window treatments – drapery panels

CUSTOM WORKROOM
LOIS LAIDLAW
WENDI STRONG
PERSONAL ATTENTION ▫ PROFESSIONAL QUALITY
WHOLESALE
PRICELIST
2015
Revised & Updated: May 2015
▫ Window Treatments ▫ Bedding ▫ Pillows ▫ Cushions ▫ Accessories ▫ Installation ▫
1334 Brommer Street, Suite #B-5, Santa Cruz, CA 95062
831-458-2578 ▫ Fax: 831-458-2871
Email: Wendi.Drapery@gmail.com
Website: www.DraperyEnterprises.com
Phone:
TABLE OF CONTENTS
POLICIES AND TERMS …...........................................................................................i-v
Pleat Styles..............................................................................................................................vi
WINDOW TREATMENTS
Drapery Panels......................................................................................................6
Shower Curtains..............................................................................................5
Tiebacks..........................................................................................................8-9
Pleat Styles.....................................................................................................10
Sunbursts.............................................................................................................11
Valances on Boards.............................................................................................12-17
Board Charges................................................................................................18
Valances on Rods, Poles, Knobs.........................................................................19-26
Swags..................................................................................................................27-29
Cascades..............................................................................................................30-32
Jabots...................................................................................................................33-34
Cornice Boards, Upholstered...............................................................................35-36
Roman Shades......................................................................................................37-40
BEDDING
Bed Coverings......................................................................................................41-44
Bed Skirts.............................................................................................................45-46
Pillow Shams.......................................................................................................47-49
Upholstered Headboards......................................................................................50
ACCESSORIES
Throw Pillows......................................................................................................51-56
Cushions – New and Recover Existing................................................................57-58
Bolsters.................................................................................................................58
Chair Pads.............................................................................................................59
Bench and Chair Cushions – Reupholster.............................................................60
Table Accessories.................................................................................................61-62
ADD-ONS & EXTRAS...................................................................................................63-65
ADDITIONAL SERVICES
Alterations, Remakes, Measuring, Consultation, Calculating Yardage.................66
ADDITIONAL PRICE LISTS:
INSTALLATION Price List
LININGS Price List
PILLOW FORMS Price List
...........................................................................................................See separate price lists
POLICIES AND TERMS FOR DRAPERY ENTERPRISES
PAYMENT TERMS:
Our terms are – 50% Down Payment to start job, Balance due upon completion. If we are
installing your job, the balance is due at time of installation. If the installation date is beyond 2
weeks of completion date, or if we are not installing your job, the balance is due at completion of
fabrication. We accept Visa & MasterCard, American Express and Diner's Club. Returned
checks will be charged a $55.00 processing fee.
WORKORDERS AND CHANGES:
All work orders and/or changes must be in writing on Drapery Enterprises work order forms.
This will improve communication and reduce errors. By completing all information on the work order
forms, it greatly reduces the need for us to call you with questions which can delay your job. Please
make a copy of the enclosed work orders for your records. Changes made after production has begun
will incur additional charges and will increase lead time.
Please include only one type of treatment per work order and attach a swatch of the fabric and/or trims
whenever possible. Staple these to the work order with the face and up direction marked. You can
mail, fax or email orders and changes. Drapery Enterprises will not be held responsible for orders
or changes not confirmed in writing.
Because names of treatments vary from workroom to workroom and from one part of the country to
another, please use the item numbers and treatment names as specified in our price list on work orders
and when communicating with the workroom. It is always best to include a sketch, photo or magazine
picture with your work order.
LEAD TIMES:
Lead time is typically 4-6 weeks. Lead time begins when a 50% Down Payment, a completed work
order and ALL materials necessary to complete a job are received. Lead times are subject to change at
any time. Upcoming holidays, large jobs, back orders and fabric flaws may lengthen lead times.
Please always call before promising a completion or installation date to your client.
SCHEDULING ORDERS:
Jobs are completed on a first come, first serve basis. Jobs will be added to the schedule when a
completed work order, including your 50% Down Payment and ALL materials necessary to fabricate
the treatment are received. Until then, a completion date cannot be guaranteed.
RUSH ORDERS:
Rush orders, or jobs taken out of order, will be available on an “as possible” basis and will only be
completed after receipt of your 50% Down Payment and ALL necessary materials and completed
work orders. This option may not be available during the holidays. Rush orders will incur a 30%
upcharge. Please check with the workroom for the current lead times and job schedule before sending
rush orders.
HOLIDAY CUT-OFFS:
Typical holiday cut-off dates are: Thanksgiving – October 1st, Christmas – November 1 st, however
these are subject to change. Please check with Drapery Enterprises for current holiday cut-off dates
and before promising a completion or installation date to your customer.
i
POLICIES AND TERMS … continued
ORDER CANCELLATION:
If you wish to cancel a job, you will be charged for supplies ordered and/or used and for labor already
completed.
INSTALLATION:
Drapery Enterprises offers professional installation. We are licensed and bonded, CA license #822552.
Your presence at installations will ensure that treatments are installed as you planned. Please ask your
customer to remove furniture and valuable or sentimental items from the work area before installation
begins. For safety purposes children and pets should not be in the installation area.
WINDOW TREATMENT PROPORTIONS:
Please be aware that a treatment may turn out to look different from the photograph or drawing sent if
the proportions of your client’s window are different from the window in the photograph or drawing.
For that reason, we always suggest drawing treatments to scale before sending your work orders. If the
same treatment is being made for multiple windows of various sizes, the treatments’ design or
proportions may need to be altered to appear uniform or harmonious from one window to the next.
PRICELIST ILLUSTRATIONS:
In an effort to improve communication between you and Drapery Enterprises, we have provided
illustrations of various treatments. These are meant to be representations of the finished product only
and are not exact photographic images. We recommend sending photos or magazine clippings of
treatments and dimensioned drawings whenever possible to avoid misinterpretations.
DROP-SHIPMENTS:
If you are drop-shipping merchandise, please have the vendor company mark it with your company
name and your customer’s name. Instruct the fabric company to send you a swatch for your approval,
and indicate fabric details on your work order. Drapery Enterprises shall not be held responsible for
treatments made from incorrectly drop-shipped or miss-labeled fabric.
FABRIC SHIPMENTS:
All fabrics should be rolled on tubes. If fabric is flat-folded, there may be an additional charge for
pressing. We cannot guarantee removal of creases.
FABRIC INSPECTION AND FLAWS:
In our attempt to create the highest quality product, every effort will be made to inspect for and cut
around flaws, when possible.
APPROPRIATE FABRIC FOR THE TREATMENT:
If you have questions about how a fabric will work for a specific treatment, please send a swatch with
a picture or drawing and specifications for the proposed treatment. We will be happy to assist you with
your choices. However, it is ultimately the designer’s responsibility to choose fabrics suitable for the
treatments being fabricated from them.
ii
POLICIES AND TERMS … continued
FABRIC STABILITY:
No fabric is completely stable. All fabrics stretch and shrink due to yarn content, weather, humidity,
and construction. Loose, open weaves and stretchy fabrics are particularly susceptible to changes in
length. Drapery Enterprises shall not be held responsible for length changes due to the above factors.
FABRIC DURABILITY:
All fabrics wear differently depending on the amount and type of usage, exposure to sunlight,
moisture, humidity or dirt, and cleaning and pressing methods used. Drapery Enterprises shall not be
held responsible for how a fabric wears now or in the future.
FABRICS REQUIRING AN SURCHARGE:
An extra 35% will be added for fabrics requiring additional steps or special handling in
fabrication. Examples of fabrics requiring an up charge are velvet, linen, quilted fabrics, lace,
casement and crewel. If you are in doubt about your fabric, please send a swatch along with
specifications for the proposed treatment.
FIRE RETARDANT FABRIC:
An extra 25% will be added for Fire Retardant (FR) fabrics. FR fabrics must be indicated on the work
order and the fabrics clearly marked. Drapery Panels will be charged a flat rate of $5.00 per width.
SHEETS:
There is an additional labor charge of $15 per sheet used to fabricate from sheets. Creases may
not press out and the pattern may not be able to be matched at the selvage. Because of this, more
sheets may be needed than originally planned on.
LINING:
Lining is suggested to protect your clients’ fine fabrics. Lining is not included in the price unless
otherwise specified. Please indicate on the work order the type and color of lining. Please also specify
interlining if needed. See our available linings price list..
COM LINING:
$2.50 per yard will be charged for using COM lining, due to logistics.
ALTERATIONS AND REMAKES:
Items sent for alterations or remakes must be cleaned first. Drapery Enterprises shall not be held
responsible for existing damage or fading, and cannot guarantee removal of creases or stitch marks.
New lining must be used for remakes.
YARDAGE CALCULATION:
Please call for assistance if you are unsure about calculating yardage. We can provide you with charts
and formulas to assist you in your calculations. If you need our assistance, the fee is $50 per hour.
