tiger-mate® II - Centre Agricole.ca

yield-till system
®
S E E D B E D P R E PA R AT I O N
Case IH dealers are the standard for expert sales, service and support of the most technologically advanced equipment
in the world. They ’re committed to understanding your business and providing unique solutions to maximize your productivity.
From tractors to AFS precision farming technology, Case IH dealers offer a complete agricultural system. Coupled with
timely parts and service, and flexible financial solutions through Case Credit, Case IH dealers provide a total package to
ensure you’re always performing at your best.
But most importantly, Case IH dealers offer planning for the long-term growth of your business. By staying at the forefront
of agronomic issues and the cutting edge of technology, they help prepare you for tomorrow.
Whatever it takes, Case IH dealers are dedicated to helping your operation achieve
success season after season. Visit your Case IH dealer today to see the advantages of
worldwide leadership.
SAFETY NEVER HURTS!™ Always read the Operator’s Manual before
operating any equipment. Inspect equipment before using it, and be sure
it is operating properly. Follow the product safety signs, and use any safety
features provided.
CNH America LLC reserves the right to make improvements in design and
changes in specifications at any time without notice and without incurring
any obligation to install them on units previously sold. Specifications,
descriptions and illustrative material herein are as accurate as known at
time of publication, but are subject to change without notice.
Case IH and Case Credit are registered trademarks of CNH America LLC
Any trademarks referred to herein, in association with goods and/or services of companies
other than CNH America LLC, are the property of those respective companies.
This literature has been published for worldwide circulation. Availability of
some models and equipment builds varies according to the country in
which the equipment is used.
AE-377091
Replaces: None
©2001-2004 CNH America LLC
All Rights Reserved
Printed in U.S.A.
www.caseih.com
SPECIFICATIONS
crumbler
tiger-mate II
GETTING OFF TO A GOOD START TODAY PUTS MORE MONEY IN YOUR POCKET TOMORROW
With every planting season you only have one
level seed bed with better seed-to-soil contact for
(ALS) or Advanced Conditioning System (ACS)
chance to build the perfect seed bed for your crops,
faster germination and uniform crop emergence
harrows (with or without the crumbler) to properly
and the seed bed preparation team of the Case IH
throughout the field.
distribute residue, size clods and firm the seed zone to
tiger-mate ® II and crumbler ® is the best way to make
the most of every
opportunity and improve
your Return On
Investment (ROI). As
illustrated at right, the
Case IH tiger-mate II
field cultivator and
crumbler create a firm,
Soybean
Emergence
Worked
Loose
Soil
Firm
Moist
Soil
How do I create the best seed bed for my
prepare the most effective seed bed for your crops. It
operation? Studying the seed bed
is also important to consider your soil type and
conditions – residue levels and
weather patterns when making your decision. Your
surface soil tilth – to determine
Case IH yield-till system dealer can help equip your
the right match of equipment for
tiger-mate II with the right seed bed finishing system
your seed bed preparation
to maximize your yields and ROI.
needs. The tiger-mate II can
be equipped with a number of
tiger-mate II Field Cultivator: The high performance choice for
Advanced Leveling System
high residue applications. Many seed bed conditioning options
are available to finish the seed bed for varying soils and field
conditions. (Shown with optional crumbler seed bed finisher.)
TABLE OF CONTENTS
tiger-mate II & crumbler agronomics ....................2-3
tiger-mate II features .............................................4-5
Advanced Leveling Systems (ALS) ...........................6-7
Advanced Conditioning Systems (ACS) ...................8-9
crumbler .................................................................10
Specifications ............................................................11
COVER PHOTO: The tiger-mate II and crumbler
make an excellent tillage team for seed bed preparation.
2
APPROX. TRANSPORT DIMENSIONS
FRAME TYPE WORKING WIDTH
MAINFRAME WIDTH WIDTH (MAX)*
Single-Fold: 18.5 to 28.5 ft. (5.6 to 8.7 m)
10.5 ft. (3.2 m)
13.9 ft. (4.2 m)
30.5 ft. (9.3 m)
10.5 ft. (3.2 m)
14.4 ft. (4.4 m)
30.5 to 32.5 ft. (9.3 to 9.9 m)
12.5 ft. (3.8 m)
15.9 ft. (4.8 m)
34.5 to 38.5 ft. (10.5 to 11.7 m) 14.5 ft. (4.4 m)
17.9 ft. (5.5 m)
HEIGHT (MAX)**
12.5 ft. (3.8 m)
14.5 ft. (4.4 m)
13.3 ft. (4.0 m)
15.1 ft. (4.6 m)
Double-Fold: 38.5 to 46.5 ft. (11.7 to 14.2 m)
48.5 to 50.5 ft. (14.8 to 15.4 m)
54.5 to 60.5 ft. (16.6 to 18.4 m)
13.5 ft. (4.1 m)
13.6 ft. (4.2 m)
15.6 ft. (4.7 m)
12.5 ft. (3.8 m)
14.5 ft. (4.4 m)
14.5 ft. (4.4 m)
16.9 ft. (5.2 m)
18.9 ft. (5.8 m)
18.9 ft. (5.8 m)
MAINFRAME
Industry-first bridge frame construction
Five ranks of 3 x 4 in. (76 x 102 mm) side-to-side and double 2 x 2 in. (51 x 51 mm) fore/aft structural members
Minimum rank spacing is 30 in. (76.2 cm)
SHANKS
Split-The-Middle sweep pattern
5/8 in. (15.9 mm) thick by 1-3/4 in. (44.5 mm) shanks
Minimum shank spacing is 6 in. (152 mm) with 24 in. (60 cm) center-to-center
Compression-spring design with 150 lbs. (68 kg) trip force and 14 in. (356 mm) trip height
MAINFRAME
Double-bar 4 x 4 in. (102 x 102 mm) members on mainframe and inner wings
Single-bar 4 x 4 in. (102 x 102 mm) on outer wings
AVAILABLE OPTIONS
Rear hitch to pull crumbler
Standard or Long Nose sweeps
Three Advanced Leveling System harrows available (3-bar coil tine, 4-bar tiger-tine and 5-bar spike tooth)
Two Advanced Conditioning Systems available (ACS Round and ACS Flat)
REELS
14 in. (356 mm) diameter with 10 solid 7/8 in. (22.2 mm) bars
Spring-cushioned with approximately 110 lbs. (49.9 kg) of ground pressure
HYDRAULICS
One lift circuit operates both wing-fold and transport cylinders and fittings; ISO tips
TRANSPORT TIRES
9.5 L x 15 8-Ply tubeless rib implement tires
OPERATING GUIDELINES
Vary with soil conditions
Requires approximately 4 to 7 pto horsepower per foot or 2 to 3.5 pto horsepower per shank
Recommended operating speed is 5.5 mph (8.8 km/m) to 8 mph (12.8 km/m)
