jeffrey rader corporation - Myron Bowling Auctioneers

Transcription

jeffrey rader corporation - Myron Bowling Auctioneers
PUBLIC AUCTION
BINNS & BERRY 33.46" X 250" ENGINE LATHE
Plant Closing
JEFFREY RADER
CORPORATION
398 Willis Road in Woodruff, South Carolina 29388
WEDNESDAY ,
AUGUST 22nd at 10AM
Inspection: Day Prior from 9AM - 4PM
CINCINNATI GILBERT TRAVELING HEAD CNC BORING MILL
RICHARD DUDGEON 4-POST
750-TON STRAIGHTENING PRESS
Sale Conducted By:
GIDDINGS & LEWIS 2-AXIS CNC 800 VTL
ROUNDO 5" X 5" X 5/8"
ANGLE BENDING ROLL
CINCINNATI 600 TON-HYDRAULIC PRESS BRAKE
PACIFIC 12' X 1/2" HYDRAULIC PLATE SQUARING SHEAR
In Conjunction With:
MITTS & MERRILL
9BHD KEYSEATER
BULLARD 46” DYNATROL VTL
GIDDINGS & LEWIS 2-AXIS CNC 800 VTL
VERTICAL
TURRET LATHES
GIDDINGS & LEWIS 2-Axis CNC Vertical
Turret Lathe, Model CNC800, S/N 512-11179, 48" Table, 60" Max. Swing, 48" Under
Rail, 60-HP, Right Hand Head, Right Hand
12-Position ATC, Power Draw Bar, Optional
Thread Cutting, Jorgensen Chip Conveyor,
ELO Touch Screen w/CNC Control
BULLARD 46" Dynatrol Vertical Turret
Lathe, S/N 32521, 56" Swing, 60" Under
Rail, 5-Position Top Turret Ram, Side Ram,
Acu-Rite Turnvision DRO
HORIZONTAL
BORING MILLS
GIDDINGS & LEWIS PC-50X PRODUCTION MILL
CINCINNATI GILBERT TRAVELING HEAD CNC BORING MILL
CINCINNATI GILBERT Table Type Traveling
Head CNC Horizontal Boring Mill, 5-1/2”
Spindle Dia., 60" x 194.5” T-Slot Table, 14'
Vertical Head Travel, 50-Taper Spindle, 90°
Head, GE Fanuc 18-M CNC Control
GIDDINGS & LEWIS CNC Table Type
Horizontal Boring Mill, Model PC-50X CNC
Production Center, S/N 50-1594-78, 5”
Spindle Dia., 48” x 74” T-Slot Table, 60”
Vertical Head Travel, 50-Taper Spindle,
Numeric Path CNC 800M Control
GIDDINGS & LEWIS Table Type Horizontal
Boring Mill, Model 350, S/N 5326, 5”
Spindle Dia., 60” x 122” T-Slot Table, 60”
Vertical Head Travel, 6.25-1500 RPM
Spindle, Tail Stock
VERTICAL
BORING MILL
GIDDINGS & LEWIS 350 TABLE TYPE HBM
PACIFIC 12' X 1/2" HYDRAULIC PLATE SQUARING SHEAR
KING 52" Vertical Boring Mill, S/N 3208,
56" Swing, 60" Under Rail, Top & Side Ram,
2.25 - 72.1 RPM, 4-Jaw Chuck
CNC LATHES
BINNS & BERRY CNC Lathe, Model Data
90, S/N 80084, 12” Power Chuck, 27.55”
Swing Over Bed, 118.11” Between Centers,
1250 RPM Spindle, 3-1/2” Thru Spindle, 8Position Tool Holder, Threading, Turbo Chip
Conveyor, Fagor CNC Control
WARNER & SWASEY Slantbed CNC
Lathe, Model SC-28, Type M-4530, Lot 712,
S/N 2647356, 24” 3-Jaw Chuck, 2-Axis DRO,
6-Position Tool Holder, 27.99” Cut Dia, 60.23”
Cut Length, 6.25” Bar Capacity, Allen Bradley
9 Series CNC Control
CNC VERTICAL
MACHINING CENTER
CINCINNATI 10' X 1/4"
MECHANICAL PLATE SQUARING SHEAR
PEXTO 52” ELECTRIC POWER SQUARING SHEAR
HILLYER CNC Vertical Machining Center,
Model 600, 64” x 48” T-Slot Table, CAT 50
Spindle, Travels: 40" X-Axis, 64" Y-Axis, 18"
BINNS & BERRY DATA 90 CNC LATHE
KING 52” VERTICAL BORING MILL
ROUNDO 5" X 5" X 5/8"
ANGLE BENDING ROLLS
STRAIGHTENING PRESS RAM AND BRIDGE
GRAY DOUBLE HOUSING
PLANER MILL
WARNER & SWASEY SC-28 SLANT BED LATHE
NUMEROUS TUBE & ANGLE BENDING DIES
ROUNDO 8' X 9/16" PLATE BENDING ROLLS
Z-Axis, 4,000 RPM, 28-Position ATC, Allen
Bradley 8200 CNC Control
WHEEL PRESS
NILES 96” x 210” Wheel Press, 600-Ton (Est.)