When computing yardage, remember to allow for pattern repeats and centering of pattern motifs when
necessary. We recommend ordering 1 to 2 extra pattern repeats per job.
iii
POLICIES AND TERMS … continued
INSUFFICIENT YARDAGE AND FABRICATION METHOD CHANGES:
If there is insufficient yardage, there will be a minimum charge of $35 for unrolling, inspecting,
re-rolling and refiguring insufficient yardage. If you ask us to change our standard method of
fabrication (use methods which are more time-consuming), there will be an extra cost by the hour.
Please indicate on the work order the method you wish to use and how you planned the fabric cuts.
PARTIAL WIDTHS:
Please round up to full units when pricing products. All partial widths are charged as whole widths.
Widths are figured by the panel. Example: A three width pair of draperies is billed as four widths or
two widths per panel. Example: A 1 ½ width panel is billed as two widths.
ORIGINAL OR UNUSUAL TREATMENTS:
We will be happy to fabricate treatments not shown in the price list. Please submit photos or drawings
with dimensions along with fabric swatches. Mock-ups can be fabricated if necessary at a cost of
$50 per hour.
SHIPPING CHARGES:
Delivery and pickup are your responsibility. Upon request, we will deliver to you for a $25 fee when
we are in the area. If we are shipping to you, the cost of shipping & handling will be added to your
order. Oversized items may need to be shipped freight at an additional cost. To reduce the amount of
delivery and pickup needed, you may drop-ship fabrics to the workroom. Work orders may be mailed,
emailed or faxed. If we are installing your product, delivery is included.
PRICING AND SPECIFICATIONS:
Due to the custom nature of this industry, prices and standard specifications are subject to change
without notice. Please use this price list as a guide. Unforeseen problems, such as difficult fabrics, may
necessitate an extra cost.
ESTIMATES:
Estimates are subject to change once we have the fabric, final measurements and completed work
orders in the workroom. Estimates are good for 60 days.
GUARANTEE:
Drapery Enterprises guarantees its work for 30 days from the invoice date. Please inspect treatments
upon receipt and before installation to assure proper sizes and correct fabric. Drapery Enterprises shall
not be held responsible for charges to reinstall treatments. We reserve the right to correct any
problems with an order and will do so immediately. Designer errors will be reworked as soon as
possible at your expense. Additional costs will be added for: pressing, and/or refolding treatments that
are not returned to the workroom in the same condition as they left.
iv
POLICIES AND TERMS … continued
CONSULTATIONS IN SHOP:
Yardage calculations, write work orders, fabrication planning, etc., $50 per hour.
Payment is due at time of service.
CONSULTATION AT JOBSITE:
$80 per hour includes check measure and travel time. Payment due upon receipt of invoice.
ARCHES:
Please call for a quote. Depending on size and type of fabric, there will be a minimum of 50% extra
cost.
STORAGE:
Drapery Enterprises is not responsible for fabrics left in the shop over 30 days. If you want leftovers
returned to you or your client, please specify on your work order.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
v
PLEAT STYLES
Pinch Pleat – 3 finger
French Pleat
Pinch Pleat – 2 finger
Euro Pleat – 3 finger
Tacked at top
Euro Pleat – 2 finger
Tacked at top
Goblet Pleat
Butterfly Pleat – 2 finger
Tacked at back
Butterfly Pleat – 3 finger
Tacked at back
Cartridge Pleat
Grommet Top
Flat Panel
Ripple-fold
vi
Inverted Box Pleat
WINDOW TREATMENTS – DRAPERY PANELS
DRAPERY PANELS – labor per width 2 WIDTH MINIMUM CHARGE ON PANELS
4 WIDTH MINIMUM CHARGE ON PAIRS
• 4” double bottom hems, 1 ½” double side hems, 3 ½” returns and overlaps
• Weights in corners and on seams, seams hidden when possible
• Partial widths are priced as full widths and priced per panel. (Ex: 3 ½ width pair = 4 widths)
• 118” yardage is charged at 48” widths
Add-ons – Add to regular price – Drapery Panels
Attached valance
–per width
Arched Top – Call for Quote
Banding
–per lineal foot
Bead Weights –added to hem
–per width
BlackOut lining –labor only
–per width
COM Lining-special colors
-per yard
Custom Pleating or Spacing-Per Width
Difficult Fabric – velvet, linen, lace, casement, etc
Hems & Headers at 6”
–per width
Finished lengths over 108”
–per width X –per foot
French Black Out –labor only
–per width
French Seams
–per seam
Fire Retardant (FR), includes SS pins
–per width
Horizontal Seaming
–per width
Interlining –labor only
–per width
Interlining, Bump –labor only
–per width
Italian Stringing
–per ring
Memory Stitch
–per width
Pieced Hems or Headers
–per width
Pillow Case Side Hems to 108”
–per seam
Pleat to Stripe
–per width
Sheer Buckram
–per width
Page |1
Item Code
DPUP-Att
DPUP-Arch
Band
DPUP-BeadWt
DPUP-BO
DPUP-Com
Dpup-CustPleat
Diff
DPUP--6
DPUP-Fl
DPUP-FBO
DPUP-FrSm
DPUP-FR
DPUP-Horiz
DPUP-Inter
DPUP-Bump
DPUP-ItStr
DPUP-Mem
DPUP-PieceHem
DPUP-PIL
DPUP-Strip
DPUP-Sheer
Add:
20.00
Minimum 50%
6.00
9.00
6.00
2.50
15.00
Add 35%
13.00
5.00
40.00
20.00
7.00
15.00
12.00
15.00
6.00
15.00
15.00
15.00
15.00
6.00
WINDOW TREATMENTS – DRAPERY PANELS
Item – Drapery Panels
Item
Code
Unlined
Lined
Accordiafold Drapery
DP-Acc
36.00
40.00
Butterfly Pleat – 2 finger,
outer fingers tacked back
DP-But2
31.00
35.00
Butterfly Pleat – 3 finger,
outer fingers tacked back
DP-But3
32.00
36.00
DP-Cart
24.00
28.00
Cartridge Pleat
Page |2
Illustration
Item – Drapery Panels
Item
Code
Unlined
Lined
Cuffed Top
AKA Flounced,
Fold per Valance
– specify length of cuff,
add for rings if hand sewn
DP-Cuff
32.00
36.00
Euro Pleat – 2 or 3 finger
tacked at top of pleat
DP-Euro
23.00
27.00
Flat Panel/Slouch (with pintuck)
– add for hand sewn rings
DP-Flat
22.00
26.00
Goblet Pleat
– top of pleat is rounded &
filled, pleat is tacked below
buckram
DP-Gob
28.00
32.00
DP-Grom
23.00
25.00
Grommet Top, Flat
– add cost for grommets
and setting – 8” C-C
(8” apart, 7 grommets per width,
no less than 1 ½ – 2xs full)
Page |3
Illustration
Item – Drapery Panels
Hourglass
– add cost of tieback
Item
Code
Unlined
Lined
DP-Hour
25.00
27.00
DP-INV
23.00
27.00
Pinch Pleat
– 2 finger pleat
DP-PP2
23.00
27.00
Pinch Pleat
– 3 finger pleat
DP-PP3
23.00
27.00
Ripplefold Drapery
– estimate 2.5x fullness
DP-Rip
34.00
38.00
Inverted Pleat
Page |4
Illustration
Item
Code
Unlined
Rod Pocket
– Top and Bottom
DP-RPTB
22.00
27.00
Rod Pocket
– top only,
w/ or w/o heading
DP-RP
22.00
24.00
Rouched Top
– stationary panels
DP-Rouch
60.00
64.00
Scallop Top Tab Drapery
– Café Curtain
DPScalTopTab
Shower Curtain
– flat panel (72” x 72” std)
Includes 12 buttonholes or
12 ½“ SS grommets
DP-ShowFlat
Item – Drapery Panels
N/A
Page |5
98.00
Lined
55.00
125.00
Illustration
Item – Drapery Panels
Item
Code
Unlined
Smocked Panels (stationary)
– includes cost of tape
DP-Smock
36.00
40.00
Tab Front Drapery
DP-TabFr
44.00
48.00
Tab Top Drapery
– approx 5 tabs included
per width
DP-Tab
38.00
42.00
Tent Flap Drapery
– per flap/panel
– mounted on board
DP-Tent
---
50.00
Page |6
Lined
Illustration
Item – Drapery Panels
Tie Top Drapery
Item
Code
DP-Tie
Unlined
N/A
Lined
Illustration
65.00
'';//PIN SETTING GUIDE FOR PLEATED TREATMENTS:
• Top of hook from top of treatment
Rod Type:
Pin Setting: Rod Type:
Pin Setting:
Ceiling rod
1 ¼”
Rings
¼”
Conventional Traverse Rod/Superfine 1 ¾”
Sheer Behind Drapery on Traverse Rod 1 3/8”
5
Decorator Traverse Rod
/8”
ROD POCKET AND TAKE-UP GUIDE:
• Take-ups are approximate and will vary with thickness and stiffness of fabric.
