COSWIN 7I FIRST INSTALLATION JBOSS SERVER

COSWIN 7I
FIRST INSTALLATION
JBOSS SERVER
Iukcw7i_jboss.doc
24/04/07 – Version 5
CONTENTS
CONTENTS......................................................................................................................................... 2
INTRODUCTION................................................................................................................................. 3
REQUIRED CONFIGURATION.......................................................................................................... 4
3 TIER DISPLAY................................................................................................................................. 4
INSTALLATION OF THE FILES FOR THE DATABASE CREATION .............................................. 7
CREATION OF THE ORACLE BASE/INSTANCE FOR COSWIN .................................................... 9
LICENCE INSTALLATION ............................................................................................................... 15
SCREENS IMPORTATION............................................................................................................... 17
SQLNET.ORA FILE UPDATE .......................................................................................................... 19
INSTALLATION JBOSS SERVER................................................................................................... 20
INSTALLATION OF COSWIN APPLICATION ................................................................................ 24
INSTALLATION GUIDE OF THE JBOSS SERVICE FOR WINDOWS ........................................... 26
DEPLOYMENT CONFIGURATION.................................................................................................. 29
INSTALLATION OF THE PRINTING SERVER ............................................................................... 32
INSTALLATION OF CLIENT’S STATION ....................................................................................... 46
STARTING COSWIN ........................................................................................................................ 47
SIVECO REPORTS DESIGNER’S INSTALLATION ....................................................................... 50
2
Iukcw7i_jboss.doc
24/04/07 – Version 5
INTRODUCTION
Dear Clients,
You have just received your CD-ROM for the COSWIN 7i installation
If you install COSWIN for the first time, we advise you to read carefully the all
procedure before beginning the installation.
Wishing you good receipt, we keep at your disposal for any further information,
please receive, Dear Clients, our best greetings.
COSWIN support
Ingeniering Department
3
Iukcw7i_jboss.doc
24/04/07 – Version 5
REQUIRED CONFIGURATION
3 TIER DISPLAY
ORACLE
DATABASE SERVER
ORACLE VERSION FOR THE DATABASE : 9.2.0.6 or >
Operating System *
Hard Disk
Minimum
/Recommended
RAM Memory
Minimum /
Recommended
Processor
Minimum
Windows 2000 (all versions)
1 Gb / 2 Gb
+ 6 Mb / user
30 Gb SCSI
1 Gb / database
estimated
Pentium IV
Windows 2003 (all versions)
1 Gb / 2 Gb
+ 6 Mb / user
30 Gb SCSI
1 Gb / database
estimated
Pentium IV
* Or any other OS which supports Oracle 9.2.0.6 or >. If you are not sure of the compliance with
your OS please contact us.
SIVECO recommends to use a dedicated Oracle Instance for COSWIN.
APPLICATION SERVER
Operating System *
Windows 2000 (all versions)
RAM Memory
Hard Disk
Processor
Minimum / Recommended
Minimum
Minimum
1 Gb / 2 Gb
+ 5 Mb / user
10 Gb SCSI
Pentium IV
1 Gb / 2 Gb
10 Gb SCSI
Pentium IV
+ 5 Mb / user
Application Servers compliant with the deployment of Coswin7i 3 tiers are:
- Oracle IAS (Internet application Server) : 9.0.4 JAVA Edition or 10.1.2
- Jboss Ver 4.0.2
- Tomcat Version 4.1.29
Windows 2003 (all versions)
* Or any other OS compliant with the application server (Unix, …). If you are not sure of the
compliance with your Application Server please contact us.
o TOMCAT server with JAVA workstations is uniquely reserved to a LOCAL deployment (LAN)
o For raisons of performances, SIVECO advises to use Jboss or IAS servers
o For Jboss or TOMCAT, the JSDK 1.4.2.x ( Sun) is required on the Application Server.
4
Iukcw7i_jboss.doc
24/04/07 – Version 5
PRINT SERVER (SIVECO REPORTS)
Operating System
RAM Memory
Hard Disk
Processor
Minimum / Recommended
Minimum
Minimum
Windows 2000
(all versions)
512 Mb / 1 Gb
4 Gb SCSI
Pentium IV
Windows 2003
(all versions)
512 Mb / 1 Gb
4 Gb SCSI
Pentium IV
N.B.: The print manager for COSWIN 7i is a Siveco Reports print server (RAS: Reports Application
Server). This server must be a Windows computer (512 Mb of RAM minimum). The print server
can be installed on the same computer as the database server or application server, if these are
installed on Windows. In this case the memory requisitions are cumulated.