CNC MILL
KEARNEY & TRECKER CNC Mill, Model
Datamill 700, S/N 7086228, 27-1/2” x 94-1/2”
T-Slot Table, CAT 50 Spindle, 90° Head,
Gemini CNC Control, Turbo Chip Conveyor
SHEARS
PACIFIC 12' x 1/2" Capacity Hydraulic
Plate Squaring Shear, Model 500R-12, S/N
S10532, Roller Ball Table, 120" Squaring
Arm, 36" Power Back Gage
CINCINNATI 10' x 1/4" Capacity
Mechanical Plate Squaring Shear, Model
1810, S/N 26607, 125" Squaring Arm, 36"
Power Back Gage
PEXTO 52” x 16-Ga. Power Squaring
Shear, Model PH52, S/N 740623, 50”
Squaring Arm
PLATE, ANGLE & PIPE
BENDING ROLLS
1998 ROUNDO 8' x 9/16" Plate Bending
Rolls, Model PS255, S/N 986900
ROUNDO 5" x 5" x 5/8" Angle Bending
Rolls, Type R6, S/N 71528
58", 32" & 30" Electric Plate Bending
Rolls
PEDRICK Pipe Bender, S/N 30
PRESSES
RICHARD DUDGEON 4-Post 750-Ton
Straightening Press, 12' x 18' x 15'H
Overall, 10' x 15'-8" Between Posts,
Adjustable Bridge & Ram, 9" Diameter Ram,
CINCINNATI 600-TON HYDRAULIC PRESS BRAKE
PACIFIC 225-TON HYDRAULIC PRESS BRAKE
1/2-Ton Jib, 30-HP Hydraulics
(2) GENERAL MFG. 60-Ton Straightening Presses,
Model 606, 10-HP
W.A. WHITNEY 90-Ton Flange Punch, Model 791, 1-3/8"
Stroke, 1-1/16" thru 7/8" Capacity, 12" Thru
W.A. WHITNEY 50-Ton Flange Punch, Model 809-348,
S/N 809-348-20307
PRESS BRAKES
CINCINNATI 600-Ton Hydraulic Press Brake, Model
600H, S/N 31506, 16' Overall, 128" Between Housings, 14"
Throat, 12" Stroke, Foot Control
PACIFIC 225-Ton Hydraulic Press Brake, Model K225-12,
S/N 5639, 10' x 5/16" Capacity, 12' Overall, 124" Between
Housings, 8" Throat, Foot Control
PLANER MILL
GRAY Double Housing Planer Mill, S/N 6882, 55-1/2” x
19' T-Slot Table, 61” Between Housing, 60” Under Rail, Dual
Head, 50 HP
NILES 600-TON (EST.) WHEEL PRESS
LATHES
BINNS & BERRY 33.46" X 250" ENGINE LATHE
BINNS & BERRY 33.46" x 250" Engine
Lathe, S/N 61669, 33.46” Swing Over Bed,
24” Swing Over Carriage, 250” Between
Centers, 40-HP Hydraulics, 6” Thru
Spindle, Threading, Turbo Chip Conveyor
Acu-Rite Turnvision DRO, 32” 4-Jaw Chuck,
21” 3-Jaw Chuck, (2) Steady Rests
LEBLOND 32” x 140" Engine Lathe, 36”
Swing Over Bed, 26" Swing Over Carriage,
140” Between Centers, 3” Thru Spindle, 55625 RPM, Threading, 27” Faceplate, 32” 4Jaw Chuck, Steady & Follow Rest
LODGE & SHIPLEY 20” x 72" Engine
Lathe, 22” Swing Over Bed, 12” Swing
Over Carriage, 72” Between Centers, 21/2” Thru Spindle, 21-1182 RPM, Steady
Rest, Threading, Taper
BARDONS & OLIVER No. 6 Turret Lathe,
S/N 19675, 6-Position Turret Lathe, S/N