** To outermost shank
** Without harrows (Transport height and width may vary with harrows and are approximates.)
OPERATING GUIDELINES
Vary with soil conditions
Requires approximately 1 pto horsepower per foot
Recommended operating speed is 5 mph (8.05 km/m) to 8 mph (12.87 km/m)
Advanced Leveling Systems (ALS) Harrows
4-bar tiger-tine
4
16 in. (41 cm)
7/16 in. (11.1 mm)
8 in. (203 mm)
2 in. (51 mm)
3-position adjustment
HEIGHT (MAX)**
4.5 ft. (1.4 m)
4.5 ft. (1.4 m)
7 ft. (2.1 m)
8 ft. (2.4 m)
8 ft. (2.4 m)
11 ft. (3.4 m)
10 ft. (3.0 m)
10 ft. (3.0 m)
9.5 ft. (2.9 m)
9.5 ft. (2.9 m)
12 ft. (3.7 m)
9.5 ft. (2.9 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
14.5 ft. (4.4 m)
HITCH
Telescoping tongue shortens for transport and storage
Tongue lengths vary depending on working width and frame configuration
DEPTH CONTROL SYSTEM
Positive mechanical crank adjustment turnbuckle for fore/aft levelness with depth indicator
Convenient, wrench-free adjustment from the front bar
3-bar Coil Tine
3
16 in. (41 cm)
7/16 in. (11.1 mm)
7.5 in. (191 mm)
2.5 in. (64 mm)
5-position adjustment
Single-Fold:
Double-Fold:
HITCH
Self-Leveling hitch with turnbuckle adjustment
Swinging hose stand with operator’s manual storage
Combination single and double clevis
RANKS:
SPIKE/TINE LENGTH:
SPIKE/TINE DIAMETER:
SPIKE/TINE SPACING:
EFFECTIVE SPIKE/TINE SPACING:
TINE ANGLE ADJUSTMENT:
FRAME TYPE
Rigid:
APPROX. TRANSPORT DIMENSIONS
WORKING WIDTH
MAINFRAME WIDTH
WIDTH (MAX)*
12.5 ft. (3.8 m)
12.5 ft. (3.8 m)
5.5 ft. (4.7 m)
15 ft. (4.6 m)
15 ft. (4.6 m)
15.5 ft. (4.7 m)
18 ft. (5.5 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
20 ft. (6.1 m)
22.5 ft. (6.9 m)
12.5 ft. (3.8 m)
15.5 ft. (4.7 m)
25 ft. (7.6 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
27.5 ft. (8.4 m)
12.5 ft. (3.8 m)
15.5 ft. (4.7 m)
30 ft. (9.1 m)
15 ft. (4.6 m)
18 ft. (5.5 m)
30 ft. (9.1 m)
10 ft. (3.0 m)
16 ft. (4.9 m)
32.5 ft. (9.9 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
35 ft. (1.7 m) Narrow
15 ft. (4.6 m)
16 ft. (4.9 m)
35 ft. (1.7 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
37.5 ft. (11.4 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
40 ft. (12.2 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
42.5 ft. (13.0 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
45 ft. (13.7 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
50 ft. (15.2 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
5-bar Spike Tooth
5
11 in. (279 mm)
3/4 in. (19.1 mm)
7.5 in. (191 mm)
1.5 in. (38 mm)
Advanced Conditioning Systems (ACS)
RANKS:
RANK SPACING:
TINE LENGTH:
TINE DIAMETER:
EFFECTIVE TINE SPACING:
TINE ANGLE ADJUSTMENT:
2 ranks of tines
15 in. (381 mm)
16 in. (41 cm)
7/16 in. (11.1 mm)
4 in. (102 mm)
5˚, 20˚, or 35˚
LENGTH (FRONT TO BACK): 77 in. (196 cm)
BASKET DIAMETER:
14 in. (356 mm)
FLAT BAR SIZE:
1/4 x 1.25 in. (6.4 x 31.8 mm)
ROUND TUBE SIZE:
7/8 in. (22.2 mm) diameter
hollow tubes
BASKET DOWN PRESSURE: 60-80 lbs. (27.2-36.3 kg)
11
THE FINISHING TOUCH TO THE PERFECT SEED BED
PREPARES A SEED BED THAT CREATES FASTER, UNIFORM EMERGENCE
crumbler ®
IMPROVED SOIL TILTH FOR BETTER SEED BED CONDITIONS
SEED BED FINISHER
Maximize your crop’s yield potential, lower your input
tiger-mate II to form an incredibly effective tillage team.
The crumbler breaks up surface clods and creates a
costs and put more money in your pocket!
The crumbler also provides weed and erosion
control by knocking soil off old root crowns and roots
coarse soil. This results in a firm seed bed for precise
of existing weeds, leaving roots exposed. The final
seed-to-soil contact with a valuable moisture barrier
result is a soil surface that resists crusting and lessens
of fine soil.
wind and water erosion. The bottom line? Increased
Combine 4 Passes into 1! The Case IH
yields! There are 17 sizes available from 12.5 ft.
into one... cultivate, incorporate, level and firm.
This final tune-up creates an
excellent seed bed of firm, fine
soil covered by loose, coarse
soil. The crumbler firms soil to
reduce air pockets and moisture
evaporation and enhances
COARSE SOIL
ON TOP
(3.8 m) to 50 ft. (15.2 m) to match with an appropriatesized tiger-mate II.
Double-Fold
Transport Position
▲
seed bed of firm, fine soil that is covered by loose,
tiger-mate II and crumbler combine four passes
Creating the perfect seed bed is the key to
Proper seed bed preparation helps warm the soil,
Telescoping Tongue
Matches to implement widths for
tight turning in the field and shortens
for transport and storage.
