Samoa EquipmEnt

Transcription

Samoa EquipmEnt

PROPOSTA LOGO 04
Samoa Equipment
ABCDEFGHJKLMNOPQRSTUVYXZ!/&?
POMPE PNEUMATICHE
A DOPPIA MEMBRANA
Le Pompe pneumatiche a doppia membrana sono pompe molto versatili che
possono essere utilizzate con una vasta gamma di fluidi in più applicazioni. Samoa Directflo pompe a membrana ® offrono molteplici vantaggi
e presentano varie versioni Nelle pompe a membrana tradizionali, il lato di
ciascuna membrana umida è sull’esterno ed il lato secco è all’interno.
Ciò significa che i collettori che creano attrito e perdita di pressione,
sono necessari per la raccolta del fluido nella pompa e per il suo trasferimento. Le tradizionali pompe a membrana possono anche provocare
conseguenze negative, come un elevato consumo d’aria, flusso
altamente vibrante, provocando una manutenzione complicata, ecc
Directflo pompe ® funzionano in modo diverso. Il fluido pompato segue
un flusso rettilineo e diretto, attraverso l’interno del corpo pompa.
In questo modo, Directflo pompe ® evita di utilizzare collettori.
Le conseguenze del loro design innovativo, presentano i seguenti
vantaggi rispetto alle tradizionali pompe a flusso esterno:
•
•
•
•
•
•
•
•
•
Design compatto.
Ridotto consume di aria.
Riduzione delle pulsasioni.
Performance superiore.
Aumento della capacità di aspirazione.
Aumento della durata e delle prestazioni.
Ridotto numero di componenti di ricambio
Manutenzione estramemente semplificata
Installazione semplicissima.
Innovazioni di alto valore per il mercato le pompe Directflo® sono
progettate per essere utilizzate sia come pompe di trasferimento che
per impianti centralizzati. Possono lavorare su richiesta, e partire
subito dopo l’apertura di una valvola di mandata e fermarsi una
volta chiusa. Nella condizione di stallo, la pompa non ha perdite
d’aria, un problema comune con pompe a membrana tradizionali.
Directflo pompe ® per il trasferimento e l’aspirazione di:
•
•
•
•
•
Lubrificanti
Olio esausto
Antigelo
Lavavetri
Acqua contaminata
POMPE PNEUMATICHE A PISTONI
PUMPMASTER 2
PUMPMASTER 3
PUMPMASTER 3+3
PUMPMASTER 4
PUMPMASTER 6
Pompe ad alta capacità di
tipo pneumatico specificamente progettate per il
trasferimento di lubrificante,
kit di distribuzione e piccoli
sistemi centralizzati.
Alimentate ad aria con un
innovativa valvola brevettata. La valvola fornisce l’aria
alla pompa con un veloce
movimento alternativo che
contribuisce a migliorare le
prestazioni. Pumpmaster 2
sono disponibili con rapporti
1:1 e 3:1.
Con rapporto id pressione a
55:1 adatte per il trasporto
di grasso. Pompe progettate per i dispositivi mobili
ed unità portatili. Potente,
di grande efficacia e con
un elevato rapporto di
pressione. Adatte quando
è necessaria una grande
pressione. Le pompe adatte
per tutti i container, fusti o
cisterne.
Rapporto di pressione
60:1 pompe per il rasporto
di grasso. Molto affidabili
ed adatte per necessità di
pressione molto elevata per
le applicazioni più esigenti.
Sono affidabili pompe per
uso in sistemi che comprendono la distribuzione di linee
ed avvolgitori.
Pumpmaster 3 +3 pompe
può essere utilizzato anche
per sistemi mobili ed applicazioni portatili quando l’alta
pressione ed una portata
elevata sono necessarie.
Tipologia Heavy-Duty,
sono pompe pneumatiche
progettate per sistemi di
distribuzione di lubrificante.
La comprovata affidabilità
del sistema pneumatico
offre prestazioni pompa ad
alto profilo e rende questa
famiglia di pompe la scelta
preferita nei sistemi di
distribuzione centralizzata
di lubrificante.
Le Pumpmaster 4 sono
disponibili con rapporto
3:1 e 5:1.
Pompe ad alta prestazione ed elevate pressioni
per applicazioni con lunghe distanze di tubazioni,
freddo temperature fredde
o quando una bassa
pressione atmosferica
potrebbe limitare le
prestazioni della pompa.
Costruite per la massima
affidabilità. Pumpmaster 6
sono disponibili con rapporti di pressione 10:1 per
il lubrificante e rapporto di
55:1 per grasso.
UN SERVIZIO COMPLETO PER UN LAVORO MIGLIORE
Abbiamo la competenza per progettare e pianificare la vostra officina
partendo da zero. Il nostro team dedicato è in grado di gestire il vostro progetto relativo all’officina dall’inizio alla fine, utilizzando la più
moderna tecnologia CAD.
Nella nostra attività l’attenzione al design ed all’efficienza è prioritaria e
la nostra filosofia consiste nell’ascoltare i bisogni dei clienti e offrire loro
prodotti di altissima qualità, progettati e forniti con un livello di servizio
ineguagliato.
Abbiamo la competenza per progettare e pianificare la vostra officina
partendo da zero. Il nostro team dedicato è in grado di gestire il vostro progetto relativo all’officina dall’inizio alla fine, utilizzando la più
moderna tecnologia CAD.
Nella nostra attività l’attenzione al design ed all’efficienza è prioritaria e
la nostra filosofia consiste nell’ascoltare i bisogni dei clienti e offrire loro
prodotti di altissima qualità, progettati e forniti con un livello di servizio
ineguagliato.
03
AVVOLGITUBO
AUTOMATICI
Utilizzati in tutto il mondo, sono stati progettati per essere di qualità
migliore di quanto offerto sul mercato. L’avvolgitubo con ritorno
automatico a molla, e’ adatto ad ospitare tubi per la distribuzione di aria
compressa, olio, acqua e grasso.
Permette di sfilare rapidamente solo la lunghezza di tubo desiderata
migliorando l’operatività e la funzionalità. Il riavvolgimento del tubo e’
rapido e sicuro e permette di avere un ambiente di lavoro libero da
impedimenti e ordinato, salvaguardando l’usura e l’eventuale rottura
dei tubi stessi. Il suo corretto utilizzo può aumentare la produttività e la
messa in sicurezza dell’officina.
Equitec offre una vasta gamma di accessori di montaggio per l’installazione
di avvolgitori aperti o chiusi. Gli avvolgitori Equitec garantiscono :
¬ Portata superiore
¬ Speciale molla in acciaio resistente alla fatica garantisce
una lunga durata e funzionamento senza problemi
¬ Cricchetto per carichi pesanti
¬ Struttura in metallo e verniciata con polveri epossidiche
per una maggiore resistenza all’usura
¬ Solo tubi flessibili di alta qualità, appositamente progettati
per uso in naspi, istituito dai produttori europei
I PRODOTTI
506 SERIES
507 SERIES
1650 SERIES
7500 SERIES
508 SERIES
In alluminio e materiale
composito, completi di
tubo a braccio singolo
adatti per la distribuzione di aria, acqua, olio,
antigelo, detergenti,
acqua calda ad alta
pressione e acqua fredda
e grasso con tubo di
capacità fino a 15 m