Rod Type:
Pocket Size:
Take-up: Rod Type:
Pocket Size:
2” Wood Pole
4 ¼”
2”
Oval Rod
1 ½”
1 3/8” Round Pole
2 ¾”
1 3/8”
½” and 7/16” Rod
1 ½”
1 ½” “D” Pole
3”
1 ¼”
2 ½” Continental
3 ½”
1” Round
2”
1”
4 ½” Continental
5 ½”
3/8” Round
1 ¼”
3/8”
Page |7
Take-up:
3/8”
½”
3/8”
3/8”
ACCESSORIES - TIEBACKS
TIEBACKS – labor per EACH:
• Standard size is 3” wide
• Rings – sew on each ring – $5.00
• Total length of tieback is typically ½ the rod face width or 20” per width to be tied back
Item - Tiebacks
Item
Code
To 36”
To 72”
To 108”
Braided
– ½” Welt Cord
TB-Braid
48.00
53.00
58.00
Cascade
TB-Casc
39.00
44.00
49.00
Double Ruffle
TB-DblRuf
39.00
44.00
49.00
Flat, Pleated
TB-PltFlat
22.00
27.00
32.00
TB-ShFlat
22.00
27.00
32.00
Flat, Shaped
Page |8
Illustration
Item - Tiebacks
Item
Code
To 36”
To 72”
To 108”
Flat, Shaped
w/ ¼” welt
TB-ShFlatWelt
39.00
44.00
49.00
Shirred Jumbo welt
TB-ShirWelt
35.00
40.00
45.00
Straight Flat
TB-Flat
18.00
23.00
28.00
Straight Flat
w/ ¼” welt
TB-FlatWelt
35.00
39.00
44.00
Straight Flat
w/ ruffle
TB-FlatRuf
36.00
40.00
45.00
Straight Shirred
TB-ShirFlat
35.00
40.00
45.00
Straight Shirred
w/ ¼” welt
TBShirFlatWelt
52.00
57.00
62.00
Page |9
Illustration
PLEAT STYLES
Pinch Pleat – 3 finger
French Pleat
Pinch Pleat – 2 finger
Euro Pleat – 3 finger
Tacked at top
Euro Pleat – 2 finger
Tacked at top
Goblet Pleat
Butterfly Pleat – 2 finger
Tacked at back
Butterfly Pleat – 3 finger
Tacked at back
Cartridge Pleat
Pinch Pleat – 2 finger
Pinch Pleat – 3 finger
Ripple-fold
P a g e | 10
Inverted Box Pleat
WINDOW TREATMENTS – SUNBURSTS
SUNBURSTS – labor per square foot
• Includes center rosette
• Includes right angle Velcro for mounting to inside or outside of wood trim
• Template is required
• Allow 2-3 times fullness
Item – Sunbursts
Item
Code
Unlined
Lined
Sunburst, no heading
– per square foot
SB-no
20.00
22.00
Sunburst, w/ heading
– per square foot
SB-w/
22.00
24.00
P a g e | 11
Illustration
WINDOW TREATMENTS – VALANCES ON BOARDS
VALANCES ON BOARDS – labor per lineal foot (including returns): 4’ minimum
• Finished lengths up to 24”, use drapery panel pricing for longer lengths
• Board charges, see page 20
Add-ons – Valances on Boards
BlackOut lining, labor only
–per foot
Contrast inset in pleat
–per inset
Interlining, labor only
–per foot
Pleat added to valance (corner, contrast pleats) –per pleat
Shaped mounting boards (w/ profile)
–per foot
Velcro for mounting
–per foot
Miter Boards
–each
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Item – Valances on
Boards
Item
Code
Unlined
Item Code
VBUP-BO
VBUP-ConPlt
VBUP-Inter
VBUP-Pleat
VBUP-Shaped
VBUP-Velcro
MITER
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
Lined
Austrian
– includes sheer tape
VB-Aus
34.00
39.00
Awning, flat
– Add for scalloped
or decorative bottom
VB-Awnfl
42.00
47.00
Awning, shirred
VB-Awnsh
50.00
55.00
Banded Inverted
Box Pleat
VB-BandBox
35.00
37.00
P a g e | 12
Illustration
Add:
2.00
17.00
3.00
17.00
7.00
7.00
15.00
3.50
3.75
4.50
7.00
8.00
Item – Valances on
Boards
Item
Code
Unlined
Box Pleated Balloon
VB-BoxBal
Box Pleated/
Inverted Box Pleat
– shaped bottom
VB-Boxsh
N/A
37.00
VB-Box
N/A
32.00
Cascade Arch
VB-CascArch
N/A
35.00
Center Pleat
VB-CentPl
Cluster Shirred
– shaped bottom
VB-ClusSh
Cluster Shirred
– straight bottom
VB-Clus
28.00
33.00
Double Shirred
VB-DblShir
34.00
39.00
Box Pleated/
Inverted Box Pleat
– straight bottom,
33.00
Lined
35.00
shown w contrast,
open pleats –see add-ons
25.00
N/A
P a g e | 13
29.00
37.00
Illustration
Item – Valances on
Boards
Item
Code
Unlined
Lined
Empire or Kingston
VB-Emp
N/A
39.00
Flat Soft
– scallop bottom
VB-Flatscal
N/A
39.00
VB-Flatsh
N/A
39.00
Flat Soft
– shaped bottom,
shown w/ optional top welt
–see add-ons
Flat Soft
– straight bottom,
shown w/ draped cord &
corner pleats –see add-ons
VB-Flat
20.60
25.00
French Pick-Up
– Railroaded
VB-FrPU
Handkerchief
VB-Hank
25.00
29.00
Mock Hobbled Roman
VB-MockHob
34.00
39.00
Mock Roman
– No returns
VB-MockRom
29.00
32.00
N/A
P a g e | 14
39.00
Illustration
Item – Valances on
Boards
Multi-piece
(blackout lining
recommended)
Item
Code
VB-Multi
Unlined
N/A
Lined
39.00
Opera Topper, box
pleated balloon, tapered
bottom
– per square foot
VB-Opera
Pull-Up
– must be self or
contrast lined
VB-PullUp
N/A
27.00
Relaxed Drop Swag
– includes cascades
and jabots
VB-RelDrop
N/A
50.00
Relaxed Mock Roman
VB-RelMock
Shaped Bottom, Bell
VB-SBBell
Smocked
– arch bottom
– includes tape
VB-SmockArch
45.00
29.00
N/A
27.80
P a g e | 15
50.00
32.00
38.00
38.00
Illustration
Item – Valances on
Boards
Item
Code
Unlined
Smocked
– scallop bottom
– includes tape
VB-SmockScal
N/A
Smocked
– straight bottom
– includes tape
VB-Smock
24.75
33.00
Smocked
– taper bottom
– includes tape
VB-SmockTap
25.75
36.00
Smocked Pouf
– includes tape
VB-SmockPouf
27.80
36.00
Stagecoach
– folded w/ ties
VB-StgFold
27.00
29.00
Stagecoach
– rolled w/ ties
VB-StgRoll
N/A
29.00
Teardrop
– add for
embellishments
VB-Tear
N/A
39.00
Tent Flap
– add for inset behind
flaps
VB-Tent
N/A
50.00
P a g e | 16
Lined
36.00
Illustration
Item – Valances on
Boards
Turban
Item
Code
VB-Turb
Unlined
N/A
P a g e | 17
Lined
33.00
Illustration
BOARD CHARGES
1” x 2” finished measurement ¾ x 1 ½”
–per foot
BD – 2
1.70
1” x 3” finished measurement ¾ x 2 ½”
–per foot
BD – 3
1.95
1” x 4” finished measurement ¾ x 3 ½”
–per foot
BD – 4
2.00
1” x 6” finished measurement ¾ x 5 ¼”
–per foot
BD – 6
2.25
1” x 8” finished measurement ¾ x 7 ¼”
–per foot
BD – 8
3.25
1” x 10” finished measurement ¾ x 9 ¼”
–per foot
BD – 10