The SMS design also assures
improving your crop’s chances at maximizing its yield
allowing it to dry-down quicker, for earlier planting and
even tracking and uniform sweep
potential. With the Case IH tiger-mate II and crumbler
a longer growing season. See the positive effects of an
wear by evenly loading both
working for you in the spring, you will create greater
early start in the chart below.
sides of each
surface soil tilth with proper pore and soil aggregate
Through its Split-the-Middle Sweep (SMS)
pattern and 6 in. (152 mm) shank spacing, the
size and distribution within the seed zone.
▲
The Case IH crumbler combines with the
PLANTING TIME
EMERGENCE
GRAIN YIELD (% OF MAX)
NO DELAY
ALL EARLY (MAY 1)
100
MEDIUM DELAY
ALL MEDIUM
(1-1/2 WEEKS AFTER EARLY)
3/4 EARLY, 1/4 MEDIUM
95
ALL LATE
(3 WEEKS AFTER EARLY)
3/4 EARLY, 1/4 LATE
88
90
3/4 EARLY, 1/4 MISSING
90
LATE DELAY
SOIL FINES IN
THE SEED ZONE
STAND LOSS
94
1. Corn planted later with
uniform emergence
compares to corn planted
earlier with uneven
emergence
2. Late emerging plants
contribute no more yield
than missing plants
Source: NCH-36 Carter, Natziger, Hicks
sweep, which
prepares a
tiger-mate II thoroughly mixes
level seed bed
organic matter with the soil and
for uniform
incorporates nutrients evenly,
emergence.
reducing “hot spots” that can
The first three
burn the roots of young seedlings.
rows of shanks
This tillage also mixes herbicides,
take a full cut through the soil, and the fourth and fifth
carried over from past crops,
rows cut out the middles. Soil, residue and chemicals are
deeper into the soil, minimizing
mixed and spread uniformly across the width of the unit
their effect on the newly
and throughout the tillage depth. See the positive effect
planted seeds.
of uniform emergence in the chart to the left.
uniform chemical incorporation
and reduces “hot spots.”
CROP RESIDUE MANAGEMENT FOR IMPROVED PRODUCTIVITY
Built to withstand higher residue and large-acreage
Depending on your residue management
operations, the tiger-mate II has exceptional residue
requirements, the Case IH tiger-mate II can be outfitted
flow and uniform distribution. The shanks are spaced on
with one of several different seed bed finishing systems.
a true 5-rank frame with no shanks closer than 24 in.
The tiger-tine™ harrow, for example, has exceptional
(61 cm) from center-to-center. This provides ample room,
leveling characteristics, while handling heavy residue
even around the walking-tandem wheels, to minimize
without bunching or allowing clumped residue to drag.
plugging and enhance the productivity of the machine.
See pages 6-9 for the different harrow options for the
Its large, 5.90 x 15, 4-ply stabilizer wheels are used to
Case IH tiger-mate II.
keep the machine at peak performance over the
10
roughest terrain.
3
CUSTOMIZE YOUR FIELD FINISH TO ENHANCE THE SEED BED
DESIGNED FOR HIGH-SPEED, HIGHLY PRODUCTIVE FARMING
tiger-mate® II
The ACS Round is used for
moderate clod sizing and
seed bed firming. Round rods
Case IH Advanced Conditioning Systems
create smooth, level seed bed for easier planting and
crush clods, firm soil fines and
consistent holding power in extreme conditions. This
load evenly throughout the entire machine to the double
yield-till system. The Case IH tiger-mate II seed bed
allows for greater operating speeds to increase your
bushings that are used at the shank pivot and spring
increase your profit potential two ways: by improving
early, uniform emergence. You will also enhance uniform
preparation machine was designed to increase the yield
productivity and get your crops planted faster. But there’s
slide area, we have significantly reduced major stress
seed bed conditions, and thereby yields, and by
chemical incorporation, thereby reducing “hot spots.”
dimensions as the industry-
potential of every plant, while enhancing and simplifying
more... compression springs are used so they cannot be
areas for longer life and increased productivity.
increasing operator efficiency. Like the Case IH
Additionally, an ACS Round or Flat kills weeds by
leading Case IH crumbler®,
its operation, increasing its productivity potential.
stretched out of shape. The standard 14 in. (356 mm)
tiger -tine harrow, these systems have no depth or
knocking soil off old root crowns and roots of existing
level adjustments. Just drop the cultivator and go!
weeds, further reducing your chemical costs and
Helping Plants Thrive through the
The little extras that add up. To further
leave protective larger clods
on top. This unit has the same
only with hollow rods.
trip height allows the sweeps to clear virtually every
increase productivity, we also included a few extras
significant key to a level seed bed is keeping the
obstruction, and the “clamp style” mounts with
that will get the job done faster and safer. All leveling
cultivator in the ground. Although it seems simple,
positive stops keep the sweeps in position for a level,
adjustments are made at the front of the machine, with
excellent seed bed finishing
some of the slight differences in the tiger-mate II over
uniform bed.
no wrenches needed. The easy-to-use transport locks flip
in mellow or sandy soils
Accurate depth. Precision performance. A
competitive, look-a-like models create the precision
Robust reliability. You demand reliability, and
No matter which ACS model you choose, you will
increasing your ROI!
and works best in dry to
up for secure transport. And, an optional rear hitch is
performance to make it happen. For example, every
the tiger-mate II is proven in this category as well.
available for quick and easy attachment of the optional
shank has 150 lbs. (68 kg) of trip force to provide
From its industry-first hitch design that spreads draft
crumbler seed bed finisher.
The ACS Round provides
BUILT FOR PERFORMANCE
moderately wet conditions.
It can be run in wetter
conditions than the crumbler .
A.
2-bar coil tine harrow is indexed to the rear shanks of
the cultivator to effectively level the soil and distribute
The ACS Flat is the choice for
When equipped with the ACS Flat, the tiger-mate II effectively
residue before the baskets. The parallel linkage
aggressive clod sizing without
cultivates, manages residue and sizes clods for a seed bed
eliminates depth adjustments.
firming. Knife-like blades cut
clods and throw soil and
residue. All down pressure
B.
No tools are needed to adjust tine angle for a
is concentrated on cutting
customized field finish.
action. The aggressive soil
throwing action mixes fines
and clods without firming,
C.
Adjustable spring down pressure (60-80 lbs./27-36 kg).
D.
Large, 14 in. (356 mm) baskets easily roll over
obstructions.
E.
Open basket centers for less basket load and
plugging.
which speeds drying.
