SOLAX HYBRID ENERGY STORAGE ARRIVES AT YHI

The Power Newsletter Of YHI New Zealand.
POWERLINE
OCTOBER 2015
SOLAX HYBRID ENERGY STORAGE ARRIVES AT YHI
A division of the Suntellite Group, SolaX is a world leader in the
development and production of PV inverters, modules and energy storage
solutions that are now available at YHI.
SolaX’s product range incorporates the very latest in solar innovation thanks
to a continued focus on R&D and commitment to pushing the boundaries
of innovation - a journey that has led to the launch of the ground-breaking
X-Hybrid battery storage system.
Committed to providing consumers with an advanced, reliable and cost
effective range of PV products and energy storage solutions, SolaX employs
more than eighty professors and senior engineers at their state of the art
production facility.
SolaX products are designed, tested and manufactured to the highest
global standards, supported by sixteen international offices and exported
to forty seven countries. After successfully launching their first X-Hybrid
energy storage inverter in 2013, SolaX rapidly gained recognition in PV
market world wide. The X-Hybrid Energy Storage Inverter was awarded
third place in the New Energy & Energy-saving Environmental Protection
Industry segment of the Third China Innovation & Entrepreneurship
Competition in 2014.
The X-Hybrid Inverters with EPS come complete with
charger and an Emergency Power Supply function
View the full range of SolaX products online at www.yhipower.co.nz
SolaX Hybrid Series with EPS
SolaX recently launched a second-generation hybrid energy management
system (EMS). The SolaX X-Hybrid 2 features several new features.
The addition of an Emergency Power Supply (EPS) feature means in the
event of a grid outage the EPS enables the system to continue supplying
electricity to important appliances like refrigerators, WiFi routers, and hot
water cylinders. The X-Hybrid 2 Series promises a higher degree of energy
independence than usually possible with a solar panel system alone.
SolaX Lithium Battery Storage allows users to maximise the
consumption of PV generated and has a small footprint designed for
residential applications.
SolaX on display at the All
Energy Conference held in
Melbourne in October
The X-Hybrid 2 inverter automatically switches between three modes
depending on battery charge state, availability of solar and electricity
demand. These modes are:
Sleep mode: If the inverter detects no electricity use for an extended
period, the EMS reverts to sleep mode, during which time it uses only
standby power consumption of 7W.
Battery winter mode: This protects the battery by controlling the amount
of current that passes through the system on cold winter days.
Battery wake up mode: If the battery loses power, it will automatically
switch into battery wake up mode, and will draw electricity from the grid to
charge the battery.
Also available from YHI are SolaX’s hybrid-ready inverters, external chargers,
lithium batteries and single phase MPPT inverter.
VISIT OUR WEBSITES www.yhipower.co.nz / www.powersystems.co.nz / www.whychoosesolar.co.nz
NEW PRODUCT NEUTON SOLAR POWER DIVERTER
YHI DEVELOPS NEUTON SOLAR POWER DIVERTER
Following recent reductions in solar buy-back rates from power providers there has been a
rise in demand to find a better use for solar energy exported back to the grid.
The Neuton Solar Power Diverter redirects surplus solar energy produced into a hot water
cylinder - from just a few watts right up to the element capacity. Consumers can enjoy
real financial benefit from installing a Neuton Solar Power Diverter by increasing the selfconsumption of PV produced by their system.
While products are available in the market the Neuton Solar Power Diverter has been
developed as a simplified product to offer functionality at an attractive price point.
Designed and built in New Zealand, the Neuton Solar Power Diverter meets NZ Electrical
Safety Standards and is available now from YHI.
INDUSTRY UPDATE ELECTRIC VEHICLES
THE EV FUTURE IS BRIGHT
OCTOBER REPORT FROM DRIVE ELECTRIC
New Zealand now has nearly 800 electric vehicles registered on NZ roads – more than double from this time
last year: Starting out as pure linear growth in 2013 and early 2014, EV registrations in New Zealand are now
getting closer to exponential in numbers, and this bodes very well for a visibly accelerated uptake across the
country.