19675, 6-Position Turret Tail Stock, 19”
Swing Overhead, 10” Swing Over Carriage,
40-500 RPM, Bar Feeder
WARNER & SWASEY 3A Square Head
Turret Lathe, Model AM-3500, Lot 67, S/N
2357990, 21” 3-Jaw Chuck, 12-851 RPM,
Bar Feed
MACHINE
ACCESSORIES
LODGE & SHIPLEY 20" X 72" ENGINE LATHE
LEBLOND 32” X 140" ENGINE LATHE
24" Mechanical Rotary Table, 15"
TROYKE Rotary Table
Angle Plates 47” x 59”, 60” x 61”, 60” x
60”, 96” x 72”
48” x 48” & 27” x 27” Rotary Machining
Tables
T-Slot Machining Tables, 24” x 18”, 24” x
45”, 31” x 45” x 29-3/4” x 49-3/4”, 4' x 7' x
7”, 40” x 30” x 4-1/4”, 6' x 4' x 6”
(100+) 50-Taper Tool Holders for CINCINNATI GILBERT
(50) Assorted BINN & BERRY Tool
Holders
SMW Rotary 4th Axis, Model PT315, 12”
3-Jaw, Tail Stock
15” 4-Jaw Chuck for WARNER &
SWASEY
18” 4-Jaw Chuck, 21” Face Plate
Lots of Keyseater Tooling & Collars
Assorted 4-Way & Vee Press Brake Dies,
Lengths up to 12'
Numerous Tube & Angle Bending Dies
ROTOBLAST
PANGBORN Roto Blast, Model 9LF14,
S/N 9LF14-691, 9' Rotary Table, 25" Wide
Work Width, Dust Collection System
LANDIS TYPE R 14” X 72” CYLINDRICAL GRINDER
HANCHETT MODEL 900S FACE GRINDER
CNC FABRICATOR
W.A. WHITNEY 647 Plus Panelmaster
Fabricator, S/N 642-360-40217, 72" x 148"
Roller Ball Table, 40-Ton Capacity, 20-Ga.
min to .625" Max., (2) Clamps, 3" Max.
Diameter Punch, Fleximate CNC Control
(NOTE: This Unit Does Note Have Laser
Installed)
CNC SHAPE CUTTER
1991 L-TEC Shape Cutting Table, Model
CM350-13, S/N 91-2000-3767, 31' x 13'-6"
Overall Water Table, 28'-9" x 13' ID, (5)
Oxy-Acetylene Torch Heads, (1) PT15
Water Cooled Plasma Head, PCC-8XL
Aux. Plasma Control, L-TEC CNC Control,
w/L-TEC 600-AMP Power Supply, Model
PHC-601, S/N F90N-13724
IRONWORKER
MARVEL 15A9 HORIZONTAL BAND SAW
L-TEC CM350-13 SHAPE CUTTING TABLE
BUFFALO #1-1/2 Ironworker, S/N 56-Z6502, 1-1/6" Punch Thru 3/4", 10" x 5/8"
Shear, 5" x 5" x 1/2" Angle, 1-7/8" Round,
Notcher
WELDERS & RELATED
K&T DATAMILL 700 CNC MILL
LARGE CAPACITY ANGLE PLATES
ARONSON Radiograph Flame Cutter,
Model 10B, 4 to 50-IPM, (2) 6' Section
Track
(2) MILLER Deltaweld 651 MIG Welders,
S/N KA867078 & KA748216, 650-AMP,
w/Miller S-52E Wire Feeder & Bernard
Remote Boom
MILLER Deltaweld 650 MIG Welder, S/N
JJ383303 Miller S/N S-52E Wire Feeder,
Bernard Boom Cart
(7) MILLER MP-65E MIG Welders, 650AMP, S/N HD723353; S/N JA404995
w/Miller JA-4 Remote Wire Feeder &
Stand; S/N HD683701 w/Miller 60 Series
Wire Feed, Bernard Remote Stand; S/N JA
04994 w/Miller JA-25 Wire Feeder on