JAVA CLIENTS WORKSTATION
Operating System *
RAM Memory
Minimum / Recommended
Hard Disk
Minimum
Processor
Minimum
Windows NT 4 workstation
(Pack 5 or +)
512 Mb / 1 Gb
1 Gb
Pentium IVI
Windows XP (all versions)
512 Mb / 1 Gb
1 Gb
Pentium IV
Windows 2000 (all versions)
512 Mb / 1 Gb
1 Gb
Pentium IV
* Or any other Operating System which support the version < 1.4.2_06 or 1.5.0_06 of JAVA
Runtime Edition .If you are not sure of the compliance with your OS please contact us.
SIVECO recommends to use mainly the 1.4.2_05 or 1.5.0_05
Remark: “CELERON” processors are not recommended.
HTML CLIENTS WORKSTATION
Operating System
RAM Memory
Minimum
Hard Disk
Processor
Minimum
Minimum
Windows NT 4 workstation
(Pack 5 or +)
512 Mb
1 Gb
Pentium IVI
Windows XP (all versions)
512 Mb
1 Gb
Pentium IV
Windows 2000 (all versions)
512 Mb
1 Gb
Pentium IV
Browser : Internet Explorer 6.0 or Mozilla Firefox 1.x
Remark: “CELERON” processors are not recommended.
5
Iukcw7i_jboss.doc
24/04/07 – Version 5
DEVICES
Monitor
As COSWIN is a graphical application, SVGA standard screens are mandatory. (Configuration:
minimum 1024*768)
Printer
Any printer compatible with the Operating System.
CD Player
Mandatory for the single user version,
Minimum 1 CD player to be shared for the network version.
Backup
SIVECO recommends the use of a Tape backup system that allows regular backups to be made
together with backup scheduler software.
6
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION OF THE FILES FOR THE
DATABASE CREATION
The installation of these files will permit the ORACLE database creation
This Installation must be done on the database server (if Windows) or on a Windows
workstation
1) Insert the CD-ROM in the reader. From the menu Choose "Start – Execute".
Write the order line: D:\SETUP7i.EXE (if D: = CD-ROM Reader)
Validate by OK.
The following window will be displayed:
Select the option « ORACLE »
Click on “Next” to continue.
7
Iukcw7i_jboss.doc
24/04/07 – Version 5
2) The following window will be displayed:
Attention the files and subdirectories will be directly installed in the indicated directory.
Indicate the path on which the files have to be installed (Ex: C:\Coswin) then Validate
by “NEXT” to start the files installation.
Be careful, the path must not contain space.
At the end of the installation, the following window will be displayed.
Validate by “OK”.
8
Iukcw7i_jboss.doc
24/04/07 – Version 5
CREATION OF THE ORACLE BASE/INSTANCE
FOR COSWIN
This step will create the ORACLE Instance/Base for COSWIN 7i.
An assistant will help you to create this Base/Instance also as all the Oracle objects
necessary to use COSWIN
An Oracle user ‘Name of the schema' (COSWIN by default with the Password by default:
COSWIN) acting as ‘DBA’ (administrator) will be created during this installation.
All the Oracle objects for COSWIN 7i are created on the schema of this user.
9
Iukcw7i_jboss.doc
24/04/07 – Version 5
IN VERSION WINDOWS NT NETWORK
VERY IMPORTANT: ORACLE WORKGROUPS/ENTERPRISE for WINDOWS NT
SERVER must already be installed before starting the base creation. (See
correspondent procedure)
At the end of the base creation do not forget to follow the procedure of the screens
importation.
From the SERVER:
Choose Start - Execute.
Write the following order line:
C:\COSWIN\Database\SIVCRORA.EXE
(If c:\coswin = directory where the « Oracle » files have been installed (see
last chapter)
The following window will be displayed:
[Database Location]
• Local Database: This option will create the Instance and the Base on the server
from which this program is started.
