Body Seam Selaers Quickseal

Body Seam Selaers
Quickseal
A quality v ehicle body seam sealer/adhesiv e of f ering v ery f ast paint ov er.
Part Nº:
34501 (QSW) - white, 290ml cartridge
34502 (QSG) - grey, 290ml cartridge
34503 (QSB) - black, 290ml cartridge
83405 (QSW) White - 600ml foil pack
Features
Benefits
• No solvents
• No isocyanates
• Heavy bodied sealer
• Totally flexible
• Three sealers in one
• Does not string
• Wet/dry application
• Can be overpainted immediately
• Completely safe to use & can be spot welded through
• No slump or sag
• Will not shrink, crack or harden
• Saves inventory
• Neat application, quality finish
• Saves time
Applications
Instructions
An environmentally friendly sealer and adhesive developed for
body seam sealing. Adheres to primed, painted and bare metal,
zinc coating, aluminium, wood and most plastics.
Automotive applications are for sealing door skins, roof and
bonnet struts, wings, boot floors, flitches, front and rear panels,
suspension turrets and all butt and overlap joins. Quickseal can
also be used for adhering Body Kits.
As an adhesive for bonding metal, glass, wood, most plastics,
fiberglass, rubber, ceramics, concrete, brick and polystyrene to
themselves and one another.
N.B Etch primers must not be applied OVER the top of this
product.
1 Ensure surface is clean using KENT Acrysol or KENT
Speedy 500.
2 Apply Quick Seal as required once surface is dry.
3 Paint, if required, immediately after application. For best
results paint within 4 hours.
Hints & Tips
DS10
0094 01
Body Seam Selaers
Quickseal
Technical Information
Consistency:
Part Nº: 34501/34502/34503/83405
Smooth white paste,
medium to high viscosity
Description: Quick Seal White, Grey & Black
Tack Free:
7 - 8 mins
Shelf Life: 18 months
-Skin depth 1 Hour:
0.75mm
Selling Unit: EA
Shore A:
60
Hazard info: Non Hazardous
Initial Grab:
Good
VOC: 0g/L
Tensile Strength:
Shear strength 2.6 Mpa
290ml; White Foil Pack, 600ml
Stock Code: QSW/QSG/QSB
DIN 53504
Customs Tarif Code: 3214 10 10
Slump Test:
0.02
Pack=Each: 1
Wet on Wet:
Good
MSDS: Yes
Cure Through:
2.5mm in 24 hours at 20ºC and 50% RH
Replacing Product: N/A
Elongation:
300%
Basic Material:
MS polymer
Extrusion of Product:
Associated
Products:
Market
Segments
120 PSI Reg 0.33 up
Quickfill (QFL), Acrysol (ABS/SAB), Proseal 202 (KPS202)
Primary
Secondary
Health & Safety Information
This product is not subject to classification regulations under EC Directives
and the Ordinance on Hazardous Materials.
Safety data sheet available for professional user on request.
In order to provide you with the most appropriate Personal Protective Equipment when using our products, KENT advises that you follow
the guidelines on the packaging of the product before use. The guidelines are there for your protection and KENT provides a range of
Personal Protection Equipment such as clothing, eye glasses, goggles, face shields and breathing apparatus, complying with the latest
European legislation. If you require further advice then please phone our freephone number and we will be pleased to help you.
Telephone: 0800 136925
Terms and Conditions
No part of this publication may be reproduced,
transmitted or stored, electronically, mechanically or
photocopied without the prior permission of Barnes
Group KENT Ltd.
This data sheet and its contents (the "Information")
belong to the Barnes Group KENT Ltd or are
licensed to it. No licence is granted for the use of it
other than for information purposes in connection
with the products to which it relates. No licence of
any intellectual property rights is granted.
The Information is subject to change without notice and
replaces all data sheets previously supplied. The
Information supplied is believed to be accurate but the
Group assumes no responsibility for its accuracy or
completeness, any error from or omission in it nor for
any use made of it. Users of this data sheet should
check for themselves the Information and the suitability
of the products for their purpose and not make any
assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on
the Information or use of it (including
liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This
will not operate to limit or restrict the Group's liability for death or
personal injury resulting from its negligence KENT is the trading
name of Barnes Group KENT Ltd.
Registered Office:
36-48 Queen Street, Horsham, West Sussex RH13 5AD
Registered in England Nº: 1164516
VAT Registration Nº: 887 1228 94
All rights reserved.
KENT UK: 36 – 48 Queen Street, Horsham, West Sussex, RH13 5AD
Tel: +44 (0) 1403 213355 Fax: +44 (0) 1403 213343 www.kenteurope.com
Barnes Group KENT Ltd 2006
DS10