FOKKER Kit and Parts Price List

FOKKER
Kit and Parts Price List
See Our Fokker D.VII develop here
Fokker-Team-Schorndorf
Achim Sven Engels
Schillerstrasse 22/4
73547 Lorch – Germany
engels@fokker-team-schorndorf.de
Note:
Any order requires a 50% payment up front.
The rest + postage is due upon completion of your parts.
The 50 % payment is not refundable in case you decide not to take the parts
when completed.
A.) Aircraft Components
Rudder
Fokker D.VII
Rudder Kit
Price: € 1,000.00 + postage
All parts of this kit are pre-manufactured.
This means that ribs do come welded and
all parts are bent and ready for final
assembly.
Fokker D.VII
Rudder Complete
Price: € 1,400.00 + postage
The complete welding job is done here and
the ruder completely fitted together.
Not included are the wooden filling pieces
that hold the area around the hinges clear
of fabric when covered.
Rudder complete, covered and
doped
Price: € 1,800.00 + postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The rudder is completed, the frame painted
and the fabric cover attached and doped. No
markings are painted onto the fabric cover.
For the covering we use printed five colour
“lozenge” linen fabric from Ross Walton.
Stabilizer
Stabilizer Kit
Price: € 800.00 + postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
All parts of this kit are pre-manufactured.
This means that ribs do come welded and
all parts are bent and ready for final
assembly.
Stabilizer complete
Price: € 1,100.00 + postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The complete welding job is done here and
the Stabilizer is completely fitted together.
Not included are the wooden rear stringers
which serve to hold the fabric.
Stabilizer complete, painted and
covered
Price: € 1,300.00 + postage
No image available so far.
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The stabilizer is completed, the frame
painted and the fabric cover attached and
doped. No markings are painted onto the
fabric cover.
For the covering we e printed five color
“lozenge” linen fabric. Dark day on top and
light day on the under surface
Elevator
Elevator Kit
Price: € 1,200.00 + postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
All parts of this kit are pre-manufactured.
This means that ribs do come welded and
all parts are bent and ready for final
assembly.
Elevator complete
Price: € 1,500.00 + postage
No image available so far.
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The complete welding job is done here and
the Stabilizer is completely fitted together.
Not included are the wooden rear stringers
which serve to hold the fabric.
Elevator complete, painted and
covered
No image available so far.
Price: € 1,700.00 + postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The stabilizer is completed, the frame
painted and the fabric cover attached and
doped. No markings are painted onto the
fabric cover.
Tail Fin
Tail Fin complete
Price: € 300.00 + postage
available:
-Fokker E.V/D.VIII
-Fokker D.VII
The complete welding job is done here and
the tail fin is completely fitted together.
Tail Fin complete, painted and
covered
Price: € 450.00 + postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The Tail fin is completed, the frame painted
and the fabric cover attached and doped. No
markings are painted onto the fabric cover.
For the covering we use either printed five
colour camouflage linen fabric, or plain linen
fabric.
Tail Plane
Complete set of Fokker D.VII
tailplane
Prices (shipping world wide included!):
a.) Kit
€ 3,000.00
b.) Complete
€ 4,000.00
c.) Complete, painted and covered
€ 4,700.00
The Tailplane comprises the rudder, vertical
fin, stabilizer and elevator and can be
delivered as Kit, completed, or completed
and covered.
B.) Aircraft Parts
Controls
Surface Control Horn
Price: € 125.00 /piece
+ postage
Control horns as done by Fokker for e in
most of the planes designed between 1917
and 1918.
Torque Tube Control Horn
Price: € 125.00 /piece
+ postage
Control horns as done by Fokker for e in
most of the planes designed between 1917
and 1918. These control horns have been
placed on the torque tube to activate the
aileron cables.
Hinges
Price: € 90.00 /piece
+ postage
available:
-Fokker E.V/D.VIII
-Fokker D.VII
These are hinges as ed with the later
Fokker type aircraft such as the Fokker
D.VII and the E.V/D.VIII
Rudder Spar Top Cone
Price: € 150.00 /piece
+ postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
Top cone of the rudder main spar
Torque Tube Bearing Clambs
Fokker D.VII
Price: € 90.00 /set
+ postage
These are the bearing clambs for the torque
tube of the Fokker D.VII
Pulleye as used with Fokker
aircraft from 1916/17 on.
Price: € 30.00 /piece
+ postage
As far as we know did Fokker use both,
machined and cast pulleys of this style.
Our pulleys are made from machined
aluminium.
Streamlined steel tubes
Price: € 50.00 /meter
+ postage
We can deliver the following dimensiones:
45 x 23
42 x 20
53 x 24
54 x 22
65 x 32
Other dimensions can be produced on
request. Tool making is an extra of €
250.00.
Wing Fittings
Fokker DR.I
Wing Spar Attachment Fitting
Price: € 90.00 /piece
+ postage
Fitting as used on the Fokker Triplane
main spar to attach wing to the fuselage
and to the center cabane inverted “V”
struts.