The ACS Flat works well in hard
or high-clay soil. Because
the ACS Flat does not firm,
it can run in wet or dry
conditions, and it can be run
in wetter conditions than the
4
A bridge frame design is used for the ultimate in strength and
There’s ample space between wheels and shanks to enhance residue flow and
performance. 5-bar frame utilizes 3 x 4 in. (76 x 102 mm)
reduce wedging of residue between tires and shanks. Tandem axles
side-to-side and 2 x 2 in. (51 x 51 mm) front-to-rear tubing.
are designed with less weight on the front tire to help ride over soft spots and
Lap welds are used to increase strength and extend frame life.
bumps.
F.
Basket arms can be easily adjusted up by turning one
crumbler or ACS Round.
bolt per arm if conditions are too wet.
9
ADVANCED ENGINEERING FOR CONVENIENCE AND PRODUCTIVITY
ADVANCED CONDITIONING SYSTEMS (ACS)
Superior systems for smooth seed beds.
The ACS Round was specifically developed for
3 bushels per acre over a typical 3-bar coil tine
For additional operator safety and convenience, the
One seed bed conditioning system is not the solution
fields that need moderate clod sizing and seed bed
harrow.* Tests also reveal that the ACS Flat in clay
tiger-mate II has a swinging hose stand. This stand
for all soil types and farming operations. That is why
firming, while the ACS Flat was designed for
loam soils (with timely precipitation shortly after
allows the operator to safely move the hydraulic hoses
Case IH developed two Advanced Conditioning
aggressive clod sizing without the firming action of
planting) added approximately 5 bushels per acre over
out of the way of the hitch while hooking up the
Systems (ACS). Simply match the desired field finish
the ACS Round.
a typical 3-bar coil tine harrow.*
implement, and prevents hose damage during tight turns
with your soil environment and farming practice, and
Increase Yields! Tests reveal that the
then select the Advanced Conditioning System
ACS Round in clay loam soils (with inadequate
that is best for your fields.
precipitation shortly after planting) added approximately
*2000 research data from CNH PMIG
by taking up the hose slack. The operator’s manual is
also conveniently stored here as well.
Look over the rest of the information shown here,
STANDARD
SWEEP
MAXXI-POINT
SWEEP
For aggressive tumbling and mixing.
Low crown for less groove. Long nose
Clipped wing for long wear. 7 in. (178
for extra long wear. Curved edge for
mm) and 9 in. (229 mm) high crown
better cutting action. 7 in. (178 mm)
and 7 in. (178 mm) low crown
and 9 in. (229 mm) available.
available.
and you will soon see the Case IH tiger-mate II has
The ACS leads the industry in consistent down
the proven performance, determined durability and
A Self-leveling Hitch keeps the unit level from front to back and assures uniform
little extras which make it the premier field cultivator
tillage depth. The Turnbuckle is positioned for easy access from the left side. No
in the industry!
wrenches needed to adjust levelness!
pressure throughout an entire 26 in. (66 cm)
trip clearance (see red line in chart below). It
creates a uniform soil finish, in the most diverse
conditions, without compacting soil and reduces
stress on the ACS and cultivator when baskets roll
up and over obstructions.
ACS
Optimum Zone
A Positive Mechanical Depth Control System adjusts each set of tandems
individually for optimum depth control. Depth is adjusted from the front
bar – no wrenches required. During operation, the cylinders are fully retracted
8
to eliminate any depth changes due to cylinder leakage.
5
LEVELING SYSTEMS FOR VARYING SOIL TYPES AND CONDITIONS
MEETING THE CHALLENGE OF UNIFORM SOIL & RESIDUE FLOW
Valuable versatility. Case IH tiger-mate II
ACS Round and ACS Flat, and the
Advanced Leveling Systems (ALS) evenly distribute soil
proven crumbler available. To
and residue behind the field cultivator for a smooth,
determine how to best match the
level field finish that is easier to plant. Three different
tiger-mate II with an ALS harrow or
ALS options are available... coil tine, spike tooth and
ACS for your cropping practice, consult
tiger-tine harrows. In addition, the tiger-mate II has
the decision guide at right or contact
two different Advanced Conditioning Systems (ACS),
your Case IH dealer.
tiger-tine HARROWS PROVIDE SPLIT-THE-MIDDLE TIMES 2!
The tiger-tine harrow uses a unique combination
of split-the-middle indexed tine placement,
rank are centered between the sweeps to knock down
the ridge left by the shanks. The second, third and
parallel linkage, and three-tine angle
fourth ranks of the tiger-tine split-the-middle of prior
adjustments to get its superior field
ranks to again level any remaining ridge. The result
performance. The indexed tines on all
is an effective 2 in. (51 mm) tine spacing that has
four ranks create smooth, level
unparalleled performance in the field. The parallel
fields by evenly distributing soil
linkage and non-linked tine bars allow independent
and residue through split-the-
movement and eliminate levelness settings while
middle tine placement.
handling residue without bunching or allowing
Double tines on the first
clumped residue to drag.
The tiger-tine harrow has many unique features.
The harrow support arm mounting allows the arm
to pivot up. Each harrow section is carried by two
sets of parallel arms. Non-linked tine bars allow
independent movement.
The ALS – CT Coil Tine Harrow has a 3-bar design and 15
The ALS – ST Spike Tooth Harrow has a 5-bar design
The unique flexible design of the tiger-tine harrow
Two pins per arm adjust the tine angle and spring pressure
in. (38 cm) rank for excellent residue flow and leveling. This
and 10 in. (254 mm) rank for excellent leveling and clod
prevents skips and gouges when going over terraces and
(no tools are needed). 5°– for aggressive leveling in heavy soils
harrow utilizes 16 in. (41 cm) long, 7/16 in. (11.1 mm)
breakage. This harrow utilizes 11 in. (279 mm) long,
through draws, while keeping it level from front to back
with minimal residue. 20°– the standard setting for most soils and
diameter double-coil tines with 2-1/2 in. (63.5 mm) effective
3/4 in. (19 mm) square width teeth with 1-1/2 in. (38 mm)
and side-to-side. Depth and level adjustments are
residue. 35°– for extremely heavy residue.
spacing. Tines rotate to prevent damage when backing up.
effective spacing.
eliminated for maximum productivity in the field.
A crank-type height adjustment is used.