Stand; S/N HD683699 w/Miller S-52E Wire
Feeder, Bernard Boom Cart; S/N
JA404956; S/N HE731022
LINCOLN IDEALARC R3S-600 MIG
Welder, S/N AC-316106, Lincoln LN-7 Wire
Feed, Bernard Boom Cart
(2) LINCOLN IDEALARC DC600 MIG
Welders, S/N AC717339 & AC717341,
600-AMP, w/Lincoln LN-8 Wire Feeder &
Bernard Remote Boom
(3) MILLER DELTAWELD 450 MIG
Welders, 450-AMP, S/N JF851914 w/JA-4
Remote w/Wire Feeder & Stand; S/N
JF881702, Miller JF15 Remote Wire
Feeder & Stand; S/N JF881706, Miller S52E Wire Feed, Bernard Boom Cart
LINCOLN IDEALARC R3S-325 MIG
Welder, S/N AC-444667, 350 AMP @ 60%
MILLER CP250TS MIG Welder, S/N
HK295229, 250-AMP
AIRCO 2.5 DTR-224-A MIG Welder, S/N
P361659, 250-AMP w/Miller S-52E Wire
Feeder
MILLER SYNCROWAVE 300 TIG Welder,
S/N JB482345, 300-AMP @ 60%
w/Radiator 1 Cooler
(2) LINCOLN 300/300 TIG Welders, 300AMP @ 60%, S/N AC28879 & AC288887
LINCOLN Submerged Arc Welder, Model
SAN-600, S/N 502290, 550-AMP
HOBART Submerged Arc Welder, Model
M-300, S/N 12CW-62207, 300-AMP @
60%
LINCOLN Submerged Arc Welder, Model
SAF-600, S/N A578776, 675-AMP @ 60%
(8) LINCOLN IDEALARC TM-500/500
Stick Welders, 500-AMP @ 60%
(4) LINCOLN IDEALARC TM400/400 Stick
Welder, 400-AMP @ 60%
AIRCO Stick Welder, Model 3DDRS-24-B,
S/N P328543, 300-AMP @ 60%
TRW 3/16" to 5/8" Capacity Stud Welder,
Model 100, Series 1000, S/N 12073
MICRO AIR Fume Hood, Model MC-1500
(2) PHOENIX Dryrod Ovens, Type 300,
Model 13, 1,000 Watt, 100-550°F
VICKERS 72" Hydraulic Rotary Table,
Model FY180B
MILLER JF 15 & HOBART 27 Wire
Feeders • (30) Welding Curtains & Frames
• (8) 6' x 10' Acorn Welding Tables • (4)
Oxy-Acetylene Torch Carts • Torch Heads •
Hoses • Regulators • HOBART Welding
Wire, S/N S245812-053 • ESAB Dual
Shield Welding Wire, S/N 245019260 • MIG
Weld Gun Repair Parts • (50) WELDSCALE Clamps • METCO Metal Sprayer
PANGBORN ROTO BLAST,
MODEL 9LF14
BARDONS & OLIVER #6 TURRET LATHE
KEYSEATERS
W.A. WHITNEY 647 PLUS PANELMASTER
WARNER & SWASEY 3-A TURRET LATHE
BUFFALO 1-1/2 IRONWORKER
MITTS & MERRILL Keyseater Model 9BHD, S/N 81045, 60” x 5” Capacity, 48” x 48”
Table, Red Iron Control (Note This Unit
Takes a 12' it)
HANSFORD DAVIS Keyseater, Model 15,
S/N 15-1358, 18” Max Cut Length, 1/16” to
1-1/2” Width, 20” x 31” Table
ADVANCE
NOTICE
EMAILS
SAWS
MARVEL 16" x 20" Horizontal Band Saw,
Model 15A9, S/N E-153024W, 50-400
FPM, 24” Shuttle Table, 23” x 20' Power
Roller, (2) 17” x 8' Roller Conveyor
MARVEL Vertical Band Saw, Model
81A9/M3M, S/N E-364988-I, 19” Throat,
