TABLE OF CONTENTS - PA Supply Company

Transcription

Pennsylvania Supply Co
Allentown 610.434.5295
Easton 610.250.8996
Page 1
1/07
TABLE OF CONTENTS
Mission Statement and Berger Locations:
2
Snow Retention Systems:
3-13
®
Real Tool Snow Guards
3
Berger Clear Snow Guards and Caulks
4
F-RailTM, E-RailTM & S-RailTM Snow Retention
5
Snow Meister Snow Guards
6
Berger Residential Snow Guards
6-8
Mullane Snow Guards
8-12
Technical Information
13
Synthetic Roofing Underlayment:
14
TM
EuraCraft Gutter System :
15-20
Embossed Gutter:
21
Berger Gutter:
22-24
K-Style Gutter
22
K-Style Apron Gutter
23
Half Round Gutter
24
Downspouts:
25-26
Round Downspouts
25
Square Downspouts
26
Elbows:
27-28
Round Elbows
27
Square Elbows
28
Accessories:
29-44, 49-50
Offsets
29
Hangers – K-Style
30-33
Hangers – Half Round
34-36
Shanks – K-Style & Half Round
37-38
End Caps – K-Style & Half Round
39
Miters – K-Style
40
Miters – Half Round
41
End Pieces – K-Style & Half Round
42
Slip Joints – K-Style & Half Round
42
Outlets – K-Style & Half Round
43-44
Conductor Heads
49
Eave Boxes
50
Funnels
50
Featured Product:
45-48
Quality Roof Drainage Products, Edgings &
Coil in a Variety of Popular Colors
Accessories:
Cut-Offs & Diverters
Downspout Tubes
Pipe Fasteners – Downspout Hooks, Rack &
Key, Drives, Universal and Ornamental
Conductor Bands, Pipe Brackets
& Cleats
Miscellaneous – Wire Strainer, Pop Rivets,
Gutter Wedge, Trim Nails, Gutter Mastic,
Touch-Up Paint & Pipe Flashing
Gutter Guards, Splash Blocks &
Flex-A-Spout
Step Flashing:
Roof Edging & Trim:
“A” Styles
“B” Styles
“C” Styles
“D” Styles
“E” Styles
“F” Styles
“H” Styles
Vented Drip Edge
Overhanging Drip Edge (ODE and ODLR)
Miscellaneous – Drip Caps, Ridge Roll,
Deck Ledger, Preformed Valley Flashing,
Brick Moulding, Corner Flex® Flashing,
& Kick-Out Diverters
Aluminum Soffit & Accessories:
Solid & Vented Aluminum & Copper Soffit
Accessories – AccuVentTM, Fascia,
F Channel, J Channels, Starter Strip,
Soffit Moulding, Soffit Trim &
Pro-Master Ridge VentTM
DrySnap™ Under Deck Rain Carrying System:
Coil Products:
Aluminum & PVC Trim Coil
Aluminum & Copper Gutter Coil
Other – Terne Metal, Aluminum / Copper /
Galvanized Steel Flashing, Copper
Sheets, Metal Bender Tool & Blades
Technical Reference Appendix:
51-61
51
51
52-55
56-57
58-60
61
62-72
62
62
62-64
65
65-66
66-68
69
69
70
70-72
73-75
73
74-75
76
77-80
77
77-78
78-80
A1-A16
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
MISSION STATEMENT
AND BERGER LOCATIONS
Mission Statement
To manufacture the highest quality products and maintain maximum customer satisfaction through superior service and competitive pricing. Promote a team atmosphere where
employees will experience challenging and rewarding career opportunities.
Berger Locations
CORPORATE HEADQUARTERS:
MIDWEST:
805 Pennsylvania Boulevard
Windham Industrial Center V
Feasterville, PA 19053
1160 West Remington Boulevard
Ph: 800-523-8852
Romeoville, IL 60446
Ph: 215-355-1200
Ph: 630-679-0508
Fax: 215-355-7738
Fax: 630-679-0903
NEW ENGLAND:
SOUTHWEST:
101 B H. P. Almgren
1025 Avenue S, Suite 150
Agawam, MA 01001
Grand Prairie, TX 75050
Ph: 413-786-1713
Ph: 972-641-1881
Fax: 413-786-8964
Fax: 972-641-7333
SOUTHEAST:
WEST:
4455 River Green Parkway
3701-A Pell Circle
Duluth, GA 30096
Sacramento, CA 95838
Ph: 770-449-6818
Ph: 916-924-1881
Fax: 770-447-4811
Fax: 916-924-0562
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 2
1/07
SNOW RETENTION SYSTEMS
RT® Snow Guard Series - 100 pcs. per ctn.
Berger RT Snow Guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set
screws to clamp them in place. They require no glues or sealants, and will not restrict thermal movement or contribute to unsightly oilcanning. RT Snow Guards are available in cast aluminum and cast bronze, and in two sizes to accommodate differing seam widths. They
are particularly suited to double-lock and mechanically seamed metal roofing, and being traditional in design, they are ideal for
restoration and preservation work.
RT-200 Designed to accommodate seams of up to 3/16" (0.188" thick) and no higher than 1 inch. Suited for use with light gauge sheet
metals such as 40lb. terne, 26 gauge galvanized, 16 ounce copper, lead coated copper and TCS.
RT-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and no higher than 1 inch. Suited to heavier gauge metals
such as 20 ounce copper, 24 gauge prefinished metal and products of similar thickness.
• Available in Mill Finished Aluminum (M), E-Coat (E), Custom Color Aluminum (C) and Bronze- for Copper Roofs (B).
• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.
ENTER COLOR/METAL CODE WHEN ORDERING
Seams up to 3/16” Thick & 1 Inch High
Code
U. S. Patents 5,282,340 and 351,989
Seams up to 9/32” Thick & 1 Inch High
Price
RT200__
Code
Price
RT300__
AP Snow Guard Series - 50 pcs. per ctn.
Berger AP Snow Guards are non-penetrating devices which have been engineered specifically for use with the more popular structural
and non-structural preformed and architectural metal roof systems. They are secured without glues or sealants, and utilize custom milled
stainless steel set screws to clamp them in place. They are produced in cast aluminum, and are available in three different seam widths
and heights. The attachment of the AP Snow Guard does not restrict thermal movement, and the deep throat permits it to be secured
directly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularly
effective in retaining snow with the higher seams and wider panel widths common in preformed architectural roofing.
AP-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and at least 1-1/4" high, including high double locked
mechanically closed seams and single locked preformed architectural panels.
AP-400 Designed to accommodate seams of up to 3/8" (0.400") in thickness and at least 1-1/2" high, including snap-lock interlocking
panels.
AP-516 Designed to accommodate seams of just over 1/2" (0.516") in thickness and at least 1-1/2" high.
• Available in Mill Finished Aluminum (M), E-Coat (E), and Custom Color Aluminum (C).
• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.
Seams up to 9/32” Thick & 1 1/4” High
Code
U. S. Patents 5,522,185 and 372,421
Price
AP300__
Code
Price
AP400__
Code
Price
AP516__
SM Snow Guard Series - 50 pcs. per ctn.
Berger SM Surface Mount Snow Guards are manufactured of cast aluminum and are designed to be adhered to the pan surface of
prefinished metal roofs using either a high strength construction adhesive or a combination of mechanical fasteners and an adhesive/
sealant. They are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam
mounted device can be fastened, including batten and lap seam panels, and other profiles having a flat surface of as little as 2 3/8" in
width and space for a 5" blade. The SM Snow Guard is uniquely suited for use on trapezoidal type panels when coupled with the
matching RT-300 Snow Guard. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.
• Available in Mill Finished Aluminum (MF), E-Coat (EA) and Custom Color Aluminum (CA).
• Custom Color (CA) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.
Surface Mount
Code
U. S. Patent 364,338
Price
SM__ __SG
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 3
1/07
Page 4
1/07
RTCLSM
Clear Snow Guard Series - 50 pcs. per ctn.
Berger Clear Snow Guards are manufactured in a crystal clear polycarbonate with U.V. stabilizers. There are two models of the Berger
Clear Snow Guards: RTCLSR - Structural Ribs and RTCLSM - Surface Mount. The unique vent rib system allows for adhesive out
gassing, which increases the shear and mechanical strength. The three to one base to blade ratio adds significantly to the shear and peel
adhesion of the device to the surface. Superior engineering, along with the structured ribs, prevent common blade breakage. Berger Clear
Snow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3-1/2"
wide. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.
Structural Rib
RTCLSR
U. S. Patents 6,266,929 and 418,403
Code
Surface Mount
Price
RTCLSR
Code
Price
RTCLSM
RTMINI Clear Snow Guards - 100 pcs. per ctn.
Berger RTMINI Clear Snow Guards are manufactured in a high clarity polycarbonate plastic with U.V. stabilizers which provides strength
and longevity. They have a low visibility and blend with roof materials. The RTMINI has a 1.5" wide base to fit parapet ribbed roof
channels. They are manufactured with a 4.5 square inch holding area, a 2:1 base to blade ratio and a gusseted blade snow pocket that
combine to effectively retain snow. They can be attached with adhesives, screws or VHB Tapes. The RTMINI features a blade "Snowflake"
slot that accepts a metal color chip or custom emblem. Adhesive failure does not constitute Berger product defect and is not the
responsibility of Berger.
Clear Polycarbonate
U. S. Patent Pending
Code
Price
RTMINI
SB-190 Surebond Everseal Warm Weather, High Strength Construction
Adhesive Caulk - 24, 10.3 oz. tubes per case
A versatile, hard setting, one part adhesive specially designed for a wide variety of industrial sealing. This unique formula possesses
up to 2000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. This adhesive/sealant requires 28 consecutive
days (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. Please follow directions for
best results. Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until initial set of
adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will adhere 8-10 CL Snow Guards and 14-16
RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes full
responsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizing
the directions of the adhesive manufacturer. In cold weather, Berger recommends mechanical attachment to the roof structural
member combined with the adhesive sealant for the best result. Adhesive failure does not constitute Berger products defect and is not
the responsibility of Berger.
Code
Price
SB-190
SB-1800 Surebond Everflex Cold Weather, High Strength Construction
Adhesive Caulk - 24, 10.3 oz. tubes per case
The Surebond Everflex SB-1800 is a cold weather sealant that can be used in temperatures as low as -20 degrees Fahrenheit and fully
cures in 24 hours to 500psi shear tensile strength. Under certain conditions, temporary measures may need to be employed to hold
the snow guard in place until initial set of adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will
adhere 8-10 CL Snow Guards and 14-16 RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for the
convenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adhering
snow guards with successful results utilizing the directions of the adhesive manufacturer. Adhesive failure does not constitute Berger
products defect and is not the responsibility of Berger.
Code
Price
SB-1800
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
F-RailTM Snow Retention System
• Accommodates up to 4 Rails of Protection.
• The Only Rail Style Snow Fence Available that Functions BELOW the Standing Seams on
Metal Roofs - Helping to Control the Possibility of Dangerous Ice Slides.
• Requires NO Penetration of the Roof.
• Receiver "Pockets" Make it an Easy-To-Install System.
• Easy to Retrofit Existing Roofs.
• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof.
Mill Finished Aluminum
Code
Price
FCSTSF
Custom Painted
Code
TM
U. S. Patent 6688047
E-Coat Black Primer
Price
FCSTFP
Code
Price
FCSTSFE
E-RailTM Snow Retention System
TM
• Dual Rail, Low Profile Snow Retention System.
• Stronger and Lighter System that offers between the Seams Protection on Metal Roofs Helping to Control the Possibility of Dangerous Ice Slides.
• Requires NO Penetration of the Roof and is Easy-To-Install.
• Receptor Slot for Custom Ornamental Attachment.
Code
Price
ECSTSF
Custom Painted
Code
E-Coat Black Primer
Price
ECSTSFP
Code
Price
ECSTSFE
S-RailTM Snow Retention System
• Single Rail, Low Profile Snow Retention System.
• Functions BELOW the Standing Seams on Metal Roofs - Helping to Control the
Possibility of Dangerous Ice Slides.
• Requires NO Penetration of the Roof and is Easy-To-Install.
• Economical Snow Rail that's Easy to Retrofit to Existing Roofs.
Code
Price
SCSTSF
Custom Painted
Code
E-Coat Black Primer
Price
SCSTSFP
Code
Price
SCSTSFE
F-RailTM, E-RailTM & S-RailTM Snow Retention System Components
•
•
•
•
•
TBSS20 Tubing is available in 16 Gauge Stainless Steel and is 20 feet x 1 inch square. Tubing is Sold by the foot.
TBCR24P Tubing is available in 16 Gauge CR Steel and is 24 feet x 1 inch square, Painted to Match the Roof.
Tube End Caps are available in Black Plastic.
Stainless Self Tap Screws #8 x 1/2".
Stainless Self Tap Screws are Sold by the Bag - 25 Screws per Bag.
TUBING
Code
TBSS20
END CAPS
Price
Code
TUBCAP
SCREWS
Price
Code
Price
STS812
TBCR24P
Please call Berger at (800) 523-8852 for specifics as these products are quoted as a “system” only.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 5
1/07
Page 6
1/07
SG-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn.
These non-penetrating devices are for traditional double lock standing seam roofs 1.0" deep x .250" wide. They fit both 1" and 1-1/2" high
seams. The symmetrical design rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom
Colors. Black E-Coat Epoxy Primer Cast Aluminum requires a final color coat by contractor. Painted Aluminum and Polished Bronze
require extended lead time and are not subject to cancellation or return. *Polished Bronze is a non-stock, special order.
Mill Finished Cast Aluminum
Code
U. S. Patent 6,499,259
Painted Cast Aluminum
Price
Code
SG-1MF
Price
SG-1C
Black E-Coat Primer Cast Alum.
Code
Polished Bronze
Price
Code
SG-1EBK
Price
SG-1PBZ*
SG-175 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per
These
ctn.non-penetrating Cast Aluminum devices are for snap lock seam roofs 1.75" deep x .475" wide. The symmetrical design
rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy Primer
Cast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject to
cancellation or return.
Code
U. S. Patent 6,499,259
Price
SG-175MF
Code
Price
SG-175C
Black E-Coat Primer Cast Aluminum
Code
Price
SG-175EBK
SL-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn.
These non-penetrating Cast Aluminum devices are for single lock T seam roofs 1.0" deep x .575" wide. The symmetrical design
rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy Primer
Cast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject to
cancellation or return.
Code
U. S. Patent 6,499,259
Price
SL-1MF
Code
Price
SL-1C
Black E-Coat Primer Cast Aluminum
Code
Price
SL-1EBK
Pro 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs 50 pcs. per ctn.
This heavy-duty snow guard is available in copper and stainless steel for corrugated, flat, slate and asphalt shingled roofs. The
superior design of the Pro 100 includes a 1-inch gusset that reinforces the shoe, which makes this snow guard 5 times stronger than
traditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied to
the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed
slots and pull to fully secure the bar. This style snow guard provides fast installation and is ideal for existing or new construction
applications with asphalt shingled roofs.
Copper
Code
SGCP100
Stainless Steel
Price
Code
Price
SGSP100
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Modified #100 Snow Guard for Asphalt Shingled Roofs - 50 pcs. per ctn.
This is a modified Berger #100 Snow Guard. The #100 shoe is attached to a shorter, solid bar/strap, and is designed for easy
installation on shingle roofs.
Copper
Code
Stainless Steel
Price
SGC100HP
Code
Price
SCS100HP
No. 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs 50 pcs. per ctn.
This guard has eliminated the necessity of removing slate, avoiding the possibility of breakage. Simply insert the slotted bar under the
slate or shingle, engage a nail with one of the conveniently placed slots and pull down to fully secure bar. This style snow guard
provides fast installation and is ideal for existing or new construction applications with asphalt shingled roofs.
Copper
Code
Stainless Steel
Price
SGC100
Code
Galvanized Steel
Price
SGS100
Code
Price
SGG100
No. 100 Snow Guards for Flat Metal Roof Surfaces - 50 pcs. per ctn.
Affordable protection for your gutter, foundation or shrubbery. Ideal for mounting to corrugated or flat roof panels. Stainless steel offers
no corrosion problems or stains and is suitable for paint to match your roof. The copper guard can be soldered or fastened to copper
roof panels. These guards provide 8.75 square inches of stopping area. Holes for #8 screws or rivets. 1" x 2" flat mounting area. Use
neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190).
Copper
Code
Stainless Steel
Price
SG-CPS
Code
Price
SG-SSS
No. 1 Snow Guards for Standing Seam - 100 pcs. per ctn.
The roofer’s choice since 1883 for use on standing seam metal roofs. They are pinched to clamp on the top of the seam providing a
rigid permanent job.
Bronze
Code
Galvanized Malleable Iron
Price
SGBR-1
Code
Price
SGML-1
No. 20 Snow Guards for Metal Corrugated Roof Surfaces - 100 pcs. per ctn.
Designed to fit 1 1/4" or 2 1/2" rounded corrugation. Use neoprene washer screws to fasten. All roof penetrations should be sealed with
adhesive sealant (SB-190). It fits on top of the corrugation.
Bronze
Code
SGBR20
Price
Code
Price
SGML20
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 7
1/07
Page 8
1/07
SNOW RETENTION SYSTEM
No. 2 Snow Guard Assembly for Slate Roofs - 50 pcs. per ctn.
A durable, plated iron casting and bar assembly designed for slate roofs. The riveted steel bar is 1/8" x 1" x 12" long and goes 8" under
the slate and between the slate course. It is normally installed with the slate roof application. Also suited for wood shake, tile and
mineral surfaced shingles. Use neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190).
Bronze
Code
Price
SGBR-2
Code
Price
SGML-2
No. 95 Snow Guard Assembly for Slate Roofs (Heavy Duty Ornamental)
A larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate. This assembly is
available in three material selections with 1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snows!
Bronze - 30 pcs. per ctn.
Code
Price
SGBR95
Aluminum - 50 pcs. per ctn.
Code
Galvanized Malleable Iron - 30 pcs. per ctn.
Price
Code
SGAL95
Price
SGML95
Loop the Loop Snow Guards for Asphalt Shingle, Slate and Cedar Shake
Roofs - 300 pcs. per ctn.
The Loop the Loop snow guard is an economy guard for wood deck applications under slate, wood shakes or asphalt shingles.
Recommended snow guards per square: 1/4 pitch roof - 50 snow guards, 1/3 pitch roof - 75 snow guards, 1/2 pitch roof - 150 snow
guards. Loop the Loop snow guard does not follow the typical layout pattern as seen on page 13. This style snow guard requires total
roof coverage. Please call Berger at (800) 523-8852 for more information.
Copper
Code
Price
SGLLC1
Mullane BRONZE GUARD™ Model #100 Series- 50 pcs. per ctn.
A traditional spike style snow guard, from a design first patented in 1899. The Model #100 is historically accurate for period
restorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile,
this model is more appropriate for residential usage. The Model #100 is for applications on slate, shake, and shingle roofs, and is
designed to fit between adjacent pieces of roof material, so that only the casting is visible above the roof surface.
Soldering
#100 Series for Soldering
Bronze
Code
Lead Coated Copper
Price
100CPSM
Code
Price
100LCPSM
#100 Series for Nailing on New Installations (Slate or Shingles)
Nailing
Bronze for Slate Applications
Code
Price
100S-NA
Lead Coated for Slate Applications
Code
Bronze for Asphalt Shingle Applications
Price
100SLC-NA
Code
Price
100S-AS
#100 Series with Retro-Hook for Existing Slate Roofs
Bronze
Retro Hook
Code
100S-RH
Lead Coated Copper
Price
Code
Price
100SLC-RH
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
This spike style snow guard is fabricated from the same sheet metal components as the #100, but the #200 casting is 30% larger
than the #100. Both products are equally strong and effective in their capacity to hold snow on the roof, but the Model #200S is more
appropriate to larger scale buildings, or where the roof material is thicker than usual, such as tile roofing.
Soldering
Bronze
Code
Lead Coated Copper
Price
200CPSM
Nailing
Price
200LCPSM
Code
Price
200S-NA
Retro Hook
Code
Code
Price
Code
200SLC-NA
Price
200S-AS
Bronze
Compressible Hook for Retro Fit
Code
Lead Coated Copper
Price
200S-RH
Code
Price
200SLC-RH
#200 Series with Hook for New Installations (Tile Roofs)
Bronze
Tile Roofs
New Installations Only.
Hook does not Compress.
Code
Lead Coated Copper
Price
200CPT
200LCPT
A solid bronze pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 24 oz. copper
installation base flange by four solid copper rivets for extreme durability and snow load bearing capacity. The solid bronze casting
eliminates the corrosion problem caused by condensation which is formed inside of closed, pressed copper snow guards. The
installation flange can be easily fabricated to any length for any roof application, and is also available with our Retro-Hook.
Soldering
Bronze
Code
Lead Coated Copper
Price
300CPSM
Code
Price
300LCPSM
Nailing
Code
Price
300S-NA
Code
Price
300SLC-NA
Code
Price
300S-AS
Bronze
Retro Hook
Compressible Hook for Retro Fit
Code
300S-RH
Lead Coated Copper
Price
Code
Price
300SLC-RH
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 9
1/07
Page 10
1/07
This "Classic" BRONZE GUARD™ series features large (approximately 4” x 4”) decorative bronze castings in Eagle, Oak Leaf, or FleurDe-Lis designs. The castings are mounted on solid 1" x 1/8" copper bar stock with solid brass bolts. The installation bar is predrilled
for easy installation. While they are decorative elements, they are also extremely durable and are capable of holding extreme loads.
They are typically installed in two rows along the eaves with subsequent rows of low profile guards to supplement the necessary
snow holding design load.