6
7
LEVELING SYSTEMS FOR VARYING SOIL TYPES AND CONDITIONS
MEETING THE CHALLENGE OF UNIFORM SOIL & RESIDUE FLOW
Valuable versatility. Case IH tiger-mate II
ACS Round and ACS Flat, and the
Advanced Leveling Systems (ALS) evenly distribute soil
proven crumbler available. To
and residue behind the field cultivator for a smooth,
determine how to best match the
level field finish that is easier to plant. Three different
tiger-mate II with an ALS harrow or
ALS options are available... coil tine, spike tooth and
ACS for your cropping practice, consult
tiger-tine harrows. In addition, the tiger-mate II has
the decision guide at right or contact
two different Advanced Conditioning Systems (ACS),
your Case IH dealer.
tiger-tine HARROWS PROVIDE SPLIT-THE-MIDDLE TIMES 2!
The tiger-tine harrow uses a unique combination
of split-the-middle indexed tine placement,
rank are centered between the sweeps to knock down
the ridge left by the shanks. The second, third and
parallel linkage, and three-tine angle
fourth ranks of the tiger-tine split-the-middle of prior
adjustments to get its superior field
ranks to again level any remaining ridge. The result
performance. The indexed tines on all
is an effective 2 in. (51 mm) tine spacing that has
four ranks create smooth, level
unparalleled performance in the field. The parallel
fields by evenly distributing soil
linkage and non-linked tine bars allow independent
and residue through split-the-
movement and eliminate levelness settings while
middle tine placement.
handling residue without bunching or allowing
Double tines on the first
clumped residue to drag.
The tiger-tine harrow has many unique features.
The harrow support arm mounting allows the arm
to pivot up. Each harrow section is carried by two
sets of parallel arms. Non-linked tine bars allow
independent movement.
The ALS – CT Coil Tine Harrow has a 3-bar design and 15
The ALS – ST Spike Tooth Harrow has a 5-bar design
The unique flexible design of the tiger-tine harrow
Two pins per arm adjust the tine angle and spring pressure
in. (38 cm) rank for excellent residue flow and leveling. This
and 10 in. (254 mm) rank for excellent leveling and clod
prevents skips and gouges when going over terraces and
(no tools are needed). 5°– for aggressive leveling in heavy soils
harrow utilizes 16 in. (41 cm) long, 7/16 in. (11.1 mm)
breakage. This harrow utilizes 11 in. (279 mm) long,
through draws, while keeping it level from front to back
with minimal residue. 20°– the standard setting for most soils and
diameter double-coil tines with 2-1/2 in. (63.5 mm) effective
3/4 in. (19 mm) square width teeth with 1-1/2 in. (38 mm)
and side-to-side. Depth and level adjustments are
residue. 35°– for extremely heavy residue.
spacing. Tines rotate to prevent damage when backing up.
effective spacing.
eliminated for maximum productivity in the field.
A crank-type height adjustment is used.
6
7
ADVANCED ENGINEERING FOR CONVENIENCE AND PRODUCTIVITY
ADVANCED CONDITIONING SYSTEMS (ACS)
Superior systems for smooth seed beds.
The ACS Round was specifically developed for
3 bushels per acre over a typical 3-bar coil tine
For additional operator safety and convenience, the
One seed bed conditioning system is not the solution
fields that need moderate clod sizing and seed bed
harrow.* Tests also reveal that the ACS Flat in clay
tiger-mate II has a swinging hose stand. This stand
for all soil types and farming operations. That is why
firming, while the ACS Flat was designed for
loam soils (with timely precipitation shortly after
allows the operator to safely move the hydraulic hoses
Case IH developed two Advanced Conditioning
aggressive clod sizing without the firming action of
planting) added approximately 5 bushels per acre over
out of the way of the hitch while hooking up the
Systems (ACS). Simply match the desired field finish
the ACS Round.
a typical 3-bar coil tine harrow.*
implement, and prevents hose damage during tight turns
with your soil environment and farming practice, and
Increase Yields! Tests reveal that the
then select the Advanced Conditioning System
ACS Round in clay loam soils (with inadequate
that is best for your fields.
precipitation shortly after planting) added approximately
*2000 research data from CNH PMIG
by taking up the hose slack. The operator’s manual is
also conveniently stored here as well.
Look over the rest of the information shown here,
STANDARD
SWEEP
MAXXI-POINT
SWEEP
For aggressive tumbling and mixing.
Low crown for less groove. Long nose
Clipped wing for long wear. 7 in. (178
for extra long wear. Curved edge for
mm) and 9 in. (229 mm) high crown
better cutting action. 7 in. (178 mm)
and 7 in. (178 mm) low crown
and 9 in. (229 mm) available.
available.
and you will soon see the Case IH tiger-mate II has
The ACS leads the industry in consistent down
the proven performance, determined durability and
A Self-leveling Hitch keeps the unit level from front to back and assures uniform
little extras which make it the premier field cultivator
tillage depth. The Turnbuckle is positioned for easy access from the left side. No
in the industry!
wrenches needed to adjust levelness!
pressure throughout an entire 26 in. (66 cm)
trip clearance (see red line in chart below). It
creates a uniform soil finish, in the most diverse
conditions, without compacting soil and reduces
stress on the ACS and cultivator when baskets roll
up and over obstructions.
ACS
Optimum Zone
A Positive Mechanical Depth Control System adjusts each set of tandems
individually for optimum depth control. Depth is adjusted from the front
bar – no wrenches required. During operation, the cylinders are fully retracted
8
to eliminate any depth changes due to cylinder leakage.