[Instance]
•
•
New: This option will create a new instance for COSWIN.
Existing: This option will create the Oracle objects for COSWIN on an instance
already existing. This option must imperatively be used when the precedent
option “Remote” has been chosen.
10
Iukcw7i_jboss.doc
24/04/07 – Version 5
Choose : "New" and add the (SID) instance name:
We strongly recommend to type: CWDB
[Schema]
This option permits to define the schema name that will be created in the instance.
We strongly recommend to type: COSWIN
[Chart. Set]
This option allows to define the characters to be used according to country. By default
‘English’ is selected, it is advisable to keep this choice for France, UK …
[Oracle Vers.]
•
Oracle 7 / Oracle 8 / Oracle 8i / Oracle 9i : Choose here the ORACLE version
used : ORACLE 9i imperative for Coswin 7i. By default the program detects the
Oracle version installed.
Validate by “NEXT”.
The following window will be displayed:
•
•
Users: Specify here the number of simultaneous users of your configuration
Req. Space : Amount of Mo that will be used by the Tablespaces. Keep the value as
defined by default (It is computed according to the user’s number).
• List of Drives: This list contains all the detected drives on the server with their total
space and their free space.
This list allows you to distribute the Files of the Oracle Base on one or several drives.
Select in the list the drive and specify in the field “USE” the amount of Mo to be used in the
selected drive.
• On: Add here the installation directory of the ORACLE base files. By default, the
directory suggested is:\Oracle\Ora81\OraData\svco.
Validate the parameters « List of Drives » and « On » by the button “SET”.
11
Iukcw7i_jboss.doc
24/04/07 – Version 5
1st Example :
Users = 10
Req. Space = 765 Mo
Drives Number = 1 D:
In that case, select the drive D: in the list and specify in the field “USE”: 765 then validate
by “SET”
2nd Example :
Users = 10
Req. Space = 765 Mb
Drive Number = 2 D:, E:
In that case, you can:
- select the drive D: in the list and specify in the field “USE” : 200 and validate by “SET”
- select the drive E: in the list and specify in the field “USE” : 565 and validate by “SET”
Validate by “NEXT” all the options chosen.
NOTE: WE STRONGLY RECOMMEND YOU TO CHOOSE THE PATHS AND
DISTRIBUTIONS SPECIFIED BY DEFAULT.
The following window will be displayed:
In this screen the program will offer you, according to the options previously chosen,
different solutions for the distribution of the Base Files. These “Solutions” are calculated by
the program according to the ORACLE rules for the distribution of the Base Files (For
example: distribute the data and index Base Files on different disks).
By default the Base Files are created in the directory %ORACLE HOME%\DATABASE
Choose then one of the solutions proposed and validate by “NEXT”
The following window will be displayed:
12
Iukcw7i_jboss.doc
•
24/04/07 – Version 5
COSWIN Language : Choose the parameters language of COSWIN. (Very Important,
for example to use a French version of COSWIN, choose ENGLISH)
Validate by “ NEXT ”.
The creation of the parameters file of the Instance, Base and Base Files (Tablespaces)
begins then. It can take around 10 to 20 mn.
After this creation, the following window will be displayed:
•
Database Alias : Name of the Alias for the instance. Let the value proposed by
default
•
Password for System: Add the user’s password “SYSTEM”. By default the password
proposed is: “MANAGER”. This password could be changed.
Validate by “ NEXT ”.
The following window will be displayed:
13
Iukcw7i_jboss.doc
24/04/07 – Version 5
Here, you must specify if you want to use the Tablespaces of the data and index or if you
prefer to create new ones.
Choose the option by default: "Use Existing"
Validate by “NEXT”.
The following window will be displayed:
•
•
•
Please select COSWIN Language: select the COSWIN Language (Parameters
language by default).
Please Select UTL_FILE_DIR : Unavailable
Please select UTL_FILE_DIR Network path : Unavailable
Validate by “NEXT”.
The assistant creates the principal objects (Tables, index….) of the Base. It can last up to
20 / 30 mn.
• When the “Status” line displays: “Wizard waiting for commands”, exit from the
program using the button “FINISH”.