21” Max. Thickness, Travel / Tilt Head, 26” x
30” Work Table w/Vise, 30” Stock Feeder,
24' x 22” Power Feed Roller
PEERLESS 40" Vertical Band Saw,
Model DCM-10, 12" Max. Thickness, 56" x
48" Table
CTD MACHINES Upcut Saw, Model
Whirlwind W218, S/N 2011, (2) 18" x 8'
Roller Conveyors
GRINDERS
HANCHETT Face Grinder, Model 900S,
S/N 14, 36” x 95” T-Slot Table, 36”
Segmented Wheel
LUMSDEN Rotary Surface Grinder,
Model 93ML/71, S/N 11728, 60” Max
Radius, 8” Min. Radius, 90° Max. Angle
LANDIS 14" x 72" Cylindrical Surface
Grinder, Type R, S/N 878, Barnes Drill
Coolant Filter, Model HCF-220, Landis
Controls
NORTON 12" x 36" Plain Cylindrical
Surface Grinder, S/N 27423
TAFT-PIERCE 6" x 12” Surface Grinder,
1-HP, Hand Feeds, 6 x 12” Permanent
If you would like to
receive advance notice
emails before each
auction, visit
www.myronbowling.com
and register.
MITTS & MERRILL 9BHD KEYSEATER
HANSFORD DAVIS
15 KEYSEATER
Magnet Chuck
K.O. LEE Tool & Cutter Grinder
NORTON Tool & Cutter Grinder, Model 20
PRATT & WHITNEY - KELLER Tool &
Cutter Grinder, Model R-8
STANDARD Electric Twin Wheel Tool
Grinder, Model 103, S/N 44302, 14” Wheel
HAMMOND Diamond Wheel Grinder,
Model CB-77BW, S/N 7921, 1/2-HP
GIDDINGS & LEWIS Exactamatic Drill
Sharpener, S/N 940-00552-85
OLIVER OF ADRIAN Point Grinders, S/N
1460
OLIVER OF ADRIAN Drill Point Grinder,
Model 600 & S/N G-7256
SELLERS Drill Point Grinder, Model 6G,
S/N E6545
1 0F 3
LINCOLN IDEALARC
DC-600 MIG WELDER
(3) MILLER DELTAWELD
450 MIG WELDER
CARLTON/NATCO 8' X 19” RADIAL ARM DRILL
CINCINNATI BICKFORD 15” X 6'
RADIAL ARM DRILL S/N 5E-569
GIDDINGS & LEWIS 982 NUMERIDRILL
DRILLS
EXCEED T-53 ELECTRIC TEMPERING FURNACE
(8) 6' X 10' ACORN WELDING TABLES
SURFACE COMBUSTION GAS FIRED
CAR BOTTOM FURNACE
JBI TRUCK SPRAY BOOTH
GIDDINGS & LEWIS NumeriDrill, Model
982, S/N 00078, 72” x 32-1/2” T-Slot Table,
CNC 800 Numeric Path Control
CARLTON 8' x 19" Radial Arm Drill,
Natco Drill Head, MT6 Spindle w/Quick
Change Head, 15-1500 RPM, Power
Clamp, Traverse & Elevation, 32" x 28" x
18" Tilt Box
(2) CINCINNATI BICKFORD 6' x 15”
Radial Arm Drills, MT-6 Spindle, 8-100
RPM, Quick Change Tool Holder, S/N SE544 & SE-569 w/ 26” x 32-1/2" x 17” Box
FOSDICK 24" Drill Press, 23” Table, 801500 RPM
CINCINNATI BICKFORD 21" Super
Service Drill Press, 18” Table
DELTA 17" Drill Press, 17” x 12-1/2” Table
LIFT TRUCKS
2006 HYSTER 12,000-LB. Lift Truck,
Model S120XM, S/N F004V04494D, LPG,
GM Vortex Engine, Solid Tires, Standard
Mast, 112" lift Height, 6,770 Hours.