5
CUSTOMIZE YOUR FIELD FINISH TO ENHANCE THE SEED BED
DESIGNED FOR HIGH-SPEED, HIGHLY PRODUCTIVE FARMING
tiger-mate® II
The ACS Round is used for
moderate clod sizing and
seed bed firming. Round rods
Case IH Advanced Conditioning Systems
create smooth, level seed bed for easier planting and
crush clods, firm soil fines and
consistent holding power in extreme conditions. This
load evenly throughout the entire machine to the double
yield-till system. The Case IH tiger-mate II seed bed
allows for greater operating speeds to increase your
bushings that are used at the shank pivot and spring
increase your profit potential two ways: by improving
early, uniform emergence. You will also enhance uniform
preparation machine was designed to increase the yield
productivity and get your crops planted faster. But there’s
slide area, we have significantly reduced major stress
seed bed conditions, and thereby yields, and by
chemical incorporation, thereby reducing “hot spots.”
dimensions as the industry-
potential of every plant, while enhancing and simplifying
more... compression springs are used so they cannot be
areas for longer life and increased productivity.
increasing operator efficiency. Like the Case IH
Additionally, an ACS Round or Flat kills weeds by
leading Case IH crumbler®,
its operation, increasing its productivity potential.
stretched out of shape. The standard 14 in. (356 mm)
tiger -tine harrow, these systems have no depth or
knocking soil off old root crowns and roots of existing
level adjustments. Just drop the cultivator and go!
weeds, further reducing your chemical costs and
Helping Plants Thrive through the
The little extras that add up. To further
leave protective larger clods
on top. This unit has the same
only with hollow rods.
trip height allows the sweeps to clear virtually every
increase productivity, we also included a few extras
significant key to a level seed bed is keeping the
obstruction, and the “clamp style” mounts with
that will get the job done faster and safer. All leveling
cultivator in the ground. Although it seems simple,
positive stops keep the sweeps in position for a level,
adjustments are made at the front of the machine, with
excellent seed bed finishing
some of the slight differences in the tiger-mate II over
uniform bed.
no wrenches needed. The easy-to-use transport locks flip
in mellow or sandy soils
Accurate depth. Precision performance. A
competitive, look-a-like models create the precision
Robust reliability. You demand reliability, and
No matter which ACS model you choose, you will
increasing your ROI!
and works best in dry to
up for secure transport. And, an optional rear hitch is
performance to make it happen. For example, every
the tiger-mate II is proven in this category as well.
available for quick and easy attachment of the optional
shank has 150 lbs. (68 kg) of trip force to provide
From its industry-first hitch design that spreads draft
crumbler seed bed finisher.
The ACS Round provides
BUILT FOR PERFORMANCE
moderately wet conditions.
It can be run in wetter
conditions than the crumbler .
A.
2-bar coil tine harrow is indexed to the rear shanks of
the cultivator to effectively level the soil and distribute
The ACS Flat is the choice for
When equipped with the ACS Flat, the tiger-mate II effectively
residue before the baskets. The parallel linkage
aggressive clod sizing without
cultivates, manages residue and sizes clods for a seed bed
eliminates depth adjustments.
firming. Knife-like blades cut
clods and throw soil and
residue. All down pressure
B.
No tools are needed to adjust tine angle for a
is concentrated on cutting
customized field finish.
action. The aggressive soil
throwing action mixes fines
and clods without firming,
C.
Adjustable spring down pressure (60-80 lbs./27-36 kg).
D.
Large, 14 in. (356 mm) baskets easily roll over
obstructions.
E.
Open basket centers for less basket load and
plugging.
which speeds drying.
The ACS Flat works well in hard
or high-clay soil. Because
the ACS Flat does not firm,
it can run in wet or dry
conditions, and it can be run
in wetter conditions than the
4
A bridge frame design is used for the ultimate in strength and
There’s ample space between wheels and shanks to enhance residue flow and
performance. 5-bar frame utilizes 3 x 4 in. (76 x 102 mm)
reduce wedging of residue between tires and shanks. Tandem axles
side-to-side and 2 x 2 in. (51 x 51 mm) front-to-rear tubing.
are designed with less weight on the front tire to help ride over soft spots and
Lap welds are used to increase strength and extend frame life.
bumps.
F.
Basket arms can be easily adjusted up by turning one
crumbler or ACS Round.
bolt per arm if conditions are too wet.
9
THE FINISHING TOUCH TO THE PERFECT SEED BED
PREPARES A SEED BED THAT CREATES FASTER, UNIFORM EMERGENCE
crumbler ®
IMPROVED SOIL TILTH FOR BETTER SEED BED CONDITIONS
SEED BED FINISHER
Maximize your crop’s yield potential, lower your input
tiger-mate II to form an incredibly effective tillage team.
The crumbler breaks up surface clods and creates a
costs and put more money in your pocket!
The crumbler also provides weed and erosion
control by knocking soil off old root crowns and roots
coarse soil. This results in a firm seed bed for precise
of existing weeds, leaving roots exposed. The final
seed-to-soil contact with a valuable moisture barrier
result is a soil surface that resists crusting and lessens
of fine soil.
wind and water erosion. The bottom line? Increased
Combine 4 Passes into 1! The Case IH
yields! There are 17 sizes available from 12.5 ft.
into one... cultivate, incorporate, level and firm.
This final tune-up creates an
excellent seed bed of firm, fine
soil covered by loose, coarse
soil. The crumbler firms soil to
reduce air pockets and moisture
evaporation and enhances
COARSE SOIL
ON TOP
(3.8 m) to 50 ft. (15.2 m) to match with an appropriatesized tiger-mate II.
Double-Fold
Transport Position
▲
seed bed of firm, fine soil that is covered by loose,
tiger-mate II and crumbler combine four passes
Creating the perfect seed bed is the key to
Proper seed bed preparation helps warm the soil,
Telescoping Tongue
Matches to implement widths for
tight turning in the field and shortens
for transport and storage.
The SMS design also assures
improving your crop’s chances at maximizing its yield
allowing it to dry-down quicker, for earlier planting and
even tracking and uniform sweep
potential. With the Case IH tiger-mate II and crumbler
a longer growing season. See the positive effects of an
wear by evenly loading both
working for you in the spring, you will create greater
early start in the chart below.
sides of each
surface soil tilth with proper pore and soil aggregate
Through its Split-the-Middle Sweep (SMS)
pattern and 6 in. (152 mm) shank spacing, the
size and distribution within the seed zone.
▲
The Case IH crumbler combines with the
PLANTING TIME
EMERGENCE
GRAIN YIELD (% OF MAX)
NO DELAY
ALL EARLY (MAY 1)
100
MEDIUM DELAY
ALL MEDIUM
(1-1/2 WEEKS AFTER EARLY)
3/4 EARLY, 1/4 MEDIUM
95
ALL LATE
(3 WEEKS AFTER EARLY)
3/4 EARLY, 1/4 LATE
88
90
3/4 EARLY, 1/4 MISSING
90
LATE DELAY
SOIL FINES IN
THE SEED ZONE
STAND LOSS
94
1. Corn planted later with
uniform emergence
compares to corn planted
earlier with uneven
emergence
2. Late emerging plants
contribute no more yield
than missing plants
Source: NCH-36 Carter, Natziger, Hicks
sweep, which
prepares a
tiger-mate II thoroughly mixes
level seed bed
organic matter with the soil and
for uniform
incorporates nutrients evenly,
emergence.
reducing “hot spots” that can
The first three
burn the roots of young seedlings.
rows of shanks
This tillage also mixes herbicides,
take a full cut through the soil, and the fourth and fifth
carried over from past crops,
rows cut out the middles. Soil, residue and chemicals are
deeper into the soil, minimizing
mixed and spread uniformly across the width of the unit
their effect on the newly
and throughout the tillage depth. See the positive effect
planted seeds.
of uniform emergence in the chart to the left.
uniform chemical incorporation
and reduces “hot spots.”
