected on arrival. If merchandise has been damaged in transit, please instruct your receiving department to refuse delivery; then notify Customer Service for further instructions. Return Goods Policy Edwards Lifesciences is committed to providing our customers with quality products and service. For this reason, we will happily accept any product for return that: • is a result of error by Edwards • does not perform to specification Full credit or replacement will be issued for these products, and no restocking fee will be assessed. Products returned for other than the above reasons will be subject to a 20% restocking fee. Authorization is required for all returns. Authorization may be obtained through the Customer Service Department. A Return Goods Authorization number will be issued, and this number must be referenced on all returned packages. The following merchandise is not acceptable for return: Customer Service and Ordering Information • sterile items that are returned without the factory seals intact • special order products • incomplete kits or cases • product which has less than 13 months of shelf life Products that have been used must be packaged as described in “Instructions for Returning Used Products.” A Technical Support Hotline is available for discussion of all issues regarding disposable products and electronic equipment repair. For technical assistance on these issues, please call: 1-800-822-9837 or 949-250-2222. A Technical Support Specialist will review the problem and issue authorization for the return if the problem cannot be resolved. This authorization is required on all electronic equipment issues. Please be prepared to provide the Technical Support Representative with a purchase order number for the repair. As part of an ongoing effort to improve the quality of our products, we would like any defective product to be returned for evaluation. Credit or replacement will be issued upon Edwards receipt of the defective product. For educational materials to supplement any of the products in this catalog visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 34 Instructions for Returning Used Product Edwards Lifesciences requests that all products be double-bagged prior to returning them and, if possible, please follow these instructions prior to bagging: • Prior to handling used product, put on disposable gloves and gown according to hospital procedures. • Visually inspect the product and remove all needles. • Remove all external organic material by carefully wiping the exterior surface with gauze pad or paper towel saturated with tap water. • Carefully wipe exterior surface of electrical components and connections. • Wipe dry with gauze or paper towel. • Wiping may also be done using one of the following: -rubbing alcohol -normal saline -Cidex -Omnicide • Do not use any other cleansing agents other than those listed above; other agents may interfere with evaluation testing. • CAUTION: Do not flush blood products from lumens or pressure tubing. Do not immerse or submerge product in water. Do not wrap product in tissue paper or apply adhesive tape directly to product; attachments to the product or writing on the product may interfere with evaluation testing. • Double-bag using two self-sealing plastic bags. First, place product in one bag and seal. Then place bagged product in second bag and seal. • Wash hands with soap and water. • Complete Returned Goods Documentation, describing the reason for return, and staple or paper clip it to top of plastic bag. NOTE: Documentation must remain on the outside of the plastic bag to avoid contamination. Attach customer identification label to outside of plastic bag. Place bagged product into shipping container, place mailing label with Edwards Lifesciences address on the shipping container, and mark the container with the wording “Used Product.” For Return of Multiple Components or Kits: • Double-bag each complete kit separately. • Place all individual plastic bags in one large plastic bag, when possible. Then place large bag in shipping container. Reminder: The purpose of this procedure is only to clean the outer surface area of used product, not to decontaminate it. Should you have any questions regarding these procedures, please call the Edwards Lifesciences Complaints Hotline at 800-424-3278 or 949-250-3612. In Canada, please call: 800-268-3993 or: 905-821-9660 Return Address Customer Service and Ordering Information All Products Edwards Lifesciences Corporation 1402 E. Alton Avenue Irvine, CA 92606 USA Attention Return Goods - RGA #______________________ Technical Assistance - 24 Hours For technical assistance relative to the use, care, and operation of critical-care products, call toll-free 800-822-9837 or 949-250-2222, or via e-mail at tech_support@edwards.com For educational materials to supplement any of the products in this catalog visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative. 35 Notes A heritage of developing leading solutions that advance the care and treatment of the critically ill Since the introduction of the Swan-Ganz catheter in the early 1970s, Edwards Lifesciences has partnered with clinicians to develop products and systems that advance the care and treatment of the critically ill. What has resulted is an extensive line of hemodynamic monitoring tools including catheters, sensors and bedside patient monitors that continue to build on this gold standard in critical care medicine. Critical care clinicians around the world have used Edwards products to clinically manage more than 30 million patients. Hemodynamic monitoring products such as Swan-Ganz catheters, the FloTrac system and PreSep and PediaSat oximetry catheters enable clinicians to make more informed and rapid decisions when treating patients in surgical and critical care settings. For educational information visit: www.Edwards.com/CriticalCare Rx only. See instructions for use for full prescribing information. Edwards, Chandler, CO-Set+, Flex-Tip, IntroFlex, SAT-2, and Vigilance II are trademarks of Edwards Lifesciences Corporation. Edwards Lifesciences, the stylized E logo, AMC Thromboshield, CardioCath, CCOmbo, CCOmbo V, ControlCath, Explorer, FloTrac, Hi-Shore, Multi-Med, Paceport, PediaSat, PreSep, Swan-Ganz, TruCal, TruWave, VAMP, VAMP Jr., VAMP Plus, Vantex, Vigilance, Vigileo, VIP, and VIP+ are trademarks of Edwards Lifesciences Corporation and are registered in the U.S. Patent and Trademark Office. ChloraPrep is a trademark of Medi-Flex, Inc. CLC 2000 is a registered trademark of ICU Medical, Inc. Early Goal-Directed Therapy is a service mark of Dr. Emanuel Rivers. EGDT is a registered service mark of Dr. Emanuel Rivers. Futura is a trademark of Futura Medical Group. Interlink is a trademark of Baxter International, Inc., registered in the U.S. Patent and Trademark Office. Oligon is a trademark of Implemed, Inc. Omnicide is a trademark of Southern Mill Creek Products Co., Inc. PhysioTrac is a trademark of Jetcor, Inc. Point-Lok is a trademark of Portex, Inc. SafetyGlide is a trademark of Becton, Dickenson and Company. © 2009 Edwards Lifesciences LLC. All rights reserved. AR04126 Edwards Lifesciences LLC · One Edwards Way · Irvine, CA 92614 USA · 949.250.2500 · 800.424.3278 · www.Edwards.com/CriticalCare