The technology continues to improve. For example, the 2016 Nissan Leaf will have a 27% longer range than
the previous version. New models continue to come onto the market. We are seeing some of these in New
Zealand, but overseas all the major car companies now offer EV, either plug in hybrids or pure electrics. At
the Drive Electric AGM two major European car companies agreed that the future was electric. These car
companies indicated that within 2-3 years all drivetrains will be electric. We are also seeing government
demonstrate a genuine desire to engage and support electric cars.
The Ministry of Transport is convening a working group to develop a ‘NZ Inc’ package of measures to
accelerate the uptake of electric vehicles. The working group involves members from central and local
government and industry. Drive Electric will play a very active role in this dialogue.
At this stage, key issues the working group will address include:
• Joint government-business EV uptake targets – determining what is a reasonable level of uptake to
aspire towards
• Governance – establishing the best way to bring relevant public and private sector players together on
an ongoing basis to drive electric vehicle uptake
•
An NZ Inc electric vehicle package – developing a plan parties can commit to
The Ministry of Transport is working toward finalising a proposed package for consideration by Chief
Executives of working group members by the end of October 2015.
VISITORS INVITED TO PLUG IN AT YHI
DELTA EV CHARGER INSTALLED AT YHI AUCKLAND
Visitors with electric vehicles are invited to take
advantage of the newly installed Delta AC EV Charger
on their next visit to YHI’s Auckland office.
INTELLIGENT BATTERY TESTING WITH CYCLAD
Testing VRLA Battery Systems has always been a contentious talking point
amongst engineers, technicians, facilities managers and asset managers.
There are a number of methods that are used within the industry to attempt to
derive a knowledgeable result of the condition of installed batteries.
Impedance, resistive and conductance testers are most popular because
they are a method that saves time, are less labour intensive and therefore
reduce costs. These systems are best used to produce trend analysis reports
from when the battery bank is new, and all require interpretation by a
knowledgeable technician to avoid random incorrect results.
It is internationally agreed that controlled discharge of a battery is the most
informative and accurate method as it is generally done to the manufacturer’s
specification using their discharge tables in Current (AMPS) or Power (Watts).
It is with this in mind that Cyclad was developed, a very quick discharge test
that gives a percentage result meaningful to the condition of the battery. The
Cyclad tester points the way quickly and relatively inexpensively to a decision
on the next step of investigation on the integrity of the battery system.
WHY CYCLAD?
Cyclad is a microprocessor controlled (“intelligent”) load unit for testing DC battery banks with a technology called CDFA™ (Coup de Fouet Analysis*).
Using CDFA Cyclad performs a simple PASS / FAIL test on your battery bank, while still in service at the press of a button, or by remote trigger.
When ageing or damaged batteries are instantly required to supply full load, they can fail completely or their up-time (related to battery capacity) is far less
than expected.
It is possible to determine how long a battery will survive full load conditions by performing a full battery capacity test. Capacity tests are extremely risky,
as they require a full battery discharge. Combined with the time to perform the test, and then recharge the batteries after the test, this can leave the load
vulnerable. Extra measures are usually required to protect the load should a power failure occur during testing. These measures are relatively costly with
the requirement for generators, additional batteries, staffing and safety precautions. As a consequence, capacity discharge tests are not often performed.
CDFA TESTING*
CDFA is the acronym for Coup de Fouet Analysis, which is a method of observing the voltage effects on a battery that is placed under an instantaneous
load. From the simple results of the CDFA testing, it is possible to determine the heuristic condition of a battery bank and determine its potential
operational functionality under real load conditions. Once a cut-off point is reached, a battery bank will FAIL a CDFA test and consequently needs to be
serviced.
Cyclad performs a quick CDFA Test using parameters that replicate features of the instantaneous load demand placed on the battery bank. Once CDFA
test results are calculated, an investigation into a FAILED test result usually reveals faulty cells or cabling and connection problems. Appropriate and timely
action can then be taken to maintain battery bank integrity.
NOTE: CDFA Testing is done with the battery charger disconnected (automatic or manual).
Cyclad can be integrated into other hardware systems, any external device can be configured to activate the testing process. Cyclad will report the results
on the LCD and trigger appropriate output relays.
CDFA Testing also has a unique identification ID (count) and a record of the results is stored within the Cyclad Log.