(50 ‘) x “1/2 tubo.
Problema risolto con gli
Avvogitori Chiusi utilizzando
moderni materiali e un
unico design di progettazione. Adatti per l’uso di
bassa pressione d’aria,
acqua e lavavetri, media
pressione lubrificanti e
antigelo, ed alta pressione
di grasso ed acqua fredda
e calda. Tubo capacità fino
a 15 m (50 ‘) x tubo da 1/2’’
o 18 m (60’) con un minimo
di 3 m (10’) di tubo.
La serie Heavy Duty è
rinforzato da un doppio
piedistallo per Avvolgitubo
adatto per fluidi a bassa
pressione atmosferica,
acqua e gasolio a media
pressione e lubrificanti.
Tutta la costruzione in
metallo, può di gestire fino
a 15 m (50’) di 1/2 “tubo.
La serie Heavy Duty è
rinforzato da un doppio
piedistallo per Avvolgitubo adatto per aria
compressa, alta e bassa
pressione d’acqua, olio
di media pressione e
grasso ad alta pressione.
Tutta la costruzione
in metallo, in grado di
gestire fino a 15 m (50 ‘)
di 3/4 “tubo o 20 m
(65 ‘) di 1/2 “tubo.
Heavy Duty Avvolgitubo
costruito per la massima
durata. Adatto per bassa
pressione d’aria, acqua e
diesel e media pressione
d’acqua, lubrificanti e
diesel. Adatto anche
per il recupero di olio
esausto.
Tutto in metallo, in grado
di gestire fino a 1”di
tubo flessibile con 15
m (50’), e fino a 30 m
(100’) di 1/2” tubo.
UN PARTNER DI QUALITA’
Equitec Group offre ai propri clienti una nuova possibilità nella scelta
delle linee e attrezzature da acquistare. Per portare avanti il progetto,
Equitec ha interpellato diversi attori del mercato presentando loro la
strategia, gli obiettivi e la proposta di realizzare una linea di prodotti
innovativa e di qualità elevate, con l’invito ad andare oltre la logica dei
semplici accordi quadro, tipici del passato.
Si tratta di Samoa Industries Sa, dinamica azienda spagnola dalla grande competenza tecnica, che ha saputo formulare al meglio il rapporto
qualità-prezzo richiesto dagli standard Equitec, scelto per proporre a
condizioni esclusive un prodotto posizionato nell’alto di gamma destinato ai centri caratterizzati da ritmi di lavoro molto elevati.
Dunque, il meglio della produzione mondiale a condizioni uniche sul mercato italiano.
05
KIT DISTRIBUZIONE FLUIDI
Anche il più semplice lubrificante da distribuire o trasferire richiede più
di una sola pompa nuda. Equitec Group, offre una vasta gamaa di soluzioni
complete per la distribuzione di lubrificante e grasso.
Kit che comprendono tutti gli accessori necessari per trasferire in modo
efficiente lubrificanti, adatti per essere utilizzati con fusti da grasso di
185, 50, 20, 18 e 12,5 kg, fusti da 200 litri e 1.000 litri IBC di lubrificante.
Soluzione semplice per applicazioni semplici e comuni sia per la distribuzione fissa che per soluzioni mobili.
MOBILE GREASE UNITS FOR 12 TO 20 KG PAILS
WITH PUMPMASTER 3 PUMPS
482 200
PUMPMASTER 3 MOBILE AIR OPERATED GREASERS - SHIELDED - 20 KG
PumpMaster 3 air operated pump fixed on top of a protective shield. It can be used with any
type of grease keg up to 20 kg (44 lbs) placed inside the shield.
482 200 - PM3 mobile air operated greaser - Shielded - 20 Kg.
Includes:
• 404 100: PumpMaster 3 - 55:1 grease pump, h= 410 mm with bung adaptor.
• 480 021: Protective shield with 4 castors.
• 412 102: 2 m x Ø1/4” high pressure hose.
• 413 080: High pressure grease control gun with “Z” swivel.
482 202 - PM3 mobile air operated greaser with meter - Shielded - 20 Kg.
Similar to previous model, includes high pressure meter 411 100.
Non included options:
• 417 001: Follower plate Ø 290 - 260 mm.
• 950 220: 20 l grease container (Ø 280 x h 370 mm).
424 152
PUMPMASTER 3 MOBILE AIR OPERATED GREASERS – 12,5 TO 20 KG
424 152 - PM3 mobile air operated greaser - 20 Kg.
Includes:
• 418 002: 330 mm drum cover for 20 Kg pails.
• 741 602: Carrying handle.
• 430 000: Two wheeled trolley.
424 150 - PM3 mobile air operated greaser - 12,5 to 18 Kg.
Similar to previous model, includes 310 mm drum cover for 12,5 to 18 Kg pails.
Recommended for 35 lb pails.
• 411 100: In line grease meter for grease control gun.
424 172
PUMP MASTER 3 PORTABLE AIR OPERATED GREASERS – 12,5 TO 20 KG
424 172 - PM3 portable air operated greaser - 20 Kg.
Includes:
• 418 002: 330 mm drum cover for 20 Kg pails.
• 741 602: Carrying handle.
424 170 - PM3 portable air operated greaser - 12,5 to 18 Kg.
Similar to previous model, includes 310 mm drum cover for 12,5 to 18 Kg pails.
Recommended for 35 lb pails.
07
MOBILE GREASE UNITS FOR 50 KG DRUMS
WITH PUMPMASTER 3 PUMPS
482 500
PUMPMASTER 3 MOBILE AIR OPERATED GREASER - SHIELDED - 50 KG
PumpMaster 3 mobile air operated greasers - shielded - 50 Kg.
PumpMaster 3 air operated pump fixed on top of a protective shield. Can be used with any
type of grease keg up to 50 kg (120 lbs) placed inside the shield.
482 500 - PM3 mobile air operated greaser - Shielded - 50 Kg.
Includes:
407 200: PumpMaster 3 - 55:1 grease pump, h= 725 mm with bung adaptor.
480 050: Protective shield with 2 wheels and 2 castors.
412 103: 3 m x Ø1/4” high pressure hose.
413 080: High pressure grease control gun with “Z” swivel.
482 501 - PM3 mobile air operated greaser with meter - Shielded - 50 Kg.
417 003: Follower plate Ø 405 - 360 mm.
950 250: 50 l grease container (Ø 370 x h 635 mm).
425 150
PUMPMASTER 3 MOBILE AIR OPERATED GREASER - 50 KG
Includes:
418 004: 405 mm drum cover for 50 Kg pails.
431 000: Four wheeled trolley.
411 100 In line grease meter for grease control gun.
950 250 : 50 l grease container (Ø 370 x h 635 mm).
425 290
PUMPMASTER 3 PORTABLE AIR OPERATED GREASER - 50 KG
425 290 - PM3 portable air operated greaser - 50 Kg.
Includes:
418 004: 405 mm drum cover for 50 Kg pails.
430 000: Two wheeled trolley.
360 125: Gun holder for covers.
411 100: In line grease meter for grease control gun.
950 250: 50 l grease container (Ø 370 x h 635 mm).
WITH PUMPMASTER 3 PUMPS.
428 243
PUMPMASTER 3 MOBILE AIR OPERATED GREASER - 180 KG
Includes:
• 418 006: 610 mm drum cover for 180 Kg drums.
• 417 004: 590 - 550 mm follower plate for 180 Kg drums.
• 432 000: 180 Kg drum trolley.
428 200
PUMPMASTER 3 MOBILE AIR OPERATED GREASER WITH HOSE REEL - 180 KG
428 200 - PM3 mobile air operated greaser with hose reel - 180 Kg.
Includes:
• 412 190: 1,5 m x Ø1/4” high pressure hose.
• 501 300: Open type hose reel with 10 m x 1/4” hose.
• 432 814: 180 Kg drum heavy duty trolley.
• 360 113: Hose reel bracket for trolley 432 814.
07
MOBILE GREASE UNITS
WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG.
486 201