Eagle Design
#400 Series, Eagle Design
Bronze
Code
Bronze Patina
Price
400EGLBRZ
Code
Price
400EGLPAT
#400 Series, Oak Leaf Design
Oak Leaf Design
Bronze
Code
Bronze Patina
Price
400LEAFBRZ
Code
Price
400LEAFPAT
#400 Series, Fleur-de-Lis Design
Bronze
Fleur-de-Lis Design
Code
Bronze Patina
Price
400FDLBRZ
Code
Price
400FDLPAT
Mullane SNOW BOSS™ Model #630 for Metal Roofs - 50 pcs. per ctn.
SNOW BOSS #630 are solid cast aluminum snow guards and are best used for curtain wall systems, window wells or cornice shelves.
Typical installation is by means of high strength adhesives (SB-190) that develop superior peel and shear bonding strength on modern
metal roofs coated with plastic resin paints such as Kynar®. These aluminum guards are available mill finished or custom color matched
using Dupont® Imron enamels. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.
Code
Price
630M
Code
Price
630C
SNOW BOSS #640 are "traditional shaped", solid cast aluminum snow guards for the mid-panel application on all standing, batten,
and flat seam (non-copper) metal roofs. Typical installation is by means of high strength adhesives (SB-190) that develop superior
peel and shear bonding strength on modern metal roofs coated with plastic resin paints such as Kynar®. These aluminum guards are
available mill finished or custom color matched using Dupont® Imron enamels. Adhesive failure does not constitute Berger product
defect and is not the responsibility of Berger.
Code
640M
Price
Code
Price
640C
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
SNOW BOSS #650 Series is constructed with durable UV resistant polycarbonate and is compatible with all non-copper metal roof
systems. The Model #650 includes a new patent pending base design, which is the latest technological advance in adhesive mounted
(SB-190) snow guard systems. This cross hatch design strengthens adhesive grip by increasing surface area and texture, and
provides for faster solvent escape, and adhesive curing. The series of evenly spaced holes in the base allow the solvents to dissipate
quickly, and become “glue rivets” when the adhesive keys in the holes for a more secure application. Adhesive failure does not
constitute Berger product defect and is not the responsibility of Berger.
Clear Polycarbonate
Code
Price
650C
SNOW BOSS #690 are a decorative, spoked, half-round designed solid cast aluminum snow guards. They are well suited for the midpanel application on all standing, batten, and flat seam (non-copper) metal roofs. Typical installation is by means of high strength
adhesives (SB-190) that develop superior peel and shear bonding strength on modern metal roofs coated with plastic resin paints
such as Kynar®. These aluminum guards are available mill finished or custom color matched using Dupont® Imron enamels. Adhesive
failure does not constitute Berger product defect and is not the responsibility of Berger.
Code
Price
690M
Code
Price
690C
Mullane Model #500 Bronze Guard™ Snow Fence Bracket (for 3 Pipes)
The Model #500 Snow Fence Bracket is cast from solid bronze for lifetime durability. The castings have been carefully engineered to
assure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard, and give
redundant protection against casting failure when under load. Holes for rails are 1.125” to accommodate 1.05” (od) brass pipe. The
brackets are available in three angles: 90, 67.5, and 45 degrees. The base plate is 1/8" 220 bronze. The Model #500 is typically
installed along the perimeter of slate roofs with rafters up to 25 ft. in areas with moderate to high snow falls. The Model #500 is a
custom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe, Couplings and End Caps sold separately.
Please call Berger at (800) 523-8852 for more information.
Bronze Bracket & Plate
Code
Price
500BBA
Mullane Fitrite #121 Protector Snow Fence Bracket (for 2 Pipes)
The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11 gauge
galvanized steel plate. The brackets accommodate two .080” (od) galvanized pipes. The Fitrite #121 is typically installed on slate roofs
with rafters not over 18 ft. in areas with moderate snow falls. The Fitrite #121 is a custom order and the base plate can be fabricated
to any specified size. 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more
information.
Galv. Malleable Iron Bracket & Steel Plate
Code
Price
FR121ML
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 11
1/07
Page 12
1/07
Mullane Fitrite #122 Protector Snow Fence Bracket (for 2 Pipes)
The Model #122 Snow Fence Bracket is cast in bronze for durability. The castings are mounted on an 11 gauge galvanized steel plate.
The brackets accommodate two .080” (od) brass pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft.
in areas with moderate snow falls. The Fitrite #122 is a custom order and the base plate can be fabricated to any specified size. 1/2"
Red Brass Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information.
Bronze Bracket & Brass Plate
Code
Price
FR122ML
Mullane Fitrite #124 Mini Protector Snow Fence Bracket (for 2 Pipes)
The Fitrite #124 Mini Protector Snow Fence Bracket is cast in malleable iron for durability. The castings are mounted on a solid
galvanized steel plate, 2" x 12", with pre drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2”
galvanized pipes. Brackets are adjustable to the roof pitch. The Model #124 should be used only where low to moderate snowloads
are anticipated and can be mounted to most any roof surface. The Fitrite #124 is availble in cast bronze or galvanized malleable iron.
1/2" Red Brass Pipe or 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more
information.
Cast Bronze
Code
Price
FR124BRZ
Code
Price
FR124ML
Mullane Fitrite #131 Snow Fence Bracket (for 3 Pipes)
The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefully
engineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3
galvanized iron, bronze, brass or stainless steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. The
brackets are adjustable to various roof pitches. The base plate is 11 gauge galvanized steel, sized to the slate dimension, and
predrilled and countersunk for fasteners. Bolts are Grade 5 zinc plated steel. The Fitrite #131 is a custom order and the base plate can
be fabricated to any specified size. 3/4" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 5238852 for more information.
Malleable Iron Bracket & Galv. Steel Plate
Code
Price
FR131ML
Mullane Fitrite #132 Snow Fence Bracket (for 3 Pipes)
The Model #132 Snow Fence Bracket is cast from solid bronze for durability. The castings have been carefully engineered to assure
maximum strength at the points of the greatest stress when under load. The Model #132 accommodates 3 brass, bronze or stainless
steel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. The
base plate is 1/8" commercial bronze or brass plate, sized to the slate dimension, and predrilled and countersunk for fasteners. Bolts
are solid brass. The Fitrite #132 is a custom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe,
Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information.
Bronze Bracket & Brass Plate
Code
Price
FR132BR
Mullane Fitrite Fence Bracket for Tile Roofs:
Available for Spanish or Ludowici, Roman, Provincial, Designer & MissionTiles. Please call for additional information and pricing.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Snow Guard Guidelines
DETERMINING THE PROPER AMOUNT OF TORQUE FOR SET SCREWS will vary depending on the type and gauge of metal roofing. The recommended
method for determining proper torque is to install one unit first, with blade on the uphill side. After tightening the set screws, loosen and remove the unit,
inspecting the indentations created in the seam to see that proper compression was obtained. Remember, the screw closest to the blade is the real workhorse as
it derives its strength from the blade, and if extra torque is needed, apply it to this screw.
WHEN MECHANICALLY FASTENING SNOW GUARDS, use sealant or neoprene washers to ensure watertight seals. It is imperative to secure these products
to a structural membrane rafter or purlin at least 1.5 inches deep.
Berger Building Products, Inc (BBPI) snow guards are devices that are attached to the roof structure in order to provide uniform retention and control the
snow from avalanching in large sheets. The snow guards need to be applied in sufficient quantity according to a prescribed pattern in order to be effective. Snow
Guards are intended to reduce snow movement and provide for a controlled melt and breakdown of the snow mass into smaller sections. Snow guard placement
will vary from region to region and will be influenced by roof pitch, the lengths of roof runs and roof features. Local installation customs may not be the best
guide for placement. Additional information can be found in Sheet Metal and Air Conditioning Contractors' National Association (SMACNA) architectural sheet
metal manual. Ultimately a qualified professional should determine placement.
Snow Guard Pattern Requirements Typical For Shingled Roofing
Berger will provide a custom snow guard pattern recommendation. Please contact us at 800-523-8852 for your custom layout.
Snow guard patterns provided by Berger are only recommendations. Actual snow guard patterns should be approved by a licensed architect.
RIDGE (Top of Roof)
6 to 8 ft.
between groups
2nd group same as 1st
group with spacing pattern
reversed as shown
X
X
3rd row is same as 1st row.
Up 15 in. or
2 rows of shingles
2nd row stagger 15 in.
over central to 1st row,
and 15 in. up roof or 2 rows
of shingles above 1st row
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2nd group should be
approx. 6 to 8ft.
from 1st group; additional
groups may be needed
depending on overall
length of run.
6 to 8 ft.
between groups
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Start 1st row at or
above exterior
load bearing wall
EAVE (Bottom of Roof)
Positioning of Berger snow guards required for effective use: 1 every 40 inches over entire roof, or 2 groups of 3 staggered rows on 30 inch centers with 1
group at the eave and 1 group midway on roof slope. On long slopes, multiple groups with 6 ft. space separation maximum. Snow guards should never be
placed beyond the bearing wall on an extended roof section. This can result in ice damming and cause structural damage.
Berger Building Products, Inc (BBPI) warrants that the products it manufactures shall be free from material defects. Should any of the products prove
defective, the obligation of BBPI under this warranty shall be limited to replacement of the defective product or at our option the cost of the product originally
shipped by Berger. This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for a
particular purpose. There are no warranties, which extend beyond the description on the face hereof. BBPI in no event, whether claim is based on warranties,
contract negligence or otherwise, is liable for incidental or consequential damages.
Berger Building Products, Inc (BBPI) will not be responsible for misapplication or modification of product, incorrect material or defects that were obvious at
time of installation. Any consequential damage, schedule delays, additional labor, and or equipment rental costs will not be BBPI responsibility. Any BBPI product
warranty claim is limited solely to Berger Building Products, Inc.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
SNOW GUARD
TECHNICAL INFORMATION
Page 13
1/07
Page 14
1/07
SYNTHETIC
ROOFING UNDERLAYMENT
Pro-Master Roof Shield UDL™ - Synthetic Roofing Underlayment
•
•
•
•
•
•
•
•
•
UV Stabilized Synthetic Material Rated for One Year Exposure.
Lightweight: 11.2 lbs. for 4 Sq. Roll, 28 lbs. for 10 Sq. Roll.
Printed with Nail Pattern and Alignment Guides.
Anti-Slip Coated for Safety.
52" Width Makes Installation Quicker.
Resists Mold and is Stronger & Lighter than Organic Underlayment.
25 Year Limited Warranty.
May be Used with: Asphalt Shingles, Wood Shakes, Non-Structural Metal Roofing, and Synthetic & Quarry Slate
Florida Building Code Approved for Use in HVHZ (High Velocity Hurricane Zone) as per TAS 104
Woven Black Polypropylene with Polymer
FBC: #FL4855
Roll Size
Size
Pallet Size
Code
4 Square Roll
52" x 92.3'
100 Rolls
PMUDL4
10 Square Roll
52" x 231'
49 Rolls
PMUDL10
Price
SYNTHETIC ROOFING UNDERLAYMENT
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
EURACRAFT
GUTTER SYSTEM™
GUTTER
Page 15
1/07
Half Round Gutter - 5 pcs per ctn.
9.84' Long
18.04' Long
18.04' Long
20 Oz. Copper
18 Oz. Copper
20 Oz. Copper
Size
Code
5"
7.56"
Price
Size
Code
L10E2C5
5"
L10E2C75
Price
Size
Code
L18EC5
5"
L18E2C5
6"
L18EC6
6"
L18E2C6
7.56"
L188EC75
7.56"
L18E2C75
Smooth Round Welded Downspout - 5 pcs per ctn.
9.84' Long
9.84' Long
18 Oz. Copper
20 Oz. Copper
Size
Code
3"
PRPEC3
4"
PRPEC4
4.7"
PRPE8C47
Price
Size
Code
4"
PRPE2C4
Price
Smooth Elbow
• Elbow Angles Available in 40 Degrees (1) and 72 Degrees (3).
ENTER ANGLE CODE WHEN ORDERING
18 Oz. Copper
Size
Pcs. per ctn.
Code
3"
25
PR__EC3
4"
25
PR__EC4
4.7"
15
PR__EC47
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
EURACRAFT
GUTTER SYSTEM™
GUTTER
Fascia Hanger with Spring Tab
18 Oz. Copper
Size
Pieces per Carton
Code
5"
50
GFBHGREC5
6"
50
GFBHGREC6
7.56"
10
GFBHGREC75
Price
J Roof Hanger with Spring Tab
18 Oz. Copper
Size
Pieces per Carton
Code
5"
10
GRFHGREC5
6"
10
GRFHGREC6
7.56"
10
GRFHGREC75
Price
End Cap
18 Oz. Copper
Size
Pieces per Carton
Code
5"
50
CENLHEC5
6"
50
CENLHEC6
7.56"
25
CENLHEC75
5"
50
CENRHEC5
6"
50
CENRHEC6
7.56"
25
CENRHEC75
Price
LEFT
RIGHT
Quarter Ball End Cap
18 Oz. Copper
Size
Pieces per Carton
Code
5"
50
CENBALL5
6"
50
CENBALL6
7.56"
25
CENBALL75
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 16
1/07
End Cap with 2' Gutter
18 Oz. Copper
Size
Pieces per Carton
Code
Price
QUARTER BALL END CAP
5" - left ball
1
EP5BLHEC
6" - left ball
1
EP6BLHEC
7.56"- left ball
1
EP756BLHEC
5" - right ball
1
EP5BRHEC
6" - right ball
1
EP6BRHEC
7.56"- right ball
1
EP756BRHEC
5" - left
1
EP5LHEC
6" - left
1
EP6LHEC
7.56"- left
1
EP756LHEC
5" - right
1
EP5RHEC
6" - right
1
EP6RHEC
7.56"- right
1
EP756RHEC
STANDARD END CAP
Miters - Seamless
18 Oz. Copper
Size
Pieces per Carton
Code
5"
5
LOSSMEC5
6"
5
LOSSMEC6
7.56"
5
LOSSMEC75
5"
5
LISSMEC5
6"
5
LISSMEC6
7.56"
5
LISSMEC75
Price
OUTSIDE
INSIDE
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER
EURACRAFT
GUTTER SYSTEM™
Page 17
1/07
EURACRAFT
GUTTER SYSTEM™
GUTTER
Plug In Outlet (no solder required)
18 Oz. Copper
Size
Pieces per Carton
Code
5" x 3"
25
PINOUT53
6" x 4"
25
PINOUT64
7.56" x 4"
25
PINOUT754
7.56" x 4.7"
25
PINOUT7547
Price
Gutter Outlet (solder type)
18 Oz. Copper
Size
Pieces per Carton
Code
3"
50
RBOCP3
4"
50
RBOCP4
4.7"
50
RBOEC47
Price
Downspout Connector
18 Oz. Copper
Size
Pieces per Carton
Code
3"
50
DSCONNEC3
4"
50
DSCONNEC4
4.7"
50
DSCONNEC47
Price
Downspout Reducer
18 Oz. Copper
Size
Pieces per Carton
Code
100mm to 76mm Dia.
1
REDUC10076
Price
Swan Neck Offset
18 Oz. Copper
Size
Pieces per Carton
Code
3"
25
PROF23EC3
4"
25
PROF23EC4
4.7"
10
PROF23EC47
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 18
1/07
Rainwater Pipe Cleanout
18 Oz. Copper
Size
Pieces per Carton
Code
3"
20
CLNOUT3
4"
12
CLNOUT4
Price
Pipe Clamp Cover
18 Oz. Copper
Size
Pieces per Carton
Code
76mm
10
CLPCVR76
100mm
10
CLPCVR100
Price
Downspout Bracket with Brass Spike
18 Oz. Copper
Size
Pieces per Carton
Code
3"
25
DSHNGBSPK3
4"
25
DSHNGBSPK4
Price
Downspout Bracket with M10 x 3.54" Long Screw THD
18 Oz. Copper
Size
Pieces per Carton
Code
3"
50
DSHNGBSCR3
4"
50
DSHNGBSCR4
4.7"
50
DSHNGBSCR47
Price
Premium Gutter Connector with Rubber Seals
18 Oz. Copper
Size
Pieces per Carton
Code
5"
10
GSPRCONEC5
6"
10
GSPRCONEC6
Price
Standard Gutter Connector with Rubber Seals
18 Oz. Copper
Size
Pieces per Carton
Code
5"
10
GUCONEC5
6"
10
GUCONEC6
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER
EURACRAFT
GUTTER SYSTEM™
Page 19
1/07
EURACRAFT
GUTTER SYSTEM™
GUTTER
Downspout Strainer
18 Oz. Copper
Size
Pieces per Carton
Code
3"
10
DSSTRNEC3
4"
10
DSSTRNEC4
4.7"
10
DSSTRNEC47
Price
Hanger Bending Tool
Size
Pieces per Carton
Code
1
HGRBEND
Price
Downpipe Expander
Size
Pieces per Carton
Code
3"
1
EXPANTOOL3
4"
1
EXPANTOOL4
4.7"
1
EXPANTOOL47
Price
Leaf Guard with Fixing Bracket
18 Oz. Copper
Size
Pieces per Carton
Code
5" and 6"
5
LEAFGDEC5-6
7.56"
5
LEAFGDEC756
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 20
1/07
Page 21
1/07
“K” STYLE EMBOSSED GUTTER & GUTTER COIL
Caesar Circles
Greek Key
Patriot
ENTER STYLE CODE WHEN ORDERING:
Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT)
Metal:
PRODUCT
SIZE
16 OZ. COPPER
LENGTH
Code
K Style Gutter
5"
10'
K10__ __5
K Style Gutter
5"
20'
K20__ __5
K Style Gutter
6"
10'
K10__ __6
K Style Gutter
6"
20'
K20__ __6
Gutter Coil for 5"K
11 3/4"
200' per roll 1134__ __
Gutter Coil for 6"K
15"
200' per roll 15-C__ __
Price
HALF ROUND EMBOSSED GUTTER & GUTTER COIL
Caesar Circles
Greek Key
Patriot
ENTER STYLE CODE WHEN ORDERING:
Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT)
Metal:
PRODUCT
SIZE
16 OZ. COPPER
LENGTH
Code
Half Round Gutter
5"SB
10'
L10__ __5
Half Round Gutter
5"SB
20'
L20__ __5
Half Round Gutter
6"SB
10'
L10__ __6
Half Round Gutter
6"SB
20'
L20__ __6
Gutter Coil for 5"HR
10"
200' per roll 10-C__ __
Gutter Coil for 6"HR
11 5/8"
200' per roll 1158__ __
Price
U. S. Patent 6,314,685 and Patent Pending
Please Call for Lead Times and Delivery on All Embossed Gutter.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER
EMBOSSED GUTTER & COIL
Page 22
1/07
“K” STYLE GUTTER
GUTTER
Dimensions for Standard Gutter Sizes
LOC.
A
B
C
D
E
F
G
4K
3 1/8"
2 3/4"
2 7/8"
9/16"
4"
7/16"
1/2"
5K
3 5/8"
3 3/8"
3 5/8"
9/16"
5"
9/16"
1/2"
6K
4 7/8"
3 7/8"
4 5/8"
1"
6"
5/8"
9/16"
7K
5 7/8" 4 9/16"
6"
1"
7"
5/8"
5/8"
8K
7 1/4"
7"
1"
8"
5/8"
5/8"
SIZE
5 3/8"
Aluminum K Style Gutter is Hemback Style
Copper, Galvanized and Painted Steel are Straight Back Style
All K Style Gutter is Roll-Formed
•
AVAILABLE LENGTHS
SIZE
4"K
5"K
6"K
7"K
8"K
LENGTH
10'
20'
10'
16'
20'
21'
26'
30'
32'
10'
16'
20'
21'
30'
32'
10'
10'
ALUMINUM
COPPER
Painted
Aluminum
0.027
Painted
Aluminum
0.032
Mill
Finished
N/A
N/A
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• .024
• .024
• .024
• .024
• .024
• .024
• .024
• .032
• .032
• .032
• .032
• .032
• .032
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GALV. STEEL
16 ounce
20 ounce
24 gauge
26 gauge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
N/A
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
N/A
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P-STEEL
P-GRIP
Painted
Gal. Steel
26 gauge
Paintgrip
26 gauge
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
N/A
N/A
N/A
N/A
.027 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Satin White Royal Brown Black Clay (.024 Only)
.032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown Dark Bronze (6K Only)
26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: White Brown
7"K and 8"K are Available in Longer Lengths with Extended Lead Times.
PACKAGING:
ALUMINUM: 10' to 21' = 10 pcs. per ctn. 22'+ and 6"K = 5 pcs. per ctn.
COPPER:
5"K: 10' to 21' = 5 pcs. per ctn. 5"K: 22'+ = 4 pcs. per ctn.
6"K: 10' to 17' = 5 pcs. per ctn.
6"K: 18'+ = 4 pcs. per ctn.
Standard Product May Vary from SMACNA Guidelines. Use Berger Hangers to Avoid Possible Oil Canning on Face of Gutter.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 23
1/07
“K” STYLE 90 DEGREE APRON GUTTER
SIZE
LENGTH
5" K
5" K
6" K
6" K
COPPER
GALV.
Painted
Aluminum
0.032
ALUMINUM
Mill
Finished
0.032
16 ounce
26 gauge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10'
20'
10'
20'
.032 PAINTED ALUMINUM COLORS AVAILABLE:
High Gloss White Royal Brown Dark Bronze
“K” STYLE HI-BACK GUTTER
Dimensions for Hi-Back Gutter Sizes
LOC.
A
B
C
D
E
F
G
H
5K
3 5/8"
3 3/8"
3 5/8"
9/16"
5"
9/16"
1/2"
3"
6K
4 7/8"
3 7/8"
4 5/8"
1"
6"
5/8"
9/16"
2 9/16"
SIZE
•
AVAILABLE LENGTHS
SIZE
5" K
6" K
5" K
6" K
5" K
6" K
LENGTH
10'
10'
20'
20'
30'
30'
ALUMINUM
COPPER
GALV.
P-STEEL
Painted
Aluminum
0.032
Mill
Finished
16 ounce
26 gauge
26 gauge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
.032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown
Dark Bronze
26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: White Brown
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER
“K” STYLE APRON GUTTER
Page 24
1/07
HALF ROUND GUTTER
GUTTER
Dimensions for Standard Gutter Sizes
LOC.