4.00
1” x 12” finished measurement ¾ x 11 ¼”
–per foot
BD – 12
4.25
BD-Bend
7.75
3/8” x up to 6”
All other sizes, ripping to size
–per foot
BDUP
1.95
Mitered Boards
–per miter
Miter
15.00
P a g e | 18
WINDOW TREATMENTS – VALANCES ON RODS, POLES, KNOBS
VALANCES ON RODS – labor per width (unless otherwise specified):
• Finished lengths up to 24”, use drapery panel pricing for longer lengths
• Partial widths are considered full widths
• 4 width minimum
Add-ons – Valances on Rods, Poles, Knobs
BlackOut –labor only
–per width
Contrast inset in pleat
–per inset
False Rod Pocket, hand stitched –per width
Interlining –labor only
–per width
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Item Code
VRUP-BO
VRUP-Conpl
VRUP-FlsRP
VRUP-Inter
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
Lined
Accordia-fold
– contract
– includes cost of snap tape
VR-Acc
Alyse
– add for tassels
– per foot of rod face
VR-Aly
N/A
39.00
Banner
– per banner
VR-Ban
N/A
27.00
Butterfly Pleat
– 2 finger,
outer fingers tacked
VR-But2
29.00
29.00
P a g e | 19
33.00
32.00
Illustration
Add:
6.00
17.00
12.00
9.00
3.50
3.75
4.50
7.00
8.00
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Lined
Butterfly Pleat
– 3 finger,
outer fingers tacked
VR-But3
31.00
34.00
Cartridge Pleat
– rounded pleat is stuffed
VR-Cart
22.00
25.00
Cluster Pleat
– pleats grouped together
VR-Clus
25.00
28.00
Cuffed Top
– includes ¼” self-welt
VR-Cuff
Double Rod Sleeve
– no headings
VR-DblSlv-no
27.00
N/A
Double Rod Sleeve
– w/ headings
VR-DblSlv-w/
28.00
N/A
Euro Pleat
– 2 finger,
tacked at top of pleat
VR-Euro2
20.00
N/A
P a g e | 20
39.00
23.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Euro Pleat
– 3 finger,
tacked at top of pleat
VR-Euro3
20.00
23.00
Flat Panel / Slouch
– (no pleats)
– add for hand sewn rings
VR-Flat
19.00
22.00
Goblet Pleat
VR-Gob
24.00
27.00
Grommet Top
– flat
– add cost of grommets
VR-Grom
18.00
21.00
Open Kingston or Empire
– per foot of rod face
VR-OpenKing
Pinch Pleat
– 2 finger pleat
– arch bottom
VR-PP2arch
Pinch Pleat
– 2 finger pleat
– scallop bottom
VR-PP2scal
N/A
33.00
N/A
P a g e | 21
Lined
39.00
36.00
39.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Lined
Pinch Pleat
– 2 finger pleat
– taper bottom
VR-PP2tap
36.00
39.00
Pinch Pleat
– 2 finger pleat
– straight bottom
VR-PP2
20.00
23.00
Pinch Pleat
– 3 finger pleat
– arch bottom
VR-PP3arch
36.00
39.00
Pinch Pleat
– 3 finger pleat
– scallop bottom
VR-PP3scal
Pinch Pleat
– 3 finger pleat
– straight bottom
VR-PP3
Pinch Pleat
– 3 finger pleat
– taper bottom
VR-PP3tap
Pouf
VR-Pouf
(Rod Pocket top & bottom)
N/A
20.00
N/A
18.00
P a g e | 22
39.00
23.00
39.00
21.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Lined
Ripple-fold
– includes cost of tape
VR-Rip
Rod Pocket
– arch bottom
VR-RParch
N/A
32.00
Rod Pocket
– scallop bottom
VR-RPscal
N/A
35.00
Rod Pocket
– straight bottom
VR-RP
Rod Pocket
– taper bottom
VR-RPtap
Rod Pocket
– Balloon
VR-RPBal
Rod Pocket
– Empire,
shown w/ bottom banding
– see add-ons
VR-RPEmp
29.00
18.00
N/A
25.00
N/A
P a g e | 23
32.00
20.00
35.00
27.00
39.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Lined
Rod Sleeve
– no headings
VR-RSlv-no
20.00
N/A
Rod Sleeve
– w/ headings
VR-RSlv-w/
22.00
N/A
Shaped Cuff
– includes ¼” welt
VR-ShCuff
N/A
37.00
Shirred Tab Scallop
– per foot of rod face
VR-ShTabScal
N/A
39.00
Smocked
– arch bottom
– includes cost of tape
VRSmockarch
Smocked
– scallop bottom
– includes cost of tape
VRSmockScal
Smocked
– straight bottom
– includes cost of tape
VR-Smock
N/A
N/A
37.00
P a g e | 24
39.00
35.00
35.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Smocked
– taper bottom
– includes cost of tape
VR-SmockTap
N/A
Smocked
– Balloon
– includes cost of tape
VR-SmockBal
37.00
39.00
Smocked
– Pouf
– includes cost of tape
VRSmockPouf
37.00
39.00
Tab Front
VR-TabFr
37.00
39.00
Tab Top
– approx 5 tabs included
per width
– shaped bottom
VR-Tabsh
Tab Top
– approx 5 tabs included
per width
– straight bottom
VR-Tab
Tab Top
– Box Pleated
– shaped bottom
VR-TabBoxsh
N/A
40.00
N/A
P a g e | 25
Lined
39.00
50.00
42.00
50.00
Illustration
Item –Valances on Rods,
Poles, Knobs
Item
Code
Unlined
Lined
Tab Top
– Box Pleated
– straight bottom
VR-TabBox
Tab Top
– French Pick-Up
– per foot of rod face
width
VR-TabFrPU
N/A
50.00
Tab Top
– Swagged
– per foot of rod face
width
VR-TabSwag
N/A
50.00
Tab Top
– Teardrop
– per foot of rod face
Width
– add for embellishments
VR-TabTear
N/A
39.00
Twisted Rod Sleeve
– includes ¼” welt
top & bottom
– must be self or
contrast lined
– shown w/ banding (extra)
VR-TwRSlv
N/A
45.00
43.00
Illustration
45.00
PIN SETTING GUIDE FOR PLEATED TREATMENTS:
• Top of hook from top of treatment
Rod Type:
Pin Setting: Rod Type:
Pin Setting:
Ceiling rod
1 ¼”
Rings
¼”
Conventional Traverse Rod/Superfine 1 ¾”
3
Sheer
Behind
Drapery
on
Traverse
Rod
1
/8”
5
Decorator Traverse Rod
/8”
ROD POCKET AND TAKE-UP GUIDE:
• Take-ups are approximate and will vary with thickness and stiffness of fabric.
Rod Type:
Pocket Size:
Take-up: Rod Type:
Pocket Size:
2” Wood Pole
4 ¼”
2”
Oval Rod
1 ½”
1 3/8” Round Pole
2 ¾”
1 3/8”
½” and 7/16” Rod
1 ½”
1 ½” “D” Pole
3”
1 ¼”
2 ½” Continental
3 ½”
1” Round
2”
1”
4 ½” Continental
5 ½”
3/8” Round
1 ¼”
3/8”
P a g e | 26
Take-up:
3/8”
½”
3/8”
3/8”
WINDOW TREATMENTS - SWAGS
•
•
•
•
•
SWAGS – labor per lineal foot:
Swags are cut on bias if possible. Swags not cut on bias or from stiff fabrics may not have
smooth, rounded folds. Breaks in the folds may occur. Interlining will sometimes help soften
breaks.