Please go to the chapter:
LICENCE INSTALLATION
14
Iukcw7i_jboss.doc
24/04/07 – Version 5
LICENCE INSTALLATION
A floppy ‘Licence’ has been provided with the installation CD ROM of COSWIN 7i. This
floppy disk contains your installation Licence for COSWIN. You have to install it in order to
use the application.
The Licence installation is done on the same station on which the creation of the database
has been done.
It is not necessary to make this installation on each schema, but on each COSWIN
instance.
INSTALLATION
Copy the present file on a floppy disk in directory:
C:\COSWIN\Database
(If c:\coswin = directory on which the « Oracle » files have been installed (see
previous chapter)
Choose Start – Run from menu.
Type the following command line:
C:\COSWIN\Database\GOSCRIPT.EXE
(If c:\coswin = directory on which « Oracle » files have been installed (see
previous chapter)
The following window will be displayed:
[Connexion]
15
Iukcw7i_jboss.doc
24/04/07 – Version 5
• User Name : Input here the name of the schema to be updated (a
« COSWIN » schema existing in the instance)
• Password : Input here the « schema »’s password
• Database Alias: Input here database‘s alias.
• Oracle Version : Select the version of the database in use
• SQL Script : Input SQL name file of your Licence : Licence
Validate running of script by « RUN » button.
The update lasts about 2 seconds. When it’s done, GOSCRIPT program fields are
available again. You can then close it.
Please go to the chapter:
SCREENS IMPORTATION
16
Iukcw7i_jboss.doc
24/04/07 – Version 5
SCREENS IMPORTATION
This procedure allows to import in the database the COSWIN 7i screens.
From the SERVER :
Choose Start – Run from menu.
Write the following order line:
C:\COSWIN\Database\SC7i.EXE
(If c:\coswin = directory where the « Oracle » files have been installed (See
last chapter)
The following window will be displayed:
Select your program's language
Click on « Next » to continue
The following window will be displayed:
17
Iukcw7i_jboss.doc
24/04/07 – Version 5
Add here the Schema name that has just been created with the SIVCRORA.EXE
Program
Click on « Next » to continue
The following window will be displayed:
Add here the database alias name
Validate by « Finish » to start the import. (2/3 Minutes)
Please go to the chapter:
UPDATING OF THE SQLNET.ORA FILE
18
Iukcw7i_jboss.doc
24/04/07 – Version 5
SQLNET.ORA FILE UPDATE
BE CAREFUL! THIS STEP IS MANDATORY !
1/ Updating of the SQLNET.ORA file:
In the directory (Oracle installation directory)\NETWORK\ADMIN\
Edit the file SQLNET.ORA
At the end of the file write the following line: SQLNET.EXPIRE_TIME=5
19
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION JBOSS SERVER
COSWIN use a Jboss server.
Jboss is used too for the printing server (Reports).
In order to be able to install Jboss, it is necessary to install JSDK of Sun on the same
workstation first.
1) JSDK installation.
Insert the CD-ROM in the reader. . From the menu Choose "Start – Execute".
Write the order line:
D:\SERVER\JDK\j2sdk-1_4_2_05-windows-i586-p.exe
Validate by OK.
The following window is displayed:
Choose « I accept the terms in the license agreement » and press « Next »
Select “I accept the terms in the license agreement”
The following window is displayed:
:
20
Iukcw7i_jboss.doc
24/04/07 – Version 5
Press « Next »
The following window is displayed:
Press « Install »
21
Iukcw7i_jboss.doc
24/04/07 – Version 5
The following window is displayed:
The installation is finished. Press « Finish»
2) Jboss installation
Warning, Jboss server is installed on port « 80 » by default.
If this port is already used it is necessary to modify the configuration file
« Server.xml » after installation of server.
Insert the CD-ROM in the reader. . From the menu Choose "Start – Execute".
Write the order line:
D:\Server\Jboss\ jboss-4.0.2.exe
The following window is displayed:
22
Iukcw7i_jboss.doc
24/04/07 – Version 5
Select the path where Jboss must be installed. We advise you to install Jboss at the root
of the disk : The installation directory « jboss-4.0.2 » is then created.
Launch the installation using <Extract> button.
23
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION OF COSWIN APPLICATION
Warning, Jboss server must be already installed.
Insert the CD-ROM in the reader. . From the menu Choose "Start – Execute".