YALE 8,000-LB. Lift Truck, Model GLC080,
4.3 Liter GM Engine, 3-Stage Mast, 4-Way
Valve.
2006 HYSTER 7,000-LB. Lift Truck, Model
S70FT, LPG, GM Engine, 3-Stage Mast,
Sideshift.
RAYMOND Standup 4,000-lb. Lift Truck,
Model EAS1, R40TT, S/N ES-D-07-15946,
250” Lift, 36V
TOYOTA 3,750-lb. Lift Truck, Model
15FGC20, S/N 5FGC25-13205, 185" Lift,
LP, Side Shift, Solid Tires, ROPS
(2) CLARK 3,650-lb. Lift Trucks, Model
CGC20, S/N C365L-0392-9484FB & C65L0178-9484FB, 189" Lift, LP, Side Shift,
Solid Tires, ROPS
CLARK 1,075-lb. Lift Truck, Model C500V40, S/N Y355-63-5092, 250" Lift, LP,
Cushion Tires, Enclosed
FURNACES
FAIRBANKS MORSE 10,000# FLOOR SCALE
LOUIS ALLIS 200-HP TEST STAND
EXCEED Electric Tempering Furnace,
Model T-53, S/N 1100, 1800°F Max
SURFACE COMBUSTION Gas Fired
Batch Hardening Car Bottom Furnace,
S/N B3883-1, 12' x 8'-6" Car, 60" Max.
Height, 1600°F Max., 4,000,000 BTU, 1990
Rebuild
DRESSER 6-Burner Gas Fired Box
Furnace, 1750°F Max., Pneumatic Door
Operation, 1,800,000 BTU
SUNBEAM 4-Burner Gas Fired Box
Furnace, 1750°F Max., 24" x 58" x 10" ID,
1,200,000 BTU
PAINT BOOTH
JBI Truck Spray Booth, Model DOS-2016S, S/N 20022, Double Door, Pass Thru
Type, 18' 6” x 27' ID, 16' Door Opening,
Down Draft, Lighted
MATERIAL HANDLING
1 OF 2 DETROIT DH-1
HARDNESS TESTERS
ELECTRONICS
TEST BENCH
75-HP TEST STAND
AUTOQUIP 6,000-lb. Lifting Table, Model
44CH60, S/N 67114161, 48" x 64" Table
CALDWELL 2-Ton Spreader Bar, 51"
Length
(18) 1-Ton Permanent Lifting Magnets
(28) 1/2-Yard & 1-Yard Dump Hoppers
Lots of Heavy Duty Steel Racking
Bridge Crane Forks
48” x 48” & 30” x 30” Air Lift Tables
(2) 15' x 6' Material Transfer Cars
(50) 40” x 40” Steel Pallets
(50) Assorted RENFOE Plate Clamps •
Lifting Chains & Straps
TESTING &
INSPECTION
1 0F 2
LOUIS ALLIS 200-HP Magnetic Drive Test
Stand
75 HP-Test Stand
(66) Sections Test Bench
SUNDSTRAND 48" x 12" Bench Centers
(2) DETROIT Hardness Testers, Model
DH1, S/N 608 & 1174
(2) KING Portable Brinnel Hardness
Testers
STARRETT 50" Vernier, STARRETT 38"
Vernier, 32" to 50" STARRETT Inside
Micrometer, Assorted Caliper Micrometers,
Thread Plug Gages
8" Indexer
(2) 5' x 10” Steel Surface Plates
SCALES
FAIRBANKS MORSE 10,000-lb. Floor
Scale, 8' x 10' Platform
TOLEDO Honest Weight 500-lb. Platform
Scale, 30" x 24" Platform
TOLEDO 75-lb. Platform Scale, 20" x 20"
Platform
TOYOTA 3,750-LB. LIFT TRUCK
(2) CLARK 3,650-LB. LIFT TRUCKS
2003
2006
MISCELLANEOUS
Remaining Inventory of Tube & Angle
Stock
Steel Layout Tables: (2) 12' x 6' x 15", (4)
12' x 6' x 4”, 12' x 6' x 1-1/4”, (2) 12' x 5' x
5", (1) 49" x 55" x 5", (1) 5" x 49" & (1) 6' x
4' x 3-1/4"
(4) 35" x 74" & (2) 48" x 48" Roller Ball
Tables
CINCINNATI MILACRON Cincool Coolant
Recovery System, P/N 3333500-1, Model
CRU-1, S/N 244
FAMCO Air Press, Model 212DE
2003 Minuteman Powerboss Floor
Scrubber/Sweeper, Model CSS - 82, S/N
13568053, 1,704 Hours.