Swags from directional fabrics may need to be cut straight for design integrity
If exact swag drop length is specified, workroom will fabricate swag as close as possible to
desired length. Exact drop lengths cannot always be achieved depending on swag width
Board mounted swags require Jabots or cascades on the ends
Board Charges, see page 20
Add-Ons - Swags
Interlining, labor & materials
–per swag
Item
Code
Item – Swags
Item Code
SUP-Inter
Per Foot
Center Pleat Swag
– add for
jabots/cascades
S-CenPl
40.00
Corner Pleat Swag
S-CornPl
40.00
Empire Swag
– w/ side legs
S-Emp
45.00
S-Neck
40.00
shown w/ optional
jabots –see add-ons
Necklace Swag
P a g e | 27
Illustration
Add:
36.00
Item
Code
Item – Swags
Open Rod Pocket
Swag
Open Tab Swag
Open Traditional
Swag
– For metal poles
add for Velcro
attachings
Petticoat Swag
Rod Pocket Swag
Scarf Swag, darted
– per lineal foot of
fabric
– per lineal foot
Per Foot
S-OpenRP
40.00
S-OpenTab
40.00
S-OpenTrad
40.00
S-Petti
40.00
S-RP
40.00
S-Scarfdart
30.00
P a g e | 28
Illustration
Item
Code
Item – Swags
Scarf Swag, flat
-Includes Folding
Shirred/Gathered
Swag
Per Foot
S-Scarfflat
30.00
S-Shir
40.00
Strapped Swag
S-Strap
–Includes side legs
Traditional Swag
Turban Swag
45.00
S-Trad
40.00
S-Turb
45.00
P a g e | 29
Illustration
WINDOW TREATMENTS - CASCADES
CASCADES – labor per each:
• Cascades must be self lined or contrast lined
• Specify face width, and short and long points
Add-ons - Cascades
Interlining, labor only –per cascade
Item – Cascades
Item
Code
Item Code
CUP-Inter
To
36”l
To
72”l
To
100”l
To
120”l
Double
Shirred
Cascade
C-DblShir
50.00
60.00
70.00
80.00
Double
Stacked
Cascade
C-DblStack
50.00
60.00
70.00
80.00
Double
Traditional
Cascade
C-DblTrad
50.00
60.00
70.00
80.00
C-Flap
50.00
60.00
70.00
80.00
C-Flare
50.00
60.00
70.00
80.00
Flap-over
Cascade
–per flap
(each flap is a separate
piece)
Flare Top
Cascade
P a g e | 30
Add:
8.30
Illustration
To
36”l
To
72”l
C-FlatSh
50.00
60.00
70.00
80.00
Rod Pocket
Cascade
C-RP
50.00
60.00
70.00
80.00
Shirred/Gathered
Cascade
C-Shir
50.00
60.00
70.00
80.00
Spiral
Cascade
– 45” max length
C-Spiral
50.00
60.00
Stacked
Cascade
C-Stack
50.00
60.00
Item – Cascades
Flat Shaped
Cascade
shown w/ optional ball
fringe –see add-ons
Item
Code
P a g e | 31
To
100”l
N/A
70.00
To
120”l
N/A
80.00
Illustration
Item – Cascades
Traditional
Cascade
Item
Code
C-Trad
To
36”l
To
72”l
50.00
60.00
P a g e | 32
To
100”l
70.00
To
120”l
80.00
Illustration
WINDOW TREATMENTS - JABOTS
JABOTS – labor per each:
• Jabots must be self lined or contrast lined
• Specify face width, and short and long points
Add-ons – Jabots
Interlining, labor only –per jabot
Item - Jabots
Item Code
JUP-Inter
Item
Code
Each
Cone/Rounded Jabot
J-Cone
50.00
Double Cone/Rounded Jabot
J-DblCone
75.00
Double Tie Jabot
J-DblTie
75.00
Flare Top Jabot
J-Flare
65.00
Flat, Shaped Jabot
– specify bottom shape
shown w/ optional tassel –see add-ons
J-FlatSh
50.00
P a g e | 33
Add:
25.00
Illustration
Item - Jabots
Item
Code
Each
Inverted Cone/Rounded Jabot
J-InvCone
50.00
Inverted Tie Jabot
J-InvTie
50.00
Tie Jabot
J-Tie
50.00
P a g e | 34
Illustration
WINDOW TREATMENTS – CORNICE BOARDS, LAMBREQUINS
UPHOLSTERED CORNICE BOARDS AND LAMBREQUINS –
labor per lineal foot-- 5' minimum per Cornice
• Includes frame and foam
• Add returns to face width and round up for lineal foot cost
• For lambrequins, add side heights to face width and round up for lineal foot cost
• Send dimensional drawing or template for shaped boards
• Shaped cornices and lambrequins must have welt cord along the shaped edge
• Specify measurements for inside returns, face outside width and face (outside) heights
• For calculating yardage, add inside and outside of returns, plus 6” to the face width
• Railroading fabric recommended to eliminate seams
Add-ons – Cornice Boards and Lambrequins
Banding, Flat
–per lineal foot
Banding, Shirred
–per lineal foot
Cutout
–per cutout
Flat Inset behind Cutout
–per inset
Mitered Corners
–per corner
Padding – eXtra thick
–per lineal foot
Pleated Insert behind Cutout
–per insert
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Shaped Top w/ ¼” Welt Cord
–per lineal foot
Shirred Insert behind Cutout
–per insert
Item – Cornice Boards &
Lambrequins
Item
Code
Item Code
Band
BandSh
CBUP-Cutout
CBUP-Inset
CBUP-Miter
CBUP-Xtra
CBUP-PlInsert
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
CBUP-ShTop
CBUP-ShirIns
Per
Lineal
Foot
Flat Face
– Shaped Bottom
– w/ ¼” bottom welt cord, included
CB-FlatShw/
40.00
Flat Face
– Shaped Top & Bottom
– w/ ¼” welt cord, included
CB-ShapTB
57.00
P a g e | 35
Add:
6.00
15.00
26.00
25.00
26.00
9.00
20.00
3.50
3.75
4.50
7.00
8.00
15.00
35.00
Illustration
Item – Cornice Boards &
Lambrequins
Flat Face
– Straight Bottom
– no welt cord
Item
Code
Per
Lineal
Foot
CB-Flat-no
29.00
CB-Flat-w/
29.00
LB
57.00
CB-PleatSh-w/
60.00
CB-Pleat-w/
55.00
CB-ShirSh-w/
65.00
CB-Shir-w/
60.00
shown w/ optional shirred banding
–see add-ons
Flat Face
– Straight Bottom
– w/ ¼” bottom welt cord, included
shown w/ optional shirred inset and optional
top welt cord
–see add-ons
Lambrequin
– w/ Flat Face
– Shaped Bottom
– w/ ¼” welt cord, included
shown w/ optional outer ¼” welt cord
–see add-ons
Pleated Face
– Shaped Bottom
– w/ ¼” bottom welt cord
shown w/ optional top welt
–see add-ons
Pleated Face
– Straight Bottom
– w/ ¼” bottom welt cord, included
shown w/ optional jumbo welt cord
–see add-ons
Shirred Face
– Shaped Bottom
– w/ ¼” bottom welt cord, included
shown w/ optional bottom banding & top welt
–see add-ons
Shirred Face
– Straight Bottom
– w/ ¼” bottom welt cord, included
shown w/ optional top welt
–see add-ons
P a g e | 36
Illustration
WINDOW TREATMENTS - ROMAN SHADES
SHADES – labor per square foot:
• Shades are billed at a minimum of 9 square feet
• Specify right or left controls
• Price includes mounting board, does not include lining
• Outside mount recommended to eliminate light gaps
Add-ons – Shades
Item Code
Add:
Banding
–per lineal foot
Band
5.65
BlackOut lining - includes labor & lining –per square foot
SHUP-BO
3.00
Continuous Cord Lift System
–per each
–required for wide and/or long shades.
SHUP-CC
85.00
• Continuous Loop –up to 48” wide
–per each
SHUP-CC
95.00
• Continuous Loop –up to 72” wide
–per each
SHUP-CC
140.00
• Continuous Loop –up to 96” wide
–per each
Contrast Pleat Inset
–per inset
SHUP-ConPl
25.00
Lining -House Sateen –includes labor & lining
–per sq foot SHUP-Lining
1.25
Lining –BlackOut –includes labor & lining
–per sq foot SHUP-BO
3.00
Lining –Interlining –includes labor & interlining
–per sq foot SHUP-Inter
4.50
Metal Bead Chain
–per each
SHUP-Metal
12.00
Mini Flat Valance
–per lineal foot
SHUP-MiniVal
10.00
Oversized Shades -over 108” in width or length
SHUP-Over
20.00
Piece or Pillow Case Fabric
SHUP-Piece
20%
Return Flaps –to cover returns
–per pair
SHUP-Ret
12.35
Top Down, surcharge
–includes top valance
SHUP-TD
30%
Top Down Bottom Up, surcharge –includes top valance
SHUP-TdBu
35%
Reccomend Back Ribbed Style for TD-BU
Item - Shades
Item
Code
Unlined
Lined
Austrian
SH-Aust
16.00
21.00
Box Pleated Balloon
SH-BoxBal
13.00
15.00
P a g e | 37
Illustration
Item - Shades
Item
Code
Unlined
Lined
Box Pleated Balloon
– variation w/ Tails
SH-BoxBalTail
14.00
16.00
Center Pleat Relaxed Roman
SH-CenPl
12.00
14.00
Empire Balloon
– pleated
SH-EmpBalpl
N/A
30.00
Empire Balloon
– shirred
SH-EmpBalsh
N/A
30.00
Fan Bottom Shade
SH-Fan
12.00
P a g e | 38
14.00
Illustration
Item - Shades
Flat Ribbed Roman
Item
Code
Unlined
Lined
SH-FlatRib
16.00
19.00
shown w/ optional banding
–see add-ons
SH-Flat
12.00
14.00
Back or Front Pleat Roman
SH-FrPleat
13.00
15.00
Hobbled Roman
SH-Hob
16.00
20.00
London Shade
– w/ tails
SH-London
12.00
14.00
Flat Roman
P a g e | 39
Illustration
Item - Shades
Relaxed Flat Roman
– specify if permanent pleats
desired at bottom,
Item
Code
Unlined
Lined
SH-Rel
12.00
14.00
Shirred Balloon
SH-ShBal
25.00
30.00
Shirred Roman
SH-Shir
25.00
30.00
Smocked Balloon
SH-SmockBal
25.00
30.00
shown w/ optional Mini Flat
Valance –see add-ons
P a g e | 40
Illustration
BEDDING – BED COVERINGS
BED COVERINGS – labor per each:
BEDDING GUIDE:
• Actual mattress size required to fabricate bedding items.
• Add cost of lining and interling where applicable
• Standard bedspread sizes including 20” pillow tuck
• Standard coverlet sizes including 20” pillow tuck
• For crib sized items, deduct 30% from twin cost
• STANDARDS HAVE CHANGED, please measure exactly!
Mattress
Mattress
Standard
Standard
Size
Measurements
Bedspread
Coverlet
Twin
39”w x 75”l
81”w x 115”l
63”w x 107”l
Full
54”w x 75”l
96”w x 115”l
78”w x 107”l
Queen
60”w x 80”l
102”w x 121”l
84”w x 112”l
King
76”w x 80”l
118”w x121”l
102”w x 112”l
Cal King
72”w x 84”l
120”w x 115”l
96”w x 116”l
Duvet
Cover
68”w x 88”l
82”w x x88”l
88”w x 94”l
106”w x x94”l
102”w x x98”l
BED SCARFS
Add for embellishments, Flange, Lining, Interlining, Top Stitching etc.