CROP RESIDUE MANAGEMENT FOR IMPROVED PRODUCTIVITY
Built to withstand higher residue and large-acreage
Depending on your residue management
operations, the tiger-mate II has exceptional residue
requirements, the Case IH tiger-mate II can be outfitted
flow and uniform distribution. The shanks are spaced on
with one of several different seed bed finishing systems.
a true 5-rank frame with no shanks closer than 24 in.
The tiger-tine™ harrow, for example, has exceptional
(61 cm) from center-to-center. This provides ample room,
leveling characteristics, while handling heavy residue
even around the walking-tandem wheels, to minimize
without bunching or allowing clumped residue to drag.
plugging and enhance the productivity of the machine.
See pages 6-9 for the different harrow options for the
Its large, 5.90 x 15, 4-ply stabilizer wheels are used to
Case IH tiger-mate II.
keep the machine at peak performance over the
10
roughest terrain.
3
SPECIFICATIONS
crumbler
tiger-mate II
GETTING OFF TO A GOOD START TODAY PUTS MORE MONEY IN YOUR POCKET TOMORROW
With every planting season you only have one
level seed bed with better seed-to-soil contact for
(ALS) or Advanced Conditioning System (ACS)
chance to build the perfect seed bed for your crops,
faster germination and uniform crop emergence
harrows (with or without the crumbler) to properly
and the seed bed preparation team of the Case IH
throughout the field.
distribute residue, size clods and firm the seed zone to
tiger-mate ® II and crumbler ® is the best way to make
the most of every
opportunity and improve
your Return On
Investment (ROI). As
illustrated at right, the
Case IH tiger-mate II
field cultivator and
crumbler create a firm,
Soybean
Emergence
Worked
Loose
Soil
Firm
Moist
Soil
How do I create the best seed bed for my
prepare the most effective seed bed for your crops. It
operation? Studying the seed bed
is also important to consider your soil type and
conditions – residue levels and
weather patterns when making your decision. Your
surface soil tilth – to determine
Case IH yield-till system dealer can help equip your
the right match of equipment for
tiger-mate II with the right seed bed finishing system
your seed bed preparation
to maximize your yields and ROI.
needs. The tiger-mate II can
be equipped with a number of
tiger-mate II Field Cultivator: The high performance choice for
Advanced Leveling System
high residue applications. Many seed bed conditioning options
are available to finish the seed bed for varying soils and field
conditions. (Shown with optional crumbler seed bed finisher.)
TABLE OF CONTENTS
tiger-mate II & crumbler agronomics ....................2-3
tiger-mate II features .............................................4-5
Advanced Leveling Systems (ALS) ...........................6-7
Advanced Conditioning Systems (ACS) ...................8-9
crumbler .................................................................10
Specifications ............................................................11
COVER PHOTO: The tiger-mate II and crumbler
make an excellent tillage team for seed bed preparation.
2
APPROX. TRANSPORT DIMENSIONS
FRAME TYPE WORKING WIDTH
MAINFRAME WIDTH WIDTH (MAX)*
Single-Fold: 18.5 to 28.5 ft. (5.6 to 8.7 m)
10.5 ft. (3.2 m)
13.9 ft. (4.2 m)
30.5 ft. (9.3 m)
10.5 ft. (3.2 m)
14.4 ft. (4.4 m)
30.5 to 32.5 ft. (9.3 to 9.9 m)
12.5 ft. (3.8 m)
15.9 ft. (4.8 m)
34.5 to 38.5 ft. (10.5 to 11.7 m) 14.5 ft. (4.4 m)
17.9 ft. (5.5 m)
HEIGHT (MAX)**
12.5 ft. (3.8 m)
14.5 ft. (4.4 m)
13.3 ft. (4.0 m)
15.1 ft. (4.6 m)
Double-Fold: 38.5 to 46.5 ft. (11.7 to 14.2 m)
48.5 to 50.5 ft. (14.8 to 15.4 m)
54.5 to 60.5 ft. (16.6 to 18.4 m)
13.5 ft. (4.1 m)
13.6 ft. (4.2 m)
15.6 ft. (4.7 m)
12.5 ft. (3.8 m)
14.5 ft. (4.4 m)
14.5 ft. (4.4 m)
16.9 ft. (5.2 m)
18.9 ft. (5.8 m)
18.9 ft. (5.8 m)
MAINFRAME
Industry-first bridge frame construction
Five ranks of 3 x 4 in. (76 x 102 mm) side-to-side and double 2 x 2 in. (51 x 51 mm) fore/aft structural members
Minimum rank spacing is 30 in. (76.2 cm)
SHANKS
Split-The-Middle sweep pattern
5/8 in. (15.9 mm) thick by 1-3/4 in. (44.5 mm) shanks
Minimum shank spacing is 6 in. (152 mm) with 24 in. (60 cm) center-to-center
Compression-spring design with 150 lbs. (68 kg) trip force and 14 in. (356 mm) trip height
MAINFRAME
Double-bar 4 x 4 in. (102 x 102 mm) members on mainframe and inner wings
Single-bar 4 x 4 in. (102 x 102 mm) on outer wings
AVAILABLE OPTIONS
Rear hitch to pull crumbler
Standard or Long Nose sweeps
Three Advanced Leveling System harrows available (3-bar coil tine, 4-bar tiger-tine and 5-bar spike tooth)
Two Advanced Conditioning Systems available (ACS Round and ACS Flat)
REELS
14 in. (356 mm) diameter with 10 solid 7/8 in. (22.2 mm) bars
Spring-cushioned with approximately 110 lbs. (49.9 kg) of ground pressure
HYDRAULICS
One lift circuit operates both wing-fold and transport cylinders and fittings; ISO tips
TRANSPORT TIRES
9.5 L x 15 8-Ply tubeless rib implement tires
OPERATING GUIDELINES
Vary with soil conditions
Requires approximately 4 to 7 pto horsepower per foot or 2 to 3.5 pto horsepower per shank
Recommended operating speed is 5.5 mph (8.8 km/m) to 8 mph (12.8 km/m)