ENERPAC 25-Ton Hydraulic Shop Press,
28-1/2” Between Housings, Electric
MATTHEWS 7-Ton Impact Press, Model
MB-32, S/N L-85
ELECTRO ARC Metal Disintegrator,
Model 26, S/N 2535, Arc-er Head
RIDGID #535 Pipe Threader
Wire Bending Machine
ROCKFORD Hydraulic 36” Slotter, S/N
6676, 15” Vise
28” x 24” x 11” & 24” x 18” x 12-1/2” Drill
Boxes
CYCLONE Dust Collector
TOSHIBA 125-HP Electric Motor & Pump
WHITNEY 10-HP Hydraulic Pump, Model
700-S-10B
STRATOFLEX Hose Cutoff Saw Model
T03-105, S/N 1180
COLL-O-CRIMP Super 1 Hose Crimper
Heavy Duty / Large Capacity Hose
Crimper
ACME 10” & PORTER CABLE 8” Belt
Grinders, Model BG8, S/N 7103
STANDARD ELECTRICS 3-HP Pedestal
Grinder & Others • HISEY-WOLF 12" &
BALDOR 5-HP & Other Double End
Grinders • BALDOR 12” Double End
Grinder, 5 HP • BALDOR 2” Belt Grinder, 11/2 HP
(4) BLOUNT Wet Grinders
52” & 40" Swing Balance Wheels
(14) EAGLE 14-Gallon Oily Waste Cans
Recirculating Parts Cleaner
(1) 8-Drawer & (2) LISTA 7-Drawer
Modular Tool Cabinets • Print File
Cabinets, 4-Drawer Files, Assorted Desks
(3) 40' Storage Containers
14' x 10' Dia. Water Storage Tank
Electric Motors • Transformers • Torpedo
Heater • Hydraulic Power Supplies • 36 Volt
Battery Charger • 2-Wheel Hand Carts •
100's of C-Clamps & Machine Clamps • Bar
Clamps • (15) CISCO Pneumatic Angle
Grinders • Electric & Pneumatic Hand Tools
• (10) SIMPLEX Jacks • (4) 40" x 33"
Double Roller Stands & Others • Metal
Horses • 7" Vise on Stand • (4) 8" Machine
Vise, V-Blocks & Angle Blocks • Lots of VBelts, Wiring, Hardware • Wall & Pedestal
Fans • Perishable Tooling, Number, Letter,
Taper Shank Drills, Reamers, End Mills,
Taps, Spade Drill Holders 1-1/2” to 4 1/8”,
Flat Bottom Drills • Hand Tools, Bench
Brushes, Air Hose, Drill Chucks, Live
Centers, Hold Down Tooling • 18” x 32”
Bench Center
HYSTER 12,000-LB. S120XM LIFT TRUCK
MINUTEMAN POWERBOSS CSS - 82 FLOOR
SCRUBBER/SWEEPER
58" ELECTRIC PLATE BENDING ROLL
ASSORTED LIFTING CHAINS
PARTIAL VIEW OF SHEET METAL INVENTORY
LOTS OF PALLET RACKING
LOTS OF STEEL RACKING
Plant Closing
JEFFREY RADER
CORPORATION
398 Willis Road
in Woodruff, South Carolina
WEDNESDAY,
AUGUST 22nd at 10AM
Inspection: Day Prior from 9AM - 4PM
CNC VTL / CNC LATHE / CNC VMC / HORIZONTAL BORING MILL / MORE
Auction Conducted By
PRESORTED
FIRST CLASS MAIL
U.S. POSTAGE
MYRON BOWLING AUCTIONEERS, INC.