Queen—88” x24”
BSQ
85.00
King 103” x x24
BSK
99.00
Add-ons – Bed Coverings
Add Interlining to unquilted bedding
–Labor only –add for cost of interlining
Banding at hem or mattress edge –per lineal foot
Bed Skirts
–per pair
Reverse Sham
–requires 3 yards fabric
Rounded Corners
–per pair
Ruffle
–per lineal foot, finished
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Sewn-in Fitted bottom corner
–per coverlet
Split corners w/ gussets
–per pair
Split corners w/o gussets
–per pair
Top Stitch
-per foot
P a g e | 41
Item Code
Add:
BCUP-Inter
50.00
Band
BCUP-Gus
BCUP-Rev
BCUP-Round
Ruffle
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
BCUP-SewnFit
BCUP-Split w/
BCUP-Split w/o
TopStich
6.00
45.00
55.00
25.00
9.00
3.50
3.75
4.50
7.00
8.00
45.00
90.00
45.00
4.00
Item – Bed
Coverings
Item
Code
Twin
Full
Queen
King
Duvet Cover
– zipper closure
– inner ties
BC-Duvet
129.00
139.00
159.00
189.00
Duvet Cover
– flap-over
button closure
– inner ties
BCDuvetFlap
149.00
169.00
199.00
230.00
BC-CvrUn
175.00
225.00
250.00
275.00
BC-Comf
350.00
450.00
500.00
550.00
Throw Coverlet
(covers mattress)
– unquilted
– includes
interlining or
10 oz. fill
-
Comforter
– machine or
hand tacked
– no pillowtuck
P a g e | 42
Illustration
Item – Bed
Coverings
Fitted-Tailored
Bedspread
– unquilted
shown w/ optional
mattress edge welt
– see add-ons
Item
Code
Twin
Full
Queen
King
BCFitSprd
Tail
265.00
+
extras
275.00
+
extras
295.00
+
extras
335.00
+
extras
BCFitSprd
Shir
350.00
375.00
425.00
475.00
BCSprdUn
225.00
235.00
255.00
295.00
BCSprdUn
225.00
+
extras
235.00
+
extras
255.00
+
extras
295.00
+
extras
BCSprdUn
225.00
+
extras
235.00
+
extras
255.00
+
extras
295.00
+
extras
Fitted-Shirred
Bedspread
– unquilted
– unlined shirred
skirt
shown w/ optional
mattress edge welt
– see add-ons
Throw
Bedspread
– unquilted
Throw
Bedspread
– unquilted
shown w/ optional
banding & shirred
jumbo welt
– see add-ons
Throw
Bedspread
– unquilted
– add cost for
interlining /fill
shown w/ opt ruffle
& ruffled reverse
sham – see add-ons
P a g e | 43
Illustration
Item – Bed
Coverings
Throw
Bedspread
– unquilted
shown w/ optional
waterfall corners &
banded reverse
sham
– see add-ons
Item
Code
Twin
Full
Queen
King
BCSprdUn
265.00
+
extras
275.00
+
extras
295.00
+
extras
335.00
+
extras
BCSprdUn
435.00
455.00
475.00
515.00
Throw
Bedspread
(drop to floor)
– unquilted
– includes
scalloped hem &
reverse sham
P a g e | 44
Illustration
BEDDING – BED SKIRT
BED SKIRT – labor per each:
• Lining for platform is included
• Add for lining on skirt
• Specify split or non-split corners
• Specify finished drop and actual box spring size
BEDDING GUIDE:
• Actual mattress and box spring are needed to fabricate bedding items.
• For crib sized items, deduct 30% from twin cost
• STANDARDS HAVE CHANGED, please measure exactly!
Mattress
Size
Twin
Full
Queen
King
Cal King
Mattress
Measurements
39”w x 75”l
54”w x 75”l
60”w x 80”l
76”w x 80”l
72”w x 84”l
Add-ons – Bed skirt
Item Code
Velcro rather than lining platform
– includes Velcro on band and providing matching Velcro BSUP-Velcro
piece for attaching box spring or bed frame
Banding on platform
BSUP-BandPlat
Four(4)-sided Bed Skirt – add to appropriate size
BSUP-4side
Item –
Bed Skirt
Item
Code
Twin
Full
Queen
King
BS-Box-L
165.00
4.5y
185.00
5y
220.00
6y
240.00
6y
BS-Box-U
155.00
160.00
200.00
220.00
Box pleat
– Lined
(approx 5”
spaces, pleats)
– includes
split corners
– add for
gussets
-add for lining of
skirt
Box pleat
– Unlined
(approx 5”
spaces, pleats)
– includes
split corners
– add for
gussets
P a g e | 45
Illustration
Add:
85.00
55.00
25%
Item –
Bed Skirt
Item
Code
Twin
Full
Queen
King
BSInvBox-L
190.00
6y
205.00
7y
235.00
8y
255.00
8y
BSInvBox-U
175.00
190.00
215.00
240.00
Shirred
– Lined
-add for
lining of
skirt
BS-Shir-L
175.00
6y
205.00
7y
235.00
8y
255.00
8y
Shirred
– Unlined
BS-Shir-U
133.90
190.00
215.00
240.00
Tailored
– Lined
-add for
lining of
skirt
BS-Tail-L
160.00
3.5y
180.00
4y
215.00
5y
235.00
5y
Tailored
– Unlined
BS-Tail-U
150.00
165.00
195.00
215.00
Inverted
Box pleat
– Lined
– add for
lining of skirt
shown w/
optional banded
platform
–see add-ons
Inverted
Box pleat
– Unlined
shown w/
optional banded
platform
–see add-ons
P a g e | 46
Illustration
BEDDING – PILLOW SHAMS
PILLOW SHAMS – labor per each:
• Standard Sizes:
o Twin/Full 20”h x 26”w
o Queen
20”h x 30”w
o King
20”h x 36”w
o Euro
26”h x 26”w
• Includes overlap closure in back or zipper, please specify
• Sham cover only, please add for pillow sham insert
Add-ons – Pillow Shams
Button & Buttonhole (not covered buttons)
Item Code
–per set
Button&Hole
Add:
10.00
COM Trim
–per lineal foot
COMTrim
3.65
COM Trims – Hand Sewn
–per lineal foot
HandSewTrim
15.00
Double Ruffle
–per lineal foot, finished
PSUP-DblRuf
18.00
Interlining, labor and material
–per sham-per side
PSUP-Inter
14.00
Knotted Corner w/ ½” self-welt
–plus cost of self-welt
–each
PSUP-Knot
15.00
9.00
3.50
3.75
4.50
7.00
8.00
10.00
Ruffle
Self-welt, Micro Welt
Self-welt, ¼” (cover & insert)
Self-welt, ½” (cover & insert)
Self-welt, ¾” (cover & insert)
Self-welt, 1” (cover & insert)
Shirred welt, ½”
–per lineal foot, finished
–per lineal foot
–per lineal foot
–per lineal foot
–per lineal foot
–per lineal foot
–per lineal foot
Ruffle
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
ShirWelt
Tassels applied
–per tassel
Tassels
Item – Pillow Shams
Envelope
– includes covered
button
Item
Code
PS-Env
Twin,
Full
69.00
Queen,
Euro
79.00
shown w/ optional ruffle
–see add-ons
P a g e | 47
King
89.00
5.00
Illustration
Item – Pillow Shams
Flanged Edge
– no welt cord
– no miters
Item
Code
Twin,
Full
Queen,
Euro
King
PS-Flg
79.00
89.00
99.00
Knife Edge
– Add for COM
cord
or covered welt
PS-Knife
38.00
43.00
48.00
Knotted Corner
Sham
-Including welt
PS-Knot
129.00
149.00
157.00
Mitered edge flange
– w/ welt between
face & flange
PSMiterFlgWelt
95.00
115.00
125.00
108.00
122.00
130.00
69.00
79.00
89.00
– includes napped lining
– includes napped lining
Ruffled Sham
PS-Ruffle
Sash Overlay Sham
PS-Sash
P a g e | 48
Illustration