Write the order line:
D:\SETUP7I.EXE
Validate by OK, Select the language of the installation program and validate twice by
« Next ».
The following window is displayed:
Sélectionner « Server components »
Press « Next »
The following window is displayed:
24
Iukcw7i_jboss.doc
24/04/07 – Version 5
Select "COSWIN for JBOSS"
Press « Next »
The following window is displayed:
Choose the directory where Jboss is installed.
Press « Next »
The following window is displayed:
Choose the directory where JDK is installed.
Press « Next »
At the end of the installation, a window will be displayed, press OK
25
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION GUIDE OF THE JBOSS SERVICE
FOR WINDOWS
Préamble
Le présent document vous guidera dans l'installation du service Jboss sur une plate-forme
Windows (Win32).
Pre-requested
Jboss est indépendant de tout autre serveur. Le seul pré requis à son installation et à son
utilisation est de disposer d'une machine virtuelle Java.
Installation
1) JDK Parameters
You have to parameterize some variables of environment. They will be necessary for
Jboss to work properly.
For Windows NT/2000/XP, go in the properties of the work station (Right-Click on the
Work station, Properties), then click on the "Variables of environment" tab.
26
Iukcw7i_jboss.doc
24/04/07 – Version 5
Select "Path" and click on " Modify" (or " Edit").
Add at the beginning of the list the complete path towards the place where the JDK has
been installed, followed by "\bin". In the window below, the path is c:\ j2sdk1.4.2_05\bin for
the JDK has been installed in c:\ j2sdk1.4.2_05. Validate clicking on "OK".
Back to the precedent window, this time click on "New". Fill up this new window as
following, specifying in the "Variable value" part the path towards the place where the JDK
is installed.
2) Jboss parameters
Create a new variable of environment (As previously done for the JDK) called
JBOSS_HOME and ticking at the directory where the file has been uncompacted. This
one is necessary for Jboss to work and indicates its work directory
3) Installation of the Jboss service
Under Windows NT/2000/XP, add the following order in a window DOS :
Set in the directory :
C:\[Jboss installation directory]\bin
27
Iukcw7i_jboss.doc
24/04/07 – Version 5
And launch the file :
inst_jboss.bat [Name of the workstation where Jboss is installed]
Ex :
inst_jboss.bat SERVGMAO
At the end of the execution you must obtain the following message:
”The service was successfully installed”
The Jboss service is then set up, it is in Automatic starting mode, but it is stopped for the
moment
4) Starting up of the service
To start up Jboss, you can use the Windows services administrator:
Or add the order net start Jboss in a window DOS.
Warning : Jboss server will start within 2mn for start completely.
5) Deletion of the Jboss service
To delete Jboss from the services list, execute the following orders in a window DOS :
Set in the directory :
C:\[Jboss installation directory]\bin
Ex : C:\jboss-4.0.2\bin
And run the command line :
JBossService.exe -uninstall Jboss
The following message will be appears :
« The service was successfully installed. »
28
Iukcw7i_jboss.doc
24/04/07 – Version 5
DEPLOYMENT CONFIGURATION
In order to manage the various types of deployment available with 7i version, it is
necessary to define deployment options needed for your application.
This operation must be done from the APPLICATIONS SERVER.
Theses options are alterable with the application on the server :
CiServletLib.jar
This application is located in the following directories according to your Applications server
type :
C:\jboss-4.0.2\server\default\tmp\deploy\tmp28409ciserver.war\WEB-INF\lib
(if C:\jboss-4.0.2= Directory where Jboss is installed)
Run the CiServletLib.jar application with JAVA.
The following window is displayed:
Global : Allows to define your deployment configuration :
-
2-tier/3-tier : Choose the option corresponding to your configuration : for Jboos
choose : 3-tiers
Combo box «Oracle IAS/ Jboss» (Accessible only if the option 3-tier is set) :
Choose the applications server type
Database «Oracle/SQLServer» : Choose the database used.
Connections : It is possible to configure connections of databases from server
where Jboss is installed. Then the clients workstations will have the same
parameters and it will not be possible to modify them.
29
Iukcw7i_jboss.doc
24/04/07 – Version 5
Press on the button <+> to add a new configuration.