A
B
C
Girth
4SB
2"
1/2"
4"
8 1/2"
5SB
2 1/2"
1/2"
5"
10"
6SB
3"
9/16"
6"
11 1/2"
7SB
3 1/2"
5/8"
7"
13 1/8"
8SB
4"
5/8"
8"
15"
SIZE
•
AVAILABLE LENGTHS
SIZE LENGTH
4"SB
5"SB
6"SB
7"SB
8"SB
10'
20'
10'
20'
25'
30'
10'
20'
25'
30'
10'
10'
ALUMINUM
COPPER
Painted
Aluminum
0.027
Painted
Aluminum
0.032
Mill
Finished
N/A
N/A
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• .024
• .024
• .024
• .024
• .032
• .032
• .032
• .032
•
•
N/A
N/A
N/A
N/A
N/A
N/A
GALV. STEEL
P-GRIP
16 ounce
20 ounce
24 gauge
26 gauge
Paintgrip
26 gauge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
.027 and .032 PAINTED ALUMINUM COLORS AVAILABLE: High Gloss White Royal Brown
20 Oz. Copper 7"SB and 8"SB are Available with Extended Lead Times. Manufactured Without Break Lines.
DOUBLE BEAD HALF ROUND GUTTER &
SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE
SIZE
DOUBLE BEAD
This Gutter Requires Berger
Regal Double Bead Bar Hanger
Listed on Page 35.
SINGLE BEAD
WITH 1" FLANGE
This Gutter Requires Berger
Regal Single Bead Flange
Gutter Roof Strap Hanger
Listed on Page 36.
5" DB
6" DB
5" DB
6" DB
5" SB w/1" FL
6" SB w/1" FL
LENGTH
10'
10'
20'
20'
10'
10'
Copper
16 ounce
Galv. Steel
26 gauge
Paintgrip
26 gauge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PACKAGING FOR DOUBLE BEAD HALF ROUND GUTTER: ALUMINUM: 10' to 26' = 10 pcs. per ctn. 27'+ = 5 pcs. per ctn.
COPPER: 5"HR: 10' to 25' = 5 pcs. per ctn. 5"HR: 26'+ = 4 pcs. per ctn. 6"HR: 10' to 21' = 5 pcs. per ctn. 6"HR: 22'+ = 4 pcs. per ctn.
PACKAGING FOR SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE: COPPER: 5 pcs. per ctn.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 25
1/07
ROUND DOWNSPOUTS
Plain Round Downspout 3" & 4" Alum. - 100'/ctn.
5" & 6" MF Alum. - 50'/ctn.
3", 4" & 5" Copper - 50'/ctn.
6" Copper - 30'/ctn.
Galv. Steel - No Box
ALUMINUM:
• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss
White (HG), Royal Brown (BR) and Dark Bronze (DB).
• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only.
COPPER:
• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce.
GALVANIZED STEEL:
• 2" Galvanized Steel is Available in 26 Gauge Only.
• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG).
• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26).
PAINTGRIP:
• 3", 4", 5" & 6" Paintgrip is Available in 26 Gauge Only.
ENTER COLOR/GAUGE CODE WHEN ORDERING
Painted Aluminum
Mill Finished Alum.
Price
Code
Price
16 Oz. Copper
Code
Price
Galvanized Steel
Code
Price
Paintgrip
Size
Code
Code
2"
N/A
N/A
PRPCP2
PRP262
N/A
3"
PRP__ __3
PRPMF3
PRPCP3
PRP__ __3
PRPPG3
4"
PRP__ __4
PRPMF4
PRPCP4
PRP__ __4
PRPPG4
5"
N/A
PRPMF5
PRPCP5
PRP__ __5
PRPPG5
6"
N/A
PRPMF6
PRPCP6
PRP__ __6
PRPPG6
Price
DOWNSPOUTS
Metal:
Round Corrugated Downspout 3" & 4" Alum. - 100'/ctn.
5" & 6" MF Alum. - 50'/ctn.
3", 4" & 5" Copper - 50'/ctn.
6" Copper - 30'/ctn.
ALUMINUM:
• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss
White (HG), Royal Brown (BR) and Dark Bronze (DB).
• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only.
COPPER:
• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce.
GALVANIZED STEEL:
• 2" Galvanized Steel is Available in 26 Gauge Only.
• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG).
• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26).
PAINTGRIP:
• 3", 4" & 5" Paintgrip is Available in 26 Gauge Only.
Metal:
Painted Aluminum
Price
Mill Finished Alum.
Code
Price
16 Oz. Copper
Code
Price
Galvanized Steel
Code
Price
Paintgrip
Size
Code
Code
2"
N/A
N/A
N/A
RCP262
N/A
3"
RCP__ __3
RCPMF3
RCPCP3
RCP__ __3
RCPPG3
4"
RCP__ __4
RCPMF4
RCPCP4
RCP__ __4
RCPPG4
5"
N/A
RCPMF5
RCPCP5
RCP__ __5
RCPPG5
6"
N/A
RCPMF6
RCPCP6
RCP__ __6
N/A
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 26
1/07
SQUARE DOWNSPOUTS
Plain Square Downspout - 50'/ctn.
• Painted Aluminum is Available in High Gloss White (W), Royal Brown (B) and Dark Bronze (Z).
• Painted Galvanized Steel is Available in White (WS) and Brown (BS).
ENTER COLOR CODE WHEN ORDERING
Metal:
.032 Painted Alum.
.032 Mill Fin. Alum.
Price
Code
Price
16 Oz. Copper
Code
26 Ga. Galv. Steel
Price
Code
Price
Paintgrip
Code
Price
Painted Galv. Steel
Size
Code
Code
2" x 3"
N/A
N/A
PSCP23
N/A
N/A
N/A
3" x 4"
PS3__34
PS3MF3
PSCP34
PSGL34
PSPG34
PS__ __34
4" x 5"
PS3__45
PS3MF4
PSCP45
PSGL45
PSPG45
PS__ __45
5" x 6"
PS3__56
PS3MF5
PSCP56
PSGL56
PSPS56
PS__ __56
Price
Square Corrugated Downspout DOWNSPOUTS
Alum. & MF Alum. - 100'/ctn.
Painted Galv. Steel - 50'/ctn.
Copper - 50'/ctn.
•
•
•
•
•
•
•
•
•
•
•
Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Clay (CL).
Painted Aluminum 2" x 3" is Also Available in Satin White (SW), Black (BK) and Ivory (IA).
2" x 2" Galvanized Steel is Available in 26 Gauge Only.
2" x 3", 3" x 4" and 4" x 5" Galvanized Steel are Available in 24 Gauge (24), 26 Gauge (26) and 28 Gauge (28).
Painted Galvanized Steel is Available in White (WS) and Brown (BS).
2" x 3" Painted Aluminum is .019 Standard, .016 Economy (White Only) and .024 Commercial (White Only).
3" x 4" Painted Aluminum is Available in .019 and .024.
4" x 5" Painted Aluminum is .024 Standard.
2" x 3" Mill Finished Aluminum is .019 Standard.
3" x 4" and 4" x 5" Mill Finished Aluminum is .024 Standard.
Stainless Steel and 20 Oz. Copper are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks.
Special Orders are Not Subject to Cancellation or Return.
• 2" x 3" and 3" x 4" Square Corrugated Downspout is Now Available in Custom Lengths Please Call for Lead Times and Any
Minimum Order Requirements that may Apply.
• Requesting Longer Lengths of Downspouts may Increase the Possibility for Pipe to Exceed the Normal Material Tolerances and
may Lead to Potential Mounting Problems.
Metal:
Painted Aluminum
.032 Mill Fin. Alum.
Size
Code
Code
2" x 2"
N/A
N/A
SCPCP2
SCP262
N/A
N/A
2" x 3"
Call for Code
SCPMF3
SCPCP3
SCP__ __3
SCPPG3
SCP__ __3
3" x 4"
Call for Code
SCPMF4
SCPCP4
SCP__ __4
SCPPG4
SCP__ __4
4" x 5"
SCP__ __5
SCPMF5
SCPCP5
SCP__ __5
SCPPG5
SCP__ __5
Price
Price
16 Oz. Copper
Code
Price
26 Ga. Galv. Steel
Code
Price
Paintgrip
Code
Price
Painted Galv. Steel
Code
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 27
1/07
ROUND ELBOWS
Plain Round and Round Corrugated Elbows 3" & 4" Alum. - 30 pcs./ctn.
5" & 6" Alum. & Galv. - 10 pcs./ctn.
3" & 4" Galv. - 20 pcs./ctn.
Copper Elbows - 10 pcs./ctn.
All 2" - 20 pcs./ctn.
• Elbow Angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0).
• Elbow Angles Specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead
Time. Special Orders are Not Subject to Cancellation or Return.
• 3" & 4" Aluminum Elbows are Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).
• 5" & 6" Aluminum Elbows are Available in Mill Finished Only.
• 3" Aluminum Elbows are .019 Standard Gauge.
• 4" & 5" Aluminum Elbows are .024 Standard Gauge.
• All Lap Joined Elbows Must be Soldered or Sealed Prior to Installation.
ENTER COLOR/METAL/ANGLE CODE WHEN ORDERING
Metal:
Aluminum
Size
Code
16 Oz. Copper
Price
Code
Price
26 Gauge Galvanized Steel
Code
Paintgrip
Price
PLAIN ROUND
2"
N/A
PR3CP2
PR63P2
N/A
3"
PR3 __ __3
PR3CP3
PR63P3
PR63G3
4"
PR3 __ __4
PR3CP4
PR63P4
PR63G4
5"
PR3MF5
PR3CP5
PR63P5
PR63G5
6"
PR3MF6
PR3CP6
PR63P6
N/A
ROUND CORRUGATED
N/A
RC3CP2
RC63P2
N/A
3"
RC3 __ __3
RC3CP3
RC63P3
RC63G3
4"
RC3 __ __4
RC3CP4
RC63P4
RC63G4
5"
RC3MF5
RC3CP5
RC63P5
RC63G5
6"
RC3MF6
RC3CP6
RC63P6
N/A
GUTTER ACCESSORIES
2"
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 28
1/07
SQUARE ELBOWS
Plain Square Elbows
•
•
•
•
•
All Plain Square Elbows are Special Items and may Require Additional Lead Time.
All Plain Square Elbows are Bent at a 75 Degree Angle. Plain Square Elbows are NOT Crimped. They must be Hand Crimped in the Field.
Aluminum Elbows are Available in High Gloss White (W), Royal Brown (B) and Mill Finished (M).
Stainless Steel is a Special Order and may Require Extended Lead Time of at Least 2 Weeks.
Special Order Elbows are Not Subject to Cancellation or Return.
ENTER COLOR/ANGLE CODE WHEN ORDERING
METAL:
16 Oz. Copper
Price
Code
Code
2" x 3" - A Style
N/A
PSAC23
N/A
2" x 3" - B Style
N/A
PSBC23
N/A
3" x 4" - A Style
PSA__34
PSAC34
PSA634
3" x 4" - B Style
PSB__34
PSBC34
PSB634
4" x 5" - A Style
PSA__45
PSAC45
PSA645
4" x 5" - B Style
PSB__45
PSBC45
PSB645
5" x 6" - A Style
PSA__56
PSAC56
PSA656
5" x 6" - B Style
PSB__56
PSBC56
PSB656
Square Corrugated Elbows - 30 pcs./ctn.
Style A
26 Ga. Galv. Steel
Size:
Style A
Style B
.032 Aluminum
Price
Code
Price
Copper Elbows - 10 pcs./ctn. All 2" - 20 pcs./ctn.
• Elbow angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0).
• Elbow angles specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead
Time.
• Aluminum Elbows are Available in Mill Finished and also in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB),
Clay (CL) - 2" x 3" Only and Satin White (SW) - 2" x 3" Only.
• 2" x 3" Aluminum Elbows are .016 Standard Gauge.
• 3" x 4" Aluminum Elbows are .019 Standard Gauge.
• Painted Galvanized Steel Elbows are Available in White (WS) and Brown (BS).
• Special Order Elbows are Not Subject to Cancellation or Return.
Style B
ENTER COLOR/ANGLE CODE WHEN ORDERING
METAL:
Aluminum
Price
Mill Finished Alum.
Code
Price
16 Oz. Copper
Code
Price
26 Ga. Galv. Steel
Code
Price
26 Ga. Paint Galv. Steel
Code
Price
Paintgrip
GUTTER ACCESSORIES
Size:
Code
Code
2" x 2"
N/A
N/A
SA3CP2
SA63P2
N/A
N/A
2" x 3" - A Style
SA__ __ 33
SA3MF3
SA3CP3
SA63P3
SA3 __ __3
SA63G3
2" x 3" - B Style
SB__ __ 33
SB3MF3
SB3CP3
SB63P3
SB3 __ __3
N/A
3" x 4" - A Style
SA__ __ 34
SA3MF4
SA3CP4
SA63P4
SA3 __ __4
SA63G4
3" x 4" - B Style
SB__ __ 34
SB3MF4
SB3CP4
SB63P4
SB3 __ __4
N/A
4" x 5" - A Style
SA__ __ 35
SA3MF5
SA3CP5
SA63P5
SA3 __ __5
SA63G5
4" x 5" - B Style
SB__ __ 35
SB3MF5
SB3CP5
SB63P5
SB3 __ __5
N/A
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 29
1/07
ROUND & SQUARE OFFSETS
Plain Round Offsets - 10 pcs. per ctn
"D"
"X"
• .019 Aluminum Offsets are Available in White (WA) Only.
• Copper (CP) is Available in 16 Oz. Only.
• Galvanized Steel (GS) is Available in 26 Gauge Only.
"H"
"O"
Pipe Size
Offset "O"
Diameter "D"
"X"
Height "H"
Code
3" PR
1.5"
3"
2.5"
9.2"
OFPR3__ __15
3" PR
3"
3"
2.5"
12.0"
OFPR3__ __3
3" PR
4"
3"
2.5"
13.5"
OFPR3__ __4
3" PR
5"
3"
2.5"
14.5"
OFPR3__ __5
4" PR
1.5"
4"
3"
11.4"
OFPR4__ __15
4" PR
3"
4"
3"
14.1"
OFPR4__ __3
4" PR
4"
4"
3"
15.9"
OFPR4__ __4
4" PR
5"
4"
3"
17.7"
OFPR4__ __5
Square Corrugated Offsets - 10 pcs. per ctn
"W"
"L"
Price
"X"
• .019 Aluminum Offsets are Available in White (WA) Only.
• Copper (CP) is Available in 16 Oz. Only.
• Galvanized Steel (GS) is Available in 26 Gauge Only.
"H"
"O"
Offset "O"
Length "L"
Width "W"
"X"
Height "H"
Code
2" x 3" Sq. Corr.
1.5"
3"
2"
2.5"
9.2"
OFSC3__ __15
2" x 3" Sq. Corr.
3"
3"
2"
2.5"
12.0"
OFSC3__ __3
2" x 3" Sq. Corr.
4"
3"
2"
2.5"
13.5"
OFSC3__ __4
2" x 3" Sq. Corr.
5"
3"
2"
2.5"
14.5"
OFSC3__ __5
3" x 4" Sq. Corr.
1.5"
4"
3"
3"
11.4"
OFSC4__ __15
3" x 4" Sq. Corr.
3"
4"
3"
3"
14.1"
OFSC4__ __3
3" x 4" Sq. Corr.
4"
4"
3"
3"
15.9"
OFSC4__ __4
3" x 4" Sq. Corr.
5"
4"
3"
3"
17.7"
OFSC4__ __5
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Pipe Size
Page 30
1/07
“K” STYLE HANGERS
40K Fascia Hanger with Snap Strap - 50 pcs. per ctn.
• 5" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA) and Mill Finished (KMF).
• 6" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA), Dark Bronze (KDB) and Mill Finished (KMF).
• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).
Metal:
Aluminum
Copper
Price
Code
Galvanized Steel
Price
Code
Price
Painted Galvanized Steel
Size
Code
Code
4"
N/A
40KCP4
40KGL4
N/A
5"
40__ __ __5
40KCP5
40KGL5
40K__ __5
6"
40__ __ __6
40KCP6
40KGL6
40K__ __6
41K Rafter Hanger with Snap Strap - 50 pcs. per ctn.
• 5" & 6" Painted Aluminum Available in High Gloss White (KWA) and Royal Brown (BRA).
Metal:
Painted Aluminum
Price
Copper
Size
Code
Code
Price
5"
41__ __ __5
41KCP5
6"
41__ __ __6
41KCP6
“K” Snap Strap Only for #40 & #41 Hangers - 50 pcs. per ctn.
• Aluminum Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF).
ENTER COLOR CODE WHEN ORDERING.
Metal:
Size
Aluminum
Code
Copper
Price
One Size SNS__ __ __
Code
Price
SNS-CP
Premium K-Style Fascia Hanger with Crossbar - 50 pcs. per ctn.
GUTTER ACCESSORIES
• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).
• 6" Painted Aluminum Available in High Gloss White Only.
• Recommended Hanger for Extreme Snow Areas.
Metal:
Painted Aluminum
Price
Copper
Size
Code
Code
5"
5PF__ __C
5PFCCP
6"
6PFHGC
6PFCCP
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 31
1/07
Crossbar Only for Premium K-Style Fascia Hanger - 50 pcs. per ctn.
• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).
Metal:
Painted Aluminum
Price
Copper
Size
Code
Code
5"
5PCB__ __
5PCBCP
6"
6PCB__ __
6PCBCP
Price
R-5 Rafter Hanger with Crossbar - 50 pcs. per ctn.
• Painted Aluminum Available in High Gloss White Only.
• Recommended Hanger for Extreme Snow Areas.
Metal:
Painted Aluminum
Size
Code
5"
R5HGCB
Price
K-Style Hidden Hanger - 100 pcs. per ctn.
Metal:
Standard Box - 100 pcs./ctn.
Bulk Box - 500 pcs./ctn.
Size
Code
Price
Code
5"
HHMT-5
HHMTB-5
6"
HHMT-6
N/A
Price
K-Style Hidden Hanger with Screw for Straight Back Gutter 5" Alum. - 100 pcs./ctn.
6" Alum. - 75 pcs./ctn.
Economy Model
Mill Finished Alum.
Price
Copper With Screw
Code
Price
Copper Without Screw
Code
Price
Economy Mill Fin. Alum.
Size
Code
Code
5"
HID5S
HIDC5S
HIDC5
HID5SE
6"
HID6S
HIDC6S
HIDC6
HID6SE
Price
K-Style Hidden Hanger with Screw for Hem Back Gutter - 100 pcs./ctn.
Metal:
Size
Code
5"
HID5SH
6"
HID6SH
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Metal:
Page 32
1/07
K-Style Heavy Duty Hidden Hanger for Straight or Hem Back Gutter 50 pcs. per ctn.
• Hanger has Hole to Accept Standard Rod & Nut Assembly for Use as a Roof Mount Application.
Metal:
Size
Code
Price
5"
HHMF-5
6"
HHMF-6
Custom Crossbar Hanger - 50 pcs. per ctn.
• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..
Metal: Mill Finished Aluminum-.125"
Price
Brass-.125"
Code
Price
Stainless Steel-.125"
Size
Code
Code
5"
N/A
CB5-BS
CB5-SS
6"
CB6-MF
CB6-BS
CB6-SS
7"
CB7-MF
CB7-BS
CB7-SS
8"
CB8-MF
CB8-BS
CB8-SS
Price
K-Style Wrap Around Hanger - 50 pcs. per ctn.
• 5" Aluminum Available in High Gloss White (WA), Royal Brown (BR) and Mill Finished (MF).
• 6" Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BR).
• 5" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).
Metal:
Aluminum
Copper
Price
Code
Galvanized Steel
Price
Code
Price
Size
Code
Code
5"
KWH__ __5
KWHCP5
KWHGL5
KWH__ __5
6"
KWH__ __6
KWHCP6
KWHGL6
N/A
GUTTER ACCESSORIES
Hidden Canadian Bar Hanger - 50 pcs. per ctn.
Metal:
Size
Code
5"
CBH-MF
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 33
1/07
Gutter Spike - Aluminum 500 pcs. per ctn., Copper & Galvanized 100 pcs. per ctn.
• 7" & 8" Painted Aluminum Available in White (WA) and Royal Brown (BR).
• 7" & 8" Painted Galvanized Steel Available in White (WS) and Brown (BS).
Metal:
Painted Aluminum
Copper
Price
Code
Galvanized Steel
Price
Code
Size
Code
Price
Code
Price
7"
SPK__ __7
SPKCP7
SPKGL7
SPK__ __7
8"
SPK__ __8
SPKCP8
SPKGL8
SPK__ __8
Ferrule - 100 pcs. per ctn.
• Bulk Orders are Packed 500 pcs. per ctn..
• 5" & 6" Painted Galvanized Steel Available in White Only.
Metal:
Mill Finished Alum.
Copper
Price
Code
Galvanized Steel
Price
Code
Price
Painted Galv. Steel
Code
Price
Plastic
Size
Code
Code
4"
N/A
FERCP4
FERGL4
N/A
N/A
5"
FERMF5
FERCP5
FERGL5
FERWS5
FERPL5
5" Bulk
FERBM5
N/A
FERGB5
N/A
N/A
6"
FERMF6
FERCP6
N/A
FERWS6
N/A
6" Bulk
FERBM6
N/A
FERGB6
N/A
N/A
Price
“J” Bracket used with 5", 6", 7" & 8" High Back Gutter
Metal:
Mill Finish Alum. - 100 pcs./ctn.
Size
Code
One Size
JBRACK
Price
Brass - 50 pcs./ctn.
Code
Price
JBRACB
Metal:
Size
Code
5"
RBRHMF
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Roof Bar Hanger with Rod & Nut - 100 pcs. per ctn.
Page 34
1/07
HALF ROUND HANGERS
Gem Circle with Spring Clip, Nut & Bolt - 50 pcs. per ctn.
• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).
• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).
Metal:
Aluminum
Copper
Price
Galvanized Steel
Code
Price
Code
Price
Size
Code
Code
Price
4"
N/A
CIRCP4
CIRCS4
N/A
5"
CIR __ __5
CIRCP5
CIRCS5
CIR__ __5
6"
CIR__ __6
CIRCP6
CIRCS6
CIR__ __6
#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn.
Metal:
Copper
Size
Code
4"
CCC104
Galvanized Steel
Price
Code
Price
CCS104
#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn.
• 5" & 6" Aluminum Available in High Gloss White (CHG), Royal Brown (CBA) and Mill Finished (A10).
Metal:
Aluminum
Copper
Price
Code
Galvanized Steel
Size
Code
Price
Code
5"
CB__ __ __5
CCC105
CCS105
6"
CB__ __ __6
CCC106
CCS106
Price
Face Mount Hanger with Crossbar and Spring Clip - 50 pcs. per ctn.
• Hanger is Made from 3/16" x 1" Bar Stock and Come with a 1/16" x 1' Crossbar Used for Added Strength.
• 7" & 8" Galvanized Steel and Paintgrip are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks.
Metal:
Copper
Price
Code
Galvanized Steel
Price
Code
Price
Paintgrip
GUTTER ACCESSORIES
Size
Code
Code
7"
HRFMF7
HRFCP7
HRFGL7
HRFPG7
8"
HRFMF8
HRFCP8
HRFGL8
HRFPG8
Price
Hidden Hanger for Reverse Bead Gutter Only (Gutter Not Sold at Berger)
100 pcs. per ctn.
• Painted Aluminum Available in White Only.
Metal:
Painted Aluminum
Size
Code
6"
HIDHA6
Price
Copper
Code
Price
HIDHC6
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 35
1/07
HALF ROUND HANGERS
Rival Strap Hanger - 50 pcs. per ctn.
• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).
Metal:
Aluminum
Copper
Price
Code
Galvanized Steel
Size
Code
Price
Code
4"
N/A
RIVCP4
RIVGL4
5"
RIV __ __5
RIVCP5
RIVGL5
6"
RIV__ __6
RIVCP6
RIVGL6
Price
Regal Bar Hanger - 50 pcs. per ctn.
•
•
•
•
Hanger Includes Rod & Nut Assembly.
Improved Version of Imperial Bar Hanger.
Hanger Requires Final Form to Bead by Installer.
Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..
Metal:
Price
Copper
Code
Galvanized Steel
Size
Code
Price
Code
5"
REGMF5
REGCP5
REGGL5
6"
REGMF6
REGCP6
REGGL6
7"
REGMF7
REGCP7
REGGL7
8"
REGMF8
REGCP8
REGGL8
Price
Regal Double Bead Bar Hanger - 50 pcs. per ctn.
•
•
•
•
Hanger Includes Rod & Nut Assembly.
Improved Version of Double Bead Hanger.
Hanger Requires Final Form to Bead by Installer.
7" & 8" Mill Finished Aluminum Hangers are Considered a Special Order and may Require Extended Lead Time of at Least 2
Weeks. Special Orders are Not Subject to Cancellation or Return.
Price
Copper
Code
Galvanized Steel
Size
Code
Price
Code
5"
REGDM5
REGDC5
REGDG5
6"
REGDM6
REGDC6
REGDG6
7"
REGDM7
REGDC7
REGDG7
8"
REGDM8
REGDC8
REGDG8
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Metal:
Page 36
1/07
HALF ROUND HANGERS
Regal Single Bead Flange Gutter Roof Strap Hanger - 50 pcs. per ctn.
• Crossbar Nail Type Hanger.
Metal:
Copper
Galvanized Steel
Size
Code
Price
Code
5"
REGFC5
REGFG5
6"
REGFC6
REGFG6
Price
Rod & Nuts for Regal Bar Hanger - 100 pcs. per ctn.
• Brass is used with Copper Hanger.
Metal:
Size
Code
One Size
RODNUT
Price
Brass
Code
Galvanized
Price
RNBRAS
Code
Price
SRDNUT
Spring Clip for Gem Circle / #10 Combination Hanger - 50 pcs. per bag
• Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BA).
Metal:
Size
Painted Aluminum
Code
Price
One Size SPCL__ __
Brass
Code
Galvanized Steel
Price
SPCLBR
Code
Price
SPCLGL
Nut & Bolt for Shanks - 50 pcs. per ctn.
• #10 - 24 Thread x 3/4" Long.
Metal:
Brass
Size
Code
One Size
BN-CP
Galvanized Steel
Price
Code
Price
BN-S
GUTTER ACCESSORIES
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
“K” STYLE & HALF ROUND
SHANKS
Page 37
1/07
#10 Shank Plate for Fascia - 50 pcs. per ctn.
• Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).
Aluminum
Code
Copper
Price
SH__ __-1
Code
Galvanized Steel
Price
SHCP-1
Code
Price
SHCS-1
#6 Shank for Ogee or Crown Molding - 50 pcs. per ctn.
• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS).
Copper
Code
Galvanized Steel
Price
SHCP-6
Code
Price
SHCS-6
Code
Price
SH__ __-6
#8 Shank for Cornice - 50 pcs. per ctn.
Malleable Iron
Code
Price
SH-CM8
#10 Shank for Fascia - 50 pcs. per ctn.
• Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).
• Painted Galvanized Steel Available in White Only.
Code
Price
SH__ __10
Copper
Code
Galvanized Steel
Price
SHCP10
Code
Price
SHCS10
Code
SHWS10
#11 Shank for Nailing to Exposed Rafter - 50 pcs. per ctn.
Painted Aluminum
Code
SH__ __11
Price
Copper
Code
SHCP11
Galvanized Steel
Price
Code
Price
Price
SHCS11
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Painted Aluminum
SHANKS
Page 38
1/07
#12 Shank for Nailing to Sheeting - 1/3 Pitch - 50 pcs. per ctn.
• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS).
Aluminum
Code
Copper
Price
SH__ __12
Code
Galvanized Steel
Price
SHCP12
Code
Price
SHCS12
Code
SH__ __12
#25 Shank for Nailing to Sheeting - 1/2 Pitch - 50 pcs. per ctn.
Copper
Code
Galvanized Steel
Price
SHCP25
Code
Price
SHCS25
#30 Shank for Adjustable Pitch Rafters & Fascia - 50 pcs. per ctn.
Painted Aluminum
Code
Price
SH__ __30
Copper
Code
Galvanized Steel
Price
Code
SHCP30
Price
SHCS30
Shank Extension - 50 pcs. per ctn.
• Aluminum Available in High Gloss White (HG) and Royal Brown (BA).
Painted Aluminum
Code
SH__ __EX
Price
Copper
Code
SHCPEX
Galvanized Steel
Price
Code
Price
SHCSEX
GUTTER ACCESSORIES
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 39
1/07
END CAPS
K-Style End Cap - LEFT and RIGHT - 50 pcs. per ctn.
Left
•
•
•
•
5" Aluminum Available in High Gloss White (HG), Satin White (SW), Royal Brown (BR), Clay (CL) and Mill Finished (MF).
6" Aluminum Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).
7" & 8" Aluminum Available in High Gloss White (HG) and Dark Bronze (DB) .
Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).
Right
Metal:
Size
Aluminum
Code
Copper (16 Oz.)
Price
Code
Price
Galvanized Steel (26 Ga.)
Code
Price
Painted Gal. Steel
Code
Price
Paintgrip (26 Ga.)
Code
Price
LEFT
4"
N/A
ENLCP4
ENL264
N/A
N/A
5"
ENL__ __5
ENLCP5
ENL265
ENL__ __5
ENL6G5
6"
ENL__ __6
ENLCP6
ENL266
ENL__ __6
ENL6G6
7"
ENL__ __7
ENLCP7
ENL267
ENL__ __7
ENL6G7
8"
ENL__ __8
ENLCP8
ENL268
ENL__ __8
ENL6G8
4"
N/A
ENRCP4
ENR264
N/A
N/A
5"
ENR__ __5
ENRCP5
ENR265
ENR__ __5
ENR6G5
6"
ENR__ __6
ENRCP6
ENR266
ENR__ __6
ENR6G6
7"
ENR__ __7
ENRCP7
ENR267
ENR__ __7
ENR6G7
8"
ENR__ __8
ENRCP8
ENR268
ENR__ __8
ENR6G8
RIGHT
Half Round End Cap “C” Style - 50 pcs. per ctn.
Aluminum
Copper (16 Oz.)
Price
Code
Price
Code
Price
Paintgrip (26 gauge)
Size
Code
Code
4"
N/A
CENCP4
CEN264
N/A
5"
CEN__ __5
CENCP5
CEN265
CEN6G5
6"
CEN__ __6
CENCP6
CEN266
CEN6G6
7"
CEN__ __7
CENCP7
CEN267
CEN6G7
8"
CEN__ __8
CENCP8
CEN268
CEN6G6
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Metal:
Page 40
1/07
“K” STYLE MITERS
K-Style 90 Degree Box Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.
Inside
Outside
Metal:
Size
• 5" & 6" Painted Aluminum Available in High Gloss White (SG), Royal Brown (SB), Clay (CL), Satin White (SW) and
Dark Bronze (DB) - 6" Only.
• 7" & 8" Painted Aluminum Available in High Gloss White (32) and Royal Brown (BR).
• 5" & 6" Painted Galvanized Steel Available in White Only.
• 7" & 8" Painted Aluminum and Copper Miters will have Break Lines.
Painted Aluminum
Code
Copper (16 Oz.)
Price
Code
Price
Code
Price
Painted Gal. Steel
Code
Price
Paintgrip (26 Ga.)
Code
Price
INSIDE
4"
N/A
KISCP4
KIS264
N/A
N/A
5"
KIS__ __5
KISCP5
KIS265
KISWS5
KIS6G5
6"
KIS__ __6
KISCP6
KIS266
KISWS6
KIS6G6
7"
KIS__ __7
KISCP7
KIS267
N/A
N/A
8"
KIS__ __8
KISCP8
KIS268
N/A
N/A
4"
N/A
KOSCP4
KOS264
N/A
N/A
5"
KOS__ __5
KOSCP5
KOS265
KOSWS5
KOS6G5
6"
KOS__ __6
KOSCP6
KOS266
K0SWS6
KOS6G6
7"
KOS__ __7
KOSCP7
KOS267
N/A
N/A
8"
KOS__ __8
KOSCP8
KOS268
N/A
N/A
OUTSIDE
K-Style 90 Degree Strip Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.
• 5" & 6" Painted Aluminum Available in High Gloss White (HG), Satin White (LG) and Royal Brown (BA).
Metal:
Inside
Painted Aluminum
Size
Code
Price
GUTTER ACCESSORIES
INSIDE
5"
SMI__ __5
6"
SMI__ __6
OUTSIDE
Outside
5"
SMO__ __5
6"
SMO__ __6
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 41
1/07
HALF ROUND MITERS
Inside
Half Round 90 Degree Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.
• 5" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).
• 6", 7" & 8" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).
Outside
Metal:
Size
Aluminum
Code
Copper (16 Oz.)
Price
Code
Price
Galv. Steel (26 Ga.)
Code
Price
Paintgrip (26 Ga.)
Code
Price
INSIDE
4"
N/A
LISCP4
LIS264
N/A
5"
LIS__ __5
LISCP5
LIS265
LIS6G5
6"
LIS__ __6
LISCP6
LIS266
LIS6G6
7"
LIS__ __7
LISCP7
LIS267
N/A
8"
LIS__ __8
LISCP8
LIS268
N/A
4"
N/A
LOSCP4
LOS264
N/A
5"
LOS__ __5
LOSCP5
LOS265
LOS6G5
6"
LOS__ __6
LOSCP6
LOS266
LOS6G6
7"
LOS__ __7
LOSCP7
LOS267
N/A
8"
LOS__ __8
LOSCP8
LOS268
N/A
GUTTER ACCESSORIES
OUTSIDE
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
END PIECES / SLIP JOINTS
K-Style End Piece - 5" x 3" - 20 pcs. per ctn.
• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).
• 5" x 3" Painted Galvanized Steel is Available in White Only.
Metal:
Size
Painted Aluminum
Code
Price
5" x 3" KEP__ __5
Copper (16 oz)
Code
Price
KEPCP5
Galvanized Steel (26 gauge)
Code
Painted Gal. Steel
Price
KEP265
Code
Price
KEPWS5
Half Round End Pieces - 20 pcs. per ctn.
• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).
Metal:
Painted Aluminum
Size
Code
4" x 3"
N/A
Price
5" x 3" DEP__ __5
6" x 4"
N/A
Copper (16 oz)
Code
Price
Code
N/A
DE2643
DECP53
DE2653
N/A
DE2664
Price
K-Style Slip Joint - 50 pcs. per ctn.
• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).
• 5" Painted Galvanized Steel Available in White Only.
• KSJ265 Available in 30 pieces per carton.
Metal:
Painted Aluminum
Price
Copper (16
Code
oz)
Price
Code
Painted Gal. Steel
Size
Code
Price
Code
4"
N/A
N/A
KSJ264
N/A
5"
KSJ__ __5
KSJCP5
KSJ265
KSJWS5
Price
Half Round Slip Joint - 50 pcs. per ctn.
GUTTER ACCESSORIES
• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).
Metal:
Painted Aluminum
Price
Copper (16
Code
oz)
Price
Size
Code
Code
4"
N/A
SCNCP4
SCN264
5"
SCN__ __5
SCNCP5
SCN265
6"
SCN__ __6
SCNCP6
SCN266
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 42
1/07
OUTLETS
Page 43
1/07
K-Style Square Outlet with “Lock-In” Design - 50 pcs. per ctn.
• Mill Finished Aluminum Square Outlets are Pop Rivet Style.
• Painted Aluminum is Available in White Only.
Metal:
Price
Painted Aluminum
Code
Price
Copper (16 Oz.)
Code
Size
Code
Price
Code
2" x 3"
SKOMF3
SKOHG3
SKOCP3
SKO263
3" x 4"
SKOMF4
SKOHG4
SKOCP4
SKO264
4" x 5"
SKOMF5
N/A
SKOCP5
SKO265
Price
U. S. Patent 4,619,544
K-Style Oval Outlet with “Lock-In” Design - 50 pcs. per ctn.
Metal:
U. S. Patent 4,619,544
Price
Copper (16 Oz.)
Code
Size
Code
Price
3"
OKOMF3
OKOCP3
OKO263
4"
OKOMF4
OKOCP4
OKO264
K-Style Wide Flange Pop Rivet Oval Outlet - 50 pcs. per ctn.
• 3" Aluminum is Available in Mill Finished Only.
• 4" Aluminum is Available in White Only.
• 3" & 4" Painted Galvanized Steel are Available in White Only.
Metal:
Aluminum
Copper (16 Oz.)
Price
Code
Price
Code
Price
Size
Code
Code
3"
WKOMF3
WKOCP3
WKOGS3
WKOWS3
4"
WKOWA4
N/A
WKOGS4
WKOWS4
Price
• 3" & 4" Aluminum is Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).
• 5" & 6" Aluminum is Available in Mill Finished Only.
3” & 4”
5” & 6”
Metal:
Aluminum
Copper (16 Oz.)
Price
Code
Price
Size
Code
Code
3"
RBO__ __3
RBOCP3
RBO263
4"
RBO__ __4
RBOCP4
RBO264
5"
RBOMF5
RBOCP5
RBO265
6"
RBOMF6
RBOCP6
RBO266
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Half Round B Style Outlet - 50 pcs. per ctn.
OUTLETS
Half Round Wide Flange B Style Outlet - 50 pcs. per ctn.
• 3" & 4" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).
Metal:
Painted Aluminum
Size
Code
3"
WBO__ __3
4"
WBO__ __4
Price
Half Round WB Pop Rivet Style Outlet - 50 pcs. per ctn.
• 3" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).
Metal:
Painted Aluminum
Size
Code
3"
WBP__ __3
Price
Copper (16 Oz.)
Code
WBPCP3
Price
Code
Price
WBP263
GUTTER ACCESSORIES
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 44
1/07
QUALITY
ALITY RDP, EDGINGS & COIL
Page 45
1/07
AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE PAGE 48)
Add Beauty by Coordinating Colors on Your Building Exterior
Includes Drip Edge, Soffit, Fascia, J-Channel, Trim Coil and Gutter Coil
A5 Drip Edge
B4 1/2 Roof Edge
A5
2"
2 1/2"
3"
1"
BS4 1/2 Roof Edge
B4 1/2
1 1/2"
BS4 1/2
2"
1"
MATERIALS:
• .019 Painted Aluminum
• .016 Painted Galvanized Steel
CS4 Drip Edge
1/2"
1/2"
MATERIALS:
MATERIALS:
C4 1/2 Drip Edge
C6 Drip Edge
3"
3"
3"
3"
C4 1/2
1 1/2"
C6
CS4
2"
1/4"
1/4"
MATERIALS:
MATERIALS:
3/8"
MATERIALS:
• 24 Gauge Steel Kynar–
Black, Bronze, Brown & White
Page 46
1/07
QUALITY
F4 1/2 Open Drip Edge
FSN4 1/2 Drip Edge
F5 Open Drip Edge
3"
2 9/16"
5/16"
11/16"
2 7/8"
1" 3/8"
3/16"
F4 1/2 Open
1/4"
MATERIALS:
F5M Drip Edge
FSN4 1/2
MATERIALS:
5/16"
3/4"
11/16"
F5 Open
1/4"
MATERIALS:
H5 1/2 Slag Stop
2 5/8"
11/16"
1/2"
F5M
1 1/2"
2"
3 1/4"
3/16"
MATERIALS:
• .016 & .010 Painted Galvanized Steel
• 16 Oz. Copper
H6F Slag Stop
2 3/8"
5/16"
3/4"
11/16"
H5 1/2
F5 1/2 Open
1/4"
5/16"
MATERIALS:
MATERIALS:
H7 Slag Stop
ODE Overhanging Drip Edge
3/4"
7/8"
1 1/2"
3"
2 1/2"
4"
3/8"
3 1/8"
H6F
ODE
2"
H7
1/4"
1/8"
5/16"
MATERIALS:
ODLR Drip Edge
MATERIALS:
3/8"
"W" Valley
MATERIALS:
"V" Valley
2 5/8"
18" Girth
With Cleat Hem
1/2"
1 3/4"
ODLR
1/4"
3/16"
MATERIALS:
18", 20" or 24" Girth
With Cleat Hem
W
1" 1"
MATERIALS:
• Mill Finished Aluminum
V
MATERIALS:
• Galvanized Steel
• Copper
QUALITY
Page 47
1/07
Step Flashing
Flashing Rolls
Diamond Bands
MATERIALS:
• Black, Brown, White &
Terratone Painted Aluminum
• Copper
MATERIALS:
• Aluminum
• Galvanized Steel
Trim Coil
Gutter Coil
Mini Gutter Coil
MATERIALS:
• 24" x 50'
MATERIALS:
• Painted Aluminum
• .027 x 11 3/4"
• .032 x 11 7/8"
• .032 x 15"
MATERIALS:
• .027 x 11 3/4"
• .032 x 11 7/8"
• Copper
12" Traplok Aluminum Soffit
6" Aluminum Fascia
1/2 Aluminum "F" Channel
MATERIALS:
1 1/8"
6"
7/16"
6"
1 1/8"
7/16"
6"
3 1/8"
Ventilated
Width
1 3/4"
1 1/8"
3 1/8"
Ventilated
Width
6"
1/2"
6"
1/2"
1"
MATERIALS:
MATERIALS:
MATERIALS:
1/2 Aluminum "J" Channel
5" & 6" K Style Gutter
2 x 3 and 3 x 4 Downspouts
MATERIALS:
• 10' - 20' Lengths
MATERIALS:
1 1/2"
3/4"
1/2"
MATERIALS:
QUALITY
Page 48
1/07
AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE BELOW)
End Caps
Miters
Touch-Up Paint
Available 2 x 3 and 3 x 4
in A Style and B Style
Available Left and Right
Available Inside and Outside
Available in 12 Oz. Cans
MATERIALS:
MATERIALS:
MATERIALS:
TOUCH-UP PAINT
Elbows
AVAILABLE IN THESE POPULAR COLORS!
White - 30
White - 80
Bone Linen
Herringbone
Almond
Cream
Ivory
Prairie Sand
Clay
Wicker
Buckskin Brown
Beaver Brown
Terra-Bronze
Dark Bronze
Musket Brown
Royal Brown
Black
Tuxedo Gray
CB Gray
Pearl Gray
Grecian Green
Red
Due to printing limitations, colors shown here are not exact to actual colors. Please contact Berger for an actual color sample.
Some colors may be considered a special order.
Page 49
1/07
CONDUCTOR HEADS
#14 Conductor Head with Oval Outlet 3", 4" & 5" - 6 pcs. per ctn.
Metal:
3" & 4" Conductor Heads
Copper
6" - 4 pcs. per ctn.
Galvanized Steel
Price
Code
Paintgrip
Size
Code
Price
3"
CHOCP3
CHOGL3
CHFPG3
4"
CHOCP4
CHOGL4
CHFPG4
5"
CHOCP5
CHOGL5
N/A
6"
CHOCP6
CHOGL6
N/A
5" & 6" Conductor Heads
NOTE: Small spot welds may be visible on Galvanized Steel Conductor Heads Only.
Plain Conductor Head with Oval Outlet* - 3" - 6 pcs. per ctn.
• 3" and 4" Aluminum Available in High Gloss
White (HG) and Royal Brown (BR).
• 5" Aluminum Available in High Gloss White
Only.
Metal:
3" Plain Conductor Head
*5” Plain Conductor Head has a Square Outlet.
Painted Aluminum
Size
Code
3"
CHO__ __3
4"
CHO__ __4
5"
CHOHG5
Price
Molded Universal Conductor Head
• Available in White Only.
• Suited for Any Outlet Shape or Size.
Polypropylene "Plastic"
Code
Price
GUTTER ACCESSORIES
CHFMUW
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
EAVE BOXES / FUNNELS /
DIVERTERS
Regular (Open), Closed and Sloped Eave Boxes Regular & Closed - 12 pcs. per ctn.
Sloped - 6 pcs. per ctn.
• All Painted Aluminum Available in High Gloss White Only.
Metal:
Size
Painted Aluminum
Code
Price
Copper
Code
Price
REGULAR (OPEN)
3" x 12"
EBWA32
EBCP32
3" x 16"
EBWA36
EBCP36
4" x 12"
EBWA42
EBCP42
3" x 16"
CBWA36
CBCP36
4" x 16"
CBWA46
CBCP46
3" x 16"
SBWA36
SBCP36
4" x 16"
SBWA46
SBCP46
CLOSED
SLOPED
Oval Funnel - 12 pcs. per ctn.
• Painted Aluminum is Available in White (WA) and Royal Brown (BR).
Metal:
Painted Aluminum
Price
Copper
Code
Galvanized Steel
Size
Code
Price
Code
3"
FUN__ __3
FUNCP3
FUNGL3
4"
FUN__ __4
N/A
FUNGL4
Price
Square "Y" Funnel - 12 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White (HG), Low Gloss White (LG) and Royal Brown (BR).
GUTTER ACCESSORIES
Metal:
Painted Aluminum
Size
Code
2" x 3"
SCY__ __3
3" x 4"
SCY__ __4
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 50
1/07
DIVERTERS /
DOWNSPOUT TUBES
Page 51
1/07
Square Cutoff with Diverter - 12 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White (WA), Low Gloss White (LG) and Royal Brown (BA).
Metal:
Painted Aluminum
Size
Code
2" x 3"
SAC__ __3
3" x 4"
SAC__ __4
Price
Round Corrugated Cutoff with Diverter - 12 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White Only.
Metal:
Painted Aluminum
Size
Code
3" RC
RCCWA3
Price
Downspout Tube - 12 pcs. per ctn.
Metal:
Painted Aluminum
Code
Galvanized Steel
Size
Code
Price
Code
2"
DSTWA2
DSTCP2
DSTGL2
3"
DSTWA3
DSTCP3
DSTGL3
4"
DSTWA4
DSTCP4
DSTGL4
Price
GUTTER ACCESSORIES
Price
Copper
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
PIPE FASTENERS
Page 52
1/07
Brick Hook - ROUND and SQUARE - 50 pcs. per ctn.
• Painted Galvanized is Available in White Only.
Metal:
Size
Galvanized Steel
Code
Price
Code
Price
ROUND
3"
BPRGL3
BPRWS3
4"
BPRGL4
BPRWS4
2" x 3"
BPSGL3
BPSWS3
3" x 4"
BPSGL4
BPSWS4
SQUARE
Stamped Sickle Hook for Wood - ROUND and SQUARE - 50 pcs. per ctn.
Metal:
Size
Galvanized Steel
Code
Painted Galv. - White
Price
Code
Price
Painted Galv. - Royal Brown
Code
Price
ROUND
3"
PWHGL3
PWHWS3
PBRSH3
4"
PWHGL4
PWHWS4
PBRSH4
2" x 3"
SSWGL3
SSWWS3
SHBRA3
3" x 4"
SSWGL4
SSWWS4
SHBRA4
SQUARE
Plain Round and Round Corrugated Hinged Downspout Hook 3" & 4" - 50 pcs./ctn.
5" - 25 pcs./ctn.
• Non-Stock Item. Please Allow Extended Lead Time.
• Copper Plated Zinc Alloy.
• Must be Purchased in Full Box Quantities.
Metal:
Size
Coppered
Code
Price
PLAIN ROUND
GUTTER ACCESSORIES
3"
HHPRC3
4"
HHPRC4
5"
HHPRC5
ROUND CORRUGATED
3"
HHRCC3
4"
HHRCC4
5"
HHRCC5
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
PIPE FASTENERS
Page 53
1/07
Plain Round Cast Bronze Sickle Hook - 25 pcs per ctn.
Metal:
Bronze
Size
Code
Price
4"
PWHBZ4
6"
PWHBZ6
2" x 3" and 3" x 4" Square Side-Fasten Hook - 50 pcs. per ctn.
• Copper Plated Zinc Alloy.
Metal:
Coppered
Size
Code
Price
2" x 3"
SFHC23
3" x 4"
SFHC34
Square Wired Wood/Brick Hook - 2" x 3" and 3" x 4" - 50 pcs. per ctn.
4" x 5" - 25 pcs. per ctn.
Metal:
Bronze
Size
Code
Price
2" x 3"
WFHC23
3" x 4"
WFHC34
4" x 5"
WFHC45
Rack & Key - 50 pcs. per ctn.
• Aluminum is Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF).
• Two Racks are Recommended per 10 ft. Downspout Section.
Metal:
Size
Aluminum
Code
Copper
Price
One Size RAK__ __ __
Code
Galvanized Steel
Price
RAK-CP
Code
Price
RAK-CS
Key - 50 pcs. per ctn.
Metal:
Size
Code
One Size
KEY-MF
Price
Bronze (Used w/ Copper)
Code
Price
KEY-BR
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
PIPE FASTENERS
Page 54
1/07
#0 Masonry Drive - 50 pcs. per ctn.
• Requires Rack & Key to Install.
• Two Drives are Recommended per 10 ft. Downspout Section.
Bronze
Code
Galvanized Steel
Price
Code
DR-BR0
Price
DRCS-0
#4 Wood Drive - 50 pcs. per ctn.
Copper
Code
Galvanized Steel
Price
Code
DRCP-4
Price
DRCS-4
#5 Wood Drive - 50 pcs. per ctn.
Malleable Iron
Code
Price
DR-CM5
#6 Drive - 50 pcs. per ctn.
•
•
•
•
Aluminum Available in High Gloss White (WA-), Royal Brown (BRA) and Mill Finished (MF-).
Painted Galvanized Steel Available in White Only.
Requires Rack & Key to Install.
Two Drives are Recommended per 10 ft. Downspout Section.
Aluminum
Code
Copper
Price
Code
DR__ __ __6
Galvanized Steel
Price
DRCP-6
Code
DRCS-6
Price
Code
DRWS-6
GUTTER ACCESSORIES
U-Bracket - 50 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White Only.
• Two Brackets are Recommended per 10 ft. Downspout Section.
Metal:
Painted Aluminum
Size
Code
2" x 3"
UBR-WA
Price
Copper
Code
Price
UBR-CP
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
PIPE FASTENERS
Page 55
1/07
Conductor Bracket - 50 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).
• Two Brackets are Recommended per 10 ft. Downspout Section.
Metal:
Painted Aluminum
Size
Code
2" x 3"
CB__ __-3
Copper
Price
Code
Price
CBCP-3
#31 Pipe Cleat - 50 pcs. per ctn.
• Painted Aluminum is Available in High Gloss White (HG) and Brown (BR).
• Two Pipe Cleats are Recommended per 10 ft. Downspout Section.
Painted Aluminum
Code
Copper
Price
Code
PC__ __31
Price
PCCP31
Universal Conductor Band - 50 pcs. per ctn.
• Aluminum is Available in High Gloss White (WA), Low Gloss White (LG), Royal Brown (BA), Dark Bronze (DB) and
Mill Finished (MF).
• Painted Galvanized Steel is Available in White (WS) and Brown (BS).
• Two Conductor Bands are Recommended per 10 ft. Downspout Section.
Aluminum
Code
Copper
Price
Code
__ __12CB
Galvanized Steel
Price
CP12CB
Code
Price
GA12CB
Code
Price
__ __12CB
Metco Ornamental Conductor Bands - 100 pcs. per ctn.
Metal:
Painted Aluminum
Price
Copper
Code
Galvanized Steel
Size
Code
Price
Code
3"
MET__ __3
METCP3
METGA3
4"
MET__ __4
METCP4
METGA4
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
• Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Dark Bronze (DB).
• Two Conductor Bands are Recommended per 10 ft. Downspout Section.
MISCELLANEOUS ACCESSORIES
Wire Strainers - ROUND - 2", 3" & 4" - 50 pcs./ctn.
Page 56
1/07
5" & 6" - 20 pcs./ctn.
• Round Strainers can be used in Square Holes when Reformed by Hand.
Metal:
Copper
Price
Code
Galvanized Steel
Size
Code
Price
Code
2"
RWSMF2
RWSCP2
RWSGL2
3"
RWSMF3
RWSCP3
RWSGL3
4"
RWSMF4
RWSCP4
RWSGL4
5"
RWSMF5
RWSCP5
RWSGL5
6"
RWSMF6
RWSCP6
RWSGL6
#42 Pop Rivet 1 1/2" - Aluminum 1,000 pcs./ctn.
Price
Stainless Steel 100 pcs./ctn.
Copper & Galvanized Steel 500 pcs./ctn.
• Painted Aluminum Available in White (BW) and Royal Brown (BB).
Painted Aluminum
Code
Copper
Price
Code
A42A__ __
Galvanized Steel
Price
A42CPB
Code
Price
A42GLB
#44 Pop Rivet 1 5/8" - Aluminum 1,000 pcs./ctn.
Stainless Steel
Code
A42SSB
Copper 500 pcs./ctn.
• Painted Aluminum Available in White (BW), Royal Brown (BB) and Dark Bronze (DB).
Painted Aluminum
Code
Copper
Price
Code
A44A__ __
Price
A44CPB
Gutter Wedge - 100 pcs. per ctn.
• Painted Aluminum Available in White Only.
Metal:
Painted Aluminum
GUTTER ACCESSORIES
Size
Code
One Size
GW-WA
Price
Trim Nails - 1 lb. box
• Aluminum Available in White Only.
Metal:
Painted Aluminum
Size
Code
1"
100WAW
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
MISCELLANEOUS ACCESSORIES
Trim Nails 1 1/4" - Aluminum - 1 lb. box
Page 57
1/07
Copper - 1/4 lb. box
• Aluminum Available in White (WAW) and Brown (BAW).
Metal:
Painted Aluminum
Size
Code
Price
1 1/4"
114__ __ __
Copper
Code
Price
114CCP
Gutter Mastic 5 oz. Tubes - 24 pcs. per ctn.
• Available in White (WA) and Mill Finished (MF).
Code
Price
MAS__ __8
SeamerMate® 10 oz. Tubes - 12 pcs. per ctn.
• Available in Gray Only.
Code
Price
SMMTGR
Touch-Up Paint 12 oz. Cans - 12 pcs. per ctn.
• Available in High Gloss White (WHG), Satin White (SWP), White Steel (WSP), Royal Brown (BRP), Dark Bronze (DBP)
and Ivory (IVY).
Code
Price
TUP__ __ __
No-Caulk Pipe Flashing - 12 pcs. per ctn.
Size
Code
1 1/2"
OMFN15
2"
OMFN20
3"
OMFN30
4"
OMFN40
Price
Ladder-Max Universal Ladder Stabilizer - 1 pc. per ctn.
•
•
•
•
The galvanized steel Ladder-Max Ladder Stand-Off Stabilizer Helps Improve Efficiency and Facilitates Ladder Productivity
Size: 20-3/4"h x 38-1/2"w, Weight: 7 lbs. 11 oz.
Stand-Off Depth is 19"
OSHA and ANSI Certified and Easily Attaches and Detaches without Tools to Most Ladder Styles
Code
Price
LADMAX
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
Metal:
GUTTER GUARDS
Page 58
1/07
K-Style Gutter Shingle - 20 pcs. per ctn. - 3' long ea.
• Can be Used with 5"K or 6"K Gutter.
• Powder Coated Steel Weatherwood can be Used with Steel or Aluminum.
Metal:
Copper
Size
Code
5" - 6" K
GGSKCP
Steel Weatherwood
Price
Code
Price
GGSKPC
K-Style Drop-In Gutter Guard - Aluminum 50 pcs. per ctn.
Copper 25 pcs. per ctn.- 3' long ea.
Metal:
Price
Copper
Code
Galvanized
Size
Code
Price
Code
5"K
GG5KDI
GG5KCDI
GG5KGDI
6"K
GG6KDI
GG6KCDI
GG6KGDI
Price
K-Style Hinged Gutter Guard - Aluminum & Galv. Steel 75 pcs. per ctn. Painted Galv. Steel 50 pcs. per ctn. - Copper 25 pcs. per ctn. - 3' long ea.
• Painted Galvanized Steel can be Used with 5"K or 6"K Gutter.
• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K).
Metal:
Price
Copper
Code
Galvanized Steel
Price
Code
Size
Code
Price
Code
5"K
GGAK-5
GGCK-5
GGGLK5
GGPC__6
6"K
GGAK-6
GGCK-6
GGGLK6
GGPC__6
7"K
N/A
N/A
GGGLK7
N/A
K-Style Lock-On Gutter Guard - 25 pcs. per ctn. - 4' long ea.
• Painted Galvanized Steel is Available in Black Only.
Metal:
GUTTER ACCESSORIES
Size
Code
5" K
GG5KKDI
6"K
GG6KKDI
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
GUTTER GUARDS
Page 59
1/07
K-Style NoLeaf™ Gutter Cover - 25 pcs. per ctn. - 4' long ea.
• Installs on New or Existing K-Style Gutter Systems.
• Stock Colors are Available in Almond (AL), Clay (CL), Cream (CR), Linen (LI), Royal Brown (RB), and White (WH).
• Special Order Colors are Available in Beaver Brown (BB), Black (BL), Buckskin Brown (BU), Terra Bronze (BZ), CB Grey (CBG),
Bronze (FBZ), Grecian Green (GG), Herringbone (HE), Ivory (IV), Musket Brown (MB), Pearl Gray (PG), Tuxedo Grey (TG) and
Wicker (WI).
• Special Order Colors may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not Subject to Cancellation or
Return.
Metal:
Size
.024 Gauge Aluminum
Code
Price
One Size MNL__ __ __
NoLeaf™ Gutter Guard Bracket - 50 pcs. per ctn.
• Use 2 Brackets per 4' Piece
• PVC is Available in White (W) and Clay (C).
Metal:
Size
Code
One Size
MNLB
Price
K-Style Solid Snap-In Plastic Gutter Cover - 25 pcs. per ctn. - 4' long ea.
• PVC is Available in White (W) and Clay (C).
Metal:
Size
PVC
Code
Price
5" - 6" K SPGC6K__4
• PVC is Available in White (W), Brown (B) and Black (K).
Metal:
PVC
Size
Code
5" - 6" K
PVCSI6__
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
GUTTER ACCESSORIES
K-Style Diamond Shaped Snap-In Plastic Gutter Cover with Mesh Backing
- 50 pcs. per ctn. - 3' long ea.
GUTTER GUARDS
Half Round Hinged Gutter Guard - Aluminum 50 pcs. per ctn. Copper 25 pcs. per ctn. - 3' long ea.
Metal:
Copper
Size
Code
Price
Code
5" HR
GGAR-5
GGCR-5
6" HR
GGAR-6
GGCR-6
Price
Splash Blocks
Green
Code
Brown
Price
SBGN06
Code
Gray
Price
SBBR07
Code
Price
SBGR34
Flex-A-Spout - 12 pcs. per ctn.
• Available in Brown (BR), Green (GR) and White (WH).
• Sold in Full Box Quantities Only.
Brown
Code
FLXSBR
Green
Price
Code
FLXSGR
White
Price
Code
Price
FLXSWH
GUTTER ACCESSORIES
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 60
1/07
Page 61
1/07
Step Flashing
Size/Description
Metal/Color
Pcs. Per Box
Code
2.5" x 2.5" x 7" Pre-Bent
Brown Aluminum
500
SFB227
2" x 3" x 7" Pre-Bent
Brown Aluminum
500
SFB237
Brown Aluminum
500
SFB338
Brown Aluminum
500
SFB347
Brown Aluminum
500
SFB358
Brown Aluminum
250
SFB557
Brown Aluminum
250
SFB558
.019 Brown Aluminum
250
SF9B358
.019 Brown Aluminum
250
SF9B352
2.5" x 2.5" x 7" Pre-Bent
Black Aluminum
500
SFK227
Black Aluminum
500
SFK237
Black Aluminum
500
SFK338
Black Aluminum
500
SFK347
Black Aluminum
250
SFK557
Black Aluminum
250
SFK558
Black Aluminum
250
SFK662
.019 Black Aluminum
250
SF9K358
.019 Black Aluminum
250
SF9K352
2.5" x 2.5" x 7" Pre-Bent
500
SFM227
500
SFM237
500
SFM338
500
SFM347
250
SFM448
250
SFM557
250
SFM558
250
SFM662
5" x 7" Flat
500
STFLMF
6" x 8" Flat
500
STMF68
7" x 10" Flat
Mill Finshed Aluminum
500
SFM710
8" x 10" Flat
500
SFM810
5" x 7" Flat
Black/Brown Aluminum
500
STFLBB
6" x 8" Flat
Black/Brown Aluminum
500
STBB68
2.5" x 2.5" x 7" Pre-Bent
16 Oz. Copper
100
SFC227
16 Oz. Copper
100
SFC237
16 Oz. Copper
50
SFC558
5" x 7" Flat
16 Oz. Copper
100
STFLCP
30 Ga. Galv. Steel
100
SFG237
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
ROOF EDGING AND TRIM
STEP FLASHING
Page 62
1/07
A5 Drip Edge
• .0125 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).
A5
Aluminum - 500'/ctn.
Gauge
Code
.0125
A-5__ __2
Price
B4 1/2 Roof Edge
• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).
B4 1/2
Painted Aluminum - 500'/ctn.
Gauge
Code
.019
B45__ __B
Price
BS4 1/2 Roof Edge
BS4 1/2
Gauge
Code
.019
BS45__ __
Price
C3 Drip Edge
• .0125 Aluminum is Available in White (WA) and Mill Finished (MF).
C3
Gauge
Code
.019
C-3__ __B
.0125
C-3__ __2
Price
CS4 Drip Edge
CS4
Gauge
Code
.019
CS4__ __B
.0125
CS4__ __2
Price
Copper - 200'/ctn.
Gauge
Code
16 oz.
CS4CPB
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 63
1/07
C3 1/2 Drip Edge
• .024 Aluminum is Available in White (W) and Royal Brown (B) and Requires a 2 Week Lead Time.
• .024 Aluminum is 250'/ctn.
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Ivory (IA).
• .016 Aluminum is Available in White (WA) and Royal Brown (BA).
• .0125 Aluminum is Available in White Only.
C3 1/2
Gauge
Code
.024
C35__24
.019
C35__ __B
.016
C35__ __6
.0125
C35WA2
Price
Copper - 200'/ctn.
Gauge
Code
16 oz.
C35CPB
Price
C4 Drip Edge
• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.
C4
Copper - 200'/ctn.
Gauge
Code
16 oz.
C-4CPBD
Galvanized Steel - 200'/ctn.
Price
Gauge
Code
26 ga. G90
C-4G90
Price
C4 1/2 Drip Edge
• .024 Aluminum is Available in White (W) and Requires a 2 Week Lead Time.
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Musket Brown (MB) and Mill Finished (MF).
• .0125 Aluminum is Available in White Only.
• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).
C4 1/2
Gauge
Code
.024
C45__24
.019
C45__ __B
.016
C45__ __6
.0125
C45WA2
Price
Copper - 200'/ctn.
Gauge
Code
16 oz.
C45CPB
Price
Gauge
Code
28 ga.
C45GLB
Price
Gauge
Code
26 ga.
C45__ __B
C5 Drip Edge
C5
Gauge
Code
.0215
C-5__ __2
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 64
1/07
C5 1/2 Drip Edge
• .032 Aluminum and .024 Aluminum are Available in White (W) and Royal Brown (B) and Require a 2 Week Lead Time.
• .032 Aluminum and .024 Aluminum are 250'/ctn.
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).
• .016 Aluminum and .0125 Aluminum are Available in White (WA) and Royal Brown (BA).
C5 1/2
Gauge
Code
.032
C55__3B
.024
C55__24
.019
C55__ __B
.016
C55__ __6
.0125
C55__ __2
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
C55CPB
Price
Gauge
Code
28 ga.
C55GLB
Price
Gauge
Code
26 ga.
C55__ __B
Price
C6 Drip Edge
•
•
•
•
C6
.032 Aluminum is Available in White (WB), Royal Brown (BA), Dark Bronze (DZ) and Mill Finished (MF).
26 Gauge Painted Galvanized Steel is Available in White (WS) and Bronze (BZ).
28 Gauge Galvanized Steel is 100'/ctn and 26 Gauge Galvanized Steel is 200'/ctn.
26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.
Gauge
Code
.032
C-63__ __
Price
Copper - 100'/ctn.
Gauge
Code
16 oz.
C-6CPB
Price
Galvanized Steel
Gauge
Code
28 ga.
C-6GLB
26 ga. G90
C-6G90
Price
Gauge
Code
26 ga.
C-6__ __B
C7 Drip Edge
• .032 Painted Aluminum is Available in White (WB), Royal Brown (BA) and Dark Bronze (DB).
C7
Gauge
Code
.032
C-73__ __
Price
C9 Drip Edge
• .032 Painted Aluminum is Available in White Only.
• Requires a 2 Week Lead Time.
C9
Gauge
Code
.032
C-93WA
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 65
1/07
D3 and D4 Rake Edge
D3
Gauge
Code
Price
D3
.019
D-3__ __B
D4
D4
.019
D-4__ __B
E3 Roofers Angle
E3
Gauge
Code
.019
E-3__ __B
.016
E-3WA6
Price
E4 Roofers Angle
• 28 Gauge Galvanized Steel is 250'/ctn and 26 Gauge Galvanized Steel is 200'/ctn
E4
Gauge
Code
.019
E-4__ __B
.016
E-4__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
E-4CPB
Price
Galvanized Steel
Gauge
Code
28 ga.
E-4GLB
Price
E6 Roofers Angle
• 26 Gauge Painted Galvanized Steel is Available in White Only.
E6
Gauge
Code
.019
E-6__ __B
.016
E-6__ __6
Price
Gauge
Code
28 ga.
E-6GLB
Price
Gauge
Code
26 ga.
E-6WSB
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 66
1/07
E8 Roofers Angle
E8
Gauge
Code
.019
E-8__ __B
Price
Gauge
Code
28 ga.
E-8GLB
Price
Gauge
Code
26 ga.
E-8WSB
Price
E9 Roofers Angle
E9
Copper - 200'/ctn.
Gauge
Code
16 oz.
E-9CPBD
Price
Gauge
Code
26 ga. G90
E-9G90
Price
F4 1/2 Drip Edge
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and
Mill Finished (MF).
• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (WA) and Royal Brown (BA).
• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K).
F4 1/2
Gauge
Code
.019
F45__ __B
.016
F45__ __6
.0125
F45__ __2
Price
Copper - 200'/ctn.
Gauge
Code
16 oz.
F45CPB
Price
Gauge
Code
30 ga.
F45GS3AX
Price
Gauge
Code
30 ga.
F45__S3AX
FSN4 1/2 High Tensile Drip Edge
• .014 Painted Aluminum is Available in White (W), Royal Brown (B) and Black (K).
• .0125 Painted Aluminum is Available in White (W) and Brown (B).
FSN 4 1/2
Gauge
Code
.014
FS45__4
.0125
FS45__2
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 67
1/07
F5 Drip Edge
• .024 Painted Aluminum is Available in White (W) and Brown (B).
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and
Mill Finished (MF).
F5
Gauge
Code
.024
F-5__24
.019
F-5__ __B
.016
F-5__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
F-5CPB
Price
Gauge
Code
28 ga.
F-5GLB
Price
Gauge
Code
26 ga.
F-5__ __B
Price
F5 Open Drip Edge
• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA) and Mill Finished (MF).
F5
Gauge
Code
.019
F5O__ __B
.016
F5O__ __6
.0125
F5O__ __2
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
F5OCPB
Price
F5M (Medium) Drip Edge
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Clay (CL), Musket Brown (MB), Ivory (IA) and Mill Finished (MF).
• .016 Painted Aluminum is Available in White (WA), Clay (CL) and Royal Brown (BA).
• .013 and .011 Painted Galvanized Steel are Available in White (W) and Brown (B).
F5M
Gauge
Code
.019
F5M__ __B
.016
F5M__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
F5MCPB
Price
Gauge
Code
28 ga.
F5MGLB
Price
Gauge
Code
.013
F5M__13
.011
F5M__11
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 68
1/07
• .019 Aluminum is Available in White (WB), Royal Brown (BB) and Mill Finished (MF).
• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (W) and Royal Brown (B).
F5 1/2
Gauge
Code
.019
F55O__ __
.016
F55O__6
.0125
F55O__2
Price
FR4 1/2 Drip Edge
• .019 Painted Aluminum and .016 Painted Aluminum are Available in White Only.
FR4 1/2
Gauge
Code
.019
FR45WB
.016
FR45W6
Price
FR5 Drip Edge
• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA) and Black (BK).
FR5
Gauge
Code
.019
FR5__ __B
.016
FR5__ __6
Price
Gauge
Code
28 ga.
FR5GLB
Price
F8 Drip Edge
• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA), Mill Finished (MF) and Black (BK).
F8
Gauge
Code
.024
F-8W24
.019
F-8__ __B
.0125
F-8__ __2
Price
Copper - 100'/ctn.
Gauge
Code
16 oz.
F-8CPB
Price
Gauge
Code
30 ga.
F-83GL
Price
Gauge
Code
30 ga.
F-83WS
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 69
1/07
H5 1/2 Slag Stop
• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).
H5 1/2
Gauge
Code
.019
H55__ __B
.016
H55__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
H55CPB
Price
Gauge
Code
28 ga.
H55GLB
Price
Gauge
Code
26 ga.
H55__ __B
Price
H6F Slag Stop
•
•
•
•
•
•
.032 Aluminum is Available in White (W), Royal Brown (B), Dark Bronze (D) and Mill Finished (M).
.032 Aluminum and .024 Aluminum are 250'/ctn.
.024 Painted Aluminum is Available in White Only.
.019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).
.016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).
26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).
H6F
Gauge
Code
.032
H6F__3B
.024
H6FW24
.019
H6F__ __B
.016
H6F__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
H6FCPB
Price
Gauge
Code
28 ga.
H6FGLB
Price
Gauge
Code
26 ga.
H6F__ __B
H7 Slag Stop
• .032 Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).
H7
Gauge
Code
.032
H-73__ __
Price
Vented Drip Edge - 5.0 Sq. In. of Net Free Area per Linear Ft.
• .027 Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Mill Finished (MF).
Vented
Gauge
Code
.027
VDE-__ __
Price
Copper - 200'/ctn.
Gauge
Code
16 oz.
VDE-CP
Price
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 70
1/07
ODE Overhanging Drip Edge
• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA), Dark Bronze (DB), Black (BK) and Clay (CL).
ODE
Gauge
Code
.019
ODE-__ __
.016
ODE__ __6
Price
Copper - 150'/ctn.
Gauge
Code
16 oz.
ODE-CP
Price
ODLR Drip Edge
• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA), Clay (CL), Black (BK), Desert Tan (DT), Ivory (IA),
Light Bronze (LB), Musket Brown (MB), Prairie Sand (PS) and Sandstone Beige (SB).
ODLR
DC1
Gauge
Code
.019
ODLR__ __
Price
DC1, DC2, DC3, DCW 3/4, DCW 1 1/8, and DCW 1 5/16 Drip Cap
Painted Aluminum
Gauge
DC2
Code
Price
DC1 - 500'/ctn.
.0125
DC1WA2
DC2 - 1000'/ctn.
DC3
.0125
DC2WA2
DC3 - 1000'/ctn.
DCW 3/4
.0125
DC3WA2
DCW 3/4 - 1000'/ctn.
.0125
DCW 1 1/8
DCW 1 1/8 - 1000'/ctn.
.0125
DCW 1 5/16
DCWW34
DCWW18
DCW 1 5/16 - 1000'/ctn.
.0125
DCWW56
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 71
1/07
2" Round Ridge Roll
• Aluminum is Available in White (WA), Brown (BA) and Mill Finished (MF).
Gauge
Code
.019
RRO__ __2
Price
Copper - 100'/ctn.
Gauge
Code
16 oz.
RROCP2
Price
Gauge
Code
28 ga.
RRO282
Price
Deck Ledger Flashing Cap - 40 pcs./ctn.
• Fits Over Ledger Board and Behind Siding to Protect from Water Damage.
Plastic - 320'/ctn.
Color
Code
Gray
DLPGR8
Price
“W” Valley - 10' Lengths
• .019 Painted Aluminum is Available in Black (BK) and Brown (9B).
W
.019 Painted Aluminum
Size
Code
18”
24”
Price
16 Oz. Copper
Size
Code
WF__ __18
18”
N/A
24”
Price
Size
Code
WFCP18
18”
WFCP24
24”
Price
26 Gauge G90 Galv. Steel
Size
Code
WF2618
18"
WFG9018
N/A
24"
WFG9024
Price
“V” Valley
• .032 Painted Aluminum is Available in Brown (B) and Black (K).
• Copper is Available in 10' Lengths Only.
• Mill Finished Aluminum and Galvanized Steel is Available in Various Lengths - 10' (1) and 8' (8).
V
ENTER LENGTH/COLOR WHEN ORDERING
.032 Painted Aluminum
Size
Price
18"
V1__318
Code
Size
Code
18"
V1MF18
Price
16 Oz. Copper
Size
Code
18"
V1CP18
Price
Size
Code
18"
V__2618
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Price
Page 72
1/07
Brick Molding
Gauge
Code
.019
BMCWA9
Price
CornerFlex® Flashing - 20 pcs./ctn.
• Sold in Full Box Quantities Only.
Gauge
Code
.012
FCF-MF
Price
Polypropylene Kick-Out Diverters - 30 pcs./ctn.
•
•
•
•
•
Durable polypropylene copolymers with UV & heat stabilizers.
Available in Brown (B), Grey (G), Tan (T) and White (W).
Patented design creates downward and outward water flow away from walls.
Helps prevent water intrusion at roof to wall intersections.
Easy to install & works with all leading roofing & wall cladding systems.
ENTER LENGTH/COLOR WHEN ORDERING
Left Diverter
Code
Right Diverter
Price
KOL__
Code
Price
KOR__
Copper Kick-Out Diverter - 5 pcs./ctn.
• Available in 16 Oz. Copper.
Left Diverter
Code
KOLCP
Right Diverter
Price
Code
Price
KORCP
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 73
1/07
ALUMINUM SOFFIT &
ACCESSORIES
10" QLOK .019 Aluminum Soffit 120'/ctn. 1 sq./ctn. 10 pcs./ctn.
9.6 In2 Net Free Area/Ft2
12' per piece
• Available in White (WA), Royal Brown (BA), Dark Bronze (DB), and Clay (CL).
SOLID (NON-VENTILATED)
QLOK SYSTEM:
Code
VENTILATED
Price
QS10__ __
Code
Price
QV10__ __
15" QLOK .019 Aluminum Soffit 12' per piece
• Available in White (WA) and Royal Brown (BA).
QLOK SYSTEM:
Code
Price
QS15__ __
VENTILATED
Code
Price
QV15__ __
12" TRAPLOK .019 Aluminum Soffit 120'/ctn. 1.2 sqs./ctn. 10 pcs./ctn.
12' per piece
• Available in White (WA), Royal Brown (BA) and Dark Bronze (DB).
TRAPLOK SYSTEM:
Code
Price
SV12__ __
VENTILATED
Code
Price
LV12__ __
12" PRO LOCK V-Groove 16 Oz. Copper Soffit Custom Lengths
Berger will manufacture our Copper Soffit to size for your job. This product is not
for use as vertical siding and cannot be run in lengths longer than 24 inches unless
specifically engineered and quoted for the job. Please call for availability.
• This is a Non-Stock Item and may Require Extended Lead Time.
Code
Price
VENTILATED
Code
Price
PRO LOCK SYSTEM:
SS12C2
SV12C2
PRODUCT INFORMATION:
• QLOK style is recommended for use in coastal or windy environments.
• Attachment of soffit requires nailing on 12" centers when used in areas subjected to wind uplift and vibration.
• Short soffit overhangs of 16" or less require at least 1 nail per piece central of the hem.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
SOFFIT AND VENTILATION PRODUCTS
120'/ctn. 1.5 sqs./ctn. 10 pcs./ctn.
Page 74
1/07
ALUMINUM SOFFIT &
ACCESSORIES
AccuVent™ Soffit Insulation Baffler - 50 pcs./bundle - 56 bundles/skid
• AccuVent is 22.5" x 41" and Fits Any Size Roof or Truss
• Installs with Six Staples
• Perforated for Adjusted Roof Truss Spacing
100% Recycled PVC
Code
Price
ACCUVENT
.024 Aluminum Fascia - 300'/ctn. 25 pcs./ctn.
•
•
•
•
4" Fascia is Available in White (WA) and Royal Brown (BA).
6" Fascia is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Clay (CL).
8" Fascia is Available in White (WA), Clay (CL) and Royal Brown (BA).
10" Fascia is Available in White (WA), Royal Brown (BA) and Dark Bronze (DB).
4"
Code
6"
Price
FAS4__ __
Code
FAS6__ __
8"
Price
Code
10"
Price
FAS8__ __
Code
Price
FAS1__ __
.019 Aluminum Fascia - 300'/ctn. 25 pcs./ctn.
• 6" Fascia is Available in White (WA), Desert Tan (DT), Granite Gray (GR), Ivy Green (IG), Light Bronze (LB), Natural Clay (NC),
Prairie Sand (PS) and Sandstone Beige (SB).
6"
Code
Price
FA96__ __
.019 Aluminum 1/2 “F” Channel - 300'/ctn. 25 pcs./ctn.
• Painted Aluminum is Available in White (-W), Brown (-B), Clay (CL), Dark Bronze (DB) and Light Bronze (LB).
Code
Price
FA50__ __
.019 Aluminum 1/2 “J” Channel - 600'/ctn. 50 pcs./ctn.
• Painted Aluminum is Available in White (-W) and Royal Brown (-B).
Code
Price
JA50__ __
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
ALUMINUM SOFFIT &
ACCESSORIES
Page 75
1/07
.019 Aluminum 1/2 Economy “J” Channel - 600'/ctn. 50 pcs./ctn.
• Painted Aluminum is Available in White (EW), Brown (BA), Clay (CL), Dark Bronze (DB), Desert Tan (DT), Sandstone
Beige (SB) and 16 Oz. Copper (CP).
Code
Price
JA50__ __
.019 Aluminum 3/4 “J” Channel - 600 ft. per ctn.
Code
Price
Starter Strip - Aluminum 500 ft. per ctn. - Galvanized Steel 250 ft. per ctn.
• Galvanized Steel Starter Strip Does Not have Nail Holes or Slots
Aluminum - 10'
Code
Price
ALSS10
Galvanized Steel - 10'
Code
Price
GLSS10
Starter Strip - Aluminum 394 ft. per ctn. - 10' Galvanized Steel 250 ft. per ctn. 118" Galvanized Steel 197 ft. per ctn.
• 10' Galvanized Steel Starter Strip Has Nail Holes or Slots
Aluminum - 118"
Code
Price
ALS118
Galvanized Steel - 10'
Galvanized Steel - 118"
Code
Code
Price
GLSS10N
Price
GSS118
Aluminum Soffit Cove Moulding - 25 per ctn. - 300 ft. per ctn.
• Painted Aluminum is Available in White (W) and Royal Brown (B) and is .019.
Code
Price
RCM__12
Aluminum Utility Trim - 600 ft. per ctn.
Code
Price
UT19WA
Pro-Master Ridge Vent™
• Nails Included - Both Hand and Power
ROLL LENGTH
20' roll
50' roll
DIMENSION
10 1/2" x 3/4" x 20'
10 1/2" x 3/4" x 50'
CODE
PMRV20
PMRV50
PRICE
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
J-34WA
DRYSNAP™ UNDER DECK RAIN CARRYING SYSTEM
DRYSNAP™ - UNDER DECK
RAIN CARRYING SYSTEM
DrySnap™ - Under Deck Rain Carrying System
• Maximize Your Outdoor Living Space
• Vinyl Ceiling Panels Collect and Drain Water to Provide a Dry Space
• Provides a Maintenance Free Ceiling that Covers the Unsightly
Underside of Your Deck
• Easy Snap-Together Installation Under Any Raised Deck
• All Weather Protection
• 10 Year Limited Warranty
Starter Piece - 12 pcs. per ctn.
12' Starter Piece
Code
16' Starter Piece
Price
37320
Code
Price
37321
Vinyl Panel - 12' - 12 pcs. per ctn.
12' Vinyl Panel
Code
16' - 9 pcs. per ctn.
16' Vinyl Panel
Price
37325
Code
Price
37324
Joist Bracket - 36 pcs. per ctn.
2" x 24"
Code
Price
100S-RH
Pitch Spacers - 32 pcs. per bag / 384 pcs. per ctn.
1/4" x 2" x 2"
Code
Price
37351
Trim Cap - 14 pcs. per ctn.
12' Trim Cap
Code
Price
37331
Stainless Steel Deck Screws - 50 pcs. per pack
2 1/2" Screws
Code
3" Screws
Price
84178
Code
Price
84179
Gutter Screws & Ferrule (for Hanging Gutter) - 10 pcs. per ctn.
6 1/2" Screws & Ferrule
Code
Price
84181
For FREE DrySnap Job Material Estimates or Technical Questions, Please Call Berger at (800) 523-8852.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 76
1/07
Page 77
1/07
COIL PRODUCTS
Standard .019 Aluminum Trim Coil Colors - 50' Rolls
SOLD IN CARTON QUANTITIES ONLY.
• 12" Width = 2 Rolls per ctn.
• 14" and 24" Widths = 1 Roll per ctn.
COLOR DESCRIPTION
14"
24"
7"
14"
24"
24"
24"
12"
14"
24"
24"
14"
24"
24"
24"
CODE
Black / Lomar White
Black / Lomar White
Black / Royal Brown
Black / Royal Brown
Black / Royal Brown
Light Bronze / Dark Bronze
Dark Bronze / Lomar White
Lomar White / Lomar White
Musket Brown / Lomar White
Royal Brown / Lomar White
Royal Brown / Lomar White
Black / Black
Terratone Bronze / Lomar White
PRICE
200-14
200-24
202-07
202-14
202-24
800-24
801-24
100-12
100-14
100-24
700-24
201-14
201-24
204-24
803-24
Special .019 Aluminum Trim Coil Colors - 50' Rolls - 1 Roll per ctn.
WIDTH
24"
24"
24"
24"
24"
24"
24"
24"
COLOR DESCRIPTION
CODE
Ivory / Lomar White
Barn Red / Lomar White
Window White / Window White
Clay / Lomar White
Desert Tan / Snow White
Pewter Grey / Lomar White
Grecian Green / Lomar White
Prairie Sand / Lomar White
PRICE
105-24
CBR-24
NBW-24
BCL-24
DT-24
PG-24
203-24
CPS-24
WIDTH
24"
24"
24"
24"
24"
24"
24"
COLOR DESCRIPTION
Snow White / Snow White
Wolverine Almond / Lomar White
Sandstone Beige / Lomar White
Cream / 280 White
Ivy Green / 280 White
Granite Grey / Lomar White
Herringbone / 280 White
CODE
SW-24
452-24
SB-24
CRM-24
IG-24
GG-24
HB-24
Standard .019 PVC Coated Aluminum Trim Coil Colors - 50' Rolls
• All .019 PVC Coated Aluminum Trim Coil has a wash coat on reverse side of coil.
WIDTH
24"
24"
COLOR DESCRIPTION
White
Musket Brown
CODE
PRICE
500-24
501-24
Standard .027 and .032 Aluminum Gutter Coil
SOLD IN SKID QUANTITIES ONLY. 3 Rolls per skid. Approximate Weight: 375 lbs. per roll
• Available in High Gloss White, Low Gloss White and Royal Brown.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
PRICE
COIL PRODUCTS
WIDTH
Page 78
1/07
COIL PRODUCTS
Copper Gutter Coil - 1 Roll per Skid - Approx. 500 lbs. per Roll
• Copper is 16 Oz. and is Sold in Full Skids Only.
SIZE
11 3/4" girth, 5K
11 7/8" girth, 5K
15" girth, 6K
CODE
GC6CP1175
GC6CP11875
GC6CP15
PRICE
Follansbee Seamless Virotin Terne II - 50’ Rolls
•
•
•
•
Virotin is Carbon Steel Coated with a Two Phase Zinc / Tin Alloy.
28 Gauge Available in Full Skids Only.
Rolls are Coated Both Sides.
All Terne Coated Rolls are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks. Special Orders
are Not Subject to Cancellation or Return.
SIZE
14" girth
20" girth
24" girth
28" girth
CODE
IC4014
IC4020
IC4024
IC4028
PRICE
COIL PRODUCTS
Mill Finished Aluminum Economy Valley Flashing - 50' Rolls
Gauge .009 - Economy
SIZE
6"
8"
10"
12"
14"
16"
20"
24"
CODE
MFEV06
MFEV08
MFEV10
MFEV12
MFEV14
MFEV16
MFEV20
MFEV24
PRICE
Mill Finished Aluminum Versa Valley Flashing - 50' Rolls
Gauge .0078 - Versa
SIZE
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
CODE
MFVR04
MFVR06
MFVR08
MFVR10
MFVR12
MFVR14
MFVR16
MFVR18
MFVR20
MFVR24
PRICE
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 79
1/07
COIL PRODUCTS
Mill Finished Aluminum Standard Valley Flashing - 50' Rolls
Gauge .014 - Standard
SIZE
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
CODE
MFST04
MFST06
MFST08
MFST10
MFST12
MFST14
MFST16
MFST18
MFST20
MFST24
PRICE
Galvanized Steel Standard Valley Flashing - 50' Rolls
30 Gauge - Standard
SIZE
6"
8"
10"
12"
14"
16"
18"
20"
24"
28"
CODE
GLST06
GLST08
GLST10
GLST12
GLST14
GLST16
GLST18
GLST20
GLST24
GLST28
PRICE
Galvanized Steel G90 Valley Flashing - 50' Rolls
• 18" and 20" Premium Valley Flashings are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks.
26 Gauge - G90
SIZE
16"
18"
20"
CODE
VGL-16
VGL-18
VGL-20
PRICE
Mill Finished Aluminum Commercial Valley Flashing - 50' Rolls
SIZE
14"
20"
CODE
MFCM14
MFCM20
PRICE
Gauge .0167 - Commercial
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page 80
1/07
COIL PRODUCTS
16 Oz. Soft Copper Economy Valley Flashing Rolls - 100 lb. Rolls
• 12" and 16" are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not
Subject to Cancellation or Return.
SIZE
12"
16"
20"
24"
CODE
CPEV12
CPEV16
CPEV20
CPEV24
PRICE
APPROX. LENGTH
100'
75'
60'
50'
Metal Bender Tool with 3 1/2" Blade - 12 pcs./ctn.
• Die Cast Aluminum.
Code
Price
M-BEND
7" & 10" Blades for Metal Bender Tool - 12 cards/ctn.
COIL PRODUCTS
Code
Price
710-BLA
16 Oz. Cold Rolled Copper Sheets
SOLD IN SKID QUANTITIES ONLY. 3' x 8' Sheets have 80 Sheets/Skid or approx. 1920 lbs.. 3' x 10' Sheets have 65
Sheets/Skid or approx. 2000 lbs..
SIZE
3' x 8'
3' x 10'
CODE
PS1696
PS16CP
PRICE
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
TECHNICAL REFERENCE
APPENDIX
Page A1
1/07
Berger requires that all materials be evaluated for fitness of use by the user prior to application. Berger will not be
responsible for misapplication of product, incorrect material or defects that were obvious at time of installation;
consequential damage, schedule delays, labor and equipment rental. Our warranty is limited to our cost of material
on product determined to be a manufactured defect. Claims for defective material damaged due to snow and/or ice
loads are not covered by our warranty unless Berger snow guards have been utilized and installed per our installation
instructions. For further information on proper use of these products please review this Technical Reference Appendix, the SMACNA Architectural Sheet Metal Manual 5th Edition or the AIA Architectural Graphic Standards 6th Edition.
1. Metal Specifications
A2
a. Specifications for Coil & Sheet Metal Goods Used
In The Production of Gutter & Downspout
2. General Roof Drainage System Information
a. Proper Gutter and Downspout Sizing
A2
A3-A11
A3-A11
b. Gutter Hanger Selection
A10
c. Recommended Gutter Hanger Spacing
A10
d. Recommended Gutter Position
A10
e. Lap Joint Specification
A10
f. Typical Gutter Hanger Details
A11
A12-A15
a. Galvanic Corrosion
A12
b. Expansion of Metals Used for Roof Drainage Systems
A13
c. Basic Soldering Terms and Techniques
A13-A15
d. Storage and Handling of Product
A15
e. Patina Chemical Sources
A16
The information included in this Appendix has been derived from The SMACNA Architectural Sheet Metal Manual 5th Edition and the AIA Architectural Graphic Standards
6th Edition. For full copies of these industry manuals please contact:
Sheet Metal and Air Conditioning Contractors National Association, Inc. (SMACNA)
4201 Lafayette Center Drive, Chantilly, VA 22021
Phone: (703) 803-2980 • Fax: (703) 803-3732
Website: www.smacna.org • E-Mail: info@smacna.org
The American Institute of Architects (AIA)
1735 New York Ave., NW, Washington, DC 20006
Phone: (800) AIA-3837 • Fax: (202) 626-7547
Website: www.aia.org • E-mail: infocentral@aia.org
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
TECHNICAL REFERENCE APPENDIX
3. Related Technical Information
Page A2
1/07
SPECIFICATIONS FOR COIL & SHEET METAL GOODS USED
IN THE PRODUCTION OF GUTTER & DOWNSPOUT
1. Aluminum
A. Mill Finished Aluminum
i. Metal: ASTM B209 – Temper & Alloy 3105 H14
ii. Finish: None
B. Painted Aluminum
i. Metal: ASTM B209 – Temper & Alloy 3105 H14
ii. Finish: .65 - .70 Mil Thick Polyester Finish
C. Kynar 500® Painted Aluminum
i. Metal: ASTM B209 – Temper & Alloy 3003 / 3105 H14
ii. Finish: Contact Berger for Technical Data on Kynar 500® Coating
2. Steel
A. Galvanized Steel
i. Metal: ASTM A653 – LFQ (Lock Form Quality)
ii. Finish: Hot Dipped Galvanized Zinc Coating
B. Paintgrip Galvanized Steel
ii. Finish: Hot Dipped Galvanized Zinc Coating with a Bonderized / Phosphatized Finish
C. Painted Galvanized Steel
ii. Finish: Hot Dipped Galvanized Zinc Coating with a .20 - .30 Mil Thick Epoxy and a .70 - .80 Mil Polyester Finish
D. Stainless Steel
i. Metal: 304 Alloy
ii. Finish: 2B
3. Copper
A. Natural Copper
i. Metal: ASTM B370 – CDA110 or CDA 122 Alloy – Cold Rolled
ii. Finish: None
B. Lead Coated Copper
i. Metal: ASTM B101 – Class A Type 1 & Type 2
ii. Finish: Lead Coating
C. Revere Freedom Gray® Zinc Coated Copper
ii. Finish: Z – T Alloy (Zinc – Tin)
D. Revere Ever Green® Pre-Patinated Copper
ii. Finish: Artificially Accelerated Crystalline Patina
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A3
1/07
PROPER GUTTER AND DOWNSPOUT SIZING
RAINFALL INTENSITY - DOWNSPOUT CAPACITY
The roof is one of the most essential parts of a building as it
protects occupants, contents, and interior of the structure
from the elements. Once an architect has determined the
kind of roof he intends to use, he must give equal attention
to the design of the roof drainage system.
Factors to be considered in the design of roof drainage systems are the area to be drained, size of gutters, downspouts,
outlets, slope of roof, type of building, and appearance.
ROOF AREA TO BE CONSIDERED
The design capacity for a roof drainage system depends on
the quantity of water to be handled. The quantity of water in
turn depends on the roof area, slope, and rainfall intensity.
In considering the roof area, it must be remembered that
rain does not necessarily fall vertically and that maximum
conditions exist only when rain falls perpendicular to a surface. Since the roof area would increase as its pitch increases,
then it would not be advisable to use the plan area of a pitched
roof in the calculation of a drainage system.
Experience has taught that use of the true area of a pitched
roof often leads to oversizing of gutters, downspouts, and
drains. To determine the design area for a pitched roof, Table
1-1 is used.
TABLE 1-1
DESIGN AREAS FOR PITCHED ROOFS
PITCH
in./ft.
Level to 3
4 to 5
6 to 8
9 to 11
12
*B
mm/mm
76/305
102-127/305
152-203/305
229-279/305
305/305
1.00
1.05
1.10
1.20
1.30
* To determine the design area multiply the plan area by the factor in B column
These areas are then divided by the proper factor given in
Table 1-2, thus obtaining the required area in square inches
(square mm) for each downspout. From Table 1-3 select the
downspout.
Rainfall intensity is usually given in inches per hour for a
five minute duration or one hour duration based on U.S.
Weather Bureau records. Table 1-2 based on records
through 1978, gives five minute intensities for selected
cities. New Orleans, Los Angeles, for example, may have
8 in./hr.(203 mm/hr) for a five minute duration yet record
only 4.8 in. (121 mm) in an hour over a 100 year period.
These rates correspond to 0.133 in./min.(3.4 mm/min.)
and 0.08 in./min.(2 mm/min.). Local codes may require
that drainage systems only be designed for the latter. It
takes 96.15 square feet(8.93 square meters) of surface
with 1 inch per hour(25 mm/hr) of water to correspond
with 1 gpm (0.063 l/s) flow rate. Downspouts and gutters
are sized in relation to rainfall on this basis.
Plumbing codes typically use the vertically projected roof
area for drainage design and they often use a square foot
allowance per square inch of downspout for 1 in./hr.(25
mm/hr) rainfall that varies with diameter, for example, 3
in.(76 mm): 911(85); 4 in.(102 mm): 1100 (102); 5
in.(127 mm): 1280 (119); 6 in.(152 mm): 1400 (130) and
8 in.(203 mm): 1750 (163) sq. ft.(sq. m). Net drainage
capacity from using Table 1-1 and 1-2 should be compared with local code requirements.
DOWNSPOUT SIZING
In sizing downspouts, the following considerations apply:
1. Downspouts of less than 7.00 sq in.(4515 sq mm)
cross section should not be used except for small areas
such as porches and canopies.
2. The size of the downspout should be constant throughout its length.
3. Downspouts should be constructed with conductor
heads every 40 ft(12.2 m) to admit air and prevent
vacuum.
4. Offset of more than 10 ft(3.0 m) can affect drainage
capacity.
5. The gutter outlet capacity should suit the downspout
capacity.
6. The downspout size must suit the bottom width of the
gutter.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
DESIGN OF ROOF DRAINAGE SYSTEMS
ROOF DRAINAGE
Page A4
1/07
TABLE 1-2
RAINFALL DATA AND DRAINAGE FACTORS
A
STORMS WHICH SHOULD BE
EXCEEDED ONLY ONCE IN
10 YEARS
Intensity lasting
5 minutes
ALABAMA: Birmingham
Mobile
ALASKA: Fairbanks
Juneau
ARIZONA: Phoenix
Tucson
ARKANSAS: Bentonville
Little Rock
CALIFORNIA: Los Angeles
Sacramento
San Francisco
San Diego
COLORADO: Denver
Boulder
CONNECTICUT: Hartford
DISTRICT OF COLUMBIA
FLORIDA: Jacksonville
Miami
Tampa
GEORGIA: Atlanta
HAWAII: Honolulu
Kahului
Hilo
Lihue
IDAHO: Boise
ILLINOIS: Chicago
INDIANA: Indianapolis
IOWA: Des Moines
KANSAS: Wichita
KENTUCKY: Louisville
LOUISIANA: New Orleans
MAINE: Portland
MARYLAND: Baltimore
MASSACHUSETTS: Boston
MICHIGAN: Detroit
MINNESOTA: Minneapolis
Calculated roof area
drained per
downspout area
B
100 YEARS
Intensity lasting
5 minutes
drained per
downspout area
in/hr
mm/hr
sq/ft
sq in
sq m/
100 sq mm
in/hr
mm/hr
sq/ft
sq in
sq m/
100 sq mm
7.5
8.2
2.1
1.7
5.6
6.1
7.4
7.4
4.9
2.5
2.7
2.2
5.7
6.4
6.2
7.1
7.9
7.7
8.3
7.3
8.7
7.0
17.4
10.4
1.8
6.8
6.8
7.3
7.5
6.9
8.3
5.4
7.1
5.3
6.4
7.0
191
208
53
43
141
155
187
187
124
64
68
57
146
164
158
180
200
195
212
186
221
177
442
265
46
172
173
186
191
175
211
136
181
134
162
178
160
150
570
700
220
200
160
160
250
480
450
540
210
190
190
170
150
160
140
160
140
170
70
110
660
180
180
160
160
170
140
220
.170
230
190
170
2.30
2.10
8.30
10.10
3.10
2.80
2.30
2.30
3.50
6.90
6.4
7.80
3.00
2.70
2.8
2.4
2.20
2.20
2.10
2.4
2.00
2.50
1.00
1.70
9.50
2.60
2.50
2.40
2.30
2.50
2.10
3.20
2.40
3.3
2.70
2.50
10.1
10.8
3.8
2.3
8.8
9.1
10.2
10.0
6.7
3.9
3.7
3.1
9.1
9.4
8.7
9.7
10.1
9.8
10.8
9.9
12.0
12.0
19.2
14.4
3.3
9.3
9.4
10.3
10.5
9.4
10.9
7.6
9.7
7.2
8.9
10.0
256
274
97
57
224
232
259
253
170
100
93
78
232
238
221
247
256
250
274
251
305
305
488
366
84
236
239
262
267
238
277
192
247
183
226
253
120
110
310
530
140
130
120
120
180
310
330
390
130
130
140
120
120
120
110
120
100
100
60
80
360
130
130
120
110
130
110
160
120
170
140
120
1.7
1.6
4.5
7.60
2.00
1.90
1.70
1.70
2.60
4.40
4.70
5.60
1.90
1.80
2.00
1.80
1.70
1.80
1.60
1.70
1.40
1.40
0.90
1.20
5.20
1.90
1.80
1.70
1.60
1.80
1.60
2.30
1.80
2.40
1.90
1.70
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A5
1/07
TABLE 1-2
RAINFALL DATA AND DRAINAGE FACTORS (Continued)
Intensity lasting
5 minutes
MISSOURI: Kansas City
Saint Louis
MONTANA: Helena
Missoula
NEBRASKA: Omaha
NEVADA: Reno
Las Vegas
NEW JERSEY: Trenton
NEW MEXICO: Albuquerque
Santa Fe
NEW YORK: Albany
Buffalo
New York City
NORTH CAROLINA: Raleigh
NORTH DAKOTA: Bismark
OHIO: Cincinnati
Cleveland
OKLAHOMA: Oklahoma City
OREGON: Baker
Portland
PENNSYLVANIA: Philadelphia
Pittsburgh
RHODE ISLAND: Providence
SOUTH CAROLINA: Charleston
TENNESSEE: Memphis
Knoxville
TEXAS: Fort Worth
Dallas
Houston
San Antonio
UTAH: Provo
Salt Lake City
VIRGINIA: Norfolk
WASHINGTON: Seattle
Spokane
WEST VIRGINIA: Parkersburg
WISCONSIN: Madison
Milwaukee
WYOMING: Cheyenne
drained per
downspout area
B
100 YEARS
Intensity lasting
5 minutes
drained per
downspout area
in/hr
mm/hr
sq/ft
sq in
sq m/
100 sq mm
in/hr
mm/hr
sq/ft
sq in
sq m/
100 sq mm
7.4
7.1
1.8
1.8
7.4
2.3
2.1
6.7
4.0
4.5
6.5
6.0
6.7
7.3
6.6
6.8
6.3
7.6
2.2
2.1
6.8
6.4
5.6
7.2
7.4
6.7
7.6
7.6
8.2
7.6
3.0
2.8
7.1
2.1
2.1
6.6
6.8
6.6
5.7
187
181
46
46
188
57
53
170
102
115
165
152
169
185
167
172
160
193
56
53
172
163
143
184
187
169
193
194
208
193
75
71
181
53
53
168
172
168
146
160
170
660
660
160
530
570
180
300
270
190
200
180
160
180
180
190
160
550
570
180
190
210
170
160
180
193
160
150
160
410
430
170
570
570
180
180
180
210
2.30
2.40
9.50
9.50
2.30
7.60
8.3
2.60
4.30
3.80
2.70
2.90
2.60
2.40
2.60
2.50
2.70
2.30
7.90
8.30
2.60
2.70
3.10
2.40
2.30
2.60
160
2.30
2.10
2.30
5.80
6.20
2.40
8.30
8.30
2.60
2.50
2.60
3.00
10.4
9.9
3.1
2.4
10.5
4.5
5.2
9.3
6.7
6.4
9.1
8.4
9.2
9.8
9.8
9.3
8.8
10.5
3.8
3.0
9.4
8.8
7.8
9.4
10.0
9.0
10.5
10.5
10.8
10.5
5.2
4.3
9.5
3.3
3.5
9.1
9.5
9.1
9.9
265
251
77
61
267
114
133
236
171
169
232
213
235
250
250
236
223
267
97
76
238
224
198
238
253
229
267
267
274
267
131
108
242
84
90
230
241
232
252
110
120
390
500
110
270
230
130
180
180
130
140
130
120
120
130
140
110
310
400
130
140
150
130
120
130
110
110
110
110
230
280
130
360
340
130
130
130
120
1.70
1.70
5.70
7.20
1.60
3.90
3.30
1.90
2.60
2.60
1.90
2.10
1.90
1.80
1.80
1.90
2.00
1.60
4.50
5.80
1.80
2.00
2.20
1.80
1.70
1.90
1.60
1.60
1.60
1.60
3.30
4.10
1.80
5.20
4.90
1.90
1.80
1.90
1.70
These intensities are based on records and statistical projections. They may occasionally be exceeded either in the general area or at small areas within the designated city.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
A
10 YEARS
Page A6
1/07
TABLE 1-3
DIMENSIONS OF STANDARD DOWNSPOUTS
TYPE
AREA
“A”
Size
Plain
Round
sq.in.
7.07
12.57
19.63
28.27
50.24
sq.mm.
4560
810
12661
18234
32404
sq.in
5.94
11.04
17.71
25.95
47.15
Corrugated
Round
5.94
11.04
17.72
25.97
3831
7120
11429
16750
Plain
Rectangular
3.94
6.00
12.00
20.00
24.00
2541
3870
7740
12900
15480
3.00
4.80
10.31
15.75
21.56
Rectangular
Corrugated
3.80
7.73
11.70
18.75
2451
4985
7621
12213
3.00
6.38
10.00
16.63
Nominal
Size
sq.mm.
3831
7120
11422
16737
30411
Actual
in.
3
4
5
6
8
mm.
76
102
127
152
203
in.
3
4
5
6
8
mm.
76
102
127
152
203
3
4
5
6
76
102
127
152
3
4
5
6
76
102
127
152
1935
3096
6649
10158
13906
2
3
4
5
6
51
76
102
127
152
1.75x225
2x3
3x4
3.75x4.75
4x6
44x57
51x76
76x102
95x121
102x152
1935
4155
6513
10832
2
3
4
5
51
76
102
127
1.75x2.25
2.37x3.25
2.75x4.25
3.75x5
44x57
60x83
70x108
95x127
“A” = area of 1/4 in.(6.4 mm) undersized inlet See Figures 1-31 and 1-32 for gage
7. Assuming that using the fewest number of downspouts
is desirable, their locations will be affected by
a. gutter capacity and length. To limit the effects of thermal expansion in gutters 50 ft(15.3 m) is a practical maximum length of gutter to be served by a downspout. Unless
special provisions are made for flexibility in downspouts,
gutters and their support systems, gutters should expand
away from downspouts and downspouts should not be located near gutter expansion joints. See expansion coefficients
in Appendix A-1 and expansion allowances in Figures 1-5 to 1-10.
b. the capacity of the inlet tube. See Table 1-3 and Figure
1-33. Also, a sharp bend at the inlet may clog.
c. potential for water freezing in downspouts and gutters. Open, partially open or corrugated styles downspouts
are suggested for areas subject to icing. Locating downspouts on the north side of buildings is not recommended
for such areas.
d. the appearance of the downspout system and a potential need for concealment. See Figures 1-31 and 1-32.
e. the greater capacity of a pitched gutter.
f. the downspout discharge location. Water disposal at
this location should be acceptable. See Figures 1-31 and 1-36.
g. the risk of gutter overflow from insufficient drainage
capacity. See Figures 1-4, 1-21, and 1-23.
h. a scupper serving a designated roof area. See Figures
1-26 to 1-30.
After the number and location of downspouts have been
determined, the areas to be drained by each downspout
should be figured. In making this calculation for a pitched
roof, the plan area should be adjusted according to recommendations given on Table 1-1.
SAMPLE PROBLEM: Select downspouts for a building in
Boston, Mass. The building is 100 x 85 ft.(30.5 x 26 m) with
a double pitched roof having a slope of 6 in./ft.(152 mm/m).
The slope is toward the 100 ft.(30.5 m) side. Maximum rainfall conditions will be used to determine downspout size.
It is decided to drain the building with 4 downspouts located
at each corner of the building. An expansion joint will be
installed in each gutter between the downspouts.
The plan area of this building is 8500 sq ft.(790 sq m). Since
the slope is 6 in./ft.(152 mm/m), factor 1.10 is used (Table
1-1), making the design area 9350 sq ft.(868 sq m). Thus
each of the four downspouts will serve a 2338 sq ft.(217 sq
m) area. From column B, Table 1-2, opposite Boston, it is
found that 1 sq in.(645 sq mm) of downspout will drain 170
sq ft.(16 sq m) of roof area. Divide 2338(217) by 170(16) to
determine that each downspout should have a minimum area
of 13.56 sq in.(8746 sq mm).
From Table 1-3, it is found that there is a choice of; a 5 in.
(127 mm) Plain Round, a 5 in.(127 mm) Corrugated Round,
a 5 in.(127 mm) Rectangular Corrugated, or 5 in.(127 mm)
Plain Rectangular downspout.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A7
1/07
GUTTER SIZING
HALF ROUND GUTTER SIZING
In sizing gutters, the following considerations apply for typical section lengths of 8 to 10 feet( 2.41 to 3.0 m):
Chart 1-2 is based on level gutter capacity as determined by
NIST. It is based on W = 0.0182 (lA)2/5. W is the width in
in.(mm). I denotes rainfall intensity (Table 1-2) and A is the
roof area in square feet(sq m) (Table 1-1).
Level gutters may be sized by Charts 1-1, 1-2, or 1-3. Sloped
gutters may be sized by Chart 1-3. Formulae for flow in gutters with different pitch are not available. The capacity of a
gutter with 1/16 in./ft.(5.21 mm/m) or less pitch is taken as
that of a level gutter even though it is somewhat greater.
RECTANGULAR GUTTER SIZING
The size of rectangular gutters depends upon these
factors:
1. Area to be drained. (A, Chart 1-1)
2. Rainfall intensity per hour. (I, Chart 1-1)
3. Length of gutter in ft.(m) (L, Chart 1-1)
4. Ratio of depth to width of gutter. (M, Chart 1-1)
Chart 1-1 is based on level gutter capacity as experimentally
determined by the National Institute of Standards and Technology (NIST) formerly National Bureau of Standards. It is
plotted from W = 0.0106 M-4/7 L3/28(1A)5/14 with W in feet(m).
IRREGULAR CROSS SECTION GUTTER SIZING
The required sizes of gutters other than rectangular or round
can be determined by finding the semicircle or rectangular
area that most closely fits the irregular cross section.
SAMPLE PROBLEM: To size rectangular gutter for a building 120 x 30 ft.(35.6 x 9.1 m) located in Buffalo, NY. This
building has a flat roof with a raised roof edge on three sides.
A gutter is to be located on one of the 120 ft.(35.6 m) sides.
So that each section of gutter will not exceed 50 ft.(15.2 m),
three downspouts will be used with 2 gutter expansion joints.
The area to be drained by each section of gutter will be 1200
sq ft.(111.5 sq m), the rainfall intensity from Table 1-2, col A
is 6 in/hr(152 mm/hr), the length of each gutter section is
40 ft.(12.2 m), and the ratio of gutter depth to width is 0.75.
On Chart 1-1 find the vertical line representing L = 40(12.2
m). Proceed vertically along this line to its intersection with
the oblique line representing M = 0.75. Pass to B vertically
to the intersect the horizontal line representing IA =
7200(16948). The point of intersection occurs between the
oblique line representing gutter widths of 5 and 6 in.(127
and 152 mm). The required width of gutter is, therefore, 6
in.(152 mm) and its depth need be only 4.5 in.(114 mm).in.
SAMPLE PROBLEM: To size a half round gutter for a building, located in Kansas City, Mo., with a flat roof 80 x 40
ft.(24.4 x 12.2 m). This building has a parapet wall on three
sides and a gutter to be located on an 80 ft.(24.4 m) side.
Column A, Table 1-2, was used to determine rainfall conditions. Since the gutter run will exceed 50 ft.(15.2 m), two
downspouts will be used with an expansion joint between.
The area of the building is 3200 sq ft.(297 sq m). Thus each
of the downspouts will serve an area of 1600 sq ft. (149 sq
m). From column A, Table 1-2, opposite Kansas City, Mo., it
is found that 1 sq in.(100 sq mm) of downspout will drain
160 sq ft.(2.3 sq m/100 sq mm) of roof area. Divide 1600 sq
ft.(149 sq m) by 160 sq ft/sq in.(2.3 sq m/100 sq mm) to
determine that each downspout should have a minimum area
of 10 sq in.(6470 sq mm). From Table 1-3 it is found that a4
in.(102 mm) downspout is required. From Chart 1-2 it is
determined that a 9.5 in.(241 mm) half round gutter should
be used. Area and flow in Table 1-4 are based on 1 in.(25
mm) of rainfall per hour; divide these areas by the local rainfall rate in inches per hour to determine the actual roof area
to be served by the gutter diameter. “The capacity of a sloped
rectangular gutter may be approximated by using a gutter
cross section area not less than that of a semicircular gutter
and a depth to width ratio of at least 0.75.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
1. Spacing and size of outlet openings. (The gutter can never
be any more effective than the outlet and downspout selected to drain it. Downspout sizes must not exceed the bottom width of the gutter.)
2. Slope of the roof. (The gutter must be of such a design
and location that water from a steep pitched roof will not by
its own velocity tend to overrun the front edge.)
3. Style of gutters to be used. (All gutters are not effective
for their full depth and width, see Figures 1-1 and 1-4 for
design data.)
4. Maximum length of gutter. (50 ft.(15.2 m) between ends
or expansion joints is the limit unless the system is especially designed to accommodate the greater expansion, the
larger flow and the need for special supports.)
5. Gutter support capability. (Supports should be based on
full capacity of the gutter. Ice load capacity also affect the
size and strength of the system.)
Page A8
1/07
CHART 1-1
WIDTH OF RECTANGULAR GUTTERS FOR GIVEN ROOF AREAS
AND RAINFALL INTENSITIES
117,983
40000
94,386
W
50000
=
)
m
m
)
9
m
27
m
)
m
m
4
25
9
m
35,395
)
8
m
m
)
52
m
m
27
)
(1
23,596
m
2
10
)
m
(
4"
16,989
)
m
m
7200
47,193
m
7
(1
(1
5"
10000
70,789
"(
3
7"
6"
15000
2
(2
0
(2
R
20000
8"
E
TT
GU
9"
OF
10
TH
"(
ID
11
W
30000
3"
(7
11,798
6
5000
)
m
m
4000
9,439
2"
(5
7,079
1
3000
)
m
m
2000
4,719
1500
3,539
IA = 1000
2,359
L = 1000
3.0
15
4.6
M=D
20
6.1
9.1
40
12.2
50
15.2
60
18.3
0.50
0.60
0.70
0.80
0.90
1.00
1.25
1.50
1.75
2.00
2.25
2.50
L = LENGTH OF GUTTER – METERS
/W
L = LENGTH OF GUTTER – FEET
(SERVED BY A DOWNSPOUT)
30
M = DEPTH/WIDTH
IA = RAINFALL INTENSITY x AREA (AREA FROM TABLE 1-1 THAT RELATES TO L)
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A9
1/07
CHART 1-2
HALF ROUND GUTTER SELECTION
Width required for given roof areas and rainfall intensities
Roof Area (A) (Square M)
19
28
37
47
56
74
93
139
10
9
7
n.
7 i mm
8
17
n.
5 i mm
7
12
n.
6 i mm
2
15
5
n.
8 i mm
3
20
6
372
4
305
279
254
229
203
178
152
127
n.
4 i mm
2
10
Rainfall Intensity (1) In. Per Hr.
8
279
in.
15 mm
1
in.
38
14 mm in.
6
35 13 mm
0
33 in.
12 mm
5
30 in.
11 mm
9
27
in.
10 mm
4
25
n.
9 i mm
9
22
11
186
102
Rainfall Intensity (1) mm. Per Hr.
9.3
12
n.
3 i mm
.2
76
3
100
200
300
400
500
600
800
1000
1500
2000
3000
4000
Roof Area (A) (square feet)
TABLE 1-4
SLOPED ROOF GUTTERS
Maximum Roof Area for Gutters
C.S. Area
Level
Level
1/8 in per ft slope
(3.2 mm/.3 m)
in
mm
sq in
sq mm
sq ft
sq m
gpm
l/s
sq ft
sq m gpm
3
76
3.5
2258
680
63
7
0.44
960
89
4
102
6.3
4064
1440
134
15
0.95
2040
5
127
9.8
6321
2500
232
26
1.64
6
152
14.1
9095
3840
357
40
7
178
5520
513
8
203
25.1
16190
7960
10
254
39.1
25220
14400
1/4 in per ft slope
(6.4 mm/.3 m)
l/s
sq ft
sq m
gpm
l/s
10
0.63
1360
126
14
0.88
190
21
1.33
2880
268
30
2.08
3520
327
37
2.33
5000
465
52
3.28
2.52
5440
505
57
3.60
7680
713
80
5.05
57
3.60
7800
725
81
5.11
11040
1030
115 7.26
739
83
5.24
11200
1040 116.
7.32
14400
1338
165 10.4
1338
150
9.47
20400
1895 212
13.4
28800
2676
299 18.9
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Diameter of
gutter
Page A10
1/07
GUTTER HANGER SELECTION
In deciding which hanger style is most acceptable, please consider such things as appearance, expected life, ice
loading, size of gutter, material and expansion.
When fascia board is less than 2" thick, the hanger fasteners must be driven into the rafter ends.
In areas subject to snow slide, coordinate the front edge elevation of the gutter with the extended roof line (see Table
on Required Clearance of Gutter Below Extended Roof Line).
RECOMMENDED GUTTER HANGER SPACING
Gutter hangers should be spaced at a maximum of 36" on center. In areas where ice and snow are long lasting, hanger
spacing should be reduced to 18" on center.
RECOMMENDED GUTTER PITCH AND
POSITION ON THE EAVE
There are two factors that go into determining gutter position on the eave, the pitch of the gutter and the roof slope.
Gutter should be pitched 1/16" or greater per foot for proper drainage. Gutter can be run level for appearance but
addition downspout will be necessary (See section on Proper Gutter and Downspout Sizing).
Gutters should be placed below the extended roof line so that snow and ice can slide clear. Steeper pitches require
less clearance.
Required Clearance of Gutter Below Extended Roof Line
Roof Pitch
Clearance Below Extended Roof Line
0 in 12 – 2 in 12
1"
3 in 12 – 5 in 12
3/4"
6 in 12 – 8 in 12
1/2"
9 in 12 or Greater
1/4"
LAP JOINT SPECIFICATION
Joints in gutters must be overlapped 1", riveted on 2" centers and soldered if the metal can be soldered (see soldering
instructions for details). With metals that cannot be soldered, a compatible sealant must be continuously applied
within a 1" lapped joint and the sealed lap must be riveted on 1" centers. All rivet applications must receive sealant
after installation. Lapping joints in the direction of flow is preferred; gutter outlet connections may not fit this
condition.
PENETRATING WALL FASTENERS
We recommend drilling holes in masonary and the use of metal hole inserts and/or epoxy sealant when installing
these pipe hook fasteners. Wall penetrations need to be sealed to prevent water intrusion and related problems.
Driving these into brick mortar joints will cause damage to the pipe hook fasteners and the wall.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A11
1/07
TYPICAL GUTTER HANGER DETAILS
Cornice Mounted Shank and Circle Roof Pitch of 8/12 or Greater will
Require an Extension Shank*
12
ine
of L
o
dR
e
end
Ext
Fascia Mounted Shank Plate Steep Roof Pitch or Small Fascia
Board may Need #10 or #30 Shank*
6
ine
o
dR
e
end
Ext
Wood
Cornice
3/4" Clearance
12
of L
Fasteners
#6 Shank
6
#1 Shank
Plate
3/4" Clearance
Nut & Bolt
Fasteners
Nut & Bolt
Circle
Circle
Lock shank against
dent on circle
Rafter Mounted Shank and Circle
with Square Cut Rafter Tails*
6
12
e
Lin
Fasteners
12
Fasteners
e
end
Ext
#11 Shank
ine
of L
o
dR
6
#30 Shank
Angled Fascia
Board
3/4" Clearance
3/4" Clearance
Nut & Bolt
Nut & Bolt
Circle
Circle
Shank should be perpendicular
to ground and parallel
to building face
Lock shank against
dent on circle
Roof Mount Shank and Circle with
Recessed Fascia Board - Roof
Pitch of 6/12 or Greater will
Require an Extension Shank*
6
12
Lock shank against
dent on circle
Shank should be perpendicular
to ground and parallel
to building face
Fascia Mounted Shank with 6" Fascia
Board - Roof Pitch of Greater than
12/12 will Require an Extension
Shank - Fascia Board of Less than 6"
will Require Extension Shank*
12
12
3/4" Clearance
Lin
6" Fascia Board
of
Ro
d
Ex
#12 or #25 Shank
(Angle may be carefully bent to
accommodate roof pitch. Shank
should be plumb to ground and
parallel to the wall face. Do not heat.)
ten
ten
de
L
Ex
oof
R
ded
e
Fasteners
ine
#10 or #30
Shank
Fasteners
Nuts & Bolts
1/4" Clearance
Circle
Lock shank against
dent on circle
Nut & Bolt
Extension Shank
(Shown in full extension - extension
shank should be positioned as high
up on the roof shank as possible
while keeping the gutter below the
extended roof line.)
Circle
Lock shank against
dent on circle
*Only 1 hole will line up with bolt Center distance on shank is 1/2". Center distance on circle is 3/8". This allows the gutter to be pitched by lowering the circle on the shank in increments of 1/8". Berger
does not imply fitness of use of our components in conjunction with competitors products. Berger will not warrant any system that incorporates products not manufactured by Berger.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
ed
end
Ext
of
Ro
Fascia Mount Shank and Circle with
Angled Fascia Board - Roof Pitch of
8/12 or Greater will Require an
Extension Shank*
Page A12
1/07
GALVANIC CORROSION
The selection of gutter material must account for the potential of Galvanic or Electrolytic Corrosion at contact points
with other metals and at supports. Also, special selection is required for corrosive environments such as coastal or
polluted industrial atmospheres. Galvanic or Electrolytic Corrosion can occur when dissimilar metals are in contact in
the presence of an electrolyte. An electrolyte is any non-metal substance that will conduct an electric current,
especially a liquid solution. Water, particularly rainwater, is a good electrolyte.
A galvanic scale has been developed for metals. Metals that are more electropositive (anodic) will corrode more
easily and metals that are more electronegative (cathodic) are more corrosion resistant. When two dissimilar metals
are in contact in the presence of an electrolyte, the electropositive metal will corrode. The farther the two metals are
from each other on the galvanic scale, the speed and effect of the reaction will increase.
GALVANIC SCALE
Electropositive / Anodic End
Zinc
Aluminum
Galvanized Steel
Cadmium
Mild Steel, Wrought Iron
Cast Iron
Stainless Steel, types 304 and 316 (active)
Tin - Lead Solder
Lead
Brass, Bronze
Copper
Stainless Steel, types 304 and 316 (passive)
Electronegative / Cathodic End
To reduce the tendency for galvanic corrosion to occur between dissimilar metals one or more of the following
actions can be taken:
1. Avoid contact between metals that are father apart on the scale.
2. Do not couple a small exposed area of a more electropositive (anodic) metal with a large area of a more
electropositive (cathodic) metal. Fasteners are a particular concern in this regard.
3. Coat the electropositive (cathodic) metal with a suitable paint or other non-metallic coating (or coat both
surfaces at their interface). Zinc chromate or bituminous coatings are often used.
4. Separate the metals by tape, gasket, waterproof paper, elastomeric sheet, sealant or other non-absorbent,
non-conductive material.
5. Do not allow moisture runoff from a more electronegative (cathodic) metal to drain on a more electropositive
(anodic) metal, even if the metals are not in contact.
6. Remove metal particles that are deposited from steel dies on formed metals (or prevent the deposits from
occurring).
Miscellaneous Information about Galvanic Corrosion:
1. Passivated stainless steel has been chemically cleaned, usually with an acid solution.
2. Anodized aluminum is considered compatible with all other metals.
3. Salts increase the electrical conductivity of water.
4. The discharge from drain pipes on rooftop air-conditioning units can be very corrosive, particularly if the
piping is copper and the drainage goes into galvanized steel scuppers, conductor heads or gutters.
5. Copper nails / fasteners should not be used for fastening galvanized steel roof panels even though the contact
area of the more electropositive (anodic) zinc coating is small compared to the more electronegative
(cathodic) copper metal. Galvanized steel nails / fasteners will corrode rapidly if used on copper roofing.
6. Many organizations and individuals have published corrosion tables. All of the tend to rank corrosion rates in
non-quantitative terms such as mild, moderate and severe. Rates of corrosion are also affected by conditions
such as seacoast, dry inland, acid rain and polluted industrial atmospheres.
Additional information on galvanic corrosion prediction is found in ASTM Standard G82 and ASTM STP 576.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A13
1/07
EXPANSION OF METALS USED FOR ROOF DRAINAGE
Increase in 50 ft Length of Material Due to an Increase in Temperature of 100° Fahrenheit
Increase (in inches)
Galvanized Steel
Copper
Stainless Steel
Aluminum
Zinc
13/32"
5/8"
5/8"
25/32"
1 1/32"
Note: Material will decrease in length by the same distances due to a decrease in temperature of 100° Fahrenheit.
Gutter Expansion:
It is essential to provide expansion joints in all gutter installations to allow for movement due to temperature changes.
In planning expansion joint locations, it must be recognized that an expansion joint acts as a dam in the gutter,
therefore, the number and placement of downspouts will be influenced (see section on Proper Gutter and Downspout
Sizing).
No gutter length should exceed 50 ft without an expansion joint. Expansion joints should be installed to comply with
the SMACNA Architectural Sheet Metal Manual 5th Edition page 1.16 to 1.17 – Allowances For Gutter Expansion.
There are two types of expansion joints commonly used in gutter installation, Lap Type and Butt Type. Both of these
types of expansion joints are easily fabricated on the jobsite using end caps and small amounts of sheet metal.
Details for both Lap Type and Butt Type can be found in the SMACNA Architectural Sheet Metal Manual 5th Edition
pages 1.18 to 1.21 – Lap Type Expansion Joint Figure 1-6 and Butt Type Expansion Joint Figure 1-7.
BASIC SOLDERING TERMS AND TECHNIQUES
The successful application of soldering requires several elements that include properly tinned coppers, application
and type of flux, properly blended solder, type of soldering tip, correctly heated coppers, properly prepared metal
surface free of oxidation and the skill of the person applying the solder.
Common Terms
Solder – Any of various fusible alloys, usually made of tin and lead, used to join metallic parts.
Soldering – joining or uniting of two or more pieces of metal by means of an alloy, usually tin and lead, having a lower
melting point than the pieces being joined.
Tinning – covering the point of a soldering copper or other surface with solder.
Flux – A substance applied to a surface to be joined by welding, soldering or brazing to facilitate the flowing of solder
and prevent formation of oxides.
Sal Ammoniac – another name for Ammonium Chloride (NH4Cl), is a white crystalline compound used as a soldering flux.
Zinc Chloride – (ZnCl) A substance, also called cut or killed acid, which is unequalled as a flux when soldering galvanized
steel, stainless steel and copper. It is colorless, odorless and corrosive; therefore it should be handled with care.
Muriatic Acid – The commercial grade of Hydrochloric Acid (HCl), also called raw acid, which is used for making Zinc
Chloride, used as a flux and for cleaning dirty parts of metal before they are soldered. It is colorless, has a sharp
pungent odor and is corrosive; therefore it should be handled with care.
Rosin – The by-product of oil of turpentine that is a common, non-corrosive type of flux for soldering copper. Rosin is
usually found in powder or paste form.
Oxide – A compound that is formed on the surface of a metal due to a reaction with the oxygen in the air.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Soldering Coppers – an instrument for soldering, consisting of a bit or bolt of copper having a pointed or wedgeshaped end, and furnished with a handle. Soldering Coppers can have various shapes for different kinds of work.
Page A14
1/07
BASIC SOLDERING TERMS AND TECHNIQUES
Preparation
Filing and Tinning Soldering Coppers
Unless the soldering copper is properly tinned, a good soldering job is impossible. Tinning keeps scale and
corrosion from forming on the soldering copper point that acts as insulation, allows the solder to flow properly
from the point to the metal, and keeps dirt and scale out of both the solder and the seam. For best results, use a
50% Tin – 50% Lead solder.
1.
Heat the copper to a cherry red and place it in a vise. Using a coarse file, remove pits and old tinning.
Then using a finer file, smooth off the rough edges of the corners of the point.
2.
Reheat the copper enough to melt the solder. Apply a small portion of solder to the tip and rub the tip
lightly back and forth on a block of Sal Ammoniac. If the solder does not adhere to the point, it is
because the soldering copper is not hot enough. Do not inhale the white smoke that should rise from
the Sal Ammoniac block. It is a toxic gas and should not be breathed.
3.
The solder copper should be neither overheated nor under heated during the tinning operation. If the
copper is too hot, the tin will burn off as fast as it is applied. If it is too cold, the solder will not adhere
to the copper.
Clean All Surfaces of Oxides, Dirt, Grease, and Other Foreign Matter
Unless the metal that is being soldered is clean, neither the solder nor the flux will adhere to the surface if the
metal.
Applying the Soldering Flux
Applying the flux is important. Carelessness in its application will ruin the entire solder procedure.
1.
Liquid Fluxes are applied with a small brush. Dip the brush and spread it lightly on the area to be
soldered. Do not apply flux anywhere except where the soldering is to be done.
2.
Powdered flux, such as rosin may be sprinkled onto the surface to be soldered or it can be melted on to
the metal with a hot copper. Do not apply flux anywhere except where the soldering is to be done.
3.
Flux will absorb moisture, which weakens its capability. Be sure to use fresh flux that has not been
diluted.
Soldering
Position of the Soldering Copper
The position of the soldering copper is important as it is applied to the parent metal because it heats the metal to
the melting point of solder and it keeps the solder in a liquid state while soldering.
1.
It is important that as much of the point of the copper is resting on the metal as possible to allow
maximum heat transfer from the tip to the metal. Most of the heat is in the body and the base of the
point of the soldering copper – not in the tip.
2.
Since melted solders flow to the hottest point of the metal, have the base of the soldering copper in
contact with the area in which the solder is to flow. When soldering a seam, allow the soldering copper
to heat the seam itself so solder will flow into the seam for a watertight seal.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A15
1/07
BASIC SOLDERING TERMS AND TECHNIQUES /
STORAGE AND HANDLING OF PRODUCT
Soldering Different Types of Metal
Different techniques and materials are needed to effectively solder different types of metal.
1. Galvanized Steel
a. If the galvanized steel is bright and clear, use Zinc Chloride as a flux to make a well-bonded joint.
b. If the galvanized steel is dull and dirty, use Muriatic Acid as a flux to allow the solder to bond.
c. For best results, use a 50% Tin – 50% Lead solder.
d. All flux should be washed off of the metal after soldering is complete.
e. There are many commercially marketed fluxes for soldering galvanized steel.
2. Copper
a. If the surface of the copper is free of oxide, it can be easily soldered using Zinc Chloride as a flux.
b. If the copper is dull, apply Muriatic Acid directly to the metal with an acid brush to clean the
surface. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chloride
as a flux.
c. For best results, use a 50% Tin – 50% Lead solder.
d. All flux should be washed off of the metal after soldering is complete.
e. There are many commercially marketed fluxes for soldering copper.
3. Stainless Steel
a. Apply Muriatic Acid directly to the metal with an acid brush to clean the surface.
b. Leave the acid on the surface of the metal for the required time (this varies with the type of
stainless steel and the strength of the acid).
c. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chloride as a flux.
d. For best results, use a 50% Tin – 50% Lead solder.
e. All flux should be washed off of the metal after soldering is complete.
f. There are many commercially marketed fluxes for soldering stainless steel.
STORAGE AND HANDLING OF PRODUCT
Berger products must be stored in a properly ventilated, dry environment to prevent condensation on metal surfaces.
Materials that are stored in areas subject to temperature variations, outside storage or subjected to moisture damage
are not returnable. Galvanized Steel and Zinc surfaces are susceptible to humid storage stain or white rust. SMACNA
guidelines for storage and handling of materials apply. Refer to SMACNA appendix A-5 sections 1.7, 1.8, 1.9.
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738
Page A16
1/07
PATINA CHEMICAL SOURCES
Copper will Patina naturally in most areas within 7 years when exposed to normal air quality and moisture. Areas that are dry or
at high altitudes will take longer or not react to environmental surface oxidation.
Berger Building Products, Inc provides this information as a service with the understanding that the results of the chemical
patina will vary and Berger assumes no liability.
Berger cautions the user that the user is responsible for the results. The user also must comply with all manufacturer safety
recommendations on handling and disposing of chemicals in accordance with all Local, State and Federal EPA Guidelines.
User can check for other sources on the internet, phone and industrial directories.
Triple-S Chemical Products, Inc
Los Angeles
800-862-5958
Patina Solutions
800-882-7004
Jax Chemical Co
Floral Park, NY
718-347-0057
The Copper Development Association (CDA) provides information on the use of copper for every purpose known to man at the
website:
http://www.copper.org
For specific information on architectural copper finishes go directly to:
http://www.copper.org/applications/architecture/finishes.html
(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TABLE OF CONTENTS - PA Supply Company

Transcription

Similar documents

Pole Mounted Obstruction Light

to now. - Kugel Komponents

Color your world with Euramax

Covers - Structall Building Systems, Inc.

Untitled - BBK Performance

ZZ572/720R - Crate Engine Depot

METaLMarT`S Bargain Board

6Clit Pi3349 opeciattg dough.

Gutter Machine Brochure

investors presentation – q2 2015