Item – Pillow Shams
Item
Code
Seamed Front
– w/ welt/trim @
face
& edges
PS-SeamFr
Shirred Welt Sham
PS-ShirWelt
Twin,
Full
79.00
112.00
Queen,
Euro
King
85.00
105.00
129.00
140.00
P a g e | 49
Illustration
BEDDING – UPHOLSTERED HEADBOARDS
UPHOLSTERED HEADBOARDS – labor per each:
• Specify ALL dimensions or provide template
• Standard sizes:
o Twin
40”w x 44”h
o Full
55”w x 44”h
o Queen
61”w x 46”h
o King
77”w x 46”h
o CA King 73”w x 46”h
• Includes legs or wall mount fixture – Please specify
Item –
Upholstered
Headboards
Item
Code
Twin
Full
Queen
King
Padded Roll
– no shirring
UH-PadRoll
330.00
470.00
500.00
550.00
Plain
w/ ¼” welt
– no roll
UH-Plain
295.00
535.00
565.00
615.00
Shirred Face
w/ ¼” welt
– no roll
UH-Shir
350.00
495.00
525.00
575.00
Shirred Roll
UH-ShirRoll
350.00
495.00
525.00
575.00
Shaped w/
Welt
UH-Shpw/
350.00
495.00
585.00
575.00
P a g e | 50
Illustration
ACCESSORIES – THROW PILLOWS
THROW PILLOWS – labor per each:
• Pillow cover only – please add for pillow forms, see Pillow Form Price List
• Pillow covers include zipper closure
Add-ons – Throw Pillows
Buttons Covered & Sewn on
–each
COM Trim
–per lineal foot
COM Trims – Hand Sewn
–per lineal foot
Difficult Fabric-Velvet, Lace, etc. –add to job
Double Ruffle
–per lineal foot finished
Knotted Corner w/ ½” self-welt
–per each
Round Shaped Corners – add to knife edge per pillow
Ruffle
–per lineal foot finished
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Shirred ½” welt cord
–per lineal foot
Tassels applied
–per tassel
Item – Throw Pillows
Item
Code
Item Code
ButtonCovSew
PSUP-COMTrim
PSUP-HandSewTrim
Diff
TPUP-DblRuf
TPUP-Knot
TPUP-Round
Ruffle
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
TPUP-Shirw 1/2
Tassels
To 18”
To 24”
To 36”
Beachball
TP-Beach
N/A
N/A
125.00
Button Over
-includes 4 buttons &
button holes
TP-Button
75.00
80.00
86.00
P a g e | 51
Add:
10.00
3.65
15.00
35%
18.00
10.00
15.00
9.00
3.50
3.75
4.50
7.00
8.00
10.00
5.00
Illustration
Item – Throw Pillows
Item
Code
To 18”
To 24”
To 36”
TP-Env
49.00
59.00
69.00
TP-Flg
48.00
53.00
67.00
TP-Knife
35.00
40.00
TP-KnifeW
56.00
65.00
82.00
TP-Round
63.00
75.00
89.00
Envelope
– includes covered
Button, sewn on
shown w/ optional welt
–see add-ons
Flanged Edge
– no welt cord
– not mitered
–self flange
Knife Edge
– no trim or welt
Knife Edge
–includes 1/4” self
welt or COM trim
Knife Edge, Round
– incudes COM trim or
1/4” self welt
P a g e | 52
46.00
Illustration
Item – Throw Pillows
Knife Edge
with double ruffle
Knife Edge
Selfwelt w/ knotted corners
Knife Edge
w/ ruffle
Item
Code
To 18”
To 24”
To 36”
TP-Knife DR
125.00
160.00
226.00
TP-Knife Kn
96.00
104.00
122.00
TP-KnifeR
89.00
112.00
154.00
TP-KnifeSsh
71.00
84.00
102.00
TP-KnifeSw
95.00
120.00
165.00
79.00
89.00
99.00
Knife Edge
w/ sash overlay
shown w/ 1/4” welt
Knife Edge
shown w/
shirred welt
Knife Edge
w/ Turkish corners
shown w/ optional welt
–see add-ons
TP-KnifeTurk
P a g e | 53
Illustration
Item – Throw Pillows
Knife Edge
w/ welt and tassels
Mitered Flange Edge
shown w/ optional welt
cord in between
–see add-ons
Item
Code
To 18”
To 24”
To 36”
TP-Knife
76.00
84.00
102.00
TPMiterFlgwelt
79.00
89.00
99.00
TP-Neck
62.00
68.00
75.00
Neckroll
– includes 1/4” welt cord,
–add for button, ruffle
–see add-ons
Signature
– includes labor for trim at
seams and ends
Sunburst Round
– includes ¼” self-welt
& covered buttons
Tootsie Roll
Neckroll
TP-SDG
65.00
75.00
85.00
TP-Sun
80.00
105.00
-----
TP-Toot
45.00
49.00
55.00
P a g e | 54
Illustration
Item – Throw Pillows
Boxed
Item
Code
To 18”
To 24”
To 36”
– no welt
TP-Box
64.00
85.00
127.00
Boxed
TP-BoxW
95.00
135.00
195.00
137.00
182.00
235.00
--with welt
Shirred Box
– with welts
TP-ShirBox
P a g e | 55
Illustration
ACCESSORIES – PILLOW FORMS
We stock 50/50 Pillow Forms:
45% duck feather, 5% duck down/50% cluster fiber
AKA: Touch Down
FOR ALL OTHER PILLOW FORMS – Call for quote.
Angel Hair-Fiber Fill- Soft like down
10/90 Down/Feather
Due to constant price increases by manufacturers
see our Pillow Forms prices listed separately.
P a g e | 56
ACCESSORIES – CUSHIONS, NEW AND RECOVER EXISTING
CUSHIONS – labor per lineal foot unless specified otherwise:
• Measure widest front or back width (or side to side) for lineal foot pricing
• To 24” deep (front to back or side to side)
• New cushions include 2” high resiliency foam w/ dacron wrap and zipper closure
• Build-up, dacron wrap on existing cushions not included
Add-ons – Cushions– Bench, Chair,
Wicker & Window Seat
3” High Resiliency Foam
–per lineal foot
4” High Resiliency Foam
–per lineal foot
6” High Resiliency Foam
–per lineal foot
Buttons, Covered & Sewn on
–per each
Cushions Over 24” deep
–per lineal foot
Dacron Wrap on existing cushions
–per lineal foot
Non-rectangular shapes
–per foot
Ties
–per tie
Velcro Ties
- per tie
Item – Cushions-Bench,
Chair, Wicker &
Window Seat
Item
Code
Item Code
CNUP-3HRFoam
CNUP-4HRFoam
CNUP-6HRFoam
ButtonCovSew
CNUP-Over24
Dacron
CNUP-Nonrect
CNUP-Ties
CNUP-TiesV
Recover
Existing
Cushion
New
Cushion
Boxed Welted Edge
w/ zipper
Per foot
CN-BoxWelt
32.00
38.00
Boxed Non-welted Edge
w/ zipper
CN-Box
25.00
31.00
P a g e | 57
Illustration
Add:
8.00
10.00
14.00
10.00
8.00
6.00
5.00
10.00
18.00
Item – Cushions-Bench,
Chair, Wicker &
Window Seat
Item
Code
Recover
Existing
Cushion
New
Cushion
D Seat Cushions
-per foot
CN-DSeat
43.00
59.00
Knife Edge Back Cushions
– includes Dacron stuffing
(no foam)
– add for buttons
-per foot
CN-Knife
24.00
28.00
Single Welted Edge
-w/ zipper
-per foot
CN-Singwelt
29.00
35.00
Illustration
ACCESSORIES – BOLSTERS
BOLSTERS – labor per lineal inch:
• Measure widest width for lineal inch pricing
• Includes zipper
Add-ons – Bolsters
Shirred, Round Ends w/ Covered Button
Item – Bolsters
Item
Code
Item Code
BUP-ShirEnd
Per lineal
inch
Round
– Welted, 6” & 8”
– per lineal inch
B-RoundWelt
5.00
Wedge
– Welted
– per lineal inch
B-WedgeWelt
5.50
P a g e | 58
Illustration
Add:
20.60
ACCESSORIES – CHAIR PADS
CHAIR PADS – labor per each:
• Template required
• Includes 1” or 2” foam, wrapped in Dacron.