PUMPMASTER 3+3 MOBILE AIR OPERATED GREASERS – SHIELDED – 20 KG
PumpMaster 3+3 air operated pump fixed on top of a protective shield. It can be used with
any type of grease keg up to 20 kg (44 lbs) placed inside the shield.
486 200 - PM3+3 mobile air operated greaser - Shielded - 20 Kg.
Includes:
• 402 050: PumpMaster 3+3 - 55:1 grease pump, h= 410 mm with bung adaptor.
• 480 021: Protective shield with 4 castors.
• 945 591: 3/8” BSP (M) x 1/4” BSP (M) connection adapter.
486 201 - PM3+3 mobile air operated greaser with meter - Shielded - 20 Kg.
486 501
PUMPMASTER 3+3 MOBILE AIR OPERATED GREASERS - SHIELDED - 50 KG
PumpMaster 3+3 air operated pump fixed on top of a protective shield. It can be used with
any type of 50 Kg grease drum.
486 500 - PM3+3 mobile air operated greaser - Shielded - 50 Kg.
Includes:
• 480 050: Protective shield with 2 wheels and 2 castors.
486 501 - PM3+3 mobile air operated greaser with meter - Shielded - 50 Kg.
• 411 100: In line grease meter for grease control handle.
WITH PUMPMASTER 3+3 PUMPS
426 243
PUMPMASTER 3+3 MOBILE AIR OPERATED GREASER - 180 KG
426 243 - PM3+3 mobile air operated greaser - 180 Kg.
Includes:
• 432 000: 180 Kg drum trolley.
426 200
PUMPMASTER 3+3 MOBILE AIR OPERATED GREASER WITH HOSE REEL - 180 KG
426 200 - PM3+3 mobile air operated greaser with hose reel - 180 Kg.
Includes:
• 412 392: 1,5 m x Ø3/8” high pressure hose.
• 432 814: 180 Kg drum heavy duty trolley.
• 360 113: Hose reel bracket for trolley 432 814.
07
SELF CONTAINED OIL DISPENSERS - 25 L
324 000
PRESSURIZED LUBRICANT DISPENSER - 25 L
Mobile unit for dispensing viscous lubricants, with 25 l (6.6 gallons) steel container and level
gauge. The unit must be pressurized using a tyre inflator (max pressure 7 bar - 100 psi,
safety valve included). Supplied with a 1.5 m delivery hose and oil control gun with flexible
outlet and manual non-drip nozzle.
324 000 - Pressurized lubricant dispenser - 25 l.
324 010 - Pressurized lubricant dispenser with hose end meter.
325 000
HAND OPERATED LUBRICANT DISPENSERS - 25 L
325 010 - Hand operated lubricant dispenser with meter - 25 l.
Self contained unit with a 25 l (6.6 gallons) container with level gauge. Unit includes a lever
action pump, oil meter with digital register at the pump outlet and 1.5 m delivery hose with
valve and 135º angled nozzle.
325 000 - Hand operated lubricant dispenser.
Same as model 325 010, without meter.
327 020
AIR OPERATED LUBRICANT DISPENSERS - 25 L
327 020 - Air operated lubricant dispenser with meter - 25 l.
Self contained unit with a 25 l (6.6 gallons) container with level gauge. Unit includes an air
operated 2:1 pressure ratio pump, specially designed for dispensing high viscosity
lubricants. Oil meter with digital register at the pump outlet and 1.5 m delivery hose with oil
control gun with 110º angled outlet with manual non drip nozzle.
SELF CONTAINED OIL DISPENSERS - 70 L
AND MOBILE UNITS FOR 60 L DRUMS
326 000
HAND OPERATED LUBRICANT DISPENSERS - 70 L
326 010 - Hand operated lubricant dispenser with meter - 70 l.
Self contained unit with a 70 l (17 gallons) container with level gauge. Unit includes a lever
action pump, oil meter with digital register at the pump outlet and 1.5 m delivery hose with
valve and 135º angled nozzle.
326 000 - Hand operated lubricant dispenser - 70 l.
Same as model 325 010, without meter.
328 010
AIR OPERATED LUBRICANT DISPENSERS - 70 L
328 010 - Air operated lubricant dispenser with meter
Self contained unit with a 70 l (17 gallons) container with level gauge. Unit includes an air
operated 3:1 pressure ratio pump for dispensing all types of lubricants, 3 m delivery hose
and hose end meter with semi automatic non drip nozzle.
370 400
MOBILE OIL DISPENSERS FOR 60 L DRUMS
370 400 - Mobile oil dispenser for 60 l drums with hose end meter
Includes:
• 358 100: 3:1 pressure ratio oil pump.
• 418 010: 405 mm drum cover with two bung openings.
• 362 103: 3 m oil hose.
• 431 000: 4 wheeled drum trolley for 50 l (16 gallons) drums.
• 365 603: Hose end meter.
370 500 - Mobile oil dispenser for 60 l drums
Same as model 370 400 but with a non metered oil control gun.
07
MOBILE UNITS FOR 200 L DRUMS
378 115
MOBILE OIL DISPENSERS FOR 200 L DRUMS WITH HOSE REEL
378 110 - Mobile oil dispensers for 200 l drums with hose reel
The pump mounted on the trolley makes replacing the drum when empty easier.
Includes:
• 360 102: Wall pump bracket.
• 367 011: Suction hose for 200 l drums.
• 502 200: 8 m x 1/2” enclosed hose reel.
• 360 113: Hose reel bracket for trolleys.
• 365 603: Hose end meter with semi automatic non drip nozzle.
• 432 814: 200 l drum heavy duty trolley.
378 115 - Mobile oil dispensers for 200 l drums with hose reel and preset meter
Same as model 378 110, includes a preset meter (600 021) instead of the hose end meter 365 603.
376 610
MOBILE OIL DISPENSERS FOR 200 L DRUMS
376 610 - Mobile oil dispensers for 200 l drums
The pump mounted on the trolley makes replacing the drum when empty easier.
Includes:
• 360 102: Wall pump bracket.
• 367 011: Suction hose for 200 l drums.
• 362 103: 3 m x 1/2” oil hose .
• 432 814: 200 l drum heavy duty trolley.
376 615 - Mobile oil dispensers for 200 l drums with preset meter
376 300
MOBILE OIL DISPENSERS FOR 200 L DRUMS WITH LONG PUMP
376 300 - Mobile oil dispensers for 200 l drums
Includes:
• 354 100: 3:1 pressure ratio oil pump for 200 l drums.
• 362 103: 3 m x 1/2” oil hose.
• 432 000: 200 l drum trolley.
376 301 - Mobile oil dispensers for 200 l drums with preset meter
DRUM TROLLEYS
432 814
HEAVY DUTY TROLLEY FOR 185 KG (440 LB) DRUMS
432 814 - 185 Kg drum heavy duty trolley
Heavy duty trolley with two Ø 260 mm tyres and one solid rubber swivelling wheel with
brake. Includes an adjustable chain for securing the drum and a bracket mounted on the
handle for fixing an air perated pump (requieres bracket 360 102). A hose reel can also be
mounted using optional bracket (360 113).
360 113 - Hose reel bracket for trolley 432 814
432 000
TROLLEY FOR 185 KG (440 LB) DRUMS
432 000 - 185 Kg drum heavy duty trolley
Trolley with two solid rubber wheels and one rubber swivelling wheel with brake.
A hose reel or a pump can be mounted using optional brackets.
360 134 - Pump bracket for trolley 360 134
(Requires wall bracket 306 102 for fixing an air operated pump).
360 135 - Hose reel bracket for trolley 360 135
431 000
TROLLEY FOR 50 KG (120 LB) DRUMS
431 000 - Trolley for 50 Kg drums
Four wheeled trolley with tubular frame for 50 and 20 Kg drums. The drum is fixed to the
trolley with two height adjustable hooks.
430 000
TROLLEY FOR 20 KG (44 LB) PAILS
430 000 - Trolley for 20 Kg pails
Two wheeled trolley with tubular frame for 50 and 20 Kg drums. The drum is fixed to the
trolley with one height adjustable hook.
07
DRUM TROLLEYS
360 130
PUMP HOLDER FOR TROLLEYS
360 130 - Pump holder for trolleys
For use with trolleys 431 000 and 430 000 when a pump cannot be fitted directly onto the
drum. With 2” BSP (F) opening.
485 120
DRUM DOLLIES
485 120 - Adjustable drum dolly - 205 l
Dolly for drums with diameter Ø 400 - 600 mm, with three adjustable drum attachments and
three swivel castors (Ø 75 mm), one of them with brake.
485 000 - Drum dolly - 50 l
Dolly for 50 l drums, with three adjustable drum attachments and four swivel castors (Ø 60 mm).
480 050
MOBILE PROTECTIVE DRUM SHIELDS
480 050 - Mobile protective drum shield - 50 l
480 021 - Mobile protective drum shield - 20 l
PUMP PACKAGES
428 262
PUMP MASTER 3 - 55:1 EQUIPPED PUMP
428 262 - PumpMaster 3 - 55:1 equipped pump for 185 Kg drums.
Assembly for high pressure greasing with a PumpMaster 3 - 55:1 pressure ratio pump for
185 Kg drums.
Includes:
• 412 104: 4 m x Ø 1/4” high pressure hose.
• 360 125: Grease control gun holder.
453 000
PUMPMASTER 3 - 55:1 EQUIPPED PUMP + HOSE REEL
453 000 - PumpMaster 3 - 55:1 equipped pump and 10 m hose reel for 185 Kg drums.
Assembly for high pressure greasing with a Pump Master 3 - 55:1 pressure ratio pump for
185 Kg drums.
Includes:
• 429 000: Pump Master 3 - 55:1 grease pump kit for 185 Kg drums.
• 501 300: 10 m x Ø1/4” open type hose reel.
453 002 - PumpMaster 3 - 55:1 equipped pump and 15 m hose reel for 185 Kg drums.
Similar to model 453 000, includes open type hose reel 504 300 with 15 m x 1/4” hose.
• 360 111: Hose reel pivoting bracket.
• 360 127: Control gun holder and drip holster.
07
PUMPMASTER 3+3 GREASE PUMP PACKAGES
426 262
PUMP MASTER 3+3 - 55:1 EQUIPPED PUMP
426 262 - PumpMaster 3+3 - 55:1 equipped pump for 185 Kg drums.
Assembly for high pressure greasing with a PumpMaster 3+3 - 55:1 pressure ratio pump for
185 Kg drums.
Includes:
• 412 104: 4 m x Ø 1/4” high pressure hose.
• 360 125: Grease control gun holder.
• 945 591: M 3/8” BSP (M) - 1/4” BSP (M) connection adaptor.
453 602
PUMPMASTER 3+3 - 55:1 EQUIPPED PUMP + HOSE REEL
453 602 - PumpMaster 3+3 - 55:1 equipped pump and 15 m hose reel for 185 Kg drums.
Assembly for high pressure greasing with a PumpMaster 3+3 - 55:1 pressure ratio pump for
185 Kg drums. Package includes a 3/8” hose reel for higher delivery.
Includes:
• 429 800: PumpMaster 3+3 - 55:1 grease pump kit for 185 Kg drums.
• 504 301: 15 m x 3/8” open type hose reel.
• 411 100: In line grease meter for grease control handle.
• 360 127: Control gun holder and drip gun.
PUMPMASTER 2 OIL PUMP PACKAGES
452 002
1:1 OIL PUMP TRANSFER PACKAGE FOR 200 L DRUMS
454 002 - 1:1 oil transfer pump package for 200 L drums
Low pressure air operated pump for transferring lubricants from 200 l drums through a 3 m
oil hose. Approximate delivery at 7 bar (100 psi) pressure with motor oil: 30 l/min (7.8 gpm).
Includes:
• 352 100: 1:1 oil pump for 200 l drums.
• 950 302: Needle air valve, 1/4” BSP (FF).
• 239 000: 1/4” BSP (MM) connection adaptor.
• 362 303: 3 m x Ø 3/4” oil hose.
• 361 000: High delivery nozzle.
454 112
3:1 OIL PUMP PACKAGES FOR 200 L DRUMS
454 110 - 3:1 oil dispensing pump with meter
Medium pressure air operated pump with hose end meter for dispensing all type of
lubricants from 200 l drums through a 3 m oil hose. Approximate delivery at 7 bar (100 psi)
pressure with motor oil: 8 l/min (2.1 gpm).
Includes:
• 354 100: 3:1 oil pump for 200 l drums.
• 362 103: 3 m x Ø 1/2” oil hose.
• 365 603: Hose end meter with semiautomatic non drip nozzle.
454 112 - 3:1 oil dispensing pump with preset meter
Similar to model 454 110, includes a preset meter 600 021 instead of the hose end meter
365 603.
454 111 - 3:1 oil dispensing pump
Similar to model 454 110, includes a non-metered oil control gun 363 078 instead of the
hose end meter 365 603.
454 100
OIL DISPENSING PUMP
454 100 - Oil dispensing pump with outlet valve
Special 2:1 pressure ratio air operated pump with an outlet spigot for dispensing lubricants
from 200 l drums.
Includes:
• 735 800: 2:1 pressure ratio pump.
• 368 108: Suction tube for 200 l drums.
• 736 462: Oil tray with 2” BSP (M) bung adaptor.
• 361 100: Oil spigot valve.
07
PUMPMASTER 2 OIL PUMP AND
HOSE REEL PACKAGES
454 600
DRUM MOUNTED 3:1 OIL PUMP AND HOSE REEL PACKAGES
454 600 - Drum mounted 3:1 oil pump with hose reel and hose end meter
Complete package for 200 l drums. Includes all accessories required for installation and
connection to the compressed air supply.
Includes:
• 379 300: 3:1 pump kit for 200 l drums.
•365 603: Hose end meter with semiautomatic non drip nozzle.
454 601 - 3:1 oil dispensing pump with hose reel and preset meter
Similar to model 454 600, includes a preset meter 600 021 instead of the hose end meter 365 603.
• 360 127: Control gun holder and drip holster.
454 673
WALL MOUNTED 3:1 OIL PUMP AND OPEN TYPE HOSE REEL PACKAGES
454 653 - Wall mounted 3:1 oil pump with open type hose reel and hose end meter
Includes:
• 379 000: Wall mounted 3:1 pump kit for 200 l drums.
• 360 127: Oil gun holder and drip holster.
454 673 - 3:1 oil dispensing pump with open type hose reel and preset meter
454 659
WALL MOUNTED 3:1 OIL PUMP AND ENCLOSED TYPE HOSE REEL PACKAGES
454 659 - Wall mounted 3:1 oil pump with enclosed type hose reel and hose end meter
Includes:
• 379 000: Wall mounted 3:1 pump kit for 200 l drums.
• 502 200: Enclosed type hose reel with 8 m x 1/2” hose.
• 360 127: Oil gun holder and drip holster.
454 679 - 3:1 oil dispensing pump with enclosed type hose reel and preset meter
LUBRICATION BENCHES
450 000
LUBRICATION WORKBENCH SYSTEM - 2 X 205 L DRUMS
450 000 - Two drums lubrication bench
Ready to use unit, with no need of installation work as all components are factory mounted.
Compact design, can store two 205 l drums. The unit can be placed in an existing service
bay. Easy transportation to a new location without dismounting the unit. It has a metal
worktop to be used as a workbench. As an option, a tool cabinet with lockable shuffer can
be included.
The system includes two 3:1 pressure ratio air operated oil pumps, two enclosed hose reels
with 8 m. hose and electronic hose end meter and two air distribution hoses with quick
couplers and tyre gauge and blow gun.
450 012 - Two drums lubrication bench with preset meters
Similar to model 454 000, includes two preset meters 600 021 instead of the hose end
meters 365 603.
Option:
• 281 501: Tool cabinet.
With locking shutter, tool hanging accessories and three shelves.
450 010
LUBRICATION WORKBENCH SYSTEMS - 205 L DRUMS
450 010 - One drum lubrication bench
Similar to model 450 000, with capacity for one 205 l drum. The unit includes one 3:1
pressure ratio air operated oil pump, one enclosed hose reel with 8 m hose and electronic
hose end meter and one air distribution hoses with quick couplers and blow gun.
450 013 - One drum lubrication bench with preset meter
Similar to model 454 000, includes one preset meter 600 021 instead of the hose end
meter 365 603.
07
PUMP MASTER 2 OIL PUMP
PACKAGES FOR 1000 L IBCs
454 150
3:1 OIL PUMP PACKAGE FOR 1000 L IBCS
454 150 - 3:1 oil pump and meter package for 1000 l IBCs
3:1 oil pump equipped with 6 m oil hose and hose end meter mounted on a bracket on the
front of the IBC. The package includes a suction hose to fit the IBC lower outlet.
Includes:
• 353 110: 3:1 oil pump.
• 360 108: Bracket for IBC.
• 745 303: Suction hose with adaptor for connecting to the IBC lower outlet.
• 362 106: 6 m x 1/2” oil hose.
• 360 102: Pump bracket.
454 155 - 3:1 oil pump and preset meter package for 1000 l IBCs
Similar to model 454 070, includes preset hose end meter 600 021 instead of hose end
meter 365 603.
454 073 / 454 697
3:1 OIL PUMP AND HOSE REEL PACKAGE FOR 1000 L IBCS
454 695 - 3:1 oil pump, hose reel and meter package for 1.000 l IBCs, top mounted
3:1 oil pump equipped with a 10 m oil hose reel and hose end meter mounted on a bracket
on the top of the IBC. The package includes a suction hose to fit the IBC lower outlet.
Includes:
• 353 110: 3:1 oil pump.
• 360 126: Hose end meter bracket for hose reels.
454 696 - 3:1 oil pump and preset meter package for 1.000 l IBCs
meter 365 603.
454 697 - 3:1 oil pump, hose reel and meter package for 1.000 l IBCs, side mounted
3:1 oil pump equipped with a 10 m oil hose reel and hose end meter mounted on a bracket
on the front of the IBC. The package includes a suction hose to fit the IBC lower outlet.
Includes:
• 353 110: 3:1 oil pump.
• 360 126: Hose end meter bracket for hose reels.
454 698 - 3:1 oil pump and preset meter package for 1000 l IBCs
meter 365 603.
Aspiratori e Recuperatori
carrellati per olio esausto
Gli Oli esausti sono un pericolo per l’ambiente e devono essere raccolti e
conservati correttamente. Equitec offre una vasta gamma di opzioni per
l’efficiente raccolta dell’olio esausto tramite unità mobili.
Disponibile con serbatoi da 25 fino 120 litri, con varie opzioni per lo
scarico una volta pieno il serbatoio di accumulo. Le unità mobili d’aspirazione,
sono dotate di pompa con effetto venturi, azionato ad aria, offrono una
soluzione economica ed efficiente per l’estrazione di oli usati direttamente dal motore del veicolo tramite un comodo connettore.
Sono disponibili anche unità che combinano l’aspirazione a soluzioni a
gravità per l’utilizzo con veicoli dove non è possibile l’aspirazione direttamente dal motore.
KIT ASIRAZIONE CENTRALIZZATA ESAUSTO
Tutti gli aspiratori e/o recuperatori possono essere facilmente svuotati in maniera centralizzata utilizzando un
kit completo di pompa a membrana tubazioni flessibili
complete di valvole ed adattatori.
Le pompe a membrana sono la scelta migliore, in grado
di gestire senza danni tutti i fluidi contaminati e/o esausti.
07
WASTE OIL GRAVITY RECEIVERS - 100 L
MOBILE WASTE OIL GRAVITY RECEIVERS - 100 L
Mobile units for gravity collection of motor oil and gear oil as well as other nonaggressive
A-III class automotive fluids. Receivers can be used under vehicle lifts and
inside lubrication pits.
Main features:
• 100 l (26 gallons) capacity, with side level gauge.
• Large tray for tools, washers, filters, etc. on top of the tank.
• One piece moulded spoiler for securing the discharge hose in pressure discharge models.
• Two reinforced castors and two reinforced wheels.
• Composite and steel telescopic collection bowl, 360º positionable oversized
extension for wider reach. Anti splash grid that can hold used filters for draining.
372 400
MOBILE WASTE OIL RECEIVERS - 100 L CAPACITY - PRESSURE DISCHARGE
372 400 - Mobile waste oil receivers - 100 l - pressure discharge
The unit is discharged through a discharge hose pressurizing the unit at 0.5 bar (3.5 psi)
with a tyre gauge. The unit includes a safety valve, for avoiding overpressure, and a 1.5 m
discharge hose.
372 200
MOBILE WASTE OIL RECEIVERS - 100 L CAPACITY - PUMP DISCHARGE
372 200 - Mobile waste oil receivers - 100 l - pump discharge
The unit is discharged with a 1:1 pressure ratio pump located at the back of the unit;
through a 1.5 m discharge hose with a dry break quick coupler.
372 300 - Mobile waste oil receivers - 100 l - remote pump discharge
The unit is discharged with a wall mounted discharge pump (not included) through a
hydraulic dry break coupler located at the bottom of the tank. Includes hydraulic coupler
(950 352).
WASTE OIL GRAVITY RECEIVERS - 70 L
MOBILE WASTE OIL GRAVITY RECEIVERS - 70 L
Mobile units for gravity collection of motor oil and gear oil as well as other nonaggressive
A-III class automotive fluids. Receivers can be used under vehicle lifts and
inside lubrication pits.
Main features:
• Cylindrical telescopic collection bowl with filter.
373 400
MOBILE WASTE OIL RECEIVERS - 70 L CAPACITY - PRESSURE DISCHARGE
373 400 - Mobile waste oil receivers - 70 l - pressure discharge
The unit is discharged through a discharge hose pressurizing the unit at 0.5 bar (3.5 psi)
with a tyre gauge. The unit includes a safety valve, for avoiding overpressure, and a 1.5 m
discharge hose.
373 200
MOBILE WASTE OIL RECEIVERS - 70 L CAPACITY - PUMP DISCHARGE
373 200 - Mobile waste oil receivers - 70 l - pump discharge
The unit is discharged with a 1:1 pressure ratio pump located at the back of the unit;
through a 1.5 m discharge hose with a dry break quick coupler.
373 300 - Mobile waste oil receivers - 70 l - remote pump discharge
The unit is discharged with a wall mounted discharge pump (not included) through a
hydraulic dry break coupler located at the bottom of the tank. Includes hydraulic coupler
(950 352).
07
WASTE OIL SUCTION UNITS - 100 L
MOBILE WASTE OIL SUCTION UNITS - 100 L
Mobile units for waste oil suction. Waste oil suction is carried out by an air operated
vacuum pump with no moving and no wear parts, using a probe or connector inserted
into the motor oil level gauge. All units include a 2.0 m suction hose with rubber
handle and a set of conectors and probes and holder 737 972.
These units can be used as autonomous units, disconnected from the air supply, once
the vacuum inside their tank is created.
The units are discharged through a 1.5 m discharge hose, pressurizing the unit at 0.5
bar (3.5 psi) with a tyre gauge. The units include a safety valve, for avoiding
overpressure.
Main features:
• Large tray for tools, washers, filters, etc. on top of the tank, with special holders for
suction connectors.
• One piece moulded spoiler for securing the discharge hose.
• High performance and low noise vacuum pump.
• Complete probes and connectors kit with holder for probes, which can be removed to clean it.
372 100
MOBILE WASTE OIL SUCTION UNIT - 100 L CAPACITY - WITH TRANSPARENT CHAMBER
372 100 - Mobile waste oil suction unit - 100 l - with transparent chamber
Includes a 10 l transparent chamber that can be used as vacuum reservoir and allows an
immediate inspection of the waste oil sucked out.
372 600
MOBILE WASTE OIL SUCTION UNIT - 100 L CAPACITY
372 600 - Mobile waste oil suction unit - 100 l
Mobile waste oil suction unit, 100 l capacity. Ideal use with all types of passenger cars,
trucks, tractors, aircrafts, boats, etc.
WASTE OIL SUCTION UNITS - 70 L
Mobile units for waste oil suction. Waste oil suction is carried out by an air operated vacuum
pump with no moving and no wear parts, using a probe or connector inserted into the
motor oil level gauge. All units include a 2.0 m suction hose with rubber handle and a set of
connectors and probes and probe holder 737 972.
These units can be used as autonomous units, disconnected from the air supply, units once
the vacuum inside their tank is created.
The units are discharged through a 1.5 m discharge hose, pressurizing the unit at 0.5 bar
(3.5 psi) with a tyre gauge. The units include a safety valve, for avoiding overpressure.
Main features:
• Complete probes and connectors kit with holderfor probes, which can be removed to clean it.
373 100
MOBILE WASTE OIL SUCTION UNIT - 70 L CAPACITY - WITH TRANSPARENT CHAMBER
Includes a 10 l transparent chamber that can be used as a vacuum reservoir and allows an
373 600
MOBILE WASTE OIL SUCTION UNIT - 70 L CAPACITY
Mobile waste oil suction unit, 70 l capacity. Ideal for use with all types of passenger cars,
trucks, tractors, aircrafts, boats, etc.
07
COMBINED WASTE OIL SUCTION AND GRAVITY
UNITS - 100 L
Mobile units that allow the collection of waste oil by gravity and by suction.
Waste oil suction is carried out by an air operated vacuum pump with no moving and
no wear parts, using a probe or connector inserted into the motor oil level gauge. All units include a 2.0 m
suction hose with rubber handle and a set of connectors and probes and probe holder 737 972. Gravity
collection is carried out using a 20 l capacity, height adjustable and oversized collection bowl with an
anti splash grid. These units can be used as autonomous units, disconnected from the air supply, once
the vacuum inside their tank is created. The units are discharged through a discharge hose,
pressurizing the unit at 0.5 bar (3.5 psi) with a tyre gauge. The units include a safety valve, for avoiding overpressure.
Main features:
• Large tray for tools, washers, filters, etc. on top of the tank, with special holders for
suction connectors.
• One piece moulded spoiler for securing the discharge hose.
• Composite and steel telescopic collection bowl, 360º positionable oversized
extension for wider reach. Anti splash grid that can hold used filters for draining.
• Complete probes and connectors kit with probe holder, which can be removed to clean.
372 000
COMBINED WASTE OIL SUCTION AND GRAVITY UNIT - 100 L CAPACITY
WITH TRANSPARENT CHAMBER
Includes a 10 l transparent chamber that can be used as vacuum reservoir and allows an
372 500
372 500 - Combined waste oil suction and gravity unit - 100 l
Mobile waste oil suction unit, 100 l capacity. Ideal use with all type of passenger cars, trucks,
tractors, etc.
COMBINED WASTE OIL SUCTION AND GRAVITY
UNITS - 70 L
COMBINED WASTE OIL SUCTION AND GRAVITY UNITS - 70 L
Mobile units that allow the collection of waste oil by gravity and by suction.
Waste oil suction is carried out by an air operated vacuum pump with no moving and no wear
parts, using a probe or connector inserted into the motor oil level gauge. All units include a
2.0 m suction hose with rubber handle and a set of connectors and probes and probe holder
737 972.
Gravity collection is carried out using a 20 l capacity, height adjustable collection bowl with filter.
These units can be used as autonomous units, disconnected from the air supply, once the
vacuum inside their tank is created.
The units are discharged through a 1.5 m discharge hose, pressurizing the unit at 0.5 bar
(3.5 psi) with a tyre gauge. The units include a safety valve, for avoiding overpressure.
Main features:
• Cylindrical telescopic collection bowl with grid.
• Complete probes and connectors kit with probe holder, which can be removed to clean.
373 000
WITH TRANSPARENT CHAMBER
373 000 - Combined waste oil suction unit and gravity - 70 l - with transparent chamber
Includes a 10 l transparent chamber that can be used as a vacuum reservoir and allows an
373 500
373 500 - Combined waste oil suction and gravity unit - 70 l
Mobile waste oil suction unit, 100 l capacity. Ideal use with all types of passenger cars,
trucks, tractors, etc.
07
WASTE OIL SUCTION UNITS
371 600
MOBILE WASTE OIL SUCTION UNIT - 24 L
Waste oil suction unit with air operated vacuum pump with no moving and no wear parts.
Can be used as an autonomous unit, disconnected from the air supply, once the vacuum
inside its tank is created. 24 l (6.3 gallons) capacity tank with side level gauge. Includes
suction probes and connectors kit (737 950) and 2 m suction hose with rubber handle.
Ideal use with cars, tractors, boats, etc.
379 700
OIL SUCTION UNITS WITH AIR OPERATED PUMP.
Stationary waste oil suction unit with air operated piston pump. The unit is installed at
the service bay and enables the cleanest method of waste oil collection.
An air operated piston pump sucks out the waste oil and transfers it directly to a remote
storage tank. Waste oil is sucked out through a probe or connector inserted in place of
the oil dip stick.
Minimum air pressure required: 6 bar.
Unit includes 3/8” x 4 m. suction hose and 1/2” x 1.5 m oil discharge hose, complete
with a set of suction connectors and probes and probe holder (737 972) and air valve for
adjusting the pump speed.
379 700 - Stationary waste oil unit with pedestal
379 701 - Wall mounted stationary waste oil unit
CONTACT SAMOA LTD FOR FURTHER WASTE OIL SYSTEMS.
SPECIAL WASTE OIL GRAVITY RECEIVERS
439 100
PIT ROLLING DRAINER
439 100 - Pit rolling drainer - 95 L
Rolling drainer for installation between pits rails with minimum / maximum width 1040 / 1450 mm.
95 l (25 gallons) capacity. Unit includes ant-splash grid, four vertical and four horizontal rollers for
easy rolling and outlet with ball valve (1 1/4” BSP (F)). Allows the connection of a dry break
hydraulic connector 950 352 and connection adaptors 945 513 + 945 551 for discharge , once full,
with a discharge pump kit.
435 000 / 436 000
LOW LEVER MOBILE DRAINERS
Low level mobile drainers for gravity collection of waste oil and used automotive fluids such
as antifreeze solutions. Recommended to use when a lift or a service pit is not available.
Gravity discharge through a drain valve or using a discharge pump kit through a dry break
hydraulic connector 950 352 (not included).
435 000 - Low level mobile drainer - 20 l
20 l (5.2 gallons) unit for use with passenger cars and small vans. Dimensions:
770 x 470 x 130 mm.
436 000 - Low level mobile drainer - 95 l
95 l (25 gallons) unit for use with passenger cars, vans, tractors, commercial vehicles, etc.
Dimensions: 1250 x 610 x 260 mm.
436 100
COOLANT FLUID RECOVERY UNIT
436 100 - Coolant fluid recovery unit
95 l low level waste oil drainer 436 000 equipped with a diaphragm pump, 1.5 m hose
and control gun. The unit allows the draining of the coolant circuit of a vehicle without the
use of a pit or lift. Thanks to the pump, it is possible to reuse the coolant fluid once the
circuit has been repaired.
Recommended use with industrial vehicles, construction machinery and agricultural
vehicles.
07
WASTE OIL EVACUATION PUMP KITS
AND ACCESSORIES
379 100
WASTE OIL EVACUATION PUMP KITS
Wall mounted pump kits to discharge waste oil drainers through a dry break hydraulic
connector. All kits include wall bracket, air connection hose with quick coupler and
connector, 1.5 m oil discharge hose and 1.5 m suction hose with dry break hydraulic
coupling to fit connector 950 352.
379 100 - 1:1 waste oil discharge pump kit
Includes a 1:1 pressure ratio wall mounted pump.
559 000 - Waste oil discharge diaphragm pump kit
Includes a 3/8” diaphragm pump 550 000.
559 100 - Waste oil discharge diaphragm pump kit - high delivery
Includes a 1” diaphragm pump 551 000.
950 352 / 950 353
ACCESSORIES FOR WASTE OIL EVACUATION KITS
950 352 - Dry Break hydraulic connector - 3/4” BSP (F)
950 353 - Dry Break hydraulic coupler - 3/4” BSP (F)
945 551 - 3/4” BSP (MM) connection adaptor
945 513 - 1 1/4” BSP (M) - 3/4” BSP (F) connection adaptor
WASTE OIL SUCTION PROBES AND CONNECTORS
Suction probes
PART NO.
TYPE
DIAMETER
LENGTH
737 952
Flexible
6 x 4 mm
700 mm
737 953
737 954
Flexible
8 x 6 mm
700 mm
Metallic
5 x 4 mm
700 mm
737 955
Metallic
6 x 5 mm
700 mm
737 949
Flexible
7 x 5 mm
1.000 mm
737 958
Flexible
6 x 4 mm
1.200 mm
737 959
Flexible
8 x 6 mm
1.200 mm
737 946
Flexible
8 x 6 mm
1.700 mm
Connection adaptors
All suction hoses used in Samoa equipment are fitted with a special connector to fit into
Mercedes Benz vehicles. For other vehicles use the following connectors.
737 947 - VAG vehicles connector
737 948 - PSA vehicles connector
Connectors and probes kits
737 950 - Suction connectors and probes kit
Includes probes 737 952, 737 953, 737 954, 737 955 and 737 949 and connectors 737 947
and 737 946.
737 972 - Suction connectors and probes kit with probes holder
Includes the same probes and connectors as kit 737 950 plus a probe holder.
ACCESSORIES AND FILTER PRESS
743 305
WASTE OIL COLLECTION BOWLS
Waste oil collection bowls with telescopic tube. Bung adaptor with 2” BSP (M) thread for
fitting to 60 and 200 l drums with a 2” bung opening or to a bung opening of a drum cover.
743 305 - 20 l cylindrical bowl
20 l capacity collection bowl - Ø 440 mm
Accesories:
• 432 000: trolley for 200 l drums
• 431 000: 4 wheels trolley for 50 l drums
432 000 / 431 000
DRUM TROLLEYS
432 000 - 185 kg drum trolley
Trolley with two solid rubber whells and one rubber swivelling whell with brake.
431 000 - 50 kg drum trolley
Four wheels trolley with tubular frame for 50 kg and 20 kg drums.
392 000
FILTER PRESS
392 000 - Filter press
Press for compacting all kind of filters (oil, fuel, etc.) from vehicles and machines and cans.
Volume of disposed elements can be reduced up to 80% and it helps to eliminate
contaminant fluids in filters.
Main features:
· 230 / 400 V three phase motor.
· 2 kW hydraulic pump.
· 12 Tons press.
· Maximum filter / can height: 340 mm.
· Safety interlocks - press will not operate before the filter chamber is closed.
· Time for pressing a 340 mm. filter: 30 seconds.
· Dimensions: 350 x 620 x 1800 mm.
07
PISTOLE PER LA DISTRIBUZIONE
DI FLUIDI
Le pistole ed i contalitri per la distribuzione di lubrificante sono proI contalitri con display digitale, alimentati a batterie, forniscono una
gettate per durare nelle più difficili condizioni di lavoro. Forniscono un
precisione superiore alla norma, grazie alla facile taratura e sono
controllo accurato e preciso dell’erogazione di tutti i fluidi di servizio,
consigliati per applicazioni in interni.
come i lubrificanti, il grasso, lavavetri ed antigelo.
I contalitri con sistema meccanico possono stare negli ambienti più
I contalitri possono includere un sistema meccanico o un ampio display
esigenti e sono raccomandati per applicazioni all’esterno.
elettronico digitale.
PISTOLE PER IL GRASSO
1177
CON CONTALITRI
413 077
SENZA CONTALITRI
Pistola per distribuzione
grasso con contalitri e
Z-Swivel
Pistola distribuzione
grasso.
PISTOLE PER LUBRIFICANTE
2162
1547
2199
Pistola completa con
contalitri digitale
con contalitri
meccanico
contalitri digitale e
preselezione
1173
186 300
Pistola con tubo
flessibile e valvola
a 90°
Pistola con tubo
flessibile diritto
5
8
3
1
6
4
2
PROPOSTA LOGO 04
7
ABCDEFGHJKLMNOPQR
01
QUADRO COMANDI GENERALE
05
LINEA DI FLUIDI
02
TASTIERA DI POSTAZIONE
06
TASTIERA DI COMANDO REMOTO
03
ELETTROVALVOLE CON DISPLAY CONTALITRI
07
CONVERTITORE DATI
04
ELETTROVALVOLE GENERALI DI LINEA
08
QUADRO COMANDO CISTERNE E POMPE
FLUID MANAGEMENT
SYSTEM
Fluid management system, nel mercato odierno dei Service pone nuove
sfide. La dimensioni dei service aumenta ed una corretta ed un miglior
controllo nella gestione dell’erogazione dei fluidi, diventa sempre più
importante rispetto ai vecchi sistemi di gestione. Inoltre, l’aumento del
costo dei lubrificanti odierni e la popolarità di lubrificanti sintetici crea
una maggiore domanda ed un’adeguata gestione contabile dei lubrificanti e del loro utilizzo. Equitec è orgogliosa di guidare il mercato con
comprovati sistemi e la scelta di soluzioni più ampia che offre il mercato
per la gestione centralizzata computerizzata dei fluidi.
Dalla semplice centralina elettronica di gestione continua del livello dei
serbatoi a più sofisticati Sistemi Wireless, una nuova tecnologia che
riduce i costi di istallazione e migliora l’efficienza.
Installarlo è rapido e semplice, imparare ad utilizzarlo e gestirlo è facile
grazie anche al potente ed intuitivo Software di gestione. La chiave di
questo risultato sta nella sua espandibilità senza necessità di complicate operazioni e costose.
FMS, consente di gestire l’erogazione controllata dei lubrificanti e l’allineamento al gestionale della vostra azienda, potendo inserire il numero
d’ordine, aspetti tecnici dell’intervento, numero di targa del veicolo, data
ed ora, ed altri dati necessari. Compresa nella gestione, troverete tutti
i sistemi di sicurezza per evitare erronee ed accidentali erogazioni o
perdite di lubrificante.
Pistole wireless o con contalitri digitali collegati ad elettrovalvole, possono essere connesse in rete e collegati a PC per controllare infinite
erogazioni.
Tutti i sistemi di monitoraggio avanzato sono stati già installati in diverse migliaia di impianti tutto il mondo. Equitec ha creato un sistema
progettato per migliorare la redditività attraverso un miglior controllo
della distribuzione del fluido. Facilmente integrabili ed espandibili permettono di progettare e sviluppare qualsiasi dimensione d’installazione,
adattabili a partire da un unico punto di erogazione fino ad oltre 100
punti di erogazione. Questa modularità permette anche l’integrazione
dei funzioni complementari, come i display remoti, archivi fotografici di
livello, rivelatori volumetrici sonde di misura, punti di accesso di controllo e la programmazione automatica di una esigenza.
MATRIX WIRELESS SYSTEM
Matrix Fluid Management, sistema di monitoraggio per il rilevamento ed
il monitoraggio dello stato dell’arte per completare il controllo dei Lubrificanti. Risparmiare tempo, guadagnare ore fatturabili e massimizzare
la redditività dell’operazione.
Il sistema prevede un software di gestione, ricetrasmettitori, contalitri
Matrix, controllo elettronico della pompa d’erogazione e Monitor del livello serbatoio (TLM). Insieme, questi componenti in modalità wireless
comunicano tra loro attraverso un segnale RF per raccogliere dati del
fluido erogato, dei livelli di olio nei fusti o nelle cisterne e del serbatoio
di olio esausto, oltre a molto di più!
•
•
•
•
•
Sistema Wireless per la trasmissione e ricezione di informazioni
rendono semplice il monitoraggio dell’attività del tuo impianto
Software Personalizzato per adattarsi perfettamente alle dimensioni della tua officina
Multi-livello di sicurezza per proteggere il vostro patrimonio,
Precisa misurazione e controllo dei fluidi, assicura profitti e migliora la gestione del magazzino;
L’interfaccia del Matrix offre sicurezza, affidabilità, ed il trasferimento di dati tra il database di Matrix e il software di gestione
della concessionaria
11
ARMADI TECNICI
Sistemi integrati per la gestione dei fluidi e lo smaltimento dei rifiuti,
progettati per soddisfare le esigenze degli utenti professionali.
Equitec Group è in grado di creare il miglior ambiente di lavoro per le
attività professionali. Organizzazione, pulizia ed efficienza sono di serie.
Questi sono fattori essenziali per il vostro successo, e contribuiscono a
promuovere la vostra immagine ai vostri clienti.
KFZ FLUID MANAGEMENT 0160
Struttura in lamiera verniciata completa di avvolgitori per la
distribuzione di fluidi e recupero dell’esausto direttamente dalla vettura.
Completo di avvolgitori per luce ed aria compressa.
360160
Disegnato e progettato per la distribuzione fino a 6
fluidi, capace di contenere da 4 a 6 avvolgitori sia
chiusi che aperti. Consigliati particolarmente per
l’utilizzo simultaneo in più postazioni di lavoro.
13
800 189 470
service24@equitec.it
ASSISTENZA
POST VENDITA
La nostra assistenza ha un’organizzazione assolutamente di prim’ordine. Equitec Group, dispone di un’attrezzatissima officina in grado di
eseguire in tempi rapidi la manutenzione e l’eventuale riparazione di
tutte le attrezzature.
E’ inoltre possibile l’intervento diretto dei tecnici presso la clientela con
l’eventuale consegna dell’attrezzatura in sostituzione.
Service 24h
L’Assistenza firmata Equitec
L’impegno di Equitec Group è garantire un immediato e costante contatto con il Cliente, assicurare un rapido intervento e riparare le attrezzature preferibilmente nel luogo del fermo nel più breve tempo possibile.
Equitec Service 24h rappresenta il servizio d’assistenza in tutta Italia
del marchio Equitec Group, garantendo assistenza su tutti gli interventi di manutenzione ordinaria e straordinaria.
I tecnici specializzati rappresentano una figura chiave nella relazione
con il Cliente, per questo motivo i tecnici del Service 24h partecipano
ad un percorso formativo, dedicato ed articolato.
Un Numero Verde 800 189 470 uguale in tutta Europa e chiamate
gestite centralmente da personale specializzato a vostra disposizione per ogni necessità.
PROPOSTA LOGO 04
noi ci mettiamo il cuore
Equitec Group Srl.
Via delle Case Rosse, 23 – Stabile C
00131 – Roma (Italia)
Tel (+39) 06 41230383
Fax (+39) 06 4192064
info@equitec.it
www.equitec.it

Samoa EquipmEnt

Transcription

Similar documents

TVIAI!II\|E EBEFIV!GESi - Devall Towing and Boat Service, Inc.

PEJABAT DAN STOR KASTAM MELAKA

Lift Station Commander

No Thanks just let me get a Catalog

Kristal - CTR Srl

Parts Catalog – 2007 – Kubota Engine – Long Cylinder

c - SIMBI

PIATTAFORME AEREE SEMOVENTI

Volatile constituents and oxidative stability of

dosing pumps - NOVA ROTORS s.r.l.

All the professional expertise and vast organic foods

The New York Public Library Music Division