Price: € 330.00 / set of four
+ postage
Fuselage and Fuselage Parts
Fokker D.VII Fuselage
Price: € 6,500.00 /piece
+ postage and crating
Completely welded fuselage frame of the
Fokker D.VII. Not included are the cabane
struts to carry the top wing and the
undercarriage attachment sockets. This still
leaves something to do for you.
Specify production run.
Engine bearers are laid out to carry either
the Daimler D.III or the BMW III engine.
Modifications to your specifications are
possible.
Frame is unpainted
Foot Step
Price: € 50.00 /piece
+ postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
Footstep to be attached to the lower left
side fuselage longeron.
Seat with mounting frame and
shoulder harness
Price: € 650.00 /unit
+ postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
Ready to install unit with shoulder harness
and seat mounting frame.
Prices for kit on request.
Fokker D.VII
Mounting clambs for lower
instrument panel attachment.
Price: € 50.00 /piece
+ postage
Completely welded, unpainted..
Attachment Socket
Price: € 100.00 /piece
+ postage
This is a socket of the ball and socket joint
of the undercarriage of Fokker aircraft like
the Fokker Dr.I, D.VI, D.VII, D.VIII.
Made from German St.52 grade steel.
The Dr.I used these also for the attachment
of the center cabane inverted “V” struts.
Price: € 350.00 /set of four.
+ postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
Undercarriage Leg Ball End
Price: € 150.00 /piece
+ postage
This is a ball end leg of the ball and socket
joint of the undercarriage of Fokker
aircraft like the Fokker Dr.I, D.VI, D.VII,
D.VIII. Forged from German St.52 grade
steel.
The Dr.I used these also for the attachment
of the center cabane inverted “V” struts.
Price: € 550.00 /set of four.
+ postage
Specify Type!
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
F kk D VII
M.G.-Mounting brackets
Price: € 100.00 /set of two
+ postage
Made from 5mm steel plate, completed
with a 20mm threat for the attachment
bolts of the machine gun installation.
Corner Bracing Gussets
Price: € 50.00 /20 rings
Made from 8/2 steel tube. These are ed to
cut ¼ circles from it which will be ed as
the corner gussets to attach the wire
bracing in the fuselage of Fokker aircraft.
20 Rings are enough for any Fokker
aircraft.
Turnbuckles
Price: € 50.00 /piece
Price: € 45.00 /for > 50 pieces
Turnbuckle as used with Fokker fuselages
in 1917/18.
- 40 mm Barrel of brass.
- Eyebolts of steel
Fokker D.VII
Tail skid top fitting
Price: € 50.00 /piece
Top fitting of tail skit for Fokker D.VII.
Unpainted part.
Tail skid spring
Price: € 30.00 /set of two
Spring for tail skid of Fokker D.VII
Fokker D.VII
Tail skid svievel fitting
Price: € 70.00
Svievel point fitting for Fokker D.VII tail
skid.
Tail skid for Fokker D.VII
Price: € 200.00
Fokker D.VII tail skid.
This is the raw and unwrapped wooden
piece made from ash.
Engine Equipment
Engine Bearing Clambs for
Fokker Aircraft with In-Line
Engines
Price: € 60.00 /piece
+ postage
These are the bearing clamps for Fokker
built aircraft using inline engines like the
six cylinder Daimler D.III, D.IIIa and
D.IIIaü as well as the BMW III.
Fokker D.VII
Main Throttle Quadrant Kit
Price: € 300.00 /piece
+ postage
All major parts of the main throttle
quadrant of the Fokker D.VII. No wooden
handles, no paint. Screws need to be
drilled for securing pins.
Fokker D.VII
Main Throttle Quadrant
Price: € 450.00 /piece
+ postage
Complete and painted main throttle
quadrant including vertical bearing tube.
Attachment holes in clips of bearing tube
are not drilled in, to suit part in to the
actual airframe
Axial Airscrew of either
2620mm diameter or 2780mm
diameter
2620mm
Price: € 1,500.00 /piece
+ postage
2780mm
Price: € 2,000.00/piece
+ postage
This is a well balanced airscrew for the
Fokker Triplane or the D.VII, respectively
the 110 HP 9-Cylinder rotary or the 160
PS Mercedes six cylinder in-line engine,
made from Walnut, Ash and Oak.
Undercarriage Parts
Undercarraige axle box
Price: € 450/piece
+ postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
This Axle box is made from a single piece
1mm aluminium sheet and is riveted using
steel rivets.
Pressed steel sheets for the
Axle to pass through
Price: € 300/set of four
+ postage
available:
-Fokker Dr.I
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The pieces are made from 1,5mm steel
sheet.
Steel box
Price: € 550/set of two
+ postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
This is the box where the undercarriage
struts are welded to. This box is the piece
where the axle passes through and can
slide up and down in.
Shock chord suspension
Price: € 550/set of four
+ postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
Undercarriage knee
Price: € 1,000.00/set of two
+ postage
available:
-Fokker Dr.I (late model)
-Fokker D.VI,
-Fokker E.V/D.VIII
-Fokker D.VII
The box and the shock chord suspension
pieces are not welded together since the
undercarriage legs have first to be welded
to the steel box.