Add-ons – Chair Pads
Covered Button, sewn on
–per each
Tie
–per tie
Item – Chair Pads
Item Code
ButtonCovSew
CPUP-Tie
Item
Code
1” Foam 2” Foam
Boxed
– ¼” Welted Edge
– w/ high density foam &
Dacron
CP-BoxWelt
85.00
95.00
Knife Edge
– w/ high density foam &
Dacron
CP-Knife
60.00
70.00
160.00
175.00
79.00
89.00
–Includes ties
Shirred Box
– ¼” Welted Edge
– w/ high density foam &
Dacron
CP-ShirBoxWelt
Single
– ¼” welted Edge
– w/ high density foam &
Dacron
CP-SingWelt
–Includes ties
P a g e | 59
Add:
7.75
3.10
Illustration
ACCESSORIES – REUPHOLSTER BENCH AND CHAIR CUSHIONS
REUPHOLSTER CHAIR AND BENCH SEATS – labor as specified:
• New foam, build-up, or Dacron wrap on existing seats not included – see add-ons & extras
• Repair of seat or bench wood base not included
Item
Code
Item – Reupholster Bench & Chair Cushions
Recover Bench Cushion
–per lineal foot
Recover Bench Cushion w/ ¼” Bottom Welt
–per lineal foot
Recover Bench Cushion w/ Boxing & ¼” Welt
–per lineal foot
Recover Dining Room Chair w/ ¼” Bottom Welt
–per each
Recover Dining Room Chair w/ Boxing, ¼” Welt
–per each
Recover Dining Room Chairs, no welt
–per each
No
Tear-apart
w/
Tear-apart
BS-Reuph
26.00
34.00
BS-ReuphWelt
30.00
38.00
BS-ReuphBoxWelt
37.00
45.00
DC-ReuphWelt
40.00
48.00
DC-ReuphBoxWelt
48.00
56.00
DC-Reuph
35.00
45.00
P a g e | 60
ACCESSORIES – TABLE ACCESSORIES
TABLE ACCESSORIES – labor per each, unless specified otherwise:
Item
Code
Item – Table Accessories
Unlined
Lined
Box Pleated Drop Tablecloth
– per width around skirt
– plus lining
–add for optional welt
TA-BoxCloth
80.00
95.00
TA-Napkin
19.00
---
TA-PlaceOval
---
32.00
TA-PlaceRect
---
35.00
TA-ShirCloth
80.00
95.00
–
Napkins
w/ narrow rolled hem
Placemats
– oval or octagonal
– add $8 each for interlining
–add for lining
Placemats
– rectangular
– add $8 each for interlining
shown w/ optional banding
–add for lining
– see add-ons
Shirred Drop Tablecloth
– per width
–add for optional welt
P a g e | 61
Illustration
Item – Table Accessories
Item
Code
Unlined
Lined
Table Runner
– per foot
– add cost of lining
–add for interlining
shown w/ optional tablecloth
–see add-ons for embellishments
TA-Runner
8.00
10.00
TA-Cloth1
40.00
55.00
TA-Cloth2
35.00
50.00
Tablecloth
– round or square
– per width
– add cost of lining
Tablecloth
– round or square
– per width
– add cost of lining
P a g e | 62
Illustration
ADD-ONS AND EXTRAS
ADD-ONS AND EXTRAS – labor as specified:
Item – Add-Ons & Extras
Banding
Banding, shirred
BlackOut Lining –labor only
o Drapery Panels
o Shades -includes labor & lining
o Valances on Boards
o Valances on Rods, Knobs, Poles
Buttonhole
Buttons hand sewn on only
Buttons Covered
Button & Buttonhole
Buttons Covered & Sewn on
COM Trim
COM Trims – Hand Sewn
Contrast Rod Pockets or headings
Cover Wood Brackets
Cover Wood Poles
Custom work for unusual treatments
Cut-outs in bottom
(to allow for air conditioners, beams, etc)
Cut-outs in top
(to allow for air conditioners, beams, etc)
Dacron Wrap on cushions
Difficult Fabric – velvet, linen, lace, casement etc.
Foam – High Resiliency
o 1” x 24”
–per foot
o 2” x 24”
–per foot
o 3” x 24”
–per foot
o 4” x 24”
–per foot
o 5” x 24”
–per foot
o 6” x 24”
–per foot
Folding only
–per width
Item Code
–per lineal foot
–per lineal foot
–per width
–per square foot
–per foot
–per width
–each
–each
–each
–per button/hole
–each
–per lineal foot
–per lineal foot
–per width
–each
–per lineal foot
–per hour
–each
–each
–per foot
–add to job
P a g e | 63
Add:
Band
BandSh
6.00
15.00
DPUP-BO
SHUP-BO
VBUP-BO
VRUP-BO
Buttonhole
ButtonSew
ButtonCov
Button&Hole
ButtonCovSew
COMTrim
HandSewTrim
ConRP
CovBrack
CovPole
Custom
6.00
3.00
2.00
6.00
5.00
5.00
5.00
10.00
10.00
3.65
7.00
10.00
20.00
5.00
55.00
CutOutBot
55.00
CutOutTop
60.00
Dacron
Diff
9.00
35%
1HRFoam
2HRFoam
3HRFoam
4HRFoam
5HRFoam
6HRFoam
Fold
4.00
6.00
8.00
10.00
14.00
14.00
14.00
Item – Add-Ons & Extras
Grommets – includes grommet & setting
– call for finishes available
o Up to ½” inside diameter
–per each
o ¾” inside diameter
–per each
o 1 1/8” inside diameter
–per each
o 1 7/16” inside diameter
–per each
o 2 ¾” inside diameter (plastic-fits 2” PVC pipe) –per each
Hand Sew Hems
–bottom or sides
–per foot
Interlining – labor only
o Cascades
–per cascade-labor & materials
o Drapery Panels –per width
o Jabots
–per jabot-labor & materials
o Pillow Shams
–per sham-per side-labor & materials
o Shades
–per square foot-labor & materials
o Swags
–per swag-labor & materials
o Valances
–per width-per foot
Knotted & Draped Cord, arrange on treatment –per foot of cord
Miter Boards
–per miter/corner
Notch Boards
–per notch
Pick-Up or Delivery
–per hour
Pattern Drafting for custom job
–per hour
Piece or Pillow Case, sides or bottoms
–surcharge
Pleated Ruffle
–per finished foot
Pressing only
–per width
Rings – hand sewn
–per each
Rosette
-per each
Ruffle
–per lineal foot finished
Rush orders – add to job
Self-welt, Micro Welt
–per lineal foot
Self-welt, ¼” (cover & insert)
–per lineal foot
Self-welt, ½” (cover & insert)
–per lineal foot
Self-welt, ¾” (cover & insert)
–per lineal foot
Self-welt, 1” (cover & insert)
–per lineal foot
Seaming -Horizontal Seams on drapery panels –per width
Serging only
–per yard
Shaped mounting board (w/ profile)
–per lineal foot
Sheets – includes pressing & cutting
–per sheet used
Shirred ½” welt cord (cover & insert)
–per lineal foot
Shirred 1” welt cord (cover & insert)
–per lineal foot
P a g e | 64
Item Code
Add:
Grom 1/2
Grom 3/4
Grom 1 1/8
Grom 1 7/16
Grom 2 3/4
HSHem
2.55
3.35
4.65
6.70
7.75
6.00
CUP-Inter
DPUP-Inter
JUP-Inter
PSUP-Inter
SHUP-Inter
SUP-Inter
VBUP-Inter
Cord
Miter
Notch
PU/Del
PatDraft
Piece
PlRuf
Press
Ring
Rosette
Ruffle
Rush
SWeltMicro
SWelt 1/4
SWelt 1/2
SWelt 3/4
SWelt 1
Seam
Serge
Shape
Sheet
ShirWelt 1/2
ShirWelt 1
30.00
12.00
25.00
14.00
4.50
36.00
3.00
2.00
15.45
10.30
20.60
66.95
20%
10.00
13.00
3.10
35.00
9.00
35%
3.50
3.75
4.50
7.00
8.00
15.00
2.60
30%
15.45
12.00
8.30
Item – Add-Ons & Extras
Stainless Steel Drapery Pins for flame retardant fabrics –per pin
Tie added to treatments
–per tie
Tie w/Velcro
Tassels applied
–per tassel
Top Stitch
–per foot, top
Velcro –sewn on Velcro, includes labor
–per lineal foot
Velcro –material only –standard velcro
–per yard
Velcro –material only –pressure sensitive
–per yard
P a g e | 65
Item Code
SSPins
Tie
TieV
Tassel
TopStitch
Velcro
VelcroStand
VelcroPresOn
Add:
.21
10.00
18.00
5.00
4.00
8.00
18.00
18.00
ADDITIONAL SERVICES – ALTERATIONS, REMAKES
ALTERATIONS AND REMAKES – labor per hour:
• All items must be dry-cleaned (by state law) before work can begin
•
•
•
Existing crease lines will likely remain visible, even after pressing
Exact quotes will not be given, charges may vary from any estimate given
1 hour minimum per service
Item – Alterations & Remakes
Item Code
Alter or remake existing treatment
–per hour
Minimum Rework Fee
Make Pair into Panel (includes repleating) –per seam
Make Pair into Panel (includes repleating) –per seam
Make panel into Pair (includes repleating) 2 widths –Unlined
Make panel into Pair (includes repleating) 2 widths –Lined
Pieced Hem or Header
–per width
Rehem Lengthen/Shorten
–per hour
Repin
–per width
Repleat Treatment –per hour
Folding only
–per width
Pressing only
–per width
Alt-Remake
Alt-Min
Alt-Pr –U
Alt-Pr –L
Alt-Pn –U
Alt-Pn –L
Alt-PieceHem
Alt-Hem
Alt-Pin
Alt-Plt
Alt-Fold
Alt-Press
Reline treatment
Alt-Reline
Cost
50.00
50.00
50.00
60.00
50.00
60.00
10.00
50.00
5.00
50.00
10.00
15.00
Same as new treatment +
tear-apart per hour
ADDITIONAL SERVICES – MEASURING, CONSULTING
MEASURING AND CONSULTING – labor per hour:
Item – Measuring and Consulting
Measuring w/ or w/o designer –client’s home
Consulting w/ designer
–in shop
Calculating yardage/completing DE workorders
–per hour
–per hour
–per hour
P a g e | 66
Item Code
Msr
Conslt
Calc/WO
Cost:
80.00
50.00
50.00