Your YHI Power Sales Representative has more information on the Cyclad Load Units. We offer demonstrations of the system at our
Auckland office. Please discuss longer term on site trials with your YHI Power Sales representative – 0800 877 359
NEW PRODUCT VISION LITHIUM ION BATTERIES
FEATURES
Vision Technology provides safe Lithium Ion Phosphate battery solutions for
applications that require higher energy density, high cycle counts, space savings
or low weight. Units can be rack mounted for installation into homes, offices and
remote sites. The battery is designed for paralleling of multiple battery packs for
increased reserve time.
Vision Lithium Iron Phosphate batteries each include a built in Battery
Management System (BMS) to provide safe operation and remote monitoring.
POWERLINE The Power Newsletter Of YHI New Zealand October 2015
•
Comprehensive communication
•
Parallel operation, for scalabilty
•
Built-in automatic protection for over-charge,
•
Over-discharge and over-temperature conditions
•
State of charge and state of health indication
•
Built-in battery control for efficient operation
•
Redundant safety
•
Compatible with standard telecom rectifiers
•
Maintenance free
•
Internal cell balancing
•
Communication of monitored data via Battery
•
Management System (BMS)
EVENTS ALL ENERGY CONFERENCE MELBOURNE
DELTA DISPLAYS AT ALL ENERGY CONFERENCE MELBOURNE
Delta showcased a broad spectrum of energyefficient technologies at the All Energy 2015
Expo in Melbourne on 7 & 8 October.
Delta launched its new battery storage
technology with the Hybrid H5, featuring a RPI
E5 hybrid inverter as well as an external battery
cabinet equipped with a 7.4 kWh Li-ion battery.
Tackling efficiency in the industrial market,
Delta’s Power Quality technology featured a
live demonstration of the Active Power Filter
series, which corrects harmonics and improves
power factor in real-time to an overall efficiency
exceeding 96%.
Other product featured on the display such as
the wall-mount AC EV Charger and RPI range of
home and commercial inverters.
UPCOMING EVENTS
CONTACT US
FREEPHONE 0800 877 359
SPECIFIC PRODUCT ENQUIRIES &
TECHNICAL SUPPORT:
UPCOMING EVENTS
SEANZ SolarSMART Conference:
November 13-14 2015. Novotel Rotorua
Downstream Conference:
2 - 3 March 2016. Skytcity Convention Centre, Auckland
NORTH ISLAND:
Aaron Gillon
Mob: 027 2888 922
aarong@yhi.co.nz
NEW PRODUCT EATON DC SYSTEMS
Brad Morrison
Mob: 027 459 4495
brad@yhi.co.nz
SMARTER DC ENERGY SOLUTIONS FROM EATON
Dean Jorgensen
Mob: 021 577 755
dean@yhi.co.nz
Eaton DC Smarter Energy Solutions can provide customers with effective answers to aggressive energy saving and
carbon reduction goals.
Chris Bennett
Mob: 021 804 536
chris.bennett@yhi.co.nz
•
Over 96% efficiency of the Energy Saver Rectifier
puts Eaton DC power systems at the forefront of high
efficiency
Jasmine Smith
Mob: 021 302 663
jasmine@yhi.co.nz
•
Flexible mounting and power dense solutions for space
restricted applications
•
Award winning outdoor enclosures design expertise for
high efficiency and super quiet operation.
•
Hybrid integrated energy solutions (gen set, battery,
solar)
•
Extensive power management software solutions for
network asset optimisation
•
Unparalleled site and network energy management control features
•
Eaton Fuel Saver (EFS) for hybrid power solution optimization to dramatically reduce generator operational costs.
•
Smart Alarms provides highly configurable control and alarms for automated site management and performance
improvement
•
Advanced remote battery management including time remaining during a discharge and state of health
•
Modbus for Building Management System (BMS) software
Hayden Talbot
Mob: 021 945 665
haydentalbot@yhi.co.nz
SOUTH ISLAND:
Hayden Rayner
Mob: 027 231 2494
hayden@yhi.co.nz
YHI (New Zealand) Ltd Is A Proud Member Of:
VISIT OUR WEBSITES www.yhipower.co.nz / www.powersystems.co.nz / www.whychoosesolar.co.nz
YHI (New Zealand) Ltd Auckland Is Proud To Achieve
ECO Warranty Certification: