Acrylic Tub Shower

Empire
Acrylic Tub Shower
59 ½" x 31" x 85 ½"
Features
• Removable front access panel
on hydrotherapy models
• Sloped lumbar support
• Built in acrylic towel bar
• Above floor rough-in
Empire
KD 53 L/R
59 ½" x 31" x 85 ½"
1511 mm x 787 mm x 2172 mm
60" Acrylic Tub Shower
Tub & Shower Features
• Vacuum formed acrylic
reinforced with fiberglass
• Scratch, stain and fade
resistant high gloss finish
• 16" deep bathing well with acrylic
towel bar and 4 large shelves
• Sloped lumbar support
• Faster Assembly with the "Snap Fit" system
KD 53 L/R • Bathtub
KD 53 L/RAW • Whirlpool
JKD 53 L/RD • Jet Air
JD 53 L/RW • Combination
Whirlpool System
• ¾ HP pre-wired self draining pump and
motor factory installed on a platform base
• 6 adjustable flow whirlpool jets
• Jets available in standard colors, polished
chrome, and brushed nickel
• Deck-mounted air switch (A/S)
• Built-in access panel
General Specifications
Average tub & shower weight
Average whirlpool weight
Average jet air weight
Average combination weight
Bathing well dimensions
at bottom
Capacity to drain overflow
Minimum operating space
Bathtub water depth from
drain to overflow
Drain opening diameter
Overflow opening Drain to floor clearance
160 lbs
73 kg
194 lbs 88 kg
170 lbs
77 kg
205 lbs
93 kg
21" x 43"
533 mm x 1092 mm
46 gallons 209 litres
29 gallons 132 litres
13"
330 mm
2"
2 ½" 2 ¾"
51 mm
64 mm
70 mm
Electrical Specifications
Whirlpool Pump/Motor
¾ HP
Jet Air Blower
7.5 AMP
8.5 AMP
120V
120V
Jet Air System
• 8.5 Amp variable speed blower on a
platform base
• 14 air jets
• Jets available in standard colors, polished
chrome, and brushed nickel
• Deck-mounted electronic touch control
pad with on/off, speed, and oscillation
control (E/C)
• Built-in access panel
Combination Whirlpool & Jet Air
• 12 air jets and 6 whirlpool jets
• Jets available in standard colors,
polished chrome, and brushed nickel
• Built-in access panel
Optional Accessories
• Mirolin Shower Door, TD 52 (Tri-Panel),
BD 52 (Bypass) are designed for the KD 53
Tub Shower
• Factory installed whirlpool heater
Meets or Exceeds the Following Specifications:
• CAN/CSA B45 Series
• CAN/ULC - S102.2 - M88 Flame Spread FRP laminate rating
• CAN/SCA - C22.2 No.218.2 - Hydromassage Standard
Mirolin Industries Corp
60 Shorncliffe Road, Toronto, ON M8Z 5K1
mirolin.comsupport@mirolin.com
T 416 231 5790
F 416 231 0929 800 MIROLIN (647 6546)
800 463 2236
NOTES:
Tub & Shower to be installed on the floor supported by the 3 feet and front
edge. Shim if required to level the tub for adequate drainage.
Important:
Dimensions of fixtures are nominal and may vary
± 6 mm (¼"). These measurements are subject to
change at Manufacturer’s discretion.
UP
C
C
R
© Copyright 2010 Mirolin Ind. The Copyright
includes all content on the document.