P. O. Box 369, Ross, Ohio 45061
PAID
CINCINNATI, OH
PERMIT NO. 5714
FIRST CLASS MAIL
LARGE MACHINING AND FABRICATION OPERATION
Joe Oliver
Myron Bowling
Cell: 513-604-4958
Cell: 513-604-4957
myron@myronbowling.com
Christopher Lee
Cell: 513-720-1687
Tom Bowling
Cell: 513-738-3311
Kevin Gamm
Cell: 513-235-6430
Greg Hengehold
Cell: 513-520-7636
Thinking
about having
an auction?
Call one of us.
UNABLE TO ATTEND?
Bid Online in Real Time at
1. Register at www.BidSpotter.com.
2. Mail a deposit check in the amount of 25% of your anticipated purchases to: Myron Bowling Auctioneers
P O Box 369 • Ross, Ohio 45061. For overnight delivery Service: 3901 Krause Ln • Hamilton, OH 45014
If You Need Assistance Call 513-738-3311.
ALL ONLINE BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM
513.738.3311 www.myronbowling.com
DIRECTIONS
LODGING
From the Greer Spartanburg Airport
(GSP), take I-85 North & go 3.4 miles to
Exit #60. Take SC101 South 13.1 miles
to North Main Street for 1.3 miles then
continue on US-221 1.2 miles. Turn right
onto Willis Road and into Parkway.
All major hotels in Greer, SC at the airport.
SIMPSONVILLE, SC:
Hampton Inn (800) 426-7866
3934 Grandview Drive 29680
Holiday Inn Express
(800) 465-4329
3821 Grandview Drive 29680
Comfort Suites (877) 424-6423
3971 Grandview Drive 29680
From I-385 East of Simpsonville, take
Exit #51 to SC101 North. Go 9.2 miles
to North Main Street then continue on
US-221 1.2 miles. Turn right onto Willis
Road and into Parkway.
TERMS & CONDITIONS
TERMS OF SALE: Copies of Terms of Sale will be posted throughout the auction
premises. Additional terms may be announced during the auction. Each item sells to the
highest bidder… As Is, Where Is, without warranties expressed or implied. We do our
best, but we cannot guarantee the accuracy of all descriptions in our auction brochures.
Bidders must take responsibility to thoroughly inspect the items on which they intend to
bid prior to the auction.
15% BUYER’S PREMIUM ONSITE • 18% BUYER’S PREMIUM ONLINE WITH BIDSPOTTER
INSPECTION THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM
REMOVAL & PAYMENT: Anyone, Rigger or Successful Bidder, using a powered vehicle must have a Certificate of Insurance. All removal begins at the conclusion of the
auction and after payment in full by either cash, wire transfer, company check (if
approved by auction company or bank guaranteed check). All checks should be made
payable to Myron Bowling Auctioneers. Taxes will be charged unless you have the proper written exemption from your state with you.
SAMPLE BANK LETTER: This bank, the (Bank Name) will guarantee payment in full to
Myron Bowling Auctioneers. This guarantee will be in effect for purchases made at the
(Name of) Auction in (City), (State) on (Month, Date).
COMPLETE TERMS AND CONDITIONS CAN BE FOUND AT
www.myronbowling.com
Call (513) 738-3311 if you have any questions.
SOUTH CAROLINA AUCTION LICENSE NUMBERS:
Myron Bowling - 003416R • Tim Pfister - 4364 • Hilco Industries - 4008

Similar documents

Online Auction - MyEquipAuctions.com

Online Auction - MyEquipAuctions.com Current-195/KVA-160 Includes Chain Sprocket Drive Feed Table, 12 ft. Length x 4 ft. Wide, Walk Over Type Ladder/Mezz

More information

Grammer Application Guide 113012 - Suburban Seats.com

Grammer Application Guide 113012 - Suburban Seats.com Please refer to the Important Notice on Page 2.

More information