Default values are suggested, you must modify them :
Server : Name of the workstation where ORACLE is installed
Instance : Nameof the instance of the Coswin database
Port : Connection port. Set 1521 by default.
Schema : Name of the schema created while creating database
Description : Description of the connection, free field. It’s this description who is
used on the login window
Once these fields are filled in, save the configuration with the button : <
>
Mail : Allows to define the address of the mail server if you want to use « Mail »
function in Coswin.
30
Iukcw7i_jboss.doc
24/04/07 – Version 5
Host : Add here the name or IP address of mail server
The others options are not used
CE RAS : Allows to define the printing server address
Host : If the RAS print server is not on the same workstation as the applications server,
you must define here the name or IP address of the RAS printing server otherwise type in
127.0.0.1 IP adress.
31
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION OF THE PRINTING SERVER
The printing server SIVECO Reports: RAS (Report Application Server) permits to
administrate all the COSWIN printings.
The printing server must be installed on a Windows machine.
RAS INSTALLATION
Put Cd-rom 1/3 of BusinessObjects Enterprise XI R2 into the Cd-rom drive and wait until
the window below appears. If it does not, run EXI_Autorun.exe from the Cd-rom's root
folder :
Choose English and click on <Install>, the following window appears :
32
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on <Next>, The following window appears :
Select I accept the License Agreement and click on <Next>, the following window
appears :
33
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on Perform Server Installation and click on <Next>, the following window appears :
Enter the name of your company in those fields Full name : and Organisation :
Enter the code below, IN UPPER CASE, in the Product keycode : field.
C3200-CGHTJ2C-002100P-HRU1
Click on <Next>, the following window appears :
34
Iukcw7i_jboss.doc
24/04/07 – Version 5
Leave the default value for Destination folder and click on <Next>, the following window
appears :
Click on Custom then on <Next>, the following window appears :
35
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on Sample Reports and Help, and select
× Entire feature will be unavailable in the popup menu.
Do the same for Server Components so as to get:
36
Iukcw7i_jboss.doc
24/04/07 – Version 5
Expand Server Components > Servers > Central Management Server
Click on Central Management Server, and select
Will be installed on local hard drive in the popup menu.
Do the same for Report Application Server so as to have the following components
enabled:
•
•
•
Central Management Server (BusinessObjects Entreprise > Server
Components > Servers > Central Management Server)
Report Application Server (BusinessObjects Entreprise > Server
Components > Servers > Report Application Server)
Data Access and Output Formats (BusinessObjects Entreprise > Data Access
and Output Formats)
37
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on <Next>, the following window appears :
BusinessObjects Enterprise XI R2 needs a MySQL database to store system data.
•
•
•
Leave the default 3306 port value
Leave the default username BusinessObjects in MySQL BusinessObjects User
Account
Enter " siveco" in the following fields Password and Confirm Password in
MySQL root User Account and MySQL BusinessObjects User Account
38
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on <Next>, the following window appears :
Click on <Next>, the installation is about to start :
Wait until the installation wizard asks for the 2nd Cd-rom :
39
Iukcw7i_jboss.doc
24/04/07 – Version 5
Out Cd-rom 2/3 into the drive and click on<OK>.
Wait until the installation wizard asks for the 3rd Cd-rom :
Wait until the following window appears :
Click on <Register Later>, the following window appears :
40
Iukcw7i_jboss.doc
24/04/07 – Version 5
Click on <Finish>, the setup of BusinessObjects Enterprise XI R2 is now finished.
Three Windows services have been created automatically during the setup :
•
•
•
Central Management Server
MySQL 4.1.13a
Report Application Server
41
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION ORACLE CLIENT
In order to communicate with the database, it is OBLIGATORY to install on this machine
an « ORACLE » client.
Then you have to define IMPERATIVELY an ALIAS database:
Name of the alias = Name of the instance
42
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION OF THE REPORTS
A certain number of standard Reports are available in COSWIN.
You have to install these reports on the printing server in a directory that you can choose.
Take note of the directory name that you are creating, for it will be useful to config RAS.
Insert the CD-ROM of COSWIN7i in the reader. From the menu Choose "Start – Execute".
Write the order line:
D:\SETUP7i.EXE
(If D : = CD reader)
The following window will be displayed:
Choose the « Reports » option and click on « Next » to continue.
The following window will be displayed:
Choose the Directory of the Reports installation and click on Finish to start the installation.
43
Iukcw7i_jboss.doc
24/04/07 – Version 5
RAS CONFIGURATION
It is now necessary to do the RAS parameterization to indicate him the directory of the
Reports installation.
Go to Start > Programmes > BusinessObjects XI Release 2 > BusinessObjects Enterprise
> Central Configuration Manager
Select Report Application Server and with a right-click > select Stop.
Select Report Application Server and right-click > Properties > the Parameters tab.
•
•
Option Type : Database
Max number of records :
44
Iukcw7i_jboss.doc
o
o
•
•
•
24/04/07 – Version 5
Select Records limited to :
Enter 150000
Option Type : Server
Maximum simultaneous report jobs :
o Select unlimited Jobs :
Select the folder where SIVECO Reports reports are stored.
Click on <OK>.
Select Report Application Server and right-click > Start.
The configuration of BusinessObjects Enterprise XI R2 is finished.
45
Iukcw7i_jboss.doc
24/04/07 – Version 5
INSTALLATION OF CLIENT’S STATION
COSWIN 7i JAVA needs the installation on the JRE client station (Java Run Time Edition)
The JRE is available on the COSWIN installation CD.
Insert the CD-ROM in the reader. From the menu Choose "Start – Execute".
Write order line:
D:\CLIENT\JREW\ j2re-1_4_2_05-windows-i586-p.exe
Validate by OK.
A welcome window is displayed. Clic on next to continue.
The following window is displayed
Choose the option « By default » and click on « Next »
At the end on the installation, a window is displayed, clic on « FINISH ».
46
Iukcw7i_jboss.doc
24/04/07 – Version 5
STARTING COSWIN
COSWIN 7i is now installed.
In order to use COSWIN 7i, it is necessary that the application server is started as the
database server.
COSWIN STARTING
From a workstation, start the browser and indicate the following address:
Http:// [name of the pc]/coswin
Where [name of the machine] = Name of the server on which Jboss is installed
An HTML page will be displayed
Click on Start or on the center of COSWIN logo window:
* At the 1° Starting of COSWIN on a station, the co mplete loading of the application will be
executed (20s in Local Network)
* Then, only the last Updating of the COSWIN application done on the Jboss server will be
loaded.
Once loaded the application the following login window will be displayed:
User: User’s Name – By default a user « supervisor » is created in the database
Password: User’s Password – the supervisor Password by default = « supervisor »
Configuration: This is the connexion to the database. To configure this connexion, click
on the button , the following window will be displayed.
47
Iukcw7i_jboss.doc
Click on the button
24/04/07 – Version 5
to catch a new Configuration.
Some values by default are proposed, you must modify them:
Server : Name of the Machine on which ORACLE is installed
Instance: Name of the instance of the COSWIN base
Port : Connexion port. Let 1521 by default.
Schema: Name of the schema created during the database creation.
Description: This is the description of the connexion, a free field. This description is the
one to be used in the log window to « choose » the database on which you want to work.
Once these fields are filled in, save the configuration with the button:
48
Iukcw7i_jboss.doc
24/04/07 – Version 5
And click on OK, to come back to the Login window.
From this one, once the user’s name, the password and the configuration are filled in, click
on OK to enter COSWIN.
49
Iukcw7i_jboss.doc
24/04/07 – Version 5
SIVECO REPORTS DESIGNER’S INSTALLATION
SIVECO Reports’ installation must obligatory done on Windows environment.
Insert SIVECO Report CD-ROM in the drive. Choose ‘Start –Run’ from menu.
Type following command line:
D:\ CR9_AutoRun_UKPRO.exe (if D = CD ROM drive)
The installation window is opened:
Click on "SIVECO Reports 9 Install"
Wait while the assistant research the SIVECO applications already installed.
The welcome window appears : Clic on <NEXT> button
The licence agreement window appears :
Select "I accept the terms in License agreement" and go to "Next"
The installation type selection window appears
Select the standard option and the installation folder of SIVECO Reports and clic on the
« NEXT » button
The « Start installation » window appears. Clic on « NEXT » and let the installation
continue to the end.
At the end of the installation, clic on « FINISH » button
50