** To outermost shank
** Without harrows (Transport height and width may vary with harrows and are approximates.)
OPERATING GUIDELINES
Vary with soil conditions
Requires approximately 1 pto horsepower per foot
Recommended operating speed is 5 mph (8.05 km/m) to 8 mph (12.87 km/m)
Advanced Leveling Systems (ALS) Harrows
4-bar tiger-tine
4
16 in. (41 cm)
7/16 in. (11.1 mm)
8 in. (203 mm)
2 in. (51 mm)
3-position adjustment
HEIGHT (MAX)**
4.5 ft. (1.4 m)
4.5 ft. (1.4 m)
7 ft. (2.1 m)
8 ft. (2.4 m)
8 ft. (2.4 m)
11 ft. (3.4 m)
10 ft. (3.0 m)
10 ft. (3.0 m)
9.5 ft. (2.9 m)
9.5 ft. (2.9 m)
12 ft. (3.7 m)
9.5 ft. (2.9 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
12 ft. (3.7 m)
14.5 ft. (4.4 m)
HITCH
Telescoping tongue shortens for transport and storage
Tongue lengths vary depending on working width and frame configuration
DEPTH CONTROL SYSTEM
Positive mechanical crank adjustment turnbuckle for fore/aft levelness with depth indicator
Convenient, wrench-free adjustment from the front bar
3-bar Coil Tine
3
16 in. (41 cm)
7/16 in. (11.1 mm)
7.5 in. (191 mm)
2.5 in. (64 mm)
5-position adjustment
Single-Fold:
Double-Fold:
HITCH
Self-Leveling hitch with turnbuckle adjustment
Swinging hose stand with operator’s manual storage
Combination single and double clevis
RANKS:
SPIKE/TINE LENGTH:
SPIKE/TINE DIAMETER:
SPIKE/TINE SPACING:
EFFECTIVE SPIKE/TINE SPACING:
TINE ANGLE ADJUSTMENT:
FRAME TYPE
Rigid:
APPROX. TRANSPORT DIMENSIONS
WORKING WIDTH
MAINFRAME WIDTH
WIDTH (MAX)*
12.5 ft. (3.8 m)
12.5 ft. (3.8 m)
5.5 ft. (4.7 m)
15 ft. (4.6 m)
15 ft. (4.6 m)
15.5 ft. (4.7 m)
18 ft. (5.5 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
20 ft. (6.1 m)
22.5 ft. (6.9 m)
12.5 ft. (3.8 m)
15.5 ft. (4.7 m)
25 ft. (7.6 m)
10 ft. (3.0 m)
13 ft. (4.0 m)
27.5 ft. (8.4 m)
12.5 ft. (3.8 m)
15.5 ft. (4.7 m)
30 ft. (9.1 m)
15 ft. (4.6 m)
18 ft. (5.5 m)
30 ft. (9.1 m)
10 ft. (3.0 m)
16 ft. (4.9 m)
32.5 ft. (9.9 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
35 ft. (1.7 m) Narrow
15 ft. (4.6 m)
16 ft. (4.9 m)
35 ft. (1.7 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
37.5 ft. (11.4 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
40 ft. (12.2 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
42.5 ft. (13.0 m)
12.5 ft. (3.8 m)
18.5 ft. (5.6 m)
45 ft. (13.7 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
50 ft. (15.2 m)
15 ft. (4.6 m)
21 ft. (6.4 m)
5-bar Spike Tooth
5
11 in. (279 mm)
3/4 in. (19.1 mm)
7.5 in. (191 mm)
1.5 in. (38 mm)
Advanced Conditioning Systems (ACS)
RANKS:
RANK SPACING:
TINE LENGTH:
TINE DIAMETER:
EFFECTIVE TINE SPACING:
TINE ANGLE ADJUSTMENT:
2 ranks of tines
15 in. (381 mm)
16 in. (41 cm)
7/16 in. (11.1 mm)
4 in. (102 mm)
5˚, 20˚, or 35˚
LENGTH (FRONT TO BACK): 77 in. (196 cm)
BASKET DIAMETER:
14 in. (356 mm)
FLAT BAR SIZE:
1/4 x 1.25 in. (6.4 x 31.8 mm)
ROUND TUBE SIZE:
7/8 in. (22.2 mm) diameter
hollow tubes
BASKET DOWN PRESSURE: 60-80 lbs. (27.2-36.3 kg)
11
yield-till system
®
S E E D B E D P R E PA R AT I O N
Case IH dealers are the standard for expert sales, service and support of the most technologically advanced equipment
in the world. They ’re committed to understanding your business and providing unique solutions to maximize your productivity.
From tractors to AFS precision farming technology, Case IH dealers offer a complete agricultural system. Coupled with
timely parts and service, and flexible financial solutions through Case Credit, Case IH dealers provide a total package to
ensure you’re always performing at your best.
But most importantly, Case IH dealers offer planning for the long-term growth of your business. By staying at the forefront
of agronomic issues and the cutting edge of technology, they help prepare you for tomorrow.
Whatever it takes, Case IH dealers are dedicated to helping your operation achieve
success season after season. Visit your Case IH dealer today to see the advantages of
worldwide leadership.
SAFETY NEVER HURTS!™ Always read the Operator’s Manual before
operating any equipment. Inspect equipment before using it, and be sure
it is operating properly. Follow the product safety signs, and use any safety
features provided.
CNH America LLC reserves the right to make improvements in design and
changes in specifications at any time without notice and without incurring
any obligation to install them on units previously sold. Specifications,
descriptions and illustrative material herein are as accurate as known at
time of publication, but are subject to change without notice.
Case IH and Case Credit are registered trademarks of CNH America LLC
Any trademarks referred to herein, in association with goods and/or services of companies
other than CNH America LLC, are the property of those respective companies.
This literature has been published for worldwide circulation. Availability of
some models and equipment builds varies according to the country in
which the equipment is used.
AE-377091
Replaces: None
©2001-2004 CNH America LLC
All Rights Reserved
Printed in U.S.A.
www.caseih.com